diff options
author | Mathew McBride <matt@traverse.com.au> | 2023-06-06 06:24:11 +0000 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-07-26 13:36:58 +0200 |
commit | 68a4c60b5cb3ec48d74a40fb403417ef1606893d (patch) | |
tree | 4beb70382bd85d54cf0f1b3655a18fc38cfed32c /target/linux/layerscape/base-files/etc/board.d/01_led | |
parent | e54e5bc415ceea61391a22cf0bfe88181690ce3e (diff) | |
download | upstream-68a4c60b5cb3ec48d74a40fb403417ef1606893d.tar.gz upstream-68a4c60b5cb3ec48d74a40fb403417ef1606893d.tar.bz2 upstream-68a4c60b5cb3ec48d74a40fb403417ef1606893d.zip |
layerscape: armv8_64b: add Traverse Ten64 NAND variant
The Ten64 board[1] is based around NXP's Layerscape LS1088A SoC.
It is capable of booting both standard Linux distributions
from disk devices, using EFI, and booting OpenWrt
from NAND.
See the online manual for more information, including the
flash layout[2].
This patchset adds support for generating Ten64 images
for NAND boot.
For disk boot, one can use the EFI support that was
recently added to the armvirt target.
We previously supported NAND users by building
inside our armvirt/EFI target[3], but this approach
is not suitable for OpenWrt upstream. Users who
used our supplied NAND images will be able to upgrade
to this via sysupgrade.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
[1] - https://www.traverse.com.au/hardware/ten64
[2] - https://ten64doc.traverse.com.au/hardware/flash/
[3] - Example:
https://gitlab.com/traversetech/ls1088firmware/openwrt/-/commit/285e4360e1604eb466880d245d48efd9962143a5
(cherry picked from commit af0546da3440dba24217949527e503820350ff05)
Diffstat (limited to 'target/linux/layerscape/base-files/etc/board.d/01_led')
-rw-r--r-- | target/linux/layerscape/base-files/etc/board.d/01_led | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/layerscape/base-files/etc/board.d/01_led b/target/linux/layerscape/base-files/etc/board.d/01_led index 7fddfa0824..a21c21980a 100644 --- a/target/linux/layerscape/base-files/etc/board.d/01_led +++ b/target/linux/layerscape/base-files/etc/board.d/01_led @@ -17,6 +17,10 @@ traverse,ls1043s) ucidef_set_led_netdev "xgact" "10G Activity" "ls1043s:yellow:10gact" "eth6" ucidef_set_led_netdev "xglink" "10G Link" "ls1043s:green:10glink" "eth6" ;; +traverse,ten64) + ucidef_set_led_netdev "sfp1" "SFP 1" "ten64:green:sfp1:down" "eth8" "link tx rx" + ucidef_set_led_netdev "sfp2" "SFP 2" "ten64:green:sfp2:up" "eth9" "link tx rx" + ;; esac board_config_flush |