diff options
| author | Alexey Kosmakov <a.kosmakov@nagtech.ru> | 2022-05-30 13:46:34 +0500 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-10-02 20:21:55 +0200 |
| commit | a664d39c5bb4a77ffc90a6fdfdca3606292b650d (patch) | |
| tree | aa737736e7c71bd911b9384f7366b1474ec3c47a /target/linux/lantiq | |
| parent | bf5b1a53d4ff3f1d742f9ece1ab16555280417ec (diff) | |
| download | upstream-a664d39c5bb4a77ffc90a6fdfdca3606292b650d.tar.gz upstream-a664d39c5bb4a77ffc90a6fdfdca3606292b650d.tar.bz2 upstream-a664d39c5bb4a77ffc90a6fdfdca3606292b650d.zip | |
ramips: add support for SNR SNR-CPE-ME2-Lite
SNR SNR-CPE-ME2-Lite is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB
- Flash : SPI-NOR 16 MiB
- WLAN : 2.4 GHz 2T2R (MediaTek MT7603E)
5 GHz 2T2R (MediaTek MT7613BE)
- Ethernet : 10/100/1000 Mbps x5
- Switch : MediaTek MT7530 (SoC)
- UART : through-hole on PCB
- J4: 3.3V, GND, TX, RX
- 57600n8
- Power : 12 VDC, 1.5 A
Flash instruction via WEB (firmware 1.10.4 and later)
1. Boot SNR-CPE-ME2-Lite normally with "Router" mode
2. Access to "http://192.168.1.1/" and open "Administration -> Management" page
3. Select the OpenWrt factory image in "Firmware update" section and click "Update" button
4. Wait ~120 seconds to complete flashing
Flash instruction via TFTP (all version):
1. Boot SNR-CPE-ME2-Lite to recovery mode (hold the reset button while power on)
2. Send firmware via TFTP client:
TFTP Server address: 192.168.1.1
TFTP Client address: 192.168.1.131
3. Wait ~120 seconds to complete flashing
Signed-off-by: Alexey Kosmakov <a.kosmakov@nagtech.ru>
Diffstat (limited to 'target/linux/lantiq')
0 files changed, 0 insertions, 0 deletions