diff options
| author | Thomas Nixon <tom@tomn.co.uk> | 2017-04-23 22:07:17 +0100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-07-07 07:13:24 +0200 |
| commit | 50e3659703113df036e755e0d483172c3b809242 (patch) | |
| tree | 195123601acacf16941fd02d3186980a54cec4c5 /target/linux/lantiq/image | |
| parent | 08cd5b769deb4833b7a20208fa15674f52023fea (diff) | |
| download | upstream-50e3659703113df036e755e0d483172c3b809242.tar.gz upstream-50e3659703113df036e755e0d483172c3b809242.tar.bz2 upstream-50e3659703113df036e755e0d483172c3b809242.zip | |
lantiq: add Netgear DM200 support
Netgear DM200 is an inexpensive VDSL modem:
CPU: VRX220 MIPS 34Kc 5.6 @ 500Mhz
RAM: 64MiB
Flash: 8MiB
Ethernet: 1x100M
DSL: VDSL2+, ADSL2+
reset button, 3x bi-color LEDs
Serial port is 115200 baud, on the 4 pin header; pins from the bottom to
top are GND, RX, TX.
To upgrade from the vendor firmware, upload factory.img
The DM200 bootloader supports flashing over TFTP; hold the reset button
while powering on the device, and wait for the power light to start
flashing green before releasing. The device is now listening on
192.168.0.1/24, and can be sent a factory.img or a netgear image with a
TFTP put.
Once the image is loaded, it will be written to the flash, and the
device will reboot; this will take a few minutes.
Thanks to Edward O'Callaghan and Baptiste Jonglez, who implemented their
own ports for this device and provided valuable feedback.
Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
Diffstat (limited to 'target/linux/lantiq/image')
| -rw-r--r-- | target/linux/lantiq/image/Makefile | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index 122a8a5898..1678b1bf55 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -513,6 +513,17 @@ define Device/BTHOMEHUBV5A endef TARGET_DEVICES += BTHOMEHUBV5A +define Device/DM200 + IMAGES := sysupgrade.bin factory.img + IMAGE/factory.img := $$(IMAGE/sysupgrade.bin) | netgear-dni + IMAGE_SIZE := 7872k + DEVICE_TITLE := Netgear DM200 + NETGEAR_BOARD_ID := DM200 + NETGEAR_HW_ID := 29765233+8+0+64+0+0 +endef +DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID +TARGET_DEVICES += DM200 + define Device/EASY80920NAND $(Device/lantiqFullImage) IMAGE_SIZE := 64512k |