mcs814x: Remove unmaintained target

This target only supports kernel 3.18, which is not supported in OpenWrt
any more for multiple releases. It also looks like there is no active
maintainer for this target.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

10 files changed, 0 insertions, 328 deletions

diff --git a/target/linux/mcs814x/patches-3.18/001-platform.patch b/target/linux/mcs814x/patches-3.18/001-platform.patch
deleted file mode 100644
index 83f1683b05..0000000000
--- a/target/linux/mcs814x/patches-3.18/001-platform.patch
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -267,7 +267,8 @@ config PHYS_OFFSET
- 			ARCH_INTEGRATOR || \
- 			ARCH_IOP13XX || \
- 			ARCH_KS8695 || \
--			(ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
-+			(ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET) || \
-+			ARCH_MCS814X
- 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
- 	default 0x20000000 if ARCH_S5PV210
- 	default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
-@@ -786,6 +787,21 @@ config ARCH_OMAP1
- 	help
- 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
- 
-+config ARCH_MCS814X
-+	bool "Moschip MCS814x"
-+	select FIQ
-+	select GENERIC_IRQ_CHIP
-+	select GENERIC_GPIO
-+	select ARCH_REQUIRE_GPIOLIB
-+	select CLKDEV_LOOKUP
-+	select ARCH_USES_GETTIMEOFFSET
-+	select USB_ARCH_HAS_OHCI
-+	select USB_ARCH_HAS_EHCI
-+	select MULTI_IRQ_HANDLER
-+	help
-+	  Support for Moschip MCS814x SoCs (MCS8140).
-+
-+
- endchoice
- 
- menu "Multiple platform selection"
-@@ -927,6 +943,8 @@ source "arch/arm/mach-picoxcell/Kconfig"
- source "arch/arm/mach-pxa/Kconfig"
- source "arch/arm/plat-pxa/Kconfig"
- 
-+source "arch/arm/mach-mcs814x/Kconfig"
-+
- source "arch/arm/mach-mmp/Kconfig"
- 
- source "arch/arm/mach-qcom/Kconfig"
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
- machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
- machine-$(CONFIG_ARCH_KS8695)		+= ks8695
- machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
-+machine-$(CONFIG_ARCH_MCS814X)		+= mcs814x
- machine-$(CONFIG_ARCH_MESON)		+= meson
- machine-$(CONFIG_ARCH_MMP)		+= mmp
- machine-$(CONFIG_ARCH_MOXART)		+= moxart
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -163,6 +163,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- 	kirkwood-ts419-6282.dtb
- dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
- dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
-+dtb-$(CONFIG_ARCH_MCS814X) += dlan-usb-extender.dtb \
-+	rbt-832.dtb
- dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb
- dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
- dtb-$(CONFIG_ARCH_MXC) += \
diff --git a/target/linux/mcs814x/patches-3.18/003-ethernet.patch b/target/linux/mcs814x/patches-3.18/003-ethernet.patch
deleted file mode 100644
index 3ee8cd6b35..0000000000
--- a/target/linux/mcs814x/patches-3.18/003-ethernet.patch
+++ /dev/null
@@ -1,16 +0,0 @@
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -186,4 +186,6 @@ source "drivers/net/ethernet/wiznet/Kcon
- source "drivers/net/ethernet/xilinx/Kconfig"
- source "drivers/net/ethernet/xircom/Kconfig"
- 
-+source "drivers/net/ethernet/mcs8140/Kconfig"
-+
- endif # ETHERNET
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -84,3 +84,4 @@ obj-$(CONFIG_NET_VENDOR_VIA) += via/
- obj-$(CONFIG_NET_VENDOR_WIZNET) += wiznet/
- obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
- obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
-+obj-$(CONFIG_NUPORT_ETHERNET_DRIVER) += mcs8140/
diff --git a/target/linux/mcs814x/patches-3.18/004-usb.patch b/target/linux/mcs814x/patches-3.18/004-usb.patch
deleted file mode 100644
index 410c53085d..0000000000
--- a/target/linux/mcs814x/patches-3.18/004-usb.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1298,6 +1298,11 @@ MODULE_LICENSE ("GPL");
- #define	PLATFORM_DRIVER		ehci_hcd_sead3_driver
- #endif
- 
-+#ifdef CONFIG_ARCH_MCS814X
-+#include "ehci-mcs814x.c"
-+#define PLATFORM_DRIVER		mcs814x_ehci_driver
-+#endif
-+
- static int __init ehci_hcd_init(void)
- {
- 	int retval = 0;
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1260,6 +1260,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER		ohci_hcd_tilegx_driver
- #endif
- 
-+#ifdef CONFIG_ARCH_MCS814X
-+#include "ohci-mcs814x.c"
-+#define PLATFORM_DRIVER		ohci_hcd_mcs814x_driver
-+#endif
-+
- static int __init ohci_hcd_mod_init(void)
- {
- 	int retval = 0;
diff --git a/target/linux/mcs814x/patches-3.18/005-mcs814x_rng.patch b/target/linux/mcs814x/patches-3.18/005-mcs814x_rng.patch
deleted file mode 100644
index 4af3d86839..0000000000
--- a/target/linux/mcs814x/patches-3.18/005-mcs814x_rng.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/char/hw_random/Kconfig
-+++ b/drivers/char/hw_random/Kconfig
-@@ -229,6 +229,18 @@ config HW_RANDOM_TX4939
- 
- 	  If unsure, say Y.
- 
-+config HW_RANDOM_MCS814X
-+	tristate "Moschip MCS814x Random Number Generator"
-+	depends on HW_RANDOM && ARCH_MCS814X
-+	---help---
-+	  This driver provides kernel-side support for the Random Number
-+	  Generator hardware found on Moschip MCS814x processors.
-+
-+	  To compile this driver as a module, choose M here: the
-+	  module will be called mcs814x-rng.
-+
-+	  If unusure, say Y.
-+
- config HW_RANDOM_MXC_RNGA
- 	tristate "Freescale i.MX RNGA Random Number Generator"
- 	depends on ARCH_HAS_RNGA
---- a/drivers/char/hw_random/Makefile
-+++ b/drivers/char/hw_random/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += oma
- obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
- obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
- obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
-+obj-$(CONFIG_HW_RANDOM_MCS814X) += mcs814x-rng.o
- obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
- obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
- obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
diff --git a/target/linux/mcs814x/patches-3.18/006-mcs814x_wdt.patch b/target/linux/mcs814x/patches-3.18/006-mcs814x_wdt.patch
deleted file mode 100644
index 72481f6b89..0000000000
--- a/target/linux/mcs814x/patches-3.18/006-mcs814x_wdt.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -505,6 +505,12 @@ config MESON_WATCHDOG
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called meson_wdt.
- 
-+config MCS814X_WATCHDOG
-+	tristate "Moschip MCS814x watchdog"
-+	depends on WATCHDOG_CORE && ARCH_MCS814X
-+	help
-+	  Support for the Moschip MCS814x SoCs on-chip watchdog timer.
-+
- # AVR32 Architecture
- 
- config AT32AP700X_WDT
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
- obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
- obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
- obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
-+obj-$(CONFIG_MCS814X_WATCHDOG) += mcs814x_wdt.o
- 
- # AVR32 Architecture
- obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/target/linux/mcs814x/patches-3.18/008-mcs814x_gpio.patch b/target/linux/mcs814x/patches-3.18/008-mcs814x_gpio.patch
deleted file mode 100644
index f0944bffd3..0000000000
--- a/target/linux/mcs814x/patches-3.18/008-mcs814x_gpio.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -820,6 +820,12 @@ config GPIO_MC33880
- 	  SPI driver for Freescale MC33880 high-side/low-side switch.
- 	  This provides GPIO interface supporting inputs and outputs.
- 
-+config GPIO_MCS814X
-+	tristate "Moschip MCS814x GPIO support"
-+	depends on ARCH_MCS814X
-+	help
-+	   GPIO driver for Moschip MCS814x SoC gpio controllers.
-+
- config GPIO_74X164
- 	tristate "74x164 serial-in/parallel-out 8-bits shift register"
- 	depends on SPI_MASTER && OF
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_GPIO_MAX732X)	+= gpio-max73
- obj-$(CONFIG_GPIO_MC33880)	+= gpio-mc33880.o
- obj-$(CONFIG_GPIO_MC9S08DZ60)	+= gpio-mc9s08dz60.o
- obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
-+obj-$(CONFIG_GPIO_MCS814X)	+= gpio-mcs814x.o
- obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
- obj-$(CONFIG_GPIO_MM_LANTIQ)	+= gpio-mm-lantiq.o
- obj-$(CONFIG_GPIO_MOXART)	+= gpio-moxart.o
diff --git a/target/linux/mcs814x/patches-3.18/011-mcs814x_internal_phy.patch b/target/linux/mcs814x/patches-3.18/011-mcs814x_internal_phy.patch
deleted file mode 100644
index 20d5add206..0000000000
--- a/target/linux/mcs814x/patches-3.18/011-mcs814x_internal_phy.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -164,6 +164,10 @@ config RTL8306_PHY
- 	tristate "Driver for Realtek RTL8306S switches"
- 	select SWCONFIG
- 
-+config MCS814X_PHY
-+	tristate "Driver for the Moschip MCS814x internal PHY"
-+	depends on ARCH_MCS814X
-+
- config FIXED_PHY
- 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- 	depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -51,3 +51,4 @@ obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o
- obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
- obj-$(CONFIG_AMD_XGBE_PHY)	+= amd-xgbe-phy.o
- obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
-+obj-$(CONFIG_MCS814X_PHY)	+= mcs814x.o
diff --git a/target/linux/mcs814x/patches-3.18/012-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/mcs814x/patches-3.18/012-mtd-cfi_cmdset_0002-force-word-write.patch
deleted file mode 100644
index 6269e40a09..0000000000
--- a/target/linux/mcs814x/patches-3.18/012-mtd-cfi_cmdset_0002-force-word-write.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -40,9 +40,9 @@
- #include <linux/mtd/xip.h>
- 
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
- 
--#define MAX_RETRIES 3
-+#define MAX_RETRIES 10
- 
- #define SST49LF004B	        0x0060
- #define SST49LF040B	        0x0050
diff --git a/target/linux/mcs814x/patches-3.18/013-ohci_workarounds.patch b/target/linux/mcs814x/patches-3.18/013-ohci_workarounds.patch
deleted file mode 100644
index 9d4982b0fb..0000000000
--- a/target/linux/mcs814x/patches-3.18/013-ohci_workarounds.patch
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -122,7 +122,7 @@ struct td {
- 	/* PSW is only for ISO.  Only 1 PSW entry is used, but on
- 	 * big-endian PPC hardware that's the second entry.
- 	 */
--#define MAXPSW	2
-+#define MAXPSW	8
- 	__hc16		hwPSW [MAXPSW];
- 
- 	/* rest are purely for the driver's use */
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -441,6 +441,7 @@ static int ohci_init (struct ohci_hcd *o
- {
- 	int ret;
- 	struct usb_hcd *hcd = ohci_to_hcd(ohci);
-+	u32 hcca_area;
- 
- 	/* Accept arbitrarily long scatter-gather lists */
- 	if (!(hcd->driver->flags & HCD_LOCAL_MEM))
-@@ -502,11 +503,13 @@ static int ohci_init (struct ohci_hcd *o
- 			(unsigned long) ohci);
- 	set_timer_slack(&ohci->io_watchdog, msecs_to_jiffies(20));
- 
--	ohci->hcca = dma_alloc_coherent (hcd->self.controller,
--			sizeof(*ohci->hcca), &ohci->hcca_dma, GFP_KERNEL);
-+	hcca_area = ohci_readl(ohci, &ohci->regs->hcca);
-+	ohci->hcca = ioremap_nocache(hcca_area, sizeof *ohci->hcca);
- 	if (!ohci->hcca)
- 		return -ENOMEM;
- 
-+	ohci->hcca_dma = hcca_area;
-+
- 	if ((ret = ohci_mem_init (ohci)) < 0)
- 		ohci_stop (hcd);
- 	else {
-@@ -524,6 +527,7 @@ static int ohci_init (struct ohci_hcd *o
-  */
- static int ohci_run (struct ohci_hcd *ohci)
- {
-+	int			i = 0;
- 	u32			mask, val;
- 	int			first = ohci->fminterval == 0;
- 	struct usb_hcd		*hcd = ohci_to_hcd(ohci);
-@@ -574,6 +578,8 @@ static int ohci_run (struct ohci_hcd *oh
- 	msleep(val);
- 
- 	memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
-+	for (i = 0; i < NUM_INTS; i++)
-+		ohci->hcca->int_table[i] = 0;
- 
- 	/* 2msec timelimit here means no irqs/preempt */
- 	spin_lock_irq (&ohci->lock);
-@@ -985,9 +991,6 @@ static void ohci_stop (struct usb_hcd *h
- 	remove_debug_files (ohci);
- 	ohci_mem_cleanup (ohci);
- 	if (ohci->hcca) {
--		dma_free_coherent (hcd->self.controller,
--				sizeof *ohci->hcca,
--				ohci->hcca, ohci->hcca_dma);
- 		ohci->hcca = NULL;
- 		ohci->hcca_dma = 0;
- 	}
diff --git a/target/linux/mcs814x/patches-3.18/014-debuguart.patch b/target/linux/mcs814x/patches-3.18/014-debuguart.patch
deleted file mode 100644
index 5f1b67f306..0000000000
--- a/target/linux/mcs814x/patches-3.18/014-debuguart.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/mach-mcs814x/include/mach/debug-macro.S
-+++ /dev/null
-@@ -1,11 +0,0 @@
--#include <mach/mcs814x.h>
--
--                .macro  addruart, rp, rv, tmp
--		ldr	\rp, =MCS814X_PHYS_BASE
--		ldr	\rv, =MCS814X_VIRT_BASE
--		orr	\rp, \rp, #MCS814X_UART
--		orr	\rv, \rv, #MCS814X_UART
--                .endm
--
--#define UART_SHIFT	2
--#include <asm/hardware/debug-8250.S>
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -1089,7 +1089,7 @@ config DEBUG_UART_8250
- 		(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
- 		ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
- 		ARCH_IOP33X || ARCH_IXP4XX || \
--		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
-+		ARCH_LPC32XX || ARCH_MCS814X || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
- 
- # Compatibility options for BCM63xx
- config DEBUG_UART_BCM63XX
-@@ -1124,6 +1124,7 @@ config DEBUG_UART_PHYS
- 	default 0x3e000000 if DEBUG_BCM_KONA_UART
- 	default 0x4000e400 if DEBUG_LL_UART_EFM32
- 	default 0x40090000 if ARCH_LPC32XX
-+	default 0x400dc000 if ARCH_MCS814X
- 	default 0x40100000 if DEBUG_PXA_UART1
- 	default 0x42000000 if ARCH_GEMINI
- 	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-@@ -1178,6 +1179,7 @@ config DEBUG_UART_VIRT
- 	default 0xe0010fe0 if ARCH_RPC
- 	default 0xe1000000 if DEBUG_MSM_UART
- 	default 0xf0000be0 if ARCH_EBSA110
-+	default 0xf00dc000 if ARCH_MCS814X
- 	default 0xf01fb000 if DEBUG_NOMADIK_UART
- 	default 0xf0201000 if DEBUG_BCM2835
- 	default 0xf1000300 if DEBUG_BCM_5301X