diff options
| author | David Bauer <mail@david-bauer.net> | 2022-01-15 11:15:15 +0100 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2022-01-15 11:27:53 +0100 |
| commit | 7f7705923a8299323057e78ccae4473b5bb05807 (patch) | |
| tree | de8893b3bcb88a0e4899addefed273ede4455239 /target/linux/lantiq | |
| parent | 9e15dea36e977cfe9c31a08e32143c3280272fdc (diff) | |
| download | upstream-7f7705923a8299323057e78ccae4473b5bb05807.tar.gz upstream-7f7705923a8299323057e78ccae4473b5bb05807.tar.bz2 upstream-7f7705923a8299323057e78ccae4473b5bb05807.zip | |
lantiq: add additional caldata offsets
It was reported the AVM FritzBox 7430 has different offsets for the
caldata depending on the device.
Whether this is due to custom bad-block handling or up to the installed
bootloader-version is unknown.
Try both known caldata offsets like it is already done for the ipq40xx
NAND based models. Use the same approach for the FritzBox 7412. While it
is currently unknown, whether it is affected, applying the same logic
has no downsides.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/lantiq')
| -rw-r--r-- | target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom | 5 |
1 files changed, 2 insertions, 3 deletions
diff --git a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index 07463a8061..e4683af960 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -23,10 +23,9 @@ case "$FIRMWARE" in avm,fritz7360-v2) caldata_extract "urlader" 0x985 0x1000 ;; - avm,fritz7412) - /usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") - ;; + avm,fritz7412|\ avm,fritz7430) + /usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") || \ /usr/bin/fritz_cal_extract -i 1 -s 0x1e800 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") ;; bt,homehub-v5a) |