aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
diff options
context:
space:
mode:
authorBen Greear <greearb@candelatech.com>2016-10-17 14:23:01 -0700
committerFelix Fietkau <nbd@nbd.name>2016-10-19 11:13:15 +0200
commit1ffb7e47be92e32a08d866399af83d4136e28e06 (patch)
tree31cc24329a05064913da7a9b0c2dce6e63a6fb23 /target/linux/lantiq
parent536420647a124f7330cfed323c36fa17c0824550 (diff)
downloadupstream-1ffb7e47be92e32a08d866399af83d4136e28e06.tar.gz
upstream-1ffb7e47be92e32a08d866399af83d4136e28e06.tar.bz2
upstream-1ffb7e47be92e32a08d866399af83d4136e28e06.zip
Latest ath10k CT 988X firmware (beta-18).
* Backport much of the 10.2 firmware features from upstream QCA driver. This includes ANI support, adaptive CCA, tx-hang workarounds, and lots of other things. Not all of this may be enabled at this point, and more code waits to be backported as time and motivation allows. * Fix some rate-control issues where ath10k in station mode (at least), would sometimes get stuck at low rates. This appeared to be a probe related state machine issue in the firmware, so I added some timeout logic to kick the state machine if it gets stuck. This signicantly improves throughput tests with many stations. * Support configuring WMI WD timeout using SET_SPECIAL API. * Properly configure the rx-mask on bootup to work around problem found by Mr. Kazior. This should remove the need to add the driver hack he posted. * Allow configuring pdev failed-retry threshold. This is how many consecutive tx failures the firmware will allow before resetting the wifi chip (not a full firmware crash). Signed-off-by: Ben Greear <greearb@candelatech.com>
Diffstat (limited to 'target/linux/lantiq')
0 files changed, 0 insertions, 0 deletions