diff options
author | Wenli Looi <wlooi@ucalgary.ca> | 2022-07-02 20:18:59 +0000 |
---|---|---|
committer | Christian Marangi <ansuelsmth@gmail.com> | 2022-07-21 16:58:18 +0200 |
commit | c240fed242966995e7717487c66fe96457f7d721 (patch) | |
tree | 76baca0fed684c208fe399513268e2ea21cfac7d /target/linux/lantiq | |
parent | d5858c6d97366f545e4efc50c2656b0cd3ac2928 (diff) | |
download | upstream-c240fed242966995e7717487c66fe96457f7d721.tar.gz upstream-c240fed242966995e7717487c66fe96457f7d721.tar.bz2 upstream-c240fed242966995e7717487c66fe96457f7d721.zip |
ramips: add support for Netgear WAX202
Netgear WAX202 is an 802.11ax (Wi-Fi 6) router.
Specifications:
* SoC: MT7621A
* RAM: 512 MiB NT5CC256M16ER-EK
* Flash: NAND 128 MiB F59L1G81MB-25T
* Wi-Fi:
* MT7915D: 2.4/5 GHz (DBDC)
* Ethernet: 4x 1GbE
* Switch: SoC built-in
* USB: None
* UART: 115200 baud (labeled on board)
Load addresses (same as ipTIME AX2004M):
* stock
* 0x80010000: FIT image
* 0x81001000: kernel image -> entry
* OpenWrt
* 0x80010000: FIT image
* 0x82000000: uncompressed kernel+relocate image
* 0x80001000: relocated kernel image -> entry
Installation:
* Flash the factory image through the stock web interface, or TFTP to
the bootloader. NMRP can be used to TFTP without opening the case.
* Note that the bootloader accepts both encrypted and unencrypted
images, while the stock web interface only accepts encrypted ones.
Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.
References in WAX202 GPL source:
https://www.downloads.netgear.com/files/GPL/WAX202_V1.0.5.1_Source.rar
* openwrt/target/linux/ramips/dts/mt7621-ax-nand-wax202.dts
DTS file for this device.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
(cherry picked from commit 0f068e7c4a83bcbf20c4e52a5f8a3f1fe2af2246)
Diffstat (limited to 'target/linux/lantiq')
0 files changed, 0 insertions, 0 deletions