lantiq: add support for kernel 4.9

The following patches were dropped because they are already applied
upstream:
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch
0047-mtd-plat-nand-pass-of-node.patch
0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch

The PHY driver was reduced to the code adding the LED configuration,
the rest is already upstream:
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

The SPI driver was replaced with the version pending for upstream
inclusion:
New driver:
0090-spi-add-transfer_status-callback.patch
0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
Old driver:
0100-spi-add-support-for-Lantiq-SPI-controller.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 42 insertions, 0 deletions

diff --git a/target/linux/lantiq/patches-4.9/0090-spi-add-transfer_status-callback.patch b/target/linux/lantiq/patches-4.9/0090-spi-add-transfer_status-callback.patch
new file mode 100644
index 0000000000..de50e228b2
--- /dev/null
+++ b/target/linux/lantiq/patches-4.9/0090-spi-add-transfer_status-callback.patch
@@ -0,0 +1,42 @@
+--- a/drivers/spi/spi.c
++++ b/drivers/spi/spi.c
+@@ -1013,6 +1013,20 @@ static int spi_transfer_one_message(stru
+ 								 msecs_to_jiffies(ms));
+ 			}
+ 
++			if (master->transfer_status) {
++				ret = master->transfer_status(master, ms);
++				if (ret) {
++					SPI_STATISTICS_INCREMENT_FIELD(statm,
++								       errors);
++					SPI_STATISTICS_INCREMENT_FIELD(stats,
++								       errors);
++					dev_err(&msg->spi->dev,
++						"SPI transfer status: %d\n",
++						ret);
++					goto out;
++				}
++			}
++
+ 			if (ms == 0) {
+ 				SPI_STATISTICS_INCREMENT_FIELD(statm,
+ 							       timedout);
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -370,6 +370,8 @@ static inline void spi_unregister_driver
+  *                    transfer_one_message are mutually exclusive; when both
+  *                    are set, the generic subsystem does not call your
+  *                    transfer_one callback.
++ * @transfer_status: This callback allows the driver to return an error code
++ *		     in case the scheduled single spi transfer failed.
+  * @handle_err: the subsystem calls the driver to handle an error that occurs
+  *		in the generic implementation of transfer_one_message().
+  * @unprepare_message: undo any work done by prepare_message().
+@@ -546,6 +548,7 @@ struct spi_master {
+ 	void (*set_cs)(struct spi_device *spi, bool enable);
+ 	int (*transfer_one)(struct spi_master *master, struct spi_device *spi,
+ 			    struct spi_transfer *transfer);
++	int (*transfer_status)(struct spi_master *master, unsigned long timeout);
+ 	void (*handle_err)(struct spi_master *master,
+ 			   struct spi_message *message);
+