kernel: delete Linux 5.4 config and patches

As the upcoming release will be based on Linux 5.10 only, remove all
kernel configuration as well as patches for Linux 5.4.
There were no targets still actively using Linux 5.4.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606)

1 files changed, 0 insertions, 156 deletions

diff --git a/target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch b/target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch
deleted file mode 100644
index 6f3181d65a..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From a9f1c1d3e410596d0a39fd92562cc48ef960b1b7 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Fri, 5 Oct 2018 18:33:49 -0500
-Subject: [PATCH] ARM: dts: accumulated change
-
-Signed-off-by: Li Yang <leoyang.li@nxp.com>
----
- arch/arm/boot/dts/ls1021a-qds.dts | 15 +++++++++++++++
- arch/arm/boot/dts/ls1021a-twr.dts | 15 +++++++++++++++
- arch/arm/boot/dts/ls1021a.dtsi    | 29 ++++++++++++++++++++++++-----
- 3 files changed, 54 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/ls1021a-qds.dts
-+++ b/arch/arm/boot/dts/ls1021a-qds.dts
-@@ -126,6 +126,21 @@
- 	};
- };
- 
-+&qspi {
-+	num-cs = <2>;
-+	status = "okay";
-+
-+	qflash0: s25fl128s@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+	};
-+};
-+
- &enet0 {
- 	tbi-handle = <&tbi0>;
- 	phy-handle = <&sgmii_phy1c>;
---- a/arch/arm/boot/dts/ls1021a-twr.dts
-+++ b/arch/arm/boot/dts/ls1021a-twr.dts
-@@ -144,6 +144,21 @@
- 	};
- };
- 
-+&qspi {
-+	num-cs = <2>;
-+	status = "okay";
-+
-+	qflash0: n25q128a13@0 {
-+		compatible = "n25q128a13", "jedec,spi-nor";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+		spi-rx-bus-width = <4>;
-+		spi-tx-bus-width = <4>;
-+	};
-+};
-+
- &enet0 {
- 	tbi-handle = <&tbi0>;
- 	phy-handle = <&sgmii_phy2>;
---- a/arch/arm/boot/dts/ls1021a.dtsi
-+++ b/arch/arm/boot/dts/ls1021a.dtsi
-@@ -167,12 +167,13 @@
- 		ifc: ifc@1530000 {
- 			compatible = "fsl,ifc", "simple-bus";
- 			reg = <0x0 0x1530000 0x0 0x10000>;
-+			big-endian;
- 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- 		};
- 
- 		dcfg: dcfg@1ee0000 {
- 			compatible = "fsl,ls1021a-dcfg", "syscon";
--			reg = <0x0 0x1ee0000 0x0 0x10000>;
-+			reg = <0x0 0x1ee0000 0x0 0x1000>;
- 			big-endian;
- 		};
- 
-@@ -338,7 +339,7 @@
- 		};
- 
- 		i2c0: i2c@2180000 {
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x2180000 0x0 0x10000>;
-@@ -347,11 +348,12 @@
- 			clocks = <&clockgen 4 1>;
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 39>, <&edma0 1 38>;
-+			fsl-scl-gpio = <&gpio3 23 0>;
- 			status = "disabled";
- 		};
- 
- 		i2c1: i2c@2190000 {
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x2190000 0x0 0x10000>;
-@@ -360,6 +362,7 @@
- 			clocks = <&clockgen 4 1>;
- 			dma-names = "tx", "rx";
- 			dmas = <&edma0 1 37>, <&edma0 1 36>;
-+			fsl-scl-gpio = <&gpio3 23 0>;
- 			status = "disabled";
- 		};
- 
-@@ -546,6 +549,16 @@
- 			status = "disabled";
- 		};
- 
-+		ftm0: ftm0@29d0000 {
-+			compatible = "fsl,ftm-alarm";
-+			reg = <0x0 0x29d0000 0x0 0x10000>,
-+			      <0x0 0x1ee2140 0x0 0x4>;
-+			reg-names = "ftm", "FlexTimer1";
-+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-+			big-endian;
-+			status = "okay";
-+		};
-+
- 		pwm1: pwm@29e0000 {
- 			compatible = "fsl,vf610-ftm-pwm";
- 			#pwm-cells = <3>;
-@@ -828,6 +841,8 @@
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- 		};
- 
-@@ -836,7 +851,9 @@
- 			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
- 			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
- 			reg-names = "regs", "config";
--			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-+					   <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
-+			interrupt-names = "pme", "aer";
- 			fsl,pcie-scfg = <&scfg 0>;
- 			#address-cells = <3>;
- 			#size-cells = <2>;
-@@ -860,7 +877,9 @@
- 			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
- 			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
- 			reg-names = "regs", "config";
--			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-+					   <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
-+			interrupt-names = "pme", "aer";
- 			fsl,pcie-scfg = <&scfg 1>;
- 			#address-cells = <3>;
- 			#size-cells = <2>;