kernel: bump 5.4 to 5.4.79

Manually rebased patches:
  ath79/patches-5.4/910-unaligned_access_hacks.patch
  bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch
  bcm27xx/patches-5.4/950-0414-SQUASH-Fix-spi-driver-compiler-warnings.patch
  ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch

Removed since could be reverse-applied by quilt and found to be included upstream:
  ipq806x/patches-5.4/096-PCI-qcom-Make-sure-PCIe-is-reset-before-init-for-rev.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
[refresh altered targets after rebase]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 3 insertions, 3 deletions

diff --git a/target/linux/layerscape/patches-5.4/802-can-0022-can-flexcan-add-Transceiver-Delay-Compensation-suopp.patch b/target/linux/layerscape/patches-5.4/802-can-0022-can-flexcan-add-Transceiver-Delay-Compensation-suopp.patch
index ee00ddb5ac..dcdc1647aa 100644
--- a/target/linux/layerscape/patches-5.4/802-can-0022-can-flexcan-add-Transceiver-Delay-Compensation-suopp.patch
+++ b/target/linux/layerscape/patches-5.4/802-can-0022-can-flexcan-add-Transceiver-Delay-Compensation-suopp.patch
@@ -31,7 +31,7 @@ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
  
  /* FLEXCAN FD Bit Timing register (FDCBT) bits */
  #define FLEXCAN_FDCBT_FPRESDIV(x)	(((x) & 0x3ff) << 20)
-@@ -1101,7 +1104,7 @@ static void flexcan_set_bittiming(struct
+@@ -1100,7 +1103,7 @@ static void flexcan_set_bittiming(struct
  	struct can_bittiming *bt = &priv->can.bittiming;
  	struct can_bittiming *dbt = &priv->can.data_bittiming;
  	struct flexcan_regs __iomem *regs = priv->regs;
@@ -40,7 +40,7 @@ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
  
  	reg = priv->read(&regs->ctrl);
  	reg &= ~(FLEXCAN_CTRL_LPB | FLEXCAN_CTRL_SMP | FLEXCAN_CTRL_LOM);
-@@ -1173,6 +1176,19 @@ static void flexcan_set_bittiming(struct
+@@ -1172,6 +1175,19 @@ static void flexcan_set_bittiming(struct
  					FLEXCAN_FDCBT_FPROPSEG(dbt->prop_seg);
  			priv->write(reg_fdcbt, &regs->fdcbt);
  
@@ -60,7 +60,7 @@ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
  			if (bt->brp != dbt->brp)
  				netdev_warn(dev, "Warning!! data brp = %d and brp = %d don't match.\n"
  					    "flexcan may not work. consider using different bitrate or data bitrate\n",
-@@ -1322,6 +1338,7 @@ static int flexcan_chip_start(struct net
+@@ -1321,6 +1337,7 @@ static int flexcan_chip_start(struct net
  	/* FDCTRL */
  	if (priv->can.ctrlmode_supported & CAN_CTRLMODE_FD) {
  		reg_fdctrl = priv->read(&regs->fdctrl) & ~FLEXCAN_FDCTRL_FDRATE;