mediatek: split base-files into subtargets

This splits some base-files across subtargets, as done previously
on ath79 and ramips and also introduced for mt7629 subtarget here
already. Most of the existing base-files content is specific to
mt7623.

While at it, apply the following fixes:
- Remove lots of trailing whitespaces
- Remove wildcard on unielec,u7623-02-emmc-512m
- Remove inconsistent quotation marks in cases

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: John Crispin <john@phrozen.org>

4 files changed, 0 insertions, 177 deletions

diff --git a/target/linux/mediatek/base-files/etc/board.d/02_network b/target/linux/mediatek/base-files/etc/board.d/02_network
deleted file mode 100755
index faa2434241..0000000000
--- a/target/linux/mediatek/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-
-mediatek_setup_interfaces()
-{
-	local board="$1"
-
-	case $board in
-	'mediatek,mt7623a-rfb-emmc')
-		ucidef_set_interface_lan "lan0 lan1 lan2 lan3"
-		ucidef_set_interface_wan eth1
-		;;
-	'bananapi,bpi-r2'|\
-	"unielec,u7623"*)
-		ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan"
-		;;
-	esac
-}
-
-mediatek_setup_macs()
-{
-	local board="$1"
-
-	case $board in
-	"unielec,u7623"*)
-		mac=$(cat /sys/class/net/wan/address)
-		ucidef_set_interface_macaddr "wan" $mac
-		;;
-	esac
-}
-
-board_config_update
-board=$(board_name)
-mediatek_setup_interfaces $board
-mediatek_setup_macs $board
-board_config_flush
-
-exit 0
diff --git a/target/linux/mediatek/base-files/lib/preinit/07_set_iface_mac b/target/linux/mediatek/base-files/lib/preinit/07_set_iface_mac
deleted file mode 100644
index 3d04000738..0000000000
--- a/target/linux/mediatek/base-files/lib/preinit/07_set_iface_mac
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2018 OpenWrt.org
-
-RECOVERY_PART=/dev/mmcblk0p1
-
-preinit_set_mac_address() {
-	local mac
-
-	. /lib/functions.sh
-	. /lib/functions/system.sh
-
-	case $(board_name) in
-	"unielec,u7623"*)
-		if [ -b $RECOVERY_PART ]; then
-			insmod nls_cp437
-			insmod nls_iso8859-1
-			insmod fat
-			insmod vfat
-			mkdir -p /tmp/recovery
-			mount -o rw,noatime $RECOVERY_PART /tmp/recovery
-
-			if [ -f "/tmp/recovery/mac_addr" ];
-			then
-				mac=$(cat /tmp/recovery/mac_addr)
-			else
-				mac=$(cat /sys/class/net/eth0/address)
-				echo "$mac" > /tmp/recovery/mac_addr
-			fi
-
-			sync
-			umount /tmp/recovery
-			rm -rf /tmp/recovery
-		fi
-
-		ip link set dev wan address $mac 2> /dev/null
-
-		mac=$(macaddr_add $mac 1)
-
-		ip link set dev lan0 address $mac 2>/dev/null
-		ip link set dev lan1 address $mac 2>/dev/null
-		ip link set dev lan2 address $mac 2>/dev/null
-		ip link set dev lan3 address $mac 2>/dev/null
-		;;
-	esac
-}
-
-boot_hook_add preinit_main preinit_set_mac_address
diff --git a/target/linux/mediatek/base-files/lib/preinit/79_move_config b/target/linux/mediatek/base-files/lib/preinit/79_move_config
deleted file mode 100644
index 617336583e..0000000000
--- a/target/linux/mediatek/base-files/lib/preinit/79_move_config
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2015 OpenWrt.org
-
-. /lib/upgrade/common.sh
-
-RECOVERY_PART=/dev/mmcblk0p1
-
-move_config() {
-	if [ -b $RECOVERY_PART ]; then
-		insmod nls_cp437
-		insmod nls_iso8859-1
-		insmod fat
-		insmod vfat
-		mkdir -p /recovery
-		mount -o rw,noatime $RECOVERY_PART /recovery
-		[ -f "/recovery/$BACKUP_FILE" ] && mv -f "/recovery/$BACKUP_FILE" /
-		umount /recovery
-	fi
-}
-
-boot_hook_add preinit_mount_root move_config
diff --git a/target/linux/mediatek/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/base-files/lib/upgrade/platform.sh
deleted file mode 100755
index 9c99ee1c18..0000000000
--- a/target/linux/mediatek/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,68 +0,0 @@
-platform_do_upgrade() {                 
-	local board=$(board_name)
-	case "$board" in
-	"unielec,u7623"*)
-		#Keep the persisten random mac address (if it exists)
-		mkdir -p /tmp/recovery
-		mount -o rw,noatime /dev/mmcblk0p1 /tmp/recovery
-		[ -f "/tmp/recovery/mac_addr" ] && \
-			mv -f /tmp/recovery/mac_addr /tmp/
-		umount /tmp/recovery
-
-		#1310720 is the offset in bytes from the start of eMMC and to
-		#the location of the kernel (2560 512 byte sectors)
-		get_image "$1" | dd of=/dev/mmcblk0 bs=1310720 seek=1 conv=fsync
-
-		mount -o rw,noatime /dev/mmcblk0p1 /tmp/recovery
-		[ -f "/tmp/mac_addr" ] && mv -f /tmp/mac_addr /tmp/recovery
-		sync
-		umount /tmp/recovery
-		;;
-	*)
-		default_do_upgrade "$1"
-		;;
-	esac
-}
-
-PART_NAME=firmware
-
-platform_check_image() {                                                         
-	local board=$(board_name)                                                
-	local magic="$(get_magic_long "$1")"                                     
-
-	[ "$#" -gt 1 ] && return 1                                               
-
-	case "$board" in                                                       
-	bananapi,bpi-r2|\
-	"unielec,u7623"*)
-		[ "$magic" != "27051956" ] && {   
-			echo "Invalid image type."
-			return 1                                     
-		}                                                    
-		return 0                                             
-		;;                                                   
-
-	*)                                                           
-		echo "Sysupgrade is not supported on your board yet."
-		return 1                                             
-		;;                                
-	esac                                      
-
-	return 0                                                                                         
-}
-
-platform_copy_config_emmc() {
-	mkdir -p /recovery
-	mount -o rw,noatime /dev/mmcblk0p1 /recovery
-	cp -af "$UPGRADE_BACKUP" "/recovery/$BACKUP_FILE"
-	sync
-	umount /recovery
-}
-
-platform_copy_config() {
-	case "$(board_name)" in
-	"unielec,u7623"*)
-		platform_copy_config_emmc
-		;;
-	esac
-}