kernel: bump 5.4 to 5.4.203

Merged upstream:
 bcm27xx/patches-5.4/950-1014-Revert-mailbox-avoid-timer-start-from-callback.patch
 generic/backport-5.4/080-wireguard-0021-crypto-blake2s-generic-C-library-implementation-and-.patch

Manually adapted:
 layerscape/patches-5.4/801-audio-0005-Revert-ASoC-fsl_sai-Add-support-for-SAI-new-version.patch
 oxnas/patches-5.4/100-oxnas-clk-plla-pllb.patch

Compile-tested: lantiq/xrx200
Run-tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 12 insertions, 12 deletions

diff --git a/target/linux/layerscape/patches-5.4/819-uart-0009-MLK-17133-02-tty-serial-lpuart-add-runtime-pm-suppor.patch b/target/linux/layerscape/patches-5.4/819-uart-0009-MLK-17133-02-tty-serial-lpuart-add-runtime-pm-suppor.patch
index 5c0329583b..635dfeb661 100644
--- a/target/linux/layerscape/patches-5.4/819-uart-0009-MLK-17133-02-tty-serial-lpuart-add-runtime-pm-suppor.patch
+++ b/target/linux/layerscape/patches-5.4/819-uart-0009-MLK-17133-02-tty-serial-lpuart-add-runtime-pm-suppor.patch
@@ -22,7 +22,7 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
  
  #define DRIVER_NAME	"fsl-lpuart"
  #define DEV_NAME	"ttyLP"
-@@ -859,6 +860,20 @@ static void lpuart32_start_tx(struct uar
+@@ -856,6 +857,20 @@ static void lpuart32_start_tx(struct uar
  	}
  }
  
@@ -43,7 +43,7 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
  /* return TIOCSER_TEMT when transmitter is not busy */
  static unsigned int lpuart_tx_empty(struct uart_port *port)
  {
-@@ -2283,6 +2298,7 @@ static const struct uart_ops lpuart_pops
+@@ -2280,6 +2295,7 @@ static const struct uart_ops lpuart_pops
  	.break_ctl	= lpuart_break_ctl,
  	.startup	= lpuart_startup,
  	.shutdown	= lpuart_shutdown,
@@ -51,7 +51,7 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
  	.set_termios	= lpuart_set_termios,
  	.type		= lpuart_type,
  	.request_port	= lpuart_request_port,
-@@ -2307,6 +2323,7 @@ static const struct uart_ops lpuart32_po
+@@ -2304,6 +2320,7 @@ static const struct uart_ops lpuart32_po
  	.break_ctl	= lpuart32_break_ctl,
  	.startup	= lpuart32_startup,
  	.shutdown	= lpuart32_shutdown,
@@ -59,7 +59,7 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
  	.set_termios	= lpuart32_set_termios,
  	.type		= lpuart_type,
  	.request_port	= lpuart_request_port,
-@@ -2769,6 +2786,11 @@ static int lpuart_probe(struct platform_
+@@ -2761,6 +2778,11 @@ static int lpuart_probe(struct platform_
  	if (ret)
  		goto failed_irq_request;
  
@@ -71,7 +71,7 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
  	ret = uart_add_one_port(&lpuart_reg, &sport->port);
  	if (ret)
  		goto failed_attach_port;
-@@ -2803,6 +2825,9 @@ static int lpuart_probe(struct platform_
+@@ -2795,6 +2817,9 @@ static int lpuart_probe(struct platform_
  failed_reset:
  	uart_remove_one_port(&lpuart_reg, &sport->port);
  failed_attach_port:
@@ -80,8 +80,8 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
 +	pm_runtime_dont_use_autosuspend(&pdev->dev);
  failed_irq_request:
  	lpuart_disable_clks(sport);
- failed_clock_enable:
-@@ -2829,15 +2854,41 @@ static int lpuart_remove(struct platform
+ 	return ret;
+@@ -2814,15 +2839,41 @@ static int lpuart_remove(struct platform
  	if (sport->dma_rx_chan)
  		dma_release_channel(sport->dma_rx_chan);
  
@@ -123,7 +123,7 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
  
  	if (lpuart_is_32(sport)) {
  		/* disable Rx/Tx and interrupts */
-@@ -2851,10 +2902,14 @@ static int lpuart_suspend(struct device
+@@ -2836,10 +2887,14 @@ static int lpuart_suspend(struct device
  		writeb(temp, sport->port.membase + UARTCR2);
  	}
  
@@ -138,7 +138,7 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
  
  	if (sport->lpuart_dma_rx_use) {
  		/*
-@@ -2885,9 +2940,6 @@ static int lpuart_suspend(struct device
+@@ -2870,9 +2925,6 @@ static int lpuart_suspend(struct device
  		dmaengine_terminate_all(sport->dma_tx_chan);
  	}
  
@@ -148,7 +148,7 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
  	return 0;
  }
  
-@@ -2895,9 +2947,11 @@ static int lpuart_resume(struct device *
+@@ -2880,9 +2932,11 @@ static int lpuart_resume(struct device *
  {
  	struct lpuart_port *sport = dev_get_drvdata(dev);
  	bool irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq));
@@ -162,7 +162,7 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
  
  	if (lpuart_is_32(sport))
  		lpuart32_setup_watermark_enable(sport);
-@@ -2918,13 +2972,23 @@ static int lpuart_resume(struct device *
+@@ -2903,13 +2957,23 @@ static int lpuart_resume(struct device *
  	if (lpuart_is_32(sport))
  		lpuart32_configure(sport);
  
@@ -188,7 +188,7 @@ Reviewed-by: Robin Gong <yibin.gong@nxp.com>
  
  static struct platform_driver lpuart_driver = {
  	.probe		= lpuart_probe,
-@@ -2932,7 +2996,7 @@ static struct platform_driver lpuart_dri
+@@ -2917,7 +2981,7 @@ static struct platform_driver lpuart_dri
  	.driver		= {
  		.name	= "fsl-lpuart",
  		.of_match_table = lpuart_dt_ids,