layerscape: add patches-5.4

Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release
which was tagged LSDK-20.04-V5.4.
https://source.codeaurora.org/external/qoriq/qoriq-components/linux/

For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in
LSDK, port the dts patches from 4.14.

The patches are sorted into the following categories:
  301-arch-xxxx
  302-dts-xxxx
  303-core-xxxx
  701-net-xxxx
  801-audio-xxxx
  802-can-xxxx
  803-clock-xxxx
  804-crypto-xxxx
  805-display-xxxx
  806-dma-xxxx
  807-gpio-xxxx
  808-i2c-xxxx
  809-jailhouse-xxxx
  810-keys-xxxx
  811-kvm-xxxx
  812-pcie-xxxx
  813-pm-xxxx
  814-qe-xxxx
  815-sata-xxxx
  816-sdhc-xxxx
  817-spi-xxxx
  818-thermal-xxxx
  819-uart-xxxx
  820-usb-xxxx
  821-vfio-xxxx

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>

1 files changed, 105 insertions, 0 deletions

diff --git a/target/linux/layerscape/patches-5.4/701-net-0378-mii-Add-helpers-for-parsing-SGMII-auto-negotiation.patch b/target/linux/layerscape/patches-5.4/701-net-0378-mii-Add-helpers-for-parsing-SGMII-auto-negotiation.patch
new file mode 100644
index 0000000000..3aeda2a057
--- /dev/null
+++ b/target/linux/layerscape/patches-5.4/701-net-0378-mii-Add-helpers-for-parsing-SGMII-auto-negotiation.patch
@@ -0,0 +1,105 @@
+From 4f3ba90c37ec5aedd2227beb013bab59035fbb57 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Mon, 30 Sep 2019 19:20:26 +0300
+Subject: [PATCH] mii: Add helpers for parsing SGMII auto-negotiation
+
+Typically a MAC PCS auto-configures itself after it receives the
+negotiated copper-side link settings from the PHY, but some MAC devices
+are more special and need manual interpretation of the SGMII AN result.
+
+In other cases, the PCS exposes the entire tx_config_reg base page as it
+is transmitted on the wire during auto-negotiation, so it makes sense to
+be able to decode the equivalent lp_advertised bit mask from the raw u16
+(of course, "lp" considering the PCS to be the local PHY).
+
+Therefore, add the bit definitions for the SGMII registers 4 and 5
+(local device ability, link partner ability), as well as a link_mode
+conversion helper that can be used to feed the AN results into
+phy_resolve_aneg_linkmode.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+---
+ include/linux/mii.h      | 50 ++++++++++++++++++++++++++++++++++++++++++++++++
+ include/uapi/linux/mii.h | 12 ++++++++++++
+ 2 files changed, 62 insertions(+)
+
+--- a/include/linux/mii.h
++++ b/include/linux/mii.h
+@@ -373,6 +373,56 @@ static inline u32 mii_lpa_to_ethtool_lpa
+ }
+ 
+ /**
++ * mii_lpa_mod_linkmode_adv_sgmii
++ * @lp_advertising: pointer to destination link mode.
++ * @lpa: value of the MII_LPA register
++ *
++ * A small helper function that translates MII_LPA bits to
++ * linkmode advertisement settings for SGMII.
++ * Leaves other bits unchanged.
++ */
++static inline void
++mii_lpa_mod_linkmode_lpa_sgmii(unsigned long *lp_advertising, u32 lpa)
++{
++	u32 speed_duplex = lpa & LPA_SGMII_DPX_SPD_MASK;
++
++	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, lp_advertising,
++			 speed_duplex == LPA_SGMII_1000HALF);
++
++	linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, lp_advertising,
++			 speed_duplex == LPA_SGMII_1000FULL);
++
++	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, lp_advertising,
++			 speed_duplex == LPA_SGMII_100HALF);
++
++	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, lp_advertising,
++			 speed_duplex == LPA_SGMII_100FULL);
++
++	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, lp_advertising,
++			 speed_duplex == LPA_SGMII_10HALF);
++
++	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, lp_advertising,
++			 speed_duplex == LPA_SGMII_10FULL);
++}
++
++/**
++ * mii_lpa_to_linkmode_adv_sgmii
++ * @advertising: pointer to destination link mode.
++ * @lpa: value of the MII_LPA register
++ *
++ * A small helper function that translates MII_ADVERTISE bits
++ * to linkmode advertisement settings when in SGMII mode.
++ * Clears the old value of advertising.
++ */
++static inline void mii_lpa_to_linkmode_lpa_sgmii(unsigned long *lp_advertising,
++						 u32 lpa)
++{
++	linkmode_zero(lp_advertising);
++
++	mii_lpa_mod_linkmode_lpa_sgmii(lp_advertising, lpa);
++}
++
++/**
+  * mii_adv_mod_linkmode_adv_t
+  * @advertising:pointer to destination link mode.
+  * @adv: value of the MII_ADVERTISE register
+--- a/include/uapi/linux/mii.h
++++ b/include/uapi/linux/mii.h
+@@ -131,6 +131,18 @@
+ #define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
+ #define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
+ 
++/* MAC and PHY tx_config_Reg[15:0] for SGMII in-band auto-negotiation.*/
++#define ADVERTISE_SGMII		0x0001	/* MAC can do SGMII            */
++#define LPA_SGMII		0x0001	/* PHY can do SGMII            */
++#define LPA_SGMII_DPX_SPD_MASK	0x1C00	/* SGMII duplex and speed bits */
++#define LPA_SGMII_10HALF	0x0000	/* Can do 10mbps half-duplex   */
++#define LPA_SGMII_10FULL	0x1000	/* Can do 10mbps full-duplex   */
++#define LPA_SGMII_100HALF	0x0400	/* Can do 100mbps half-duplex  */
++#define LPA_SGMII_100FULL	0x1400	/* Can do 100mbps full-duplex  */
++#define LPA_SGMII_1000HALF	0x0800	/* Can do 1000mbps half-duplex */
++#define LPA_SGMII_1000FULL	0x1800	/* Can do 1000mbps full-duplex */
++#define LPA_SGMII_LINK		0x8000	/* PHY link with copper-side partner */
++
+ /* 1000BASE-T Control register */
+ #define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
+ #define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */