aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/layerscape/image/Makefile
diff options
context:
space:
mode:
authorYutang Jiang <yutang.jiang@nxp.com>2016-10-29 00:18:23 +0800
committerJohn Crispin <john@phrozen.org>2016-10-31 17:00:10 +0100
commit15a14cf1665ef3d8b5c77cce69b52d131340e3b3 (patch)
treebd544b24bd3e7fc7efc61f80e1755274971c5582 /target/linux/layerscape/image/Makefile
parentc6c731fe311f7da42777ffd31804a4f6aa3f8e19 (diff)
downloadupstream-15a14cf1665ef3d8b5c77cce69b52d131340e3b3.tar.gz
upstream-15a14cf1665ef3d8b5c77cce69b52d131340e3b3.tar.bz2
upstream-15a14cf1665ef3d8b5c77cce69b52d131340e3b3.zip
layerscape: add 64b/32b target for ls1012ardb device
The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
Diffstat (limited to 'target/linux/layerscape/image/Makefile')
-rw-r--r--target/linux/layerscape/image/Makefile24
1 files changed, 24 insertions, 0 deletions
diff --git a/target/linux/layerscape/image/Makefile b/target/linux/layerscape/image/Makefile
index 9153f00d05..7d80398d76 100644
--- a/target/linux/layerscape/image/Makefile
+++ b/target/linux/layerscape/image/Makefile
@@ -25,6 +25,11 @@ define Build/append-ls-dtb
dd if=$(DTS_DIR)/$(1).dtb >> $@
endef
+define Build/append-ls-rootfs-ext4
+ $(STAGING_DIR_HOST)/bin/make_ext4fs -l $(word 2,$(1)) -b 4096 -i 6000 -m 0 -J $(KDIR)/$(word 1,$(1))-$(word 2,$(1)).root.ext4 $(TARGET_DIR)
+ dd if=$(KDIR)/$(word 1,$(1))-$(word 2,$(1)).root.ext4 >> $@
+endef
+
define Device/Default
PROFILES = Default
FILESYSTEMS := squashfs
@@ -57,4 +62,23 @@ endif
endef
TARGET_DEVICES += ls1043ardb
+define Device/ls1012ardb
+ DEVICE_TITLE := ls1012ardb-$(SUBTARGET)
+ DEVICE_PACKAGES += rcw-layerscape-ls1012ardb uboot-layerscape-$(SUBTARGET)-ls1012ardb kmod-ppfe ppfe-ls1012ardb
+ifeq ($(SUBTARGET),64b)
+ DEVICE_DTS = freescale/fsl-ls1012a-rdb
+endif
+ifeq ($(SUBTARGET),32b)
+ DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls1012a-rdb
+endif
+ IMAGE/firmware.bin = append-ls-rcw $(1) | pad-to 1M | append-ls-uboot $(1) | pad-to 3M | \
+ append-ls-dtb $$(DEVICE_DTS) | pad-to 4M | append-kernel | pad-to 9M | \
+ append-rootfs | pad-to 32M | check-size 33554433
+ IMAGES += firmware.ext4.bin
+ IMAGE/firmware.ext4.bin = append-ls-rcw $(1) | pad-to 1M | append-ls-uboot $(1) | pad-to 3M | \
+ append-ls-dtb $$(DEVICE_DTS) | pad-to 4M | append-kernel | pad-to 9M | \
+ append-ls-rootfs-ext4 $(1) 23M | check-size 33554433
+endef
+TARGET_DEVICES += ls1012ardb
+
$(eval $(call BuildImage))