kernel: delete Linux 5.4 config and patches

As the upcoming release will be based on Linux 5.10 only, remove all
kernel configuration as well as patches for Linux 5.4.
There were no targets still actively using Linux 5.4.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606)

1 files changed, 0 insertions, 78 deletions

diff --git a/target/linux/layerscape/patches-5.4/302-dts-0121-arm64-dts-ls1043a-update-USB-nodes-status-to-match-b.patch b/target/linux/layerscape/patches-5.4/302-dts-0121-arm64-dts-ls1043a-update-USB-nodes-status-to-match-b.patch
deleted file mode 100644
index c83fad33ab..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0121-arm64-dts-ls1043a-update-USB-nodes-status-to-match-b.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 2dfd145470894296d70873942ae056340e3fd78d Mon Sep 17 00:00:00 2001
-From: Ran Wang <ran.wang_1@nxp.com>
-Date: Tue, 7 Jul 2020 15:40:31 +0800
-Subject: [PATCH] arm64: dts: ls1043a: update USB nodes status to match board
- config
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ls1043a-rdb and ls1043a-qds board’s default HW config (such as
-pin mux selection) would not enable some USB controllers’
-data path, which causing over-current detected on those
-controllers. This will hit the case of ‘xhci driver prevent bus suspend
-if a root hub port detected over-current condition’, causing system
-failed to be suspended. So disable them in device tree to resolve this
-issue.
-
-Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 4 ++++
- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 8 ++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 3 +++
- 3 files changed, 15 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-@@ -167,6 +167,10 @@
- 	};
- };
- 
-+&usb0 {
-+	status = "okay";
-+};
-+
- #include "fsl-ls1043-post.dtsi"
- 
- &fman0 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
-@@ -212,3 +212,11 @@
- 		};
- 	};
- };
-+
-+&usb0 {
-+	status = "okay";
-+};
-+
-+&usb1 {
-+	status = "okay";
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -707,6 +707,7 @@
- 				snps,host-vbus-glitches;
- 				configure-gfladj;
- 				dma-coherent;
-+				status = "disabled";
- 			};
- 
- 			usb1: usb3@3000000 {
-@@ -722,6 +723,7 @@
- 				snps,host-vbus-glitches;
- 				configure-gfladj;
- 				dma-coherent;
-+				status = "disabled";
- 			};
- 
- 			usb2: usb3@3100000 {
-@@ -737,6 +739,7 @@
- 				snps,host-vbus-glitches;
- 				configure-gfladj;
- 				dma-coherent;
-+				status = "disabled";
- 			};
- 
- 			sata: sata@3200000 {