mediatek: remove files and patches for Linux 5.4

All subtargets only provide files and patches for Linux 5.10 by now
so there is little use for the old Linux 5.4 stuff. Remove it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

1 files changed, 0 insertions, 254 deletions

diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h
deleted file mode 100644
index f2689ebc70..0000000000
--- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Copyright (C) 2013 Realtek Semiconductor Corp.
- * All Rights Reserved.
- *
- * Unless you and Realtek execute a separate written software license
- * agreement governing use of this software, this software is licensed
- * to you under the terms of the GNU General Public License version 2,
- * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
- *
- * Purpose : RTL8367/RTL8367C switch high-level API
- *
- * Feature : The file includes Interrupt module high-layer API defination
- *
- */
-
-#ifndef __RTK_API_INTERRUPT_H__
-#define __RTK_API_INTERRUPT_H__
-
-
-/*
- * Data Type Declaration
- */
-#define RTK_MAX_NUM_OF_INTERRUPT_TYPE               1
-
-
-typedef struct  rtk_int_status_s
-{
-    rtk_uint16 value[RTK_MAX_NUM_OF_INTERRUPT_TYPE];
-} rtk_int_status_t;
-
-typedef struct rtk_int_info_s
-{
-    rtk_portmask_t  portMask;
-    rtk_uint32      meterMask;
-    rtk_uint32      systemLearnOver;
-}rtk_int_info_t;
-
-typedef enum rtk_int_type_e
-{
-    INT_TYPE_LINK_STATUS = 0,
-    INT_TYPE_METER_EXCEED,
-    INT_TYPE_LEARN_LIMIT,
-    INT_TYPE_LINK_SPEED,
-    INT_TYPE_CONGEST,
-    INT_TYPE_GREEN_FEATURE,
-    INT_TYPE_LOOP_DETECT,
-    INT_TYPE_8051,
-    INT_TYPE_CABLE_DIAG,
-    INT_TYPE_ACL,
-    INT_TYPE_RESERVED, /* Unused */
-    INT_TYPE_SLIENT,
-    INT_TYPE_END
-}rtk_int_type_t;
-
-typedef enum rtk_int_advType_e
-{
-    ADV_L2_LEARN_PORT_MASK = 0,
-    ADV_SPEED_CHANGE_PORT_MASK,
-    ADV_SPECIAL_CONGESTION_PORT_MASK,
-    ADV_PORT_LINKDOWN_PORT_MASK,
-    ADV_PORT_LINKUP_PORT_MASK,
-    ADV_METER_EXCEED_MASK,
-    ADV_RLDP_LOOPED,
-    ADV_RLDP_RELEASED,
-    ADV_END,
-} rtk_int_advType_t;
-
-typedef enum rtk_int_polarity_e
-{
-    INT_POLAR_HIGH = 0,
-    INT_POLAR_LOW,
-    INT_POLAR_END
-} rtk_int_polarity_t;
-
-/* Function Name:
- *      rtk_int_polarity_set
- * Description:
- *      Set interrupt polarity configuration.
- * Input:
- *      type - Interruptpolarity type.
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      The API can set interrupt polarity configuration.
- */
-extern rtk_api_ret_t rtk_int_polarity_set(rtk_int_polarity_t type);
-
-/* Function Name:
- *      rtk_int_polarity_get
- * Description:
- *      Get interrupt polarity configuration.
- * Input:
- *      None
- * Output:
- *      pType - Interruptpolarity type.
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- * Note:
- *      The API can get interrupt polarity configuration.
- */
-extern rtk_api_ret_t rtk_int_polarity_get(rtk_int_polarity_t *pType);
-
-/* Function Name:
- *      rtk_int_control_set
- * Description:
- *      Set interrupt trigger status configuration.
- * Input:
- *      type - Interrupt type.
- *      enable - Interrupt status.
- * Output:
- *      None
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- *      RT_ERR_ENABLE       - Invalid enable input.
- * Note:
- *      The API can set interrupt status configuration.
- *      The interrupt trigger status is shown in the following:
- *      - INT_TYPE_LINK_STATUS
- *      - INT_TYPE_METER_EXCEED
- *      - INT_TYPE_LEARN_LIMIT
- *      - INT_TYPE_LINK_SPEED
- *      - INT_TYPE_CONGEST
- *      - INT_TYPE_GREEN_FEATURE
- *      - INT_TYPE_LOOP_DETECT
- *      - INT_TYPE_8051,
- *      - INT_TYPE_CABLE_DIAG,
- *      - INT_TYPE_ACL,
- *      - INT_TYPE_SLIENT
- */
-extern rtk_api_ret_t rtk_int_control_set(rtk_int_type_t type, rtk_enable_t enable);
-
-/* Function Name:
- *      rtk_int_control_get
- * Description:
- *      Get interrupt trigger status configuration.
- * Input:
- *      type - Interrupt type.
- * Output:
- *      pEnable - Interrupt status.
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      The API can get interrupt status configuration.
- *      The interrupt trigger status is shown in the following:
- *      - INT_TYPE_LINK_STATUS
- *      - INT_TYPE_METER_EXCEED
- *      - INT_TYPE_LEARN_LIMIT
- *      - INT_TYPE_LINK_SPEED
- *      - INT_TYPE_CONGEST
- *      - INT_TYPE_GREEN_FEATURE
- *      - INT_TYPE_LOOP_DETECT
- *      - INT_TYPE_8051,
- *      - INT_TYPE_CABLE_DIAG,
- *      - INT_TYPE_ACL,
- *      - INT_TYPE_SLIENT
- */
-extern rtk_api_ret_t rtk_int_control_get(rtk_int_type_t type, rtk_enable_t* pEnable);
-
-/* Function Name:
- *      rtk_int_status_set
- * Description:
- *      Set interrupt trigger status to clean.
- * Input:
- *      None
- * Output:
- *      pStatusMask - Interrupt status bit mask.
- * Return:
- *      RT_ERR_OK              - OK
- *      RT_ERR_FAILED          - Failed
- *      RT_ERR_SMI             - SMI access error
- *      RT_ERR_INPUT - Invalid input parameters.
- * Note:
- *      The API can clean interrupt trigger status when interrupt happened.
- *      The interrupt trigger status is shown in the following:
- *      - INT_TYPE_LINK_STATUS    (value[0] (Bit0))
- *      - INT_TYPE_METER_EXCEED   (value[0] (Bit1))
- *      - INT_TYPE_LEARN_LIMIT    (value[0] (Bit2))
- *      - INT_TYPE_LINK_SPEED     (value[0] (Bit3))
- *      - INT_TYPE_CONGEST        (value[0] (Bit4))
- *      - INT_TYPE_GREEN_FEATURE  (value[0] (Bit5))
- *      - INT_TYPE_LOOP_DETECT    (value[0] (Bit6))
- *      - INT_TYPE_8051           (value[0] (Bit7))
- *      - INT_TYPE_CABLE_DIAG     (value[0] (Bit8))
- *      - INT_TYPE_ACL            (value[0] (Bit9))
- *      - INT_TYPE_SLIENT         (value[0] (Bit11))
- *      The status will be cleared after execute this API.
- */
-extern rtk_api_ret_t rtk_int_status_set(rtk_int_status_t *pStatusMask);
-
-/* Function Name:
- *      rtk_int_status_get
- * Description:
- *      Get interrupt trigger status.
- * Input:
- *      None
- * Output:
- *      pStatusMask - Interrupt status bit mask.
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      The API can get interrupt trigger status when interrupt happened.
- *      The interrupt trigger status is shown in the following:
- *      - INT_TYPE_LINK_STATUS    (value[0] (Bit0))
- *      - INT_TYPE_METER_EXCEED   (value[0] (Bit1))
- *      - INT_TYPE_LEARN_LIMIT    (value[0] (Bit2))
- *      - INT_TYPE_LINK_SPEED     (value[0] (Bit3))
- *      - INT_TYPE_CONGEST        (value[0] (Bit4))
- *      - INT_TYPE_GREEN_FEATURE  (value[0] (Bit5))
- *      - INT_TYPE_LOOP_DETECT    (value[0] (Bit6))
- *      - INT_TYPE_8051           (value[0] (Bit7))
- *      - INT_TYPE_CABLE_DIAG     (value[0] (Bit8))
- *      - INT_TYPE_ACL            (value[0] (Bit9))
- *      - INT_TYPE_SLIENT         (value[0] (Bit11))
- *
- */
-extern rtk_api_ret_t rtk_int_status_get(rtk_int_status_t* pStatusMask);
-
-/* Function Name:
- *      rtk_int_advanceInfo_get
- * Description:
- *      Get interrupt advanced information.
- * Input:
- *      adv_type - Advanced interrupt type.
- * Output:
- *      info - Information per type.
- * Return:
- *      RT_ERR_OK           - OK
- *      RT_ERR_FAILED       - Failed
- *      RT_ERR_SMI          - SMI access error
- *      RT_ERR_INPUT        - Invalid input parameters.
- * Note:
- *      This API can get advanced information when interrupt happened.
- *      The status will be cleared after execute this API.
- */
-extern rtk_api_ret_t rtk_int_advanceInfo_get(rtk_int_advType_t adv_type, rtk_int_info_t* info);
-
-
-#endif /* __RTK_API_INTERRUPT_H__ */