kernel: delete Linux 5.4 config and patches

As the upcoming release will be based on Linux 5.10 only, remove all
kernel configuration as well as patches for Linux 5.4.
There were no targets still actively using Linux 5.4.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3a14580411adfb75f9a44eded9f41245b9e44606)

1 files changed, 0 insertions, 574 deletions

diff --git a/target/linux/layerscape/patches-5.4/302-dts-0007-arm64-dts-ls1043a-accumulated-change-for-ls1043a-boa.patch b/target/linux/layerscape/patches-5.4/302-dts-0007-arm64-dts-ls1043a-accumulated-change-for-ls1043a-boa.patch
deleted file mode 100644
index 91f789af13..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0007-arm64-dts-ls1043a-accumulated-change-for-ls1043a-boa.patch
+++ /dev/null
@@ -1,574 +0,0 @@
-From 794b9e55c77bf0ef34dfdb3b151a845c004b3ce3 Mon Sep 17 00:00:00 2001
-From: Li Yang <leoyang.li@nxp.com>
-Date: Thu, 2 May 2019 16:01:01 -0500
-Subject: [PATCH] arm64: dts: ls1043a: accumulated change for ls1043a boards
-
-commit 118e2f48ee8da3f5547c24888bd6fdb78f03b7ce
-Author: Peng Ma <peng.ma@nxp.com>
-Date:   Wed Jul 25 08:53:07 2018 +0000
-
-    dts: fsl-ls1021a, fsl-ls1043a, fsl-ls1046a: add multi block node
-support
-
-    add block-offset to support different virtual block offset for qdma
-    base on soc;
-    the interrupt named "qdma-queueN(N:0,1,2,3)" correspond to a virtual
-    block,N based on block number of qdma;
-
-    Signed-off-by: Peng Ma <peng.ma@nxp.com>
-
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Mon Apr 2 16:22:40 2018 +0800
-
-    arm64: dts: ls1043a: add dts entry for A-010650
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit a47e4bd0b5d076feb6d81601c16d5b79e53a92c8
-Author: Rajesh Bhagat <rajesh.bhagat@freescale.com>
-Date:   Wed Jan 27 11:37:25 2016 +0530
-
-    arm64: dts: ls1043a: Add configure-gfladj property to USB3 node
-
-    Add "configure-gfladj" boolean property to USB3 node. This property
-    is used to determine whether frame length adjustent is required
-    or not
-
-    Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
-    Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-
-commit 38566bbd5ca6747b30d2f0c251bbcfe0723df8c6
-Author: Changming Huang <jerry.huang@nxp.com>
-Date:   Wed Apr 19 12:49:50 2017 +0800
-
-    arm/arm64: dts: Add property snps incr burst type adjustment for
-INCR burst type for dwc3
-
-    Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
-    Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-
-commit 8632d84e0fe187aa023a24f0dad0040c53e12450
-Author: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-Date:   Thu Jan 25 11:31:13 2018 +0530
-
-    arm64: dts: freescale: ls1043a: Modify DT nodes for qspi
-
-    Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
-
-commit b1dc1ebed79e9aaab75fd06837d794ec2f1b624d
-Author: Ran Wang <ran.wang_1@nxp.com>
-Date:   Fri Jan 5 15:14:48 2018 +0800
-
-    arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
-
-    Enable USB3 HW LPM feature for ls1043a and active patch for
-    snps erratum A-010131. It will disable U1/U2 temperary when
-    initiate U3 request.
-
-    Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
-
-commit 9b17a5fcf8da5656ff99ebef3d63ba040e9f676d
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Tue Jun 13 13:14:26 2017 +0800
-
-    arm64: dts: correct the register range of dcfg
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit f60e39fd51ad702e3a2613faaca40871a4763735
-Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-Date:   Tue Aug 22 18:04:02 2017 +0800
-
-    arm64: dts: ls1043a: add pcf85263 rtc nodes
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 67c82e3c7b376139d7cee624589bedbc311f8868
-Author: jiaheng.fan <jiaheng.fan@nxp.com>
-Date:   Thu May 11 17:36:33 2017 +0800
-
-    arm64: dts: ls1021/ls1043/ls1046: add qdma nodes
-    Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
-
-commit c6d9c2498ee83669f9853100301edff9a5905caf
-Author: Wang Dongsheng <dongsheng.wang@nxp.com>
-Date:   Fri Apr 21 13:26:07 2017 +0800
-
-    arm64: dts: ls1043a: add ftm0 nodes
-
-    Add rcpm and ftm0 nodes. The Power Management related features
-    need these nodes.
-
-    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
-
-commit 3bcdc4de0a1c9e6f4a4ddc916e8efe8044d8bbfd
-Author: Po Liu <po.liu@nxp.com>
-Date:   Fri Sep 30 17:11:36 2016 +0800
-
-    arm64: dts: ls1043/ls2080: add pcie aer/pme interrupt-name property
-
-    Some platforms(NXP Layerscape for example) aer/pme interrupts was
-not
-    MSI/MSI-X/INTx but using interrupt line independently. This patch
-    add "aer", "pme" interrupt-names for aer/pme interrupt.
-
-    With the interrupt-names "aer", "pme" code could probe aer/pme
-interrupt
-    line for pcie root port, replace the aer/pme interrupt service irqs.
-
-    This is intend to fixup the Layerscape platforms which aer/pmes
-interrupts
-    was not MSI/MSI-X/INTx, but using interrupt line independently.
-
-    Since the interrupt-names "intr" never been used. Remove it.
-
-    Signed-off-by: Po Liu <po.liu@nxp.com>
-    Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
-
-commit 4d20ecf029f1255520b30c103e1724c618b981c7
-Author: Zhao Qiang <qiang.zhao@nxp.com>
-Date:   Sun Jun 12 15:51:44 2016 +0800
-
-    arm64: dts: ls1043ardb: add ds26522 node
-
-    add ds26522 node to fsl-ls1043a-rdb.dts
-
-    Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
-
-commit ca470562646ab058814fc4a1195016fb3266cdf5
-Author: Zhao Qiang <qiang.zhao@nxp.com>
-Date:   Sun Jun 12 15:44:11 2016 +0800
-
-    arm64: dts: ls1043ardb: add qe node
-
-    Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 162 ++++++++++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts |  36 +++++
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 108 +++++++++++++--
- 3 files changed, 295 insertions(+), 11 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
-@@ -24,6 +24,22 @@
- 		serial1 = &duart1;
- 		serial2 = &duart2;
- 		serial3 = &duart3;
-+		sgmii_riser_s1_p1 = &sgmii_phy_s1_p1;
-+		sgmii_riser_s2_p1 = &sgmii_phy_s2_p1;
-+		sgmii_riser_s3_p1 = &sgmii_phy_s3_p1;
-+		sgmii_riser_s4_p1 = &sgmii_phy_s4_p1;
-+		qsgmii_s1_p1 = &qsgmii_phy_s1_p1;
-+		qsgmii_s1_p2 = &qsgmii_phy_s1_p2;
-+		qsgmii_s1_p3 = &qsgmii_phy_s1_p3;
-+		qsgmii_s1_p4 = &qsgmii_phy_s1_p4;
-+		qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
-+		qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
-+		qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
-+		qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
-+		emi1_slot1 = &ls1043mdio_s1;
-+		emi1_slot2 = &ls1043mdio_s2;
-+		emi1_slot3 = &ls1043mdio_s3;
-+		emi1_slot4 = &ls1043mdio_s4;
- 	};
- 
- 	chosen {
-@@ -64,6 +80,8 @@
- 	fpga: board-control@2,0 {
- 		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
- 		reg = <0x2 0x0 0x0000100>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
- 	};
- };
- 
-@@ -149,3 +167,147 @@
- };
- 
- #include "fsl-ls1043-post.dtsi"
-+
-+&fman0 {
-+	ethernet@e0000 {
-+		phy-handle = <&qsgmii_phy_s2_p1>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@e2000 {
-+		phy-handle = <&qsgmii_phy_s2_p2>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@e4000 {
-+		phy-handle = <&rgmii_phy1>;
-+		phy-connection-type = "rgmii";
-+	};
-+
-+	ethernet@e6000 {
-+		phy-handle = <&rgmii_phy2>;
-+		phy-connection-type = "rgmii";
-+	};
-+
-+	ethernet@e8000 {
-+		phy-handle = <&qsgmii_phy_s2_p3>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@ea000 {
-+		phy-handle = <&qsgmii_phy_s2_p4>;
-+		phy-connection-type = "sgmii";
-+	};
-+
-+	ethernet@f0000 { /* DTSEC9/10GEC1 */
-+		fixed-link = <1 1 10000 0 0>;
-+		phy-connection-type = "xgmii";
-+	};
-+};
-+
-+&fpga {
-+	mdio-mux-emi1 {
-+		compatible = "mdio-mux-mmioreg", "mdio-mux";
-+		mdio-parent-bus = <&mdio0>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x54 1>;    /* BRDCFG4 */
-+		mux-mask = <0xe0>; /* EMI1 */
-+
-+		/* On-board RGMII1 PHY */
-+		ls1043mdio0: mdio@0 {
-+			reg = <0>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
-+				reg = <0x1>;
-+			};
-+		};
-+
-+		/* On-board RGMII2 PHY */
-+		ls1043mdio1: mdio@1 {
-+			reg = <0x20>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
-+				reg = <0x2>;
-+			};
-+		};
-+
-+		/* Slot 1 */
-+		ls1043mdio_s1: mdio@2 {
-+			reg = <0x40>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			qsgmii_phy_s1_p1: ethernet-phy@4 {
-+				reg = <0x4>;
-+			};
-+			qsgmii_phy_s1_p2: ethernet-phy@5 {
-+				reg = <0x5>;
-+			};
-+			qsgmii_phy_s1_p3: ethernet-phy@6 {
-+				reg = <0x6>;
-+			};
-+			qsgmii_phy_s1_p4: ethernet-phy@7 {
-+				reg = <0x7>;
-+			};
-+
-+			sgmii_phy_s1_p1: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+		};
-+
-+		/* Slot 2 */
-+		ls1043mdio_s2: mdio@3 {
-+			reg = <0x60>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			qsgmii_phy_s2_p1: ethernet-phy@8 {
-+				reg = <0x8>;
-+			};
-+			qsgmii_phy_s2_p2: ethernet-phy@9 {
-+				reg = <0x9>;
-+			};
-+			qsgmii_phy_s2_p3: ethernet-phy@a {
-+				reg = <0xa>;
-+			};
-+			qsgmii_phy_s2_p4: ethernet-phy@b {
-+				reg = <0xb>;
-+			};
-+
-+			sgmii_phy_s2_p1: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+		};
-+
-+		/* Slot 3 */
-+		ls1043mdio_s3: mdio@4 {
-+			reg = <0x80>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			sgmii_phy_s3_p1: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+		};
-+
-+		/* Slot 4 */
-+		ls1043mdio_s4: mdio@5 {
-+			reg = <0xa0>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			sgmii_phy_s4_p1: ethernet-phy@1c {
-+				reg = <0x1c>;
-+			};
-+		};
-+	};
-+};
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
-@@ -49,6 +49,10 @@
- 		compatible = "pericom,pt7c4338";
- 		reg = <0x68>;
- 	};
-+	rtc@51 {
-+		compatible = "nxp,pcf85263";
-+		reg = <0x51>;
-+	};
- };
- 
- &ifc {
-@@ -94,6 +98,38 @@
- 		reg = <0>;
- 		spi-max-frequency = <1000000>; /* input clock */
- 	};
-+
-+	slic@2 {
-+		compatible = "maxim,ds26522";
-+		reg = <2>;
-+		spi-max-frequency = <2000000>;
-+		fsl,spi-cs-sck-delay = <100>;
-+		fsl,spi-sck-cs-delay = <50>;
-+	};
-+
-+	slic@3 {
-+		compatible = "maxim,ds26522";
-+		reg = <3>;
-+		spi-max-frequency = <2000000>;
-+		fsl,spi-cs-sck-delay = <100>;
-+		fsl,spi-sck-cs-delay = <50>;
-+	};
-+};
-+
-+&uqe {
-+	ucc_hdlc: ucc@2000 {
-+		compatible = "fsl,ucc-hdlc";
-+		rx-clock-name = "clk8";
-+		tx-clock-name = "clk9";
-+		fsl,rx-sync-clock = "rsync_pin";
-+		fsl,tx-sync-clock = "tsync_pin";
-+		fsl,tx-timeslot-mask = <0xfffffffe>;
-+		fsl,rx-timeslot-mask = <0xfffffffe>;
-+		fsl,tdm-framer-type = "e1";
-+		fsl,tdm-id = <0>;
-+		fsl,siram-entry-id = <0>;
-+		fsl,tdm-interface;
-+	};
- };
- 
- &duart0 {
---- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -278,7 +278,7 @@
- 
- 		dcfg: dcfg@1ee0000 {
- 			compatible = "fsl,ls1043a-dcfg", "syscon";
--			reg = <0x0 0x1ee0000 0x0 0x10000>;
-+			reg = <0x0 0x1ee0000 0x0 0x1000>;
- 			big-endian;
- 		};
- 
-@@ -412,7 +412,7 @@
- 		};
- 
- 		i2c0: i2c@2180000 {
--			compatible = "fsl,vf610-i2c";
-+			compatible = "fsl,vf610-i2c", "fsl,ls1043a-vf610-i2c";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x2180000 0x0 0x10000>;
-@@ -422,6 +422,7 @@
- 			dmas = <&edma0 1 39>,
- 			       <&edma0 1 38>;
- 			dma-names = "tx", "rx";
-+			scl-gpios = <&gpio4 12 0>;
- 			status = "disabled";
- 		};
- 
-@@ -526,6 +527,72 @@
- 			#interrupt-cells = <2>;
- 		};
- 
-+		uqe: uqe@2400000 {
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			device_type = "qe";
-+			compatible = "fsl,qe", "simple-bus";
-+			ranges = <0x0 0x0 0x2400000 0x40000>;
-+			reg = <0x0 0x2400000 0x0 0x480>;
-+			brg-frequency = <100000000>;
-+			bus-frequency = <200000000>;
-+
-+			fsl,qe-num-riscs = <1>;
-+			fsl,qe-num-snums = <28>;
-+
-+			qeic: qeic@80 {
-+				compatible = "fsl,qe-ic";
-+				reg = <0x80 0x80>;
-+				#address-cells = <0>;
-+				interrupt-controller;
-+				#interrupt-cells = <1>;
-+				interrupts = <0 77 0x04 0 77 0x04>;
-+			};
-+
-+			si1: si@700 {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+				compatible = "fsl,ls1043-qe-si",
-+						"fsl,t1040-qe-si";
-+				reg = <0x700 0x80>;
-+			};
-+
-+			siram1: siram@1000 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "fsl,ls1043-qe-siram",
-+						"fsl,t1040-qe-siram";
-+				reg = <0x1000 0x800>;
-+			};
-+
-+			ucc@2000 {
-+				cell-index = <1>;
-+				reg = <0x2000 0x200>;
-+				interrupts = <32>;
-+				interrupt-parent = <&qeic>;
-+			};
-+
-+			ucc@2200 {
-+				cell-index = <3>;
-+				reg = <0x2200 0x200>;
-+				interrupts = <34>;
-+				interrupt-parent = <&qeic>;
-+			};
-+
-+			muram@10000 {
-+				#address-cells = <1>;
-+				#size-cells = <1>;
-+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
-+				ranges = <0x0 0x10000 0x6000>;
-+
-+				data-only@0 {
-+					compatible = "fsl,qe-muram-data",
-+					"fsl,cpm-muram-data";
-+					reg = <0x0 0x6000>;
-+				};
-+			};
-+		};
-+
- 		lpuart0: serial@2950000 {
- 			compatible = "fsl,ls1021a-lpuart";
- 			reg = <0x0 0x2950000 0x0 0x1000>;
-@@ -580,6 +647,16 @@
- 			status = "disabled";
- 		};
- 
-+		ftm0: ftm0@29d0000 {
-+			compatible = "fsl,ftm-alarm";
-+			reg = <0x0 0x29d0000 0x0 0x10000>,
-+			      <0x0 0x1ee2140 0x0 0x4>;
-+			reg-names = "ftm", "FlexTimer1";
-+			interrupts = <0 86 0x4>;
-+			big-endian;
-+			status = "okay";
-+		};
-+
- 		wdog0: wdog@2ad0000 {
- 			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
- 			reg = <0x0 0x2ad0000 0x0 0x10000>;
-@@ -612,7 +689,10 @@
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			configure-gfladj;
- 		};
- 
- 		usb1: usb3@3000000 {
-@@ -622,7 +702,10 @@
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			configure-gfladj;
- 		};
- 
- 		usb2: usb3@3100000 {
-@@ -632,7 +715,10 @@
- 			dr_mode = "host";
- 			snps,quirk-frame-length-adjustment = <0x20>;
- 			snps,dis_rxdet_inp3_quirk;
-+			usb3-lpm-capable;
-+			snps,dis-u1u2-when-u3-quirk;
- 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-+			configure-gfladj;
- 		};
- 
- 		sata: sata@3200000 {
-@@ -671,9 +757,9 @@
- 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
- 			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
- 			reg-names = "regs", "config";
--			interrupts = <0 118 0x4>, /* controller interrupt */
--				     <0 117 0x4>; /* PME interrupt */
--			interrupt-names = "intr", "pme";
-+			interrupts = <0 117 0x4>, /* PME interrupt */
-+				     <0 118 0x4>; /* aer interrupt */
-+			interrupt-names = "pme", "aer";
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
-@@ -697,9 +783,9 @@
- 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
- 			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
- 			reg-names = "regs", "config";
--			interrupts = <0 128 0x4>,
--				     <0 127 0x4>;
--			interrupt-names = "intr", "pme";
-+			interrupts = <0 127 0x4>,
-+				     <0 128 0x4>;
-+			interrupt-names = "pme", "aer";
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";
-@@ -723,9 +809,9 @@
- 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
- 			       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
- 			reg-names = "regs", "config";
--			interrupts = <0 162 0x4>,
--				     <0 161 0x4>;
--			interrupt-names = "intr", "pme";
-+			interrupts = <0 161 0x4>,
-+				     <0 162 0x4>;
-+			interrupt-names = "pme", "aer";
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 			device_type = "pci";