aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/files
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2012-11-02 20:07:02 +0000
committerJohn Crispin <john@openwrt.org>2012-11-02 20:07:02 +0000
commit736835343c20f3ca495b73d2adf24d240f471676 (patch)
treebbf0787170ac715eaa9f8eabf8317cfe56fc17b3 /target/linux/lantiq/files
parentfa316620a7bd49e4d08bf1a410da98db54a83327 (diff)
downloadupstream-736835343c20f3ca495b73d2adf24d240f471676.tar.gz
upstream-736835343c20f3ca495b73d2adf24d240f471676.tar.bz2
upstream-736835343c20f3ca495b73d2adf24d240f471676.zip
move files/ -> files-3.3/
SVN-Revision: 34060
Diffstat (limited to 'target/linux/lantiq/files')
-rw-r--r--target/linux/lantiq/files/arch/mips/configs/ase_defconfig67
-rw-r--r--target/linux/lantiq/files/arch/mips/configs/falcon_defconfig72
-rw-r--r--target/linux/lantiq/files/arch/mips/configs/xway_defconfig66
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/clkdev.h25
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h26
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h21
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h268
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/irq.h18
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h152
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/lantiq_timer.h155
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/base_reg.h56
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/boot_reg.h37
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/dma_reg.h308
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ebu_reg.h615
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/es_reg.h2098
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/irq.h36
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/lantiq_soc.h71
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/mps_reg.h242
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/port_reg.h3262
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ssc_reg.h624
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/status_reg.h130
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_dma.h245
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_irq.h35
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_mux.h467
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_pms.h23
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys0_reg.h165
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys1_reg.h370
-rw-r--r--target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys2_reg.h494
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-buttons.c58
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-leds.c57
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/Kconfig11
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/Makefile2
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/addon-easy98000.c213
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c161
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h20
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.c152
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.h25
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/gpio.c409
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-95C3AM1.c94
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98000.c138
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98020.c118
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/prom.c84
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/reset.c87
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/falcon/sysctrl.c211
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/Kconfig16
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/Makefile3
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/clk-svip.c100
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/devices.c380
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/devices.h23
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/dma.c1206
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/gpio.c553
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy33016.c73
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy336.c221
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/mux.c187
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/pms.c101
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/prom.c73
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/reset.c95
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/svip/switchip_setup.c666
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/clk.c329
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.c70
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.h17
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.c45
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.h17
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.c53
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.h16
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.c32
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.h14
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/gptu.c176
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/mach-arv.c793
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/mach-bthomehubv2b.c542
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_ar9.c115
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_vr9.c164
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.c168
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.h210
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/mach-h201l.c100
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/mach-netgear.c239
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/mach-p2601hnfx.c113
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/mach-wbmr.c120
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/nand.c216
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.c109
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.h6
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/prom.c110
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/sysctrl.c283
-rw-r--r--target/linux/lantiq/files/arch/mips/lantiq/xway/timer.c846
-rw-r--r--target/linux/lantiq/files/arch/mips/pci/fixup-lantiq-pcie.c81
-rw-r--r--target/linux/lantiq/files/arch/mips/pci/fixup-lantiq.c42
-rw-r--r--target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-msi.c399
-rw-r--r--target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-phy.c408
-rw-r--r--target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.c1146
-rw-r--r--target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.h1305
-rw-r--r--target/linux/lantiq/files/drivers/i2c/busses/i2c-falcon.c1040
-rw-r--r--target/linux/lantiq/files/drivers/net/ethernet/lantiq_vrx200.c1358
-rw-r--r--target/linux/lantiq/files/drivers/net/ethernet/svip_eth.c636
-rw-r--r--target/linux/lantiq/files/drivers/net/ethernet/svip_virtual_eth.c346
-rw-r--r--target/linux/lantiq/files/drivers/spi/spi-falcon.c483
-rw-r--r--target/linux/lantiq/files/drivers/spi/spi-xway.c1070
-rw-r--r--target/linux/lantiq/files/drivers/spi/spi_svip.c955
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/Kconfig37
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/Makefile39
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_attr.c802
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_attr.h67
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil.c3025
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil.h911
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h58
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_intr.c708
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_driver.c1277
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_driver.h84
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.c2870
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.h676
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c1839
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c794
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_ifx.c103
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_ifx.h85
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_plat.h269
-rw-r--r--target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_regs.h1797
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/Kconfig58
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/Makefile85
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/TagHistory171
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd.c2523
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd.h628
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_es.c549
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_intr.c3742
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_queue.c418
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif.c1458
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif.h665
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif_d.c458
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif_h.c846
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_ctl.c1385
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_driver.c970
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_plat.h1018
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_regs.h1420
-rw-r--r--target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_version.h5
-rw-r--r--target/linux/lantiq/files/include/linux/svip_nat.h37
-rw-r--r--target/linux/lantiq/files/include/linux/svip_nat_io.h103
-rw-r--r--target/linux/lantiq/files/net/ipv4/svip_nat.c1569
135 files changed, 0 insertions, 63406 deletions
diff --git a/target/linux/lantiq/files/arch/mips/configs/ase_defconfig b/target/linux/lantiq/files/arch/mips/configs/ase_defconfig
deleted file mode 100644
index 5bb1d93ebd..0000000000
--- a/target/linux/lantiq/files/arch/mips/configs/ase_defconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_LANTIQ=y
-CONFIG_SOC_AMAZON_SE=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_DEFAULT_HOSTNAME="amazon_se"
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt"
-CONFIG_INITRAMFS_ROOT_UID=1000
-CONFIG_INITRAMFS_ROOT_GID=1000
-+# CONFIG_RD_GZIP is not set
-CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-CONFIG_NETFILTER=y
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=y
-CONFIG_NET_SCHED=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_LANTIQ=y
-CONFIG_MISC_DEVICES=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_LANTIQ_ETOP=y
-CONFIG_PHYLIB=y
-CONFIG_SERIAL_LANTIQ=y
-CONFIG_PINCTRL=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_WATCHDOG=y
-CONFIG_LANTIQ_WDT=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
diff --git a/target/linux/lantiq/files/arch/mips/configs/falcon_defconfig b/target/linux/lantiq/files/arch/mips/configs/falcon_defconfig
deleted file mode 100644
index ce242a88ed..0000000000
--- a/target/linux/lantiq/files/arch/mips/configs/falcon_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_LANTIQ=y
-CONFIG_SOC_FALCON=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_DEFAULT_HOSTNAME="falcon"
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt"
-CONFIG_INITRAMFS_ROOT_UID=1000
-CONFIG_INITRAMFS_ROOT_GID=1000
-+# CONFIG_RD_GZIP is not set
-CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-CONFIG_NETFILTER=y
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=y
-CONFIG_NET_SCHED=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_LANTIQ=y
-CONFIG_MTD_M25P80=y
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_PHYLIB=y
-CONFIG_SERIAL_LANTIQ=y
-CONFIG_I2C=y
-CONFIG_I2C_FALCON=y
-CONFIG_SPI=y
-CONFIG_SPI_FALCON=y
-CONFIG_PINCTRL=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_WATCHDOG=y
-CONFIG_LANTIQ_WDT=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
diff --git a/target/linux/lantiq/files/arch/mips/configs/xway_defconfig b/target/linux/lantiq/files/arch/mips/configs/xway_defconfig
deleted file mode 100644
index 510a9641d3..0000000000
--- a/target/linux/lantiq/files/arch/mips/configs/xway_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_LANTIQ=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_DEFAULT_HOSTNAME="danube"
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt"
-CONFIG_INITRAMFS_ROOT_UID=1000
-CONFIG_INITRAMFS_ROOT_GID=1000
-# CONFIG_RD_GZIP is not set
-CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-CONFIG_NETFILTER=y
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=y
-CONFIG_NET_SCHED=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_LANTIQ=y
-CONFIG_MISC_DEVICES=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_LANTIQ_ETOP=y
-CONFIG_PHYLIB=y
-CONFIG_SERIAL_LANTIQ=y
-CONFIG_PINCTRL=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_WATCHDOG=y
-CONFIG_LANTIQ_WDT=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/clkdev.h b/target/linux/lantiq/files/arch/mips/include/asm/clkdev.h
deleted file mode 100644
index 262475414e..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/clkdev.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * based on arch/arm/include/asm/clkdev.h
- *
- * Copyright (C) 2008 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Helper for the clk API to assist looking up a struct clk.
- */
-#ifndef __ASM_CLKDEV_H
-#define __ASM_CLKDEV_H
-
-#include <linux/slab.h>
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
-{
- return kzalloc(size, GFP_KERNEL);
-}
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h
deleted file mode 100644
index adb531c39b..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Lantiq GPIO button support
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _LANTIQ_DEV_GPIO_BUTTONS_H
-#define _LANTIQ_DEV_GPIO_BUTTONS_H
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#define LTQ_KEYS_POLL_INTERVAL 20 /* msecs */
-#define LTQ_KEYS_DEBOUNCE_INTERVAL (3 * LTQ_KEYS_POLL_INTERVAL)
-
-void ltq_register_gpio_keys_polled(int id,
- unsigned poll_interval,
- unsigned nbuttons,
- struct gpio_keys_button *buttons);
-
-#endif /* _LANTIQ_DEV_GPIO_BUTTONS_H */
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h
deleted file mode 100644
index d51e496d14..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Lantiq GPIO LED device support
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _LANTIQ_DEV_LEDS_GPIO_H
-#define _LANTIQ_DEV_LEDS_GPIO_H
-
-#include <linux/leds.h>
-
-void ltq_add_device_gpio_leds(int id,
- unsigned num_leds,
- struct gpio_led *leds) __init;
-
-#endif /* _LANTIQ_DEV_LEDS_GPIO_H */
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
deleted file mode 100644
index 4dc6466e84..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
- */
-
-#ifndef _FALCON_IRQ__
-#define _FALCON_IRQ__
-
-#define INT_NUM_IRQ0 8
-#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
-#define INT_NUM_IM1_IRL0 (INT_NUM_IM0_IRL0 + 32)
-#define INT_NUM_IM2_IRL0 (INT_NUM_IM1_IRL0 + 32)
-#define INT_NUM_IM3_IRL0 (INT_NUM_IM2_IRL0 + 32)
-#define INT_NUM_IM4_IRL0 (INT_NUM_IM3_IRL0 + 32)
-#define INT_NUM_EXTRA_START (INT_NUM_IM4_IRL0 + 32)
-#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
-
-#define MIPS_CPU_TIMER_IRQ 7
-
-/* HOST IF Event Interrupt */
-#define FALCON_IRQ_HOST (INT_NUM_IM0_IRL0 + 0)
-/* HOST IF Mailbox0 Receive Interrupt */
-#define FALCON_IRQ_HOST_MB0_RX (INT_NUM_IM0_IRL0 + 1)
-/* HOST IF Mailbox0 Transmit Interrupt */
-#define FALCON_IRQ_HOST_MB0_TX (INT_NUM_IM0_IRL0 + 2)
-/* HOST IF Mailbox1 Receive Interrupt */
-#define FALCON_IRQ_HOST_MB1_RX (INT_NUM_IM0_IRL0 + 3)
-/* HOST IF Mailbox1 Transmit Interrupt */
-#define FALCON_IRQ_HOST_MB1_TX (INT_NUM_IM0_IRL0 + 4)
-/* I2C Last Single Data Transfer Request */
-#define FALCON_IRQ_I2C_LSREQ (INT_NUM_IM0_IRL0 + 8)
-/* I2C Single Data Transfer Request */
-#define FALCON_IRQ_I2C_SREQ (INT_NUM_IM0_IRL0 + 9)
-/* I2C Last Burst Data Transfer Request */
-#define FALCON_IRQ_I2C_LBREQ (INT_NUM_IM0_IRL0 + 10)
-/* I2C Burst Data Transfer Request */
-#define FALCON_IRQ_I2C_BREQ (INT_NUM_IM0_IRL0 + 11)
-/* I2C Error Interrupt */
-#define FALCON_IRQ_I2C_I2C_ERR (INT_NUM_IM0_IRL0 + 12)
-/* I2C Protocol Interrupt */
-#define FALCON_IRQ_I2C_I2C_P (INT_NUM_IM0_IRL0 + 13)
-/* SSC Transmit Interrupt */
-#define FALCON_IRQ_SSC_T (INT_NUM_IM0_IRL0 + 14)
-/* SSC Receive Interrupt */
-#define FALCON_IRQ_SSC_R (INT_NUM_IM0_IRL0 + 15)
-/* SSC Error Interrupt */
-#define FALCON_IRQ_SSC_E (INT_NUM_IM0_IRL0 + 16)
-/* SSC Frame Interrupt */
-#define FALCON_IRQ_SSC_F (INT_NUM_IM0_IRL0 + 17)
-/* Advanced Encryption Standard Interrupt */
-#define FALCON_IRQ_AES_AES (INT_NUM_IM0_IRL0 + 27)
-/* Secure Hash Algorithm Interrupt */
-#define FALCON_IRQ_SHA_HASH (INT_NUM_IM0_IRL0 + 28)
-/* PCM Receive Interrupt */
-#define FALCON_IRQ_PCM_RX (INT_NUM_IM0_IRL0 + 29)
-/* PCM Transmit Interrupt */
-#define FALCON_IRQ_PCM_TX (INT_NUM_IM0_IRL0 + 30)
-/* PCM Transmit Crash Interrupt */
-#define FALCON_IRQ_PCM_HW2_CRASH (INT_NUM_IM0_IRL0 + 31)
-
-/* EBU Serial Flash Command Error */
-#define FALCON_IRQ_EBU_SF_CMDERR (INT_NUM_IM1_IRL0 + 0)
-/* EBU Serial Flash Command Overwrite Error */
-#define FALCON_IRQ_EBU_SF_COVERR (INT_NUM_IM1_IRL0 + 1)
-/* EBU Serial Flash Busy */
-#define FALCON_IRQ_EBU_SF_BUSY (INT_NUM_IM1_IRL0 + 2)
-/* External Interrupt from GPIO P0 */
-#define FALCON_IRQ_GPIO_P0 (INT_NUM_IM1_IRL0 + 4)
-/* External Interrupt from GPIO P1 */
-#define FALCON_IRQ_GPIO_P1 (INT_NUM_IM1_IRL0 + 5)
-/* External Interrupt from GPIO P2 */
-#define FALCON_IRQ_GPIO_P2 (INT_NUM_IM1_IRL0 + 6)
-/* External Interrupt from GPIO P3 */
-#define FALCON_IRQ_GPIO_P3 (INT_NUM_IM1_IRL0 + 7)
-/* External Interrupt from GPIO P4 */
-#define FALCON_IRQ_GPIO_P4 (INT_NUM_IM1_IRL0 + 8)
-/* 8kHz backup interrupt derived from core-PLL */
-#define FALCON_IRQ_FSC_BKP (INT_NUM_IM1_IRL0 + 10)
-/* FSC Timer Interrupt 0 */
-#define FALCON_IRQ_FSCT_CMP0 (INT_NUM_IM1_IRL0 + 11)
-/* FSC Timer Interrupt 1 */
-#define FALCON_IRQ_FSCT_CMP1 (INT_NUM_IM1_IRL0 + 12)
-/* 8kHz root interrupt derived from GPON interface */
-#define FALCON_IRQ_FSC_ROOT (INT_NUM_IM1_IRL0 + 13)
-/* Time of Day */
-#define FALCON_IRQ_TOD (INT_NUM_IM1_IRL0 + 14)
-/* PMA Interrupt from IntNode of the 200MHz Domain */
-#define FALCON_IRQ_PMA_200M (INT_NUM_IM1_IRL0 + 15)
-/* PMA Interrupt from IntNode of the TX Clk Domain */
-#define FALCON_IRQ_PMA_TX (INT_NUM_IM1_IRL0 + 16)
-/* PMA Interrupt from IntNode of the RX Clk Domain */
-#define FALCON_IRQ_PMA_RX (INT_NUM_IM1_IRL0 + 17)
-/* SYS1 Interrupt */
-#define FALCON_IRQ_SYS1 (INT_NUM_IM1_IRL0 + 20)
-/* SYS GPE Interrupt */
-#define FALCON_IRQ_SYS_GPE (INT_NUM_IM1_IRL0 + 21)
-/* Watchdog Access Error Interrupt */
-#define FALCON_IRQ_WDT_AEIR (INT_NUM_IM1_IRL0 + 24)
-/* Watchdog Prewarning Interrupt */
-#define FALCON_IRQ_WDT_PIR (INT_NUM_IM1_IRL0 + 25)
-/* SBIU interrupt */
-#define FALCON_IRQ_SBIU0 (INT_NUM_IM1_IRL0 + 27)
-/* FPI Bus Control Unit Interrupt */
-#define FALCON_IRQ_BCU0 (INT_NUM_IM1_IRL0 + 29)
-/* DDR Controller Interrupt */
-#define FALCON_IRQ_DDR (INT_NUM_IM1_IRL0 + 30)
-/* Crossbar Error Interrupt */
-#define FALCON_IRQ_XBAR_ERROR (INT_NUM_IM1_IRL0 + 31)
-
-/* ICTRLL 0 Interrupt */
-#define FALCON_IRQ_ICTRLL0 (INT_NUM_IM2_IRL0 + 0)
-/* ICTRLL 1 Interrupt */
-#define FALCON_IRQ_ICTRLL1 (INT_NUM_IM2_IRL0 + 1)
-/* ICTRLL 2 Interrupt */
-#define FALCON_IRQ_ICTRLL2 (INT_NUM_IM2_IRL0 + 2)
-/* ICTRLL 3 Interrupt */
-#define FALCON_IRQ_ICTRLL3 (INT_NUM_IM2_IRL0 + 3)
-/* OCTRLL 0 Interrupt */
-#define FALCON_IRQ_OCTRLL0 (INT_NUM_IM2_IRL0 + 4)
-/* OCTRLL 1 Interrupt */
-#define FALCON_IRQ_OCTRLL1 (INT_NUM_IM2_IRL0 + 5)
-/* OCTRLL 2 Interrupt */
-#define FALCON_IRQ_OCTRLL2 (INT_NUM_IM2_IRL0 + 6)
-/* OCTRLL 3 Interrupt */
-#define FALCON_IRQ_OCTRLL3 (INT_NUM_IM2_IRL0 + 7)
-/* OCTRLG Interrupt */
-#define FALCON_IRQ_OCTRLG (INT_NUM_IM2_IRL0 + 9)
-/* IQM Interrupt */
-#define FALCON_IRQ_IQM (INT_NUM_IM2_IRL0 + 10)
-/* FSQM Interrupt */
-#define FALCON_IRQ_FSQM (INT_NUM_IM2_IRL0 + 11)
-/* TMU Interrupt */
-#define FALCON_IRQ_TMU (INT_NUM_IM2_IRL0 + 12)
-/* LINK1 Interrupt */
-#define FALCON_IRQ_LINK1 (INT_NUM_IM2_IRL0 + 14)
-/* ICTRLC 0 Interrupt */
-#define FALCON_IRQ_ICTRLC0 (INT_NUM_IM2_IRL0 + 16)
-/* ICTRLC 1 Interrupt */
-#define FALCON_IRQ_ICTRLC1 (INT_NUM_IM2_IRL0 + 17)
-/* OCTRLC Interrupt */
-#define FALCON_IRQ_OCTRLC (INT_NUM_IM2_IRL0 + 18)
-/* CONFIG Break Interrupt */
-#define FALCON_IRQ_CONFIG_BREAK (INT_NUM_IM2_IRL0 + 19)
-/* CONFIG Interrupt */
-#define FALCON_IRQ_CONFIG (INT_NUM_IM2_IRL0 + 20)
-/* Dispatcher Interrupt */
-#define FALCON_IRQ_DISP (INT_NUM_IM2_IRL0 + 21)
-/* TBM Interrupt */
-#define FALCON_IRQ_TBM (INT_NUM_IM2_IRL0 + 22)
-/* GTC Downstream Interrupt */
-#define FALCON_IRQ_GTC_DS (INT_NUM_IM2_IRL0 + 29)
-/* GTC Upstream Interrupt */
-#define FALCON_IRQ_GTC_US (INT_NUM_IM2_IRL0 + 30)
-/* EIM Interrupt */
-#define FALCON_IRQ_EIM (INT_NUM_IM2_IRL0 + 31)
-
-/* ASC0 Transmit Interrupt */
-#define FALCON_IRQ_ASC0_T (INT_NUM_IM3_IRL0 + 0)
-/* ASC0 Receive Interrupt */
-#define FALCON_IRQ_ASC0_R (INT_NUM_IM3_IRL0 + 1)
-/* ASC0 Error Interrupt */
-#define FALCON_IRQ_ASC0_E (INT_NUM_IM3_IRL0 + 2)
-/* ASC0 Transmit Buffer Interrupt */
-#define FALCON_IRQ_ASC0_TB (INT_NUM_IM3_IRL0 + 3)
-/* ASC0 Autobaud Start Interrupt */
-#define FALCON_IRQ_ASC0_ABST (INT_NUM_IM3_IRL0 + 4)
-/* ASC0 Autobaud Detection Interrupt */
-#define FALCON_IRQ_ASC0_ABDET (INT_NUM_IM3_IRL0 + 5)
-/* ASC1 Modem Status Interrupt */
-#define FALCON_IRQ_ASC0_MS (INT_NUM_IM3_IRL0 + 6)
-/* ASC0 Soft Flow Control Interrupt */
-#define FALCON_IRQ_ASC0_SFC (INT_NUM_IM3_IRL0 + 7)
-/* ASC1 Transmit Interrupt */
-#define FALCON_IRQ_ASC1_T (INT_NUM_IM3_IRL0 + 8)
-/* ASC1 Receive Interrupt */
-#define FALCON_IRQ_ASC1_R (INT_NUM_IM3_IRL0 + 9)
-/* ASC1 Error Interrupt */
-#define FALCON_IRQ_ASC1_E (INT_NUM_IM3_IRL0 + 10)
-/* ASC1 Transmit Buffer Interrupt */
-#define FALCON_IRQ_ASC1_TB (INT_NUM_IM3_IRL0 + 11)
-/* ASC1 Autobaud Start Interrupt */
-#define FALCON_IRQ_ASC1_ABST (INT_NUM_IM3_IRL0 + 12)
-/* ASC1 Autobaud Detection Interrupt */
-#define FALCON_IRQ_ASC1_ABDET (INT_NUM_IM3_IRL0 + 13)
-/* ASC1 Modem Status Interrupt */
-#define FALCON_IRQ_ASC1_MS (INT_NUM_IM3_IRL0 + 14)
-/* ASC1 Soft Flow Control Interrupt */
-#define FALCON_IRQ_ASC1_SFC (INT_NUM_IM3_IRL0 + 15)
-/* GPTC Timer/Counter 1A Interrupt */
-#define FALCON_IRQ_GPTC_TC1A (INT_NUM_IM3_IRL0 + 16)
-/* GPTC Timer/Counter 1B Interrupt */
-#define FALCON_IRQ_GPTC_TC1B (INT_NUM_IM3_IRL0 + 17)
-/* GPTC Timer/Counter 2A Interrupt */
-#define FALCON_IRQ_GPTC_TC2A (INT_NUM_IM3_IRL0 + 18)
-/* GPTC Timer/Counter 2B Interrupt */
-#define FALCON_IRQ_GPTC_TC2B (INT_NUM_IM3_IRL0 + 19)
-/* GPTC Timer/Counter 3A Interrupt */
-#define FALCON_IRQ_GPTC_TC3A (INT_NUM_IM3_IRL0 + 20)
-/* GPTC Timer/Counter 3B Interrupt */
-#define FALCON_IRQ_GPTC_TC3B (INT_NUM_IM3_IRL0 + 21)
-/* DFEV0, Channel 1 Transmit Interrupt */
-#define FALCON_IRQ_DFEV0_2TX (INT_NUM_IM3_IRL0 + 26)
-/* DFEV0, Channel 1 Receive Interrupt */
-#define FALCON_IRQ_DFEV0_2RX (INT_NUM_IM3_IRL0 + 27)
-/* DFEV0, Channel 1 General Purpose Interrupt */
-#define FALCON_IRQ_DFEV0_2GP (INT_NUM_IM3_IRL0 + 28)
-/* DFEV0, Channel 0 Transmit Interrupt */
-#define FALCON_IRQ_DFEV0_1TX (INT_NUM_IM3_IRL0 + 29)
-/* DFEV0, Channel 0 Receive Interrupt */
-#define FALCON_IRQ_DFEV0_1RX (INT_NUM_IM3_IRL0 + 30)
-/* DFEV0, Channel 0 General Purpose Interrupt */
-#define FALCON_IRQ_DFEV0_1GP (INT_NUM_IM3_IRL0 + 31)
-
-/* ICTRLL 0 Error */
-#define FALCON_IRQ_ICTRLL0_ERR (INT_NUM_IM4_IRL0 + 0)
-/* ICTRLL 1 Error */
-#define FALCON_IRQ_ICTRLL1_ERR (INT_NUM_IM4_IRL0 + 1)
-/* ICTRLL 2 Error */
-#define FALCON_IRQ_ICTRLL2_ERR (INT_NUM_IM4_IRL0 + 2)
-/* ICTRLL 3 Error */
-#define FALCON_IRQ_ICTRLL3_ERR (INT_NUM_IM4_IRL0 + 3)
-/* OCTRLL 0 Error */
-#define FALCON_IRQ_OCTRLL0_ERR (INT_NUM_IM4_IRL0 + 4)
-/* OCTRLL 1 Error */
-#define FALCON_IRQ_OCTRLL1_ERR (INT_NUM_IM4_IRL0 + 5)
-/* OCTRLL 2 Error */
-#define FALCON_IRQ_OCTRLL2_ERR (INT_NUM_IM4_IRL0 + 6)
-/* OCTRLL 3 Error */
-#define FALCON_IRQ_OCTRLL3_ERR (INT_NUM_IM4_IRL0 + 7)
-/* ICTRLG Error */
-#define FALCON_IRQ_ICTRLG_ERR (INT_NUM_IM4_IRL0 + 8)
-/* OCTRLG Error */
-#define FALCON_IRQ_OCTRLG_ERR (INT_NUM_IM4_IRL0 + 9)
-/* IQM Error */
-#define FALCON_IRQ_IQM_ERR (INT_NUM_IM4_IRL0 + 10)
-/* FSQM Error */
-#define FALCON_IRQ_FSQM_ERR (INT_NUM_IM4_IRL0 + 11)
-/* TMU Error */
-#define FALCON_IRQ_TMU_ERR (INT_NUM_IM4_IRL0 + 12)
-/* MPS Status Interrupt #0 (VPE1 to VPE0) */
-#define FALCON_IRQ_MPS_IR0 (INT_NUM_IM4_IRL0 + 14)
-/* MPS Status Interrupt #1 (VPE1 to VPE0) */
-#define FALCON_IRQ_MPS_IR1 (INT_NUM_IM4_IRL0 + 15)
-/* MPS Status Interrupt #2 (VPE1 to VPE0) */
-#define FALCON_IRQ_MPS_IR2 (INT_NUM_IM4_IRL0 + 16)
-/* MPS Status Interrupt #3 (VPE1 to VPE0) */
-#define FALCON_IRQ_MPS_IR3 (INT_NUM_IM4_IRL0 + 17)
-/* MPS Status Interrupt #4 (VPE1 to VPE0) */
-#define FALCON_IRQ_MPS_IR4 (INT_NUM_IM4_IRL0 + 18)
-/* MPS Status Interrupt #5 (VPE1 to VPE0) */
-#define FALCON_IRQ_MPS_IR5 (INT_NUM_IM4_IRL0 + 19)
-/* MPS Status Interrupt #6 (VPE1 to VPE0) */
-#define FALCON_IRQ_MPS_IR6 (INT_NUM_IM4_IRL0 + 20)
-/* MPS Status Interrupt #7 (VPE1 to VPE0) */
-#define FALCON_IRQ_MPS_IR7 (INT_NUM_IM4_IRL0 + 21)
-/* MPS Status Interrupt #8 (VPE1 to VPE0) */
-#define FALCON_IRQ_MPS_IR8 (INT_NUM_IM4_IRL0 + 22)
-/* VPE0 Exception Level Flag Interrupt */
-#define FALCON_IRQ_VPE0_EXL (INT_NUM_IM4_IRL0 + 29)
-/* VPE0 Error Level Flag Interrupt */
-#define FALCON_IRQ_VPE0_ERL (INT_NUM_IM4_IRL0 + 30)
-/* VPE0 Performance Monitoring Counter Interrupt */
-#define FALCON_IRQ_VPE0_PMCIR (INT_NUM_IM4_IRL0 + 31)
-
-#endif /* _FALCON_IRQ__ */
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/irq.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/irq.h
deleted file mode 100644
index 2caccd9f9d..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/irq.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
- */
-
-#ifndef __FALCON_IRQ_H
-#define __FALCON_IRQ_H
-
-#include <falcon_irq.h>
-
-#define NR_IRQS 328
-
-#include_next <irq.h>
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
deleted file mode 100644
index fff5ecdbea..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#ifndef _LTQ_FALCON_H__
-#define _LTQ_FALCON_H__
-
-#ifdef CONFIG_SOC_FALCON
-
-#include <lantiq.h>
-
-/* Chip IDs */
-#define SOC_ID_FALCON 0x01B8
-
-/* SoC Types */
-#define SOC_TYPE_FALCON 0x01
-
-/* ASC0/1 - serial port */
-#define LTQ_ASC0_BASE_ADDR 0x1E100C00
-#define LTQ_ASC1_BASE_ADDR 0x1E100B00
-#define LTQ_ASC_SIZE 0x100
-
-#define LTQ_ASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 8))
-#define LTQ_ASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 1)
-#define LTQ_ASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 2)
-
-/*
- * during early_printk no ioremap possible at this early stage
- * lets use KSEG1 instead
- */
-#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC0_BASE_ADDR)
-
-/* ICU - interrupt control unit */
-#define LTQ_ICU_BASE_ADDR 0x1F880200
-#define LTQ_ICU_SIZE 0x100
-
-/* WDT */
-#define LTQ_WDT_BASE_ADDR 0x1F8803F0
-#define LTQ_WDT_SIZE 0x10
-
-#define LTQ_RST_CAUSE_WDTRST 0x0002
-
-/* EBU - external bus unit */
-#define LTQ_EBU_BASE_ADDR 0x18000000
-#define LTQ_EBU_SIZE 0x0100
-
-#define LTQ_EBU_MODCON 0x000C
-
-/* GPIO */
-#define LTQ_GPIO0_BASE_ADDR 0x1D810000
-#define LTQ_GPIO0_SIZE 0x0080
-#define LTQ_GPIO1_BASE_ADDR 0x1E800100
-#define LTQ_GPIO1_SIZE 0x0080
-#define LTQ_GPIO2_BASE_ADDR 0x1D810100
-#define LTQ_GPIO2_SIZE 0x0080
-#define LTQ_GPIO3_BASE_ADDR 0x1E800200
-#define LTQ_GPIO3_SIZE 0x0080
-#define LTQ_GPIO4_BASE_ADDR 0x1E800300
-#define LTQ_GPIO4_SIZE 0x0080
-#define LTQ_PADCTRL0_BASE_ADDR 0x1DB01000
-#define LTQ_PADCTRL0_SIZE 0x0100
-#define LTQ_PADCTRL1_BASE_ADDR 0x1E800400
-#define LTQ_PADCTRL1_SIZE 0x0100
-#define LTQ_PADCTRL2_BASE_ADDR 0x1DB02000
-#define LTQ_PADCTRL2_SIZE 0x0100
-#define LTQ_PADCTRL3_BASE_ADDR 0x1E800500
-#define LTQ_PADCTRL3_SIZE 0x0100
-#define LTQ_PADCTRL4_BASE_ADDR 0x1E800600
-#define LTQ_PADCTRL4_SIZE 0x0100
-
-/* I2C */
-#define GPON_I2C_BASE 0x1E200000
-#define GPON_I2C_SIZE 0x00010000
-
-/* CHIP ID */
-#define LTQ_STATUS_BASE_ADDR 0x1E802000
-
-#define LTQ_FALCON_CHIPID ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x0c))
-#define LTQ_FALCON_CHIPTYPE ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x38))
-#define LTQ_FALCON_CHIPCONF ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x40))
-
-/* SYSCTL - start/stop/restart/configure/... different parts of the Soc */
-#define LTQ_SYS1_BASE_ADDR 0x1EF00000
-#define LTQ_SYS1_SIZE 0x0100
-#define LTQ_STATUS_BASE_ADDR 0x1E802000
-#define LTQ_STATUS_SIZE 0x0080
-#define LTQ_SYS_ETH_BASE_ADDR 0x1DB00000
-#define LTQ_SYS_ETH_SIZE 0x0100
-#define LTQ_SYS_GPE_BASE_ADDR 0x1D700000
-#define LTQ_SYS_GPE_SIZE 0x0100
-
-#define SYSCTL_SYS1 0
-#define SYSCTL_SYSETH 1
-#define SYSCTL_SYSGPE 2
-
-/* Activation Status Register */
-#define ACTS_ASC1_ACT 0x00000800
-#define ACTS_I2C_ACT 0x00004000
-#define ACTS_P0 0x00010000
-#define ACTS_P1 0x00010000
-#define ACTS_P2 0x00020000
-#define ACTS_P3 0x00020000
-#define ACTS_P4 0x00040000
-#define ACTS_PADCTRL0 0x00100000
-#define ACTS_PADCTRL1 0x00100000
-#define ACTS_PADCTRL2 0x00200000
-#define ACTS_PADCTRL3 0x00200000
-#define ACTS_PADCTRL4 0x00400000
-#define ACTS_I2C_ACT 0x00004000
-
-/* global register ranges */
-extern __iomem void *ltq_ebu_membase;
-extern __iomem void *ltq_sys1_membase;
-#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y))
-#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x))
-#define ltq_ebu_w32_mask(clear, set, reg) \
- ltq_ebu_w32((ltq_ebu_r32(reg) & ~(clear)) | (set), reg)
-
-#define ltq_sys1_w32(x, y) ltq_w32((x), ltq_sys1_membase + (y))
-#define ltq_sys1_r32(x) ltq_r32(ltq_sys1_membase + (x))
-#define ltq_sys1_w32_mask(clear, set, reg) \
- ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
-
-/* gpio wrapper to help configure the pin muxing */
-extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux);
-
-/* to keep the irq code generic we need to define these to 0 as falcon
- has no EIU/EBU */
-#define LTQ_EIU_BASE_ADDR 0
-#define LTQ_EBU_PCC_ISTAT 0
-
-static inline int ltq_is_ar9(void)
-{
- return 0;
-}
-
-static inline int ltq_is_vr9(void)
-{
- return 0;
-}
-
-static inline int ltq_is_falcon(void)
-{
- return 1;
-}
-
-#endif /* CONFIG_SOC_FALCON */
-#endif /* _LTQ_XWAY_H__ */
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/lantiq_timer.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
deleted file mode 100644
index ef564abc3a..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+++ /dev/null
@@ -1,155 +0,0 @@
-#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-
-
-/******************************************************************************
- Copyright (c) 2002, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
-******************************************************************************/
-
-
-/*
- * ####################################
- * Definition
- * ####################################
- */
-
-/*
- * Available Timer/Counter Index
- */
-#define TIMER(n, X) (n * 2 + (X ? 1 : 0))
-#define TIMER_ANY 0x00
-#define TIMER1A TIMER(1, 0)
-#define TIMER1B TIMER(1, 1)
-#define TIMER2A TIMER(2, 0)
-#define TIMER2B TIMER(2, 1)
-#define TIMER3A TIMER(3, 0)
-#define TIMER3B TIMER(3, 1)
-
-/*
- * Flag of Timer/Counter
- * These flags specify the way in which timer is configured.
- */
-/* Bit size of timer/counter. */
-#define TIMER_FLAG_16BIT 0x0000
-#define TIMER_FLAG_32BIT 0x0001
-/* Switch between timer and counter. */
-#define TIMER_FLAG_TIMER 0x0000
-#define TIMER_FLAG_COUNTER 0x0002
-/* Stop or continue when overflowing/underflowing. */
-#define TIMER_FLAG_ONCE 0x0000
-#define TIMER_FLAG_CYCLIC 0x0004
-/* Count up or counter down. */
-#define TIMER_FLAG_UP 0x0000
-#define TIMER_FLAG_DOWN 0x0008
-/* Count on specific level or edge. */
-#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
-#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040
-#define TIMER_FLAG_RISE_EDGE 0x0010
-#define TIMER_FLAG_FALL_EDGE 0x0020
-#define TIMER_FLAG_ANY_EDGE 0x0030
-/* Signal is syncronous to module clock or not. */
-#define TIMER_FLAG_UNSYNC 0x0000
-#define TIMER_FLAG_SYNC 0x0080
-/* Different interrupt handle type. */
-#define TIMER_FLAG_NO_HANDLE 0x0000
-#if defined(__KERNEL__)
- #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100
-#endif // defined(__KERNEL__)
-#define TIMER_FLAG_SIGNAL 0x0300
-/* Internal clock source or external clock source */
-#define TIMER_FLAG_INT_SRC 0x0000
-#define TIMER_FLAG_EXT_SRC 0x1000
-
-
-/*
- * ioctl Command
- */
-#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */
-#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */
-#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */
-#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */
-#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */
-#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/
-#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */
-#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */
-
-/*
- * Data Type Used to Call ioctl
- */
-struct gptu_ioctl_param {
- unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
- * GPTU_SET_COUNTER, this field is ID of expected *
- * timer/counter. If it's zero, a timer/counter would *
- * be dynamically allocated and ID would be stored in *
- * this field. *
- * In command GPTU_GET_COUNT_VALUE, this field is *
- * ignored. *
- * In other command, this field is ID of timer/counter *
- * allocated. */
- unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
- * GPTU_SET_COUNTER, this field contains flags to *
- * specify how to configure timer/counter. *
- * In command GPTU_START_TIMER, zero indicate start *
- * and non-zero indicate resume timer/counter. *
- * In other command, this field is ignored. */
- unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains *
- * init/reload value. *
- * In command GPTU_SET_TIMER, this field contains *
- * frequency (0.001Hz) of timer. *
- * In command GPTU_GET_COUNT_VALUE, current count *
- * value would be stored in this field. *
- * In command GPTU_CALCULATE_DIVIDER, this field *
- * contains frequency wanted, and after calculation, *
- * divider would be stored in this field to overwrite *
- * the frequency. *
- * In other command, this field is ignored. */
- int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
- * if signal is required, this field contains process *
- * ID to which signal would be sent. *
- * In other command, this field is ignored. */
- int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
- * if signal is required, this field contains signal *
- * number which would be sent. *
- * In other command, this field is ignored. */
-};
-
-/*
- * ####################################
- * Data Type
- * ####################################
- */
-typedef void (*timer_callback)(unsigned long arg);
-
-extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
-extern int lq_free_timer(unsigned int);
-extern int lq_start_timer(unsigned int, int);
-extern int lq_stop_timer(unsigned int);
-extern int lq_reset_counter_flags(u32 timer, u32 flags);
-extern int lq_get_count_value(unsigned int, unsigned long *);
-extern u32 lq_cal_divider(unsigned long);
-extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
-extern int lq_set_counter(unsigned int timer, unsigned int flag,
- u32 reload, unsigned long arg1, unsigned long arg2);
-
-#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/base_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/base_reg.h
deleted file mode 100644
index 8149f1204e..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/base_reg.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __BASE_REG_H
-#define __BASE_REG_H
-
-#ifndef KSEG1
-#define KSEG1 0xA0000000
-#endif
-
-#define LTQ_EBU_SEG1_BASE (KSEG1 + 0x10000000)
-#define LTQ_EBU_SEG2_BASE (KSEG1 + 0x11000000)
-#define LTQ_EBU_SEG3_BASE (KSEG1 + 0x12000000)
-#define LTQ_EBU_SEG4_BASE (KSEG1 + 0x13000000)
-
-#define LTQ_ASC0_BASE (KSEG1 + 0x14100100)
-#define LTQ_ASC1_BASE (KSEG1 + 0x14100200)
-
-#define LTQ_SSC0_BASE (0x14100300)
-#define LTQ_SSC1_BASE (0x14100400)
-
-#define LTQ_PORT_P0_BASE (KSEG1 + 0x14100600)
-#define LTQ_PORT_P1_BASE (KSEG1 + 0x14108100)
-#define LTQ_PORT_P2_BASE (KSEG1 + 0x14100800)
-#define LTQ_PORT_P3_BASE (KSEG1 + 0x14100900)
-#define LTQ_PORT_P4_BASE (KSEG1 + 0x1E000400)
-
-#define LTQ_EBU_BASE (KSEG1 + 0x14102000)
-#define LTQ_DMA_BASE (KSEG1 + 0x14104000)
-
-#define LTQ_ICU0_IM3_IM2_BASE (KSEG1 + 0x1E016000)
-#define LTQ_ICU0_IM5_IM4_IM1_IM0_BASE (KSEG1 + 0x14106000)
-
-#define LTQ_ES_BASE (KSEG1 + 0x18000000)
-
-#define LTQ_SYS0_BASE (KSEG1 + 0x1C000000)
-#define LTQ_SYS1_BASE (KSEG1 + 0x1C000800)
-#define LTQ_SYS2_BASE (KSEG1 + 0x1E400000)
-
-#define LTQ_L2_SPRAM_BASE (KSEG1 + 0x1F1E8000)
-
-#define LTQ_SWINT_BASE (KSEG1 + 0x1E000100)
-#define LTQ_MBS_BASE (KSEG1 + 0x1E000200)
-
-#define LTQ_STATUS_BASE (KSEG1 + 0x1E000500)
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/boot_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/boot_reg.h
deleted file mode 100644
index 9c33516e8a..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/boot_reg.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
-******************************************************************************/
-
-#ifndef __BOOT_REG_H
-#define __BOOT_REG_H
-
-#define LTQ_BOOT_CPU_OFFSET 0x20
-
-#define LTQ_BOOT_RVEC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \
- (cpu * LTQ_BOOT_CPU_OFFSET) + 0x00)
-#define LTQ_BOOT_NVEC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \
- (cpu * LTQ_BOOT_CPU_OFFSET) + 0x04)
-#define LTQ_BOOT_EVEC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \
- (cpu * LTQ_BOOT_CPU_OFFSET) + 0x08)
-#define LTQ_BOOT_CP0_STATUS(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \
- (cpu * LTQ_BOOT_CPU_OFFSET) + 0x0C)
-#define LTQ_BOOT_CP0_EPC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \
- (cpu * LTQ_BOOT_CPU_OFFSET) + 0x10)
-#define LTQ_BOOT_CP0_EEPC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \
- (cpu * LTQ_BOOT_CPU_OFFSET) + 0x14)
-#define LTQ_BOOT_SIZE(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \
- (cpu * LTQ_BOOT_CPU_OFFSET) + 0x18) /* only for CP1 */
-#define LTQ_BOOT_RCU_SR(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \
- (cpu * LTQ_BOOT_CPU_OFFSET) + 0x18) /* only for CP0 */
-#define LTQ_BOOT_CFG_STAT(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \
- (cpu * LTQ_BOOT_CPU_OFFSET) + 0x1C)
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/dma_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/dma_reg.h
deleted file mode 100644
index 9fde2f6dd3..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/dma_reg.h
+++ /dev/null
@@ -1,308 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __DMA_REG_H
-#define __DMA_REG_H
-
-#define dma_r32(reg) ltq_r32(&dma->reg)
-#define dma_w32(val, reg) ltq_w32(val, &dma->reg)
-#define dma_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &dma->reg)
-
-/** DMA register structure */
-struct svip_reg_dma {
- volatile unsigned long clc; /* 0x00 */
- volatile unsigned long reserved0; /* 0x04 */
- volatile unsigned long id; /* 0x08 */
- volatile unsigned long reserved1; /* 0x0c */
- volatile unsigned long ctrl; /* 0x10 */
- volatile unsigned long cpoll; /* 0x14 */
- volatile unsigned long cs; /* 0x18 */
- volatile unsigned long cctrl; /* 0x1C */
- volatile unsigned long cdba; /* 0x20 */
- volatile unsigned long cdlen; /* 0x24 */
- volatile unsigned long cis; /* 0x28 */
- volatile unsigned long cie; /* 0x2C */
- volatile unsigned long cgbl; /* 0x30 */
- volatile unsigned long reserved2[3]; /* 0x34 */
- volatile unsigned long ps; /* 0x40 */
- volatile unsigned long pctrl; /* 0x44 */
- volatile unsigned long reserved3[43]; /* 0x48 */
- volatile unsigned long irnen; /* 0xF4 */
- volatile unsigned long irncr; /* 0xF8 */
- volatile unsigned long irnicr; /* 0xFC */
-};
-
-/*******************************************************************************
- * CLC Register
- ******************************************************************************/
-
-/* Fast Shut-Off Enable Bit (5) */
-#define DMA_CLC_FSOE (0x1 << 5)
-#define DMA_CLC_FSOE_VAL(val) (((val) & 0x1) << 5)
-#define DMA_CLC_FSOE_GET(val) ((((val) & DMA_CLC_FSOE) >> 5) & 0x1)
-#define DMA_CLC_FSOE_SET(reg,val) (reg) = ((reg & ~DMA_CLC_FSOE) | (((val) & 0x1) << 5))
-/* Suspend Bit Write Enable for OCDS (4) */
-#define DMA_CLC_SBWE (0x1 << 4)
-#define DMA_CLC_SBWE_VAL(val) (((val) & 0x1) << 4)
-#define DMA_CLC_SBWE_SET(reg,val) (reg) = (((reg & ~DMA_CLC_SBWE) | (val) & 1) << 4)
-/* External Request Disable (3) */
-#define DMA_CLC_EDIS (0x1 << 3)
-#define DMA_CLC_EDIS_VAL(val) (((val) & 0x1) << 3)
-#define DMA_CLC_EDIS_GET(val) ((((val) & DMA_CLC_EDIS) >> 3) & 0x1)
-#define DMA_CLC_EDIS_SET(reg,val) (reg) = ((reg & ~DMA_CLC_EDIS) | (((val) & 0x1) << 3))
-/* Suspend Enable Bit for OCDS (2) */
-#define DMA_CLC_SPEN (0x1 << 2)
-#define DMA_CLC_SPEN_VAL(val) (((val) & 0x1) << 2)
-#define DMA_CLC_SPEN_GET(val) ((((val) & DMA_CLC_SPEN) >> 2) & 0x1)
-#define DMA_CLC_SPEN_SET(reg,val) (reg) = ((reg & ~DMA_CLC_SPEN) | (((val) & 0x1) << 2))
-/* Disable Status Bit (1) */
-#define DMA_CLC_DISS (0x1 << 1)
-#define DMA_CLC_DISS_GET(val) ((((val) & DMA_CLC_DISS) >> 1) & 0x1)
-/* Disable Request Bit (0) */
-#define DMA_CLC_DISR (0x1)
-#define DMA_CLC_DISR_VAL(val) (((val) & 0x1) << 0)
-#define DMA_CLC_DISR_GET(val) ((((val) & DMA_CLC_DISR) >> 0) & 0x1)
-#define DMA_CLC_DISR_SET(reg,val) (reg) = ((reg & ~DMA_CLC_DISR) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * ID Register
- ******************************************************************************/
-
-/* Number of Channels (25:20) */
-#define DMA_ID_CHNR (0x3f << 20)
-#define DMA_ID_CHNR_GET(val) ((((val) & DMA_ID_CHNR) >> 20) & 0x3f)
-/* Number of Ports (19:16) */
-#define DMA_ID_PRTNR (0xf << 16)
-#define DMA_ID_PRTNR_GET(val) ((((val) & DMA_ID_PRTNR) >> 16) & 0xf)
-/* Module ID (15:8) */
-#define DMA_ID_ID (0xff << 8)
-#define DMA_ID_ID_GET(val) ((((val) & DMA_ID_ID) >> 8) & 0xff)
-/* Revision (4:0) */
-#define DMA_ID_REV (0x1f)
-#define DMA_ID_REV_GET(val) ((((val) & DMA_ID_REV) >> 0) & 0x1f)
-
-/*******************************************************************************
- * Control Register
- ******************************************************************************/
-
-/* Global Software Reset (0) */
-#define DMA_CTRL_RST (0x1)
-#define DMA_CTRL_RST_GET(val) ((((val) & DMA_CTRL_RST) >> 0) & 0x1)
-
-/*******************************************************************************
- * Channel Polling Register
- ******************************************************************************/
-
-/* Enable (31) */
-#define DMA_CPOLL_EN (0x1 << 31)
-#define DMA_CPOLL_EN_VAL(val) (((val) & 0x1) << 31)
-#define DMA_CPOLL_EN_GET(val) ((((val) & DMA_CPOLL_EN) >> 31) & 0x1)
-#define DMA_CPOLL_EN_SET(reg,val) (reg) = ((reg & ~DMA_CPOLL_EN) | (((val) & 0x1) << 31))
-/* Counter (15:4) */
-#define DMA_CPOLL_CNT (0xfff << 4)
-#define DMA_CPOLL_CNT_VAL(val) (((val) & 0xfff) << 4)
-#define DMA_CPOLL_CNT_GET(val) ((((val) & DMA_CPOLL_CNT) >> 4) & 0xfff)
-#define DMA_CPOLL_CNT_SET(reg,val) (reg) = ((reg & ~DMA_CPOLL_CNT) | (((val) & 0xfff) << 4))
-
-/*******************************************************************************
- * Global Buffer Length Register
- ******************************************************************************/
-
-/* Global Buffer Length (15:0) */
-#define DMA_CGBL_GBL (0xffff)
-#define DMA_CGBL_GBL_VAL(val) (((val) & 0xffff) << 0)
-#define DMA_CGBL_GBL_GET(val) ((((val) & DMA_CGBL_GBL) >> 0) & 0xffff)
-#define DMA_CGBL_GBL_SET(reg,val) (reg) = ((reg & ~DMA_CGBL_GBL) | (((val) & 0xffff) << 0))
-
-/*******************************************************************************
- * Channel Select Register
- ******************************************************************************/
-
-/* Channel Selection (4:0) */
-#define DMA_CS_CS (0x1f)
-#define DMA_CS_CS_VAL(val) (((val) & 0x1f) << 0)
-#define DMA_CS_CS_GET(val) ((((val) & DMA_CS_CS) >> 0) & 0x1f)
-#define DMA_CS_CS_SET(reg,val) (reg) = ((reg & ~DMA_CS_CS) | (((val) & 0x1f) << 0))
-
-/*******************************************************************************
- * Channel Control Register
- ******************************************************************************/
-
-/* Peripheral to Peripheral Copy (24) */
-#define DMA_CCTRL_P2PCPY (0x1 << 24)
-#define DMA_CCTRL_P2PCPY_VAL(val) (((val) & 0x1) << 24)
-#define DMA_CCTRL_P2PCPY_GET(val) ((((val) & DMA_CCTRL_P2PCPY) >> 24) & 0x1)
-#define DMA_CCTRL_P2PCPY_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_P2PCPY) | (((val) & 0x1) << 24))
-/* Channel Weight for Transmit Direction (17:16) */
-#define DMA_CCTRL_TXWGT (0x3 << 16)
-#define DMA_CCTRL_TXWGT_VAL(val) (((val) & 0x3) << 16)
-#define DMA_CCTRL_TXWGT_GET(val) ((((val) & DMA_CCTRL_TXWGT) >> 16) & 0x3)
-#define DMA_CCTRL_TXWGT_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_TXWGT) | (((val) & 0x3) << 16))
-/* Port Assignment (13:11) */
-#define DMA_CCTRL_PRTNR (0x7 << 11)
-#define DMA_CCTRL_PRTNR_GET(val) ((((val) & DMA_CCTRL_PRTNR) >> 11) & 0x7)
-/* Class (10:9) */
-#define DMA_CCTRL_CLASS (0x3 << 9)
-#define DMA_CCTRL_CLASS_VAL(val) (((val) & 0x3) << 9)
-#define DMA_CCTRL_CLASS_GET(val) ((((val) & DMA_CCTRL_CLASS) >> 9) & 0x3)
-#define DMA_CCTRL_CLASS_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_CLASS) | (((val) & 0x3) << 9))
-/* Direction (8) */
-#define DMA_CCTRL_DIR (0x1 << 8)
-#define DMA_CCTRL_DIR_GET(val) ((((val) & DMA_CCTRL_DIR) >> 8) & 0x1)
-/* Reset (1) */
-#define DMA_CCTRL_RST (0x1 << 1)
-#define DMA_CCTRL_RST_VAL(val) (((val) & 0x1) << 1)
-#define DMA_CCTRL_RST_GET(val) ((((val) & DMA_CCTRL_RST) >> 1) & 0x1)
-#define DMA_CCTRL_RST_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_RST) | (((val) & 0x1) << 1))
-/* Channel On or Off (0) */
-#define DMA_CCTRL_ON_OFF (0x1)
-#define DMA_CCTRL_ON_OFF_VAL(val) (((val) & 0x1) << 0)
-#define DMA_CCTRL_ON_OFF_GET(val) ((((val) & DMA_CCTRL_ON_OFF) >> 0) & 0x1)
-#define DMA_CCTRL_ON_OFF_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_ON_OFF) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Channel Descriptor Base Address Register
- ******************************************************************************/
-
-/* Channel Descriptor Base Address (29:3) */
-#define DMA_CDBA_CDBA (0x7ffffff << 3)
-#define DMA_CDBA_CDBA_VAL(val) (((val) & 0x7ffffff) << 3)
-#define DMA_CDBA_CDBA_GET(val) ((((val) & DMA_CDBA_CDBA) >> 3) & 0x7ffffff)
-#define DMA_CDBA_CDBA_SET(reg,val) (reg) = ((reg & ~DMA_CDBA_CDBA) | (((val) & 0x7ffffff) << 3))
-
-/*******************************************************************************
- * Channel Descriptor Length Register
- ******************************************************************************/
-
-/* Channel Descriptor Length (7:0) */
-#define DMA_CDLEN_CDLEN (0xff)
-#define DMA_CDLEN_CDLEN_VAL(val) (((val) & 0xff) << 0)
-#define DMA_CDLEN_CDLEN_GET(val) ((((val) & DMA_CDLEN_CDLEN) >> 0) & 0xff)
-#define DMA_CDLEN_CDLEN_SET(reg,val) (reg) = ((reg & ~DMA_CDLEN_CDLEN) | (((val) & 0xff) << 0))
-
-/*******************************************************************************
- * Channel Interrupt Status Register
- ******************************************************************************/
-
-/* SAI Read Error Interrupt (5) */
-#define DMA_CIS_RDERR (0x1 << 5)
-#define DMA_CIS_RDERR_GET(val) ((((val) & DMA_CIS_RDERR) >> 5) & 0x1)
-/* Channel Off Interrupt (4) */
-#define DMA_CIS_CHOFF (0x1 << 4)
-#define DMA_CIS_CHOFF_GET(val) ((((val) & DMA_CIS_CHOFF) >> 4) & 0x1)
-/* Descriptor Complete Interrupt (3) */
-#define DMA_CIS_DESCPT (0x1 << 3)
-#define DMA_CIS_DESCPT_GET(val) ((((val) & DMA_CIS_DESCPT) >> 3) & 0x1)
-/* Descriptor Under-Run Interrupt (2) */
-#define DMA_CIS_DUR (0x1 << 2)
-#define DMA_CIS_DUR_GET(val) ((((val) & DMA_CIS_DUR) >> 2) & 0x1)
-/* End of Packet Interrupt (1) */
-#define DMA_CIS_EOP (0x1 << 1)
-#define DMA_CIS_EOP_GET(val) ((((val) & DMA_CIS_EOP) >> 1) & 0x1)
-
-/*******************************************************************************
- * Channel Interrupt Enable Register
- ******************************************************************************/
-
-/* SAI Read Error Interrupt (5) */
-#define DMA_CIE_RDERR (0x1 << 5)
-#define DMA_CIE_RDERR_GET(val) ((((val) & DMA_CIE_RDERR) >> 5) & 0x1)
-/* Channel Off Interrupt (4) */
-#define DMA_CIE_CHOFF (0x1 << 4)
-#define DMA_CIE_CHOFF_GET(val) ((((val) & DMA_CIE_CHOFF) >> 4) & 0x1)
-/* Descriptor Complete Interrupt Enable (3) */
-#define DMA_CIE_DESCPT (0x1 << 3)
-#define DMA_CIE_DESCPT_GET(val) ((((val) & DMA_CIE_DESCPT) >> 3) & 0x1)
-/* Descriptor Under Run Interrupt Enable (2) */
-#define DMA_CIE_DUR (0x1 << 2)
-#define DMA_CIE_DUR_GET(val) ((((val) & DMA_CIE_DUR) >> 2) & 0x1)
-/* End of Packet Interrupt Enable (1) */
-#define DMA_CIE_EOP (0x1 << 1)
-#define DMA_CIE_EOP_GET(val) ((((val) & DMA_CIE_EOP) >> 1) & 0x1)
-
-/*******************************************************************************
- * Port Select Register
- ******************************************************************************/
-
-/* Port Selection (2:0) */
-#define DMA_PS_PS (0x7)
-#define DMA_PS_PS_VAL(val) (((val) & 0x7) << 0)
-#define DMA_PS_PS_GET(val) ((((val) & DMA_PS_PS) >> 0) & 0x7)
-#define DMA_PS_PS_SET(reg,val) (reg) = ((reg & ~DMA_PS_PS) | (((val) & 0x7) << 0))
-
-/*******************************************************************************
- * Port Control Register
- ******************************************************************************/
-
-/* General Purpose Control (16) */
-#define DMA_PCTRL_GPC (0x1 << 16)
-#define DMA_PCTRL_GPC_VAL(val) (((val) & 0x1) << 16)
-#define DMA_PCTRL_GPC_GET(val) ((((val) & DMA_PCTRL_GPC) >> 16) & 0x1)
-#define DMA_PCTRL_GPC_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_GPC) | (((val) & 0x1) << 16))
-/* Port Weight for Transmit Direction (14:12) */
-#define DMA_PCTRL_TXWGT (0x7 << 12)
-#define DMA_PCTRL_TXWGT_VAL(val) (((val) & 0x7) << 12)
-#define DMA_PCTRL_TXWGT_GET(val) ((((val) & DMA_PCTRL_TXWGT) >> 12) & 0x7)
-#define DMA_PCTRL_TXWGT_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_TXWGT) | (((val) & 0x7) << 12))
-/* Endianness for Transmit Direction (11:10) */
-#define DMA_PCTRL_TXENDI (0x3 << 10)
-#define DMA_PCTRL_TXENDI_VAL(val) (((val) & 0x3) << 10)
-#define DMA_PCTRL_TXENDI_GET(val) ((((val) & DMA_PCTRL_TXENDI) >> 10) & 0x3)
-#define DMA_PCTRL_TXENDI_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_TXENDI) | (((val) & 0x3) << 10))
-/* Endianness for Receive Direction (9:8) */
-#define DMA_PCTRL_RXENDI (0x3 << 8)
-#define DMA_PCTRL_RXENDI_VAL(val) (((val) & 0x3) << 8)
-#define DMA_PCTRL_RXENDI_GET(val) ((((val) & DMA_PCTRL_RXENDI) >> 8) & 0x3)
-#define DMA_PCTRL_RXENDI_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_RXENDI) | (((val) & 0x3) << 8))
-/* Packet Drop Enable (6) */
-#define DMA_PCTRL_PDEN (0x1 << 6)
-#define DMA_PCTRL_PDEN_VAL(val) (((val) & 0x1) << 6)
-#define DMA_PCTRL_PDEN_GET(val) ((((val) & DMA_PCTRL_PDEN) >> 6) & 0x1)
-#define DMA_PCTRL_PDEN_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_PDEN) | (((val) & 0x1) << 6))
-/* Burst Length for Transmit Direction (5:4) */
-#define DMA_PCTRL_TXBL (0x3 << 4)
-#define DMA_PCTRL_TXBL_VAL(val) (((val) & 0x3) << 4)
-#define DMA_PCTRL_TXBL_GET(val) ((((val) & DMA_PCTRL_TXBL) >> 4) & 0x3)
-#define DMA_PCTRL_TXBL_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_TXBL) | (((val) & 0x3) << 4))
-/* Burst Length for Receive Direction (3:2) */
-#define DMA_PCTRL_RXBL (0x3 << 2)
-#define DMA_PCTRL_RXBL_VAL(val) (((val) & 0x3) << 2)
-#define DMA_PCTRL_RXBL_GET(val) ((((val) & DMA_PCTRL_RXBL) >> 2) & 0x3)
-#define DMA_PCTRL_RXBL_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_RXBL) | (((val) & 0x3) << 2))
-
-/*******************************************************************************
- * DMA_IRNEN Register
- ******************************************************************************/
-
-/* Channel x Interrupt Request Enable (23) */
-#define DMA_IRNEN_CH23 (0x1 << 23)
-#define DMA_IRNEN_CH23_VAL(val) (((val) & 0x1) << 23)
-#define DMA_IRNEN_CH23_GET(val) ((((val) & DMA_IRNEN_CH23) >> 23) & 0x1)
-#define DMA_IRNEN_CH23_SET(reg,val) (reg) = ((reg & ~DMA_IRNEN_CH23) | (((val) & 0x1) << 23))
-
-/*******************************************************************************
- * DMA_IRNCR Register
- ******************************************************************************/
-
-/* Channel x Interrupt (23) */
-#define DMA_IRNCR_CH23 (0x1 << 23)
-#define DMA_IRNCR_CH23_GET(val) ((((val) & DMA_IRNCR_CH23) >> 23) & 0x1)
-
-/*******************************************************************************
- * DMA_IRNICR Register
- ******************************************************************************/
-
-/* Channel x Interrupt Request (23) */
-#define DMA_IRNICR_CH23 (0x1 << 23)
-#define DMA_IRNICR_CH23_GET(val) ((((val) & DMA_IRNICR_CH23) >> 23) & 0x1)
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ebu_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ebu_reg.h
deleted file mode 100644
index 4e00d01bae..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ebu_reg.h
+++ /dev/null
@@ -1,615 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __EBU_REG_H
-#define __EBU_REG_H
-
-#define ebu_r32(reg) ltq_r32(&ebu->reg)
-#define ebu_w32(val, reg) ltq_w32(val, &ebu->reg)
-#define ebu_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &ebu->reg)
-
-/** EBU register structure */
-struct svip_reg_ebu {
- volatile unsigned long clc; /* 0x0000 */
- volatile unsigned long reserved0; /* 0x04 */
- volatile unsigned long id; /* 0x0008 */
- volatile unsigned long reserved1; /* 0x0c */
- volatile unsigned long con; /* 0x0010 */
- volatile unsigned long reserved2[3]; /* 0x14 */
- volatile unsigned long addr_sel_0; /* 0x0020 */
- volatile unsigned long addr_sel_1; /* 0x0024 */
- volatile unsigned long addr_sel_2; /* 0x0028 */
- volatile unsigned long addr_sel_3; /* 0x002c */
- volatile unsigned long reserved3[12]; /* 0x30 */
- volatile unsigned long con_0; /* 0x0060 */
- volatile unsigned long con_1; /* 0x0064 */
- volatile unsigned long con_2; /* 0x0068 */
- volatile unsigned long con_3; /* 0x006c */
- volatile unsigned long reserved4[4]; /* 0x70 */
- volatile unsigned long emu_addr; /* 0x0080 */
- volatile unsigned long emu_bc; /* 0x0084 */
- volatile unsigned long emu_con; /* 0x0088 */
- volatile unsigned long reserved5; /* 0x8c */
- volatile unsigned long pcc_con; /* 0x0090 */
- volatile unsigned long pcc_stat; /* 0x0094 */
- volatile unsigned long reserved6[2]; /* 0x98 */
- volatile unsigned long pcc_istat; /* 0x00A0 */
- volatile unsigned long pcc_ien; /* 0x00A4 */
- volatile unsigned long pcc_int_out; /* 0x00A8 */
- volatile unsigned long pcc_irs; /* 0x00AC */
- volatile unsigned long nand_con; /* 0x00B0 */
- volatile unsigned long nand_wait; /* 0x00B4 */
- volatile unsigned long nand_ecc0; /* 0x00B8 */
- volatile unsigned long nand_ecc_ac; /* 0x00BC */
-};
-
-/*******************************************************************************
- * EBU
- ******************************************************************************/
-#define LTQ_EBU_CLC ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0000))
-#define LTQ_EBU_ID ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0008))
-#define LTQ_EBU_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0010))
-#define LTQ_EBU_ADDR_SEL_0 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0020))
-#define LTQ_EBU_ADDR_SEL_1 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0024))
-#define LTQ_EBU_ADDR_SEL_2 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0028))
-#define LTQ_EBU_ADDR_SEL_3 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x002c))
-#define LTQ_EBU_CON_0 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0060))
-#define LTQ_EBU_CON_1 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0064))
-#define LTQ_EBU_CON_2 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0068))
-#define LTQ_EBU_CON_3 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x006c))
-#define LTQ_EBU_EMU_BC ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0084))
-#define LTQ_EBU_PCC_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0090))
-#define LTQ_EBU_PCC_STAT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0094))
-#define LTQ_EBU_PCC_ISTAT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00A0))
-#define LTQ_EBU_PCC_IEN ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00A4))
-#define LTQ_EBU_PCC_INT_OUT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00A8))
-#define LTQ_EBU_PCC_IRS ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00AC))
-#define LTQ_EBU_NAND_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00B0))
-#define LTQ_EBU_NAND_WAIT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00B4))
-#define LTQ_EBU_NAND_ECC0 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00B8))
-#define LTQ_EBU_NAND_ECC_AC ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00BC))
-#define LTQ_EBU_EMU_ADDR ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0080))
-#define LTQ_EBU_EMU_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0088))
-
-/*******************************************************************************
- * EBU Clock Control Register
- ******************************************************************************/
-
-/* EBU Disable Status Bit (1) */
-#define LTQ_EBU_CLC_DISS (0x1 << 1)
-#define LTQ_EBU_CLC_DISS_GET(val) ((((val) & LTQ_EBU_CLC_DISS) >> 1) & 0x1)
-/* Used for Enable/disable Control of the EBU (0) */
-#define LTQ_EBU_CLC_DISR (0x1)
-#define LTQ_EBU_CLC_DISR_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_EBU_CLC_DISR_GET(val) ((((val) & LTQ_EBU_CLC_DISR) >> 0) & 0x1)
-#define LTQ_EBU_CLC_DISR_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CLC_DISR) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * EBU Identification Register (Internal)
- ******************************************************************************/
-
-/* Module Number (31:8) */
-#define LTQ_EBU_ID_MODNUM (0xffffff << 8)
-#define LTQ_EBU_ID_MODNUM_GET(val) ((((val) & LTQ_EBU_ID_MODNUM) >> 8) & 0xffffff)
-/* Revision Number (7:0) */
-#define LTQ_EBU_ID_REVNUM (0xff)
-#define LTQ_EBU_ID_REVNUM_GET(val) ((((val) & LTQ_EBU_ID_REVNUM) >> 0) & 0xff)
-
-/*******************************************************************************
- * External Bus Unit Control Register
- ******************************************************************************/
-
-/* Driver Turn-Around Control, Chip Select Triggered (22:20) */
-#define LTQ_EBU_CON_DTACS (0x7 << 20)
-#define LTQ_EBU_CON_DTACS_VAL(val) (((val) & 0x7) << 20)
-#define LTQ_EBU_CON_DTACS_GET(val) ((((val) & LTQ_EBU_CON_DTACS) >> 20) & 0x7)
-#define LTQ_EBU_CON_DTACS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_DTACS) | (((val) & 0x7) << 20))
-/* Driver Turn-Around Control, Read-write Triggered (18:16) */
-#define LTQ_EBU_CON_DTARW (0x7 << 16)
-#define LTQ_EBU_CON_DTARW_VAL(val) (((val) & 0x7) << 16)
-#define LTQ_EBU_CON_DTARW_GET(val) ((((val) & LTQ_EBU_CON_DTARW) >> 16) & 0x7)
-#define LTQ_EBU_CON_DTARW_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_DTARW) | (((val) & 0x7) << 16))
-/* Time-Out Control (15:8) */
-#define LTQ_EBU_CON_TOUTC (0xff << 8)
-#define LTQ_EBU_CON_TOUTC_VAL(val) (((val) & 0xff) << 8)
-#define LTQ_EBU_CON_TOUTC_GET(val) ((((val) & LTQ_EBU_CON_TOUTC) >> 8) & 0xff)
-#define LTQ_EBU_CON_TOUTC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_TOUTC) | (((val) & 0xff) << 8))
-/* Arbitration Mode (7:6) */
-#define LTQ_EBU_CON_ARBMODE (0x3 << 6)
-#define LTQ_EBU_CON_ARBMODE_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_EBU_CON_ARBMODE_GET(val) ((((val) & LTQ_EBU_CON_ARBMODE) >> 6) & 0x3)
-#define LTQ_EBU_CON_ARBMODE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_ARBMODE) | (((val) & 0x3) << 6))
-/* Arbitration Synchronization (5) */
-#define LTQ_EBU_CON_ARBSYNC (0x1 << 5)
-#define LTQ_EBU_CON_ARBSYNC_VAL(val) (((val) & 0x1) << 5)
-#define LTQ_EBU_CON_ARBSYNC_GET(val) ((((val) & LTQ_EBU_CON_ARBSYNC) >> 5) & 0x1)
-#define LTQ_EBU_CON_ARBSYNC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_ARBSYNC) | (((val) & 0x1) << 5))
-
-/*******************************************************************************
- * Address Select Registers
- ******************************************************************************/
-
-/* Memory Region Base Address (31:12) */
-#define LTQ_EBU_ADDR_SEL_0_BASE (0xfffff << 12)
-#define LTQ_EBU_ADDR_SEL_0_BASE_VAL(val) (((val) & 0xfffff) << 12)
-#define LTQ_EBU_ADDR_SEL_0_BASE_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_BASE) >> 12) & 0xfffff)
-#define LTQ_EBU_ADDR_SEL_0_BASE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_BASE) | (((val) & 0xfffff) << 12))
-/* Memory Region Address Mask (7:4) */
-#define LTQ_EBU_ADDR_SEL_0_MASK (0xf << 4)
-#define LTQ_EBU_ADDR_SEL_0_MASK_VAL(val) (((val) & 0xf) << 4)
-#define LTQ_EBU_ADDR_SEL_0_MASK_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_MASK) >> 4) & 0xf)
-#define LTQ_EBU_ADDR_SEL_0_MASK_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_MASK) | (((val) & 0xf) << 4))
-/* Memory Region Mirror Enable Control (1) */
-#define LTQ_EBU_ADDR_SEL_0_MRME (0x1 << 1)
-#define LTQ_EBU_ADDR_SEL_0_MRME_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_EBU_ADDR_SEL_0_MRME_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_MRME) >> 1) & 0x1)
-#define LTQ_EBU_ADDR_SEL_0_MRME_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_MRME) | (((val) & 0x1) << 1))
-/* Memory Region Enable Control (0) */
-#define LTQ_EBU_ADDR_SEL_0_REGEN (0x1)
-#define LTQ_EBU_ADDR_SEL_0_REGEN_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_EBU_ADDR_SEL_0_REGEN_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_REGEN) >> 0) & 0x1)
-#define LTQ_EBU_ADDR_SEL_0_REGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_REGEN) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Bus Configuration Registers
- ******************************************************************************/
-
-/* Memory Region Write Protection (31) */
-#define LTQ_EBU_CON_0_WRDIS (0x1 << 31)
-#define LTQ_EBU_CON_0_WRDIS_VAL(val) (((val) & 0x1) << 31)
-#define LTQ_EBU_CON_0_WRDIS_GET(val) ((((val) & LTQ_EBU_CON_0_WRDIS) >> 31) & 0x1)
-#define LTQ_EBU_CON_0_WRDIS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WRDIS) | (((val) & 0x1) << 31))
-/* Address Swapping (30) */
-#define LTQ_EBU_CON_0_ADSWP (0x1 << 30)
-#define LTQ_EBU_CON_0_ADSWP_VAL(val) (((val) & 0x1) << 30)
-#define LTQ_EBU_CON_0_ADSWP_GET(val) ((((val) & LTQ_EBU_CON_0_ADSWP) >> 30) & 0x1)
-#define LTQ_EBU_CON_0_ADSWP_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_ADSWP) | (((val) & 0x1) << 30))
-/* Address Generation Control (26:24) */
-#define LTQ_EBU_CON_0_AGEN (0x7 << 24)
-#define LTQ_EBU_CON_0_AGEN_VAL(val) (((val) & 0x7) << 24)
-#define LTQ_EBU_CON_0_AGEN_GET(val) ((((val) & LTQ_EBU_CON_0_AGEN) >> 24) & 0x7)
-#define LTQ_EBU_CON_0_AGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_AGEN) | (((val) & 0x7) << 24))
-/* Extended Address Setup Control (22) */
-#define LTQ_EBU_CON_0_SETUP (0x1 << 22)
-#define LTQ_EBU_CON_0_SETUP_VAL(val) (((val) & 0x1) << 22)
-#define LTQ_EBU_CON_0_SETUP_GET(val) ((((val) & LTQ_EBU_CON_0_SETUP) >> 22) & 0x1)
-#define LTQ_EBU_CON_0_SETUP_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_SETUP) | (((val) & 0x1) << 22))
-/* Variable Wait-State Insertion Control (21:20) */
-#define LTQ_EBU_CON_0_WAIT (0x3 << 20)
-#define LTQ_EBU_CON_0_WAIT_VAL(val) (((val) & 0x3) << 20)
-#define LTQ_EBU_CON_0_WAIT_GET(val) ((((val) & LTQ_EBU_CON_0_WAIT) >> 20) & 0x3)
-#define LTQ_EBU_CON_0_WAIT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WAIT) | (((val) & 0x3) << 20))
-/* Active WAIT Level Control (19) */
-#define LTQ_EBU_CON_0_WINV (0x1 << 19)
-#define LTQ_EBU_CON_0_WINV_VAL(val) (((val) & 0x1) << 19)
-#define LTQ_EBU_CON_0_WINV_GET(val) ((((val) & LTQ_EBU_CON_0_WINV) >> 19) & 0x1)
-#define LTQ_EBU_CON_0_WINV_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WINV) | (((val) & 0x1) << 19))
-/* External Device Data Width Control (17:16) */
-#define LTQ_EBU_CON_0_PW (0x3 << 16)
-#define LTQ_EBU_CON_0_PW_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_EBU_CON_0_PW_GET(val) ((((val) & LTQ_EBU_CON_0_PW) >> 16) & 0x3)
-#define LTQ_EBU_CON_0_PW_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_PW) | (((val) & 0x3) << 16))
-/* Address Latch Enable ALE Duration Control (15:14) */
-#define LTQ_EBU_CON_0_ALEC (0x3 << 14)
-#define LTQ_EBU_CON_0_ALEC_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_EBU_CON_0_ALEC_GET(val) ((((val) & LTQ_EBU_CON_0_ALEC) >> 14) & 0x3)
-#define LTQ_EBU_CON_0_ALEC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_ALEC) | (((val) & 0x3) << 14))
-/* Byte Control Signal Timing Mode Control (13:12) */
-#define LTQ_EBU_CON_0_BCGEN (0x3 << 12)
-#define LTQ_EBU_CON_0_BCGEN_VAL(val) (((val) & 0x3) << 12)
-#define LTQ_EBU_CON_0_BCGEN_GET(val) ((((val) & LTQ_EBU_CON_0_BCGEN) >> 12) & 0x3)
-#define LTQ_EBU_CON_0_BCGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_BCGEN) | (((val) & 0x3) << 12))
-/* Write Access Wait-State Control (10:8) */
-#define LTQ_EBU_CON_0_WAITWRC (0x7 << 8)
-#define LTQ_EBU_CON_0_WAITWRC_VAL(val) (((val) & 0x7) << 8)
-#define LTQ_EBU_CON_0_WAITWRC_GET(val) ((((val) & LTQ_EBU_CON_0_WAITWRC) >> 8) & 0x7)
-#define LTQ_EBU_CON_0_WAITWRC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WAITWRC) | (((val) & 0x7) << 8))
-/* Read Access Wait-State Control (7:6) */
-#define LTQ_EBU_CON_0_WAITRDC (0x3 << 6)
-#define LTQ_EBU_CON_0_WAITRDC_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_EBU_CON_0_WAITRDC_GET(val) ((((val) & LTQ_EBU_CON_0_WAITRDC) >> 6) & 0x3)
-#define LTQ_EBU_CON_0_WAITRDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WAITRDC) | (((val) & 0x3) << 6))
-/* Hold/Pause Cycle Control (5:4) */
-#define LTQ_EBU_CON_0_HOLDC (0x3 << 4)
-#define LTQ_EBU_CON_0_HOLDC_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_EBU_CON_0_HOLDC_GET(val) ((((val) & LTQ_EBU_CON_0_HOLDC) >> 4) & 0x3)
-#define LTQ_EBU_CON_0_HOLDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_HOLDC) | (((val) & 0x3) << 4))
-/* Recovery Cycle Control (3:2) */
-#define LTQ_EBU_CON_0_RECOVC (0x3 << 2)
-#define LTQ_EBU_CON_0_RECOVC_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_EBU_CON_0_RECOVC_GET(val) ((((val) & LTQ_EBU_CON_0_RECOVC) >> 2) & 0x3)
-#define LTQ_EBU_CON_0_RECOVC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_RECOVC) | (((val) & 0x3) << 2))
-/* Wait Cycle Multiplier Control (1:0) */
-#define LTQ_EBU_CON_0_CMULT (0x3)
-#define LTQ_EBU_CON_0_CMULT_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_EBU_CON_0_CMULT_GET(val) ((((val) & LTQ_EBU_CON_0_CMULT) >> 0) & 0x3)
-#define LTQ_EBU_CON_0_CMULT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_CMULT) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * External Bus Unit Emulator Bus Configuration Register
- ******************************************************************************/
-
-/* Write Protection (31) */
-#define LTQ_EBU_EMU_BC_WRITE (0x1 << 31)
-#define LTQ_EBU_EMU_BC_WRITE_VAL(val) (((val) & 0x1) << 31)
-#define LTQ_EBU_EMU_BC_WRITE_GET(val) ((((val) & LTQ_EBU_EMU_BC_WRITE) >> 31) & 0x1)
-#define LTQ_EBU_EMU_BC_WRITE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WRITE) | (((val) & 0x1) << 31))
-/* Address Generation Control (26:24) */
-#define LTQ_EBU_EMU_BC_AGEN (0x7 << 24)
-#define LTQ_EBU_EMU_BC_AGEN_VAL(val) (((val) & 0x7) << 24)
-#define LTQ_EBU_EMU_BC_AGEN_GET(val) ((((val) & LTQ_EBU_EMU_BC_AGEN) >> 24) & 0x7)
-#define LTQ_EBU_EMU_BC_AGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_AGEN) | (((val) & 0x7) << 24))
-/* Extended Address Setup Control (22) */
-#define LTQ_EBU_EMU_BC_SETUP (0x1 << 22)
-#define LTQ_EBU_EMU_BC_SETUP_VAL(val) (((val) & 0x1) << 22)
-#define LTQ_EBU_EMU_BC_SETUP_GET(val) ((((val) & LTQ_EBU_EMU_BC_SETUP) >> 22) & 0x1)
-#define LTQ_EBU_EMU_BC_SETUP_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_SETUP) | (((val) & 0x1) << 22))
-/* Variable Waitstate Insertion Control (21:20) */
-#define LTQ_EBU_EMU_BC_WAIT (0x3 << 20)
-#define LTQ_EBU_EMU_BC_WAIT_VAL(val) (((val) & 0x3) << 20)
-#define LTQ_EBU_EMU_BC_WAIT_GET(val) ((((val) & LTQ_EBU_EMU_BC_WAIT) >> 20) & 0x3)
-#define LTQ_EBU_EMU_BC_WAIT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WAIT) | (((val) & 0x3) << 20))
-/* Active WAIT Level Control (19) */
-#define LTQ_EBU_EMU_BC_WINV (0x1 << 19)
-#define LTQ_EBU_EMU_BC_WINV_VAL(val) (((val) & 0x1) << 19)
-#define LTQ_EBU_EMU_BC_WINV_GET(val) ((((val) & LTQ_EBU_EMU_BC_WINV) >> 19) & 0x1)
-#define LTQ_EBU_EMU_BC_WINV_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WINV) | (((val) & 0x1) << 19))
-/* External Device Data Width Control (17:16) */
-#define LTQ_EBU_EMU_BC_PORTW (0x3 << 16)
-#define LTQ_EBU_EMU_BC_PORTW_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_EBU_EMU_BC_PORTW_GET(val) ((((val) & LTQ_EBU_EMU_BC_PORTW) >> 16) & 0x3)
-#define LTQ_EBU_EMU_BC_PORTW_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_PORTW) | (((val) & 0x3) << 16))
-/* Address Latch Enable Function (15:14) */
-#define LTQ_EBU_EMU_BC_ALEC (0x3 << 14)
-#define LTQ_EBU_EMU_BC_ALEC_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_EBU_EMU_BC_ALEC_GET(val) ((((val) & LTQ_EBU_EMU_BC_ALEC) >> 14) & 0x3)
-#define LTQ_EBU_EMU_BC_ALEC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_ALEC) | (((val) & 0x3) << 14))
-/* Byte Control Signal Timing Mode (13:12) */
-#define LTQ_EBU_EMU_BC_BCGEN (0x3 << 12)
-#define LTQ_EBU_EMU_BC_BCGEN_VAL(val) (((val) & 0x3) << 12)
-#define LTQ_EBU_EMU_BC_BCGEN_GET(val) ((((val) & LTQ_EBU_EMU_BC_BCGEN) >> 12) & 0x3)
-#define LTQ_EBU_EMU_BC_BCGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_BCGEN) | (((val) & 0x3) << 12))
-/* Write Access Waitstate Control (10:8) */
-#define LTQ_EBU_EMU_BC_WAITWRC (0x7 << 8)
-#define LTQ_EBU_EMU_BC_WAITWRC_VAL(val) (((val) & 0x7) << 8)
-#define LTQ_EBU_EMU_BC_WAITWRC_GET(val) ((((val) & LTQ_EBU_EMU_BC_WAITWRC) >> 8) & 0x7)
-#define LTQ_EBU_EMU_BC_WAITWRC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WAITWRC) | (((val) & 0x7) << 8))
-/* Read Access Waitstate Control (7:6) */
-#define LTQ_EBU_EMU_BC_WAITRDC (0x3 << 6)
-#define LTQ_EBU_EMU_BC_WAITRDC_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_EBU_EMU_BC_WAITRDC_GET(val) ((((val) & LTQ_EBU_EMU_BC_WAITRDC) >> 6) & 0x3)
-#define LTQ_EBU_EMU_BC_WAITRDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WAITRDC) | (((val) & 0x3) << 6))
-/* Hold/Pause Cycle Control (5:4) */
-#define LTQ_EBU_EMU_BC_HOLDC (0x3 << 4)
-#define LTQ_EBU_EMU_BC_HOLDC_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_EBU_EMU_BC_HOLDC_GET(val) ((((val) & LTQ_EBU_EMU_BC_HOLDC) >> 4) & 0x3)
-#define LTQ_EBU_EMU_BC_HOLDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_HOLDC) | (((val) & 0x3) << 4))
-/* Recovery Cycles Control (3:2) */
-#define LTQ_EBU_EMU_BC_RECOVC (0x3 << 2)
-#define LTQ_EBU_EMU_BC_RECOVC_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_EBU_EMU_BC_RECOVC_GET(val) ((((val) & LTQ_EBU_EMU_BC_RECOVC) >> 2) & 0x3)
-#define LTQ_EBU_EMU_BC_RECOVC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_RECOVC) | (((val) & 0x3) << 2))
-/* Cycle Multiplier Control (1:0) */
-#define LTQ_EBU_EMU_BC_CMULT (0x3)
-#define LTQ_EBU_EMU_BC_CMULT_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_EBU_EMU_BC_CMULT_GET(val) ((((val) & LTQ_EBU_EMU_BC_CMULT) >> 0) & 0x3)
-#define LTQ_EBU_EMU_BC_CMULT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_CMULT) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * PC-Card Control Register
- ******************************************************************************/
-
-/* External Interrupt Input IREQ (3:1) */
-#define LTQ_EBU_PCC_CON_IREQ (0x7 << 1)
-#define LTQ_EBU_PCC_CON_IREQ_VAL(val) (((val) & 0x7) << 1)
-#define LTQ_EBU_PCC_CON_IREQ_GET(val) ((((val) & LTQ_EBU_PCC_CON_IREQ) >> 1) & 0x7)
-#define LTQ_EBU_PCC_CON_IREQ_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_CON_IREQ) | (((val) & 0x7) << 1))
-/* PC Card ON (0) */
-#define LTQ_EBU_PCC_CON_ON (0x1)
-#define LTQ_EBU_PCC_CON_ON_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_EBU_PCC_CON_ON_GET(val) ((((val) & LTQ_EBU_PCC_CON_ON) >> 0) & 0x1)
-#define LTQ_EBU_PCC_CON_ON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_CON_ON) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * PCC Status Register
- ******************************************************************************/
-
-/* Interrupt Request (6) */
-#define LTQ_EBU_PCC_STAT_IRQ (0x1 << 6)
-#define LTQ_EBU_PCC_STAT_IRQ_GET(val) ((((val) & LTQ_EBU_PCC_STAT_IRQ) >> 6) & 0x1)
-/* PC-Card Overcurrent (5) */
-#define LTQ_EBU_PCC_STAT_OC (0x1 << 5)
-#define LTQ_EBU_PCC_STAT_OC_GET(val) ((((val) & LTQ_EBU_PCC_STAT_OC) >> 5) & 0x1)
-/* PC-Card Socket Power On (4) */
-#define LTQ_EBU_PCC_STAT_SPON (0x1 << 4)
-#define LTQ_EBU_PCC_STAT_SPON_GET(val) ((((val) & LTQ_EBU_PCC_STAT_SPON) >> 4) & 0x1)
-/* Card Detect Status (1:0) */
-#define LTQ_EBU_PCC_STAT_CD (0x3)
-#define LTQ_EBU_PCC_STAT_CD_GET(val) ((((val) & LTQ_EBU_PCC_STAT_CD) >> 0) & 0x3)
-
-/*******************************************************************************
- * PCC Interrupt Status Register
- ******************************************************************************/
-
-/* Interrupt Request Active Interrupt (4) */
-#define LTQ_EBU_PCC_ISTAT_IREQ (0x1 << 4)
-#define LTQ_EBU_PCC_ISTAT_IREQ_VAL(val) (((val) & 0x1) << 4)
-#define LTQ_EBU_PCC_ISTAT_IREQ_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_IREQ) >> 4) & 0x1)
-#define LTQ_EBU_PCC_ISTAT_IREQ_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_IREQ) | (((val) & 0x1) << 4))
-/* Over Current Status Change Interrupt (3) */
-#define LTQ_EBU_PCC_ISTAT_OC (0x1 << 3)
-#define LTQ_EBU_PCC_ISTAT_OC_VAL(val) (((val) & 0x1) << 3)
-#define LTQ_EBU_PCC_ISTAT_OC_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_OC) >> 3) & 0x1)
-#define LTQ_EBU_PCC_ISTAT_OC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_OC) | (((val) & 0x1) << 3))
-/* Socket Power on Status Change Interrupt (2) */
-#define LTQ_EBU_PCC_ISTAT_SPON (0x1 << 2)
-#define LTQ_EBU_PCC_ISTAT_SPON_VAL(val) (((val) & 0x1) << 2)
-#define LTQ_EBU_PCC_ISTAT_SPON_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_SPON) >> 2) & 0x1)
-#define LTQ_EBU_PCC_ISTAT_SPON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_SPON) | (((val) & 0x1) << 2))
-/* Voltage Sense Status Change Interrupt (1) */
-#define LTQ_EBU_PCC_ISTAT_VS (0x1 << 1)
-#define LTQ_EBU_PCC_ISTAT_VS_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_EBU_PCC_ISTAT_VS_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_VS) >> 1) & 0x1)
-#define LTQ_EBU_PCC_ISTAT_VS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_VS) | (((val) & 0x1) << 1))
-/* Card Detect Status Change Interrupt (0) */
-#define LTQ_EBU_PCC_ISTAT_CD (0x1)
-#define LTQ_EBU_PCC_ISTAT_CD_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_EBU_PCC_ISTAT_CD_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_CD) >> 0) & 0x1)
-#define LTQ_EBU_PCC_ISTAT_CD_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_CD) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * PCC Interrupt Enable Register
- ******************************************************************************/
-
-/* Enable of Interrupt Request IR (4) */
-#define LTQ_EBU_PCC_IEN_IR (0x1 << 4)
-#define LTQ_EBU_PCC_IEN_IR_VAL(val) (((val) & 0x1) << 4)
-#define LTQ_EBU_PCC_IEN_IR_GET(val) ((((val) & LTQ_EBU_PCC_IEN_IR) >> 4) & 0x1)
-#define LTQ_EBU_PCC_IEN_IR_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_IR) | (((val) & 0x1) << 4))
-/* Enable of Interrupt Request OC event (3) */
-#define LTQ_EBU_PCC_IEN_OC (0x1 << 3)
-#define LTQ_EBU_PCC_IEN_OC_VAL(val) (((val) & 0x1) << 3)
-#define LTQ_EBU_PCC_IEN_OC_GET(val) ((((val) & LTQ_EBU_PCC_IEN_OC) >> 3) & 0x1)
-#define LTQ_EBU_PCC_IEN_OC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_OC) | (((val) & 0x1) << 3))
-/* Enable of Interrupt Request Socket Power On (2) */
-#define LTQ_EBU_PCC_IEN_PWRON (0x1 << 2)
-#define LTQ_EBU_PCC_IEN_PWRON_VAL(val) (((val) & 0x1) << 2)
-#define LTQ_EBU_PCC_IEN_PWRON_GET(val) ((((val) & LTQ_EBU_PCC_IEN_PWRON) >> 2) & 0x1)
-#define LTQ_EBU_PCC_IEN_PWRON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_PWRON) | (((val) & 0x1) << 2))
-/* Enable of Interrupt Request Voltage Sense (1) */
-#define LTQ_EBU_PCC_IEN_VS (0x1 << 1)
-#define LTQ_EBU_PCC_IEN_VS_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_EBU_PCC_IEN_VS_GET(val) ((((val) & LTQ_EBU_PCC_IEN_VS) >> 1) & 0x1)
-#define LTQ_EBU_PCC_IEN_VS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_VS) | (((val) & 0x1) << 1))
-/* Enable of Interrupt Request Card Detect (0) */
-#define LTQ_EBU_PCC_IEN_CD (0x1)
-#define LTQ_EBU_PCC_IEN_CD_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_EBU_PCC_IEN_CD_GET(val) ((((val) & LTQ_EBU_PCC_IEN_CD) >> 0) & 0x1)
-#define LTQ_EBU_PCC_IEN_CD_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_CD) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * PCC Interrupt Output Status Register
- ******************************************************************************/
-
-/* Status of Interrupt Request IR (4) */
-#define LTQ_EBU_PCC_INT_OUT_IR (0x1 << 4)
-#define LTQ_EBU_PCC_INT_OUT_IR_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_IR) >> 4) & 0x1)
-/* Status of Interrupt Request OC (3) */
-#define LTQ_EBU_PCC_INT_OUT_OC (0x1 << 3)
-#define LTQ_EBU_PCC_INT_OUT_OC_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_OC) >> 3) & 0x1)
-/* Status of Interrupt Request Socket Power On (2) */
-#define LTQ_EBU_PCC_INT_OUT_PWRON (0x1 << 2)
-#define LTQ_EBU_PCC_INT_OUT_PWRON_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_PWRON) >> 2) & 0x1)
-/* Status of Interrupt Request Voltage Sense (1) */
-#define LTQ_EBU_PCC_INT_OUT_VS (0x1 << 1)
-#define LTQ_EBU_PCC_INT_OUT_VS_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_VS) >> 1) & 0x1)
-/* Status of Interrupt Request Card Detect (0) */
-#define LTQ_EBU_PCC_INT_OUT_CD (0x1)
-#define LTQ_EBU_PCC_INT_OUT_CD_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_CD) >> 0) & 0x1)
-
-/*******************************************************************************
- * PCC Interrupt Request Set Register
- ******************************************************************************/
-
-/* Set Interrupt Request IR (4) */
-#define LTQ_EBU_PCC_IRS_IR (0x1 << 4)
-#define LTQ_EBU_PCC_IRS_IR_VAL(val) (((val) & 0x1) << 4)
-#define LTQ_EBU_PCC_IRS_IR_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_IR) | (val) & 1) << 4)
-/* Set Interrupt Request OC (3) */
-#define LTQ_EBU_PCC_IRS_OC (0x1 << 3)
-#define LTQ_EBU_PCC_IRS_OC_VAL(val) (((val) & 0x1) << 3)
-#define LTQ_EBU_PCC_IRS_OC_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_OC) | (val) & 1) << 3)
-/* Set Interrupt Request Socket Power On (2) */
-#define LTQ_EBU_PCC_IRS_PWRON (0x1 << 2)
-#define LTQ_EBU_PCC_IRS_PWRON_VAL(val) (((val) & 0x1) << 2)
-#define LTQ_EBU_PCC_IRS_PWRON_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_PWRON) | (val) & 1) << 2)
-/* Set Interrupt Request Voltage Sense (1) */
-#define LTQ_EBU_PCC_IRS_VS (0x1 << 1)
-#define LTQ_EBU_PCC_IRS_VS_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_EBU_PCC_IRS_VS_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_VS) | (val) & 1) << 1)
-/* Set Interrupt Request Card Detect (0) */
-#define LTQ_EBU_PCC_IRS_CD (0x1)
-#define LTQ_EBU_PCC_IRS_CD_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_EBU_PCC_IRS_CD_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_CD) | (val) & 1) << 0)
-
-/*******************************************************************************
- * NAND Flash Control Register
- ******************************************************************************/
-
-/* ECC Enabling (31) */
-#define LTQ_EBU_NAND_CON_ECC_ON (0x1 << 31)
-#define LTQ_EBU_NAND_CON_ECC_ON_VAL(val) (((val) & 0x1) << 31)
-#define LTQ_EBU_NAND_CON_ECC_ON_GET(val) ((((val) & LTQ_EBU_NAND_CON_ECC_ON) >> 31) & 0x1)
-#define LTQ_EBU_NAND_CON_ECC_ON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_ECC_ON) | (((val) & 0x1) << 31))
-/* Latch enable (23:18) */
-#define LTQ_EBU_NAND_CON_LAT_EN (0x3f << 18)
-#define LTQ_EBU_NAND_CON_LAT_EN_VAL(val) (((val) & 0x3f) << 18)
-#define LTQ_EBU_NAND_CON_LAT_EN_GET(val) ((((val) & LTQ_EBU_NAND_CON_LAT_EN) >> 18) & 0x3f)
-#define LTQ_EBU_NAND_CON_LAT_EN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_LAT_EN) | (((val) & 0x3f) << 18))
-/* Output ChipSelect# Selection (11:10) */
-#define LTQ_EBU_NAND_CON_OUT_CS_S (0x3 << 10)
-#define LTQ_EBU_NAND_CON_OUT_CS_S_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_EBU_NAND_CON_OUT_CS_S_GET(val) ((((val) & LTQ_EBU_NAND_CON_OUT_CS_S) >> 10) & 0x3)
-#define LTQ_EBU_NAND_CON_OUT_CS_S_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_OUT_CS_S) | (((val) & 0x3) << 10))
-/* Input ChipSelect# Selection (9:8) */
-#define LTQ_EBU_NAND_CON_IN_CS_S (0x3 << 8)
-#define LTQ_EBU_NAND_CON_IN_CS_S_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_EBU_NAND_CON_IN_CS_S_GET(val) ((((val) & LTQ_EBU_NAND_CON_IN_CS_S) >> 8) & 0x3)
-#define LTQ_EBU_NAND_CON_IN_CS_S_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_IN_CS_S) | (((val) & 0x3) << 8))
-/* Set PRE (7) */
-#define LTQ_EBU_NAND_CON_PRE_P (0x1 << 7)
-#define LTQ_EBU_NAND_CON_PRE_P_VAL(val) (((val) & 0x1) << 7)
-#define LTQ_EBU_NAND_CON_PRE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_PRE_P) >> 7) & 0x1)
-#define LTQ_EBU_NAND_CON_PRE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_PRE_P) | (((val) & 0x1) << 7))
-/* Set WP Active Polarity (6) */
-#define LTQ_EBU_NAND_CON_WP_P (0x1 << 6)
-#define LTQ_EBU_NAND_CON_WP_P_VAL(val) (((val) & 0x1) << 6)
-#define LTQ_EBU_NAND_CON_WP_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_WP_P) >> 6) & 0x1)
-#define LTQ_EBU_NAND_CON_WP_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_WP_P) | (((val) & 0x1) << 6))
-/* Set SE Active Polarity (5) */
-#define LTQ_EBU_NAND_CON_SE_P (0x1 << 5)
-#define LTQ_EBU_NAND_CON_SE_P_VAL(val) (((val) & 0x1) << 5)
-#define LTQ_EBU_NAND_CON_SE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_SE_P) >> 5) & 0x1)
-#define LTQ_EBU_NAND_CON_SE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_SE_P) | (((val) & 0x1) << 5))
-/* Set CS Active Polarity (4) */
-#define LTQ_EBU_NAND_CON_CS_P (0x1 << 4)
-#define LTQ_EBU_NAND_CON_CS_P_VAL(val) (((val) & 0x1) << 4)
-#define LTQ_EBU_NAND_CON_CS_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_CS_P) >> 4) & 0x1)
-#define LTQ_EBU_NAND_CON_CS_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_CS_P) | (((val) & 0x1) << 4))
-/* Set CLE Active Polarity (3) */
-#define LTQ_EBU_NAND_CON_CLE_P (0x1 << 3)
-#define LTQ_EBU_NAND_CON_CLE_P_VAL(val) (((val) & 0x1) << 3)
-#define LTQ_EBU_NAND_CON_CLE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_CLE_P) >> 3) & 0x1)
-#define LTQ_EBU_NAND_CON_CLE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_CLE_P) | (((val) & 0x1) << 3))
-/* Set ALE Active Polarity (2) */
-#define LTQ_EBU_NAND_CON_ALE_P (0x1 << 2)
-#define LTQ_EBU_NAND_CON_ALE_P_VAL(val) (((val) & 0x1) << 2)
-#define LTQ_EBU_NAND_CON_ALE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_ALE_P) >> 2) & 0x1)
-#define LTQ_EBU_NAND_CON_ALE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_ALE_P) | (((val) & 0x1) << 2))
-/* NAND CS Mux with EBU CS Enable (1) */
-#define LTQ_EBU_NAND_CON_CSMUX_E (0x1 << 1)
-#define LTQ_EBU_NAND_CON_CSMUX_E_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_EBU_NAND_CON_CSMUX_E_GET(val) ((((val) & LTQ_EBU_NAND_CON_CSMUX_E) >> 1) & 0x1)
-#define LTQ_EBU_NAND_CON_CSMUX_E_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_CSMUX_E) | (((val) & 0x1) << 1))
-/* NAND FLASH Mode Support (0) */
-#define LTQ_EBU_NAND_CON_NANDMODE (0x1)
-#define LTQ_EBU_NAND_CON_NANDMODE_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_EBU_NAND_CON_NANDMODE_GET(val) ((((val) & LTQ_EBU_NAND_CON_NANDMODE) >> 0) & 0x1)
-#define LTQ_EBU_NAND_CON_NANDMODE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_NANDMODE) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * NAND Flash State Register
- ******************************************************************************/
-
-/* Reserved (31:3) */
-#define LTQ_EBU_NAND_WAIT_RES (0x1fffffff << 3)
-#define LTQ_EBU_NAND_WAIT_RES_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_RES) >> 3) & 0x1fffffff)
-/* NAND Write Complete (3) */
-#define LTQ_EBU_NAND_WAIT_WR_C (0x1 << 3)
-#define LTQ_EBU_NAND_WAIT_WR_C_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_WR_C) >> 3) & 0x1)
-/* Record the RD Edge (rising ) (2) */
-#define LTQ_EBU_NAND_WAIT_RD_EDGE (0x1 << 2)
-#define LTQ_EBU_NAND_WAIT_RD_EDGE_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_RD_EDGE) >> 2) & 0x1)
-/* Record the BY# Edge (falling) (1) */
-#define LTQ_EBU_NAND_WAIT_BY_EDGE (0x1 << 1)
-#define LTQ_EBU_NAND_WAIT_BY_EDGE_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_BY_EDGE) >> 1) & 0x1)
-/* Rd/BY# value (0) */
-#define LTQ_EBU_NAND_WAIT_RDBY_VALUE (0x1)
-#define LTQ_EBU_NAND_WAIT_RDBY_VALUE_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_RDBY_VALUE) >> 0) & 0x1)
-
-/*******************************************************************************
- * NAND ECC Result Register 0
- ******************************************************************************/
-
-/* Reserved (31:24) */
-#define LTQ_EBU_NAND_ECC0_RES (0xff << 24)
-#define LTQ_EBU_NAND_ECC0_RES_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_RES) >> 24) & 0xff)
-/* ECC value (23:16) */
-#define LTQ_EBU_NAND_ECC0_ECC_B2 (0xff << 16)
-#define LTQ_EBU_NAND_ECC0_ECC_B2_VAL(val) (((val) & 0xff) << 16)
-#define LTQ_EBU_NAND_ECC0_ECC_B2_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_ECC_B2) >> 16) & 0xff)
-#define LTQ_EBU_NAND_ECC0_ECC_B2_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC0_ECC_B2) | (((val) & 0xff) << 16))
-/* ECC value (15:8) */
-#define LTQ_EBU_NAND_ECC0_ECC_B1 (0xff << 8)
-#define LTQ_EBU_NAND_ECC0_ECC_B1_VAL(val) (((val) & 0xff) << 8)
-#define LTQ_EBU_NAND_ECC0_ECC_B1_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_ECC_B1) >> 8) & 0xff)
-#define LTQ_EBU_NAND_ECC0_ECC_B1_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC0_ECC_B1) | (((val) & 0xff) << 8))
-/* ECC value (7:0) */
-#define LTQ_EBU_NAND_ECC0_ECC_B0 (0xff)
-#define LTQ_EBU_NAND_ECC0_ECC_B0_VAL(val) (((val) & 0xff) << 0)
-#define LTQ_EBU_NAND_ECC0_ECC_B0_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_ECC_B0) >> 0) & 0xff)
-#define LTQ_EBU_NAND_ECC0_ECC_B0_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC0_ECC_B0) | (((val) & 0xff) << 0))
-
-/*******************************************************************************
- * NAND ECC Address Counter Register
- ******************************************************************************/
-
-/* Reserved (31:9) */
-#define LTQ_EBU_NAND_ECC_AC_RES (0x7fffff << 9)
-#define LTQ_EBU_NAND_ECC_AC_RES_GET(val) ((((val) & LTQ_EBU_NAND_ECC_AC_RES) >> 9) & 0x7fffff)
-/* ECC address counter (8:0) */
-#define LTQ_EBU_NAND_ECC_AC_ECC_AC (0x1ff)
-#define LTQ_EBU_NAND_ECC_AC_ECC_AC_VAL(val) (((val) & 0x1ff) << 0)
-#define LTQ_EBU_NAND_ECC_AC_ECC_AC_GET(val) ((((val) & LTQ_EBU_NAND_ECC_AC_ECC_AC) >> 0) & 0x1ff)
-#define LTQ_EBU_NAND_ECC_AC_ECC_AC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC_AC_ECC_AC) | (((val) & 0x1ff) << 0))
-
-/*******************************************************************************
- * Internal Address Emulation Register
- ******************************************************************************/
-
-/* Memory Region Base Address (31:12) */
-#define LTQ_EBU_EMU_ADDR_BASE (0xfffff << 12)
-#define LTQ_EBU_EMU_ADDR_BASE_VAL(val) (((val) & 0xfffff) << 12)
-#define LTQ_EBU_EMU_ADDR_BASE_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_BASE) >> 12) & 0xfffff)
-#define LTQ_EBU_EMU_ADDR_BASE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_BASE) | (((val) & 0xfffff) << 12))
-/* Memory Region Address Mask (7:4) */
-#define LTQ_EBU_EMU_ADDR_MASK (0xf << 4)
-#define LTQ_EBU_EMU_ADDR_MASK_VAL(val) (((val) & 0xf) << 4)
-#define LTQ_EBU_EMU_ADDR_MASK_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_MASK) >> 4) & 0xf)
-#define LTQ_EBU_EMU_ADDR_MASK_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_MASK) | (((val) & 0xf) << 4))
-/* Memory Region Mirror Segment B Control (1) */
-#define LTQ_EBU_EMU_ADDR_MRMB (0x1 << 1)
-#define LTQ_EBU_EMU_ADDR_MRMB_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_EBU_EMU_ADDR_MRMB_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_MRMB) >> 1) & 0x1)
-#define LTQ_EBU_EMU_ADDR_MRMB_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_MRMB) | (((val) & 0x1) << 1))
-/* Memory Region Enable Control (0) */
-#define LTQ_EBU_EMU_ADDR_MREC (0x1)
-#define LTQ_EBU_EMU_ADDR_MREC_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_EBU_EMU_ADDR_MREC_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_MREC) >> 0) & 0x1)
-#define LTQ_EBU_EMU_ADDR_MREC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_MREC) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * nternal Emulator Configuration Register
- ******************************************************************************/
-
-/* Overlay Memory Control Region 3 (3) */
-#define LTQ_EBU_EMU_CON_OVL3 (0x1 << 3)
-#define LTQ_EBU_EMU_CON_OVL3_VAL(val) (((val) & 0x1) << 3)
-#define LTQ_EBU_EMU_CON_OVL3_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL3) >> 3) & 0x1)
-#define LTQ_EBU_EMU_CON_OVL3_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL3) | (((val) & 0x1) << 3))
-/* Overlay Memory Control Region 2 (2) */
-#define LTQ_EBU_EMU_CON_OVL2 (0x1 << 2)
-#define LTQ_EBU_EMU_CON_OVL2_VAL(val) (((val) & 0x1) << 2)
-#define LTQ_EBU_EMU_CON_OVL2_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL2) >> 2) & 0x1)
-#define LTQ_EBU_EMU_CON_OVL2_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL2) | (((val) & 0x1) << 2))
-/* Overlay Memory Control Region 1 (1) */
-#define LTQ_EBU_EMU_CON_OVL1 (0x1 << 1)
-#define LTQ_EBU_EMU_CON_OVL1_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_EBU_EMU_CON_OVL1_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL1) >> 1) & 0x1)
-#define LTQ_EBU_EMU_CON_OVL1_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL1) | (((val) & 0x1) << 1))
-/* Overlay Memory Control Region 0 (0) */
-#define LTQ_EBU_EMU_CON_OVL0 (0x1)
-#define LTQ_EBU_EMU_CON_OVL0_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_EBU_EMU_CON_OVL0_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL0) >> 0) & 0x1)
-#define LTQ_EBU_EMU_CON_OVL0_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL0) | (((val) & 0x1) << 0))
-
-#endif /* __LTQ_EBU_H */
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/es_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/es_reg.h
deleted file mode 100644
index da84900f5e..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/es_reg.h
+++ /dev/null
@@ -1,2098 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __ES_REG_H
-#define __ES_REG_H
-
-#define es_r32(reg) ltq_r32(&es->reg)
-#define es_w32(val, reg) ltq_w32(val, &es->reg)
-#define es_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &es->reg)
-
-/** ES register structure */
-struct svip_reg_es {
- volatile unsigned long ps; /* 0x0000 */
- volatile unsigned long p0_ctl; /* 0x0004 */
- volatile unsigned long p1_ctl; /* 0x0008 */
- volatile unsigned long p2_ctl; /* 0x000C */
- volatile unsigned long p0_vlan; /* 0x0010 */
- volatile unsigned long p1_vlan; /* 0x0014 */
- volatile unsigned long p2_vlan; /* 0x0018 */
- volatile unsigned long reserved1[1]; /* 0x001C */
- volatile unsigned long p0_inctl; /* 0x0020 */
- volatile unsigned long p1_inctl; /* 0x0024 */
- volatile unsigned long p2_inctl; /* 0x0028 */
- volatile unsigned long reserved2[1]; /* 0x002C */
- volatile unsigned long p0_ecs_q32; /* 0x0030 */
- volatile unsigned long p0_ecs_q10; /* 0x0034 */
- volatile unsigned long p0_ecw_q32; /* 0x0038 */
- volatile unsigned long p0_ecw_q10; /* 0x003C */
- volatile unsigned long p1_ecs_q32; /* 0x0040 */
- volatile unsigned long p1_ecs_q10; /* 0x0044 */
- volatile unsigned long p1_ecw_q32; /* 0x0048 */
- volatile unsigned long p1_ecw_q10; /* 0x004C */
- volatile unsigned long p2_ecs_q32; /* 0x0050 */
- volatile unsigned long p2_ecs_q10; /* 0x0054 */
- volatile unsigned long p2_ecw_q32; /* 0x0058 */
- volatile unsigned long p2_ecw_q10; /* 0x005C */
- volatile unsigned long int_ena; /* 0x0060 */
- volatile unsigned long int_st; /* 0x0064 */
- volatile unsigned long sw_gctl0; /* 0x0068 */
- volatile unsigned long sw_gctl1; /* 0x006C */
- volatile unsigned long arp; /* 0x0070 */
- volatile unsigned long strm_ctl; /* 0x0074 */
- volatile unsigned long rgmii_ctl; /* 0x0078 */
- volatile unsigned long prt_1p; /* 0x007C */
- volatile unsigned long gbkt_szbs; /* 0x0080 */
- volatile unsigned long gbkt_szebs; /* 0x0084 */
- volatile unsigned long bf_th; /* 0x0088 */
- volatile unsigned long pmac_hd_ctl; /* 0x008C */
- volatile unsigned long pmac_sa1; /* 0x0090 */
- volatile unsigned long pmac_sa2; /* 0x0094 */
- volatile unsigned long pmac_da1; /* 0x0098 */
- volatile unsigned long pmac_da2; /* 0x009C */
- volatile unsigned long pmac_vlan; /* 0x00A0 */
- volatile unsigned long pmac_tx_ipg; /* 0x00A4 */
- volatile unsigned long pmac_rx_ipg; /* 0x00A8 */
- volatile unsigned long adr_tb_ctl0; /* 0x00AC */
- volatile unsigned long adr_tb_ctl1; /* 0x00B0 */
- volatile unsigned long adr_tb_ctl2; /* 0x00B4 */
- volatile unsigned long adr_tb_st0; /* 0x00B8 */
- volatile unsigned long adr_tb_st1; /* 0x00BC */
- volatile unsigned long adr_tb_st2; /* 0x00C0 */
- volatile unsigned long rmon_ctl; /* 0x00C4 */
- volatile unsigned long rmon_st; /* 0x00C8 */
- volatile unsigned long mdio_ctl; /* 0x00CC */
- volatile unsigned long mdio_data; /* 0x00D0 */
- volatile unsigned long tp_flt_act; /* 0x00D4 */
- volatile unsigned long prtcl_flt_act; /* 0x00D8 */
- volatile unsigned long reserved4[9]; /* 0xdc */
- volatile unsigned long vlan_flt0; /* 0x0100 */
- volatile unsigned long vlan_flt1; /* 0x0104 */
- volatile unsigned long vlan_flt2; /* 0x0108 */
- volatile unsigned long vlan_flt3; /* 0x010C */
- volatile unsigned long vlan_flt4; /* 0x0110 */
- volatile unsigned long vlan_flt5; /* 0x0114 */
- volatile unsigned long vlan_flt6; /* 0x0118 */
- volatile unsigned long vlan_flt7; /* 0x011C */
- volatile unsigned long vlan_flt8; /* 0x0120 */
- volatile unsigned long vlan_flt9; /* 0x0124 */
- volatile unsigned long vlan_flt10; /* 0x0128 */
- volatile unsigned long vlan_flt11; /* 0x012C */
- volatile unsigned long vlan_flt12; /* 0x0130 */
- volatile unsigned long vlan_flt13; /* 0x0134 */
- volatile unsigned long vlan_flt14; /* 0x0138 */
- volatile unsigned long vlan_flt15; /* 0x013C */
- volatile unsigned long tp_flt10; /* 0x0140 */
- volatile unsigned long tp_flt32; /* 0x0144 */
- volatile unsigned long tp_flt54; /* 0x0148 */
- volatile unsigned long tp_flt76; /* 0x014C */
- volatile unsigned long dfsrv_map0; /* 0x0150 */
- volatile unsigned long dfsrv_map1; /* 0x0154 */
- volatile unsigned long dfsrv_map2; /* 0x0158 */
- volatile unsigned long dfsrv_map3; /* 0x015C */
- volatile unsigned long tcp_pf0; /* 0x0160 */
- volatile unsigned long tcp_pf1; /* 0x0164 */
- volatile unsigned long tcp_pf2; /* 0x0168 */
- volatile unsigned long tcp_pf3; /* 0x016C */
- volatile unsigned long tcp_pf4; /* 0x0170 */
- volatile unsigned long tcp_pf5; /* 0x0174 */
- volatile unsigned long tcp_pf6; /* 0x0178 */
- volatile unsigned long tcp_pf7; /* 0x017C */
- volatile unsigned long ra_03_00; /* 0x0180 */
- volatile unsigned long ra_07_04; /* 0x0184 */
- volatile unsigned long ra_0b_08; /* 0x0188 */
- volatile unsigned long ra_0f_0c; /* 0x018C */
- volatile unsigned long ra_13_10; /* 0x0190 */
- volatile unsigned long ra_17_14; /* 0x0194 */
- volatile unsigned long ra_1b_18; /* 0x0198 */
- volatile unsigned long ra_1f_1c; /* 0x019C */
- volatile unsigned long ra_23_20; /* 0x01A0 */
- volatile unsigned long ra_27_24; /* 0x01A4 */
- volatile unsigned long ra_2b_28; /* 0x01A8 */
- volatile unsigned long ra_2f_2c; /* 0x01AC */
- volatile unsigned long prtcl_f0; /* 0x01B0 */
- volatile unsigned long prtcl_f1; /* 0x01B4 */
-};
-
-/*******************************************************************************
- * ES
- ******************************************************************************/
-#define LTQ_ES_PS_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0000))
-#define LTQ_ES_P0_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0004))
-#define LTQ_ES_P1_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0008))
-#define LTQ_ES_P2_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x000C))
-#define LTQ_ES_P0_VLAN_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0010))
-#define LTQ_ES_P1_VLAN_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0014))
-#define LTQ_ES_P2_VLAN_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0010))
-#define LTQ_ES_P0_INCTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0020))
-#define LTQ_ES_P1_INCTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0024))
-#define LTQ_ES_P2_INCTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0028))
-#define LTQ_ES_P0_ECS_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0030))
-#define LTQ_ES_P0_ECS_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0034))
-#define LTQ_ES_P0_ECW_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0038))
-#define LTQ_ES_P0_ECW_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x003C))
-#define LTQ_ES_P1_ECS_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0030))
-#define LTQ_ES_P1_ECS_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0034))
-#define LTQ_ES_P1_ECW_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0038))
-#define LTQ_ES_P1_ECW_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x003C))
-#define LTQ_ES_P2_ECS_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0030))
-#define LTQ_ES_P2_ECS_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0034))
-#define LTQ_ES_P2_ECW_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0038))
-#define LTQ_ES_P2_ECW_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x003C))
-#define LTQ_ES_INT_ENA_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0060))
-#define LTQ_ES_INT_ST_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0064))
-#define LTQ_ES_SW_GCTL0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0068))
-#define LTQ_ES_SW_GCTL1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x006C))
-#define LTQ_ES_ARP_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0070))
-#define LTQ_ES_STRM_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0074))
-#define LTQ_ES_RGMII_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0078))
-#define LTQ_ES_PRT_1P_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x007C))
-#define LTQ_ES_GBKT_SZBS_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0080))
-#define LTQ_ES_GBKT_SZEBS_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0084))
-#define LTQ_ES_BF_TH_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0088))
-#define LTQ_ES_PMAC_HD_CTL ((volatile unsigned int*)(LTQ_ES_BASE + 0x008C))
-#define LTQ_ES_PMAC_SA1 ((volatile unsigned int*)(LTQ_ES_BASE + 0x0090))
-#define LTQ_ES_PMAC_SA2 ((volatile unsigned int*)(LTQ_ES_BASE + 0x0094))
-#define LTQ_ES_PMAC_DA1 ((volatile unsigned int*)(LTQ_ES_BASE + 0x0098))
-#define LTQ_ES_PMAC_DA2 ((volatile unsigned int*)(LTQ_ES_BASE + 0x009C))
-#define LTQ_ES_PMAC_VLAN ((volatile unsigned int*)(LTQ_ES_BASE + 0x00A0))
-#define LTQ_ES_PMAC_TX_IPG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00A4))
-#define LTQ_ES_PMAC_RX_IPG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00A8))
-#define LTQ_ES_ADR_TB_CTL0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00AC))
-#define LTQ_ES_ADR_TB_CTL1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00B0))
-#define LTQ_ES_ADR_TB_CTL2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00B4))
-#define LTQ_ES_ADR_TB_ST0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00B8))
-#define LTQ_ES_ADR_TB_ST1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00BC))
-#define LTQ_ES_ADR_TB_ST2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00C0))
-#define LTQ_ES_RMON_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00C4))
-#define LTQ_ES_RMON_ST_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00C8))
-#define LTQ_ES_MDIO_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00CC))
-#define LTQ_ES_MDIO_DATA_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00D0))
-#define LTQ_ES_TP_FLT_ACT_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00D4))
-#define LTQ_ES_PRTCL_FLT_ACT_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00D8))
-#define LTQ_ES_VLAN_FLT0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0100))
-#define LTQ_ES_VLAN_FLT1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0104))
-#define LTQ_ES_VLAN_FLT2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0108))
-#define LTQ_ES_VLAN_FLT3_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x010C))
-#define LTQ_ES_VLAN_FLT4_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0110))
-#define LTQ_ES_VLAN_FLT5_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0114))
-#define LTQ_ES_VLAN_FLT6_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0118))
-#define LTQ_ES_VLAN_FLT7_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x011C))
-#define LTQ_ES_VLAN_FLT8_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0120))
-#define LTQ_ES_VLAN_FLT9_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0124))
-#define LTQ_ES_VLAN_FLT10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0128))
-#define LTQ_ES_VLAN_FLT11_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x012C))
-#define LTQ_ES_VLAN_FLT12_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0130))
-#define LTQ_ES_VLAN_FLT13_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0134))
-#define LTQ_ES_VLAN_FLT14_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0138))
-#define LTQ_ES_VLAN_FLT15_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x013C))
-#define LTQ_ES_TP_FLT10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0140))
-#define LTQ_ES_TP_FLT32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0144))
-#define LTQ_ES_TP_FLT54_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0148))
-#define LTQ_ES_TP_FLT76_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x014C))
-#define LTQ_ES_DFSRV_MAP0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0150))
-#define LTQ_ES_DFSRV_MAP1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0154))
-#define LTQ_ES_DFSRV_MAP2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0158))
-#define LTQ_ES_DFSRV_MAP3_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x015C))
-#define LTQ_ES_TCP_PF0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0160))
-#define LTQ_ES_TCP_PF1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0164))
-#define LTQ_ES_TCP_PF2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0168))
-#define LTQ_ES_TCP_PF3_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x016C))
-#define LTQ_ES_TCP_PF4_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0170))
-#define LTQ_ES_TCP_PF5_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0174))
-#define LTQ_ES_TCP_PF6_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0178))
-#define LTQ_ES_TCP_PF7_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x017C))
-#define LTQ_ES_RA_03_00_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0180))
-#define LTQ_ES_RA_07_04_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0184))
-#define LTQ_ES_RA_0B_08_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0188))
-#define LTQ_ES_RA_0F_0C_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x018C))
-#define LTQ_ES_RA_13_10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0190))
-#define LTQ_ES_RA_17_14_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0194))
-#define LTQ_ES_RA_1B_18_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0198))
-#define LTQ_ES_RA_1F_1C_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x019C))
-#define LTQ_ES_RA_23_20_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01A0))
-#define LTQ_ES_RA_27_24_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01A4))
-#define LTQ_ES_RA_2B_28_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01A8))
-#define LTQ_ES_RA_2F_2C_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01AC))
-#define LTQ_ES_PRTCL_F0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01B0))
-#define LTQ_ES_PRTCL_F1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01B4))
-
-/*******************************************************************************
- * Port Status Register
- ******************************************************************************/
-
-/* Port 1 Flow Control Status (12) */
-#define LTQ_ES_PS_REG_P1FCS (0x1 << 12)
-#define LTQ_ES_PS_REG_P1FCS_GET(val) ((((val) & LTQ_ES_PS_REG_P1FCS) >> 12) & 0x1)
-/* Port 1 Duplex Status (11) */
-#define LTQ_ES_PS_REG_P1DS (0x1 << 11)
-#define LTQ_ES_PS_REG_P1DS_GET(val) ((((val) & LTQ_ES_PS_REG_P1DS) >> 11) & 0x1)
-/* Port 1 Speed High Status (10) */
-#define LTQ_ES_PS_REG_P1SHS (0x1 << 10)
-#define LTQ_ES_PS_REG_P1SHS_GET(val) ((((val) & LTQ_ES_PS_REG_P1SHS) >> 10) & 0x1)
-/* Port 1 Speed Status (9) */
-#define LTQ_ES_PS_REG_P1SS (0x1 << 9)
-#define LTQ_ES_PS_REG_P1SS_GET(val) ((((val) & LTQ_ES_PS_REG_P1SS) >> 9) & 0x1)
-/* Port 1 Link Status (8) */
-#define LTQ_ES_PS_REG_P1LS (0x1 << 8)
-#define LTQ_ES_PS_REG_P1LS_GET(val) ((((val) & LTQ_ES_PS_REG_P1LS) >> 8) & 0x1)
-/* Port 0 Flow Control Status (4) */
-#define LTQ_ES_PS_REG_P0FCS (0x1 << 4)
-#define LTQ_ES_PS_REG_P0FCS_GET(val) ((((val) & LTQ_ES_PS_REG_P0FCS) >> 4) & 0x1)
-/* Port 0 Duplex Status (3) */
-#define LTQ_ES_PS_REG_P0DS (0x1 << 3)
-#define LTQ_ES_PS_REG_P0DS_GET(val) ((((val) & LTQ_ES_PS_REG_P0DS) >> 3) & 0x1)
-/* Port 0 Speed High Status (2) */
-#define LTQ_ES_PS_REG_P0SHS (0x1 << 2)
-#define LTQ_ES_PS_REG_P0SHS_GET(val) ((((val) & LTQ_ES_PS_REG_P0SHS) >> 2) & 0x1)
-/* Port 0 Speed Status (1) */
-#define LTQ_ES_PS_REG_P0SS (0x1 << 1)
-#define LTQ_ES_PS_REG_P0SS_GET(val) ((((val) & LTQ_ES_PS_REG_P0SS) >> 1) & 0x1)
-/* Port 0 Link Status (0) */
-#define LTQ_ES_PS_REG_P0LS (0x1)
-#define LTQ_ES_PS_REG_P0LS_GET(val) ((((val) & LTQ_ES_PS_REG_P0LS) >> 0) & 0x1)
-
-/*******************************************************************************
- * P0 Control Register
- ******************************************************************************/
-
-/* STP/RSTP port state (31:30) */
-#define LTQ_ES_P0_CTL_REG_SPS (0x3 << 30)
-#define LTQ_ES_P0_CTL_REG_SPS_VAL(val) (((val) & 0x3) << 30)
-#define LTQ_ES_P0_CTL_REG_SPS_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_SPS) >> 30) & 0x3)
-#define LTQ_ES_P0_CTL_REG_SPS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_SPS) | (((val) & 0x3) << 30))
-/* TCP/UDP PRIEN (29) */
-#define LTQ_ES_P0_CTL_REG_TCPE (0x1 << 29)
-#define LTQ_ES_P0_CTL_REG_TCPE_VAL(val) (((val) & 0x1) << 29)
-#define LTQ_ES_P0_CTL_REG_TCPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_TCPE) >> 29) & 0x1)
-#define LTQ_ES_P0_CTL_REG_TCPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_TCPE) | (((val) & 0x1) << 29))
-/* IP over TCP/UDP (28) */
-#define LTQ_ES_P0_CTL_REG_IPOVTU (0x1 << 28)
-#define LTQ_ES_P0_CTL_REG_IPOVTU_VAL(val) (((val) & 0x1) << 28)
-#define LTQ_ES_P0_CTL_REG_IPOVTU_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_IPOVTU) >> 28) & 0x1)
-#define LTQ_ES_P0_CTL_REG_IPOVTU_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_IPOVTU) | (((val) & 0x1) << 28))
-/* VLAN Priority Enable (27) */
-#define LTQ_ES_P0_CTL_REG_VPE (0x1 << 27)
-#define LTQ_ES_P0_CTL_REG_VPE_VAL(val) (((val) & 0x1) << 27)
-#define LTQ_ES_P0_CTL_REG_VPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_VPE) >> 27) & 0x1)
-#define LTQ_ES_P0_CTL_REG_VPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_VPE) | (((val) & 0x1) << 27))
-/* Service Priority Enable (26) */
-#define LTQ_ES_P0_CTL_REG_SPE (0x1 << 26)
-#define LTQ_ES_P0_CTL_REG_SPE_VAL(val) (((val) & 0x1) << 26)
-#define LTQ_ES_P0_CTL_REG_SPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_SPE) >> 26) & 0x1)
-#define LTQ_ES_P0_CTL_REG_SPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_SPE) | (((val) & 0x1) << 26))
-/* IP over VLAN PRI (25) */
-#define LTQ_ES_P0_CTL_REG_IPVLAN (0x1 << 25)
-#define LTQ_ES_P0_CTL_REG_IPVLAN_VAL(val) (((val) & 0x1) << 25)
-#define LTQ_ES_P0_CTL_REG_IPVLAN_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_IPVLAN) >> 25) & 0x1)
-#define LTQ_ES_P0_CTL_REG_IPVLAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_IPVLAN) | (((val) & 0x1) << 25))
-/* Ether Type Priority Enable (24) */
-#define LTQ_ES_P0_CTL_REG_TPE (0x1 << 24)
-#define LTQ_ES_P0_CTL_REG_TPE_VAL(val) (((val) & 0x1) << 24)
-#define LTQ_ES_P0_CTL_REG_TPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_TPE) >> 24) & 0x1)
-#define LTQ_ES_P0_CTL_REG_TPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_TPE) | (((val) & 0x1) << 24))
-/* Force Link Up (18) */
-#define LTQ_ES_P0_CTL_REG_FLP (0x1 << 18)
-#define LTQ_ES_P0_CTL_REG_FLP_VAL(val) (((val) & 0x1) << 18)
-#define LTQ_ES_P0_CTL_REG_FLP_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_FLP) >> 18) & 0x1)
-#define LTQ_ES_P0_CTL_REG_FLP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_FLP) | (((val) & 0x1) << 18))
-/* Force Link Down (17) */
-#define LTQ_ES_P0_CTL_REG_FLD (0x1 << 17)
-#define LTQ_ES_P0_CTL_REG_FLD_VAL(val) (((val) & 0x1) << 17)
-#define LTQ_ES_P0_CTL_REG_FLD_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_FLD) >> 17) & 0x1)
-#define LTQ_ES_P0_CTL_REG_FLD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_FLD) | (((val) & 0x1) << 17))
-/* Ratio Mode for WFQ (16) */
-#define LTQ_ES_P0_CTL_REG_RMWFQ (0x1 << 16)
-#define LTQ_ES_P0_CTL_REG_RMWFQ_VAL(val) (((val) & 0x1) << 16)
-#define LTQ_ES_P0_CTL_REG_RMWFQ_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_RMWFQ) >> 16) & 0x1)
-#define LTQ_ES_P0_CTL_REG_RMWFQ_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_RMWFQ) | (((val) & 0x1) << 16))
-/* Aging Disable (15) */
-#define LTQ_ES_P0_CTL_REG_AD (0x1 << 15)
-#define LTQ_ES_P0_CTL_REG_AD_VAL(val) (((val) & 0x1) << 15)
-#define LTQ_ES_P0_CTL_REG_AD_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_AD) >> 15) & 0x1)
-#define LTQ_ES_P0_CTL_REG_AD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_AD) | (((val) & 0x1) << 15))
-/* Learning Disable (14) */
-#define LTQ_ES_P0_CTL_REG_LD (0x1 << 14)
-#define LTQ_ES_P0_CTL_REG_LD_VAL(val) (((val) & 0x1) << 14)
-#define LTQ_ES_P0_CTL_REG_LD_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_LD) >> 14) & 0x1)
-#define LTQ_ES_P0_CTL_REG_LD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_LD) | (((val) & 0x1) << 14))
-/* Maximum Number of Addresses (12:8) */
-#define LTQ_ES_P0_CTL_REG_MNA024 (0x1f << 8)
-#define LTQ_ES_P0_CTL_REG_MNA024_VAL(val) (((val) & 0x1f) << 8)
-#define LTQ_ES_P0_CTL_REG_MNA024_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_MNA024) >> 8) & 0x1f)
-#define LTQ_ES_P0_CTL_REG_MNA024_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_MNA024) | (((val) & 0x1f) << 8))
-/* PPPOE Port Only (7) */
-#define LTQ_ES_P0_CTL_REG_PPPOEP (0x1 << 7)
-#define LTQ_ES_P0_CTL_REG_PPPOEP_VAL(val) (((val) & 0x1) << 7)
-#define LTQ_ES_P0_CTL_REG_PPPOEP_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_PPPOEP) >> 7) & 0x1)
-#define LTQ_ES_P0_CTL_REG_PPPOEP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_PPPOEP) | (((val) & 0x1) << 7))
-/* PPPOE Manage (6) */
-#define LTQ_ES_P0_CTL_REG_PM (0x1 << 6)
-#define LTQ_ES_P0_CTL_REG_PM_VAL(val) (((val) & 0x1) << 6)
-#define LTQ_ES_P0_CTL_REG_PM_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_PM) >> 6) & 0x1)
-#define LTQ_ES_P0_CTL_REG_PM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_PM) | (((val) & 0x1) << 6))
-/* Port Mirror Option (5:4) */
-#define LTQ_ES_P0_CTL_REG_IPMO (0x3 << 4)
-#define LTQ_ES_P0_CTL_REG_IPMO_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_ES_P0_CTL_REG_IPMO_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_IPMO) >> 4) & 0x3)
-#define LTQ_ES_P0_CTL_REG_IPMO_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_IPMO) | (((val) & 0x3) << 4))
-/* 802.1x Port Authorized state (3:2) */
-#define LTQ_ES_P0_CTL_REG_PAS (0x3 << 2)
-#define LTQ_ES_P0_CTL_REG_PAS_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_P0_CTL_REG_PAS_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_PAS) >> 2) & 0x3)
-#define LTQ_ES_P0_CTL_REG_PAS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_PAS) | (((val) & 0x3) << 2))
-/* Drop Scheme for voilation 802.1x (1) */
-#define LTQ_ES_P0_CTL_REG_DSV8021X (0x1 << 1)
-#define LTQ_ES_P0_CTL_REG_DSV8021X_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_ES_P0_CTL_REG_DSV8021X_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_DSV8021X) >> 1) & 0x1)
-#define LTQ_ES_P0_CTL_REG_DSV8021X_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_DSV8021X) | (((val) & 0x1) << 1))
-/* ByPass Mode for Output (0) */
-#define LTQ_ES_P0_CTL_REG_BYPASS (0x1)
-#define LTQ_ES_P0_CTL_REG_BYPASS_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_ES_P0_CTL_REG_BYPASS_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_BYPASS) >> 0) & 0x1)
-#define LTQ_ES_P0_CTL_REG_BYPASS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_BYPASS) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 0 VLAN Control Register
- ******************************************************************************/
-
-/* Default FID (31:30) */
-#define LTQ_ES_P0_VLAN_REG_DFID (0x3 << 30)
-#define LTQ_ES_P0_VLAN_REG_DFID_VAL(val) (((val) & 0x3) << 30)
-#define LTQ_ES_P0_VLAN_REG_DFID_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_DFID) >> 30) & 0x3)
-#define LTQ_ES_P0_VLAN_REG_DFID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_DFID) | (((val) & 0x3) << 30))
-/* Tagged Base VLAN Enable (29) */
-#define LTQ_ES_P0_VLAN_REG_TBVE (0x1 << 29)
-#define LTQ_ES_P0_VLAN_REG_TBVE_VAL(val) (((val) & 0x1) << 29)
-#define LTQ_ES_P0_VLAN_REG_TBVE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_TBVE) >> 29) & 0x1)
-#define LTQ_ES_P0_VLAN_REG_TBVE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_TBVE) | (((val) & 0x1) << 29))
-/* Input Force No TAG Enable (28) */
-#define LTQ_ES_P0_VLAN_REG_IFNTE (0x1 << 28)
-#define LTQ_ES_P0_VLAN_REG_IFNTE_VAL(val) (((val) & 0x1) << 28)
-#define LTQ_ES_P0_VLAN_REG_IFNTE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_IFNTE) >> 28) & 0x1)
-#define LTQ_ES_P0_VLAN_REG_IFNTE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_IFNTE) | (((val) & 0x1) << 28))
-/* VID Check with the VID table (27) */
-#define LTQ_ES_P0_VLAN_REG_VC (0x1 << 27)
-#define LTQ_ES_P0_VLAN_REG_VC_VAL(val) (((val) & 0x1) << 27)
-#define LTQ_ES_P0_VLAN_REG_VC_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_VC) >> 27) & 0x1)
-#define LTQ_ES_P0_VLAN_REG_VC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_VC) | (((val) & 0x1) << 27))
-/* VLAN Security Disable (26) */
-#define LTQ_ES_P0_VLAN_REG_VSD (0x1 << 26)
-#define LTQ_ES_P0_VLAN_REG_VSD_VAL(val) (((val) & 0x1) << 26)
-#define LTQ_ES_P0_VLAN_REG_VSD_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_VSD) >> 26) & 0x1)
-#define LTQ_ES_P0_VLAN_REG_VSD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_VSD) | (((val) & 0x1) << 26))
-/* Admit Only VLAN_Tagged Packet (25) */
-#define LTQ_ES_P0_VLAN_REG_AOVTP (0x1 << 25)
-#define LTQ_ES_P0_VLAN_REG_AOVTP_VAL(val) (((val) & 0x1) << 25)
-#define LTQ_ES_P0_VLAN_REG_AOVTP_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_AOVTP) >> 25) & 0x1)
-#define LTQ_ES_P0_VLAN_REG_AOVTP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_AOVTP) | (((val) & 0x1) << 25))
-/* VLAN Member Check Enable (24) */
-#define LTQ_ES_P0_VLAN_REG_VMCE (0x1 << 24)
-#define LTQ_ES_P0_VLAN_REG_VMCE_VAL(val) (((val) & 0x1) << 24)
-#define LTQ_ES_P0_VLAN_REG_VMCE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_VMCE) >> 24) & 0x1)
-#define LTQ_ES_P0_VLAN_REG_VMCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_VMCE) | (((val) & 0x1) << 24))
-/* Reserved (23:19) */
-#define LTQ_ES_P0_VLAN_REG_RES (0x1f << 19)
-#define LTQ_ES_P0_VLAN_REG_RES_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_RES) >> 19) & 0x1f)
-/* Default VLAN Port Map (18:16) */
-#define LTQ_ES_P0_VLAN_REG_DVPM (0x7 << 16)
-#define LTQ_ES_P0_VLAN_REG_DVPM_VAL(val) (((val) & 0x7) << 16)
-#define LTQ_ES_P0_VLAN_REG_DVPM_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_DVPM) >> 16) & 0x7)
-#define LTQ_ES_P0_VLAN_REG_DVPM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_DVPM) | (((val) & 0x7) << 16))
-/* Port Priority (15:14) */
-#define LTQ_ES_P0_VLAN_REG_PP (0x3 << 14)
-#define LTQ_ES_P0_VLAN_REG_PP_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_ES_P0_VLAN_REG_PP_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PP) >> 14) & 0x3)
-#define LTQ_ES_P0_VLAN_REG_PP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PP) | (((val) & 0x3) << 14))
-/* Port Priority Enable (13) */
-#define LTQ_ES_P0_VLAN_REG_PPE (0x1 << 13)
-#define LTQ_ES_P0_VLAN_REG_PPE_VAL(val) (((val) & 0x1) << 13)
-#define LTQ_ES_P0_VLAN_REG_PPE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PPE) >> 13) & 0x1)
-#define LTQ_ES_P0_VLAN_REG_PPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PPE) | (((val) & 0x1) << 13))
-/* Portbase VLAN tag member for Port 0 (12) */
-#define LTQ_ES_P0_VLAN_REG_PVTAGMP (0x1 << 12)
-#define LTQ_ES_P0_VLAN_REG_PVTAGMP_VAL(val) (((val) & 0x1) << 12)
-#define LTQ_ES_P0_VLAN_REG_PVTAGMP_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PVTAGMP) >> 12) & 0x1)
-#define LTQ_ES_P0_VLAN_REG_PVTAGMP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PVTAGMP) | (((val) & 0x1) << 12))
-/* PVID (11:0) */
-#define LTQ_ES_P0_VLAN_REG_PVID (0xfff)
-#define LTQ_ES_P0_VLAN_REG_PVID_VAL(val) (((val) & 0xfff) << 0)
-#define LTQ_ES_P0_VLAN_REG_PVID_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PVID) >> 0) & 0xfff)
-#define LTQ_ES_P0_VLAN_REG_PVID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PVID) | (((val) & 0xfff) << 0))
-
-/*******************************************************************************
- * Port 0 Ingress Control Register
- ******************************************************************************/
-
-/* Reserved (31:13) */
-#define LTQ_ES_P0_INCTL_REG_RES (0x7ffff << 13)
-#define LTQ_ES_P0_INCTL_REG_RES_GET(val) ((((val) & LTQ_ES_P0_INCTL_REG_RES) >> 13) & 0x7ffff)
-/* Port 0 Ingress/Egress Timer Tick T selection (12:11) */
-#define LTQ_ES_P0_INCTL_REG_P0ITT (0x3 << 11)
-#define LTQ_ES_P0_INCTL_REG_P0ITT_VAL(val) (((val) & 0x3) << 11)
-#define LTQ_ES_P0_INCTL_REG_P0ITT_GET(val) ((((val) & LTQ_ES_P0_INCTL_REG_P0ITT) >> 11) & 0x3)
-#define LTQ_ES_P0_INCTL_REG_P0ITT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_INCTL_REG_P0ITT) | (((val) & 0x3) << 11))
-/* Port 0 Igress Token R (10:0) */
-#define LTQ_ES_P0_INCTL_REG_P0ITR (0x7ff)
-#define LTQ_ES_P0_INCTL_REG_P0ITR_VAL(val) (((val) & 0x7ff) << 0)
-#define LTQ_ES_P0_INCTL_REG_P0ITR_GET(val) ((((val) & LTQ_ES_P0_INCTL_REG_P0ITR) >> 0) & 0x7ff)
-#define LTQ_ES_P0_INCTL_REG_P0ITR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_INCTL_REG_P0ITR) | (((val) & 0x7ff) << 0))
-
-/*******************************************************************************
- * Port 0 Egress Control for Strict Q32 Register
- ******************************************************************************/
-
-/* Port 0 Egress Token R for Strict Priority Q3 (26:16) */
-#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR (0x7ff << 16)
-#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR_VAL(val) (((val) & 0x7ff) << 16)
-#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR) >> 16) & 0x7ff)
-#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR) | (((val) & 0x7ff) << 16))
-/* Port 0 Egress Token R for Strict Priority Q2 (10:0) */
-#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR (0x7ff)
-#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR_VAL(val) (((val) & 0x7ff) << 0)
-#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR) >> 0) & 0x7ff)
-#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR) | (((val) & 0x7ff) << 0))
-
-/*******************************************************************************
- * Port 0 Egress Control for Strict Q10 Register
- ******************************************************************************/
-
-/* Reserved (31:27) */
-#define LTQ_ES_P0_ECS_Q10_REG_RES (0x1f << 27)
-#define LTQ_ES_P0_ECS_Q10_REG_RES_GET(val) ((((val) & LTQ_ES_P0_ECS_Q10_REG_RES) >> 27) & 0x1f)
-/* Port 0 Egress Token R for Strict Priority Q1 (26:16) */
-#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR (0x7ff << 16)
-#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR_VAL(val) (((val) & 0x7ff) << 16)
-#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR) >> 16) & 0x7ff)
-#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR) | (((val) & 0x7ff) << 16))
-/* Port 0 Egress Token R for Strict Priority Q0 (10:0) */
-#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR (0x7ff)
-#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR_VAL(val) (((val) & 0x7ff) << 0)
-#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR) >> 0) & 0x7ff)
-#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR) | (((val) & 0x7ff) << 0))
-
-/*******************************************************************************
- * Port 0 Egress Control for WFQ Q32 Register
- ******************************************************************************/
-
-/* Reserved (31:27) */
-#define LTQ_ES_P0_ECW_Q32_REG_RES (0x1f << 27)
-#define LTQ_ES_P0_ECW_Q32_REG_RES_GET(val) ((((val) & LTQ_ES_P0_ECW_Q32_REG_RES) >> 27) & 0x1f)
-/* Port 0 Egress Token R for WFQ Q3 (26:16) */
-#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR (0x7ff << 16)
-#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR_VAL(val) (((val) & 0x7ff) << 16)
-#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR) >> 16) & 0x7ff)
-#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR) | (((val) & 0x7ff) << 16))
-/* Port 0 Egress Token R for WFQ Q2 (10:0) */
-#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR (0x7ff)
-#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR_VAL(val) (((val) & 0x7ff) << 0)
-#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR) >> 0) & 0x7ff)
-#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR) | (((val) & 0x7ff) << 0))
-
-/*******************************************************************************
- * Port 0 Egress Control for WFQ Q10 Register
- ******************************************************************************/
-
-/* Reserved (31:27) */
-#define LTQ_ES_P0_ECW_Q10_REG_RES (0x1f << 27)
-#define LTQ_ES_P0_ECW_Q10_REG_RES_GET(val) ((((val) & LTQ_ES_P0_ECW_Q10_REG_RES) >> 27) & 0x1f)
-/* Port 0 Egress Token R for WFQ Q1 (26:16) */
-#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR (0x7ff << 16)
-#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR_VAL(val) (((val) & 0x7ff) << 16)
-#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR) >> 16) & 0x7ff)
-#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR) | (((val) & 0x7ff) << 16))
-/* Port 0 Egress Token R for WFQ Q0 (10:0) */
-#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR (0x7ff)
-#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR_VAL(val) (((val) & 0x7ff) << 0)
-#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR) >> 0) & 0x7ff)
-#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR) | (((val) & 0x7ff) << 0))
-
-/*******************************************************************************
- * Interrupt Enable Register
- ******************************************************************************/
-
-/* Reserved (31:8) */
-#define LTQ_ES_INT_ENA_REG_RES (0xffffff << 8)
-#define LTQ_ES_INT_ENA_REG_RES_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_RES) >> 8) & 0xffffff)
-/* Data Buffer is Full Interrupt Enable (7) */
-#define LTQ_ES_INT_ENA_REG_DBFIE (0x1 << 7)
-#define LTQ_ES_INT_ENA_REG_DBFIE_VAL(val) (((val) & 0x1) << 7)
-#define LTQ_ES_INT_ENA_REG_DBFIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_DBFIE) >> 7) & 0x1)
-#define LTQ_ES_INT_ENA_REG_DBFIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_DBFIE) | (((val) & 0x1) << 7))
-/* Data Buffer is nearly Full Interrupt Enable (6) */
-#define LTQ_ES_INT_ENA_REG_DBNFIE (0x1 << 6)
-#define LTQ_ES_INT_ENA_REG_DBNFIE_VAL(val) (((val) & 0x1) << 6)
-#define LTQ_ES_INT_ENA_REG_DBNFIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_DBNFIE) >> 6) & 0x1)
-#define LTQ_ES_INT_ENA_REG_DBNFIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_DBNFIE) | (((val) & 0x1) << 6))
-/* Learning Table Full Interrupt Enable (5) */
-#define LTQ_ES_INT_ENA_REG_LTFIE (0x1 << 5)
-#define LTQ_ES_INT_ENA_REG_LTFIE_VAL(val) (((val) & 0x1) << 5)
-#define LTQ_ES_INT_ENA_REG_LTFIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_LTFIE) >> 5) & 0x1)
-#define LTQ_ES_INT_ENA_REG_LTFIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_LTFIE) | (((val) & 0x1) << 5))
-/* Leaning Table Access Done Interrupt Enable (4) */
-#define LTQ_ES_INT_ENA_REG_LTADIE (0x1 << 4)
-#define LTQ_ES_INT_ENA_REG_LTADIE_VAL(val) (((val) & 0x1) << 4)
-#define LTQ_ES_INT_ENA_REG_LTADIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_LTADIE) >> 4) & 0x1)
-#define LTQ_ES_INT_ENA_REG_LTADIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_LTADIE) | (((val) & 0x1) << 4))
-/* Port Security Violation Interrupt Enable (3:1) */
-#define LTQ_ES_INT_ENA_REG_PSVIE (0x7 << 1)
-#define LTQ_ES_INT_ENA_REG_PSVIE_VAL(val) (((val) & 0x7) << 1)
-#define LTQ_ES_INT_ENA_REG_PSVIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_PSVIE) >> 1) & 0x7)
-#define LTQ_ES_INT_ENA_REG_PSVIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_PSVIE) | (((val) & 0x7) << 1))
-/* Port Status Change Interrupt Enable (0) */
-#define LTQ_ES_INT_ENA_REG_PSCIE (0x1)
-#define LTQ_ES_INT_ENA_REG_PSCIE_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_ES_INT_ENA_REG_PSCIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_PSCIE) >> 0) & 0x1)
-#define LTQ_ES_INT_ENA_REG_PSCIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_PSCIE) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Interrupt Status Register
- ******************************************************************************/
-
-/* Reserved (31:8) */
-#define LTQ_ES_INT_ST_REG_RES (0xffffff << 8)
-#define LTQ_ES_INT_ST_REG_RES_GET(val) ((((val) & LTQ_ES_INT_ST_REG_RES) >> 8) & 0xffffff)
-/* Data Buffer is Full (7) */
-#define LTQ_ES_INT_ST_REG_DBF (0x1 << 7)
-#define LTQ_ES_INT_ST_REG_DBF_GET(val) ((((val) & LTQ_ES_INT_ST_REG_DBF) >> 7) & 0x1)
-/* Data Buffer is nearly Full (6) */
-#define LTQ_ES_INT_ST_REG_DBNF (0x1 << 6)
-#define LTQ_ES_INT_ST_REG_DBNF_GET(val) ((((val) & LTQ_ES_INT_ST_REG_DBNF) >> 6) & 0x1)
-/* Learning Table Full (5) */
-#define LTQ_ES_INT_ST_REG_LTF (0x1 << 5)
-#define LTQ_ES_INT_ST_REG_LTF_GET(val) ((((val) & LTQ_ES_INT_ST_REG_LTF) >> 5) & 0x1)
-/* Leaning Table Access Done (4) */
-#define LTQ_ES_INT_ST_REG_LTAD (0x1 << 4)
-#define LTQ_ES_INT_ST_REG_LTAD_GET(val) ((((val) & LTQ_ES_INT_ST_REG_LTAD) >> 4) & 0x1)
-/* Port Security Violation (3:1) */
-#define LTQ_ES_INT_ST_REG_PSV (0x7 << 1)
-#define LTQ_ES_INT_ST_REG_PSV_GET(val) ((((val) & LTQ_ES_INT_ST_REG_PSV) >> 1) & 0x7)
-/* Port Status Change (0) */
-#define LTQ_ES_INT_ST_REG_PSC (0x1)
-#define LTQ_ES_INT_ST_REG_PSC_GET(val) ((((val) & LTQ_ES_INT_ST_REG_PSC) >> 0) & 0x1)
-
-/*******************************************************************************
- * Switch Global Control Register 0
- ******************************************************************************/
-
-/* Switch Enable (31) */
-#define LTQ_ES_SW_GCTL0_REG_SE (0x1 << 31)
-#define LTQ_ES_SW_GCTL0_REG_SE_VAL(val) (((val) & 0x1) << 31)
-#define LTQ_ES_SW_GCTL0_REG_SE_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_SE) >> 31) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_SE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_SE) | (((val) & 0x1) << 31))
-/* CRC Check Disable (30) */
-#define LTQ_ES_SW_GCTL0_REG_ICRCCD (0x1 << 30)
-#define LTQ_ES_SW_GCTL0_REG_ICRCCD_VAL(val) (((val) & 0x1) << 30)
-#define LTQ_ES_SW_GCTL0_REG_ICRCCD_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_ICRCCD) >> 30) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_ICRCCD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_ICRCCD) | (((val) & 0x1) << 30))
-/* Replace VID0 (28) */
-#define LTQ_ES_SW_GCTL0_REG_RVID0 (0x1 << 28)
-#define LTQ_ES_SW_GCTL0_REG_RVID0_VAL(val) (((val) & 0x1) << 28)
-#define LTQ_ES_SW_GCTL0_REG_RVID0_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_RVID0) >> 28) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_RVID0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_RVID0) | (((val) & 0x1) << 28))
-/* Replace VID1 (27) */
-#define LTQ_ES_SW_GCTL0_REG_RVID1 (0x1 << 27)
-#define LTQ_ES_SW_GCTL0_REG_RVID1_VAL(val) (((val) & 0x1) << 27)
-#define LTQ_ES_SW_GCTL0_REG_RVID1_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_RVID1) >> 27) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_RVID1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_RVID1) | (((val) & 0x1) << 27))
-/* Replace VIDFFF (26) */
-#define LTQ_ES_SW_GCTL0_REG_RVIDFFF (0x1 << 26)
-#define LTQ_ES_SW_GCTL0_REG_RVIDFFF_VAL(val) (((val) & 0x1) << 26)
-#define LTQ_ES_SW_GCTL0_REG_RVIDFFF_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_RVIDFFF) >> 26) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_RVIDFFF_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_RVIDFFF) | (((val) & 0x1) << 26))
-/* Priority Change Rule (25) */
-#define LTQ_ES_SW_GCTL0_REG_PCR (0x1 << 25)
-#define LTQ_ES_SW_GCTL0_REG_PCR_VAL(val) (((val) & 0x1) << 25)
-#define LTQ_ES_SW_GCTL0_REG_PCR_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_PCR) >> 25) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_PCR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_PCR) | (((val) & 0x1) << 25))
-/* Priority Change Enable (24) */
-#define LTQ_ES_SW_GCTL0_REG_PCE (0x1 << 24)
-#define LTQ_ES_SW_GCTL0_REG_PCE_VAL(val) (((val) & 0x1) << 24)
-#define LTQ_ES_SW_GCTL0_REG_PCE_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_PCE) >> 24) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_PCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_PCE) | (((val) & 0x1) << 24))
-/* Transmit Short IPG Enable (23) */
-#define LTQ_ES_SW_GCTL0_REG_TSIPGE (0x1 << 23)
-#define LTQ_ES_SW_GCTL0_REG_TSIPGE_VAL(val) (((val) & 0x1) << 23)
-#define LTQ_ES_SW_GCTL0_REG_TSIPGE_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_TSIPGE) >> 23) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_TSIPGE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_TSIPGE) | (((val) & 0x1) << 23))
-/* PHY Base Address (22) */
-#define LTQ_ES_SW_GCTL0_REG_PHYBA (0x1 << 22)
-#define LTQ_ES_SW_GCTL0_REG_PHYBA_VAL(val) (((val) & 0x1) << 22)
-#define LTQ_ES_SW_GCTL0_REG_PHYBA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_PHYBA) >> 22) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_PHYBA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_PHYBA) | (((val) & 0x1) << 22))
-/* Drop Packet When Excessive Collision Happen (21) */
-#define LTQ_ES_SW_GCTL0_REG_DPWECH (0x1 << 21)
-#define LTQ_ES_SW_GCTL0_REG_DPWECH_VAL(val) (((val) & 0x1) << 21)
-#define LTQ_ES_SW_GCTL0_REG_DPWECH_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DPWECH) >> 21) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_DPWECH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DPWECH) | (((val) & 0x1) << 21))
-/* Aging Timer Select (20:18) */
-#define LTQ_ES_SW_GCTL0_REG_ATS (0x7 << 18)
-#define LTQ_ES_SW_GCTL0_REG_ATS_VAL(val) (((val) & 0x7) << 18)
-#define LTQ_ES_SW_GCTL0_REG_ATS_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_ATS) >> 18) & 0x7)
-#define LTQ_ES_SW_GCTL0_REG_ATS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_ATS) | (((val) & 0x7) << 18))
-/* Mirror CRC Also (17) */
-#define LTQ_ES_SW_GCTL0_REG_MCA (0x1 << 17)
-#define LTQ_ES_SW_GCTL0_REG_MCA_VAL(val) (((val) & 0x1) << 17)
-#define LTQ_ES_SW_GCTL0_REG_MCA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MCA) >> 17) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_MCA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MCA) | (((val) & 0x1) << 17))
-/* Mirror RXER Also (16) */
-#define LTQ_ES_SW_GCTL0_REG_MRA (0x1 << 16)
-#define LTQ_ES_SW_GCTL0_REG_MRA_VAL(val) (((val) & 0x1) << 16)
-#define LTQ_ES_SW_GCTL0_REG_MRA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MRA) >> 16) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_MRA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MRA) | (((val) & 0x1) << 16))
-/* Mirror PAUSE Also (15) */
-#define LTQ_ES_SW_GCTL0_REG_MPA (0x1 << 15)
-#define LTQ_ES_SW_GCTL0_REG_MPA_VAL(val) (((val) & 0x1) << 15)
-#define LTQ_ES_SW_GCTL0_REG_MPA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MPA) >> 15) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_MPA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MPA) | (((val) & 0x1) << 15))
-/* Mirror Long Also (14) */
-#define LTQ_ES_SW_GCTL0_REG_MLA (0x1 << 14)
-#define LTQ_ES_SW_GCTL0_REG_MLA_VAL(val) (((val) & 0x1) << 14)
-#define LTQ_ES_SW_GCTL0_REG_MLA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MLA) >> 14) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_MLA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MLA) | (((val) & 0x1) << 14))
-/* Mirror Short Also (13) */
-#define LTQ_ES_SW_GCTL0_REG_MSA (0x1 << 13)
-#define LTQ_ES_SW_GCTL0_REG_MSA_VAL(val) (((val) & 0x1) << 13)
-#define LTQ_ES_SW_GCTL0_REG_MSA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MSA) >> 13) & 0x1)
-#define LTQ_ES_SW_GCTL0_REG_MSA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MSA) | (((val) & 0x1) << 13))
-/* Sniffer port number (12:11) */
-#define LTQ_ES_SW_GCTL0_REG_SNIFFPN (0x3 << 11)
-#define LTQ_ES_SW_GCTL0_REG_SNIFFPN_VAL(val) (((val) & 0x3) << 11)
-#define LTQ_ES_SW_GCTL0_REG_SNIFFPN_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_SNIFFPN) >> 11) & 0x3)
-#define LTQ_ES_SW_GCTL0_REG_SNIFFPN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_SNIFFPN) | (((val) & 0x3) << 11))
-/* Max Packet Length (MAXPKTLEN) (9:8) */
-#define LTQ_ES_SW_GCTL0_REG_MPL (0x3 << 8)
-#define LTQ_ES_SW_GCTL0_REG_MPL_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_ES_SW_GCTL0_REG_MPL_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MPL) >> 8) & 0x3)
-#define LTQ_ES_SW_GCTL0_REG_MPL_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MPL) | (((val) & 0x3) << 8))
-/* Discard Mode (Drop scheme for Packets Classified as Q3) (7:6) */
-#define LTQ_ES_SW_GCTL0_REG_DMQ3 (0x3 << 6)
-#define LTQ_ES_SW_GCTL0_REG_DMQ3_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_ES_SW_GCTL0_REG_DMQ3_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ3) >> 6) & 0x3)
-#define LTQ_ES_SW_GCTL0_REG_DMQ3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ3) | (((val) & 0x3) << 6))
-/* Discard Mode (Drop scheme for Packets Classified as Q2) (5:4) */
-#define LTQ_ES_SW_GCTL0_REG_DMQ2 (0x3 << 4)
-#define LTQ_ES_SW_GCTL0_REG_DMQ2_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_ES_SW_GCTL0_REG_DMQ2_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ2) >> 4) & 0x3)
-#define LTQ_ES_SW_GCTL0_REG_DMQ2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ2) | (((val) & 0x3) << 4))
-/* Discard Mode (Drop scheme for Packets Classified as Q1) (3:2) */
-#define LTQ_ES_SW_GCTL0_REG_DMQ1 (0x3 << 2)
-#define LTQ_ES_SW_GCTL0_REG_DMQ1_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_SW_GCTL0_REG_DMQ1_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ1) >> 2) & 0x3)
-#define LTQ_ES_SW_GCTL0_REG_DMQ1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ1) | (((val) & 0x3) << 2))
-/* Discard Mode (Drop scheme for Packets Classified as Q0) (1:0) */
-#define LTQ_ES_SW_GCTL0_REG_DMQ0 (0x3)
-#define LTQ_ES_SW_GCTL0_REG_DMQ0_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_ES_SW_GCTL0_REG_DMQ0_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ0) >> 0) & 0x3)
-#define LTQ_ES_SW_GCTL0_REG_DMQ0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ0) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * Switch Global Control Register 1
- ******************************************************************************/
-
-/* BIST Done (27) */
-#define LTQ_ES_SW_GCTL1_REG_BISTDN (0x1 << 27)
-#define LTQ_ES_SW_GCTL1_REG_BISTDN_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_BISTDN) >> 27) & 0x1)
-/* Enable drop scheme of TX and RX (26) */
-#define LTQ_ES_SW_GCTL1_REG_EDSTX (0x1 << 26)
-#define LTQ_ES_SW_GCTL1_REG_EDSTX_VAL(val) (((val) & 0x1) << 26)
-#define LTQ_ES_SW_GCTL1_REG_EDSTX_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_EDSTX) >> 26) & 0x1)
-#define LTQ_ES_SW_GCTL1_REG_EDSTX_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_EDSTX) | (((val) & 0x1) << 26))
-/* Congestion threshold for TX queue (25:24) */
-#define LTQ_ES_SW_GCTL1_REG_CTTX (0x3 << 24)
-#define LTQ_ES_SW_GCTL1_REG_CTTX_VAL(val) (((val) & 0x3) << 24)
-#define LTQ_ES_SW_GCTL1_REG_CTTX_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_CTTX) >> 24) & 0x3)
-#define LTQ_ES_SW_GCTL1_REG_CTTX_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_CTTX) | (((val) & 0x3) << 24))
-/* Input Jam Threshold (23:21) */
-#define LTQ_ES_SW_GCTL1_REG_IJT (0x7 << 21)
-#define LTQ_ES_SW_GCTL1_REG_IJT_VAL(val) (((val) & 0x7) << 21)
-#define LTQ_ES_SW_GCTL1_REG_IJT_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_IJT) >> 21) & 0x7)
-#define LTQ_ES_SW_GCTL1_REG_IJT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_IJT) | (((val) & 0x7) << 21))
-/* Do not Identify VLAN after SNAP (20) */
-#define LTQ_ES_SW_GCTL1_REG_DIVS (0x1 << 20)
-#define LTQ_ES_SW_GCTL1_REG_DIVS_VAL(val) (((val) & 0x1) << 20)
-#define LTQ_ES_SW_GCTL1_REG_DIVS_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIVS) >> 20) & 0x1)
-#define LTQ_ES_SW_GCTL1_REG_DIVS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIVS) | (((val) & 0x1) << 20))
-/* Do not Identify IPV6 in PPPOE (19) */
-#define LTQ_ES_SW_GCTL1_REG_DII6P (0x1 << 19)
-#define LTQ_ES_SW_GCTL1_REG_DII6P_VAL(val) (((val) & 0x1) << 19)
-#define LTQ_ES_SW_GCTL1_REG_DII6P_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DII6P) >> 19) & 0x1)
-#define LTQ_ES_SW_GCTL1_REG_DII6P_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DII6P) | (((val) & 0x1) << 19))
-/* Do not Identify IP in PPPOE after SNAP (18) */
-#define LTQ_ES_SW_GCTL1_REG_DIIPS (0x1 << 18)
-#define LTQ_ES_SW_GCTL1_REG_DIIPS_VAL(val) (((val) & 0x1) << 18)
-#define LTQ_ES_SW_GCTL1_REG_DIIPS_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIIPS) >> 18) & 0x1)
-#define LTQ_ES_SW_GCTL1_REG_DIIPS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIIPS) | (((val) & 0x1) << 18))
-/* Do not Identify Ether-Type = 0x0800, IP VER = 6 as IPV6 packets (17) */
-#define LTQ_ES_SW_GCTL1_REG_DIE (0x1 << 17)
-#define LTQ_ES_SW_GCTL1_REG_DIE_VAL(val) (((val) & 0x1) << 17)
-#define LTQ_ES_SW_GCTL1_REG_DIE_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIE) >> 17) & 0x1)
-#define LTQ_ES_SW_GCTL1_REG_DIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIE) | (((val) & 0x1) << 17))
-/* Do not Identify IP in PPPOE (16) */
-#define LTQ_ES_SW_GCTL1_REG_DIIP (0x1 << 16)
-#define LTQ_ES_SW_GCTL1_REG_DIIP_VAL(val) (((val) & 0x1) << 16)
-#define LTQ_ES_SW_GCTL1_REG_DIIP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIIP) >> 16) & 0x1)
-#define LTQ_ES_SW_GCTL1_REG_DIIP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIIP) | (((val) & 0x1) << 16))
-/* Do not Identify SNAP (15) */
-#define LTQ_ES_SW_GCTL1_REG_DIS (0x1 << 15)
-#define LTQ_ES_SW_GCTL1_REG_DIS_VAL(val) (((val) & 0x1) << 15)
-#define LTQ_ES_SW_GCTL1_REG_DIS_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIS) >> 15) & 0x1)
-#define LTQ_ES_SW_GCTL1_REG_DIS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIS) | (((val) & 0x1) << 15))
-/* Unicast Portmap (14:12) */
-#define LTQ_ES_SW_GCTL1_REG_UP (0x7 << 12)
-#define LTQ_ES_SW_GCTL1_REG_UP_VAL(val) (((val) & 0x7) << 12)
-#define LTQ_ES_SW_GCTL1_REG_UP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_UP) >> 12) & 0x7)
-#define LTQ_ES_SW_GCTL1_REG_UP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_UP) | (((val) & 0x7) << 12))
-/* Broadcast Portmap (10:8) */
-#define LTQ_ES_SW_GCTL1_REG_BP (0x7 << 8)
-#define LTQ_ES_SW_GCTL1_REG_BP_VAL(val) (((val) & 0x7) << 8)
-#define LTQ_ES_SW_GCTL1_REG_BP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_BP) >> 8) & 0x7)
-#define LTQ_ES_SW_GCTL1_REG_BP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_BP) | (((val) & 0x7) << 8))
-/* Multicast Portmap (6:4) */
-#define LTQ_ES_SW_GCTL1_REG_MP (0x7 << 4)
-#define LTQ_ES_SW_GCTL1_REG_MP_VAL(val) (((val) & 0x7) << 4)
-#define LTQ_ES_SW_GCTL1_REG_MP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_MP) >> 4) & 0x7)
-#define LTQ_ES_SW_GCTL1_REG_MP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_MP) | (((val) & 0x7) << 4))
-/* Reserve Portmap (2:0) */
-#define LTQ_ES_SW_GCTL1_REG_RP (0x7)
-#define LTQ_ES_SW_GCTL1_REG_RP_VAL(val) (((val) & 0x7) << 0)
-#define LTQ_ES_SW_GCTL1_REG_RP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_RP) >> 0) & 0x7)
-#define LTQ_ES_SW_GCTL1_REG_RP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_RP) | (((val) & 0x7) << 0))
-
-/*******************************************************************************
- * ARP/RARP Register
- ******************************************************************************/
-
-/* MAC Control Action (15:14) */
-#define LTQ_ES_ARP_REG_MACA (0x3 << 14)
-#define LTQ_ES_ARP_REG_MACA_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_ES_ARP_REG_MACA_GET(val) ((((val) & LTQ_ES_ARP_REG_MACA) >> 14) & 0x3)
-#define LTQ_ES_ARP_REG_MACA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_MACA) | (((val) & 0x3) << 14))
-/* Unicast packet Treated as Cross_VLAN packet (13) */
-#define LTQ_ES_ARP_REG_UPT (0x1 << 13)
-#define LTQ_ES_ARP_REG_UPT_VAL(val) (((val) & 0x1) << 13)
-#define LTQ_ES_ARP_REG_UPT_GET(val) ((((val) & LTQ_ES_ARP_REG_UPT) >> 13) & 0x1)
-#define LTQ_ES_ARP_REG_UPT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_UPT) | (((val) & 0x1) << 13))
-/* RARP Packet Treated as Cross_VLAN Packet (12) */
-#define LTQ_ES_ARP_REG_RPT (0x1 << 12)
-#define LTQ_ES_ARP_REG_RPT_VAL(val) (((val) & 0x1) << 12)
-#define LTQ_ES_ARP_REG_RPT_GET(val) ((((val) & LTQ_ES_ARP_REG_RPT) >> 12) & 0x1)
-#define LTQ_ES_ARP_REG_RPT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RPT) | (((val) & 0x1) << 12))
-/* RARP/ARP Packet Action (11:10) */
-#define LTQ_ES_ARP_REG_RAPA (0x3 << 10)
-#define LTQ_ES_ARP_REG_RAPA_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_ARP_REG_RAPA_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPA) >> 10) & 0x3)
-#define LTQ_ES_ARP_REG_RAPA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPA) | (((val) & 0x3) << 10))
-/* RARP/ARP Packet Priority Enable (9) */
-#define LTQ_ES_ARP_REG_RAPPE (0x1 << 9)
-#define LTQ_ES_ARP_REG_RAPPE_VAL(val) (((val) & 0x1) << 9)
-#define LTQ_ES_ARP_REG_RAPPE_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPPE) >> 9) & 0x1)
-#define LTQ_ES_ARP_REG_RAPPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPPE) | (((val) & 0x1) << 9))
-/* RARP/ARP Packet Priority (8:7) */
-#define LTQ_ES_ARP_REG_RAPP (0x3 << 7)
-#define LTQ_ES_ARP_REG_RAPP_VAL(val) (((val) & 0x3) << 7)
-#define LTQ_ES_ARP_REG_RAPP_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPP) >> 7) & 0x3)
-#define LTQ_ES_ARP_REG_RAPP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPP) | (((val) & 0x3) << 7))
-/* RARP/ARP Packet Output Tag Handle (6:5) */
-#define LTQ_ES_ARP_REG_RAPOTH (0x3 << 5)
-#define LTQ_ES_ARP_REG_RAPOTH_VAL(val) (((val) & 0x3) << 5)
-#define LTQ_ES_ARP_REG_RAPOTH_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPOTH) >> 5) & 0x3)
-#define LTQ_ES_ARP_REG_RAPOTH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPOTH) | (((val) & 0x3) << 5))
-/* ARP Packet Treated as Cross _ VLAN Packet (4) */
-#define LTQ_ES_ARP_REG_APT (0x1 << 4)
-#define LTQ_ES_ARP_REG_APT_VAL(val) (((val) & 0x1) << 4)
-#define LTQ_ES_ARP_REG_APT_GET(val) ((((val) & LTQ_ES_ARP_REG_APT) >> 4) & 0x1)
-#define LTQ_ES_ARP_REG_APT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_APT) | (((val) & 0x1) << 4))
-/* RARP/ARP Packet Treated as Management Packet (3) */
-#define LTQ_ES_ARP_REG_RAPTM (0x1 << 3)
-#define LTQ_ES_ARP_REG_RAPTM_VAL(val) (((val) & 0x1) << 3)
-#define LTQ_ES_ARP_REG_RAPTM_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPTM) >> 3) & 0x1)
-#define LTQ_ES_ARP_REG_RAPTM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPTM) | (((val) & 0x1) << 3))
-/* RARP/ARP Packet Treated as Span Packet (2) */
-#define LTQ_ES_ARP_REG_TAPTS (0x1 << 2)
-#define LTQ_ES_ARP_REG_TAPTS_VAL(val) (((val) & 0x1) << 2)
-#define LTQ_ES_ARP_REG_TAPTS_GET(val) ((((val) & LTQ_ES_ARP_REG_TAPTS) >> 2) & 0x1)
-#define LTQ_ES_ARP_REG_TAPTS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_TAPTS) | (((val) & 0x1) << 2))
-/* Trap ARP Packet (1) */
-#define LTQ_ES_ARP_REG_TAP (0x1 << 1)
-#define LTQ_ES_ARP_REG_TAP_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_ES_ARP_REG_TAP_GET(val) ((((val) & LTQ_ES_ARP_REG_TAP) >> 1) & 0x1)
-#define LTQ_ES_ARP_REG_TAP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_TAP) | (((val) & 0x1) << 1))
-/* Trap RARP Packet (0) */
-#define LTQ_ES_ARP_REG_TRP (0x1)
-#define LTQ_ES_ARP_REG_TRP_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_ES_ARP_REG_TRP_GET(val) ((((val) & LTQ_ES_ARP_REG_TRP) >> 0) & 0x1)
-#define LTQ_ES_ARP_REG_TRP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_TRP) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Storm control Register
- ******************************************************************************/
-
-/* Reserved (31:29) */
-#define LTQ_ES_STRM_CTL_REG_RES (0x7 << 29)
-#define LTQ_ES_STRM_CTL_REG_RES_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_RES) >> 29) & 0x7)
-/* 10M Threshold (28:16) */
-#define LTQ_ES_STRM_CTL_REG_STORM_10_TH (0x1fff << 16)
-#define LTQ_ES_STRM_CTL_REG_STORM_10_TH_VAL(val) (((val) & 0x1fff) << 16)
-#define LTQ_ES_STRM_CTL_REG_STORM_10_TH_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_10_TH) >> 16) & 0x1fff)
-#define LTQ_ES_STRM_CTL_REG_STORM_10_TH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_10_TH) | (((val) & 0x1fff) << 16))
-/* Storm Enable for Broadcast Packets (15) */
-#define LTQ_ES_STRM_CTL_REG_STORM_B (0x1 << 15)
-#define LTQ_ES_STRM_CTL_REG_STORM_B_VAL(val) (((val) & 0x1) << 15)
-#define LTQ_ES_STRM_CTL_REG_STORM_B_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_B) >> 15) & 0x1)
-#define LTQ_ES_STRM_CTL_REG_STORM_B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_B) | (((val) & 0x1) << 15))
-/* Storm Enable for Multicast Packets (14) */
-#define LTQ_ES_STRM_CTL_REG_STORM_M (0x1 << 14)
-#define LTQ_ES_STRM_CTL_REG_STORM_M_VAL(val) (((val) & 0x1) << 14)
-#define LTQ_ES_STRM_CTL_REG_STORM_M_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_M) >> 14) & 0x1)
-#define LTQ_ES_STRM_CTL_REG_STORM_M_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_M) | (((val) & 0x1) << 14))
-/* Storm Enable for Un-learned Unicast Packets (13) */
-#define LTQ_ES_STRM_CTL_REG_STORM_U (0x1 << 13)
-#define LTQ_ES_STRM_CTL_REG_STORM_U_VAL(val) (((val) & 0x1) << 13)
-#define LTQ_ES_STRM_CTL_REG_STORM_U_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_U) >> 13) & 0x1)
-#define LTQ_ES_STRM_CTL_REG_STORM_U_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_U) | (((val) & 0x1) << 13))
-/* 100M Threshold (12:0) */
-#define LTQ_ES_STRM_CTL_REG_STORM_100_TH (0x1fff)
-#define LTQ_ES_STRM_CTL_REG_STORM_100_TH_VAL(val) (((val) & 0x1fff) << 0)
-#define LTQ_ES_STRM_CTL_REG_STORM_100_TH_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_100_TH) >> 0) & 0x1fff)
-#define LTQ_ES_STRM_CTL_REG_STORM_100_TH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_100_TH) | (((val) & 0x1fff) << 0))
-
-/*******************************************************************************
- * RGMII/GMII Port Control Register
- ******************************************************************************/
-
-/* Management Clock Select (31:24) */
-#define LTQ_ES_RGMII_CTL_REG_MCS (0xff << 24)
-#define LTQ_ES_RGMII_CTL_REG_MCS_VAL(val) (((val) & 0xff) << 24)
-#define LTQ_ES_RGMII_CTL_REG_MCS_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_MCS) >> 24) & 0xff)
-#define LTQ_ES_RGMII_CTL_REG_MCS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_MCS) | (((val) & 0xff) << 24))
-/* Interface Selection (19:18) */
-#define LTQ_ES_RGMII_CTL_REG_IS (0x3 << 18)
-#define LTQ_ES_RGMII_CTL_REG_IS_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_IS) >> 18) & 0x3)
-/* Port 1 RGMII Rx Clock Delay (17:16) */
-#define LTQ_ES_RGMII_CTL_REG_P1RDLY (0x3 << 16)
-#define LTQ_ES_RGMII_CTL_REG_P1RDLY_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_ES_RGMII_CTL_REG_P1RDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1RDLY) >> 16) & 0x3)
-#define LTQ_ES_RGMII_CTL_REG_P1RDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1RDLY) | (((val) & 0x3) << 16))
-/* Port 1 RGMII Tx Clock Delay (15:14) */
-#define LTQ_ES_RGMII_CTL_REG_P1TDLY (0x3 << 14)
-#define LTQ_ES_RGMII_CTL_REG_P1TDLY_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_ES_RGMII_CTL_REG_P1TDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1TDLY) >> 14) & 0x3)
-#define LTQ_ES_RGMII_CTL_REG_P1TDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1TDLY) | (((val) & 0x3) << 14))
-/* Port 1 Speed (13:12) */
-#define LTQ_ES_RGMII_CTL_REG_P1SPD (0x3 << 12)
-#define LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(val) (((val) & 0x3) << 12)
-#define LTQ_ES_RGMII_CTL_REG_P1SPD_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1SPD) >> 12) & 0x3)
-#define LTQ_ES_RGMII_CTL_REG_P1SPD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1SPD) | (((val) & 0x3) << 12))
-/* Port 1 Duplex mode (11) */
-#define LTQ_ES_RGMII_CTL_REG_P1DUP (0x1 << 11)
-#define LTQ_ES_RGMII_CTL_REG_P1DUP_VAL(val) (((val) & 0x1) << 11)
-#define LTQ_ES_RGMII_CTL_REG_P1DUP_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1DUP) >> 11) & 0x1)
-#define LTQ_ES_RGMII_CTL_REG_P1DUP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1DUP) | (((val) & 0x1) << 11))
-/* Port 1 Flow Control Enable (10) */
-#define LTQ_ES_RGMII_CTL_REG_P1FCE (0x1 << 10)
-#define LTQ_ES_RGMII_CTL_REG_P1FCE_VAL(val) (((val) & 0x1) << 10)
-#define LTQ_ES_RGMII_CTL_REG_P1FCE_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1FCE) >> 10) & 0x1)
-#define LTQ_ES_RGMII_CTL_REG_P1FCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1FCE) | (((val) & 0x1) << 10))
-/* Port 0 RGMII Rx Clock Delay (7:6) */
-#define LTQ_ES_RGMII_CTL_REG_P0RDLY (0x3 << 6)
-#define LTQ_ES_RGMII_CTL_REG_P0RDLY_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_ES_RGMII_CTL_REG_P0RDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0RDLY) >> 6) & 0x3)
-#define LTQ_ES_RGMII_CTL_REG_P0RDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0RDLY) | (((val) & 0x3) << 6))
-/* Port 0 RGMII Tx Clock Delay (5:4) */
-#define LTQ_ES_RGMII_CTL_REG_P0TDLY (0x3 << 4)
-#define LTQ_ES_RGMII_CTL_REG_P0TDLY_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_ES_RGMII_CTL_REG_P0TDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0TDLY) >> 4) & 0x3)
-#define LTQ_ES_RGMII_CTL_REG_P0TDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0TDLY) | (((val) & 0x3) << 4))
-/* Port 0 Speed (3:2) */
-#define LTQ_ES_RGMII_CTL_REG_P0SPD (0x3 << 2)
-#define LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_RGMII_CTL_REG_P0SPD_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0SPD) >> 2) & 0x3)
-#define LTQ_ES_RGMII_CTL_REG_P0SPD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0SPD) | (((val) & 0x3) << 2))
-/* Port 0 Duplex mode (1) */
-#define LTQ_ES_RGMII_CTL_REG_P0DUP (0x1 << 1)
-#define LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_ES_RGMII_CTL_REG_P0DUP_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0DUP) >> 1) & 0x1)
-#define LTQ_ES_RGMII_CTL_REG_P0DUP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0DUP) | (((val) & 0x1) << 1))
-/* Port 0 Flow Control Enable (0) */
-#define LTQ_ES_RGMII_CTL_REG_P0FCE (0x1)
-#define LTQ_ES_RGMII_CTL_REG_P0FCE_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_ES_RGMII_CTL_REG_P0FCE_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0FCE) >> 0) & 0x1)
-#define LTQ_ES_RGMII_CTL_REG_P0FCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0FCE) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * 802.1p Priority Map Register
- ******************************************************************************/
-
-/* Priority Queue 7 (15:14) */
-#define LTQ_ES_PRT_1P_REG_1PPQ7 (0x3 << 14)
-#define LTQ_ES_PRT_1P_REG_1PPQ7_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_ES_PRT_1P_REG_1PPQ7_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ7) >> 14) & 0x3)
-#define LTQ_ES_PRT_1P_REG_1PPQ7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ7) | (((val) & 0x3) << 14))
-/* Priority Queue 6 (13:12) */
-#define LTQ_ES_PRT_1P_REG_1PPQ6 (0x3 << 12)
-#define LTQ_ES_PRT_1P_REG_1PPQ6_VAL(val) (((val) & 0x3) << 12)
-#define LTQ_ES_PRT_1P_REG_1PPQ6_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ6) >> 12) & 0x3)
-#define LTQ_ES_PRT_1P_REG_1PPQ6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ6) | (((val) & 0x3) << 12))
-/* Priority Queue 5 (11:10) */
-#define LTQ_ES_PRT_1P_REG_1PPQ5 (0x3 << 10)
-#define LTQ_ES_PRT_1P_REG_1PPQ5_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_PRT_1P_REG_1PPQ5_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ5) >> 10) & 0x3)
-#define LTQ_ES_PRT_1P_REG_1PPQ5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ5) | (((val) & 0x3) << 10))
-/* Priority Queue 4 (9:8) */
-#define LTQ_ES_PRT_1P_REG_1PPQ4 (0x3 << 8)
-#define LTQ_ES_PRT_1P_REG_1PPQ4_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_ES_PRT_1P_REG_1PPQ4_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ4) >> 8) & 0x3)
-#define LTQ_ES_PRT_1P_REG_1PPQ4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ4) | (((val) & 0x3) << 8))
-/* Priority Queue 3 (7:6) */
-#define LTQ_ES_PRT_1P_REG_1PPQ3 (0x3 << 6)
-#define LTQ_ES_PRT_1P_REG_1PPQ3_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_ES_PRT_1P_REG_1PPQ3_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ3) >> 6) & 0x3)
-#define LTQ_ES_PRT_1P_REG_1PPQ3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ3) | (((val) & 0x3) << 6))
-/* Priority Queue 2 (5:4) */
-#define LTQ_ES_PRT_1P_REG_1PPQ2 (0x3 << 4)
-#define LTQ_ES_PRT_1P_REG_1PPQ2_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_ES_PRT_1P_REG_1PPQ2_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ2) >> 4) & 0x3)
-#define LTQ_ES_PRT_1P_REG_1PPQ2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ2) | (((val) & 0x3) << 4))
-/* Priority Queue 1 (3:2) */
-#define LTQ_ES_PRT_1P_REG_1PPQ1 (0x3 << 2)
-#define LTQ_ES_PRT_1P_REG_1PPQ1_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_PRT_1P_REG_1PPQ1_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ1) >> 2) & 0x3)
-#define LTQ_ES_PRT_1P_REG_1PPQ1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ1) | (((val) & 0x3) << 2))
-/* Priority Queue 0 (1:0) */
-#define LTQ_ES_PRT_1P_REG_1PPQ0 (0x3)
-#define LTQ_ES_PRT_1P_REG_1PPQ0_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_ES_PRT_1P_REG_1PPQ0_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ0) >> 0) & 0x3)
-#define LTQ_ES_PRT_1P_REG_1PPQ0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ0) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * Global Bucket Size Base counter
- ******************************************************************************/
-
-/* Reserved (31:18) */
-#define LTQ_ES_GBKT_SZBS_REG_REV (0x3fff << 18)
-#define LTQ_ES_GBKT_SZBS_REG_REV_GET(val) ((((val) & LTQ_ES_GBKT_SZBS_REG_REV) >> 18) & 0x3fff)
-/* Base[17:0] (17:0) */
-#define LTQ_ES_GBKT_SZBS_REG_BASE17_0 (0x3ffff)
-#define LTQ_ES_GBKT_SZBS_REG_BASE17_0_VAL(val) (((val) & 0x3ffff) << 0)
-#define LTQ_ES_GBKT_SZBS_REG_BASE17_0_GET(val) ((((val) & LTQ_ES_GBKT_SZBS_REG_BASE17_0) >> 0) & 0x3ffff)
-#define LTQ_ES_GBKT_SZBS_REG_BASE17_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_GBKT_SZBS_REG_BASE17_0) | (((val) & 0x3ffff) << 0))
-
-/*******************************************************************************
- * Global Bucket Size Extend Base Counter
- ******************************************************************************/
-
-/* Reserved (31:18) */
-#define LTQ_ES_GBKT_SZEBS_REG_REV (0x3fff << 18)
-#define LTQ_ES_GBKT_SZEBS_REG_REV_GET(val) ((((val) & LTQ_ES_GBKT_SZEBS_REG_REV) >> 18) & 0x3fff)
-/* Extend Base[17:0] (17:0) */
-#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0 (0x3ffff)
-#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0_VAL(val) (((val) & 0x3ffff) << 0)
-#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0_GET(val) ((((val) & LTQ_ES_GBKT_SZEBS_REG_EBASE17_0) >> 0) & 0x3ffff)
-#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_GBKT_SZEBS_REG_EBASE17_0) | (((val) & 0x3ffff) << 0))
-
-/*******************************************************************************
- * Buffer Threshold Register
- ******************************************************************************/
-
-/* Port Unfull Offset 3 (31:30) */
-#define LTQ_ES_BF_TH_REG_PUO3 (0x3 << 30)
-#define LTQ_ES_BF_TH_REG_PUO3_VAL(val) (((val) & 0x3) << 30)
-#define LTQ_ES_BF_TH_REG_PUO3_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO3) >> 30) & 0x3)
-#define LTQ_ES_BF_TH_REG_PUO3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO3) | (((val) & 0x3) << 30))
-/* Port Unfull Offset 2 (29:28) */
-#define LTQ_ES_BF_TH_REG_PUO2 (0x3 << 28)
-#define LTQ_ES_BF_TH_REG_PUO2_VAL(val) (((val) & 0x3) << 28)
-#define LTQ_ES_BF_TH_REG_PUO2_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO2) >> 28) & 0x3)
-#define LTQ_ES_BF_TH_REG_PUO2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO2) | (((val) & 0x3) << 28))
-/* Port Unfull Offset 1 (27:26) */
-#define LTQ_ES_BF_TH_REG_PUO1 (0x3 << 26)
-#define LTQ_ES_BF_TH_REG_PUO1_VAL(val) (((val) & 0x3) << 26)
-#define LTQ_ES_BF_TH_REG_PUO1_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO1) >> 26) & 0x3)
-#define LTQ_ES_BF_TH_REG_PUO1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO1) | (((val) & 0x3) << 26))
-/* Port Unfull Offset 0 (25:24) */
-#define LTQ_ES_BF_TH_REG_PUO0 (0x3 << 24)
-#define LTQ_ES_BF_TH_REG_PUO0_VAL(val) (((val) & 0x3) << 24)
-#define LTQ_ES_BF_TH_REG_PUO0_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO0) >> 24) & 0x3)
-#define LTQ_ES_BF_TH_REG_PUO0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO0) | (((val) & 0x3) << 24))
-/* Port Full Offset 3 (23:22) */
-#define LTQ_ES_BF_TH_REG_PFO3 (0x3 << 22)
-#define LTQ_ES_BF_TH_REG_PFO3_VAL(val) (((val) & 0x3) << 22)
-#define LTQ_ES_BF_TH_REG_PFO3_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO3) >> 22) & 0x3)
-#define LTQ_ES_BF_TH_REG_PFO3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO3) | (((val) & 0x3) << 22))
-/* Port Full Offset 2 (21:20) */
-#define LTQ_ES_BF_TH_REG_PFO2 (0x3 << 20)
-#define LTQ_ES_BF_TH_REG_PFO2_VAL(val) (((val) & 0x3) << 20)
-#define LTQ_ES_BF_TH_REG_PFO2_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO2) >> 20) & 0x3)
-#define LTQ_ES_BF_TH_REG_PFO2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO2) | (((val) & 0x3) << 20))
-/* Port Full Offset 1 (19:18) */
-#define LTQ_ES_BF_TH_REG_PFO1 (0x3 << 18)
-#define LTQ_ES_BF_TH_REG_PFO1_VAL(val) (((val) & 0x3) << 18)
-#define LTQ_ES_BF_TH_REG_PFO1_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO1) >> 18) & 0x3)
-#define LTQ_ES_BF_TH_REG_PFO1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO1) | (((val) & 0x3) << 18))
-/* Port Full Offset 0 (17:16) */
-#define LTQ_ES_BF_TH_REG_PFO0 (0x3 << 16)
-#define LTQ_ES_BF_TH_REG_PFO0_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_ES_BF_TH_REG_PFO0_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO0) >> 16) & 0x3)
-#define LTQ_ES_BF_TH_REG_PFO0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO0) | (((val) & 0x3) << 16))
-/* Reserved (15:14) */
-#define LTQ_ES_BF_TH_REG_RES (0x3 << 14)
-#define LTQ_ES_BF_TH_REG_RES_GET(val) ((((val) & LTQ_ES_BF_TH_REG_RES) >> 14) & 0x3)
-/* Total Low Add (13) */
-#define LTQ_ES_BF_TH_REG_TLA (0x1 << 13)
-#define LTQ_ES_BF_TH_REG_TLA_VAL(val) (((val) & 0x1) << 13)
-#define LTQ_ES_BF_TH_REG_TLA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_TLA) >> 13) & 0x1)
-#define LTQ_ES_BF_TH_REG_TLA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_TLA) | (((val) & 0x1) << 13))
-/* Total High Add (12) */
-#define LTQ_ES_BF_TH_REG_THA (0x1 << 12)
-#define LTQ_ES_BF_TH_REG_THA_VAL(val) (((val) & 0x1) << 12)
-#define LTQ_ES_BF_TH_REG_THA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_THA) >> 12) & 0x1)
-#define LTQ_ES_BF_TH_REG_THA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_THA) | (((val) & 0x1) << 12))
-/* Total Low Offset (11:10) */
-#define LTQ_ES_BF_TH_REG_TLO (0x3 << 10)
-#define LTQ_ES_BF_TH_REG_TLO_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_BF_TH_REG_TLO_GET(val) ((((val) & LTQ_ES_BF_TH_REG_TLO) >> 10) & 0x3)
-#define LTQ_ES_BF_TH_REG_TLO_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_TLO) | (((val) & 0x3) << 10))
-/* Total High Offset (9:8) */
-#define LTQ_ES_BF_TH_REG_THO (0x3 << 8)
-#define LTQ_ES_BF_TH_REG_THO_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_ES_BF_TH_REG_THO_GET(val) ((((val) & LTQ_ES_BF_TH_REG_THO) >> 8) & 0x3)
-#define LTQ_ES_BF_TH_REG_THO_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_THO) | (((val) & 0x3) << 8))
-/* Port Unfull Add (7:4) */
-#define LTQ_ES_BF_TH_REG_PUA (0xf << 4)
-#define LTQ_ES_BF_TH_REG_PUA_VAL(val) (((val) & 0xf) << 4)
-#define LTQ_ES_BF_TH_REG_PUA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUA) >> 4) & 0xf)
-#define LTQ_ES_BF_TH_REG_PUA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUA) | (((val) & 0xf) << 4))
-/* Port Full Add (3:0) */
-#define LTQ_ES_BF_TH_REG_PFA (0xf)
-#define LTQ_ES_BF_TH_REG_PFA_VAL(val) (((val) & 0xf) << 0)
-#define LTQ_ES_BF_TH_REG_PFA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFA) >> 0) & 0xf)
-#define LTQ_ES_BF_TH_REG_PFA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFA) | (((val) & 0xf) << 0))
-
-/*******************************************************************************
- * PMAC Header Control Register
- ******************************************************************************/
-
-/* Reserved (31:22) */
-#define LTQ_ES_PMAC_HD_CTL_RES (0x3ff << 22)
-#define LTQ_ES_PMAC_HD_CTL_RES_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_RES) >> 22) & 0x3ff)
-/* Remove Layer-2 Header from Packets Going from PMAC to DMA (21) */
-#define LTQ_ES_PMAC_HD_CTL_RL2 (0x1 << 21)
-#define LTQ_ES_PMAC_HD_CTL_RL2_VAL(val) (((val) & 0x1) << 21)
-#define LTQ_ES_PMAC_HD_CTL_RL2_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_RL2) >> 21) & 0x1)
-#define LTQ_ES_PMAC_HD_CTL_RL2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_RL2) | (((val) & 0x1) << 21))
-/* Remove CRC from Packets Going from PMAC to DMA (20) */
-#define LTQ_ES_PMAC_HD_CTL_RC (0x1 << 20)
-#define LTQ_ES_PMAC_HD_CTL_RC_VAL(val) (((val) & 0x1) << 20)
-#define LTQ_ES_PMAC_HD_CTL_RC_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_RC) >> 20) & 0x1)
-#define LTQ_ES_PMAC_HD_CTL_RC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_RC) | (((val) & 0x1) << 20))
-/* Status Header for Packets from PMAC to DMA (19) */
-#define LTQ_ES_PMAC_HD_CTL_AS (0x1 << 19)
-#define LTQ_ES_PMAC_HD_CTL_AS_VAL(val) (((val) & 0x1) << 19)
-#define LTQ_ES_PMAC_HD_CTL_AS_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_AS) >> 19) & 0x1)
-#define LTQ_ES_PMAC_HD_CTL_AS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_AS) | (((val) & 0x1) << 19))
-/* Add CRC for packets from DMA to PMAC (18) */
-#define LTQ_ES_PMAC_HD_CTL_AC (0x1 << 18)
-#define LTQ_ES_PMAC_HD_CTL_AC_VAL(val) (((val) & 0x1) << 18)
-#define LTQ_ES_PMAC_HD_CTL_AC_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_AC) >> 18) & 0x1)
-#define LTQ_ES_PMAC_HD_CTL_AC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_AC) | (((val) & 0x1) << 18))
-/* Contains the length/type value to the added to packets from DMA to PMAC (17:2) */
-#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN (0xffff << 2)
-#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN_VAL(val) (((val) & 0xffff) << 2)
-#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_TYPE_LEN) >> 2) & 0xffff)
-#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_TYPE_LEN) | (((val) & 0xffff) << 2))
-/* Add TAG to Packets from DMA to PMAC (1) */
-#define LTQ_ES_PMAC_HD_CTL_TAG (0x1 << 1)
-#define LTQ_ES_PMAC_HD_CTL_TAG_VAL(val) (((val) & 0x1) << 1)
-#define LTQ_ES_PMAC_HD_CTL_TAG_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_TAG) >> 1) & 0x1)
-#define LTQ_ES_PMAC_HD_CTL_TAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_TAG) | (((val) & 0x1) << 1))
-/* ADD Header to Packets from DMA to PMAC (0) */
-#define LTQ_ES_PMAC_HD_CTL_ADD (0x1)
-#define LTQ_ES_PMAC_HD_CTL_ADD_VAL(val) (((val) & 0x1) << 0)
-#define LTQ_ES_PMAC_HD_CTL_ADD_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_ADD) >> 0) & 0x1)
-#define LTQ_ES_PMAC_HD_CTL_ADD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_ADD) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * PMAC Source Address Register 1
- ******************************************************************************/
-
-/* Source Address to be inserted as a part of the Ethernet header. (15:0) */
-#define LTQ_ES_PMAC_SA1_SA_47_32 (0xffff)
-#define LTQ_ES_PMAC_SA1_SA_47_32_VAL(val) (((val) & 0xffff) << 0)
-#define LTQ_ES_PMAC_SA1_SA_47_32_GET(val) ((((val) & LTQ_ES_PMAC_SA1_SA_47_32) >> 0) & 0xffff)
-#define LTQ_ES_PMAC_SA1_SA_47_32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_SA1_SA_47_32) | (((val) & 0xffff) << 0))
-
-/*******************************************************************************
- * PMAC Source Address Register 2
- ******************************************************************************/
-
-/* Source Address (31:0) */
-#define LTQ_ES_PMAC_SA2_SA_31_0 (0xFFFFFFFFL)
-#define LTQ_ES_PMAC_SA2_SA_31_0_VAL(val) (((val) & 0xFFFFFFFFL) << 0)
-#define LTQ_ES_PMAC_SA2_SA_31_0_GET(val) ((((val) & LTQ_ES_PMAC_SA2_SA_31_0) >> 0) & 0xFFFFFFFFL)
-#define LTQ_ES_PMAC_SA2_SA_31_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_SA2_SA_31_0) | (((val) & 0xFFFFFFFFL) << 0))
-
-/*******************************************************************************
- * PMAC Destination Address Register 1
- ******************************************************************************/
-
-/* Destination Address (15:0) */
-#define LTQ_ES_PMAC_DA1_DA_47_32 (0xffff)
-#define LTQ_ES_PMAC_DA1_DA_47_32_VAL(val) (((val) & 0xffff) << 0)
-#define LTQ_ES_PMAC_DA1_DA_47_32_GET(val) ((((val) & LTQ_ES_PMAC_DA1_DA_47_32) >> 0) & 0xffff)
-#define LTQ_ES_PMAC_DA1_DA_47_32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_DA1_DA_47_32) | (((val) & 0xffff) << 0))
-
-/*******************************************************************************
- * PMAC Destination Address Register 2
- ******************************************************************************/
-
-/* Destination Address to be inserted as a part of the Ethernet header. (31:0) */
-#define LTQ_ES_PMAC_DA2_DA_31_0 (0xFFFFFFFFL)
-#define LTQ_ES_PMAC_DA2_DA_31_0_VAL(val) (((val) & 0xFFFFFFFFL) << 0)
-#define LTQ_ES_PMAC_DA2_DA_31_0_GET(val) ((((val) & LTQ_ES_PMAC_DA2_DA_31_0) >> 0) & 0xFFFFFFFFL)
-#define LTQ_ES_PMAC_DA2_DA_31_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_DA2_DA_31_0) | (((val) & 0xFFFFFFFFL) << 0))
-
-/*******************************************************************************
- * PMAC VLAN Register
- ******************************************************************************/
-
-/* Priority to be inserted as a part of VLAN tag (15:13) */
-#define LTQ_ES_PMAC_VLAN_PRI (0x7 << 13)
-#define LTQ_ES_PMAC_VLAN_PRI_VAL(val) (((val) & 0x7) << 13)
-#define LTQ_ES_PMAC_VLAN_PRI_GET(val) ((((val) & LTQ_ES_PMAC_VLAN_PRI) >> 13) & 0x7)
-#define LTQ_ES_PMAC_VLAN_PRI_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_VLAN_PRI) | (((val) & 0x7) << 13))
-/* CFI bit to be inserted as a part of VLAN tag (12) */
-#define LTQ_ES_PMAC_VLAN_CFI (0x1 << 12)
-#define LTQ_ES_PMAC_VLAN_CFI_VAL(val) (((val) & 0x1) << 12)
-#define LTQ_ES_PMAC_VLAN_CFI_GET(val) ((((val) & LTQ_ES_PMAC_VLAN_CFI) >> 12) & 0x1)
-#define LTQ_ES_PMAC_VLAN_CFI_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_VLAN_CFI) | (((val) & 0x1) << 12))
-/* VLAN ID to be inserted as a part of VLAN tag (11:0) */
-#define LTQ_ES_PMAC_VLAN_VLAN_ID (0xfff)
-#define LTQ_ES_PMAC_VLAN_VLAN_ID_VAL(val) (((val) & 0xfff) << 0)
-#define LTQ_ES_PMAC_VLAN_VLAN_ID_GET(val) ((((val) & LTQ_ES_PMAC_VLAN_VLAN_ID) >> 0) & 0xfff)
-#define LTQ_ES_PMAC_VLAN_VLAN_ID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_VLAN_VLAN ID) | (((val) & 0xfff) << 0))
-
-/*******************************************************************************
- * PMAC TX IPG Counter Register
- ******************************************************************************/
-
-/* IPG Counter (7:0) */
-#define LTQ_ES_PMAC_TX_IPG_IPG_CNT (0xff)
-#define LTQ_ES_PMAC_TX_IPG_IPG_CNT_VAL(val) (((val) & 0xff) << 0)
-#define LTQ_ES_PMAC_TX_IPG_IPG_CNT_GET(val) ((((val) & LTQ_ES_PMAC_TX_IPG_IPG_CNT) >> 0) & 0xff)
-#define LTQ_ES_PMAC_TX_IPG_IPG_CNT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_TX_IPG_IPG_CNT) | (((val) & 0xff) << 0))
-
-/*******************************************************************************
- * PMAC RX IPG Counter Register
- ******************************************************************************/
-
-/* IPG Counter (7:0) */
-#define LTQ_ES_PMAC_RX_IPG_IPG_CNT (0xff)
-#define LTQ_ES_PMAC_RX_IPG_IPG_CNT_VAL(val) (((val) & 0xff) << 0)
-#define LTQ_ES_PMAC_RX_IPG_IPG_CNT_GET(val) ((((val) & LTQ_ES_PMAC_RX_IPG_IPG_CNT) >> 0) & 0xff)
-#define LTQ_ES_PMAC_RX_IPG_IPG_CNT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_RX_IPG_IPG_CNT) | (((val) & 0xff) << 0))
-
-/*******************************************************************************
- * Address Table Control 0 Register
- ******************************************************************************/
-
-/* Address [31:0] (31:0) */
-#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0 (0xFFFFFFFFL)
-#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0_VAL(val) (((val) & 0xFFFFFFFFL) << 0)
-#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0) >> 0) & 0xFFFFFFFFL)
-#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0) | (((val) & 0xFFFFFFFFL) << 0))
-
-/*******************************************************************************
- * Address Table Control 1 Register
- ******************************************************************************/
-
-/* Port Map (22:20) */
-#define LTQ_ES_ADR_TB_CTL1_REG_PMAP (0x7 << 20)
-#define LTQ_ES_ADR_TB_CTL1_REG_PMAP_VAL(val) (((val) & 0x7) << 20)
-#define LTQ_ES_ADR_TB_CTL1_REG_PMAP_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL1_REG_PMAP) >> 20) & 0x7)
-#define LTQ_ES_ADR_TB_CTL1_REG_PMAP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL1_REG_PMAP) | (((val) & 0x7) << 20))
-/* FID group (17:16) */
-#define LTQ_ES_ADR_TB_CTL1_REG_FID (0x3 << 16)
-#define LTQ_ES_ADR_TB_CTL1_REG_FID_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_ES_ADR_TB_CTL1_REG_FID_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL1_REG_FID) >> 16) & 0x3)
-#define LTQ_ES_ADR_TB_CTL1_REG_FID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL1_REG_FID) | (((val) & 0x3) << 16))
-/* Address [47:32] (15:0) */
-#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32 (0xffff)
-#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32_VAL(val) (((val) & 0xffff) << 0)
-#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32) >> 0) & 0xffff)
-#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32) | (((val) & 0xffff) << 0))
-
-/*******************************************************************************
- * Address Table Control 2 Register
- ******************************************************************************/
-
-/* Command (22:20) */
-#define LTQ_ES_ADR_TB_CTL2_REG_CMD (0x7 << 20)
-#define LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(val) (((val) & 0x7) << 20)
-#define LTQ_ES_ADR_TB_CTL2_REG_CMD_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_CMD) >> 20) & 0x7)
-#define LTQ_ES_ADR_TB_CTL2_REG_CMD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_CMD) | (((val) & 0x7) << 20))
-/* Access Control (19:16) */
-#define LTQ_ES_ADR_TB_CTL2_REG_AC (0xf << 16)
-#define LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(val) (((val) & 0xf) << 16)
-#define LTQ_ES_ADR_TB_CTL2_REG_AC_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_AC) >> 16) & 0xf)
-#define LTQ_ES_ADR_TB_CTL2_REG_AC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_AC) | (((val) & 0xf) << 16))
-/* Info Type: Static address (12) */
-#define LTQ_ES_ADR_TB_CTL2_REG_INFOT (0x1 << 12)
-#define LTQ_ES_ADR_TB_CTL2_REG_INFOT_VAL(val) (((val) & 0x1) << 12)
-#define LTQ_ES_ADR_TB_CTL2_REG_INFOT_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_INFOT) >> 12) & 0x1)
-#define LTQ_ES_ADR_TB_CTL2_REG_INFOT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_INFOT) | (((val) & 0x1) << 12))
-/* Info_Ctrl/Age Timer (10:0) */
-#define LTQ_ES_ADR_TB_CTL2_REG_ITAT (0x7ff)
-#define LTQ_ES_ADR_TB_CTL2_REG_ITAT_VAL(val) (((val) & 0x7ff) << 0)
-#define LTQ_ES_ADR_TB_CTL2_REG_ITAT_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_ITAT) >> 0) & 0x7ff)
-#define LTQ_ES_ADR_TB_CTL2_REG_ITAT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_ITAT) | (((val) & 0x7ff) << 0))
-
-/*******************************************************************************
- * Address Table Status 0 Register
- ******************************************************************************/
-
-/* Address [31:0] (31:0) */
-#define LTQ_ES_ADR_TB_ST0_REG_ADDRS31_0 (0xFFFFFFFFL)
-#define LTQ_ES_ADR_TB_ST0_REG_ADDRS31_0_GET(val) ((((val) & LTQ_ES_ADR_TB_ST0_REG_ADDRS31_0) >> 0) & 0xFFFFFFFFL)
-
-/*******************************************************************************
- * Address Table Status 1 Register
- ******************************************************************************/
-
-/* Port Map (22:20) */
-#define LTQ_ES_ADR_TB_ST1_REG_PMAPS (0x7 << 20)
-#define LTQ_ES_ADR_TB_ST1_REG_PMAPS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST1_REG_PMAPS) >> 20) & 0x7)
-/* FID group (17:16) */
-#define LTQ_ES_ADR_TB_ST1_REG_FIDS (0x3 << 16)
-#define LTQ_ES_ADR_TB_ST1_REG_FIDS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST1_REG_FIDS) >> 16) & 0x3)
-/* Address [47:32] (15:0) */
-#define LTQ_ES_ADR_TB_ST1_REG_ADDRS47_32 (0xffff)
-#define LTQ_ES_ADR_TB_ST1_REG_ADDRS47_32_GET(val) ((((val) & LTQ_ES_ADR_TB_ST1_REG_ADDRS47_32) >> 0) & 0xffff)
-
-/*******************************************************************************
- * Address Table Status 2 Register
- ******************************************************************************/
-
-/* Busy (31) */
-#define LTQ_ES_ADR_TB_ST2_REG_BUSY (0x1 << 31)
-#define LTQ_ES_ADR_TB_ST2_REG_BUSY_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_BUSY) >> 31) & 0x1)
-/* Result (30:28) */
-#define LTQ_ES_ADR_TB_ST2_REG_RSLT (0x7 << 28)
-#define LTQ_ES_ADR_TB_ST2_REG_RSLT_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_RSLT) >> 28) & 0x7)
-/* Command (22:20) */
-#define LTQ_ES_ADR_TB_ST2_REG_CMD (0x7 << 20)
-#define LTQ_ES_ADR_TB_ST2_REG_CMD_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_CMD) >> 20) & 0x7)
-/* Access Control (19:16) */
-#define LTQ_ES_ADR_TB_ST2_REG_AC (0xf << 16)
-#define LTQ_ES_ADR_TB_ST2_REG_AC_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_AC) >> 16) & 0xf)
-/* Bad Status (14) */
-#define LTQ_ES_ADR_TB_ST2_REG_BAD (0x1 << 14)
-#define LTQ_ES_ADR_TB_ST2_REG_BAD_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_BAD) >> 14) & 0x1)
-/* Occupy (13) */
-#define LTQ_ES_ADR_TB_ST2_REG_OCP (0x1 << 13)
-#define LTQ_ES_ADR_TB_ST2_REG_OCP_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_OCP) >> 13) & 0x1)
-/* Info Type: Static address (12) */
-#define LTQ_ES_ADR_TB_ST2_REG_INFOTS (0x1 << 12)
-#define LTQ_ES_ADR_TB_ST2_REG_INFOTS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_INFOTS) >> 12) & 0x1)
-/* Info_Ctrl/Age Timer Status (10:0) */
-#define LTQ_ES_ADR_TB_ST2_REG_ITATS (0x7ff)
-#define LTQ_ES_ADR_TB_ST2_REG_ITATS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_ITATS) >> 0) & 0x7ff)
-
-/*******************************************************************************
- * RMON Counter Control Register
- ******************************************************************************/
-
-/* Reserved (31:12) */
-#define LTQ_ES_RMON_CTL_REG_RES (0xfffff << 12)
-#define LTQ_ES_RMON_CTL_REG_RES_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_RES) >> 12) & 0xfffff)
-/* Busy/Access Start (11) */
-#define LTQ_ES_RMON_CTL_REG_BAS (0x1 << 11)
-#define LTQ_ES_RMON_CTL_REG_BAS_VAL(val) (((val) & 0x1) << 11)
-#define LTQ_ES_RMON_CTL_REG_BAS_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_BAS) >> 11) & 0x1)
-#define LTQ_ES_RMON_CTL_REG_BAS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_BAS) | (((val) & 0x1) << 11))
-/* Command for access counter (10:9) */
-#define LTQ_ES_RMON_CTL_REG_CAC (0x3 << 9)
-#define LTQ_ES_RMON_CTL_REG_CAC_VAL(val) (((val) & 0x3) << 9)
-#define LTQ_ES_RMON_CTL_REG_CAC_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_CAC) >> 9) & 0x3)
-#define LTQ_ES_RMON_CTL_REG_CAC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_CAC) | (((val) & 0x3) << 9))
-/* Port (8:6) */
-#define LTQ_ES_RMON_CTL_REG_PORTC (0x7 << 6)
-#define LTQ_ES_RMON_CTL_REG_PORTC_VAL(val) (((val) & 0x7) << 6)
-#define LTQ_ES_RMON_CTL_REG_PORTC_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_PORTC) >> 6) & 0x7)
-#define LTQ_ES_RMON_CTL_REG_PORTC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_PORTC) | (((val) & 0x7) << 6))
-/* Counter Offset (5:0) */
-#define LTQ_ES_RMON_CTL_REG_OFFSET (0x3f)
-#define LTQ_ES_RMON_CTL_REG_OFFSET_VAL(val) (((val) & 0x3f) << 0)
-#define LTQ_ES_RMON_CTL_REG_OFFSET_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_OFFSET) >> 0) & 0x3f)
-#define LTQ_ES_RMON_CTL_REG_OFFSET_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_OFFSET) | (((val) & 0x3f) << 0))
-
-/*******************************************************************************
- * RMON Counter Status Register
- ******************************************************************************/
-
-/* Counter [31:0] or Counter[63:32] for byte count (31:0) */
-#define LTQ_ES_RMON_ST_REG_COUNTER (0xFFFFFFFFL)
-#define LTQ_ES_RMON_ST_REG_COUNTER_GET(val) ((((val) & LTQ_ES_RMON_ST_REG_COUNTER) >> 0) & 0xFFFFFFFFL)
-
-/*******************************************************************************
- * MDIO Indirect Access Control
- ******************************************************************************/
-
-/* The Write Data to the MDIO register (31:16) */
-#define LTQ_ES_MDIO_CTL_REG_WD (0xffff << 16)
-#define LTQ_ES_MDIO_CTL_REG_WD_VAL(val) (((val) & 0xffff) << 16)
-#define LTQ_ES_MDIO_CTL_REG_WD_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_WD) >> 16) & 0xffff)
-#define LTQ_ES_MDIO_CTL_REG_WD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_WD) | (((val) & 0xffff) << 16))
-/* Busy state (15) */
-#define LTQ_ES_MDIO_CTL_REG_MBUSY (0x1 << 15)
-#define LTQ_ES_MDIO_CTL_REG_MBUSY_VAL(val) (((val) & 0x1) << 15)
-#define LTQ_ES_MDIO_CTL_REG_MBUSY_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_MBUSY) >> 15) & 0x1)
-#define LTQ_ES_MDIO_CTL_REG_MBUSY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_MBUSY) | (((val) & 0x1) << 15))
-/* Reserved (14:12) */
-#define LTQ_ES_MDIO_CTL_REG_RES (0x7 << 12)
-#define LTQ_ES_MDIO_CTL_REG_RES_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_RES) >> 12) & 0x7)
-/* Operation Code (11:10) */
-#define LTQ_ES_MDIO_CTL_REG_OP (0x3 << 10)
-#define LTQ_ES_MDIO_CTL_REG_OP_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_MDIO_CTL_REG_OP_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_OP) >> 10) & 0x3)
-#define LTQ_ES_MDIO_CTL_REG_OP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_OP) | (((val) & 0x3) << 10))
-/* PHY Address (9:5) */
-#define LTQ_ES_MDIO_CTL_REG_PHYAD (0x1f << 5)
-#define LTQ_ES_MDIO_CTL_REG_PHYAD_VAL(val) (((val) & 0x1f) << 5)
-#define LTQ_ES_MDIO_CTL_REG_PHYAD_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_PHYAD) >> 5) & 0x1f)
-#define LTQ_ES_MDIO_CTL_REG_PHYAD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_PHYAD) | (((val) & 0x1f) << 5))
-/* Register Address (4:0) */
-#define LTQ_ES_MDIO_CTL_REG_REGAD (0x1f)
-#define LTQ_ES_MDIO_CTL_REG_REGAD_VAL(val) (((val) & 0x1f) << 0)
-#define LTQ_ES_MDIO_CTL_REG_REGAD_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_REGAD) >> 0) & 0x1f)
-#define LTQ_ES_MDIO_CTL_REG_REGAD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_REGAD) | (((val) & 0x1f) << 0))
-
-/*******************************************************************************
- * MDIO Indirect Read Data
- ******************************************************************************/
-
-/* Reserved (31:16) */
-#define LTQ_ES_MDIO_DATA_REG_RES (0xffff << 16)
-#define LTQ_ES_MDIO_DATA_REG_RES_GET(val) ((((val) & LTQ_ES_MDIO_DATA_REG_RES) >> 16) & 0xffff)
-/* The Read Data (15:0) */
-#define LTQ_ES_MDIO_DATA_REG_RD (0xffff)
-#define LTQ_ES_MDIO_DATA_REG_RD_GET(val) ((((val) & LTQ_ES_MDIO_DATA_REG_RD) >> 0) & 0xffff)
-
-/*******************************************************************************
- * Type Filter Action
- ******************************************************************************/
-
-/* Destination Queue for Type Filter 7 (31:30) */
-#define LTQ_ES_TP_FLT_ACT_REG_QATF7 (0x3 << 30)
-#define LTQ_ES_TP_FLT_ACT_REG_QATF7_VAL(val) (((val) & 0x3) << 30)
-#define LTQ_ES_TP_FLT_ACT_REG_QATF7_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QATF7) >> 30) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_QATF7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QATF7) | (((val) & 0x3) << 30))
-/* Destination Queue for Type Filter 6 (29:28) */
-#define LTQ_ES_TP_FLT_ACT_REG_QATF6 (0x3 << 28)
-#define LTQ_ES_TP_FLT_ACT_REG_QATF6_VAL(val) (((val) & 0x3) << 28)
-#define LTQ_ES_TP_FLT_ACT_REG_QATF6_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QATF6) >> 28) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_QATF6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QATF6) | (((val) & 0x3) << 28))
-/* Destination Queue for Type Filter 5 (27:26) */
-#define LTQ_ES_TP_FLT_ACT_REG_QTF5 (0x3 << 26)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF5_VAL(val) (((val) & 0x3) << 26)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF5_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF5) >> 26) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF5) | (((val) & 0x3) << 26))
-/* Destination Queue for Type Filter 4 (25:24) */
-#define LTQ_ES_TP_FLT_ACT_REG_QTF4 (0x3 << 24)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF4_VAL(val) (((val) & 0x3) << 24)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF4_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF4) >> 24) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF4) | (((val) & 0x3) << 24))
-/* Destination Queue for Type Filter 3 (23:22) */
-#define LTQ_ES_TP_FLT_ACT_REG_QTF3 (0x3 << 22)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF3_VAL(val) (((val) & 0x3) << 22)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF3_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF3) >> 22) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF3) | (((val) & 0x3) << 22))
-/* Destination Queue for Type Filter 2 (21:20) */
-#define LTQ_ES_TP_FLT_ACT_REG_QTF2 (0x3 << 20)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF2_VAL(val) (((val) & 0x3) << 20)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF2_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF2) >> 20) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF2) | (((val) & 0x3) << 20))
-/* Destination Queue for Type Filter 1 (19:18) */
-#define LTQ_ES_TP_FLT_ACT_REG_QTF1 (0x3 << 18)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF1_VAL(val) (((val) & 0x3) << 18)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF1_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF1) >> 18) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF1) | (((val) & 0x3) << 18))
-/* Destination Queue for Type Filter 0 (17:16) */
-#define LTQ_ES_TP_FLT_ACT_REG_QTF0 (0x3 << 16)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF0_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF0_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF0) >> 16) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_QTF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF0) | (((val) & 0x3) << 16))
-/* Action for Type Filter 7 (15:14) */
-#define LTQ_ES_TP_FLT_ACT_REG_ATF7 (0x3 << 14)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF7_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF7_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF7) >> 14) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF7) | (((val) & 0x3) << 14))
-/* Action for Type Filter 6 (13:12) */
-#define LTQ_ES_TP_FLT_ACT_REG_ATF6 (0x3 << 12)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF6_VAL(val) (((val) & 0x3) << 12)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF6_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF6) >> 12) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF6) | (((val) & 0x3) << 12))
-/* Action for Type Filter 5 (11:10) */
-#define LTQ_ES_TP_FLT_ACT_REG_ATF5 (0x3 << 10)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF5_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF5_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF5) >> 10) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF5) | (((val) & 0x3) << 10))
-/* Action for Type Filter 4 (9:8) */
-#define LTQ_ES_TP_FLT_ACT_REG_ATF4 (0x3 << 8)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF4_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF4_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF4) >> 8) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF4) | (((val) & 0x3) << 8))
-/* Action for Type Filter 3 (7:6) */
-#define LTQ_ES_TP_FLT_ACT_REG_ATF3 (0x3 << 6)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF3_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF3_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF3) >> 6) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF3) | (((val) & 0x3) << 6))
-/* Action for Type Filter 2 (5:4) */
-#define LTQ_ES_TP_FLT_ACT_REG_ATF2 (0x3 << 4)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF2_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF2_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF2) >> 4) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF2) | (((val) & 0x3) << 4))
-/* Action for Type Filter 1 (3:2) */
-#define LTQ_ES_TP_FLT_ACT_REG_ATF1 (0x3 << 2)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF1_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF1_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF1) >> 2) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF1) | (((val) & 0x3) << 2))
-/* Action for Type Filter 0 (1:0) */
-#define LTQ_ES_TP_FLT_ACT_REG_ATF0 (0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF0_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF0_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF0) >> 0) & 0x3)
-#define LTQ_ES_TP_FLT_ACT_REG_ATF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF0) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * Protocol Filter Action
- ******************************************************************************/
-
-/* Action for Protocol Filter 7 (15:14) */
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7 (0x3 << 14)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF7) >> 14) & 0x3)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF7) | (((val) & 0x3) << 14))
-/* Action for Protocol Filter 6 (13:12) */
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6 (0x3 << 12)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6_VAL(val) (((val) & 0x3) << 12)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF6) >> 12) & 0x3)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF6) | (((val) & 0x3) << 12))
-/* Action for Protocol Filter 5 (11:10) */
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5 (0x3 << 10)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF5) >> 10) & 0x3)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF5) | (((val) & 0x3) << 10))
-/* Action for Protocol Filter 4 (9:8) */
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4 (0x3 << 8)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF4) >> 8) & 0x3)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF4) | (((val) & 0x3) << 8))
-/* Action for Protocol Filter 3 (7:6) */
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3 (0x3 << 6)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF3) >> 6) & 0x3)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF3) | (((val) & 0x3) << 6))
-/* Action for Protocol Filter 2 (5:4) */
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2 (0x3 << 4)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF2) >> 4) & 0x3)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF2) | (((val) & 0x3) << 4))
-/* Action for Protocol Filter 1 (3:2) */
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1 (0x3 << 2)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF1) >> 2) & 0x3)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF1) | (((val) & 0x3) << 2))
-/* Action for Protocol Filter 0 (1:0) */
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0 (0x3)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF0) >> 0) & 0x3)
-#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF0) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * VLAN Filter 0
- ******************************************************************************/
-
-/* Res (31:24) */
-#define LTQ_ES_VLAN_FLT0_REG_RES (0xff << 24)
-#define LTQ_ES_VLAN_FLT0_REG_RES_VAL(val) (((val) & 0xff) << 24)
-#define LTQ_ES_VLAN_FLT0_REG_RES_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_RES) >> 24) & 0xff)
-#define LTQ_ES_VLAN_FLT0_REG_RES_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_RES) | (((val) & 0xff) << 24))
-/* FID (23:22) */
-#define LTQ_ES_VLAN_FLT0_REG_FID (0x3 << 22)
-#define LTQ_ES_VLAN_FLT0_REG_FID_VAL(val) (((val) & 0x3) << 22)
-#define LTQ_ES_VLAN_FLT0_REG_FID_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_FID) >> 22) & 0x3)
-#define LTQ_ES_VLAN_FLT0_REG_FID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_FID) | (((val) & 0x3) << 22))
-/* Tagged Member (21:19) */
-#define LTQ_ES_VLAN_FLT0_REG_TM (0x7 << 19)
-#define LTQ_ES_VLAN_FLT0_REG_TM_VAL(val) (((val) & 0x7) << 19)
-#define LTQ_ES_VLAN_FLT0_REG_TM_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_TM) >> 19) & 0x7)
-#define LTQ_ES_VLAN_FLT0_REG_TM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_TM) | (((val) & 0x7) << 19))
-/* Member (18:16) */
-#define LTQ_ES_VLAN_FLT0_REG_M (0x7 << 16)
-#define LTQ_ES_VLAN_FLT0_REG_M_VAL(val) (((val) & 0x7) << 16)
-#define LTQ_ES_VLAN_FLT0_REG_M_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_M) >> 16) & 0x7)
-#define LTQ_ES_VLAN_FLT0_REG_M_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_M) | (((val) & 0x7) << 16))
-/* VLAN_Valid (15) */
-#define LTQ_ES_VLAN_FLT0_REG_VV (0x1 << 15)
-#define LTQ_ES_VLAN_FLT0_REG_VV_VAL(val) (((val) & 0x1) << 15)
-#define LTQ_ES_VLAN_FLT0_REG_VV_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_VV) >> 15) & 0x1)
-#define LTQ_ES_VLAN_FLT0_REG_VV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_VV) | (((val) & 0x1) << 15))
-/* VLAN PRI (14:12) */
-#define LTQ_ES_VLAN_FLT0_REG_VP (0x7 << 12)
-#define LTQ_ES_VLAN_FLT0_REG_VP_VAL(val) (((val) & 0x7) << 12)
-#define LTQ_ES_VLAN_FLT0_REG_VP_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_VP) >> 12) & 0x7)
-#define LTQ_ES_VLAN_FLT0_REG_VP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_VP) | (((val) & 0x7) << 12))
-/* VID (11:0) */
-#define LTQ_ES_VLAN_FLT0_REG_VID (0xfff)
-#define LTQ_ES_VLAN_FLT0_REG_VID_VAL(val) (((val) & 0xfff) << 0)
-#define LTQ_ES_VLAN_FLT0_REG_VID_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_VID) >> 0) & 0xfff)
-#define LTQ_ES_VLAN_FLT0_REG_VID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_VID) | (((val) & 0xfff) << 0))
-
-/*******************************************************************************
- * Type Filter 10
- ******************************************************************************/
-
-/* Value 1 Compared with Ether-Type (31:16) */
-#define LTQ_ES_TP_FLT10_REG_VCET1 (0xffff << 16)
-#define LTQ_ES_TP_FLT10_REG_VCET1_VAL(val) (((val) & 0xffff) << 16)
-#define LTQ_ES_TP_FLT10_REG_VCET1_GET(val) ((((val) & LTQ_ES_TP_FLT10_REG_VCET1) >> 16) & 0xffff)
-#define LTQ_ES_TP_FLT10_REG_VCET1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT10_REG_VCET1) | (((val) & 0xffff) << 16))
-/* Value 0 Compared with Ether-Type (15:0) */
-#define LTQ_ES_TP_FLT10_REG_VCET0 (0xffff)
-#define LTQ_ES_TP_FLT10_REG_VCET0_VAL(val) (((val) & 0xffff) << 0)
-#define LTQ_ES_TP_FLT10_REG_VCET0_GET(val) ((((val) & LTQ_ES_TP_FLT10_REG_VCET0) >> 0) & 0xffff)
-#define LTQ_ES_TP_FLT10_REG_VCET0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT10_REG_VCET0) | (((val) & 0xffff) << 0))
-
-/*******************************************************************************
- * DiffServMapping 0
- ******************************************************************************/
-
-/* Priority Queue F (31:30) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQF (0x3 << 30)
-#define LTQ_ES_DFSRV_MAP0_REG_PQF_VAL(val) (((val) & 0x3) << 30)
-#define LTQ_ES_DFSRV_MAP0_REG_PQF_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQF) >> 30) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQF_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQF) | (((val) & 0x3) << 30))
-/* Priority Queue E (29:28) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQE (0x3 << 28)
-#define LTQ_ES_DFSRV_MAP0_REG_PQE_VAL(val) (((val) & 0x3) << 28)
-#define LTQ_ES_DFSRV_MAP0_REG_PQE_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQE) >> 28) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQE) | (((val) & 0x3) << 28))
-/* Priority Queue D (27:26) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQD (0x3 << 26)
-#define LTQ_ES_DFSRV_MAP0_REG_PQD_VAL(val) (((val) & 0x3) << 26)
-#define LTQ_ES_DFSRV_MAP0_REG_PQD_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQD) >> 26) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQD) | (((val) & 0x3) << 26))
-/* Priority Queue C (25:24) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQC (0x3 << 24)
-#define LTQ_ES_DFSRV_MAP0_REG_PQC_VAL(val) (((val) & 0x3) << 24)
-#define LTQ_ES_DFSRV_MAP0_REG_PQC_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQC) >> 24) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQC) | (((val) & 0x3) << 24))
-/* Priority Queue B (23:22) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQB (0x3 << 22)
-#define LTQ_ES_DFSRV_MAP0_REG_PQB_VAL(val) (((val) & 0x3) << 22)
-#define LTQ_ES_DFSRV_MAP0_REG_PQB_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQB) >> 22) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQB_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQB) | (((val) & 0x3) << 22))
-/* Priority Queue A (21:20) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQA (0x3 << 20)
-#define LTQ_ES_DFSRV_MAP0_REG_PQA_VAL(val) (((val) & 0x3) << 20)
-#define LTQ_ES_DFSRV_MAP0_REG_PQA_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQA) >> 20) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQA) | (((val) & 0x3) << 20))
-/* Priority Queue 9 (19:18) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQ9 (0x3 << 18)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ9_VAL(val) (((val) & 0x3) << 18)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ9_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ9) >> 18) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ9_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ9) | (((val) & 0x3) << 18))
-/* Priority Queue 8 (17:16) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQ8 (0x3 << 16)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ8_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ8_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ8) >> 16) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ8_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ8) | (((val) & 0x3) << 16))
-/* Priority Queue 7 (15:14) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQ7 (0x3 << 14)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ7_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ7_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ7) >> 14) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ7) | (((val) & 0x3) << 14))
-/* Priority Queue 6 (13:12) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQ6 (0x3 << 12)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ6_VAL(val) (((val) & 0x3) << 12)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ6_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ6) >> 12) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ6) | (((val) & 0x3) << 12))
-/* Priority Queue 5 (11:10) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQ5 (0x3 << 10)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ5_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ5_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ5) >> 10) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ5) | (((val) & 0x3) << 10))
-/* Priority Queue 4 (9:8) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQ4 (0x3 << 8)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ4_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ4_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ4) >> 8) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ4) | (((val) & 0x3) << 8))
-/* Priority Queue 3 (7:6) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQ3 (0x3 << 6)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ3_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ3_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ3) >> 6) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ3) | (((val) & 0x3) << 6))
-/* Priority Queue 2 (5:4) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQ2 (0x3 << 4)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ2_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ2_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ2) >> 4) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ2) | (((val) & 0x3) << 4))
-/* Priority Queue 1 (3:2) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQ1 (0x3 << 2)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ1_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ1_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ1) >> 2) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ1) | (((val) & 0x3) << 2))
-/* Priority Queue 0 (1:0) */
-#define LTQ_ES_DFSRV_MAP0_REG_PQ0 (0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ0_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ0_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ0) >> 0) & 0x3)
-#define LTQ_ES_DFSRV_MAP0_REG_PQ0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ0) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * DiffServMapping 1
- ******************************************************************************/
-
-/* Priority Queue 1F (31:30) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1F (0x3 << 30)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1F_VAL(val) (((val) & 0x3) << 30)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1F_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1F) >> 30) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1F_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1F) | (((val) & 0x3) << 30))
-/* Priority Queue 1E (29:28) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1E (0x3 << 28)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1E_VAL(val) (((val) & 0x3) << 28)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1E_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1E) >> 28) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1E_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1E) | (((val) & 0x3) << 28))
-/* Priority Queue 1D (27:26) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1D (0x3 << 26)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1D_VAL(val) (((val) & 0x3) << 26)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1D_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1D) >> 26) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1D_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1D) | (((val) & 0x3) << 26))
-/* Priority Queue 1C (25:24) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1C (0x3 << 24)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1C_VAL(val) (((val) & 0x3) << 24)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1C_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1C) >> 24) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1C_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1C) | (((val) & 0x3) << 24))
-/* Priority Queue 1B (23:22) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1B (0x3 << 22)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1B_VAL(val) (((val) & 0x3) << 22)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1B_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1B) >> 22) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1B) | (((val) & 0x3) << 22))
-/* Priority Queue 1A (21:20) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1A (0x3 << 20)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1A_VAL(val) (((val) & 0x3) << 20)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1A_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1A) >> 20) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ1A_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1A) | (((val) & 0x3) << 20))
-/* Priority Queue 19 (19:18) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ19 (0x3 << 18)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ19_VAL(val) (((val) & 0x3) << 18)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ19_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ19) >> 18) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ19_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ19) | (((val) & 0x3) << 18))
-/* Priority Queue 18 (17:16) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ18 (0x3 << 16)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ18_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ18_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ18) >> 16) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ18_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ18) | (((val) & 0x3) << 16))
-/* Priority Queue 17 (15:14) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ17 (0x3 << 14)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ17_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ17_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ17) >> 14) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ17_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ17) | (((val) & 0x3) << 14))
-/* Priority Queue 16 (13:12) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ16 (0x3 << 12)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ16_VAL(val) (((val) & 0x3) << 12)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ16_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ16) >> 12) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ16_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ16) | (((val) & 0x3) << 12))
-/* Priority Queue 15 (11:10) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ15 (0x3 << 10)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ15_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ15_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ15) >> 10) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ15_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ15) | (((val) & 0x3) << 10))
-/* Priority Queue 14 (9:8) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ14 (0x3 << 8)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ14_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ14_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ14) >> 8) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ14_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ14) | (((val) & 0x3) << 8))
-/* Priority Queue 13 (7:6) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ13 (0x3 << 6)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ13_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ13_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ13) >> 6) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ13_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ13) | (((val) & 0x3) << 6))
-/* Priority Queue 12 (5:4) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ12 (0x3 << 4)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ12_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ12_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ12) >> 4) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ12_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ12) | (((val) & 0x3) << 4))
-/* Priority Queue 11 (3:2) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ11 (0x3 << 2)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ11_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ11_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ11) >> 2) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ11_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ11) | (((val) & 0x3) << 2))
-/* Priority Queue 10 (1:0) */
-#define LTQ_ES_DFSRV_MAP1_REG_PQ10 (0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ10_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ10_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ10) >> 0) & 0x3)
-#define LTQ_ES_DFSRV_MAP1_REG_PQ10_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ10) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * DiffServMapping 2
- ******************************************************************************/
-
-/* Priority Queue 2F (31:30) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2F (0x3 << 30)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2F_VAL(val) (((val) & 0x3) << 30)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2F_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2F) >> 30) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2F_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2F) | (((val) & 0x3) << 30))
-/* Priority Queue 2E (29:28) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2E (0x3 << 28)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2E_VAL(val) (((val) & 0x3) << 28)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2E_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2E) >> 28) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2E_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2E) | (((val) & 0x3) << 28))
-/* Priority Queue 2D (27:26) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2D (0x3 << 26)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2D_VAL(val) (((val) & 0x3) << 26)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2D_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2D) >> 26) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2D_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2D) | (((val) & 0x3) << 26))
-/* Priority Queue 2C (25:24) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2C (0x3 << 24)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2C_VAL(val) (((val) & 0x3) << 24)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2C_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2C) >> 24) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2C_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2C) | (((val) & 0x3) << 24))
-/* Priority Queue 2B (23:22) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2B (0x3 << 22)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2B_VAL(val) (((val) & 0x3) << 22)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2B_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2B) >> 22) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2B) | (((val) & 0x3) << 22))
-/* Priority Queue 2A (21:20) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2A (0x3 << 20)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2A_VAL(val) (((val) & 0x3) << 20)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2A_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2A) >> 20) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ2A_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2A) | (((val) & 0x3) << 20))
-/* Priority Queue 29 (19:18) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ29 (0x3 << 18)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ29_VAL(val) (((val) & 0x3) << 18)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ29_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ29) >> 18) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ29_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ29) | (((val) & 0x3) << 18))
-/* Priority Queue 28 (17:16) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ28 (0x3 << 16)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ28_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ28_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ28) >> 16) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ28_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ28) | (((val) & 0x3) << 16))
-/* Priority Queue 27 (15:14) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ27 (0x3 << 14)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ27_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ27_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ27) >> 14) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ27_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ27) | (((val) & 0x3) << 14))
-/* Priority Queue 26 (13:12) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ26 (0x3 << 12)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ26_VAL(val) (((val) & 0x3) << 12)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ26_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ26) >> 12) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ26_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ26) | (((val) & 0x3) << 12))
-/* Priority Queue 25 (11:10) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ25 (0x3 << 10)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ25_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ25_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ25) >> 10) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ25_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ25) | (((val) & 0x3) << 10))
-/* Priority Queue 24 (9:8) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ24 (0x3 << 8)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ24_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ24_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ24) >> 8) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ24_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ24) | (((val) & 0x3) << 8))
-/* Priority Queue 23 (7:6) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ23 (0x3 << 6)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ23_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ23_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ23) >> 6) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ23_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ23) | (((val) & 0x3) << 6))
-/* Priority Queue 22 (5:4) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ22 (0x3 << 4)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ22_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ22_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ22) >> 4) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ22_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ22) | (((val) & 0x3) << 4))
-/* Priority Queue 21 (3:2) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ21 (0x3 << 2)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ21_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ21_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ21) >> 2) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ21_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ21) | (((val) & 0x3) << 2))
-/* Priority Queue 20 (1:0) */
-#define LTQ_ES_DFSRV_MAP2_REG_PQ20 (0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ20_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ20_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ20) >> 0) & 0x3)
-#define LTQ_ES_DFSRV_MAP2_REG_PQ20_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ20) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * DiffServMapping 3
- ******************************************************************************/
-
-/* Priority Queue 3F (31:30) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3F (0x3 << 30)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3F_VAL(val) (((val) & 0x3) << 30)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3F_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3F) >> 30) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3F_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3F) | (((val) & 0x3) << 30))
-/* Priority Queue 3E (29:28) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3E (0x3 << 28)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3E_VAL(val) (((val) & 0x3) << 28)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3E_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3E) >> 28) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3E_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3E) | (((val) & 0x3) << 28))
-/* Priority Queue 3D (27:26) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3D (0x3 << 26)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3D_VAL(val) (((val) & 0x3) << 26)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3D_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3D) >> 26) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3D_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3D) | (((val) & 0x3) << 26))
-/* Priority Queue 3C (25:24) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3C (0x3 << 24)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3C_VAL(val) (((val) & 0x3) << 24)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3C_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3C) >> 24) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3C_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3C) | (((val) & 0x3) << 24))
-/* Priority Queue 3B (23:22) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3B (0x3 << 22)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3B_VAL(val) (((val) & 0x3) << 22)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3B_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3B) >> 22) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3B) | (((val) & 0x3) << 22))
-/* Priority Queue 3A (21:20) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3A (0x3 << 20)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3A_VAL(val) (((val) & 0x3) << 20)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3A_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3A) >> 20) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ3A_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3A) | (((val) & 0x3) << 20))
-/* Priority Queue 39 (19:18) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ39 (0x3 << 18)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ39_VAL(val) (((val) & 0x3) << 18)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ39_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ39) >> 18) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ39_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ39) | (((val) & 0x3) << 18))
-/* Priority Queue 38 (17:16) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ38 (0x3 << 16)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ38_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ38_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ38) >> 16) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ38_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ38) | (((val) & 0x3) << 16))
-/* Priority Queue 37 (15:14) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ37 (0x3 << 14)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ37_VAL(val) (((val) & 0x3) << 14)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ37_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ37) >> 14) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ37_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ37) | (((val) & 0x3) << 14))
-/* Priority Queue 36 (13:12) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ36 (0x3 << 12)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ36_VAL(val) (((val) & 0x3) << 12)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ36_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ36) >> 12) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ36_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ36) | (((val) & 0x3) << 12))
-/* Priority Queue 35 (11:10) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ35 (0x3 << 10)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ35_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ35_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ35) >> 10) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ35_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ35) | (((val) & 0x3) << 10))
-/* Priority Queue 34 (9:8) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ34 (0x3 << 8)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ34_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ34_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ34) >> 8) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ34_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ34) | (((val) & 0x3) << 8))
-/* Priority Queue 33 (7:6) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ33 (0x3 << 6)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ33_VAL(val) (((val) & 0x3) << 6)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ33_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ33) >> 6) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ33_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ33) | (((val) & 0x3) << 6))
-/* Priority Queue 32 (5:4) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ32 (0x3 << 4)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ32_VAL(val) (((val) & 0x3) << 4)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ32_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ32) >> 4) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ32) | (((val) & 0x3) << 4))
-/* Priority Queue 31 (3:2) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ31 (0x3 << 2)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ31_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ31_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ31) >> 2) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ31_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ31) | (((val) & 0x3) << 2))
-/* Priority Queue 30 (1:0) */
-#define LTQ_ES_DFSRV_MAP3_REG_PQ30 (0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ30_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ30_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ30) >> 0) & 0x3)
-#define LTQ_ES_DFSRV_MAP3_REG_PQ30_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ30) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * TCP/UDP Port Filter 0
- ******************************************************************************/
-
-/* Reserved (31:30) */
-#define LTQ_ES_TCP_PF0_REG_RES (0x3 << 30)
-#define LTQ_ES_TCP_PF0_REG_RES_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_RES) >> 30) & 0x3)
-/* Action for TCP/UDP Port Filter 0 (29:28) */
-#define LTQ_ES_TCP_PF0_REG_ATUF0 (0x3 << 28)
-#define LTQ_ES_TCP_PF0_REG_ATUF0_VAL(val) (((val) & 0x3) << 28)
-#define LTQ_ES_TCP_PF0_REG_ATUF0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_ATUF0) >> 28) & 0x3)
-#define LTQ_ES_TCP_PF0_REG_ATUF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_ATUF0) | (((val) & 0x3) << 28))
-/* TCP/UDP PRI for TCP/UDP Port Filter 0 (27:26) */
-#define LTQ_ES_TCP_PF0_REG_TUPF0 (0x3 << 26)
-#define LTQ_ES_TCP_PF0_REG_TUPF0_VAL(val) (((val) & 0x3) << 26)
-#define LTQ_ES_TCP_PF0_REG_TUPF0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_TUPF0) >> 26) & 0x3)
-#define LTQ_ES_TCP_PF0_REG_TUPF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_TUPF0) | (((val) & 0x3) << 26))
-/* Compare TCP/UDP Source Port or Destination Port (25:24) */
-#define LTQ_ES_TCP_PF0_REG_COMP0 (0x3 << 24)
-#define LTQ_ES_TCP_PF0_REG_COMP0_VAL(val) (((val) & 0x3) << 24)
-#define LTQ_ES_TCP_PF0_REG_COMP0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_COMP0) >> 24) & 0x3)
-#define LTQ_ES_TCP_PF0_REG_COMP0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_COMP0) | (((val) & 0x3) << 24))
-/* Port Range in TCP/UDP (23:16) */
-#define LTQ_ES_TCP_PF0_REG_PRANGE0 (0xff << 16)
-#define LTQ_ES_TCP_PF0_REG_PRANGE0_VAL(val) (((val) & 0xff) << 16)
-#define LTQ_ES_TCP_PF0_REG_PRANGE0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_PRANGE0) >> 16) & 0xff)
-#define LTQ_ES_TCP_PF0_REG_PRANGE0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_PRANGE0) | (((val) & 0xff) << 16))
-/* Base Port number 0 (15:0) */
-#define LTQ_ES_TCP_PF0_REG_BASEPT0 (0xffff)
-#define LTQ_ES_TCP_PF0_REG_BASEPT0_VAL(val) (((val) & 0xffff) << 0)
-#define LTQ_ES_TCP_PF0_REG_BASEPT0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_BASEPT0) >> 0) & 0xffff)
-#define LTQ_ES_TCP_PF0_REG_BASEPT0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_BASEPT0) | (((val) & 0xffff) << 0))
-
-/*******************************************************************************
- * Reserved DA(0180C2000003~0180C2000000) control register
- ******************************************************************************/
-
-/* Valid bit for 0180C2000003 (31) */
-#define LTQ_ES_RA_03_00_REG_RA03_VALID (0x1 << 31)
-#define LTQ_ES_RA_03_00_REG_RA03_VALID_VAL(val) (((val) & 0x1) << 31)
-#define LTQ_ES_RA_03_00_REG_RA03_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_VALID) >> 31) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA03_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_VALID) | (((val) & 0x1) << 31))
-/* Span bit for 0180C2000003 (30) */
-#define LTQ_ES_RA_03_00_REG_RA03_SPAN (0x1 << 30)
-#define LTQ_ES_RA_03_00_REG_RA03_SPAN_VAL(val) (((val) & 0x1) << 30)
-#define LTQ_ES_RA_03_00_REG_RA03_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_SPAN) >> 30) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA03_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_SPAN) | (((val) & 0x1) << 30))
-/* Management bit for 0180C2000003 (29) */
-#define LTQ_ES_RA_03_00_REG_RA03_MG (0x1 << 29)
-#define LTQ_ES_RA_03_00_REG_RA03_MG_VAL(val) (((val) & 0x1) << 29)
-#define LTQ_ES_RA_03_00_REG_RA03_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_MG) >> 29) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA03_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_MG) | (((val) & 0x1) << 29))
-/* Cross_VLAN bit for 0180C2000003 (28) */
-#define LTQ_ES_RA_03_00_REG_RA03_CV (0x1 << 28)
-#define LTQ_ES_RA_03_00_REG_RA03_CV_VAL(val) (((val) & 0x1) << 28)
-#define LTQ_ES_RA_03_00_REG_RA03_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_CV) >> 28) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA03_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_CV) | (((val) & 0x1) << 28))
-/* TXTAG bit for 0180C2000003 (27:26) */
-#define LTQ_ES_RA_03_00_REG_RA03_TXTAG (0x3 << 26)
-#define LTQ_ES_RA_03_00_REG_RA03_TXTAG_VAL(val) (((val) & 0x3) << 26)
-#define LTQ_ES_RA_03_00_REG_RA03_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_TXTAG) >> 26) & 0x3)
-#define LTQ_ES_RA_03_00_REG_RA03_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_TXTAG) | (((val) & 0x3) << 26))
-/* Action bit for 0180C2000003 (25:24) */
-#define LTQ_ES_RA_03_00_REG_RA03_ACT (0x3 << 24)
-#define LTQ_ES_RA_03_00_REG_RA03_ACT_VAL(val) (((val) & 0x3) << 24)
-#define LTQ_ES_RA_03_00_REG_RA03_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_ACT) >> 24) & 0x3)
-#define LTQ_ES_RA_03_00_REG_RA03_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_ACT) | (((val) & 0x3) << 24))
-/* Valid bit for 0180C2000002 (23) */
-#define LTQ_ES_RA_03_00_REG_RA02_VALID (0x1 << 23)
-#define LTQ_ES_RA_03_00_REG_RA02_VALID_VAL(val) (((val) & 0x1) << 23)
-#define LTQ_ES_RA_03_00_REG_RA02_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_VALID) >> 23) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA02_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_VALID) | (((val) & 0x1) << 23))
-/* Span bit for 0180C2000002 (22) */
-#define LTQ_ES_RA_03_00_REG_RA02_SPAN (0x1 << 22)
-#define LTQ_ES_RA_03_00_REG_RA02_SPAN_VAL(val) (((val) & 0x1) << 22)
-#define LTQ_ES_RA_03_00_REG_RA02_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_SPAN) >> 22) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA02_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_SPAN) | (((val) & 0x1) << 22))
-/* Management bit for 0180C2000002 (21) */
-#define LTQ_ES_RA_03_00_REG_RA02_MG (0x1 << 21)
-#define LTQ_ES_RA_03_00_REG_RA02_MG_VAL(val) (((val) & 0x1) << 21)
-#define LTQ_ES_RA_03_00_REG_RA02_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_MG) >> 21) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA02_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_MG) | (((val) & 0x1) << 21))
-/* Cross_VLAN bit for 0180C2000002 (20) */
-#define LTQ_ES_RA_03_00_REG_RA02_CV (0x1 << 20)
-#define LTQ_ES_RA_03_00_REG_RA02_CV_VAL(val) (((val) & 0x1) << 20)
-#define LTQ_ES_RA_03_00_REG_RA02_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_CV) >> 20) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA02_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_CV) | (((val) & 0x1) << 20))
-/* TXTAG bit for 0180C2000002 (19:18) */
-#define LTQ_ES_RA_03_00_REG_RA02_TXTAG (0x3 << 18)
-#define LTQ_ES_RA_03_00_REG_RA02_TXTAG_VAL(val) (((val) & 0x3) << 18)
-#define LTQ_ES_RA_03_00_REG_RA02_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_TXTAG) >> 18) & 0x3)
-#define LTQ_ES_RA_03_00_REG_RA02_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_TXTAG) | (((val) & 0x3) << 18))
-/* Action bit for 0180C2000002 (17:16) */
-#define LTQ_ES_RA_03_00_REG_RA02_ACT (0x3 << 16)
-#define LTQ_ES_RA_03_00_REG_RA02_ACT_VAL(val) (((val) & 0x3) << 16)
-#define LTQ_ES_RA_03_00_REG_RA02_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_ACT) >> 16) & 0x3)
-#define LTQ_ES_RA_03_00_REG_RA02_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_ACT) | (((val) & 0x3) << 16))
-/* Valid bit for 0180C2000001 (15) */
-#define LTQ_ES_RA_03_00_REG_RA01_VALID (0x1 << 15)
-#define LTQ_ES_RA_03_00_REG_RA01_VALID_VAL(val) (((val) & 0x1) << 15)
-#define LTQ_ES_RA_03_00_REG_RA01_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_VALID) >> 15) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA01_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_VALID) | (((val) & 0x1) << 15))
-/* Span bit for 0180C2000001 (14) */
-#define LTQ_ES_RA_03_00_REG_RA01_SPAN (0x1 << 14)
-#define LTQ_ES_RA_03_00_REG_RA01_SPAN_VAL(val) (((val) & 0x1) << 14)
-#define LTQ_ES_RA_03_00_REG_RA01_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_SPAN) >> 14) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA01_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_SPAN) | (((val) & 0x1) << 14))
-/* Management bit for 0180C2000001 (13) */
-#define LTQ_ES_RA_03_00_REG_RA01_MG (0x1 << 13)
-#define LTQ_ES_RA_03_00_REG_RA01_MG_VAL(val) (((val) & 0x1) << 13)
-#define LTQ_ES_RA_03_00_REG_RA01_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_MG) >> 13) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA01_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_MG) | (((val) & 0x1) << 13))
-/* Cross_VLAN bit for 0180C2000001 (12) */
-#define LTQ_ES_RA_03_00_REG_RA01_CV (0x1 << 12)
-#define LTQ_ES_RA_03_00_REG_RA01_CV_VAL(val) (((val) & 0x1) << 12)
-#define LTQ_ES_RA_03_00_REG_RA01_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_CV) >> 12) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA01_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_CV) | (((val) & 0x1) << 12))
-/* TXTAG bit for 0180C2000001 (11:10) */
-#define LTQ_ES_RA_03_00_REG_RA01_TXTAG (0x3 << 10)
-#define LTQ_ES_RA_03_00_REG_RA01_TXTAG_VAL(val) (((val) & 0x3) << 10)
-#define LTQ_ES_RA_03_00_REG_RA01_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_TXTAG) >> 10) & 0x3)
-#define LTQ_ES_RA_03_00_REG_RA01_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_TXTAG) | (((val) & 0x3) << 10))
-/* Action bit for 0180C2000001 (9:8) */
-#define LTQ_ES_RA_03_00_REG_RA01_ACT (0x3 << 8)
-#define LTQ_ES_RA_03_00_REG_RA01_ACT_VAL(val) (((val) & 0x3) << 8)
-#define LTQ_ES_RA_03_00_REG_RA01_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_ACT) >> 8) & 0x3)
-#define LTQ_ES_RA_03_00_REG_RA01_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_ACT) | (((val) & 0x3) << 8))
-/* Valid bit for 0180C2000000 (7) */
-#define LTQ_ES_RA_03_00_REG_RA00_VALID (0x1 << 7)
-#define LTQ_ES_RA_03_00_REG_RA00_VALID_VAL(val) (((val) & 0x1) << 7)
-#define LTQ_ES_RA_03_00_REG_RA00_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_VALID) >> 7) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA00_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_VALID) | (((val) & 0x1) << 7))
-/* Span bit for 0180C2000000 (6) */
-#define LTQ_ES_RA_03_00_REG_RA00_SPAN (0x1 << 6)
-#define LTQ_ES_RA_03_00_REG_RA00_SPAN_VAL(val) (((val) & 0x1) << 6)
-#define LTQ_ES_RA_03_00_REG_RA00_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_SPAN) >> 6) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA00_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_SPAN) | (((val) & 0x1) << 6))
-/* Management bit for 0180C2000000 (5) */
-#define LTQ_ES_RA_03_00_REG_RA00_MG (0x1 << 5)
-#define LTQ_ES_RA_03_00_REG_RA00_MG_VAL(val) (((val) & 0x1) << 5)
-#define LTQ_ES_RA_03_00_REG_RA00_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_MG) >> 5) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA00_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_MG) | (((val) & 0x1) << 5))
-/* Cross_VLAN bit for 0180C2000000 (4) */
-#define LTQ_ES_RA_03_00_REG_RA00_CV (0x1 << 4)
-#define LTQ_ES_RA_03_00_REG_RA00_CV_VAL(val) (((val) & 0x1) << 4)
-#define LTQ_ES_RA_03_00_REG_RA00_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_CV) >> 4) & 0x1)
-#define LTQ_ES_RA_03_00_REG_RA00_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_CV) | (((val) & 0x1) << 4))
-/* TXTAG bit for 0180C2000000 (3:2) */
-#define LTQ_ES_RA_03_00_REG_RA00_TXTAG (0x3 << 2)
-#define LTQ_ES_RA_03_00_REG_RA00_TXTAG_VAL(val) (((val) & 0x3) << 2)
-#define LTQ_ES_RA_03_00_REG_RA00_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_TXTAG) >> 2) & 0x3)
-#define LTQ_ES_RA_03_00_REG_RA00_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_TXTAG) | (((val) & 0x3) << 2))
-/* Action bit for 0180C2000000 (1:0) */
-#define LTQ_ES_RA_03_00_REG_RA00_ACT (0x3)
-#define LTQ_ES_RA_03_00_REG_RA00_ACT_VAL(val) (((val) & 0x3) << 0)
-#define LTQ_ES_RA_03_00_REG_RA00_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_ACT) >> 0) & 0x3)
-#define LTQ_ES_RA_03_00_REG_RA00_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_ACT) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * Protocol Filter 0
- ******************************************************************************/
-
-/* Value Compared with Protocol in IP Header (31:24) */
-#define LTQ_ES_PRTCL_F0_REG_PFR3 (0xff << 24)
-#define LTQ_ES_PRTCL_F0_REG_PFR3_VAL(val) (((val) & 0xff) << 24)
-#define LTQ_ES_PRTCL_F0_REG_PFR3_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR3) >> 24) & 0xff)
-#define LTQ_ES_PRTCL_F0_REG_PFR3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR3) | (((val) & 0xff) << 24))
-/* Value Compared with Protocol in IP Header (23:16) */
-#define LTQ_ES_PRTCL_F0_REG_PFR2 (0xff << 16)
-#define LTQ_ES_PRTCL_F0_REG_PFR2_VAL(val) (((val) & 0xff) << 16)
-#define LTQ_ES_PRTCL_F0_REG_PFR2_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR2) >> 16) & 0xff)
-#define LTQ_ES_PRTCL_F0_REG_PFR2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR2) | (((val) & 0xff) << 16))
-/* Value Compared with Protocol in IP Header (15:8) */
-#define LTQ_ES_PRTCL_F0_REG_PFR1 (0xff << 8)
-#define LTQ_ES_PRTCL_F0_REG_PFR1_VAL(val) (((val) & 0xff) << 8)
-#define LTQ_ES_PRTCL_F0_REG_PFR1_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR1) >> 8) & 0xff)
-#define LTQ_ES_PRTCL_F0_REG_PFR1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR1) | (((val) & 0xff) << 8))
-/* Value Compared with Protocol in IP Header (7:0) */
-#define LTQ_ES_PRTCL_F0_REG_PFR0 (0xff)
-#define LTQ_ES_PRTCL_F0_REG_PFR0_VAL(val) (((val) & 0xff) << 0)
-#define LTQ_ES_PRTCL_F0_REG_PFR0_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR0) >> 0) & 0xff)
-#define LTQ_ES_PRTCL_F0_REG_PFR0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR0) | (((val) & 0xff) << 0))
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/irq.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/irq.h
deleted file mode 100644
index 06dc173544..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/irq.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/mips/include/asm/mach-lantiq/svip/irq.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2010 Lantiq
- *
- */
-
-#ifndef __IRQ_H
-#define __IRQ_H
-
-#include <svip_irq.h>
-
-#define NR_IRQS 264
-
-#include_next <irq.h>
-
-/* Functions for EXINT handling */
-extern int ifx_enable_external_int(u32 exint, u32 mode);
-extern int ifx_disable_external_int(u32 exint);
-extern int ifx_external_int_level(u32 exint);
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/lantiq_soc.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/lantiq_soc.h
deleted file mode 100644
index 697d672f36..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/lantiq_soc.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#ifndef _LTQ_SVIP_H__
-#define _LTQ_SVIP_H__
-
-#ifdef CONFIG_SOC_SVIP
-
-#include <lantiq.h>
-
-/* Chip IDs */
-#define SOC_ID_SVIP 0x169
-
-/* SoC Types */
-#define SOC_TYPE_SVIP 0x01
-
-/* ASC0/1 - serial port */
-#define LTQ_ASC0_BASE_ADDR 0x14100100
-#define LTQ_ASC1_BASE_ADDR 0x14100200
-#define LTQ_ASC_SIZE 0x100
-#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC0_BASE_ADDR)
-
-#define LTQ_ASC_TIR(x) (INT_NUM_IM0_IRL0 + (x * 8))
-#define LTQ_ASC_RIR(x) (INT_NUM_IM0_IRL0 + (x * 8) + 2)
-#define LTQ_ASC_EIR(x) (INT_NUM_IM0_IRL0 + (x * 8) + 3)
-
-/* ICU - interrupt control unit */
-#define LTQ_ICU_BASE_ADDR 0x14106000
-#define LTQ_ICU_BASE_ADDR1 0x14106028
-#define LTQ_ICU_BASE_ADDR2 0x1E016000
-#define LTQ_ICU_BASE_ADDR3 0x1E016028
-#define LTQ_ICU_BASE_ADDR4 0x14106050
-#define LTQ_ICU_BASE_ADDR5 0x14106078
-#define LTQ_ICU_SIZE 0x100
-
-/* WDT */
-#define LTQ_WDT_BASE_ADDR 0x1F8803F0
-#define LTQ_WDT_SIZE 0x10
-
-/* Status */
-#define LTQ_STATUS_BASE_ADDR (KSEG1 + 0x1E000500)
-#define LTQ_STATUS_CHIPID ((u32 *)(LTQ_STATUS_BASE_ADDR + 0x000C))
-
-#define LTQ_EIU_BASE_ADDR 0
-
-#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y))
-#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x))
-
-extern __iomem void *ltq_ebu_membase;
-
-extern void ltq_gpio_configure(int port, int pin, bool dirin, bool puen,
- bool altsel0, bool altsel1);
-extern int ltq_port_get_dir(unsigned int port, unsigned int pin);
-extern int ltq_port_get_puden(unsigned int port, unsigned int pin);
-extern int ltq_port_get_altsel0(unsigned int port, unsigned int pin);
-extern int ltq_port_get_altsel1(unsigned int port, unsigned int pin);
-
-#define ltq_is_ar9() 0
-#define ltq_is_vr9() 0
-#define ltq_is_falcon() 0
-
-#define BS_FLASH 0
-#define LTQ_RST_CAUSE_WDTRST 0x2
-
-#endif /* CONFIG_SOC_SVIP */
-#endif /* _LTQ_SVIP_H__ */
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/mps_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/mps_reg.h
deleted file mode 100644
index 79966b7be7..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/mps_reg.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __MPS_REG_H
-#define __MPS_REG_H
-
-#define mbs_r32(reg) ltq_r32(&mbs->reg)
-#define mbs_w32(val, reg) ltq_w32(val, &mbs->reg)
-#define mbs_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &mbs->reg)
-
-/** MBS register structure */
-struct svip_reg_mbs {
- unsigned long reserved0[4];
- unsigned long mbsr0; /* 0x0010 */
- unsigned long mbsr1; /* 0x0014 */
- unsigned long mbsr2; /* 0x0018 */
- unsigned long mbsr3; /* 0x001c */
- unsigned long mbsr4; /* 0x0020 */
- unsigned long mbsr5; /* 0x0024 */
- unsigned long mbsr6; /* 0x0028 */
- unsigned long mbsr7; /* 0x002c */
- unsigned long mbsr8; /* 0x0030 */
- unsigned long mbsr9; /* 0x0034 */
- unsigned long mbsr10; /* 0x0038 */
- unsigned long mbsr11; /* 0x003c */
- unsigned long mbsr12; /* 0x0040 */
- unsigned long mbsr13; /* 0x0044 */
- unsigned long mbsr14; /* 0x0048 */
- unsigned long mbsr15; /* 0x004c */
- unsigned long mbsr16; /* 0x0050 */
- unsigned long mbsr17; /* 0x0054 */
- unsigned long mbsr18; /* 0x0058 */
- unsigned long mbsr19; /* 0x005c */
- unsigned long mbsr20; /* 0x0060 */
- unsigned long mbsr21; /* 0x0064 */
- unsigned long mbsr22; /* 0x0068 */
- unsigned long mbsr23; /* 0x006c */
- unsigned long mbsr24; /* 0x0070 */
- unsigned long mbsr25; /* 0x0074 */
- unsigned long mbsr26; /* 0x0078 */
- unsigned long mbsr27; /* 0x007c */
- unsigned long mbsr28; /* 0x0080 */
-};
-
-/** MPS register structure */
-struct svip_reg_mps {
- volatile unsigned long mps_swirn0set; /* 0x0000 */
- volatile unsigned long mps_swirn0en; /* 0x0004 */
- volatile unsigned long mps_swirn0cr; /* 0x0008 */
- volatile unsigned long mps_swirn0icr; /* 0x000C */
- volatile unsigned long mps_swirn1set; /* 0x0010 */
- volatile unsigned long mps_swirn1en; /* 0x0014 */
- volatile unsigned long mps_swirn1cr; /* 0x0018 */
- volatile unsigned long mps_swirn1icr; /* 0x001C */
- volatile unsigned long mps_swirn2set; /* 0x0020 */
- volatile unsigned long mps_swirn2en; /* 0x0024 */
- volatile unsigned long mps_swirn2cr; /* 0x0028 */
- volatile unsigned long mps_swirn2icr; /* 0x002C */
- volatile unsigned long mps_swirn3set; /* 0x0030 */
- volatile unsigned long mps_swirn3en; /* 0x0034 */
- volatile unsigned long mps_swirn3cr; /* 0x0038 */
- volatile unsigned long mps_swirn3icr; /* 0x003C */
- volatile unsigned long mps_swirn4set; /* 0x0040 */
- volatile unsigned long mps_swirn4en; /* 0x0044 */
- volatile unsigned long mps_swirn4cr; /* 0x0048 */
- volatile unsigned long mps_swirn4icr; /* 0x004C */
- volatile unsigned long mps_swirn5set; /* 0x0050 */
- volatile unsigned long mps_swirn5en; /* 0x0054 */
- volatile unsigned long mps_swirn5cr; /* 0x0058 */
- volatile unsigned long mps_swirn5icr; /* 0x005C */
- volatile unsigned long mps_swirn6set; /* 0x0060 */
- volatile unsigned long mps_swirn6en; /* 0x0064 */
- volatile unsigned long mps_swirn6cr; /* 0x0068 */
- volatile unsigned long mps_swirn6icr; /* 0x006C */
- volatile unsigned long mps_swirn7set; /* 0x0070 */
- volatile unsigned long mps_swirn7en; /* 0x0074 */
- volatile unsigned long mps_swirn7cr; /* 0x0078 */
- volatile unsigned long mps_swirn7icr; /* 0x007C */
- volatile unsigned long mps_swirn8set; /* 0x0080 */
- volatile unsigned long mps_swirn8en; /* 0x0084 */
- volatile unsigned long mps_swirn8cr; /* 0x0088 */
- volatile unsigned long mps_swirn8icr; /* 0x008C */
-};
-
-/* Software Interrupt */
-#define IFX_MPS_SWIRN0SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0000))
-#define IFX_MPS_SWIRN0EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0004))
-#define IFX_MPS_SWIRN0CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0008))
-#define IFX_MPS_SWIRN0ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x000C))
-#define IFX_MPS_SWIRN1SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0010))
-#define IFX_MPS_SWIRN1EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0014))
-#define IFX_MPS_SWIRN1CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0018))
-#define IFX_MPS_SWIRN1ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x001C))
-#define IFX_MPS_SWIRN2SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0020))
-#define IFX_MPS_SWIRN2EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0024))
-#define IFX_MPS_SWIRN2CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0028))
-#define IFX_MPS_SWIRN2ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x002C))
-#define IFX_MPS_SWIRN3SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0030))
-#define IFX_MPS_SWIRN3EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0034))
-#define IFX_MPS_SWIRN3CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0038))
-#define IFX_MPS_SWIRN3ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x003C))
-#define IFX_MPS_SWIRN4SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0040))
-#define IFX_MPS_SWIRN4EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0044))
-#define IFX_MPS_SWIRN4CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0048))
-#define IFX_MPS_SWIRN4ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x004C))
-#define IFX_MPS_SWIRN5SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0050))
-#define IFX_MPS_SWIRN5EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0054))
-#define IFX_MPS_SWIRN5CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0058))
-#define IFX_MPS_SWIRN5ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x005C))
-#define IFX_MPS_SWIRN6SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0060))
-#define IFX_MPS_SWIRN6EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0064))
-#define IFX_MPS_SWIRN6CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0068))
-#define IFX_MPS_SWIRN6ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x006C))
-#define IFX_MPS_SWIRN7SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0070))
-#define IFX_MPS_SWIRN7EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0074))
-#define IFX_MPS_SWIRN7CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0078))
-#define IFX_MPS_SWIRN7ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x007C))
-#define IFX_MPS_SWIRN8SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0080))
-#define IFX_MPS_SWIRN8EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0084))
-#define IFX_MPS_SWIRN8ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x008C))
-#define IFX_MPS_SWIRN8CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0088))
-
-/*******************************************************************************
- * MPS_SWIRNSET Register
- ******************************************************************************/
-
-/* Software Interrupt Request IR5 (5) */
-#define IFX_MPS_SWIRNSET_IR5 (0x1 << 5)
-#define IFX_MPS_SWIRNSET_IR5_VAL(val) (((val) & 0x1) << 5)
-#define IFX_MPS_SWIRNSET_IR5_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR5) | (val) & 1) << 5)
-/* Software Interrupt Request IR4 (4) */
-#define IFX_MPS_SWIRNSET_IR4 (0x1 << 4)
-#define IFX_MPS_SWIRNSET_IR4_VAL(val) (((val) & 0x1) << 4)
-#define IFX_MPS_SWIRNSET_IR4_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR4) | (val) & 1) << 4)
-/* Software Interrupt Request IR3 (3) */
-#define IFX_MPS_SWIRNSET_IR3 (0x1 << 3)
-#define IFX_MPS_SWIRNSET_IR3_VAL(val) (((val) & 0x1) << 3)
-#define IFX_MPS_SWIRNSET_IR3_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR3) | (val) & 1) << 3)
-/* Software Interrupt Request IR2 (2) */
-#define IFX_MPS_SWIRNSET_IR2 (0x1 << 2)
-#define IFX_MPS_SWIRNSET_IR2_VAL(val) (((val) & 0x1) << 2)
-#define IFX_MPS_SWIRNSET_IR2_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR2) | (val) & 1) << 2)
-/* Software Interrupt Request IR1 (1) */
-#define IFX_MPS_SWIRNSET_IR1 (0x1 << 1)
-#define IFX_MPS_SWIRNSET_IR1_VAL(val) (((val) & 0x1) << 1)
-#define IFX_MPS_SWIRNSET_IR1_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR1) | (val) & 1) << 1)
-/* Software Interrupt Request IR0 (0) */
-#define IFX_MPS_SWIRNSET_IR0 (0x1)
-#define IFX_MPS_SWIRNSET_IR0_VAL(val) (((val) & 0x1) << 0)
-#define IFX_MPS_SWIRNSET_IR0_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR0) | (val) & 1) << 0)
-
-/*******************************************************************************
- * MPS_SWIRNEN Register
- ******************************************************************************/
-
-/* Software Interrupt Request IR5 (5) */
-#define IFX_MPS_SWIRNEN_IR5 (0x1 << 5)
-#define IFX_MPS_SWIRNEN_IR5_VAL(val) (((val) & 0x1) << 5)
-#define IFX_MPS_SWIRNEN_IR5_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR5) >> 5) & 0x1)
-#define IFX_MPS_SWIRNEN_IR5_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR5) | (((val) & 0x1) << 5))
-/* Software Interrupt Request IR4 (4) */
-#define IFX_MPS_SWIRNEN_IR4 (0x1 << 4)
-#define IFX_MPS_SWIRNEN_IR4_VAL(val) (((val) & 0x1) << 4)
-#define IFX_MPS_SWIRNEN_IR4_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR4) >> 4) & 0x1)
-#define IFX_MPS_SWIRNEN_IR4_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR4) | (((val) & 0x1) << 4))
-/* Software Interrupt Request IR3 (3) */
-#define IFX_MPS_SWIRNEN_IR3 (0x1 << 3)
-#define IFX_MPS_SWIRNEN_IR3_VAL(val) (((val) & 0x1) << 3)
-#define IFX_MPS_SWIRNEN_IR3_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR3) >> 3) & 0x1)
-#define IFX_MPS_SWIRNEN_IR3_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR3) | (((val) & 0x1) << 3))
-/* Software Interrupt Request IR2 (2) */
-#define IFX_MPS_SWIRNEN_IR2 (0x1 << 2)
-#define IFX_MPS_SWIRNEN_IR2_VAL(val) (((val) & 0x1) << 2)
-#define IFX_MPS_SWIRNEN_IR2_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR2) >> 2) & 0x1)
-#define IFX_MPS_SWIRNEN_IR2_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR2) | (((val) & 0x1) << 2))
-/* Software Interrupt Request IR1 (1) */
-#define IFX_MPS_SWIRNEN_IR1 (0x1 << 1)
-#define IFX_MPS_SWIRNEN_IR1_VAL(val) (((val) & 0x1) << 1)
-#define IFX_MPS_SWIRNEN_IR1_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR1) >> 1) & 0x1)
-#define IFX_MPS_SWIRNEN_IR1_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR1) | (((val) & 0x1) << 1))
-/* Software Interrupt Request IR0 (0) */
-#define IFX_MPS_SWIRNEN_IR0 (0x1)
-#define IFX_MPS_SWIRNEN_IR0_VAL(val) (((val) & 0x1) << 0)
-#define IFX_MPS_SWIRNEN_IR0_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR0) >> 0) & 0x1)
-#define IFX_MPS_SWIRNEN_IR0_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * MPS_SWIRNICR Register
- ******************************************************************************/
-
-/* Software Interrupt Request IR5 (5) */
-#define IFX_MPS_SWIRNICR_IR5 (0x1 << 5)
-#define IFX_MPS_SWIRNICR_IR5_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR5) >> 5) & 0x1)
-/* Software Interrupt Request IR4 (4) */
-#define IFX_MPS_SWIRNICR_IR4 (0x1 << 4)
-#define IFX_MPS_SWIRNICR_IR4_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR4) >> 4) & 0x1)
-/* Software Interrupt Request IR3 (3) */
-#define IFX_MPS_SWIRNICR_IR3 (0x1 << 3)
-#define IFX_MPS_SWIRNICR_IR3_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR3) >> 3) & 0x1)
-/* Software Interrupt Request IR2 (2) */
-#define IFX_MPS_SWIRNICR_IR2 (0x1 << 2)
-#define IFX_MPS_SWIRNICR_IR2_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR2) >> 2) & 0x1)
-/* Software Interrupt Request IR1 (1) */
-#define IFX_MPS_SWIRNICR_IR1 (0x1 << 1)
-#define IFX_MPS_SWIRNICR_IR1_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR1) >> 1) & 0x1)
-/* Software Interrupt Request IR0 (0) */
-#define IFX_MPS_SWIRNICR_IR0 (0x1)
-#define IFX_MPS_SWIRNICR_IR0_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR0) >> 0) & 0x1)
-
-/*******************************************************************************
- * MPS_SWIRNCR Register
- ******************************************************************************/
-
-/* Software Interrupt Request IR5 (5) */
-#define IFX_MPS_SWIRNCR_IR5 (0x1 << 5)
-#define IFX_MPS_SWIRNCR_IR5_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR5) >> 5) & 0x1)
-/* Software Interrupt Request IR4 (4) */
-#define IFX_MPS_SWIRNCR_IR4 (0x1 << 4)
-#define IFX_MPS_SWIRNCR_IR4_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR4) >> 4) & 0x1)
-/* Software Interrupt Request IR3 (3) */
-#define IFX_MPS_SWIRNCR_IR3 (0x1 << 3)
-#define IFX_MPS_SWIRNCR_IR3_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR3) >> 3) & 0x1)
-/* Software Interrupt Request IR2 (2) */
-#define IFX_MPS_SWIRNCR_IR2 (0x1 << 2)
-#define IFX_MPS_SWIRNCR_IR2_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR2) >> 2) & 0x1)
-/* Software Interrupt Request IR1 (1) */
-#define IFX_MPS_SWIRNCR_IR1 (0x1 << 1)
-#define IFX_MPS_SWIRNCR_IR1_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR1) >> 1) & 0x1)
-/* Software Interrupt Request IR0 (0) */
-#define IFX_MPS_SWIRNCR_IR0 (0x1)
-#define IFX_MPS_SWIRNCR_IR0_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR0) >> 0) & 0x1)
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/port_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/port_reg.h
deleted file mode 100644
index 57d04917fc..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/port_reg.h
+++ /dev/null
@@ -1,3262 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __PORT_REG_H
-#define __PORT_REG_H
-
-#define port_r32(reg) __raw_readl(&reg)
-#define port_w32(val, reg) __raw_writel(val, &reg)
-
-/** PORT register structure */
-struct svip_reg_port {
- volatile u32 out; /* 0x0000 */
- volatile u32 in; /* 0x0004 */
- volatile u32 dir; /* 0x0008 */
- volatile u32 altsel0; /* 0x000C */
- volatile u32 altsel1; /* 0x0010 */
- volatile u32 puen; /* 0x0014 */
- volatile u32 exintcr0; /* 0x0018 */
- volatile u32 exintcr1; /* 0x001C */
- volatile u32 irncr; /* 0x0020 */
- volatile u32 irnicr; /* 0x0024 */
- volatile u32 irnen; /* 0x0028 */
- volatile u32 irncfg; /* 0x002C */
- volatile u32 irnenset; /* 0x0030 */
- volatile u32 irnenclr; /* 0x0034 */
-};
-
-/*******************************************************************************
- * Port 0 Data Output Register
- ******************************************************************************/
-
-/* Port 0 Pin # Output Value (19) */
-#define PORT_P0_OUT_P19 (0x1 << 19)
-#define PORT_P0_OUT_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P0_OUT_P19_GET(val) ((((val) & PORT_P0_OUT_P19) >> 19) & 0x1)
-#define PORT_P0_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P19) | (((val) & 0x1) << 19))
-/* Port 0 Pin # Output Value (18) */
-#define PORT_P0_OUT_P18 (0x1 << 18)
-#define PORT_P0_OUT_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P0_OUT_P18_GET(val) ((((val) & PORT_P0_OUT_P18) >> 18) & 0x1)
-#define PORT_P0_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P18) | (((val) & 0x1) << 18))
-/* Port 0 Pin # Output Value (17) */
-#define PORT_P0_OUT_P17 (0x1 << 17)
-#define PORT_P0_OUT_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P0_OUT_P17_GET(val) ((((val) & PORT_P0_OUT_P17) >> 17) & 0x1)
-#define PORT_P0_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P17) | (((val) & 0x1) << 17))
-/* Port 0 Pin # Output Value (16) */
-#define PORT_P0_OUT_P16 (0x1 << 16)
-#define PORT_P0_OUT_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P0_OUT_P16_GET(val) ((((val) & PORT_P0_OUT_P16) >> 16) & 0x1)
-#define PORT_P0_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P16) | (((val) & 0x1) << 16))
-/* Port 0 Pin # Output Value (15) */
-#define PORT_P0_OUT_P15 (0x1 << 15)
-#define PORT_P0_OUT_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P0_OUT_P15_GET(val) ((((val) & PORT_P0_OUT_P15) >> 15) & 0x1)
-#define PORT_P0_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P15) | (((val) & 0x1) << 15))
-/* Port 0 Pin # Output Value (14) */
-#define PORT_P0_OUT_P14 (0x1 << 14)
-#define PORT_P0_OUT_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P0_OUT_P14_GET(val) ((((val) & PORT_P0_OUT_P14) >> 14) & 0x1)
-#define PORT_P0_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P14) | (((val) & 0x1) << 14))
-/* Port 0 Pin # Output Value (13) */
-#define PORT_P0_OUT_P13 (0x1 << 13)
-#define PORT_P0_OUT_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_OUT_P13_GET(val) ((((val) & PORT_P0_OUT_P13) >> 13) & 0x1)
-#define PORT_P0_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P13) | (((val) & 0x1) << 13))
-/* Port 0 Pin # Output Value (12) */
-#define PORT_P0_OUT_P12 (0x1 << 12)
-#define PORT_P0_OUT_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_OUT_P12_GET(val) ((((val) & PORT_P0_OUT_P12) >> 12) & 0x1)
-#define PORT_P0_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P12) | (((val) & 0x1) << 12))
-/* Port 0 Pin # Output Value (11) */
-#define PORT_P0_OUT_P11 (0x1 << 11)
-#define PORT_P0_OUT_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_OUT_P11_GET(val) ((((val) & PORT_P0_OUT_P11) >> 11) & 0x1)
-#define PORT_P0_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P11) | (((val) & 0x1) << 11))
-/* Port 0 Pin # Output Value (10) */
-#define PORT_P0_OUT_P10 (0x1 << 10)
-#define PORT_P0_OUT_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_OUT_P10_GET(val) ((((val) & PORT_P0_OUT_P10) >> 10) & 0x1)
-#define PORT_P0_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P10) | (((val) & 0x1) << 10))
-/* Port 0 Pin # Output Value (9) */
-#define PORT_P0_OUT_P9 (0x1 << 9)
-#define PORT_P0_OUT_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_OUT_P9_GET(val) ((((val) & PORT_P0_OUT_P9) >> 9) & 0x1)
-#define PORT_P0_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P9) | (((val) & 0x1) << 9))
-/* Port 0 Pin # Output Value (8) */
-#define PORT_P0_OUT_P8 (0x1 << 8)
-#define PORT_P0_OUT_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_OUT_P8_GET(val) ((((val) & PORT_P0_OUT_P8) >> 8) & 0x1)
-#define PORT_P0_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P8) | (((val) & 0x1) << 8))
-/* Port 0 Pin # Output Value (7) */
-#define PORT_P0_OUT_P7 (0x1 << 7)
-#define PORT_P0_OUT_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_OUT_P7_GET(val) ((((val) & PORT_P0_OUT_P7) >> 7) & 0x1)
-#define PORT_P0_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P7) | (((val) & 0x1) << 7))
-/* Port 0 Pin # Output Value (6) */
-#define PORT_P0_OUT_P6 (0x1 << 6)
-#define PORT_P0_OUT_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P0_OUT_P6_GET(val) ((((val) & PORT_P0_OUT_P6) >> 6) & 0x1)
-#define PORT_P0_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P6) | (((val) & 0x1) << 6))
-/* Port 0 Pin # Output Value (5) */
-#define PORT_P0_OUT_P5 (0x1 << 5)
-#define PORT_P0_OUT_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P0_OUT_P5_GET(val) ((((val) & PORT_P0_OUT_P5) >> 5) & 0x1)
-#define PORT_P0_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P5) | (((val) & 0x1) << 5))
-/* Port 0 Pin # Output Value (4) */
-#define PORT_P0_OUT_P4 (0x1 << 4)
-#define PORT_P0_OUT_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P0_OUT_P4_GET(val) ((((val) & PORT_P0_OUT_P4) >> 4) & 0x1)
-#define PORT_P0_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P4) | (((val) & 0x1) << 4))
-/* Port 0 Pin # Output Value (3) */
-#define PORT_P0_OUT_P3 (0x1 << 3)
-#define PORT_P0_OUT_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P0_OUT_P3_GET(val) ((((val) & PORT_P0_OUT_P3) >> 3) & 0x1)
-#define PORT_P0_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P3) | (((val) & 0x1) << 3))
-/* Port 0 Pin # Output Value (2) */
-#define PORT_P0_OUT_P2 (0x1 << 2)
-#define PORT_P0_OUT_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P0_OUT_P2_GET(val) ((((val) & PORT_P0_OUT_P2) >> 2) & 0x1)
-#define PORT_P0_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P2) | (((val) & 0x1) << 2))
-/* Port 0 Pin # Output Value (1) */
-#define PORT_P0_OUT_P1 (0x1 << 1)
-#define PORT_P0_OUT_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P0_OUT_P1_GET(val) ((((val) & PORT_P0_OUT_P1) >> 1) & 0x1)
-#define PORT_P0_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P1) | (((val) & 0x1) << 1))
-/* Port 0 Pin # Output Value (0) */
-#define PORT_P0_OUT_P0 (0x1)
-#define PORT_P0_OUT_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P0_OUT_P0_GET(val) ((((val) & PORT_P0_OUT_P0) >> 0) & 0x1)
-#define PORT_P0_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 0 Data Input Register
- ******************************************************************************/
-
-/* Port 0 Pin # Latched Input Value (19) */
-#define PORT_P0_IN_P19 (0x1 << 19)
-#define PORT_P0_IN_P19_GET(val) ((((val) & PORT_P0_IN_P19) >> 19) & 0x1)
-/* Port 0 Pin # Latched Input Value (18) */
-#define PORT_P0_IN_P18 (0x1 << 18)
-#define PORT_P0_IN_P18_GET(val) ((((val) & PORT_P0_IN_P18) >> 18) & 0x1)
-/* Port 0 Pin # Latched Input Value (17) */
-#define PORT_P0_IN_P17 (0x1 << 17)
-#define PORT_P0_IN_P17_GET(val) ((((val) & PORT_P0_IN_P17) >> 17) & 0x1)
-/* Port 0 Pin # Latched Input Value (16) */
-#define PORT_P0_IN_P16 (0x1 << 16)
-#define PORT_P0_IN_P16_GET(val) ((((val) & PORT_P0_IN_P16) >> 16) & 0x1)
-/* Port 0 Pin # Latched Input Value (15) */
-#define PORT_P0_IN_P15 (0x1 << 15)
-#define PORT_P0_IN_P15_GET(val) ((((val) & PORT_P0_IN_P15) >> 15) & 0x1)
-/* Port 0 Pin # Latched Input Value (14) */
-#define PORT_P0_IN_P14 (0x1 << 14)
-#define PORT_P0_IN_P14_GET(val) ((((val) & PORT_P0_IN_P14) >> 14) & 0x1)
-/* Port 0 Pin # Latched Input Value (13) */
-#define PORT_P0_IN_P13 (0x1 << 13)
-#define PORT_P0_IN_P13_GET(val) ((((val) & PORT_P0_IN_P13) >> 13) & 0x1)
-/* Port 0 Pin # Latched Input Value (12) */
-#define PORT_P0_IN_P12 (0x1 << 12)
-#define PORT_P0_IN_P12_GET(val) ((((val) & PORT_P0_IN_P12) >> 12) & 0x1)
-/* Port 0 Pin # Latched Input Value (11) */
-#define PORT_P0_IN_P11 (0x1 << 11)
-#define PORT_P0_IN_P11_GET(val) ((((val) & PORT_P0_IN_P11) >> 11) & 0x1)
-/* Port 0 Pin # Latched Input Value (10) */
-#define PORT_P0_IN_P10 (0x1 << 10)
-#define PORT_P0_IN_P10_GET(val) ((((val) & PORT_P0_IN_P10) >> 10) & 0x1)
-/* Port 0 Pin # Latched Input Value (9) */
-#define PORT_P0_IN_P9 (0x1 << 9)
-#define PORT_P0_IN_P9_GET(val) ((((val) & PORT_P0_IN_P9) >> 9) & 0x1)
-/* Port 0 Pin # Latched Input Value (8) */
-#define PORT_P0_IN_P8 (0x1 << 8)
-#define PORT_P0_IN_P8_GET(val) ((((val) & PORT_P0_IN_P8) >> 8) & 0x1)
-/* Port 0 Pin # Latched Input Value (7) */
-#define PORT_P0_IN_P7 (0x1 << 7)
-#define PORT_P0_IN_P7_GET(val) ((((val) & PORT_P0_IN_P7) >> 7) & 0x1)
-/* Port 0 Pin # Latched Input Value (6) */
-#define PORT_P0_IN_P6 (0x1 << 6)
-#define PORT_P0_IN_P6_GET(val) ((((val) & PORT_P0_IN_P6) >> 6) & 0x1)
-/* Port 0 Pin # Latched Input Value (5) */
-#define PORT_P0_IN_P5 (0x1 << 5)
-#define PORT_P0_IN_P5_GET(val) ((((val) & PORT_P0_IN_P5) >> 5) & 0x1)
-/* Port 0 Pin # Latched Input Value (4) */
-#define PORT_P0_IN_P4 (0x1 << 4)
-#define PORT_P0_IN_P4_GET(val) ((((val) & PORT_P0_IN_P4) >> 4) & 0x1)
-/* Port 0 Pin # Latched Input Value (3) */
-#define PORT_P0_IN_P3 (0x1 << 3)
-#define PORT_P0_IN_P3_GET(val) ((((val) & PORT_P0_IN_P3) >> 3) & 0x1)
-/* Port 0 Pin # Latched Input Value (2) */
-#define PORT_P0_IN_P2 (0x1 << 2)
-#define PORT_P0_IN_P2_GET(val) ((((val) & PORT_P0_IN_P2) >> 2) & 0x1)
-/* Port 0 Pin # Latched Input Value (1) */
-#define PORT_P0_IN_P1 (0x1 << 1)
-#define PORT_P0_IN_P1_GET(val) ((((val) & PORT_P0_IN_P1) >> 1) & 0x1)
-/* Port 0 Pin # Latched Input Value (0) */
-#define PORT_P0_IN_P0 (0x1)
-#define PORT_P0_IN_P0_GET(val) ((((val) & PORT_P0_IN_P0) >> 0) & 0x1)
-
-/*******************************************************************************
- * Port 0 Direction Register
- ******************************************************************************/
-
-/* Port 0 Pin #Direction Control (19) */
-#define PORT_P0_DIR_P19 (0x1 << 19)
-#define PORT_P0_DIR_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P0_DIR_P19_GET(val) ((((val) & PORT_P0_DIR_P19) >> 19) & 0x1)
-#define PORT_P0_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P19) | (((val) & 0x1) << 19))
-/* Port 0 Pin #Direction Control (18) */
-#define PORT_P0_DIR_P18 (0x1 << 18)
-#define PORT_P0_DIR_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P0_DIR_P18_GET(val) ((((val) & PORT_P0_DIR_P18) >> 18) & 0x1)
-#define PORT_P0_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P18) | (((val) & 0x1) << 18))
-/* Port 0 Pin #Direction Control (17) */
-#define PORT_P0_DIR_P17 (0x1 << 17)
-#define PORT_P0_DIR_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P0_DIR_P17_GET(val) ((((val) & PORT_P0_DIR_P17) >> 17) & 0x1)
-#define PORT_P0_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P17) | (((val) & 0x1) << 17))
-/* Port 0 Pin #Direction Control (16) */
-#define PORT_P0_DIR_P16 (0x1 << 16)
-#define PORT_P0_DIR_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P0_DIR_P16_GET(val) ((((val) & PORT_P0_DIR_P16) >> 16) & 0x1)
-#define PORT_P0_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P16) | (((val) & 0x1) << 16))
-/* Port 0 Pin #Direction Control (15) */
-#define PORT_P0_DIR_P15 (0x1 << 15)
-#define PORT_P0_DIR_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P0_DIR_P15_GET(val) ((((val) & PORT_P0_DIR_P15) >> 15) & 0x1)
-#define PORT_P0_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P15) | (((val) & 0x1) << 15))
-/* Port 0 Pin #Direction Control (14) */
-#define PORT_P0_DIR_P14 (0x1 << 14)
-#define PORT_P0_DIR_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P0_DIR_P14_GET(val) ((((val) & PORT_P0_DIR_P14) >> 14) & 0x1)
-#define PORT_P0_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P14) | (((val) & 0x1) << 14))
-/* Port 0 Pin #Direction Control (13) */
-#define PORT_P0_DIR_P13 (0x1 << 13)
-#define PORT_P0_DIR_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_DIR_P13_GET(val) ((((val) & PORT_P0_DIR_P13) >> 13) & 0x1)
-#define PORT_P0_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P13) | (((val) & 0x1) << 13))
-/* Port 0 Pin #Direction Control (12) */
-#define PORT_P0_DIR_P12 (0x1 << 12)
-#define PORT_P0_DIR_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_DIR_P12_GET(val) ((((val) & PORT_P0_DIR_P12) >> 12) & 0x1)
-#define PORT_P0_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P12) | (((val) & 0x1) << 12))
-/* Port 0 Pin #Direction Control (11) */
-#define PORT_P0_DIR_P11 (0x1 << 11)
-#define PORT_P0_DIR_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_DIR_P11_GET(val) ((((val) & PORT_P0_DIR_P11) >> 11) & 0x1)
-#define PORT_P0_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P11) | (((val) & 0x1) << 11))
-/* Port 0 Pin #Direction Control (10) */
-#define PORT_P0_DIR_P10 (0x1 << 10)
-#define PORT_P0_DIR_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_DIR_P10_GET(val) ((((val) & PORT_P0_DIR_P10) >> 10) & 0x1)
-#define PORT_P0_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P10) | (((val) & 0x1) << 10))
-/* Port 0 Pin #Direction Control (9) */
-#define PORT_P0_DIR_P9 (0x1 << 9)
-#define PORT_P0_DIR_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_DIR_P9_GET(val) ((((val) & PORT_P0_DIR_P9) >> 9) & 0x1)
-#define PORT_P0_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P9) | (((val) & 0x1) << 9))
-/* Port 0 Pin #Direction Control (8) */
-#define PORT_P0_DIR_P8 (0x1 << 8)
-#define PORT_P0_DIR_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_DIR_P8_GET(val) ((((val) & PORT_P0_DIR_P8) >> 8) & 0x1)
-#define PORT_P0_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P8) | (((val) & 0x1) << 8))
-/* Port 0 Pin #Direction Control (7) */
-#define PORT_P0_DIR_P7 (0x1 << 7)
-#define PORT_P0_DIR_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_DIR_P7_GET(val) ((((val) & PORT_P0_DIR_P7) >> 7) & 0x1)
-#define PORT_P0_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P7) | (((val) & 0x1) << 7))
-/* Port 0 Pin #Direction Control (6) */
-#define PORT_P0_DIR_P6 (0x1 << 6)
-#define PORT_P0_DIR_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P0_DIR_P6_GET(val) ((((val) & PORT_P0_DIR_P6) >> 6) & 0x1)
-#define PORT_P0_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P6) | (((val) & 0x1) << 6))
-/* Port 0 Pin #Direction Control (5) */
-#define PORT_P0_DIR_P5 (0x1 << 5)
-#define PORT_P0_DIR_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P0_DIR_P5_GET(val) ((((val) & PORT_P0_DIR_P5) >> 5) & 0x1)
-#define PORT_P0_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P5) | (((val) & 0x1) << 5))
-/* Port 0 Pin #Direction Control (4) */
-#define PORT_P0_DIR_P4 (0x1 << 4)
-#define PORT_P0_DIR_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P0_DIR_P4_GET(val) ((((val) & PORT_P0_DIR_P4) >> 4) & 0x1)
-#define PORT_P0_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P4) | (((val) & 0x1) << 4))
-/* Port 0 Pin #Direction Control (3) */
-#define PORT_P0_DIR_P3 (0x1 << 3)
-#define PORT_P0_DIR_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P0_DIR_P3_GET(val) ((((val) & PORT_P0_DIR_P3) >> 3) & 0x1)
-#define PORT_P0_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P3) | (((val) & 0x1) << 3))
-/* Port 0 Pin #Direction Control (2) */
-#define PORT_P0_DIR_P2 (0x1 << 2)
-#define PORT_P0_DIR_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P0_DIR_P2_GET(val) ((((val) & PORT_P0_DIR_P2) >> 2) & 0x1)
-#define PORT_P0_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P2) | (((val) & 0x1) << 2))
-/* Port 0 Pin #Direction Control (1) */
-#define PORT_P0_DIR_P1 (0x1 << 1)
-#define PORT_P0_DIR_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P0_DIR_P1_GET(val) ((((val) & PORT_P0_DIR_P1) >> 1) & 0x1)
-#define PORT_P0_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P1) | (((val) & 0x1) << 1))
-/* Port 0 Pin #Direction Control (0) */
-#define PORT_P0_DIR_P0 (0x1)
-#define PORT_P0_DIR_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P0_DIR_P0_GET(val) ((((val) & PORT_P0_DIR_P0) >> 0) & 0x1)
-#define PORT_P0_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 0 Alternate Function Select Register 0
- ******************************************************************************/
-
-/* Alternate Function at Port 0 Bit # (19) */
-#define PORT_P0_ALTSEL0_P19 (0x1 << 19)
-#define PORT_P0_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P0_ALTSEL0_P19_GET(val) ((((val) & PORT_P0_ALTSEL0_P19) >> 19) & 0x1)
-#define PORT_P0_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P19) | (((val) & 0x1) << 19))
-/* Alternate Function at Port 0 Bit # (18) */
-#define PORT_P0_ALTSEL0_P18 (0x1 << 18)
-#define PORT_P0_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P0_ALTSEL0_P18_GET(val) ((((val) & PORT_P0_ALTSEL0_P18) >> 18) & 0x1)
-#define PORT_P0_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P18) | (((val) & 0x1) << 18))
-/* Alternate Function at Port 0 Bit # (17) */
-#define PORT_P0_ALTSEL0_P17 (0x1 << 17)
-#define PORT_P0_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P0_ALTSEL0_P17_GET(val) ((((val) & PORT_P0_ALTSEL0_P17) >> 17) & 0x1)
-#define PORT_P0_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P17) | (((val) & 0x1) << 17))
-/* Alternate Function at Port 0 Bit # (16) */
-#define PORT_P0_ALTSEL0_P16 (0x1 << 16)
-#define PORT_P0_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P0_ALTSEL0_P16_GET(val) ((((val) & PORT_P0_ALTSEL0_P16) >> 16) & 0x1)
-#define PORT_P0_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P16) | (((val) & 0x1) << 16))
-/* Alternate Function at Port 0 Bit # (15) */
-#define PORT_P0_ALTSEL0_P15 (0x1 << 15)
-#define PORT_P0_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P0_ALTSEL0_P15_GET(val) ((((val) & PORT_P0_ALTSEL0_P15) >> 15) & 0x1)
-#define PORT_P0_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P15) | (((val) & 0x1) << 15))
-/* Alternate Function at Port 0 Bit # (14) */
-#define PORT_P0_ALTSEL0_P14 (0x1 << 14)
-#define PORT_P0_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P0_ALTSEL0_P14_GET(val) ((((val) & PORT_P0_ALTSEL0_P14) >> 14) & 0x1)
-#define PORT_P0_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P14) | (((val) & 0x1) << 14))
-/* Alternate Function at Port 0 Bit # (13) */
-#define PORT_P0_ALTSEL0_P13 (0x1 << 13)
-#define PORT_P0_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_ALTSEL0_P13_GET(val) ((((val) & PORT_P0_ALTSEL0_P13) >> 13) & 0x1)
-#define PORT_P0_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P13) | (((val) & 0x1) << 13))
-/* Alternate Function at Port 0 Bit # (12) */
-#define PORT_P0_ALTSEL0_P12 (0x1 << 12)
-#define PORT_P0_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_ALTSEL0_P12_GET(val) ((((val) & PORT_P0_ALTSEL0_P12) >> 12) & 0x1)
-#define PORT_P0_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P12) | (((val) & 0x1) << 12))
-/* Alternate Function at Port 0 Bit # (11) */
-#define PORT_P0_ALTSEL0_P11 (0x1 << 11)
-#define PORT_P0_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_ALTSEL0_P11_GET(val) ((((val) & PORT_P0_ALTSEL0_P11) >> 11) & 0x1)
-#define PORT_P0_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P11) | (((val) & 0x1) << 11))
-/* Alternate Function at Port 0 Bit # (10) */
-#define PORT_P0_ALTSEL0_P10 (0x1 << 10)
-#define PORT_P0_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_ALTSEL0_P10_GET(val) ((((val) & PORT_P0_ALTSEL0_P10) >> 10) & 0x1)
-#define PORT_P0_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P10) | (((val) & 0x1) << 10))
-/* Alternate Function at Port 0 Bit # (9) */
-#define PORT_P0_ALTSEL0_P9 (0x1 << 9)
-#define PORT_P0_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_ALTSEL0_P9_GET(val) ((((val) & PORT_P0_ALTSEL0_P9) >> 9) & 0x1)
-#define PORT_P0_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P9) | (((val) & 0x1) << 9))
-/* Alternate Function at Port 0 Bit # (8) */
-#define PORT_P0_ALTSEL0_P8 (0x1 << 8)
-#define PORT_P0_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_ALTSEL0_P8_GET(val) ((((val) & PORT_P0_ALTSEL0_P8) >> 8) & 0x1)
-#define PORT_P0_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P8) | (((val) & 0x1) << 8))
-/* Alternate Function at Port 0 Bit # (7) */
-#define PORT_P0_ALTSEL0_P7 (0x1 << 7)
-#define PORT_P0_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_ALTSEL0_P7_GET(val) ((((val) & PORT_P0_ALTSEL0_P7) >> 7) & 0x1)
-#define PORT_P0_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P7) | (((val) & 0x1) << 7))
-/* Alternate Function at Port 0 Bit # (6) */
-#define PORT_P0_ALTSEL0_P6 (0x1 << 6)
-#define PORT_P0_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P0_ALTSEL0_P6_GET(val) ((((val) & PORT_P0_ALTSEL0_P6) >> 6) & 0x1)
-#define PORT_P0_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P6) | (((val) & 0x1) << 6))
-/* Alternate Function at Port 0 Bit # (5) */
-#define PORT_P0_ALTSEL0_P5 (0x1 << 5)
-#define PORT_P0_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P0_ALTSEL0_P5_GET(val) ((((val) & PORT_P0_ALTSEL0_P5) >> 5) & 0x1)
-#define PORT_P0_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P5) | (((val) & 0x1) << 5))
-/* Alternate Function at Port 0 Bit # (4) */
-#define PORT_P0_ALTSEL0_P4 (0x1 << 4)
-#define PORT_P0_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P0_ALTSEL0_P4_GET(val) ((((val) & PORT_P0_ALTSEL0_P4) >> 4) & 0x1)
-#define PORT_P0_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P4) | (((val) & 0x1) << 4))
-/* Alternate Function at Port 0 Bit # (3) */
-#define PORT_P0_ALTSEL0_P3 (0x1 << 3)
-#define PORT_P0_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P0_ALTSEL0_P3_GET(val) ((((val) & PORT_P0_ALTSEL0_P3) >> 3) & 0x1)
-#define PORT_P0_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P3) | (((val) & 0x1) << 3))
-/* Alternate Function at Port 0 Bit # (2) */
-#define PORT_P0_ALTSEL0_P2 (0x1 << 2)
-#define PORT_P0_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P0_ALTSEL0_P2_GET(val) ((((val) & PORT_P0_ALTSEL0_P2) >> 2) & 0x1)
-#define PORT_P0_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P2) | (((val) & 0x1) << 2))
-/* Alternate Function at Port 0 Bit # (1) */
-#define PORT_P0_ALTSEL0_P1 (0x1 << 1)
-#define PORT_P0_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P0_ALTSEL0_P1_GET(val) ((((val) & PORT_P0_ALTSEL0_P1) >> 1) & 0x1)
-#define PORT_P0_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P1) | (((val) & 0x1) << 1))
-/* Alternate Function at Port 0 Bit # (0) */
-#define PORT_P0_ALTSEL0_P0 (0x1)
-#define PORT_P0_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P0_ALTSEL0_P0_GET(val) ((((val) & PORT_P0_ALTSEL0_P0) >> 0) & 0x1)
-#define PORT_P0_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 0 Alternate Function Select Register 1
- ******************************************************************************/
-
-/* Alternate Function at Port 0 Bit # (13) */
-#define PORT_P0_ALTSEL1_P13 (0x1 << 13)
-#define PORT_P0_ALTSEL1_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_ALTSEL1_P13_GET(val) ((((val) & PORT_P0_ALTSEL1_P13) >> 13) & 0x1)
-#define PORT_P0_ALTSEL1_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P13) | (((val) & 0x1) << 13))
-/* Alternate Function at Port 0 Bit # (12) */
-#define PORT_P0_ALTSEL1_P12 (0x1 << 12)
-#define PORT_P0_ALTSEL1_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_ALTSEL1_P12_GET(val) ((((val) & PORT_P0_ALTSEL1_P12) >> 12) & 0x1)
-#define PORT_P0_ALTSEL1_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P12) | (((val) & 0x1) << 12))
-/* Alternate Function at Port 0 Bit # (11) */
-#define PORT_P0_ALTSEL1_P11 (0x1 << 11)
-#define PORT_P0_ALTSEL1_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_ALTSEL1_P11_GET(val) ((((val) & PORT_P0_ALTSEL1_P11) >> 11) & 0x1)
-#define PORT_P0_ALTSEL1_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P11) | (((val) & 0x1) << 11))
-/* Alternate Function at Port 0 Bit # (10) */
-#define PORT_P0_ALTSEL1_P10 (0x1 << 10)
-#define PORT_P0_ALTSEL1_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_ALTSEL1_P10_GET(val) ((((val) & PORT_P0_ALTSEL1_P10) >> 10) & 0x1)
-#define PORT_P0_ALTSEL1_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P10) | (((val) & 0x1) << 10))
-/* Alternate Function at Port 0 Bit # (9) */
-#define PORT_P0_ALTSEL1_P9 (0x1 << 9)
-#define PORT_P0_ALTSEL1_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_ALTSEL1_P9_GET(val) ((((val) & PORT_P0_ALTSEL1_P9) >> 9) & 0x1)
-#define PORT_P0_ALTSEL1_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P9) | (((val) & 0x1) << 9))
-/* Alternate Function at Port 0 Bit # (8) */
-#define PORT_P0_ALTSEL1_P8 (0x1 << 8)
-#define PORT_P0_ALTSEL1_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_ALTSEL1_P8_GET(val) ((((val) & PORT_P0_ALTSEL1_P8) >> 8) & 0x1)
-#define PORT_P0_ALTSEL1_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P8) | (((val) & 0x1) << 8))
-/* Alternate Function at Port 0 Bit # (7) */
-#define PORT_P0_ALTSEL1_P7 (0x1 << 7)
-#define PORT_P0_ALTSEL1_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_ALTSEL1_P7_GET(val) ((((val) & PORT_P0_ALTSEL1_P7) >> 7) & 0x1)
-#define PORT_P0_ALTSEL1_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P7) | (((val) & 0x1) << 7))
-/* Alternate Function at Port 0 Bit # (6) */
-#define PORT_P0_ALTSEL1_P6 (0x1 << 6)
-#define PORT_P0_ALTSEL1_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P0_ALTSEL1_P6_GET(val) ((((val) & PORT_P0_ALTSEL1_P6) >> 6) & 0x1)
-#define PORT_P0_ALTSEL1_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P6) | (((val) & 0x1) << 6))
-/* Alternate Function at Port 0 Bit # (3) */
-#define PORT_P0_ALTSEL1_P3 (0x1 << 3)
-#define PORT_P0_ALTSEL1_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P0_ALTSEL1_P3_GET(val) ((((val) & PORT_P0_ALTSEL1_P3) >> 3) & 0x1)
-#define PORT_P0_ALTSEL1_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P3) | (((val) & 0x1) << 3))
-
-/*******************************************************************************
- * Port 0 Pull Up Enable Register
- ******************************************************************************/
-
-/* Pull Up Device Enable at Port 0 Bit # (19) */
-#define PORT_P0_PUEN_P19 (0x1 << 19)
-#define PORT_P0_PUEN_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P0_PUEN_P19_GET(val) ((((val) & PORT_P0_PUEN_P19) >> 19) & 0x1)
-#define PORT_P0_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P19) | (((val) & 0x1) << 19))
-/* Pull Up Device Enable at Port 0 Bit # (18) */
-#define PORT_P0_PUEN_P18 (0x1 << 18)
-#define PORT_P0_PUEN_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P0_PUEN_P18_GET(val) ((((val) & PORT_P0_PUEN_P18) >> 18) & 0x1)
-#define PORT_P0_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P18) | (((val) & 0x1) << 18))
-/* Pull Up Device Enable at Port 0 Bit # (17) */
-#define PORT_P0_PUEN_P17 (0x1 << 17)
-#define PORT_P0_PUEN_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P0_PUEN_P17_GET(val) ((((val) & PORT_P0_PUEN_P17) >> 17) & 0x1)
-#define PORT_P0_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P17) | (((val) & 0x1) << 17))
-/* Pull Up Device Enable at Port 0 Bit # (16) */
-#define PORT_P0_PUEN_P16 (0x1 << 16)
-#define PORT_P0_PUEN_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P0_PUEN_P16_GET(val) ((((val) & PORT_P0_PUEN_P16) >> 16) & 0x1)
-#define PORT_P0_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P16) | (((val) & 0x1) << 16))
-/* Pull Up Device Enable at Port 0 Bit # (15) */
-#define PORT_P0_PUEN_P15 (0x1 << 15)
-#define PORT_P0_PUEN_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P0_PUEN_P15_GET(val) ((((val) & PORT_P0_PUEN_P15) >> 15) & 0x1)
-#define PORT_P0_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P15) | (((val) & 0x1) << 15))
-/* Pull Up Device Enable at Port 0 Bit # (14) */
-#define PORT_P0_PUEN_P14 (0x1 << 14)
-#define PORT_P0_PUEN_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P0_PUEN_P14_GET(val) ((((val) & PORT_P0_PUEN_P14) >> 14) & 0x1)
-#define PORT_P0_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P14) | (((val) & 0x1) << 14))
-/* Pull Up Device Enable at Port 0 Bit # (13) */
-#define PORT_P0_PUEN_P13 (0x1 << 13)
-#define PORT_P0_PUEN_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_PUEN_P13_GET(val) ((((val) & PORT_P0_PUEN_P13) >> 13) & 0x1)
-#define PORT_P0_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P13) | (((val) & 0x1) << 13))
-/* Pull Up Device Enable at Port 0 Bit # (12) */
-#define PORT_P0_PUEN_P12 (0x1 << 12)
-#define PORT_P0_PUEN_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_PUEN_P12_GET(val) ((((val) & PORT_P0_PUEN_P12) >> 12) & 0x1)
-#define PORT_P0_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P12) | (((val) & 0x1) << 12))
-/* Pull Up Device Enable at Port 0 Bit # (11) */
-#define PORT_P0_PUEN_P11 (0x1 << 11)
-#define PORT_P0_PUEN_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_PUEN_P11_GET(val) ((((val) & PORT_P0_PUEN_P11) >> 11) & 0x1)
-#define PORT_P0_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P11) | (((val) & 0x1) << 11))
-/* Pull Up Device Enable at Port 0 Bit # (10) */
-#define PORT_P0_PUEN_P10 (0x1 << 10)
-#define PORT_P0_PUEN_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_PUEN_P10_GET(val) ((((val) & PORT_P0_PUEN_P10) >> 10) & 0x1)
-#define PORT_P0_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P10) | (((val) & 0x1) << 10))
-/* Pull Up Device Enable at Port 0 Bit # (9) */
-#define PORT_P0_PUEN_P9 (0x1 << 9)
-#define PORT_P0_PUEN_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_PUEN_P9_GET(val) ((((val) & PORT_P0_PUEN_P9) >> 9) & 0x1)
-#define PORT_P0_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P9) | (((val) & 0x1) << 9))
-/* Pull Up Device Enable at Port 0 Bit # (8) */
-#define PORT_P0_PUEN_P8 (0x1 << 8)
-#define PORT_P0_PUEN_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_PUEN_P8_GET(val) ((((val) & PORT_P0_PUEN_P8) >> 8) & 0x1)
-#define PORT_P0_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P8) | (((val) & 0x1) << 8))
-/* Pull Up Device Enable at Port 0 Bit # (7) */
-#define PORT_P0_PUEN_P7 (0x1 << 7)
-#define PORT_P0_PUEN_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_PUEN_P7_GET(val) ((((val) & PORT_P0_PUEN_P7) >> 7) & 0x1)
-#define PORT_P0_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P7) | (((val) & 0x1) << 7))
-/* Pull Up Device Enable at Port 0 Bit # (6) */
-#define PORT_P0_PUEN_P6 (0x1 << 6)
-#define PORT_P0_PUEN_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P0_PUEN_P6_GET(val) ((((val) & PORT_P0_PUEN_P6) >> 6) & 0x1)
-#define PORT_P0_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P6) | (((val) & 0x1) << 6))
-/* Pull Up Device Enable at Port 0 Bit # (5) */
-#define PORT_P0_PUEN_P5 (0x1 << 5)
-#define PORT_P0_PUEN_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P0_PUEN_P5_GET(val) ((((val) & PORT_P0_PUEN_P5) >> 5) & 0x1)
-#define PORT_P0_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P5) | (((val) & 0x1) << 5))
-/* Pull Up Device Enable at Port 0 Bit # (4) */
-#define PORT_P0_PUEN_P4 (0x1 << 4)
-#define PORT_P0_PUEN_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P0_PUEN_P4_GET(val) ((((val) & PORT_P0_PUEN_P4) >> 4) & 0x1)
-#define PORT_P0_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P4) | (((val) & 0x1) << 4))
-/* Pull Up Device Enable at Port 0 Bit # (3) */
-#define PORT_P0_PUEN_P3 (0x1 << 3)
-#define PORT_P0_PUEN_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P0_PUEN_P3_GET(val) ((((val) & PORT_P0_PUEN_P3) >> 3) & 0x1)
-#define PORT_P0_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P3) | (((val) & 0x1) << 3))
-/* Pull Up Device Enable at Port 0 Bit # (2) */
-#define PORT_P0_PUEN_P2 (0x1 << 2)
-#define PORT_P0_PUEN_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P0_PUEN_P2_GET(val) ((((val) & PORT_P0_PUEN_P2) >> 2) & 0x1)
-#define PORT_P0_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P2) | (((val) & 0x1) << 2))
-/* Pull Up Device Enable at Port 0 Bit # (1) */
-#define PORT_P0_PUEN_P1 (0x1 << 1)
-#define PORT_P0_PUEN_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P0_PUEN_P1_GET(val) ((((val) & PORT_P0_PUEN_P1) >> 1) & 0x1)
-#define PORT_P0_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P1) | (((val) & 0x1) << 1))
-/* Pull Up Device Enable at Port 0 Bit # (0) */
-#define PORT_P0_PUEN_P0 (0x1)
-#define PORT_P0_PUEN_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P0_PUEN_P0_GET(val) ((((val) & PORT_P0_PUEN_P0) >> 0) & 0x1)
-#define PORT_P0_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * External Interrupt Control Register 0
- ******************************************************************************/
-
-/* Type of Level or Edge Detection of EXINT16 (19) */
-#define PORT_P0_EXINTCR0_EXINT16 (0x1 << 19)
-#define PORT_P0_EXINTCR0_EXINT16_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P0_EXINTCR0_EXINT16_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT16) >> 19) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT16) | (((val) & 0x1) << 19))
-/* Type of Level or Edge Detection of EXINT10 (17) */
-#define PORT_P0_EXINTCR0_EXINT10 (0x1 << 17)
-#define PORT_P0_EXINTCR0_EXINT10_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P0_EXINTCR0_EXINT10_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT10) >> 17) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT10) | (((val) & 0x1) << 17))
-/* Type of Level or Edge Detection of EXINT9 (16) */
-#define PORT_P0_EXINTCR0_EXINT9 (0x1 << 16)
-#define PORT_P0_EXINTCR0_EXINT9_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P0_EXINTCR0_EXINT9_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT9) >> 16) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT9) | (((val) & 0x1) << 16))
-/* Type of Level or Edge Detection of EXINT8 (15) */
-#define PORT_P0_EXINTCR0_EXINT8 (0x1 << 15)
-#define PORT_P0_EXINTCR0_EXINT8_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P0_EXINTCR0_EXINT8_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT8) >> 15) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT8) | (((val) & 0x1) << 15))
-/* Type of Level or Edge Detection of EXINT7 (14) */
-#define PORT_P0_EXINTCR0_EXINT7 (0x1 << 14)
-#define PORT_P0_EXINTCR0_EXINT7_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P0_EXINTCR0_EXINT7_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT7) >> 14) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT7) | (((val) & 0x1) << 14))
-/* Type of Level or Edge Detection of EXINT6 (13) */
-#define PORT_P0_EXINTCR0_EXINT6 (0x1 << 13)
-#define PORT_P0_EXINTCR0_EXINT6_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_EXINTCR0_EXINT6_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT6) >> 13) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT6) | (((val) & 0x1) << 13))
-/* Type of Level or Edge Detection of EXINT5 (12) */
-#define PORT_P0_EXINTCR0_EXINT5 (0x1 << 12)
-#define PORT_P0_EXINTCR0_EXINT5_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_EXINTCR0_EXINT5_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT5) >> 12) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT5) | (((val) & 0x1) << 12))
-/* Type of Level or Edge Detection of EXINT4 (11) */
-#define PORT_P0_EXINTCR0_EXINT4 (0x1 << 11)
-#define PORT_P0_EXINTCR0_EXINT4_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_EXINTCR0_EXINT4_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT4) >> 11) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT4) | (((val) & 0x1) << 11))
-/* Type of Level or Edge Detection of EXINT3 (10) */
-#define PORT_P0_EXINTCR0_EXINT3 (0x1 << 10)
-#define PORT_P0_EXINTCR0_EXINT3_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_EXINTCR0_EXINT3_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT3) >> 10) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT3) | (((val) & 0x1) << 10))
-/* Type of Level or Edge Detection of EXINT2 (9) */
-#define PORT_P0_EXINTCR0_EXINT2 (0x1 << 9)
-#define PORT_P0_EXINTCR0_EXINT2_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_EXINTCR0_EXINT2_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT2) >> 9) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT2) | (((val) & 0x1) << 9))
-/* Type of Level or Edge Detection of EXINT1 (8) */
-#define PORT_P0_EXINTCR0_EXINT1 (0x1 << 8)
-#define PORT_P0_EXINTCR0_EXINT1_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_EXINTCR0_EXINT1_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT1) >> 8) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT1) | (((val) & 0x1) << 8))
-/* Type of Level or Edge Detection of EXINT0 (7) */
-#define PORT_P0_EXINTCR0_EXINT0 (0x1 << 7)
-#define PORT_P0_EXINTCR0_EXINT0_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_EXINTCR0_EXINT0_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT0) >> 7) & 0x1)
-#define PORT_P0_EXINTCR0_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT0) | (((val) & 0x1) << 7))
-
-/*******************************************************************************
- * External Interrupt Control Register 1
- ******************************************************************************/
-
-/* Type of Level or Edge Detection of EXINT16 (19) */
-#define PORT_P0_EXINTCR1_EXINT16 (0x1 << 19)
-#define PORT_P0_EXINTCR1_EXINT16_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P0_EXINTCR1_EXINT16_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT16) >> 19) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT16) | (((val) & 0x1) << 19))
-/* Type of Level or Edge Detection of EXINT10 (17) */
-#define PORT_P0_EXINTCR1_EXINT10 (0x1 << 17)
-#define PORT_P0_EXINTCR1_EXINT10_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P0_EXINTCR1_EXINT10_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT10) >> 17) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT10) | (((val) & 0x1) << 17))
-/* Type of Level or Edge Detection of EXINT9 (16) */
-#define PORT_P0_EXINTCR1_EXINT9 (0x1 << 16)
-#define PORT_P0_EXINTCR1_EXINT9_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P0_EXINTCR1_EXINT9_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT9) >> 16) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT9) | (((val) & 0x1) << 16))
-/* Type of Level or Edge Detection of EXINT8 (15) */
-#define PORT_P0_EXINTCR1_EXINT8 (0x1 << 15)
-#define PORT_P0_EXINTCR1_EXINT8_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P0_EXINTCR1_EXINT8_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT8) >> 15) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT8) | (((val) & 0x1) << 15))
-/* Type of Level or Edge Detection of EXINT7 (14) */
-#define PORT_P0_EXINTCR1_EXINT7 (0x1 << 14)
-#define PORT_P0_EXINTCR1_EXINT7_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P0_EXINTCR1_EXINT7_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT7) >> 14) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT7) | (((val) & 0x1) << 14))
-/* Type of Level or Edge Detection of EXINT6 (13) */
-#define PORT_P0_EXINTCR1_EXINT6 (0x1 << 13)
-#define PORT_P0_EXINTCR1_EXINT6_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_EXINTCR1_EXINT6_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT6) >> 13) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT6) | (((val) & 0x1) << 13))
-/* Type of Level or Edge Detection of EXINT5 (12) */
-#define PORT_P0_EXINTCR1_EXINT5 (0x1 << 12)
-#define PORT_P0_EXINTCR1_EXINT5_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_EXINTCR1_EXINT5_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT5) >> 12) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT5) | (((val) & 0x1) << 12))
-/* Type of Level or Edge Detection of EXINT4 (11) */
-#define PORT_P0_EXINTCR1_EXINT4 (0x1 << 11)
-#define PORT_P0_EXINTCR1_EXINT4_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_EXINTCR1_EXINT4_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT4) >> 11) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT4) | (((val) & 0x1) << 11))
-/* Type of Level or Edge Detection of EXINT3 (10) */
-#define PORT_P0_EXINTCR1_EXINT3 (0x1 << 10)
-#define PORT_P0_EXINTCR1_EXINT3_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_EXINTCR1_EXINT3_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT3) >> 10) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT3) | (((val) & 0x1) << 10))
-/* Type of Level or Edge Detection of EXINT2 (9) */
-#define PORT_P0_EXINTCR1_EXINT2 (0x1 << 9)
-#define PORT_P0_EXINTCR1_EXINT2_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_EXINTCR1_EXINT2_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT2) >> 9) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT2) | (((val) & 0x1) << 9))
-/* Type of Level or Edge Detection of EXINT1 (8) */
-#define PORT_P0_EXINTCR1_EXINT1 (0x1 << 8)
-#define PORT_P0_EXINTCR1_EXINT1_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_EXINTCR1_EXINT1_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT1) >> 8) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT1) | (((val) & 0x1) << 8))
-/* Type of Level or Edge Detection of EXINT0 (7) */
-#define PORT_P0_EXINTCR1_EXINT0 (0x1 << 7)
-#define PORT_P0_EXINTCR1_EXINT0_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_EXINTCR1_EXINT0_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT0) >> 7) & 0x1)
-#define PORT_P0_EXINTCR1_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT0) | (((val) & 0x1) << 7))
-
-/*******************************************************************************
- * P0_IRNEN Register
- ******************************************************************************/
-
-/* EXINT16 Interrupt Request Enable (19) */
-#define PORT_P0_IRNEN_EXINT16 (0x1 << 19)
-#define PORT_P0_IRNEN_EXINT16_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P0_IRNEN_EXINT16_GET(val) ((((val) & PORT_P0_IRNEN_EXINT16) >> 19) & 0x1)
-#define PORT_P0_IRNEN_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT16) | (((val) & 0x1) << 19))
-/* EXINT10 Interrupt Request Enable (17) */
-#define PORT_P0_IRNEN_EXINT10 (0x1 << 17)
-#define PORT_P0_IRNEN_EXINT10_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P0_IRNEN_EXINT10_GET(val) ((((val) & PORT_P0_IRNEN_EXINT10) >> 17) & 0x1)
-#define PORT_P0_IRNEN_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT10) | (((val) & 0x1) << 17))
-/* EXINT9 Interrupt Request Enable (16) */
-#define PORT_P0_IRNEN_EXINT9 (0x1 << 16)
-#define PORT_P0_IRNEN_EXINT9_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P0_IRNEN_EXINT9_GET(val) ((((val) & PORT_P0_IRNEN_EXINT9) >> 16) & 0x1)
-#define PORT_P0_IRNEN_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT9) | (((val) & 0x1) << 16))
-/* EXINT8 Interrupt Request Enable (15) */
-#define PORT_P0_IRNEN_EXINT8 (0x1 << 15)
-#define PORT_P0_IRNEN_EXINT8_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P0_IRNEN_EXINT8_GET(val) ((((val) & PORT_P0_IRNEN_EXINT8) >> 15) & 0x1)
-#define PORT_P0_IRNEN_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT8) | (((val) & 0x1) << 15))
-/* EXINT7 Interrupt Request Enable (14) */
-#define PORT_P0_IRNEN_EXINT7 (0x1 << 14)
-#define PORT_P0_IRNEN_EXINT7_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P0_IRNEN_EXINT7_GET(val) ((((val) & PORT_P0_IRNEN_EXINT7) >> 14) & 0x1)
-#define PORT_P0_IRNEN_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT7) | (((val) & 0x1) << 14))
-/* EXINT6 Interrupt Request Enable (13) */
-#define PORT_P0_IRNEN_EXINT6 (0x1 << 13)
-#define PORT_P0_IRNEN_EXINT6_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_IRNEN_EXINT6_GET(val) ((((val) & PORT_P0_IRNEN_EXINT6) >> 13) & 0x1)
-#define PORT_P0_IRNEN_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT6) | (((val) & 0x1) << 13))
-/* EXINT5 Interrupt Request Enable (12) */
-#define PORT_P0_IRNEN_EXINT5 (0x1 << 12)
-#define PORT_P0_IRNEN_EXINT5_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_IRNEN_EXINT5_GET(val) ((((val) & PORT_P0_IRNEN_EXINT5) >> 12) & 0x1)
-#define PORT_P0_IRNEN_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT5) | (((val) & 0x1) << 12))
-/* EXINT4 Interrupt Request Enable (11) */
-#define PORT_P0_IRNEN_EXINT4 (0x1 << 11)
-#define PORT_P0_IRNEN_EXINT4_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_IRNEN_EXINT4_GET(val) ((((val) & PORT_P0_IRNEN_EXINT4) >> 11) & 0x1)
-#define PORT_P0_IRNEN_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT4) | (((val) & 0x1) << 11))
-/* EXINT3 Interrupt Request Enable (10) */
-#define PORT_P0_IRNEN_EXINT3 (0x1 << 10)
-#define PORT_P0_IRNEN_EXINT3_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_IRNEN_EXINT3_GET(val) ((((val) & PORT_P0_IRNEN_EXINT3) >> 10) & 0x1)
-#define PORT_P0_IRNEN_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT3) | (((val) & 0x1) << 10))
-/* EXINT2 Interrupt Request Enable (9) */
-#define PORT_P0_IRNEN_EXINT2 (0x1 << 9)
-#define PORT_P0_IRNEN_EXINT2_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_IRNEN_EXINT2_GET(val) ((((val) & PORT_P0_IRNEN_EXINT2) >> 9) & 0x1)
-#define PORT_P0_IRNEN_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT2) | (((val) & 0x1) << 9))
-/* EXINT1 Interrupt Request Enable (8) */
-#define PORT_P0_IRNEN_EXINT1 (0x1 << 8)
-#define PORT_P0_IRNEN_EXINT1_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_IRNEN_EXINT1_GET(val) ((((val) & PORT_P0_IRNEN_EXINT1) >> 8) & 0x1)
-#define PORT_P0_IRNEN_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT1) | (((val) & 0x1) << 8))
-/* EXINT0 Interrupt Request Enable (7) */
-#define PORT_P0_IRNEN_EXINT0 (0x1 << 7)
-#define PORT_P0_IRNEN_EXINT0_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_IRNEN_EXINT0_GET(val) ((((val) & PORT_P0_IRNEN_EXINT0) >> 7) & 0x1)
-#define PORT_P0_IRNEN_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT0) | (((val) & 0x1) << 7))
-
-/*******************************************************************************
- * P0_IRNICR Register
- ******************************************************************************/
-
-/* EXINT16 Interrupt Request (19) */
-#define PORT_P0_IRNICR_EXINT16 (0x1 << 19)
-#define PORT_P0_IRNICR_EXINT16_GET(val) ((((val) & PORT_P0_IRNICR_EXINT16) >> 19) & 0x1)
-/* EXINT10 Interrupt Request (17) */
-#define PORT_P0_IRNICR_EXINT10 (0x1 << 17)
-#define PORT_P0_IRNICR_EXINT10_GET(val) ((((val) & PORT_P0_IRNICR_EXINT10) >> 17) & 0x1)
-/* EXINT9 Interrupt Request (16) */
-#define PORT_P0_IRNICR_EXINT9 (0x1 << 16)
-#define PORT_P0_IRNICR_EXINT9_GET(val) ((((val) & PORT_P0_IRNICR_EXINT9) >> 16) & 0x1)
-/* EXINT8 Interrupt Request (15) */
-#define PORT_P0_IRNICR_EXINT8 (0x1 << 15)
-#define PORT_P0_IRNICR_EXINT8_GET(val) ((((val) & PORT_P0_IRNICR_EXINT8) >> 15) & 0x1)
-/* EXINT7 Interrupt Request (14) */
-#define PORT_P0_IRNICR_EXINT7 (0x1 << 14)
-#define PORT_P0_IRNICR_EXINT7_GET(val) ((((val) & PORT_P0_IRNICR_EXINT7) >> 14) & 0x1)
-/* EXINT6 Interrupt Request (13) */
-#define PORT_P0_IRNICR_EXINT6 (0x1 << 13)
-#define PORT_P0_IRNICR_EXINT6_GET(val) ((((val) & PORT_P0_IRNICR_EXINT6) >> 13) & 0x1)
-/* EXINT5 Interrupt Request (12) */
-#define PORT_P0_IRNICR_EXINT5 (0x1 << 12)
-#define PORT_P0_IRNICR_EXINT5_GET(val) ((((val) & PORT_P0_IRNICR_EXINT5) >> 12) & 0x1)
-/* EXINT4 Interrupt Request (11) */
-#define PORT_P0_IRNICR_EXINT4 (0x1 << 11)
-#define PORT_P0_IRNICR_EXINT4_GET(val) ((((val) & PORT_P0_IRNICR_EXINT4) >> 11) & 0x1)
-/* EXINT3 Interrupt Request (10) */
-#define PORT_P0_IRNICR_EXINT3 (0x1 << 10)
-#define PORT_P0_IRNICR_EXINT3_GET(val) ((((val) & PORT_P0_IRNICR_EXINT3) >> 10) & 0x1)
-/* EXINT2 Interrupt Request (9) */
-#define PORT_P0_IRNICR_EXINT2 (0x1 << 9)
-#define PORT_P0_IRNICR_EXINT2_GET(val) ((((val) & PORT_P0_IRNICR_EXINT2) >> 9) & 0x1)
-/* EXINT1 Interrupt Request (8) */
-#define PORT_P0_IRNICR_EXINT1 (0x1 << 8)
-#define PORT_P0_IRNICR_EXINT1_GET(val) ((((val) & PORT_P0_IRNICR_EXINT1) >> 8) & 0x1)
-/* EXINT0 Interrupt Request (7) */
-#define PORT_P0_IRNICR_EXINT0 (0x1 << 7)
-#define PORT_P0_IRNICR_EXINT0_GET(val) ((((val) & PORT_P0_IRNICR_EXINT0) >> 7) & 0x1)
-
-/*******************************************************************************
- * P0_IRNCR Register
- ******************************************************************************/
-
-/* EXINT16 Interrupt Request (19) */
-#define PORT_P0_IRNCR_EXINT16 (0x1 << 19)
-#define PORT_P0_IRNCR_EXINT16_GET(val) ((((val) & PORT_P0_IRNCR_EXINT16) >> 19) & 0x1)
-/* EXINT10 Interrupt Request (17) */
-#define PORT_P0_IRNCR_EXINT10 (0x1 << 17)
-#define PORT_P0_IRNCR_EXINT10_GET(val) ((((val) & PORT_P0_IRNCR_EXINT10) >> 17) & 0x1)
-/* EXINT9 Interrupt Request (16) */
-#define PORT_P0_IRNCR_EXINT9 (0x1 << 16)
-#define PORT_P0_IRNCR_EXINT9_GET(val) ((((val) & PORT_P0_IRNCR_EXINT9) >> 16) & 0x1)
-/* EXINT8 Interrupt Request (15) */
-#define PORT_P0_IRNCR_EXINT8 (0x1 << 15)
-#define PORT_P0_IRNCR_EXINT8_GET(val) ((((val) & PORT_P0_IRNCR_EXINT8) >> 15) & 0x1)
-/* EXINT7 Interrupt Request (14) */
-#define PORT_P0_IRNCR_EXINT7 (0x1 << 14)
-#define PORT_P0_IRNCR_EXINT7_GET(val) ((((val) & PORT_P0_IRNCR_EXINT7) >> 14) & 0x1)
-/* EXINT6 Interrupt Request (13) */
-#define PORT_P0_IRNCR_EXINT6 (0x1 << 13)
-#define PORT_P0_IRNCR_EXINT6_GET(val) ((((val) & PORT_P0_IRNCR_EXINT6) >> 13) & 0x1)
-/* EXINT5 Interrupt Request (12) */
-#define PORT_P0_IRNCR_EXINT5 (0x1 << 12)
-#define PORT_P0_IRNCR_EXINT5_GET(val) ((((val) & PORT_P0_IRNCR_EXINT5) >> 12) & 0x1)
-/* EXINT4 Interrupt Request (11) */
-#define PORT_P0_IRNCR_EXINT4 (0x1 << 11)
-#define PORT_P0_IRNCR_EXINT4_GET(val) ((((val) & PORT_P0_IRNCR_EXINT4) >> 11) & 0x1)
-/* EXINT3 Interrupt Request (10) */
-#define PORT_P0_IRNCR_EXINT3 (0x1 << 10)
-#define PORT_P0_IRNCR_EXINT3_GET(val) ((((val) & PORT_P0_IRNCR_EXINT3) >> 10) & 0x1)
-/* EXINT2 Interrupt Request (9) */
-#define PORT_P0_IRNCR_EXINT2 (0x1 << 9)
-#define PORT_P0_IRNCR_EXINT2_GET(val) ((((val) & PORT_P0_IRNCR_EXINT2) >> 9) & 0x1)
-/* EXINT1 Interrupt Request (8) */
-#define PORT_P0_IRNCR_EXINT1 (0x1 << 8)
-#define PORT_P0_IRNCR_EXINT1_GET(val) ((((val) & PORT_P0_IRNCR_EXINT1) >> 8) & 0x1)
-/* EXINT0 Interrupt Request (7) */
-#define PORT_P0_IRNCR_EXINT0 (0x1 << 7)
-#define PORT_P0_IRNCR_EXINT0_GET(val) ((((val) & PORT_P0_IRNCR_EXINT0) >> 7) & 0x1)
-
-/*******************************************************************************
- * P0 External Event Detection Configuration Register
- ******************************************************************************/
-
-/* EXINT16 configured for Edge or Level Detection (19) */
-#define PORT_P0_IRNCFG_EXINT16 (0x1 << 19)
-#define PORT_P0_IRNCFG_EXINT16_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P0_IRNCFG_EXINT16_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT16) >> 19) & 0x1)
-#define PORT_P0_IRNCFG_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT16) | (((val) & 0x1) << 19))
-/* EXINT10 configured for Edge or Level Detection (17) */
-#define PORT_P0_IRNCFG_EXINT10 (0x1 << 17)
-#define PORT_P0_IRNCFG_EXINT10_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P0_IRNCFG_EXINT10_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT10) >> 17) & 0x1)
-#define PORT_P0_IRNCFG_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT10) | (((val) & 0x1) << 17))
-/* EXINT9 configured for Edge or Level Detection (16) */
-#define PORT_P0_IRNCFG_EXINT9 (0x1 << 16)
-#define PORT_P0_IRNCFG_EXINT9_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P0_IRNCFG_EXINT9_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT9) >> 16) & 0x1)
-#define PORT_P0_IRNCFG_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT9) | (((val) & 0x1) << 16))
-/* EXINT8 configured for Edge or Level Detection (15) */
-#define PORT_P0_IRNCFG_EXINT8 (0x1 << 15)
-#define PORT_P0_IRNCFG_EXINT8_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P0_IRNCFG_EXINT8_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT8) >> 15) & 0x1)
-#define PORT_P0_IRNCFG_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT8) | (((val) & 0x1) << 15))
-/* EXINT7 configured for Edge or Level Detection (14) */
-#define PORT_P0_IRNCFG_EXINT7 (0x1 << 14)
-#define PORT_P0_IRNCFG_EXINT7_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P0_IRNCFG_EXINT7_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT7) >> 14) & 0x1)
-#define PORT_P0_IRNCFG_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT7) | (((val) & 0x1) << 14))
-/* EXINT6 configured for Edge or Level Detection (13) */
-#define PORT_P0_IRNCFG_EXINT6 (0x1 << 13)
-#define PORT_P0_IRNCFG_EXINT6_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_IRNCFG_EXINT6_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT6) >> 13) & 0x1)
-#define PORT_P0_IRNCFG_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT6) | (((val) & 0x1) << 13))
-/* EXINT5 configured for Edge or Level Detection (12) */
-#define PORT_P0_IRNCFG_EXINT5 (0x1 << 12)
-#define PORT_P0_IRNCFG_EXINT5_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_IRNCFG_EXINT5_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT5) >> 12) & 0x1)
-#define PORT_P0_IRNCFG_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT5) | (((val) & 0x1) << 12))
-/* EXINT4 configured for Edge or Level Detection (11) */
-#define PORT_P0_IRNCFG_EXINT4 (0x1 << 11)
-#define PORT_P0_IRNCFG_EXINT4_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_IRNCFG_EXINT4_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT4) >> 11) & 0x1)
-#define PORT_P0_IRNCFG_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT4) | (((val) & 0x1) << 11))
-/* EXINT3 configured for Edge or Level Detection (10) */
-#define PORT_P0_IRNCFG_EXINT3 (0x1 << 10)
-#define PORT_P0_IRNCFG_EXINT3_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_IRNCFG_EXINT3_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT3) >> 10) & 0x1)
-#define PORT_P0_IRNCFG_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT3) | (((val) & 0x1) << 10))
-/* EXINT2 configured for Edge or Level Detection (9) */
-#define PORT_P0_IRNCFG_EXINT2 (0x1 << 9)
-#define PORT_P0_IRNCFG_EXINT2_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_IRNCFG_EXINT2_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT2) >> 9) & 0x1)
-#define PORT_P0_IRNCFG_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT2) | (((val) & 0x1) << 9))
-/* EXINT1 configured for Edge or Level Detection (8) */
-#define PORT_P0_IRNCFG_EXINT1 (0x1 << 8)
-#define PORT_P0_IRNCFG_EXINT1_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_IRNCFG_EXINT1_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT1) >> 8) & 0x1)
-#define PORT_P0_IRNCFG_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT1) | (((val) & 0x1) << 8))
-/* EXINT0 configured for Edge or Level Detection (7) */
-#define PORT_P0_IRNCFG_EXINT0 (0x1 << 7)
-#define PORT_P0_IRNCFG_EXINT0_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_IRNCFG_EXINT0_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT0) >> 7) & 0x1)
-#define PORT_P0_IRNCFG_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT0) | (((val) & 0x1) << 7))
-
-/*******************************************************************************
- * P0_IRNENSET Register
- ******************************************************************************/
-
-/* Set Interrupt Node Enable Flag EXINT16 (19) */
-#define PORT_P0_IRNENSET_EXINT16 (0x1 << 19)
-#define PORT_P0_IRNENSET_EXINT16_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P0_IRNENSET_EXINT16_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT16) | (val) & 1) << 19)
-/* Set Interrupt Node Enable Flag EXINT10 (17) */
-#define PORT_P0_IRNENSET_EXINT10 (0x1 << 17)
-#define PORT_P0_IRNENSET_EXINT10_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P0_IRNENSET_EXINT10_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT10) | (val) & 1) << 17)
-/* Set Interrupt Node Enable Flag EXINT9 (16) */
-#define PORT_P0_IRNENSET_EXINT9 (0x1 << 16)
-#define PORT_P0_IRNENSET_EXINT9_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P0_IRNENSET_EXINT9_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT9) | (val) & 1) << 16)
-/* Set Interrupt Node Enable Flag EXINT8 (15) */
-#define PORT_P0_IRNENSET_EXINT8 (0x1 << 15)
-#define PORT_P0_IRNENSET_EXINT8_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P0_IRNENSET_EXINT8_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT8) | (val) & 1) << 15)
-/* Set Interrupt Node Enable Flag EXINT7 (14) */
-#define PORT_P0_IRNENSET_EXINT7 (0x1 << 14)
-#define PORT_P0_IRNENSET_EXINT7_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P0_IRNENSET_EXINT7_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT7) | (val) & 1) << 14)
-/* Set Interrupt Node Enable Flag EXINT6 (13) */
-#define PORT_P0_IRNENSET_EXINT6 (0x1 << 13)
-#define PORT_P0_IRNENSET_EXINT6_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_IRNENSET_EXINT6_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT6) | (val) & 1) << 13)
-/* Set Interrupt Node Enable Flag EXINT5 (12) */
-#define PORT_P0_IRNENSET_EXINT5 (0x1 << 12)
-#define PORT_P0_IRNENSET_EXINT5_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_IRNENSET_EXINT5_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT5) | (val) & 1) << 12)
-/* Set Interrupt Node Enable Flag EXINT4 (11) */
-#define PORT_P0_IRNENSET_EXINT4 (0x1 << 11)
-#define PORT_P0_IRNENSET_EXINT4_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_IRNENSET_EXINT4_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT4) | (val) & 1) << 11)
-/* Set Interrupt Node Enable Flag EXINT3 (10) */
-#define PORT_P0_IRNENSET_EXINT3 (0x1 << 10)
-#define PORT_P0_IRNENSET_EXINT3_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_IRNENSET_EXINT3_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT3) | (val) & 1) << 10)
-/* Set Interrupt Node Enable Flag EXINT2 (9) */
-#define PORT_P0_IRNENSET_EXINT2 (0x1 << 9)
-#define PORT_P0_IRNENSET_EXINT2_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_IRNENSET_EXINT2_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT2) | (val) & 1) << 9)
-/* Set Interrupt Node Enable Flag EXINT1 (8) */
-#define PORT_P0_IRNENSET_EXINT1 (0x1 << 8)
-#define PORT_P0_IRNENSET_EXINT1_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_IRNENSET_EXINT1_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT1) | (val) & 1) << 8)
-/* Set Interrupt Node Enable Flag EXINT0 (7) */
-#define PORT_P0_IRNENSET_EXINT0 (0x1 << 7)
-#define PORT_P0_IRNENSET_EXINT0_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_IRNENSET_EXINT0_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT0) | (val) & 1) << 7)
-
-/*******************************************************************************
- * P0_IRNENCLR Register
- ******************************************************************************/
-
-/* Clear Interrupt Node Enable Flag EXINT16 (19) */
-#define PORT_P0_IRNENCLR_EXINT16 (0x1 << 19)
-#define PORT_P0_IRNENCLR_EXINT16_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P0_IRNENCLR_EXINT16_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT16) | (val) & 1) << 19)
-/* Clear Interrupt Node Enable Flag EXINT10 (17) */
-#define PORT_P0_IRNENCLR_EXINT10 (0x1 << 17)
-#define PORT_P0_IRNENCLR_EXINT10_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P0_IRNENCLR_EXINT10_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT10) | (val) & 1) << 17)
-/* Clear Interrupt Node Enable Flag EXINT9 (16) */
-#define PORT_P0_IRNENCLR_EXINT9 (0x1 << 16)
-#define PORT_P0_IRNENCLR_EXINT9_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P0_IRNENCLR_EXINT9_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT9) | (val) & 1) << 16)
-/* Clear Interrupt Node Enable Flag EXINT8 (15) */
-#define PORT_P0_IRNENCLR_EXINT8 (0x1 << 15)
-#define PORT_P0_IRNENCLR_EXINT8_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P0_IRNENCLR_EXINT8_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT8) | (val) & 1) << 15)
-/* Clear Interrupt Node Enable Flag EXINT7 (14) */
-#define PORT_P0_IRNENCLR_EXINT7 (0x1 << 14)
-#define PORT_P0_IRNENCLR_EXINT7_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P0_IRNENCLR_EXINT7_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT7) | (val) & 1) << 14)
-/* Clear Interrupt Node Enable Flag EXINT6 (13) */
-#define PORT_P0_IRNENCLR_EXINT6 (0x1 << 13)
-#define PORT_P0_IRNENCLR_EXINT6_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P0_IRNENCLR_EXINT6_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT6) | (val) & 1) << 13)
-/* Clear Interrupt Node Enable Flag EXINT5 (12) */
-#define PORT_P0_IRNENCLR_EXINT5 (0x1 << 12)
-#define PORT_P0_IRNENCLR_EXINT5_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P0_IRNENCLR_EXINT5_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT5) | (val) & 1) << 12)
-/* Clear Interrupt Node Enable Flag EXINT4 (11) */
-#define PORT_P0_IRNENCLR_EXINT4 (0x1 << 11)
-#define PORT_P0_IRNENCLR_EXINT4_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P0_IRNENCLR_EXINT4_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT4) | (val) & 1) << 11)
-/* Clear Interrupt Node Enable Flag EXINT3 (10) */
-#define PORT_P0_IRNENCLR_EXINT3 (0x1 << 10)
-#define PORT_P0_IRNENCLR_EXINT3_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P0_IRNENCLR_EXINT3_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT3) | (val) & 1) << 10)
-/* Clear Interrupt Node Enable Flag EXINT2 (9) */
-#define PORT_P0_IRNENCLR_EXINT2 (0x1 << 9)
-#define PORT_P0_IRNENCLR_EXINT2_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P0_IRNENCLR_EXINT2_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT2) | (val) & 1) << 9)
-/* Clear Interrupt Node Enable Flag EXINT1 (8) */
-#define PORT_P0_IRNENCLR_EXINT1 (0x1 << 8)
-#define PORT_P0_IRNENCLR_EXINT1_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P0_IRNENCLR_EXINT1_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT1) | (val) & 1) << 8)
-/* Clear Interrupt Node Enable Flag EXINT0 (7) */
-#define PORT_P0_IRNENCLR_EXINT0 (0x1 << 7)
-#define PORT_P0_IRNENCLR_EXINT0_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P0_IRNENCLR_EXINT0_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT0) | (val) & 1) << 7)
-
-/*******************************************************************************
- * Port 1 Data Output Register
- ******************************************************************************/
-
-/* Port 1 Pin # Output Value (19) */
-#define PORT_P1_OUT_P19 (0x1 << 19)
-#define PORT_P1_OUT_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P1_OUT_P19_GET(val) ((((val) & PORT_P1_OUT_P19) >> 19) & 0x1)
-#define PORT_P1_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P19) | (((val) & 0x1) << 19))
-/* Port 1 Pin # Output Value (18) */
-#define PORT_P1_OUT_P18 (0x1 << 18)
-#define PORT_P1_OUT_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P1_OUT_P18_GET(val) ((((val) & PORT_P1_OUT_P18) >> 18) & 0x1)
-#define PORT_P1_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P18) | (((val) & 0x1) << 18))
-/* Port 1 Pin # Output Value (17) */
-#define PORT_P1_OUT_P17 (0x1 << 17)
-#define PORT_P1_OUT_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P1_OUT_P17_GET(val) ((((val) & PORT_P1_OUT_P17) >> 17) & 0x1)
-#define PORT_P1_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P17) | (((val) & 0x1) << 17))
-/* Port 1 Pin # Output Value (16) */
-#define PORT_P1_OUT_P16 (0x1 << 16)
-#define PORT_P1_OUT_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P1_OUT_P16_GET(val) ((((val) & PORT_P1_OUT_P16) >> 16) & 0x1)
-#define PORT_P1_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P16) | (((val) & 0x1) << 16))
-/* Port 1 Pin # Output Value (15) */
-#define PORT_P1_OUT_P15 (0x1 << 15)
-#define PORT_P1_OUT_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P1_OUT_P15_GET(val) ((((val) & PORT_P1_OUT_P15) >> 15) & 0x1)
-#define PORT_P1_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P15) | (((val) & 0x1) << 15))
-/* Port 1 Pin # Output Value (14) */
-#define PORT_P1_OUT_P14 (0x1 << 14)
-#define PORT_P1_OUT_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P1_OUT_P14_GET(val) ((((val) & PORT_P1_OUT_P14) >> 14) & 0x1)
-#define PORT_P1_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P14) | (((val) & 0x1) << 14))
-/* Port 1 Pin # Output Value (13) */
-#define PORT_P1_OUT_P13 (0x1 << 13)
-#define PORT_P1_OUT_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P1_OUT_P13_GET(val) ((((val) & PORT_P1_OUT_P13) >> 13) & 0x1)
-#define PORT_P1_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P13) | (((val) & 0x1) << 13))
-/* Port 1 Pin # Output Value (12) */
-#define PORT_P1_OUT_P12 (0x1 << 12)
-#define PORT_P1_OUT_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P1_OUT_P12_GET(val) ((((val) & PORT_P1_OUT_P12) >> 12) & 0x1)
-#define PORT_P1_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P12) | (((val) & 0x1) << 12))
-/* Port 1 Pin # Output Value (11) */
-#define PORT_P1_OUT_P11 (0x1 << 11)
-#define PORT_P1_OUT_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P1_OUT_P11_GET(val) ((((val) & PORT_P1_OUT_P11) >> 11) & 0x1)
-#define PORT_P1_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P11) | (((val) & 0x1) << 11))
-/* Port 1 Pin # Output Value (10) */
-#define PORT_P1_OUT_P10 (0x1 << 10)
-#define PORT_P1_OUT_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P1_OUT_P10_GET(val) ((((val) & PORT_P1_OUT_P10) >> 10) & 0x1)
-#define PORT_P1_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P10) | (((val) & 0x1) << 10))
-/* Port 1 Pin # Output Value (9) */
-#define PORT_P1_OUT_P9 (0x1 << 9)
-#define PORT_P1_OUT_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P1_OUT_P9_GET(val) ((((val) & PORT_P1_OUT_P9) >> 9) & 0x1)
-#define PORT_P1_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P9) | (((val) & 0x1) << 9))
-/* Port 1 Pin # Output Value (8) */
-#define PORT_P1_OUT_P8 (0x1 << 8)
-#define PORT_P1_OUT_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P1_OUT_P8_GET(val) ((((val) & PORT_P1_OUT_P8) >> 8) & 0x1)
-#define PORT_P1_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P8) | (((val) & 0x1) << 8))
-/* Port 1 Pin # Output Value (7) */
-#define PORT_P1_OUT_P7 (0x1 << 7)
-#define PORT_P1_OUT_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P1_OUT_P7_GET(val) ((((val) & PORT_P1_OUT_P7) >> 7) & 0x1)
-#define PORT_P1_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P7) | (((val) & 0x1) << 7))
-/* Port 1 Pin # Output Value (6) */
-#define PORT_P1_OUT_P6 (0x1 << 6)
-#define PORT_P1_OUT_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P1_OUT_P6_GET(val) ((((val) & PORT_P1_OUT_P6) >> 6) & 0x1)
-#define PORT_P1_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P6) | (((val) & 0x1) << 6))
-/* Port 1 Pin # Output Value (5) */
-#define PORT_P1_OUT_P5 (0x1 << 5)
-#define PORT_P1_OUT_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P1_OUT_P5_GET(val) ((((val) & PORT_P1_OUT_P5) >> 5) & 0x1)
-#define PORT_P1_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P5) | (((val) & 0x1) << 5))
-/* Port 1 Pin # Output Value (4) */
-#define PORT_P1_OUT_P4 (0x1 << 4)
-#define PORT_P1_OUT_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P1_OUT_P4_GET(val) ((((val) & PORT_P1_OUT_P4) >> 4) & 0x1)
-#define PORT_P1_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P4) | (((val) & 0x1) << 4))
-/* Port 1 Pin # Output Value (3) */
-#define PORT_P1_OUT_P3 (0x1 << 3)
-#define PORT_P1_OUT_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P1_OUT_P3_GET(val) ((((val) & PORT_P1_OUT_P3) >> 3) & 0x1)
-#define PORT_P1_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P3) | (((val) & 0x1) << 3))
-/* Port 1 Pin # Output Value (2) */
-#define PORT_P1_OUT_P2 (0x1 << 2)
-#define PORT_P1_OUT_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P1_OUT_P2_GET(val) ((((val) & PORT_P1_OUT_P2) >> 2) & 0x1)
-#define PORT_P1_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P2) | (((val) & 0x1) << 2))
-/* Port 1 Pin # Output Value (1) */
-#define PORT_P1_OUT_P1 (0x1 << 1)
-#define PORT_P1_OUT_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P1_OUT_P1_GET(val) ((((val) & PORT_P1_OUT_P1) >> 1) & 0x1)
-#define PORT_P1_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P1) | (((val) & 0x1) << 1))
-/* Port 1 Pin # Output Value (0) */
-#define PORT_P1_OUT_P0 (0x1)
-#define PORT_P1_OUT_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P1_OUT_P0_GET(val) ((((val) & PORT_P1_OUT_P0) >> 0) & 0x1)
-#define PORT_P1_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 1 Data Input Register
- ******************************************************************************/
-
-/* Port 1 Pin # Latched Input Value (19) */
-#define PORT_P1_IN_P19 (0x1 << 19)
-#define PORT_P1_IN_P19_GET(val) ((((val) & PORT_P1_IN_P19) >> 19) & 0x1)
-/* Port 1 Pin # Latched Input Value (18) */
-#define PORT_P1_IN_P18 (0x1 << 18)
-#define PORT_P1_IN_P18_GET(val) ((((val) & PORT_P1_IN_P18) >> 18) & 0x1)
-/* Port 1 Pin # Latched Input Value (17) */
-#define PORT_P1_IN_P17 (0x1 << 17)
-#define PORT_P1_IN_P17_GET(val) ((((val) & PORT_P1_IN_P17) >> 17) & 0x1)
-/* Port 1 Pin # Latched Input Value (16) */
-#define PORT_P1_IN_P16 (0x1 << 16)
-#define PORT_P1_IN_P16_GET(val) ((((val) & PORT_P1_IN_P16) >> 16) & 0x1)
-/* Port 1 Pin # Latched Input Value (15) */
-#define PORT_P1_IN_P15 (0x1 << 15)
-#define PORT_P1_IN_P15_GET(val) ((((val) & PORT_P1_IN_P15) >> 15) & 0x1)
-/* Port 1 Pin # Latched Input Value (14) */
-#define PORT_P1_IN_P14 (0x1 << 14)
-#define PORT_P1_IN_P14_GET(val) ((((val) & PORT_P1_IN_P14) >> 14) & 0x1)
-/* Port 1 Pin # Latched Input Value (13) */
-#define PORT_P1_IN_P13 (0x1 << 13)
-#define PORT_P1_IN_P13_GET(val) ((((val) & PORT_P1_IN_P13) >> 13) & 0x1)
-/* Port 1 Pin # Latched Input Value (12) */
-#define PORT_P1_IN_P12 (0x1 << 12)
-#define PORT_P1_IN_P12_GET(val) ((((val) & PORT_P1_IN_P12) >> 12) & 0x1)
-/* Port 1 Pin # Latched Input Value (11) */
-#define PORT_P1_IN_P11 (0x1 << 11)
-#define PORT_P1_IN_P11_GET(val) ((((val) & PORT_P1_IN_P11) >> 11) & 0x1)
-/* Port 1 Pin # Latched Input Value (10) */
-#define PORT_P1_IN_P10 (0x1 << 10)
-#define PORT_P1_IN_P10_GET(val) ((((val) & PORT_P1_IN_P10) >> 10) & 0x1)
-/* Port 1 Pin # Latched Input Value (9) */
-#define PORT_P1_IN_P9 (0x1 << 9)
-#define PORT_P1_IN_P9_GET(val) ((((val) & PORT_P1_IN_P9) >> 9) & 0x1)
-/* Port 1 Pin # Latched Input Value (8) */
-#define PORT_P1_IN_P8 (0x1 << 8)
-#define PORT_P1_IN_P8_GET(val) ((((val) & PORT_P1_IN_P8) >> 8) & 0x1)
-/* Port 1 Pin # Latched Input Value (7) */
-#define PORT_P1_IN_P7 (0x1 << 7)
-#define PORT_P1_IN_P7_GET(val) ((((val) & PORT_P1_IN_P7) >> 7) & 0x1)
-/* Port 1 Pin # Latched Input Value (6) */
-#define PORT_P1_IN_P6 (0x1 << 6)
-#define PORT_P1_IN_P6_GET(val) ((((val) & PORT_P1_IN_P6) >> 6) & 0x1)
-/* Port 1 Pin # Latched Input Value (5) */
-#define PORT_P1_IN_P5 (0x1 << 5)
-#define PORT_P1_IN_P5_GET(val) ((((val) & PORT_P1_IN_P5) >> 5) & 0x1)
-/* Port 1 Pin # Latched Input Value (4) */
-#define PORT_P1_IN_P4 (0x1 << 4)
-#define PORT_P1_IN_P4_GET(val) ((((val) & PORT_P1_IN_P4) >> 4) & 0x1)
-/* Port 1 Pin # Latched Input Value (3) */
-#define PORT_P1_IN_P3 (0x1 << 3)
-#define PORT_P1_IN_P3_GET(val) ((((val) & PORT_P1_IN_P3) >> 3) & 0x1)
-/* Port 1 Pin # Latched Input Value (2) */
-#define PORT_P1_IN_P2 (0x1 << 2)
-#define PORT_P1_IN_P2_GET(val) ((((val) & PORT_P1_IN_P2) >> 2) & 0x1)
-/* Port 1 Pin # Latched Input Value (1) */
-#define PORT_P1_IN_P1 (0x1 << 1)
-#define PORT_P1_IN_P1_GET(val) ((((val) & PORT_P1_IN_P1) >> 1) & 0x1)
-/* Port 1 Pin # Latched Input Value (0) */
-#define PORT_P1_IN_P0 (0x1)
-#define PORT_P1_IN_P0_GET(val) ((((val) & PORT_P1_IN_P0) >> 0) & 0x1)
-
-/*******************************************************************************
- * Port 1 Direction Register
- ******************************************************************************/
-
-/* Port 1 Pin #Direction Control (19) */
-#define PORT_P1_DIR_P19 (0x1 << 19)
-#define PORT_P1_DIR_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P1_DIR_P19_GET(val) ((((val) & PORT_P1_DIR_P19) >> 19) & 0x1)
-#define PORT_P1_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P19) | (((val) & 0x1) << 19))
-/* Port 1 Pin #Direction Control (18) */
-#define PORT_P1_DIR_P18 (0x1 << 18)
-#define PORT_P1_DIR_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P1_DIR_P18_GET(val) ((((val) & PORT_P1_DIR_P18) >> 18) & 0x1)
-#define PORT_P1_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P18) | (((val) & 0x1) << 18))
-/* Port 1 Pin #Direction Control (17) */
-#define PORT_P1_DIR_P17 (0x1 << 17)
-#define PORT_P1_DIR_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P1_DIR_P17_GET(val) ((((val) & PORT_P1_DIR_P17) >> 17) & 0x1)
-#define PORT_P1_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P17) | (((val) & 0x1) << 17))
-/* Port 1 Pin #Direction Control (16) */
-#define PORT_P1_DIR_P16 (0x1 << 16)
-#define PORT_P1_DIR_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P1_DIR_P16_GET(val) ((((val) & PORT_P1_DIR_P16) >> 16) & 0x1)
-#define PORT_P1_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P16) | (((val) & 0x1) << 16))
-/* Port 1 Pin #Direction Control (15) */
-#define PORT_P1_DIR_P15 (0x1 << 15)
-#define PORT_P1_DIR_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P1_DIR_P15_GET(val) ((((val) & PORT_P1_DIR_P15) >> 15) & 0x1)
-#define PORT_P1_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P15) | (((val) & 0x1) << 15))
-/* Port 1 Pin #Direction Control (14) */
-#define PORT_P1_DIR_P14 (0x1 << 14)
-#define PORT_P1_DIR_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P1_DIR_P14_GET(val) ((((val) & PORT_P1_DIR_P14) >> 14) & 0x1)
-#define PORT_P1_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P14) | (((val) & 0x1) << 14))
-/* Port 1 Pin #Direction Control (13) */
-#define PORT_P1_DIR_P13 (0x1 << 13)
-#define PORT_P1_DIR_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P1_DIR_P13_GET(val) ((((val) & PORT_P1_DIR_P13) >> 13) & 0x1)
-#define PORT_P1_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P13) | (((val) & 0x1) << 13))
-/* Port 1 Pin #Direction Control (12) */
-#define PORT_P1_DIR_P12 (0x1 << 12)
-#define PORT_P1_DIR_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P1_DIR_P12_GET(val) ((((val) & PORT_P1_DIR_P12) >> 12) & 0x1)
-#define PORT_P1_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P12) | (((val) & 0x1) << 12))
-/* Port 1 Pin #Direction Control (11) */
-#define PORT_P1_DIR_P11 (0x1 << 11)
-#define PORT_P1_DIR_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P1_DIR_P11_GET(val) ((((val) & PORT_P1_DIR_P11) >> 11) & 0x1)
-#define PORT_P1_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P11) | (((val) & 0x1) << 11))
-/* Port 1 Pin #Direction Control (10) */
-#define PORT_P1_DIR_P10 (0x1 << 10)
-#define PORT_P1_DIR_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P1_DIR_P10_GET(val) ((((val) & PORT_P1_DIR_P10) >> 10) & 0x1)
-#define PORT_P1_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P10) | (((val) & 0x1) << 10))
-/* Port 1 Pin #Direction Control (9) */
-#define PORT_P1_DIR_P9 (0x1 << 9)
-#define PORT_P1_DIR_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P1_DIR_P9_GET(val) ((((val) & PORT_P1_DIR_P9) >> 9) & 0x1)
-#define PORT_P1_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P9) | (((val) & 0x1) << 9))
-/* Port 1 Pin #Direction Control (8) */
-#define PORT_P1_DIR_P8 (0x1 << 8)
-#define PORT_P1_DIR_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P1_DIR_P8_GET(val) ((((val) & PORT_P1_DIR_P8) >> 8) & 0x1)
-#define PORT_P1_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P8) | (((val) & 0x1) << 8))
-/* Port 1 Pin #Direction Control (7) */
-#define PORT_P1_DIR_P7 (0x1 << 7)
-#define PORT_P1_DIR_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P1_DIR_P7_GET(val) ((((val) & PORT_P1_DIR_P7) >> 7) & 0x1)
-#define PORT_P1_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P7) | (((val) & 0x1) << 7))
-/* Port 1 Pin #Direction Control (6) */
-#define PORT_P1_DIR_P6 (0x1 << 6)
-#define PORT_P1_DIR_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P1_DIR_P6_GET(val) ((((val) & PORT_P1_DIR_P6) >> 6) & 0x1)
-#define PORT_P1_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P6) | (((val) & 0x1) << 6))
-/* Port 1 Pin #Direction Control (5) */
-#define PORT_P1_DIR_P5 (0x1 << 5)
-#define PORT_P1_DIR_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P1_DIR_P5_GET(val) ((((val) & PORT_P1_DIR_P5) >> 5) & 0x1)
-#define PORT_P1_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P5) | (((val) & 0x1) << 5))
-/* Port 1 Pin #Direction Control (4) */
-#define PORT_P1_DIR_P4 (0x1 << 4)
-#define PORT_P1_DIR_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P1_DIR_P4_GET(val) ((((val) & PORT_P1_DIR_P4) >> 4) & 0x1)
-#define PORT_P1_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P4) | (((val) & 0x1) << 4))
-/* Port 1 Pin #Direction Control (3) */
-#define PORT_P1_DIR_P3 (0x1 << 3)
-#define PORT_P1_DIR_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P1_DIR_P3_GET(val) ((((val) & PORT_P1_DIR_P3) >> 3) & 0x1)
-#define PORT_P1_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P3) | (((val) & 0x1) << 3))
-/* Port 1 Pin #Direction Control (2) */
-#define PORT_P1_DIR_P2 (0x1 << 2)
-#define PORT_P1_DIR_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P1_DIR_P2_GET(val) ((((val) & PORT_P1_DIR_P2) >> 2) & 0x1)
-#define PORT_P1_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P2) | (((val) & 0x1) << 2))
-/* Port 1 Pin #Direction Control (1) */
-#define PORT_P1_DIR_P1 (0x1 << 1)
-#define PORT_P1_DIR_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P1_DIR_P1_GET(val) ((((val) & PORT_P1_DIR_P1) >> 1) & 0x1)
-#define PORT_P1_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P1) | (((val) & 0x1) << 1))
-/* Port 1 Pin #Direction Control (0) */
-#define PORT_P1_DIR_P0 (0x1)
-#define PORT_P1_DIR_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P1_DIR_P0_GET(val) ((((val) & PORT_P1_DIR_P0) >> 0) & 0x1)
-#define PORT_P1_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 1 Alternate Function Select Register 0
- ******************************************************************************/
-
-/* Alternate Function at Port 1 Bit # (19) */
-#define PORT_P1_ALTSEL0_P19 (0x1 << 19)
-#define PORT_P1_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P1_ALTSEL0_P19_GET(val) ((((val) & PORT_P1_ALTSEL0_P19) >> 19) & 0x1)
-#define PORT_P1_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P19) | (((val) & 0x1) << 19))
-/* Alternate Function at Port 1 Bit # (18) */
-#define PORT_P1_ALTSEL0_P18 (0x1 << 18)
-#define PORT_P1_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P1_ALTSEL0_P18_GET(val) ((((val) & PORT_P1_ALTSEL0_P18) >> 18) & 0x1)
-#define PORT_P1_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P18) | (((val) & 0x1) << 18))
-/* Alternate Function at Port 1 Bit # (17) */
-#define PORT_P1_ALTSEL0_P17 (0x1 << 17)
-#define PORT_P1_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P1_ALTSEL0_P17_GET(val) ((((val) & PORT_P1_ALTSEL0_P17) >> 17) & 0x1)
-#define PORT_P1_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P17) | (((val) & 0x1) << 17))
-/* Alternate Function at Port 1 Bit # (16) */
-#define PORT_P1_ALTSEL0_P16 (0x1 << 16)
-#define PORT_P1_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P1_ALTSEL0_P16_GET(val) ((((val) & PORT_P1_ALTSEL0_P16) >> 16) & 0x1)
-#define PORT_P1_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P16) | (((val) & 0x1) << 16))
-/* Alternate Function at Port 1 Bit # (15) */
-#define PORT_P1_ALTSEL0_P15 (0x1 << 15)
-#define PORT_P1_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P1_ALTSEL0_P15_GET(val) ((((val) & PORT_P1_ALTSEL0_P15) >> 15) & 0x1)
-#define PORT_P1_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P15) | (((val) & 0x1) << 15))
-/* Alternate Function at Port 1 Bit # (14) */
-#define PORT_P1_ALTSEL0_P14 (0x1 << 14)
-#define PORT_P1_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P1_ALTSEL0_P14_GET(val) ((((val) & PORT_P1_ALTSEL0_P14) >> 14) & 0x1)
-#define PORT_P1_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P14) | (((val) & 0x1) << 14))
-/* Alternate Function at Port 1 Bit # (13) */
-#define PORT_P1_ALTSEL0_P13 (0x1 << 13)
-#define PORT_P1_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P1_ALTSEL0_P13_GET(val) ((((val) & PORT_P1_ALTSEL0_P13) >> 13) & 0x1)
-#define PORT_P1_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P13) | (((val) & 0x1) << 13))
-/* Alternate Function at Port 1 Bit # (12) */
-#define PORT_P1_ALTSEL0_P12 (0x1 << 12)
-#define PORT_P1_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P1_ALTSEL0_P12_GET(val) ((((val) & PORT_P1_ALTSEL0_P12) >> 12) & 0x1)
-#define PORT_P1_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P12) | (((val) & 0x1) << 12))
-/* Alternate Function at Port 1 Bit # (11) */
-#define PORT_P1_ALTSEL0_P11 (0x1 << 11)
-#define PORT_P1_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P1_ALTSEL0_P11_GET(val) ((((val) & PORT_P1_ALTSEL0_P11) >> 11) & 0x1)
-#define PORT_P1_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P11) | (((val) & 0x1) << 11))
-/* Alternate Function at Port 1 Bit # (10) */
-#define PORT_P1_ALTSEL0_P10 (0x1 << 10)
-#define PORT_P1_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P1_ALTSEL0_P10_GET(val) ((((val) & PORT_P1_ALTSEL0_P10) >> 10) & 0x1)
-#define PORT_P1_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P10) | (((val) & 0x1) << 10))
-/* Alternate Function at Port 1 Bit # (9) */
-#define PORT_P1_ALTSEL0_P9 (0x1 << 9)
-#define PORT_P1_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P1_ALTSEL0_P9_GET(val) ((((val) & PORT_P1_ALTSEL0_P9) >> 9) & 0x1)
-#define PORT_P1_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P9) | (((val) & 0x1) << 9))
-/* Alternate Function at Port 1 Bit # (8) */
-#define PORT_P1_ALTSEL0_P8 (0x1 << 8)
-#define PORT_P1_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P1_ALTSEL0_P8_GET(val) ((((val) & PORT_P1_ALTSEL0_P8) >> 8) & 0x1)
-#define PORT_P1_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P8) | (((val) & 0x1) << 8))
-/* Alternate Function at Port 1 Bit # (7) */
-#define PORT_P1_ALTSEL0_P7 (0x1 << 7)
-#define PORT_P1_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P1_ALTSEL0_P7_GET(val) ((((val) & PORT_P1_ALTSEL0_P7) >> 7) & 0x1)
-#define PORT_P1_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P7) | (((val) & 0x1) << 7))
-/* Alternate Function at Port 1 Bit # (6) */
-#define PORT_P1_ALTSEL0_P6 (0x1 << 6)
-#define PORT_P1_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P1_ALTSEL0_P6_GET(val) ((((val) & PORT_P1_ALTSEL0_P6) >> 6) & 0x1)
-#define PORT_P1_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P6) | (((val) & 0x1) << 6))
-/* Alternate Function at Port 1 Bit # (5) */
-#define PORT_P1_ALTSEL0_P5 (0x1 << 5)
-#define PORT_P1_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P1_ALTSEL0_P5_GET(val) ((((val) & PORT_P1_ALTSEL0_P5) >> 5) & 0x1)
-#define PORT_P1_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P5) | (((val) & 0x1) << 5))
-/* Alternate Function at Port 1 Bit # (4) */
-#define PORT_P1_ALTSEL0_P4 (0x1 << 4)
-#define PORT_P1_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P1_ALTSEL0_P4_GET(val) ((((val) & PORT_P1_ALTSEL0_P4) >> 4) & 0x1)
-#define PORT_P1_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P4) | (((val) & 0x1) << 4))
-/* Alternate Function at Port 1 Bit # (3) */
-#define PORT_P1_ALTSEL0_P3 (0x1 << 3)
-#define PORT_P1_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P1_ALTSEL0_P3_GET(val) ((((val) & PORT_P1_ALTSEL0_P3) >> 3) & 0x1)
-#define PORT_P1_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P3) | (((val) & 0x1) << 3))
-/* Alternate Function at Port 1 Bit # (2) */
-#define PORT_P1_ALTSEL0_P2 (0x1 << 2)
-#define PORT_P1_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P1_ALTSEL0_P2_GET(val) ((((val) & PORT_P1_ALTSEL0_P2) >> 2) & 0x1)
-#define PORT_P1_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P2) | (((val) & 0x1) << 2))
-/* Alternate Function at Port 1 Bit # (1) */
-#define PORT_P1_ALTSEL0_P1 (0x1 << 1)
-#define PORT_P1_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P1_ALTSEL0_P1_GET(val) ((((val) & PORT_P1_ALTSEL0_P1) >> 1) & 0x1)
-#define PORT_P1_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P1) | (((val) & 0x1) << 1))
-/* Alternate Function at Port 1 Bit # (0) */
-#define PORT_P1_ALTSEL0_P0 (0x1)
-#define PORT_P1_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P1_ALTSEL0_P0_GET(val) ((((val) & PORT_P1_ALTSEL0_P0) >> 0) & 0x1)
-#define PORT_P1_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 1 Pull Up Device Enable Register
- ******************************************************************************/
-
-/* Pull Up Device Enable at Port 1 Bit # (19) */
-#define PORT_P1_PUEN_P19 (0x1 << 19)
-#define PORT_P1_PUEN_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P1_PUEN_P19_GET(val) ((((val) & PORT_P1_PUEN_P19) >> 19) & 0x1)
-#define PORT_P1_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P19) | (((val) & 0x1) << 19))
-/* Pull Up Device Enable at Port 1 Bit # (18) */
-#define PORT_P1_PUEN_P18 (0x1 << 18)
-#define PORT_P1_PUEN_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P1_PUEN_P18_GET(val) ((((val) & PORT_P1_PUEN_P18) >> 18) & 0x1)
-#define PORT_P1_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P18) | (((val) & 0x1) << 18))
-/* Pull Up Device Enable at Port 1 Bit # (17) */
-#define PORT_P1_PUEN_P17 (0x1 << 17)
-#define PORT_P1_PUEN_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P1_PUEN_P17_GET(val) ((((val) & PORT_P1_PUEN_P17) >> 17) & 0x1)
-#define PORT_P1_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P17) | (((val) & 0x1) << 17))
-/* Pull Up Device Enable at Port 1 Bit # (16) */
-#define PORT_P1_PUEN_P16 (0x1 << 16)
-#define PORT_P1_PUEN_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P1_PUEN_P16_GET(val) ((((val) & PORT_P1_PUEN_P16) >> 16) & 0x1)
-#define PORT_P1_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P16) | (((val) & 0x1) << 16))
-/* Pull Up Device Enable at Port 1 Bit # (15) */
-#define PORT_P1_PUEN_P15 (0x1 << 15)
-#define PORT_P1_PUEN_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P1_PUEN_P15_GET(val) ((((val) & PORT_P1_PUEN_P15) >> 15) & 0x1)
-#define PORT_P1_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P15) | (((val) & 0x1) << 15))
-/* Pull Up Device Enable at Port 1 Bit # (14) */
-#define PORT_P1_PUEN_P14 (0x1 << 14)
-#define PORT_P1_PUEN_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P1_PUEN_P14_GET(val) ((((val) & PORT_P1_PUEN_P14) >> 14) & 0x1)
-#define PORT_P1_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P14) | (((val) & 0x1) << 14))
-/* Pull Up Device Enable at Port 1 Bit # (13) */
-#define PORT_P1_PUEN_P13 (0x1 << 13)
-#define PORT_P1_PUEN_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P1_PUEN_P13_GET(val) ((((val) & PORT_P1_PUEN_P13) >> 13) & 0x1)
-#define PORT_P1_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P13) | (((val) & 0x1) << 13))
-/* Pull Up Device Enable at Port 1 Bit # (12) */
-#define PORT_P1_PUEN_P12 (0x1 << 12)
-#define PORT_P1_PUEN_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P1_PUEN_P12_GET(val) ((((val) & PORT_P1_PUEN_P12) >> 12) & 0x1)
-#define PORT_P1_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P12) | (((val) & 0x1) << 12))
-/* Pull Up Device Enable at Port 1 Bit # (11) */
-#define PORT_P1_PUEN_P11 (0x1 << 11)
-#define PORT_P1_PUEN_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P1_PUEN_P11_GET(val) ((((val) & PORT_P1_PUEN_P11) >> 11) & 0x1)
-#define PORT_P1_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P11) | (((val) & 0x1) << 11))
-/* Pull Up Device Enable at Port 1 Bit # (10) */
-#define PORT_P1_PUEN_P10 (0x1 << 10)
-#define PORT_P1_PUEN_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P1_PUEN_P10_GET(val) ((((val) & PORT_P1_PUEN_P10) >> 10) & 0x1)
-#define PORT_P1_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P10) | (((val) & 0x1) << 10))
-/* Pull Up Device Enable at Port 1 Bit # (9) */
-#define PORT_P1_PUEN_P9 (0x1 << 9)
-#define PORT_P1_PUEN_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P1_PUEN_P9_GET(val) ((((val) & PORT_P1_PUEN_P9) >> 9) & 0x1)
-#define PORT_P1_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P9) | (((val) & 0x1) << 9))
-/* Pull Up Device Enable at Port 1 Bit # (8) */
-#define PORT_P1_PUEN_P8 (0x1 << 8)
-#define PORT_P1_PUEN_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P1_PUEN_P8_GET(val) ((((val) & PORT_P1_PUEN_P8) >> 8) & 0x1)
-#define PORT_P1_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P8) | (((val) & 0x1) << 8))
-/* Pull Up Device Enable at Port 1 Bit # (7) */
-#define PORT_P1_PUEN_P7 (0x1 << 7)
-#define PORT_P1_PUEN_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P1_PUEN_P7_GET(val) ((((val) & PORT_P1_PUEN_P7) >> 7) & 0x1)
-#define PORT_P1_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P7) | (((val) & 0x1) << 7))
-/* Pull Up Device Enable at Port 1 Bit # (6) */
-#define PORT_P1_PUEN_P6 (0x1 << 6)
-#define PORT_P1_PUEN_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P1_PUEN_P6_GET(val) ((((val) & PORT_P1_PUEN_P6) >> 6) & 0x1)
-#define PORT_P1_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P6) | (((val) & 0x1) << 6))
-/* Pull Up Device Enable at Port 1 Bit # (5) */
-#define PORT_P1_PUEN_P5 (0x1 << 5)
-#define PORT_P1_PUEN_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P1_PUEN_P5_GET(val) ((((val) & PORT_P1_PUEN_P5) >> 5) & 0x1)
-#define PORT_P1_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P5) | (((val) & 0x1) << 5))
-/* Pull Up Device Enable at Port 1 Bit # (4) */
-#define PORT_P1_PUEN_P4 (0x1 << 4)
-#define PORT_P1_PUEN_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P1_PUEN_P4_GET(val) ((((val) & PORT_P1_PUEN_P4) >> 4) & 0x1)
-#define PORT_P1_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P4) | (((val) & 0x1) << 4))
-/* Pull Up Device Enable at Port 1 Bit # (3) */
-#define PORT_P1_PUEN_P3 (0x1 << 3)
-#define PORT_P1_PUEN_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P1_PUEN_P3_GET(val) ((((val) & PORT_P1_PUEN_P3) >> 3) & 0x1)
-#define PORT_P1_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P3) | (((val) & 0x1) << 3))
-/* Pull Up Device Enable at Port 1 Bit # (2) */
-#define PORT_P1_PUEN_P2 (0x1 << 2)
-#define PORT_P1_PUEN_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P1_PUEN_P2_GET(val) ((((val) & PORT_P1_PUEN_P2) >> 2) & 0x1)
-#define PORT_P1_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P2) | (((val) & 0x1) << 2))
-/* Pull Up Device Enable at Port 1 Bit # (1) */
-#define PORT_P1_PUEN_P1 (0x1 << 1)
-#define PORT_P1_PUEN_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P1_PUEN_P1_GET(val) ((((val) & PORT_P1_PUEN_P1) >> 1) & 0x1)
-#define PORT_P1_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P1) | (((val) & 0x1) << 1))
-/* Pull Up Device Enable at Port 1 Bit # (0) */
-#define PORT_P1_PUEN_P0 (0x1)
-#define PORT_P1_PUEN_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P1_PUEN_P0_GET(val) ((((val) & PORT_P1_PUEN_P0) >> 0) & 0x1)
-#define PORT_P1_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * External Interrupt Control Register 0
- ******************************************************************************/
-
-/* Type of Level or Edge Detection of EXINT15 (19) */
-#define PORT_P1_EXINTCR0_EXINT15 (0x1 << 19)
-#define PORT_P1_EXINTCR0_EXINT15_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P1_EXINTCR0_EXINT15_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT15) >> 19) & 0x1)
-#define PORT_P1_EXINTCR0_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT15) | (((val) & 0x1) << 19))
-/* Type of Level or Edge Detection of EXINT11 (18) */
-#define PORT_P1_EXINTCR0_EXINT11 (0x1 << 18)
-#define PORT_P1_EXINTCR0_EXINT11_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P1_EXINTCR0_EXINT11_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT11) >> 18) & 0x1)
-#define PORT_P1_EXINTCR0_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT11) | (((val) & 0x1) << 18))
-/* Type of Level or Edge Detection of EXINT12 (17) */
-#define PORT_P1_EXINTCR0_EXINT12 (0x1 << 17)
-#define PORT_P1_EXINTCR0_EXINT12_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P1_EXINTCR0_EXINT12_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT12) >> 17) & 0x1)
-#define PORT_P1_EXINTCR0_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT12) | (((val) & 0x1) << 17))
-/* Type of Level or Edge Detection of EXINT13 (16) */
-#define PORT_P1_EXINTCR0_EXINT13 (0x1 << 16)
-#define PORT_P1_EXINTCR0_EXINT13_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P1_EXINTCR0_EXINT13_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT13) >> 16) & 0x1)
-#define PORT_P1_EXINTCR0_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT13) | (((val) & 0x1) << 16))
-/* Type of Level or Edge Detection of EXINT14 (15) */
-#define PORT_P1_EXINTCR0_EXINT14 (0x1 << 15)
-#define PORT_P1_EXINTCR0_EXINT14_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P1_EXINTCR0_EXINT14_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT14) >> 15) & 0x1)
-#define PORT_P1_EXINTCR0_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT14) | (((val) & 0x1) << 15))
-
-/*******************************************************************************
- * External Interrupt Control Register 1
- ******************************************************************************/
-
-/* Type of Level or Edge Detection of EXINT15 (19) */
-#define PORT_P1_EXINTCR1_EXINT15 (0x1 << 19)
-#define PORT_P1_EXINTCR1_EXINT15_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P1_EXINTCR1_EXINT15_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT15) >> 19) & 0x1)
-#define PORT_P1_EXINTCR1_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT15) | (((val) & 0x1) << 19))
-/* Type of Level or Edge Detection of EXINT11 (18) */
-#define PORT_P1_EXINTCR1_EXINT11 (0x1 << 18)
-#define PORT_P1_EXINTCR1_EXINT11_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P1_EXINTCR1_EXINT11_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT11) >> 18) & 0x1)
-#define PORT_P1_EXINTCR1_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT11) | (((val) & 0x1) << 18))
-/* Type of Level or Edge Detection of EXINT12 (17) */
-#define PORT_P1_EXINTCR1_EXINT12 (0x1 << 17)
-#define PORT_P1_EXINTCR1_EXINT12_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P1_EXINTCR1_EXINT12_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT12) >> 17) & 0x1)
-#define PORT_P1_EXINTCR1_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT12) | (((val) & 0x1) << 17))
-/* Type of Level or Edge Detection of EXINT13 (16) */
-#define PORT_P1_EXINTCR1_EXINT13 (0x1 << 16)
-#define PORT_P1_EXINTCR1_EXINT13_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P1_EXINTCR1_EXINT13_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT13) >> 16) & 0x1)
-#define PORT_P1_EXINTCR1_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT13) | (((val) & 0x1) << 16))
-/* Type of Level or Edge Detection of EXINT14 (15) */
-#define PORT_P1_EXINTCR1_EXINT14 (0x1 << 15)
-#define PORT_P1_EXINTCR1_EXINT14_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P1_EXINTCR1_EXINT14_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT14) >> 15) & 0x1)
-#define PORT_P1_EXINTCR1_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT14) | (((val) & 0x1) << 15))
-
-/*******************************************************************************
- * P1_IRNEN Register
- ******************************************************************************/
-
-/* EXINT15 Interrupt Request Enable (19) */
-#define PORT_P1_IRNEN_EXINT15 (0x1 << 19)
-#define PORT_P1_IRNEN_EXINT15_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P1_IRNEN_EXINT15_GET(val) ((((val) & PORT_P1_IRNEN_EXINT15) >> 19) & 0x1)
-#define PORT_P1_IRNEN_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT15) | (((val) & 0x1) << 19))
-/* EXINT11 Interrupt Request Enable (18) */
-#define PORT_P1_IRNEN_EXINT11 (0x1 << 18)
-#define PORT_P1_IRNEN_EXINT11_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P1_IRNEN_EXINT11_GET(val) ((((val) & PORT_P1_IRNEN_EXINT11) >> 18) & 0x1)
-#define PORT_P1_IRNEN_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT11) | (((val) & 0x1) << 18))
-/* EXINT12 Interrupt Request Enable (17) */
-#define PORT_P1_IRNEN_EXINT12 (0x1 << 17)
-#define PORT_P1_IRNEN_EXINT12_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P1_IRNEN_EXINT12_GET(val) ((((val) & PORT_P1_IRNEN_EXINT12) >> 17) & 0x1)
-#define PORT_P1_IRNEN_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT12) | (((val) & 0x1) << 17))
-/* EXINT13 Interrupt Request Enable (16) */
-#define PORT_P1_IRNEN_EXINT13 (0x1 << 16)
-#define PORT_P1_IRNEN_EXINT13_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P1_IRNEN_EXINT13_GET(val) ((((val) & PORT_P1_IRNEN_EXINT13) >> 16) & 0x1)
-#define PORT_P1_IRNEN_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT13) | (((val) & 0x1) << 16))
-/* EXINT14 Interrupt Request Enable (15) */
-#define PORT_P1_IRNEN_EXINT14 (0x1 << 15)
-#define PORT_P1_IRNEN_EXINT14_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P1_IRNEN_EXINT14_GET(val) ((((val) & PORT_P1_IRNEN_EXINT14) >> 15) & 0x1)
-#define PORT_P1_IRNEN_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT14) | (((val) & 0x1) << 15))
-
-/*******************************************************************************
- * P1_IRNICR Register
- ******************************************************************************/
-
-/* EXINT15 Interrupt Request (19) */
-#define PORT_P1_IRNICR_EXINT15 (0x1 << 19)
-#define PORT_P1_IRNICR_EXINT15_GET(val) ((((val) & PORT_P1_IRNICR_EXINT15) >> 19) & 0x1)
-/* EXINT11 Interrupt Request (18) */
-#define PORT_P1_IRNICR_EXINT11 (0x1 << 18)
-#define PORT_P1_IRNICR_EXINT11_GET(val) ((((val) & PORT_P1_IRNICR_EXINT11) >> 18) & 0x1)
-/* EXINT12 Interrupt Request (17) */
-#define PORT_P1_IRNICR_EXINT12 (0x1 << 17)
-#define PORT_P1_IRNICR_EXINT12_GET(val) ((((val) & PORT_P1_IRNICR_EXINT12) >> 17) & 0x1)
-/* EXINT13 Interrupt Request (16) */
-#define PORT_P1_IRNICR_EXINT13 (0x1 << 16)
-#define PORT_P1_IRNICR_EXINT13_GET(val) ((((val) & PORT_P1_IRNICR_EXINT13) >> 16) & 0x1)
-/* EXINT14 Interrupt Request (15) */
-#define PORT_P1_IRNICR_EXINT14 (0x1 << 15)
-#define PORT_P1_IRNICR_EXINT14_GET(val) ((((val) & PORT_P1_IRNICR_EXINT14) >> 15) & 0x1)
-
-/*******************************************************************************
- * P1_IRNCR Register
- ******************************************************************************/
-
-/* EXINT15 Interrupt Request (19) */
-#define PORT_P1_IRNCR_EXINT15 (0x1 << 19)
-#define PORT_P1_IRNCR_EXINT15_GET(val) ((((val) & PORT_P1_IRNCR_EXINT15) >> 19) & 0x1)
-/* EXINT11 Interrupt Request (18) */
-#define PORT_P1_IRNCR_EXINT11 (0x1 << 18)
-#define PORT_P1_IRNCR_EXINT11_GET(val) ((((val) & PORT_P1_IRNCR_EXINT11) >> 18) & 0x1)
-/* EXINT12 Interrupt Request (17) */
-#define PORT_P1_IRNCR_EXINT12 (0x1 << 17)
-#define PORT_P1_IRNCR_EXINT12_GET(val) ((((val) & PORT_P1_IRNCR_EXINT12) >> 17) & 0x1)
-/* EXINT13 Interrupt Request (16) */
-#define PORT_P1_IRNCR_EXINT13 (0x1 << 16)
-#define PORT_P1_IRNCR_EXINT13_GET(val) ((((val) & PORT_P1_IRNCR_EXINT13) >> 16) & 0x1)
-/* EXINT14 Interrupt Request (15) */
-#define PORT_P1_IRNCR_EXINT14 (0x1 << 15)
-#define PORT_P1_IRNCR_EXINT14_GET(val) ((((val) & PORT_P1_IRNCR_EXINT14) >> 15) & 0x1)
-
-/*******************************************************************************
- * P1 External Event Detection Configuration Register
- ******************************************************************************/
-
-/* EXINT15 configured for Edge or Level Detection (19) */
-#define PORT_P1_IRNCFG_EXINT15 (0x1 << 19)
-#define PORT_P1_IRNCFG_EXINT15_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P1_IRNCFG_EXINT15_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT15) >> 19) & 0x1)
-#define PORT_P1_IRNCFG_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT15) | (((val) & 0x1) << 19))
-/* EXINT11 configured for Edge or Level Detection (18) */
-#define PORT_P1_IRNCFG_EXINT11 (0x1 << 18)
-#define PORT_P1_IRNCFG_EXINT11_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P1_IRNCFG_EXINT11_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT11) >> 18) & 0x1)
-#define PORT_P1_IRNCFG_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT11) | (((val) & 0x1) << 18))
-/* EXINT12 configured for Edge or Level Detection (17) */
-#define PORT_P1_IRNCFG_EXINT12 (0x1 << 17)
-#define PORT_P1_IRNCFG_EXINT12_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P1_IRNCFG_EXINT12_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT12) >> 17) & 0x1)
-#define PORT_P1_IRNCFG_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT12) | (((val) & 0x1) << 17))
-/* EXINT13 configured for Edge or Level Detection (16) */
-#define PORT_P1_IRNCFG_EXINT13 (0x1 << 16)
-#define PORT_P1_IRNCFG_EXINT13_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P1_IRNCFG_EXINT13_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT13) >> 16) & 0x1)
-#define PORT_P1_IRNCFG_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT13) | (((val) & 0x1) << 16))
-/* EXINT14 configured for Edge or Level Detection (15) */
-#define PORT_P1_IRNCFG_EXINT14 (0x1 << 15)
-#define PORT_P1_IRNCFG_EXINT14_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P1_IRNCFG_EXINT14_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT14) >> 15) & 0x1)
-#define PORT_P1_IRNCFG_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT14) | (((val) & 0x1) << 15))
-
-/*******************************************************************************
- * P1_IRNENSET Register
- ******************************************************************************/
-
-/* Set Interrupt Node Enable Flag EXINT15 (19) */
-#define PORT_P1_IRNENSET_EXINT15 (0x1 << 19)
-#define PORT_P1_IRNENSET_EXINT15_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P1_IRNENSET_EXINT15_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT15) | (val) & 1) << 19)
-/* Set Interrupt Node Enable Flag EXINT11 (18) */
-#define PORT_P1_IRNENSET_EXINT11 (0x1 << 18)
-#define PORT_P1_IRNENSET_EXINT11_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P1_IRNENSET_EXINT11_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT11) | (val) & 1) << 18)
-/* Set Interrupt Node Enable Flag EXINT12 (17) */
-#define PORT_P1_IRNENSET_EXINT12 (0x1 << 17)
-#define PORT_P1_IRNENSET_EXINT12_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P1_IRNENSET_EXINT12_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT12) | (val) & 1) << 17)
-/* Set Interrupt Node Enable Flag EXINT13 (16) */
-#define PORT_P1_IRNENSET_EXINT13 (0x1 << 16)
-#define PORT_P1_IRNENSET_EXINT13_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P1_IRNENSET_EXINT13_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT13) | (val) & 1) << 16)
-/* Set Interrupt Node Enable Flag EXINT14 (15) */
-#define PORT_P1_IRNENSET_EXINT14 (0x1 << 15)
-#define PORT_P1_IRNENSET_EXINT14_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P1_IRNENSET_EXINT14_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT14) | (val) & 1) << 15)
-
-/*******************************************************************************
- * P1_IRNENCLR Register
- ******************************************************************************/
-
-/* Clear Interrupt Node Enable Flag EXINT15 (19) */
-#define PORT_P1_IRNENCLR_EXINT15 (0x1 << 19)
-#define PORT_P1_IRNENCLR_EXINT15_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P1_IRNENCLR_EXINT15_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT15) | (val) & 1) << 19)
-/* Clear Interrupt Node Enable Flag EXINT11 (18) */
-#define PORT_P1_IRNENCLR_EXINT11 (0x1 << 18)
-#define PORT_P1_IRNENCLR_EXINT11_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P1_IRNENCLR_EXINT11_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT11) | (val) & 1) << 18)
-/* Clear Interrupt Node Enable Flag EXINT12 (17) */
-#define PORT_P1_IRNENCLR_EXINT12 (0x1 << 17)
-#define PORT_P1_IRNENCLR_EXINT12_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P1_IRNENCLR_EXINT12_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT12) | (val) & 1) << 17)
-/* Clear Interrupt Node Enable Flag EXINT13 (16) */
-#define PORT_P1_IRNENCLR_EXINT13 (0x1 << 16)
-#define PORT_P1_IRNENCLR_EXINT13_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P1_IRNENCLR_EXINT13_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT13) | (val) & 1) << 16)
-/* Clear Interrupt Node Enable Flag EXINT14 (15) */
-#define PORT_P1_IRNENCLR_EXINT14 (0x1 << 15)
-#define PORT_P1_IRNENCLR_EXINT14_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P1_IRNENCLR_EXINT14_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT14) | (val) & 1) << 15)
-
-/*******************************************************************************
- * Port 2 Data Output Register
- ******************************************************************************/
-
-/* Port 2 Pin # Output Value (19) */
-#define PORT_P2_OUT_P19 (0x1 << 19)
-#define PORT_P2_OUT_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P2_OUT_P19_GET(val) ((((val) & PORT_P2_OUT_P19) >> 19) & 0x1)
-#define PORT_P2_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P19) | (((val) & 0x1) << 19))
-/* Port 2 Pin # Output Value (18) */
-#define PORT_P2_OUT_P18 (0x1 << 18)
-#define PORT_P2_OUT_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P2_OUT_P18_GET(val) ((((val) & PORT_P2_OUT_P18) >> 18) & 0x1)
-#define PORT_P2_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P18) | (((val) & 0x1) << 18))
-/* Port 2 Pin # Output Value (17) */
-#define PORT_P2_OUT_P17 (0x1 << 17)
-#define PORT_P2_OUT_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P2_OUT_P17_GET(val) ((((val) & PORT_P2_OUT_P17) >> 17) & 0x1)
-#define PORT_P2_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P17) | (((val) & 0x1) << 17))
-/* Port 2 Pin # Output Value (16) */
-#define PORT_P2_OUT_P16 (0x1 << 16)
-#define PORT_P2_OUT_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P2_OUT_P16_GET(val) ((((val) & PORT_P2_OUT_P16) >> 16) & 0x1)
-#define PORT_P2_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P16) | (((val) & 0x1) << 16))
-/* Port 2 Pin # Output Value (15) */
-#define PORT_P2_OUT_P15 (0x1 << 15)
-#define PORT_P2_OUT_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P2_OUT_P15_GET(val) ((((val) & PORT_P2_OUT_P15) >> 15) & 0x1)
-#define PORT_P2_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P15) | (((val) & 0x1) << 15))
-/* Port 2 Pin # Output Value (14) */
-#define PORT_P2_OUT_P14 (0x1 << 14)
-#define PORT_P2_OUT_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P2_OUT_P14_GET(val) ((((val) & PORT_P2_OUT_P14) >> 14) & 0x1)
-#define PORT_P2_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P14) | (((val) & 0x1) << 14))
-/* Port 2 Pin # Output Value (13) */
-#define PORT_P2_OUT_P13 (0x1 << 13)
-#define PORT_P2_OUT_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P2_OUT_P13_GET(val) ((((val) & PORT_P2_OUT_P13) >> 13) & 0x1)
-#define PORT_P2_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P13) | (((val) & 0x1) << 13))
-/* Port 2 Pin # Output Value (12) */
-#define PORT_P2_OUT_P12 (0x1 << 12)
-#define PORT_P2_OUT_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P2_OUT_P12_GET(val) ((((val) & PORT_P2_OUT_P12) >> 12) & 0x1)
-#define PORT_P2_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P12) | (((val) & 0x1) << 12))
-/* Port 2 Pin # Output Value (11) */
-#define PORT_P2_OUT_P11 (0x1 << 11)
-#define PORT_P2_OUT_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P2_OUT_P11_GET(val) ((((val) & PORT_P2_OUT_P11) >> 11) & 0x1)
-#define PORT_P2_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P11) | (((val) & 0x1) << 11))
-/* Port 2 Pin # Output Value (10) */
-#define PORT_P2_OUT_P10 (0x1 << 10)
-#define PORT_P2_OUT_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P2_OUT_P10_GET(val) ((((val) & PORT_P2_OUT_P10) >> 10) & 0x1)
-#define PORT_P2_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P10) | (((val) & 0x1) << 10))
-/* Port 2 Pin # Output Value (9) */
-#define PORT_P2_OUT_P9 (0x1 << 9)
-#define PORT_P2_OUT_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P2_OUT_P9_GET(val) ((((val) & PORT_P2_OUT_P9) >> 9) & 0x1)
-#define PORT_P2_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P9) | (((val) & 0x1) << 9))
-/* Port 2 Pin # Output Value (8) */
-#define PORT_P2_OUT_P8 (0x1 << 8)
-#define PORT_P2_OUT_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P2_OUT_P8_GET(val) ((((val) & PORT_P2_OUT_P8) >> 8) & 0x1)
-#define PORT_P2_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P8) | (((val) & 0x1) << 8))
-/* Port 2 Pin # Output Value (7) */
-#define PORT_P2_OUT_P7 (0x1 << 7)
-#define PORT_P2_OUT_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P2_OUT_P7_GET(val) ((((val) & PORT_P2_OUT_P7) >> 7) & 0x1)
-#define PORT_P2_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P7) | (((val) & 0x1) << 7))
-/* Port 2 Pin # Output Value (6) */
-#define PORT_P2_OUT_P6 (0x1 << 6)
-#define PORT_P2_OUT_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P2_OUT_P6_GET(val) ((((val) & PORT_P2_OUT_P6) >> 6) & 0x1)
-#define PORT_P2_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P6) | (((val) & 0x1) << 6))
-/* Port 2 Pin # Output Value (5) */
-#define PORT_P2_OUT_P5 (0x1 << 5)
-#define PORT_P2_OUT_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P2_OUT_P5_GET(val) ((((val) & PORT_P2_OUT_P5) >> 5) & 0x1)
-#define PORT_P2_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P5) | (((val) & 0x1) << 5))
-/* Port 2 Pin # Output Value (4) */
-#define PORT_P2_OUT_P4 (0x1 << 4)
-#define PORT_P2_OUT_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P2_OUT_P4_GET(val) ((((val) & PORT_P2_OUT_P4) >> 4) & 0x1)
-#define PORT_P2_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P4) | (((val) & 0x1) << 4))
-/* Port 2 Pin # Output Value (3) */
-#define PORT_P2_OUT_P3 (0x1 << 3)
-#define PORT_P2_OUT_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P2_OUT_P3_GET(val) ((((val) & PORT_P2_OUT_P3) >> 3) & 0x1)
-#define PORT_P2_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P3) | (((val) & 0x1) << 3))
-/* Port 2 Pin # Output Value (2) */
-#define PORT_P2_OUT_P2 (0x1 << 2)
-#define PORT_P2_OUT_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P2_OUT_P2_GET(val) ((((val) & PORT_P2_OUT_P2) >> 2) & 0x1)
-#define PORT_P2_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P2) | (((val) & 0x1) << 2))
-/* Port 2 Pin # Output Value (1) */
-#define PORT_P2_OUT_P1 (0x1 << 1)
-#define PORT_P2_OUT_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P2_OUT_P1_GET(val) ((((val) & PORT_P2_OUT_P1) >> 1) & 0x1)
-#define PORT_P2_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P1) | (((val) & 0x1) << 1))
-/* Port 2 Pin # Output Value (0) */
-#define PORT_P2_OUT_P0 (0x1)
-#define PORT_P2_OUT_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P2_OUT_P0_GET(val) ((((val) & PORT_P2_OUT_P0) >> 0) & 0x1)
-#define PORT_P2_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 2 Data Input Register
- ******************************************************************************/
-
-/* Port 2 Pin # Latched Input Value (19) */
-#define PORT_P2_IN_P19 (0x1 << 19)
-#define PORT_P2_IN_P19_GET(val) ((((val) & PORT_P2_IN_P19) >> 19) & 0x1)
-/* Port 2 Pin # Latched Input Value (18) */
-#define PORT_P2_IN_P18 (0x1 << 18)
-#define PORT_P2_IN_P18_GET(val) ((((val) & PORT_P2_IN_P18) >> 18) & 0x1)
-/* Port 2 Pin # Latched Input Value (17) */
-#define PORT_P2_IN_P17 (0x1 << 17)
-#define PORT_P2_IN_P17_GET(val) ((((val) & PORT_P2_IN_P17) >> 17) & 0x1)
-/* Port 2 Pin # Latched Input Value (16) */
-#define PORT_P2_IN_P16 (0x1 << 16)
-#define PORT_P2_IN_P16_GET(val) ((((val) & PORT_P2_IN_P16) >> 16) & 0x1)
-/* Port 2 Pin # Latched Input Value (15) */
-#define PORT_P2_IN_P15 (0x1 << 15)
-#define PORT_P2_IN_P15_GET(val) ((((val) & PORT_P2_IN_P15) >> 15) & 0x1)
-/* Port 2 Pin # Latched Input Value (14) */
-#define PORT_P2_IN_P14 (0x1 << 14)
-#define PORT_P2_IN_P14_GET(val) ((((val) & PORT_P2_IN_P14) >> 14) & 0x1)
-/* Port 2 Pin # Latched Input Value (13) */
-#define PORT_P2_IN_P13 (0x1 << 13)
-#define PORT_P2_IN_P13_GET(val) ((((val) & PORT_P2_IN_P13) >> 13) & 0x1)
-/* Port 2 Pin # Latched Input Value (12) */
-#define PORT_P2_IN_P12 (0x1 << 12)
-#define PORT_P2_IN_P12_GET(val) ((((val) & PORT_P2_IN_P12) >> 12) & 0x1)
-/* Port 2 Pin # Latched Input Value (11) */
-#define PORT_P2_IN_P11 (0x1 << 11)
-#define PORT_P2_IN_P11_GET(val) ((((val) & PORT_P2_IN_P11) >> 11) & 0x1)
-/* Port 2 Pin # Latched Input Value (10) */
-#define PORT_P2_IN_P10 (0x1 << 10)
-#define PORT_P2_IN_P10_GET(val) ((((val) & PORT_P2_IN_P10) >> 10) & 0x1)
-/* Port 2 Pin # Latched Input Value (9) */
-#define PORT_P2_IN_P9 (0x1 << 9)
-#define PORT_P2_IN_P9_GET(val) ((((val) & PORT_P2_IN_P9) >> 9) & 0x1)
-/* Port 2 Pin # Latched Input Value (8) */
-#define PORT_P2_IN_P8 (0x1 << 8)
-#define PORT_P2_IN_P8_GET(val) ((((val) & PORT_P2_IN_P8) >> 8) & 0x1)
-/* Port 2 Pin # Latched Input Value (7) */
-#define PORT_P2_IN_P7 (0x1 << 7)
-#define PORT_P2_IN_P7_GET(val) ((((val) & PORT_P2_IN_P7) >> 7) & 0x1)
-/* Port 2 Pin # Latched Input Value (6) */
-#define PORT_P2_IN_P6 (0x1 << 6)
-#define PORT_P2_IN_P6_GET(val) ((((val) & PORT_P2_IN_P6) >> 6) & 0x1)
-/* Port 2 Pin # Latched Input Value (5) */
-#define PORT_P2_IN_P5 (0x1 << 5)
-#define PORT_P2_IN_P5_GET(val) ((((val) & PORT_P2_IN_P5) >> 5) & 0x1)
-/* Port 2 Pin # Latched Input Value (4) */
-#define PORT_P2_IN_P4 (0x1 << 4)
-#define PORT_P2_IN_P4_GET(val) ((((val) & PORT_P2_IN_P4) >> 4) & 0x1)
-/* Port 2 Pin # Latched Input Value (3) */
-#define PORT_P2_IN_P3 (0x1 << 3)
-#define PORT_P2_IN_P3_GET(val) ((((val) & PORT_P2_IN_P3) >> 3) & 0x1)
-/* Port 2 Pin # Latched Input Value (2) */
-#define PORT_P2_IN_P2 (0x1 << 2)
-#define PORT_P2_IN_P2_GET(val) ((((val) & PORT_P2_IN_P2) >> 2) & 0x1)
-/* Port 2 Pin # Latched Input Value (1) */
-#define PORT_P2_IN_P1 (0x1 << 1)
-#define PORT_P2_IN_P1_GET(val) ((((val) & PORT_P2_IN_P1) >> 1) & 0x1)
-/* Port 2 Pin # Latched Input Value (0) */
-#define PORT_P2_IN_P0 (0x1)
-#define PORT_P2_IN_P0_GET(val) ((((val) & PORT_P2_IN_P0) >> 0) & 0x1)
-
-/*******************************************************************************
- * Port 2 Direction Register
- ******************************************************************************/
-
-/* Port 2 Pin #Direction Control (19) */
-#define PORT_P2_DIR_P19 (0x1 << 19)
-#define PORT_P2_DIR_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P2_DIR_P19_GET(val) ((((val) & PORT_P2_DIR_P19) >> 19) & 0x1)
-#define PORT_P2_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P19) | (((val) & 0x1) << 19))
-/* Port 2 Pin #Direction Control (18) */
-#define PORT_P2_DIR_P18 (0x1 << 18)
-#define PORT_P2_DIR_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P2_DIR_P18_GET(val) ((((val) & PORT_P2_DIR_P18) >> 18) & 0x1)
-#define PORT_P2_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P18) | (((val) & 0x1) << 18))
-/* Port 2 Pin #Direction Control (17) */
-#define PORT_P2_DIR_P17 (0x1 << 17)
-#define PORT_P2_DIR_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P2_DIR_P17_GET(val) ((((val) & PORT_P2_DIR_P17) >> 17) & 0x1)
-#define PORT_P2_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P17) | (((val) & 0x1) << 17))
-/* Port 2 Pin #Direction Control (16) */
-#define PORT_P2_DIR_P16 (0x1 << 16)
-#define PORT_P2_DIR_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P2_DIR_P16_GET(val) ((((val) & PORT_P2_DIR_P16) >> 16) & 0x1)
-#define PORT_P2_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P16) | (((val) & 0x1) << 16))
-/* Port 2 Pin #Direction Control (15) */
-#define PORT_P2_DIR_P15 (0x1 << 15)
-#define PORT_P2_DIR_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P2_DIR_P15_GET(val) ((((val) & PORT_P2_DIR_P15) >> 15) & 0x1)
-#define PORT_P2_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P15) | (((val) & 0x1) << 15))
-/* Port 2 Pin #Direction Control (14) */
-#define PORT_P2_DIR_P14 (0x1 << 14)
-#define PORT_P2_DIR_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P2_DIR_P14_GET(val) ((((val) & PORT_P2_DIR_P14) >> 14) & 0x1)
-#define PORT_P2_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P14) | (((val) & 0x1) << 14))
-/* Port 2 Pin #Direction Control (13) */
-#define PORT_P2_DIR_P13 (0x1 << 13)
-#define PORT_P2_DIR_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P2_DIR_P13_GET(val) ((((val) & PORT_P2_DIR_P13) >> 13) & 0x1)
-#define PORT_P2_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P13) | (((val) & 0x1) << 13))
-/* Port 2 Pin #Direction Control (12) */
-#define PORT_P2_DIR_P12 (0x1 << 12)
-#define PORT_P2_DIR_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P2_DIR_P12_GET(val) ((((val) & PORT_P2_DIR_P12) >> 12) & 0x1)
-#define PORT_P2_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P12) | (((val) & 0x1) << 12))
-/* Port 2 Pin #Direction Control (11) */
-#define PORT_P2_DIR_P11 (0x1 << 11)
-#define PORT_P2_DIR_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P2_DIR_P11_GET(val) ((((val) & PORT_P2_DIR_P11) >> 11) & 0x1)
-#define PORT_P2_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P11) | (((val) & 0x1) << 11))
-/* Port 2 Pin #Direction Control (10) */
-#define PORT_P2_DIR_P10 (0x1 << 10)
-#define PORT_P2_DIR_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P2_DIR_P10_GET(val) ((((val) & PORT_P2_DIR_P10) >> 10) & 0x1)
-#define PORT_P2_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P10) | (((val) & 0x1) << 10))
-/* Port 2 Pin #Direction Control (9) */
-#define PORT_P2_DIR_P9 (0x1 << 9)
-#define PORT_P2_DIR_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P2_DIR_P9_GET(val) ((((val) & PORT_P2_DIR_P9) >> 9) & 0x1)
-#define PORT_P2_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P9) | (((val) & 0x1) << 9))
-/* Port 2 Pin #Direction Control (8) */
-#define PORT_P2_DIR_P8 (0x1 << 8)
-#define PORT_P2_DIR_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P2_DIR_P8_GET(val) ((((val) & PORT_P2_DIR_P8) >> 8) & 0x1)
-#define PORT_P2_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P8) | (((val) & 0x1) << 8))
-/* Port 2 Pin #Direction Control (7) */
-#define PORT_P2_DIR_P7 (0x1 << 7)
-#define PORT_P2_DIR_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P2_DIR_P7_GET(val) ((((val) & PORT_P2_DIR_P7) >> 7) & 0x1)
-#define PORT_P2_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P7) | (((val) & 0x1) << 7))
-/* Port 2 Pin #Direction Control (6) */
-#define PORT_P2_DIR_P6 (0x1 << 6)
-#define PORT_P2_DIR_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P2_DIR_P6_GET(val) ((((val) & PORT_P2_DIR_P6) >> 6) & 0x1)
-#define PORT_P2_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P6) | (((val) & 0x1) << 6))
-/* Port 2 Pin #Direction Control (5) */
-#define PORT_P2_DIR_P5 (0x1 << 5)
-#define PORT_P2_DIR_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P2_DIR_P5_GET(val) ((((val) & PORT_P2_DIR_P5) >> 5) & 0x1)
-#define PORT_P2_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P5) | (((val) & 0x1) << 5))
-/* Port 2 Pin #Direction Control (4) */
-#define PORT_P2_DIR_P4 (0x1 << 4)
-#define PORT_P2_DIR_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P2_DIR_P4_GET(val) ((((val) & PORT_P2_DIR_P4) >> 4) & 0x1)
-#define PORT_P2_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P4) | (((val) & 0x1) << 4))
-/* Port 2 Pin #Direction Control (3) */
-#define PORT_P2_DIR_P3 (0x1 << 3)
-#define PORT_P2_DIR_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P2_DIR_P3_GET(val) ((((val) & PORT_P2_DIR_P3) >> 3) & 0x1)
-#define PORT_P2_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P3) | (((val) & 0x1) << 3))
-/* Port 2 Pin #Direction Control (2) */
-#define PORT_P2_DIR_P2 (0x1 << 2)
-#define PORT_P2_DIR_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P2_DIR_P2_GET(val) ((((val) & PORT_P2_DIR_P2) >> 2) & 0x1)
-#define PORT_P2_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P2) | (((val) & 0x1) << 2))
-/* Port 2 Pin #Direction Control (1) */
-#define PORT_P2_DIR_P1 (0x1 << 1)
-#define PORT_P2_DIR_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P2_DIR_P1_GET(val) ((((val) & PORT_P2_DIR_P1) >> 1) & 0x1)
-#define PORT_P2_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P1) | (((val) & 0x1) << 1))
-/* Port 2 Pin #Direction Control (0) */
-#define PORT_P2_DIR_P0 (0x1)
-#define PORT_P2_DIR_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P2_DIR_P0_GET(val) ((((val) & PORT_P2_DIR_P0) >> 0) & 0x1)
-#define PORT_P2_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 2 Alternate Function Select Register 0
- ******************************************************************************/
-
-/* Alternate Function at Port 2 Bit # (19) */
-#define PORT_P2_ALTSEL0_P19 (0x1 << 19)
-#define PORT_P2_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P2_ALTSEL0_P19_GET(val) ((((val) & PORT_P2_ALTSEL0_P19) >> 19) & 0x1)
-#define PORT_P2_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P19) | (((val) & 0x1) << 19))
-/* Alternate Function at Port 2 Bit # (18) */
-#define PORT_P2_ALTSEL0_P18 (0x1 << 18)
-#define PORT_P2_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P2_ALTSEL0_P18_GET(val) ((((val) & PORT_P2_ALTSEL0_P18) >> 18) & 0x1)
-#define PORT_P2_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P18) | (((val) & 0x1) << 18))
-/* Alternate Function at Port 2 Bit # (17) */
-#define PORT_P2_ALTSEL0_P17 (0x1 << 17)
-#define PORT_P2_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P2_ALTSEL0_P17_GET(val) ((((val) & PORT_P2_ALTSEL0_P17) >> 17) & 0x1)
-#define PORT_P2_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P17) | (((val) & 0x1) << 17))
-/* Alternate Function at Port 2 Bit # (16) */
-#define PORT_P2_ALTSEL0_P16 (0x1 << 16)
-#define PORT_P2_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P2_ALTSEL0_P16_GET(val) ((((val) & PORT_P2_ALTSEL0_P16) >> 16) & 0x1)
-#define PORT_P2_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P16) | (((val) & 0x1) << 16))
-/* Alternate Function at Port 2 Bit # (15) */
-#define PORT_P2_ALTSEL0_P15 (0x1 << 15)
-#define PORT_P2_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P2_ALTSEL0_P15_GET(val) ((((val) & PORT_P2_ALTSEL0_P15) >> 15) & 0x1)
-#define PORT_P2_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P15) | (((val) & 0x1) << 15))
-/* Alternate Function at Port 2 Bit # (14) */
-#define PORT_P2_ALTSEL0_P14 (0x1 << 14)
-#define PORT_P2_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P2_ALTSEL0_P14_GET(val) ((((val) & PORT_P2_ALTSEL0_P14) >> 14) & 0x1)
-#define PORT_P2_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P14) | (((val) & 0x1) << 14))
-/* Alternate Function at Port 2 Bit # (13) */
-#define PORT_P2_ALTSEL0_P13 (0x1 << 13)
-#define PORT_P2_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P2_ALTSEL0_P13_GET(val) ((((val) & PORT_P2_ALTSEL0_P13) >> 13) & 0x1)
-#define PORT_P2_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P13) | (((val) & 0x1) << 13))
-/* Alternate Function at Port 2 Bit # (12) */
-#define PORT_P2_ALTSEL0_P12 (0x1 << 12)
-#define PORT_P2_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P2_ALTSEL0_P12_GET(val) ((((val) & PORT_P2_ALTSEL0_P12) >> 12) & 0x1)
-#define PORT_P2_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P12) | (((val) & 0x1) << 12))
-/* Alternate Function at Port 2 Bit # (11) */
-#define PORT_P2_ALTSEL0_P11 (0x1 << 11)
-#define PORT_P2_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P2_ALTSEL0_P11_GET(val) ((((val) & PORT_P2_ALTSEL0_P11) >> 11) & 0x1)
-#define PORT_P2_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P11) | (((val) & 0x1) << 11))
-/* Alternate Function at Port 2 Bit # (10) */
-#define PORT_P2_ALTSEL0_P10 (0x1 << 10)
-#define PORT_P2_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P2_ALTSEL0_P10_GET(val) ((((val) & PORT_P2_ALTSEL0_P10) >> 10) & 0x1)
-#define PORT_P2_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P10) | (((val) & 0x1) << 10))
-/* Alternate Function at Port 2 Bit # (9) */
-#define PORT_P2_ALTSEL0_P9 (0x1 << 9)
-#define PORT_P2_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P2_ALTSEL0_P9_GET(val) ((((val) & PORT_P2_ALTSEL0_P9) >> 9) & 0x1)
-#define PORT_P2_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P9) | (((val) & 0x1) << 9))
-/* Alternate Function at Port 2 Bit # (8) */
-#define PORT_P2_ALTSEL0_P8 (0x1 << 8)
-#define PORT_P2_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P2_ALTSEL0_P8_GET(val) ((((val) & PORT_P2_ALTSEL0_P8) >> 8) & 0x1)
-#define PORT_P2_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P8) | (((val) & 0x1) << 8))
-/* Alternate Function at Port 2 Bit # (7) */
-#define PORT_P2_ALTSEL0_P7 (0x1 << 7)
-#define PORT_P2_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P2_ALTSEL0_P7_GET(val) ((((val) & PORT_P2_ALTSEL0_P7) >> 7) & 0x1)
-#define PORT_P2_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P7) | (((val) & 0x1) << 7))
-/* Alternate Function at Port 2 Bit # (6) */
-#define PORT_P2_ALTSEL0_P6 (0x1 << 6)
-#define PORT_P2_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P2_ALTSEL0_P6_GET(val) ((((val) & PORT_P2_ALTSEL0_P6) >> 6) & 0x1)
-#define PORT_P2_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P6) | (((val) & 0x1) << 6))
-/* Alternate Function at Port 2 Bit # (5) */
-#define PORT_P2_ALTSEL0_P5 (0x1 << 5)
-#define PORT_P2_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P2_ALTSEL0_P5_GET(val) ((((val) & PORT_P2_ALTSEL0_P5) >> 5) & 0x1)
-#define PORT_P2_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P5) | (((val) & 0x1) << 5))
-/* Alternate Function at Port 2 Bit # (4) */
-#define PORT_P2_ALTSEL0_P4 (0x1 << 4)
-#define PORT_P2_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P2_ALTSEL0_P4_GET(val) ((((val) & PORT_P2_ALTSEL0_P4) >> 4) & 0x1)
-#define PORT_P2_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P4) | (((val) & 0x1) << 4))
-/* Alternate Function at Port 2 Bit # (3) */
-#define PORT_P2_ALTSEL0_P3 (0x1 << 3)
-#define PORT_P2_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P2_ALTSEL0_P3_GET(val) ((((val) & PORT_P2_ALTSEL0_P3) >> 3) & 0x1)
-#define PORT_P2_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P3) | (((val) & 0x1) << 3))
-/* Alternate Function at Port 2 Bit # (2) */
-#define PORT_P2_ALTSEL0_P2 (0x1 << 2)
-#define PORT_P2_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P2_ALTSEL0_P2_GET(val) ((((val) & PORT_P2_ALTSEL0_P2) >> 2) & 0x1)
-#define PORT_P2_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P2) | (((val) & 0x1) << 2))
-/* Alternate Function at Port 2 Bit # (1) */
-#define PORT_P2_ALTSEL0_P1 (0x1 << 1)
-#define PORT_P2_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P2_ALTSEL0_P1_GET(val) ((((val) & PORT_P2_ALTSEL0_P1) >> 1) & 0x1)
-#define PORT_P2_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P1) | (((val) & 0x1) << 1))
-/* Alternate Function at Port 2 Bit # (0) */
-#define PORT_P2_ALTSEL0_P0 (0x1)
-#define PORT_P2_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P2_ALTSEL0_P0_GET(val) ((((val) & PORT_P2_ALTSEL0_P0) >> 0) & 0x1)
-#define PORT_P2_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 2 Pull Up Device Enable Register
- ******************************************************************************/
-
-/* Pull Up Device Enable at Port 2 Bit # (19) */
-#define PORT_P2_PUEN_P19 (0x1 << 19)
-#define PORT_P2_PUEN_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P2_PUEN_P19_GET(val) ((((val) & PORT_P2_PUEN_P19) >> 19) & 0x1)
-#define PORT_P2_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P19) | (((val) & 0x1) << 19))
-/* Pull Up Device Enable at Port 2 Bit # (18) */
-#define PORT_P2_PUEN_P18 (0x1 << 18)
-#define PORT_P2_PUEN_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P2_PUEN_P18_GET(val) ((((val) & PORT_P2_PUEN_P18) >> 18) & 0x1)
-#define PORT_P2_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P18) | (((val) & 0x1) << 18))
-/* Pull Up Device Enable at Port 2 Bit # (17) */
-#define PORT_P2_PUEN_P17 (0x1 << 17)
-#define PORT_P2_PUEN_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P2_PUEN_P17_GET(val) ((((val) & PORT_P2_PUEN_P17) >> 17) & 0x1)
-#define PORT_P2_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P17) | (((val) & 0x1) << 17))
-/* Pull Up Device Enable at Port 2 Bit # (16) */
-#define PORT_P2_PUEN_P16 (0x1 << 16)
-#define PORT_P2_PUEN_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P2_PUEN_P16_GET(val) ((((val) & PORT_P2_PUEN_P16) >> 16) & 0x1)
-#define PORT_P2_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P16) | (((val) & 0x1) << 16))
-/* Pull Up Device Enable at Port 2 Bit # (15) */
-#define PORT_P2_PUEN_P15 (0x1 << 15)
-#define PORT_P2_PUEN_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P2_PUEN_P15_GET(val) ((((val) & PORT_P2_PUEN_P15) >> 15) & 0x1)
-#define PORT_P2_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P15) | (((val) & 0x1) << 15))
-/* Pull Up Device Enable at Port 2 Bit # (14) */
-#define PORT_P2_PUEN_P14 (0x1 << 14)
-#define PORT_P2_PUEN_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P2_PUEN_P14_GET(val) ((((val) & PORT_P2_PUEN_P14) >> 14) & 0x1)
-#define PORT_P2_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P14) | (((val) & 0x1) << 14))
-/* Pull Up Device Enable at Port 2 Bit # (13) */
-#define PORT_P2_PUEN_P13 (0x1 << 13)
-#define PORT_P2_PUEN_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P2_PUEN_P13_GET(val) ((((val) & PORT_P2_PUEN_P13) >> 13) & 0x1)
-#define PORT_P2_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P13) | (((val) & 0x1) << 13))
-/* Pull Up Device Enable at Port 2 Bit # (12) */
-#define PORT_P2_PUEN_P12 (0x1 << 12)
-#define PORT_P2_PUEN_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P2_PUEN_P12_GET(val) ((((val) & PORT_P2_PUEN_P12) >> 12) & 0x1)
-#define PORT_P2_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P12) | (((val) & 0x1) << 12))
-/* Pull Up Device Enable at Port 2 Bit # (11) */
-#define PORT_P2_PUEN_P11 (0x1 << 11)
-#define PORT_P2_PUEN_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P2_PUEN_P11_GET(val) ((((val) & PORT_P2_PUEN_P11) >> 11) & 0x1)
-#define PORT_P2_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P11) | (((val) & 0x1) << 11))
-/* Pull Up Device Enable at Port 2 Bit # (10) */
-#define PORT_P2_PUEN_P10 (0x1 << 10)
-#define PORT_P2_PUEN_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P2_PUEN_P10_GET(val) ((((val) & PORT_P2_PUEN_P10) >> 10) & 0x1)
-#define PORT_P2_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P10) | (((val) & 0x1) << 10))
-/* Pull Up Device Enable at Port 2 Bit # (9) */
-#define PORT_P2_PUEN_P9 (0x1 << 9)
-#define PORT_P2_PUEN_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P2_PUEN_P9_GET(val) ((((val) & PORT_P2_PUEN_P9) >> 9) & 0x1)
-#define PORT_P2_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P9) | (((val) & 0x1) << 9))
-/* Pull Up Device Enable at Port 2 Bit # (8) */
-#define PORT_P2_PUEN_P8 (0x1 << 8)
-#define PORT_P2_PUEN_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P2_PUEN_P8_GET(val) ((((val) & PORT_P2_PUEN_P8) >> 8) & 0x1)
-#define PORT_P2_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P8) | (((val) & 0x1) << 8))
-/* Pull Up Device Enable at Port 2 Bit # (7) */
-#define PORT_P2_PUEN_P7 (0x1 << 7)
-#define PORT_P2_PUEN_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P2_PUEN_P7_GET(val) ((((val) & PORT_P2_PUEN_P7) >> 7) & 0x1)
-#define PORT_P2_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P7) | (((val) & 0x1) << 7))
-/* Pull Up Device Enable at Port 2 Bit # (6) */
-#define PORT_P2_PUEN_P6 (0x1 << 6)
-#define PORT_P2_PUEN_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P2_PUEN_P6_GET(val) ((((val) & PORT_P2_PUEN_P6) >> 6) & 0x1)
-#define PORT_P2_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P6) | (((val) & 0x1) << 6))
-/* Pull Up Device Enable at Port 2 Bit # (5) */
-#define PORT_P2_PUEN_P5 (0x1 << 5)
-#define PORT_P2_PUEN_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P2_PUEN_P5_GET(val) ((((val) & PORT_P2_PUEN_P5) >> 5) & 0x1)
-#define PORT_P2_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P5) | (((val) & 0x1) << 5))
-/* Pull Up Device Enable at Port 2 Bit # (4) */
-#define PORT_P2_PUEN_P4 (0x1 << 4)
-#define PORT_P2_PUEN_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P2_PUEN_P4_GET(val) ((((val) & PORT_P2_PUEN_P4) >> 4) & 0x1)
-#define PORT_P2_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P4) | (((val) & 0x1) << 4))
-/* Pull Up Device Enable at Port 2 Bit # (3) */
-#define PORT_P2_PUEN_P3 (0x1 << 3)
-#define PORT_P2_PUEN_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P2_PUEN_P3_GET(val) ((((val) & PORT_P2_PUEN_P3) >> 3) & 0x1)
-#define PORT_P2_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P3) | (((val) & 0x1) << 3))
-/* Pull Up Device Enable at Port 2 Bit # (2) */
-#define PORT_P2_PUEN_P2 (0x1 << 2)
-#define PORT_P2_PUEN_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P2_PUEN_P2_GET(val) ((((val) & PORT_P2_PUEN_P2) >> 2) & 0x1)
-#define PORT_P2_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P2) | (((val) & 0x1) << 2))
-/* Pull Up Device Enable at Port 2 Bit # (1) */
-#define PORT_P2_PUEN_P1 (0x1 << 1)
-#define PORT_P2_PUEN_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P2_PUEN_P1_GET(val) ((((val) & PORT_P2_PUEN_P1) >> 1) & 0x1)
-#define PORT_P2_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P1) | (((val) & 0x1) << 1))
-/* Pull Up Device Enable at Port 2 Bit # (0) */
-#define PORT_P2_PUEN_P0 (0x1)
-#define PORT_P2_PUEN_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P2_PUEN_P0_GET(val) ((((val) & PORT_P2_PUEN_P0) >> 0) & 0x1)
-#define PORT_P2_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 3 Data Output Register
- ******************************************************************************/
-
-/* Port 3 Pin # Output Value (19) */
-#define PORT_P3_OUT_P19 (0x1 << 19)
-#define PORT_P3_OUT_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P3_OUT_P19_GET(val) ((((val) & PORT_P3_OUT_P19) >> 19) & 0x1)
-#define PORT_P3_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P19) | (((val) & 0x1) << 19))
-/* Port 3 Pin # Output Value (18) */
-#define PORT_P3_OUT_P18 (0x1 << 18)
-#define PORT_P3_OUT_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P3_OUT_P18_GET(val) ((((val) & PORT_P3_OUT_P18) >> 18) & 0x1)
-#define PORT_P3_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P18) | (((val) & 0x1) << 18))
-/* Port 3 Pin # Output Value (17) */
-#define PORT_P3_OUT_P17 (0x1 << 17)
-#define PORT_P3_OUT_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P3_OUT_P17_GET(val) ((((val) & PORT_P3_OUT_P17) >> 17) & 0x1)
-#define PORT_P3_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P17) | (((val) & 0x1) << 17))
-/* Port 3 Pin # Output Value (16) */
-#define PORT_P3_OUT_P16 (0x1 << 16)
-#define PORT_P3_OUT_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P3_OUT_P16_GET(val) ((((val) & PORT_P3_OUT_P16) >> 16) & 0x1)
-#define PORT_P3_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P16) | (((val) & 0x1) << 16))
-/* Port 3 Pin # Output Value (15) */
-#define PORT_P3_OUT_P15 (0x1 << 15)
-#define PORT_P3_OUT_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P3_OUT_P15_GET(val) ((((val) & PORT_P3_OUT_P15) >> 15) & 0x1)
-#define PORT_P3_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P15) | (((val) & 0x1) << 15))
-/* Port 3 Pin # Output Value (14) */
-#define PORT_P3_OUT_P14 (0x1 << 14)
-#define PORT_P3_OUT_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P3_OUT_P14_GET(val) ((((val) & PORT_P3_OUT_P14) >> 14) & 0x1)
-#define PORT_P3_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P14) | (((val) & 0x1) << 14))
-/* Port 3 Pin # Output Value (13) */
-#define PORT_P3_OUT_P13 (0x1 << 13)
-#define PORT_P3_OUT_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P3_OUT_P13_GET(val) ((((val) & PORT_P3_OUT_P13) >> 13) & 0x1)
-#define PORT_P3_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P13) | (((val) & 0x1) << 13))
-/* Port 3 Pin # Output Value (12) */
-#define PORT_P3_OUT_P12 (0x1 << 12)
-#define PORT_P3_OUT_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P3_OUT_P12_GET(val) ((((val) & PORT_P3_OUT_P12) >> 12) & 0x1)
-#define PORT_P3_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P12) | (((val) & 0x1) << 12))
-/* Port 3 Pin # Output Value (11) */
-#define PORT_P3_OUT_P11 (0x1 << 11)
-#define PORT_P3_OUT_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P3_OUT_P11_GET(val) ((((val) & PORT_P3_OUT_P11) >> 11) & 0x1)
-#define PORT_P3_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P11) | (((val) & 0x1) << 11))
-/* Port 3 Pin # Output Value (10) */
-#define PORT_P3_OUT_P10 (0x1 << 10)
-#define PORT_P3_OUT_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P3_OUT_P10_GET(val) ((((val) & PORT_P3_OUT_P10) >> 10) & 0x1)
-#define PORT_P3_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P10) | (((val) & 0x1) << 10))
-/* Port 3 Pin # Output Value (9) */
-#define PORT_P3_OUT_P9 (0x1 << 9)
-#define PORT_P3_OUT_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P3_OUT_P9_GET(val) ((((val) & PORT_P3_OUT_P9) >> 9) & 0x1)
-#define PORT_P3_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P9) | (((val) & 0x1) << 9))
-/* Port 3 Pin # Output Value (8) */
-#define PORT_P3_OUT_P8 (0x1 << 8)
-#define PORT_P3_OUT_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P3_OUT_P8_GET(val) ((((val) & PORT_P3_OUT_P8) >> 8) & 0x1)
-#define PORT_P3_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P8) | (((val) & 0x1) << 8))
-/* Port 3 Pin # Output Value (7) */
-#define PORT_P3_OUT_P7 (0x1 << 7)
-#define PORT_P3_OUT_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P3_OUT_P7_GET(val) ((((val) & PORT_P3_OUT_P7) >> 7) & 0x1)
-#define PORT_P3_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P7) | (((val) & 0x1) << 7))
-/* Port 3 Pin # Output Value (6) */
-#define PORT_P3_OUT_P6 (0x1 << 6)
-#define PORT_P3_OUT_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P3_OUT_P6_GET(val) ((((val) & PORT_P3_OUT_P6) >> 6) & 0x1)
-#define PORT_P3_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P6) | (((val) & 0x1) << 6))
-/* Port 3 Pin # Output Value (5) */
-#define PORT_P3_OUT_P5 (0x1 << 5)
-#define PORT_P3_OUT_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P3_OUT_P5_GET(val) ((((val) & PORT_P3_OUT_P5) >> 5) & 0x1)
-#define PORT_P3_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P5) | (((val) & 0x1) << 5))
-/* Port 3 Pin # Output Value (4) */
-#define PORT_P3_OUT_P4 (0x1 << 4)
-#define PORT_P3_OUT_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P3_OUT_P4_GET(val) ((((val) & PORT_P3_OUT_P4) >> 4) & 0x1)
-#define PORT_P3_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P4) | (((val) & 0x1) << 4))
-/* Port 3 Pin # Output Value (3) */
-#define PORT_P3_OUT_P3 (0x1 << 3)
-#define PORT_P3_OUT_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P3_OUT_P3_GET(val) ((((val) & PORT_P3_OUT_P3) >> 3) & 0x1)
-#define PORT_P3_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P3) | (((val) & 0x1) << 3))
-/* Port 3 Pin # Output Value (2) */
-#define PORT_P3_OUT_P2 (0x1 << 2)
-#define PORT_P3_OUT_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P3_OUT_P2_GET(val) ((((val) & PORT_P3_OUT_P2) >> 2) & 0x1)
-#define PORT_P3_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P2) | (((val) & 0x1) << 2))
-/* Port 3 Pin # Output Value (1) */
-#define PORT_P3_OUT_P1 (0x1 << 1)
-#define PORT_P3_OUT_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P3_OUT_P1_GET(val) ((((val) & PORT_P3_OUT_P1) >> 1) & 0x1)
-#define PORT_P3_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P1) | (((val) & 0x1) << 1))
-/* Port 3 Pin # Output Value (0) */
-#define PORT_P3_OUT_P0 (0x1)
-#define PORT_P3_OUT_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P3_OUT_P0_GET(val) ((((val) & PORT_P3_OUT_P0) >> 0) & 0x1)
-#define PORT_P3_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 3 Data Input Register
- ******************************************************************************/
-
-/* Port 3 Pin # Latched Input Value (19) */
-#define PORT_P3_IN_P19 (0x1 << 19)
-#define PORT_P3_IN_P19_GET(val) ((((val) & PORT_P3_IN_P19) >> 19) & 0x1)
-/* Port 3 Pin # Latched Input Value (18) */
-#define PORT_P3_IN_P18 (0x1 << 18)
-#define PORT_P3_IN_P18_GET(val) ((((val) & PORT_P3_IN_P18) >> 18) & 0x1)
-/* Port 3 Pin # Latched Input Value (17) */
-#define PORT_P3_IN_P17 (0x1 << 17)
-#define PORT_P3_IN_P17_GET(val) ((((val) & PORT_P3_IN_P17) >> 17) & 0x1)
-/* Port 3 Pin # Latched Input Value (16) */
-#define PORT_P3_IN_P16 (0x1 << 16)
-#define PORT_P3_IN_P16_GET(val) ((((val) & PORT_P3_IN_P16) >> 16) & 0x1)
-/* Port 3 Pin # Latched Input Value (15) */
-#define PORT_P3_IN_P15 (0x1 << 15)
-#define PORT_P3_IN_P15_GET(val) ((((val) & PORT_P3_IN_P15) >> 15) & 0x1)
-/* Port 3 Pin # Latched Input Value (14) */
-#define PORT_P3_IN_P14 (0x1 << 14)
-#define PORT_P3_IN_P14_GET(val) ((((val) & PORT_P3_IN_P14) >> 14) & 0x1)
-/* Port 3 Pin # Latched Input Value (13) */
-#define PORT_P3_IN_P13 (0x1 << 13)
-#define PORT_P3_IN_P13_GET(val) ((((val) & PORT_P3_IN_P13) >> 13) & 0x1)
-/* Port 3 Pin # Latched Input Value (12) */
-#define PORT_P3_IN_P12 (0x1 << 12)
-#define PORT_P3_IN_P12_GET(val) ((((val) & PORT_P3_IN_P12) >> 12) & 0x1)
-/* Port 3 Pin # Latched Input Value (11) */
-#define PORT_P3_IN_P11 (0x1 << 11)
-#define PORT_P3_IN_P11_GET(val) ((((val) & PORT_P3_IN_P11) >> 11) & 0x1)
-/* Port 3 Pin # Latched Input Value (10) */
-#define PORT_P3_IN_P10 (0x1 << 10)
-#define PORT_P3_IN_P10_GET(val) ((((val) & PORT_P3_IN_P10) >> 10) & 0x1)
-/* Port 3 Pin # Latched Input Value (9) */
-#define PORT_P3_IN_P9 (0x1 << 9)
-#define PORT_P3_IN_P9_GET(val) ((((val) & PORT_P3_IN_P9) >> 9) & 0x1)
-/* Port 3 Pin # Latched Input Value (8) */
-#define PORT_P3_IN_P8 (0x1 << 8)
-#define PORT_P3_IN_P8_GET(val) ((((val) & PORT_P3_IN_P8) >> 8) & 0x1)
-/* Port 3 Pin # Latched Input Value (7) */
-#define PORT_P3_IN_P7 (0x1 << 7)
-#define PORT_P3_IN_P7_GET(val) ((((val) & PORT_P3_IN_P7) >> 7) & 0x1)
-/* Port 3 Pin # Latched Input Value (6) */
-#define PORT_P3_IN_P6 (0x1 << 6)
-#define PORT_P3_IN_P6_GET(val) ((((val) & PORT_P3_IN_P6) >> 6) & 0x1)
-/* Port 3 Pin # Latched Input Value (5) */
-#define PORT_P3_IN_P5 (0x1 << 5)
-#define PORT_P3_IN_P5_GET(val) ((((val) & PORT_P3_IN_P5) >> 5) & 0x1)
-/* Port 3 Pin # Latched Input Value (4) */
-#define PORT_P3_IN_P4 (0x1 << 4)
-#define PORT_P3_IN_P4_GET(val) ((((val) & PORT_P3_IN_P4) >> 4) & 0x1)
-/* Port 3 Pin # Latched Input Value (3) */
-#define PORT_P3_IN_P3 (0x1 << 3)
-#define PORT_P3_IN_P3_GET(val) ((((val) & PORT_P3_IN_P3) >> 3) & 0x1)
-/* Port 3 Pin # Latched Input Value (2) */
-#define PORT_P3_IN_P2 (0x1 << 2)
-#define PORT_P3_IN_P2_GET(val) ((((val) & PORT_P3_IN_P2) >> 2) & 0x1)
-/* Port 3 Pin # Latched Input Value (1) */
-#define PORT_P3_IN_P1 (0x1 << 1)
-#define PORT_P3_IN_P1_GET(val) ((((val) & PORT_P3_IN_P1) >> 1) & 0x1)
-/* Port 3 Pin # Latched Input Value (0) */
-#define PORT_P3_IN_P0 (0x1)
-#define PORT_P3_IN_P0_GET(val) ((((val) & PORT_P3_IN_P0) >> 0) & 0x1)
-
-/*******************************************************************************
- * Port 3 Direction Register
- ******************************************************************************/
-
-/* Port 3 Pin #Direction Control (19) */
-#define PORT_P3_DIR_P19 (0x1 << 19)
-#define PORT_P3_DIR_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P3_DIR_P19_GET(val) ((((val) & PORT_P3_DIR_P19) >> 19) & 0x1)
-#define PORT_P3_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P19) | (((val) & 0x1) << 19))
-/* Port 3 Pin #Direction Control (18) */
-#define PORT_P3_DIR_P18 (0x1 << 18)
-#define PORT_P3_DIR_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P3_DIR_P18_GET(val) ((((val) & PORT_P3_DIR_P18) >> 18) & 0x1)
-#define PORT_P3_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P18) | (((val) & 0x1) << 18))
-/* Port 3 Pin #Direction Control (17) */
-#define PORT_P3_DIR_P17 (0x1 << 17)
-#define PORT_P3_DIR_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P3_DIR_P17_GET(val) ((((val) & PORT_P3_DIR_P17) >> 17) & 0x1)
-#define PORT_P3_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P17) | (((val) & 0x1) << 17))
-/* Port 3 Pin #Direction Control (16) */
-#define PORT_P3_DIR_P16 (0x1 << 16)
-#define PORT_P3_DIR_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P3_DIR_P16_GET(val) ((((val) & PORT_P3_DIR_P16) >> 16) & 0x1)
-#define PORT_P3_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P16) | (((val) & 0x1) << 16))
-/* Port 3 Pin #Direction Control (15) */
-#define PORT_P3_DIR_P15 (0x1 << 15)
-#define PORT_P3_DIR_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P3_DIR_P15_GET(val) ((((val) & PORT_P3_DIR_P15) >> 15) & 0x1)
-#define PORT_P3_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P15) | (((val) & 0x1) << 15))
-/* Port 3 Pin #Direction Control (14) */
-#define PORT_P3_DIR_P14 (0x1 << 14)
-#define PORT_P3_DIR_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P3_DIR_P14_GET(val) ((((val) & PORT_P3_DIR_P14) >> 14) & 0x1)
-#define PORT_P3_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P14) | (((val) & 0x1) << 14))
-/* Port 3 Pin #Direction Control (13) */
-#define PORT_P3_DIR_P13 (0x1 << 13)
-#define PORT_P3_DIR_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P3_DIR_P13_GET(val) ((((val) & PORT_P3_DIR_P13) >> 13) & 0x1)
-#define PORT_P3_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P13) | (((val) & 0x1) << 13))
-/* Port 3 Pin #Direction Control (12) */
-#define PORT_P3_DIR_P12 (0x1 << 12)
-#define PORT_P3_DIR_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P3_DIR_P12_GET(val) ((((val) & PORT_P3_DIR_P12) >> 12) & 0x1)
-#define PORT_P3_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P12) | (((val) & 0x1) << 12))
-/* Port 3 Pin #Direction Control (11) */
-#define PORT_P3_DIR_P11 (0x1 << 11)
-#define PORT_P3_DIR_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P3_DIR_P11_GET(val) ((((val) & PORT_P3_DIR_P11) >> 11) & 0x1)
-#define PORT_P3_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P11) | (((val) & 0x1) << 11))
-/* Port 3 Pin #Direction Control (10) */
-#define PORT_P3_DIR_P10 (0x1 << 10)
-#define PORT_P3_DIR_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P3_DIR_P10_GET(val) ((((val) & PORT_P3_DIR_P10) >> 10) & 0x1)
-#define PORT_P3_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P10) | (((val) & 0x1) << 10))
-/* Port 3 Pin #Direction Control (9) */
-#define PORT_P3_DIR_P9 (0x1 << 9)
-#define PORT_P3_DIR_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P3_DIR_P9_GET(val) ((((val) & PORT_P3_DIR_P9) >> 9) & 0x1)
-#define PORT_P3_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P9) | (((val) & 0x1) << 9))
-/* Port 3 Pin #Direction Control (8) */
-#define PORT_P3_DIR_P8 (0x1 << 8)
-#define PORT_P3_DIR_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P3_DIR_P8_GET(val) ((((val) & PORT_P3_DIR_P8) >> 8) & 0x1)
-#define PORT_P3_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P8) | (((val) & 0x1) << 8))
-/* Port 3 Pin #Direction Control (7) */
-#define PORT_P3_DIR_P7 (0x1 << 7)
-#define PORT_P3_DIR_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P3_DIR_P7_GET(val) ((((val) & PORT_P3_DIR_P7) >> 7) & 0x1)
-#define PORT_P3_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P7) | (((val) & 0x1) << 7))
-/* Port 3 Pin #Direction Control (6) */
-#define PORT_P3_DIR_P6 (0x1 << 6)
-#define PORT_P3_DIR_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P3_DIR_P6_GET(val) ((((val) & PORT_P3_DIR_P6) >> 6) & 0x1)
-#define PORT_P3_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P6) | (((val) & 0x1) << 6))
-/* Port 3 Pin #Direction Control (5) */
-#define PORT_P3_DIR_P5 (0x1 << 5)
-#define PORT_P3_DIR_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P3_DIR_P5_GET(val) ((((val) & PORT_P3_DIR_P5) >> 5) & 0x1)
-#define PORT_P3_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P5) | (((val) & 0x1) << 5))
-/* Port 3 Pin #Direction Control (4) */
-#define PORT_P3_DIR_P4 (0x1 << 4)
-#define PORT_P3_DIR_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P3_DIR_P4_GET(val) ((((val) & PORT_P3_DIR_P4) >> 4) & 0x1)
-#define PORT_P3_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P4) | (((val) & 0x1) << 4))
-/* Port 3 Pin #Direction Control (3) */
-#define PORT_P3_DIR_P3 (0x1 << 3)
-#define PORT_P3_DIR_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P3_DIR_P3_GET(val) ((((val) & PORT_P3_DIR_P3) >> 3) & 0x1)
-#define PORT_P3_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P3) | (((val) & 0x1) << 3))
-/* Port 3 Pin #Direction Control (2) */
-#define PORT_P3_DIR_P2 (0x1 << 2)
-#define PORT_P3_DIR_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P3_DIR_P2_GET(val) ((((val) & PORT_P3_DIR_P2) >> 2) & 0x1)
-#define PORT_P3_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P2) | (((val) & 0x1) << 2))
-/* Port 3 Pin #Direction Control (1) */
-#define PORT_P3_DIR_P1 (0x1 << 1)
-#define PORT_P3_DIR_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P3_DIR_P1_GET(val) ((((val) & PORT_P3_DIR_P1) >> 1) & 0x1)
-#define PORT_P3_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P1) | (((val) & 0x1) << 1))
-/* Port 3 Pin #Direction Control (0) */
-#define PORT_P3_DIR_P0 (0x1)
-#define PORT_P3_DIR_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P3_DIR_P0_GET(val) ((((val) & PORT_P3_DIR_P0) >> 0) & 0x1)
-#define PORT_P3_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 3 Alternate Function Select Register 0
- ******************************************************************************/
-
-/* Alternate Function at Port 3 Bit # (19) */
-#define PORT_P3_ALTSEL0_P19 (0x1 << 19)
-#define PORT_P3_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P3_ALTSEL0_P19_GET(val) ((((val) & PORT_P3_ALTSEL0_P19) >> 19) & 0x1)
-#define PORT_P3_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P19) | (((val) & 0x1) << 19))
-/* Alternate Function at Port 3 Bit # (18) */
-#define PORT_P3_ALTSEL0_P18 (0x1 << 18)
-#define PORT_P3_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P3_ALTSEL0_P18_GET(val) ((((val) & PORT_P3_ALTSEL0_P18) >> 18) & 0x1)
-#define PORT_P3_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P18) | (((val) & 0x1) << 18))
-/* Alternate Function at Port 3 Bit # (17) */
-#define PORT_P3_ALTSEL0_P17 (0x1 << 17)
-#define PORT_P3_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P3_ALTSEL0_P17_GET(val) ((((val) & PORT_P3_ALTSEL0_P17) >> 17) & 0x1)
-#define PORT_P3_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P17) | (((val) & 0x1) << 17))
-/* Alternate Function at Port 3 Bit # (16) */
-#define PORT_P3_ALTSEL0_P16 (0x1 << 16)
-#define PORT_P3_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P3_ALTSEL0_P16_GET(val) ((((val) & PORT_P3_ALTSEL0_P16) >> 16) & 0x1)
-#define PORT_P3_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P16) | (((val) & 0x1) << 16))
-/* Alternate Function at Port 3 Bit # (15) */
-#define PORT_P3_ALTSEL0_P15 (0x1 << 15)
-#define PORT_P3_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P3_ALTSEL0_P15_GET(val) ((((val) & PORT_P3_ALTSEL0_P15) >> 15) & 0x1)
-#define PORT_P3_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P15) | (((val) & 0x1) << 15))
-/* Alternate Function at Port 3 Bit # (14) */
-#define PORT_P3_ALTSEL0_P14 (0x1 << 14)
-#define PORT_P3_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P3_ALTSEL0_P14_GET(val) ((((val) & PORT_P3_ALTSEL0_P14) >> 14) & 0x1)
-#define PORT_P3_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P14) | (((val) & 0x1) << 14))
-/* Alternate Function at Port 3 Bit # (13) */
-#define PORT_P3_ALTSEL0_P13 (0x1 << 13)
-#define PORT_P3_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P3_ALTSEL0_P13_GET(val) ((((val) & PORT_P3_ALTSEL0_P13) >> 13) & 0x1)
-#define PORT_P3_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P13) | (((val) & 0x1) << 13))
-/* Alternate Function at Port 3 Bit # (12) */
-#define PORT_P3_ALTSEL0_P12 (0x1 << 12)
-#define PORT_P3_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P3_ALTSEL0_P12_GET(val) ((((val) & PORT_P3_ALTSEL0_P12) >> 12) & 0x1)
-#define PORT_P3_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P12) | (((val) & 0x1) << 12))
-/* Alternate Function at Port 3 Bit # (11) */
-#define PORT_P3_ALTSEL0_P11 (0x1 << 11)
-#define PORT_P3_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P3_ALTSEL0_P11_GET(val) ((((val) & PORT_P3_ALTSEL0_P11) >> 11) & 0x1)
-#define PORT_P3_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P11) | (((val) & 0x1) << 11))
-/* Alternate Function at Port 3 Bit # (10) */
-#define PORT_P3_ALTSEL0_P10 (0x1 << 10)
-#define PORT_P3_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P3_ALTSEL0_P10_GET(val) ((((val) & PORT_P3_ALTSEL0_P10) >> 10) & 0x1)
-#define PORT_P3_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P10) | (((val) & 0x1) << 10))
-/* Alternate Function at Port 3 Bit # (9) */
-#define PORT_P3_ALTSEL0_P9 (0x1 << 9)
-#define PORT_P3_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P3_ALTSEL0_P9_GET(val) ((((val) & PORT_P3_ALTSEL0_P9) >> 9) & 0x1)
-#define PORT_P3_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P9) | (((val) & 0x1) << 9))
-/* Alternate Function at Port 3 Bit # (8) */
-#define PORT_P3_ALTSEL0_P8 (0x1 << 8)
-#define PORT_P3_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P3_ALTSEL0_P8_GET(val) ((((val) & PORT_P3_ALTSEL0_P8) >> 8) & 0x1)
-#define PORT_P3_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P8) | (((val) & 0x1) << 8))
-/* Alternate Function at Port 3 Bit # (7) */
-#define PORT_P3_ALTSEL0_P7 (0x1 << 7)
-#define PORT_P3_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P3_ALTSEL0_P7_GET(val) ((((val) & PORT_P3_ALTSEL0_P7) >> 7) & 0x1)
-#define PORT_P3_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P7) | (((val) & 0x1) << 7))
-/* Alternate Function at Port 3 Bit # (6) */
-#define PORT_P3_ALTSEL0_P6 (0x1 << 6)
-#define PORT_P3_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P3_ALTSEL0_P6_GET(val) ((((val) & PORT_P3_ALTSEL0_P6) >> 6) & 0x1)
-#define PORT_P3_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P6) | (((val) & 0x1) << 6))
-/* Alternate Function at Port 3 Bit # (5) */
-#define PORT_P3_ALTSEL0_P5 (0x1 << 5)
-#define PORT_P3_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P3_ALTSEL0_P5_GET(val) ((((val) & PORT_P3_ALTSEL0_P5) >> 5) & 0x1)
-#define PORT_P3_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P5) | (((val) & 0x1) << 5))
-/* Alternate Function at Port 3 Bit # (4) */
-#define PORT_P3_ALTSEL0_P4 (0x1 << 4)
-#define PORT_P3_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P3_ALTSEL0_P4_GET(val) ((((val) & PORT_P3_ALTSEL0_P4) >> 4) & 0x1)
-#define PORT_P3_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P4) | (((val) & 0x1) << 4))
-/* Alternate Function at Port 3 Bit # (3) */
-#define PORT_P3_ALTSEL0_P3 (0x1 << 3)
-#define PORT_P3_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P3_ALTSEL0_P3_GET(val) ((((val) & PORT_P3_ALTSEL0_P3) >> 3) & 0x1)
-#define PORT_P3_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P3) | (((val) & 0x1) << 3))
-/* Alternate Function at Port 3 Bit # (2) */
-#define PORT_P3_ALTSEL0_P2 (0x1 << 2)
-#define PORT_P3_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P3_ALTSEL0_P2_GET(val) ((((val) & PORT_P3_ALTSEL0_P2) >> 2) & 0x1)
-#define PORT_P3_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P2) | (((val) & 0x1) << 2))
-/* Alternate Function at Port 3 Bit # (1) */
-#define PORT_P3_ALTSEL0_P1 (0x1 << 1)
-#define PORT_P3_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P3_ALTSEL0_P1_GET(val) ((((val) & PORT_P3_ALTSEL0_P1) >> 1) & 0x1)
-#define PORT_P3_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P1) | (((val) & 0x1) << 1))
-/* Alternate Function at Port 3 Bit # (0) */
-#define PORT_P3_ALTSEL0_P0 (0x1)
-#define PORT_P3_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P3_ALTSEL0_P0_GET(val) ((((val) & PORT_P3_ALTSEL0_P0) >> 0) & 0x1)
-#define PORT_P3_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 3 Pull Up Device Enable Register
- ******************************************************************************/
-
-/* Pull Up Device Enable at Port 3 Bit # (19) */
-#define PORT_P3_PUEN_P19 (0x1 << 19)
-#define PORT_P3_PUEN_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P3_PUEN_P19_GET(val) ((((val) & PORT_P3_PUEN_P19) >> 19) & 0x1)
-#define PORT_P3_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P19) | (((val) & 0x1) << 19))
-/* Pull Up Device Enable at Port 3 Bit # (18) */
-#define PORT_P3_PUEN_P18 (0x1 << 18)
-#define PORT_P3_PUEN_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P3_PUEN_P18_GET(val) ((((val) & PORT_P3_PUEN_P18) >> 18) & 0x1)
-#define PORT_P3_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P18) | (((val) & 0x1) << 18))
-/* Pull Up Device Enable at Port 3 Bit # (17) */
-#define PORT_P3_PUEN_P17 (0x1 << 17)
-#define PORT_P3_PUEN_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P3_PUEN_P17_GET(val) ((((val) & PORT_P3_PUEN_P17) >> 17) & 0x1)
-#define PORT_P3_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P17) | (((val) & 0x1) << 17))
-/* Pull Up Device Enable at Port 3 Bit # (16) */
-#define PORT_P3_PUEN_P16 (0x1 << 16)
-#define PORT_P3_PUEN_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P3_PUEN_P16_GET(val) ((((val) & PORT_P3_PUEN_P16) >> 16) & 0x1)
-#define PORT_P3_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P16) | (((val) & 0x1) << 16))
-/* Pull Up Device Enable at Port 3 Bit # (15) */
-#define PORT_P3_PUEN_P15 (0x1 << 15)
-#define PORT_P3_PUEN_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P3_PUEN_P15_GET(val) ((((val) & PORT_P3_PUEN_P15) >> 15) & 0x1)
-#define PORT_P3_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P15) | (((val) & 0x1) << 15))
-/* Pull Up Device Enable at Port 3 Bit # (14) */
-#define PORT_P3_PUEN_P14 (0x1 << 14)
-#define PORT_P3_PUEN_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P3_PUEN_P14_GET(val) ((((val) & PORT_P3_PUEN_P14) >> 14) & 0x1)
-#define PORT_P3_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P14) | (((val) & 0x1) << 14))
-/* Pull Up Device Enable at Port 3 Bit # (13) */
-#define PORT_P3_PUEN_P13 (0x1 << 13)
-#define PORT_P3_PUEN_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P3_PUEN_P13_GET(val) ((((val) & PORT_P3_PUEN_P13) >> 13) & 0x1)
-#define PORT_P3_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P13) | (((val) & 0x1) << 13))
-/* Pull Up Device Enable at Port 3 Bit # (12) */
-#define PORT_P3_PUEN_P12 (0x1 << 12)
-#define PORT_P3_PUEN_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P3_PUEN_P12_GET(val) ((((val) & PORT_P3_PUEN_P12) >> 12) & 0x1)
-#define PORT_P3_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P12) | (((val) & 0x1) << 12))
-/* Pull Up Device Enable at Port 3 Bit # (11) */
-#define PORT_P3_PUEN_P11 (0x1 << 11)
-#define PORT_P3_PUEN_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P3_PUEN_P11_GET(val) ((((val) & PORT_P3_PUEN_P11) >> 11) & 0x1)
-#define PORT_P3_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P11) | (((val) & 0x1) << 11))
-/* Pull Up Device Enable at Port 3 Bit # (10) */
-#define PORT_P3_PUEN_P10 (0x1 << 10)
-#define PORT_P3_PUEN_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P3_PUEN_P10_GET(val) ((((val) & PORT_P3_PUEN_P10) >> 10) & 0x1)
-#define PORT_P3_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P10) | (((val) & 0x1) << 10))
-/* Pull Up Device Enable at Port 3 Bit # (9) */
-#define PORT_P3_PUEN_P9 (0x1 << 9)
-#define PORT_P3_PUEN_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P3_PUEN_P9_GET(val) ((((val) & PORT_P3_PUEN_P9) >> 9) & 0x1)
-#define PORT_P3_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P9) | (((val) & 0x1) << 9))
-/* Pull Up Device Enable at Port 3 Bit # (8) */
-#define PORT_P3_PUEN_P8 (0x1 << 8)
-#define PORT_P3_PUEN_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P3_PUEN_P8_GET(val) ((((val) & PORT_P3_PUEN_P8) >> 8) & 0x1)
-#define PORT_P3_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P8) | (((val) & 0x1) << 8))
-/* Pull Up Device Enable at Port 3 Bit # (7) */
-#define PORT_P3_PUEN_P7 (0x1 << 7)
-#define PORT_P3_PUEN_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P3_PUEN_P7_GET(val) ((((val) & PORT_P3_PUEN_P7) >> 7) & 0x1)
-#define PORT_P3_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P7) | (((val) & 0x1) << 7))
-/* Pull Up Device Enable at Port 3 Bit # (6) */
-#define PORT_P3_PUEN_P6 (0x1 << 6)
-#define PORT_P3_PUEN_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P3_PUEN_P6_GET(val) ((((val) & PORT_P3_PUEN_P6) >> 6) & 0x1)
-#define PORT_P3_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P6) | (((val) & 0x1) << 6))
-/* Pull Up Device Enable at Port 3 Bit # (5) */
-#define PORT_P3_PUEN_P5 (0x1 << 5)
-#define PORT_P3_PUEN_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P3_PUEN_P5_GET(val) ((((val) & PORT_P3_PUEN_P5) >> 5) & 0x1)
-#define PORT_P3_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P5) | (((val) & 0x1) << 5))
-/* Pull Up Device Enable at Port 3 Bit # (4) */
-#define PORT_P3_PUEN_P4 (0x1 << 4)
-#define PORT_P3_PUEN_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P3_PUEN_P4_GET(val) ((((val) & PORT_P3_PUEN_P4) >> 4) & 0x1)
-#define PORT_P3_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P4) | (((val) & 0x1) << 4))
-/* Pull Up Device Enable at Port 3 Bit # (3) */
-#define PORT_P3_PUEN_P3 (0x1 << 3)
-#define PORT_P3_PUEN_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P3_PUEN_P3_GET(val) ((((val) & PORT_P3_PUEN_P3) >> 3) & 0x1)
-#define PORT_P3_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P3) | (((val) & 0x1) << 3))
-/* Pull Up Device Enable at Port 3 Bit # (2) */
-#define PORT_P3_PUEN_P2 (0x1 << 2)
-#define PORT_P3_PUEN_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P3_PUEN_P2_GET(val) ((((val) & PORT_P3_PUEN_P2) >> 2) & 0x1)
-#define PORT_P3_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P2) | (((val) & 0x1) << 2))
-/* Pull Up Device Enable at Port 3 Bit # (1) */
-#define PORT_P3_PUEN_P1 (0x1 << 1)
-#define PORT_P3_PUEN_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P3_PUEN_P1_GET(val) ((((val) & PORT_P3_PUEN_P1) >> 1) & 0x1)
-#define PORT_P3_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P1) | (((val) & 0x1) << 1))
-/* Pull Up Device Enable at Port 3 Bit # (0) */
-#define PORT_P3_PUEN_P0 (0x1)
-#define PORT_P3_PUEN_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P3_PUEN_P0_GET(val) ((((val) & PORT_P3_PUEN_P0) >> 0) & 0x1)
-#define PORT_P3_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 4 Data Output Register
- ******************************************************************************/
-
-/* Port 4 Pin # Output Value (23) */
-#define PORT_P4_OUT_P23 (0x1 << 23)
-#define PORT_P4_OUT_P23_VAL(val) (((val) & 0x1) << 23)
-#define PORT_P4_OUT_P23_GET(val) ((((val) & PORT_P4_OUT_P23) >> 23) & 0x1)
-#define PORT_P4_OUT_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P23) | (((val) & 0x1) << 23))
-/* Port 4 Pin # Output Value (22) */
-#define PORT_P4_OUT_P22 (0x1 << 22)
-#define PORT_P4_OUT_P22_VAL(val) (((val) & 0x1) << 22)
-#define PORT_P4_OUT_P22_GET(val) ((((val) & PORT_P4_OUT_P22) >> 22) & 0x1)
-#define PORT_P4_OUT_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P22) | (((val) & 0x1) << 22))
-/* Port 4 Pin # Output Value (21) */
-#define PORT_P4_OUT_P21 (0x1 << 21)
-#define PORT_P4_OUT_P21_VAL(val) (((val) & 0x1) << 21)
-#define PORT_P4_OUT_P21_GET(val) ((((val) & PORT_P4_OUT_P21) >> 21) & 0x1)
-#define PORT_P4_OUT_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P21) | (((val) & 0x1) << 21))
-/* Port 4 Pin # Output Value (20) */
-#define PORT_P4_OUT_P20 (0x1 << 20)
-#define PORT_P4_OUT_P20_VAL(val) (((val) & 0x1) << 20)
-#define PORT_P4_OUT_P20_GET(val) ((((val) & PORT_P4_OUT_P20) >> 20) & 0x1)
-#define PORT_P4_OUT_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P20) | (((val) & 0x1) << 20))
-/* Port 4 Pin # Output Value (19) */
-#define PORT_P4_OUT_P19 (0x1 << 19)
-#define PORT_P4_OUT_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P4_OUT_P19_GET(val) ((((val) & PORT_P4_OUT_P19) >> 19) & 0x1)
-#define PORT_P4_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P19) | (((val) & 0x1) << 19))
-/* Port 4 Pin # Output Value (18) */
-#define PORT_P4_OUT_P18 (0x1 << 18)
-#define PORT_P4_OUT_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P4_OUT_P18_GET(val) ((((val) & PORT_P4_OUT_P18) >> 18) & 0x1)
-#define PORT_P4_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P18) | (((val) & 0x1) << 18))
-/* Port 4 Pin # Output Value (17) */
-#define PORT_P4_OUT_P17 (0x1 << 17)
-#define PORT_P4_OUT_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P4_OUT_P17_GET(val) ((((val) & PORT_P4_OUT_P17) >> 17) & 0x1)
-#define PORT_P4_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P17) | (((val) & 0x1) << 17))
-/* Port 4 Pin # Output Value (16) */
-#define PORT_P4_OUT_P16 (0x1 << 16)
-#define PORT_P4_OUT_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P4_OUT_P16_GET(val) ((((val) & PORT_P4_OUT_P16) >> 16) & 0x1)
-#define PORT_P4_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P16) | (((val) & 0x1) << 16))
-/* Port 4 Pin # Output Value (15) */
-#define PORT_P4_OUT_P15 (0x1 << 15)
-#define PORT_P4_OUT_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P4_OUT_P15_GET(val) ((((val) & PORT_P4_OUT_P15) >> 15) & 0x1)
-#define PORT_P4_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P15) | (((val) & 0x1) << 15))
-/* Port 4 Pin # Output Value (14) */
-#define PORT_P4_OUT_P14 (0x1 << 14)
-#define PORT_P4_OUT_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P4_OUT_P14_GET(val) ((((val) & PORT_P4_OUT_P14) >> 14) & 0x1)
-#define PORT_P4_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P14) | (((val) & 0x1) << 14))
-/* Port 4 Pin # Output Value (13) */
-#define PORT_P4_OUT_P13 (0x1 << 13)
-#define PORT_P4_OUT_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P4_OUT_P13_GET(val) ((((val) & PORT_P4_OUT_P13) >> 13) & 0x1)
-#define PORT_P4_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P13) | (((val) & 0x1) << 13))
-/* Port 4 Pin # Output Value (12) */
-#define PORT_P4_OUT_P12 (0x1 << 12)
-#define PORT_P4_OUT_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P4_OUT_P12_GET(val) ((((val) & PORT_P4_OUT_P12) >> 12) & 0x1)
-#define PORT_P4_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P12) | (((val) & 0x1) << 12))
-/* Port 4 Pin # Output Value (11) */
-#define PORT_P4_OUT_P11 (0x1 << 11)
-#define PORT_P4_OUT_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P4_OUT_P11_GET(val) ((((val) & PORT_P4_OUT_P11) >> 11) & 0x1)
-#define PORT_P4_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P11) | (((val) & 0x1) << 11))
-/* Port 4 Pin # Output Value (10) */
-#define PORT_P4_OUT_P10 (0x1 << 10)
-#define PORT_P4_OUT_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P4_OUT_P10_GET(val) ((((val) & PORT_P4_OUT_P10) >> 10) & 0x1)
-#define PORT_P4_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P10) | (((val) & 0x1) << 10))
-/* Port 4 Pin # Output Value (9) */
-#define PORT_P4_OUT_P9 (0x1 << 9)
-#define PORT_P4_OUT_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P4_OUT_P9_GET(val) ((((val) & PORT_P4_OUT_P9) >> 9) & 0x1)
-#define PORT_P4_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P9) | (((val) & 0x1) << 9))
-/* Port 4 Pin # Output Value (8) */
-#define PORT_P4_OUT_P8 (0x1 << 8)
-#define PORT_P4_OUT_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P4_OUT_P8_GET(val) ((((val) & PORT_P4_OUT_P8) >> 8) & 0x1)
-#define PORT_P4_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P8) | (((val) & 0x1) << 8))
-/* Port 4 Pin # Output Value (7) */
-#define PORT_P4_OUT_P7 (0x1 << 7)
-#define PORT_P4_OUT_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P4_OUT_P7_GET(val) ((((val) & PORT_P4_OUT_P7) >> 7) & 0x1)
-#define PORT_P4_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P7) | (((val) & 0x1) << 7))
-/* Port 4 Pin # Output Value (6) */
-#define PORT_P4_OUT_P6 (0x1 << 6)
-#define PORT_P4_OUT_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P4_OUT_P6_GET(val) ((((val) & PORT_P4_OUT_P6) >> 6) & 0x1)
-#define PORT_P4_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P6) | (((val) & 0x1) << 6))
-/* Port 4 Pin # Output Value (5) */
-#define PORT_P4_OUT_P5 (0x1 << 5)
-#define PORT_P4_OUT_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P4_OUT_P5_GET(val) ((((val) & PORT_P4_OUT_P5) >> 5) & 0x1)
-#define PORT_P4_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P5) | (((val) & 0x1) << 5))
-/* Port 4 Pin # Output Value (4) */
-#define PORT_P4_OUT_P4 (0x1 << 4)
-#define PORT_P4_OUT_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P4_OUT_P4_GET(val) ((((val) & PORT_P4_OUT_P4) >> 4) & 0x1)
-#define PORT_P4_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P4) | (((val) & 0x1) << 4))
-/* Port 4 Pin # Output Value (3) */
-#define PORT_P4_OUT_P3 (0x1 << 3)
-#define PORT_P4_OUT_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P4_OUT_P3_GET(val) ((((val) & PORT_P4_OUT_P3) >> 3) & 0x1)
-#define PORT_P4_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P3) | (((val) & 0x1) << 3))
-/* Port 4 Pin # Output Value (2) */
-#define PORT_P4_OUT_P2 (0x1 << 2)
-#define PORT_P4_OUT_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P4_OUT_P2_GET(val) ((((val) & PORT_P4_OUT_P2) >> 2) & 0x1)
-#define PORT_P4_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P2) | (((val) & 0x1) << 2))
-/* Port 4 Pin # Output Value (1) */
-#define PORT_P4_OUT_P1 (0x1 << 1)
-#define PORT_P4_OUT_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P4_OUT_P1_GET(val) ((((val) & PORT_P4_OUT_P1) >> 1) & 0x1)
-#define PORT_P4_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P1) | (((val) & 0x1) << 1))
-/* Port 4 Pin # Output Value (0) */
-#define PORT_P4_OUT_P0 (0x1)
-#define PORT_P4_OUT_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P4_OUT_P0_GET(val) ((((val) & PORT_P4_OUT_P0) >> 0) & 0x1)
-#define PORT_P4_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 4 Data Input Register
- ******************************************************************************/
-
-/* Port 4 Pin # Latched Input Value (23) */
-#define PORT_P4_IN_P23 (0x1 << 23)
-#define PORT_P4_IN_P23_GET(val) ((((val) & PORT_P4_IN_P23) >> 23) & 0x1)
-/* Port 4 Pin # Latched Input Value (22) */
-#define PORT_P4_IN_P22 (0x1 << 22)
-#define PORT_P4_IN_P22_GET(val) ((((val) & PORT_P4_IN_P22) >> 22) & 0x1)
-/* Port 4 Pin # Latched Input Value (21) */
-#define PORT_P4_IN_P21 (0x1 << 21)
-#define PORT_P4_IN_P21_GET(val) ((((val) & PORT_P4_IN_P21) >> 21) & 0x1)
-/* Port 4 Pin # Latched Input Value (20) */
-#define PORT_P4_IN_P20 (0x1 << 20)
-#define PORT_P4_IN_P20_GET(val) ((((val) & PORT_P4_IN_P20) >> 20) & 0x1)
-/* Port 4 Pin # Latched Input Value (19) */
-#define PORT_P4_IN_P19 (0x1 << 19)
-#define PORT_P4_IN_P19_GET(val) ((((val) & PORT_P4_IN_P19) >> 19) & 0x1)
-/* Port 4 Pin # Latched Input Value (18) */
-#define PORT_P4_IN_P18 (0x1 << 18)
-#define PORT_P4_IN_P18_GET(val) ((((val) & PORT_P4_IN_P18) >> 18) & 0x1)
-/* Port 4 Pin # Latched Input Value (17) */
-#define PORT_P4_IN_P17 (0x1 << 17)
-#define PORT_P4_IN_P17_GET(val) ((((val) & PORT_P4_IN_P17) >> 17) & 0x1)
-/* Port 4 Pin # Latched Input Value (16) */
-#define PORT_P4_IN_P16 (0x1 << 16)
-#define PORT_P4_IN_P16_GET(val) ((((val) & PORT_P4_IN_P16) >> 16) & 0x1)
-/* Port 4 Pin # Latched Input Value (15) */
-#define PORT_P4_IN_P15 (0x1 << 15)
-#define PORT_P4_IN_P15_GET(val) ((((val) & PORT_P4_IN_P15) >> 15) & 0x1)
-/* Port 4 Pin # Latched Input Value (14) */
-#define PORT_P4_IN_P14 (0x1 << 14)
-#define PORT_P4_IN_P14_GET(val) ((((val) & PORT_P4_IN_P14) >> 14) & 0x1)
-/* Port 4 Pin # Latched Input Value (13) */
-#define PORT_P4_IN_P13 (0x1 << 13)
-#define PORT_P4_IN_P13_GET(val) ((((val) & PORT_P4_IN_P13) >> 13) & 0x1)
-/* Port 4 Pin # Latched Input Value (12) */
-#define PORT_P4_IN_P12 (0x1 << 12)
-#define PORT_P4_IN_P12_GET(val) ((((val) & PORT_P4_IN_P12) >> 12) & 0x1)
-/* Port 4 Pin # Latched Input Value (11) */
-#define PORT_P4_IN_P11 (0x1 << 11)
-#define PORT_P4_IN_P11_GET(val) ((((val) & PORT_P4_IN_P11) >> 11) & 0x1)
-/* Port 4 Pin # Latched Input Value (10) */
-#define PORT_P4_IN_P10 (0x1 << 10)
-#define PORT_P4_IN_P10_GET(val) ((((val) & PORT_P4_IN_P10) >> 10) & 0x1)
-/* Port 4 Pin # Latched Input Value (9) */
-#define PORT_P4_IN_P9 (0x1 << 9)
-#define PORT_P4_IN_P9_GET(val) ((((val) & PORT_P4_IN_P9) >> 9) & 0x1)
-/* Port 4 Pin # Latched Input Value (8) */
-#define PORT_P4_IN_P8 (0x1 << 8)
-#define PORT_P4_IN_P8_GET(val) ((((val) & PORT_P4_IN_P8) >> 8) & 0x1)
-/* Port 4 Pin # Latched Input Value (7) */
-#define PORT_P4_IN_P7 (0x1 << 7)
-#define PORT_P4_IN_P7_GET(val) ((((val) & PORT_P4_IN_P7) >> 7) & 0x1)
-/* Port 4 Pin # Latched Input Value (6) */
-#define PORT_P4_IN_P6 (0x1 << 6)
-#define PORT_P4_IN_P6_GET(val) ((((val) & PORT_P4_IN_P6) >> 6) & 0x1)
-/* Port 4 Pin # Latched Input Value (5) */
-#define PORT_P4_IN_P5 (0x1 << 5)
-#define PORT_P4_IN_P5_GET(val) ((((val) & PORT_P4_IN_P5) >> 5) & 0x1)
-/* Port 4 Pin # Latched Input Value (4) */
-#define PORT_P4_IN_P4 (0x1 << 4)
-#define PORT_P4_IN_P4_GET(val) ((((val) & PORT_P4_IN_P4) >> 4) & 0x1)
-/* Port 4 Pin # Latched Input Value (3) */
-#define PORT_P4_IN_P3 (0x1 << 3)
-#define PORT_P4_IN_P3_GET(val) ((((val) & PORT_P4_IN_P3) >> 3) & 0x1)
-/* Port 4 Pin # Latched Input Value (2) */
-#define PORT_P4_IN_P2 (0x1 << 2)
-#define PORT_P4_IN_P2_GET(val) ((((val) & PORT_P4_IN_P2) >> 2) & 0x1)
-/* Port 4 Pin # Latched Input Value (1) */
-#define PORT_P4_IN_P1 (0x1 << 1)
-#define PORT_P4_IN_P1_GET(val) ((((val) & PORT_P4_IN_P1) >> 1) & 0x1)
-/* Port 4 Pin # Latched Input Value (0) */
-#define PORT_P4_IN_P0 (0x1)
-#define PORT_P4_IN_P0_GET(val) ((((val) & PORT_P4_IN_P0) >> 0) & 0x1)
-
-/*******************************************************************************
- * Port 4 Direction Register
- ******************************************************************************/
-
-/* Port 4 Pin #Direction Control (23) */
-#define PORT_P4_DIR_P23 (0x1 << 23)
-#define PORT_P4_DIR_P23_VAL(val) (((val) & 0x1) << 23)
-#define PORT_P4_DIR_P23_GET(val) ((((val) & PORT_P4_DIR_P23) >> 23) & 0x1)
-#define PORT_P4_DIR_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P23) | (((val) & 0x1) << 23))
-/* Port 4 Pin #Direction Control (22) */
-#define PORT_P4_DIR_P22 (0x1 << 22)
-#define PORT_P4_DIR_P22_VAL(val) (((val) & 0x1) << 22)
-#define PORT_P4_DIR_P22_GET(val) ((((val) & PORT_P4_DIR_P22) >> 22) & 0x1)
-#define PORT_P4_DIR_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P22) | (((val) & 0x1) << 22))
-/* Port 4 Pin #Direction Control (21) */
-#define PORT_P4_DIR_P21 (0x1 << 21)
-#define PORT_P4_DIR_P21_VAL(val) (((val) & 0x1) << 21)
-#define PORT_P4_DIR_P21_GET(val) ((((val) & PORT_P4_DIR_P21) >> 21) & 0x1)
-#define PORT_P4_DIR_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P21) | (((val) & 0x1) << 21))
-/* Port 4 Pin #Direction Control (20) */
-#define PORT_P4_DIR_P20 (0x1 << 20)
-#define PORT_P4_DIR_P20_VAL(val) (((val) & 0x1) << 20)
-#define PORT_P4_DIR_P20_GET(val) ((((val) & PORT_P4_DIR_P20) >> 20) & 0x1)
-#define PORT_P4_DIR_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P20) | (((val) & 0x1) << 20))
-/* Port 4 Pin #Direction Control (19) */
-#define PORT_P4_DIR_P19 (0x1 << 19)
-#define PORT_P4_DIR_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P4_DIR_P19_GET(val) ((((val) & PORT_P4_DIR_P19) >> 19) & 0x1)
-#define PORT_P4_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P19) | (((val) & 0x1) << 19))
-/* Port 4 Pin #Direction Control (18) */
-#define PORT_P4_DIR_P18 (0x1 << 18)
-#define PORT_P4_DIR_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P4_DIR_P18_GET(val) ((((val) & PORT_P4_DIR_P18) >> 18) & 0x1)
-#define PORT_P4_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P18) | (((val) & 0x1) << 18))
-/* Port 4 Pin #Direction Control (17) */
-#define PORT_P4_DIR_P17 (0x1 << 17)
-#define PORT_P4_DIR_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P4_DIR_P17_GET(val) ((((val) & PORT_P4_DIR_P17) >> 17) & 0x1)
-#define PORT_P4_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P17) | (((val) & 0x1) << 17))
-/* Port 4 Pin #Direction Control (16) */
-#define PORT_P4_DIR_P16 (0x1 << 16)
-#define PORT_P4_DIR_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P4_DIR_P16_GET(val) ((((val) & PORT_P4_DIR_P16) >> 16) & 0x1)
-#define PORT_P4_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P16) | (((val) & 0x1) << 16))
-/* Port 4 Pin #Direction Control (15) */
-#define PORT_P4_DIR_P15 (0x1 << 15)
-#define PORT_P4_DIR_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P4_DIR_P15_GET(val) ((((val) & PORT_P4_DIR_P15) >> 15) & 0x1)
-#define PORT_P4_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P15) | (((val) & 0x1) << 15))
-/* Port 4 Pin #Direction Control (14) */
-#define PORT_P4_DIR_P14 (0x1 << 14)
-#define PORT_P4_DIR_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P4_DIR_P14_GET(val) ((((val) & PORT_P4_DIR_P14) >> 14) & 0x1)
-#define PORT_P4_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P14) | (((val) & 0x1) << 14))
-/* Port 4 Pin #Direction Control (13) */
-#define PORT_P4_DIR_P13 (0x1 << 13)
-#define PORT_P4_DIR_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P4_DIR_P13_GET(val) ((((val) & PORT_P4_DIR_P13) >> 13) & 0x1)
-#define PORT_P4_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P13) | (((val) & 0x1) << 13))
-/* Port 4 Pin #Direction Control (12) */
-#define PORT_P4_DIR_P12 (0x1 << 12)
-#define PORT_P4_DIR_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P4_DIR_P12_GET(val) ((((val) & PORT_P4_DIR_P12) >> 12) & 0x1)
-#define PORT_P4_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P12) | (((val) & 0x1) << 12))
-/* Port 4 Pin #Direction Control (11) */
-#define PORT_P4_DIR_P11 (0x1 << 11)
-#define PORT_P4_DIR_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P4_DIR_P11_GET(val) ((((val) & PORT_P4_DIR_P11) >> 11) & 0x1)
-#define PORT_P4_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P11) | (((val) & 0x1) << 11))
-/* Port 4 Pin #Direction Control (10) */
-#define PORT_P4_DIR_P10 (0x1 << 10)
-#define PORT_P4_DIR_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P4_DIR_P10_GET(val) ((((val) & PORT_P4_DIR_P10) >> 10) & 0x1)
-#define PORT_P4_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P10) | (((val) & 0x1) << 10))
-/* Port 4 Pin #Direction Control (9) */
-#define PORT_P4_DIR_P9 (0x1 << 9)
-#define PORT_P4_DIR_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P4_DIR_P9_GET(val) ((((val) & PORT_P4_DIR_P9) >> 9) & 0x1)
-#define PORT_P4_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P9) | (((val) & 0x1) << 9))
-/* Port 4 Pin #Direction Control (8) */
-#define PORT_P4_DIR_P8 (0x1 << 8)
-#define PORT_P4_DIR_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P4_DIR_P8_GET(val) ((((val) & PORT_P4_DIR_P8) >> 8) & 0x1)
-#define PORT_P4_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P8) | (((val) & 0x1) << 8))
-/* Port 4 Pin #Direction Control (7) */
-#define PORT_P4_DIR_P7 (0x1 << 7)
-#define PORT_P4_DIR_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P4_DIR_P7_GET(val) ((((val) & PORT_P4_DIR_P7) >> 7) & 0x1)
-#define PORT_P4_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P7) | (((val) & 0x1) << 7))
-/* Port 4 Pin #Direction Control (6) */
-#define PORT_P4_DIR_P6 (0x1 << 6)
-#define PORT_P4_DIR_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P4_DIR_P6_GET(val) ((((val) & PORT_P4_DIR_P6) >> 6) & 0x1)
-#define PORT_P4_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P6) | (((val) & 0x1) << 6))
-/* Port 4 Pin #Direction Control (5) */
-#define PORT_P4_DIR_P5 (0x1 << 5)
-#define PORT_P4_DIR_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P4_DIR_P5_GET(val) ((((val) & PORT_P4_DIR_P5) >> 5) & 0x1)
-#define PORT_P4_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P5) | (((val) & 0x1) << 5))
-/* Port 4 Pin #Direction Control (4) */
-#define PORT_P4_DIR_P4 (0x1 << 4)
-#define PORT_P4_DIR_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P4_DIR_P4_GET(val) ((((val) & PORT_P4_DIR_P4) >> 4) & 0x1)
-#define PORT_P4_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P4) | (((val) & 0x1) << 4))
-/* Port 4 Pin #Direction Control (3) */
-#define PORT_P4_DIR_P3 (0x1 << 3)
-#define PORT_P4_DIR_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P4_DIR_P3_GET(val) ((((val) & PORT_P4_DIR_P3) >> 3) & 0x1)
-#define PORT_P4_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P3) | (((val) & 0x1) << 3))
-/* Port 4 Pin #Direction Control (2) */
-#define PORT_P4_DIR_P2 (0x1 << 2)
-#define PORT_P4_DIR_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P4_DIR_P2_GET(val) ((((val) & PORT_P4_DIR_P2) >> 2) & 0x1)
-#define PORT_P4_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P2) | (((val) & 0x1) << 2))
-/* Port 4 Pin #Direction Control (1) */
-#define PORT_P4_DIR_P1 (0x1 << 1)
-#define PORT_P4_DIR_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P4_DIR_P1_GET(val) ((((val) & PORT_P4_DIR_P1) >> 1) & 0x1)
-#define PORT_P4_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P1) | (((val) & 0x1) << 1))
-/* Port 4 Pin #Direction Control (0) */
-#define PORT_P4_DIR_P0 (0x1)
-#define PORT_P4_DIR_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P4_DIR_P0_GET(val) ((((val) & PORT_P4_DIR_P0) >> 0) & 0x1)
-#define PORT_P4_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 4 Alternate Function Select Register 0
- ******************************************************************************/
-
-/* Alternate Function at Port 4 Bit # (23) */
-#define PORT_P4_ALTSEL0_P23 (0x1 << 23)
-#define PORT_P4_ALTSEL0_P23_VAL(val) (((val) & 0x1) << 23)
-#define PORT_P4_ALTSEL0_P23_GET(val) ((((val) & PORT_P4_ALTSEL0_P23) >> 23) & 0x1)
-#define PORT_P4_ALTSEL0_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P23) | (((val) & 0x1) << 23))
-/* Alternate Function at Port 4 Bit # (22) */
-#define PORT_P4_ALTSEL0_P22 (0x1 << 22)
-#define PORT_P4_ALTSEL0_P22_VAL(val) (((val) & 0x1) << 22)
-#define PORT_P4_ALTSEL0_P22_GET(val) ((((val) & PORT_P4_ALTSEL0_P22) >> 22) & 0x1)
-#define PORT_P4_ALTSEL0_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P22) | (((val) & 0x1) << 22))
-/* Alternate Function at Port 4 Bit # (21) */
-#define PORT_P4_ALTSEL0_P21 (0x1 << 21)
-#define PORT_P4_ALTSEL0_P21_VAL(val) (((val) & 0x1) << 21)
-#define PORT_P4_ALTSEL0_P21_GET(val) ((((val) & PORT_P4_ALTSEL0_P21) >> 21) & 0x1)
-#define PORT_P4_ALTSEL0_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P21) | (((val) & 0x1) << 21))
-/* Alternate Function at Port 4 Bit # (20) */
-#define PORT_P4_ALTSEL0_P20 (0x1 << 20)
-#define PORT_P4_ALTSEL0_P20_VAL(val) (((val) & 0x1) << 20)
-#define PORT_P4_ALTSEL0_P20_GET(val) ((((val) & PORT_P4_ALTSEL0_P20) >> 20) & 0x1)
-#define PORT_P4_ALTSEL0_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P20) | (((val) & 0x1) << 20))
-/* Alternate Function at Port 4 Bit # (19) */
-#define PORT_P4_ALTSEL0_P19 (0x1 << 19)
-#define PORT_P4_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P4_ALTSEL0_P19_GET(val) ((((val) & PORT_P4_ALTSEL0_P19) >> 19) & 0x1)
-#define PORT_P4_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P19) | (((val) & 0x1) << 19))
-/* Alternate Function at Port 4 Bit # (18) */
-#define PORT_P4_ALTSEL0_P18 (0x1 << 18)
-#define PORT_P4_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P4_ALTSEL0_P18_GET(val) ((((val) & PORT_P4_ALTSEL0_P18) >> 18) & 0x1)
-#define PORT_P4_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P18) | (((val) & 0x1) << 18))
-/* Alternate Function at Port 4 Bit # (17) */
-#define PORT_P4_ALTSEL0_P17 (0x1 << 17)
-#define PORT_P4_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P4_ALTSEL0_P17_GET(val) ((((val) & PORT_P4_ALTSEL0_P17) >> 17) & 0x1)
-#define PORT_P4_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P17) | (((val) & 0x1) << 17))
-/* Alternate Function at Port 4 Bit # (16) */
-#define PORT_P4_ALTSEL0_P16 (0x1 << 16)
-#define PORT_P4_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P4_ALTSEL0_P16_GET(val) ((((val) & PORT_P4_ALTSEL0_P16) >> 16) & 0x1)
-#define PORT_P4_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P16) | (((val) & 0x1) << 16))
-/* Alternate Function at Port 4 Bit # (15) */
-#define PORT_P4_ALTSEL0_P15 (0x1 << 15)
-#define PORT_P4_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P4_ALTSEL0_P15_GET(val) ((((val) & PORT_P4_ALTSEL0_P15) >> 15) & 0x1)
-#define PORT_P4_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P15) | (((val) & 0x1) << 15))
-/* Alternate Function at Port 4 Bit # (14) */
-#define PORT_P4_ALTSEL0_P14 (0x1 << 14)
-#define PORT_P4_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P4_ALTSEL0_P14_GET(val) ((((val) & PORT_P4_ALTSEL0_P14) >> 14) & 0x1)
-#define PORT_P4_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P14) | (((val) & 0x1) << 14))
-/* Alternate Function at Port 4 Bit # (13) */
-#define PORT_P4_ALTSEL0_P13 (0x1 << 13)
-#define PORT_P4_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P4_ALTSEL0_P13_GET(val) ((((val) & PORT_P4_ALTSEL0_P13) >> 13) & 0x1)
-#define PORT_P4_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P13) | (((val) & 0x1) << 13))
-/* Alternate Function at Port 4 Bit # (12) */
-#define PORT_P4_ALTSEL0_P12 (0x1 << 12)
-#define PORT_P4_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P4_ALTSEL0_P12_GET(val) ((((val) & PORT_P4_ALTSEL0_P12) >> 12) & 0x1)
-#define PORT_P4_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P12) | (((val) & 0x1) << 12))
-/* Alternate Function at Port 4 Bit # (11) */
-#define PORT_P4_ALTSEL0_P11 (0x1 << 11)
-#define PORT_P4_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P4_ALTSEL0_P11_GET(val) ((((val) & PORT_P4_ALTSEL0_P11) >> 11) & 0x1)
-#define PORT_P4_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P11) | (((val) & 0x1) << 11))
-/* Alternate Function at Port 4 Bit # (10) */
-#define PORT_P4_ALTSEL0_P10 (0x1 << 10)
-#define PORT_P4_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P4_ALTSEL0_P10_GET(val) ((((val) & PORT_P4_ALTSEL0_P10) >> 10) & 0x1)
-#define PORT_P4_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P10) | (((val) & 0x1) << 10))
-/* Alternate Function at Port 4 Bit # (9) */
-#define PORT_P4_ALTSEL0_P9 (0x1 << 9)
-#define PORT_P4_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P4_ALTSEL0_P9_GET(val) ((((val) & PORT_P4_ALTSEL0_P9) >> 9) & 0x1)
-#define PORT_P4_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P9) | (((val) & 0x1) << 9))
-/* Alternate Function at Port 4 Bit # (8) */
-#define PORT_P4_ALTSEL0_P8 (0x1 << 8)
-#define PORT_P4_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P4_ALTSEL0_P8_GET(val) ((((val) & PORT_P4_ALTSEL0_P8) >> 8) & 0x1)
-#define PORT_P4_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P8) | (((val) & 0x1) << 8))
-/* Alternate Function at Port 4 Bit # (7) */
-#define PORT_P4_ALTSEL0_P7 (0x1 << 7)
-#define PORT_P4_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P4_ALTSEL0_P7_GET(val) ((((val) & PORT_P4_ALTSEL0_P7) >> 7) & 0x1)
-#define PORT_P4_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P7) | (((val) & 0x1) << 7))
-/* Alternate Function at Port 4 Bit # (6) */
-#define PORT_P4_ALTSEL0_P6 (0x1 << 6)
-#define PORT_P4_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P4_ALTSEL0_P6_GET(val) ((((val) & PORT_P4_ALTSEL0_P6) >> 6) & 0x1)
-#define PORT_P4_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P6) | (((val) & 0x1) << 6))
-/* Alternate Function at Port 4 Bit # (5) */
-#define PORT_P4_ALTSEL0_P5 (0x1 << 5)
-#define PORT_P4_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P4_ALTSEL0_P5_GET(val) ((((val) & PORT_P4_ALTSEL0_P5) >> 5) & 0x1)
-#define PORT_P4_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P5) | (((val) & 0x1) << 5))
-/* Alternate Function at Port 4 Bit # (4) */
-#define PORT_P4_ALTSEL0_P4 (0x1 << 4)
-#define PORT_P4_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P4_ALTSEL0_P4_GET(val) ((((val) & PORT_P4_ALTSEL0_P4) >> 4) & 0x1)
-#define PORT_P4_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P4) | (((val) & 0x1) << 4))
-/* Alternate Function at Port 4 Bit # (3) */
-#define PORT_P4_ALTSEL0_P3 (0x1 << 3)
-#define PORT_P4_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P4_ALTSEL0_P3_GET(val) ((((val) & PORT_P4_ALTSEL0_P3) >> 3) & 0x1)
-#define PORT_P4_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P3) | (((val) & 0x1) << 3))
-/* Alternate Function at Port 4 Bit # (2) */
-#define PORT_P4_ALTSEL0_P2 (0x1 << 2)
-#define PORT_P4_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P4_ALTSEL0_P2_GET(val) ((((val) & PORT_P4_ALTSEL0_P2) >> 2) & 0x1)
-#define PORT_P4_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P2) | (((val) & 0x1) << 2))
-/* Alternate Function at Port 4 Bit # (1) */
-#define PORT_P4_ALTSEL0_P1 (0x1 << 1)
-#define PORT_P4_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P4_ALTSEL0_P1_GET(val) ((((val) & PORT_P4_ALTSEL0_P1) >> 1) & 0x1)
-#define PORT_P4_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P1) | (((val) & 0x1) << 1))
-/* Alternate Function at Port 4 Bit # (0) */
-#define PORT_P4_ALTSEL0_P0 (0x1)
-#define PORT_P4_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P4_ALTSEL0_P0_GET(val) ((((val) & PORT_P4_ALTSEL0_P0) >> 0) & 0x1)
-#define PORT_P4_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * Port 4 Pull Up Device Enable Register
- ******************************************************************************/
-
-/* Pull Up Device Enable at Port 4 Bit # (23) */
-#define PORT_P4_PUEN_P23 (0x1 << 23)
-#define PORT_P4_PUEN_P23_VAL(val) (((val) & 0x1) << 23)
-#define PORT_P4_PUEN_P23_GET(val) ((((val) & PORT_P4_PUEN_P23) >> 23) & 0x1)
-#define PORT_P4_PUEN_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P23) | (((val) & 0x1) << 23))
-/* Pull Up Device Enable at Port 4 Bit # (22) */
-#define PORT_P4_PUEN_P22 (0x1 << 22)
-#define PORT_P4_PUEN_P22_VAL(val) (((val) & 0x1) << 22)
-#define PORT_P4_PUEN_P22_GET(val) ((((val) & PORT_P4_PUEN_P22) >> 22) & 0x1)
-#define PORT_P4_PUEN_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P22) | (((val) & 0x1) << 22))
-/* Pull Up Device Enable at Port 4 Bit # (21) */
-#define PORT_P4_PUEN_P21 (0x1 << 21)
-#define PORT_P4_PUEN_P21_VAL(val) (((val) & 0x1) << 21)
-#define PORT_P4_PUEN_P21_GET(val) ((((val) & PORT_P4_PUEN_P21) >> 21) & 0x1)
-#define PORT_P4_PUEN_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P21) | (((val) & 0x1) << 21))
-/* Pull Up Device Enable at Port 4 Bit # (20) */
-#define PORT_P4_PUEN_P20 (0x1 << 20)
-#define PORT_P4_PUEN_P20_VAL(val) (((val) & 0x1) << 20)
-#define PORT_P4_PUEN_P20_GET(val) ((((val) & PORT_P4_PUEN_P20) >> 20) & 0x1)
-#define PORT_P4_PUEN_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P20) | (((val) & 0x1) << 20))
-/* Pull Up Device Enable at Port 4 Bit # (19) */
-#define PORT_P4_PUEN_P19 (0x1 << 19)
-#define PORT_P4_PUEN_P19_VAL(val) (((val) & 0x1) << 19)
-#define PORT_P4_PUEN_P19_GET(val) ((((val) & PORT_P4_PUEN_P19) >> 19) & 0x1)
-#define PORT_P4_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P19) | (((val) & 0x1) << 19))
-/* Pull Up Device Enable at Port 4 Bit # (18) */
-#define PORT_P4_PUEN_P18 (0x1 << 18)
-#define PORT_P4_PUEN_P18_VAL(val) (((val) & 0x1) << 18)
-#define PORT_P4_PUEN_P18_GET(val) ((((val) & PORT_P4_PUEN_P18) >> 18) & 0x1)
-#define PORT_P4_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P18) | (((val) & 0x1) << 18))
-/* Pull Up Device Enable at Port 4 Bit # (17) */
-#define PORT_P4_PUEN_P17 (0x1 << 17)
-#define PORT_P4_PUEN_P17_VAL(val) (((val) & 0x1) << 17)
-#define PORT_P4_PUEN_P17_GET(val) ((((val) & PORT_P4_PUEN_P17) >> 17) & 0x1)
-#define PORT_P4_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P17) | (((val) & 0x1) << 17))
-/* Pull Up Device Enable at Port 4 Bit # (16) */
-#define PORT_P4_PUEN_P16 (0x1 << 16)
-#define PORT_P4_PUEN_P16_VAL(val) (((val) & 0x1) << 16)
-#define PORT_P4_PUEN_P16_GET(val) ((((val) & PORT_P4_PUEN_P16) >> 16) & 0x1)
-#define PORT_P4_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P16) | (((val) & 0x1) << 16))
-/* Pull Up Device Enable at Port 4 Bit # (15) */
-#define PORT_P4_PUEN_P15 (0x1 << 15)
-#define PORT_P4_PUEN_P15_VAL(val) (((val) & 0x1) << 15)
-#define PORT_P4_PUEN_P15_GET(val) ((((val) & PORT_P4_PUEN_P15) >> 15) & 0x1)
-#define PORT_P4_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P15) | (((val) & 0x1) << 15))
-/* Pull Up Device Enable at Port 4 Bit # (14) */
-#define PORT_P4_PUEN_P14 (0x1 << 14)
-#define PORT_P4_PUEN_P14_VAL(val) (((val) & 0x1) << 14)
-#define PORT_P4_PUEN_P14_GET(val) ((((val) & PORT_P4_PUEN_P14) >> 14) & 0x1)
-#define PORT_P4_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P14) | (((val) & 0x1) << 14))
-/* Pull Up Device Enable at Port 4 Bit # (13) */
-#define PORT_P4_PUEN_P13 (0x1 << 13)
-#define PORT_P4_PUEN_P13_VAL(val) (((val) & 0x1) << 13)
-#define PORT_P4_PUEN_P13_GET(val) ((((val) & PORT_P4_PUEN_P13) >> 13) & 0x1)
-#define PORT_P4_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P13) | (((val) & 0x1) << 13))
-/* Pull Up Device Enable at Port 4 Bit # (12) */
-#define PORT_P4_PUEN_P12 (0x1 << 12)
-#define PORT_P4_PUEN_P12_VAL(val) (((val) & 0x1) << 12)
-#define PORT_P4_PUEN_P12_GET(val) ((((val) & PORT_P4_PUEN_P12) >> 12) & 0x1)
-#define PORT_P4_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P12) | (((val) & 0x1) << 12))
-/* Pull Up Device Enable at Port 4 Bit # (11) */
-#define PORT_P4_PUEN_P11 (0x1 << 11)
-#define PORT_P4_PUEN_P11_VAL(val) (((val) & 0x1) << 11)
-#define PORT_P4_PUEN_P11_GET(val) ((((val) & PORT_P4_PUEN_P11) >> 11) & 0x1)
-#define PORT_P4_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P11) | (((val) & 0x1) << 11))
-/* Pull Up Device Enable at Port 4 Bit # (10) */
-#define PORT_P4_PUEN_P10 (0x1 << 10)
-#define PORT_P4_PUEN_P10_VAL(val) (((val) & 0x1) << 10)
-#define PORT_P4_PUEN_P10_GET(val) ((((val) & PORT_P4_PUEN_P10) >> 10) & 0x1)
-#define PORT_P4_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P10) | (((val) & 0x1) << 10))
-/* Pull Up Device Enable at Port 4 Bit # (9) */
-#define PORT_P4_PUEN_P9 (0x1 << 9)
-#define PORT_P4_PUEN_P9_VAL(val) (((val) & 0x1) << 9)
-#define PORT_P4_PUEN_P9_GET(val) ((((val) & PORT_P4_PUEN_P9) >> 9) & 0x1)
-#define PORT_P4_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P9) | (((val) & 0x1) << 9))
-/* Pull Up Device Enable at Port 4 Bit # (8) */
-#define PORT_P4_PUEN_P8 (0x1 << 8)
-#define PORT_P4_PUEN_P8_VAL(val) (((val) & 0x1) << 8)
-#define PORT_P4_PUEN_P8_GET(val) ((((val) & PORT_P4_PUEN_P8) >> 8) & 0x1)
-#define PORT_P4_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P8) | (((val) & 0x1) << 8))
-/* Pull Up Device Enable at Port 4 Bit # (7) */
-#define PORT_P4_PUEN_P7 (0x1 << 7)
-#define PORT_P4_PUEN_P7_VAL(val) (((val) & 0x1) << 7)
-#define PORT_P4_PUEN_P7_GET(val) ((((val) & PORT_P4_PUEN_P7) >> 7) & 0x1)
-#define PORT_P4_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P7) | (((val) & 0x1) << 7))
-/* Pull Up Device Enable at Port 4 Bit # (6) */
-#define PORT_P4_PUEN_P6 (0x1 << 6)
-#define PORT_P4_PUEN_P6_VAL(val) (((val) & 0x1) << 6)
-#define PORT_P4_PUEN_P6_GET(val) ((((val) & PORT_P4_PUEN_P6) >> 6) & 0x1)
-#define PORT_P4_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P6) | (((val) & 0x1) << 6))
-/* Pull Up Device Enable at Port 4 Bit # (5) */
-#define PORT_P4_PUEN_P5 (0x1 << 5)
-#define PORT_P4_PUEN_P5_VAL(val) (((val) & 0x1) << 5)
-#define PORT_P4_PUEN_P5_GET(val) ((((val) & PORT_P4_PUEN_P5) >> 5) & 0x1)
-#define PORT_P4_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P5) | (((val) & 0x1) << 5))
-/* Pull Up Device Enable at Port 4 Bit # (4) */
-#define PORT_P4_PUEN_P4 (0x1 << 4)
-#define PORT_P4_PUEN_P4_VAL(val) (((val) & 0x1) << 4)
-#define PORT_P4_PUEN_P4_GET(val) ((((val) & PORT_P4_PUEN_P4) >> 4) & 0x1)
-#define PORT_P4_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P4) | (((val) & 0x1) << 4))
-/* Pull Up Device Enable at Port 4 Bit # (3) */
-#define PORT_P4_PUEN_P3 (0x1 << 3)
-#define PORT_P4_PUEN_P3_VAL(val) (((val) & 0x1) << 3)
-#define PORT_P4_PUEN_P3_GET(val) ((((val) & PORT_P4_PUEN_P3) >> 3) & 0x1)
-#define PORT_P4_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P3) | (((val) & 0x1) << 3))
-/* Pull Up Device Enable at Port 4 Bit # (2) */
-#define PORT_P4_PUEN_P2 (0x1 << 2)
-#define PORT_P4_PUEN_P2_VAL(val) (((val) & 0x1) << 2)
-#define PORT_P4_PUEN_P2_GET(val) ((((val) & PORT_P4_PUEN_P2) >> 2) & 0x1)
-#define PORT_P4_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P2) | (((val) & 0x1) << 2))
-/* Pull Up Device Enable at Port 4 Bit # (1) */
-#define PORT_P4_PUEN_P1 (0x1 << 1)
-#define PORT_P4_PUEN_P1_VAL(val) (((val) & 0x1) << 1)
-#define PORT_P4_PUEN_P1_GET(val) ((((val) & PORT_P4_PUEN_P1) >> 1) & 0x1)
-#define PORT_P4_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P1) | (((val) & 0x1) << 1))
-/* Pull Up Device Enable at Port 4 Bit # (0) */
-#define PORT_P4_PUEN_P0 (0x1)
-#define PORT_P4_PUEN_P0_VAL(val) (((val) & 0x1) << 0)
-#define PORT_P4_PUEN_P0_GET(val) ((((val) & PORT_P4_PUEN_P0) >> 0) & 0x1)
-#define PORT_P4_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P0) | (((val) & 0x1) << 0))
-
-#endif /* __PORT_H */
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ssc_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ssc_reg.h
deleted file mode 100644
index 4ea2f5a685..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/ssc_reg.h
+++ /dev/null
@@ -1,624 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __SSC_REG_H
-#define __SSC_REG_H
-
-/** SSC register structure */
-struct svip_reg_ssc {
- volatile unsigned long clc; /* 0x00 */
- volatile unsigned long pisel; /* 0x04 */
- volatile unsigned long id; /* 0x08 */
- volatile unsigned long reserved0; /* 0x0c */
- volatile unsigned long mcon; /* 0x10 */
- volatile unsigned long state; /* 0x14 */
- volatile unsigned long whbstate; /* 0x18 */
- volatile unsigned long reserved1; /* 0x1c */
- volatile unsigned long tb; /* 0x20 */
- volatile unsigned long rb; /* 0x24 */
- volatile unsigned long reserved2[2]; /* 0x28 */
- volatile unsigned long rxfcon; /* 0x30 */
- volatile unsigned long txfcon; /* 0x34 */
- volatile unsigned long fstat; /* 0x38 */
- volatile unsigned long reserved3; /* 0x3c */
- volatile unsigned long br; /* 0x40 */
- volatile unsigned long brstat; /* 0x44 */
- volatile unsigned long reserved4[6]; /* 0x48 */
- volatile unsigned long sfcon; /* 0x60 */
- volatile unsigned long sfstat; /* 0x64 */
- volatile unsigned long reserved5[2]; /* 0x68 */
- volatile unsigned long gpocon; /* 0x70 */
- volatile unsigned long gpostat; /* 0x74 */
- volatile unsigned long whbgpostat; /* 0x78 */
- volatile unsigned long reserved6; /* 0x7c */
- volatile unsigned long rxreq; /* 0x80 */
- volatile unsigned long rxcnt; /* 0x84 */
- volatile unsigned long reserved7[25]; /* 0x88 */
- volatile unsigned long dma_con; /* 0xEC */
- volatile unsigned long reserved8; /* 0xf0 */
- volatile unsigned long irnen; /* 0xF4 */
- volatile unsigned long irncr; /* 0xF8 */
- volatile unsigned long irnicr; /* 0xFC */
-};
-
-/*******************************************************************************
- * CLC Register
- ******************************************************************************/
-
-/* Clock Divider for Sleep Mode (23:16) */
-#define SSC_CLC_SMC (0xff << 16)
-#define SSC_CLC_SMC_VAL(val) (((val) & 0xff) << 16)
-#define SSC_CLC_SMC_GET(val) ((((val) & SSC_CLC_SMC) >> 16) & 0xff)
-#define SSC_CLC_SMC_SET(reg,val) (reg) = ((reg & ~SSC_CLC_SMC) | (((val) & 0xff) << 16))
-/* Clock Divider for Normal Run Mode (15:8) */
-#define SSC_CLC_RMC (0xff << 8)
-#define SSC_CLC_RMC_VAL(val) (((val) & 0xff) << 8)
-#define SSC_CLC_RMC_GET(val) ((((val) & SSC_CLC_RMC) >> 8) & 0xff)
-#define SSC_CLC_RMC_SET(reg,val) (reg) = ((reg & ~SSC_CLC_RMC) | (((val) & 0xff) << 8))
-/* Fast Shut-Off Enable Bit (5) */
-#define SSC_CLC_FSOE (0x1 << 5)
-#define SSC_CLC_FSOE_VAL(val) (((val) & 0x1) << 5)
-#define SSC_CLC_FSOE_GET(val) ((((val) & SSC_CLC_FSOE) >> 5) & 0x1)
-#define SSC_CLC_FSOE_SET(reg,val) (reg) = ((reg & ~SSC_CLC_FSOE) | (((val) & 0x1) << 5))
-/* Suspend Bit Write Enable for OCDS (4) */
-#define SSC_CLC_SBWE (0x1 << 4)
-#define SSC_CLC_SBWE_VAL(val) (((val) & 0x1) << 4)
-#define SSC_CLC_SBWE_SET(reg,val) (reg) = (((reg & ~SSC_CLC_SBWE) | (val) & 1) << 4)
-/* External Request Disable (3) */
-#define SSC_CLC_EDIS (0x1 << 3)
-#define SSC_CLC_EDIS_VAL(val) (((val) & 0x1) << 3)
-#define SSC_CLC_EDIS_GET(val) ((((val) & SSC_CLC_EDIS) >> 3) & 0x1)
-#define SSC_CLC_EDIS_SET(reg,val) (reg) = ((reg & ~SSC_CLC_EDIS) | (((val) & 0x1) << 3))
-/* Suspend Enable Bit for OCDS (2) */
-#define SSC_CLC_SPEN (0x1 << 2)
-#define SSC_CLC_SPEN_VAL(val) (((val) & 0x1) << 2)
-#define SSC_CLC_SPEN_GET(val) ((((val) & SSC_CLC_SPEN) >> 2) & 0x1)
-#define SSC_CLC_SPEN_SET(reg,val) (reg) = ((reg & ~SSC_CLC_SPEN) | (((val) & 0x1) << 2))
-/* Disable Status Bit (1) */
-#define SSC_CLC_DISS (0x1 << 1)
-#define SSC_CLC_DISS_GET(val) ((((val) & SSC_CLC_DISS) >> 1) & 0x1)
-/* Disable Request Bit (0) */
-#define SSC_CLC_DISR (0x1)
-#define SSC_CLC_DISR_VAL(val) (((val) & 0x1) << 0)
-#define SSC_CLC_DISR_GET(val) ((((val) & SSC_CLC_DISR) >> 0) & 0x1)
-#define SSC_CLC_DISR_SET(reg,val) (reg) = ((reg & ~SSC_CLC_DISR) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * ID Register
- ******************************************************************************/
-
-/* Transmit FIFO Size (29:24) */
-#define SSC_ID_TXFS (0x3f << 24)
-#define SSC_ID_TXFS_GET(val) ((((val) & SSC_ID_TXFS) >> 24) & 0x3f)
-/* Receive FIFO Size (21:16) */
-#define SSC_ID_RXFS (0x3f << 16)
-#define SSC_ID_RXFS_GET(val) ((((val) & SSC_ID_RXFS) >> 16) & 0x3f)
-/* Module ID (15:8) */
-#define SSC_ID_ID (0xff << 8)
-#define SSC_ID_ID_GET(val) ((((val) & SSC_ID_ID) >> 8) & 0xff)
-/* Configuration (5) */
-#define SSC_ID_CFG (0x1 << 5)
-#define SSC_ID_CFG_GET(val) ((((val) & SSC_ID_CFG) >> 5) & 0x1)
-/* Revision (4:0) */
-#define SSC_ID_REV (0x1f)
-#define SSC_ID_REV_GET(val) ((((val) & SSC_ID_REV) >> 0) & 0x1f)
-
-/*******************************************************************************
- * MCON Register
- ******************************************************************************/
-
-/* Echo Mode (24) */
-#define SSC_MCON_EM (0x1 << 24)
-#define SSC_MCON_EM_VAL(val) (((val) & 0x1) << 24)
-#define SSC_MCON_EM_GET(val) ((((val) & SSC_MCON_EM) >> 24) & 0x1)
-#define SSC_MCON_EM_SET(reg,val) (reg) = ((reg & ~SSC_MCON_EM) | (((val) & 0x1) << 24))
-/* Idle Bit Value (23) */
-#define SSC_MCON_IDLE (0x1 << 23)
-#define SSC_MCON_IDLE_VAL(val) (((val) & 0x1) << 23)
-#define SSC_MCON_IDLE_GET(val) ((((val) & SSC_MCON_IDLE) >> 23) & 0x1)
-#define SSC_MCON_IDLE_SET(reg,val) (reg) = ((reg & ~SSC_MCON_IDLE) | (((val) & 0x1) << 23))
-/* Enable Byte Valid Control (22) */
-#define SSC_MCON_ENBV (0x1 << 22)
-#define SSC_MCON_ENBV_VAL(val) (((val) & 0x1) << 22)
-#define SSC_MCON_ENBV_GET(val) ((((val) & SSC_MCON_ENBV) >> 22) & 0x1)
-#define SSC_MCON_ENBV_SET(reg,val) (reg) = ((reg & ~SSC_MCON_ENBV) | (((val) & 0x1) << 22))
-/* Data Width Selection (20:16) */
-#define SSC_MCON_BM (0x1f << 16)
-#define SSC_MCON_BM_VAL(val) (((val) & 0x1f) << 16)
-#define SSC_MCON_BM_GET(val) ((((val) & SSC_MCON_BM) >> 16) & 0x1f)
-#define SSC_MCON_BM_SET(reg,val) (reg) = ((reg & ~SSC_MCON_BM) | (((val) & 0x1f) << 16))
-/* Receive Underflow Error Enable (12) */
-#define SSC_MCON_RUEN (0x1 << 12)
-#define SSC_MCON_RUEN_VAL(val) (((val) & 0x1) << 12)
-#define SSC_MCON_RUEN_GET(val) ((((val) & SSC_MCON_RUEN) >> 12) & 0x1)
-#define SSC_MCON_RUEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_RUEN) | (((val) & 0x1) << 12))
-/* Transmit Underflow Error Enable (11) */
-#define SSC_MCON_TUEN (0x1 << 11)
-#define SSC_MCON_TUEN_VAL(val) (((val) & 0x1) << 11)
-#define SSC_MCON_TUEN_GET(val) ((((val) & SSC_MCON_TUEN) >> 11) & 0x1)
-#define SSC_MCON_TUEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_TUEN) | (((val) & 0x1) << 11))
-/* Abort Error Enable (10) */
-#define SSC_MCON_AEN (0x1 << 10)
-#define SSC_MCON_AEN_VAL(val) (((val) & 0x1) << 10)
-#define SSC_MCON_AEN_GET(val) ((((val) & SSC_MCON_AEN) >> 10) & 0x1)
-#define SSC_MCON_AEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_AEN) | (((val) & 0x1) << 10))
-/* Receive Overflow Error Enable (9) */
-#define SSC_MCON_REN (0x1 << 9)
-#define SSC_MCON_REN_VAL(val) (((val) & 0x1) << 9)
-#define SSC_MCON_REN_GET(val) ((((val) & SSC_MCON_REN) >> 9) & 0x1)
-#define SSC_MCON_REN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_REN) | (((val) & 0x1) << 9))
-/* Transmit Overflow Error Enable (8) */
-#define SSC_MCON_TEN (0x1 << 8)
-#define SSC_MCON_TEN_VAL(val) (((val) & 0x1) << 8)
-#define SSC_MCON_TEN_GET(val) ((((val) & SSC_MCON_TEN) >> 8) & 0x1)
-#define SSC_MCON_TEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_TEN) | (((val) & 0x1) << 8))
-/* Loop Back Control (7) */
-#define SSC_MCON_LB (0x1 << 7)
-#define SSC_MCON_LB_VAL(val) (((val) & 0x1) << 7)
-#define SSC_MCON_LB_GET(val) ((((val) & SSC_MCON_LB) >> 7) & 0x1)
-#define SSC_MCON_LB_SET(reg,val) (reg) = ((reg & ~SSC_MCON_LB) | (((val) & 0x1) << 7))
-/* Clock Polarity Control (6) */
-#define SSC_MCON_PO (0x1 << 6)
-#define SSC_MCON_PO_VAL(val) (((val) & 0x1) << 6)
-#define SSC_MCON_PO_GET(val) ((((val) & SSC_MCON_PO) >> 6) & 0x1)
-#define SSC_MCON_PO_SET(reg,val) (reg) = ((reg & ~SSC_MCON_PO) | (((val) & 0x1) << 6))
-/* Clock Phase Control (5) */
-#define SSC_MCON_PH (0x1 << 5)
-#define SSC_MCON_PH_VAL(val) (((val) & 0x1) << 5)
-#define SSC_MCON_PH_GET(val) ((((val) & SSC_MCON_PH) >> 5) & 0x1)
-#define SSC_MCON_PH_SET(reg,val) (reg) = ((reg & ~SSC_MCON_PH) | (((val) & 0x1) << 5))
-/* Heading Control (4) */
-#define SSC_MCON_HB (0x1 << 4)
-#define SSC_MCON_HB_VAL(val) (((val) & 0x1) << 4)
-#define SSC_MCON_HB_GET(val) ((((val) & SSC_MCON_HB) >> 4) & 0x1)
-#define SSC_MCON_HB_SET(reg,val) (reg) = ((reg & ~SSC_MCON_HB) | (((val) & 0x1) << 4))
-/* Chip Select Enable (3) */
-#define SSC_MCON_CSBEN (0x1 << 3)
-#define SSC_MCON_CSBEN_VAL(val) (((val) & 0x1) << 3)
-#define SSC_MCON_CSBEN_GET(val) ((((val) & SSC_MCON_CSBEN) >> 3) & 0x1)
-#define SSC_MCON_CSBEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_CSBEN) | (((val) & 0x1) << 3))
-/* Chip Select Invert (2) */
-#define SSC_MCON_CSBINV (0x1 << 2)
-#define SSC_MCON_CSBINV_VAL(val) (((val) & 0x1) << 2)
-#define SSC_MCON_CSBINV_GET(val) ((((val) & SSC_MCON_CSBINV) >> 2) & 0x1)
-#define SSC_MCON_CSBINV_SET(reg,val) (reg) = ((reg & ~SSC_MCON_CSBINV) | (((val) & 0x1) << 2))
-/* Receive Off (1) */
-#define SSC_MCON_RXOFF (0x1 << 1)
-#define SSC_MCON_RXOFF_VAL(val) (((val) & 0x1) << 1)
-#define SSC_MCON_RXOFF_GET(val) ((((val) & SSC_MCON_RXOFF) >> 1) & 0x1)
-#define SSC_MCON_RXOFF_SET(reg,val) (reg) = ((reg & ~SSC_MCON_RXOFF) | (((val) & 0x1) << 1))
-/* Transmit Off (0) */
-#define SSC_MCON_TXOFF (0x1)
-#define SSC_MCON_TXOFF_VAL(val) (((val) & 0x1) << 0)
-#define SSC_MCON_TXOFF_GET(val) ((((val) & SSC_MCON_TXOFF) >> 0) & 0x1)
-#define SSC_MCON_TXOFF_SET(reg,val) (reg) = ((reg & ~SSC_MCON_TXOFF) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * STATE Register
- ******************************************************************************/
-
-/* Receive End-of-Message (31) */
-#define SSC_STATE_RXEOM (0x1 << 31)
-#define SSC_STATE_RXEOM_GET(val) ((((val) & SSC_STATE_RXEOM) >> 31) & 0x1)
-/* Receive Byte Valid (30:28) */
-#define SSC_STATE_RXBV (0x7 << 28)
-#define SSC_STATE_RXBV_GET(val) ((((val) & SSC_STATE_RXBV) >> 28) & 0x7)
-/* Transmit End-of-Message (27) */
-#define SSC_STATE_TXEOM (0x1 << 27)
-#define SSC_STATE_TXEOM_GET(val) ((((val) & SSC_STATE_TXEOM) >> 27) & 0x1)
-/* Transmit Byte Valid (26:24) */
-#define SSC_STATE_TXBV (0x7 << 24)
-#define SSC_STATE_TXBV_GET(val) ((((val) & SSC_STATE_TXBV) >> 24) & 0x7)
-/* Bit Count Field (20:16) */
-#define SSC_STATE_BC (0x1f << 16)
-#define SSC_STATE_BC_GET(val) ((((val) & SSC_STATE_BC) >> 16) & 0x1f)
-/* Busy Flag (13) */
-#define SSC_STATE_BSY (0x1 << 13)
-#define SSC_STATE_BSY_GET(val) ((((val) & SSC_STATE_BSY) >> 13) & 0x1)
-/* Receive Underflow Error Flag (12) */
-#define SSC_STATE_RUE (0x1 << 12)
-#define SSC_STATE_RUE_GET(val) ((((val) & SSC_STATE_RUE) >> 12) & 0x1)
-/* Transmit Underflow Error Flag (11) */
-#define SSC_STATE_TUE (0x1 << 11)
-#define SSC_STATE_TUE_GET(val) ((((val) & SSC_STATE_TUE) >> 11) & 0x1)
-/* Abort Error Flag (10) */
-#define SSC_STATE_AE (0x1 << 10)
-#define SSC_STATE_AE_GET(val) ((((val) & SSC_STATE_AE) >> 10) & 0x1)
-/* Receive Error Flag (9) */
-#define SSC_STATE_RE (0x1 << 9)
-#define SSC_STATE_RE_GET(val) ((((val) & SSC_STATE_RE) >> 9) & 0x1)
-/* Transmit Error Flag (8) */
-#define SSC_STATE_TE (0x1 << 8)
-#define SSC_STATE_TE_GET(val) ((((val) & SSC_STATE_TE) >> 8) & 0x1)
-/* Mode Error Flag (7) */
-#define SSC_STATE_ME (0x1 << 7)
-#define SSC_STATE_ME_GET(val) ((((val) & SSC_STATE_ME) >> 7) & 0x1)
-/* Slave Selected (2) */
-#define SSC_STATE_SSEL (0x1 << 2)
-#define SSC_STATE_SSEL_GET(val) ((((val) & SSC_STATE_SSEL) >> 2) & 0x1)
-/* Master Select Bit (1) */
-#define SSC_STATE_MS (0x1 << 1)
-#define SSC_STATE_MS_GET(val) ((((val) & SSC_STATE_MS) >> 1) & 0x1)
-/* Enable Bit (0) */
-#define SSC_STATE_EN (0x1)
-#define SSC_STATE_EN_GET(val) ((((val) & SSC_STATE_EN) >> 0) & 0x1)
-
-/*******************************************************************************
- * WHBSTATE Register
- ******************************************************************************/
-
-/* Set Transmit Underflow Error Flag Bit (15) */
-#define SSC_WHBSTATE_SETTUE (0x1 << 15)
-#define SSC_WHBSTATE_SETTUE_VAL(val) (((val) & 0x1) << 15)
-#define SSC_WHBSTATE_SETTUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETTUE) | (val) & 1) << 15)
-/* Set Abort Error Flag Bit (14) */
-#define SSC_WHBSTATE_SETAE (0x1 << 14)
-#define SSC_WHBSTATE_SETAE_VAL(val) (((val) & 0x1) << 14)
-#define SSC_WHBSTATE_SETAE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETAE) | (val) & 1) << 14)
-/* Set Receive Error Flag Bit (13) */
-#define SSC_WHBSTATE_SETRE (0x1 << 13)
-#define SSC_WHBSTATE_SETRE_VAL(val) (((val) & 0x1) << 13)
-#define SSC_WHBSTATE_SETRE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETRE) | (val) & 1) << 13)
-/* Set Transmit Error Flag Bit (12) */
-#define SSC_WHBSTATE_SETTE (0x1 << 12)
-#define SSC_WHBSTATE_SETTE_VAL(val) (((val) & 0x1) << 12)
-#define SSC_WHBSTATE_SETTE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETTE) | (val) & 1) << 12)
-/* Clear Transmit Underflow Error Flag Bit (11) */
-#define SSC_WHBSTATE_CLRTUE (0x1 << 11)
-#define SSC_WHBSTATE_CLRTUE_VAL(val) (((val) & 0x1) << 11)
-#define SSC_WHBSTATE_CLRTUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRTUE) | (val) & 1) << 11)
-/* Clear Abort Error Flag Bit (10) */
-#define SSC_WHBSTATE_CLRAE (0x1 << 10)
-#define SSC_WHBSTATE_CLRAE_VAL(val) (((val) & 0x1) << 10)
-#define SSC_WHBSTATE_CLRAE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRAE) | (val) & 1) << 10)
-/* Clear Receive Error Flag Bit (9) */
-#define SSC_WHBSTATE_CLRRE (0x1 << 9)
-#define SSC_WHBSTATE_CLRRE_VAL(val) (((val) & 0x1) << 9)
-#define SSC_WHBSTATE_CLRRE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRRE) | (val) & 1) << 9)
-/* Clear Transmit Error Flag Bit (8) */
-#define SSC_WHBSTATE_CLRTE (0x1 << 8)
-#define SSC_WHBSTATE_CLRTE_VAL(val) (((val) & 0x1) << 8)
-#define SSC_WHBSTATE_CLRTE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRTE) | (val) & 1) << 8)
-/* Set Mode Error Flag Bit (7) */
-#define SSC_WHBSTATE_SETME (0x1 << 7)
-#define SSC_WHBSTATE_SETME_VAL(val) (((val) & 0x1) << 7)
-#define SSC_WHBSTATE_SETME_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETME) | (val) & 1) << 7)
-/* Clear Mode Error Flag Bit (6) */
-#define SSC_WHBSTATE_CLRME (0x1 << 6)
-#define SSC_WHBSTATE_CLRME_VAL(val) (((val) & 0x1) << 6)
-#define SSC_WHBSTATE_CLRME_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRME) | (val) & 1) << 6)
-/* Set Receive Underflow Error Bit (5) */
-#define SSC_WHBSTATE_SETRUE (0x1 << 5)
-#define SSC_WHBSTATE_SETRUE_VAL(val) (((val) & 0x1) << 5)
-#define SSC_WHBSTATE_SETRUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETRUE) | (val) & 1) << 5)
-/* Clear Receive Underflow Error Bit (4) */
-#define SSC_WHBSTATE_CLRRUE (0x1 << 4)
-#define SSC_WHBSTATE_CLRRUE_VAL(val) (((val) & 0x1) << 4)
-#define SSC_WHBSTATE_CLRRUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRRUE) | (val) & 1) << 4)
-/* Set Master Select Bit (3) */
-#define SSC_WHBSTATE_SETMS (0x1 << 3)
-#define SSC_WHBSTATE_SETMS_VAL(val) (((val) & 0x1) << 3)
-#define SSC_WHBSTATE_SETMS_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETMS) | (val) & 1) << 3)
-/* Clear Master Select Bit (2) */
-#define SSC_WHBSTATE_CLRMS (0x1 << 2)
-#define SSC_WHBSTATE_CLRMS_VAL(val) (((val) & 0x1) << 2)
-#define SSC_WHBSTATE_CLRMS_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRMS) | (val) & 1) << 2)
-/* Set Enable Bit (1) */
-#define SSC_WHBSTATE_SETEN (0x1 << 1)
-#define SSC_WHBSTATE_SETEN_VAL(val) (((val) & 0x1) << 1)
-#define SSC_WHBSTATE_SETEN_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETEN) | (val) & 1) << 1)
-/* Clear Enable Bit (0) */
-#define SSC_WHBSTATE_CLREN (0x1)
-#define SSC_WHBSTATE_CLREN_VAL(val) (((val) & 0x1) << 0)
-#define SSC_WHBSTATE_CLREN_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLREN) | (val) & 1) << 0)
-
-/*******************************************************************************
- * TB Register
- ******************************************************************************/
-
-/* Transmit Data Register Value (31:0) */
-#define SSC_TB_TB_VAL (0xFFFFFFFFL)
-#define SSC_TB_TB_VAL_VAL(val) (((val) & 0xFFFFFFFFL) << 0)
-#define SSC_TB_TB_VAL_GET(val) ((((val) & SSC_TB_TB_VAL) >> 0) & 0xFFFFFFFFL)
-#define SSC_TB_TB_VAL_SET(reg,val) (reg) = ((reg & ~SSC_TB_TB_VAL) | (((val) & 0xFFFFFFFFL) << 0))
-
-/*******************************************************************************
- * RB Register
- ******************************************************************************/
-
-/* Receive Data Register Value (31:0) */
-#define SSC_RB_RB_VAL (0xFFFFFFFFL)
-#define SSC_RB_RB_VAL_GET(val) ((((val) & SSC_RB_RB_VAL) >> 0) & 0xFFFFFFFFL)
-
-/*******************************************************************************
- * FSTAT Register
- ******************************************************************************/
-
-/* Transmit FIFO Filling Level (13:8) */
-#define SSC_FSTAT_TXFFL (0x3f << 8)
-#define SSC_FSTAT_TXFFL_GET(val) ((((val) & SSC_FSTAT_TXFFL) >> 8) & 0x3f)
-/* Receive FIFO Filling Level (5:0) */
-#define SSC_FSTAT_RXFFL (0x3f)
-#define SSC_FSTAT_RXFFL_GET(val) ((((val) & SSC_FSTAT_RXFFL) >> 0) & 0x3f)
-
-/*******************************************************************************
- * PISEL Register
- ******************************************************************************/
-
-/* Slave Mode Clock Input Select (2) */
-#define SSC_PISEL_CIS (0x1 << 2)
-#define SSC_PISEL_CIS_VAL(val) (((val) & 0x1) << 2)
-#define SSC_PISEL_CIS_GET(val) ((((val) & SSC_PISEL_CIS) >> 2) & 0x1)
-#define SSC_PISEL_CIS_SET(reg,val) (reg) = ((reg & ~SSC_PISEL_CIS) | (((val) & 0x1) << 2))
-/* Slave Mode Receiver Input Select (1) */
-#define SSC_PISEL_SIS (0x1 << 1)
-#define SSC_PISEL_SIS_VAL(val) (((val) & 0x1) << 1)
-#define SSC_PISEL_SIS_GET(val) ((((val) & SSC_PISEL_SIS) >> 1) & 0x1)
-#define SSC_PISEL_SIS_SET(reg,val) (reg) = ((reg & ~SSC_PISEL_SIS) | (((val) & 0x1) << 1))
-/* Master Mode Receiver Input Select (0) */
-#define SSC_PISEL_MIS (0x1)
-#define SSC_PISEL_MIS_VAL(val) (((val) & 0x1) << 0)
-#define SSC_PISEL_MIS_GET(val) ((((val) & SSC_PISEL_MIS) >> 0) & 0x1)
-#define SSC_PISEL_MIS_SET(reg,val) (reg) = ((reg & ~SSC_PISEL_MIS) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * RXFCON Register
- ******************************************************************************/
-
-/* Receive FIFO Interrupt Trigger Level (13:8) */
-#define SSC_RXFCON_RXFITL (0x3f << 8)
-#define SSC_RXFCON_RXFITL_VAL(val) (((val) & 0x3f) << 8)
-#define SSC_RXFCON_RXFITL_GET(val) ((((val) & SSC_RXFCON_RXFITL) >> 8) & 0x3f)
-#define SSC_RXFCON_RXFITL_SET(reg,val) (reg) = ((reg & ~SSC_RXFCON_RXFITL) | (((val) & 0x3f) << 8))
-/* Receive FIFO Flush (1) */
-#define SSC_RXFCON_RXFLU (0x1 << 1)
-#define SSC_RXFCON_RXFLU_VAL(val) (((val) & 0x1) << 1)
-#define SSC_RXFCON_RXFLU_SET(reg,val) (reg) = (((reg & ~SSC_RXFCON_RXFLU) | (val) & 1) << 1)
-/* Receive FIFO Enable (0) */
-#define SSC_RXFCON_RXFEN (0x1)
-#define SSC_RXFCON_RXFEN_VAL(val) (((val) & 0x1) << 0)
-#define SSC_RXFCON_RXFEN_GET(val) ((((val) & SSC_RXFCON_RXFEN) >> 0) & 0x1)
-#define SSC_RXFCON_RXFEN_SET(reg,val) (reg) = ((reg & ~SSC_RXFCON_RXFEN) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * TXFCON Register
- ******************************************************************************/
-
-/* Transmit FIFO Interrupt Trigger Level (13:8) */
-#define SSC_TXFCON_TXFITL (0x3f << 8)
-#define SSC_TXFCON_TXFITL_VAL(val) (((val) & 0x3f) << 8)
-#define SSC_TXFCON_TXFITL_GET(val) ((((val) & SSC_TXFCON_TXFITL) >> 8) & 0x3f)
-#define SSC_TXFCON_TXFITL_SET(reg,val) (reg) = ((reg & ~SSC_TXFCON_TXFITL) | (((val) & 0x3f) << 8))
-/* Transmit FIFO Flush (1) */
-#define SSC_TXFCON_TXFLU (0x1 << 1)
-#define SSC_TXFCON_TXFLU_VAL(val) (((val) & 0x1) << 1)
-#define SSC_TXFCON_TXFLU_SET(reg,val) (reg) = (((reg & ~SSC_TXFCON_TXFLU) | (val) & 1) << 1)
-/* Transmit FIFO Enable (0) */
-#define SSC_TXFCON_TXFEN (0x1)
-#define SSC_TXFCON_TXFEN_VAL(val) (((val) & 0x1) << 0)
-#define SSC_TXFCON_TXFEN_GET(val) ((((val) & SSC_TXFCON_TXFEN) >> 0) & 0x1)
-#define SSC_TXFCON_TXFEN_SET(reg,val) (reg) = ((reg & ~SSC_TXFCON_TXFEN) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * BR Register
- ******************************************************************************/
-
-/* Baudrate Timer Reload Register Value (15:0) */
-#define SSC_BR_BR_VAL (0xffff)
-#define SSC_BR_BR_VAL_VAL(val) (((val) & 0xffff) << 0)
-#define SSC_BR_BR_VAL_GET(val) ((((val) & SSC_BR_BR_VAL) >> 0) & 0xffff)
-#define SSC_BR_BR_VAL_SET(reg,val) (reg) = ((reg & ~SSC_BR_BR_VAL) | (((val) & 0xffff) << 0))
-
-/*******************************************************************************
- * BRSTAT Register
- ******************************************************************************/
-
-/* Baudrate Timer Register Value (15:0) */
-#define SSC_BRSTAT_BT_VAL (0xffff)
-#define SSC_BRSTAT_BT_VAL_GET(val) ((((val) & SSC_BRSTAT_BT_VAL) >> 0) & 0xffff)
-
-/*******************************************************************************
- * SFCON Register
- ******************************************************************************/
-
-/* Pause Length (31:22) */
-#define SSC_SFCON_PLEN (0x3ff << 22)
-#define SSC_SFCON_PLEN_VAL(val) (((val) & 0x3ff) << 22)
-#define SSC_SFCON_PLEN_GET(val) ((((val) & SSC_SFCON_PLEN) >> 22) & 0x3ff)
-#define SSC_SFCON_PLEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_PLEN) | (((val) & 0x3ff) << 22))
-/* Stop After Pause (20) */
-#define SSC_SFCON_STOP (0x1 << 20)
-#define SSC_SFCON_STOP_VAL(val) (((val) & 0x1) << 20)
-#define SSC_SFCON_STOP_GET(val) ((((val) & SSC_SFCON_STOP) >> 20) & 0x1)
-#define SSC_SFCON_STOP_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_STOP) | (((val) & 0x1) << 20))
-/* Idle Clock Configuration (19:18) */
-#define SSC_SFCON_ICLK (0x3 << 18)
-#define SSC_SFCON_ICLK_VAL(val) (((val) & 0x3) << 18)
-#define SSC_SFCON_ICLK_GET(val) ((((val) & SSC_SFCON_ICLK) >> 18) & 0x3)
-#define SSC_SFCON_ICLK_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_ICLK) | (((val) & 0x3) << 18))
-/* Idle Data Configuration (17:16) */
-#define SSC_SFCON_IDAT (0x3 << 16)
-#define SSC_SFCON_IDAT_VAL(val) (((val) & 0x3) << 16)
-#define SSC_SFCON_IDAT_GET(val) ((((val) & SSC_SFCON_IDAT) >> 16) & 0x3)
-#define SSC_SFCON_IDAT_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_IDAT) | (((val) & 0x3) << 16))
-/* Data Length (15:4) */
-#define SSC_SFCON_DLEN (0xfff << 4)
-#define SSC_SFCON_DLEN_VAL(val) (((val) & 0xfff) << 4)
-#define SSC_SFCON_DLEN_GET(val) ((((val) & SSC_SFCON_DLEN) >> 4) & 0xfff)
-#define SSC_SFCON_DLEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_DLEN) | (((val) & 0xfff) << 4))
-/* Enable Interrupt After Pause (3) */
-#define SSC_SFCON_IAEN (0x1 << 3)
-#define SSC_SFCON_IAEN_VAL(val) (((val) & 0x1) << 3)
-#define SSC_SFCON_IAEN_GET(val) ((((val) & SSC_SFCON_IAEN) >> 3) & 0x1)
-#define SSC_SFCON_IAEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_IAEN) | (((val) & 0x1) << 3))
-/* Enable Interrupt Before Pause (2) */
-#define SSC_SFCON_IBEN (0x1 << 2)
-#define SSC_SFCON_IBEN_VAL(val) (((val) & 0x1) << 2)
-#define SSC_SFCON_IBEN_GET(val) ((((val) & SSC_SFCON_IBEN) >> 2) & 0x1)
-#define SSC_SFCON_IBEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_IBEN) | (((val) & 0x1) << 2))
-/* Serial Frame Enable (0) */
-#define SSC_SFCON_SFEN (0x1)
-#define SSC_SFCON_SFEN_VAL(val) (((val) & 0x1) << 0)
-#define SSC_SFCON_SFEN_GET(val) ((((val) & SSC_SFCON_SFEN) >> 0) & 0x1)
-#define SSC_SFCON_SFEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_SFEN) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * SFSTAT Register
- ******************************************************************************/
-
-/* Pause Count (31:22) */
-#define SSC_SFSTAT_PCNT (0x3ff << 22)
-#define SSC_SFSTAT_PCNT_GET(val) ((((val) & SSC_SFSTAT_PCNT) >> 22) & 0x3ff)
-/* Data Bit Count (15:4) */
-#define SSC_SFSTAT_DCNT (0xfff << 4)
-#define SSC_SFSTAT_DCNT_GET(val) ((((val) & SSC_SFSTAT_DCNT) >> 4) & 0xfff)
-/* Pause Busy (1) */
-#define SSC_SFSTAT_PBSY (0x1 << 1)
-#define SSC_SFSTAT_PBSY_GET(val) ((((val) & SSC_SFSTAT_PBSY) >> 1) & 0x1)
-/* Data Busy (0) */
-#define SSC_SFSTAT_DBSY (0x1)
-#define SSC_SFSTAT_DBSY_GET(val) ((((val) & SSC_SFSTAT_DBSY) >> 0) & 0x1)
-
-/*******************************************************************************
- * GPOCON Register
- ******************************************************************************/
-
-/* Output OUTn Is Chip Select (15:8) */
-#define SSC_GPOCON_ISCSBN (0xff << 8)
-#define SSC_GPOCON_ISCSBN_VAL(val) (((val) & 0xff) << 8)
-#define SSC_GPOCON_ISCSBN_GET(val) ((((val) & SSC_GPOCON_ISCSBN) >> 8) & 0xff)
-#define SSC_GPOCON_ISCSBN_SET(reg,val) (reg) = ((reg & ~SSC_GPOCON_ISCSBN) | (((val) & 0xff) << 8))
-/* Invert Output OUTn (7:0) */
-#define SSC_GPOCON_INVOUTN (0xff)
-#define SSC_GPOCON_INVOUTN_VAL(val) (((val) & 0xff) << 0)
-#define SSC_GPOCON_INVOUTN_GET(val) ((((val) & SSC_GPOCON_INVOUTN) >> 0) & 0xff)
-#define SSC_GPOCON_INVOUTN_SET(reg,val) (reg) = ((reg & ~SSC_GPOCON_INVOUTN) | (((val) & 0xff) << 0))
-
-/*******************************************************************************
- * GPOSTAT Register
- ******************************************************************************/
-
-/* Output Register Bit n (7:0) */
-#define SSC_GPOSTAT_OUTN (0xff)
-#define SSC_GPOSTAT_OUTN_GET(val) ((((val) & SSC_GPOSTAT_OUTN) >> 0) & 0xff)
-
-/*******************************************************************************
- * WHBGPOSTAT
- ******************************************************************************/
-
-/* Set Output Register Bit n (15:8) */
-#define SSC_WHBGPOSTAT_SETOUTN (0xff << 8)
-#define SSC_WHBGPOSTAT_SETOUTN_VAL(val) (((val) & 0xff) << 8)
-#define SSC_WHBGPOSTAT_SETOUTN_SET(reg,val) (reg) = (((reg & ~SSC_WHBGPOSTAT_SETOUTN) | (val) & 1) << 8)
-/* Clear Output Register Bit n (7:0) */
-#define SSC_WHBGPOSTAT_CLROUTN (0xff)
-#define SSC_WHBGPOSTAT_CLROUTN_VAL(val) (((val) & 0xff) << 0)
-#define SSC_WHBGPOSTAT_CLROUTN_SET(reg,val) (reg) = (((reg & ~SSC_WHBGPOSTAT_CLROUTN) | (val) & 1) << 0)
-
-/*******************************************************************************
- * RXREQ Register
- ******************************************************************************/
-
-/* Receive Count Value (15:0) */
-#define SSC_RXREQ_RXCNT (0xffff)
-#define SSC_RXREQ_RXCNT_VAL(val) (((val) & 0xffff) << 0)
-#define SSC_RXREQ_RXCNT_GET(val) ((((val) & SSC_RXREQ_RXCNT) >> 0) & 0xffff)
-#define SSC_RXREQ_RXCNT_SET(reg,val) (reg) = ((reg & ~SSC_RXREQ_RXCNT) | (((val) & 0xffff) << 0))
-
-/*******************************************************************************
- * RXCNT Register
- ******************************************************************************/
-
-/* Receive To Do Value (15:0) */
-#define SSC_RXCNT_TODO (0xffff)
-#define SSC_RXCNT_TODO_GET(val) ((((val) & SSC_RXCNT_TODO) >> 0) & 0xffff)
-
-/*******************************************************************************
- * DMA_CON Register
- ******************************************************************************/
-
-/* Receive Class (3:2) */
-#define SSC_DMA_CON_RXCLS (0x3 << 2)
-#define SSC_DMA_CON_RXCLS_VAL(val) (((val) & 0x3) << 2)
-#define SSC_DMA_CON_RXCLS_GET(val) ((((val) & SSC_DMA_CON_RXCLS) >> 2) & 0x3)
-#define SSC_DMA_CON_RXCLS_SET(reg,val) (reg) = ((reg & ~SSC_DMA_CON_RXCLS) | (((val) & 0x3) << 2))
-/* Transmit Path On (1) */
-#define SSC_DMA_CON_TXON (0x1 << 1)
-#define SSC_DMA_CON_TXON_VAL(val) (((val) & 0x1) << 1)
-#define SSC_DMA_CON_TXON_GET(val) ((((val) & SSC_DMA_CON_TXON) >> 1) & 0x1)
-#define SSC_DMA_CON_TXON_SET(reg,val) (reg) = ((reg & ~SSC_DMA_CON_TXON) | (((val) & 0x1) << 1))
-/* Receive Path On (0) */
-#define SSC_DMA_CON_RXON (0x1)
-#define SSC_DMA_CON_RXON_VAL(val) (((val) & 0x1) << 0)
-#define SSC_DMA_CON_RXON_GET(val) ((((val) & SSC_DMA_CON_RXON) >> 0) & 0x1)
-#define SSC_DMA_CON_RXON_SET(reg,val) (reg) = ((reg & ~SSC_DMA_CON_RXON) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * IRNEN Register
- ******************************************************************************/
-
-/* Frame End Interrupt Request Enable (3) */
-#define SSC_IRNEN_F (0x1 << 3)
-#define SSC_IRNEN_F_VAL(val) (((val) & 0x1) << 3)
-#define SSC_IRNEN_F_GET(val) ((((val) & SSC_IRNEN_F) >> 3) & 0x1)
-#define SSC_IRNEN_F_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_F) | (((val) & 0x1) << 3))
-/* Error Interrupt Request Enable (2) */
-#define SSC_IRNEN_E (0x1 << 2)
-#define SSC_IRNEN_E_VAL(val) (((val) & 0x1) << 2)
-#define SSC_IRNEN_E_GET(val) ((((val) & SSC_IRNEN_E) >> 2) & 0x1)
-#define SSC_IRNEN_E_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_E) | (((val) & 0x1) << 2))
-/* Receive Interrupt Request Enable (1) */
-#define SSC_IRNEN_R (0x1 << 1)
-#define SSC_IRNEN_R_VAL(val) (((val) & 0x1) << 1)
-#define SSC_IRNEN_R_GET(val) ((((val) & SSC_IRNEN_R) >> 1) & 0x1)
-#define SSC_IRNEN_R_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_R) | (((val) & 0x1) << 1))
-/* Transmit Interrupt Request Enable (0) */
-#define SSC_IRNEN_T (0x1)
-#define SSC_IRNEN_T_VAL(val) (((val) & 0x1) << 0)
-#define SSC_IRNEN_T_GET(val) ((((val) & SSC_IRNEN_T) >> 0) & 0x1)
-#define SSC_IRNEN_T_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_T) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * IRNICR Register
- ******************************************************************************/
-
-/* Frame End Interrupt Request (3) */
-#define SSC_IRNICR_F (0x1 << 3)
-#define SSC_IRNICR_F_GET(val) ((((val) & SSC_IRNICR_F) >> 3) & 0x1)
-/* Error Interrupt Request (2) */
-#define SSC_IRNICR_E (0x1 << 2)
-#define SSC_IRNICR_E_GET(val) ((((val) & SSC_IRNICR_E) >> 2) & 0x1)
-/* Receive Interrupt Request (1) */
-#define SSC_IRNICR_R (0x1 << 1)
-#define SSC_IRNICR_R_GET(val) ((((val) & SSC_IRNICR_R) >> 1) & 0x1)
-/* Transmit Interrupt Request (0) */
-#define SSC_IRNICR_T (0x1)
-#define SSC_IRNICR_T_GET(val) ((((val) & SSC_IRNICR_T) >> 0) & 0x1)
-
-/*******************************************************************************
- * IRNCR Register
- ******************************************************************************/
-
-/* Frame End Interrupt Request (3) */
-#define SSC_IRNCR_F (0x1 << 3)
-#define SSC_IRNCR_F_GET(val) ((((val) & SSC_IRNCR_F) >> 3) & 0x1)
-/* Error Interrupt Request (2) */
-#define SSC_IRNCR_E (0x1 << 2)
-#define SSC_IRNCR_E_GET(val) ((((val) & SSC_IRNCR_E) >> 2) & 0x1)
-/* Receive Interrupt Request (1) */
-#define SSC_IRNCR_R (0x1 << 1)
-#define SSC_IRNCR_R_GET(val) ((((val) & SSC_IRNCR_R) >> 1) & 0x1)
-/* Transmit Interrupt Request (0) */
-#define SSC_IRNCR_T (0x1)
-#define SSC_IRNCR_T_GET(val) ((((val) & SSC_IRNCR_T) >> 0) & 0x1)
-
-#endif /* __SSC_H */
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/status_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/status_reg.h
deleted file mode 100644
index 100230fa7c..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/status_reg.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __STATUS_REG_H
-#define __STATUS_REG_H
-
-#define status_r32(reg) ltq_r32(&status->reg)
-#define status_w32(val, reg) ltq_w32(val, &status->reg)
-#define status_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &status->reg)
-
-/** STATUS register structure */
-struct svip_reg_status {
- unsigned long fuse_deu; /* 0x0000 */
- unsigned long fuse_cpu; /* 0x0004 */
- unsigned long fuse_pll; /* 0x0008 */
- unsigned long chipid; /* 0x000C */
- unsigned long config; /* 0x0010 */
- unsigned long chip_loc; /* 0x0014 */
- unsigned long fuse_spare; /* 0x0018 */
-};
-
-/*******************************************************************************
- * Fuse for DEU Settings
- ******************************************************************************/
-
-/* Fuse for Enabling the TRNG (6) */
-#define STATUS_FUSE_DEU_TRNG (0x1 << 6)
-#define STATUS_FUSE_DEU_TRNG_GET(val) ((((val) & STATUS_FUSE_DEU_TRNG) >> 6) & 0x1)
-/* Fuse for Enabling the DES Submodule (5) */
-#define STATUS_FUSE_DEU_DES (0x1 << 5)
-#define STATUS_FUSE_DEU_DES_GET(val) ((((val) & STATUS_FUSE_DEU_DES) >> 5) & 0x1)
-/* Fuse for Enabling the 3DES Submodule (4) */
-#define STATUS_FUSE_DEU_3DES (0x1 << 4)
-#define STATUS_FUSE_DEU_3DES_GET(val) ((((val) & STATUS_FUSE_DEU_3DES) >> 4) & 0x1)
-/* Fuse for Enabling the AES Submodule (3) */
-#define STATUS_FUSE_DEU_AES (0x1 << 3)
-#define STATUS_FUSE_DEU_AES_GET(val) ((((val) & STATUS_FUSE_DEU_AES) >> 3) & 0x1)
-/* Fuse for Enabling the HASH Submodule (2) */
-#define STATUS_FUSE_DEU_HASH (0x1 << 2)
-#define STATUS_FUSE_DEU_HASH_GET(val) ((((val) & STATUS_FUSE_DEU_HASH) >> 2) & 0x1)
-/* Fuse for Enabling the ARC4 Submodule (1) */
-#define STATUS_FUSE_DEU_ARC4 (0x1 << 1)
-#define STATUS_FUSE_DEU_ARC4_GET(val) ((((val) & STATUS_FUSE_DEU_ARC4) >> 1) & 0x1)
-/* Fuse for Enabling the DEU Module (0) */
-#define STATUS_FUSE_DEU_DEU (0x1)
-#define STATUS_FUSE_DEU_DEU_GET(val) ((((val) & STATUS_FUSE_DEU_DEU) >> 0) & 0x1)
-
-/*******************************************************************************
- * Fuse for CPU Settings
- ******************************************************************************/
-
-/* Fuse for Enabling CPU5 (5) */
-#define STATUS_FUSE_CPU_CPU5 (0x1 << 5)
-#define STATUS_FUSE_CPU_CPU5_GET(val) ((((val) & STATUS_FUSE_CPU_CPU5) >> 5) & 0x1)
-/* Fuse for Enabling the CPU4 (4) */
-#define STATUS_FUSE_CPU_CPU4 (0x1 << 4)
-#define STATUS_FUSE_CPU_CPU4_GET(val) ((((val) & STATUS_FUSE_CPU_CPU4) >> 4) & 0x1)
-/* Fuse for Enabling the CPU3 (3) */
-#define STATUS_FUSE_CPU_CPU3 (0x1 << 3)
-#define STATUS_FUSE_CPU_CPU3_GET(val) ((((val) & STATUS_FUSE_CPU_CPU3) >> 3) & 0x1)
-/* Fuse for Enabling the CPU2 (2) */
-#define STATUS_FUSE_CPU_CPU2 (0x1 << 2)
-#define STATUS_FUSE_CPU_CPU2_GET(val) ((((val) & STATUS_FUSE_CPU_CPU2) >> 2) & 0x1)
-/* Fuse for Enabling the CPU1 (1) */
-#define STATUS_FUSE_CPU_CPU1 (0x1 << 1)
-#define STATUS_FUSE_CPU_CPU1_GET(val) ((((val) & STATUS_FUSE_CPU_CPU1) >> 1) & 0x1)
-/* Fuse for Enabling the CPU0 (0) */
-#define STATUS_FUSE_CPU_CPU0 (0x1)
-#define STATUS_FUSE_CPU_CPU0_GET(val) ((((val) & STATUS_FUSE_CPU_CPU0) >> 0) & 0x1)
-
-/*******************************************************************************
- * Fuse for PLL Settings
- ******************************************************************************/
-
-/* Fuse for Enabling PLL (7:0) */
-#define STATUS_FUSE_PLL_PLL (0xff)
-#define STATUS_FUSE_PLL_PLL_GET(val) ((((val) & STATUS_FUSE_PLL_PLL) >> 0) & 0xff)
-
-/*******************************************************************************
- * Chip Identification Register
- ******************************************************************************/
-
-/* Chip Version Number (31:28) */
-#define STATUS_CHIPID_VERSION (0xf << 28)
-#define STATUS_CHIPID_VERSION_GET(val) ((((val) & STATUS_CHIPID_VERSION) >> 28) & 0xf)
-/* Part Number (27:12) */
-#define STATUS_CHIPID_PART_NUMBER (0xffff << 12)
-#define STATUS_CHIPID_PART_NUMBER_GET(val) ((((val) & STATUS_CHIPID_PART_NUMBER) >> 12) & 0xffff)
-/* Manufacturer ID (11:1) */
-#define STATUS_CHIPID_MANID (0x7ff << 1)
-#define STATUS_CHIPID_MANID_GET(val) ((((val) & STATUS_CHIPID_MANID) >> 1) & 0x7ff)
-
-/*******************************************************************************
- * Chip Configuration Register
- ******************************************************************************/
-
-/* Number of Analog Channels (8:5) */
-#define STATUS_CONFIG_ANA_CHAN (0xf << 5)
-#define STATUS_CONFIG_ANA_CHAN_GET(val) ((((val) & STATUS_CONFIG_ANA_CHAN) >> 5) & 0xf)
-/* Clock Mode (4) */
-#define STATUS_CONFIG_CLK_MODE (0x1 << 1)
-#define STATUS_CONFIG_CLK_MODE_GET(val) ((((val) & STATUS_CONFIG_CLK_MODE) >> 4) & 0x1)
-/* Subversion Number (3:0) */
-#define STATUS_CONFIG_SUB_VERS (0xF)
-#define STATUS_CONFIG_SUB_VERS_GET(val) ((((val) & STATUS_SUBVER_SUB_VERS) >> 0) & 0xF)
-
-/*******************************************************************************
- * Chip Location Register
- ******************************************************************************/
-
-/* Chip Lot ID (31:16) */
-#define STATUS_CHIP_LOC_CHIP_LOT (0xffff << 16)
-#define STATUS_CHIP_LOC_CHIP_LOT_GET(val) ((((val) & STATUS_CHIP_LOC_CHIP_LOT) >> 16) & 0xffff)
-/* Chip X Coordinate (15:8) */
-#define STATUS_CHIP_LOC_CHIP_X (0xff << 8)
-#define STATUS_CHIP_LOC_CHIP_X_GET(val) ((((val) & STATUS_CHIP_LOC_CHIP_X) >> 8) & 0xff)
-/* Chip Y Coordinate (7:0) */
-#define STATUS_CHIP_LOC_CHIP_Y (0xff)
-#define STATUS_CHIP_LOC_CHIP_Y_GET(val) ((((val) & STATUS_CHIP_LOC_CHIP_Y) >> 0) & 0xff)
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_dma.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_dma.h
deleted file mode 100644
index 5c34bb6902..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_dma.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/************************************************************************
- *
- * Copyright (c) 2007
- * Infineon Technologies AG
- * St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- ************************************************************************/
-
-#ifndef __SVIP_DMA_H
-#define __SVIP_DMA_H
-
-#define LTQ_DMA_CH_ON 1
-#define LTQ_DMA_CH_OFF 0
-#define LTQ_DMA_CH_DEFAULT_WEIGHT 100;
-
-#define DMA_OWN 1
-#define CPU_OWN 0
-#define DMA_MAJOR 250
-
-/* Descriptors */
-#define DMA_DESC_OWN_CPU 0x0
-#define DMA_DESC_OWN_DMA 0x80000000
-#define DMA_DESC_CPT_SET 0x40000000
-#define DMA_DESC_SOP_SET 0x20000000
-#define DMA_DESC_EOP_SET 0x10000000
-
-struct rx_desc {
- union {
- struct {
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- volatile u32 data_length:16;
- volatile u32 reserve2:7;
- volatile u32 byte_offset:2;
- volatile u32 reserve1:3;
- volatile u32 eop:1;
- volatile u32 sop:1;
- volatile u32 c:1;
- volatile u32 own:1;
-#else
- volatile u32 own:1;
- volatile u32 c:1;
- volatile u32 sop:1;
- volatile u32 eop:1;
- volatile u32 reserve1:3;
- volatile u32 byte_offset:2;
- volatile u32 reserve2:7;
- volatile u32 data_length:16;
-#endif
- } field;
-
- volatile u32 word;
- } status;
-
- volatile u32 data_pointer;
-};
-
-struct tx_desc {
- union {
- struct {
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- volatile u32 data_length:16;
- volatile u32 reserved:7;
- volatile u32 byte_offset:5;
- volatile u32 eop:1;
- volatile u32 sop:1;
- volatile u32 c:1;
- volatile u32 own:1;
-#else
- volatile u32 own:1;
- volatile u32 c:1;
- volatile u32 sop:1;
- volatile u32 eop:1;
- volatile u32 byte_offset:5;
- volatile u32 reserved:7;
- volatile u32 data_length:16;
-#endif
- } field;
-
- volatile u32 word;
- } status;
-
- volatile u32 data_pointer;
-};
-
-/* DMA pseudo interrupts notified to switch driver */
-#define RCV_INT 0x01
-#define TX_BUF_FULL_INT 0x02
-#define TRANSMIT_CPT_INT 0x04
-#define CHANNEL_CLOSED 0x10
-
-/* Parameters for switch DMA device */
-#define DEFAULT_SW_CHANNEL_WEIGHT 3
-#define DEFAULT_SW_PORT_WEIGHT 7
-
-#define DEFAULT_SW_TX_BURST_LEN 2 /* 2 words, 4 words, 8 words */
-#define DEFAULT_SW_RX_BURST_LEN 2 /* 2 words, 4 words, 8 words */
-
-#define DEFAULT_SW_TX_CHANNEL_NUM 4
-#define DEFAULT_SW_RX_CHANNEL_NUM 4
-
-#define DEFAULT_SW_TX_CHANNEL_DESCR_NUM 20
-#define DEFAULT_SW_RX_CHANNEL_DESCR_NUM 20
-
-/* Parameters for SSC DMA device */
-#define DEFAULT_SSC_CHANNEL_WEIGHT 3
-#define DEFAULT_SSC_PORT_WEIGHT 7
-
-#define DEFAULT_SSC_TX_CHANNEL_CLASS 3
-#define DEFAULT_SSC_RX_CHANNEL_CLASS 0
-
-#define DEFAULT_SSC_TX_BURST_LEN 2 /* 2 words, 4 words, 8 words */
-#define DEFAULT_SSC_RX_BURST_LEN 2 /* 2 words, 4 words, 8 words */
-
-#define DEFAULT_SSC0_TX_CHANNEL_NUM 1
-#define DEFAULT_SSC0_RX_CHANNEL_NUM 1
-#define DEFAULT_SSC1_TX_CHANNEL_NUM 1
-#define DEFAULT_SSC1_RX_CHANNEL_NUM 1
-
-#define DEFAULT_SSC_TX_CHANNEL_DESCR_NUM 10
-#define DEFAULT_SSC_RX_CHANNEL_DESCR_NUM 10
-
-/* Parameters for memory DMA device */
-#define DEFAULT_MEM_CHANNEL_WEIGHT 3
-#define DEFAULT_MEM_PORT_WEIGHT 7
-
-#define DEFAULT_MEM_TX_BURST_LEN 4 /* 2 words, 4 words, 8 words */
-#define DEFAULT_MEM_RX_BURST_LEN 4 /* 2 words, 4 words, 8 words */
-
-#define DEFAULT_MEM_TX_CHANNEL_NUM 1
-#define DEFAULT_MEM_RX_CHANNEL_NUM 1
-
-#define DEFAULT_MEM_TX_CHANNEL_DESCR_NUM 2
-#define DEFAULT_MEM_RX_CHANNEL_DESCR_NUM 2
-
-/* Parameters for DEU DMA device */
-#define DEFAULT_DEU_CHANNEL_WEIGHT 1
-#define DEFAULT_DEU_PORT_WEIGHT 1
-
-#define DEFAULT_DEU_TX_BURST_LEN 4 /* 2 words, 4 words, 8 words */
-#define DEFAULT_DEU_RX_BURST_LEN 4 /* 2 words, 4 words, 8 words */
-
-#define DEFAULT_DEU_TX_CHANNEL_DESCR_NUM 20
-#define DEFAULT_DEU_RX_CHANNEL_DESCR_NUM 20
-
-#define DMA_DESCR_NUM 30 /* number of descriptors per channel */
-
-enum dma_dir_t {
- DIR_RX = 0,
- DIR_TX = 1,
-};
-
-struct dma_device_info;
-
-struct dma_channel_info {
- /*Pointer to the peripheral device who is using this channel*/
- /*const*/ struct dma_device_info *dma_dev;
- /*direction*/
- const enum dma_dir_t dir; /*RX or TX*/
- /*class for this channel for QoS*/
- int pri;
- /*irq number*/
- const int irq;
- /*relative channel number*/
- const int rel_chan_no;
- /*absolute channel number*/
- int abs_chan_no;
-
- /*specify byte_offset*/
- int byte_offset;
- int tx_weight;
-
- /*descriptor parameter*/
- int desc_base;
- int desc_len;
- int curr_desc;
- int prev_desc;/*only used if it is a tx channel*/
-
- /*weight setting for WFQ algorithm*/
- int weight;
- int default_weight;
-
- int packet_size;
-
- /*status of this channel*/
- int control; /*on or off*/
- int xfer_cnt;
- int dur; /*descriptor underrun*/
-
- /**optional information for the upper layer devices*/
- void *opt[DMA_DESCR_NUM];
-
- /*channel operations*/
- int (*open)(struct dma_channel_info *ch);
- int (*close)(struct dma_channel_info *ch);
- int (*reset)(struct dma_channel_info *ch);
- void (*enable_irq)(struct dma_channel_info *ch);
- void (*disable_irq)(struct dma_channel_info *ch);
-};
-
-
-struct dma_device_info {
- /*device name of this peripheral*/
- const char device_name[16];
- const int max_rx_chan_num;
- const int max_tx_chan_num;
- int drop_enable;
-
- int reserved;
-
- int tx_burst_len;
- int rx_burst_len;
- int tx_weight;
-
- int current_tx_chan;
- int current_rx_chan;
- int num_tx_chan;
- int num_rx_chan;
- int tx_endianness_mode;
- int rx_endianness_mode;
- struct dma_channel_info *tx_chan[4];
- struct dma_channel_info *rx_chan[4];
-
- /*functions, optional*/
- u8 *(*buffer_alloc)(int len,int *offset, void **opt);
- void (*buffer_free)(u8 *dataptr, void *opt);
- int (*intr_handler)(struct dma_device_info *dma_dev, int status);
-
- /* used by peripheral driver only */
- void *priv;
-};
-
-struct dma_device_info *dma_device_reserve(char *dev_name);
-int dma_device_release(struct dma_device_info *dma_dev);
-int dma_device_register(struct dma_device_info *dma_dev);
-int dma_device_unregister(struct dma_device_info *dma_dev);
-int dma_device_read(struct dma_device_info *dma_dev, u8 **dataptr, void **opt);
-int dma_device_write(struct dma_device_info *dma_dev, u8 *dataptr,
- int len, void *opt);
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_irq.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_irq.h
deleted file mode 100644
index bca8df9fd5..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_irq.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2010 Lantiq
- */
-#ifndef __SVIP_IRQ_H
-#define __SVIP_IRQ_H
-
-#define IM_NUM 6
-
-#define INT_NUM_IRQ0 8
-#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
-#define INT_NUM_IM1_IRL0 (INT_NUM_IM0_IRL0 + 32)
-#define INT_NUM_IM2_IRL0 (INT_NUM_IM1_IRL0 + 32)
-#define INT_NUM_IM3_IRL0 (INT_NUM_IM2_IRL0 + 32)
-#define INT_NUM_IM4_IRL0 (INT_NUM_IM3_IRL0 + 32)
-#define INT_NUM_EXTRA_START (INT_NUM_IM4_IRL0 + 32)
-#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
-
-#define INT_NUM_IM5_IRL0 (INT_NUM_IRQ0 + 160)
-#define MIPS_CPU_TIMER_IRQ (INT_NUM_IM5_IRL0 + 2)
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_mux.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_mux.h
deleted file mode 100644
index 8ca3285f2c..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_mux.h
+++ /dev/null
@@ -1,467 +0,0 @@
-/************************************************************************
- *
- * Copyright (c) 2007
- * Infineon Technologies AG
- * St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- ************************************************************************/
-
-#ifndef __SVIP_MUX_H
-#define __SVIP_MUX_H
-
-#define LTQ_MUX_P0_PINS 20
-#define LTQ_MUX_P1_PINS 20
-#define LTQ_MUX_P2_PINS 19
-#define LTQ_MUX_P3_PINS 20
-#define LTQ_MUX_P4_PINS 24
-
-struct ltq_mux_pin {
- int dirin;
- int puen;
- int altsel0;
- int altsel1;
-};
-
-struct ltq_mux_settings {
- const struct ltq_mux_pin *mux_p0;
- const struct ltq_mux_pin *mux_p1;
- const struct ltq_mux_pin *mux_p2;
- const struct ltq_mux_pin *mux_p3;
- const struct ltq_mux_pin *mux_p4;
-};
-
-#define LTQ_MUX_P0_19_EXINT16 { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_19 { 0, 0, 1, 0 }
-
-#define LTQ_MUX_P0_18_EJ_BRKIN { 1, 0, 0, 0 }
-#define LTQ_MUX_P0_18 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_18_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P0_17_EXINT10 { 1, 0, 0, 0 }
-#define LTQ_MUX_P0_17 { 0, 0, 0, 0 }
-#define LTQ_MUX_P0_17_ASC1_RXD { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P0_16_EXINT9 { 1, 0, 0, 0 }
-#define LTQ_MUX_P0_16 { 0, 0, 0, 0 }
-#define LTQ_MUX_P0_16_ASC1_TXD { 0, 0, 1, 0 }
-
-#define LTQ_MUX_P0_15_EXINT8 { 1, 0, 0, 0 }
-#define LTQ_MUX_P0_15 { 0, 0, 0, 0 }
-#define LTQ_MUX_P0_15_ASC0_RXD { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P0_14_EXINT7 { 1, 0, 0, 0 }
-#define LTQ_MUX_P0_14 { 0, 0, 0, 0 }
-#define LTQ_MUX_P0_14_ASC0_TXD { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P0_13_SSC0_CS7 { 0, 1, 0, 0 }
-#define LTQ_MUX_P0_13_EXINT6 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_13 { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_13_SSC1_CS7 { 0, 0, 0, 1 }
-#define LTQ_MUX_P0_13_SSC1_INT { 0, 0, 1, 1 }
-
-#define LTQ_MUX_P0_12_SSC0_CS6 { 0, 1, 0, 0 }
-#define LTQ_MUX_P0_12_EXINT5 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_12 { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_12_SSC1_CS6 { 0, 0, 0, 1 }
-
-#define LTQ_MUX_P0_11_SSC0_CS5 { 0, 1, 0, 0 }
-#define LTQ_MUX_P0_11_EXINT4 { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_11 { 1, 0, 0, 0 }
-#define LTQ_MUX_P0_11_SSC1_CS5 { 0, 0, 0, 1 }
-
-#define LTQ_MUX_P0_10_SSC0_CS4 { 0, 1, 0, 0 }
-#define LTQ_MUX_P0_10_EXINT3 { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_10 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_10_SSC1_CS4 { 0, 0, 0, 1 }
-
-#define LTQ_MUX_P0_9_SSC0_CS3 { 0, 1, 0, 0 }
-#define LTQ_MUX_P0_9_EXINT2 { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_9 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_9_SSC1_CS3 { 0, 0, 0, 1 }
-
-#define LTQ_MUX_P0_8_SSC0_CS2 { 0, 1, 0, 0 }
-#define LTQ_MUX_P0_8_EXINT1 { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_8 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_8_SSC1_CS2 { 0, 0, 0, 1 }
-
-#define LTQ_MUX_P0_7_SSC0_CS1 { 0, 1, 0, 0 }
-#define LTQ_MUX_P0_7_EXINT0 { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_7 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_7_SSC1_CS1 { 0, 0, 0, 1 }
-#define LTQ_MUX_P0_7_SSC1_CS0 { 1, 0, 0, 1 }
-#define LTQ_MUX_P0_7_SSC2_CS0 { 1, 0, 1, 1 }
-
-#define LTQ_MUX_P0_6_SSC0_CS0 { 0, 1, 0, 0 }
-#define LTQ_MUX_P0_6 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_6_IN { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_6_SSC1_CS0 { 0, 0, 0, 1 }
-
-#define LTQ_MUX_P0_5_SSC1_SCLK { 0, 0, 0, 0 }
-#define LTQ_MUX_P0_5 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_5_IN { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_5_SSC2_CLK { 1, 0, 0, 1 }
-
-#define LTQ_MUX_P0_4_SSC1_MRST { 1, 0, 0, 0 }
-#define LTQ_MUX_P0_4 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_4_IN { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_4_SSC2_MRST { 0, 0, 0, 1 }
-
-#define LTQ_MUX_P0_3_SSC1_MTSR { 0, 0, 0, 0 }
-#define LTQ_MUX_P0_3 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_3_IN { 1, 0, 1, 0 }
-#define LTQ_MUX_P0_3_SSC2_MTSR { 0, 0, 0, 1 }
-
-#define LTQ_MUX_P0_2_SSC0_SCLK { 0, 0, 0, 0 }
-#define LTQ_MUX_P0_2 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_2_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P0_1_SSC0_MRST { 1, 0, 0, 0 }
-#define LTQ_MUX_P0_1 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_1_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P0_0_SSC0_MTSR { 0, 0, 0, 0 }
-#define LTQ_MUX_P0_0 { 0, 0, 1, 0 }
-#define LTQ_MUX_P0_0_IN { 1, 0, 1, 0 }
-
-
-#define LTQ_MUX_P1_19_PCM3_TC1 { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_19_EXINT15 { 1, 0, 1, 0 }
-#define LTQ_MUX_P1_19 { 0, 0, 1, 0 }
-
-#define LTQ_MUX_P1_18_PCM3_FSC { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_18_EXINT11 { 1, 0, 1, 0 }
-#define LTQ_MUX_P1_18 { 0, 0, 1, 0 }
-
-#define LTQ_MUX_P1_17_PCM3_PCL { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_17_EXINT12 { 1, 0, 1, 0 }
-#define LTQ_MUX_P1_17 { 0, 0, 1, 0 }
-
-#define LTQ_MUX_P1_16_PCM3_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_16_EXINT13 { 1, 0, 1, 0 }
-#define LTQ_MUX_P1_16 { 0, 0, 1, 0 }
-
-#define LTQ_MUX_P1_15_PCM3_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_15_EXINT14 { 1, 0, 1, 0 }
-#define LTQ_MUX_P1_15 { 0, 0, 1, 0 }
-
-#define LTQ_MUX_P1_14_PCM2_TC1 { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_14 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_14_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_13_PCM2_FSC { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_13 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_13_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_12_PCM2_PCL { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_12 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_12_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_11_PCM2_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_11 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_11_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_10_PCM2_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_10 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_10_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_9_PCM1_TC1 { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_9 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_9_IN { 0, 0, 1, 0 }
-
-#define LTQ_MUX_P1_8_PCM1_FSC { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_8 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_8_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_7_PCM1_PCL { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_7 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_7_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_6_PCM1_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_6 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_6_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_5_PCM1_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_5 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_5_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_4_PCM0_TC1 { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_4 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_4_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_3_PCM0_FSC { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_3 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_3_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_2_PCM0_PCL { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_2 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_2_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_1_PCM0_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_1 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_1_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P1_0_PCM0_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P1_0 { 0, 0, 1, 0 }
-#define LTQ_MUX_P1_0_IN { 1, 0, 1, 0 }
-
-
-#define LTQ_MUX_P2_18_EBU_BC1 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_18 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_18_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_17_EBU_BC0 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_17 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_17_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_16_EBU_RDBY { 1, 0, 0, 0 }
-#define LTQ_MUX_P2_16 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_16_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_15_EBU_WAIT { 1, 0, 0, 0 }
-#define LTQ_MUX_P2_15 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_15_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_14_EBU_ALE { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_14 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_14_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_13_EBU_WR { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_13 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_13_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_12_EBU_RD { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_12 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_12_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_11_EBU_A11 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_11 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_11_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_10_EBU_A10 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_10 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_10_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_9_EBU_A9 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_9 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_9_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_8_EBU_A8 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_8 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_8_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_7_EBU_A7 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_7 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_7_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_6_EBU_A6 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_6 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_6_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_5_EBU_A5 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_5 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_5_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_4_EBU_A4 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_4 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_4_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_3_EBU_A3 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_3 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_3_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_2_EBU_A2 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_2 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_2_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_1_EBU_A1 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_1 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_1_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P2_0_EBU_A0 { 0, 0, 0, 0 }
-#define LTQ_MUX_P2_0 { 0, 0, 1, 0 }
-#define LTQ_MUX_P2_0_IN { 1, 0, 1, 0 }
-
-
-#define LTQ_MUX_P3_19_EBU_CS3 { 0, 0, 0, 0 }
-#define LTQ_MUX_P3_19 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_19_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_18_EBU_CS2 { 0, 0, 0, 0 }
-#define LTQ_MUX_P3_18 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_18_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_17_EBU_CS1 { 0, 0, 0, 0 }
-#define LTQ_MUX_P3_17 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_17_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_16_EBU_CS0 { 0, 0, 0, 0 }
-#define LTQ_MUX_P3_16 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_16_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_15_EBU_AD15 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_15 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_15_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_14_EBU_AD14 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_14 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_14_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_13_EBU_AD13 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_13 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_13_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_12_EBU_AD12 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_12 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_12_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_11_EBU_AD11 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_11 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_11_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_10_EBU_AD10 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_10 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_10_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_9_EBU_AD9 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_9 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_9_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_8_EBU_AD8 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_8 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_8_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_7_EBU_AD7 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_7 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_7_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_6_EBU_AD6 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_6 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_6_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_5_EBU_AD5 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_5 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_5_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_4_EBU_AD4 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_4 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_4_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_3_EBU_AD3 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_3 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_3_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_2_EBU_AD2 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_2 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_2_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_1_EBU_AD1 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_1 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_1_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P3_0_EBU_AD0 { 1, 0, 0, 0 }
-#define LTQ_MUX_P3_0 { 0, 0, 1, 0 }
-#define LTQ_MUX_P3_0_IN { 1, 0, 1, 0 }
-
-
-#define LTQ_MUX_P4_23_SSLIC7_CLK { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_23 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_23_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_22_SSLIC7_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_22 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_22_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_21_SSLIC7_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_21 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_21_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_20_SSLIC6_CLK { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_20 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_20_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_19_SSLIC6_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_19 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_19_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_18_SSLIC6_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_18 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_18_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_17_SSLIC5_CLK { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_17 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_17_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_16_SSLIC5_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_16 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_16_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_15_SSLIC5_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_15 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_15_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_14_SSLIC4_CLK { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_14 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_14_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_13_SSLIC4_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_13 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_13_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_12_SSLIC4_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_12 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_12_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_11_SSLIC3_CLK { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_11 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_11_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_10_SSLIC3_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_10 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_10_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_9_SSLIC3_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_9 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_9_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_8_SSLIC2_CLK { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_8 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_8_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_7_SSLIC2_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_7 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_7_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_6_SSLIC2_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_6 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_6_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_5_SSLIC1_CLK { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_5 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_5_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_4_SSLIC1_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_4 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_4_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_3_SSLIC1_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_3 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_3_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_2_SSLIC0_CLK { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_2 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_2_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_1_SSLIC0_RX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_1 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_1_IN { 1, 0, 1, 0 }
-
-#define LTQ_MUX_P4_0_SSLIC0_TX { 0, 0, 0, 0 }
-#define LTQ_MUX_P4_0 { 0, 0, 1, 0 }
-#define LTQ_MUX_P4_0_IN { 1, 0, 1, 0 }
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_pms.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_pms.h
deleted file mode 100644
index 7329711858..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/svip_pms.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/************************************************************************
- *
- * Copyright (c) 2007
- * Infineon Technologies AG
- * St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- ************************************************************************/
-
-#ifndef __SVIP_PMS_H
-#define __SVIP_PMS_H
-
-void svip_sys1_clk_enable(u32 mask);
-int svip_sys1_clk_is_enabled(u32 mask);
-
-void svip_sys2_clk_enable(u32 mask);
-int svip_sys2_clk_is_enabled(u32 mask);
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys0_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys0_reg.h
deleted file mode 100644
index 7428cccc87..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys0_reg.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __SYS0_REG_H
-#define __SYS0_REG_H
-
-#define sys0_r32(reg) ltq_r32(&sys0->reg)
-#define sys0_w32(val, reg) ltq_w32(val, &sys0->reg)
-#define sys0_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &sys0->reg)
-
-/** SYS0 register structure */
-struct svip_reg_sys0 {
- unsigned long sr; /* 0x0000 */
- unsigned long bcr; /* 0x0004 */
- unsigned long pll1cr; /* 0x0008 */
- unsigned long pll2cr; /* 0x000c */
- unsigned long tscr; /* 0x0010 */
- unsigned long phyclkr; /* 0x0014 */
-};
-
-/*******************************************************************************
- * SYS0 Status Register
- ******************************************************************************/
-
-/* Endian select pin (31) */
-#define SYS0_SR_ESEL (0x1 << 31)
-#define SYS0_SR_ESEL_GET(val) ((((val) & SYS0_SR_ESEL) >> 31) & 0x1)
-/* Boot mode pins (27:24) */
-#define SYS0_SR_BMODE (0xf << 24)
-#define SYS0_SR_BMODE_GET(val) ((((val) & SYS0_SR_BMODE) >> 24) & 0xf)
-/* PLL2 Lock (18) */
-#define SYS0_SR_PLL2LOCK (0x1 << 18)
-#define SYS0_SR_PLL2LOCK_GET(val) ((((val) & SYS0_SR_PLL2LOCK) >> 18) & 0x1)
-/* PLL1 Lock (17) */
-#define SYS0_SR_PLL1LOCK (0x1 << 17)
-#define SYS0_SR_PLL1LOCK_GET(val) ((((val) & SYS0_SR_PLL1LOCK) >> 17) & 0x1)
-/* Discrete Timing Oscillator Lock (16) */
-#define SYS0_SR_DTOLOCK (0x1 << 16)
-#define SYS0_SR_DTOLOCK_GET(val) ((((val) & SYS0_SR_DTOLOCK) >> 16) & 0x1)
-/* Hardware Reset Indication (1) */
-#define SYS0_SR_HRSTIN (0x1 << 1)
-#define SYS0_SR_HRSTIN_VAL(val) (((val) & 0x1) << 1)
-#define SYS0_SR_HRSTIN_GET(val) ((((val) & SYS0_SR_HRSTIN) >> 1) & 0x1)
-#define SYS0_SR_HRSTIN_SET(reg,val) (reg) = ((reg & ~SYS0_SR_HRSTIN) | (((val) & 0x1) << 1))
-/* Power-on Reset Indication (0) */
-#define SYS0_SR_POR (0x1 << 0)
-#define SYS0_SR_POR_VAL(val) (((val) & 0x1) << 0)
-#define SYS0_SR_POR_GET(val) ((((val) & SYS0_SR_POR) >> 0) & 0x1)
-#define SYS0_SR_POR_SET(reg,val) (reg) = ((reg & ~SYS0_SR_POR) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * SYS0 Boot Control Register
- ******************************************************************************/
-
-/* Configuration of Boot Source for CPU5 (25) */
-#define SYS0_BCR_BMODECPU5 (0x1 << 25)
-#define SYS0_BCR_BMODECPU5_VAL(val) (((val) & 0x1) << 25)
-#define SYS0_BCR_BMODECPU5_GET(val) ((((val) & SYS0_BCR_BMODECPU5) >> 25) & 0x1)
-#define SYS0_BCR_BMODECPU5_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU5) | (((val) & 0x1) << 25))
-/* Configuration of Boot Source for CPU4 (24) */
-#define SYS0_BCR_BMODECPU4 (0x1 << 24)
-#define SYS0_BCR_BMODECPU4_VAL(val) (((val) & 0x1) << 24)
-#define SYS0_BCR_BMODECPU4_GET(val) ((((val) & SYS0_BCR_BMODECPU4) >> 24) & 0x1)
-#define SYS0_BCR_BMODECPU4_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU4) | (((val) & 0x1) << 24))
-/* Configuration of Boot Source for CPU3 (23) */
-#define SYS0_BCR_BMODECPU3 (0x1 << 23)
-#define SYS0_BCR_BMODECPU3_VAL(val) (((val) & 0x1) << 23)
-#define SYS0_BCR_BMODECPU3_GET(val) ((((val) & SYS0_BCR_BMODECPU3) >> 23) & 0x1)
-#define SYS0_BCR_BMODECPU3_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU3) | (((val) & 0x1) << 23))
-/* Configuration of Boot Source for CPU2 (22) */
-#define SYS0_BCR_BMODECPU2 (0x1 << 22)
-#define SYS0_BCR_BMODECPU2_VAL(val) (((val) & 0x1) << 22)
-#define SYS0_BCR_BMODECPU2_GET(val) ((((val) & SYS0_BCR_BMODECPU2) >> 22) & 0x1)
-#define SYS0_BCR_BMODECPU2_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU2) | (((val) & 0x1) << 22))
-/* Configuration of Boot Source for CPU1 (21) */
-#define SYS0_BCR_BMODECPU1 (0x1 << 21)
-#define SYS0_BCR_BMODECPU1_VAL(val) (((val) & 0x1) << 21)
-#define SYS0_BCR_BMODECPU1_GET(val) ((((val) & SYS0_BCR_BMODECPU1) >> 21) & 0x1)
-#define SYS0_BCR_BMODECPU1_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU1) | (((val) & 0x1) << 21))
-/* Configuration of Boot Source for CPU0 (20:16) */
-#define SYS0_BCR_BMODECPU0 (0x1f << 16)
-#define SYS0_BCR_BMODECPU0_VAL(val) (((val) & 0x1f) << 16)
-#define SYS0_BCR_BMODECPU0_GET(val) ((((val) & SYS0_BCR_BMODECPU0) >> 16) & 0x1f)
-#define SYS0_BCR_BMODECPU0_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU0) | (((val) & 0x1f) << 16))
-/* Configuration of Endianess for CPU5 (5) */
-#define SYS0_BCR_ESELCPU5 (0x1 << 5)
-#define SYS0_BCR_ESELCPU5_VAL(val) (((val) & 0x1) << 5)
-#define SYS0_BCR_ESELCPU5_GET(val) ((((val) & SYS0_BCR_ESELCPU5) >> 5) & 0x1)
-#define SYS0_BCR_ESELCPU5_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU5) | (((val) & 0x1) << 5))
-/* Configuration of Endianess for CPU4 (4) */
-#define SYS0_BCR_ESELCPU4 (0x1 << 4)
-#define SYS0_BCR_ESELCPU4_VAL(val) (((val) & 0x1) << 4)
-#define SYS0_BCR_ESELCPU4_GET(val) ((((val) & SYS0_BCR_ESELCPU4) >> 4) & 0x1)
-#define SYS0_BCR_ESELCPU4_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU4) | (((val) & 0x1) << 4))
-/* Configuration of Endianess for CPU3 (3) */
-#define SYS0_BCR_ESELCPU3 (0x1 << 3)
-#define SYS0_BCR_ESELCPU3_VAL(val) (((val) & 0x1) << 3)
-#define SYS0_BCR_ESELCPU3_GET(val) ((((val) & SYS0_BCR_ESELCPU3) >> 3) & 0x1)
-#define SYS0_BCR_ESELCPU3_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU3) | (((val) & 0x1) << 3))
-/* Configuration of Endianess for CPU2 (2) */
-#define SYS0_BCR_ESELCPU2 (0x1 << 2)
-#define SYS0_BCR_ESELCPU2_VAL(val) (((val) & 0x1) << 2)
-#define SYS0_BCR_ESELCPU2_GET(val) ((((val) & SYS0_BCR_ESELCPU2) >> 2) & 0x1)
-#define SYS0_BCR_ESELCPU2_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU2) | (((val) & 0x1) << 2))
-/* Configuration of Endianess for CPU1 (1) */
-#define SYS0_BCR_ESELCPU1 (0x1 << 1)
-#define SYS0_BCR_ESELCPU1_VAL(val) (((val) & 0x1) << 1)
-#define SYS0_BCR_ESELCPU1_GET(val) ((((val) & SYS0_BCR_ESELCPU1) >> 1) & 0x1)
-#define SYS0_BCR_ESELCPU1_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU1) | (((val) & 0x1) << 1))
-/* Configuration of Endianess for CPU0 (0) */
-#define SYS0_BCR_ESELCPU0 (0x1)
-#define SYS0_BCR_ESELCPU0_VAL(val) (((val) & 0x1) << 0)
-#define SYS0_BCR_ESELCPU0_GET(val) ((((val) & SYS0_BCR_ESELCPU0) >> 0) & 0x1)
-#define SYS0_BCR_ESELCPU0_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU0) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * PLL1 Control Register
- ******************************************************************************/
-
-/* PLL1 Bypass Enable (31) */
-#define SYS0_PLL1CR_OSCBYP (0x1 << 31)
-#define SYS0_PLL1CR_OSCBYP_VAL(val) (((val) & 0x1) << 31)
-#define SYS0_PLL1CR_OSCBYP_GET(val) ((((val) & SYS0_PLL1CR_OSCBYP) >> 31) & 0x1)
-#define SYS0_PLL1CR_OSCBYP_SET(reg,val) (reg) = ((reg & ~SYS0_PLL1CR_OSCBYP) | (((val) & 0x1) << 31))
-/* PLL1 Divider Value (1:0) */
-#define SYS0_PLL1CR_PLLDIV (0x3)
-#define SYS0_PLL1CR_PLLDIV_VAL(val) (((val) & 0x3) << 0)
-#define SYS0_PLL1CR_PLLDIV_GET(val) ((((val) & SYS0_PLL1CR_PLLDIV) >> 0) & 0x3)
-#define SYS0_PLL1CR_PLLDIV_SET(reg,val) (reg) = ((reg & ~SYS0_PLL1CR_PLLDIV) | (((val) & 0x3) << 0))
-
-/*******************************************************************************
- * PLL2 Control Register
- ******************************************************************************/
-
-/* PLL2 clear deepsleep (31) */
-#define SYS0_PLL2CR_CLRDS (0x1 << 31)
-#define SYS0_PLL2CR_CLRDS_VAL(val) (((val) & 0x1) << 31)
-#define SYS0_PLL2CR_CLRDS_GET(val) ((((val) & SYS0_PLL2CR_CLRDS) >> 31) & 0x1)
-#define SYS0_PLL2CR_CLRDS_SET(reg,val) (reg) = ((reg & ~SYS0_PLL2CR_CLRDS) | (((val) & 0x1) << 31))
-/* PLL2 set deepsleep (30) */
-#define SYS0_PLL2CR_SETDS (0x1 << 30)
-#define SYS0_PLL2CR_SETDS_VAL(val) (((val) & 0x1) << 30)
-#define SYS0_PLL2CR_SETDS_GET(val) ((((val) & SYS0_PLL2CR_SETDS) >> 30) & 0x1)
-#define SYS0_PLL2CR_SETDS_SET(reg,val) (reg) = ((reg & ~SYS0_PLL2CR_SETDS) | (((val) & 0x1) << 30))
-/* PLL2 Fractional division enable (16) */
-#define SYS0_PLL2CR_FRACTEN (0x1 << 16)
-#define SYS0_PLL2CR_FRACTEN_VAL(val) (((val) & 0x1) << 16)
-#define SYS0_PLL2CR_FRACTEN_GET(val) ((((val) & SYS0_PLL2CR_FRACTEN) >> 16) & 0x1)
-#define SYS0_PLL2CR_FRACTEN_SET(reg,val) (reg) = ((reg & ~SYS0_PLL2CR_FRACTEN) | (((val) & 0x1) << 16))
-/* PLL2 Fractional division value (9:0) */
-#define SYS0_FRACTVAL (0x3f)
-#define SYS0_FRACTVAL_VAL(val) (((val) & 0x3f) << 0)
-#define SYS0_FRACTVAL_GET(val) ((((val) & SYS0_FRACTVAL) >> 0) & 0x3f)
-#define SYS0_FRACTVAL_SET(reg,val) (reg) = ((reg & ~SYS0_FRACTVAL) | (((val) & 0x3f) << 0))
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys1_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys1_reg.h
deleted file mode 100644
index e0c2e84b1a..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys1_reg.h
+++ /dev/null
@@ -1,370 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __SYS1_REG_H
-#define __SYS1_REG_H
-
-#define sys1_r32(reg) ltq_r32(&sys1->reg)
-#define sys1_w32(val, reg) ltq_w32(val, &sys1->reg)
-#define sys1_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &sys1->reg)
-
-/** SYS1 register structure */
-struct svip_reg_sys1 {
- unsigned long clksr; /* 0x0000 */
- unsigned long clkenr; /* 0x0004 */
- unsigned long clkclr; /* 0x0008 */
- unsigned long reserved0[1];
- unsigned long l2ccr; /* 0x0010 */
- unsigned long fpicr; /* 0x0014 */
- unsigned long wdtcr; /* 0x0018 */
- unsigned long reserved1[1];
- unsigned long cpucr[6]; /* 0x0020 */
- unsigned long reserved2[2];
- unsigned long rsr; /* 0x0040 */
- unsigned long rreqr; /* 0x0044 */
- unsigned long rrlsr; /* 0x0048 */
- unsigned long rbtr; /* 0x004c */
- unsigned long irncr; /* 0x0050 */
- unsigned long irnicr; /* 0x0054 */
- unsigned long irnen; /* 0x0058 */
- unsigned long reserved3[1];
- unsigned long cpursr[6]; /* 0x0060 */
- unsigned long reserved4[2];
- unsigned long cpusrssr[6]; /* 0x0080 */
- unsigned long reserved5[2];
- unsigned long cpuwrssr[6]; /* 0x00a0 */
-};
-
-/*******************************************************************************
- * SYS1 Clock Status Register
- ******************************************************************************/
-/* (r) Clock Enable for L2C */
-#define SYS1_CLKSR_L2C (0x1 << 31)
-/* (r) Clock Enable for DDR2 */
-#define SYS1_CLKSR_DDR2 (0x1 << 30)
-/* (r) Clock Enable for SMI2 */
-#define SYS1_CLKSR_SMI2 (0x1 << 29)
-/* (r) Clock Enable for SMI1 */
-#define SYS1_CLKSR_SMI1 (0x1 << 28)
-/* (r) Clock Enable for SMI0 */
-#define SYS1_CLKSR_SMI0 (0x1 << 27)
-/* (r) Clock Enable for FMI0 */
-#define SYS1_CLKSR_FMI0 (0x1 << 26)
-/* (r) Clock Enable for PORT0 */
-#define SYS1_CLKSR_PORT0 (0x1 << 0)
-/* (r) Clock Enable for PCM3 */
-#define SYS1_CLKSR_PCM3 (0x1 << 19)
-/* (r) Clock Enable for PCM2 */
-#define SYS1_CLKSR_PCM2 (0x1 << 18)
-/* (r) Clock Enable for PCM1 */
-#define SYS1_CLKSR_PCM1 (0x1 << 17)
-/* (r) Clock Enable for PCM0 */
-#define SYS1_CLKSR_PCM0 (0x1 << 16)
-/* (r) Clock Enable for ASC1 */
-#define SYS1_CLKSR_ASC1 (0x1 << 15)
-/* (r) Clock Enable for ASC0 */
-#define SYS1_CLKSR_ASC0 (0x1 << 14)
-/* (r) Clock Enable for SSC2 */
-#define SYS1_CLKSR_SSC2 (0x1 << 13)
-/* (r) Clock Enable for SSC1 */
-#define SYS1_CLKSR_SSC1 (0x1 << 12)
-/* (r) Clock Enable for SSC0 */
-#define SYS1_CLKSR_SSC0 (0x1 << 11)
-/* (r) Clock Enable for GPTC */
-#define SYS1_CLKSR_GPTC (0x1 << 10)
-/* (r) Clock Enable for DMA */
-#define SYS1_CLKSR_DMA (0x1 << 9)
-/* (r) Clock Enable for FSCT */
-#define SYS1_CLKSR_FSCT (0x1 << 8)
-/* (r) Clock Enable for ETHSW */
-#define SYS1_CLKSR_ETHSW (0x1 << 7)
-/* (r) Clock Enable for EBU */
-#define SYS1_CLKSR_EBU (0x1 << 6)
-/* (r) Clock Enable for TRNG */
-#define SYS1_CLKSR_TRNG (0x1 << 5)
-/* (r) Clock Enable for DEU */
-#define SYS1_CLKSR_DEU (0x1 << 4)
-/* (r) Clock Enable for PORT3 */
-#define SYS1_CLKSR_PORT3 (0x1 << 3)
-/* (r) Clock Enable for PORT2 */
-#define SYS1_CLKSR_PORT2 (0x1 << 2)
-/* (r) Clock Enable for PORT1 */
-#define SYS1_CLKSR_PORT1 (0x1 << 1)
-
-/*******************************************************************************
- * SYS1 Clock Enable Register
- ******************************************************************************/
-/* (w) Clock Enable Request for L2C */
-#define SYS1_CLKENR_L2C (0x1 << 31)
-/* (w) Clock Enable Request for DDR2 */
-#define SYS1_CLKENR_DDR2 (0x1 << 30)
-/* (w) Clock Enable Request for SMI2 */
-#define SYS1_CLKENR_SMI2 (0x1 << 29)
-/* (w) Clock Enable Request for SMI1 */
-#define SYS1_CLKENR_SMI1 (0x1 << 28)
-/* (w) Clock Enable Request for SMI0 */
-#define SYS1_CLKENR_SMI0 (0x1 << 27)
-/* (w) Clock Enable Request for FMI0 */
-#define SYS1_CLKENR_FMI0 (0x1 << 26)
-/* (w) Clock Enable Request for PORT0 */
-#define SYS1_CLKENR_PORT0 (0x1 << 0)
-/* (w) Clock Enable Request for PCM3 */
-#define SYS1_CLKENR_PCM3 (0x1 << 19)
-/* (w) Clock Enable Request for PCM2 */
-#define SYS1_CLKENR_PCM2 (0x1 << 18)
-/* (w) Clock Enable Request for PCM1 */
-#define SYS1_CLKENR_PCM1 (0x1 << 17)
-/* (w) Clock Enable Request for PCM0 */
-#define SYS1_CLKENR_PCM0 (0x1 << 16)
-/* (w) Clock Enable Request for ASC1 */
-#define SYS1_CLKENR_ASC1 (0x1 << 15)
-/* (w) Clock Enable Request for ASC0 */
-#define SYS1_CLKENR_ASC0 (0x1 << 14)
-/* (w) Clock Enable Request for SSC2 */
-#define SYS1_CLKENR_SSC2 (0x1 << 13)
-/* (w) Clock Enable Request for SSC1 */
-#define SYS1_CLKENR_SSC1 (0x1 << 12)
-/* (w) Clock Enable Request for SSC0 */
-#define SYS1_CLKENR_SSC0 (0x1 << 11)
-/* (w) Clock Enable Request for GPTC */
-#define SYS1_CLKENR_GPTC (0x1 << 10)
-/* (w) Clock Enable Request for DMA */
-#define SYS1_CLKENR_DMA (0x1 << 9)
-/* (w) Clock Enable Request for FSCT */
-#define SYS1_CLKENR_FSCT (0x1 << 8)
-/* (w) Clock Enable Request for ETHSW */
-#define SYS1_CLKENR_ETHSW (0x1 << 7)
-/* (w) Clock Enable Request for EBU */
-#define SYS1_CLKENR_EBU (0x1 << 6)
-/* (w) Clock Enable Request for TRNG */
-#define SYS1_CLKENR_TRNG (0x1 << 5)
-/* (w) Clock Enable Request for DEU */
-#define SYS1_CLKENR_DEU (0x1 << 4)
-/* (w) Clock Enable Request for PORT3 */
-#define SYS1_CLKENR_PORT3 (0x1 << 3)
-/* (w) Clock Enable Request for PORT2 */
-#define SYS1_CLKENR_PORT2 (0x1 << 2)
-/* (w) Clock Enable Request for PORT1 */
-#define SYS1_CLKENR_PORT1 (0x1 << 1)
-
-/*******************************************************************************
- * SYS1 Clock Clear Register
- ******************************************************************************/
-/* (w) Clock Disable Request for L2C */
-#define SYS1_CLKCLR_L2C (0x1 << 31)
-/* (w) Clock Disable Request for DDR2 */
-#define SYS1_CLKCLR_DDR2 (0x1 << 30)
-/* (w) Clock Disable Request for SMI2 */
-#define SYS1_CLKCLR_SMI2 (0x1 << 29)
-/* (w) Clock Disable Request for SMI1 */
-#define SYS1_CLKCLR_SMI1 (0x1 << 28)
-/* (w) Clock Disable Request for SMI0 */
-#define SYS1_CLKCLR_SMI0 (0x1 << 27)
-/* (w) Clock Disable Request for FMI0 */
-#define SYS1_CLKCLR_FMI0 (0x1 << 26)
-/* (w) Clock Disable Request for PORT0 */
-#define SYS1_CLKCLR_PORT0 (0x1 << 0)
-/* (w) Clock Disable Request for PCM3 */
-#define SYS1_CLKCLR_PCM3 (0x1 << 19)
-/* (w) Clock Disable Request for PCM2 */
-#define SYS1_CLKCLR_PCM2 (0x1 << 18)
-/* (w) Clock Disable Request for PCM1 */
-#define SYS1_CLKCLR_PCM1 (0x1 << 17)
-/* (w) Clock Disable Request for PCM0 */
-#define SYS1_CLKCLR_PCM0 (0x1 << 16)
-/* (w) Clock Disable Request for ASC1 */
-#define SYS1_CLKCLR_ASC1 (0x1 << 15)
-/* (w) Clock Disable Request for ASC0 */
-#define SYS1_CLKCLR_ASC0 (0x1 << 14)
-/* (w) Clock Disable Request for SSC2 */
-#define SYS1_CLKCLR_SSC2 (0x1 << 13)
-/* (w) Clock Disable Request for SSC1 */
-#define SYS1_CLKCLR_SSC1 (0x1 << 12)
-/* (w) Clock Disable Request for SSC0 */
-#define SYS1_CLKCLR_SSC0 (0x1 << 11)
-/* (w) Clock Disable Request for GPTC */
-#define SYS1_CLKCLR_GPTC (0x1 << 10)
-/* (w) Clock Disable Request for DMA */
-#define SYS1_CLKCLR_DMA (0x1 << 9)
-/* (w) Clock Disable Request for FSCT */
-#define SYS1_CLKCLR_FSCT (0x1 << 8)
-/* (w) Clock Disable Request for ETHSW */
-#define SYS1_CLKCLR_ETHSW (0x1 << 7)
-/* (w) Clock Disable Request for EBU */
-#define SYS1_CLKCLR_EBU (0x1 << 6)
-/* (w) Clock Disable Request for TRNG */
-#define SYS1_CLKCLR_TRNG (0x1 << 5)
-/* (w) Clock Disable Request for DEU */
-#define SYS1_CLKCLR_DEU (0x1 << 4)
-/* (w) Clock Disable Request for PORT3 */
-#define SYS1_CLKCLR_PORT3 (0x1 << 3)
-/* (w) Clock Disable Request for PORT2 */
-#define SYS1_CLKCLR_PORT2 (0x1 << 2)
-/* (w) Clock Disable Request for PORT1 */
-#define SYS1_CLKCLR_PORT1 (0x1 << 1)
-
-/*******************************************************************************
- * SYS1 FPI Control Register
- ******************************************************************************/
-
-/* FPI Bus Clock divider (0) */
-#define SYS1_FPICR_FPIDIV (0x1)
-#define SYS1_FPICR_FPIDIV_VAL(val) (((val) & 0x1) << 0)
-#define SYS1_FPICR_FPIDIV_GET(val) ((((val) & SYS1_FPICR_FPIDIV) >> 0) & 0x1)
-#define SYS1_FPICR_FPIDIV_SET(reg,val) (reg) = ((reg & ~SYS1_FPICR_FPIDIV) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * SYS1 Clock Control Register for CPUn
- ******************************************************************************/
-
-/* Enable bit for clock of CPUn (1) */
-#define SYS1_CPUCR_CPUCLKEN (0x1 << 1)
-#define SYS1_CPUCR_CPUCLKEN_VAL(val) (((val) & 0x1) << 1)
-#define SYS1_CPUCR_CPUCLKEN_GET(val) ((((val) & SYS1_CPUCR_CPUCLKEN) >> 1) & 0x1)
-#define SYS1_CPUCR_CPUCLKEN_SET(reg,val) (reg) = ((reg & ~SYS1_CPUCR_CPUCLKEN) | (((val) & 0x1) << 1))
-/* Divider factor for clock of CPUn (0) */
-#define SYS1_CPUCR_CPUDIV (0x1)
-#define SYS1_CPUCR_CPUDIV_VAL(val) (((val) & 0x1) << 0)
-#define SYS1_CPUCR_CPUDIV_GET(val) ((((val) & SYS1_CPUCR_CPUDIV) >> 0) & 0x1)
-#define SYS1_CPUCR_CPUDIV_SET(reg,val) (reg) = ((reg & ~SYS1_CPUCR_CPUDIV) | (((val) & 0x1) << 0))
-
-/*******************************************************************************
- * SYS1 Reset Request Register
- ******************************************************************************/
-
-/* HRSTOUT Reset Request (18) */
-#define SYS1_RREQ_HRSTOUT (0x1 << 18)
-#define SYS1_RREQ_HRSTOUT_VAL(val) (((val) & 0x1) << 18)
-#define SYS1_RREQ_HRSTOUT_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_HRSTOUT) | (((val) & 1) << 18))
- /* FBS0 Reset Request (17) */
-#define SYS1_RREQ_FBS0 (0x1 << 17)
-#define SYS1_RREQ_FBS0_VAL(val) (((val) & 0x1) << 17)
-#define SYS1_RREQ_FBS0_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_FBS0) | (((val) & 1) << 17))
- /* SUBSYS Reset Request (16) */
-#define SYS1_RREQ_SUBSYS (0x1 << 16)
-#define SYS1_RREQ_SUBSYS_VAL(val) (((val) & 0x1) << 16)
-#define SYS1_RREQ_SUBSYS_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_SUBSYS) | (((val) & 1) << 16))
- /* Watchdog5 Reset Request (13) */
-#define SYS1_RREQ_WDT5 (0x1 << 13)
-#define SYS1_RREQ_WDT5_VAL(val) (((val) & 0x1) << 13)
-#define SYS1_RREQ_WDT5_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT5) | (((val) & 1) << 13))
- /* Watchdog4 Reset Request (12) */
-#define SYS1_RREQ_WDT4 (0x1 << 12)
-#define SYS1_RREQ_WDT4_VAL(val) (((val) & 0x1) << 12)
-#define SYS1_RREQ_WDT4_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT4) | (((val) & 1) << 12))
- /* Watchdog3 Reset Request (11) */
-#define SYS1_RREQ_WDT3 (0x1 << 11)
-#define SYS1_RREQ_WDT3_VAL(val) (((val) & 0x1) << 11)
-#define SYS1_RREQ_WDT3_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT3) | (((val) & 1) << 11))
- /* Watchdog2 Reset Request (10) */
-#define SYS1_RREQ_WDT2 (0x1 << 10)
-#define SYS1_RREQ_WDT2_VAL(val) (((val) & 0x1) << 10)
-#define SYS1_RREQ_WDT2_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT2) | (((val) & 1) << 10))
- /* Watchdog1 Reset Request (9) */
-#define SYS1_RREQ_WDT1 (0x1 << 9)
-#define SYS1_RREQ_WDT1_VAL(val) (((val) & 0x1) << 9)
-#define SYS1_RREQ_WDT1_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT1) | (((val) & 1) << 9))
- /* Watchdog0 Reset Request (8) */
-#define SYS1_RREQ_WDT0 (0x1 << 8)
-#define SYS1_RREQ_WDT0_VAL(val) (((val) & 0x1) << 8)
-#define SYS1_RREQ_WDT0_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT0) | (((val) & 1) << 8))
- /* CPU5 Reset Request (5) */
-#define SYS1_RREQ_CPU5 (0x1 << 5)
-#define SYS1_RREQ_CPU5_VAL(val) (((val) & 0x1) << 5)
-#define SYS1_RREQ_CPU5_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU5) | (((val) & 1) << 5))
- /* CPU4 Reset Request (4) */
-#define SYS1_RREQ_CPU4 (0x1 << 4)
-#define SYS1_RREQ_CPU4_VAL(val) (((val) & 0x1) << 4)
-#define SYS1_RREQ_CPU4_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU4) | (((val) & 1) << 4))
- /* CPU3 Reset Request (3) */
-#define SYS1_RREQ_CPU3 (0x1 << 3)
-#define SYS1_RREQ_CPU3_VAL(val) (((val) & 0x1) << 3)
-#define SYS1_RREQ_CPU3_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU3) | (((val) & 1) << 3))
- /* CPU2 Reset Request (2) */
-#define SYS1_RREQ_CPU2 (0x1 << 2)
-#define SYS1_RREQ_CPU2_VAL(val) (((val) & 0x1) << 2)
-#define SYS1_RREQ_CPU2_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU2) | (((val) & 1) << 2))
- /* CPU1 Reset Request (1) */
-#define SYS1_RREQ_CPU1 (0x1 << 1)
-#define SYS1_RREQ_CPU1_VAL(val) (((val) & 0x1) << 1)
-#define SYS1_RREQ_CPU1_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU1) | (((val) & 1) << 1))
-/* CPU0 Reset Request (0) */
-#define SYS1_RREQ_CPU0 (0x1)
-#define SYS1_RREQ_CPU0_VAL(val) (((val) & 0x1) << 0)
-#define SYS1_RREQ_CPU0_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU0) | (((val) & 1) << 0))
-
-/*******************************************************************************
- * SYS1 Reset Release Register
- ******************************************************************************/
-
-/* HRSTOUT Reset Release (18) */
-#define SYS1_RRLSR_HRSTOUT (0x1 << 18)
-#define SYS1_RRLSR_HRSTOUT_VAL(val) (((val) & 0x1) << 18)
-#define SYS1_RRLSR_HRSTOUT_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_HRSTOUT) | (((val) & 1) << 18))
-/* FBS0 Reset Release (17) */
-#define SYS1_RRLSR_FBS0 (0x1 << 17)
-#define SYS1_RRLSR_FBS0_VAL(val) (((val) & 0x1) << 17)
-#define SYS1_RRLSR_FBS0_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_FBS0) | (((val) & 1) << 17))
-/* SUBSYS Reset Release (16) */
-#define SYS1_RRLSR_SUBSYS (0x1 << 16)
-#define SYS1_RRLSR_SUBSYS_VAL(val) (((val) & 0x1) << 16)
-#define SYS1_RRLSR_SUBSYS_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_SUBSYS) | (((val) & 1) << 16))
-/* Watchdog5 Reset Release (13) */
-#define SYS1_RRLSR_WDT5 (0x1 << 13)
-#define SYS1_RRLSR_WDT5_VAL(val) (((val) & 0x1) << 13)
-#define SYS1_RRLSR_WDT5_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT5) | (((val) & 1) << 13))
-/* Watchdog4 Reset Release (12) */
-#define SYS1_RRLSR_WDT4 (0x1 << 12)
-#define SYS1_RRLSR_WDT4_VAL(val) (((val) & 0x1) << 12)
-#define SYS1_RRLSR_WDT4_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT4) | (((val) & 1) << 12))
-/* Watchdog3 Reset Release (11) */
-#define SYS1_RRLSR_WDT3 (0x1 << 11)
-#define SYS1_RRLSR_WDT3_VAL(val) (((val) & 0x1) << 11)
-#define SYS1_RRLSR_WDT3_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT3) | (((val) & 1) << 11))
-/* Watchdog2 Reset Release (10) */
-#define SYS1_RRLSR_WDT2 (0x1 << 10)
-#define SYS1_RRLSR_WDT2_VAL(val) (((val) & 0x1) << 10)
-#define SYS1_RRLSR_WDT2_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT2) | (((val) & 1) << 10))
-/* Watchdog1 Reset Release (9) */
-#define SYS1_RRLSR_WDT1 (0x1 << 9)
-#define SYS1_RRLSR_WDT1_VAL(val) (((val) & 0x1) << 9)
-#define SYS1_RRLSR_WDT1_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT1) | (((val) & 1) << 9))
-/* Watchdog0 Reset Release (8) */
-#define SYS1_RRLSR_WDT0 (0x1 << 8)
-#define SYS1_RRLSR_WDT0_VAL(val) (((val) & 0x1) << 8)
-#define SYS1_RRLSR_WDT0_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT0) | (((val) & 1) << 8))
-/* CPU5 Reset Release (5) */
-#define SYS1_RRLSR_CPU5 (0x1 << 5)
-#define SYS1_RRLSR_CPU5_VAL(val) (((val) & 0x1) << 5)
-#define SYS1_RRLSR_CPU5_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU5) | (((val) & 1) << 5))
-/* CPU4 Reset Release (4) */
-#define SYS1_RRLSR_CPU4 (0x1 << 4)
-#define SYS1_RRLSR_CPU4_VAL(val) (((val) & 0x1) << 4)
-#define SYS1_RRLSR_CPU4_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU4) | (((val) & 1) << 4))
-/* CPU3 Reset Release (3) */
-#define SYS1_RRLSR_CPU3 (0x1 << 3)
-#define SYS1_RRLSR_CPU3_VAL(val) (((val) & 0x1) << 3)
-#define SYS1_RRLSR_CPU3_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU3) | (((val) & 1) << 3))
-/* CPU2 Reset Release (2) */
-#define SYS1_RRLSR_CPU2 (0x1 << 2)
-#define SYS1_RRLSR_CPU2_VAL(val) (((val) & 0x1) << 2)
-#define SYS1_RRLSR_CPU2_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU2) | (((val) & 1) << 2))
-/* CPU1 Reset Release (1) */
-#define SYS1_RRLSR_CPU1 (0x1 << 1)
-#define SYS1_RRLSR_CPU1_VAL(val) (((val) & 0x1) << 1)
-#define SYS1_RRLSR_CPU1_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU1) | (((val) & 1) << 1))
-/* CPU0 Reset Release (0) */
-#define SYS1_RRLSR_CPU0 (0x1)
-#define SYS1_RRLSR_CPU0_VAL(val) (((val) & 0x1) << 0)
-#define SYS1_RRLSR_CPU0_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU0) | (((val) & 1) << 0))
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys2_reg.h b/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys2_reg.h
deleted file mode 100644
index ff9f04b4d7..0000000000
--- a/target/linux/lantiq/files/arch/mips/include/asm/mach-lantiq/svip/sys2_reg.h
+++ /dev/null
@@ -1,494 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- St. Martin Strasse 53; 81669 Munich, Germany
-
- Any use of this Software is subject to the conclusion of a respective
- License Agreement. Without such a License Agreement no rights to the
- Software are granted.
-
- ******************************************************************************/
-
-#ifndef __SYS2_REG_H
-#define __SYS2_REG_H
-
-#define sys2_r32(reg) ltq_r32(&sys2->reg)
-#define sys2_w32(val, reg) ltq_w32(val, &sys2->reg)
-#define sys2_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &sys2->reg)
-
-/** SYS2 register structure */
-struct svip_reg_sys2 {
- volatile unsigned long clksr; /* 0x0000 */
- volatile unsigned long clkenr; /* 0x0004 */
- volatile unsigned long clkclr; /* 0x0008 */
- volatile unsigned long reserved0[1];
- volatile unsigned long rsr; /* 0x0010 */
- volatile unsigned long rreqr; /* 0x0014 */
- volatile unsigned long rrlsr; /* 0x0018 */
-};
-
-/*******************************************************************************
- * SYS2 Clock Status Register
- ******************************************************************************/
-
-/* Clock Enable for PORT4 */
-#define SYS2_CLKSR_PORT4 (0x1 << 27)
-#define SYS2_CLKSR_PORT4_VAL(val) (((val) & 0x1) << 27)
-#define SYS2_CLKSR_PORT4_GET(val) (((val) & SYS2_CLKSR_PORT4) >> 27)
-/* Clock Enable for HWSYNC */
-#define SYS2_CLKSR_HWSYNC (0x1 << 26)
-#define SYS2_CLKSR_HWSYNC_VAL(val) (((val) &
-#define SYS2_CLKSR_HWSYNC_GET(val) (((val) & SYS2_CLKSR_HWSYNC) >> 26)
- /* Clock Enable for MBS */
-#define SYS2_CLKSR_MBS (0x1 << 25)
-#define SYS2_CLKSR_MBS_VAL(val) (((val) & 0x1) << 25)
-#define SYS2_CLKSR_MBS_GET(val) (((val) & SYS2_CLKSR_MBS) >> 25)
- /* Clock Enable for SWINT */
-#define SYS2_CLKSR_SWINT (0x1 << 24)
-#define SYS2_CLKSR_SWINT_VAL(val) (((val) & 0x1) << 24)
-#define SYS2_CLKSR_SWINT_GET(val) (((val) & SYS2_CLKSR_SWINT) >> 24)
- /* Clock Enable for HWACC3 */
-#define SYS2_CLKSR_HWACC3 (0x1 << 19)
-#define SYS2_CLKSR_HWACC3_VAL(val) (((val) &
-#define SYS2_CLKSR_HWACC3_GET(val) (((val) & SYS2_CLKSR_HWACC3) >> 19)
- /* Clock Enable for HWACC2 */
-#define SYS2_CLKSR_HWACC2 (0x1 << 18)
-#define SYS2_CLKSR_HWACC2_VAL(val) (((val) &
-#define SYS2_CLKSR_HWACC2_GET(val) (((val) & SYS2_CLKSR_HWACC2) >> 18)
- /* Clock Enable for HWACC1 */
-#define SYS2_CLKSR_HWACC1 (0x1 << 17)
-#define SYS2_CLKSR_HWACC1_VAL(val) (((val) &
-#define SYS2_CLKSR_HWACC1_GET(val) (((val) & SYS2_CLKSR_HWACC1) >> 17)
- /* Clock Enable for HWACC0 */
-#define SYS2_CLKSR_HWACC0 (0x1 << 16)
-#define SYS2_CLKSR_HWACC0_VAL(val) (((val) &
-#define SYS2_CLKSR_HWACC0_GET(val) (((val) & SYS2_CLKSR_HWACC0) >> 16)
- /* Clock Enable for SIF7 */
-#define SYS2_CLKSR_SIF7 (0x1 << 15)
-#define SYS2_CLKSR_SIF7_VAL(val) (((val) & 0x1) << 15)
-#define SYS2_CLKSR_SIF7_GET(val) (((val) & SYS2_CLKSR_SIF7) >> 15)
- /* Clock Enable for SIF6 */
-#define SYS2_CLKSR_SIF6 (0x1 << 14)
-#define SYS2_CLKSR_SIF6_VAL(val) (((val) & 0x1) << 14)
-#define SYS2_CLKSR_SIF6_GET(val) (((val) & SYS2_CLKSR_SIF6) >> 14)
- /* Clock Enable for SIF5 */
-#define SYS2_CLKSR_SIF5 (0x1 << 13)
-#define SYS2_CLKSR_SIF5_VAL(val) (((val) & 0x1) << 13)
-#define SYS2_CLKSR_SIF5_GET(val) (((val) & SYS2_CLKSR_SIF5) >> 13)
- /* Clock Enable for SIF4 */
-#define SYS2_CLKSR_SIF4 (0x1 << 12)
-#define SYS2_CLKSR_SIF4_VAL(val) (((val) & 0x1) << 12)
-#define SYS2_CLKSR_SIF4_GET(val) (((val) & SYS2_CLKSR_SIF4) >> 12)
- /* Clock Enable for SIF3 */
-#define SYS2_CLKSR_SIF3 (0x1 << 11)
-#define SYS2_CLKSR_SIF3_VAL(val) (((val) & 0x1) << 11)
-#define SYS2_CLKSR_SIF3_GET(val) (((val) & SYS2_CLKSR_SIF3) >> 11)
-/* Clock Enable for SIF2 */
-#define SYS2_CLKSR_SIF2 (0x1 << 10)
-#define SYS2_CLKSR_SIF2_VAL(val) (((val) & 0x1) << 10)
-#define SYS2_CLKSR_SIF2_GET(val) (((val) & SYS2_CLKSR_SIF2) >> 10)
-/* Clock Enable for SIF1 */
-#define SYS2_CLKSR_SIF1 (0x1 << 9)
-#define SYS2_CLKSR_SIF1_VAL(val) (((val) & 0x1) << 9)
-#define SYS2_CLKSR_SIF1_GET(val) (((val) & SYS2_CLKSR_SIF1) >> 9)
-/* Clock Enable for SIF0 */
-#define SYS2_CLKSR_SIF0 (0x1 << 8)
-#define SYS2_CLKSR_SIF0_VAL(val) (((val) & 0x1) << 8)
-#define SYS2_CLKSR_SIF0_GET(val) (((val) & SYS2_CLKSR_SIF0) >> 8)
-/* Clock Enable for DFEV7 */
-#define SYS2_CLKSR_DFEV7 (0x1 << 7)
-#define SYS2_CLKSR_DFEV7_VAL(val) (((val) & 0x1) << 7)
-#define SYS2_CLKSR_DFEV7_GET(val) (((val) & SYS2_CLKSR_DFEV7) >> 7)
-/* Clock Enable for DFEV6 */
-#define SYS2_CLKSR_DFEV6 (0x1 << 6)
-#define SYS2_CLKSR_DFEV6_VAL(val) (((val) & 0x1) << 6)
-#define SYS2_CLKSR_DFEV6_GET(val) (((val) & SYS2_CLKSR_DFEV6) >> 6)
-/* Clock Enable for DFEV5 */
-#define SYS2_CLKSR_DFEV5 (0x1 << 5)
-#define SYS2_CLKSR_DFEV5_VAL(val) (((val) & 0x1) << 5)
-#define SYS2_CLKSR_DFEV5_GET(val) (((val) & SYS2_CLKSR_DFEV5) >> 5)
-/* Clock Enable for DFEV4 */
-#define SYS2_CLKSR_DFEV4 (0x1 << 4)
-#define SYS2_CLKSR_DFEV4_VAL(val) (((val) & 0x1) << 4)
-#define SYS2_CLKSR_DFEV4_GET(val) (((val) & SYS2_CLKSR_DFEV4) >> 4)
-/* Clock Enable for DFEV3 */
-#define SYS2_CLKSR_DFEV3 (0x1 << 3)
-#define SYS2_CLKSR_DFEV3_VAL(val) (((val) & 0x1) << 3)
-#define SYS2_CLKSR_DFEV3_GET(val) (((val) & SYS2_CLKSR_DFEV3) >> 3)
-/* Clock Enable for DFEV2 */
-#define SYS2_CLKSR_DFEV2 (0x1 << 2)
-#define SYS2_CLKSR_DFEV2_VAL(val) (((val) & 0x1) << 2)
-#define SYS2_CLKSR_DFEV2_GET(val) (((val) & SYS2_CLKSR_DFEV2) >> 2)
-/* Clock Enable for DFEV1 */
-#define SYS2_CLKSR_DFEV1 (0x1 << 1)
-#define SYS2_CLKSR_DFEV1_VAL(val) (((val) & 0x1) << 1)
-#define SYS2_CLKSR_DFEV1_GET(val) (((val) & SYS2_CLKSR_DFEV1) >> 1)
-/* Clock Enable for DFEV0 */
-#define SYS2_CLKSR_DFEV0 (0x1)
-#define SYS2_CLKSR_DFEV0_VAL(val) (((val) & 0x1))
-#define SYS2_CLKSR_DFEV0_GET(val) ((val) & SYS2_CLKSR_DFEV0)
-
-/*******************************************************************************
- * SYS2 Clock Enable Register
- ******************************************************************************/
-
-/* Clock Enable Request for PORT4 */
-#define SYS2_CLKENR_PORT4 (0x1 << 27)
-#define SYS2_CLKENR_PORT4_VAL(val) (((val) & 0x1) << 27)
-#define SYS2_CLKENR_PORT4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_PORT4) | ((val & 0x1) << 27))
-/* Clock Enable Request for HWSYNC */
-#define SYS2_CLKENR_HWSYNC (0x1 << 26)
-#define SYS2_CLKENR_HWSYNC_VAL(val) (((val) & 0x1) << 26)
-#define SYS2_CLKENR_HWSYNC_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWSYNC) | ((val & 0x1) << 26))
-/* Clock Enable Request for MBS */
-#define SYS2_CLKENR_MBS (0x1 << 25)
-#define SYS2_CLKENR_MBS_VAL(val) (((val) & 0x1) << 25)
-#define SYS2_CLKENR_MBS_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_MBS) | ((val & 0x1) << 25))
-/* Clock Enable Request for SWINT */
-#define SYS2_CLKENR_SWINT (0x1 << 24)
-#define SYS2_CLKENR_SWINT_VAL(val) (((val) & 0x1) << 24)
-#define SYS2_CLKENR_SWINT_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SWINT) | ((val & 0x1) << 24))
-/* Clock Enable Request for HWACC3 */
-#define SYS2_CLKENR_HWACC3 (0x1 << 19)
-#define SYS2_CLKENR_HWACC3_VAL(val) (((val) & 0x1) << 19)
-#define SYS2_CLKENR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC3) | ((val & 0x1) << 19))
-/* Clock Enable Request for HWACC2 */
-#define SYS2_CLKENR_HWACC2 (0x1 << 18)
-#define SYS2_CLKENR_HWACC2_VAL(val) (((val) & 0x1) << 18)
-#define SYS2_CLKENR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC2) | ((val & 0x1) << 18))
-/* Clock Enable Request for HWACC1 */
-#define SYS2_CLKENR_HWACC1 (0x1 << 17)
-#define SYS2_CLKENR_HWACC1_VAL(val) (((val) & 0x1) << 17)
-#define SYS2_CLKENR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC1) | ((val & 0x1) << 17))
-/* Clock Enable Request for HWACC0 */
-#define SYS2_CLKENR_HWACC0 (0x1 << 16)
-#define SYS2_CLKENR_HWACC0_VAL(val) (((val) & 0x1) << 16)
-#define SYS2_CLKENR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC0) | ((val & 0x1) << 16))
-/* Clock Enable Request for SIF7 */
-#define SYS2_CLKENR_SIF7 (0x1 << 15)
-#define SYS2_CLKENR_SIF7_VAL(val) (((val) & 0x1) << 15)
-#define SYS2_CLKENR_SIF7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF7) | ((val & 0x1) << 15))
-/* Clock Enable Request for SIF6 */
-#define SYS2_CLKENR_SIF6 (0x1 << 14)
-#define SYS2_CLKENR_SIF6_VAL(val) (((val) & 0x1) << 14)
-#define SYS2_CLKENR_SIF6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF6) | ((val & 0x1) << 14))
-/* Clock Enable Request for SIF5 */
-#define SYS2_CLKENR_SIF5 (0x1 << 13)
-#define SYS2_CLKENR_SIF5_VAL(val) (((val) & 0x1) << 13)
-#define SYS2_CLKENR_SIF5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF5) | ((val & 0x1) << 13))
-/* Clock Enable Request for SIF4 */
-#define SYS2_CLKENR_SIF4 (0x1 << 12)
-#define SYS2_CLKENR_SIF4_VAL(val) (((val) & 0x1) << 12)
-#define SYS2_CLKENR_SIF4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF4) | ((val & 0x1) << 12))
-/* Clock Enable Request for SIF3 */
-#define SYS2_CLKENR_SIF3 (0x1 << 11)
-#define SYS2_CLKENR_SIF3_VAL(val) (((val) & 0x1) << 11)
-#define SYS2_CLKENR_SIF3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF3) | ((val & 0x1) << 11))
-/* Clock Enable Request for SIF2 */
-#define SYS2_CLKENR_SIF2 (0x1 << 10)
-#define SYS2_CLKENR_SIF2_VAL(val) (((val) & 0x1) << 10)
-#define SYS2_CLKENR_SIF2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF2) | ((val & 0x1) << 10))
-/* Clock Enable Request for SIF1 */
-#define SYS2_CLKENR_SIF1 (0x1 << 9)
-#define SYS2_CLKENR_SIF1_VAL(val) (((val) & 0x1) << 9)
-#define SYS2_CLKENR_SIF1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF1) | ((val & 0x1) << 9))
-/* Clock Enable Request for SIF0 */
-#define SYS2_CLKENR_SIF0 (0x1 << 8)
-#define SYS2_CLKENR_SIF0_VAL(val) (((val) & 0x1) << 8)
-#define SYS2_CLKENR_SIF0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF0) | ((val & 0x1) << 8))
-/* Clock Enable Request for DFEV7 */
-#define SYS2_CLKENR_DFEV7 (0x1 << 7)
-#define SYS2_CLKENR_DFEV7_VAL(val) (((val) & 0x1) << 7)
-#define SYS2_CLKENR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV7) | ((val & 0x1) << 7))
-/* Clock Enable Request for DFEV6 */
-#define SYS2_CLKENR_DFEV6 (0x1 << 6)
-#define SYS2_CLKENR_DFEV6_VAL(val) (((val) & 0x1) << 6)
-#define SYS2_CLKENR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV6) | ((val & 0x1) << 6))
-/* Clock Enable Request for DFEV5 */
-#define SYS2_CLKENR_DFEV5 (0x1 << 5)
-#define SYS2_CLKENR_DFEV5_VAL(val) (((val) & 0x1) << 5)
-#define SYS2_CLKENR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV5) | ((val & 0x1) << 5))
-/* Clock Enable Request for DFEV4 */
-#define SYS2_CLKENR_DFEV4 (0x1 << 4)
-#define SYS2_CLKENR_DFEV4_VAL(val) (((val) & 0x1) << 4)
-#define SYS2_CLKENR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV4) | ((val & 0x1) << 4))
-/* Clock Enable Request for DFEV3 */
-#define SYS2_CLKENR_DFEV3 (0x1 << 3)
-#define SYS2_CLKENR_DFEV3_VAL(val) (((val) & 0x1) << 3)
-#define SYS2_CLKENR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV3) | ((val & 0x1) << 3))
-/* Clock Enable Request for DFEV2 */
-#define SYS2_CLKENR_DFEV2 (0x1 << 2)
-#define SYS2_CLKENR_DFEV2_VAL(val) (((val) & 0x1) << 2)
-#define SYS2_CLKENR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV2) | ((val & 0x1) << 2))
-/* Clock Enable Request for DFEV1 */
-#define SYS2_CLKENR_DFEV1 (0x1 << 1)
-#define SYS2_CLKENR_DFEV1_VAL(val) (((val) & 0x1) << 1)
-#define SYS2_CLKENR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV1) | ((val & 0x1) << 1))
-/* Clock Enable Request for DFEV0 */
-#define SYS2_CLKENR_DFEV0 (0x1)
-#define SYS2_CLKENR_DFEV0_VAL(val) (((val) & 0x1))
-#define SYS2_CLKENR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV0) | ((val & 0x1)))
-
-/*******************************************************************************
- * SYS2 Clock Clear Register
- ******************************************************************************/
-
-/* Clock Disable Request for PORT4 */
-#define SYS2_CLKCLR_PORT4 (0x1 << 27)
-#define SYS2_CLKCLR_PORT4_VAL(val) (((val) & 0x1) << 27)
-#define SYS2_CLKCLR_PORT4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_PORT4) | ((val & 0x1) << 27))
-/* Clock Disable Request for HWSYNC */
-#define SYS2_CLKCLR_HWSYNC (0x1 << 26)
-#define SYS2_CLKCLR_HWSYNC_VAL(val) (((val) & 0x1) << 26)
-#define SYS2_CLKCLR_HWSYNC_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWSYNC) | ((val & 0x1) << 26))
-/* Clock Disable Request for MBS */
-#define SYS2_CLKCLR_MBS (0x1 << 25)
-#define SYS2_CLKCLR_MBS_VAL(val) (((val) & 0x1) << 25)
-#define SYS2_CLKCLR_MBS_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_MBS) | ((val & 0x1) << 25))
-/* Clock Disable Request for SWINT */
-#define SYS2_CLKCLR_SWINT (0x1 << 24)
-#define SYS2_CLKCLR_SWINT_VAL(val) (((val) & 0x1) << 24)
-#define SYS2_CLKCLR_SWINT_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SWINT) | ((val & 0x1) << 24))
-/* Clock Disable Request for HWACC3 */
-#define SYS2_CLKCLR_HWACC3 (0x1 << 19)
-#define SYS2_CLKCLR_HWACC3_VAL(val) (((val) & 0x1) << 19)
-#define SYS2_CLKCLR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC3) | ((val & 0x1) << 19))
-/* Clock Disable Request for HWACC2 */
-#define SYS2_CLKCLR_HWACC2 (0x1 << 18)
-#define SYS2_CLKCLR_HWACC2_VAL(val) (((val) & 0x1) << 18)
-#define SYS2_CLKCLR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC2) | ((val & 0x1) << 18))
-/* Clock Disable Request for HWACC1 */
-#define SYS2_CLKCLR_HWACC1 (0x1 << 17)
-#define SYS2_CLKCLR_HWACC1_VAL(val) (((val) & 0x1) << 17)
-#define SYS2_CLKCLR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC1) | ((val & 0x1) << 17))
-/* Clock Disable Request for HWACC0 */
-#define SYS2_CLKCLR_HWACC0 (0x1 << 16)
-#define SYS2_CLKCLR_HWACC0_VAL(val) (((val) & 0x1) << 16)
-#define SYS2_CLKCLR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC0) | ((val & 0x1) << 16))
-/* Clock Disable Request for SIF7 */
-#define SYS2_CLKCLR_SIF7 (0x1 << 15)
-#define SYS2_CLKCLR_SIF7_VAL(val) (((val) & 0x1) << 15)
-#define SYS2_CLKCLR_SIF7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF7) | ((val & 0x1) << 15))
-/* Clock Disable Request for SIF6 */
-#define SYS2_CLKCLR_SIF6 (0x1 << 14)
-#define SYS2_CLKCLR_SIF6_VAL(val) (((val) & 0x1) << 14)
-#define SYS2_CLKCLR_SIF6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF6) | ((val & 0x1) << 14))
-/* Clock Disable Request for SIF5 */
-#define SYS2_CLKCLR_SIF5 (0x1 << 13)
-#define SYS2_CLKCLR_SIF5_VAL(val) (((val) & 0x1) << 13)
-#define SYS2_CLKCLR_SIF5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF5) | ((val & 0x1) << 13))
-/* Clock Disable Request for SIF4 */
-#define SYS2_CLKCLR_SIF4 (0x1 << 12)
-#define SYS2_CLKCLR_SIF4_VAL(val) (((val) & 0x1) << 12)
-#define SYS2_CLKCLR_SIF4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF4) | ((val & 0x1) << 12))
-/* Clock Disable Request for SIF3 */
-#define SYS2_CLKCLR_SIF3 (0x1 << 11)
-#define SYS2_CLKCLR_SIF3_VAL(val) (((val) & 0x1) << 11)
-#define SYS2_CLKCLR_SIF3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF3) | ((val & 0x1) << 11))
-/* Clock Disable Request for SIF2 */
-#define SYS2_CLKCLR_SIF2 (0x1 << 10)
-#define SYS2_CLKCLR_SIF2_VAL(val) (((val) & 0x1) << 10)
-#define SYS2_CLKCLR_SIF2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF2) | ((val & 0x1) << 10))
-/* Clock Disable Request for SIF1 */
-#define SYS2_CLKCLR_SIF1 (0x1 << 9)
-#define SYS2_CLKCLR_SIF1_VAL(val) (((val) & 0x1) << 9)
-#define SYS2_CLKCLR_SIF1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF1) | ((val & 0x1) << 9))
-/* Clock Disable Request for SIF0 */
-#define SYS2_CLKCLR_SIF0 (0x1 << 8)
-#define SYS2_CLKCLR_SIF0_VAL(val) (((val) & 0x1) << 8)
-#define SYS2_CLKCLR_SIF0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF0) | ((val & 0x1) << 8))
-/* Clock Disable Request for DFEV7 */
-#define SYS2_CLKCLR_DFEV7 (0x1 << 7)
-#define SYS2_CLKCLR_DFEV7_VAL(val) (((val) & 0x1) << 7)
-#define SYS2_CLKCLR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV7) | ((val & 0x1) << 7))
-/* Clock Disable Request for DFEV6 */
-#define SYS2_CLKCLR_DFEV6 (0x1 << 6)
-#define SYS2_CLKCLR_DFEV6_VAL(val) (((val) & 0x1) << 6)
-#define SYS2_CLKCLR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV6) | ((val & 0x1) << 6))
-/* Clock Disable Request for DFEV5 */
-#define SYS2_CLKCLR_DFEV5 (0x1 << 5)
-#define SYS2_CLKCLR_DFEV5_VAL(val) (((val) & 0x1) << 5)
-#define SYS2_CLKCLR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV5) | ((val & 0x1) << 5))
-/* Clock Disable Request for DFEV4 */
-#define SYS2_CLKCLR_DFEV4 (0x1 << 4)
-#define SYS2_CLKCLR_DFEV4_VAL(val) (((val) & 0x1) << 4)
-#define SYS2_CLKCLR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV4) | ((val & 0x1) << 4))
-/* Clock Disable Request for DFEV3 */
-#define SYS2_CLKCLR_DFEV3 (0x1 << 3)
-#define SYS2_CLKCLR_DFEV3_VAL(val) (((val) & 0x1) << 3)
-#define SYS2_CLKCLR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV3) | ((val & 0x1) << 3))
-/* Clock Disable Request for DFEV2 */
-#define SYS2_CLKCLR_DFEV2 (0x1 << 2)
-#define SYS2_CLKCLR_DFEV2_VAL(val) (((val) & 0x1) << 2)
-#define SYS2_CLKCLR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV2) | ((val & 0x1) << 2))
-/* Clock Disable Request for DFEV1 */
-#define SYS2_CLKCLR_DFEV1 (0x1 << 1)
-#define SYS2_CLKCLR_DFEV1_VAL(val) (((val) & 0x1) << 1)
-#define SYS2_CLKCLR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV1) | ((val & 0x1) << 1))
-/* Clock Disable Request for DFEV0 */
-#define SYS2_CLKCLR_DFEV0 (0x1)
-#define SYS2_CLKCLR_DFEV0_VAL(val) (((val) & 0x1))
-#define SYS2_CLKCLR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV0) | ((val & 0x1)))
-
-/*******************************************************************************
- * SYS2 Reset Status Register
- ******************************************************************************/
-
-/* HWACC3 Reset */
-#define SYS2_RSR_HWACC3 (0x1 << 11)
-#define SYS2_RSR_HWACC3_VAL(val) (((val) & 0x1) << 11)
-#define SYS2_RSR_HWACC3_GET(val) (((val) & SYS2_RSR_HWACC3) >> 11)
-/* HWACC2 Reset */
-#define SYS2_RSR_HWACC2 (0x1 << 10)
-#define SYS2_RSR_HWACC2_VAL(val) (((val) & 0x1) << 10)
-#define SYS2_RSR_HWACC2_GET(val) (((val) & SYS2_RSR_HWACC2) >> 10)
-/* HWACC1 Reset */
-#define SYS2_RSR_HWACC1 (0x1 << 9)
-#define SYS2_RSR_HWACC1_VAL(val) (((val) & 0x1) << 9)
-#define SYS2_RSR_HWACC1_GET(val) (((val) & SYS2_RSR_HWACC1) >> 9)
-/* HWACC0 Reset */
-#define SYS2_RSR_HWACC0 (0x1 << 8)
-#define SYS2_RSR_HWACC0_VAL(val) (((val) & 0x1) << 8)
-#define SYS2_RSR_HWACC0_GET(val) (((val) & SYS2_RSR_HWACC0) >> 8)
-/* DFEV7 Reset */
-#define SYS2_RSR_DFEV7 (0x1 << 7)
-#define SYS2_RSR_DFEV7_VAL(val) (((val) & 0x1) << 7)
-#define SYS2_RSR_DFEV7_GET(val) (((val) & SYS2_RSR_DFEV7) >> 7)
-/* DFEV6 Reset */
-#define SYS2_RSR_DFEV6 (0x1 << 6)
-#define SYS2_RSR_DFEV6_VAL(val) (((val) & 0x1) << 6)
-#define SYS2_RSR_DFEV6_GET(val) (((val) & SYS2_RSR_DFEV6) >> 6)
-/* DFEV5 Reset */
-#define SYS2_RSR_DFEV5 (0x1 << 5)
-#define SYS2_RSR_DFEV5_VAL(val) (((val) & 0x1) << 5)
-#define SYS2_RSR_DFEV5_GET(val) (((val) & SYS2_RSR_DFEV5) >> 5)
-/* DFEV4 Reset */
-#define SYS2_RSR_DFEV4 (0x1 << 4)
-#define SYS2_RSR_DFEV4_VAL(val) (((val) & 0x1) << 4)
-#define SYS2_RSR_DFEV4_GET(val) (((val) & SYS2_RSR_DFEV4) >> 4)
-/* DFEV3 Reset */
-#define SYS2_RSR_DFEV3 (0x1 << 3)
-#define SYS2_RSR_DFEV3_VAL(val) (((val) & 0x1) << 3)
-#define SYS2_RSR_DFEV3_GET(val) (((val) & SYS2_RSR_DFEV3) >> 3)
-/* DFEV2 Reset */
-#define SYS2_RSR_DFEV2 (0x1 << 2)
-#define SYS2_RSR_DFEV2_VAL(val) (((val) & 0x1) << 2)
-#define SYS2_RSR_DFEV2_GET(val) (((val) & SYS2_RSR_DFEV2) >> 2)
-/* DFEV1 Reset */
-#define SYS2_RSR_DFEV1 (0x1 << 1)
-#define SYS2_RSR_DFEV1_VAL(val) (((val) & 0x1) << 1)
-#define SYS2_RSR_DFEV1_GET(val) (((val) & SYS2_RSR_DFEV1) >> 1)
-/* DFEV0 Reset */
-#define SYS2_RSR_DFEV0 (0x1)
-#define SYS2_RSR_DFEV0_VAL(val) (((val) & 0x1))
-#define SYS2_RSR_DFEV0_GET(val) ((val) & SYS2_RSR_DFEV0)
-
-/******************************************************************************
- * SYS2 Reset Request Register
- ******************************************************************************/
-
-/* HWACC3 Reset Request */
-#define SYS2_RREQR_HWACC3 (0x1 << 11)
-#define SYS2_RREQR_HWACC3_VAL(val) (((val) & 0x1) << 11)
-#define SYS2_RREQR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC3) | ((val & 0x1) << 11))
-/* HWACC2 Reset Request */
-#define SYS2_RREQR_HWACC2 (0x1 << 10)
-#define SYS2_RREQR_HWACC2_VAL(val) (((val) & 0x1) << 10)
-#define SYS2_RREQR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC2) | ((val & 0x1) << 10))
-/* HWACC1 Reset Request */
-#define SYS2_RREQR_HWACC1 (0x1 << 9)
-#define SYS2_RREQR_HWACC1_VAL(val) (((val) & 0x1) << 9)
-#define SYS2_RREQR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC1) | ((val & 0x1) << 9))
-/* HWACC0 Reset Request */
-#define SYS2_RREQR_HWACC0 (0x1 << 8)
-#define SYS2_RREQR_HWACC0_VAL(val) (((val) & 0x1) << 8)
-#define SYS2_RREQR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC0) | ((val & 0x1) << 8))
-/* DFEV7 Reset Request */
-#define SYS2_RREQR_DFEV7 (0x1 << 7)
-#define SYS2_RREQR_DFEV7_VAL(val) (((val) & 0x1) << 7)
-#define SYS2_RREQR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV7) | ((val & 0x1) << 7))
-/* DFEV6 Reset Request */
-#define SYS2_RREQR_DFEV6 (0x1 << 6)
-#define SYS2_RREQR_DFEV6_VAL(val) (((val) & 0x1) << 6)
-#define SYS2_RREQR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV6) | ((val & 0x1) << 6))
-/* DFEV5 Reset Request */
-#define SYS2_RREQR_DFEV5 (0x1 << 5)
-#define SYS2_RREQR_DFEV5_VAL(val) (((val) & 0x1) << 5)
-#define SYS2_RREQR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV5) | ((val & 0x1) << 5))
-/* DFEV4 Reset Request */
-#define SYS2_RREQR_DFEV4 (0x1 << 4)
-#define SYS2_RREQR_DFEV4_VAL(val) (((val) & 0x1) << 4)
-#define SYS2_RREQR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV4) | ((val & 0x1) << 4))
-/* DFEV3 Reset Request */
-#define SYS2_RREQR_DFEV3 (0x1 << 3)
-#define SYS2_RREQR_DFEV3_VAL(val) (((val) & 0x1) << 3)
-#define SYS2_RREQR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV3) | ((val & 0x1) << 3))
-/* DFEV2 Reset Request */
-#define SYS2_RREQR_DFEV2 (0x1 << 2)
-#define SYS2_RREQR_DFEV2_VAL(val) (((val) & 0x1) << 2)
-#define SYS2_RREQR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV2) | ((val & 0x1) << 2))
-/* DFEV1 Reset Request */
-#define SYS2_RREQR_DFEV1 (0x1 << 1)
-#define SYS2_RREQR_DFEV1_VAL(val) (((val) & 0x1) << 1)
-#define SYS2_RREQR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV1) | ((val & 0x1) << 1))
-/* DFEV0 Reset Request */
-#define SYS2_RREQR_DFEV0 (0x1)
-#define SYS2_RREQR_DFEV0_VAL(val) (((val) & 0x1))
-#define SYS2_RREQR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV0) | ((val & 0x1)))
-
-/*******************************************************************************
- * SYS2 Reset Release Register
- ******************************************************************************/
-
-/* HWACC3 Reset Release */
-#define SYS2_RRLSR_HWACC3 (0x1 << 11)
-#define SYS2_RRLSR_HWACC3_VAL(val) (((val) & 0x1) << 11)
-#define SYS2_RRLSR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC3) | ((val & 0x1) << 11))
-/* HWACC2 Reset Release */
-#define SYS2_RRLSR_HWACC2 (0x1 << 10)
-#define SYS2_RRLSR_HWACC2_VAL(val) (((val) & 0x1) << 10)
-#define SYS2_RRLSR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC2) | ((val & 0x1) << 10))
-/* HWACC1 Reset Release */
-#define SYS2_RRLSR_HWACC1 (0x1 << 9)
-#define SYS2_RRLSR_HWACC1_VAL(val) (((val) & 0x1) << 9)
-#define SYS2_RRLSR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC1) | ((val & 0x1) << 9))
-/* HWACC0 Reset Release */
-#define SYS2_RRLSR_HWACC0 (0x1 << 8)
-#define SYS2_RRLSR_HWACC0_VAL(val) (((val) & 0x1) << 8)
-#define SYS2_RRLSR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC0) | ((val & 0x1) << 8))
-/* DFEV7 Reset Release */
-#define SYS2_RRLSR_DFEV7 (0x1 << 7)
-#define SYS2_RRLSR_DFEV7_VAL(val) (((val) & 0x1) << 7)
-#define SYS2_RRLSR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV7) | ((val & 0x1) << 7))
-/* DFEV6 Reset Release */
-#define SYS2_RRLSR_DFEV6 (0x1 << 6)
-#define SYS2_RRLSR_DFEV6_VAL(val) (((val) & 0x1) << 6)
-#define SYS2_RRLSR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV6) | ((val & 0x1) << 6))
-/* DFEV5 Reset Release */
-#define SYS2_RRLSR_DFEV5 (0x1 << 5)
-#define SYS2_RRLSR_DFEV5_VAL(val) (((val) & 0x1) << 5)
-#define SYS2_RRLSR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV5) | ((val & 0x1) << 5))
-/* DFEV4 Reset Release */
-#define SYS2_RRLSR_DFEV4 (0x1 << 4)
-#define SYS2_RRLSR_DFEV4_VAL(val) (((val) & 0x1) << 4)
-#define SYS2_RRLSR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV4) | ((val & 0x1) << 4))
-/* DFEV3 Reset Release */
-#define SYS2_RRLSR_DFEV3 (0x1 << 3)
-#define SYS2_RRLSR_DFEV3_VAL(val) (((val) & 0x1) << 3)
-#define SYS2_RRLSR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV3) | ((val & 0x1) << 3))
-/* DFEV2 Reset Release */
-#define SYS2_RRLSR_DFEV2 (0x1 << 2)
-#define SYS2_RRLSR_DFEV2_VAL(val) (((val) & 0x1) << 2)
-#define SYS2_RRLSR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV2) | ((val & 0x1) << 2))
-/* DFEV1 Reset Release */
-#define SYS2_RRLSR_DFEV1 (0x1 << 1)
-#define SYS2_RRLSR_DFEV1_VAL(val) (((val) & 0x1) << 1)
-#define SYS2_RRLSR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV1) | ((val & 0x1) << 1))
-/* DFEV0 Reset Release */
-#define SYS2_RRLSR_DFEV0 (0x1)
-#define SYS2_RRLSR_DFEV0_VAL(val) (((val) & 0x1))
-#define SYS2_RRLSR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV0) | ((val & 0x1)))
-
-#endif /* __SYS2_H */
-
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-buttons.c b/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-buttons.c
deleted file mode 100644
index ad25cac797..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-buttons.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Lantiq GPIO button support
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-
-#include <dev-gpio-buttons.h>
-
-void __init ltq_register_gpio_keys_polled(int id,
- unsigned poll_interval,
- unsigned nbuttons,
- struct gpio_keys_button *buttons)
-{
- struct platform_device *pdev;
- struct gpio_keys_platform_data pdata;
- struct gpio_keys_button *p;
- int err;
-
- p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
- if (!p)
- return;
-
- memcpy(p, buttons, nbuttons * sizeof(*p));
-
- pdev = platform_device_alloc("gpio-keys-polled", id);
- if (!pdev)
- goto err_free_buttons;
-
- memset(&pdata, 0, sizeof(pdata));
- pdata.poll_interval = poll_interval;
- pdata.nbuttons = nbuttons;
- pdata.buttons = p;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto err_put_pdev;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put_pdev;
-
- return;
-
-err_put_pdev:
- platform_device_put(pdev);
-
-err_free_buttons:
- kfree(p);
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-leds.c b/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-leds.c
deleted file mode 100644
index 89dc79de61..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/dev-gpio-leds.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Lantiq GPIO LED device support
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-
-#include <dev-gpio-leds.h>
-
-void __init ltq_add_device_gpio_leds(int id, unsigned num_leds,
- struct gpio_led *leds)
-{
- struct platform_device *pdev;
- struct gpio_led_platform_data pdata;
- struct gpio_led *p;
- int err;
-
- p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
- if (!p)
- return;
-
- memcpy(p, leds, num_leds * sizeof(*p));
-
- pdev = platform_device_alloc("leds-gpio", id);
- if (!pdev)
- goto err_free_leds;
-
- memset(&pdata, 0, sizeof(pdata));
- pdata.num_leds = num_leds;
- pdata.leds = p;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto err_put_pdev;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put_pdev;
-
- return;
-
-err_put_pdev:
- platform_device_put(pdev);
-
-err_free_leds:
- kfree(p);
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/Kconfig b/target/linux/lantiq/files/arch/mips/lantiq/falcon/Kconfig
deleted file mode 100644
index 03e999d92e..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if SOC_FALCON
-
-menu "MIPS Machine"
-
-config LANTIQ_MACH_EASY98000
- bool "Easy98000"
- default y
-
-endmenu
-
-endif
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/Makefile b/target/linux/lantiq/files/arch/mips/lantiq/falcon/Makefile
deleted file mode 100644
index 3634154fb9..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-y := prom.o reset.o sysctrl.o devices.o gpio.o
-obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/addon-easy98000.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/addon-easy98000.c
deleted file mode 100644
index 317ee4001b..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/addon-easy98000.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * EASY98000 CPLD Addon driver
- *
- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-
-struct easy98000_reg_cpld {
- u16 cmdreg1; /* 0x1 */
- u16 cmdreg0; /* 0x0 */
- u16 idreg0; /* 0x3 */
- u16 resreg; /* 0x2 */
- u16 intreg; /* 0x5 */
- u16 idreg1; /* 0x4 */
- u16 ledreg; /* 0x7 */
- u16 pcmconconfig; /* 0x6 */
- u16 res0; /* 0x9 */
- u16 ethledreg; /* 0x8 */
- u16 res1[4]; /* 0xa-0xd */
- u16 cpld1v; /* 0xf */
- u16 cpld2v; /* 0xe */
-};
-static struct easy98000_reg_cpld * const cpld =
- (struct easy98000_reg_cpld *)(KSEG1 | 0x17c00000);
-#define cpld_r8(reg) (__raw_readw(&cpld->reg) & 0xFF)
-#define cpld_w8(val, reg) __raw_writew((val) & 0xFF, &cpld->reg)
-
-int easy98000_addon_has_dm9000(void)
-{
- if ((cpld_r8(idreg0) & 0xF) == 1)
- return 1;
- return 0;
-}
-
-#if defined(CONFIG_PROC_FS)
-typedef void (*cpld_dump) (struct seq_file *s);
-struct proc_entry {
- char *name;
- void *callback;
-};
-
-static int cpld_proc_show ( struct seq_file *s, void *p )
-{
- cpld_dump dump = s->private;
-
- if ( dump != NULL )
- dump(s);
-
- return 0;
-}
-
-static int cpld_proc_open ( struct inode *inode, struct file *file )
-{
- return single_open ( file, cpld_proc_show, PDE(inode)->data );
-}
-
-static void cpld_versions_get ( struct seq_file *s )
-{
- seq_printf(s, "CPLD1: V%d\n", cpld_r8(cpld1v));
- seq_printf(s, "CPLD2: V%d\n", cpld_r8(cpld2v));
-}
-
-static void cpld_ebu_module_get ( struct seq_file *s )
-{
- u8 addon_id;
-
- addon_id = cpld_r8(idreg0) & 0xF;
- switch (addon_id) {
- case 0xF: /* nothing connected */
- break;
- case 1:
- seq_printf(s, "Ethernet Controller module (dm9000)\n");
- break;
- default:
- seq_printf(s, "Unknown EBU module (EBU_ID=0x%02X)\n", addon_id);
- break;
- }
-}
-
-static void cpld_xmii_module_get ( struct seq_file *s )
-{
- u8 addon_id;
- char *mod = NULL;
-
- addon_id = cpld_r8(idreg1) & 0xF;
- switch (addon_id) {
- case 0xF:
- mod = "no module";
- break;
- case 0x1:
- mod = "RGMII module";
- break;
- case 0x4:
- mod = "GMII MAC Mode (XWAY TANTOS-3G)";
- break;
- case 0x6:
- mod = "TMII MAC Mode (XWAY TANTOS-3G)";
- break;
- case 0x8:
- mod = "GMII PHY module";
- break;
- case 0x9:
- mod = "MII PHY module";
- break;
- case 0xA:
- mod = "RMII PHY module";
- break;
- default:
- break;
- }
- if (mod)
- seq_printf(s, "%s\n", mod);
- else
- seq_printf(s, "unknown xMII module (xMII_ID=0x%02X)\n", addon_id);
-}
-
-static struct proc_entry proc_entries[] = {
- {"versions", cpld_versions_get},
- {"ebu", cpld_ebu_module_get},
- {"xmii", cpld_xmii_module_get},
-};
-
-static struct file_operations ops = {
- .owner = THIS_MODULE,
- .open = cpld_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static void cpld_proc_entry_create(struct proc_dir_entry *parent_node,
- struct proc_entry *proc_entry)
-{
- proc_create_data ( proc_entry->name, (S_IFREG | S_IRUGO), parent_node,
- &ops, proc_entry->callback);
-}
-
-static int cpld_proc_install(void)
-{
- struct proc_dir_entry *driver_proc_node;
-
- driver_proc_node = proc_mkdir("cpld", NULL);
- if (driver_proc_node != NULL) {
- int i;
- for (i = 0; i < ARRAY_SIZE(proc_entries); i++)
- cpld_proc_entry_create(driver_proc_node,
- &proc_entries[i]);
- } else {
- printk("cannot create proc entry");
- return -1;
- }
- return 0;
-}
-#else
-static inline int cpld_proc_install(void) {}
-#endif
-
-static int easy98000_addon_probe(struct platform_device *pdev)
-{
- return cpld_proc_install();
-}
-
-static int easy98000_addon_remove(struct platform_device *pdev)
-{
-#if defined(CONFIG_PROC_FS)
- char buf[64];
- int i;
-
- for (i = 0; i < sizeof(proc_entries) / sizeof(proc_entries[0]); i++) {
- sprintf(buf, "cpld/%s", proc_entries[i].name);
- remove_proc_entry(buf, 0);
- }
- remove_proc_entry("cpld", 0);
-#endif
- return 0;
-}
-
-static struct platform_driver easy98000_addon_driver = {
- .probe = easy98000_addon_probe,
- .remove = __devexit_p(easy98000_addon_remove),
- .driver = {
- .name = "easy98000_addon",
- .owner = THIS_MODULE,
- },
-};
-
-int __init easy98000_addon_init(void)
-{
- return platform_driver_register(&easy98000_addon_driver);
-}
-
-void __exit easy98000_addon_exit(void)
-{
- platform_driver_unregister(&easy98000_addon_driver);
-}
-
-module_init(easy98000_addon_init);
-module_exit(easy98000_addon_exit);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c
deleted file mode 100644
index 94622cfda8..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * EASY98000 CPLD LED driver
- *
- * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/leds.h>
-#include <linux/slab.h>
-
-#include "dev-leds-easy98000-cpld.h"
-
-const char *led_name[8] = {
- "ge0_act",
- "ge0_link",
- "ge1_act",
- "ge1_link",
- "fe2_act",
- "fe2_link",
- "fe3_act",
- "fe3_link"
-};
-
-#define cpld_base7 ((u16 *)(KSEG1 | 0x17c0000c))
-#define cpld_base8 ((u16 *)(KSEG1 | 0x17c00012))
-
-#define ltq_r16(reg) __raw_readw(reg)
-#define ltq_w16(val, reg) __raw_writew(val, reg)
-
-struct cpld_led_dev {
- struct led_classdev cdev;
- u8 mask;
- u16 *base;
-};
-
-struct cpld_led_drvdata {
- struct cpld_led_dev *led_devs;
- int num_leds;
-};
-
-void led_set(u8 mask, u16 *base)
-{
- ltq_w16(ltq_r16(base) | mask, base);
-}
-
-void led_clear(u8 mask, u16 *base)
-{
- ltq_w16(ltq_r16(base) & (~mask), base);
-}
-
-void led_blink_clear(u8 mask, u16 *base)
-{
- led_clear(mask, base);
-}
-
-static void led_brightness(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- struct cpld_led_dev *led_dev =
- container_of(led_cdev, struct cpld_led_dev, cdev);
-
- if (value)
- led_set(led_dev->mask, led_dev->base);
- else
- led_clear(led_dev->mask, led_dev->base);
-}
-
-static int led_probe(struct platform_device *pdev)
-{
- int i;
- char name[32];
- struct cpld_led_drvdata *drvdata;
- int ret = 0;
-
- drvdata = kzalloc(sizeof(struct cpld_led_drvdata) +
- sizeof(struct cpld_led_dev) * MAX_LED,
- GFP_KERNEL);
- if (!drvdata)
- return -ENOMEM;
-
- drvdata->led_devs = (struct cpld_led_dev *) &drvdata[1];
-
- for (i = 0; i < MAX_LED; i++) {
- struct cpld_led_dev *led_dev = &drvdata->led_devs[i];
- led_dev->cdev.brightness_set = led_brightness;
- led_dev->cdev.default_trigger = NULL;
- led_dev->mask = 1 << (i % 8);
- if(i < 8) {
- sprintf(name, "easy98000-cpld:%s", led_name[i]);
- led_dev->base = cpld_base8;
- } else {
- sprintf(name, "easy98000-cpld:red:%d", i-8);
- led_dev->base = cpld_base7;
- }
- led_dev->cdev.name = name;
- ret = led_classdev_register(&pdev->dev, &led_dev->cdev);
- if (ret)
- goto err;
- }
- platform_set_drvdata(pdev, drvdata);
- return 0;
-
-err:
- printk("led_probe: 3\n");
- for (i = i - 1; i >= 0; i--)
- led_classdev_unregister(&drvdata->led_devs[i].cdev);
-
- kfree(drvdata);
- return ret;
-}
-
-static int led_remove(struct platform_device *pdev)
-{
- int i;
- struct cpld_led_drvdata *drvdata = platform_get_drvdata(pdev);
- for (i = 0; i < MAX_LED; i++)
- led_classdev_unregister(&drvdata->led_devs[i].cdev);
- kfree(drvdata);
- return 0;
-}
-
-static struct platform_driver led_driver = {
- .probe = led_probe,
- .remove = __devexit_p(led_remove),
- .driver = {
- .name = LED_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-int __init easy98000_cpld_led_init(void)
-{
- pr_info(LED_DESC ", Version " LED_VERSION
- " (c) Copyright 2011, Lantiq Deutschland GmbH\n");
- return platform_driver_register(&led_driver);
-}
-
-void __exit easy98000_cpld_led_exit(void)
-{
- platform_driver_unregister(&led_driver);
-}
-
-module_init(easy98000_cpld_led_init);
-module_exit(easy98000_cpld_led_exit);
-
-MODULE_DESCRIPTION(LED_NAME);
-MODULE_DESCRIPTION(LED_DESC);
-MODULE_AUTHOR("Ralph Hempel <ralph.hempel@lantiq.com>");
-MODULE_LICENSE("GPL v2");
-
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h b/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h
deleted file mode 100644
index 3160189fe9..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * EASY98000 CPLD LED driver
- *
- * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef _INCLUDE_EASY98000_CPLD_LED_H_
-#define _INCLUDE_EASY98000_CPLD_LED_H_
-
-#define LED_NAME "easy98000_cpld_led"
-#define LED_DESC "EASY98000 LED driver"
-#define LED_VERSION "1.0.0"
-
-#define MAX_LED 16
-
-#endif /* _INCLUDE_EASY98000_CPLD_LED_H_ */
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.c
deleted file mode 100644
index e684ed470f..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/gpio.h>
-
-#include <lantiq_soc.h>
-
-#include "devices.h"
-
-/* nand flash */
-/* address lines used for NAND control signals */
-#define NAND_ADDR_ALE 0x10000
-#define NAND_ADDR_CLE 0x20000
-/* Ready/Busy Status */
-#define MODCON_STS 0x0002
-/* Ready/Busy Status Edge */
-#define MODCON_STSEDGE 0x0004
-
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
-static int
-falcon_nand_ready(struct mtd_info *mtd)
-{
- u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON);
-
- return (((modcon & (MODCON_STS | MODCON_STSEDGE)) ==
- (MODCON_STS | MODCON_STSEDGE)));
-}
-
-static void
-falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE);
-
- if (ctrl & NAND_CLE)
- nandaddr |= NAND_ADDR_CLE;
- if (ctrl & NAND_ALE)
- nandaddr |= NAND_ADDR_ALE;
-
- this->IO_ADDR_W = (void __iomem *) nandaddr;
- }
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
-}
-
-static struct platform_nand_data falcon_flash_nand_data = {
- .chip = {
- .nr_chips = 1,
- .chip_delay = 25,
- .part_probe_types = part_probes,
- },
- .ctrl = {
- .cmd_ctrl = falcon_hwcontrol,
- .dev_ready = falcon_nand_ready,
- }
-};
-
-static struct resource ltq_nand_res =
- MEM_RES("nand", LTQ_FLASH_START, LTQ_FLASH_MAX);
-
-static struct platform_device ltq_flash_nand = {
- .name = "gen_nand",
- .id = -1,
- .num_resources = 1,
- .resource = &ltq_nand_res,
- .dev = {
- .platform_data = &falcon_flash_nand_data,
- },
-};
-
-void __init
-falcon_register_nand(void)
-{
- platform_device_register(&ltq_flash_nand);
-}
-
-/* gpio */
-#define DECLARE_GPIO_RES(port) \
-static struct resource falcon_gpio ## port ## _res[] = { \
- MEM_RES("gpio"#port, LTQ_GPIO ## port ## _BASE_ADDR, \
- LTQ_GPIO ## port ## _SIZE), \
- MEM_RES("padctrl"#port, LTQ_PADCTRL ## port ## _BASE_ADDR, \
- LTQ_PADCTRL ## port ## _SIZE), \
- IRQ_RES("gpio_mux"#port, FALCON_IRQ_GPIO_P ## port) \
-}
-DECLARE_GPIO_RES(0);
-DECLARE_GPIO_RES(1);
-DECLARE_GPIO_RES(2);
-DECLARE_GPIO_RES(3);
-DECLARE_GPIO_RES(4);
-
-void __init
-falcon_register_gpio(void)
-{
- platform_device_register_simple("falcon_gpio", 0,
- falcon_gpio0_res, ARRAY_SIZE(falcon_gpio0_res));
- platform_device_register_simple("falcon_gpio", 1,
- falcon_gpio1_res, ARRAY_SIZE(falcon_gpio1_res));
- platform_device_register_simple("falcon_gpio", 2,
- falcon_gpio2_res, ARRAY_SIZE(falcon_gpio2_res));
-}
-
-void __init
-falcon_register_gpio_extra(void)
-{
- platform_device_register_simple("falcon_gpio", 3,
- falcon_gpio3_res, ARRAY_SIZE(falcon_gpio3_res));
- platform_device_register_simple("falcon_gpio", 4,
- falcon_gpio4_res, ARRAY_SIZE(falcon_gpio4_res));
-}
-
-/* spi flash */
-static struct platform_device ltq_spi = {
- .name = "falcon_spi",
- .num_resources = 0,
-};
-
-void __init
-falcon_register_spi_flash(struct spi_board_info *data)
-{
- spi_register_board_info(data, 1);
- platform_device_register(&ltq_spi);
-}
-
-/* i2c */
-static struct resource falcon_i2c_resources[] = {
- MEM_RES("i2c", GPON_I2C_BASE, GPON_I2C_SIZE),
- IRQ_RES(i2c_lb, FALCON_IRQ_I2C_LBREQ),
- IRQ_RES(i2c_b, FALCON_IRQ_I2C_BREQ),
- IRQ_RES(i2c_err, FALCON_IRQ_I2C_I2C_ERR),
- IRQ_RES(i2c_p, FALCON_IRQ_I2C_I2C_P),
-};
-
-void __init
-falcon_register_i2c(void)
-{
- platform_device_register_simple("i2c-falcon", 0,
- falcon_i2c_resources, ARRAY_SIZE(falcon_i2c_resources));
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.h b/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.h
deleted file mode 100644
index d81edbe74e..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/devices.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#ifndef _FALCON_DEVICES_H__
-#define _FALCON_DEVICES_H__
-
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include "../devices.h"
-
-extern void falcon_register_nand(void);
-extern void falcon_register_gpio(void);
-extern void falcon_register_gpio_extra(void);
-extern void falcon_register_spi_flash(struct spi_board_info *data);
-extern void falcon_register_i2c(void);
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/gpio.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/gpio.c
deleted file mode 100644
index 4147d61c7d..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/gpio.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <lantiq_soc.h>
-
-/* Multiplexer Control Register */
-#define LTQ_PADC_MUX(x) (x * 0x4)
-/* Pad Control Availability Register */
-#define LTQ_PADC_AVAIL 0x000000F0
-
-/* Data Output Register */
-#define LTQ_GPIO_OUT 0x00000000
-/* Data Input Register */
-#define LTQ_GPIO_IN 0x00000004
-/* Direction Register */
-#define LTQ_GPIO_DIR 0x00000008
-/* External Interrupt Control Register 0 */
-#define LTQ_GPIO_EXINTCR0 0x00000018
-/* External Interrupt Control Register 1 */
-#define LTQ_GPIO_EXINTCR1 0x0000001C
-/* IRN Capture Register */
-#define LTQ_GPIO_IRNCR 0x00000020
-/* IRN Interrupt Configuration Register */
-#define LTQ_GPIO_IRNCFG 0x0000002C
-/* IRN Interrupt Enable Set Register */
-#define LTQ_GPIO_IRNRNSET 0x00000030
-/* IRN Interrupt Enable Clear Register */
-#define LTQ_GPIO_IRNENCLR 0x00000034
-/* Output Set Register */
-#define LTQ_GPIO_OUTSET 0x00000040
-/* Output Cler Register */
-#define LTQ_GPIO_OUTCLR 0x00000044
-/* Direction Clear Register */
-#define LTQ_GPIO_DIRSET 0x00000048
-/* Direction Set Register */
-#define LTQ_GPIO_DIRCLR 0x0000004C
-
-/* turn a gpio_chip into a falcon_gpio_port */
-#define ctop(c) container_of(c, struct falcon_gpio_port, gpio_chip)
-/* turn a irq_data into a falcon_gpio_port */
-#define itop(i) ((struct falcon_gpio_port *) irq_get_chip_data(i->irq))
-
-#define ltq_pad_r32(p, reg) ltq_r32(p->pad + reg)
-#define ltq_pad_w32(p, val, reg) ltq_w32(val, p->pad + reg)
-#define ltq_pad_w32_mask(c, clear, set, reg) \
- ltq_pad_w32(c, (ltq_pad_r32(c, reg) & ~(clear)) | (set), reg)
-
-#define ltq_port_r32(p, reg) ltq_r32(p->port + reg)
-#define ltq_port_w32(p, val, reg) ltq_w32(val, p->port + reg)
-#define ltq_port_w32_mask(p, clear, set, reg) \
- ltq_port_w32(p, (ltq_port_r32(p, reg) & ~(clear)) | (set), reg)
-
-#define MAX_PORTS 5
-#define PINS_PER_PORT 32
-
-struct falcon_gpio_port {
- struct gpio_chip gpio_chip;
- void __iomem *pad;
- void __iomem *port;
- unsigned int irq_base;
- unsigned int chained_irq;
- struct clk *clk;
-};
-
-static struct falcon_gpio_port ltq_gpio_port[MAX_PORTS];
-
-int gpio_to_irq(unsigned int gpio)
-{
- return __gpio_to_irq(gpio);
-}
-EXPORT_SYMBOL(gpio_to_irq);
-
-int ltq_gpio_mux_set(unsigned int pin, unsigned int mux)
-{
- int port = pin / 100;
- int offset = pin % 100;
- struct falcon_gpio_port *gpio_port;
-
- if ((offset >= PINS_PER_PORT) || (port >= MAX_PORTS))
- return -EINVAL;
-
- gpio_port = &ltq_gpio_port[port];
- ltq_pad_w32(gpio_port, mux & 0x3, LTQ_PADC_MUX(offset));
-
- return 0;
-}
-EXPORT_SYMBOL(ltq_gpio_mux_set);
-
-int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
- unsigned int dir, const char *name)
-{
- int port = pin / 100;
- int offset = pin % 100;
-
- if (offset >= PINS_PER_PORT || port >= MAX_PORTS)
- return -EINVAL;
-
- if (devm_gpio_request(dev, pin, name)) {
- pr_err("failed to setup lantiq gpio: %s\n", name);
- return -EBUSY;
- }
-
- if (dir)
- gpio_direction_output(pin, 1);
- else
- gpio_direction_input(pin);
-
- return ltq_gpio_mux_set(pin, mux);
-}
-EXPORT_SYMBOL(ltq_gpio_request);
-
-static int
-falcon_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
-{
- ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_DIRCLR);
-
- return 0;
-}
-
-static void
-falcon_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
-{
- if (value)
- ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_OUTSET);
- else
- ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_OUTCLR);
-}
-
-static int
-falcon_gpio_direction_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- falcon_gpio_set(chip, offset, value);
- ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_DIRSET);
-
- return 0;
-}
-
-static int
-falcon_gpio_get(struct gpio_chip *chip, unsigned int offset)
-{
- if ((ltq_port_r32(ctop(chip), LTQ_GPIO_DIR) >> offset) & 1)
- return (ltq_port_r32(ctop(chip), LTQ_GPIO_OUT) >> offset) & 1;
- else
- return (ltq_port_r32(ctop(chip), LTQ_GPIO_IN) >> offset) & 1;
-}
-
-static int
-falcon_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- if ((ltq_pad_r32(ctop(chip), LTQ_PADC_AVAIL) >> offset) & 1) {
- if (ltq_pad_r32(ctop(chip), LTQ_PADC_MUX(offset)) > 1)
- return -EBUSY;
- /* switch on gpio function */
- ltq_pad_w32(ctop(chip), 1, LTQ_PADC_MUX(offset));
- return 0;
- }
-
- return -ENODEV;
-}
-
-static void
-falcon_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
- if ((ltq_pad_r32(ctop(chip), LTQ_PADC_AVAIL) >> offset) & 1) {
- if (ltq_pad_r32(ctop(chip), LTQ_PADC_MUX(offset)) > 1)
- return;
- /* switch off gpio function */
- ltq_pad_w32(ctop(chip), 0, LTQ_PADC_MUX(offset));
- }
-}
-
-static int
-falcon_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- return ctop(chip)->irq_base + offset;
-}
-
-static void
-falcon_gpio_disable_irq(struct irq_data *d)
-{
- unsigned int offset = d->irq - itop(d)->irq_base;
-
- ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNENCLR);
-}
-
-static void
-falcon_gpio_enable_irq(struct irq_data *d)
-{
- unsigned int offset = d->irq - itop(d)->irq_base;
-
- if (!ltq_pad_r32(itop(d), LTQ_PADC_MUX(offset)) < 1)
- /* switch on gpio function */
- ltq_pad_w32(itop(d), 1, LTQ_PADC_MUX(offset));
-
- ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNRNSET);
-}
-
-static void
-falcon_gpio_ack_irq(struct irq_data *d)
-{
- unsigned int offset = d->irq - itop(d)->irq_base;
-
- ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNCR);
-}
-
-static void
-falcon_gpio_mask_and_ack_irq(struct irq_data *d)
-{
- unsigned int offset = d->irq - itop(d)->irq_base;
-
- ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNENCLR);
- ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNCR);
-}
-
-static struct irq_chip falcon_gpio_irq_chip;
-static int
-falcon_gpio_irq_type(struct irq_data *d, unsigned int type)
-{
- unsigned int offset = d->irq - itop(d)->irq_base;
- unsigned int mask = 1 << offset;
-
- if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE)
- return 0;
-
- if ((type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) != 0) {
- /* level triggered */
- ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_IRNCFG);
- irq_set_chip_and_handler_name(d->irq,
- &falcon_gpio_irq_chip, handle_level_irq, "mux");
- } else {
- /* edge triggered */
- ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_IRNCFG);
- irq_set_chip_and_handler_name(d->irq,
- &falcon_gpio_irq_chip, handle_simple_irq, "mux");
- }
-
- if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
- ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR0);
- ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_EXINTCR1);
- } else {
- if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) != 0)
- /* positive logic: rising edge, high level */
- ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR0);
- else
- /* negative logic: falling edge, low level */
- ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_EXINTCR0);
- ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR1);
- }
-
- return gpio_direction_input(itop(d)->gpio_chip.base + offset);
-}
-
-static void
-falcon_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- struct falcon_gpio_port *gpio_port = irq_desc_get_handler_data(desc);
- unsigned long irncr;
- int offset;
-
- /* acknowledge interrupt */
- irncr = ltq_port_r32(gpio_port, LTQ_GPIO_IRNCR);
- ltq_port_w32(gpio_port, irncr, LTQ_GPIO_IRNCR);
-
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-
- for_each_set_bit(offset, &irncr, gpio_port->gpio_chip.ngpio)
- generic_handle_irq(gpio_port->irq_base + offset);
-}
-
-static struct irq_chip falcon_gpio_irq_chip = {
- .name = "gpio_irq_mux",
- .irq_mask = falcon_gpio_disable_irq,
- .irq_unmask = falcon_gpio_enable_irq,
- .irq_ack = falcon_gpio_ack_irq,
- .irq_mask_ack = falcon_gpio_mask_and_ack_irq,
- .irq_set_type = falcon_gpio_irq_type,
-};
-
-static struct irqaction gpio_cascade = {
- .handler = no_action,
- .flags = IRQF_DISABLED,
- .name = "gpio_cascade",
-};
-
-static int
-falcon_gpio_probe(struct platform_device *pdev)
-{
- struct falcon_gpio_port *gpio_port;
- int ret, i;
- struct resource *gpiores, *padres;
- int irq;
-
- if (pdev->id >= MAX_PORTS)
- return -ENODEV;
-
- gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- padres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- irq = platform_get_irq(pdev, 0);
- if (!gpiores || !padres)
- return -ENODEV;
-
- gpio_port = &ltq_gpio_port[pdev->id];
- gpio_port->gpio_chip.label = "falcon-gpio";
- gpio_port->gpio_chip.direction_input = falcon_gpio_direction_input;
- gpio_port->gpio_chip.direction_output = falcon_gpio_direction_output;
- gpio_port->gpio_chip.get = falcon_gpio_get;
- gpio_port->gpio_chip.set = falcon_gpio_set;
- gpio_port->gpio_chip.request = falcon_gpio_request;
- gpio_port->gpio_chip.free = falcon_gpio_free;
- gpio_port->gpio_chip.base = 100 * pdev->id;
- gpio_port->gpio_chip.ngpio = 32;
- gpio_port->gpio_chip.dev = &pdev->dev;
-
- gpio_port->port = ltq_remap_resource(gpiores);
- gpio_port->pad = ltq_remap_resource(padres);
-
- if (!gpio_port->port || !gpio_port->pad) {
- dev_err(&pdev->dev, "Could not map io ranges\n");
- ret = -ENOMEM;
- goto err;
- }
-
- gpio_port->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(gpio_port->clk)) {
- dev_err(&pdev->dev, "Could not get clock\n");
- ret = PTR_ERR(gpio_port->clk);;
- goto err;
- }
- clk_enable(gpio_port->clk);
-
- if (irq > 0) {
- /* irq_chip support */
- gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq;
- gpio_port->irq_base = INT_NUM_EXTRA_START + (32 * pdev->id);
-
- for (i = 0; i < 32; i++) {
- irq_set_chip_and_handler_name(gpio_port->irq_base + i,
- &falcon_gpio_irq_chip, handle_simple_irq,
- "mux");
- irq_set_chip_data(gpio_port->irq_base + i, gpio_port);
- /* set to negative logic (falling edge, low level) */
- ltq_port_w32_mask(gpio_port, 0, 1 << i,
- LTQ_GPIO_EXINTCR0);
- }
-
- gpio_port->chained_irq = irq;
- setup_irq(irq, &gpio_cascade);
- irq_set_handler_data(irq, gpio_port);
- irq_set_chained_handler(irq, falcon_gpio_irq_handler);
- }
-
- ret = gpiochip_add(&gpio_port->gpio_chip);
- if (ret < 0) {
- dev_err(&pdev->dev, "Could not register gpiochip %d, %d\n",
- pdev->id, ret);
- goto err;
- }
- platform_set_drvdata(pdev, gpio_port);
- return ret;
-
-err:
- dev_err(&pdev->dev, "Error in gpio_probe %d, %d\n", pdev->id, ret);
- if (gpiores)
- release_resource(gpiores);
- if (padres)
- release_resource(padres);
-
- if (gpio_port->port)
- iounmap(gpio_port->port);
- if (gpio_port->pad)
- iounmap(gpio_port->pad);
- return ret;
-}
-
-static struct platform_driver falcon_gpio_driver = {
- .probe = falcon_gpio_probe,
- .driver = {
- .name = "falcon_gpio",
- .owner = THIS_MODULE,
- },
-};
-
-int __init
-falcon_gpio_init(void)
-{
- int ret;
-
- pr_info("FALC(tm) ON GPIO Driver, (C) 2011 Lantiq Deutschland Gmbh\n");
- ret = platform_driver_register(&falcon_gpio_driver);
- if (ret)
- pr_err("falcon_gpio: Error registering platform driver!");
- return ret;
-}
-
-postcore_initcall(falcon_gpio_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-95C3AM1.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-95C3AM1.c
deleted file mode 100644
index 42a3344ae9..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-95C3AM1.c
+++ /dev/null
@@ -1,94 +0,0 @@
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <dev-gpio-leds.h>
-
-#include "../machtypes.h"
-#include "devices.h"
-
-#define BOARD_95C3AM1_GPIO_LED_0 10
-#define BOARD_95C3AM1_GPIO_LED_1 11
-#define BOARD_95C3AM1_GPIO_LED_2 12
-#define BOARD_95C3AM1_GPIO_LED_3 13
-
-static struct mtd_partition board_95C3AM1_partitions[] =
-{
- {
- .name = "uboot",
- .offset = 0x0,
- .size = 0x40000,
- },
- {
- .name = "uboot_env",
- .offset = 0x40000,
- .size = 0x40000, /* 2 sectors for redundant env. */
- },
- {
- .name = "linux",
- .offset = 0x80000,
- .size = 0xF80000, /* map only 16 MiB */
- },
-};
-
-static struct flash_platform_data board_95C3AM1_flash_platform_data = {
- .name = "sflash",
- .parts = board_95C3AM1_partitions,
- .nr_parts = ARRAY_SIZE(board_95C3AM1_partitions)
-};
-
-static struct spi_board_info board_95C3AM1_flash_data __initdata = {
- .modalias = "m25p80",
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .mode = SPI_MODE_3,
- .platform_data = &board_95C3AM1_flash_platform_data
-};
-
-static struct gpio_led board_95C3AM1_gpio_leds[] __initdata = {
- {
- .name = "power",
- .gpio = BOARD_95C3AM1_GPIO_LED_0,
- .active_low = 0,
- }, {
- .name = "optical",
- .gpio = BOARD_95C3AM1_GPIO_LED_1,
- .active_low = 0,
- }, {
- .name = "lan",
- .gpio = BOARD_95C3AM1_GPIO_LED_2,
- .active_low = 0,
- }, {
- .name = "update",
- .gpio = BOARD_95C3AM1_GPIO_LED_3,
- .active_low = 0,
- }
-};
-
-static struct i2c_gpio_platform_data board_95C3AM1_i2c_gpio_data = {
- .sda_pin = 107,
- .scl_pin = 108,
-};
-
-static struct platform_device board_95C3AM1_i2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &board_95C3AM1_i2c_gpio_data,
- }
-};
-
-static void __init board_95C3AM1_init(void)
-{
- falcon_register_i2c();
- falcon_register_spi_flash(&board_95C3AM1_flash_data);
- platform_device_register(&board_95C3AM1_i2c_gpio_device);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(board_95C3AM1_gpio_leds),
- board_95C3AM1_gpio_leds);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_95C3AM1,
- "95C3AM1",
- "95C3AM1 Board",
- board_95C3AM1_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98000.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98000.c
deleted file mode 100644
index fc5720d4ea..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98000.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/eeprom.h>
-
-#include "../machtypes.h"
-
-#include "devices.h"
-
-static struct mtd_partition easy98000_nor_partitions[] = {
- {
- .name = "uboot",
- .offset = 0x0,
- .size = 0x40000,
- },
- {
- .name = "uboot_env",
- .offset = 0x40000,
- .size = 0x40000, /* 2 sectors for redundant env. */
- },
- {
- .name = "linux",
- .offset = 0x80000,
- .size = 0xF80000, /* map only 16 MiB */
- },
-};
-
-struct physmap_flash_data easy98000_nor_flash_data = {
- .nr_parts = ARRAY_SIZE(easy98000_nor_partitions),
- .parts = easy98000_nor_partitions,
-};
-
-static struct flash_platform_data easy98000_spi_flash_platform_data = {
- .name = "sflash",
- .parts = easy98000_nor_partitions,
- .nr_parts = ARRAY_SIZE(easy98000_nor_partitions)
-};
-
-static struct spi_board_info easy98000_spi_flash_data __initdata = {
- .modalias = "m25p80",
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .mode = SPI_MODE_3,
- .platform_data = &easy98000_spi_flash_platform_data
-};
-
-/* setup gpio based spi bus/device for access to the eeprom on the board */
-#define SPI_GPIO_MRST 102
-#define SPI_GPIO_MTSR 103
-#define SPI_GPIO_CLK 104
-#define SPI_GPIO_CS0 105
-#define SPI_GPIO_CS1 106
-#define SPI_GPIO_BUS_NUM 1
-
-static struct spi_gpio_platform_data easy98000_spi_gpio_data = {
- .sck = SPI_GPIO_CLK,
- .mosi = SPI_GPIO_MTSR,
- .miso = SPI_GPIO_MRST,
- .num_chipselect = 2,
-};
-
-static struct platform_device easy98000_spi_gpio_device = {
- .name = "spi_gpio",
- .id = SPI_GPIO_BUS_NUM,
- .dev.platform_data = &easy98000_spi_gpio_data,
-};
-
-static struct spi_eeprom at25160n = {
- .byte_len = 16 * 1024 / 8,
- .name = "at25160n",
- .page_size = 32,
- .flags = EE_ADDR2,
-};
-
-static struct spi_board_info easy98000_spi_gpio_devices __initdata = {
- .modalias = "at25",
- .bus_num = SPI_GPIO_BUS_NUM,
- .max_speed_hz = 1000 * 1000,
- .mode = SPI_MODE_3,
- .chip_select = 1,
- .controller_data = (void *) SPI_GPIO_CS1,
- .platform_data = &at25160n,
-};
-
-static void __init
-easy98000_init_common(void)
-{
- spi_register_board_info(&easy98000_spi_gpio_devices, 1);
- platform_device_register(&easy98000_spi_gpio_device);
- falcon_register_i2c();
-}
-
-static void __init
-easy98000_init(void)
-{
- easy98000_init_common();
- ltq_register_nor(&easy98000_nor_flash_data);
-}
-
-static void __init
-easy98000sf_init(void)
-{
- easy98000_init_common();
- falcon_register_spi_flash(&easy98000_spi_flash_data);
-}
-
-static void __init
-easy98000nand_init(void)
-{
- easy98000_init_common();
- falcon_register_nand();
-}
-
-MIPS_MACHINE(LANTIQ_MACH_EASY98000,
- "EASY98000",
- "EASY98000 Eval Board",
- easy98000_init);
-
-MIPS_MACHINE(LANTIQ_MACH_EASY98000SF,
- "EASY98000SF",
- "EASY98000 Eval Board (Serial Flash)",
- easy98000sf_init);
-
-MIPS_MACHINE(LANTIQ_MACH_EASY98000NAND,
- "EASY98000NAND",
- "EASY98000 Eval Board (NAND Flash)",
- easy98000nand_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98020.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98020.c
deleted file mode 100644
index 4cdfc199db..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98020.c
+++ /dev/null
@@ -1,118 +0,0 @@
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio_buttons.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <dev-gpio-leds.h>
-
-#include "../machtypes.h"
-#include "devices.h"
-
-#define EASY98020_GPIO_LED_0 9
-#define EASY98020_GPIO_LED_1 10
-#define EASY98020_GPIO_LED_2 11
-#define EASY98020_GPIO_LED_3 12
-#define EASY98020_GPIO_LED_GE0_ACT 110
-#define EASY98020_GPIO_LED_GE0_LINK 109
-#define EASY98020_GPIO_LED_GE1_ACT 106
-#define EASY98020_GPIO_LED_GE1_LINK 105
-
-static struct mtd_partition easy98020_spi_partitions[] =
-{
- {
- .name = "uboot",
- .offset = 0x0,
- .size = 0x40000,
- },
- {
- .name = "uboot_env",
- .offset = 0x40000,
- .size = 0x40000, /* 2 sectors for redundant env. */
- },
- {
- .name = "linux",
- .offset = 0x80000,
- .size = 0xF80000, /* map only 16 MiB */
- },
-};
-
-static struct flash_platform_data easy98020_spi_flash_platform_data = {
- .name = "sflash",
- .parts = easy98020_spi_partitions,
- .nr_parts = ARRAY_SIZE(easy98020_spi_partitions)
-};
-
-static struct spi_board_info easy98020_spi_flash_data __initdata = {
- .modalias = "m25p80",
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .mode = SPI_MODE_3,
- .platform_data = &easy98020_spi_flash_platform_data
-};
-
-static struct gpio_led easy98020_gpio_leds[] __initdata = {
- {
- .name = "easy98020:green:0",
- .gpio = EASY98020_GPIO_LED_0,
- .active_low = 0,
- }, {
- .name = "easy98020:green:1",
- .gpio = EASY98020_GPIO_LED_1,
- .active_low = 0,
- }, {
- .name = "easy98020:green:2",
- .gpio = EASY98020_GPIO_LED_2,
- .active_low = 0,
- }, {
- .name = "easy98020:green:3",
- .gpio = EASY98020_GPIO_LED_3,
- .active_low = 0,
- }, {
- .name = "easy98020:ge0_act",
- .gpio = EASY98020_GPIO_LED_GE0_ACT,
- .active_low = 0,
- }, {
- .name = "easy98020:ge0_link",
- .gpio = EASY98020_GPIO_LED_GE0_LINK,
- .active_low = 0,
- }, {
- .name = "easy98020:ge1_act",
- .gpio = EASY98020_GPIO_LED_GE1_ACT,
- .active_low = 0,
- }, {
- .name = "easy98020:ge1_link",
- .gpio = EASY98020_GPIO_LED_GE1_LINK,
- .active_low = 0,
- }
-};
-
-static void __init easy98020_init(void)
-{
- falcon_register_i2c();
- falcon_register_spi_flash(&easy98020_spi_flash_data);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(easy98020_gpio_leds),
- easy98020_gpio_leds);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_EASY98020,
- "EASY98020",
- "EASY98020 Eval Board",
- easy98020_init);
-
-MIPS_MACHINE(LANTIQ_MACH_EASY98020_1LAN,
- "EASY98020_1LAN",
- "EASY98020 Eval Board (1 LAN port)",
- easy98020_init);
-
-MIPS_MACHINE(LANTIQ_MACH_EASY98020_2LAN,
- "EASY98020_2LAN",
- "EASY98020 Eval Board (2 LAN ports)",
- easy98020_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/prom.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/prom.c
deleted file mode 100644
index 2a4eea1782..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/prom.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <lantiq_soc.h>
-
-#include "devices.h"
-
-#include "../prom.h"
-
-#define SOC_FALCON "Falcon"
-#define SOC_FALCON_D "Falcon-D"
-#define SOC_FALCON_V "Falcon-V"
-#define SOC_FALCON_M "Falcon-M"
-
-#define PART_SHIFT 12
-#define PART_MASK 0x0FFFF000
-#define REV_SHIFT 28
-#define REV_MASK 0xF0000000
-#define SREV_SHIFT 22
-#define SREV_MASK 0x03C00000
-#define TYPE_SHIFT 26
-#define TYPE_MASK 0x3C000000
-
-/* this parameter allows us enable/disable asc1 via commandline */
-static int register_asc1;
-static int __init
-ltq_parse_asc1(char *p)
-{
- register_asc1 = 1;
- return 0;
-}
-__setup("use_asc1", ltq_parse_asc1);
-
-void __init
-ltq_soc_setup(void)
-{
- ltq_register_asc(0);
- ltq_register_wdt();
- falcon_register_gpio();
- if (register_asc1)
- ltq_register_asc(1);
-}
-
-void __init
-ltq_soc_detect(struct ltq_soc_info *i)
-{
- u32 type;
- i->partnum = (ltq_r32(LTQ_FALCON_CHIPID) & PART_MASK) >> PART_SHIFT;
- i->rev = (ltq_r32(LTQ_FALCON_CHIPID) & REV_MASK) >> REV_SHIFT;
- i->srev = ((ltq_r32(LTQ_FALCON_CHIPCONF) & SREV_MASK) >> SREV_SHIFT);
- sprintf(i->rev_type, "%c%d%d", (i->srev & 0x4) ? ('B') : ('A'),
- i->rev & 0x7, (i->srev & 0x3) + 1);
-
- switch (i->partnum) {
- case SOC_ID_FALCON:
- type = (ltq_r32(LTQ_FALCON_CHIPTYPE) & TYPE_MASK) >> TYPE_SHIFT;
- switch (type) {
- case 0:
- i->name = SOC_FALCON_D;
- break;
- case 1:
- i->name = SOC_FALCON_V;
- break;
- case 2:
- i->name = SOC_FALCON_M;
- break;
- default:
- i->name = SOC_FALCON;
- break;
- }
- i->type = SOC_TYPE_FALCON;
- break;
-
- default:
- unreachable();
- break;
- }
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/reset.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/reset.c
deleted file mode 100644
index cbcadc5c48..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/reset.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/pm.h>
-#include <asm/reboot.h>
-#include <linux/export.h>
-
-#include <lantiq_soc.h>
-
-/* CPU0 Reset Source Register */
-#define LTQ_SYS1_CPU0RS 0x0040
-/* reset cause mask */
-#define LTQ_CPU0RS_MASK 0x0003
-
-int
-ltq_reset_cause(void)
-{
- return ltq_sys1_r32(LTQ_SYS1_CPU0RS) & LTQ_CPU0RS_MASK;
-}
-EXPORT_SYMBOL_GPL(ltq_reset_cause);
-
-#define BOOT_REG_BASE (KSEG1 | 0x1F200000)
-#define BOOT_PW1_REG (BOOT_REG_BASE | 0x20)
-#define BOOT_PW2_REG (BOOT_REG_BASE | 0x24)
-#define BOOT_PW1 0x4C545100
-#define BOOT_PW2 0x0051544C
-
-#define WDT_REG_BASE (KSEG1 | 0x1F8803F0)
-#define WDT_PW1 0x00BE0000
-#define WDT_PW2 0x00DC0000
-
-static void
-ltq_machine_restart(char *command)
-{
- pr_notice("System restart\n");
- local_irq_disable();
-
- /* reboot magic */
- ltq_w32(BOOT_PW1, (void *)BOOT_PW1_REG); /* 'LTQ\0' */
- ltq_w32(BOOT_PW2, (void *)BOOT_PW2_REG); /* '\0QTL' */
- ltq_w32(0, (void *)BOOT_REG_BASE); /* reset Bootreg RVEC */
-
- /* watchdog magic */
- ltq_w32(WDT_PW1, (void *)WDT_REG_BASE);
- ltq_w32(WDT_PW2 |
- (0x3 << 26) | /* PWL */
- (0x2 << 24) | /* CLKDIV */
- (0x1 << 31) | /* enable */
- (1), /* reload */
- (void *)WDT_REG_BASE);
- unreachable();
-}
-
-static void
-ltq_machine_halt(void)
-{
- pr_notice("System halted.\n");
- local_irq_disable();
- unreachable();
-}
-
-static void
-ltq_machine_power_off(void)
-{
- pr_notice("Please turn off the power now.\n");
- local_irq_disable();
- unreachable();
-}
-
-static int __init
-mips_reboot_setup(void)
-{
- _machine_restart = ltq_machine_restart;
- _machine_halt = ltq_machine_halt;
- pm_power_off = ltq_machine_power_off;
- return 0;
-}
-
-arch_initcall(mips_reboot_setup);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/falcon/sysctrl.c b/target/linux/lantiq/files/arch/mips/lantiq/falcon/sysctrl.c
deleted file mode 100644
index f27d694826..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/falcon/sysctrl.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/ioport.h>
-#include <linux/export.h>
-#include <linux/clkdev.h>
-#include <asm/delay.h>
-
-#include <lantiq_soc.h>
-
-#include "devices.h"
-#include "../clk.h"
-
-/* infrastructure control register */
-#define SYS1_INFRAC 0x00bc
-/* Configuration fuses for drivers and pll */
-#define STATUS_CONFIG 0x0040
-
-/* GPE frequency selection */
-#define GPPC_OFFSET 24
-#define GPEFREQ_MASK 0x00000C0
-#define GPEFREQ_OFFSET 10
-/* Clock status register */
-#define LTQ_SYSCTL_CLKS 0x0000
-/* Clock enable register */
-#define LTQ_SYSCTL_CLKEN 0x0004
-/* Clock clear register */
-#define LTQ_SYSCTL_CLKCLR 0x0008
-/* Activation Status Register */
-#define LTQ_SYSCTL_ACTS 0x0020
-/* Activation Register */
-#define LTQ_SYSCTL_ACT 0x0024
-/* Deactivation Register */
-#define LTQ_SYSCTL_DEACT 0x0028
-/* reboot Register */
-#define LTQ_SYSCTL_RBT 0x002c
-/* CPU0 Clock Control Register */
-#define LTQ_SYS1_CPU0CC 0x0040
-/* clock divider bit */
-#define LTQ_CPU0CC_CPUDIV 0x0001
-
-static struct resource ltq_sysctl_res[] = {
- MEM_RES("sys1", LTQ_SYS1_BASE_ADDR, LTQ_SYS1_SIZE),
- MEM_RES("syseth", LTQ_SYS_ETH_BASE_ADDR, LTQ_SYS_ETH_SIZE),
- MEM_RES("sysgpe", LTQ_SYS_GPE_BASE_ADDR, LTQ_SYS_GPE_SIZE),
-};
-
-static struct resource ltq_status_res =
- MEM_RES("status", LTQ_STATUS_BASE_ADDR, LTQ_STATUS_SIZE);
-static struct resource ltq_ebu_res =
- MEM_RES("ebu", LTQ_EBU_BASE_ADDR, LTQ_EBU_SIZE);
-
-static void __iomem *ltq_sysctl[3];
-static void __iomem *ltq_status_membase;
-void __iomem *ltq_sys1_membase;
-void __iomem *ltq_ebu_membase;
-
-#define ltq_reg_w32(m, x, y) ltq_w32((x), ltq_sysctl[m] + (y))
-#define ltq_reg_r32(m, x) ltq_r32(ltq_sysctl[m] + (x))
-#define ltq_reg_w32_mask(m, clear, set, reg) \
- ltq_reg_w32(m, (ltq_reg_r32(m, reg) & ~(clear)) | (set), reg)
-
-#define ltq_status_w32(x, y) ltq_w32((x), ltq_status_membase + (y))
-#define ltq_status_r32(x) ltq_r32(ltq_status_membase + (x))
-
-static inline void
-ltq_sysctl_wait(struct clk *clk,
- unsigned int test, unsigned int reg)
-{
- int err = 1000000;
-
- do {} while (--err && ((ltq_reg_r32(clk->module, reg)
- & clk->bits) != test));
- if (!err)
- pr_err("module de/activation failed %d %08X %08X %08X\n",
- clk->module, clk->bits, test,
- ltq_reg_r32(clk->module, reg) & clk->bits);
-}
-
-static int
-ltq_sysctl_activate(struct clk *clk)
-{
- ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN);
- ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_ACT);
- ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS);
- return 0;
-}
-
-static void
-ltq_sysctl_deactivate(struct clk *clk)
-{
- ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR);
- ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_DEACT);
- ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_ACTS);
-}
-
-static int
-ltq_sysctl_clken(struct clk *clk)
-{
- ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN);
- ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_CLKS);
- return 0;
-}
-
-static void
-ltq_sysctl_clkdis(struct clk *clk)
-{
- ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR);
- ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_CLKS);
-}
-
-static void
-ltq_sysctl_reboot(struct clk *clk)
-{
- unsigned int act;
- unsigned int bits;
-
- act = ltq_reg_r32(clk->module, LTQ_SYSCTL_ACT);
- bits = ~act & clk->bits;
- if (bits != 0) {
- ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_CLKEN);
- ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_ACT);
- ltq_sysctl_wait(clk, bits, LTQ_SYSCTL_ACTS);
- }
- ltq_reg_w32(clk->module, act & clk->bits, LTQ_SYSCTL_RBT);
- ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS);
-}
-
-/* enable the ONU core */
-static void
-ltq_gpe_enable(void)
-{
- unsigned int freq;
- unsigned int status;
-
- /* if if the clock is already enabled */
- status = ltq_reg_r32(SYSCTL_SYS1, SYS1_INFRAC);
- if (status & (1 << (GPPC_OFFSET + 1)))
- return;
-
- if (ltq_status_r32(STATUS_CONFIG) == 0)
- freq = 1; /* use 625MHz on unfused chip */
- else
- freq = (ltq_status_r32(STATUS_CONFIG) &
- GPEFREQ_MASK) >>
- GPEFREQ_OFFSET;
-
- /* apply new frequency */
- ltq_reg_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1),
- freq << (GPPC_OFFSET + 2) , SYS1_INFRAC);
- udelay(1);
-
- /* enable new frequency */
- ltq_reg_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC);
- udelay(1);
-}
-
-static inline void
-clkdev_add_sys(const char *dev, unsigned int module,
- unsigned int bits)
-{
- struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
-
- clk->cl.dev_id = dev;
- clk->cl.con_id = NULL;
- clk->cl.clk = clk;
- clk->module = module;
- clk->bits = bits;
- clk->activate = ltq_sysctl_activate;
- clk->deactivate = ltq_sysctl_deactivate;
- clk->enable = ltq_sysctl_clken;
- clk->disable = ltq_sysctl_clkdis;
- clk->reboot = ltq_sysctl_reboot;
- clkdev_add(&clk->cl);
-}
-
-void __init
-ltq_soc_init(void)
-{
- int i;
-
- for (i = 0; i < 3; i++)
- ltq_sysctl[i] = ltq_remap_resource(&ltq_sysctl_res[i]);
-
- ltq_sys1_membase = ltq_sysctl[0];
- ltq_status_membase = ltq_remap_resource(&ltq_status_res);
- ltq_ebu_membase = ltq_remap_resource(&ltq_ebu_res);
-
- ltq_gpe_enable();
-
- /* get our 3 static rates for cpu, fpi and io clocks */
- if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV)
- clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M);
- else
- clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M);
-
- /* add our clock domains */
- clkdev_add_sys("falcon_gpio.0", SYSCTL_SYSETH, ACTS_PADCTRL0 | ACTS_P0);
- clkdev_add_sys("falcon_gpio.1", SYSCTL_SYS1, ACTS_PADCTRL1 | ACTS_P1);
- clkdev_add_sys("falcon_gpio.2", SYSCTL_SYSETH, ACTS_PADCTRL2 | ACTS_P2);
- clkdev_add_sys("falcon_gpio.3", SYSCTL_SYS1, ACTS_PADCTRL3 | ACTS_P3);
- clkdev_add_sys("falcon_gpio.4", SYSCTL_SYS1, ACTS_PADCTRL4 | ACTS_P4);
- clkdev_add_sys("ltq_asc.1", SYSCTL_SYS1, ACTS_ASC1_ACT);
- clkdev_add_sys("i2c-falcon.0", SYSCTL_SYS1, ACTS_I2C_ACT);
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/Kconfig b/target/linux/lantiq/files/arch/mips/lantiq/svip/Kconfig
deleted file mode 100644
index f351a189a7..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-if SOC_SVIP
-
-menu "Mips Machine"
-
-config LANTIQ_MACH_EASY33016
- bool "Easy33016"
- default y
-
-config LANTIQ_MACH_EASY336
- select SYS_SUPPORTS_LITTLE_ENDIAN
- bool "Easy336"
- default y
-
-endmenu
-
-endif
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/Makefile b/target/linux/lantiq/files/arch/mips/lantiq/svip/Makefile
deleted file mode 100644
index 405d652191..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-y := devices.o prom.o reset.o clk-svip.o gpio.o dma.o switchip_setup.o pms.o mux.o
-obj-$(CONFIG_LANTIQ_MACH_EASY33016) += mach-easy33016.o
-obj-$(CONFIG_LANTIQ_MACH_EASY336) += mach-easy336.o
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/clk-svip.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/clk-svip.c
deleted file mode 100644
index 4a14df509f..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/clk-svip.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/time.h>
-
-#include <asm/irq.h>
-#include <asm/div64.h>
-
-#include <lantiq_soc.h>
-#include <base_reg.h>
-#include <sys0_reg.h>
-#include <sys1_reg.h>
-#include <status_reg.h>
-
-static struct svip_reg_status *const status =
-(struct svip_reg_status *)LTQ_STATUS_BASE;
-static struct svip_reg_sys0 *const sys0 = (struct svip_reg_sys0 *)LTQ_SYS0_BASE;
-static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE;
-
-unsigned int ltq_svip_io_region_clock(void)
-{
- return 200000000; /* 200 MHz */
-}
-EXPORT_SYMBOL(ltq_svip_io_region_clock);
-
-unsigned int ltq_svip_cpu_hz(void)
-{
- /* Magic BootROM speed location... */
- if ((*(u32 *)0x9fc07ff0) == 1)
- return *(u32 *)0x9fc07ff4;
-
- if (STATUS_CONFIG_CLK_MODE_GET(status_r32(config)) == 1) {
- /* xT16 */
- return 393216000;
- } else {
- switch (SYS0_PLL1CR_PLLDIV_GET(sys0_r32(pll1cr))) {
- case 3:
- return 475000000;
- case 2:
- return 450000000;
- case 1:
- return 425000000;
- default:
- return 400000000;
- }
- }
-}
-EXPORT_SYMBOL(ltq_svip_cpu_hz);
-
-unsigned int ltq_svip_fpi_hz(void)
-{
- u32 fbs0_div[2] = {4, 8};
- u32 div;
-
- div = SYS1_FPICR_FPIDIV_GET(sys1_r32(fpicr));
- return ltq_svip_cpu_hz()/fbs0_div[div];
-}
-EXPORT_SYMBOL(ltq_svip_fpi_hz);
-
-unsigned int ltq_get_ppl_hz(void)
-{
- /* Magic BootROM speed location... */
- if ((*(u32 *)0x9fc07ff0) == 1)
- return *(u32 *)0x9fc07ff4;
-
- if (STATUS_CONFIG_CLK_MODE_GET(status_r32(config)) == 1) {
- /* xT16 */
- return 393216000;
- } else {
- switch (SYS0_PLL1CR_PLLDIV_GET(sys0_r32(pll1cr))) {
- case 3:
- return 475000000;
- case 2:
- return 450000000;
- case 1:
- return 425000000;
- default:
- return 400000000;
- }
- }
-}
-
-unsigned int ltq_get_fbs0_hz(void)
-{
- u32 fbs0_div[2] = {4, 8};
- u32 div;
-
- div = SYS1_FPICR_FPIDIV_GET(sys1_r32(fpicr));
- return ltq_get_ppl_hz()/fbs0_div[div];
-}
-EXPORT_SYMBOL(ltq_get_fbs0_hz);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.c
deleted file mode 100644
index 735b9419f7..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.c
+++ /dev/null
@@ -1,380 +0,0 @@
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mtd/physmap.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/etherdevice.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-
-#include <lantiq.h>
-
-#include <base_reg.h>
-#include <sys1_reg.h>
-#include <sys2_reg.h>
-#include <ebu_reg.h>
-
-#include "devices.h"
-
-#include <lantiq_soc.h>
-#include <svip_mux.h>
-#include <svip_pms.h>
-
-/* ASC */
-void __init svip_register_asc(int port)
-{
- switch (port) {
- case 0:
- ltq_register_asc(0);
- svip_sys1_clk_enable(SYS1_CLKENR_ASC0);
- break;
- case 1:
- ltq_register_asc(1);
- svip_sys1_clk_enable(SYS1_CLKENR_ASC1);
- break;
- default:
- break;
- };
-}
-
-/* Ethernet */
-static unsigned char svip_ethaddr[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
-
-static struct platform_device ltq_mii = {
- .name = "ifxmips_mii0",
- .dev = {
- .platform_data = svip_ethaddr,
- },
-};
-
-static int __init svip_set_ethaddr(char *str)
-{
- sscanf(str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
- &svip_ethaddr[0], &svip_ethaddr[1], &svip_ethaddr[2],
- &svip_ethaddr[3], &svip_ethaddr[4], &svip_ethaddr[5]);
- return 0;
-}
-__setup("ethaddr=", svip_set_ethaddr);
-
-void __init svip_register_eth(void)
-{
- if (!is_valid_ether_addr(svip_ethaddr))
- random_ether_addr(svip_ethaddr);
-
- platform_device_register(&ltq_mii);
- svip_sys1_clk_enable(SYS1_CLKENR_ETHSW);
-}
-
-/* Virtual Ethernet */
-static struct platform_device ltq_ve = {
- .name = "ifxmips_svip_ve",
-};
-
-void __init svip_register_virtual_eth(void)
-{
- platform_device_register(&ltq_ve);
-}
-
-/* SPI */
-static void __init ltq_register_ssc(int bus_num, unsigned long base, int irq_rx,
- int irq_tx, int irq_err, int irq_frm)
-{
- struct resource res[] = {
- {
- .name = "regs",
- .start = base,
- .end = base + 0x20 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "rx",
- .start = irq_rx,
- .flags = IORESOURCE_IRQ,
- }, {
- .name = "tx",
- .start = irq_tx,
- .flags = IORESOURCE_IRQ,
- }, {
- .name = "err",
- .start = irq_err,
- .flags = IORESOURCE_IRQ,
- }, {
- .name = "frm",
- .start = irq_frm,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- platform_device_register_simple("ifx_ssc", bus_num, res,
- ARRAY_SIZE(res));
-}
-
-static struct spi_board_info bdinfo[] __initdata = {
- {
- .modalias = "xt16",
- .mode = SPI_MODE_3,
- .irq = INT_NUM_IM5_IRL0 + 28,
- .max_speed_hz = 1000000,
- .bus_num = 0,
- .chip_select = 1,
- },
- {
- .modalias = "xt16",
- .mode = SPI_MODE_3,
- .irq = INT_NUM_IM5_IRL0 + 19,
- .max_speed_hz = 1000000,
- .bus_num = 0,
- .chip_select = 2,
- },
- {
- .modalias = "loop",
- .mode = SPI_MODE_0 | SPI_LOOP,
- .irq = -1,
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .chip_select = 3,
- },
-};
-
-void __init svip_register_spi(void)
-{
-
- ltq_register_ssc(0, LTQ_SSC0_BASE, INT_NUM_IM1_IRL0 + 6,
- INT_NUM_IM1_IRL0 + 7, INT_NUM_IM1_IRL0 + 8,
- INT_NUM_IM1_IRL0 + 9);
-
- ltq_register_ssc(1, LTQ_SSC1_BASE, INT_NUM_IM1_IRL0 + 10,
- INT_NUM_IM1_IRL0 + 11, INT_NUM_IM1_IRL0 + 12,
- INT_NUM_IM1_IRL0 + 13);
-
- spi_register_board_info(bdinfo, ARRAY_SIZE(bdinfo));
-
- svip_sys1_clk_enable(SYS1_CLKENR_SSC0 | SYS1_CLKENR_SSC1);
-}
-
-void __init svip_register_spi_flash(struct spi_board_info *bdinfo)
-{
- spi_register_board_info(bdinfo, 1);
-}
-
-/* GPIO */
-static struct platform_device ltq_gpio = {
- .name = "ifxmips_gpio",
-};
-
-void __init svip_register_gpio(void)
-{
- platform_device_register(&ltq_gpio);
-}
-
-/* MUX */
-static struct ltq_mux_settings ltq_mux_settings;
-
-static struct platform_device ltq_mux = {
- .name = "ltq_mux",
- .dev = {
- .platform_data = &ltq_mux_settings,
- }
-};
-
-void __init svip_register_mux(const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS],
- const struct ltq_mux_pin mux_p1[LTQ_MUX_P1_PINS],
- const struct ltq_mux_pin mux_p2[LTQ_MUX_P2_PINS],
- const struct ltq_mux_pin mux_p3[LTQ_MUX_P3_PINS],
- const struct ltq_mux_pin mux_p4[LTQ_MUX_P4_PINS])
-{
- ltq_mux_settings.mux_p0 = mux_p0;
- ltq_mux_settings.mux_p1 = mux_p1;
- ltq_mux_settings.mux_p2 = mux_p2;
- ltq_mux_settings.mux_p3 = mux_p3;
- ltq_mux_settings.mux_p4 = mux_p4;
-
- if (mux_p0)
- svip_sys1_clk_enable(SYS1_CLKENR_PORT0);
-
- if (mux_p1)
- svip_sys1_clk_enable(SYS1_CLKENR_PORT1);
-
- if (mux_p2)
- svip_sys1_clk_enable(SYS1_CLKENR_PORT2);
-
- if (mux_p3)
- svip_sys1_clk_enable(SYS1_CLKENR_PORT3);
-
- if (mux_p4)
- svip_sys2_clk_enable(SYS2_CLKENR_PORT4);
-
- platform_device_register(&ltq_mux);
-}
-
-/* NAND */
-#define NAND_ADDR_REGION_BASE (LTQ_EBU_SEG1_BASE)
-#define NAND_CLE_BIT (1 << 3)
-#define NAND_ALE_BIT (1 << 2)
-
-static struct svip_reg_ebu *const ebu = (struct svip_reg_ebu *)LTQ_EBU_BASE;
-
-static int svip_nand_probe(struct platform_device *pdev)
-{
- ebu_w32(LTQ_EBU_ADDR_SEL_0_BASE_VAL(CPHYSADDR(NAND_ADDR_REGION_BASE)
- >> 12)
- | LTQ_EBU_ADDR_SEL_0_MASK_VAL(15)
- | LTQ_EBU_ADDR_SEL_0_MRME_VAL(0)
- | LTQ_EBU_ADDR_SEL_0_REGEN_VAL(1),
- addr_sel_0);
-
- ebu_w32(LTQ_EBU_CON_0_WRDIS_VAL(0)
- | LTQ_EBU_CON_0_ADSWP_VAL(1)
- | LTQ_EBU_CON_0_AGEN_VAL(0x00)
- | LTQ_EBU_CON_0_SETUP_VAL(1)
- | LTQ_EBU_CON_0_WAIT_VAL(0x00)
- | LTQ_EBU_CON_0_WINV_VAL(0)
- | LTQ_EBU_CON_0_PW_VAL(0x00)
- | LTQ_EBU_CON_0_ALEC_VAL(0)
- | LTQ_EBU_CON_0_BCGEN_VAL(0x01)
- | LTQ_EBU_CON_0_WAITWRC_VAL(1)
- | LTQ_EBU_CON_0_WAITRDC_VAL(1)
- | LTQ_EBU_CON_0_HOLDC_VAL(1)
- | LTQ_EBU_CON_0_RECOVC_VAL(0)
- | LTQ_EBU_CON_0_CMULT_VAL(0x01),
- con_0);
-
- /*
- * ECC disabled
- * CLE, ALE and CS are pulse, all other signal are latches based
- * CLE and ALE are active high, PRE, WP, SE and CS/CE are active low
- * OUT_CS_S is disabled
- * NAND mode is disabled
- */
- ebu_w32(LTQ_EBU_NAND_CON_ECC_ON_VAL(0)
- | LTQ_EBU_NAND_CON_LAT_EN_VAL(0x38)
- | LTQ_EBU_NAND_CON_OUT_CS_S_VAL(0)
- | LTQ_EBU_NAND_CON_IN_CS_S_VAL(0)
- | LTQ_EBU_NAND_CON_PRE_P_VAL(1)
- | LTQ_EBU_NAND_CON_WP_P_VAL(1)
- | LTQ_EBU_NAND_CON_SE_P_VAL(1)
- | LTQ_EBU_NAND_CON_CS_P_VAL(1)
- | LTQ_EBU_NAND_CON_CLE_P_VAL(0)
- | LTQ_EBU_NAND_CON_ALE_P_VAL(0)
- | LTQ_EBU_NAND_CON_CSMUX_E_VAL(0)
- | LTQ_EBU_NAND_CON_NANDMODE_VAL(0),
- nand_con);
-
- return 0;
-}
-
-static void svip_nand_hwcontrol(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- unsigned long adr;
- /* Coming here means to change either the enable state or
- * the address for controlling ALE or CLE */
-
- /* NAND_NCE: Select the chip by setting nCE to low.
- * This is done in CON register */
- if (ctrl & NAND_NCE)
- ebu_w32_mask(0, LTQ_EBU_NAND_CON_NANDMODE_VAL(1),
- nand_con);
- else
- ebu_w32_mask(LTQ_EBU_NAND_CON_NANDMODE_VAL(1),
- 0, nand_con);
-
- /* The addressing of CLE or ALE is done via different addresses.
- We are now changing the address depending on the given action
- SVIPs NAND_CLE_BIT = (1 << 3), NAND_CLE = 0x02
- NAND_ALE_BIT = (1 << 2) = NAND_ALE (0x04) */
- adr = (unsigned long)this->IO_ADDR_W;
- adr &= ~(NAND_CLE_BIT | NAND_ALE_BIT);
- adr |= (ctrl & NAND_CLE) << 2 | (ctrl & NAND_ALE);
- this->IO_ADDR_W = (void __iomem *)adr;
- }
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
-}
-
-static int svip_nand_ready(struct mtd_info *mtd)
-{
- return (ebu_r32(nand_wait) & 0x01) == 0x01;
-}
-
-static inline void svip_nand_wait(void)
-{
- static const int nops = 150;
- int i;
-
- for (i = 0; i < nops; i++)
- asm("nop");
-}
-
-static void svip_nand_write_buf(struct mtd_info *mtd,
- const u_char *buf, int len)
-{
- int i;
- struct nand_chip *this = mtd->priv;
-
- for (i = 0; i < len; i++) {
- writeb(buf[i], this->IO_ADDR_W);
- svip_nand_wait();
- }
-}
-
-static void svip_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
- int i;
- struct nand_chip *this = mtd->priv;
-
- for (i = 0; i < len; i++) {
- buf[i] = readb(this->IO_ADDR_R);
- svip_nand_wait();
- }
-}
-
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
-static struct platform_nand_data svip_flash_nand_data = {
- .chip = {
- .nr_chips = 1,
- .part_probe_types = part_probes,
- },
- .ctrl = {
- .probe = svip_nand_probe,
- .cmd_ctrl = svip_nand_hwcontrol,
- .dev_ready = svip_nand_ready,
- .write_buf = svip_nand_write_buf,
- .read_buf = svip_nand_read_buf,
- }
-};
-
-static struct resource svip_nand_resources[] = {
- MEM_RES("nand", LTQ_FLASH_START, LTQ_FLASH_MAX),
-};
-
-static struct platform_device svip_flash_nand = {
- .name = "gen_nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(svip_nand_resources),
- .resource = svip_nand_resources,
- .dev = {
- .platform_data = &svip_flash_nand_data,
- },
-};
-
-void __init svip_register_nand(void)
-{
- platform_device_register(&svip_flash_nand);
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.h b/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.h
deleted file mode 100644
index a064e67ec1..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/devices.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _SVIP_DEVICES_H__
-#define _SVIP_DEVICES_H__
-
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <svip_mux.h>
-#include "../devices.h"
-
-extern void __init svip_register_asc(int port);
-extern void __init svip_register_eth(void);
-extern void __init svip_register_virtual_eth(void);
-extern void __init svip_register_spi(void);
-extern void __init svip_register_spi_flash(struct spi_board_info *bdinfo);
-extern void __init svip_register_gpio(void);
-extern void __init svip_register_mux(const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS],
- const struct ltq_mux_pin mux_p1[LTQ_MUX_P1_PINS],
- const struct ltq_mux_pin mux_p2[LTQ_MUX_P2_PINS],
- const struct ltq_mux_pin mux_p3[LTQ_MUX_P3_PINS],
- const struct ltq_mux_pin mux_p4[LTQ_MUX_P4_PINS]);
-extern void __init svip_register_nand(void);
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/dma.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/dma.c
deleted file mode 100644
index 7464be1bd5..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/dma.c
+++ /dev/null
@@ -1,1206 +0,0 @@
-/*
- ** Copyright (C) 2005 Wu Qi Ming <Qi-Ming.Wu@infineon.com>
- **
- ** This program is free software; you can redistribute it and/or modify
- ** it under the terms of the GNU General Public License as published by
- ** the Free Software Foundation; either version 2 of the License, or
- ** (at your option) any later version.
- **
- ** This program is distributed in the hope that it will be useful,
- ** but WITHOUT ANY WARRANTY; without even the implied warranty of
- ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- ** GNU General Public License for more details.
- **
- ** You should have received a copy of the GNU General Public License
- ** along with this program; if not, write to the Free Software
- ** Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-/*
- * Description:
- * Driver for SVIP DMA
- * Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com]
- * Created: 26-September-2005
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/selection.h>
-#include <linux/kmod.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/semaphore.h>
-
-#include <base_reg.h>
-#include <mps_reg.h>
-#include <dma_reg.h>
-#include <svip_dma.h>
-#include <lantiq_soc.h>
-#include <irq.h>
-#include <sys1_reg.h>
-
-static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE;
-static struct svip_reg_dma *const dma = (struct svip_reg_dma *)LTQ_DMA_BASE;
-static struct svip_reg_mbs *const mbs = (struct svip_reg_mbs *)LTQ_MBS_BASE;
-
-#define DRV_NAME "ltq_dma"
-extern void ltq_mask_and_ack_irq(struct irq_data *data);
-extern void ltq_enable_irq(struct irq_data *data);
-
-static inline void mask_and_ack_irq(unsigned int irq_nr)
-{
- static int i = 0;
- struct irq_data data;
- data.irq = irq_nr;
- if ((i < 2) && (irq_nr == 137)) {
- printk("eth delay hack\n");
- i++;
- }
- ltq_mask_and_ack_irq(&data);
-}
-
-static inline void svip_enable_irq(unsigned int irq_nr)
-{
- struct irq_data data;
- data.irq = irq_nr;
- ltq_enable_irq(&data);
-}
-
-#define DMA_EMSG(fmt, args...) \
- printk(KERN_ERR "%s: " fmt, __func__, ## args)
-
-static inline void mbs_grab(void)
-{
- while (mbs_r32(mbsr0) != 0);
-}
-
-static inline void mbs_release(void)
-{
- mbs_w32(0, mbsr0);
- asm("sync");
-}
-
-/* max ports connecting to dma */
-#define LTQ_MAX_DMA_DEVICE_NUM ARRAY_SIZE(dma_devices)
-/* max dma channels */
-#define LTQ_MAX_DMA_CHANNEL_NUM ARRAY_SIZE(dma_chan)
-
-/* bytes per descriptor */
-#define DMA_DESCR_SIZE 8
-
-#define DMA_DESCR_CH_SIZE (DMA_DESCR_NUM * DMA_DESCR_SIZE)
-#define DMA_DESCR_TOTAL_SIZE (LTQ_MAX_DMA_CHANNEL_NUM * DMA_DESCR_CH_SIZE)
-#define DMA_DESCR_MEM_PAGES ((DMA_DESCR_TOTAL_SIZE / PAGE_SIZE) + \
- (((DMA_DESCR_TOTAL_SIZE % PAGE_SIZE) > 0)))
-
-/* budget for interrupt handling */
-#define DMA_INT_BUDGET 100
-/* set the correct counter value here! */
-#define DMA_POLL_COUNTER 32
-
-struct proc_dir_entry *g_dma_dir;
-
-/* device_name | max_rx_chan_num | max_tx_chan_num | drop_enable */
-struct dma_device_info dma_devices[] = {
- { "SW", 4, 4, 0 },
- { "DEU", 1, 1, 0 },
- { "SSC0", 1, 1, 0 },
- { "SSC1", 1, 1, 0 },
- { "MCTRL", 1, 1, 0 },
- { "PCM0", 1, 1, 0 },
- { "PCM1", 1, 1, 0 },
- { "PCM2", 1, 1, 0 },
- { "PCM3", 1, 1, 0 }
-};
-
-/* *dma_dev | dir | pri | irq | rel_chan_no */
-struct dma_channel_info dma_chan[] = {
- { &dma_devices[0], DIR_RX, 0, INT_NUM_IM4_IRL0 + 0, 0 },
- { &dma_devices[0], DIR_TX, 0, INT_NUM_IM4_IRL0 + 1, 0 },
- { &dma_devices[0], DIR_RX, 1, INT_NUM_IM4_IRL0 + 2, 1 },
- { &dma_devices[0], DIR_TX, 1, INT_NUM_IM4_IRL0 + 3, 1 },
- { &dma_devices[0], DIR_RX, 2, INT_NUM_IM4_IRL0 + 4, 2 },
- { &dma_devices[0], DIR_TX, 2, INT_NUM_IM4_IRL0 + 5, 2 },
- { &dma_devices[0], DIR_RX, 3, INT_NUM_IM4_IRL0 + 6, 3 },
- { &dma_devices[0], DIR_TX, 3, INT_NUM_IM4_IRL0 + 7, 3 },
- { &dma_devices[1], DIR_RX, 0, INT_NUM_IM4_IRL0 + 8, 0 },
- { &dma_devices[1], DIR_TX, 0, INT_NUM_IM4_IRL0 + 9, 0 },
- { &dma_devices[2], DIR_RX, 0, INT_NUM_IM4_IRL0 + 10, 0 },
- { &dma_devices[2], DIR_TX, 0, INT_NUM_IM4_IRL0 + 11, 0 },
- { &dma_devices[3], DIR_RX, 0, INT_NUM_IM4_IRL0 + 12, 0 },
- { &dma_devices[3], DIR_TX, 0, INT_NUM_IM4_IRL0 + 13, 0 },
- { &dma_devices[4], DIR_RX, 0, INT_NUM_IM4_IRL0 + 14, 0 },
- { &dma_devices[4], DIR_TX, 0, INT_NUM_IM4_IRL0 + 15, 0 },
- { &dma_devices[5], DIR_RX, 0, INT_NUM_IM4_IRL0 + 16, 0 },
- { &dma_devices[5], DIR_TX, 0, INT_NUM_IM4_IRL0 + 17, 0 },
- { &dma_devices[6], DIR_RX, 1, INT_NUM_IM3_IRL0 + 18, 0 },
- { &dma_devices[6], DIR_TX, 1, INT_NUM_IM3_IRL0 + 19, 0 },
- { &dma_devices[7], DIR_RX, 2, INT_NUM_IM4_IRL0 + 20, 0 },
- { &dma_devices[7], DIR_TX, 2, INT_NUM_IM4_IRL0 + 21, 0 },
- { &dma_devices[8], DIR_RX, 3, INT_NUM_IM4_IRL0 + 22, 0 },
- { &dma_devices[8], DIR_TX, 3, INT_NUM_IM4_IRL0 + 23, 0 }
-};
-
-u64 *g_desc_list[DMA_DESCR_MEM_PAGES];
-
-volatile u32 g_dma_int_status = 0;
-
-/* 0 - not in process, 1 - in process */
-volatile int g_dma_in_process;
-
-int ltq_dma_init(void);
-void do_dma_tasklet(unsigned long);
-DECLARE_TASKLET(dma_tasklet, do_dma_tasklet, 0);
-irqreturn_t dma_interrupt(int irq, void *dev_id);
-
-u8 *common_buffer_alloc(int len, int *byte_offset, void **opt)
-{
- u8 *buffer = kmalloc(len * sizeof(u8), GFP_KERNEL);
- *byte_offset = 0;
- return buffer;
-}
-
-void common_buffer_free(u8 *dataptr, void *opt)
-{
- kfree(dataptr);
-}
-
-void enable_ch_irq(struct dma_channel_info *ch)
-{
- int chan_no = (int)(ch - dma_chan);
- unsigned long flag;
- u32 val;
-
- if (ch->dir == DIR_RX)
- val = DMA_CIE_DESCPT | DMA_CIE_DUR;
- else
- val = DMA_CIE_DESCPT;
-
- local_irq_save(flag);
- mbs_grab();
- dma_w32(chan_no, cs);
- dma_w32(val, cie);
- dma_w32_mask(0, 1 << chan_no, irnen);
- mbs_release();
- local_irq_restore(flag);
-
- svip_enable_irq(ch->irq);
-}
-
-void disable_ch_irq(struct dma_channel_info *ch)
-{
- unsigned long flag;
- int chan_no = (int)(ch - dma_chan);
-
- local_irq_save(flag);
- g_dma_int_status &= ~(1 << chan_no);
- mbs_grab();
- dma_w32(chan_no, cs);
- dma_w32(0, cie);
- mbs_release();
- dma_w32_mask(1 << chan_no, 0, irnen);
- local_irq_restore(flag);
-
- mask_and_ack_irq(ch->irq);
-}
-
-int open_chan(struct dma_channel_info *ch)
-{
- unsigned long flag;
- int j;
- int chan_no = (int)(ch - dma_chan);
- u8 *buffer;
- int byte_offset;
- struct rx_desc *rx_desc_p;
- struct tx_desc *tx_desc_p;
-
- if (ch->control == LTQ_DMA_CH_ON)
- return -1;
-
- if (ch->dir == DIR_RX) {
- for (j = 0; j < ch->desc_len; j++) {
- rx_desc_p = (struct rx_desc *)ch->desc_base+j;
- buffer = ch->dma_dev->buffer_alloc(ch->packet_size,
- &byte_offset,
- (void *)&ch->opt[j]);
- if (!buffer)
- return -ENOBUFS;
-
- rx_desc_p->data_pointer = (u32)CPHYSADDR((u32)buffer);
- rx_desc_p->status.word = 0;
- rx_desc_p->status.field.byte_offset = byte_offset;
- rx_desc_p->status.field.data_length = ch->packet_size;
- rx_desc_p->status.field.own = DMA_OWN;
- }
- } else {
- for (j = 0; j < ch->desc_len; j++) {
- tx_desc_p = (struct tx_desc *)ch->desc_base + j;
- tx_desc_p->data_pointer = 0;
- tx_desc_p->status.word = 0;
- }
- }
- ch->xfer_cnt = 0;
-
- local_irq_save(flag);
- mbs_grab();
- dma_w32(chan_no, cs);
- dma_w32(ch->desc_len, cdlen);
- dma_w32(0x7e, cis);
- dma_w32(DMA_CCTRL_TXWGT_VAL(ch->tx_weight)
- | DMA_CCTRL_CLASS_VAL(ch->pri)
- | (ch->dir == DIR_RX ? DMA_CCTRL_ON_OFF : 0), cctrl);
- mbs_release();
- ch->control = LTQ_DMA_CH_ON;
- local_irq_restore(flag);
-
- if (request_irq(ch->irq, dma_interrupt,
- IRQF_DISABLED, "dma-core", (void *)ch) != 0) {
- printk(KERN_ERR "error, cannot get dma_irq!\n");
- return -EFAULT;
- }
-
- enable_ch_irq(ch);
- return 0;
-}
-
-int close_chan(struct dma_channel_info *ch)
-{
- unsigned long flag;
- int j;
- int chan_no = (int)(ch - dma_chan);
- struct rx_desc *desc_p;
-
- if (ch->control == LTQ_DMA_CH_OFF)
- return -1;
-
- local_irq_save(flag);
- mbs_grab();
- dma_w32(chan_no, cs);
- dma_w32_mask(DMA_CCTRL_ON_OFF, 0, cctrl);
- mbs_release();
- disable_ch_irq(ch);
- free_irq(ch->irq, (void *)ch);
- ch->control = LTQ_DMA_CH_OFF;
- local_irq_restore(flag);
-
- /* free descriptors in use */
- for (j = 0; j < ch->desc_len; j++) {
- desc_p = (struct rx_desc *)ch->desc_base+j;
- if ((desc_p->status.field.own == CPU_OWN &&
- desc_p->status.field.c) ||
- (desc_p->status.field.own == DMA_OWN)) {
- if (desc_p->data_pointer) {
- ch->dma_dev->buffer_free((u8 *)__va(desc_p->data_pointer),
- (void *)ch->opt[j]);
- desc_p->data_pointer = (u32)NULL;
- }
- }
- }
-
- return 0;
-}
-
-int reset_chan(struct dma_channel_info *ch)
-{
- unsigned long flag;
- int val;
- int chan_no = (int)(ch - dma_chan);
-
- close_chan(ch);
-
- local_irq_save(flag);
- mbs_grab();
- dma_w32(chan_no, cs);
- dma_w32_mask(0, DMA_CCTRL_RST, cctrl);
- mbs_release();
- local_irq_restore(flag);
-
- do {
- local_irq_save(flag);
- mbs_grab();
- dma_w32(chan_no, cs);
- val = dma_r32(cctrl);
- mbs_release();
- local_irq_restore(flag);
- } while (val & DMA_CCTRL_RST);
-
- return 0;
-}
-
-static inline void rx_chan_intr_handler(int chan_no)
-{
- struct dma_device_info *dma_dev = (struct dma_device_info *)
- dma_chan[chan_no].dma_dev;
- struct dma_channel_info *ch = &dma_chan[chan_no];
- struct rx_desc *rx_desc_p;
- unsigned long flag;
- u32 val;
-
- local_irq_save(flag);
- mbs_grab();
- dma_w32(chan_no, cs);
- val = dma_r32(cis);
- dma_w32(DMA_CIS_DESCPT, cis);
- mbs_release();
-
- /* handle command complete interrupt */
- rx_desc_p = (struct rx_desc *)ch->desc_base + ch->curr_desc;
- if ((rx_desc_p->status.word & (DMA_DESC_OWN_DMA | DMA_DESC_CPT_SET)) ==
- DMA_DESC_CPT_SET) {
- local_irq_restore(flag);
- /* Every thing is correct, then we inform the upper layer */
- dma_dev->current_rx_chan = ch->rel_chan_no;
- if (dma_dev->intr_handler)
- dma_dev->intr_handler(dma_dev, RCV_INT);
- ch->weight--;
- } else {
- g_dma_int_status &= ~(1 << chan_no);
- local_irq_restore(flag);
- svip_enable_irq(dma_chan[chan_no].irq);
- }
-}
-
-static inline void tx_chan_intr_handler(int chan_no)
-{
- struct dma_device_info *dma_dev = (struct dma_device_info *)
- dma_chan[chan_no].dma_dev;
- struct dma_channel_info *ch = &dma_chan[chan_no];
- struct tx_desc *tx_desc_p;
- unsigned long flag;
-
- local_irq_save(flag);
- mbs_grab();
- dma_w32(chan_no, cs);
- dma_w32(DMA_CIS_DESCPT, cis);
- mbs_release();
-
- tx_desc_p = (struct tx_desc *)ch->desc_base+ch->prev_desc;
- if ((tx_desc_p->status.word & (DMA_DESC_OWN_DMA | DMA_DESC_CPT_SET)) ==
- DMA_DESC_CPT_SET) {
- local_irq_restore(flag);
-
- dma_dev->buffer_free((u8 *)__va(tx_desc_p->data_pointer),
- ch->opt[ch->prev_desc]);
- memset(tx_desc_p, 0, sizeof(struct tx_desc));
- dma_dev->current_tx_chan = ch->rel_chan_no;
- if (dma_dev->intr_handler)
- dma_dev->intr_handler(dma_dev, TRANSMIT_CPT_INT);
- ch->weight--;
-
- ch->prev_desc = (ch->prev_desc + 1) % (ch->desc_len);
- } else {
- g_dma_int_status &= ~(1 << chan_no);
- local_irq_restore(flag);
- svip_enable_irq(dma_chan[chan_no].irq);
- }
-}
-
-void do_dma_tasklet(unsigned long unused)
-{
- int i;
- int chan_no = 0;
- int budget = DMA_INT_BUDGET;
- int weight = 0;
- unsigned long flag;
-
- while (g_dma_int_status) {
- if (budget-- < 0) {
- tasklet_schedule(&dma_tasklet);
- return;
- }
- chan_no = -1;
- weight = 0;
- /* WFQ algorithm to select the channel */
- for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) {
- if (g_dma_int_status & (1 << i) &&
- dma_chan[i].weight > 0) {
- if (dma_chan[i].weight > weight) {
- chan_no = i;
- weight = dma_chan[chan_no].weight;
- }
- }
- }
- if (chan_no >= 0) {
- if (dma_chan[chan_no].dir == DIR_RX)
- rx_chan_intr_handler(chan_no);
- else
- tx_chan_intr_handler(chan_no);
- } else {
- /* reset all the channels */
- for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++)
- dma_chan[i].weight = dma_chan[i].default_weight;
- }
- }
-
- local_irq_save(flag);
- g_dma_in_process = 0;
- if (g_dma_int_status) {
- g_dma_in_process = 1;
- tasklet_schedule(&dma_tasklet);
- }
- local_irq_restore(flag);
-}
-
-irqreturn_t dma_interrupt(int irq, void *dev_id)
-{
- struct dma_channel_info *ch;
- int chan_no = 0;
-
- ch = (struct dma_channel_info *)dev_id;
- chan_no = (int)(ch - dma_chan);
-
- if ((unsigned)chan_no >= LTQ_MAX_DMA_CHANNEL_NUM) {
- printk(KERN_ERR "error: dma_interrupt irq=%d chan_no=%d\n",
- irq, chan_no);
- }
-
- g_dma_int_status |= 1 << chan_no;
- dma_w32(1 << chan_no, irncr);
- mask_and_ack_irq(irq);
-
- if (!g_dma_in_process) {
- g_dma_in_process = 1;
- tasklet_schedule(&dma_tasklet);
- }
-
- return IRQ_RETVAL(1);
-}
-
-struct dma_device_info *dma_device_reserve(char *dev_name)
-{
- int i;
-
- ltq_dma_init();
- for (i = 0; i < LTQ_MAX_DMA_DEVICE_NUM; i++) {
- if (strcmp(dev_name, dma_devices[i].device_name) == 0) {
- if (dma_devices[i].reserved)
- return NULL;
- dma_devices[i].reserved = 1;
- break;
- }
- }
-
- if (i == LTQ_MAX_DMA_DEVICE_NUM)
- return NULL;
-
- return &dma_devices[i];
-}
-EXPORT_SYMBOL(dma_device_reserve);
-
-int dma_device_release(struct dma_device_info *dma_dev)
-{
- dma_dev->reserved = 0;
-
- return 0;
-}
-EXPORT_SYMBOL(dma_device_release);
-
-int dma_device_register(struct dma_device_info *dma_dev)
-{
- int port_no = (int)(dma_dev - dma_devices);
- int txbl, rxbl;
- unsigned long flag;
-
- switch (dma_dev->tx_burst_len) {
- case 8:
- txbl = 3;
- break;
- case 4:
- txbl = 2;
- break;
- default:
- txbl = 1;
- break;
- }
-
- switch (dma_dev->rx_burst_len) {
- case 8:
- rxbl = 3;
- break;
- case 4:
- rxbl = 2;
- break;
- default:
- rxbl = 1;
- }
-
- local_irq_save(flag);
- mbs_grab();
- dma_w32(port_no, ps);
- dma_w32(DMA_PCTRL_TXWGT_VAL(dma_dev->tx_weight)
- | DMA_PCTRL_TXENDI_VAL(dma_dev->tx_endianness_mode)
- | DMA_PCTRL_RXENDI_VAL(dma_dev->rx_endianness_mode)
- | DMA_PCTRL_PDEN_VAL(dma_dev->drop_enable)
- | DMA_PCTRL_TXBL_VAL(txbl)
- | DMA_PCTRL_RXBL_VAL(rxbl), pctrl);
- mbs_release();
- local_irq_restore(flag);
-
- return 0;
-}
-EXPORT_SYMBOL(dma_device_register);
-
-int dma_device_unregister(struct dma_device_info *dma_dev)
-{
- int i;
- int port_no = (int)(dma_dev - dma_devices);
- unsigned long flag;
-
- /* flush memcopy module; has no effect for other ports */
- local_irq_save(flag);
- mbs_grab();
- dma_w32(port_no, ps);
- dma_w32_mask(0, DMA_PCTRL_GPC, pctrl);
- mbs_release();
- local_irq_restore(flag);
-
- for (i = 0; i < dma_dev->max_tx_chan_num; i++)
- reset_chan(dma_dev->tx_chan[i]);
-
- for (i = 0; i < dma_dev->max_rx_chan_num; i++)
- reset_chan(dma_dev->rx_chan[i]);
-
- return 0;
-}
-EXPORT_SYMBOL(dma_device_unregister);
-
-/**
- * Read Packet from DMA Rx channel.
- * The function gets the data from the current rx descriptor assigned
- * to the passed DMA device and passes it back to the caller.
- * The function is called in the context of DMA interrupt.
- * In detail the following actions are done:
- * - get current receive descriptor
- * - allocate memory via allocation callback function
- * - pass data from descriptor to allocated memory
- * - update channel weight
- * - release descriptor
- * - update current descriptor position
- *
- * \param *dma_dev - pointer to DMA device structure
- * \param **dataptr - pointer to received data
- * \param **opt
- * \return packet length - length of received data
- * \ingroup Internal
- */
-int dma_device_read(struct dma_device_info *dma_dev, u8 **dataptr, void **opt)
-{
- u8 *buf;
- int len;
- int byte_offset = 0;
- void *p = NULL;
-
- struct dma_channel_info *ch =
- dma_dev->rx_chan[dma_dev->current_rx_chan];
-
- struct rx_desc *rx_desc_p;
-
- /* get the rx data first */
- rx_desc_p = (struct rx_desc *)ch->desc_base+ch->curr_desc;
- buf = (u8 *)__va(rx_desc_p->data_pointer);
- *(u32 *)dataptr = (u32)buf;
- len = rx_desc_p->status.field.data_length;
-#ifndef CONFIG_MIPS_UNCACHED
- dma_cache_inv((unsigned long)buf, len);
-#endif
- if (opt)
- *(int *)opt = (int)ch->opt[ch->curr_desc];
-
- /* replace with a new allocated buffer */
- buf = dma_dev->buffer_alloc(ch->packet_size, &byte_offset, &p);
- if (buf) {
- ch->opt[ch->curr_desc] = p;
-
- wmb();
- rx_desc_p->data_pointer = (u32)CPHYSADDR((u32)buf);
- rx_desc_p->status.word = (DMA_OWN << 31) \
- |(byte_offset << 23) \
- | ch->packet_size;
-
- wmb();
- } else {
- *(u32 *)dataptr = 0;
- if (opt)
- *(int *)opt = 0;
- }
-
- ch->xfer_cnt++;
- /* increase the curr_desc pointer */
- ch->curr_desc++;
- if (ch->curr_desc == ch->desc_len)
- ch->curr_desc = 0;
- /* return the length of the received packet */
- return len;
-}
-EXPORT_SYMBOL(dma_device_read);
-
-/**
- * Write Packet through DMA Tx channel to peripheral.
- *
- * \param *dma_dev - pointer to DMA device structure
- * \param *dataptr - pointer to data to be sent
- * \param len - amount of data bytes to be sent
- * \param *opt
- * \return len - length of transmitted data
- * \ingroup Internal
- */
-int dma_device_write(struct dma_device_info *dma_dev, u8 *dataptr, int len,
- void *opt)
-{
- unsigned long flag;
- u32 byte_offset;
- struct dma_channel_info *ch;
- int chan_no;
- struct tx_desc *tx_desc_p;
- local_irq_save(flag);
-
- ch = dma_dev->tx_chan[dma_dev->current_tx_chan];
- chan_no = (int)(ch - dma_chan);
-
- if (ch->control == LTQ_DMA_CH_OFF) {
- local_irq_restore(flag);
- printk(KERN_ERR "%s: dma channel %d not enabled!\n",
- __func__, chan_no);
- return 0;
- }
-
- tx_desc_p = (struct tx_desc *)ch->desc_base+ch->curr_desc;
- /* Check whether this descriptor is available */
- if (tx_desc_p->status.word & (DMA_DESC_OWN_DMA | DMA_DESC_CPT_SET)) {
- /* if not , the tell the upper layer device */
- dma_dev->intr_handler(dma_dev, TX_BUF_FULL_INT);
- local_irq_restore(flag);
- return 0;
- }
- ch->opt[ch->curr_desc] = opt;
- /* byte offset----to adjust the starting address of the data buffer,
- * should be multiple of the burst length.*/
- byte_offset = ((u32)CPHYSADDR((u32)dataptr)) %
- (dma_dev->tx_burst_len * 4);
-#ifndef CONFIG_MIPS_UNCACHED
- dma_cache_wback((unsigned long)dataptr, len);
- wmb();
-#endif
- tx_desc_p->data_pointer = (u32)CPHYSADDR((u32)dataptr) - byte_offset;
- wmb();
- tx_desc_p->status.word = (DMA_OWN << 31)
- | DMA_DESC_SOP_SET
- | DMA_DESC_EOP_SET
- | (byte_offset << 23)
- | len;
- wmb();
-
- if (ch->xfer_cnt == 0) {
- mbs_grab();
- dma_w32(chan_no, cs);
- dma_w32_mask(0, DMA_CCTRL_ON_OFF, cctrl);
- mbs_release();
- }
-
- ch->xfer_cnt++;
- ch->curr_desc++;
- if (ch->curr_desc == ch->desc_len)
- ch->curr_desc = 0;
-
- local_irq_restore(flag);
- return len;
-}
-EXPORT_SYMBOL(dma_device_write);
-
-/**
- * Display descriptor list via proc file
- *
- * \param chan_no - logical channel number
- * \ingroup Internal
- */
-int desc_list_proc_read(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- int len = 0;
- int i;
- static int chan_no;
- u32 *p;
-
- if ((chan_no == 0) && (offset > count)) {
- *eof = 1;
- return 0;
- }
-
- if (chan_no != 0) {
- *start = buf;
- } else {
- buf = buf + offset;
- *start = buf;
- }
-
- p = (u32 *)dma_chan[chan_no].desc_base;
-
- if (dma_chan[chan_no].dir == DIR_RX)
- len += sprintf(buf + len,
- "channel %d %s Rx descriptor list:\n",
- chan_no, dma_chan[chan_no].dma_dev->device_name);
- else
- len += sprintf(buf + len,
- "channel %d %s Tx descriptor list:\n",
- chan_no, dma_chan[chan_no].dma_dev->device_name);
- len += sprintf(buf + len,
- " no address data pointer command bits "
- "(Own, Complete, SoP, EoP, Offset) \n");
- len += sprintf(buf + len,
- "----------------------------------------------"
- "-----------------------------------\n");
- for (i = 0; i < dma_chan[chan_no].desc_len; i++) {
- len += sprintf(buf + len, "%3d ", i);
- len += sprintf(buf + len, "0x%08x ", (u32)(p + (i * 2)));
- len += sprintf(buf + len, "%08x ", *(p + (i * 2 + 1)));
- len += sprintf(buf + len, "%08x ", *(p + (i * 2)));
-
- if (*(p + (i * 2)) & 0x80000000)
- len += sprintf(buf + len, "D ");
- else
- len += sprintf(buf + len, "C ");
- if (*(p + (i * 2)) & 0x40000000)
- len += sprintf(buf + len, "C ");
- else
- len += sprintf(buf + len, "c ");
- if (*(p + (i * 2)) & 0x20000000)
- len += sprintf(buf + len, "S ");
- else
- len += sprintf(buf + len, "s ");
- if (*(p + (i * 2)) & 0x10000000)
- len += sprintf(buf + len, "E ");
- else
- len += sprintf(buf + len, "e ");
-
- /* byte offset is different for rx and tx descriptors*/
- if (dma_chan[chan_no].dir == DIR_RX) {
- len += sprintf(buf + len, "%01x ",
- (*(p + (i * 2)) & 0x01800000) >> 23);
- } else {
- len += sprintf(buf + len, "%02x ",
- (*(p + (i * 2)) & 0x0F800000) >> 23);
- }
-
- if (dma_chan[chan_no].curr_desc == i)
- len += sprintf(buf + len, "<- CURR");
-
- if (dma_chan[chan_no].prev_desc == i)
- len += sprintf(buf + len, "<- PREV");
-
- len += sprintf(buf + len, "\n");
-
- }
-
- len += sprintf(buf + len, "\n");
- chan_no++;
- if (chan_no > LTQ_MAX_DMA_CHANNEL_NUM - 1)
- chan_no = 0;
-
- *eof = 1;
- return len;
-}
-
-/**
- * Displays the weight of all DMA channels via proc file
- *
- *
- *
- * \param *buf
- * \param **start
- * \param offset
- * \param count
- * \param *eof
- * \param *data
- * \return len - amount of bytes written to file
- */
-int channel_weight_proc_read(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- int i;
- int len = 0;
- len += sprintf(buf + len, "Qos dma channel weight list\n");
- len += sprintf(buf + len, "channel_num default_weight "
- "current_weight device Tx/Rx\n");
- len += sprintf(buf + len, "---------------------------"
- "---------------------------------\n");
- for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) {
- struct dma_channel_info *ch = &dma_chan[i];
-
- if (ch->dir == DIR_RX) {
- len += sprintf(buf + len,
- " %2d %08x "
- "%08x %10s Rx\n",
- i, ch->default_weight, ch->weight,
- ch->dma_dev->device_name);
- } else {
- len += sprintf(buf + len,
- " %2d %08x "
- "%08x %10s Tx\n",
- i, ch->default_weight, ch->weight,
- ch->dma_dev->device_name);
- }
- }
-
- return len;
-}
-
-/**
- * Provides DMA Register Content to proc file
- * This function reads the content of general DMA Registers, DMA Channel
- * Registers and DMA Port Registers and performs a structures output to the
- * DMA proc file
- *
- * \param *buf
- * \param **start
- * \param offset
- * \param count
- * \param *eof
- * \param *data
- * \return len - amount of bytes written to file
- */
-int dma_register_proc_read(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- int len = 0;
- int i;
- int limit = count;
- unsigned long flags;
- static int blockcount;
- static int channel_no;
-
- if ((blockcount == 0) && (offset > count)) {
- *eof = 1;
- return 0;
- }
-
- switch (blockcount) {
- case 0:
- len += sprintf(buf + len, "\nGeneral DMA Registers\n");
- len += sprintf(buf + len, "-------------------------"
- "----------------\n");
- len += sprintf(buf + len, "CLC= %08x\n", dma_r32(clc));
- len += sprintf(buf + len, "ID= %08x\n", dma_r32(id));
- len += sprintf(buf + len, "DMA_CPOLL= %08x\n", dma_r32(cpoll));
- len += sprintf(buf + len, "DMA_CS= %08x\n", dma_r32(cs));
- len += sprintf(buf + len, "DMA_PS= %08x\n", dma_r32(ps));
- len += sprintf(buf + len, "DMA_IRNEN= %08x\n", dma_r32(irnen));
- len += sprintf(buf + len, "DMA_IRNCR= %08x\n", dma_r32(irncr));
- len += sprintf(buf + len, "DMA_IRNICR= %08x\n",
- dma_r32(irnicr));
- len += sprintf(buf + len, "\nDMA Channel Registers\n");
- blockcount = 1;
- return len;
- break;
- case 1:
- /* If we had an overflow start at beginning of buffer
- * otherwise use offset */
- if (channel_no != 0) {
- *start = buf;
- } else {
- buf = buf + offset;
- *start = buf;
- }
-
- local_irq_save(flags);
- for (i = channel_no; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) {
- struct dma_channel_info *ch = &dma_chan[i];
-
- if (len + 300 > limit) {
- local_irq_restore(flags);
- channel_no = i;
- blockcount = 1;
- return len;
- }
- len += sprintf(buf + len, "----------------------"
- "-------------------\n");
- if (ch->dir == DIR_RX) {
- len += sprintf(buf + len,
- "Channel %d - Device %s Rx\n",
- i, ch->dma_dev->device_name);
- } else {
- len += sprintf(buf + len,
- "Channel %d - Device %s Tx\n",
- i, ch->dma_dev->device_name);
- }
- dma_w32(i, cs);
- len += sprintf(buf + len, "DMA_CCTRL= %08x\n",
- dma_r32(cctrl));
- len += sprintf(buf + len, "DMA_CDBA= %08x\n",
- dma_r32(cdba));
- len += sprintf(buf + len, "DMA_CIE= %08x\n",
- dma_r32(cie));
- len += sprintf(buf + len, "DMA_CIS= %08x\n",
- dma_r32(cis));
- len += sprintf(buf + len, "DMA_CDLEN= %08x\n",
- dma_r32(cdlen));
- }
- local_irq_restore(flags);
- blockcount = 2;
- channel_no = 0;
- return len;
- break;
- case 2:
- *start = buf;
- /*
- * display port dependent registers
- */
- len += sprintf(buf + len, "\nDMA Port Registers\n");
- len += sprintf(buf + len,
- "-----------------------------------------\n");
- local_irq_save(flags);
- for (i = 0; i < LTQ_MAX_DMA_DEVICE_NUM; i++) {
- dma_w32(i, ps);
- len += sprintf(buf + len,
- "Port %d DMA_PCTRL= %08x\n",
- i, dma_r32(pctrl));
- }
- local_irq_restore(flags);
- blockcount = 0;
- *eof = 1;
- return len;
- break;
- }
-
- blockcount = 0;
- *eof = 1;
- return 0;
-}
-
-/**
- * Open Method of DMA Device Driver
- * This function increments the device driver's use counter.
- *
- *
- * \param
- * \return
- */
-static int dma_open(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-/**
- * Release Method of DMA Device driver.
- * This function decrements the device driver's use counter.
- *
- *
- * \param
- * \return
- */
-static int dma_release(struct inode *inode, struct file *file)
-{
- /* release the resources */
- return 0;
-}
-
-/**
- * Ioctl Interface to DMA Module
- *
- * \param None
- * \return 0 - initialization successful
- * <0 - failed initialization
- */
-static long dma_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int result = 0;
- /* TODO: add some user controled functions here */
- return result;
-}
-
-const static struct file_operations dma_fops = {
- .owner = THIS_MODULE,
- .open = dma_open,
- .release = dma_release,
- .unlocked_ioctl = dma_ioctl,
-};
-
-void map_dma_chan(struct dma_channel_info *map)
-{
- int i;
-
- /* assign default values for channel settings */
- for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) {
- dma_chan[i].byte_offset = 0;
- dma_chan[i].open = &open_chan;
- dma_chan[i].close = &close_chan;
- dma_chan[i].reset = &reset_chan;
- dma_chan[i].enable_irq = enable_ch_irq;
- dma_chan[i].disable_irq = disable_ch_irq;
- dma_chan[i].tx_weight = 1;
- dma_chan[i].control = 0;
- dma_chan[i].default_weight = LTQ_DMA_CH_DEFAULT_WEIGHT;
- dma_chan[i].weight = dma_chan[i].default_weight;
- dma_chan[i].curr_desc = 0;
- dma_chan[i].prev_desc = 0;
- }
-
- /* assign default values for port settings */
- for (i = 0; i < LTQ_MAX_DMA_DEVICE_NUM; i++) {
- /*set default tx channel number to be one*/
- dma_devices[i].num_tx_chan = 1;
- /*set default rx channel number to be one*/
- dma_devices[i].num_rx_chan = 1;
- dma_devices[i].buffer_alloc = common_buffer_alloc;
- dma_devices[i].buffer_free = common_buffer_free;
- dma_devices[i].intr_handler = NULL;
- dma_devices[i].tx_burst_len = 4;
- dma_devices[i].rx_burst_len = 4;
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- dma_devices[i].tx_endianness_mode = 0;
- dma_devices[i].rx_endianness_mode = 0;
-#else
- dma_devices[i].tx_endianness_mode = 3;
- dma_devices[i].rx_endianness_mode = 3;
-#endif
- }
-}
-
-void dma_chip_init(void)
-{
- int i;
-
- sys1_w32(SYS1_CLKENR_DMA, clkenr);
- wmb();
- /* reset DMA */
- dma_w32(DMA_CTRL_RST, ctrl);
- wmb();
- /* disable all the interrupts first */
- dma_w32(0, irnen);
-
- /* enable polling for all channels */
- dma_w32(DMA_CPOLL_EN | DMA_CPOLL_CNT_VAL(DMA_POLL_COUNTER), cpoll);
-
- /****************************************************/
- for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++)
- disable_ch_irq(&dma_chan[i]);
-}
-
-int ltq_dma_init(void)
-{
- int result = 0;
- int i;
- unsigned long flag;
- static int dma_initialized;
-
- if (dma_initialized == 1)
- return 0;
- dma_initialized = 1;
-
- result = register_chrdev(DMA_MAJOR, "dma-core", &dma_fops);
- if (result) {
- DMA_EMSG("cannot register device dma-core!\n");
- return result;
- }
-
- dma_chip_init();
- map_dma_chan(dma_chan);
-
- /* allocate DMA memory for buffer descriptors */
- for (i = 0; i < DMA_DESCR_MEM_PAGES; i++) {
- g_desc_list[i] = (u64 *)__get_free_page(GFP_DMA);
- if (g_desc_list[i] == NULL) {
- DMA_EMSG("no memory for desriptor\n");
- return -ENOMEM;
- }
- g_desc_list[i] = (u64 *)KSEG1ADDR(g_desc_list[i]);
- memset(g_desc_list[i], 0, PAGE_SIZE);
- }
-
- for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) {
- int page_index, ch_per_page;
- /* cross-link relative channels of a port to
- * corresponding absolute channels */
- if (dma_chan[i].dir == DIR_RX) {
- ((struct dma_device_info *)(dma_chan[i].dma_dev))->
- rx_chan[dma_chan[i].rel_chan_no] = &dma_chan[i];
- } else {
- ((struct dma_device_info *)(dma_chan[i].dma_dev))->
- tx_chan[dma_chan[i].rel_chan_no] = &dma_chan[i];
- }
- dma_chan[i].abs_chan_no = i;
-
- page_index = i * DMA_DESCR_CH_SIZE / PAGE_SIZE;
- ch_per_page = PAGE_SIZE / DMA_DESCR_CH_SIZE +
- ((PAGE_SIZE % DMA_DESCR_CH_SIZE) > 0);
- dma_chan[i].desc_base =
- (u32)g_desc_list[page_index] +
- (i - page_index*ch_per_page) * DMA_DESCR_NUM*8;
- dma_chan[i].curr_desc = 0;
- dma_chan[i].desc_len = DMA_DESCR_NUM;
-
- local_irq_save(flag);
- mbs_grab();
- dma_w32(i, cs);
- dma_w32((u32)CPHYSADDR(dma_chan[i].desc_base), cdba);
- mbs_release();
- local_irq_restore(flag);
- }
-
- g_dma_dir = proc_mkdir("driver/" DRV_NAME, NULL);
-
- create_proc_read_entry("dma_register",
- 0,
- g_dma_dir,
- dma_register_proc_read,
- NULL);
-
- create_proc_read_entry("g_desc_list",
- 0,
- g_dma_dir,
- desc_list_proc_read,
- NULL);
-
- create_proc_read_entry("channel_weight",
- 0,
- g_dma_dir,
- channel_weight_proc_read,
- NULL);
-
- printk(KERN_NOTICE "SVIP DMA engine initialized\n");
-
- return 0;
-}
-
-/**
- * Cleanup DMA device
- * This function releases all resources used by the DMA device driver on
- * module removal.
- *
- *
- * \param None
- * \return Nothing
- */
-void dma_cleanup(void)
-{
- int i;
- unregister_chrdev(DMA_MAJOR, "dma-core");
-
- for (i = 0; i < DMA_DESCR_MEM_PAGES; i++)
- free_page(KSEG0ADDR((unsigned long)g_desc_list[i]));
- remove_proc_entry("channel_weight", g_dma_dir);
- remove_proc_entry("g_desc_list", g_dma_dir);
- remove_proc_entry("dma_register", g_dma_dir);
- remove_proc_entry("driver/" DRV_NAME, NULL);
- /* release the resources */
- for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++)
- free_irq(dma_chan[i].irq, (void *)&dma_chan[i]);
-}
-
-arch_initcall(ltq_dma_init);
-
-MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/gpio.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/gpio.c
deleted file mode 100644
index 398339201e..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/gpio.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
-#include <linux/init.h>
-#include <linux/ioctl.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/kobject.h>
-#include <linux/workqueue.h>
-#include <linux/skbuff.h>
-#include <linux/netlink.h>
-#include <linux/platform_device.h>
-#include <net/sock.h>
-#include <linux/uaccess.h>
-#include <linux/version.h>
-#include <linux/semaphore.h>
-
-#include <lantiq_soc.h>
-#include <svip_mux.h>
-#include <base_reg.h>
-#include <port_reg.h>
-
-#define DRV_NAME "ifxmips_gpio"
-
-int gpio_to_irq(unsigned int gpio)
-{
- return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_to_irq);
-
-int irq_to_gpio(unsigned int gpio)
-{
- return -EINVAL;
-}
-EXPORT_SYMBOL(irq_to_gpio);
-
-struct ltq_port_base {
- struct svip_reg_port *base;
- u32 pins;
-};
-
-/* Base addresses for ports */
-static const struct ltq_port_base ltq_port_base[] = {
- { (struct svip_reg_port *)LTQ_PORT_P0_BASE, 20 },
- { (struct svip_reg_port *)LTQ_PORT_P1_BASE, 20 },
- { (struct svip_reg_port *)LTQ_PORT_P2_BASE, 19 },
- { (struct svip_reg_port *)LTQ_PORT_P3_BASE, 20 },
- { (struct svip_reg_port *)LTQ_PORT_P4_BASE, 24 }
-};
-
-#define MAX_PORTS ARRAY_SIZE(ltq_port_base)
-#define PINS_PER_PORT(port) (ltq_port_base[port].pins)
-
-static inline
-void ltq_port_set_exintcr0(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->exintcr0) | (1 << pin),
- ltq_port_base[port].base->exintcr0);
-}
-
-static inline
-void ltq_port_clear_exintcr0(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->exintcr0) & ~(1 << pin),
- ltq_port_base[port].base->exintcr0);
-}
-
-static inline
-void ltq_port_set_exintcr1(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->exintcr1) | (1 << pin),
- ltq_port_base[port].base->exintcr1);
-}
-
-static inline
-void ltq_port_clear_exintcr1(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->exintcr1) & ~(1 << pin),
- ltq_port_base[port].base->exintcr1);
-}
-
-static inline
-void ltq_port_set_irncfg(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->irncfg) | (1 << pin),
- ltq_port_base[port].base->irncfg);
-}
-
-static inline
-void ltq_port_clear_irncfg(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->irncfg) & ~(1 << pin),
- ltq_port_base[port].base->irncfg);
-}
-
-static inline
-void ltq_port_set_irnen(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(1 << pin, ltq_port_base[port].base->irnenset);
-}
-
-static inline
-void ltq_port_clear_irnen(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(1 << pin, ltq_port_base[port].base->irnenclr);
-}
-
-static inline
-void ltq_port_set_dir_out(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->dir) | (1 << pin),
- ltq_port_base[port].base->dir);
-}
-
-static inline
-void ltq_port_set_dir_in(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->dir) & ~(1 << pin),
- ltq_port_base[port].base->dir);
-}
-
-static inline
-void ltq_port_set_output(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->out) | (1 << pin),
- ltq_port_base[port].base->out);
-}
-
-static inline
-void ltq_port_clear_output(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->out) & ~(1 << pin),
- ltq_port_base[port].base->out);
-}
-
-static inline
-int ltq_port_get_input(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return -EINVAL;
-
- return (port_r32(ltq_port_base[port].base->in) & (1 << pin)) == 0;
-}
-
-static inline
-void ltq_port_set_puen(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->puen) | (1 << pin),
- ltq_port_base[port].base->puen);
-}
-
-static inline
-void ltq_port_clear_puen(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->puen) & ~(1 << pin),
- ltq_port_base[port].base->puen);
-}
-
-static inline
-void ltq_port_set_altsel0(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->altsel0) | (1 << pin),
- ltq_port_base[port].base->altsel0);
-}
-
-static inline
-void ltq_port_clear_altsel0(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->altsel0) & ~(1 << pin),
- ltq_port_base[port].base->altsel0);
-}
-
-static inline
-void ltq_port_set_altsel1(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->altsel1) | (1 << pin),
- ltq_port_base[port].base->altsel1);
-}
-
-static inline
-void ltq_port_clear_altsel1(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return;
-
- port_w32(port_r32(ltq_port_base[port].base->altsel1) & ~(1 << pin),
- ltq_port_base[port].base->altsel1);
-}
-
-void ltq_gpio_configure(int port, int pin, bool dirin, bool puen,
- bool altsel0, bool altsel1)
-{
- if (dirin)
- ltq_port_set_dir_in(port, pin);
- else
- ltq_port_set_dir_out(port, pin);
-
- if (puen)
- ltq_port_set_puen(port, pin);
- else
- ltq_port_clear_puen(port, pin);
-
- if (altsel0)
- ltq_port_set_altsel0(port, pin);
- else
- ltq_port_clear_altsel0(port, pin);
-
- if (altsel1)
- ltq_port_set_altsel1(port, pin);
- else
- ltq_port_clear_altsel1(port, pin);
-}
-
-int ltq_port_get_dir(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return -EINVAL;
-
- return (port_r32(ltq_port_base[port].base->dir) & (1 << pin)) != 0;
-}
-
-int ltq_port_get_puden(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return -EINVAL;
-
- return (port_r32(ltq_port_base[port].base->puen) & (1 << pin)) != 0;
-}
-
-int ltq_port_get_altsel0(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return -EINVAL;
-
- return (port_r32(ltq_port_base[port].base->altsel0) & (1 << pin)) != 0;
-}
-
-int ltq_port_get_altsel1(unsigned int port, unsigned int pin)
-{
- if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port))
- return -EINVAL;
-
- return (port_r32(ltq_port_base[port].base->altsel1) & (1 << pin)) != 0;
-}
-
-struct ltq_gpio_port {
- struct gpio_chip gpio_chip;
- unsigned int irq_base;
- unsigned int chained_irq;
-};
-
-static struct ltq_gpio_port ltq_gpio_port[MAX_PORTS];
-
-static int gpio_exported;
-static int __init gpio_export_setup(char *str)
-{
- get_option(&str, &gpio_exported);
- return 1;
-}
-__setup("gpio_exported=", gpio_export_setup);
-
-static inline unsigned int offset2port(unsigned int offset)
-{
- unsigned int i;
- unsigned int prev = 0;
-
- for (i = 0; i < ARRAY_SIZE(ltq_port_base); i++) {
- if (offset >= prev &&
- offset < prev + ltq_port_base[i].pins)
- return i;
-
- prev = ltq_port_base[i].pins;
- }
-
- return 0;
-}
-
-static inline unsigned int offset2pin(unsigned int offset)
-{
- unsigned int i;
- unsigned int prev = 0;
-
- for (i = 0; i < ARRAY_SIZE(ltq_port_base); i++) {
- if (offset >= prev &&
- offset < prev + ltq_port_base[i].pins)
- return offset - prev;
-
- prev = ltq_port_base[i].pins;
- }
-
- return 0;
-}
-
-static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
-{
- ltq_port_set_dir_in(offset2port(offset), offset2pin(offset));
- return 0;
-}
-
-static int ltq_gpio_direction_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- ltq_port_set_dir_out(offset2port(offset), offset2pin(offset));
- return 0;
-}
-
-static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset)
-{
- return ltq_port_get_input(offset2port(offset), offset2pin(offset));
-}
-
-static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
-{
- if (value)
- ltq_port_set_output(offset2port(offset), offset2pin(offset));
- else
- ltq_port_clear_output(offset2port(offset), offset2pin(offset));
-}
-
-static int svip_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
- return 0;
-}
-
-static void ltq_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
-}
-
-static int ltq_gpio_probe(struct platform_device *pdev)
-{
- int ret = 0;
- struct ltq_gpio_port *gpio_port;
-
- if (pdev->id >= MAX_PORTS)
- return -ENODEV;
-
- gpio_port = &ltq_gpio_port[pdev->id];
- gpio_port->gpio_chip.label = "ltq-gpio";
-
- gpio_port->gpio_chip.direction_input = ltq_gpio_direction_input;
- gpio_port->gpio_chip.direction_output = ltq_gpio_direction_output;
- gpio_port->gpio_chip.get = ltq_gpio_get;
- gpio_port->gpio_chip.set = ltq_gpio_set;
- gpio_port->gpio_chip.request = svip_gpio_request;
- gpio_port->gpio_chip.free = ltq_gpio_free;
- gpio_port->gpio_chip.base = 100 * pdev->id;
- gpio_port->gpio_chip.ngpio = 32;
- gpio_port->gpio_chip.dev = &pdev->dev;
- gpio_port->gpio_chip.exported = gpio_exported;
-
- ret = gpiochip_add(&gpio_port->gpio_chip);
- if (ret < 0) {
- dev_err(&pdev->dev, "Could not register gpiochip %d, %d\n",
- pdev->id, ret);
- goto err;
- }
- platform_set_drvdata(pdev, gpio_port);
-
- return 0;
-
-err:
- return ret;
-}
-
-static int ltq_gpio_remove(struct platform_device *pdev)
-{
- struct ltq_gpio_port *gpio_port = platform_get_drvdata(pdev);
- int ret;
-
- ret = gpiochip_remove(&gpio_port->gpio_chip);
-
- return ret;
-}
-
-static struct platform_driver ltq_gpio_driver = {
- .probe = ltq_gpio_probe,
- .remove = __devexit_p(ltq_gpio_remove),
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-int __init ltq_gpio_init(void)
-{
- int ret = platform_driver_register(&ltq_gpio_driver);
- if (ret)
- printk(KERN_INFO DRV_NAME
- ": Error registering platform driver!");
- return ret;
-}
-
-postcore_initcall(ltq_gpio_init);
-
-/**
- * Convert interrupt number to corresponding port/pin pair
- * Returns the port/pin pair serving the selected external interrupt;
- * needed since mapping not linear.
- *
- * \param exint External interrupt number
- * \param port Pointer for resulting port
- * \param pin Pointer for resutling pin
- * \return -EINVAL Invalid exint
- * \return 0 port/pin updated
- * \ingroup API
- */
-static int ltq_exint2port(u32 exint, int *port, int *pin)
-{
- if ((exint >= 0) && (exint <= 10)) {
- *port = 0;
- *pin = exint + 7;
- } else if ((exint >= 11) && (exint <= 14)) {
- *port = 1;
- *pin = 18 - (exint - 11) ;
- } else if (exint == 15) {
- *port = 1;
- *pin = 19;
- } else if (exint == 16) {
- *port = 0;
- *pin = 19;
- } else {
- return -EINVAL;
- }
- return 0;
-}
-
-/**
- * Enable external interrupt.
- * This function enables an external interrupt and sets the given mode.
- * valid values for mode are:
- * - 0 = Interrupt generation disabled
- * - 1 = Interrupt on rising edge
- * - 2 = Interrupt on falling edge
- * - 3 = Interrupt on rising and falling edge
- * - 5 = Interrupt on high level detection
- * - 6 = Interrupt on low level detection
- *
- * \param exint - Number of external interrupt
- * \param mode - Trigger mode
- * \return 0 on success
- * \ingroup API
- */
-int ifx_enable_external_int(u32 exint, u32 mode)
-{
- int port;
- int pin;
-
- if ((mode < 0) || (mode > 6))
- return -EINVAL;
-
- if (ltq_exint2port(exint, &port, &pin))
- return -EINVAL;
-
- ltq_port_clear_exintcr0(port, pin);
- ltq_port_clear_exintcr1(port, pin);
- ltq_port_clear_irncfg(port, pin);
-
- if (mode & 0x1)
- ltq_port_set_exintcr0(port, pin);
- if (mode & 0x2)
- ltq_port_set_exintcr1(port, pin);
- if (mode & 0x4)
- ltq_port_set_irncfg(port, pin);
-
- ltq_port_set_irnen(port, pin);
- return 0;
-}
-EXPORT_SYMBOL(ifx_enable_external_int);
-
-/**
- * Disable external interrupt.
- * This function disables an external interrupt and sets mode to 0x00.
- *
- * \param exint - Number of external interrupt
- * \return 0 on success
- * \ingroup API
- */
-int ifx_disable_external_int(u32 exint)
-{
- int port;
- int pin;
-
- if (ltq_exint2port(exint, &port, &pin))
- return -EINVAL;
-
- ltq_port_clear_irnen(port, pin);
- return 0;
-}
-EXPORT_SYMBOL(ifx_disable_external_int);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy33016.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy33016.c
deleted file mode 100644
index c5993efd6d..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy33016.c
+++ /dev/null
@@ -1,73 +0,0 @@
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio_buttons.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include "../machtypes.h"
-
-#include <sys1_reg.h>
-#include <sys2_reg.h>
-#include <svip_pms.h>
-
-#include "devices.h"
-
-static const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS] = {
- LTQ_MUX_P0_0_SSC0_MTSR,
- LTQ_MUX_P0_1_SSC0_MRST,
- LTQ_MUX_P0_2_SSC0_SCLK,
- LTQ_MUX_P0_3_SSC1_MTSR,
- LTQ_MUX_P0_4_SSC1_MRST,
- LTQ_MUX_P0_5_SSC1_SCLK,
- LTQ_MUX_P0_6_SSC0_CS0,
- LTQ_MUX_P0_7_SSC0_CS1,
- LTQ_MUX_P0_8_SSC0_CS2,
- LTQ_MUX_P0_9,
- LTQ_MUX_P0_10,
- LTQ_MUX_P0_11_EXINT4,
- LTQ_MUX_P0_12,
- LTQ_MUX_P0_13,
- LTQ_MUX_P0_14_ASC0_TXD,
- LTQ_MUX_P0_15_ASC0_RXD,
- LTQ_MUX_P0_16_EXINT9,
- LTQ_MUX_P0_17_EXINT10,
- LTQ_MUX_P0_18_EJ_BRKIN,
- LTQ_MUX_P0_19_EXINT16
-};
-
-static void __init easy33016_init(void)
-{
- svip_sys1_clk_enable(SYS1_CLKENR_L2C |
- SYS1_CLKENR_DDR2 |
- SYS1_CLKENR_SMI2 |
- SYS1_CLKENR_SMI1 |
- SYS1_CLKENR_SMI0 |
- SYS1_CLKENR_FMI0 |
- SYS1_CLKENR_DMA |
- SYS1_CLKENR_SSC0 |
- SYS1_CLKENR_SSC1 |
- SYS1_CLKENR_EBU);
-
- svip_sys2_clk_enable(SYS2_CLKENR_HWSYNC |
- SYS2_CLKENR_MBS |
- SYS2_CLKENR_SWINT);
-
- svip_register_mux(mux_p0, NULL, NULL, NULL, NULL);
- svip_register_asc(0);
- svip_register_eth();
- svip_register_virtual_eth();
- ltq_register_wdt();
- svip_register_gpio();
- svip_register_spi();
- svip_register_nand();
-}
-
-MIPS_MACHINE(LANTIQ_MACH_EASY33016,
- "EASY33016",
- "EASY33016",
- easy33016_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy336.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy336.c
deleted file mode 100644
index 460bb7d85d..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/mach-easy336.c
+++ /dev/null
@@ -1,221 +0,0 @@
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio_buttons.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include "../machtypes.h"
-
-#include <sys1_reg.h>
-#include <sys2_reg.h>
-#include <svip_pms.h>
-
-#include "devices.h"
-
-static struct mtd_partition easy336_sflash_partitions[] = {
- {
- .name = "SPI flash",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- },
-};
-
-static struct flash_platform_data easy336_sflash_data = {
- .name = "m25p32",
- .parts = (void *)&easy336_sflash_partitions,
- .nr_parts = ARRAY_SIZE(easy336_sflash_partitions),
- .type = "m25p32",
-};
-
-static struct spi_board_info bdinfo[] __initdata = {
- {
- .modalias = "m25p80",
- .platform_data = &easy336_sflash_data,
- .mode = SPI_MODE_0,
- .irq = -1,
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 0,
- }
-};
-
-static struct mtd_partition easy336_partitions[] = {
- {
- .name = "uboot",
- .offset = 0x0,
- .size = 0x40000,
- },
- {
- .name = "uboot_env",
- .offset = 0x40000,
- .size = 0x20000,
- },
- {
- .name = "linux",
- .offset = 0x60000,
- .size = 0x1a0000,
- },
- {
- .name = "rootfs",
- .offset = 0x200000,
- .size = 0x500000,
- },
-};
-
-static struct physmap_flash_data easy336_flash_data = {
- .nr_parts = ARRAY_SIZE(easy336_partitions),
- .parts = easy336_partitions,
-};
-
-static const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS] = {
- LTQ_MUX_P0_0_SSC0_MTSR,
- LTQ_MUX_P0_1_SSC0_MRST,
- LTQ_MUX_P0_2_SSC0_SCLK,
- LTQ_MUX_P0_3_SSC1_MTSR,
- LTQ_MUX_P0_4_SSC1_MRST,
- LTQ_MUX_P0_5_SSC1_SCLK,
- LTQ_MUX_P0_6_SSC0_CS0,
- LTQ_MUX_P0_7_SSC0_CS1,
- LTQ_MUX_P0_8_SSC0_CS2,
- LTQ_MUX_P0_9_SSC0_CS3,
- LTQ_MUX_P0_10_SSC0_CS4,
- LTQ_MUX_P0_11_SSC0_CS5,
- LTQ_MUX_P0_12_EXINT5,
- LTQ_MUX_P0_13_EXINT6,
- LTQ_MUX_P0_14_ASC0_TXD,
- LTQ_MUX_P0_15_ASC0_RXD,
- LTQ_MUX_P0_16_EXINT9,
- LTQ_MUX_P0_17_EXINT10,
- LTQ_MUX_P0_18_EJ_BRKIN,
- LTQ_MUX_P0_19_EXINT16
-};
-
-static const struct ltq_mux_pin mux_p2[LTQ_MUX_P2_PINS] = {
- LTQ_MUX_P2_0_EBU_A0,
- LTQ_MUX_P2_1_EBU_A1,
- LTQ_MUX_P2_2_EBU_A2,
- LTQ_MUX_P2_3_EBU_A3,
- LTQ_MUX_P2_4_EBU_A4,
- LTQ_MUX_P2_5_EBU_A5,
- LTQ_MUX_P2_6_EBU_A6,
- LTQ_MUX_P2_7_EBU_A7,
- LTQ_MUX_P2_8_EBU_A8,
- LTQ_MUX_P2_9_EBU_A9,
- LTQ_MUX_P2_10_EBU_A10,
- LTQ_MUX_P2_11_EBU_A11,
- LTQ_MUX_P2_12_EBU_RD,
- LTQ_MUX_P2_13_EBU_WR,
- LTQ_MUX_P2_14_EBU_ALE,
- LTQ_MUX_P2_15_EBU_WAIT,
- LTQ_MUX_P2_16_EBU_RDBY,
- LTQ_MUX_P2_17_EBU_BC0,
- LTQ_MUX_P2_18_EBU_BC1
-};
-
-static const struct ltq_mux_pin mux_p3[LTQ_MUX_P3_PINS] = {
- LTQ_MUX_P3_0_EBU_AD0,
- LTQ_MUX_P3_1_EBU_AD1,
- LTQ_MUX_P3_2_EBU_AD2,
- LTQ_MUX_P3_3_EBU_AD3,
- LTQ_MUX_P3_4_EBU_AD4,
- LTQ_MUX_P3_5_EBU_AD5,
- LTQ_MUX_P3_6_EBU_AD6,
- LTQ_MUX_P3_7_EBU_AD7,
- LTQ_MUX_P3_8_EBU_AD8,
- LTQ_MUX_P3_9_EBU_AD9,
- LTQ_MUX_P3_10_EBU_AD10,
- LTQ_MUX_P3_11_EBU_AD11,
- LTQ_MUX_P3_12_EBU_AD12,
- LTQ_MUX_P3_13_EBU_AD13,
- LTQ_MUX_P3_14_EBU_AD14,
- LTQ_MUX_P3_15_EBU_AD15,
- LTQ_MUX_P3_16_EBU_CS0,
- LTQ_MUX_P3_17_EBU_CS1,
- LTQ_MUX_P3_18_EBU_CS2,
- LTQ_MUX_P3_19_EBU_CS3
-};
-
-static void __init easy336_init_common(void)
-{
- svip_sys1_clk_enable(SYS1_CLKENR_L2C |
- SYS1_CLKENR_DDR2 |
- SYS1_CLKENR_SMI2 |
- SYS1_CLKENR_SMI1 |
- SYS1_CLKENR_SMI0 |
- SYS1_CLKENR_FMI0 |
- SYS1_CLKENR_DMA |
- SYS1_CLKENR_GPTC |
- SYS1_CLKENR_EBU);
-
- svip_sys2_clk_enable(SYS2_CLKENR_HWSYNC |
- SYS2_CLKENR_MBS |
- SYS2_CLKENR_SWINT |
- SYS2_CLKENR_HWACC3 |
- SYS2_CLKENR_HWACC2 |
- SYS2_CLKENR_HWACC1 |
- SYS2_CLKENR_HWACC0 |
- SYS2_CLKENR_SIF7 |
- SYS2_CLKENR_SIF6 |
- SYS2_CLKENR_SIF5 |
- SYS2_CLKENR_SIF4 |
- SYS2_CLKENR_SIF3 |
- SYS2_CLKENR_SIF2 |
- SYS2_CLKENR_SIF1 |
- SYS2_CLKENR_SIF0 |
- SYS2_CLKENR_DFEV7 |
- SYS2_CLKENR_DFEV6 |
- SYS2_CLKENR_DFEV5 |
- SYS2_CLKENR_DFEV4 |
- SYS2_CLKENR_DFEV3 |
- SYS2_CLKENR_DFEV2 |
- SYS2_CLKENR_DFEV1 |
- SYS2_CLKENR_DFEV0);
-
- svip_register_mux(mux_p0, NULL, mux_p2, mux_p3, NULL);
- svip_register_asc(0);
- svip_register_eth();
- svip_register_virtual_eth();
- /* ltq_register_wdt(); - conflicts with lq_switch */
- svip_register_gpio();
- svip_register_spi();
- ltq_register_tapi();
-}
-
-static void __init easy336_init(void)
-{
- easy336_init_common();
- ltq_register_nor(&easy336_flash_data);
-}
-
-static void __init easy336sf_init(void)
-{
- easy336_init_common();
- svip_register_spi_flash(bdinfo);
-}
-
-static void __init easy336nand_init(void)
-{
- easy336_init_common();
- svip_register_nand();
-}
-
-MIPS_MACHINE(LANTIQ_MACH_EASY336,
- "EASY336",
- "EASY336",
- easy336_init);
-
-MIPS_MACHINE(LANTIQ_MACH_EASY336SF,
- "EASY336SF",
- "EASY336 (Serial Flash)",
- easy336sf_init);
-
-MIPS_MACHINE(LANTIQ_MACH_EASY336NAND,
- "EASY336NAND",
- "EASY336 (NAND Flash)",
- easy336nand_init);
-
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/mux.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/mux.c
deleted file mode 100644
index 56805e55bb..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/mux.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/************************************************************************
- *
- * Copyright (c) 2007
- * Infineon Technologies AG
- * St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- ************************************************************************/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/init.h>
-#include <asm/addrspace.h>
-#include <linux/platform_device.h>
-
-#include <lantiq_soc.h>
-#include <svip_mux.h>
-#include <sys1_reg.h>
-#include <sys2_reg.h>
-#include <svip_pms.h>
-
-#define DRV_NAME "ltq_mux"
-
-static void ltq_mux_port_init(const int port,
- const struct ltq_mux_pin *pins,
- const int pin_max)
-{
- unsigned int i;
-
- for (i = 0; i < pin_max; i++)
- ltq_gpio_configure(port,
- i,
- pins[i].dirin,
- pins[i].puen,
- pins[i].altsel0,
- pins[i].altsel1);
-}
-
-static int ltq_mux_probe(struct platform_device *pdev)
-{
- struct ltq_mux_settings *mux_settings = dev_get_platdata(&pdev->dev);
-
- if (mux_settings->mux_p0)
- ltq_mux_port_init(0,
- mux_settings->mux_p0,
- LTQ_MUX_P0_PINS);
-
- if (mux_settings->mux_p1)
- ltq_mux_port_init(1,
- mux_settings->mux_p1,
- LTQ_MUX_P1_PINS);
-
- if (mux_settings->mux_p2)
- ltq_mux_port_init(2,
- mux_settings->mux_p2,
- LTQ_MUX_P2_PINS);
-
- if (mux_settings->mux_p3)
- ltq_mux_port_init(3,
- mux_settings->mux_p3,
- LTQ_MUX_P3_PINS);
-
- if (mux_settings->mux_p4)
- ltq_mux_port_init(4,
- mux_settings->mux_p4,
- LTQ_MUX_P4_PINS);
-
- return 0;
-}
-
-int ltq_mux_read_procmem(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- int len = 0;
- int t = 0, i = 0;
- u32 port_clk[5] = {
- SYS1_CLKENR_PORT0,
- SYS1_CLKENR_PORT1,
- SYS1_CLKENR_PORT2,
- SYS1_CLKENR_PORT3,
- SYS2_CLKENR_PORT4,
- };
-
-#define PROC_PRINT(fmt, args...) \
- do { \
- int c_len = 0; \
- c_len = snprintf(buf + len, count - len, fmt, ## args); \
- if (c_len <= 0) \
- goto out; \
- if (c_len >= (count - len)) { \
- len += (count - len); \
- goto out; \
- } \
- len += c_len; \
- if (offset > 0) { \
- if (len > offset) { \
- len -= offset; \
- memmove(buf, buf + offset, len); \
- offset = 0; \
- } else { \
- offset -= len; \
- len = 0; \
- } \
- } \
- } while (0)
-
- PROC_PRINT("\nVINETIC-SVIP Multiplex Settings\n");
- PROC_PRINT(" 3 2 1 0\n");
- PROC_PRINT(" 10987654321098765432109876543210\n");
- PROC_PRINT(" --------------------------------\n");
-
- for (i = 0; i < ARRAY_SIZE(port_clk); i++) {
- if (i < 4) {
- if (!svip_sys1_clk_is_enabled(port_clk[i]))
- continue;
- } else {
- if (!svip_sys2_clk_is_enabled(port_clk[i]))
- continue;
- }
-
- PROC_PRINT("P%d.%-10s", i, "DIR:");
-
- for (t = 31; t != -1; t--)
- PROC_PRINT("%d", ltq_port_get_dir(i, t) == 1 ? 1 : 0);
- PROC_PRINT("\n");
-
- PROC_PRINT("P%d.%-10s", i, "PUEN:");
- for (t = 31; t != -1; t--)
- PROC_PRINT("%d", ltq_port_get_puden(i, t) == 1 ? 1 : 0);
- PROC_PRINT("\n");
-
- PROC_PRINT("P%d.%-10s", i, "ALTSEL0:");
- for (t = 31; t != -1; t--)
- PROC_PRINT("%d",
- ltq_port_get_altsel0(i, t) == 1 ? 1 : 0);
- PROC_PRINT("\n");
-
- PROC_PRINT("P%d.%-10s", i, "ALTSEL1:");
- for (t = 31; t != -1; t--)
- PROC_PRINT("%d",
- ltq_port_get_altsel1(i, t) == 1 ? 1 : 0);
- PROC_PRINT("\n\n");
- }
-
-out:
- if (len < 0) {
- len = 0;
- *eof = 1;
- } else if (len < count) {
- *eof = 1;
- } else {
- len = count;
- }
-
- *start = buf;
-
- return len;
-}
-
-static struct platform_driver ltq_mux_driver = {
- .probe = ltq_mux_probe,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-int __init ltq_mux_init(void)
-{
- int ret = platform_driver_register(&ltq_mux_driver);
- if (ret) {
- printk(KERN_INFO DRV_NAME
- ": Error registering platform driver!");
- return ret;
- }
-
- return create_proc_read_entry("driver/ltq_mux", 0, NULL,
- ltq_mux_read_procmem, NULL) == NULL;
-}
-
-module_init(ltq_mux_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/pms.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/pms.c
deleted file mode 100644
index 5c0c808a04..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/pms.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/************************************************************************
- *
- * Copyright (c) 2007
- * Infineon Technologies AG
- * St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- ************************************************************************/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/init.h>
-#include <asm/addrspace.h>
-
-#include <base_reg.h>
-#include <sys1_reg.h>
-#include <sys2_reg.h>
-#include <lantiq_soc.h>
-
-static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE;
-static struct svip_reg_sys2 *const sys2 = (struct svip_reg_sys2 *)LTQ_SYS2_BASE;
-
-void svip_sys1_clk_enable(u32 mask)
-{
- sys1_w32(sys1_r32(clksr) | mask, clkenr);
- asm("sync;");
-}
-EXPORT_SYMBOL(svip_sys1_clk_enable);
-
-int svip_sys1_clk_is_enabled(u32 mask)
-{
- return (sys1_r32(clksr) & mask) != 0;
-}
-EXPORT_SYMBOL(svip_sys1_clk_is_enabled);
-
-void svip_sys2_clk_enable(u32 mask)
-{
- sys2_w32(sys2_r32(clksr) | mask, clkenr);
- asm("sync;");
-}
-EXPORT_SYMBOL(svip_sys2_clk_enable);
-
-int svip_sys2_clk_is_enabled(u32 mask)
-{
- return (sys2_r32(clksr) & mask) != 0;
-}
-EXPORT_SYMBOL(svip_sys2_clk_is_enabled);
-
-int ltq_pms_read_procmem(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- long len = 0;
- int t = 0;
- u32 bit = 0;
- u32 reg_tmp, bits_tmp;
-
- len = sprintf(buf, "\nSVIP PMS Settings\n");
- len = len + sprintf(buf + len,
- " 3 2 1 0\n");
- len = len + sprintf(buf + len,
- " 210987654321098765432109876543210\n");
- len = len + sprintf(buf + len,
- "---------------------------------------------\n");
- len = len + sprintf(buf + len,
- "SYS1_CLKSR: ");
- reg_tmp = sys1_r32(clksr);
- bit = 0x80000000;
- for (t = 31; t != -1; t--) {
- bits_tmp = (reg_tmp & bit) >> t;
- len = len + sprintf(buf + len, "%d", bits_tmp);
- bit = bit >> 1;
- }
- len = len + sprintf(buf + len, "\n\n");
- len = len + sprintf(buf + len, "SYS2_CLKSR: ");
- reg_tmp = sys2_r32(clksr);
- bit = 0x80000000;
- for (t = 31; t != -1; t--) {
- bits_tmp = (reg_tmp & bit) >> t;
- len = len + sprintf(buf + len, "%d", bits_tmp);
- bit = bit >> 1;
- }
- len = len + sprintf(buf + len, "\n\n");
-
- *eof = 1;
-
- return len;
-}
-
-int __init ltq_pms_init_proc(void)
-{
- return create_proc_read_entry("driver/ltq_pms", 0, NULL,
- ltq_pms_read_procmem, NULL) == NULL;
-}
-
-module_init(ltq_pms_init_proc);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/prom.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/prom.c
deleted file mode 100644
index 1c17531606..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/prom.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/time.h>
-#include <asm/bootinfo.h>
-
-#include <lantiq_soc.h>
-
-#include "../prom.h"
-#include "../clk.h"
-#include "../machtypes.h"
-
-#include <base_reg.h>
-#include <ebu_reg.h>
-
-#define SOC_SVIP "SVIP"
-
-#define PART_SHIFT 12
-#define PART_MASK 0x0FFFF000
-#define REV_SHIFT 28
-#define REV_MASK 0xF0000000
-
-static struct svip_reg_ebu *const ebu = (struct svip_reg_ebu *)LTQ_EBU_BASE;
-
-void __init ltq_soc_init(void)
-{
- clkdev_add_static(ltq_svip_cpu_hz(), ltq_svip_fpi_hz(),
- ltq_svip_io_region_clock());
-}
-
-void __init
-ltq_soc_setup(void)
-{
- if (mips_machtype == LANTIQ_MACH_EASY33016 ||
- mips_machtype == LANTIQ_MACH_EASY336) {
- ebu_w32(0x120000f1, addr_sel_2);
- ebu_w32(LTQ_EBU_CON_0_ADSWP |
- LTQ_EBU_CON_0_SETUP |
- LTQ_EBU_CON_0_BCGEN_VAL(0x02) |
- LTQ_EBU_CON_0_WAITWRC_VAL(7) |
- LTQ_EBU_CON_0_WAITRDC_VAL(3) |
- LTQ_EBU_CON_0_HOLDC_VAL(3) |
- LTQ_EBU_CON_0_RECOVC_VAL(3) |
- LTQ_EBU_CON_0_CMULT_VAL(3), con_2);
- }
-}
-
-void __init
-ltq_soc_detect(struct ltq_soc_info *i)
-{
- i->partnum = (ltq_r32(LTQ_STATUS_CHIPID) & PART_MASK) >> PART_SHIFT;
- i->rev = (ltq_r32(LTQ_STATUS_CHIPID) & REV_MASK) >> REV_SHIFT;
- sprintf(i->rev_type, "1.%d", i->rev);
- switch (i->partnum) {
- case SOC_ID_SVIP:
- i->name = SOC_SVIP;
- i->type = SOC_TYPE_SVIP;
- break;
-
- default:
- printk(KERN_ERR "unknown partnum : 0x%08X\n", i->partnum);
- while (1);
- break;
- }
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/reset.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/reset.c
deleted file mode 100644
index 5551875da6..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/reset.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/pm.h>
-#include <linux/module.h>
-#include <asm/reboot.h>
-
-#include <lantiq_soc.h>
-#include "../machtypes.h"
-#include <base_reg.h>
-#include <sys1_reg.h>
-#include <boot_reg.h>
-#include <ebu_reg.h>
-
-static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE;
-static struct svip_reg_ebu *const ebu = (struct svip_reg_ebu *)LTQ_EBU_BASE;
-
-#define CPLD_CMDREG3 ((volatile unsigned char*)(KSEG1 + 0x120000f3))
-extern void switchip_reset(void);
-
-static void ltq_machine_restart(char *command)
-{
- printk(KERN_NOTICE "System restart\n");
- local_irq_disable();
-
- if (mips_machtype == LANTIQ_MACH_EASY33016 ||
- mips_machtype == LANTIQ_MACH_EASY336) {
- /* We just use the CPLD function to reset the entire system as a
- workaround for the switch reset problem */
- local_irq_disable();
- ebu_w32(0x120000f1, addr_sel_2);
- ebu_w32(0x404027ff, con_2);
-
- if (mips_machtype == LANTIQ_MACH_EASY336)
- /* set bit 0 to reset SVIP */
- *CPLD_CMDREG3 = (1<<0);
- else
- /* set bit 7 to reset SVIP, set bit 3 to reset xT */
- *CPLD_CMDREG3 = (1<<7) | (1<<3);
- } else {
- *LTQ_BOOT_RVEC(0) = 0;
- /* reset all except PER, SUBSYS and CPU0 */
- sys1_w32(0x00043F3E, rreqr);
- /* release WDT0 reset */
- sys1_w32(0x00000100, rrlsr);
- /* restore reset value for clock enables */
- sys1_w32(~0x0c000040, clkclr);
- /* reset SUBSYS (incl. DDR2) and CPU0 */
- sys1_w32(0x00030001, rbtr);
- }
-
- for (;;)
- ;
-}
-
-static void ltq_machine_halt(void)
-{
- printk(KERN_NOTICE "System halted.\n");
- local_irq_disable();
- for (;;)
- ;
-}
-
-static void ltq_machine_power_off(void)
-{
- printk(KERN_NOTICE "Please turn off the power now.\n");
- local_irq_disable();
- for (;;)
- ;
-}
-
-/* This function is used by the watchdog driver */
-int ltq_reset_cause(void)
-{
- return 0;
-}
-EXPORT_SYMBOL_GPL(ltq_reset_cause);
-
-static int __init mips_reboot_setup(void)
-{
- _machine_restart = ltq_machine_restart;
- _machine_halt = ltq_machine_halt;
- pm_power_off = ltq_machine_power_off;
- return 0;
-}
-
-arch_initcall(mips_reboot_setup);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/svip/switchip_setup.c b/target/linux/lantiq/files/arch/mips/lantiq/svip/switchip_setup.c
deleted file mode 100644
index 5da15327ea..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/svip/switchip_setup.c
+++ /dev/null
@@ -1,666 +0,0 @@
-/******************************************************************************
- Copyright (c) 2007, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
- ******************************************************************************
- Module : switchip_setup.c
- Date : 2007-11-09
- Description : Basic setup of embedded ethernet switch "SwitchIP"
- Remarks: andreas.schmidt@infineon.com
-
- *****************************************************************************/
-
-/* TODO: get rid of #ifdef CONFIG_LANTIQ_MACH_EASY336 */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/workqueue.h>
-#include <linux/time.h>
-
-#include <base_reg.h>
-#include <es_reg.h>
-#include <sys1_reg.h>
-#include <dma_reg.h>
-#include <lantiq_soc.h>
-
-static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE;
-static struct svip_reg_es *const es = (struct svip_reg_es *)LTQ_ES_BASE;
-
-/* PHY Organizationally Unique Identifier (OUI) */
-#define PHY_OUI_PMC 0x00E004
-#define PHY_OUI_VITESSE 0x008083
-#define PHY_OUI_DEFAULT 0xFFFFFF
-
-unsigned short switchip_phy_read(unsigned int phyaddr, unsigned int regaddr);
-void switchip_phy_write(unsigned int phyaddr, unsigned int regaddr,
- unsigned short data);
-
-static int phy_address[2] = {0, 1};
-static u32 phy_oui;
-static void switchip_mdio_poll_init(void);
-static void _switchip_mdio_poll(struct work_struct *work);
-
-/* struct workqueue_struct mdio_poll_task; */
-static struct workqueue_struct *mdio_poll_workqueue;
-DECLARE_DELAYED_WORK(mdio_poll_work, _switchip_mdio_poll);
-static int old_link_status[2] = {-1, -1};
-
-/**
- * Autonegotiation check.
- * This funtion checks for link changes. If a link change has occured it will
- * update certain switch registers.
- */
-static void _switchip_check_phy_status(int port)
-{
- int new_link_status;
- unsigned short reg1;
-
- reg1 = switchip_phy_read(phy_address[port], 1);
- if ((reg1 == 0xFFFF) || (reg1 == 0x0000))
- return; /* no PHY connected */
-
- new_link_status = reg1 & 4;
- if (old_link_status[port] ^ new_link_status) {
- /* link status change */
- if (!new_link_status) {
- if (port == 0)
- es_w32_mask(LTQ_ES_P0_CTL_REG_FLP, 0, p0_ctl);
- else
- es_w32_mask(LTQ_ES_P0_CTL_REG_FLP, 0, p1_ctl);
-
- /* read again; link bit is latched low! */
- reg1 = switchip_phy_read(phy_address[port], 1);
- new_link_status = reg1 & 4;
- }
-
- if (new_link_status) {
- unsigned short reg0, reg4, reg5, reg9, reg10;
- int phy_pause, phy_speed, phy_duplex;
- int aneg_enable, aneg_cmpt;
-
- reg0 = switchip_phy_read(phy_address[port], 0);
- reg4 = switchip_phy_read(phy_address[port], 4);
- aneg_enable = reg0 & 0x1000;
- aneg_cmpt = reg1 & 0x20;
-
- if (aneg_enable && aneg_cmpt) {
- reg5 = switchip_phy_read(phy_address[port], 5);
- switch (phy_oui) {
-#ifdef CONFIG_LANTIQ_MACH_EASY336
- case PHY_OUI_PMC:
- /* PMC Sierra supports 1Gigabit FD,
- * only. On successful
- * auto-negotiation, we are sure this
- * is what the LP can. */
- phy_pause = ((reg4 & reg5) & 0x0080) >> 7;
- phy_speed = 2;
- phy_duplex = 1;
- break;
-#endif
- case PHY_OUI_VITESSE:
- case PHY_OUI_DEFAULT:
- reg9 = switchip_phy_read(phy_address[port], 9);
- reg10 = switchip_phy_read(phy_address[port], 10);
-
- /* Check if advertise and partner
- * agree on pause */
- phy_pause = ((reg4 & reg5) & 0x0400) >> 10;
-
- /* Find the best mode both partners
- * support
- * Priority: 1GB-FD, 1GB-HD, 100MB-FD,
- * 100MB-HD, 10MB-FD, 10MB-HD */
- phy_speed = ((((reg9<<2) & reg10)
- & 0x0c00) >> 6) |
- (((reg4 & reg5) & 0x01e0) >> 5);
-
- if (phy_speed >= 0x0020) {
- phy_speed = 2;
- phy_duplex = 1;
- } else if (phy_speed >= 0x0010) {
- phy_speed = 2;
- phy_duplex = 0;
- } else if (phy_speed >= 0x0008) {
- phy_speed = 1;
- phy_duplex = 1;
- } else if (phy_speed >= 0x0004) {
- phy_speed = 1;
- phy_duplex = 0;
- } else if (phy_speed >= 0x0002) {
- phy_speed = 0;
- phy_duplex = 1;
- } else {
- phy_speed = 0;
- phy_duplex = 0;
- }
- break;
- default:
- phy_pause = (reg4 & 0x0400) >> 10;
- phy_speed = (reg0 & 0x40 ? 2 : (reg0 >> 13)&1);
- phy_duplex = (reg0 >> 8)&1;
- break;
- }
- } else {
- /* parallel detection or fixed speed */
- phy_pause = (reg4 & 0x0400) >> 10;
- phy_speed = (reg0 & 0x40 ? 2 : (reg0 >> 13)&1);
- phy_duplex = (reg0 >> 8)&1;
- }
-
- if (port == 0) {
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0SPD,
- LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(phy_speed),
- rgmii_ctl);
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0DUP,
- LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(phy_duplex),
- rgmii_ctl);
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0FCE,
- LTQ_ES_RGMII_CTL_REG_P0FCE_VAL(phy_pause),
- rgmii_ctl);
-
- es_w32_mask(0, LTQ_ES_P0_CTL_REG_FLP, p0_ctl);
- } else {
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1SPD,
- LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(phy_speed),
- rgmii_ctl);
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1DUP,
- LTQ_ES_RGMII_CTL_REG_P1DUP_VAL(phy_duplex),
- rgmii_ctl);
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1FCE,
- LTQ_ES_RGMII_CTL_REG_P0FCE_VAL(phy_pause),
- rgmii_ctl);
-
- es_w32_mask(1, LTQ_ES_P0_CTL_REG_FLP, p1_ctl);
- }
- }
- }
- old_link_status[port] = new_link_status;
-}
-
-static void _switchip_mdio_poll(struct work_struct *work)
-{
- if (es_r32(sw_gctl0) & LTQ_ES_SW_GCTL0_REG_SE) {
- _switchip_check_phy_status(0);
- _switchip_check_phy_status(1);
- }
-
- queue_delayed_work(mdio_poll_workqueue, &mdio_poll_work, HZ/2);
-}
-
-static void switchip_mdio_poll_init(void)
-{
- mdio_poll_workqueue = create_workqueue("SVIP MDIP poll");
- INIT_DELAYED_WORK(&mdio_poll_work, _switchip_mdio_poll);
-
- queue_delayed_work(mdio_poll_workqueue, &mdio_poll_work, HZ/2);
-
-}
-
-unsigned short switchip_phy_read(unsigned int phyaddr, unsigned int regaddr)
-{
- /* TODO: protect MDIO access with semaphore */
- es_w32(LTQ_ES_MDIO_CTL_REG_MBUSY
- | LTQ_ES_MDIO_CTL_REG_OP_VAL(2) /* read operation */
- | LTQ_ES_MDIO_CTL_REG_PHYAD_VAL(phyaddr)
- | LTQ_ES_MDIO_CTL_REG_REGAD_VAL(regaddr), mdio_ctl);
- while (es_r32(mdio_ctl) & LTQ_ES_MDIO_CTL_REG_MBUSY);
-
- return es_r32(mdio_data) & 0xFFFF;
-}
-EXPORT_SYMBOL(switchip_phy_read);
-
-void switchip_phy_write(unsigned int phyaddr, unsigned int regaddr,
- unsigned short data)
-{
- /* TODO: protect MDIO access with semaphore */
- es_w32(LTQ_ES_MDIO_CTL_REG_WD_VAL(data)
- | LTQ_ES_MDIO_CTL_REG_MBUSY
- | LTQ_ES_MDIO_CTL_REG_OP_VAL(1) /* write operation */
- | LTQ_ES_MDIO_CTL_REG_PHYAD_VAL(phyaddr)
- | LTQ_ES_MDIO_CTL_REG_REGAD_VAL(regaddr), mdio_ctl);
- while (es_r32(mdio_ctl) & LTQ_ES_MDIO_CTL_REG_MBUSY);
-
- return;
-}
-EXPORT_SYMBOL(switchip_phy_write);
-
-const static u32 switch_reset_offset_000[] = {
- /*b8000000:*/ 0xffffffff, 0x00000001, 0x00000001, 0x00000003,
- /*b8000010:*/ 0x04070001, 0x04070001, 0x04070001, 0xffffffff,
- /*b8000020:*/ 0x00001be8, 0x00001be8, 0x00001be8, 0xffffffff,
- /*b8000030:*/ 0x00000000, 0x00000000, 0x00080004, 0x00020001,
- /*b8000040:*/ 0x00000000, 0x00000000, 0x00080004, 0x00020001,
- /*b8000050:*/ 0x00000000, 0x00000000, 0x00080004, 0x00020001,
- /*b8000060:*/ 0x00000000, 0x00000000, 0x00081000, 0x001f7777,
- /*b8000070:*/ 0x00000000, 0x00000000, 0x0c00ac2b, 0x0000fa50,
- /*b8000080:*/ 0x00001000, 0x00001800, 0x00000000, 0x00000000,
- /*b8000090:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b80000a0:*/ 0x00000000, 0x00000050, 0x00000010, 0x00000000,
- /*b80000b0:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b80000c0:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b80000d0:*/ 0xffffffff, 0x00000000, 0x00000000
-};
-const static u32 switch_reset_offset_100[] = {
- /*b8000100:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b8000110:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b8000120:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b8000130:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b8000140:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b8000150:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b8000160:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b8000170:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b8000180:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b8000190:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b80001a0:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000,
- /*b80001b0:*/ 0x00000000, 0x00000000
-};
-
-/*
- * Switch Reset.
- */
-void switchip_reset(void)
-{
- volatile unsigned int *reg;
- volatile unsigned int rdreg;
- int i;
-
- sys1_w32(SYS1_CLKENR_ETHSW, clkenr);
- asm("sync");
-
- /* disable P0 */
- es_w32_mask(0, LTQ_ES_P0_CTL_REG_SPS_VAL(1), p0_ctl);
- /* disable P1 */
- es_w32_mask(0, LTQ_ES_P0_CTL_REG_SPS_VAL(1), p1_ctl);
- /* disable P2 */
- es_w32_mask(0, LTQ_ES_P0_CTL_REG_SPS_VAL(1), p2_ctl);
-
- /**************************************
- * BEGIN: Procedure to clear MAC table
- **************************************/
- for (i = 0; i < 3; i++) {
- int result;
-
- /* check if access engine is available */
- while (es_r32(adr_tb_st2) & LTQ_ES_ADR_TB_ST2_REG_BUSY);
-
- /* initialise to first address */
- es_w32(LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(3)
- | LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(0), adr_tb_ctl2);
-
- /* wait while busy */
- while (es_r32(adr_tb_st2) & LTQ_ES_ADR_TB_ST2_REG_BUSY);
-
- /* setup the portmap */
- es_w32_mask(0, LTQ_ES_ADR_TB_CTL1_REG_PMAP_VAL(1 << i),
- adr_tb_ctl1);
-
- do {
- /* search for addresses by port */
- es_w32(LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(2)
- | LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(9), adr_tb_ctl2);
-
- /* wait while busy */
- while (es_r32(adr_tb_st2) & LTQ_ES_ADR_TB_ST2_REG_BUSY);
-
- result = LTQ_ES_ADR_TB_ST2_REG_RSLT_GET(es_r32(adr_tb_st2));
- if (result == 0x101) {
- printk(KERN_ERR "%s, cmd error\n", __func__);
- return;
- }
- /* if Command OK, address found... */
- if (result == 0) {
- unsigned char mac[6];
-
- mac[5] = (es_r32(adr_tb_st0) >> 0) & 0xff;
- mac[4] = (es_r32(adr_tb_st0) >> 8) & 0xff;
- mac[3] = (es_r32(adr_tb_st0) >> 16) & 0xff;
- mac[2] = (es_r32(adr_tb_st0) >> 24) & 0xff;
- mac[1] = (es_r32(adr_tb_st1) >> 0) & 0xff;
- mac[0] = (es_r32(adr_tb_st1) >> 8) & 0xff;
-
- /* setup address */
- es_w32((mac[5] << 0) |
- (mac[4] << 8) |
- (mac[3] << 16) |
- (mac[2] << 24), adr_tb_ctl0);
- es_w32(LTQ_ES_ADR_TB_CTL1_REG_PMAP_VAL(1<<i) |
- LTQ_ES_ADR_TB_CTL1_REG_FID_VAL(0) |
- (mac[0] << 8) |
- (mac[1] << 0), adr_tb_ctl1);
- /* erase address */
-
- es_w32(LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(1) |
- LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(15),
- adr_tb_ctl2);
-
- /* wait, while busy */
- while (es_r32(adr_tb_st2) &
- LTQ_ES_ADR_TB_ST2_REG_BUSY);
- }
- } while (result == 0);
- }
- /**************************************
- * END: Procedure to clear MAC table
- **************************************/
-
- /* reset RMON counters */
- es_w32(LTQ_ES_RMON_CTL_REG_BAS | LTQ_ES_RMON_CTL_REG_CAC_VAL(3),
- rmon_ctl);
-
- /* bring all registers to reset state */
- reg = LTQ_ES_PS_REG;
- for (i = 0; i < ARRAY_SIZE(switch_reset_offset_000); i++) {
- if ((reg == LTQ_ES_PS_REG) ||
- (reg >= LTQ_ES_ADR_TB_CTL0_REG &&
- reg <= LTQ_ES_ADR_TB_ST2_REG))
- continue;
-
- if (switch_reset_offset_000[i] != 0xFFFFFFFF) {
- /* write reset value to register */
- *reg = switch_reset_offset_000[i];
- /* read register value back */
- rdreg = *reg;
- if (reg == LTQ_ES_SW_GCTL1_REG)
- rdreg &= ~LTQ_ES_SW_GCTL1_REG_BISTDN;
- /* compare read value with written one */
- if (rdreg != switch_reset_offset_000[i]) {
- printk(KERN_ERR "%s,%d: reg %08x mismatch "
- "[has:%08x, expect:%08x]\n",
- __func__, __LINE__,
- (unsigned int)reg, rdreg,
- switch_reset_offset_000[i]);
- }
- }
- reg++;
- }
-
- reg = LTQ_ES_VLAN_FLT0_REG;
- for (i = 0; i < ARRAY_SIZE(switch_reset_offset_100); i++) {
- *reg = switch_reset_offset_100[i];
- rdreg = *reg;
- if (rdreg != switch_reset_offset_100[i]) {
- printk(KERN_ERR "%s,%d: reg %08x mismatch "
- "[has:%08x, expect:%08x]\n", __func__, __LINE__,
- (unsigned int)reg, rdreg,
- switch_reset_offset_100[i]);
- }
- reg++;
- }
-}
-EXPORT_SYMBOL(switchip_reset);
-
-static u32 get_phy_oui(unsigned char phy_addr)
-{
- u32 oui;
- int i, bit, byte, shift, w;
- u16 reg_id[2];
-
- /* read PHY identifier registers 1 and 2 */
- reg_id[0] = switchip_phy_read(phy_addr, 2);
- reg_id[1] = switchip_phy_read(phy_addr, 3);
-
- oui = 0;
- w = 1;
- shift = 7;
- byte = 1;
- for (i = 0, bit = 10; i <= 21; i++, bit++) {
- oui |= ((reg_id[w] & (1<<bit)) ? 1 : 0) << shift;
- if (!(shift % 8)) {
- byte++;
- if (byte == 2)
- shift = 15;
- else
- shift = 21;
- } else {
- shift--;
- }
- if (w == 1 && bit == 15) {
- bit = -1;
- w = 0;
- }
- }
- return oui;
-}
-
-/*
- * Switch Initialization.
- */
-int switchip_init(void)
-{
- int eth_port, phy_present = 0;
- u16 reg, mode;
-
- sys1_w32(SYS1_CLKENR_ETHSW, clkenr);
- asm("sync");
-
- /* Enable Switch, if not already done so */
- if ((es_r32(sw_gctl0) & LTQ_ES_SW_GCTL0_REG_SE) == 0)
- es_w32_mask(0, LTQ_ES_SW_GCTL0_REG_SE, sw_gctl0);
- /* Wait for completion of MBIST */
- while (LTQ_ES_SW_GCTL1_REG_BISTDN_GET(es_r32(sw_gctl1)) == 0);
-
- switchip_reset();
-
- mode = LTQ_ES_RGMII_CTL_REG_IS_GET(es_r32(rgmii_ctl));
- eth_port = (mode == 2 ? 1 : 0);
-
- /* Set the primary port(port toward backplane) as sniffer port,
- changing from P2 which is the reset setting */
- es_w32_mask(LTQ_ES_SW_GCTL0_REG_SNIFFPN,
- LTQ_ES_SW_GCTL0_REG_SNIFFPN_VAL(eth_port),
- sw_gctl0);
-
- /* Point MDIO state machine to invalid PHY addresses 8 and 9 */
- es_w32_mask(0, LTQ_ES_SW_GCTL0_REG_PHYBA, sw_gctl0);
-
- /* Add CRC for packets from DMA to PMAC.
- Remove CRC for packets from PMAC to DMA. */
- es_w32(LTQ_ES_PMAC_HD_CTL_RC | LTQ_ES_PMAC_HD_CTL_AC, pmac_hd_ctl);
-
- phy_oui = get_phy_oui(0);
- switch (phy_oui) {
-#ifdef CONFIG_LANTIQ_MACH_EASY336
- case PHY_OUI_PMC:
- phy_address[0] = (mode == 2 ? -1 : 2);
- phy_address[1] = (mode == 2 ? 2 : -1);
- break;
-#endif
- case PHY_OUI_VITESSE:
- default:
- phy_oui = PHY_OUI_DEFAULT;
- phy_address[0] = (mode == 2 ? 1 : 0);
- phy_address[1] = (mode == 2 ? 0 : 1);
- break;
- }
-
- /****** PORT 0 *****/
- reg = switchip_phy_read(phy_address[0], 1);
- if ((reg != 0x0000) && (reg != 0xffff)) {
- /* PHY connected? */
- phy_present |= 1;
- /* Set Rx- and TxDelay in case of RGMII */
- switch (mode) {
- case 0: /* *RGMII,RGMII */
- case 2: /* RGMII,*GMII */
- /* program clock delay in PHY, not in SVIP */
-
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0RDLY, 0, rgmii_ctl);
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0TDLY, 0, rgmii_ctl);
- if (phy_oui == PHY_OUI_VITESSE ||
- phy_oui == PHY_OUI_DEFAULT) {
- switchip_phy_write(phy_address[0], 31, 0x0001);
- switchip_phy_write(phy_address[0], 28, 0xA000);
- switchip_phy_write(phy_address[0], 31, 0x0000);
- }
- default:
- break;
- }
- if (phy_oui == PHY_OUI_VITESSE ||
- phy_oui == PHY_OUI_DEFAULT) {
- /* Program PHY advertisements and
- * restart auto-negotiation */
- switchip_phy_write(phy_address[0], 4, 0x05E1);
- switchip_phy_write(phy_address[0], 9, 0x0300);
- switchip_phy_write(phy_address[0], 0, 0x3300);
- } else {
- reg = switchip_phy_read(phy_address[1], 0);
- reg |= 0x1000; /* auto-negotiation enable */
- switchip_phy_write(phy_address[1], 0, reg);
- reg |= 0x0200; /* auto-negotiation restart */
- switchip_phy_write(phy_address[1], 0, reg);
- }
- } else {
- /* Force SWITCH link with highest capability:
- * 100M FD for MII
- * 1G FD for GMII/RGMII
- */
- switch (mode) {
- case 1: /* *MII,MII */
- case 3: /* *MII,RGMII */
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(1),
- rgmii_ctl);
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(1),
- rgmii_ctl);
- break;
- case 0: /* *RGMII,RGMII */
- case 2: /* RGMII,*GMII */
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(2),
- rgmii_ctl);
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(1),
- rgmii_ctl);
-
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0RDLY, 0, rgmii_ctl);
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0TDLY_VAL(2),
- rgmii_ctl);
- break;
- }
-
- es_w32_mask(0, LTQ_ES_P0_CTL_REG_FLP, p0_ctl);
- }
-
- /****** PORT 1 *****/
- reg = switchip_phy_read(phy_address[1], 1);
- if ((reg != 0x0000) && (reg != 0xffff)) {
- /* PHY connected? */
- phy_present |= 2;
- /* Set Rx- and TxDelay in case of RGMII */
- switch (mode) {
- case 0: /* *RGMII,RGMII */
- case 3: /* *MII,RGMII */
- /* program clock delay in PHY, not in SVIP */
-
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1RDLY, 0, rgmii_ctl);
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1TDLY, 0, rgmii_ctl);
- if (phy_oui == PHY_OUI_VITESSE ||
- phy_oui == PHY_OUI_DEFAULT) {
- switchip_phy_write(phy_address[1], 31, 0x0001);
- switchip_phy_write(phy_address[1], 28, 0xA000);
- switchip_phy_write(phy_address[1], 31, 0x0000);
- }
- break;
- case 2: /* RGMII,*GMII */
-
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(2),
- rgmii_ctl);
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl);
-#ifdef CONFIG_LANTIQ_MACH_EASY336
- if (phy_oui == PHY_OUI_PMC) {
- switchip_phy_write(phy_address[1], 24, 0x0510);
- switchip_phy_write(phy_address[1], 17, 0xA38C);
- switchip_phy_write(phy_address[1], 17, 0xA384);
- }
-#endif
- break;
- default:
- break;
- }
- /* Program PHY advertisements and restart auto-negotiation */
- if (phy_oui == PHY_OUI_VITESSE ||
- phy_oui == PHY_OUI_DEFAULT) {
- switchip_phy_write(phy_address[1], 4, 0x05E1);
- switchip_phy_write(phy_address[1], 9, 0x0300);
- switchip_phy_write(phy_address[1], 0, 0x3300);
- } else {
- reg = switchip_phy_read(phy_address[1], 0);
- reg |= 0x1000; /* auto-negotiation enable */
- switchip_phy_write(phy_address[1], 0, reg);
- reg |= 0x0200; /* auto-negotiation restart */
- switchip_phy_write(phy_address[1], 0, reg);
- }
- } else {
- /* Force SWITCH link with highest capability:
- * 100M FD for MII
- * 1G FD for GMII/RGMII
- */
- switch (mode) {
- case 1: /* *MII,MII */
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(1),
- rgmii_ctl);
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl);
- break;
- case 0: /* *RGMII,RGMII */
- case 3: /* *MII,RGMII */
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(2),
- rgmii_ctl);
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl);
- es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1RDLY, 0, rgmii_ctl);
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1TDLY_VAL(2),
- rgmii_ctl);
- break;
- case 2: /* RGMII,*GMII */
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(2),
- rgmii_ctl);
- es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl);
- break;
- }
- es_w32_mask(0, LTQ_ES_P0_CTL_REG_FLP, p0_ctl);
- }
-
- /*
- * Allow unknown unicast/multicast and broadcasts
- * on all ports.
- */
-
- es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_UP_VAL(7), sw_gctl1);
- es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_BP_VAL(7), sw_gctl1);
- es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_MP_VAL(7), sw_gctl1);
- es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_RP_VAL(7), sw_gctl1);
-
- /* Enable LAN port(s) */
- if (eth_port == 0)
- es_w32_mask(LTQ_ES_P0_CTL_REG_SPS, 0, p0_ctl);
- else
- es_w32_mask(LTQ_ES_P0_CTL_REG_SPS, 0, p1_ctl);
- /* Enable CPU Port (Forwarding State) */
- es_w32_mask(LTQ_ES_P0_CTL_REG_SPS, 0, p2_ctl);
-
- if (phy_present)
- switchip_mdio_poll_init();
-
- return 0;
-}
-EXPORT_SYMBOL(switchip_init);
-
-device_initcall(switchip_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/clk.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/clk.c
deleted file mode 100644
index 5d850dc7b3..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/clk.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/div64.h>
-
-#include <lantiq_soc.h>
-
-#include "../clk.h"
-
-static unsigned int ltq_ram_clocks[] = {
- CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
-#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
-
-#define BASIC_FREQUENCY_1 35328000
-#define BASIC_FREQUENCY_2 36000000
-#define BASIS_REQUENCY_USB 12000000
-
-#define GET_BITS(x, msb, lsb) \
- (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-
-/* legacy xway clock */
-#define LTQ_CGU_PLL0_CFG 0x0004
-#define LTQ_CGU_PLL1_CFG 0x0008
-#define LTQ_CGU_PLL2_CFG 0x000C
-#define LTQ_CGU_SYS 0x0010
-#define LTQ_CGU_UPDATE 0x0014
-#define LTQ_CGU_IF_CLK 0x0018
-#define LTQ_CGU_OSC_CON 0x001C
-#define LTQ_CGU_SMD 0x0020
-#define LTQ_CGU_CT1SR 0x0028
-#define LTQ_CGU_CT2SR 0x002C
-#define LTQ_CGU_PCMCR 0x0030
-#define LTQ_CGU_PCI_CR 0x0034
-#define LTQ_CGU_PD_PC 0x0038
-#define LTQ_CGU_FMR 0x003C
-
-#define CGU_PLL0_PHASE_DIVIDER_ENABLE \
- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
-#define CGU_PLL0_BYPASS \
- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
-#define CGU_PLL0_CFG_DSMSEL \
- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
-#define CGU_PLL0_CFG_FRAC_EN \
- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
-#define CGU_PLL1_SRC \
- (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
-#define CGU_PLL2_PHASE_DIVIDER_ENABLE \
- (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
-#define CGU_SYS_FPI_SEL (1 << 6)
-#define CGU_SYS_DDR_SEL 0x3
-#define CGU_PLL0_SRC (1 << 29)
-
-#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
-#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
-#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
-#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
-#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
-
-/* vr9 clock */
-#define LTQ_CGU_SYS_VR9 0x0c
-#define LTQ_CGU_IF_CLK_VR9 0x24
-
-
-static unsigned int ltq_get_pll0_fdiv(void);
-
-static inline unsigned int get_input_clock(int pll)
-{
- switch (pll) {
- case 0:
- if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
- return BASIS_REQUENCY_USB;
- else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
- return BASIC_FREQUENCY_1;
- else
- return BASIC_FREQUENCY_2;
- case 1:
- if (CGU_PLL1_SRC)
- return BASIS_REQUENCY_USB;
- else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
- return BASIC_FREQUENCY_1;
- else
- return BASIC_FREQUENCY_2;
- case 2:
- switch (CGU_PLL2_SRC) {
- case 0:
- return ltq_get_pll0_fdiv();
- case 1:
- return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
- BASIC_FREQUENCY_1 :
- BASIC_FREQUENCY_2;
- case 2:
- return BASIS_REQUENCY_USB;
- }
- default:
- return 0;
- }
-}
-
-static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
-{
- u64 res, clock = get_input_clock(pll);
-
- res = num * clock;
- do_div(res, den);
- return res;
-}
-
-static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
- unsigned int K)
-{
- unsigned int num = ((N + 1) << 10) + K;
- unsigned int den = (M + 1) << 10;
-
- return cal_dsm(pll, num, den);
-}
-
-static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
- unsigned int K)
-{
- unsigned int num = ((N + 1) << 11) + K + 512;
- unsigned int den = (M + 1) << 11;
-
- return cal_dsm(pll, num, den);
-}
-
-static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
- unsigned int K)
-{
- unsigned int num = K >= 512 ?
- ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
- unsigned int den = (M + 1) << 12;
-
- return cal_dsm(pll, num, den);
-}
-
-static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
- unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
-{
- if (!dsmsel)
- return mash_dsm(pll, M, N, K);
- else if (!phase_div_en)
- return mash_dsm(pll, M, N, K);
- else
- return ssff_dsm_2(pll, M, N, K);
-}
-
-static inline unsigned int ltq_get_pll0_fosc(void)
-{
- if (CGU_PLL0_BYPASS)
- return get_input_clock(0);
- else
- return !CGU_PLL0_CFG_FRAC_EN
- ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
- CGU_PLL0_CFG_DSMSEL,
- CGU_PLL0_PHASE_DIVIDER_ENABLE)
- : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
- CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
- CGU_PLL0_PHASE_DIVIDER_ENABLE);
-}
-
-static unsigned int ltq_get_pll0_fdiv(void)
-{
- unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
-
- return (ltq_get_pll0_fosc() + (div >> 1)) / div;
-}
-
-unsigned long ltq_danube_io_region_clock(void)
-{
- unsigned int ret = ltq_get_pll0_fosc();
-
- switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0x3) {
- default:
- case 0:
- return (ret + 1) / 2;
- case 1:
- return (ret * 2 + 2) / 5;
- case 2:
- return (ret + 1) / 3;
- case 3:
- return (ret + 2) / 4;
- }
-}
-
-unsigned long ltq_danube_fpi_bus_clock(int fpi)
-{
- unsigned long ret = ltq_danube_io_region_clock();
-
- if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
- ret >>= 1;
- return ret;
-}
-
-unsigned long ltq_danube_fpi_hz(void)
-{
- unsigned long ddr_clock = DDR_HZ;
-
- if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
- return ddr_clock >> 1;
- return ddr_clock;
-}
-
-unsigned long ltq_danube_cpu_hz(void)
-{
- switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
- case 0:
- return CLOCK_333M;
- case 4:
- return DDR_HZ;
- case 8:
- return DDR_HZ << 1;
- default:
- return DDR_HZ >> 1;
- }
-}
-
-unsigned long ltq_ar9_sys_hz(void)
-{
- if (((ltq_cgu_r32(LTQ_CGU_SYS) >> 3) & 0x3) == 0x2)
- return CLOCK_393M;
- return CLOCK_333M;
-}
-
-unsigned long ltq_ar9_fpi_hz(void)
-{
- unsigned long sys = ltq_ar9_sys_hz();
-
- if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(0))
- return sys;
- return sys >> 1;
-}
-
-unsigned long ltq_ar9_cpu_hz(void)
-{
- if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(2))
- return ltq_ar9_fpi_hz();
- else
- return ltq_ar9_sys_hz();
-}
-
-unsigned long ltq_vr9_cpu_hz(void)
-{
- unsigned int cpu_sel;
- unsigned long clk;
-
- cpu_sel = (ltq_cgu_r32(LTQ_CGU_SYS_VR9) >> 4) & 0xf;
-
- switch (cpu_sel) {
- case 0:
- clk = CLOCK_600M;
- break;
- case 1:
- clk = CLOCK_500M;
- break;
- case 2:
- clk = CLOCK_393M;
- break;
- case 3:
- clk = CLOCK_333M;
- break;
- case 5:
- case 6:
- clk = CLOCK_196_608M;
- break;
- case 7:
- clk = CLOCK_167M;
- break;
- case 4:
- case 8:
- case 9:
- clk = CLOCK_125M;
- break;
- default:
- clk = 0;
- break;
- }
-
- return clk;
-}
-
-unsigned long ltq_vr9_fpi_hz(void)
-{
- unsigned int ocp_sel, cpu_clk;
- unsigned long clk;
-
- cpu_clk = ltq_vr9_cpu_hz();
- ocp_sel = ltq_cgu_r32(LTQ_CGU_SYS_VR9) & 0x3;
-
- switch (ocp_sel) {
- case 0:
- /* OCP ratio 1 */
- clk = cpu_clk;
- break;
- case 2:
- /* OCP ratio 2 */
- clk = cpu_clk / 2;
- break;
- case 3:
- /* OCP ratio 2.5 */
- clk = (cpu_clk * 2) / 5;
- break;
- case 4:
- /* OCP ratio 3 */
- clk = cpu_clk / 3;
- break;
- default:
- clk = 0;
- break;
- }
-
- return clk;
-}
-
-unsigned long ltq_vr9_fpi_bus_clock(int fpi)
-{
- return ltq_vr9_fpi_hz();
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.c
deleted file mode 100644
index 56086fa139..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mtd/physmap.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/etherdevice.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-
-#include <lantiq_soc.h>
-#include <lantiq_irq.h>
-#include <lantiq_platform.h>
-
-#define LTQ_USB_IOMEM_BASE 0x1e101000
-#define LTQ_USB_IOMEM_SIZE 0x00001000
-
-static struct resource resources[] =
-{
- [0] = {
- .name = "dwc_otg_membase",
- .start = LTQ_USB_IOMEM_BASE,
- .end = LTQ_USB_IOMEM_BASE + LTQ_USB_IOMEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "dwc_otg_irq",
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 dwc_dmamask = (u32)0x1fffffff;
-
-static struct platform_device platform_dev = {
- .name = "dwc_otg",
- .dev = {
- .dma_mask = &dwc_dmamask,
- },
- .resource = resources,
- .num_resources = ARRAY_SIZE(resources),
-};
-
-int __init
-xway_register_dwc(int pin)
-{
- struct irq_data d;
- d.irq = resources[1].start;
- ltq_enable_irq(&d);
- resources[1].start = ltq_is_ase() ? LTQ_USB_ASE_INT : LTQ_USB_INT;
- platform_dev.dev.platform_data = (void*) pin;
- return platform_device_register(&platform_dev);
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.h
deleted file mode 100644
index 521fad05ef..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-dwc_otg.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#ifndef _LTQ_DEV_DWC_H__
-#define _LTQ_DEV_DWC_H__
-
-#include <lantiq_platform.h>
-
-extern void __init xway_register_dwc(int pin);
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.c
deleted file mode 100644
index ea08a359ff..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mtd/physmap.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/etherdevice.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-
-#include <lantiq_soc.h>
-#include <lantiq_irq.h>
-#include <lantiq_platform.h>
-
-static u64 dmamask = (u32)0x1fffffff;
-
-static struct platform_device platform_dev = {
- .name = "ifxusb_hcd",
- .dev.dma_mask = &dmamask,
-};
-
-int __init
-xway_register_hcd(int *pins)
-{
- platform_dev.dev.platform_data = pins;
- return platform_device_register(&platform_dev);
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.h
deleted file mode 100644
index 18b3d2dae4..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-ifxhcd.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
- */
-
-#ifndef _LTQ_DEV_HCD_H__
-#define _LTQ_DEV_HCD_H__
-
-#include <lantiq_platform.h>
-
-extern void __init xway_register_hcd(int *pin);
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.c
deleted file mode 100644
index a75abe3e00..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ath5k_platform.h>
-#include <linux/ath9k_platform.h>
-#include <linux/pci.h>
-
-#include "dev-wifi-athxk.h"
-
-extern int (*ltqpci_plat_dev_init)(struct pci_dev *dev);
-struct ath5k_platform_data ath5k_pdata;
-struct ath9k_platform_data ath9k_pdata = {
- .led_pin = -1,
- .endian_check = true,
-};
-
-static int
-ath5k_pci_plat_dev_init(struct pci_dev *dev)
-{
- dev->dev.platform_data = &ath5k_pdata;
- return 0;
-}
-
-static int
-ath9k_pci_plat_dev_init(struct pci_dev *dev)
-{
- dev->dev.platform_data = &ath9k_pdata;
- return 0;
-}
-
-void __init
-ltq_register_ath5k(u16 *eeprom_data, u8 *macaddr)
-{
- ath5k_pdata.eeprom_data = eeprom_data;
- ath5k_pdata.macaddr = macaddr;
- ltqpci_plat_dev_init = ath5k_pci_plat_dev_init;
-}
-
-void __init
-ltq_register_ath9k(u16 *eeprom_data, u8 *macaddr)
-{
- memcpy(ath9k_pdata.eeprom_data, eeprom_data, sizeof(ath9k_pdata.eeprom_data));
- ath9k_pdata.macaddr = macaddr;
- ltqpci_plat_dev_init = ath9k_pci_plat_dev_init;
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.h
deleted file mode 100644
index 5fdb46b612..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-athxk.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _DEV_WIFI_ATHXK_H__
-#define _DEV_WIFI_ATHXK_H__
-
-extern void ltq_register_ath5k(u16 *eeprom_data, u8 *macaddr);
-extern void ltq_register_ath9k(u16 *eeprom_data, u8 *macaddr);
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.c
deleted file mode 100644
index 8e271f06ec..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/rt2x00_platform.h>
-#include <linux/pci.h>
-
-#include "dev-wifi-rt2x00.h"
-
-extern int (*ltqpci_plat_dev_init)(struct pci_dev *dev);
-struct rt2x00_platform_data rt2x00_pdata;
-
-static int
-rt2x00_pci_plat_dev_init(struct pci_dev *dev)
-{
- dev->dev.platform_data = &rt2x00_pdata;
- return 0;
-}
-
-void __init
-ltq_register_rt2x00(const char *firmware, const u8 *mac)
-{
- rt2x00_pdata.eeprom_file_name = kstrdup(firmware, GFP_KERNEL);
- rt2x00_pdata.mac_address = mac;
- ltqpci_plat_dev_init = rt2x00_pci_plat_dev_init;
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.h
deleted file mode 100644
index 941c26535f..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/dev-wifi-rt2x00.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _DEV_WIFI_RT2X00_H__
-#define _DEV_WIFI_RT2X00_H__
-
-extern void ltq_register_rt2x00(const char *firmware, const u8 *mac);
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/gptu.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/gptu.c
deleted file mode 100644
index ac82c37eba..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/gptu.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/pm.h>
-#include <linux/export.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <asm/reboot.h>
-
-#include <lantiq_soc.h>
-#include "../clk.h"
-
-#include "../devices.h"
-
-#define ltq_gptu_w32(x, y) ltq_w32((x), ltq_gptu_membase + (y))
-#define ltq_gptu_r32(x) ltq_r32(ltq_gptu_membase + (x))
-
-
-/* the magic ID byte of the core */
-#define GPTU_MAGIC 0x59
-/* clock control register */
-#define GPTU_CLC 0x00
-/* id register */
-#define GPTU_ID 0x08
-/* interrupt node enable */
-#define GPTU_IRNEN 0xf4
-/* interrupt control register */
-#define GPTU_IRCR 0xf8
-/* interrupt capture register */
-#define GPTU_IRNCR 0xfc
-/* there are 3 identical blocks of 2 timers. calculate register offsets */
-#define GPTU_SHIFT(x) (x % 2 ? 4 : 0)
-#define GPTU_BASE(x) (((x >> 1) * 0x20) + 0x10)
-/* timer control register */
-#define GPTU_CON(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x00)
-/* timer auto reload register */
-#define GPTU_RUN(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x08)
-/* timer manual reload register */
-#define GPTU_RLD(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x10)
-/* timer count register */
-#define GPTU_CNT(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x18)
-
-/* GPTU_CON(x) */
-#define CON_CNT BIT(2)
-#define CON_EDGE_FALL BIT(7)
-#define CON_SYNC BIT(8)
-#define CON_CLK_INT BIT(10)
-
-/* GPTU_RUN(x) */
-#define RUN_SEN BIT(0)
-#define RUN_RL BIT(2)
-
-/* set clock to runmode */
-#define CLC_RMC BIT(8)
-/* bring core out of suspend */
-#define CLC_SUSPEND BIT(4)
-/* the disable bit */
-#define CLC_DISABLE BIT(0)
-
-#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22)
-
-enum gptu_timer {
- TIMER1A = 0,
- TIMER1B,
- TIMER2A,
- TIMER2B,
- TIMER3A,
- TIMER3B
-};
-
-static struct resource ltq_gptu_resource =
- MEM_RES("GPTU", LTQ_GPTU_BASE_ADDR, LTQ_GPTU_SIZE);
-
-static void __iomem *ltq_gptu_membase;
-
-static irqreturn_t timer_irq_handler(int irq, void *priv)
-{
- int timer = irq - TIMER_INTERRUPT;
- ltq_gptu_w32(1 << timer, GPTU_IRNCR);
- return IRQ_HANDLED;
-}
-
-static void gptu_hwinit(void)
-{
- struct clk *clk = clk_get_sys("ltq_gptu", NULL);
- clk_enable(clk);
- ltq_gptu_w32(0x00, GPTU_IRNEN);
- ltq_gptu_w32(0xff, GPTU_IRNCR);
- ltq_gptu_w32(CLC_RMC | CLC_SUSPEND, GPTU_CLC);
-}
-
-static void gptu_hwexit(void)
-{
- ltq_gptu_w32(0x00, GPTU_IRNEN);
- ltq_gptu_w32(0xff, GPTU_IRNCR);
- ltq_gptu_w32(CLC_DISABLE, GPTU_CLC);
-}
-
-static int ltq_gptu_enable(struct clk *clk)
-{
- int ret = request_irq(TIMER_INTERRUPT + clk->bits, timer_irq_handler,
- IRQF_TIMER, "timer", NULL);
- if (ret) {
- pr_err("gptu: failed to request irq\n");
- return ret;
- }
-
- ltq_gptu_w32(CON_CNT | CON_EDGE_FALL | CON_SYNC | CON_CLK_INT,
- GPTU_CON(clk->bits));
- ltq_gptu_w32(1, GPTU_RLD(clk->bits));
- ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) | clk->bits, GPTU_IRNEN);
- ltq_gptu_w32(RUN_SEN | RUN_RL, GPTU_RUN(clk->bits));
- return 0;
-}
-
-static void ltq_gptu_disable(struct clk *clk)
-{
- ltq_gptu_w32(0, GPTU_RUN(clk->bits));
- ltq_gptu_w32(0, GPTU_CON(clk->bits));
- ltq_gptu_w32(0, GPTU_RLD(clk->bits));
- ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) & ~clk->bits, GPTU_IRNEN);
- free_irq(TIMER_INTERRUPT + clk->bits, NULL);
-}
-
-static inline void clkdev_add_gptu(const char *con, unsigned int timer)
-{
- struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
-
- clk->cl.dev_id = "ltq_gptu";
- clk->cl.con_id = con;
- clk->cl.clk = clk;
- clk->enable = ltq_gptu_enable;
- clk->disable = ltq_gptu_disable;
- clk->bits = timer;
- clkdev_add(&clk->cl);
-}
-
-static int __init gptu_setup(void)
-{
- /* remap gptu register range */
- ltq_gptu_membase = ltq_remap_resource(&ltq_gptu_resource);
- if (!ltq_gptu_membase)
- panic("Failed to remap gptu memory");
-
- /* power up the core */
- gptu_hwinit();
-
- /* the gptu has a ID register */
- if (((ltq_gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) {
- pr_err("gptu: failed to find magic\n");
- gptu_hwexit();
- return -ENAVAIL;
- }
-
- /* register the clocks */
- clkdev_add_gptu("timer1a", TIMER1A);
- clkdev_add_gptu("timer1b", TIMER1B);
- clkdev_add_gptu("timer2a", TIMER2A);
- clkdev_add_gptu("timer2b", TIMER2B);
- clkdev_add_gptu("timer3a", TIMER3A);
- clkdev_add_gptu("timer3b", TIMER3B);
-
- pr_info("gptu: 6 timers loaded\n");
-
- return 0;
-}
-
-arch_initcall(gptu_setup);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-arv.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-arv.c
deleted file mode 100644
index 6857e993d2..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-arv.c
+++ /dev/null
@@ -1,793 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio_buttons.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/etherdevice.h>
-#include <linux/ath5k_platform.h>
-#include <linux/ath9k_platform.h>
-#include <linux/pci.h>
-
-#include <lantiq_soc.h>
-#include <lantiq_platform.h>
-#include <dev-gpio-leds.h>
-#include <dev-gpio-buttons.h>
-
-#include "../machtypes.h"
-#include "dev-wifi-rt2x00.h"
-#include "dev-wifi-athxk.h"
-#include "devices.h"
-#include "dev-dwc_otg.h"
-#include "pci-ath-fixup.h"
-
-static struct mtd_partition arv45xx_brnboot_partitions[] =
-{
- {
- .name = "brn-boot",
- .offset = 0x0,
- .size = 0x20000,
- },
- {
- .name = "config",
- .offset = 0x20000,
- .size = 0x30000,
- },
- {
- .name = "linux",
- .offset = 0x50000,
- .size = 0x390000,
- },
- {
- .name = "reserved", /* 12-byte signature at 0x3efff4 :/ */
- .offset = 0x3e0000,
- .size = 0x010000,
- },
- {
- .name = "eeprom",
- .offset = 0x3f0000,
- .size = 0x10000,
- },
-};
-
-static struct mtd_partition arv75xx_brnboot_partitions[] =
-{
- {
- .name = "brn-boot",
- .offset = 0x0,
- .size = 0x20000,
- },
- {
- .name = "config",
- .offset = 0x20000,
- .size = 0x40000,
- },
- {
- .name = "linux",
- .offset = 0x440000,
- .size = 0x3a0000,
- },
- {
- .name = "reserved", /* 12-byte signature at 0x7efff4 :/ */
- .offset = 0x7e0000,
- .size = 0x010000,
- },
- {
- .name = "board_config",
- .offset = 0x7f0000,
- .size = 0x10000,
- },
-};
-
-/*
- * this is generic configuration for all arv based boards, note that it can be
- * rewriten in arv_load_nor()
- */
-static struct mtd_partition arv_partitions[] =
-{
- {
- .name = "uboot",
- .offset = 0x0,
- .size = 0x20000,
- },
- {
- .name = "uboot_env",
- .offset = 0x20000,
- .size = 0x10000,
- },
- {
- .name = "linux",
- .offset = 0x30000,
- .size = 0x3c0000,
- },
- {
- .name = "board_config",
- .offset = 0x3f0000,
- .size = 0x10000,
- },
-};
-
-static struct physmap_flash_data arv45xx_brnboot_flash_data = {
- .nr_parts = ARRAY_SIZE(arv45xx_brnboot_partitions),
- .parts = arv45xx_brnboot_partitions,
-};
-
-static struct physmap_flash_data arv75xx_brnboot_flash_data = {
- .nr_parts = ARRAY_SIZE(arv75xx_brnboot_partitions),
- .parts = arv75xx_brnboot_partitions,
-};
-
-static struct physmap_flash_data arv_flash_data = {
- .nr_parts = ARRAY_SIZE(arv_partitions),
- .parts = arv_partitions,
-};
-
-static struct ltq_pci_data ltq_pci_data = {
- .clock = PCI_CLOCK_EXT,
- .gpio = PCI_GNT1 | PCI_REQ1,
- .irq = {
- [14] = INT_NUM_IM0_IRL0 + 22,
- },
-};
-
-static struct ltq_eth_data ltq_eth_data = {
- .mii_mode = PHY_INTERFACE_MODE_RMII,
-};
-
-static struct gpio_led
-arv4510pw_gpio_leds[] __initdata = {
- { .name = "soc:green:foo", .gpio = 4, .active_low = 1, },
-};
-
-static struct gpio_led
-arv4518pw_gpio_leds[] __initdata = {
- { .name = "soc:green:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:wifi", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:fail", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:usb", .gpio = 19, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:voip", .gpio = 100, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:fxs1", .gpio = 101, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:fxs2", .gpio = 102, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" },
-};
-
-static struct gpio_keys_button
-arv4518pw_gpio_keys[] __initdata = {
- {
- .desc = "wifi",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 28,
- .active_low = 1,
- },
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 30,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 29,
- .active_low = 1,
- },
-};
-
-static struct gpio_led
-arv4519pw_gpio_leds[] __initdata = {
- { .name = "soc:red:power", .gpio = 7, .active_low = 1, },
- { .name = "soc:green:power", .gpio = 2, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:wifi", .gpio = 6, .active_low = 1, },
- { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, },
- { .name = "soc:green:internet", .gpio = 5, .active_low = 1, },
- { .name = "soc:red:internet", .gpio = 8, .active_low = 1, },
- { .name = "soc:green:voip", .gpio = 100, .active_low = 1, },
- { .name = "soc:green:phone1", .gpio = 101, .active_low = 1, },
- { .name = "soc:green:phone2", .gpio = 102, .active_low = 1, },
- { .name = "soc:green:fxo", .gpio = 103, .active_low = 1, },
- { .name = "soc:green:usb", .gpio = 19, .active_low = 1, },
- { .name = "soc:orange:wps", .gpio = 104, .active_low = 1, },
- { .name = "soc:green:wps", .gpio = 105, .active_low = 1, },
- { .name = "soc:red:wps", .gpio = 106, .active_low = 1, },
-
-};
-
-static struct gpio_keys_button
-arv4519pw_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 30,
- .active_low = 1,
- },
- {
- .desc = "wlan",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 28,
- .active_low = 1,
- },
-};
-
-static struct gpio_led
-arv4520pw_gpio_leds[] __initdata = {
- { .name = "soc:blue:power", .gpio = 3, .active_low = 1, },
- { .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, },
- { .name = "soc:blue:internet", .gpio = 5, .active_low = 1, },
- { .name = "soc:red:power", .gpio = 6, .active_low = 1, },
- { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, },
- { .name = "soc:red:wps", .gpio = 9, .active_low = 1, },
- { .name = "soc:blue:voip", .gpio = 100, .active_low = 1, },
- { .name = "soc:blue:fxs1", .gpio = 101, .active_low = 1, },
- { .name = "soc:blue:fxs2", .gpio = 102, .active_low = 1, },
- { .name = "soc:blue:fxo", .gpio = 103, .active_low = 1, },
- { .name = "soc:blue:voice", .gpio = 104, .active_low = 1, },
- { .name = "soc:blue:usb", .gpio = 105, .active_low = 1, },
- { .name = "soc:blue:wifi", .gpio = 106, .active_low = 1, },
-};
-
-static struct gpio_led
-arv452cpw_gpio_leds[] __initdata = {
- { .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:isdn", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:wps", .gpio = 9, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:fxs1", .gpio = 100, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:fxs2", .gpio = 101, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:wps", .gpio = 102, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:voice", .gpio = 104, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:usb", .gpio = 105, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:wifi", .gpio = 106, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:internet", .gpio = 108, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:internet", .gpio = 109, .active_low = 1, .default_trigger = "default-on" },
-};
-
-static struct gpio_led
-arv4525pw_gpio_leds[] __initdata = {
- { .name = "soc:green:dsl", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:wifi", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:online", .gpio = 9, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:fxs-internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:fxs-festnetz", .gpio = 4, .active_low = 1, .default_trigger = "default-on" },
-};
-
-#define ARV4525PW_PHYRESET 13
-#define ARV4525PW_RELAY 31
-
-static struct gpio
-arv4525pw_gpios[] __initdata = {
- { ARV4525PW_PHYRESET, GPIOF_OUT_INIT_HIGH, "phyreset" },
- { ARV4525PW_RELAY, GPIOF_OUT_INIT_HIGH, "relay" },
-};
-
-
-static struct gpio_led
-arv752dpw22_gpio_leds[] __initdata = {
- { .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:wps", .gpio = 8, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:voice", .gpio = 104, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:usb", .gpio = 105, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:wifi", .gpio = 106, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:wifi1", .gpio = 107, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:wifi", .gpio = 108, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:blue:wifi1", .gpio = 109, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:eth1", .gpio = 111, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:eth2", .gpio = 112, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:eth3", .gpio = 113, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:eth4", .gpio = 114, .active_low = 1, .default_trigger = "default-on", },
-};
-
-static struct gpio_keys_button
-arv752dpw22_gpio_keys[] __initdata = {
- {
- .desc = "btn0",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 12,
- .active_low = 1,
- },
- {
- .desc = "btn1",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 13,
- .active_low = 1,
- },
- {
- .desc = "btn2",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 28,
- .active_low = 1,
- },
-};
-
-static struct gpio_led
-arv7518pw_gpio_leds[] __initdata = {
- { .name = "soc:red:power", .gpio = 7, .active_low = 1, },
- { .name = "soc:green:power", .gpio = 2, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:wifi", .gpio = 6, .active_low = 1, },
- { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, },
- { .name = "soc:green:internet", .gpio = 5, .active_low = 1, },
- { .name = "soc:red:internet", .gpio = 8, .active_low = 1, },
- { .name = "soc:green:voip", .gpio = 100, .active_low = 1, },
- { .name = "soc:green:phone1", .gpio = 101, .active_low = 1, },
- { .name = "soc:green:phone2", .gpio = 102, .active_low = 1, },
- { .name = "soc:orange:fail", .gpio = 103, .active_low = 1, },
- { .name = "soc:green:usb", .gpio = 19, .active_low = 1, },
- { .name = "soc:orange:wps", .gpio = 104, .active_low = 1, },
- { .name = "soc:green:wps", .gpio = 105, .active_low = 1, },
- { .name = "soc:red:wps", .gpio = 106, .active_low = 1, },
-
-};
-
-static struct gpio_keys_button
-arv7518pw_gpio_keys[] __initdata = {
- /*{
- .desc = "reset",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 23,
- .active_low = 1,
- },*/
- {
- .desc = "wifi",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 25,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button
-arv7525pw_gpio_keys[] __initdata = {
- {
- .desc = "restart",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 29,
- .active_low = 1,
- },
-};
-
-static void __init
-arv_load_nor(unsigned int max)
-{
-#define UBOOT_MAGIC 0x27051956
-
- int i;
- int sector = -1;
-
- if (ltq_brn_boot) {
- if (max == 0x800000)
- ltq_register_nor(&arv75xx_brnboot_flash_data);
- else
- ltq_register_nor(&arv45xx_brnboot_flash_data);
- return;
- }
-
- for (i = 1; i < 4 && sector < 0; i++) {
- unsigned int uboot_magic;
- memcpy_fromio(&uboot_magic, (void *)KSEG1ADDR(LTQ_FLASH_START) + (i * 0x10000), 4);
- if (uboot_magic == UBOOT_MAGIC)
- sector = i;
- }
-
- if (sector < 0)
- return;
-
- arv_partitions[0].size = arv_partitions[1].offset = (sector - 1) * 0x10000;
- arv_partitions[2].offset = arv_partitions[0].size + 0x10000;
- arv_partitions[2].size = max - arv_partitions[2].offset - 0x10000;
- arv_partitions[3].offset = max - 0x10000;
- ltq_register_nor(&arv_flash_data);
-}
-
-static void __init
-arv_register_ethernet(unsigned int mac_addr)
-{
- memcpy_fromio(&ltq_eth_data.mac.sa_data,
- (void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6);
- ltq_register_etop(&ltq_eth_data);
-}
-
-static u16 arv_ath5k_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS];
-static u16 arv_ath9k_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
-static u8 arv_athxk_eeprom_mac[6];
-
-static void __init
-arv_register_ath5k(unsigned int ath_addr, unsigned int mac_addr)
-{
- int i;
-
- memcpy_fromio(arv_athxk_eeprom_mac,
- (void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6);
- arv_athxk_eeprom_mac[5]++;
- memcpy_fromio(arv_ath5k_eeprom_data,
- (void *)KSEG1ADDR(LTQ_FLASH_START + ath_addr), ATH5K_PLAT_EEP_MAX_WORDS);
- // swap eeprom bytes
- for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS>>1; i++) {
- arv_ath5k_eeprom_data[i] = swab16(arv_ath5k_eeprom_data[i]);
- if (i == 0x17e>>1) {
- /*
- * regdomain is invalid. it's unknown how did original
- * fw convered value to 0x82d4 so for now force to 0x67
- */
- arv_ath5k_eeprom_data[i] &= 0x0000;
- arv_ath5k_eeprom_data[i] |= 0x67;
- }
- }
-}
-
-static void __init
-arv_register_ath9k(unsigned int ath_addr, unsigned int mac_addr)
-{
- int i;
- u16 *eepdata, sum, el;
-
- memcpy_fromio(arv_athxk_eeprom_mac,
- (void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6);
- arv_athxk_eeprom_mac[5]++;
- memcpy_fromio(arv_ath9k_eeprom_data,
- (void *)KSEG1ADDR(LTQ_FLASH_START + ath_addr), ATH9K_PLAT_EEP_MAX_WORDS);
-
- // force regdomain to 0x67
- arv_ath9k_eeprom_data[0x208>>1] = 0x67;
-
- // calculate new checksum
- sum = arv_ath9k_eeprom_data[0x200>>1];
- el = sum / sizeof(u16) - 2; /* skip length and (old) checksum */
- eepdata = (u16 *) (&arv_ath9k_eeprom_data[0x204>>1]); /* after checksum */
- for (i = 0; i < el; i++)
- sum ^= *eepdata++;
- sum ^= 0xffff;
- arv_ath9k_eeprom_data[0x202>>1] = sum;
-}
-
-static void __init
-arv3527p_init(void)
-{
-#define ARV3527P_MAC_ADDR 0x3f0016
-
- ltq_register_gpio_stp();
- // ltq_add_device_gpio_leds(arv3527p_gpio_leds, ARRAY_SIZE(arv3527p_gpio_leds));
- arv_load_nor(0x400000);
- arv_register_ethernet(ARV3527P_MAC_ADDR);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV3527P,
- "ARV3527P",
- "ARV3527P - Arcor Easybox 401",
- arv3527p_init);
-
-static void __init
-arv4510pw_init(void)
-{
-#define ARV4510PW_MAC_ADDR 0x3f0014
-
- ltq_register_gpio_stp();
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4510pw_gpio_leds), arv4510pw_gpio_leds);
- arv_load_nor(0x400000);
- ltq_pci_data.irq[12] = (INT_NUM_IM2_IRL0 + 31);
- ltq_pci_data.irq[15] = (INT_NUM_IM0_IRL0 + 26);
- ltq_pci_data.gpio |= PCI_EXIN2 | PCI_REQ2;
- ltq_register_pci(&ltq_pci_data);
- arv_register_ethernet(ARV4510PW_MAC_ADDR);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV4510PW,
- "ARV4510PW",
- "ARV4510PW - Wippies Homebox",
- arv4510pw_init);
-
-static void __init
-arv4518pw_init(void)
-{
-#define ARV4518PW_EBU 0
-#define ARV4518PW_USB 14
-#define ARV4518PW_SWITCH_RESET 13
-#define ARV4518PW_ATH_ADDR 0x3f0400
-#define ARV4518PW_MAC_ADDR 0x3f0016
-
- ltq_register_gpio_ebu(ARV4518PW_EBU);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4518pw_gpio_leds), arv4518pw_gpio_leds);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(arv4518pw_gpio_keys), arv4518pw_gpio_keys);
- arv_load_nor(0x400000);
- ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ2;
- ltq_register_pci(&ltq_pci_data);
- xway_register_dwc(ARV4518PW_USB);
- arv_register_ethernet(ARV4518PW_MAC_ADDR);
- arv_register_ath5k(ARV4518PW_ATH_ADDR, ARV4518PW_MAC_ADDR);
- ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac);
- ltq_register_tapi();
-
- gpio_request(ARV4518PW_SWITCH_RESET, "switch");
- gpio_direction_output(ARV4518PW_SWITCH_RESET, 1);
- gpio_export(ARV4518PW_SWITCH_RESET, 0);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV4518PW,
- "ARV4518PW",
- "ARV4518PW - SMC7908A-ISP, Airties WAV-221",
- arv4518pw_init);
-
-static void __init
-arv4519pw_init(void)
-{
-#define ARV4519PW_EBU 0
-#define ARV4519PW_USB 14
-#define ARV4519PW_RELAY 31
-#define ARV4519PW_SWITCH_RESET 13
-#define ARV4519PW_ATH_ADDR 0x3f0400
-#define ARV4519PW_MAC_ADDR 0x3f0016
-
- arv_load_nor(0x400000);
- ltq_register_gpio_ebu(ARV4519PW_EBU);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4519pw_gpio_leds), arv4519pw_gpio_leds);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(arv4519pw_gpio_keys), arv4519pw_gpio_keys);
- ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ1;
- ltq_register_pci(&ltq_pci_data);
- xway_register_dwc(ARV4519PW_USB);
- arv_register_ethernet(ARV4519PW_MAC_ADDR);
- arv_register_ath5k(ARV4519PW_ATH_ADDR, ARV4519PW_MAC_ADDR);
- ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac);
- ltq_register_tapi();
-
- gpio_request(ARV4519PW_RELAY, "relay");
- gpio_direction_output(ARV4519PW_RELAY, 1);
- gpio_export(ARV4519PW_RELAY, 0);
-
- gpio_request(ARV4519PW_SWITCH_RESET, "switch");
- gpio_set_value(ARV4519PW_SWITCH_RESET, 1);
- gpio_export(ARV4519PW_SWITCH_RESET, 0);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV4519PW,
- "ARV4519PW",
- "ARV4519PW - Vodafone, Pirelli",
- arv4519pw_init);
-
-static void __init
-arv4520pw_init(void)
-{
-#define ARV4520PW_EBU 0x400
-#define ARV4520PW_USB 28
-#define ARV4520PW_SWITCH_RESET 110
-#define ARV4520PW_MAC_ADDR 0x3f0016
-
- ltq_register_gpio_ebu(ARV4520PW_EBU);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4520pw_gpio_leds), arv4520pw_gpio_leds);
- arv_load_nor(0x400000);
- ltq_register_pci(&ltq_pci_data);
- ltq_register_tapi();
- arv_register_ethernet(ARV4520PW_MAC_ADDR);
- ltq_register_rt2x00(NULL, (const u8 *) ltq_eth_data.mac.sa_data);
- xway_register_dwc(ARV4520PW_USB);
- ltq_register_tapi();
-
- gpio_request(ARV4520PW_SWITCH_RESET, "switch");
- gpio_set_value(ARV4520PW_SWITCH_RESET, 1);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV4520PW,
- "ARV4520PW",
- "ARV4520PW - Airties WAV-281, Arcor A800",
- arv4520pw_init);
-
-static void __init
-arv452Cpw_init(void)
-{
-#define ARV452CPW_EBU 0x77f
-#define ARV452CPW_USB 28
-#define ARV452CPW_RELAY1 31
-#define ARV452CPW_RELAY2 107
-#define ARV452CPW_SWITCH_RESET 110
-#define ARV452CPW_ATH_ADDR 0x3f0400
-#define ARV452CPW_MAC_ADDR 0x3f0016
-
- ltq_register_gpio_ebu(ARV452CPW_EBU);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv452cpw_gpio_leds), arv452cpw_gpio_leds);
- arv_load_nor(0x400000);
- ltq_register_pci(&ltq_pci_data);
- xway_register_dwc(ARV452CPW_USB);
- arv_register_ethernet(ARV452CPW_MAC_ADDR);
- arv_register_ath5k(ARV452CPW_ATH_ADDR, ARV452CPW_MAC_ADDR);
- ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac);
- ltq_register_tapi();
-
- gpio_request(ARV452CPW_SWITCH_RESET, "switch");
- gpio_set_value(ARV452CPW_SWITCH_RESET, 1);
- gpio_export(ARV452CPW_SWITCH_RESET, 0);
-
- gpio_request(ARV452CPW_RELAY1, "relay1");
- gpio_direction_output(ARV452CPW_RELAY1, 1);
- gpio_export(ARV452CPW_RELAY1, 0);
-
- gpio_request(ARV452CPW_RELAY2, "relay2");
- gpio_set_value(ARV452CPW_RELAY2, 1);
- gpio_export(ARV452CPW_RELAY2, 0);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV452CPW,
- "ARV452CPW",
- "ARV452CPW - Arcor A801",
- arv452Cpw_init);
-
-static void __init
-arv4525pw_init(void)
-{
-#define ARV4525PW_ATH_ADDR 0x3f0400
-#define ARV4525PW_MAC_ADDR 0x3f0016
-
- arv_load_nor(0x400000);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds);
- gpio_request_array(arv4525pw_gpios, ARRAY_SIZE(arv4525pw_gpios));
- gpio_export(ARV4525PW_RELAY, false);
- gpio_export(ARV4525PW_PHYRESET, false);
- ltq_pci_data.clock = PCI_CLOCK_INT;
- ltq_register_pci(&ltq_pci_data);
- arv_register_ath5k(ARV4525PW_ATH_ADDR, ARV4525PW_MAC_ADDR);
- ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac);
- ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII;
- arv_register_ethernet(ARV4525PW_MAC_ADDR);
- ltq_register_tapi();
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV4525PW,
- "ARV4525PW",
- "ARV4525PW - Speedport W502V",
- arv4525pw_init);
-
-static void __init
-arv7525pw_init(void)
-{
-#define ARV7525P_MAC_ADDR 0x3f0016
-
- arv_load_nor(0x400000);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(arv7525pw_gpio_keys), arv7525pw_gpio_keys);
- ltq_pci_data.clock = PCI_CLOCK_INT;
- ltq_pci_data.gpio = PCI_GNT1 | PCI_EXIN1;
- ltq_pci_data.irq[14] = (INT_NUM_IM3_IRL0 + 31);
- ltq_register_pci(&ltq_pci_data);
- ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII;
- ltq_register_rt2x00("RT2860.eeprom", NULL);
- ltq_register_tapi();
- arv_register_ethernet(ARV7525P_MAC_ADDR);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV7525PW,
- "ARV7525PW",
- "ARV7525PW - Speedport W303V",
- arv7525pw_init);
-
-static void __init
-arv7518pw_init(void)
-{
-#define ARV7518PW_EBU 0x2
-#define ARV7518PW_USB 14
-#define ARV7518PW_SWITCH_RESET 13
-#define ARV7518PW_ATH_ADDR 0x7f0400
-#define ARV7518PW_MAC_ADDR 0x7f0016
-
- arv_load_nor(0x800000);
- ltq_register_gpio_ebu(ARV7518PW_EBU);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv7518pw_gpio_leds), arv7518pw_gpio_leds);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(arv7518pw_gpio_keys), arv7518pw_gpio_keys);
- ltq_register_pci(&ltq_pci_data);
- ltq_register_tapi();
- xway_register_dwc(ARV7518PW_USB);
- arv_register_ethernet(ARV7518PW_MAC_ADDR);
- arv_register_ath9k(ARV7518PW_ATH_ADDR, ARV7518PW_MAC_ADDR);
- ltq_register_ath9k(arv_ath9k_eeprom_data, arv_athxk_eeprom_mac);
- ltq_pci_ath_fixup(14, arv_ath9k_eeprom_data);
- ltq_register_tapi();
-
- gpio_request(ARV7518PW_SWITCH_RESET, "switch");
- gpio_direction_output(ARV7518PW_SWITCH_RESET, 1);
- gpio_export(ARV7518PW_SWITCH_RESET, 0);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV7518PW,
- "ARV7518PW",
- "ARV7518PW - ASTORIA",
- arv7518pw_init);
-
-static void __init
-arv752dpw22_init(void)
-{
-#define ARV752DPW22_EBU 0x2
-#define ARV752DPW22_USB 100
-#define ARV752DPW22_RELAY 101
-#define ARV752DPW22_MAC_ADDR 0x7f0016
-
- arv_load_nor(0x800000);
- ltq_register_gpio_ebu(ARV752DPW22_EBU);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv752dpw22_gpio_leds), arv752dpw22_gpio_leds);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(arv752dpw22_gpio_keys), arv752dpw22_gpio_keys);
- ltq_pci_data.irq[15] = (INT_NUM_IM3_IRL0 + 31);
- ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2;
- ltq_register_pci(&ltq_pci_data);
- xway_register_dwc(ARV752DPW22_USB);
- arv_register_ethernet(ARV752DPW22_MAC_ADDR);
- ltq_register_tapi();
-
- gpio_request(ARV752DPW22_RELAY, "relay");
- gpio_set_value(ARV752DPW22_RELAY, 1);
- gpio_export(ARV752DPW22_RELAY, 0);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV752DPW22,
- "ARV752DPW22",
- "ARV752DPW22 - Arcor A803",
- arv752dpw22_init);
-
-static void __init
-arv752dpw_init(void)
-{
-#define ARV752DPW22_EBU 0x2
-#define ARV752DPW22_USB 100
-#define ARV752DPW22_RELAY 101
-#define ARV752DPW22_MAC_ADDR 0x7f0016
-
- arv_load_nor(0x800000);
- ltq_register_gpio_ebu(ARV752DPW22_EBU);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv752dpw22_gpio_leds), arv752dpw22_gpio_leds);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(arv752dpw22_gpio_keys), arv752dpw22_gpio_keys);
- ltq_pci_data.irq[14] = (INT_NUM_IM3_IRL0 + 31);
- ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2;
- ltq_register_pci(&ltq_pci_data);
- ltq_register_tapi();
- xway_register_dwc(ARV752DPW22_USB);
- ltq_register_rt2x00("RT2860.eeprom", NULL);
- arv_register_ethernet(ARV752DPW22_MAC_ADDR);
- gpio_request(ARV752DPW22_RELAY, "relay");
- gpio_set_value(ARV752DPW22_RELAY, 1);
- gpio_export(ARV752DPW22_RELAY, 0);
-
-}
-
-MIPS_MACHINE(LANTIQ_MACH_ARV752DPW,
- "ARV752DPW",
- "ARV752DPW - Arcor A802",
- arv752dpw_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-bthomehubv2b.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-bthomehubv2b.c
deleted file mode 100644
index 44fe2f4efe..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-bthomehubv2b.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 Andrej Vlašić
- * Copyright (C) 2011 Luka Perkov
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/ath5k_platform.h>
-#include <linux/ath9k_platform.h>
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/io.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-
-#include <irq.h>
-#include <lantiq_soc.h>
-#include <lantiq_platform.h>
-#include <dev-gpio-leds.h>
-#include <dev-gpio-buttons.h>
-
-#include "../machtypes.h"
-//#include "dev-wifi-ath9k.h"
-#include "devices.h"
-#include "dev-dwc_otg.h"
-
-#undef USE_BTHH_GPIO_INIT
-
-// this reads certain data from u-boot if it's there
-#define USE_UBOOT_ENV_DATA
-
-#define UBOOT_ENV_OFFSET 0x040000
-#define UBOOT_ENV_SIZE 0x010000
-
-#ifdef NAND_ORGLAYOUT
-// this is only here for reference
-// definition of NAND flash area
-static struct mtd_partition bthomehubv2b_nand_partitions[] =
-{
- {
- .name = "ART",
- .offset = 0x0000000,
- .size = 0x0004000,
- },
- {
- .name = "image1",
- .offset = 0x0004000,
- .size = 0x0E00000,
- },
- {
- .name = "unknown1",
- .offset = 0x0E04000,
- .size = 0x00FC000,
- },
- {
- .name = "image2",
- .offset = 0x0F00000,
- .size = 0x0E00000,
- },
- {
- .name = "unknown2",
- .offset = 0x1D00000,
- .size = 0x0300000,
- },
-
-};
-#endif
-
-#ifdef NAND_KEEPOPENRG
-// this allows both firmwares to co-exist
-
-static struct mtd_partition bthomehubv2b_nand_partitions[] =
-{
- {
- .name = "art",
- .offset = 0x0000000,
- .size = 0x0004000,
- },
- {
- .name = "Image1",
- .offset = 0x0004000,
- .size = 0x0E00000,
- },
- {
- .name = "linux",
- .offset = 0x0E04000,
- .size = 0x11fC000,
- },
- {
- .name = "wholeflash",
- .offset = 0x0000000,
- .size = 0x2000000,
- },
-
-};
-#endif
-
-// this gives more jffs2 by overwriting openrg
-
-static struct mtd_partition bthomehubv2b_nand_partitions[] =
-{
- {
- .name = "art",
- .offset = 0x0000000,
- .size = 0x0004000,
- },
- {
- .name = "linux",
- .offset = 0x0004000,
- .size = 0x1ffC000,
- },
- {
- .name = "wholeflash",
- .offset = 0x0000000,
- .size = 0x2000000,
- },
-
-};
-
-extern void __init xway_register_nand(struct mtd_partition *parts, int count);
-
-// end BTHH_USE_NAND
-
-static struct gpio_led
-bthomehubv2b_gpio_leds[] __initdata = {
-
- { .name = "soc:orange:upgrading", .gpio = 213, },
- { .name = "soc:orange:phone", .gpio = 214, },
- { .name = "soc:blue:phone", .gpio = 215, },
- { .name = "soc:orange:wireless", .gpio = 216, },
- { .name = "soc:blue:wireless", .gpio = 217, },
- { .name = "soc:red:broadband", .gpio = 218, },
- { .name = "soc:orange:broadband", .gpio = 219, },
- { .name = "soc:blue:broadband", .gpio = 220, },
- { .name = "soc:red:power", .gpio = 221, },
- { .name = "soc:orange:power", .gpio = 222, },
- { .name = "soc:blue:power", .gpio = 223, },
-};
-
-static struct gpio_keys_button
-bthomehubv2b_gpio_keys[] __initdata = {
- {
- .desc = "restart",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 2,
- .active_low = 1,
- },
- {
- .desc = "findhandset",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 15,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 22,
- .active_low = 1,
- },
-};
-
-// definition of NOR flash area - as per original.
-static struct mtd_partition bthomehubv2b_partitions[] =
-{
- {
- .name = "uboot",
- .offset = 0x000000,
- .size = 0x040000,
- },
- {
- .name = "uboot_env",
- .offset = UBOOT_ENV_OFFSET,
- .size = UBOOT_ENV_SIZE,
- },
- {
- .name = "rg_conf_1",
- .offset = 0x050000,
- .size = 0x010000,
- },
- {
- .name = "rg_conf_2",
- .offset = 0x060000,
- .size = 0x010000,
- },
- {
- .name = "rg_conf_factory",
- .offset = 0x070000,
- .size = 0x010000,
- },
-};
-
-
-/* nor flash */
-/* bt homehubv2b has a very small nor flash */
-/* so make it look for a small one, else we get a lot of alias chips identified - */
-/* not a bug problem, but fills the logs. */
-static struct resource bthhv2b_nor_resource =
- MEM_RES("nor", LTQ_FLASH_START, 0x80000);
-
-static struct platform_device ltq_nor = {
- .name = "ltq_nor",
- .resource = &bthhv2b_nor_resource,
- .num_resources = 1,
-};
-
-static void __init bthhv2b_register_nor(struct physmap_flash_data *data)
-{
- ltq_nor.dev.platform_data = data;
- platform_device_register(&ltq_nor);
-}
-
-static struct physmap_flash_data bthomehubv2b_flash_data = {
- .nr_parts = ARRAY_SIZE(bthomehubv2b_partitions),
- .parts = bthomehubv2b_partitions,
-};
-
-
-
-
-static struct ltq_pci_data ltq_pci_data = {
- .clock = PCI_CLOCK_INT,
- .gpio = PCI_GNT1 | PCI_REQ1,
- .irq = { [14] = INT_NUM_IM0_IRL0 + 22, },
-};
-
-
-
-
-static struct ltq_eth_data ltq_eth_data = {
- .mii_mode = PHY_INTERFACE_MODE_MII,
-};
-
-
-
-
-static char __init *get_uboot_env_var(char *haystack, int haystack_len, char *needle, int needle_len) {
- int i;
- for (i = 0; i <= haystack_len - needle_len; i++) {
- if (memcmp(haystack + i, needle, needle_len) == 0) {
- return haystack + i + needle_len;
- }
- }
- return NULL;
-}
-
-/*
- * bthomehubv2b_parse_hex_* are not uniq. in arm/orion there are also duplicates:
- * dns323_parse_hex_*
- * TODO: one day write a patch for this :)
- */
-static int __init bthomehubv2b_parse_hex_nibble(char n) {
- if (n >= '0' && n <= '9')
- return n - '0';
-
- if (n >= 'A' && n <= 'F')
- return n - 'A' + 10;
-
- if (n >= 'a' && n <= 'f')
- return n - 'a' + 10;
-
- return -1;
-}
-
-static int __init bthomehubv2b_parse_hex_byte(const char *b) {
- int hi;
- int lo;
-
- hi = bthomehubv2b_parse_hex_nibble(b[0]);
- lo = bthomehubv2b_parse_hex_nibble(b[1]);
-
- if (hi < 0 || lo < 0)
- return -1;
-
- return (hi << 4) | lo;
-}
-
-static int __init bthomehubv2b_register_ethernet(void) {
- u_int8_t addr[6];
- int i;
- char *mac = "01:02:03:04:05:06";
- int gotmac = 0;
- char *boardid = "BTHHV2B";
- int gotboardid = 0;
-
- char *uboot_env_page;
- uboot_env_page = ioremap(LTQ_FLASH_START + UBOOT_ENV_OFFSET, UBOOT_ENV_SIZE);
- if (uboot_env_page)
- {
- char *Data = NULL;
- Data = get_uboot_env_var(uboot_env_page, UBOOT_ENV_SIZE, "\0ethaddr=", 9);
- if (Data)
- {
- mac = Data;
- }
-
- Data = get_uboot_env_var(uboot_env_page, UBOOT_ENV_SIZE, "\0boardid=", 9);
-
- if (Data)
- boardid = Data;
- }
- else
- {
- printk("bthomehubv2b: Failed to get uboot_env_page");
- }
-
- if (!mac) {
- goto error_fail;
- }
-
- if (!boardid) {
- goto error_fail;
- }
-
- /* Sanity check the string we're looking at */
- for (i = 0; i < 5; i++) {
- if (*(mac + (i * 3) + 2) != ':') {
- goto error_fail;
- }
- }
-
- for (i = 0; i < 6; i++) {
- int byte;
- byte = bthomehubv2b_parse_hex_byte(mac + (i * 3));
- if (byte < 0) {
- goto error_fail;
- }
- addr[i] = byte;
- }
-
- if (gotmac)
- printk("bthomehubv2b: Found ethernet MAC address: ");
- else
- printk("bthomehubv2b: using default MAC (pls set ethaddr in u-boot): ");
-
- for (i = 0; i < 6; i++)
- printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
- memcpy(&ltq_eth_data.mac.sa_data, addr, 6);
- ltq_register_etop(&ltq_eth_data);
-
- //memcpy(&bthomehubv2b_ath5k_eeprom_mac, addr, 6);
- //bthomehubv2b_ath5k_eeprom_mac[5]++;
-
- if (gotboardid)
- printk("bthomehubv2b: Board id is %s.", boardid);
- else
- printk("bthomehubv2b: Default Board id is %s.", boardid);
-
- if (strncmp(boardid, "BTHHV2B", 7) == 0) {
- // read in dev-wifi-ath9k
- //memcpy(&bthomehubv2b_ath5k_eeprom_data, sx763_eeprom_data, ATH5K_PLAT_EEP_MAX_WORDS);
- }
- else {
- printk("bthomehubv2b: Board id is unknown, fix uboot_env data.");
- }
-
-
- // should not unmap while we are using the ram?
- if (uboot_env_page)
- iounmap(uboot_env_page);
-
- return 0;
-
-error_fail:
- if (uboot_env_page)
- iounmap(uboot_env_page);
- return -EINVAL;
-}
-
-
-#define PORTA2_HW_PASS1 0
-#define PORTA2_HW_PASS1_SC14480 1
-#define PORTA2_HW_PASS2 2
-
-int porta2_hw_revision = -1;
-EXPORT_SYMBOL(porta2_hw_revision);
-
-#define LTQ_GPIO_OUT 0x00
-#define LTQ_GPIO_IN 0x04
-#define LTQ_GPIO_DIR 0x08
-#define LTQ_GPIO_ALTSEL0 0x0C
-#define LTQ_GPIO_ALTSEL1 0x10
-#define LTQ_GPIO_OD 0x14
-#define LTQ_GPIO_PUDSEL 0x1C
-#define LTQ_GPIO_PUDEN 0x20
-
-#ifdef USE_BTHH_GPIO_INIT
-static void bthomehubv2b_board_prom_init(void)
-{
- int revision = 0;
- unsigned int gpio = 0;
- void __iomem *mem = ioremap(LTQ_GPIO0_BASE_ADDR, LTQ_GPIO_SIZE*2);
-
-#define DANUBE_GPIO_P0_OUT (unsigned short *)(mem + LTQ_GPIO_OUT)
-#define DANUBE_GPIO_P0_IN (unsigned short *)(mem + LTQ_GPIO_IN)
-#define DANUBE_GPIO_P0_DIR (unsigned short *)(mem + LTQ_GPIO_DIR)
-#define DANUBE_GPIO_P0_ALTSEL0 (unsigned short *)(mem + LTQ_GPIO_ALTSEL0)
-#define DANUBE_GPIO_P0_ALTSEL1 (unsigned short *)(mem + LTQ_GPIO_ALTSEL1)
-
-#define DANUBE_GPIO_P1_OUT (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_OUT)
-#define DANUBE_GPIO_P1_IN (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_IN)
-#define DANUBE_GPIO_P1_DIR (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_DIR)
-#define DANUBE_GPIO_P1_ALTSEL0 (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_ALTSEL0)
-#define DANUBE_GPIO_P1_ALTSEL1 (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_ALTSEL1)
-#define DANUBE_GPIO_P1_OD (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_OD)
-
- printk("About to sense board using GPIOs at %8.8X\n", (unsigned int)mem);
-
-
- /* First detect HW revision of the board. For that we need to set the GPIO
- * lines according to table 7.2.1/7.2.2 in HSI */
- *DANUBE_GPIO_P0_OUT = 0x0200;
- *DANUBE_GPIO_P0_DIR = 0x2610;
- *DANUBE_GPIO_P0_ALTSEL0 = 0x7812;
- *DANUBE_GPIO_P0_ALTSEL1 = 0x0000;
-
- *DANUBE_GPIO_P1_OUT = 0x7008;
- *DANUBE_GPIO_P1_DIR = 0xF3AE;
- *DANUBE_GPIO_P1_ALTSEL0 = 0x83A7;
- *DANUBE_GPIO_P1_ALTSEL1 = 0x0400;
-
- gpio = (*DANUBE_GPIO_P0_IN & 0xFFFF) |
- ((*DANUBE_GPIO_P1_IN & 0xFFFF) << 16);
-
- revision |= (gpio & (1 << 27)) ? (1 << 0) : 0;
- revision |= (gpio & (1 << 20)) ? (1 << 1) : 0;
- revision |= (gpio & (1 << 8)) ? (1 << 2) : 0;
- revision |= (gpio & (1 << 6)) ? (1 << 3) : 0;
- revision |= (gpio & (1 << 5)) ? (1 << 4) : 0;
- revision |= (gpio & (1 << 0)) ? (1 << 5) : 0;
-
- porta2_hw_revision = revision;
- printk("PORTA2: detected HW revision %d\n", revision);
-
- /* Set GPIO lines according to HW revision. */
- /* !!! Note that we are setting SPI_CS5 (GPIO 9) to be GPIO out with value
- * of HIGH since the FXO does not use the SPI CS mechanism, it does it
- * manually by controlling the GPIO line. We need the CS line to be disabled
- * (HIGH) until needed since it will intefere with other devices on the SPI
- * bus. */
- *DANUBE_GPIO_P0_OUT = 0x0200;
- /*
- * During the manufacturing process a different machine takes over uart0
- * so set it as input (so it wouldn't drive the line)
- */
-#define cCONFIG_SHC_BT_MFG_TEST 0
- *DANUBE_GPIO_P0_DIR = 0x2671 | (cCONFIG_SHC_BT_MFG_TEST ? 0 : (1 << 12));
-
- if (revision == PORTA2_HW_PASS1_SC14480 || revision == PORTA2_HW_PASS2)
- *DANUBE_GPIO_P0_ALTSEL0 = 0x7873;
- else
- *DANUBE_GPIO_P0_ALTSEL0 = 0x3873;
-
- *DANUBE_GPIO_P0_ALTSEL1 = 0x0001;
-
-
- //###################################################################################
- // Register values before patch
- // P1_ALTSEL0 = 0x83A7
- // P1_ALTSEL1 = 0x0400
- // P1_OU T = 0x7008
- // P1_DIR = 0xF3AE
- // P1_OD = 0xE3Fc
- printk("\nApplying Patch for CPU1 IRQ Issue\n");
- *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<12); // switch P1.12 (GPIO28) to GPIO functionality
- *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<12); // switch P1.12 (GPIO28) to GPIO functionality
- *DANUBE_GPIO_P1_OUT &= ~(1<<12); // set P1.12 (GPIO28) to 0
- *DANUBE_GPIO_P1_DIR |= (1<<12); // configure P1.12 (GPIO28) as output
- *DANUBE_GPIO_P1_OD |= (1<<12); // activate Push/Pull mode
- udelay(100); // wait a little bit (100us)
- *DANUBE_GPIO_P1_OD &= ~(1<<12); // switch back from Push/Pull to Open Drain
- // important: before! setting output to 1 (3,3V) the mode must be switched
- // back to Open Drain because the reset pin of the SC14488 is internally
- // pulled to 1,8V
- *DANUBE_GPIO_P1_OUT |= (1<<12); // set output P1.12 (GPIO28) to 1
- // Register values after patch, should be the same as before
- // P1_ALTSEL0 = 0x83A7
- // P1_ALTSEL1 = 0x0400
- // P1_OUT = 0x7008
- // P1_DIR = 0xF3AE
- // P1_OD = 0xE3Fc
- //###################################################################################
-
-
- *DANUBE_GPIO_P1_OUT = 0x7008;
- *DANUBE_GPIO_P1_DIR = 0xEBAE | (revision == PORTA2_HW_PASS2 ? 0x1000 : 0);
- *DANUBE_GPIO_P1_ALTSEL0 = 0x8BA7;
- *DANUBE_GPIO_P1_ALTSEL1 = 0x0400;
-
- iounmap(mem);
-}
-#endif
-static void __init bthomehubv2b_init(void) {
-#define bthomehubv2b_USB 13
-
- // read the board version
-#ifdef USE_BTHH_GPIO_INIT
- bthomehubv2b_board_prom_init();
-#endif
-
- // register extra GPPOs used by LEDs as GPO 0x200+
- ltq_register_gpio_stp();
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(bthomehubv2b_gpio_leds), bthomehubv2b_gpio_leds);
- bthhv2b_register_nor(&bthomehubv2b_flash_data);
- xway_register_nand(bthomehubv2b_nand_partitions, ARRAY_SIZE(bthomehubv2b_nand_partitions));
- ltq_register_pci(&ltq_pci_data);
- ltq_register_tapi();
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(bthomehubv2b_gpio_keys), bthomehubv2b_gpio_keys);
-// ltq_register_ath9k();
- xway_register_dwc(bthomehubv2b_USB);
- bthomehubv2b_register_ethernet();
-
-}
-
-MIPS_MACHINE(LANTIQ_MACH_BTHOMEHUBV2BOPENRG,
- "BTHOMEHUBV2BOPENRG",
- "BTHOMEHUBV2B - BT Homehub V2.0 Type B with OpenRG image retained",
- bthomehubv2b_init);
-
-MIPS_MACHINE(LANTIQ_MACH_BTHOMEHUBV2B,
- "BTHOMEHUBV2B",
- "BTHOMEHUBV2B - BT Homehub V2.0 Type B",
- bthomehubv2b_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_ar9.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_ar9.c
deleted file mode 100644
index 5bd6341809..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_ar9.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/phy.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/flash.h>
-
-#include <lantiq_soc.h>
-#include <irq.h>
-
-#include "../machtypes.h"
-#include "devices.h"
-#include "dev-ifxhcd.h"
-#include "dev-gpio-leds.h"
-#include "dev-gpio-buttons.h"
-
-static struct mtd_partition fritz7320_partitions[] = {
- {
- .name = "urlader",
- .offset = 0x0,
- .size = 0x20000,
- },
- {
- .name = "linux",
- .offset = 0x20000,
- .size = 0xf60000,
- },
- {
- .name = "tffs (1)",
- .offset = 0xf80000,
- .size = 0x40000,
- },
- {
- .name = "tffs (2)",
- .offset = 0xfc0000,
- .size = 0x40000,
- },
-};
-
-static struct physmap_flash_data fritz7320_flash_data = {
- .nr_parts = ARRAY_SIZE(fritz7320_partitions),
- .parts = fritz7320_partitions,
-};
-
-static struct gpio_led
-fritz7320_gpio_leds[] __initdata = {
- { .name = "soc:green:power", .gpio = 44, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:internet", .gpio = 47, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:dect", .gpio = 38, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:wlan", .gpio = 37, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:dual1", .gpio = 35, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:dual2", .gpio = 45, .active_low = 1, .default_trigger = "default-on" },
-};
-
-static struct gpio_keys_button
-fritz7320_gpio_keys[] __initdata = {
- {
- .desc = "wifi",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 1,
- .active_low = 1,
- },
- {
- .desc = "dect",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 2,
- .active_low = 1,
- },
-};
-
-static struct ltq_pci_data ltq_pci_data = {
- .clock = PCI_CLOCK_INT,
- .gpio = PCI_GNT1 | PCI_REQ1,
- .irq = {
- [14] = INT_NUM_IM0_IRL0 + 22,
- },
-};
-
-static struct ltq_eth_data ltq_eth_data = {
- .mii_mode = PHY_INTERFACE_MODE_RMII,
-};
-
-static int usb_pins[2] = { 50, 51 };
-
-static void __init
-fritz7320_init(void)
-{
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(fritz7320_gpio_keys), fritz7320_gpio_keys);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(fritz7320_gpio_leds), fritz7320_gpio_leds);
- ltq_register_pci(&ltq_pci_data);
- ltq_register_etop(&ltq_eth_data);
- ltq_register_nor(&fritz7320_flash_data);
- xway_register_hcd(usb_pins);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_FRITZ7320,
- "FRITZ7320",
- "FRITZ!BOX 7320",
- fritz7320_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_vr9.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_vr9.c
deleted file mode 100644
index 293c7b750a..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-fritz_vr9.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/phy.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/flash.h>
-
-#include <lantiq_soc.h>
-#include <irq.h>
-
-#include "../machtypes.h"
-#include "devices.h"
-#include "dev-ifxhcd.h"
-#include "dev-gpio-leds.h"
-#include "dev-gpio-buttons.h"
-
-static struct mtd_partition fritz3370_partitions[] = {
- {
- .name = "linux",
- .offset = 0x0,
- .size = 0x400000,
- },
- {
- .name = "filesystem",
- .offset = 0x400000,
- .size = 0x3000000,
- },
- {
- .name = "reserved-kernel",
- .offset = 0x3400000,
- .size = 0x400000,
- },
- {
- .name = "reserved",
- .offset = 0x3800000,
- .size = 0x3000000,
- },
- {
- .name = "config",
- .offset = 0x6800000,
- .size = 0x200000,
- },
- {
- .name = "nand-filesystem",
- .offset = 0x6a00000,
- .size = 0x1600000,
- },
-};
-
-static struct mtd_partition spi_flash_partitions[] = {
- {
- .name = "urlader",
- .offset = 0x0,
- .size = 0x20000,
- },
- {
- .name = "tffs",
- .offset = 0x20000,
- .size = 0x10000,
- },
- {
- .name = "tffs",
- .offset = 0x30000,
- .size = 0x10000,
- },
-};
-
-static struct gpio_led
-fritz3370_gpio_leds[] __initdata = {
- { .name = "soc:green:1", .gpio = 32, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:2", .gpio = 33, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:red:3", .gpio = 34, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:4", .gpio = 35, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:5", .gpio = 36, .active_low = 1, .default_trigger = "default-on" },
- { .name = "soc:green:6", .gpio = 47, .active_low = 1, .default_trigger = "default-on" },
-};
-
-static struct gpio_keys_button
-fritz3370_gpio_keys[] __initdata = {
- {
- .desc = "wifi",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 29,
- .active_low = 1,
- },
-};
-
-static struct ltq_eth_data ltq_eth_data = {
- .mii_mode = PHY_INTERFACE_MODE_RMII,
-};
-
-static int usb_pins[2] = { 5, 14 };
-
-#define SPI_GPIO_MRST 16
-#define SPI_GPIO_MTSR 17
-#define SPI_GPIO_CLK 18
-#define SPI_GPIO_CS0 10
-
-static struct spi_gpio_platform_data spi_gpio_data = {
- .sck = SPI_GPIO_CLK,
- .mosi = SPI_GPIO_MTSR,
- .miso = SPI_GPIO_MRST,
- .num_chipselect = 2,
-};
-
-static struct platform_device spi_gpio_device = {
- .name = "spi_gpio",
- .dev.platform_data = &spi_gpio_data,
-};
-
-static struct flash_platform_data spi_flash_data = {
- .name = "SPL",
- .parts = spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(spi_flash_partitions),
-};
-
-static struct spi_board_info spi_flash __initdata = {
- .modalias = "m25p80",
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .mode = SPI_MODE_3,
- .chip_select = 0,
- .controller_data = (void *) SPI_GPIO_CS0,
- .platform_data = &spi_flash_data
-};
-
-static void __init
-spi_gpio_init(void)
-{
- spi_register_board_info(&spi_flash, 1);
- platform_device_register(&spi_gpio_device);
-}
-
-static void __init
-fritz3370_init(void)
-{
- spi_gpio_init();
- platform_device_register_simple("pcie-xway", 0, NULL, 0);
- xway_register_nand(fritz3370_partitions, ARRAY_SIZE(fritz3370_partitions));
- xway_register_hcd(usb_pins);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(fritz3370_gpio_leds), fritz3370_gpio_leds);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(fritz3370_gpio_keys), fritz3370_gpio_keys);
- ltq_register_vrx200(&ltq_eth_data);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_FRITZ3370,
- "FRITZ3370",
- "FRITZ!BOX 3370",
- fritz3370_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.c
deleted file mode 100644
index af27825cbb..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 Andrej Vlašić
- * Copyright (C) 2011 Luka Perkov
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/io.h>
-#include <linux/if_ether.h>
-#include <linux/etherdevice.h>
-#include <linux/string.h>
-
-#include <irq.h>
-#include <lantiq_soc.h>
-#include <lantiq_platform.h>
-#include <dev-gpio-leds.h>
-#include <dev-gpio-buttons.h>
-
-#include "../machtypes.h"
-#include "dev-wifi-athxk.h"
-#include "devices.h"
-#include "dev-dwc_otg.h"
-
-#include "mach-gigasx76x.h"
-
-static u8 ltq_ethaddr[6] = { 0 };
-
-static int __init
-setup_ethaddr(char *str)
-{
- if (!mac_pton(str, ltq_ethaddr))
- memset(ltq_ethaddr, 0, 6);
- return 0;
-}
-__setup("ethaddr=", setup_ethaddr);
-
-
-enum {
- UNKNOWN = 0,
- SX761,
- SX762,
- SX763,
-};
-static u8 board __initdata = SX763;
-
-static int __init
-setup_board(char *str)
-{
- if (!strcmp(str, "sx761"))
- board = SX761;
- else if (!strcmp(str, "sx762"))
- board = SX762;
- else if (!strcmp(str, "sx763"))
- board = SX763;
- else
- board = UNKNOWN;
- return 0;
-}
-__setup("board=", setup_board);
-
-static struct mtd_partition gigasx76x_partitions[] =
-{
- {
- .name = "uboot",
- .offset = 0x0,
- .size = 0x10000,
- },
- {
- .name = "uboot_env",
- .offset = 0x10000,
- .size = 0x10000,
- },
- {
- .name = "linux",
- .offset = 0x20000,
- .size = 0x7e0000,
- },
-};
-
-static struct gpio_led
-gigasx76x_gpio_leds[] __initdata = {
- { .name = "soc:green:voip", .gpio = 216, },
- { .name = "soc:green:adsl", .gpio = 217, },
- { .name = "soc:green:usb", .gpio = 218, },
- { .name = "soc:green:wifi", .gpio = 219, },
- { .name = "soc:green:phone2", .gpio = 220, },
- { .name = "soc:green:phone1", .gpio = 221, },
- { .name = "soc:green:line", .gpio = 222, },
- { .name = "soc:green:online", .gpio = 223, },
-};
-
-static struct gpio_keys_button
-gigasx76x_gpio_keys[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 22,
- .active_low = 1,
- },
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 14,
- .active_low = 0,
- },
-};
-
-static struct physmap_flash_data gigasx76x_flash_data = {
- .nr_parts = ARRAY_SIZE(gigasx76x_partitions),
- .parts = gigasx76x_partitions,
-};
-
-static struct ltq_pci_data ltq_pci_data = {
- .clock = PCI_CLOCK_INT,
- .gpio = PCI_GNT1 | PCI_REQ1,
- .irq = { [14] = INT_NUM_IM0_IRL0 + 22, },
-};
-
-static struct ltq_eth_data ltq_eth_data = {
- .mii_mode = PHY_INTERFACE_MODE_MII,
-};
-
-static void __init
-gigasx76x_init(void)
-{
-#define GIGASX76X_USB 29
-
- ltq_register_gpio_stp();
- ltq_register_nor(&gigasx76x_flash_data);
- ltq_register_pci(&ltq_pci_data);
- ltq_register_tapi();
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(gigasx76x_gpio_leds), gigasx76x_gpio_leds);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(gigasx76x_gpio_keys), gigasx76x_gpio_keys);
- xway_register_dwc(GIGASX76X_USB);
-
- if (!is_valid_ether_addr(ltq_ethaddr))
- random_ether_addr(ltq_ethaddr);
-
- memcpy(&ltq_eth_data.mac.sa_data, ltq_ethaddr, 6);
- ltq_register_etop(&ltq_eth_data);
- if (board == SX762)
- ltq_register_ath5k(sx762_eeprom_data, ltq_ethaddr);
- else
- ltq_register_ath5k(sx763_eeprom_data, ltq_ethaddr);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_GIGASX76X,
- "GIGASX76X",
- "GIGASX76X - Gigaset SX761,SX762,SX763",
- gigasx76x_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.h
deleted file mode 100644
index 74e5ba28fe..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-gigasx76x.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 Andrej Vlašić
- * Copyright (C) 2011 Luka Perkov
- *
- */
-
-#ifndef _MACH_GIGASX76X_H__
-#define _MACH_GIGASX76X_H__
-
-#include <linux/ath5k_platform.h>
-
-static u16 sx763_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS] =
-{
-0x0013,0x168c,0x0200,0x0001,0x0000,0x5001,0x0000,0x2051,0x2051,0x1c0a,0x0100,
-0x0000,0x01c2,0x0002,0xc606,0x0001,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xf165,0x7fbe,0x0003,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x5aa5,0x0000,0x0000,0x0313,0x4943,
-0x2053,0x7104,0x1202,0x0400,0x0306,0x0001,0x0000,0x0500,0x410e,0x39b1,0x1eb5,
-0x4e2d,0x3056,0xffff,0xe902,0x0700,0x0106,0x0000,0x0100,0x1500,0x0752,0x4101,
-0x6874,0x7265,0x736f,0x4320,0x6d6f,0x756d,0x696e,0x6163,0x6974,0x6e6f,0x2c73,
-0x4920,0x636e,0x002e,0x5241,0x3035,0x3130,0x302d,0x3030,0x2d30,0x3030,0x3030,
-0x5700,0x7269,0x6c65,0x7365,0x2073,0x414c,0x204e,0x6552,0x6566,0x6572,0x636e,
-0x2065,0x6143,0x6472,0x3000,0x0030,0x00ff,0x2100,0x0602,0x2201,0x0205,0x8d80,
-0x005b,0x0522,0x4002,0x8954,0x2200,0x0205,0x1b00,0x00b7,0x0522,0x8002,0x12a8,
-0x2201,0x0205,0x3600,0x016e,0x0522,0x0002,0x2551,0x2202,0x0205,0x6c00,0x02dc,
-0x0522,0x8002,0x37f9,0x2203,0x0205,0xa200,0x044a,0x0222,0x0803,0x0822,0x0604,
-0x0300,0xbe7f,0x65f1,0x0222,0x0105,0x00ff,0x0000,0x0000,0x0000,0x0000,0x0000,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0x0037,0x971f,0x5003,0x9a66,0x0001,0x81c4,0x016a,
-0x02ff,0x84ff,0x15a3,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x2d2c,0x0000,0x0000,0x0000,0x0000,0xe028,0xa492,0x1c00,
-0x000e,0xb8ca,0x0013,0x0000,0x0000,0x6b4b,0xc059,0x1571,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x2370,0x00a5,0x9618,0x419a,0x68a2,0xda35,0x001c,0x0007,0xb0ff,0x01b5,0x0000,
-0x0000,0xff70,0x19ff,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x3170,0x00a5,0x9618,0x419a,0x68a2,0xda35,
-0x001c,0x000e,0xb0ff,0x21b5,0x0000,0x2fd8,0xff70,0x1226,0x19ff,0x07be,0x6201,
-0x032e,0x0587,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x1112,
-0x1441,0x4231,0x3234,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x4d31,0x7f54,0x3c93,0x1205,0x1931,
-0x492d,0x7f50,0x3c93,0x0e01,0x192d,0x0070,0x0000,0x8140,0x724b,0x2ba9,0x3a09,
-0x99d9,0x1949,0x0070,0x0000,0x80e0,0x624a,0x2af8,0x35c7,0x9d47,0x1938,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x7082,0x0820,0xb882,0x0820,0x7092,0x28a0,0x8992,
-0x28a0,0xa292,0x28a0,0x70a2,0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000,
-0x70a2,0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000,0x8989,0x0000,0x0000,
-0x0000,0x2424,0x0000,0x0000,0x0000,0x7075,0xa2ac,0xb800,0x0000,0x2464,0x2424,
-0x2400,0x0000,0x7075,0xa2ac,0x0000,0x0000,0x2464,0x2424,0x0000,0x0000,0x7075,
-0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000,0x7075,0xa7ac,0x0000,0x0000,
-0x2464,0x6424,0x0000,0x0000,0x8989,0x0000,0x0000,0x0000,0x2424,0x0000,0x0000,
-0x0000,0x0000,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff};
-
-static u16 sx762_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS] =
-{
-0x001a,0x168c,0x0200,0x0001,0x0000,0x5001,0x0000,0x2051,0x2051,0x1c0a,0x0100,
-0x0000,0x01c2,0x0002,0xc606,0x0001,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xf165,0x7fbe,0x0003,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x5aa5,0x0000,0x0000,0x0313,0x4943,
-0x2053,0x7104,0x1202,0x0400,0x0306,0x0001,0x0000,0x0500,0x410e,0x39b1,0x1eb5,
-0x4e2d,0x3056,0xffff,0xe902,0x0700,0x0106,0x0000,0x0100,0x1500,0x0752,0x4101,
-0x6874,0x7265,0x736f,0x4320,0x6d6f,0x756d,0x696e,0x6163,0x6974,0x6e6f,0x2c73,
-0x4920,0x636e,0x002e,0x5241,0x3035,0x3130,0x302d,0x3030,0x2d30,0x3030,0x3030,
-0x5700,0x7269,0x6c65,0x7365,0x2073,0x414c,0x204e,0x6552,0x6566,0x6572,0x636e,
-0x2065,0x6143,0x6472,0x3000,0x0030,0x00ff,0x2100,0x0602,0x2201,0x0205,0x8d80,
-0x005b,0x0522,0x4002,0x8954,0x2200,0x0205,0x1b00,0x00b7,0x0522,0x8002,0x12a8,
-0x2201,0x0205,0x3600,0x016e,0x0522,0x0002,0x2551,0x2202,0x0205,0x6c00,0x02dc,
-0x0522,0x8002,0x37f9,0x2203,0x0205,0xa200,0x044a,0x0222,0x0803,0x0822,0x0604,
-0x0300,0xbe7f,0x65f1,0x0222,0x0105,0x00ff,0x0000,0x0000,0x0000,0x0000,0x0000,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0x0037,0x6aaa,0x5003,0x9a66,0x0001,0x81c4,0x016a,
-0x02ff,0x84ff,0x15a3,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x2d2c,0x0000,0x0000,0x0000,0x0000,0xe028,0xa492,0x1c00,
-0x000e,0xb8ca,0x0013,0x0000,0x0000,0x6b4b,0xc059,0x1571,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x2370,0x00a5,0x9618,0x419a,0x68a2,0xda35,0x001c,0x0007,0xb0ff,0x01b5,0x0000,
-0x0000,0xff70,0x19ff,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x3170,0x00a5,0x9618,0x419a,0x68a2,0xda35,
-0x001c,0x000e,0xb0ff,0x21b5,0x0000,0x2fd8,0xff70,0x1226,0x19ff,0x07fa,0x6201,
-0x032e,0x0587,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x1112,
-0x1441,0x4231,0x3234,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x4d31,0x7f54,0x3c93,0x1205,0x1931,
-0x492d,0x7f50,0x3c93,0x0e01,0x192d,0x0070,0x0000,0x8180,0x724d,0xab59,0x3a08,
-0xdd79,0x2559,0x0070,0x0000,0x81a0,0x6e4d,0x2b99,0x3a09,0x9989,0x2157,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-0x0000,0x0000,0x0000,0x0000,0x7092,0x4924,0xb892,0x4924,0x7092,0x289e,0x8992,
-0x289e,0xa292,0x289e,0x70a2,0xa7ac,0x0000,0x0000,0x2462,0x5e13,0x0000,0x0000,
-0x70a2,0xa7ac,0x0000,0x0000,0x1e5c,0x5713,0x0000,0x0000,0x8989,0x0000,0x0000,
-0x0000,0x2424,0x0000,0x0000,0x0000,0x7075,0xa2ac,0xb800,0x0000,0x2868,0x2828,
-0x2800,0x0000,0x7075,0xa2ac,0x0000,0x0000,0x2868,0x2828,0x0000,0x0000,0x7075,
-0xac00,0x0000,0x0000,0x2161,0x2100,0x0000,0x0000,0x7075,0xac00,0x0000,0x0000,
-0x1b5b,0x1b00,0x0000,0x0000,0x8989,0x0000,0x0000,0x0000,0x2121,0x0000,0x0000,
-0x0000,0x0000,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,
-0xffff,0xffff};
-
-#endif
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-h201l.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-h201l.c
deleted file mode 100644
index 86101f5888..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-h201l.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2012 Luka Perkov <openwrt@lukaperkov.net>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/if_ether.h>
-#include <linux/etherdevice.h>
-#include <linux/string.h>
-
-#include <lantiq_soc.h>
-#include <lantiq_platform.h>
-#include <dev-gpio-leds.h>
-#include <dev-gpio-buttons.h>
-
-#include "../machtypes.h"
-#include "devices.h"
-#include "dev-dwc_otg.h"
-
-static u8 ltq_ethaddr[6] = { 0 };
-
-static int __init
-setup_ethaddr(char *str)
-{
- if (!mac_pton(str, ltq_ethaddr))
- memset(ltq_ethaddr, 0, 6);
- return 0;
-}
-__setup("ethaddr=", setup_ethaddr);
-
-static struct mtd_partition h201l_partitions[] __initdata =
-{
- {
- .name = "uboot",
- .offset = 0x0,
- .size = 0x20000,
- },
- {
- .name = "uboot_env",
- .offset = 0x20000,
- .size = 0x10000,
- },
- {
- .name = "linux",
- .offset = 0x30000,
- .size = 0x7d0000,
- },
-};
-
-static struct physmap_flash_data h201l_flash_data __initdata = {
- .nr_parts = ARRAY_SIZE(h201l_partitions),
- .parts = h201l_partitions,
-};
-
-static struct gpio_led
-h201l_leds_gpio[] __initdata = {
-};
-
-static struct gpio_keys_button
-h201l_gpio_keys[] __initdata = {
-};
-
-static struct ltq_eth_data ltq_eth_data = {
- .mii_mode = PHY_INTERFACE_MODE_RMII,
-};
-
-static void __init
-h201l_init(void)
-{
- ltq_register_gpio_stp();
- ltq_register_nor(&h201l_flash_data);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(h201l_leds_gpio), h201l_leds_gpio);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(h201l_gpio_keys), h201l_gpio_keys);
-
- if (!is_valid_ether_addr(ltq_ethaddr))
- random_ether_addr(ltq_ethaddr);
-
- memcpy(&ltq_eth_data.mac.sa_data, ltq_ethaddr, 6);
- ltq_register_etop(&ltq_eth_data);
-
- xway_register_dwc(-1);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_H201L,
- "H201L",
- "ZTE ZXV10 H201L",
- h201l_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-netgear.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-netgear.c
deleted file mode 100644
index 29b0728102..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-netgear.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- * Copyright (C) 2012 Pieter Voorthuijsen <p.voorthuijsen@gmail.com>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/phy.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/ath9k_platform.h>
-#include <linux/if_ether.h>
-#include <linux/etherdevice.h>
-#include <linux/kobject.h>
-#include <linux/sysfs.h>
-
-#include <lantiq_soc.h>
-#include <irq.h>
-#include <dev-gpio-leds.h>
-#include <dev-gpio-buttons.h>
-#include "dev-wifi-athxk.h"
-
-#include "../machtypes.h"
-#include "devices.h"
-#include "dev-dwc_otg.h"
-#include "pci-ath-fixup.h"
-#include <mtd/mtd-abi.h>
-#include <asm-generic/sizes.h>
-
-static struct mtd_partition dgn3500_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x10000,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "environment",
- .offset = 0x10000,
- .size = 0x10000,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "calibration",
- .offset = 0x20000,
- .size = 0x10000,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "linux",
- .offset = 0x50000,
- .size = 0xfa0000,
- },
-};
-
-static struct ltq_pci_data ltq_pci_data = {
- .clock = PCI_CLOCK_INT,
- .gpio = PCI_GNT1 | PCI_REQ1,
- .irq = {
- [14] = INT_NUM_IM0_IRL0 + 22,
- },
-};
-
-static struct ltq_eth_data ltq_eth_data = {
- .mii_mode = PHY_INTERFACE_MODE_MII,
-};
-
-static struct gpio_led
-dgn3500_gpio_leds[] __initdata = {
- { .name = "soc:green:power", .gpio = 34, .active_low = 1, },
- { .name = "soc:red:power", .gpio = 39, .active_low = 1, },
- { .name = "soc:orange:wlan", .gpio = 51, .active_low = 1, },
- { .name = "soc:green:wps", .gpio = 52, .active_low = 1, },
- { .name = "soc:green:usb", .gpio = 22, .active_low = 1, },
- { .name = "soc:green:dsl", .gpio = 4, .active_low = 1, },
- { .name = "soc:green:internet", .gpio = 2, .active_low = 1, },
-};
-
-static struct gpio_keys_button
-dgn3500_gpio_keys[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 54,
- .active_low = 1,
- },
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 36,
- .active_low = 1,
- },
-};
-
-#define SPI_GPIO_MRST 16
-#define SPI_GPIO_MTSR 17
-#define SPI_GPIO_CLK 18
-#define SPI_GPIO_CS0 10
-
-static struct spi_gpio_platform_data spi_gpio_data = {
- .sck = SPI_GPIO_CLK,
- .mosi = SPI_GPIO_MTSR,
- .miso = SPI_GPIO_MRST,
- .num_chipselect = 2,
-};
-
-static struct platform_device spi_gpio_device = {
- .name = "spi_gpio",
- .dev.platform_data = &spi_gpio_data,
-};
-
-static struct flash_platform_data spi_flash_data = {
- .name = "sflash",
- .parts = dgn3500_partitions,
- .nr_parts = ARRAY_SIZE(dgn3500_partitions),
-};
-
-static struct spi_board_info spi_flash __initdata = {
- .modalias = "m25p80",
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .mode = SPI_MODE_3,
- .chip_select = 0,
- .controller_data = (void *) SPI_GPIO_CS0,
- .platform_data = &spi_flash_data
-};
-
-static u8 ltq_ethaddr[6] = { 0 };
-
-static int __init setup_ethaddr(char *str)
-{
- if (!mac_pton(str, ltq_ethaddr))
- memset(ltq_ethaddr, 0, 6);
- return 0;
-}
-__setup("ethaddr=", setup_ethaddr);
-
-static u16 dgn3500_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS] = {0};
-
-static ssize_t ath_eeprom_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr, char *buf,
- loff_t offset, size_t count)
-{
- if (unlikely(offset >= sizeof(dgn3500_eeprom_data)))
- return 0;
- if ((offset + count) > sizeof(dgn3500_eeprom_data))
- count = sizeof(dgn3500_eeprom_data) - offset;
- if (unlikely(!count))
- return count;
-
- memcpy(buf, (char *)(dgn3500_eeprom_data) + offset, count);
-
- return count;
-}
-
-extern struct ath9k_platform_data ath9k_pdata;
-
-static ssize_t ath_eeprom_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr, char *buf,
- loff_t offset, size_t count)
-{
- int i;
- char *eeprom_bytes = (char *)dgn3500_eeprom_data;
-
- if (unlikely(offset >= sizeof(dgn3500_eeprom_data)))
- return -EFBIG;
- if ((offset + count) > sizeof(dgn3500_eeprom_data))
- count = sizeof(dgn3500_eeprom_data) - offset;
- if (unlikely(!count))
- return count;
- if (count % 2)
- return 0;
-
- /* The PCI fixup routine requires an endian swap of the calibartion data
- * stored in flash */
- for (i = 0; i < count; i += 2) {
- eeprom_bytes[offset + i + 1] = buf[i];
- eeprom_bytes[offset + i] = buf[i+1];
- }
-
- /* The original data does not contain a checksum. Set the country and
- * calculate new checksum when all data is received */
- if ((count + offset) == sizeof(dgn3500_eeprom_data))
- memcpy(ath9k_pdata.eeprom_data, dgn3500_eeprom_data,
- sizeof(ath9k_pdata.eeprom_data));
-
- return count;
-}
-
-static struct bin_attribute dev_attr_ath_eeprom = {
- .attr = {
- .name = "ath_eeprom",
- .mode = S_IRUGO|S_IWUSR,
- },
- .read = ath_eeprom_read,
- .write = ath_eeprom_write,
-};
-
-static void __init dgn3500_init(void)
-{
- if (sysfs_create_bin_file(firmware_kobj, &dev_attr_ath_eeprom))
- printk(KERN_INFO "Failed to create ath eeprom sysfs entry\n");
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(dgn3500_gpio_leds),
- dgn3500_gpio_leds);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dgn3500_gpio_keys), dgn3500_gpio_keys);
- platform_device_register(&spi_gpio_device);
- ltq_register_pci(&ltq_pci_data);
- spi_register_board_info(&spi_flash, 1);
- if (!is_valid_ether_addr(ltq_ethaddr)) {
- printk(KERN_INFO "MAC invalid using random\n");
- random_ether_addr(ltq_ethaddr);
- }
- memcpy(&ltq_eth_data.mac.sa_data, ltq_ethaddr, 6);
- ltq_register_etop(&ltq_eth_data);
- ltq_register_ath9k(dgn3500_eeprom_data, ltq_ethaddr);
- ltq_pci_ath_fixup(14, dgn3500_eeprom_data);
- /* The usb power is always enabled, protected by a fuse */
- xway_register_dwc(-1);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_DGN3500B,
- "DGN3500B",
- "Netgear DGN3500B",
- dgn3500_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-p2601hnfx.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-p2601hnfx.c
deleted file mode 100644
index 247dfb572c..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-p2601hnfx.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio_buttons.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/etherdevice.h>
-#include <linux/mdio-gpio.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-
-#include <lantiq_soc.h>
-#include <lantiq_platform.h>
-#include <dev-gpio-leds.h>
-#include <dev-gpio-buttons.h>
-
-#include "../machtypes.h"
-#include "devices.h"
-#include "dev-dwc_otg.h"
-
-static struct mtd_partition p2601hnfx_partitions[] __initdata =
-{
- {
- .name = "uboot",
- .offset = 0x0,
- .size = 0x20000,
- },
- {
- .name = "uboot_env",
- .offset = 0x20000,
- .size = 0x20000,
- },
- {
- .name = "linux",
- .offset = 0x40000,
- .size = 0xfc0000,
- },
-};
-
-static struct physmap_flash_data p2601hnfx_flash_data __initdata = {
- .nr_parts = ARRAY_SIZE(p2601hnfx_partitions),
- .parts = p2601hnfx_partitions,
-};
-
-static struct gpio_led
-p2601hnfx_leds_gpio[] __initdata = {
- { .name = "soc:yellow:phone", .gpio = 216, .active_low = 1 },
- { .name = "soc:green:phone", .gpio = 217, .active_low = 1 },
- { .name = "soc:yellow:wifi", .gpio = 218, .active_low = 1 },
- { .name = "soc:green:power", .gpio = 219, .active_low = 1 },
- { .name = "soc:red:internet", .gpio = 220, .active_low = 1 },
- { .name = "soc:green:internet", .gpio = 221, .active_low = 1 },
- { .name = "soc:green:dsl", .gpio = 222, .active_low = 1 },
- { .name = "soc:green:wifi", .gpio = 223, .active_low = 1 },
-};
-
-static struct gpio_keys_button
-p2601hnfx_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 53,
- .active_low = 1,
- },
- {
- .desc = "wifi",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 54,
- .active_low = 1,
- },
-};
-
-static struct ltq_eth_data ltq_eth_data = {
- .mii_mode = PHY_INTERFACE_MODE_RMII,
-};
-
-static void __init
-p2601hnfx_init(void)
-{
-#define P2601HNFX_USB 9
-
- ltq_register_gpio_stp();
- ltq_register_nor(&p2601hnfx_flash_data);
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(p2601hnfx_leds_gpio), p2601hnfx_leds_gpio);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(p2601hnfx_gpio_keys), p2601hnfx_gpio_keys);
- ltq_register_etop(&ltq_eth_data);
- xway_register_dwc(P2601HNFX_USB);
-
- // enable the ethernet ports on the SoC
-// ltq_w32((ltq_r32(LTQ_GPORT_P0_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P0_CTL);
-// ltq_w32((ltq_r32(LTQ_GPORT_P1_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P1_CTL);
-// ltq_w32((ltq_r32(LTQ_GPORT_P2_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P2_CTL);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_P2601HNFX,
- "P2601HNFX",
- "ZyXEL P-2601HN-Fx",
- p2601hnfx_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-wbmr.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-wbmr.c
deleted file mode 100644
index a57e092123..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/mach-wbmr.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio_buttons.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-
-#include <lantiq_soc.h>
-#include <irq.h>
-#include <dev-gpio-leds.h>
-#include <dev-gpio-buttons.h>
-
-#include "../machtypes.h"
-#include "devices.h"
-#include "dev-dwc_otg.h"
-
-static struct mtd_partition wbmr_partitions[] =
-{
- {
- .name = "uboot",
- .offset = 0x0,
- .size = 0x40000,
- },
- {
- .name = "uboot-env",
- .offset = 0x40000,
- .size = 0x20000,
- },
- {
- .name = "linux",
- .offset = 0x60000,
- .size = 0x1f20000,
- },
- {
- .name = "calibration",
- .offset = 0x1fe0000,
- .size = 0x20000,
- },
-};
-
-static struct physmap_flash_data wbmr_flash_data = {
- .nr_parts = ARRAY_SIZE(wbmr_partitions),
- .parts = wbmr_partitions,
-};
-
-static struct gpio_led
-wbmr_gpio_leds[] __initdata = {
- { .name = "soc:blue:movie", .gpio = 20, .active_low = 1, },
- { .name = "soc:red:internet", .gpio = 18, .active_low = 1, },
- { .name = "soc:green:internet", .gpio = 17, .active_low = 1, },
- { .name = "soc:green:adsl", .gpio = 16, .active_low = 1, },
- { .name = "soc:green:wlan", .gpio = 15, .active_low = 1, },
- { .name = "soc:red:security", .gpio = 14, .active_low = 1, },
- { .name = "soc:green:power", .gpio = 1, .active_low = 1, },
- { .name = "soc:red:power", .gpio = 5, .active_low = 1, },
- { .name = "soc:green:usb", .gpio = 28, .active_low = 1, },
-};
-
-static struct gpio_keys_button
-wbmr_gpio_keys[] __initdata = {
- {
- .desc = "aoss",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 0,
- .active_low = 1,
- },
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 37,
- .active_low = 1,
- },
-};
-
-static struct ltq_pci_data ltq_pci_data = {
- .clock = PCI_CLOCK_INT,
- .gpio = PCI_GNT1 | PCI_REQ1,
- .irq = {
- [14] = INT_NUM_IM0_IRL0 + 22,
- },
-};
-
-static struct ltq_eth_data ltq_eth_data = {
- .mii_mode = PHY_INTERFACE_MODE_RGMII,
-};
-
-static void __init
-wbmr_init(void)
-{
-#define WMBR_BRN_MAC 0x1fd0024
-
- ltq_add_device_gpio_leds(-1, ARRAY_SIZE(wbmr_gpio_leds), wbmr_gpio_leds);
- ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(wbmr_gpio_keys), wbmr_gpio_keys);
- ltq_register_nor(&wbmr_flash_data);
- ltq_register_pci(&ltq_pci_data);
- memcpy_fromio(&ltq_eth_data.mac.sa_data,
- (void *)KSEG1ADDR(LTQ_FLASH_START + WMBR_BRN_MAC), 6);
- ltq_register_etop(&ltq_eth_data);
- xway_register_dwc(36);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_WBMR,
- "WBMR",
- "WBMR",
- wbmr_init);
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/nand.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/nand.c
deleted file mode 100644
index 9ab91d8819..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/nand.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <lantiq_soc.h>
-#include <lantiq_irq.h>
-#include <lantiq_platform.h>
-
-#include "devices.h"
-
-/* nand registers */
-#define LTQ_EBU_NAND_WAIT 0xB4
-#define LTQ_EBU_NAND_ECC0 0xB8
-#define LTQ_EBU_NAND_ECC_AC 0xBC
-#define LTQ_EBU_NAND_CON 0xB0
-#define LTQ_EBU_ADDSEL1 0x24
-
-/* gpio definitions */
-#define PIN_ALE 13
-#define PIN_CLE 24
-#define PIN_CS1 23
-#define PIN_RDY 48 /* NFLASH_READY */
-#define PIN_RD 49 /* NFLASH_READ_N */
-
-#define NAND_CMD_ALE (1 << 2)
-#define NAND_CMD_CLE (1 << 3)
-#define NAND_CMD_CS (1 << 4)
-#define NAND_WRITE_CMD_RESET 0xff
-#define NAND_WRITE_CMD (NAND_CMD_CS | NAND_CMD_CLE)
-#define NAND_WRITE_ADDR (NAND_CMD_CS | NAND_CMD_ALE)
-#define NAND_WRITE_DATA (NAND_CMD_CS)
-#define NAND_READ_DATA (NAND_CMD_CS)
-#define NAND_WAIT_WR_C (1 << 3)
-#define NAND_WAIT_RD (0x1)
-
-#define ADDSEL1_MASK(x) (x << 4)
-#define ADDSEL1_REGEN 1
-#define BUSCON1_SETUP (1 << 22)
-#define BUSCON1_BCGEN_RES (0x3 << 12)
-#define BUSCON1_WAITWRC2 (2 << 8)
-#define BUSCON1_WAITRDC2 (2 << 6)
-#define BUSCON1_HOLDC1 (1 << 4)
-#define BUSCON1_RECOVC1 (1 << 2)
-#define BUSCON1_CMULT4 1
-#define NAND_CON_NANDM 1
-#define NAND_CON_CSMUX (1 << 1)
-#define NAND_CON_CS_P (1 << 4)
-#define NAND_CON_SE_P (1 << 5)
-#define NAND_CON_WP_P (1 << 6)
-#define NAND_CON_PRE_P (1 << 7)
-#define NAND_CON_IN_CS0 0
-#define NAND_CON_OUT_CS0 0
-#define NAND_CON_IN_CS1 (1 << 8)
-#define NAND_CON_OUT_CS1 (1 << 10)
-#define NAND_CON_CE (1 << 20)
-
-#define NAND_BASE_ADDRESS (KSEG1 | 0x14000000)
-
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
-static void xway_select_chip(struct mtd_info *mtd, int chip)
-{
- switch (chip) {
- case -1:
- ltq_ebu_w32_mask(NAND_CON_CE, 0, LTQ_EBU_NAND_CON);
- ltq_ebu_w32_mask(NAND_CON_NANDM, 0, LTQ_EBU_NAND_CON);
- break;
- case 0:
- ltq_ebu_w32_mask(0, NAND_CON_NANDM, LTQ_EBU_NAND_CON);
- ltq_ebu_w32_mask(0, NAND_CON_CE, LTQ_EBU_NAND_CON);
- /* reset the nand chip */
- while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- ;
- ltq_w32(NAND_WRITE_CMD_RESET,
- ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
- break;
- default:
- BUG();
- }
-}
-
-static void xway_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- if (ctrl & NAND_CLE)
- this->IO_ADDR_W = (void __iomem *)
- (NAND_BASE_ADDRESS | NAND_WRITE_CMD);
- else if (ctrl & NAND_ALE)
- this->IO_ADDR_W = (void __iomem *)
- (NAND_BASE_ADDRESS | NAND_WRITE_ADDR);
- }
-
- if (data != NAND_CMD_NONE) {
- *(volatile u8*) ((u32) this->IO_ADDR_W) = data;
- while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- ;
- }
-}
-
-static int xway_dev_ready(struct mtd_info *mtd)
-{
- return ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_RD;
-}
-
-void nand_write(unsigned int addr, unsigned int val)
-{
- ltq_w32(val, ((u32 *) (NAND_BASE_ADDRESS | addr)));
- while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- ;
-}
-
-unsigned char xway_read_byte(struct mtd_info *mtd)
-{
- return ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
-}
-
-static void xway_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-{
- int i;
-
- for (i = 0; i < len; i++)
- {
- unsigned char res8 = ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
- buf[i] = res8;
- }
-}
-
-static void xway_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
- int i;
-
- for (i = 0; i < len; i++)
- {
- ltq_w8(buf[i], ((u32*)(NAND_BASE_ADDRESS | (NAND_WRITE_DATA))));
- while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0);
- }
-}
-
-int xway_probe(struct platform_device *pdev)
-{
- /* might need this later ?
- ltq_gpio_request(PIN_CS1, 2, 1, "NAND_CS1");
- */
- ltq_gpio_request(&pdev->dev, PIN_CLE, 2, 1, "NAND_CLE");
- ltq_gpio_request(&pdev->dev, PIN_ALE, 2, 1, "NAND_ALE");
- if (ltq_is_ar9() || ltq_is_vr9()) {
- ltq_gpio_request(&pdev->dev, PIN_RDY, 2, 0, "NAND_BSY");
- ltq_gpio_request(&pdev->dev, PIN_RD, 2, 1, "NAND_RD");
- }
-
- ltq_ebu_w32((NAND_BASE_ADDRESS & 0x1fffff00)
- | ADDSEL1_MASK(3) | ADDSEL1_REGEN, LTQ_EBU_ADDSEL1);
-
- ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
- | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
- | BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
-
- ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
- | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
- | NAND_CON_IN_CS0 | NAND_CON_OUT_CS0, LTQ_EBU_NAND_CON);
-
- ltq_w32(NAND_WRITE_CMD_RESET,
- ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
- while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
- ;
-
- return 0;
-}
-
-static struct platform_nand_data falcon_flash_nand_data = {
- .chip = {
- .nr_chips = 1,
- .chip_delay = 30,
- .part_probe_types = part_probes,
- },
- .ctrl = {
- .probe = xway_probe,
- .cmd_ctrl = xway_cmd_ctrl,
- .dev_ready = xway_dev_ready,
- .select_chip = xway_select_chip,
- .read_byte = xway_read_byte,
- .read_buf = xway_read_buf,
- .write_buf = xway_write_buf,
- }
-};
-
-static struct resource ltq_nand_res =
- MEM_RES("nand", 0x14000000, 0x7ffffff);
-
-static struct platform_device ltq_flash_nand = {
- .name = "gen_nand",
- .id = -1,
- .num_resources = 1,
- .resource = &ltq_nand_res,
- .dev = {
- .platform_data = &falcon_flash_nand_data,
- },
-};
-
-void __init xway_register_nand(struct mtd_partition *parts, int count)
-{
- falcon_flash_nand_data.chip.partitions = parts;
- falcon_flash_nand_data.chip.nr_partitions = count;
- platform_device_register(&ltq_flash_nand);
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.c
deleted file mode 100644
index c87ffb2091..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Atheros AP94 reference board PCI initialization
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <lantiq_soc.h>
-
-#define LTQ_PCI_MEM_BASE 0x18000000
-
-struct ath_fixup {
- u16 *cal_data;
- unsigned slot;
-};
-
-static int ath_num_fixups;
-static struct ath_fixup ath_fixups[2];
-
-static void ath_pci_fixup(struct pci_dev *dev)
-{
- void __iomem *mem;
- u16 *cal_data = NULL;
- u16 cmd;
- u32 bar0;
- u32 val;
- unsigned i;
-
- for (i = 0; i < ath_num_fixups; i++) {
- if (ath_fixups[i].cal_data == NULL)
- continue;
-
- if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
- continue;
-
- cal_data = ath_fixups[i].cal_data;
- break;
- }
-
- if (cal_data == NULL)
- return;
-
- if (*cal_data != 0xa55a) {
- pr_err("pci %s: invalid calibration data\n", pci_name(dev));
- return;
- }
-
- pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-
- mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000);
- if (!mem) {
- pr_err("pci %s: ioremap error\n", pci_name(dev));
- return;
- }
-
- pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE);
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- /* set pointer to first reg address */
- cal_data += 3;
- while (*cal_data != 0xffff) {
- u32 reg;
- reg = *cal_data++;
- val = *cal_data++;
- val |= (*cal_data++) << 16;
-
- ltq_w32(swab32(val), mem + reg);
- udelay(100);
- }
-
- pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
- dev->vendor = val & 0xffff;
- dev->device = (val >> 16) & 0xffff;
-
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
- dev->revision = val & 0xff;
- dev->class = val >> 8; /* upper 3 bytes */
-
- pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n",
- pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-
- iounmap(mem);
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
-
-void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
-{
- if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
- return;
-
- ath_fixups[ath_num_fixups].slot = slot;
- ath_fixups[ath_num_fixups].cal_data = cal_data;
- ath_num_fixups++;
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.h b/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.h
deleted file mode 100644
index 095d2619ce..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/pci-ath-fixup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _PCI_ATH_FIXUP
-#define _PCI_ATH_FIXUP
-
-void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
-
-#endif /* _PCI_ATH_FIXUP */
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/prom.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/prom.c
deleted file mode 100644
index f776d5a914..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/prom.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/export.h>
-#include <linux/clk.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-
-#include <lantiq_soc.h>
-
-#include "../prom.h"
-#include "devices.h"
-
-#define SOC_DANUBE "Danube"
-#define SOC_TWINPASS "Twinpass"
-#define SOC_AMAZON_SE "Amazon_SE"
-#define SOC_AR9 "AR9"
-#define SOC_GR9 "GR9"
-#define SOC_VR9 "VR9"
-
-#define PART_SHIFT 12
-#define PART_MASK 0x0FFFFFFF
-#define REV_SHIFT 28
-#define REV_MASK 0xF0000000
-
-
-void __init ltq_soc_detect(struct ltq_soc_info *i)
-{
- i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
- i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
- sprintf(i->rev_type, "1.%d", i->rev);
- switch (i->partnum) {
- case SOC_ID_DANUBE1:
- case SOC_ID_DANUBE2:
- i->name = SOC_DANUBE;
- i->type = SOC_TYPE_DANUBE;
- break;
-
- case SOC_ID_TWINPASS:
- i->name = SOC_TWINPASS;
- i->type = SOC_TYPE_DANUBE;
- break;
-
- case SOC_ID_ARX188:
- case SOC_ID_ARX168_1:
- case SOC_ID_ARX168_2:
- case SOC_ID_ARX182:
- i->name = SOC_AR9;
- i->type = SOC_TYPE_AR9;
- break;
-
- case SOC_ID_GRX188:
- case SOC_ID_GRX168:
- i->name = SOC_GR9;
- i->type = SOC_TYPE_AR9;
- break;
-
- case SOC_ID_AMAZON_SE_1:
- case SOC_ID_AMAZON_SE_2:
- i->name = SOC_AMAZON_SE;
- i->type = SOC_TYPE_AMAZON_SE;
-#ifdef CONFIG_PCI
- panic("ase is only supported for non pci kernels");
-#endif
- break;
-
- case SOC_ID_VRX282:
- case SOC_ID_VRX268:
- case SOC_ID_VRX288:
- i->name = SOC_VR9;
- i->type = SOC_TYPE_VR9_1;
- break;
-
- case SOC_ID_GRX268:
- case SOC_ID_GRX288:
- i->name = SOC_GR9;
- i->type = SOC_TYPE_VR9_1;
- break;
-
- case SOC_ID_VRX268_2:
- case SOC_ID_VRX288_2:
- i->name = SOC_VR9;
- i->type = SOC_TYPE_VR9_2;
- break;
-
- case SOC_ID_GRX282_2:
- case SOC_ID_GRX288_2:
- i->name = SOC_GR9;
- i->type = SOC_TYPE_VR9_2;
-
- default:
- unreachable();
- break;
- }
-}
-
-void __init ltq_soc_setup(void)
-{
- if (ltq_is_ase())
- ltq_register_ase_asc();
- else
- ltq_register_asc(1);
- ltq_register_gpio();
- ltq_register_wdt();
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/sysctrl.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/sysctrl.c
deleted file mode 100644
index de4ce8f1cb..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/sysctrl.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/ioport.h>
-#include <linux/export.h>
-#include <linux/clkdev.h>
-
-#include <lantiq_soc.h>
-
-#include "../clk.h"
-#include "../devices.h"
-
-/* clock control register */
-#define CGU_IFCCR 0x0018
-/* system clock register */
-#define CGU_SYS 0x0010
-/* pci control register */
-#define CGU_PCICR 0x0034
-/* ephy configuration register */
-#define CGU_EPHY 0x10
-/* power control register */
-#define PMU_PWDCR 0x1C
-/* power status register */
-#define PMU_PWDSR 0x20
-/* power control register */
-#define PMU_PWDCR1 0x24
-/* power status register */
-#define PMU_PWDSR1 0x28
-/* power control register */
-#define PWDCR(x) ((x) ? (PMU_PWDCR1) : (PMU_PWDCR))
-/* power status register */
-#define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR))
-
-/* PMU - power management unit */
-#define PMU_USB0_P BIT(0)
-#define PMU_PCI BIT(4)
-#define PMU_DMA BIT(5)
-#define PMU_USB0 BIT(6)
-#define PMU_EPHY BIT(7) /* ase */
-#define PMU_SPI BIT(8)
-#define PMU_DFE BIT(9)
-#define PMU_EBU BIT(10)
-#define PMU_STP BIT(11)
-#define PMU_GPT BIT(12)
-#define PMU_PPE BIT(13)
-#define PMU_AHBS BIT(13) /* vr9 */
-#define PMU_FPI BIT(14)
-#define PMU_AHBM BIT(15)
-#define PMU_PPE_QSB BIT(18)
-#define PMU_PPE_SLL01 BIT(19)
-#define PMU_PPE_TC BIT(21)
-#define PMU_PPE_EMA BIT(22)
-#define PMU_PPE_DPLUM BIT(23)
-#define PMU_PPE_DPLUS BIT(24)
-#define PMU_USB1_P BIT(26)
-#define PMU_USB1 BIT(27)
-#define PMU_SWITCH BIT(28)
-#define PMU_PPE_TOP BIT(29)
-#define PMU_GPHY BIT(30)
-#define PMU_PCIE_CLK BIT(31)
-
-#define PMU1_PCIE_PHY BIT(0)
-#define PMU1_PCIE_CTL BIT(1)
-#define PMU1_PCIE_PDI BIT(4)
-#define PMU1_PCIE_MSI BIT(5)
-
-#define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y))
-#define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x))
-
-static struct resource ltq_cgu_resource =
- MEM_RES("cgu", LTQ_CGU_BASE_ADDR, LTQ_CGU_SIZE);
-
-static struct resource ltq_pmu_resource =
- MEM_RES("pmu", LTQ_PMU_BASE_ADDR, LTQ_PMU_SIZE);
-
-static struct resource ltq_ebu_resource =
- MEM_RES("ebu", LTQ_EBU_BASE_ADDR, LTQ_EBU_SIZE);
-
-void __iomem *ltq_cgu_membase;
-void __iomem *ltq_ebu_membase;
-static void __iomem *ltq_pmu_membase;
-
-static int ltq_cgu_enable(struct clk *clk)
-{
- ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | clk->bits, CGU_IFCCR);
- return 0;
-}
-
-static void ltq_cgu_disable(struct clk *clk)
-{
- ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~clk->bits, CGU_IFCCR);
-}
-
-static int ltq_pmu_enable(struct clk *clk)
-{
- int err = 1000000;
-
- ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) & ~clk->bits,
- PWDCR(clk->module));
- do {} while (--err && (ltq_pmu_r32(PWDSR(clk->module)) & clk->bits));
-
- if (!err)
- panic("activating PMU module failed!\n");
-
- return 0;
-}
-
-static void ltq_pmu_disable(struct clk *clk)
-{
- ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) | clk->bits,
- PWDCR(clk->module));
-}
-
-static int ltq_pci_enable(struct clk *clk)
-{
- unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR);
- /* set clock bus speed */
- if (ltq_is_ar9()) {
- ifccr &= ~0x1f00000;
- if (clk->rate == CLOCK_33M)
- ifccr |= 0xe00000;
- else
- ifccr |= 0x700000; /* 62.5M */
- } else {
- ifccr &= ~0xf00000;
- if (clk->rate == CLOCK_33M)
- ifccr |= 0x800000;
- else
- ifccr |= 0x400000; /* 62.5M */
- }
- ltq_cgu_w32(ifccr, CGU_IFCCR);
- return 0;
-}
-
-static int ltq_pci_ext_enable(struct clk *clk)
-{
- /* enable external pci clock */
- ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~(1 << 16),
- CGU_IFCCR);
- ltq_cgu_w32((1 << 30), CGU_PCICR);
- return 0;
-}
-
-static void ltq_pci_ext_disable(struct clk *clk)
-{
- /* disable external pci clock (internal) */
- ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16),
- CGU_IFCCR);
- ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR);
-}
-
-/* manage the clock gates via PMU */
-static inline void clkdev_add_pmu(const char *dev, const char *con,
- unsigned int module, unsigned int bits)
-{
- struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
-
- clk->cl.dev_id = dev;
- clk->cl.con_id = con;
- clk->cl.clk = clk;
- clk->enable = ltq_pmu_enable;
- clk->disable = ltq_pmu_disable;
- clk->module = module;
- clk->bits = bits;
- clkdev_add(&clk->cl);
-}
-
-/* manage the clock generator */
-static inline void clkdev_add_cgu(const char *dev, const char *con,
- unsigned int bits)
-{
- struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
-
- clk->cl.dev_id = dev;
- clk->cl.con_id = con;
- clk->cl.clk = clk;
- clk->enable = ltq_cgu_enable;
- clk->disable = ltq_cgu_disable;
- clk->bits = bits;
- clkdev_add(&clk->cl);
-}
-
-/* pci needs its own enable function */
-static inline void clkdev_add_pci(void)
-{
- struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
- struct clk *clk_ext = kzalloc(sizeof(struct clk), GFP_KERNEL);
-
- /* main pci clock */
- clk->cl.dev_id = "ltq_pci";
- clk->cl.con_id = NULL;
- clk->cl.clk = clk;
- clk->rate = CLOCK_33M;
- clk->enable = ltq_pci_enable;
- clk->disable = ltq_pmu_disable;
- clk->module = 0;
- clk->bits = PMU_PCI;
- clkdev_add(&clk->cl);
-
- /* use internal/external bus clock */
- clk_ext->cl.dev_id = "ltq_pci";
- clk_ext->cl.con_id = "external";
- clk_ext->cl.clk = clk_ext;
- clk_ext->enable = ltq_pci_ext_enable;
- clk_ext->disable = ltq_pci_ext_disable;
- clkdev_add(&clk_ext->cl);
-
-}
-
-void __init ltq_soc_init(void)
-{
- ltq_pmu_membase = ltq_remap_resource(&ltq_pmu_resource);
- if (!ltq_pmu_membase)
- panic("Failed to remap pmu memory\n");
-
- ltq_cgu_membase = ltq_remap_resource(&ltq_cgu_resource);
- if (!ltq_cgu_membase)
- panic("Failed to remap cgu memory\n");
-
- ltq_ebu_membase = ltq_remap_resource(&ltq_ebu_resource);
- if (!ltq_ebu_membase)
- panic("Failed to remap ebu memory\n");
-
- /* make sure to unprotect the memory region where flash is located */
- ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
-
- /* add our clocks */
- clkdev_add_pmu("ltq_fpi", NULL, 0, PMU_FPI);
- clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
- clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
- clkdev_add_pmu("ltq_spi.0", NULL, 0, PMU_SPI);
- clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT);
- clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU);
- if (!ltq_is_vr9())
- clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
- if (!ltq_is_ase())
- clkdev_add_pci();
- if (ltq_is_ase()) {
- if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
- clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
- else
- clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
- clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY),
- clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
- clkdev_add_pmu("ltq_dsl", NULL, 0,
- PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- PMU_AHBS | PMU_DFE);
- } else if (ltq_is_vr9()) {
- clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
- ltq_vr9_fpi_hz());
- clkdev_add_pmu("ltq_pcie", "phy", 1, PMU1_PCIE_PHY);
- clkdev_add_pmu("ltq_pcie", "bus", 0, PMU_PCIE_CLK);
- clkdev_add_pmu("ltq_pcie", "msi", 1, PMU1_PCIE_MSI);
- clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI);
- clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL);
- clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
- clkdev_add_pmu("usb0", NULL, 0, PMU_USB0 | PMU_USB0_P);
- clkdev_add_pmu("usb1", NULL, 0, PMU_USB1 | PMU_USB1_P);
- clkdev_add_pmu("ltq_vrx200", NULL, 0,
- PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
- PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- PMU_PPE_QSB);
- clkdev_add_pmu("ltq_dsl", NULL, 0, PMU_DFE | PMU_AHBS);
- } else if (ltq_is_ar9()) {
- clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
- ltq_ar9_fpi_hz());
- clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
- clkdev_add_pmu("ltq_dsl", NULL, 0,
- PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- PMU_PPE_QSB | PMU_AHBS | PMU_DFE);
- } else {
- clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
- ltq_danube_io_region_clock());
- clkdev_add_pmu("ltq_dsl", NULL, 0,
- PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- PMU_PPE_QSB | PMU_AHBS | PMU_DFE);
- }
-}
diff --git a/target/linux/lantiq/files/arch/mips/lantiq/xway/timer.c b/target/linux/lantiq/files/arch/mips/lantiq/xway/timer.c
deleted file mode 100644
index 9794c87c73..0000000000
--- a/target/linux/lantiq/files/arch/mips/lantiq/xway/timer.c
+++ /dev/null
@@ -1,846 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/init.h>
-#include <linux/uaccess.h>
-#include <linux/unistd.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-
-#include <asm/irq.h>
-#include <asm/div64.h>
-#include "../clk.h"
-
-#include <lantiq_soc.h>
-#include <lantiq_irq.h>
-#include <lantiq_timer.h>
-
-#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6
-
-#ifdef TIMER1A
-#define FIRST_TIMER TIMER1A
-#else
-#define FIRST_TIMER 2
-#endif
-
-/*
- * GPTC divider is set or not.
- */
-#define GPTU_CLC_RMC_IS_SET 0
-
-/*
- * Timer Interrupt (IRQ)
- */
-/* Must be adjusted when ICU driver is available */
-#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22)
-
-/*
- * Bits Operation
- */
-#define GET_BITS(x, msb, lsb) \
- (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-#define SET_BITS(x, msb, lsb, value) \
- (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
- (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
-
-/*
- * GPTU Register Mapping
- */
-#define LQ_GPTU (KSEG1 + 0x1E100A00)
-#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000))
-#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008))
-#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4))
-#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8))
-#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC))
-
-/*
- * Clock Control Register
- */
-#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16)
-#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8)
-#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5))
-#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3))
-#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2))
-#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1))
-#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0))
-
-#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value))
-#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value))
-#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0)
-#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0)
-#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0)
-#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0)
-#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0)
-
-/*
- * ID Register
- */
-#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8)
-#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5)
-#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0)
-
-/*
- * Control Register of Timer/Counter nX
- * n is the index of block (1 based index)
- * X is either A or B
- */
-#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10))
-#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9))
-#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8))
-#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
-#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5))
-#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */
-#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3))
-#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2))
-#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1))
-#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0))
-
-#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10))
-#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0)
-#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0)
-#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value))
-#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0)
-#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0)
-#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0)
-#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0)
-#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0)
-
-#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0)
-#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0)
-#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0)
-
-#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-
-#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001)
-#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002)
-#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004)
-#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008)
-#define TIMER_FLAG_NONE_EDGE 0x0000
-#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030)
-#define TIMER_FLAG_REAL 0x0000
-#define TIMER_FLAG_INVERT 0x0040
-#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040)
-#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070)
-#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080)
-#define TIMER_FLAG_CALLBACK_IN_HB 0x0200
-#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300)
-#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000)
-
-struct timer_dev_timer {
- unsigned int f_irq_on;
- unsigned int irq;
- unsigned int flag;
- unsigned long arg1;
- unsigned long arg2;
-};
-
-struct timer_dev {
- struct mutex gptu_mutex;
- unsigned int number_of_timers;
- unsigned int occupation;
- unsigned int f_gptu_on;
- struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
-};
-
-unsigned long ltq_danube_fpi_bus_clock(int fpi);
-unsigned long ltq_vr9_fpi_bus_clock(int fpi);
-
-unsigned int ltq_get_fpi_bus_clock(int fpi) {
- if (ltq_is_ase())
- return CLOCK_133M;
- else if (ltq_is_vr9())
- return ltq_vr9_fpi_bus_clock(fpi);
-
- return ltq_danube_fpi_bus_clock(fpi);
-}
-
-
-static long gptu_ioctl(struct file *, unsigned int, unsigned long);
-static int gptu_open(struct inode *, struct file *);
-static int gptu_release(struct inode *, struct file *);
-
-static struct file_operations gptu_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = gptu_ioctl,
- .open = gptu_open,
- .release = gptu_release
-};
-
-static struct miscdevice gptu_miscdev = {
- .minor = MISC_DYNAMIC_MINOR,
- .name = "gptu",
- .fops = &gptu_fops,
-};
-
-static struct timer_dev timer_dev;
-
-static irqreturn_t timer_irq_handler(int irq, void *p)
-{
- unsigned int timer;
- unsigned int flag;
- struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
-
- timer = irq - TIMER_INTERRUPT;
- if (timer < timer_dev.number_of_timers
- && dev_timer == &timer_dev.timer[timer]) {
- /* Clear interrupt. */
- ltq_w32(1 << timer, LQ_GPTU_IRNCR);
-
- /* Call user hanler or signal. */
- flag = dev_timer->flag;
- if (!(timer & 0x01)
- || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
- /* 16-bit timer or timer A of 32-bit timer */
- switch (TIMER_FLAG_MASK_HANDLE(flag)) {
- case TIMER_FLAG_CALLBACK_IN_IRQ:
- case TIMER_FLAG_CALLBACK_IN_HB:
- if (dev_timer->arg1)
- (*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
- break;
- case TIMER_FLAG_SIGNAL:
- send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
- break;
- }
- }
- }
- return IRQ_HANDLED;
-}
-
-static inline void lq_enable_gptu(void)
-{
- struct clk *clk = clk_get_sys("ltq_gptu", NULL);
- clk_enable(clk);
-
- //ltq_pmu_enable(PMU_GPT);
-
- /* Set divider as 1, disable write protection for SPEN, enable module. */
- *LQ_GPTU_CLC =
- GPTU_CLC_SMC_SET(0x00) |
- GPTU_CLC_RMC_SET(0x01) |
- GPTU_CLC_FSOE_SET(0) |
- GPTU_CLC_SBWE_SET(1) |
- GPTU_CLC_EDIS_SET(0) |
- GPTU_CLC_SPEN_SET(0) |
- GPTU_CLC_DISR_SET(0);
-}
-
-static inline void lq_disable_gptu(void)
-{
- struct clk *clk = clk_get_sys("ltq_gptu", NULL);
- ltq_w32(0x00, LQ_GPTU_IRNEN);
- ltq_w32(0xfff, LQ_GPTU_IRNCR);
-
- /* Set divider as 0, enable write protection for SPEN, disable module. */
- *LQ_GPTU_CLC =
- GPTU_CLC_SMC_SET(0x00) |
- GPTU_CLC_RMC_SET(0x00) |
- GPTU_CLC_FSOE_SET(0) |
- GPTU_CLC_SBWE_SET(0) |
- GPTU_CLC_EDIS_SET(0) |
- GPTU_CLC_SPEN_SET(0) |
- GPTU_CLC_DISR_SET(1);
-
- clk_enable(clk);
-}
-
-int lq_request_timer(unsigned int timer, unsigned int flag,
- unsigned long value, unsigned long arg1, unsigned long arg2)
-{
- int ret = 0;
- unsigned int con_reg, irnen_reg;
- int n, X;
-
- if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
- return -EINVAL;
-
- printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
- timer, flag, value);
-
- if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
- value &= 0xFFFF;
- else
- timer &= ~0x01;
-
- mutex_lock(&timer_dev.gptu_mutex);
-
- /*
- * Allocate timer.
- */
- if (timer < FIRST_TIMER) {
- unsigned int mask;
- unsigned int shift;
- /* This takes care of TIMER1B which is the only choice for Voice TAPI system */
- unsigned int offset = TIMER2A;
-
- /*
- * Pick up a free timer.
- */
- if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
- mask = 1 << offset;
- shift = 1;
- } else {
- mask = 3 << offset;
- shift = 2;
- }
- for (timer = offset;
- timer < offset + timer_dev.number_of_timers;
- timer += shift, mask <<= shift)
- if (!(timer_dev.occupation & mask)) {
- timer_dev.occupation |= mask;
- break;
- }
- if (timer >= offset + timer_dev.number_of_timers) {
- printk("failed![%d]\n", __LINE__);
- mutex_unlock(&timer_dev.gptu_mutex);
- return -EINVAL;
- } else
- ret = timer;
- } else {
- register unsigned int mask;
-
- /*
- * Check if the requested timer is free.
- */
- mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
- if ((timer_dev.occupation & mask)) {
- printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
- __LINE__, mask, timer_dev.occupation);
- mutex_unlock(&timer_dev.gptu_mutex);
- return -EBUSY;
- } else {
- timer_dev.occupation |= mask;
- ret = 0;
- }
- }
-
- /*
- * Prepare control register value.
- */
- switch (TIMER_FLAG_MASK_EDGE(flag)) {
- default:
- case TIMER_FLAG_NONE_EDGE:
- con_reg = GPTU_CON_EDGE_SET(0x00);
- break;
- case TIMER_FLAG_RISE_EDGE:
- con_reg = GPTU_CON_EDGE_SET(0x01);
- break;
- case TIMER_FLAG_FALL_EDGE:
- con_reg = GPTU_CON_EDGE_SET(0x02);
- break;
- case TIMER_FLAG_ANY_EDGE:
- con_reg = GPTU_CON_EDGE_SET(0x03);
- break;
- }
- if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
- con_reg |=
- TIMER_FLAG_MASK_SRC(flag) ==
- TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
- GPTU_CON_SRC_EXT_SET(0);
- else
- con_reg |=
- TIMER_FLAG_MASK_SRC(flag) ==
- TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
- GPTU_CON_SRC_EG_SET(0);
- con_reg |=
- TIMER_FLAG_MASK_SYNC(flag) ==
- TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
- GPTU_CON_SYNC_SET(1);
- con_reg |=
- TIMER_FLAG_MASK_INVERT(flag) ==
- TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
- con_reg |=
- TIMER_FLAG_MASK_SIZE(flag) ==
- TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
- GPTU_CON_EXT_SET(1);
- con_reg |=
- TIMER_FLAG_MASK_STOP(flag) ==
- TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
- con_reg |=
- TIMER_FLAG_MASK_TYPE(flag) ==
- TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
- GPTU_CON_CNT_SET(1);
- con_reg |=
- TIMER_FLAG_MASK_DIR(flag) ==
- TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-
- /*
- * Fill up running data.
- */
- timer_dev.timer[timer - FIRST_TIMER].flag = flag;
- timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
- timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
- if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
- timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
-
- /*
- * Enable GPTU module.
- */
- if (!timer_dev.f_gptu_on) {
- lq_enable_gptu();
- timer_dev.f_gptu_on = 1;
- }
-
- /*
- * Enable IRQ.
- */
- if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
- if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
- timer_dev.timer[timer - FIRST_TIMER].arg1 =
- (unsigned long) find_task_by_vpid((int) arg1);
-
- irnen_reg = 1 << (timer - FIRST_TIMER);
-
- if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
- || (TIMER_FLAG_MASK_HANDLE(flag) ==
- TIMER_FLAG_CALLBACK_IN_IRQ
- && timer_dev.timer[timer - FIRST_TIMER].arg1)) {
- enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
- timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
- }
- } else
- irnen_reg = 0;
-
- /*
- * Write config register, reload value and enable interrupt.
- */
- n = timer >> 1;
- X = timer & 0x01;
- *LQ_GPTU_CON(n, X) = con_reg;
- *LQ_GPTU_RELOAD(n, X) = value;
- /* printk("reload value = %d\n", (u32)value); */
- *LQ_GPTU_IRNEN |= irnen_reg;
-
- mutex_unlock(&timer_dev.gptu_mutex);
- printk("successful!\n");
- return ret;
-}
-EXPORT_SYMBOL(lq_request_timer);
-
-int lq_free_timer(unsigned int timer)
-{
- unsigned int flag;
- unsigned int mask;
- int n, X;
-
- if (!timer_dev.f_gptu_on)
- return -EINVAL;
-
- if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
- return -EINVAL;
-
- mutex_lock(&timer_dev.gptu_mutex);
-
- flag = timer_dev.timer[timer - FIRST_TIMER].flag;
- if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
- timer &= ~0x01;
-
- mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
- if (((timer_dev.occupation & mask) ^ mask)) {
- mutex_unlock(&timer_dev.gptu_mutex);
- return -EINVAL;
- }
-
- n = timer >> 1;
- X = timer & 0x01;
-
- if (GPTU_CON_EN(n, X))
- *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-
- *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
- *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
-
- if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
- disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
- timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
- }
-
- timer_dev.occupation &= ~mask;
- if (!timer_dev.occupation && timer_dev.f_gptu_on) {
- lq_disable_gptu();
- timer_dev.f_gptu_on = 0;
- }
-
- mutex_unlock(&timer_dev.gptu_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL(lq_free_timer);
-
-int lq_start_timer(unsigned int timer, int is_resume)
-{
- unsigned int flag;
- unsigned int mask;
- int n, X;
-
- if (!timer_dev.f_gptu_on)
- return -EINVAL;
-
- if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
- return -EINVAL;
-
- mutex_lock(&timer_dev.gptu_mutex);
-
- flag = timer_dev.timer[timer - FIRST_TIMER].flag;
- if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
- timer &= ~0x01;
-
- mask = (TIMER_FLAG_MASK_SIZE(flag) ==
- TIMER_FLAG_16BIT ? 1 : 3) << timer;
- if (((timer_dev.occupation & mask) ^ mask)) {
- mutex_unlock(&timer_dev.gptu_mutex);
- return -EINVAL;
- }
-
- n = timer >> 1;
- X = timer & 0x01;
-
- *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
-
- mutex_unlock(&timer_dev.gptu_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL(lq_start_timer);
-
-int lq_stop_timer(unsigned int timer)
-{
- unsigned int flag;
- unsigned int mask;
- int n, X;
-
- if (!timer_dev.f_gptu_on)
- return -EINVAL;
-
- if (timer < FIRST_TIMER
- || timer >= FIRST_TIMER + timer_dev.number_of_timers)
- return -EINVAL;
-
- mutex_lock(&timer_dev.gptu_mutex);
-
- flag = timer_dev.timer[timer - FIRST_TIMER].flag;
- if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
- timer &= ~0x01;
-
- mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
- if (((timer_dev.occupation & mask) ^ mask)) {
- mutex_unlock(&timer_dev.gptu_mutex);
- return -EINVAL;
- }
-
- n = timer >> 1;
- X = timer & 0x01;
-
- *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-
- mutex_unlock(&timer_dev.gptu_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL(lq_stop_timer);
-
-int lq_reset_counter_flags(u32 timer, u32 flags)
-{
- unsigned int oflag;
- unsigned int mask, con_reg;
- int n, X;
-
- if (!timer_dev.f_gptu_on)
- return -EINVAL;
-
- if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
- return -EINVAL;
-
- mutex_lock(&timer_dev.gptu_mutex);
-
- oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
- if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
- timer &= ~0x01;
-
- mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
- if (((timer_dev.occupation & mask) ^ mask)) {
- mutex_unlock(&timer_dev.gptu_mutex);
- return -EINVAL;
- }
-
- switch (TIMER_FLAG_MASK_EDGE(flags)) {
- default:
- case TIMER_FLAG_NONE_EDGE:
- con_reg = GPTU_CON_EDGE_SET(0x00);
- break;
- case TIMER_FLAG_RISE_EDGE:
- con_reg = GPTU_CON_EDGE_SET(0x01);
- break;
- case TIMER_FLAG_FALL_EDGE:
- con_reg = GPTU_CON_EDGE_SET(0x02);
- break;
- case TIMER_FLAG_ANY_EDGE:
- con_reg = GPTU_CON_EDGE_SET(0x03);
- break;
- }
- if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
- con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
- else
- con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
- con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
- con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
- con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
- con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
- con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
- con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-
- timer_dev.timer[timer - FIRST_TIMER].flag = flags;
- if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
- timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
-
- n = timer >> 1;
- X = timer & 0x01;
-
- *LQ_GPTU_CON(n, X) = con_reg;
- smp_wmb();
- printk(KERN_INFO "[%s]: counter%d oflags %#x, nflags %#x, GPTU_CON %#x\n", __func__, timer, oflag, flags, *LQ_GPTU_CON(n, X));
- mutex_unlock(&timer_dev.gptu_mutex);
- return 0;
-}
-EXPORT_SYMBOL(lq_reset_counter_flags);
-
-int lq_get_count_value(unsigned int timer, unsigned long *value)
-{
- unsigned int flag;
- unsigned int mask;
- int n, X;
-
- if (!timer_dev.f_gptu_on)
- return -EINVAL;
-
- if (timer < FIRST_TIMER
- || timer >= FIRST_TIMER + timer_dev.number_of_timers)
- return -EINVAL;
-
- mutex_lock(&timer_dev.gptu_mutex);
-
- flag = timer_dev.timer[timer - FIRST_TIMER].flag;
- if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
- timer &= ~0x01;
-
- mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
- if (((timer_dev.occupation & mask) ^ mask)) {
- mutex_unlock(&timer_dev.gptu_mutex);
- return -EINVAL;
- }
-
- n = timer >> 1;
- X = timer & 0x01;
-
- *value = *LQ_GPTU_COUNT(n, X);
-
- mutex_unlock(&timer_dev.gptu_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL(lq_get_count_value);
-
-u32 lq_cal_divider(unsigned long freq)
-{
- u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
- u32 clock_divider = 1;
- module_freq = fpi * 1000;
- do_div(module_freq, clock_divider * freq);
- return module_freq;
-}
-EXPORT_SYMBOL(lq_cal_divider);
-
-int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
- int is_ext_src, unsigned int handle_flag, unsigned long arg1,
- unsigned long arg2)
-{
- unsigned long divider;
- unsigned int flag;
-
- divider = lq_cal_divider(freq);
- if (divider == 0)
- return -EINVAL;
- flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
- | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
- | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
- | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
- | TIMER_FLAG_MASK_HANDLE(handle_flag);
-
- printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
- timer, freq, divider);
- return lq_request_timer(timer, flag, divider, arg1, arg2);
-}
-EXPORT_SYMBOL(lq_set_timer);
-
-int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
- unsigned long arg1, unsigned long arg2)
-{
- printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
- return lq_request_timer(timer, flag, reload, arg1, arg2);
-}
-EXPORT_SYMBOL(lq_set_counter);
-
-static long gptu_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int ret;
- struct gptu_ioctl_param param;
-
- if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
- return -EFAULT;
- copy_from_user(&param, (void *) arg, sizeof(param));
-
- if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
- || GPTU_SET_COUNTER) && param.timer < 2)
- || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
- && !access_ok(VERIFY_WRITE, arg,
- sizeof(struct gptu_ioctl_param)))
- return -EFAULT;
-
- switch (cmd) {
- case GPTU_REQUEST_TIMER:
- ret = lq_request_timer(param.timer, param.flag, param.value,
- (unsigned long) param.pid,
- (unsigned long) param.sig);
- if (ret > 0) {
- copy_to_user(&((struct gptu_ioctl_param *) arg)->
- timer, &ret, sizeof(&ret));
- ret = 0;
- }
- break;
- case GPTU_FREE_TIMER:
- ret = lq_free_timer(param.timer);
- break;
- case GPTU_START_TIMER:
- ret = lq_start_timer(param.timer, param.flag);
- break;
- case GPTU_STOP_TIMER:
- ret = lq_stop_timer(param.timer);
- break;
- case GPTU_GET_COUNT_VALUE:
- ret = lq_get_count_value(param.timer, &param.value);
- if (!ret)
- copy_to_user(&((struct gptu_ioctl_param *) arg)->
- value, &param.value,
- sizeof(param.value));
- break;
- case GPTU_CALCULATE_DIVIDER:
- param.value = lq_cal_divider(param.value);
- if (param.value == 0)
- ret = -EINVAL;
- else {
- copy_to_user(&((struct gptu_ioctl_param *) arg)->
- value, &param.value,
- sizeof(param.value));
- ret = 0;
- }
- break;
- case GPTU_SET_TIMER:
- ret = lq_set_timer(param.timer, param.value,
- TIMER_FLAG_MASK_STOP(param.flag) !=
- TIMER_FLAG_ONCE ? 1 : 0,
- TIMER_FLAG_MASK_SRC(param.flag) ==
- TIMER_FLAG_EXT_SRC ? 1 : 0,
- TIMER_FLAG_MASK_HANDLE(param.flag) ==
- TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
- TIMER_FLAG_NO_HANDLE,
- (unsigned long) param.pid,
- (unsigned long) param.sig);
- if (ret > 0) {
- copy_to_user(&((struct gptu_ioctl_param *) arg)->
- timer, &ret, sizeof(&ret));
- ret = 0;
- }
- break;
- case GPTU_SET_COUNTER:
- lq_set_counter(param.timer, param.flag, param.value, 0, 0);
- if (ret > 0) {
- copy_to_user(&((struct gptu_ioctl_param *) arg)->
- timer, &ret, sizeof(&ret));
- ret = 0;
- }
- break;
- default:
- ret = -ENOTTY;
- }
-
- return ret;
-}
-
-static int gptu_open(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static int gptu_release(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-int __init lq_gptu_init(void)
-{
- int ret;
- unsigned int i;
-
- ltq_w32(0, LQ_GPTU_IRNEN);
- ltq_w32(0xfff, LQ_GPTU_IRNCR);
-
- memset(&timer_dev, 0, sizeof(timer_dev));
- mutex_init(&timer_dev.gptu_mutex);
-
- lq_enable_gptu();
- timer_dev.number_of_timers = GPTU_ID_CFG * 2;
- lq_disable_gptu();
- if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
- timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
- printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
-
- ret = misc_register(&gptu_miscdev);
- if (ret) {
- printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
- return ret;
- } else {
- printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
- }
-
- for (i = 0; i < timer_dev.number_of_timers; i++) {
- ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
- if (ret) {
- for (; i >= 0; i--)
- free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
- misc_deregister(&gptu_miscdev);
- printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
- return ret;
- } else {
- timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
- disable_irq(timer_dev.timer[i].irq);
- printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
- }
- }
-
- return 0;
-}
-
-void __exit lq_gptu_exit(void)
-{
- unsigned int i;
-
- for (i = 0; i < timer_dev.number_of_timers; i++) {
- if (timer_dev.timer[i].f_irq_on)
- disable_irq(timer_dev.timer[i].irq);
- free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
- }
- lq_disable_gptu();
- misc_deregister(&gptu_miscdev);
-}
-
-module_init(lq_gptu_init);
-module_exit(lq_gptu_exit);
diff --git a/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq-pcie.c b/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq-pcie.c
deleted file mode 100644
index 84517dfbc3..0000000000
--- a/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq-pcie.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME : ifxmips_fixup_pcie.c
-** PROJECT : IFX UEIP for VRX200
-** MODULES : PCIe
-**
-** DATE : 02 Mar 2009
-** AUTHOR : Lei Chuanhua
-** DESCRIPTION : PCIe Root Complex Driver
-** COPYRIGHT : Copyright (c) 2009
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-** HISTORY
-** $Version $Date $Author $Comment
-** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
-*******************************************************************************/
-/*!
- \file ifxmips_fixup_pcie.c
- \ingroup IFX_PCIE
- \brief PCIe Fixup functions source file
-*/
-#include <linux/pci.h>
-#include <linux/pci_regs.h>
-#include <linux/pci_ids.h>
-
-#include <lantiq_soc.h>
-
-#include "pcie-lantiq.h"
-
-#define PCI_VENDOR_ID_INFINEON 0x15D1
-#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F
-#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011
-#define PCI_VENDOR_ID_LANTIQ 0x1BEF
-#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011
-
-
-
-static void __devinit
-ifx_pcie_fixup_resource(struct pci_dev *dev)
-{
- u32 reg;
-
- IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-
- IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s: fixup host controller %s (%04x:%04x)\n",
- __func__, pci_name(dev), dev->vendor, dev->device);
-
- /* Setup COMMAND register */
- reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* |
- PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR;
- pci_write_config_word(dev, PCI_COMMAND, reg);
- IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource);
-
-static void __devinit
-ifx_pcie_rc_class_early_fixup(struct pci_dev *dev)
-{
- IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-
- if (dev->devfn == PCI_DEVFN(0, 0) &&
- (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
-
- dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff);
-
- printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__);
- }
- IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-}
-
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE,
- ifx_pcie_rc_class_early_fixup);
-
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
- ifx_pcie_rc_class_early_fixup);
diff --git a/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq.c b/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq.c
deleted file mode 100644
index daf5ae9e42..0000000000
--- a/target/linux/lantiq/files/arch/mips/pci/fixup-lantiq.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/of_irq.h>
-#include <linux/of_pci.h>
-
-int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin) = NULL;
-int (*ltqpci_plat_arch_init)(struct pci_dev *dev) = NULL;
-int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
-int *ltq_pci_irq_map;
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- if (ltqpci_plat_arch_init)
- return ltqpci_plat_arch_init(dev);
-
- if (ltqpci_plat_dev_init)
- return ltqpci_plat_dev_init(dev);
-
- return 0;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (ltqpci_map_irq)
- return ltqpci_map_irq(dev, slot, pin);
- if (ltq_pci_irq_map[slot]) {
- dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, ltq_pci_irq_map[slot]);
- return ltq_pci_irq_map[slot];
- }
- printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
- slot);
-
- return 0;
-}
-
-
diff --git a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-msi.c b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-msi.c
deleted file mode 100644
index 9cbf639bb1..0000000000
--- a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-msi.c
+++ /dev/null
@@ -1,399 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME : ifxmips_pcie_msi.c
-** PROJECT : IFX UEIP for VRX200
-** MODULES : PCI MSI sub module
-**
-** DATE : 02 Mar 2009
-** AUTHOR : Lei Chuanhua
-** DESCRIPTION : PCIe MSI Driver
-** COPYRIGHT : Copyright (c) 2009
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-** HISTORY
-** $Date $Author $Comment
-** 02 Mar,2009 Lei Chuanhua Initial version
-*******************************************************************************/
-/*!
- \defgroup IFX_PCIE_MSI MSI OS APIs
- \ingroup IFX_PCIE
- \brief PCIe bus driver OS interface functions
-*/
-
-/*!
- \file ifxmips_pcie_msi.c
- \ingroup IFX_PCIE
- \brief PCIe MSI OS interface file
-*/
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/pci.h>
-#include <linux/msi.h>
-#include <linux/module.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-
-#include "pcie-lantiq.h"
-
-#define IFX_MSI_IRQ_NUM 16
-#define SM(_v, _f) (((_v) << _f##_S) & (_f))
-
-#define IFX_MSI_PIC_REG_BASE (KSEG1 | 0x1F700000)
-#define IFX_PCIE_MSI_IR0 (INT_NUM_IM4_IRL0 + 27)
-#define IFX_PCIE_MSI_IR1 (INT_NUM_IM4_IRL0 + 28)
-#define IFX_PCIE_MSI_IR2 (INT_NUM_IM4_IRL0 + 29)
-#define IFX_PCIE_MSI_IR3 (INT_NUM_IM0_IRL0 + 30)
-
-#define IFX_MSI_PCI_INT_DISABLE 0x80000000
-#define IFX_MSI_PIC_INT_LINE 0x30000000
-#define IFX_MSI_PIC_MSG_ADDR 0x0FFF0000
-#define IFX_MSI_PIC_MSG_DATA 0x0000FFFF
-#define IFX_MSI_PIC_BIG_ENDIAN 1
-#define IFX_MSI_PIC_INT_LINE_S 28
-#define IFX_MSI_PIC_MSG_ADDR_S 16
-#define IFX_MSI_PIC_MSG_DATA_S 0x0
-
-enum {
- IFX_PCIE_MSI_IDX0 = 0,
- IFX_PCIE_MSI_IDX1,
- IFX_PCIE_MSI_IDX2,
- IFX_PCIE_MSI_IDX3,
-};
-
-typedef struct ifx_msi_irq_idx {
- const int irq;
- const int idx;
-}ifx_msi_irq_idx_t;
-
-struct ifx_msi_pic {
- volatile u32 pic_table[IFX_MSI_IRQ_NUM];
- volatile u32 pic_endian; /* 0x40 */
-};
-typedef struct ifx_msi_pic *ifx_msi_pic_t;
-
-typedef struct ifx_msi_irq {
- const volatile ifx_msi_pic_t msi_pic_p;
- const u32 msi_phy_base;
- const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM];
- /*
- * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
- * in use.
- */
- u16 msi_free_irq_bitmask;
-
- /*
- * Each bit in msi_multiple_irq_bitmask tells that the device using
- * this bit in msi_free_irq_bitmask is also using the next bit. This
- * is used so we can disable all of the MSI interrupts when a device
- * uses multiple.
- */
- u16 msi_multiple_irq_bitmask;
-}ifx_msi_irq_t;
-
-static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = {
- {
- .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE,
- .msi_phy_base = PCIE_MSI_PHY_BASE,
- .msi_irq_idx = {
- {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
- {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
- {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
- {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
- {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
- {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
- {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
- {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
- },
- .msi_free_irq_bitmask = 0,
- .msi_multiple_irq_bitmask= 0,
- },
-#ifdef CONFIG_IFX_PCIE_2ND_CORE
- {
- .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE,
- .msi_phy_base = PCIE1_MSI_PHY_BASE,
- .msi_irq_idx = {
- {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
- {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
- {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
- {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
- {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
- {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
- {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
- {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
- },
- .msi_free_irq_bitmask = 0,
- .msi_multiple_irq_bitmask= 0,
-
- },
-#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-};
-
-/*
- * This lock controls updates to msi_free_irq_bitmask,
- * msi_multiple_irq_bitmask and pic register settting
- */
-static DEFINE_SPINLOCK(ifx_pcie_msi_lock);
-
-void pcie_msi_pic_init(int pcie_port)
-{
- spin_lock(&ifx_pcie_msi_lock);
- msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN;
- spin_unlock(&ifx_pcie_msi_lock);
-}
-
-/**
- * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
- * \brief Called when a driver request MSI interrupts instead of the
- * legacy INT A-D. This routine will allocate multiple interrupts
- * for MSI devices that support them. A device can override this by
- * programming the MSI control bits [6:4] before calling
- * pci_enable_msi().
- *
- * \param[in] pdev Device requesting MSI interrupts
- * \param[in] desc MSI descriptor
- *
- * \return -EINVAL Invalid pcie root port or invalid msi bit
- * \return 0 OK
- * \ingroup IFX_PCIE_MSI
- */
-int
-arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-{
- int irq, pos;
- u16 control;
- int irq_idx;
- int irq_step;
- int configured_private_bits;
- int request_private_bits;
- struct msi_msg msg;
- u16 search_mask;
- struct ifx_pci_controller *ctrl = pdev->bus->sysdata;
- int pcie_port = ctrl->port;
-
- IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev));
-
- /* XXX, skip RC MSI itself */
- if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
- IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__);
- return -EINVAL;
- }
-
- /*
- * Read the MSI config to figure out how many IRQs this device
- * wants. Most devices only want 1, which will give
- * configured_private_bits and request_private_bits equal 0.
- */
- pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control);
-
- /*
- * If the number of private bits has been configured then use
- * that value instead of the requested number. This gives the
- * driver the chance to override the number of interrupts
- * before calling pci_enable_msi().
- */
- configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4;
- if (configured_private_bits == 0) {
- /* Nothing is configured, so use the hardware requested size */
- request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
- }
- else {
- /*
- * Use the number of configured bits, assuming the
- * driver wanted to override the hardware request
- * value.
- */
- request_private_bits = configured_private_bits;
- }
-
- /*
- * The PCI 2.3 spec mandates that there are at most 32
- * interrupts. If this device asks for more, only give it one.
- */
- if (request_private_bits > 5) {
- request_private_bits = 0;
- }
-again:
- /*
- * The IRQs have to be aligned on a power of two based on the
- * number being requested.
- */
- irq_step = (1 << request_private_bits);
-
- /* Mask with one bit for each IRQ */
- search_mask = (1 << irq_step) - 1;
-
- /*
- * We're going to search msi_free_irq_bitmask_lock for zero
- * bits. This represents an MSI interrupt number that isn't in
- * use.
- */
- spin_lock(&ifx_pcie_msi_lock);
- for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) {
- if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) {
- msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos;
- msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos;
- break;
- }
- }
- spin_unlock(&ifx_pcie_msi_lock);
-
- /* Make sure the search for available interrupts didn't fail */
- if (pos >= IFX_MSI_IRQ_NUM) {
- if (request_private_bits) {
- IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free "
- "interrupts, trying just one", __func__, 1 << request_private_bits);
- request_private_bits = 0;
- goto again;
- }
- else {
- printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__);
- return -EINVAL;
- }
- }
- irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq;
- irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx;
-
- IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx);
-
- /*
- * Initialize MSI. This has to match the memory-write endianess from the device
- * Address bits [23:12]
- */
- spin_lock(&ifx_pcie_msi_lock);
- msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) |
- SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) |
- SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-
- /* Enable this entry */
- msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE;
- spin_unlock(&ifx_pcie_msi_lock);
-
- IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n",
- pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]);
-
- /* Update the number of IRQs the device has available to it */
- control &= ~PCI_MSI_FLAGS_QSIZE;
- control |= (request_private_bits << 4);
- pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control);
-
- irq_set_msi_desc(irq, desc);
- msg.address_hi = 0x0;
- msg.address_lo = msi_irqs[pcie_port].msi_phy_base;
- msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
- IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data);
-
- write_msi_msg(irq, &msg);
- IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
- return 0;
-}
-
-static int
-pcie_msi_irq_to_port(unsigned int irq, int *port)
-{
- int ret = 0;
-
- if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 ||
- irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) {
- *port = IFX_PCIE_PORT0;
- }
-#ifdef CONFIG_IFX_PCIE_2ND_CORE
- else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 ||
- irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) {
- *port = IFX_PCIE_PORT1;
- }
-#endif /* CONFIG_IFX_PCIE_2ND_CORE */
- else {
- printk(KERN_ERR "%s: Attempted to teardown illegal "
- "MSI interrupt (%d)\n", __func__, irq);
- ret = -EINVAL;
- }
- return ret;
-}
-
-/**
- * \fn void arch_teardown_msi_irq(unsigned int irq)
- * \brief Called when a device no longer needs its MSI interrupts. All
- * MSI interrupts for the device are freed.
- *
- * \param irq The devices first irq number. There may be multple in sequence.
- * \return none
- * \ingroup IFX_PCIE_MSI
- */
-void
-arch_teardown_msi_irq(unsigned int irq)
-{
- int pos;
- int number_irqs;
- u16 bitmask;
- int pcie_port;
-
- IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__);
-
- BUG_ON(irq > (INT_NUM_IM4_IRL0 + 31));
-
- if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) {
- return;
- }
-
- /* Shift the mask to the correct bit location, not always correct
- * Probally, the first match will be chosen.
- */
- for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) {
- if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq)
- && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) {
- break;
- }
- }
- if (pos >= IFX_MSI_IRQ_NUM) {
- printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__);
- return;
- }
- spin_lock(&ifx_pcie_msi_lock);
- /* Disable this entry */
- msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE;
- msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA);
- spin_unlock(&ifx_pcie_msi_lock);
- /*
- * Count the number of IRQs we need to free by looking at the
- * msi_multiple_irq_bitmask. Each bit set means that the next
- * IRQ is also owned by this device.
- */
- number_irqs = 0;
- while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) &&
- (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) {
- number_irqs++;
- }
- number_irqs++;
-
- /* Mask with one bit for each IRQ */
- bitmask = (1 << number_irqs) - 1;
-
- bitmask <<= pos;
- if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) {
- printk(KERN_ERR "%s: Attempted to teardown MSI "
- "interrupt (%d) not in use\n", __func__, irq);
- return;
- }
- /* Checks are done, update the in use bitmask */
- spin_lock(&ifx_pcie_msi_lock);
- msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask;
- msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1);
- spin_unlock(&ifx_pcie_msi_lock);
- IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
-MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
-
diff --git a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-phy.c b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-phy.c
deleted file mode 100644
index 9f5027d7cc..0000000000
--- a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq-phy.c
+++ /dev/null
@@ -1,408 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME : ifxmips_pcie_phy.c
-** PROJECT : IFX UEIP for VRX200
-** MODULES : PCIe PHY sub module
-**
-** DATE : 14 May 2009
-** AUTHOR : Lei Chuanhua
-** DESCRIPTION : PCIe Root Complex Driver
-** COPYRIGHT : Copyright (c) 2009
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-** HISTORY
-** $Version $Date $Author $Comment
-** 0.0.1 14 May,2009 Lei Chuanhua Initial version
-*******************************************************************************/
-/*!
- \file ifxmips_pcie_phy.c
- \ingroup IFX_PCIE
- \brief PCIe PHY PLL register programming source file
-*/
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/paccess.h>
-#include <linux/delay.h>
-
-#include "pcie-lantiq.h"
-
-/* PCIe PDI only supports 16 bit operation */
-
-#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \
- ((*(volatile u16 *) (__addr)) = (__data))
-
-#define IFX_PCIE_PHY_REG_READ16(__addr) \
- (*(volatile u16 *) (__addr))
-
-#define IFX_PCIE_PHY_REG16(__addr) \
- (*(volatile u16 *) (__addr))
-
-#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \
- u16 read_data; \
- u16 write_data; \
- read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \
- write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\
- IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \
-} while (0)
-
-#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */
-
-static void
-pcie_phy_comm_setup(int pcie_port)
-{
- /* PLL Setting */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-
- /* increase the bias reference voltage */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-
- /* Endcnt */
- IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-
- /* force */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-
- /* predrv_ser_en */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-
- /* ctrl_lim */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-
- /* ctrl */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-
- /* predrv_ser_en */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-
- /* RTERM*/
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-
- /* Improved 100MHz clock output */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-
- /* Reduced CDR BW to avoid glitches */
- IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-}
-
-#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-static void
-pcie_phy_36mhz_mode_setup(int pcie_port)
-{
- IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-
- /* en_ext_mmd_div_ratio */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-
- /* ext_mmd_div_ratio*/
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-
- /* pll_ensdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-
- /* en_const_sdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-
- /* mmd */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-
- /* lf_mode */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-
- /* const_sdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-
- /* const sdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-
- /* pllmod */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-
- IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-}
-#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-
-#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE
-static void
-pcie_phy_36mhz_ssc_mode_setup(int pcie_port)
-{
- IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-
- /* PLL Setting */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-
- /* Increase the bias reference voltage */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-
- /* Endcnt */
- IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-
- /* Force */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-
- /* Predrv_ser_en */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-
- /* ctrl_lim */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-
- /* ctrl */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-
- /* predrv_ser_en */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-
- /* RTERM*/
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-
- /* en_ext_mmd_div_ratio */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-
- /* ext_mmd_div_ratio*/
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-
- /* pll_ensdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400);
-
- /* en_const_sdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-
- /* mmd */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-
- /* lf_mode */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-
- /* const_sdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100);
- /* const sdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-
- /* pllmod */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF);
-
- /* improved 100MHz clock output */
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-
- /* reduced CDR BW to avoid glitches */
- IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-
- IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-}
-#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */
-
-#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE
-static void
-pcie_phy_25mhz_mode_setup(int pcie_port)
-{
- IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
- /* en_const_sdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-
- /* pll_ensdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200);
-
- /* en_ext_mmd_div_ratio*/
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002);
-
- /* ext_mmd_div_ratio*/
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070);
-
- /* mmd */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000);
-
- /* lf_mode */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000);
-
- IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-}
-#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */
-
-#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE
-static void
-pcie_phy_100mhz_mode_setup(int pcie_port)
-{
- IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
- /* en_ext_mmd_div_ratio */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-
- /* ext_mmd_div_ratio*/
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-
- /* pll_ensdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-
- /* en_const_sdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-
- /* mmd */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-
- /* lf_mode */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-
- /* const_sdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-
- /* const sdm */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-
- /* pllmod */
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-
- IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-}
-#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */
-
-static int
-pcie_phy_wait_startup_ready(int pcie_port)
-{
- int i;
-
- for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) {
- if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) {
- break;
- }
- udelay(10);
- }
- if (i >= IFX_PCIE_PLL_TIMEOUT) {
- printk(KERN_ERR "%s PLL Link timeout\n", __func__);
- return -1;
- }
- return 0;
-}
-
-static void
-pcie_phy_load_enable(int pcie_port, int slice)
-{
- /* Set the load_en of tx/rx slice to '1' */
- switch (slice) {
- case 1:
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010);
- break;
- case 2:
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010);
- break;
- case 3:
- IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002);
- break;
- }
-}
-
-static void
-pcie_phy_load_disable(int pcie_port, int slice)
-{
- /* set the load_en of tx/rx slice to '0' */
- switch (slice) {
- case 1:
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010);
- break;
- case 2:
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010);
- break;
- case 3:
- IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002);
- break;
- }
-}
-
-static void pcie_phy_load_war(int pcie_port)
-{
- int slice;
-
- for (slice = 1; slice < 4; slice++) {
- pcie_phy_load_enable(pcie_port, slice);
- udelay(1);
- pcie_phy_load_disable(pcie_port, slice);
- }
-}
-
-static void pcie_phy_tx2_modulation(int pcie_port)
-{
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF);
- mdelay(1);
- IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF);
-}
-
-static void pcie_phy_tx1_modulation(int pcie_port)
-{
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF);
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF);
- mdelay(1);
- IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF);
-}
-
-static void pcie_phy_tx_modulation_war(int pcie_port)
-{
- int i;
-#define PCIE_PHY_MODULATION_NUM 5
- for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) {
- pcie_phy_tx2_modulation(pcie_port);
- pcie_phy_tx1_modulation(pcie_port);
- }
-#undef PCIE_PHY_MODULATION_NUM
-}
-
-void pcie_phy_clock_mode_setup(int pcie_port)
-{
- pcie_pdi_big_endian(pcie_port);
-
- /* Enable PDI to access PCIe PHY register */
- pcie_pdi_pmu_enable(pcie_port);
-
- /* Configure PLL and PHY clock */
- pcie_phy_comm_setup(pcie_port);
-
-#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
- pcie_phy_36mhz_mode_setup(pcie_port);
-#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE)
- pcie_phy_36mhz_ssc_mode_setup(pcie_port);
-#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE)
- pcie_phy_25mhz_mode_setup(pcie_port);
-#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE)
- pcie_phy_100mhz_mode_setup(pcie_port);
-#else
- #error "PCIE PHY Clock Mode must be chosen first!!!!"
-#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-
- /* Enable PCIe PHY and make PLL setting take effect */
- pcie_phy_pmu_enable(pcie_port);
-
- /* Check if we are in startup_ready status */
- pcie_phy_wait_startup_ready(pcie_port);
-
- pcie_phy_load_war(pcie_port);
-
- /* Apply TX modulation workarounds */
- pcie_phy_tx_modulation_war(pcie_port);
-
-#ifdef IFX_PCI_PHY_REG_DUMP
- IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n");
- pcie_phy_reg_dump(pcie_port);
-#endif
-}
-
diff --git a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.c b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.c
deleted file mode 100644
index 1df55b5c02..0000000000
--- a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.c
+++ /dev/null
@@ -1,1146 +0,0 @@
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <asm/paccess.h>
-#include <linux/pci.h>
-#include <linux/pci_regs.h>
-#include <linux/platform_device.h>
-
-#define CONFIG_IFX_PCIE_1ST_CORE
-
-#include "pcie-lantiq.h"
-
-#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25)
-#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8)
-#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9)
-#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10)
-#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11)
-#define MS(_v, _f) (((_v) & (_f)) >> _f##_S)
-#define SM(_v, _f) (((_v) << _f##_S) & (_f))
-#define IFX_REG_SET_BIT(_f, _r) \
- IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
-#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
-#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000
-#define IFX_PCIE_PHY_LOOP_CNT 5
-
-static DEFINE_SPINLOCK(ifx_pcie_lock);
-
-int pcibios_1st_host_bus_nr(void);
-
-unsigned int g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
-
-static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
- {
- .ir_irq = {
- .irq = IFX_PCIE_IR,
- .name = "ifx_pcie_rc0",
- },
-
- .legacy_irq = {
- {
- .irq_bit = PCIE_IRN_INTA,
- .irq = IFX_PCIE_INTA,
- },
- {
- .irq_bit = PCIE_IRN_INTB,
- .irq = IFX_PCIE_INTB,
- },
- {
- .irq_bit = PCIE_IRN_INTC,
- .irq = IFX_PCIE_INTC,
- },
- {
- .irq_bit = PCIE_IRN_INTD,
- .irq = IFX_PCIE_INTD,
- },
- },
- },
-};
-
-static inline int pcie_ltssm_enable(int pcie_port)
-{
- int i;
-
- IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); /* Enable LTSSM */
-
- /* Wait for the link to come up */
- for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
- if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) {
- break;
- }
- udelay(10);
- }
- if (i >= IFX_PCIE_LTSSM_ENABLE_TIMEOUT) {
- IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s link timeout!!!!!\n", __func__);
- return -1;
- }
- return 0;
-}
-
-static inline void pcie_status_register_clear(int pcie_port)
-{
- IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
- IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
- IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
- IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
- IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
- IFX_REG_W32(0, PCIE_RSTS(pcie_port));
- IFX_REG_W32(0, PCIE_UES_R(pcie_port));
- IFX_REG_W32(0, PCIE_UEMR(pcie_port));
- IFX_REG_W32(0, PCIE_UESR(pcie_port));
- IFX_REG_W32(0, PCIE_CESR(pcie_port));
- IFX_REG_W32(0, PCIE_CEMR(pcie_port));
- IFX_REG_W32(0, PCIE_RESR(pcie_port));
- IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
- IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
- IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
- IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
- IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
- IFX_REG_W32(0, PCIE_QSR(pcie_port));
- IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
-}
-
-static inline int ifx_pcie_link_up(int pcie_port)
-{
- return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
-}
-
-static inline void pcie_mem_io_setup(int pcie_port)
-{
- unsigned int reg;
- /*
- * BAR[0:1] readonly register
- * RC contains only minimal BARs for packets mapped to this device
- * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
- * reside on the downstream side fo the bridge.
- */
- reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
- | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
- IFX_REG_W32(reg, PCIE_MBML(pcie_port));
-
- /* PCIe_PBML, same as MBML */
- IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
-
- /* IO Address Range */
- reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
- | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
- reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
- IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
-
- reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
- | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
- IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
-}
-
-static inline void pcie_msi_setup(int pcie_port)
-{
- unsigned int reg;
-
- /* XXX, MSI stuff should only apply to EP */
- /* MSI Capability: Only enable 32-bit addresses */
- reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
- reg &= ~PCIE_MCAPR_ADDR64_CAP;
- reg |= PCIE_MCAPR_MSI_ENABLE;
-
- /* Disable multiple message */
- reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
- IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
-}
-
-static inline void pcie_pm_setup(int pcie_port)
-{
- unsigned int reg;
-
- /* Enable PME, Soft reset enabled */
- reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
- reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
- IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
-}
-
-static inline void pcie_bus_setup(int pcie_port)
-{
- unsigned int reg;
-
- reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
- IFX_REG_W32(reg, PCIE_BNR(pcie_port));
-}
-
-static inline void pcie_device_setup(int pcie_port)
-{
- unsigned int reg;
-
- /* Device capability register, set up Maximum payload size */
- reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
- reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
- reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
-
- /* Only available for EP */
- reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
- IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
-
- /* Device control and status register */
- /* Set Maximum Read Request size for the device as a Requestor */
- reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
-
- /*
- * Request size can be larger than the MPS used, but the completions returned
- * for the read will be bounded by the MPS size.
- * In our system, Max request size depends on AHB burst size. It is 64 bytes.
- * but we set it as 128 as minimum one.
- */
- reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
- | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
-
- /* Enable relaxed ordering, no snoop, and all kinds of errors */
- reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
-
- IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
-}
-
-static inline void pcie_link_setup(int pcie_port)
-{
- unsigned int reg;
-
- /*
- * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM
- * L0s is reported during link training via TS1 order set by N_FTS
- */
- reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
- reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
- reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
- IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
-
- /* Link control and status register */
- reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-
- /* Link Enable, ASPM enabled */
- reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
-
-#ifdef CONFIG_PCIEASPM
- /*
- * We use the same physical reference clock that the platform provides on the connector
- * It paved the way for ASPM to calculate the new exit Latency
- */
- reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
- reg |= PCIE_LCTLSTS_COM_CLK_CFG;
- /*
- * We should disable ASPM by default except that we have dedicated power management support
- * Enable ASPM will cause the system hangup/instability, performance degration
- */
- reg |= PCIE_LCTLSTS_ASPM_ENABLE;
-#else
- reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
-#endif /* CONFIG_PCIEASPM */
-
- /*
- * The maximum size of any completion with data packet is bounded by the MPS setting
- * in device control register
- */
- /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
- reg &= ~ PCIE_LCTLSTS_RCB128;
- IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
-}
-
-static inline void pcie_error_setup(int pcie_port)
-{
- unsigned int reg;
-
- /*
- * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone
- * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE
- */
- reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
- reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
-
- IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
-
- /* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
- reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
- reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
- IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
-
- /* Uncorrectable Error Severity Register, ALL errors are FATAL */
- IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
-
- /* Correctable Error Mask Register, unmask <enable> all bits */
- reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
- reg &= ~PCIE_CORRECTABLE_ERR;
- IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
-
- /* Advanced Error Capabilities and Control Registr */
- reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
- reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
- IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
-
- /* Root Error Command Register, Report all types of errors */
- reg = IFX_REG_R32(PCIE_RECR(pcie_port));
- reg |= PCIE_RECR_ERR_REPORT_EN;
- IFX_REG_W32(reg, PCIE_RECR(pcie_port));
-
- /* Clear the Root status register */
- reg = IFX_REG_R32(PCIE_RESR(pcie_port));
- IFX_REG_W32(reg, PCIE_RESR(pcie_port));
-}
-
-static inline void pcie_root_setup(int pcie_port)
-{
- unsigned int reg;
-
- /* Root control and capabilities register */
- reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
- reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
- IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
-}
-
-static inline void pcie_vc_setup(int pcie_port)
-{
- unsigned int reg;
-
- /* Port VC Capability Register 2 */
- reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
- reg &= ~PCIE_PVC2_VC_ARB_WRR;
- reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
- IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
-
- /* VC0 Resource Capability Register */
- reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
- reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
- IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
-}
-
-static inline void pcie_port_logic_setup(int pcie_port)
-{
- unsigned int reg;
-
- /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */
- reg = IFX_REG_R32(PCIE_AFR(pcie_port));
- reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
- reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
- | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
- /* L0s and L1 entry latency */
- reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
- reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
- | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
- IFX_REG_W32(reg, PCIE_AFR(pcie_port));
-
- /* Port Link Control Register */
- reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
- reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */
- IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
-
- /* Lane Skew Register */
- reg = IFX_REG_R32(PCIE_LSR(pcie_port));
- /* Enable ACK/NACK and FC */
- reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE);
- IFX_REG_W32(reg, PCIE_LSR(pcie_port));
-
- /* Symbol Timer Register and Filter Mask Register 1 */
- reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
-
- /* Default SKP interval is very accurate already, 5us */
- /* Enable IO/CFG transaction */
- reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
- /* Disable FC WDT */
- reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
- IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
-
- /* Filter Masker Register 2 */
- reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
- reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
- IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
-
- /* VC0 Completion Receive Queue Control Register */
- reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
- reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
- reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
- IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
-}
-
-static inline void pcie_rc_cfg_reg_setup(int pcie_port)
-{
- /* diable ltssm */
- IFX_REG_W32(0, PCIE_RC_CCR(pcie_port));
-
- pcie_mem_io_setup(pcie_port);
- pcie_msi_setup(pcie_port);
- pcie_pm_setup(pcie_port);
- pcie_bus_setup(pcie_port);
- pcie_device_setup(pcie_port);
- pcie_link_setup(pcie_port);
- pcie_error_setup(pcie_port);
- pcie_root_setup(pcie_port);
- pcie_vc_setup(pcie_port);
- pcie_port_logic_setup(pcie_port);
-}
-
-static int ifx_pcie_wait_phy_link_up(int pcie_port)
-{
- int i;
-
- /* Wait for PHY link is up */
- for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
- if (ifx_pcie_link_up(pcie_port)) {
- break;
- }
- udelay(100);
- }
- if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
- printk(KERN_ERR "%s timeout\n", __func__);
- return -1;
- }
-
- /* Check data link up or not */
- if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
- printk(KERN_ERR "%s DLL link is still down\n", __func__);
- return -1;
- }
-
- /* Check Data link active or not */
- if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
- printk(KERN_ERR "%s DLL is not active\n", __func__);
- return -1;
- }
- return 0;
-}
-
-static inline int pcie_app_loigc_setup(int pcie_port)
-{
- IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
-
- /* Pull PCIe EP out of reset */
- pcie_device_rst_deassert(pcie_port);
-
- /* Start LTSSM training between RC and EP */
- pcie_ltssm_enable(pcie_port);
-
- /* Check PHY status after enabling LTSSM */
- if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) {
- return -1;
- }
- return 0;
-}
-
-/*
- * Must be done after ltssm due to based on negotiated link
- * width and payload size
- * Update the Replay Time Limit. Empirically, some PCIe
- * devices take a little longer to respond than expected under
- * load. As a workaround for this we configure the Replay Time
- * Limit to the value expected for a 512 byte MPS instead of
- * our actual 128 byte MPS. The numbers below are directly
- * from the PCIe spec table 3-4/5.
- */
-static inline void pcie_replay_time_update(int pcie_port)
-{
- unsigned int reg;
- int nlw;
- int rtl;
-
- reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-
- nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
- switch (nlw) {
- case PCIE_MAX_LENGTH_WIDTH_X1:
- rtl = 1677;
- break;
- case PCIE_MAX_LENGTH_WIDTH_X2:
- rtl = 867;
- break;
- case PCIE_MAX_LENGTH_WIDTH_X4:
- rtl = 462;
- break;
- case PCIE_MAX_LENGTH_WIDTH_X8:
- rtl = 258;
- break;
- default:
- rtl = 1677;
- break;
- }
- reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
- reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
- reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
- IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
-
- IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_ALTRT 0x%08x\n",
- __func__, IFX_REG_R32(PCIE_ALTRT(pcie_port)));
-}
-
-/*
- * Table 359 Enhanced Configuration Address Mapping1)
- * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
- * Memory Address PCI Express Configuration Space
- * A[(20+n-1):20] Bus Number 1 < n < 8
- * A[19:15] Device Number
- * A[14:12] Function Number
- * A[11:8] Extended Register Number
- * A[7:2] Register Number
- * A[1:0] Along with size of the access, used to generate Byte Enables
- * For VR9, only the address bits [22:0] are mapped to the configuration space:
- * . Address bits [22:20] select the target bus (1-of-8)1)
- * . Address bits [19:15] select the target device (1-of-32) on the bus
- * . Address bits [14:12] select the target function (1-of-8) within the device.
- * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
- * . Address bits [1:0] define the start byte location within the selected dword.
- */
-static inline unsigned int pcie_bus_addr(u8 bus_num, u16 devfn, int where)
-{
- unsigned int addr;
- u8 bus;
-
- if (!bus_num) {
- /* type 0 */
- addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
- } else {
- bus = bus_num;
- /* type 1, only support 8 buses */
- addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
- ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
- }
- IFX_PCIE_PRINT(PCIE_MSG_CFG, "%s: bus addr : %02x:%02x.%01x/%02x, addr=%08x\n",
- __func__, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), where, addr);
- return addr;
-}
-
-static int pcie_valid_config(int pcie_port, int bus, int dev)
-{
- /* RC itself */
- if ((bus == 0) && (dev == 0))
- return 1;
-
- /* No physical link */
- if (!ifx_pcie_link_up(pcie_port))
- return 0;
-
- /* Bus zero only has RC itself
- * XXX, check if EP will be integrated
- */
- if ((bus == 0) && (dev != 0))
- return 0;
-
- /* Maximum 8 buses supported for VRX */
- if (bus > 9)
- return 0;
-
- /*
- * PCIe is PtP link, one bus only supports only one device
- * except bus zero and PCIe switch which is virtual bus device
- * The following two conditions really depends on the system design
- * and attached the device.
- * XXX, how about more new switch
- */
- if ((bus == 1) && (dev != 0))
- return 0;
-
- if ((bus >= 3) && (dev != 0))
- return 0;
- return 1;
-}
-
-static inline unsigned int ifx_pcie_cfg_rd(int pcie_port, unsigned int reg)
-{
- return IFX_REG_R32((volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-}
-
-static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, unsigned int val)
-{
- IFX_REG_W32( val, (volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-}
-
-static inline unsigned int ifx_pcie_rc_cfg_rd(int pcie_port, unsigned int reg)
-{
- return IFX_REG_R32((volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-}
-
-static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, unsigned int val)
-{
- IFX_REG_W32(val, (volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-}
-
-unsigned int ifx_pcie_bus_enum_read_hack(int where, unsigned int value)
-{
- unsigned int tvalue = value;
-
- if (where == PCI_PRIMARY_BUS) {
- u8 primary, secondary, subordinate;
-
- primary = tvalue & 0xFF;
- secondary = (tvalue >> 8) & 0xFF;
- subordinate = (tvalue >> 16) & 0xFF;
- primary += pcibios_1st_host_bus_nr();
- secondary += pcibios_1st_host_bus_nr();
- subordinate += pcibios_1st_host_bus_nr();
- tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16);
- }
- return tvalue;
-}
-
-unsigned int ifx_pcie_bus_enum_write_hack(int where, unsigned int value)
-{
- unsigned int tvalue = value;
-
- if (where == PCI_PRIMARY_BUS) {
- u8 primary, secondary, subordinate;
-
- primary = tvalue & 0xFF;
- secondary = (tvalue >> 8) & 0xFF;
- subordinate = (tvalue >> 16) & 0xFF;
- if (primary > 0 && primary != 0xFF)
- primary -= pcibios_1st_host_bus_nr();
- if (secondary > 0 && secondary != 0xFF)
- secondary -= pcibios_1st_host_bus_nr();
- if (subordinate > 0 && subordinate != 0xFF)
- subordinate -= pcibios_1st_host_bus_nr();
- tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16);
- } else if (where == PCI_SUBORDINATE_BUS) {
- u8 subordinate = tvalue & 0xFF;
- subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
- tvalue = subordinate;
- }
- return tvalue;
-}
-
-/**
- * \fn static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
- * int where, int size, unsigned int *value)
- * \brief Read a value from configuration space
- *
- * \param[in] bus Pointer to pci bus
- * \param[in] devfn PCI device function number
- * \param[in] where PCI register number
- * \param[in] size Register read size
- * \param[out] value Pointer to return value
- * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
- * \return PCIBIOS_FUNC_NOT_SUPPORTED PCI function not supported
- * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found
- * \return PCIBIOS_SUCCESSFUL OK
- * \ingroup IFX_PCIE_OS
- */
-static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int *value)
-{
- unsigned int data = 0;
- int bus_number = bus->number;
- static const unsigned int mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
- int ret = PCIBIOS_SUCCESSFUL;
- struct ifx_pci_controller *ctrl = bus->sysdata;
- int pcie_port = ctrl->port;
-
- if (unlikely(size != 1 && size != 2 && size != 4)){
- ret = PCIBIOS_BAD_REGISTER_NUMBER;
- goto out;
- }
-
- /* Make sure the address is aligned to natural boundary */
- if (unlikely(((size - 1) & where))) {
- ret = PCIBIOS_BAD_REGISTER_NUMBER;
- goto out;
- }
-
- /*
- * If we are second controller, we have to cheat OS so that it assume
- * its bus number starts from 0 in host controller
- */
- bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-
- /*
- * We need to force the bus number to be zero on the root
- * bus. Linux numbers the 2nd root bus to start after all
- * busses on root 0.
- */
- if (bus->parent == NULL)
- bus_number = 0;
-
- /*
- * PCIe only has a single device connected to it. It is
- * always device ID 0. Don't bother doing reads for other
- * device IDs on the first segment.
- */
- if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
- ret = PCIBIOS_FUNC_NOT_SUPPORTED;
- goto out;
- }
-
- if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
- *value = 0xffffffff;
- ret = PCIBIOS_DEVICE_NOT_FOUND;
- goto out;
- }
-
- IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: %02x:%02x.%01x/%02x:%01d\n", __func__, bus_number,
- PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
-
- PCIE_IRQ_LOCK(ifx_pcie_lock);
- if (bus_number == 0) { /* RC itself */
- unsigned int t;
-
- t = (where & ~3);
- data = ifx_pcie_rc_cfg_rd(pcie_port, t);
- IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: rd local cfg, offset:%08x, data:%08x\n",
- __func__, t, data);
- } else {
- unsigned int addr = pcie_bus_addr(bus_number, devfn, where);
-
- data = ifx_pcie_cfg_rd(pcie_port, addr);
- if (pcie_port == IFX_PCIE_PORT0) {
-#ifdef CONFIG_IFX_PCIE_HW_SWAP
- data = le32_to_cpu(data);
-#endif /* CONFIG_IFX_PCIE_HW_SWAP */
- } else {
-#ifdef CONFIG_IFX_PCIE1_HW_SWAP
- data = le32_to_cpu(data);
-#endif /* CONFIG_IFX_PCIE_HW_SWAP */
- }
- }
- /* To get a correct PCI topology, we have to restore the bus number to OS */
- data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
-
- PCIE_IRQ_UNLOCK(ifx_pcie_lock);
- IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: read config: data=%08x raw=%08x\n",
- __func__, (data >> (8 * (where & 3))) & mask[size & 7], data);
-
- *value = (data >> (8 * (where & 3))) & mask[size & 7];
-out:
- return ret;
-}
-
-static unsigned int ifx_pcie_size_to_value(int where, int size, unsigned int data, unsigned int value)
-{
- unsigned int shift;
- unsigned int tdata = data;
-
- switch (size) {
- case 1:
- shift = (where & 0x3) << 3;
- tdata &= ~(0xffU << shift);
- tdata |= ((value & 0xffU) << shift);
- break;
- case 2:
- shift = (where & 3) << 3;
- tdata &= ~(0xffffU << shift);
- tdata |= ((value & 0xffffU) << shift);
- break;
- case 4:
- tdata = value;
- break;
- }
- return tdata;
-}
-
-/**
- * \fn static static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
- * int where, int size, unsigned int value)
- * \brief Write a value to PCI configuration space
- *
- * \param[in] bus Pointer to pci bus
- * \param[in] devfn PCI device function number
- * \param[in] where PCI register number
- * \param[in] size The register size to be written
- * \param[in] value The valule to be written
- * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
- * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found
- * \return PCIBIOS_SUCCESSFUL OK
- * \ingroup IFX_PCIE_OS
- */
-static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int value)
-{
- int bus_number = bus->number;
- int ret = PCIBIOS_SUCCESSFUL;
- struct ifx_pci_controller *ctrl = bus->sysdata;
- int pcie_port = ctrl->port;
- unsigned int tvalue = value;
- unsigned int data;
-
- /* Make sure the address is aligned to natural boundary */
- if (unlikely(((size - 1) & where))) {
- ret = PCIBIOS_BAD_REGISTER_NUMBER;
- goto out;
- }
- /*
- * If we are second controller, we have to cheat OS so that it assume
- * its bus number starts from 0 in host controller
- */
- bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-
- /*
- * We need to force the bus number to be zero on the root
- * bus. Linux numbers the 2nd root bus to start after all
- * busses on root 0.
- */
- if (bus->parent == NULL)
- bus_number = 0;
-
- if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
- ret = PCIBIOS_DEVICE_NOT_FOUND;
- goto out;
- }
-
- IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: %02x:%02x.%01x/%02x:%01d value=%08x\n", __func__,
- bus_number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value);
-
- /* XXX, some PCIe device may need some delay */
- PCIE_IRQ_LOCK(ifx_pcie_lock);
-
- /*
- * To configure the correct bus topology using native way, we have to cheat Os so that
- * it can configure the PCIe hardware correctly.
- */
- tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
-
- if (bus_number == 0) { /* RC itself */
- unsigned int t;
-
- t = (where & ~3);
- IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, fill:%08x\n", __func__, t, value);
- data = ifx_pcie_rc_cfg_rd(pcie_port, t);
- IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, data:%08x\n", __func__, t, data);
-
- data = ifx_pcie_size_to_value(where, size, data, tvalue);
-
- IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, value:%08x\n", __func__, t, data);
- ifx_pcie_rc_cfg_wr(pcie_port, t, data);
- IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, value:%08x\n",
- __func__, t, ifx_pcie_rc_cfg_rd(pcie_port, t));
- } else {
- unsigned int addr = pcie_bus_addr(bus_number, devfn, where);
-
- IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr cfg, offset:%08x, fill:%08x\n", __func__, addr, value);
- data = ifx_pcie_cfg_rd(pcie_port, addr);
- if (pcie_port == IFX_PCIE_PORT0) {
-#ifdef CONFIG_IFX_PCIE_HW_SWAP
- data = le32_to_cpu(data);
-#endif /* CONFIG_IFX_PCIE_HW_SWAP */
- } else {
-#ifdef CONFIG_IFX_PCIE1_HW_SWAP
- data = le32_to_cpu(data);
-#endif /* CONFIG_IFX_PCIE_HW_SWAP */
- }
- IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd cfg, offset:%08x, data:%08x\n", __func__, addr, data);
-
- data = ifx_pcie_size_to_value(where, size, data, tvalue);
- if (pcie_port == IFX_PCIE_PORT0) {
-#ifdef CONFIG_IFX_PCIE_HW_SWAP
- data = cpu_to_le32(data);
-#endif /* CONFIG_IFX_PCIE_HW_SWAP */
- } else {
-#ifdef CONFIG_IFX_PCIE1_HW_SWAP
- data = cpu_to_le32(data);
-#endif /* CONFIG_IFX_PCIE_HW_SWAP */
- }
- IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: wr cfg, offset:%08x, value:%08x\n", __func__, addr, data);
- ifx_pcie_cfg_wr(pcie_port, addr, data);
- IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: rd cfg, offset:%08x, value:%08x\n",
- __func__, addr, ifx_pcie_cfg_rd(pcie_port, addr));
- }
- PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-out:
- return ret;
-}
-
-static struct resource ifx_pcie_io_resource = {
- .name = "PCIe0 I/O space",
- .start = PCIE_IO_PHY_BASE,
- .end = PCIE_IO_PHY_END,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource ifx_pcie_mem_resource = {
- .name = "PCIe0 Memory space",
- .start = PCIE_MEM_PHY_BASE,
- .end = PCIE_MEM_PHY_END,
- .flags = IORESOURCE_MEM,
-};
-
-static struct pci_ops ifx_pcie_ops = {
- .read = ifx_pcie_read_config,
- .write = ifx_pcie_write_config,
-};
-
-static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
- {
- .pcic = {
- .pci_ops = &ifx_pcie_ops,
- .mem_resource = &ifx_pcie_mem_resource,
- .io_resource = &ifx_pcie_io_resource,
- },
- .port = IFX_PCIE_PORT0,
- },
-};
-
-static inline void pcie_core_int_clear_all(int pcie_port)
-{
- unsigned int reg;
- reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
- reg &= PCIE_RC_CORE_COMBINED_INT;
- IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
-}
-
-static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id)
-{
- struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
- int pcie_port = ctrl->port;
-
- IFX_PCIE_PRINT(PCIE_MSG_ISR, "PCIe RC error intr %d\n", irq);
- pcie_core_int_clear_all(pcie_port);
- return IRQ_HANDLED;
-}
-
-static int pcie_rc_core_int_init(int pcie_port)
-{
- int ret;
-
- /* Enable core interrupt */
- IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
-
- /* Clear it first */
- IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
- ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, IRQF_DISABLED,
- pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
- if (ret)
- printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
-
- return ret;
-}
-
-int ifx_pcie_bios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- unsigned int irq_bit = 0;
- int irq = 0;
- struct ifx_pci_controller *ctrl = dev->bus->sysdata;
- int pcie_port = ctrl->port;
-
- IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
-
- if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
- printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
- return -1;
- }
- /* Pin index so minus one */
- irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
- irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
- IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
- IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
- IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
- return irq;
-}
-
-/**
- * \fn int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
- * \brief Called to perform platform specific PCI setup
- *
- * \param[in] dev The Linux PCI device structure for the device to map
- * \return OK
- * \ingroup IFX_PCIE_OS
- */
-int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
-{
- u16 config;
- unsigned int dconfig;
- int pos;
- /* Enable reporting System errors and parity errors on all devices */
- /* Enable parity checking and error reporting */
- pci_read_config_word(dev, PCI_COMMAND, &config);
- config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
- PCI_COMMAND_FAST_BACK*/;
- pci_write_config_word(dev, PCI_COMMAND, config);
-
- if (dev->subordinate) {
- /* Set latency timers on sub bridges */
- pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
- /* More bridge error detection */
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
- config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
- }
- /* Enable the PCIe normal error reporting */
- pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (pos) {
- /* Disable system error generation in response to error messages */
- pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
- config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
- pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
-
- /* Clear PCIE Capability's Device Status */
- pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
- pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
-
- /* Update Device Control */
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
- /* Correctable Error Reporting */
- config |= PCI_EXP_DEVCTL_CERE;
- /* Non-Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_NFERE;
- /* Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_FERE;
- /* Unsupported Request */
- config |= PCI_EXP_DEVCTL_URRE;
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
- }
-
- /* Find the Advanced Error Reporting capability */
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (pos) {
- /* Clear Uncorrectable Error Status */
- pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
- /* Enable reporting of all uncorrectable errors */
- /* Uncorrectable Error Mask - turned on bits disable errors */
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
- /*
- * Leave severity at HW default. This only controls if
- * errors are reported as uncorrectable or
- * correctable, not if the error is reported.
- */
- /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
- /* Clear Correctable Error Status */
- pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
- /* Enable reporting of all correctable errors */
- /* Correctable Error Mask - turned on bits disable errors */
- pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
- /* Advanced Error Capabilities */
- pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
- /* ECRC Generation Enable */
- if (dconfig & PCI_ERR_CAP_ECRC_GENC)
- dconfig |= PCI_ERR_CAP_ECRC_GENE;
- /* ECRC Check Enable */
- if (dconfig & PCI_ERR_CAP_ECRC_CHKC)
- dconfig |= PCI_ERR_CAP_ECRC_CHKE;
- pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
-
- /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
- /* Enable Root Port's interrupt in response to error messages */
- pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
- PCI_ERR_ROOT_CMD_COR_EN |
- PCI_ERR_ROOT_CMD_NONFATAL_EN |
- PCI_ERR_ROOT_CMD_FATAL_EN);
- /* Clear the Root status register */
- pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
- }
- /* WAR, only 128 MRRS is supported, force all EPs to support this value */
- pcie_set_readrq(dev, 128);
- return 0;
-}
-
-static void pcie_phy_rst(int pcie_port)
-{
- pcie_phy_rst_assert(pcie_port);
- pcie_phy_rst_deassert(pcie_port);
- /* Make sure PHY PLL is stable */
- udelay(20);
-}
-
-static int pcie_rc_initialize(int pcie_port)
-{
- int i;
-
- pcie_rcu_endian_setup(pcie_port);
-
- pcie_ep_gpio_rst_init(pcie_port);
-
- /*
- * XXX, PCIe elastic buffer bug will cause not to be detected. One more
- * reset PCIe PHY will solve this issue
- */
- for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
- /* Disable PCIe PHY Analog part for sanity check */
- pcie_phy_pmu_disable(pcie_port);
- pcie_phy_rst(pcie_port);
- /* PCIe Core reset enabled, low active, sw programmed */
- pcie_core_rst_assert(pcie_port);
- /* Put PCIe EP in reset status */
- pcie_device_rst_assert(pcie_port);
- /* PCI PHY & Core reset disabled, high active, sw programmed */
- pcie_core_rst_deassert(pcie_port);
- /* Already in a quiet state, program PLL, enable PHY, check ready bit */
- pcie_phy_clock_mode_setup(pcie_port);
- /* Enable PCIe PHY and Clock */
- pcie_core_pmu_setup(pcie_port);
- /* Clear status registers */
- pcie_status_register_clear(pcie_port);
-#ifdef CONFIG_PCI_MSI
- pcie_msi_init(pcie_port);
-#endif /* CONFIG_PCI_MSI */
- pcie_rc_cfg_reg_setup(pcie_port);
-
- /* Once link is up, break out */
- if (pcie_app_loigc_setup(pcie_port) == 0)
- break;
- }
- if (i >= IFX_PCIE_PHY_LOOP_CNT) {
- printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
- return -EIO;
- }
- /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
- pcie_replay_time_update(pcie_port);
- return 0;
-}
-
-static int inline ifx_pcie_startup_port_nr(void)
-{
- int pcie_port = IFX_PCIE_PORT0;
-
- pcie_port = IFX_PCIE_PORT0;
- return pcie_port;
-}
-
-/**
- * \fn static int __init ifx_pcie_bios_init(void)
- * \brief Initialize the IFX PCIe controllers
- *
- * \return -EIO PCIe PHY link is not up
- * \return -ENOMEM Configuration/IO space failed to map
- * \return 0 OK
- * \ingroup IFX_PCIE_OS
- */
-extern int (*ltqpci_plat_arch_init)(struct pci_dev *dev);
-extern int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
-static int __devinit ltq_pcie_probe(struct platform_device *pdev)
-{
- char ver_str[128] = {0};
- void __iomem *io_map_base;
- int pcie_port;
- int startup_port;
- ltqpci_map_irq = ifx_pcie_bios_map_irq;
- ltqpci_plat_arch_init = ifx_pcie_bios_plat_dev_init;
- /* Enable AHB Master/ Slave */
- pcie_ahb_pmu_setup();
-
- startup_port = ifx_pcie_startup_port_nr();
-
- ltq_gpio_request(&pdev->dev, IFX_PCIE_GPIO_RESET, 0, 1, "pcie-reset");
-
- for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
- if (pcie_rc_initialize(pcie_port) == 0) {
- /* Otherwise, warning will pop up */
- io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
- if (io_map_base == NULL)
- return -ENOMEM;
- ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
- register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
- /* XXX, clear error status */
- pcie_rc_core_int_init(pcie_port);
- }
- }
-
- printk(KERN_INFO "%s", ver_str);
-return 0;
-}
-
-static struct platform_driver ltq_pcie_driver = {
- .probe = ltq_pcie_probe,
- .driver = {
- .name = "pcie-xway",
- .owner = THIS_MODULE,
- },
-};
-
-int __init pciebios_init(void)
-{
- return platform_driver_register(&ltq_pcie_driver);
-}
-
-arch_initcall(pciebios_init);
diff --git a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.h b/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.h
deleted file mode 100644
index d877c23a8a..0000000000
--- a/target/linux/lantiq/files/arch/mips/pci/pcie-lantiq.h
+++ /dev/null
@@ -1,1305 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME : ifxmips_pcie_reg.h
-** PROJECT : IFX UEIP for VRX200
-** MODULES : PCIe module
-**
-** DATE : 02 Mar 2009
-** AUTHOR : Lei Chuanhua
-** DESCRIPTION : PCIe Root Complex Driver
-** COPYRIGHT : Copyright (c) 2009
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-** HISTORY
-** $Version $Date $Author $Comment
-** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
-*******************************************************************************/
-#ifndef IFXMIPS_PCIE_REG_H
-#define IFXMIPS_PCIE_REG_H
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-/*!
- \file ifxmips_pcie_reg.h
- \ingroup IFX_PCIE
- \brief header file for PCIe module register definition
-*/
-/* PCIe Address Mapping Base */
-#define PCIE_CFG_PHY_BASE 0x1D000000UL
-#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE)
-#define PCIE_CFG_SIZE (8 * 1024 * 1024)
-
-#define PCIE_MEM_PHY_BASE 0x1C000000UL
-#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE)
-#define PCIE_MEM_SIZE (16 * 1024 * 1024)
-#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
-
-#define PCIE_IO_PHY_BASE 0x1D800000UL
-#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE)
-#define PCIE_IO_SIZE (1 * 1024 * 1024)
-#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
-
-#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000)
-#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900)
-#define PCIE_MSI_PHY_BASE 0x1F600000UL
-
-#define PCIE_PDI_PHY_BASE 0x1F106800UL
-#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE)
-#define PCIE_PDI_SIZE 0x400
-
-#define PCIE1_CFG_PHY_BASE 0x19000000UL
-#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE)
-#define PCIE1_CFG_SIZE (8 * 1024 * 1024)
-
-#define PCIE1_MEM_PHY_BASE 0x18000000UL
-#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE)
-#define PCIE1_MEM_SIZE (16 * 1024 * 1024)
-#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
-
-#define PCIE1_IO_PHY_BASE 0x19800000UL
-#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE)
-#define PCIE1_IO_SIZE (1 * 1024 * 1024)
-#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
-
-#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000)
-#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700)
-#define PCIE1_MSI_PHY_BASE 0x1F400000UL
-
-#define PCIE1_PDI_PHY_BASE 0x1F700400UL
-#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE)
-#define PCIE1_PDI_SIZE 0x400
-
-#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
-#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
-#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
-#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
-#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
-#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
-#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
-#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
-#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
-#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
-
-/* PCIe Application Logic Register */
-/* RC Core Control Register */
-#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
-/* This should be enabled after initializing configuratin registers
- * Also should check link status retraining bit
- */
-#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */
-
-/* RC Core Debug Register */
-#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
-#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */
-#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */
-#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1
-#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */
-#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4
-
-#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */
-#define PCIE_RC_DR_PM_DEV_STATE_S 9
-
-#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */
-#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */
-#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */
-
-/* Current Power State Definition */
-enum {
- PCIE_RC_DR_D0 = 0,
- PCIE_RC_DR_D1, /* Not supported */
- PCIE_RC_DR_D2, /* Not supported */
- PCIE_RC_DR_D3,
- PCIE_RC_DR_UN,
-};
-
-/* PHY Link Status Register */
-#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
-#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */
-
-/* Electromechanical Control Register */
-#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
-#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */
-#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */
-#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */
-#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */
-#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */
-#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */
-#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */
-#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */
-
-/* Interrupt Status Register */
-#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
-#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */
-#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */
-#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */
-#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */
-#define PCIE_IR_SR_AHB_LU_ERR_S 4
-#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */
-#define PCIE_IR_SR_INT_MSG_NUM_S 9
-#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
-#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27
-
-/* Message Control Register */
-#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
-#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */
-#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */
-
-#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
-
-/* Vendor-Defined Message Requester ID Register */
-#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38)
-#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF
-#define PCIE_VDM_RID_VDMRID_S 0
-
-/* ASPM Control Register */
-#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
-#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */
-#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */
-#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */
-
-/* Vendor Message DW0 Register */
-#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
-#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */
-#define PCIE_VM_MSG_DW0_TYPE_S 0
-#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */
-#define PCIE_VM_MSG_DW0_FORMAT_S 5
-#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */
-#define PCIE_VM_MSG_DW0_TC_S 12
-#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */
-#define PCIE_VM_MSG_DW0_ATTR_S 18
-#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */
-#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */
-#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */
-#define PCIE_VM_MSG_DW0_LEN_S 22
-
-/* Format Definition */
-enum {
- PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/
- PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */
- PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */
- PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */
-};
-
-/* Traffic Class Definition */
-enum {
- PCIE_VM_MSG_TC0 = 0,
- PCIE_VM_MSG_TC1,
- PCIE_VM_MSG_TC2,
- PCIE_VM_MSG_TC3,
- PCIE_VM_MSG_TC4,
- PCIE_VM_MSG_TC5,
- PCIE_VM_MSG_TC6,
- PCIE_VM_MSG_TC7,
-};
-
-/* Attributes Definition */
-enum {
- PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */
- PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */
- PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/
- PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */
-};
-
-/* Payload Size Definition */
-#define PCIE_VM_MSG_LEN_MIN 0
-#define PCIE_VM_MSG_LEN_MAX 1024
-
-/* Vendor Message DW1 Register */
-#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
-#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */
-#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8
-#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */
-#define PCIE_VM_MSG_DW1_CODE_S 16
-#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */
-#define PCIE_VM_MSG_DW1_TAG_S 24
-
-#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
-#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
-
-/* Vendor Message Request Register */
-#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
-#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */
-
-
-/* AHB Slave Side Band Control Register */
-#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
-#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */
-#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */
-#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */
-#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */
-#define PCIE_AHB_SSB_REQ_ATTR_S 3
-#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */
-#define PCIE_AHB_SSB_REQ_TC_S 5
-
-/* AHB Master SideBand Ctrl Register */
-#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
-#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */
-#define PCIE_AHB_MSB_RESP_ATTR_S 0
-#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */
-#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */
-#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */
-#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */
-#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */
-#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6
-
-/* AHB Control Register, fixed bus enumeration exception */
-#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
-#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001
-
-/* Interrupt Enalbe Register */
-#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
-#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
-#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
-
-/* PCIe interrupt enable/control/capture register definition */
-#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */
-#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */
-#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */
-#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */
-#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */
-#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */
-#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */
-#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */
-#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */
-#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */
-#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */
-#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */
-#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */
-#define PCIE_IRN_INTA 0x00002000 /* INTA */
-#define PCIE_IRN_INTB 0x00004000 /* INTB */
-#define PCIE_IRN_INTC 0x00008000 /* INTC */
-#define PCIE_IRN_INTD 0x00010000 /* INTD */
-#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */
-
-#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
- PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
- PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
- PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
- PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
-/* PCIe RC Configuration Register */
-#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
-
-/* Bit definition from pci_reg.h */
-#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
-#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
-#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
-/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
-#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
-#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
-
-#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
-/* Bus Number Register bits */
-#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF
-#define PCIE_BNR_PRIMARY_BUS_NUM_S 0
-#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00
-#define PCIE_PNR_SECONDARY_BUS_NUM_S 8
-#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000
-#define PCIE_PNR_SUB_BUS_NUM_S 16
-
-/* IO Base/Limit Register bits */
-#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */
-#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001
-#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0
-#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4
-#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100
-#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000
-#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12
-
-/* Non-prefetchable Memory Base/Limit Register bit */
-#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */
-#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0
-#define PCIE_MBML_MEM_BASE_ADDR_S 4
-#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000
-#define PCIE_MBML_MEM_LIMIT_ADDR_S 20
-
-/* Prefetchable Memory Base/Limit Register bit */
-#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */
-#define PCIE_PMBL_64BIT_ADDR 0x00000001
-#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0
-#define PCIE_PMBL_UPPER_12BIT_S 4
-#define PCIE_PMBL_E64MA 0x00010000
-#define PCIE_PMBL_END_ADDR 0xFFF00000
-#define PCIE_PMBL_END_ADDR_S 20
-#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */
-#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */
-
-/* I/O Base/Limit Upper 16 bits register */
-#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */
-#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF
-#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0
-#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000
-#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16
-
-#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
-#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
-
-/* Interrupt and Secondary Bridge Control Register */
-#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
-
-#define PCIE_INTRBCTRL_INT_LINE 0x000000FF
-#define PCIE_INTRBCTRL_INT_LINE_S 0
-#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00
-#define PCIE_INTRBCTRL_INT_PIN_S 8
-#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */
-#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */
-#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */
-#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */
-#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */
-#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */
-/* Others are read only */
-enum {
- PCIE_INTRBCTRL_INT_NON = 0,
- PCIE_INTRBCTRL_INTA,
- PCIE_INTRBCTRL_INTB,
- PCIE_INTRBCTRL_INTC,
- PCIE_INTRBCTRL_INTD,
-};
-
-#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
-
-/* Power Management Control and Status Register */
-#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
-
-#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */
-#define PCIE_PM_CSR_POWER_STATE_S 0
-#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */
-#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */
-#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */
-
-/* MSI Capability Register for EP */
-#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
-
-#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */
-#define PCIE_MCAPR_MSI_CAP_ID_S 0
-#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */
-#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8
-#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */
-#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */
-#define PCIE_MCAPR_MULTI_MSG_CAP_S 17
-#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */
-#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20
-#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */
-
-/* MSI Message Address Register */
-#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
-
-#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */
-
-/* MSI Message Upper Address Register */
-#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
-
-/* MSI Message Data Register */
-#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
-
-#define PCIE_MD_DATA 0x0000FFFF /* Message Data */
-#define PCIE_MD_DATA_S 0
-
-/* PCI Express Capability Register */
-#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
-
-#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */
-#define PCIE_XCAP_ID_S 0
-#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */
-#define PCIE_XCAP_NEXT_CAP_S 8
-#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */
-#define PCIE_XCAP_VER_S 16
-#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */
-#define PCIE_XCAP_DEV_PORT_TYPE_S 20
-#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */
-#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */
-#define PCIE_XCAP_MSG_INT_NUM_S 25
-
-/* Device Capability Register */
-#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
-
-#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */
-#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0
-#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */
-#define PCIE_DCAP_PHANTOM_FUNC_S 3
-#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */
-#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */
-#define PCIE_DCAP_EP_L0S_LATENCY_S 6
-#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */
-#define PCIE_DCAP_EP_L1_LATENCY_S 9
-#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */
-
-/* Maximum payload size supported */
-enum {
- PCIE_MAX_PAYLOAD_128 = 0,
- PCIE_MAX_PAYLOAD_256,
- PCIE_MAX_PAYLOAD_512,
- PCIE_MAX_PAYLOAD_1024,
- PCIE_MAX_PAYLOAD_2048,
- PCIE_MAX_PAYLOAD_4096,
-};
-
-/* Device Control and Status Register */
-#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
-
-#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */
-#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */
-#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */
-#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */
-#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */
-#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */
-#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5
-#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */
-#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */
-#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */
-#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/
-#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/
-#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12
-#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */
-#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */
-#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */
-#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */
-#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */
-#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */
-
-#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
- PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
- PCIE_DCTLSYS_UR_REQ_EN)
-
-/* Link Capability Register */
-#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
-#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */
-#define PCIE_LCAP_MAX_LINK_SPEED_S 0
-#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */
-#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4
-#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */
-#define PCIE_LCAP_ASPM_LEVEL_S 10
-#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */
-#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12
-#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */
-#define PCIE_LCAP_L1_EXIT_LATENCY_S 15
-#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */
-#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */
-#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */
-#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */
-#define PCIE_LCAP_PORT_NUM_S 24
-
-/* Maximum Length width definition */
-#define PCIE_MAX_LENGTH_WIDTH_RES 0x00
-#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */
-#define PCIE_MAX_LENGTH_WIDTH_X2 0x02
-#define PCIE_MAX_LENGTH_WIDTH_X4 0x04
-#define PCIE_MAX_LENGTH_WIDTH_X8 0x08
-#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C
-#define PCIE_MAX_LENGTH_WIDTH_X16 0x10
-#define PCIE_MAX_LENGTH_WIDTH_X32 0x20
-
-/* Active State Link PM definition */
-enum {
- PCIE_ASPM_RES0 = 0,
- PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */
- PCIE_ASPM_RES1,
- PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */
-};
-
-/* L0s Exit Latency definition */
-enum {
- PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */
- PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */
- PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */
- PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */
- PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */
- PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */
- PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */
- PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */
-};
-
-/* L1 Exit Latency definition */
-enum {
- PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */
- PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */
- PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */
- PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */
- PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */
- PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */
- PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */
- PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */
-};
-
-/* Link Control and Status Register */
-#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
-#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */
-#define PCIE_LCTLSTS_ASPM_ENABLE_S 0
-#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/
-#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */
-#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */
-#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */
-#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */
-#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */
-#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */
-#define PCIE_LCTLSTS_LINK_SPEED_S 16
-#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */
-#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
-#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */
-#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */
-#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */
-
-/* Slot Capabilities Register */
-#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
-
-/* Slot Capabilities */
-#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
-
-/* Root Control and Capability Register */
-#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
-#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */
-#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */
-#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */
-#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */
-#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
- PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
-/* Root Status Register */
-#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
-#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */
-#define PCIE_RSTS_PME_REQ_ID_S 0
-#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */
-#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */
-
-/* PCI Express Enhanced Capability Header */
-#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
-#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */
-#define PCIE_ENHANCED_CAP_ID_S 0
-#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */
-#define PCIE_ENHANCED_CAP_VER_S 16
-#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */
-#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20
-
-/* Uncorrectable Error Status Register */
-#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
-#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */
-#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */
-#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */
-#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */
-#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */
-#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */
-#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */
-#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */
-#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */
-#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */
-#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */
-#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
- PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \
- PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
- PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
-
-/* Uncorrectable Error Mask Register, Mask means no report */
-#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
-
-/* Uncorrectable Error Severity Register */
-#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
-
-/* Correctable Error Status Register */
-#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
-#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */
-#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */
-#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */
-#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */
-#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */
-#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */
-#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
- PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
-
-/* Correctable Error Mask Register */
-#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
-
-/* Advanced Error Capabilities and Control Register */
-#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
-#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */
-#define PCIE_AECCR_FIRST_ERR_PTR_S 0
-#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */
-#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */
-#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */
-#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */
-
-/* Header Log Register 1 */
-#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
-
-/* Header Log Register 2 */
-#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
-
-/* Header Log Register 3 */
-#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
-
-/* Header Log Register 4 */
-#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
-
-/* Root Error Command Register */
-#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
-#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */
-#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */
-#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */
-#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
- PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
-
-/* Root Error Status Register */
-#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
-#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */
-#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */
-#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */
-#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */
-#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */
-#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */
-#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */
-#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
-#define PCIE_RESR_AER_INT_MSG_NUM_S 27
-
-/* Error Source Indentification Register */
-#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
-#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF
-#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0
-#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000
-#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16
-
-/* VC Enhanced Capability Header */
-#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
-
-/* Port VC Capability Register */
-#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
-#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */
-#define PCIE_PVC1_EXT_VC_CNT_S 0
-#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */
-#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4
-#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */
-#define PCIE_PVC1_REF_CLK_S 8
-#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */
-#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10
-
-/* Extended Virtual Channel Count Defintion */
-#define PCIE_EXT_VC_CNT_MIN 0
-#define PCIE_EXT_VC_CNT_MAX 7
-
-/* Port Arbitration Table Entry Size Definition */
-enum {
- PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
- PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
- PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
- PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
-};
-
-/* Port VC Capability Register 2 */
-#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
-#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */
-#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
-#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
-#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
-#define PCIE_PVC2_VC_ARB_WRR 0x0000000F
-#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */
-#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24
-
-/* Port VC Control and Status Register */
-#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
-#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */
-#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */
-#define PCIE_PVCCRSR_VC_ARB_SEL_S 1
-#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */
-
-/* VC0 Resource Capability Register */
-#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
-#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */
-#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
-#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
-#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
-#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */
-#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */
-#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
- PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
- PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
-
-#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */
-#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */
-#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16
-#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */
-#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24
-
-/* VC0 Resource Control Register */
-#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
-#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */
-#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */
-#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */
-#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */
-#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */
-#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */
-#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */
-#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */
-#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */
-
-#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */
-#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */
-#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17
-#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */
-#define PCIE_VC0_RC0_VC_ID_S 24
-#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */
-
-/* VC0 Resource Status Register */
-#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
-#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */
-#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */
-
-/* Ack Latency Timer and Replay Timer Register */
-#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
-#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */
-#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
-#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */
-#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16
-
-/* Other Message Register */
-#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
-
-/* Port Force Link Register */
-#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
-#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */
-#define PCIE_PFLR_LINK_NUM_S 0
-#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */
-#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */
-#define PCIE_PFLR_LINK_STATE_S 16
-#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */
-#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24
-
-/* Ack Frequency Register */
-#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
-#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */
-#define PCIE_AFR_AF_S 0
-#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */
-#define PCIE_AFR_FTS_NUM_S 8
-#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/
-#define PCIE_AFR_COM_FTS_NUM_S 16
-#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */
-#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24
-#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */
-#define PCIE_AFR_L1_ENTRY_LATENCY_S 27
-#define PCIE_AFR_FTS_NUM_DEFAULT 32
-#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7
-#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5
-
-/* Port Link Control Register */
-#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
-#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */
-#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */
-#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */
-#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */
-#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */
-#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */
-#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */
-#define PCIE_PLCR_LINK_MODE_S 16
-#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */
-
-/* Lane Skew Register */
-#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
-#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */
-#define PCIE_LSR_LANE_SKEW_NUM_S 0
-#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */
-#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */
-#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */
-
-/* Symbol Number Register */
-#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
-#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */
-#define PCIE_SNR_TS_S 0
-#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */
-#define PCIE_SNR_SKP_S 8
-#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */
-#define PCIE_SNR_REPLAY_TIMER_S 14
-#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */
-#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19
-#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */
-#define PCIE_SNR_FC_TIMER_S 28
-
-/* Symbol Timer Register and Filter Mask Register 1 */
-#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
-#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */
-#define PCIE_STRFMR_SKP_INTERVAL_S 0
-#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */
-#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */
-#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */
-#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */
-#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */
-#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */
-#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */
-#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */
-#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */
-#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */
-#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */
-#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */
-#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */
-#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */
-#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */
-#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */
-#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */
-
-#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
-
-/* Filter Masker Register 2 */
-#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
-#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */
-#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */
-
-/* Debug Register 0 */
-#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
-
-/* Debug Register 1 */
-#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
-
-/* Transmit Posted FC Credit Status Register */
-#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
-#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */
-#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0
-#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */
-#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12
-
-/* Transmit Non-Posted FC Credit Status */
-#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
-#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */
-#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0
-#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */
-#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12
-
-/* Transmit Complete FC Credit Status Register */
-#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
-#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */
-#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0
-#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */
-#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12
-
-/* Queue Status Register */
-#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
-#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */
-#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */
-#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */
-
-/* VC Transmit Arbitration Register 1 */
-#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
-#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */
-#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */
-#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */
-#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */
-
-/* VC Transmit Arbitration Register 2 */
-#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
-#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */
-#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */
-#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */
-#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */
-
-/* VC0 Posted Receive Queue Control Register */
-#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
-#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */
-#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0
-#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */
-#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12
-#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */
-#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20
-#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */
-#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */
-
-/* VC0 Non-Posted Receive Queue Control */
-#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
-#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */
-#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0
-#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */
-#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12
-#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
-#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20
-
-/* VC0 Completion Receive Queue Control */
-#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
-#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */
-#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0
-#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */
-#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12
-#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */
-#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21
-
-/* Applicable to the above three registers */
-enum {
- PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
- PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2,
- PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4,
-};
-
-/* VC0 Posted Buffer Depth Register */
-#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
-#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */
-#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0
-#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */
-#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16
-
-/* VC0 Non-Posted Buffer Depth Register */
-#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
-#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */
-#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0
-#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
-#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16
-
-/* VC0 Completion Buffer Depth Register */
-#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
-#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */
-#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0
-#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */
-#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16
-
-/* PHY Status Register, all zeros in VR9 */
-#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
-
-/* PHY Control Register, all zeros in VR9 */
-#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
-
-/*
- * PCIe PDI PHY register definition, suppose all the following
- * stuff is confidential.
- * XXX, detailed bit definition
- */
-#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
-#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
-#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
-#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
-#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
-#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
-#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
-#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
-#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
-#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
-#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
-
-#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
-#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
-#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
-#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
-#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
-#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
-#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
-#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
-
-#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
-#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
-#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
-#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
-#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
-#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
-#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
-
-#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
-#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
-#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
-#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
-#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
-
-/* Interrupt related stuff */
-#define PCIE_LEGACY_DISABLE 0
-#define PCIE_LEGACY_INTA 1
-#define PCIE_LEGACY_INTB 2
-#define PCIE_LEGACY_INTC 3
-#define PCIE_LEGACY_INTD 4
-#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
-
-#define PCIE_IRQ_LOCK(lock) do { \
- unsigned long flags; \
- spin_lock_irqsave(&(lock), flags);
-#define PCIE_IRQ_UNLOCK(lock) \
- spin_unlock_irqrestore(&(lock), flags); \
-} while (0)
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
-#define IRQF_SHARED SA_SHIRQ
-#endif
-
-#define PCIE_MSG_MSI 0x00000001
-#define PCIE_MSG_ISR 0x00000002
-#define PCIE_MSG_FIXUP 0x00000004
-#define PCIE_MSG_READ_CFG 0x00000008
-#define PCIE_MSG_WRITE_CFG 0x00000010
-#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
-#define PCIE_MSG_REG 0x00000020
-#define PCIE_MSG_INIT 0x00000040
-#define PCIE_MSG_ERR 0x00000080
-#define PCIE_MSG_PHY 0x00000100
-#define PCIE_MSG_ANY 0x000001ff
-
-#define IFX_PCIE_PORT0 0
-#define IFX_PCIE_PORT1 1
-
-#ifdef CONFIG_IFX_PCIE_2ND_CORE
-#define IFX_PCIE_CORE_NR 2
-#else
-#define IFX_PCIE_CORE_NR 1
-#endif
-
-//#define IFX_PCIE_ERROR_INT
-
-//#define IFX_PCIE_DBG
-
-#if defined(IFX_PCIE_DBG)
-#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \
- if (g_pcie_debug_flag & (_m)) { \
- ifx_pcie_debug((_fmt), ##args); \
- } \
-} while (0)
-
-#define INLINE
-#else
-#define IFX_PCIE_PRINT(_m, _fmt, args...) \
- do {} while(0)
-#define INLINE inline
-#endif
-
-struct ifx_pci_controller {
- struct pci_controller pcic;
-
- /* RC specific, per host bus information */
- u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */
-};
-
-typedef struct ifx_pcie_ir_irq {
- const unsigned int irq;
- const char name[16];
-}ifx_pcie_ir_irq_t;
-
-typedef struct ifx_pcie_legacy_irq{
- const u32 irq_bit;
- const int irq;
-}ifx_pcie_legacy_irq_t;
-
-typedef struct ifx_pcie_irq {
- ifx_pcie_ir_irq_t ir_irq;
- ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
-}ifx_pcie_irq_t;
-
-extern u32 g_pcie_debug_flag;
-extern void ifx_pcie_debug(const char *fmt, ...);
-extern void pcie_phy_clock_mode_setup(int pcie_port);
-extern void pcie_msi_pic_init(int pcie_port);
-extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
-extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
-
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-
-#include <lantiq_soc.h>
-
-#define IFX_PCIE_GPIO_RESET 38
-#define IFX_REG_R32 ltq_r32
-#define IFX_REG_W32 ltq_w32
-#define CONFIG_IFX_PCIE_HW_SWAP
-#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C))
-#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010))
-#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/
-
-#define IFX_RCU (KSEG1 | 0x1F203000)
-#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */
-#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */
-#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */
-#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-
-#define IFX_PMU1_MODULE_PCIE_PHY (0)
-#define IFX_PMU1_MODULE_PCIE_CTRL (1)
-#define IFX_PMU1_MODULE_PDI (4)
-#define IFX_PMU1_MODULE_MSI (5)
-
-#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
-
-
-static inline void pcie_ep_gpio_rst_init(int pcie_port)
-{
-}
-
-static inline void pcie_ahb_pmu_setup(void)
-{
- struct clk *clk;
- clk = clk_get_sys("ltq_pcie", "ahb");
- clk_enable(clk);
- //ltq_pmu_enable(PMU_AHBM | PMU_AHBS);
-}
-
-static inline void pcie_rcu_endian_setup(int pcie_port)
-{
- u32 reg;
-
- reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-#ifdef CONFIG_IFX_PCIE_HW_SWAP
- reg |= IFX_RCU_AHB_BE_PCIE_M;
- reg |= IFX_RCU_AHB_BE_PCIE_S;
- reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-#else
- reg |= IFX_RCU_AHB_BE_PCIE_M;
- reg &= ~IFX_RCU_AHB_BE_PCIE_S;
- reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-#endif /* CONFIG_IFX_PCIE_HW_SWAP */
- IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
- IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-}
-
-static inline void pcie_phy_pmu_enable(int pcie_port)
-{
- struct clk *clk;
- clk = clk_get_sys("ltq_pcie", "phy");
- clk_enable(clk);
- //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY);
-}
-
-static inline void pcie_phy_pmu_disable(int pcie_port)
-{
- struct clk *clk;
- clk = clk_get_sys("ltq_pcie", "phy");
- clk_disable(clk);
- //ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY);
-}
-
-static inline void pcie_pdi_big_endian(int pcie_port)
-{
- u32 reg;
-
- /* SRAM2PDI endianness control. */
- reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
- /* Config AHB->PCIe and PDI endianness */
- reg |= IFX_RCU_AHB_BE_PCIE_PDI;
- IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-}
-
-static inline void pcie_pdi_pmu_enable(int pcie_port)
-{
- struct clk *clk;
- clk = clk_get_sys("ltq_pcie", "pdi");
- clk_enable(clk);
- //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI);
-}
-
-static inline void pcie_core_rst_assert(int pcie_port)
-{
- u32 reg;
-
- reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-
- /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */
- reg |= 0x00400000;
- IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-}
-
-static inline void pcie_core_rst_deassert(int pcie_port)
-{
- u32 reg;
-
- /* Make sure one micro-second delay */
- udelay(1);
-
- /* Reset PCIe PHY & Core, bit 22 */
- reg = IFX_REG_R32(IFX_RCU_RST_REQ);
- reg &= ~0x00400000;
- IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-}
-
-static inline void pcie_phy_rst_assert(int pcie_port)
-{
- u32 reg;
-
- reg = IFX_REG_R32(IFX_RCU_RST_REQ);
- reg |= 0x00001000; /* Bit 12 */
- IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-}
-
-static inline void pcie_phy_rst_deassert(int pcie_port)
-{
- u32 reg;
-
- /* Make sure one micro-second delay */
- udelay(1);
-
- reg = IFX_REG_R32(IFX_RCU_RST_REQ);
- reg &= ~0x00001000; /* Bit 12 */
- IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-}
-
-static inline void pcie_device_rst_assert(int pcie_port)
-{
- gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
- // ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-}
-
-static inline void pcie_device_rst_deassert(int pcie_port)
-{
- mdelay(100);
- gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-// ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-}
-
-static inline void pcie_core_pmu_setup(int pcie_port)
-{
- struct clk *clk;
- clk = clk_get_sys("ltq_pcie", "ctl");
- clk_enable(clk);
- clk = clk_get_sys("ltq_pcie", "bus");
- clk_enable(clk);
-
- //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL);
- //ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK);
-}
-
-static inline void pcie_msi_init(int pcie_port)
-{
- struct clk *clk;
- pcie_msi_pic_init(pcie_port);
- clk = clk_get_sys("ltq_pcie", "msi");
- clk_enable(clk);
- //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI);
-}
-
-static inline u32
-ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-{
- u32 tbus_number = bus_number;
-
-#ifdef CONFIG_IFX_PCI
- if (pcibios_host_nr() > 1) {
- tbus_number -= pcibios_1st_host_bus_nr();
- }
-#endif /* CONFIG_IFX_PCI */
- return tbus_number;
-}
-
-static inline u32
-ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-{
- struct pci_dev *pdev;
- u32 tvalue = value;
-
- /* Sanity check */
- pdev = pci_get_slot(bus, devfn);
- if (pdev == NULL) {
- return tvalue;
- }
-
- /* Only care about PCI bridge */
- if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
- return tvalue;
- }
-
- if (read) { /* Read hack */
- #ifdef CONFIG_IFX_PCI
- if (pcibios_host_nr() > 1) {
- tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
- }
- #endif /* CONFIG_IFX_PCI */
- }
- else { /* Write hack */
- #ifdef CONFIG_IFX_PCI
- if (pcibios_host_nr() > 1) {
- tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
- }
- #endif
- }
- return tvalue;
-}
-
-#endif /* IFXMIPS_PCIE_VR9_H */
-
diff --git a/target/linux/lantiq/files/drivers/i2c/busses/i2c-falcon.c b/target/linux/lantiq/files/drivers/i2c/busses/i2c-falcon.c
deleted file mode 100644
index f97ddb601a..0000000000
--- a/target/linux/lantiq/files/drivers/i2c/busses/i2c-falcon.c
+++ /dev/null
@@ -1,1040 +0,0 @@
-/*
- * Lantiq FALC(tm) ON - I2C bus adapter
- *
- * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
- */
-
-/*
- * CURRENT ISSUES:
- * - no high speed support
- * - supports only master mode
- * - ten bit mode is not tested (no slave devices)
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-
-#include <lantiq_soc.h>
-
-/* I2C Identification Register */
-/* Module ID */
-#define I2C_ID_ID_MASK 0x0000FF00
-/* field offset */
-#define I2C_ID_ID_OFFSET 8
-/* Revision */
-#define I2C_ID_REV_MASK 0x000000FF
-/* field offset */
-#define I2C_ID_REV_OFFSET 0
-
-/* I2C Error Interrupt Request Source Status Register */
-/* TXF_OFL */
-#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
-/* TXF_UFL */
-#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
-/* RXF_OFL */
-#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
-/* RXF_UFL */
-#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
-
-/* I2C Bus Status Register */
-/* Bus Status */
-#define I2C_BUS_STAT_BS_MASK 0x00000003
-/* I2C Bus is free. */
-#define I2C_BUS_STAT_BS_FREE 0x00000000
-/*
- * The device is working as master and has claimed the control
- * on the I2C-bus (busy master).
- */
-#define I2C_BUS_STAT_BS_BM 0x00000002
-
-/* I2C Interrupt Clear Register */
-/* Clear */
-#define I2C_ICR_BREQ_INT_CLR 0x00000008
-/* Clear */
-#define I2C_ICR_LBREQ_INT_CLR 0x00000004
-
-/* I2C RUN Control Register */
-/* Enable */
-#define I2C_RUN_CTRL_RUN_EN 0x00000001
-
-/* I2C Kernel Clock Control Register */
-/* field offset */
-#define I2C_CLC_RMC_OFFSET 8
-/* Enable */
-#define I2C_IMSC_I2C_P_INT_EN 0x00000020
-/* Enable */
-#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
-/* Enable */
-#define I2C_IMSC_BREQ_INT_EN 0x00000008
-/* Enable */
-#define I2C_IMSC_LBREQ_INT_EN 0x00000004
-
-/* I2C Fractional Divider Configuration Register */
-/* field offset */
-#define I2C_FDIV_CFG_INC_OFFSET 16
-/* field offset */
-#define I2C_FDIV_CFG_DEC_OFFSET 0
-
-/* I2C Fractional Divider (highspeed mode) Configuration Register */
-/* field offset */
-#define I2C_FDIV_HIGH_CFG_INC_OFFSET 16
-/* field offset */
-#define I2C_FDIV_HIGH_CFG_DEC_OFFSET 0
-
-/* I2C Address Register */
-/* Enable */
-#define I2C_ADDR_CFG_SOPE_EN 0x00200000
-/* Enable */
-#define I2C_ADDR_CFG_SONA_EN 0x00100000
-/* Enable */
-#define I2C_ADDR_CFG_MnS_EN 0x00080000
-
-/* I2C Protocol Interrupt Request Source Status Register */
-/* RX */
-#define I2C_P_IRQSS_RX 0x00000040
-/* TX_END */
-#define I2C_P_IRQSS_TX_END 0x00000020
-/* NACK */
-#define I2C_P_IRQSS_NACK 0x00000010
-/* AL */
-#define I2C_P_IRQSS_AL 0x00000008
-
-/* I2C Raw Interrupt Status Register */
-/* Read: Interrupt occurred. */
-#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
-/* Read: Interrupt occurred. */
-#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
-
-/* I2C End Data Control Register */
-/*
- * Set End of Transmission - Note: Do not write '1' to this bit when bus is
- * free. This will cause an abort after the first byte when a new transfer
- * is started.
- */
-#define I2C_ENDD_CTRL_SETEND 0x00000002
-/* TX FIFO Flow Control */
-#define I2C_FIFO_CFG_TXFC 0x00020000
-/* RX FIFO Flow Control */
-#define I2C_FIFO_CFG_RXFC 0x00010000
-/* Word aligned (character alignment of four characters) */
-#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
-/* Word aligned (character alignment of four characters) */
-#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
-/* 1 word */
-#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
-/* 1 word */
-#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
-
-
-/* I2C register structure */
-struct gpon_reg_i2c {
- /* I2C Kernel Clock Control Register */
- unsigned int clc; /* 0x00000000 */
- /* Reserved */
- unsigned int res_0; /* 0x00000004 */
- /* I2C Identification Register */
- unsigned int id; /* 0x00000008 */
- /* Reserved */
- unsigned int res_1; /* 0x0000000C */
- /*
- * I2C RUN Control Register - This register enables and disables the I2C
- * peripheral. Before enabling, the I2C has to be configured properly.
- * After enabling no configuration is possible
- */
- unsigned int run_ctrl; /* 0x00000010 */
- /*
- * I2C End Data Control Register - This register is used to either turn
- * around the data transmission direction or to address another slave
- * without sending a stop condition. Also the software can stop the
- * slave-transmitter by sending a not-accolade when working as
- * master-receiver or even stop data transmission immediately when
- * operating as master-transmitter. The writing to the bits of this
- * control register is only effective when in MASTER RECEIVES BYTES,
- * MASTER TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
- */
- unsigned int endd_ctrl; /* 0x00000014 */
- /*
- * I2C Fractional Divider Configuration Register - These register is
- * used to program the fractional divider of the I2C bus. Before the
- * peripheral is switched on by setting the RUN-bit the two (fixed)
- * values for the two operating frequencies are programmed into these
- * (configuration) registers. The Register FDIV_HIGH_CFG has the same
- * layout as I2C_FDIV_CFG.
- */
- unsigned int fdiv_cfg; /* 0x00000018 */
- /*
- * I2C Fractional Divider (highspeed mode) Configuration Register
- * These register is used to program the fractional divider of the I2C
- * bus. Before the peripheral is switched on by setting the RUN-bit the
- * two (fixed) values for the two operating frequencies are programmed
- * into these (configuration) registers. The Register FDIV_CFG has the
- * same layout as I2C_FDIV_CFG.
- */
- unsigned int fdiv_high_cfg; /* 0x0000001C */
- /* I2C Address Configuration Register */
- unsigned int addr_cfg; /* 0x00000020 */
- /*
- * I2C Bus Status Register - This register gives a status information
- * of the I2C. This additional information can be used by the software
- * to start proper actions.
- */
- unsigned int bus_stat; /* 0x00000024 */
- /* I2C FIFO Configuration Register */
- unsigned int fifo_cfg; /* 0x00000028 */
- /* I2C Maximum Received Packet Size Register */
- unsigned int mrps_ctrl; /* 0x0000002C */
- /* I2C Received Packet Size Status Register */
- unsigned int rps_stat; /* 0x00000030 */
- /* I2C Transmit Packet Size Register */
- unsigned int tps_ctrl; /* 0x00000034 */
- /* I2C Filled FIFO Stages Status Register */
- unsigned int ffs_stat; /* 0x00000038 */
- /* Reserved */
- unsigned int res_2; /* 0x0000003C */
- /* I2C Timing Configuration Register */
- unsigned int tim_cfg; /* 0x00000040 */
- /* Reserved */
- unsigned int res_3[7]; /* 0x00000044 */
- /* I2C Error Interrupt Request Source Mask Register */
- unsigned int err_irqsm; /* 0x00000060 */
- /* I2C Error Interrupt Request Source Status Register */
- unsigned int err_irqss; /* 0x00000064 */
- /* I2C Error Interrupt Request Source Clear Register */
- unsigned int err_irqsc; /* 0x00000068 */
- /* Reserved */
- unsigned int res_4; /* 0x0000006C */
- /* I2C Protocol Interrupt Request Source Mask Register */
- unsigned int p_irqsm; /* 0x00000070 */
- /* I2C Protocol Interrupt Request Source Status Register */
- unsigned int p_irqss; /* 0x00000074 */
- /* I2C Protocol Interrupt Request Source Clear Register */
- unsigned int p_irqsc; /* 0x00000078 */
- /* Reserved */
- unsigned int res_5; /* 0x0000007C */
- /* I2C Raw Interrupt Status Register */
- unsigned int ris; /* 0x00000080 */
- /* I2C Interrupt Mask Control Register */
- unsigned int imsc; /* 0x00000084 */
- /* I2C Masked Interrupt Status Register */
- unsigned int mis; /* 0x00000088 */
- /* I2C Interrupt Clear Register */
- unsigned int icr; /* 0x0000008C */
- /* I2C Interrupt Set Register */
- unsigned int isr; /* 0x00000090 */
- /* I2C DMA Enable Register */
- unsigned int dmae; /* 0x00000094 */
- /* Reserved */
- unsigned int res_6[8154]; /* 0x00000098 */
- /* I2C Transmit Data Register */
- unsigned int txd; /* 0x00008000 */
- /* Reserved */
- unsigned int res_7[4095]; /* 0x00008004 */
- /* I2C Receive Data Register */
- unsigned int rxd; /* 0x0000C000 */
- /* Reserved */
- unsigned int res_8[4095]; /* 0x0000C004 */
-};
-
-/* mapping for access macros */
-#define i2c ((struct gpon_reg_i2c *)priv->membase)
-#define reg_r32(reg) __raw_readl(reg)
-#define reg_w32(val, reg) __raw_writel(val, reg)
-#define reg_w32_mask(clear, set, reg) \
- reg_w32((reg_r32(reg) & ~(clear)) | (set), reg)
-#define reg_r32_table(reg, idx) reg_r32(&((uint32_t *)&reg)[idx])
-#define reg_w32_table(val, reg, idx) reg_w32(val, &((uint32_t *)&reg)[idx])
-
-#define i2c_r32(reg) reg_r32(&i2c->reg)
-#define i2c_w32(val, reg) reg_w32(val, &i2c->reg)
-#define i2c_w32_mask(clear, set, reg) reg_w32_mask(clear, set, &i2c->reg)
-
-#define DRV_NAME "i2c-falcon"
-#define DRV_VERSION "1.01"
-
-#define FALCON_I2C_BUSY_TIMEOUT 20 /* ms */
-
-#ifdef DEBUG
-#define FALCON_I2C_XFER_TIMEOUT (25 * HZ)
-#else
-#define FALCON_I2C_XFER_TIMEOUT HZ
-#endif
-#if defined(DEBUG) && 0
-#define PRINTK(arg...) pr_info(arg)
-#else
-#define PRINTK(arg...) do {} while (0)
-#endif
-
-#define FALCON_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \
- I2C_IMSC_I2C_ERR_INT_EN)
-
-#define FALCON_I2C_ARB_LOST (1 << 0)
-#define FALCON_I2C_NACK (1 << 1)
-#define FALCON_I2C_RX_UFL (1 << 2)
-#define FALCON_I2C_RX_OFL (1 << 3)
-#define FALCON_I2C_TX_UFL (1 << 4)
-#define FALCON_I2C_TX_OFL (1 << 5)
-
-struct falcon_i2c {
- struct mutex mutex;
-
- enum {
- FALCON_I2C_MODE_100 = 1,
- FALCON_I2C_MODE_400 = 2,
- FALCON_I2C_MODE_3400 = 3
- } mode; /* current speed mode */
-
- struct clk *clk; /* clock input for i2c hardware block */
- struct gpon_reg_i2c __iomem *membase; /* base of mapped registers */
- int irq_lb, irq_b, irq_err, irq_p; /* last burst, burst, error,
- protocol IRQs */
-
- struct i2c_adapter adap;
- struct device *dev;
-
- struct completion cmd_complete;
-
- /* message transfer data */
- /* current message */
- struct i2c_msg *current_msg;
- /* number of messages to handle */
- int msgs_num;
- /* current buffer */
- u8 *msg_buf;
- /* remaining length of current buffer */
- u32 msg_buf_len;
- /* error status of the current transfer */
- int msg_err;
-
- /* master status codes */
- enum {
- STATUS_IDLE,
- STATUS_ADDR, /* address phase */
- STATUS_WRITE,
- STATUS_READ,
- STATUS_READ_END,
- STATUS_STOP
- } status;
-};
-
-static irqreturn_t falcon_i2c_isr(int irq, void *dev_id);
-
-static inline void enable_burst_irq(struct falcon_i2c *priv)
-{
- i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
-}
-static inline void disable_burst_irq(struct falcon_i2c *priv)
-{
- i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
-}
-
-static void prepare_msg_send_addr(struct falcon_i2c *priv)
-{
- struct i2c_msg *msg = priv->current_msg;
- int rd = !!(msg->flags & I2C_M_RD);
- u16 addr = msg->addr;
-
- /* new i2c_msg */
- priv->msg_buf = msg->buf;
- priv->msg_buf_len = msg->len;
- if (rd)
- priv->status = STATUS_READ;
- else
- priv->status = STATUS_WRITE;
-
- /* send slave address */
- if (msg->flags & I2C_M_TEN) {
- i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
- i2c_w32(addr & 0xff, txd);
- } else
- i2c_w32((addr & 0x7f) << 1 | rd, txd);
-}
-
-static void set_tx_len(struct falcon_i2c *priv)
-{
- struct i2c_msg *msg = priv->current_msg;
- int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
-
- PRINTK("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? ('R') : ('T'));
-
- priv->status = STATUS_ADDR;
-
- if (!(msg->flags & I2C_M_RD)) {
- len += msg->len;
- } else {
- /* set maximum received packet size (before rx int!) */
- i2c_w32(msg->len, mrps_ctrl);
- }
- i2c_w32(len, tps_ctrl);
- enable_burst_irq(priv);
-}
-
-static int falcon_i2c_hw_init(struct i2c_adapter *adap)
-{
- struct falcon_i2c *priv = i2c_get_adapdata(adap);
-
- /* disable bus */
- i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-
-#ifndef DEBUG
- /* set normal operation clock divider */
- i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
-#else
- /* for debugging a higher divider value! */
- i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
-#endif
-
- /* set frequency */
- if (priv->mode == FALCON_I2C_MODE_100) {
- dev_dbg(priv->dev, "set standard mode (100 kHz)\n");
- i2c_w32(0, fdiv_high_cfg);
- i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) |
- (499 << I2C_FDIV_CFG_DEC_OFFSET),
- fdiv_cfg);
- } else if (priv->mode == FALCON_I2C_MODE_400) {
- dev_dbg(priv->dev, "set fast mode (400 kHz)\n");
- i2c_w32(0, fdiv_high_cfg);
- i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) |
- (124 << I2C_FDIV_CFG_DEC_OFFSET),
- fdiv_cfg);
- } else if (priv->mode == FALCON_I2C_MODE_3400) {
- dev_dbg(priv->dev, "set high mode (3.4 MHz)\n");
- i2c_w32(0, fdiv_cfg);
- /* TODO recalculate value for 100MHz input */
- i2c_w32((41 << I2C_FDIV_HIGH_CFG_INC_OFFSET) |
- (152 << I2C_FDIV_HIGH_CFG_DEC_OFFSET),
- fdiv_high_cfg);
- } else {
- dev_warn(priv->dev, "unknown mode\n");
- return -ENODEV;
- }
-
- /* configure fifo */
- i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
- I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
- I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
- I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
- I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
- I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */
- fifo_cfg);
-
- /* configure address */
- i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data
- in the fifo */
- I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */
- I2C_ADDR_CFG_MnS_EN | /* we are master device */
- 0, /* our slave address (not used!) */
- addr_cfg);
-
- /* enable bus */
- i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
-
- return 0;
-}
-
-static int falcon_i2c_wait_bus_not_busy(struct falcon_i2c *priv)
-{
- int timeout = FALCON_I2C_BUSY_TIMEOUT;
-
- while ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK)
- != I2C_BUS_STAT_BS_FREE) {
- if (timeout <= 0) {
- dev_warn(priv->dev, "timeout waiting for bus ready\n");
- return -ETIMEDOUT;
- }
- timeout--;
- mdelay(1);
- }
-
- return 0;
-}
-
-static void falcon_i2c_tx(struct falcon_i2c *priv, int last)
-{
- if (priv->msg_buf_len && priv->msg_buf) {
- i2c_w32(*priv->msg_buf, txd);
-
- if (--priv->msg_buf_len)
- priv->msg_buf++;
- else
- priv->msg_buf = NULL;
- } else
- last = 1;
-
- if (last)
- disable_burst_irq(priv);
-}
-
-static void falcon_i2c_rx(struct falcon_i2c *priv, int last)
-{
- u32 fifo_stat, timeout;
- if (priv->msg_buf_len && priv->msg_buf) {
- timeout = 5000000;
- do {
- fifo_stat = i2c_r32(ffs_stat);
- } while (!fifo_stat && --timeout);
- if (!timeout) {
- last = 1;
- PRINTK("\nrx timeout\n");
- goto err;
- }
- while (fifo_stat) {
- *priv->msg_buf = i2c_r32(rxd);
- if (--priv->msg_buf_len)
- priv->msg_buf++;
- else {
- priv->msg_buf = NULL;
- last = 1;
- break;
- }
- #if 0
- fifo_stat = i2c_r32(ffs_stat);
- #else
- /* do not read more than burst size, otherwise no "last
- burst" is generated and the transaction is blocked! */
- fifo_stat = 0;
- #endif
- }
- } else {
- last = 1;
- }
-err:
- if (last) {
- disable_burst_irq(priv);
-
- if (priv->status == STATUS_READ_END) {
- /* do the STATUS_STOP and complete() here, as sometimes
- the tx_end is already seen before this is finished */
- priv->status = STATUS_STOP;
- complete(&priv->cmd_complete);
- } else {
- i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
- priv->status = STATUS_READ_END;
- }
- }
-}
-
-static void falcon_i2c_xfer_init(struct falcon_i2c *priv)
-{
- /* enable interrupts */
- i2c_w32(FALCON_I2C_IMSC_DEFAULT_MASK, imsc);
-
- /* trigger transfer of first msg */
- set_tx_len(priv);
-}
-
-static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
-{
-#if defined(DEBUG)
- int i, j;
- pr_info("Messages %d %s\n", num, rx ? "out" : "in");
- for (i = 0; i < num; i++) {
- pr_info("%2d %cX Msg(%d) addr=0x%X: ", i,
- (msgs[i].flags & I2C_M_RD) ? ('R') : ('T'),
- msgs[i].len, msgs[i].addr);
- if (!(msgs[i].flags & I2C_M_RD) || rx) {
- for (j = 0; j < msgs[i].len; j++)
- printk("%02X ", msgs[i].buf[j]);
- }
- printk("\n");
- }
-#endif
-}
-
-static void falcon_i2c_release_bus(struct falcon_i2c *priv)
-{
- if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
- i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-}
-
-static int falcon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
- int num)
-{
- struct falcon_i2c *priv = i2c_get_adapdata(adap);
- int ret;
-
- dev_dbg(priv->dev, "xfer %u messages\n", num);
- dump_msgs(msgs, num, 0);
-
- mutex_lock(&priv->mutex);
-
- INIT_COMPLETION(priv->cmd_complete);
- priv->current_msg = msgs;
- priv->msgs_num = num;
- priv->msg_err = 0;
- priv->status = STATUS_IDLE;
-
- /* wait for the bus to become ready */
- ret = falcon_i2c_wait_bus_not_busy(priv);
- if (ret)
- goto done;
-
- while (priv->msgs_num) {
- /* start the transfers */
- falcon_i2c_xfer_init(priv);
-
- /* wait for transfers to complete */
- ret = wait_for_completion_interruptible_timeout(
- &priv->cmd_complete, FALCON_I2C_XFER_TIMEOUT);
- if (ret == 0) {
- dev_err(priv->dev, "controller timed out\n");
- falcon_i2c_hw_init(adap);
- ret = -ETIMEDOUT;
- goto done;
- } else if (ret < 0)
- goto done;
-
- if (priv->msg_err) {
- if (priv->msg_err & FALCON_I2C_NACK)
- ret = -ENXIO;
- else
- ret = -EREMOTEIO;
- goto done;
- }
- if (--priv->msgs_num)
- priv->current_msg++;
- }
- /* no error? */
- ret = num;
-
-done:
- falcon_i2c_release_bus(priv);
-
- mutex_unlock(&priv->mutex);
-
- if (ret >= 0)
- dump_msgs(msgs, num, 1);
-
- PRINTK("XFER ret %d\n", ret);
- return ret;
-}
-
-static irqreturn_t falcon_i2c_isr_burst(int irq, void *dev_id)
-{
- struct falcon_i2c *priv = dev_id;
- struct i2c_msg *msg = priv->current_msg;
- int last = (irq == priv->irq_lb);
-
- if (last)
- PRINTK("LB ");
- else
- PRINTK("B ");
-
- if (msg->flags & I2C_M_RD) {
- switch (priv->status) {
- case STATUS_ADDR:
- PRINTK("X");
- prepare_msg_send_addr(priv);
- disable_burst_irq(priv);
- break;
- case STATUS_READ:
- case STATUS_READ_END:
- PRINTK("R");
- falcon_i2c_rx(priv, last);
- break;
- default:
- disable_burst_irq(priv);
- PRINTK("Status R %d\n", priv->status);
- break;
- }
- } else {
- switch (priv->status) {
- case STATUS_ADDR:
- PRINTK("x");
- prepare_msg_send_addr(priv);
- break;
- case STATUS_WRITE:
- PRINTK("w");
- falcon_i2c_tx(priv, last);
- break;
- default:
- disable_burst_irq(priv);
- PRINTK("Status W %d\n", priv->status);
- break;
- }
- }
-
- i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
- return IRQ_HANDLED;
-}
-
-static void falcon_i2c_isr_prot(struct falcon_i2c *priv)
-{
- u32 i_pro = i2c_r32(p_irqss);
-
- PRINTK("i2c-p");
-
- /* not acknowledge */
- if (i_pro & I2C_P_IRQSS_NACK) {
- priv->msg_err |= FALCON_I2C_NACK;
- PRINTK(" nack");
- }
-
- /* arbitration lost */
- if (i_pro & I2C_P_IRQSS_AL) {
- priv->msg_err |= FALCON_I2C_ARB_LOST;
- PRINTK(" arb-lost");
- }
- /* tx -> rx switch */
- if (i_pro & I2C_P_IRQSS_RX)
- PRINTK(" rx");
-
- /* tx end */
- if (i_pro & I2C_P_IRQSS_TX_END)
- PRINTK(" txend");
- PRINTK("\n");
-
- if (!priv->msg_err) {
- /* tx -> rx switch */
- if (i_pro & I2C_P_IRQSS_RX) {
- priv->status = STATUS_READ;
- enable_burst_irq(priv);
- }
- if (i_pro & I2C_P_IRQSS_TX_END) {
- if (priv->status == STATUS_READ)
- priv->status = STATUS_READ_END;
- else {
- disable_burst_irq(priv);
- priv->status = STATUS_STOP;
- }
- }
- }
-
- i2c_w32(i_pro, p_irqsc);
-}
-
-static irqreturn_t falcon_i2c_isr(int irq, void *dev_id)
-{
- u32 i_raw, i_err = 0;
- struct falcon_i2c *priv = dev_id;
-
- i_raw = i2c_r32(mis);
- PRINTK("i_raw 0x%08X\n", i_raw);
-
- /* error interrupt */
- if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
- i_err = i2c_r32(err_irqss);
- PRINTK("i_err 0x%08X bus_stat 0x%04X\n",
- i_err, i2c_r32(bus_stat));
-
- /* tx fifo overflow (8) */
- if (i_err & I2C_ERR_IRQSS_TXF_OFL)
- priv->msg_err |= FALCON_I2C_TX_OFL;
-
- /* tx fifo underflow (4) */
- if (i_err & I2C_ERR_IRQSS_TXF_UFL)
- priv->msg_err |= FALCON_I2C_TX_UFL;
-
- /* rx fifo overflow (2) */
- if (i_err & I2C_ERR_IRQSS_RXF_OFL)
- priv->msg_err |= FALCON_I2C_RX_OFL;
-
- /* rx fifo underflow (1) */
- if (i_err & I2C_ERR_IRQSS_RXF_UFL)
- priv->msg_err |= FALCON_I2C_RX_UFL;
-
- i2c_w32(i_err, err_irqsc);
- }
-
- /* protocol interrupt */
- if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
- falcon_i2c_isr_prot(priv);
-
- if ((priv->msg_err) || (priv->status == STATUS_STOP))
- complete(&priv->cmd_complete);
-
- return IRQ_HANDLED;
-}
-
-static u32 falcon_i2c_functionality(struct i2c_adapter *adap)
-{
- return I2C_FUNC_I2C |
- I2C_FUNC_10BIT_ADDR |
- I2C_FUNC_SMBUS_EMUL;
-}
-
-static struct i2c_algorithm falcon_i2c_algorithm = {
- .master_xfer = falcon_i2c_xfer,
- .functionality = falcon_i2c_functionality,
-};
-
-static int __devinit falcon_i2c_probe(struct platform_device *pdev)
-{
- int ret = 0;
- struct falcon_i2c *priv;
- struct i2c_adapter *adap;
- struct resource *mmres, *ioarea,
- *irqres_lb, *irqres_b, *irqres_err, *irqres_p;
- struct clk *clk;
-
- dev_dbg(&pdev->dev, "probing\n");
-
- mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irqres_lb = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
- "i2c_lb");
- irqres_b = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_b");
- irqres_err = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
- "i2c_err");
- irqres_p = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_p");
-
- if (!mmres || !irqres_lb || !irqres_b || !irqres_err || !irqres_p) {
- dev_err(&pdev->dev, "no resources\n");
- return -ENODEV;
- }
-
- clk = clk_get_fpi();
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "failed to get fpi clk\n");
- return -ENOENT;
- }
-
- if (clk_get_rate(clk) != 100000000) {
- dev_err(&pdev->dev, "input clock is not 100MHz\n");
- return -ENOENT;
- }
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "failed to get i2c clk\n");
- return -ENOENT;
- }
- clk_activate(clk);
- /* allocate private data */
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- dev_err(&pdev->dev, "can't allocate private data\n");
- return -ENOMEM;
- }
-
- adap = &priv->adap;
- i2c_set_adapdata(adap, priv);
- adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
- strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
- adap->algo = &falcon_i2c_algorithm;
-
- priv->mode = FALCON_I2C_MODE_100;
- priv->clk = clk;
- priv->dev = &pdev->dev;
-
- init_completion(&priv->cmd_complete);
- mutex_init(&priv->mutex);
-
- if (ltq_gpio_request(&pdev->dev, 107, 0, 0, DRV_NAME":sda") ||
- ltq_gpio_request(&pdev->dev, 108, 0, 0, DRV_NAME":scl"))
- {
- dev_err(&pdev->dev, "I2C gpios not available\n");
- ret = -ENXIO;
- goto err_free_priv;
- }
-
- ioarea = request_mem_region(mmres->start, resource_size(mmres),
- pdev->name);
-
- if (ioarea == NULL) {
- dev_err(&pdev->dev, "I2C region already claimed\n");
- ret = -ENXIO;
- goto err_free_gpio;
- }
-
- /* map memory */
- priv->membase = ioremap_nocache(mmres->start & ~KSEG1,
- resource_size(mmres));
- if (priv->membase == NULL) {
- ret = -ENOMEM;
- goto err_release_region;
- }
-
- priv->irq_lb = irqres_lb->start;
- ret = request_irq(priv->irq_lb, falcon_i2c_isr_burst, IRQF_DISABLED,
- irqres_lb->name, priv);
- if (ret) {
- dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
- irqres_lb->start);
- ret = -ENODEV;
- goto err_unmap_mem;
- }
-
- priv->irq_b = irqres_b->start;
- ret = request_irq(priv->irq_b, falcon_i2c_isr_burst, IRQF_DISABLED,
- irqres_b->name, priv);
- if (ret) {
- dev_err(&pdev->dev, "can't get burst IRQ %d\n",
- irqres_b->start);
- ret = -ENODEV;
- goto err_free_lb_irq;
- }
-
- priv->irq_err = irqres_err->start;
- ret = request_irq(priv->irq_err, falcon_i2c_isr, IRQF_DISABLED,
- irqres_err->name, priv);
- if (ret) {
- dev_err(&pdev->dev, "can't get error IRQ %d\n",
- irqres_err->start);
- ret = -ENODEV;
- goto err_free_b_irq;
- }
-
- priv->irq_p = irqres_p->start;
- ret = request_irq(priv->irq_p, falcon_i2c_isr, IRQF_DISABLED,
- irqres_p->name, priv);
- if (ret) {
- dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
- irqres_p->start);
- ret = -ENODEV;
- goto err_free_err_irq;
- }
-
- dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
- dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres_lb->start,
- irqres_b->start, irqres_err->start, irqres_p->start);
-
- /* add our adapter to the i2c stack */
- ret = i2c_add_numbered_adapter(adap);
- if (ret) {
- dev_err(&pdev->dev, "can't register I2C adapter\n");
- goto err_free_p_irq;
- }
-
- platform_set_drvdata(pdev, priv);
- i2c_set_adapdata(adap, priv);
-
- /* print module version information */
- dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
- (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
- (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
-
- /* initialize HW */
- ret = falcon_i2c_hw_init(adap);
- if (ret) {
- dev_err(&pdev->dev, "can't configure adapter\n");
- goto err_remove_adapter;
- }
-
- dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
-
- return 0;
-
-err_remove_adapter:
- i2c_del_adapter(adap);
- platform_set_drvdata(pdev, NULL);
-
-err_free_p_irq:
- free_irq(priv->irq_p, priv);
-
-err_free_err_irq:
- free_irq(priv->irq_err, priv);
-
-err_free_b_irq:
- free_irq(priv->irq_b, priv);
-
-err_free_lb_irq:
- free_irq(priv->irq_lb, priv);
-
-err_unmap_mem:
- iounmap(priv->membase);
-
-err_release_region:
- release_mem_region(mmres->start, resource_size(mmres));
-
-err_free_gpio:
- gpio_free(108);
- gpio_free(107);
-
-err_free_priv:
- kfree(priv);
-
- return ret;
-}
-
-static int __devexit falcon_i2c_remove(struct platform_device *pdev)
-{
- struct falcon_i2c *priv = platform_get_drvdata(pdev);
- struct resource *mmres;
-
- /* disable bus */
- i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-
- /* remove driver */
- platform_set_drvdata(pdev, NULL);
- i2c_del_adapter(&priv->adap);
-
- free_irq(priv->irq_lb, priv);
- free_irq(priv->irq_b, priv);
- free_irq(priv->irq_err, priv);
- free_irq(priv->irq_p, priv);
-
- iounmap(priv->membase);
-
- gpio_free(108);
- gpio_free(107);
-
- kfree(priv);
-
- mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(mmres->start, resource_size(mmres));
-
- dev_dbg(&pdev->dev, "removed\n");
-
- return 0;
-}
-
-static struct platform_driver falcon_i2c_driver = {
- .probe = falcon_i2c_probe,
- .remove = __devexit_p(falcon_i2c_remove),
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init falcon_i2c_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&falcon_i2c_driver);
-
- if (ret)
- pr_debug(DRV_NAME ": can't register platform driver\n");
-
- return ret;
-}
-
-static void __exit falcon_i2c_exit(void)
-{
- platform_driver_unregister(&falcon_i2c_driver);
-}
-
-module_init(falcon_i2c_init);
-module_exit(falcon_i2c_exit);
-
-MODULE_DESCRIPTION("Lantiq FALC(tm) ON - I2C bus adapter");
-MODULE_ALIAS("platform:" DRV_NAME);
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
diff --git a/target/linux/lantiq/files/drivers/net/ethernet/lantiq_vrx200.c b/target/linux/lantiq/files/drivers/net/ethernet/lantiq_vrx200.c
deleted file mode 100644
index d79d3803cc..0000000000
--- a/target/linux/lantiq/files/drivers/net/ethernet/lantiq_vrx200.c
+++ /dev/null
@@ -1,1358 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/uaccess.h>
-#include <linux/in.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/phy.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/skbuff.h>
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-
-#include <asm/checksum.h>
-
-#include <lantiq_soc.h>
-#include <xway_dma.h>
-#include <lantiq_platform.h>
-
-#define LTQ_SWITCH_BASE 0x1E108000
-#define LTQ_SWITCH_CORE_BASE LTQ_SWITCH_BASE
-#define LTQ_SWITCH_TOP_PDI_BASE LTQ_SWITCH_CORE_BASE
-#define LTQ_SWITCH_BM_PDI_BASE (LTQ_SWITCH_CORE_BASE + 4 * 0x40)
-#define LTQ_SWITCH_MAC_PDI_0_BASE (LTQ_SWITCH_CORE_BASE + 4 * 0x900)
-#define LTQ_SWITCH_MAC_PDI_X_BASE(x) (LTQ_SWITCH_MAC_PDI_0_BASE + x * 0x30)
-#define LTQ_SWITCH_TOPLEVEL_BASE (LTQ_SWITCH_BASE + 4 * 0xC40)
-#define LTQ_SWITCH_MDIO_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE)
-#define LTQ_SWITCH_MII_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x36)
-#define LTQ_SWITCH_PMAC_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x82)
-
-#define LTQ_ETHSW_MAC_CTRL0_PADEN (1 << 8)
-#define LTQ_ETHSW_MAC_CTRL0_FCS (1 << 7)
-#define LTQ_ETHSW_MAC_CTRL1_SHORTPRE (1 << 8)
-#define LTQ_ETHSW_MAC_CTRL2_MLEN (1 << 3)
-#define LTQ_ETHSW_MAC_CTRL2_LCHKL (1 << 2)
-#define LTQ_ETHSW_MAC_CTRL2_LCHKS_DIS 0
-#define LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG 1
-#define LTQ_ETHSW_MAC_CTRL2_LCHKS_TAG 2
-#define LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT 9
-#define LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS (1 << 6)
-#define LTQ_ETHSW_GLOB_CTRL_SE (1 << 15)
-#define LTQ_ETHSW_MDC_CFG1_MCEN (1 << 8)
-#define LTQ_ETHSW_PMAC_HD_CTL_FC (1 << 10)
-#define LTQ_ETHSW_PMAC_HD_CTL_RC (1 << 4)
-#define LTQ_ETHSW_PMAC_HD_CTL_AC (1 << 2)
-#define ADVERTIZE_MPD (1 << 10)
-
-#define MDIO_DEVAD_NONE (-1)
-
-#define LTQ_ETH_RX_BUFFER_CNT PKTBUFSRX
-
-#define LTQ_MDIO_DRV_NAME "ltq-mdio"
-#define LTQ_ETH_DRV_NAME "ltq-eth"
-
-#define LTQ_ETHSW_MAX_GMAC 1
-#define LTQ_ETHSW_PMAC 1
-
-#define ltq_setbits(a, set) \
- ltq_w32(ltq_r32(a) | (set), a)
-
-enum ltq_reset_modules {
- LTQ_RESET_CORE,
- LTQ_RESET_DMA,
- LTQ_RESET_ETH,
- LTQ_RESET_PHY,
- LTQ_RESET_HARD,
- LTQ_RESET_SOFT,
-};
-
-static inline void
-dbg_ltq_writel(void *a, unsigned int b)
-{
- ltq_w32(b, a);
-}
-
-int ltq_reset_once(enum ltq_reset_modules module, ulong usec);
-
-struct ltq_ethsw_mac_pdi_x_regs {
- u32 pstat; /* Port status */
- u32 pisr; /* Interrupt status */
- u32 pier; /* Interrupt enable */
- u32 ctrl_0; /* Control 0 */
- u32 ctrl_1; /* Control 1 */
- u32 ctrl_2; /* Control 2 */
- u32 ctrl_3; /* Control 3 */
- u32 ctrl_4; /* Control 4 */
- u32 ctrl_5; /* Control 5 */
- u32 ctrl_6; /* Control 6 */
- u32 bufst; /* TX/RX buffer control */
- u32 testen; /* Test enable */
-};
-
-struct ltq_ethsw_mac_pdi_regs {
- struct ltq_ethsw_mac_pdi_x_regs mac[12];
-};
-
-struct ltq_ethsw_mdio_pdi_regs {
- u32 glob_ctrl; /* Global control 0 */
- u32 rsvd0[7];
- u32 mdio_ctrl; /* MDIO control */
- u32 mdio_read; /* MDIO read data */
- u32 mdio_write; /* MDIO write data */
- u32 mdc_cfg_0; /* MDC clock configuration 0 */
- u32 mdc_cfg_1; /* MDC clock configuration 1 */
- u32 rsvd[3];
- u32 phy_addr_5; /* PHY address port 5 */
- u32 phy_addr_4; /* PHY address port 4 */
- u32 phy_addr_3; /* PHY address port 3 */
- u32 phy_addr_2; /* PHY address port 2 */
- u32 phy_addr_1; /* PHY address port 1 */
- u32 phy_addr_0; /* PHY address port 0 */
- u32 mdio_stat_0; /* MDIO PHY polling status port 0 */
- u32 mdio_stat_1; /* MDIO PHY polling status port 1 */
- u32 mdio_stat_2; /* MDIO PHY polling status port 2 */
- u32 mdio_stat_3; /* MDIO PHY polling status port 3 */
- u32 mdio_stat_4; /* MDIO PHY polling status port 4 */
- u32 mdio_stat_5; /* MDIO PHY polling status port 5 */
-};
-
-struct ltq_ethsw_mii_pdi_regs {
- u32 mii_cfg0; /* xMII port 0 configuration */
- u32 pcdu0; /* Port 0 clock delay configuration */
- u32 mii_cfg1; /* xMII port 1 configuration */
- u32 pcdu1; /* Port 1 clock delay configuration */
- u32 mii_cfg2; /* xMII port 2 configuration */
- u32 rsvd0;
- u32 mii_cfg3; /* xMII port 3 configuration */
- u32 rsvd1;
- u32 mii_cfg4; /* xMII port 4 configuration */
- u32 rsvd2;
- u32 mii_cfg5; /* xMII port 5 configuration */
- u32 pcdu5; /* Port 5 clock delay configuration */
-};
-
-struct ltq_ethsw_pmac_pdi_regs {
- u32 hd_ctl; /* PMAC header control */
- u32 tl; /* PMAC type/length */
- u32 sa1; /* PMAC source address 1 */
- u32 sa2; /* PMAC source address 2 */
- u32 sa3; /* PMAC source address 3 */
- u32 da1; /* PMAC destination address 1 */
- u32 da2; /* PMAC destination address 2 */
- u32 da3; /* PMAC destination address 3 */
- u32 vlan; /* PMAC VLAN */
- u32 rx_ipg; /* PMAC interpacket gap in RX direction */
- u32 st_etype; /* PMAC special tag ethertype */
- u32 ewan; /* PMAC ethernet WAN group */
-};
-
-struct ltq_mdio_phy_addr_reg {
- union {
- struct {
- unsigned rsvd:1;
- unsigned lnkst:2; /* Link status control */
- unsigned speed:2; /* Speed control */
- unsigned fdup:2; /* Full duplex control */
- unsigned fcontx:2; /* Flow control mode TX */
- unsigned fconrx:2; /* Flow control mode RX */
- unsigned addr:5; /* PHY address */
- } bits;
- u16 val;
- };
-};
-
-enum ltq_mdio_phy_addr_lnkst {
- LTQ_MDIO_PHY_ADDR_LNKST_AUTO = 0,
- LTQ_MDIO_PHY_ADDR_LNKST_UP = 1,
- LTQ_MDIO_PHY_ADDR_LNKST_DOWN = 2,
-};
-
-enum ltq_mdio_phy_addr_speed {
- LTQ_MDIO_PHY_ADDR_SPEED_M10 = 0,
- LTQ_MDIO_PHY_ADDR_SPEED_M100 = 1,
- LTQ_MDIO_PHY_ADDR_SPEED_G1 = 2,
- LTQ_MDIO_PHY_ADDR_SPEED_AUTO = 3,
-};
-
-enum ltq_mdio_phy_addr_fdup {
- LTQ_MDIO_PHY_ADDR_FDUP_AUTO = 0,
- LTQ_MDIO_PHY_ADDR_FDUP_ENABLE = 1,
- LTQ_MDIO_PHY_ADDR_FDUP_DISABLE = 3,
-};
-
-enum ltq_mdio_phy_addr_fcon {
- LTQ_MDIO_PHY_ADDR_FCON_AUTO = 0,
- LTQ_MDIO_PHY_ADDR_FCON_ENABLE = 1,
- LTQ_MDIO_PHY_ADDR_FCON_DISABLE = 3,
-};
-
-struct ltq_mii_mii_cfg_reg {
- union {
- struct {
- unsigned res:1; /* Hardware reset */
- unsigned en:1; /* xMII interface enable */
- unsigned isol:1; /* xMII interface isolate */
- unsigned ldclkdis:1; /* Link down clock disable */
- unsigned rsvd:1;
- unsigned crs:2; /* CRS sensitivity config */
- unsigned rgmii_ibs:1; /* RGMII In Band status */
- unsigned rmii:1; /* RMII ref clock direction */
- unsigned miirate:3; /* xMII interface clock rate */
- unsigned miimode:4; /* xMII interface mode */
- } bits;
- u16 val;
- };
-};
-
-enum ltq_mii_mii_cfg_miirate {
- LTQ_MII_MII_CFG_MIIRATE_M2P5 = 0,
- LTQ_MII_MII_CFG_MIIRATE_M25 = 1,
- LTQ_MII_MII_CFG_MIIRATE_M125 = 2,
- LTQ_MII_MII_CFG_MIIRATE_M50 = 3,
- LTQ_MII_MII_CFG_MIIRATE_AUTO = 4,
-};
-
-enum ltq_mii_mii_cfg_miimode {
- LTQ_MII_MII_CFG_MIIMODE_MIIP = 0,
- LTQ_MII_MII_CFG_MIIMODE_MIIM = 1,
- LTQ_MII_MII_CFG_MIIMODE_RMIIP = 2,
- LTQ_MII_MII_CFG_MIIMODE_RMIIM = 3,
- LTQ_MII_MII_CFG_MIIMODE_RGMII = 4,
-};
-
-struct ltq_eth_priv {
- struct ltq_dma_device *dma_dev;
- struct mii_dev *bus;
- struct eth_device *dev;
- struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC];
- int rx_num;
-};
-
-enum ltq_mdio_mbusy {
- LTQ_MDIO_MBUSY_IDLE = 0,
- LTQ_MDIO_MBUSY_BUSY = 1,
-};
-
-enum ltq_mdio_op {
- LTQ_MDIO_OP_WRITE = 1,
- LTQ_MDIO_OP_READ = 2,
-};
-
-struct ltq_mdio_access {
- union {
- struct {
- unsigned rsvd:3;
- unsigned mbusy:1;
- unsigned op:2;
- unsigned phyad:5;
- unsigned regad:5;
- } bits;
- u16 val;
- };
-};
-
-enum LTQ_ETH_PORT_FLAGS {
- LTQ_ETH_PORT_NONE = 0,
- LTQ_ETH_PORT_PHY = 1,
- LTQ_ETH_PORT_SWITCH = (1 << 1),
- LTQ_ETH_PORT_MAC = (1 << 2),
-};
-
-struct ltq_eth_port_config {
- u8 num;
- u8 phy_addr;
- u16 flags;
- phy_interface_t phy_if;
-};
-
-struct ltq_eth_board_config {
- const struct ltq_eth_port_config *ports;
- int num_ports;
-};
-
-static const struct ltq_eth_port_config eth_port_config[] = {
- /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
- { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
- /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
- { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-};
-
-static const struct ltq_eth_board_config board_config = {
- .ports = eth_port_config,
- .num_ports = ARRAY_SIZE(eth_port_config),
-};
-
-static struct ltq_ethsw_mac_pdi_regs *ltq_ethsw_mac_pdi_regs =
- (struct ltq_ethsw_mac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MAC_PDI_0_BASE);
-
-static struct ltq_ethsw_mdio_pdi_regs *ltq_ethsw_mdio_pdi_regs =
- (struct ltq_ethsw_mdio_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MDIO_PDI_BASE);
-
-static struct ltq_ethsw_mii_pdi_regs *ltq_ethsw_mii_pdi_regs =
- (struct ltq_ethsw_mii_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MII_PDI_BASE);
-
-static struct ltq_ethsw_pmac_pdi_regs *ltq_ethsw_pmac_pdi_regs =
- (struct ltq_ethsw_pmac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_PMAC_PDI_BASE);
-
-
-#define MAX_DMA_CHAN 0x8
-#define MAX_DMA_CRC_LEN 0x4
-#define MAX_DMA_DATA_LEN 0x600
-
-/* use 2 static channels for TX/RX
- depending on the SoC we need to use different DMA channels for ethernet */
-#define LTQ_ETOP_TX_CHANNEL 1
-#define LTQ_ETOP_RX_CHANNEL 0
-
-#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
-#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
-
-#define DRV_VERSION "1.0"
-
-static void __iomem *ltq_vrx200_membase;
-
-struct ltq_vrx200_chan {
- int idx;
- int tx_free;
- struct net_device *netdev;
- struct napi_struct napi;
- struct ltq_dma_channel dma;
- struct sk_buff *skb[LTQ_DESC_NUM];
-};
-
-struct ltq_vrx200_priv {
- struct net_device *netdev;
- struct ltq_eth_data *pldata;
- struct resource *res;
-
- struct mii_bus *mii_bus;
- struct phy_device *phydev;
-
- struct ltq_vrx200_chan ch[MAX_DMA_CHAN];
- int tx_free[MAX_DMA_CHAN >> 1];
-
- spinlock_t lock;
-
- struct clk *clk_ppe;
-};
-
-static int ltq_vrx200_mdio_wr(struct mii_bus *bus, int phy_addr,
- int phy_reg, u16 phy_data);
-
-static int
-ltq_vrx200_alloc_skb(struct ltq_vrx200_chan *ch)
-{
- ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
- if (!ch->skb[ch->dma.desc])
- return -ENOMEM;
- ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
- ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
- DMA_FROM_DEVICE);
- ch->dma.desc_base[ch->dma.desc].addr =
- CPHYSADDR(ch->skb[ch->dma.desc]->data);
- ch->dma.desc_base[ch->dma.desc].ctl =
- LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
- MAX_DMA_DATA_LEN;
- skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
- return 0;
-}
-
-static void
-ltq_vrx200_hw_receive(struct ltq_vrx200_chan *ch)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
- struct sk_buff *skb = ch->skb[ch->dma.desc];
- int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - MAX_DMA_CRC_LEN;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- if (ltq_vrx200_alloc_skb(ch)) {
- netdev_err(ch->netdev,
- "failed to allocate new rx buffer, stopping DMA\n");
- ltq_dma_close(&ch->dma);
- }
- ch->dma.desc++;
- ch->dma.desc %= LTQ_DESC_NUM;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- skb_put(skb, len);
- skb->dev = ch->netdev;
- skb->protocol = eth_type_trans(skb, ch->netdev);
- netif_receive_skb(skb);
-}
-
-static int
-ltq_vrx200_poll_rx(struct napi_struct *napi, int budget)
-{
- struct ltq_vrx200_chan *ch = container_of(napi,
- struct ltq_vrx200_chan, napi);
- struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
- int rx = 0;
- int complete = 0;
- unsigned long flags;
-
- while ((rx < budget) && !complete) {
- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-
- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
- ltq_vrx200_hw_receive(ch);
- rx++;
- } else {
- complete = 1;
- }
- }
- if (complete || !rx) {
- napi_complete(&ch->napi);
- spin_lock_irqsave(&priv->lock, flags);
- ltq_dma_ack_irq(&ch->dma);
- spin_unlock_irqrestore(&priv->lock, flags);
- }
- return rx;
-}
-
-static int
-ltq_vrx200_poll_tx(struct napi_struct *napi, int budget)
-{
- struct ltq_vrx200_chan *ch =
- container_of(napi, struct ltq_vrx200_chan, napi);
- struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
- struct netdev_queue *txq =
- netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
- while ((ch->dma.desc_base[ch->tx_free].ctl &
- (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
- dev_kfree_skb_any(ch->skb[ch->tx_free]);
- ch->skb[ch->tx_free] = NULL;
- memset(&ch->dma.desc_base[ch->tx_free], 0,
- sizeof(struct ltq_dma_desc));
- ch->tx_free++;
- ch->tx_free %= LTQ_DESC_NUM;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (netif_tx_queue_stopped(txq))
- netif_tx_start_queue(txq);
- napi_complete(&ch->napi);
- spin_lock_irqsave(&priv->lock, flags);
- ltq_dma_ack_irq(&ch->dma);
- spin_unlock_irqrestore(&priv->lock, flags);
- return 1;
-}
-
-static irqreturn_t
-ltq_vrx200_dma_irq(int irq, void *_priv)
-{
- struct ltq_vrx200_priv *priv = _priv;
- int ch = irq - LTQ_DMA_ETOP;
-
- napi_schedule(&priv->ch[ch].napi);
- return IRQ_HANDLED;
-}
-
-static void
-ltq_vrx200_free_channel(struct net_device *dev, struct ltq_vrx200_chan *ch)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
-
- ltq_dma_free(&ch->dma);
- if (ch->dma.irq)
- free_irq(ch->dma.irq, priv);
- if (IS_RX(ch->idx)) {
- int desc;
- for (desc = 0; desc < LTQ_DESC_NUM; desc++)
- dev_kfree_skb_any(ch->skb[ch->dma.desc]);
- }
-}
-
-static void
-ltq_vrx200_hw_exit(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
- int i;
-
- clk_disable(priv->clk_ppe);
-
- for (i = 0; i < MAX_DMA_CHAN; i++)
- if (IS_TX(i) || IS_RX(i))
- ltq_vrx200_free_channel(dev, &priv->ch[i]);
-}
-
-static void *ltq_eth_phy_addr_reg(int num)
-{
- switch (num) {
- case 0:
- return &ltq_ethsw_mdio_pdi_regs->phy_addr_0;
- case 1:
- return &ltq_ethsw_mdio_pdi_regs->phy_addr_1;
- case 2:
- return &ltq_ethsw_mdio_pdi_regs->phy_addr_2;
- case 3:
- return &ltq_ethsw_mdio_pdi_regs->phy_addr_3;
- case 4:
- return &ltq_ethsw_mdio_pdi_regs->phy_addr_4;
- case 5:
- return &ltq_ethsw_mdio_pdi_regs->phy_addr_5;
- }
-
- return NULL;
-}
-
-static void *ltq_eth_mii_cfg_reg(int num)
-{
- switch (num) {
- case 0:
- return &ltq_ethsw_mii_pdi_regs->mii_cfg0;
- case 1:
- return &ltq_ethsw_mii_pdi_regs->mii_cfg1;
- case 2:
- return &ltq_ethsw_mii_pdi_regs->mii_cfg2;
- case 3:
- return &ltq_ethsw_mii_pdi_regs->mii_cfg3;
- case 4:
- return &ltq_ethsw_mii_pdi_regs->mii_cfg4;
- case 5:
- return &ltq_ethsw_mii_pdi_regs->mii_cfg5;
- }
-
- return NULL;
-}
-
-static void ltq_eth_gmac_update(struct phy_device *phydev, int num)
-{
- struct ltq_mdio_phy_addr_reg phy_addr_reg;
- struct ltq_mii_mii_cfg_reg mii_cfg_reg;
- void *phy_addr = ltq_eth_phy_addr_reg(num);
- void *mii_cfg = ltq_eth_mii_cfg_reg(num);
-
- phy_addr_reg.val = ltq_r32(phy_addr);
- mii_cfg_reg.val = ltq_r32(mii_cfg);
-
- phy_addr_reg.bits.addr = phydev->addr;
-
- if (phydev->link)
- phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_UP;
- else
- phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
-
- switch (phydev->speed) {
- case SPEED_1000:
- phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_G1;
- mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M125;
- break;
- case SPEED_100:
- phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M100;
- switch (mii_cfg_reg.bits.miimode) {
- case LTQ_MII_MII_CFG_MIIMODE_RMIIM:
- case LTQ_MII_MII_CFG_MIIMODE_RMIIP:
- mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M50;
- break;
- default:
- mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M25;
- break;
- }
- break;
- default:
- phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
- mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
- break;
- }
-
- if (phydev->duplex == DUPLEX_FULL)
- phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_ENABLE;
- else
- phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
-
- dbg_ltq_writel(phy_addr, phy_addr_reg.val);
- dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
- udelay(1);
-}
-
-
-static void ltq_eth_port_config(struct ltq_vrx200_priv *priv,
- const struct ltq_eth_port_config *port)
-{
- struct ltq_mii_mii_cfg_reg mii_cfg_reg;
- void *mii_cfg = ltq_eth_mii_cfg_reg(port->num);
- int setup_gpio = 0;
-
- mii_cfg_reg.val = ltq_r32(mii_cfg);
-
-
- switch (port->num) {
- case 0: /* xMII0 */
- case 1: /* xMII1 */
- switch (port->phy_if) {
- case PHY_INTERFACE_MODE_MII:
- if (port->flags & LTQ_ETH_PORT_PHY)
- /* MII MAC mode, connected to external PHY */
- mii_cfg_reg.bits.miimode =
- LTQ_MII_MII_CFG_MIIMODE_MIIM;
- else
- /* MII PHY mode, connected to external MAC */
- mii_cfg_reg.bits.miimode =
- LTQ_MII_MII_CFG_MIIMODE_MIIP;
- setup_gpio = 1;
- break;
- case PHY_INTERFACE_MODE_RMII:
- if (port->flags & LTQ_ETH_PORT_PHY)
- /* RMII MAC mode, connected to external PHY */
- mii_cfg_reg.bits.miimode =
- LTQ_MII_MII_CFG_MIIMODE_RMIIM;
- else
- /* RMII PHY mode, connected to external MAC */
- mii_cfg_reg.bits.miimode =
- LTQ_MII_MII_CFG_MIIMODE_RMIIP;
- setup_gpio = 1;
- break;
- case PHY_INTERFACE_MODE_RGMII:
- /* RGMII MAC mode, connected to external PHY */
- mii_cfg_reg.bits.miimode =
- LTQ_MII_MII_CFG_MIIMODE_RGMII;
- setup_gpio = 1;
- break;
- default:
- break;
- }
- break;
- case 2: /* internal GPHY0 */
- case 3: /* internal GPHY0 */
- case 4: /* internal GPHY1 */
- switch (port->phy_if) {
- case PHY_INTERFACE_MODE_MII:
- case PHY_INTERFACE_MODE_GMII:
- /* MII MAC mode, connected to internal GPHY */
- mii_cfg_reg.bits.miimode =
- LTQ_MII_MII_CFG_MIIMODE_MIIM;
- setup_gpio = 1;
- break;
- default:
- break;
- }
- break;
- case 5: /* internal GPHY1 or xMII2 */
- switch (port->phy_if) {
- case PHY_INTERFACE_MODE_MII:
- /* MII MAC mode, connected to internal GPHY */
- mii_cfg_reg.bits.miimode =
- LTQ_MII_MII_CFG_MIIMODE_MIIM;
- setup_gpio = 1;
- break;
- case PHY_INTERFACE_MODE_RGMII:
- /* RGMII MAC mode, connected to external PHY */
- mii_cfg_reg.bits.miimode =
- LTQ_MII_MII_CFG_MIIMODE_RGMII;
- setup_gpio = 1;
- break;
- default:
- break;
- }
- break;
- default:
- break;
- }
-
- /* Enable MII interface */
- mii_cfg_reg.bits.en = port->flags ? 1 : 0;
- dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
-
-}
-
-static void ltq_eth_gmac_init(int num)
-{
- struct ltq_mdio_phy_addr_reg phy_addr_reg;
- struct ltq_mii_mii_cfg_reg mii_cfg_reg;
- void *phy_addr = ltq_eth_phy_addr_reg(num);
- void *mii_cfg = ltq_eth_mii_cfg_reg(num);
- struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs;
-
- mac_pdi_regs = &ltq_ethsw_mac_pdi_regs->mac[num];
-
- /* Reset PHY status to link down */
- phy_addr_reg.val = ltq_r32(phy_addr);
- phy_addr_reg.bits.addr = num;
- phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
- phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
- phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
- dbg_ltq_writel(phy_addr, phy_addr_reg.val);
-
- /* Reset and disable MII interface */
- mii_cfg_reg.val = ltq_r32(mii_cfg);
- mii_cfg_reg.bits.en = 0;
- mii_cfg_reg.bits.res = 1;
- mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
- dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
-
- /*
- * Enable padding of short frames, enable frame checksum generation
- * in transmit direction
- */
- dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN |
- LTQ_ETHSW_MAC_CTRL0_FCS);
-
- /* Set inter packet gap size to 12 bytes */
- dbg_ltq_writel(&mac_pdi_regs->ctrl_1, 12);
-
- /*
- * Configure frame length checks:
- * - allow jumbo frames
- * - enable long length check
- * - enable short length without VLAN tags
- */
- dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN |
- LTQ_ETHSW_MAC_CTRL2_LCHKL |
- LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG);
-}
-
-
-static void ltq_eth_pmac_init(void)
-{
- struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs;
-
- mac_pdi_regs = &ltq_ethsw_mac_pdi_regs->mac[LTQ_ETHSW_PMAC];
-
- /*
- * Enable padding of short frames, enable frame checksum generation
- * in transmit direction
- */
- dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN |
- LTQ_ETHSW_MAC_CTRL0_FCS);
-
- /*
- * Configure frame length checks:
- * - allow jumbo frames
- * - enable long length check
- * - enable short length without VLAN tags
- */
- dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN |
- LTQ_ETHSW_MAC_CTRL2_LCHKL |
- LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG);
-
- /*
- * Apply workaround for buffer congestion:
- * - shorten preambel to 1 byte
- * - set minimum inter packet gap size to 7 bytes
- * - enable receive buffer bypass mode
- */
- dbg_ltq_writel(&mac_pdi_regs->ctrl_1, LTQ_ETHSW_MAC_CTRL1_SHORTPRE | 7);
- dbg_ltq_writel(&mac_pdi_regs->ctrl_6,
- (6 << LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT) |
- LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS);
-
- /* Set request assertion threshold to 8, IPG counter to 11 */
- dbg_ltq_writel(&ltq_ethsw_pmac_pdi_regs->rx_ipg, 0x8B);
-
- /*
- * Configure frame header control:
- * - enable reaction on pause frames (flow control)
- * - remove CRC for packets from PMAC to DMA
- * - add CRC for packets from DMA to PMAC
- */
- dbg_ltq_writel(&ltq_ethsw_pmac_pdi_regs->hd_ctl, LTQ_ETHSW_PMAC_HD_CTL_FC |
- /*LTQ_ETHSW_PMAC_HD_CTL_RC | */LTQ_ETHSW_PMAC_HD_CTL_AC);
-}
-
-static int
-ltq_vrx200_hw_init(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
- int err = 0;
- int i;
-
- netdev_info(dev, "setting up dma\n");
- ltq_dma_init_port(DMA_PORT_ETOP);
-
- netdev_info(dev, "setting up pmu\n");
- clk_enable(priv->clk_ppe);
-
- /* Reset ethernet and switch subsystems */
- netdev_info(dev, "reset core\n");
- ltq_reset_once(BIT(8), 10);
-
- /* Enable switch macro */
- ltq_setbits(&ltq_ethsw_mdio_pdi_regs->glob_ctrl,
- LTQ_ETHSW_GLOB_CTRL_SE);
-
- /* Disable MDIO auto-polling for all ports */
- dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdc_cfg_0, 0);
-
- /*
- * Enable and set MDIO management clock to 2.5 MHz. This is the
- * maximum clock for FE PHYs.
- * Formula for clock is:
- *
- * 50 MHz
- * x = ----------- - 1
- * 2 * f_MDC
- */
- dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdc_cfg_1,
- LTQ_ETHSW_MDC_CFG1_MCEN | 9);
-
- /* Init MAC connected to CPU */
- ltq_eth_pmac_init();
-
- /* Init MACs connected to external MII interfaces */
- for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++)
- ltq_eth_gmac_init(i);
-
- for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
- int irq = LTQ_DMA_ETOP + i;
- struct ltq_vrx200_chan *ch = &priv->ch[i];
-
- ch->idx = ch->dma.nr = i;
-
- if (IS_TX(i)) {
- ltq_dma_alloc_tx(&ch->dma);
- err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED,
- "vrx200_tx", priv);
- } else if (IS_RX(i)) {
- ltq_dma_alloc_rx(&ch->dma);
- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
- ch->dma.desc++)
- if (ltq_vrx200_alloc_skb(ch))
- err = -ENOMEM;
- ch->dma.desc = 0;
- err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED,
- "vrx200_rx", priv);
- }
- if (!err)
- ch->dma.irq = irq;
- }
- for (i = 0; i < board_config.num_ports; i++)
- ltq_eth_port_config(priv, &board_config.ports[i]);
- return err;
-}
-
-static void
-ltq_vrx200_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
- strcpy(info->driver, "Lantiq ETOP");
- strcpy(info->bus_info, "internal");
- strcpy(info->version, DRV_VERSION);
-}
-
-static int
-ltq_vrx200_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
-
- return phy_ethtool_gset(priv->phydev, cmd);
-}
-
-static int
-ltq_vrx200_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
-
- return phy_ethtool_sset(priv->phydev, cmd);
-}
-
-static int
-ltq_vrx200_nway_reset(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
-
- return phy_start_aneg(priv->phydev);
-}
-
-static const struct ethtool_ops ltq_vrx200_ethtool_ops = {
- .get_drvinfo = ltq_vrx200_get_drvinfo,
- .get_settings = ltq_vrx200_get_settings,
- .set_settings = ltq_vrx200_set_settings,
- .nway_reset = ltq_vrx200_nway_reset,
-};
-
-static inline int ltq_mdio_poll(struct mii_bus *bus)
-{
- struct ltq_mdio_access acc;
- unsigned cnt = 10000;
-
- while (likely(cnt--)) {
- acc.val = ltq_r32(&ltq_ethsw_mdio_pdi_regs->mdio_ctrl);
- if (!acc.bits.mbusy)
- return 0;
- }
-
- return 1;
-}
-
-static int
-ltq_vrx200_mdio_wr(struct mii_bus *bus, int addr, int regnum, u16 val)
-{
- struct ltq_mdio_access acc;
- int ret;
-
- acc.val = 0;
- acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY;
- acc.bits.op = LTQ_MDIO_OP_WRITE;
- acc.bits.phyad = addr;
- acc.bits.regad = regnum;
-
- ret = ltq_mdio_poll(bus);
- if (ret)
- return ret;
-
- dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdio_write, val);
- dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val);
-
- return 0;
-}
-
-static int
-ltq_vrx200_mdio_rd(struct mii_bus *bus, int addr, int regnum)
-{
- struct ltq_mdio_access acc;
- int ret;
-
- acc.val = 0;
- acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY;
- acc.bits.op = LTQ_MDIO_OP_READ;
- acc.bits.phyad = addr;
- acc.bits.regad = regnum;
-
- ret = ltq_mdio_poll(bus);
- if (ret)
- goto timeout;
-
- dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val);
-
- ret = ltq_mdio_poll(bus);
- if (ret)
- goto timeout;
-
- ret = ltq_r32(&ltq_ethsw_mdio_pdi_regs->mdio_read);
-
- return ret;
-timeout:
- return -1;
-}
-
-static void
-ltq_vrx200_mdio_link(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
- ltq_eth_gmac_update(priv->phydev, 0);
-}
-
-static int
-ltq_vrx200_mdio_probe(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = NULL;
- int val;
-
- phydev = priv->mii_bus->phy_map[0];
-
- if (!phydev) {
- netdev_err(dev, "no PHY found\n");
- return -ENODEV;
- }
-
- phydev = phy_connect(dev, dev_name(&phydev->dev), &ltq_vrx200_mdio_link,
- 0, 0);
-
- if (IS_ERR(phydev)) {
- netdev_err(dev, "Could not attach to PHY\n");
- return PTR_ERR(phydev);
- }
-
- phydev->supported &= (SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
- | SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full
- | SUPPORTED_1000baseT_Half
- | SUPPORTED_1000baseT_Full
- | SUPPORTED_Autoneg
- | SUPPORTED_MII
- | SUPPORTED_TP);
- phydev->advertising = phydev->supported;
- priv->phydev = phydev;
-
- pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
- dev->name, phydev->drv->name,
- dev_name(&phydev->dev), phydev->irq);
-
- val = ltq_vrx200_mdio_rd(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
- val |= ADVERTIZE_MPD;
- ltq_vrx200_mdio_wr(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
- ltq_vrx200_mdio_wr(priv->mii_bus, 0, 0, 0x1040);
-
- phy_start_aneg(phydev);
-
- return 0;
-}
-
-static int
-ltq_vrx200_mdio_init(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
- int i;
- int err;
-
- priv->mii_bus = mdiobus_alloc();
- if (!priv->mii_bus) {
- netdev_err(dev, "failed to allocate mii bus\n");
- err = -ENOMEM;
- goto err_out;
- }
-
- priv->mii_bus->priv = dev;
- priv->mii_bus->read = ltq_vrx200_mdio_rd;
- priv->mii_bus->write = ltq_vrx200_mdio_wr;
- priv->mii_bus->name = "ltq_mii";
- snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
- priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
- if (!priv->mii_bus->irq) {
- err = -ENOMEM;
- goto err_out_free_mdiobus;
- }
-
- for (i = 0; i < PHY_MAX_ADDR; ++i)
- priv->mii_bus->irq[i] = PHY_POLL;
-
- if (mdiobus_register(priv->mii_bus)) {
- err = -ENXIO;
- goto err_out_free_mdio_irq;
- }
-
- if (ltq_vrx200_mdio_probe(dev)) {
- err = -ENXIO;
- goto err_out_unregister_bus;
- }
- return 0;
-
-err_out_unregister_bus:
- mdiobus_unregister(priv->mii_bus);
-err_out_free_mdio_irq:
- kfree(priv->mii_bus->irq);
-err_out_free_mdiobus:
- mdiobus_free(priv->mii_bus);
-err_out:
- return err;
-}
-
-static void
-ltq_vrx200_mdio_cleanup(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
-
- phy_disconnect(priv->phydev);
- mdiobus_unregister(priv->mii_bus);
- kfree(priv->mii_bus->irq);
- mdiobus_free(priv->mii_bus);
-}
-
-void phy_dump(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
- int i;
- for (i = 0; i < 0x1F; i++) {
- unsigned int val = ltq_vrx200_mdio_rd(priv->mii_bus, 0, i);
- printk("%d %4X\n", i, val);
- }
-}
-
-static int
-ltq_vrx200_open(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
- int i;
- unsigned long flags;
-
- for (i = 0; i < MAX_DMA_CHAN; i++) {
- struct ltq_vrx200_chan *ch = &priv->ch[i];
-
- if (!IS_TX(i) && (!IS_RX(i)))
- continue;
- napi_enable(&ch->napi);
- spin_lock_irqsave(&priv->lock, flags);
- ltq_dma_open(&ch->dma);
- spin_unlock_irqrestore(&priv->lock, flags);
- }
- if (priv->phydev) {
- phy_start(priv->phydev);
- phy_dump(dev);
- }
- netif_tx_start_all_queues(dev);
- return 0;
-}
-
-static int
-ltq_vrx200_stop(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
- int i;
- unsigned long flags;
-
- netif_tx_stop_all_queues(dev);
- if (priv->phydev)
- phy_stop(priv->phydev);
- for (i = 0; i < MAX_DMA_CHAN; i++) {
- struct ltq_vrx200_chan *ch = &priv->ch[i];
-
- if (!IS_RX(i) && !IS_TX(i))
- continue;
- napi_disable(&ch->napi);
- spin_lock_irqsave(&priv->lock, flags);
- ltq_dma_close(&ch->dma);
- spin_unlock_irqrestore(&priv->lock, flags);
- }
- return 0;
-}
-
-static int
-ltq_vrx200_tx(struct sk_buff *skb, struct net_device *dev)
-{
- int queue = skb_get_queue_mapping(skb);
- struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
- struct ltq_vrx200_chan *ch = &priv->ch[(queue << 1) | 1];
- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
- unsigned long flags;
- u32 byte_offset;
- int len;
-
- len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-
- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
- netdev_err(dev, "tx ring full\n");
- netif_tx_stop_queue(txq);
- return NETDEV_TX_BUSY;
- }
-
- /* dma needs to start on a 16 byte aligned address */
- byte_offset = CPHYSADDR(skb->data) % 16;
- ch->skb[ch->dma.desc] = skb;
-
- dev->trans_start = jiffies;
-
- spin_lock_irqsave(&priv->lock, flags);
- desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
- DMA_TO_DEVICE)) - byte_offset;
- wmb();
- desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
- LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
- ch->dma.desc++;
- ch->dma.desc %= LTQ_DESC_NUM;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
- netif_tx_stop_queue(txq);
-
- return NETDEV_TX_OK;
-}
-
-static int
-ltq_vrx200_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
-
- /* TODO: mii-toll reports "No MII transceiver present!." ?!*/
- return phy_mii_ioctl(priv->phydev, rq, cmd);
-}
-
-static u16
-ltq_vrx200_select_queue(struct net_device *dev, struct sk_buff *skb)
-{
- /* we are currently only using the first queue */
- return 0;
-}
-
-static int
-ltq_vrx200_init(struct net_device *dev)
-{
- struct ltq_vrx200_priv *priv = netdev_priv(dev);
- struct sockaddr mac;
- int err;
-
- ether_setup(dev);
- dev->watchdog_timeo = 10 * HZ;
-
- err = ltq_vrx200_hw_init(dev);
- if (err)
- goto err_hw;
-
- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
- if (!is_valid_ether_addr(mac.sa_data)) {
- pr_warn("vrx200: invalid MAC, using random\n");
- random_ether_addr(mac.sa_data);
- }
- eth_mac_addr(dev, &mac);
-
- if (!ltq_vrx200_mdio_init(dev))
- dev->ethtool_ops = &ltq_vrx200_ethtool_ops;
- else
- pr_warn("vrx200: mdio probe failed\n");;
- return 0;
-
-err_hw:
- ltq_vrx200_hw_exit(dev);
- return err;
-}
-
-static void
-ltq_vrx200_tx_timeout(struct net_device *dev)
-{
- int err;
-
- ltq_vrx200_hw_exit(dev);
- err = ltq_vrx200_hw_init(dev);
- if (err)
- goto err_hw;
- dev->trans_start = jiffies;
- netif_wake_queue(dev);
- return;
-
-err_hw:
- ltq_vrx200_hw_exit(dev);
- netdev_err(dev, "failed to restart vrx200 after TX timeout\n");
-}
-
-static const struct net_device_ops ltq_eth_netdev_ops = {
- .ndo_open = ltq_vrx200_open,
- .ndo_stop = ltq_vrx200_stop,
- .ndo_start_xmit = ltq_vrx200_tx,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_do_ioctl = ltq_vrx200_ioctl,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_select_queue = ltq_vrx200_select_queue,
- .ndo_init = ltq_vrx200_init,
- .ndo_tx_timeout = ltq_vrx200_tx_timeout,
-};
-
-static int __devinit
-ltq_vrx200_probe(struct platform_device *pdev)
-{
- struct net_device *dev;
- struct ltq_vrx200_priv *priv;
- struct resource *res;
- int err;
- int i;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "failed to get vrx200 resource\n");
- err = -ENOENT;
- goto err_out;
- }
-
- res = devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), dev_name(&pdev->dev));
- if (!res) {
- dev_err(&pdev->dev, "failed to request vrx200 resource\n");
- err = -EBUSY;
- goto err_out;
- }
-
- ltq_vrx200_membase = devm_ioremap_nocache(&pdev->dev,
- res->start, resource_size(res));
- if (!ltq_vrx200_membase) {
- dev_err(&pdev->dev, "failed to remap vrx200 engine %d\n",
- pdev->id);
- err = -ENOMEM;
- goto err_out;
- }
-
- if (ltq_gpio_request(&pdev->dev, 42, 2, 1, "MDIO") ||
- ltq_gpio_request(&pdev->dev, 43, 2, 1, "MDC")) {
- dev_err(&pdev->dev, "failed to request MDIO gpios\n");
- err = -EBUSY;
- goto err_out;
- }
-
- dev = alloc_etherdev_mq(sizeof(struct ltq_vrx200_priv), 4);
- strcpy(dev->name, "eth%d");
- dev->netdev_ops = &ltq_eth_netdev_ops;
- priv = netdev_priv(dev);
- priv->res = res;
- priv->pldata = dev_get_platdata(&pdev->dev);
- priv->netdev = dev;
-
- priv->clk_ppe = clk_get(&pdev->dev, NULL);
- if (IS_ERR(priv->clk_ppe))
- return PTR_ERR(priv->clk_ppe);
-
- spin_lock_init(&priv->lock);
-
- for (i = 0; i < MAX_DMA_CHAN; i++) {
- if (IS_TX(i))
- netif_napi_add(dev, &priv->ch[i].napi,
- ltq_vrx200_poll_tx, 8);
- else if (IS_RX(i))
- netif_napi_add(dev, &priv->ch[i].napi,
- ltq_vrx200_poll_rx, 32);
- priv->ch[i].netdev = dev;
- }
-
- err = register_netdev(dev);
- if (err)
- goto err_free;
-
- platform_set_drvdata(pdev, dev);
- return 0;
-
-err_free:
- kfree(dev);
-err_out:
- return err;
-}
-
-static int __devexit
-ltq_vrx200_remove(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
-
- if (dev) {
- netif_tx_stop_all_queues(dev);
- ltq_vrx200_hw_exit(dev);
- ltq_vrx200_mdio_cleanup(dev);
- unregister_netdev(dev);
- }
- return 0;
-}
-
-static struct platform_driver ltq_mii_driver = {
- .probe = ltq_vrx200_probe,
- .remove = __devexit_p(ltq_vrx200_remove),
- .driver = {
- .name = "ltq_vrx200",
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(ltq_mii_driver);
-
-MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-MODULE_DESCRIPTION("Lantiq SoC ETOP");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/files/drivers/net/ethernet/svip_eth.c b/target/linux/lantiq/files/drivers/net/ethernet/svip_eth.c
deleted file mode 100644
index 1e25795a2a..0000000000
--- a/target/linux/lantiq/files/drivers/net/ethernet/svip_eth.c
+++ /dev/null
@@ -1,636 +0,0 @@
-/************************************************************************
- *
- * Copyright (c) 2005
- * Infineon Technologies AG
- * St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- ************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/uaccess.h>
-#include <linux/in.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/skbuff.h>
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <asm/checksum.h>
-
-#if 1 /** TODO: MOVE TO APPROPRIATE PLACE */
-
-#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600
-#define REV_MII_MODE 2
-
-#endif
-
-#define DRV_NAME "ifxmips_mii0"
-
-#include <lantiq_soc.h>
-#include <svip_dma.h>
-
-#ifdef CONFIG_DEBUG_MINI_BOOT
-#define IKOS_MINI_BOOT
-#endif
-
-/* debugging */
-#undef INCAIP2_SW_DUMP
-
-#define INCAIP2_SW_EMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args)
-
-#define INCAIP2_SW_CHIP_NO 1
-#define INCAIP2_SW_CHIP_ID 0
-#define INCAIP2_SW_DEVICE_NO 1
-
-#ifdef INCAIP2_SW_DEBUG_MSG
-#define INCAIP2_SW_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args)
-#else
-#define INCAIP2_SW_DMSG(fmt,args...)
-#endif
-
-/************************** Module Parameters *****************************/
-static char *mode = "bridge";
-module_param(mode, charp, 0000);
-MODULE_PARM_DESC(mode, "<description>");
-
-#ifdef HAVE_TX_TIMEOUT
-static int timeout = 10*HZ;
-module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Transmission watchdog timeout in seconds>");
-#endif
-
-#ifdef IKOS_MINI_BOOT
-#ifdef CONFIG_INCAIP2
-extern s32 incaip2_sw_to_mbx(struct sk_buff* skb);
-#endif
-extern s32 svip_sw_to_mbx(struct sk_buff* skb);
-#endif
-
-struct svip_mii_priv {
- struct net_device_stats stats;
- struct dma_device_info *dma_device;
- struct sk_buff *skb;
-};
-
-static struct net_device *svip_mii0_dev;
-static unsigned char mac_addr[MAX_ADDR_LEN];
-static unsigned char my_ethaddr[MAX_ADDR_LEN];
-
-/**
- * Initialize MAC address.
- * This function copies the ethernet address from kernel command line.
- *
- * \param line Pointer to parameter
- * \return 0 OK
- * \ingroup Internal
- */
-static int __init svip_eth_ethaddr_setup(char *line)
-{
- char *ep;
- int i;
-
- memset(my_ethaddr, 0, MAX_ADDR_LEN);
- /* there should really be routines to do this stuff */
- for (i = 0; i < 6; i++)
- {
- my_ethaddr[i] = line ? simple_strtoul(line, &ep, 16) : 0;
- if (line)
- line = (*ep) ? ep+1 : ep;
- }
- INCAIP2_SW_DMSG("mac address %2x-%2x-%2x-%2x-%2x-%2x \n"
- ,my_ethaddr[0]
- ,my_ethaddr[1]
- ,my_ethaddr[2]
- ,my_ethaddr[3]
- ,my_ethaddr[4]
- ,my_ethaddr[5]);
- return 0;
-}
-__setup("ethaddr=", svip_eth_ethaddr_setup);
-
-
-/**
- * Open RX DMA channels.
- * This function opens all DMA rx channels.
- *
- * \param dma_dev pointer to DMA device information
- * \ingroup Internal
- */
-static void svip_eth_open_rx_dma(struct dma_device_info *dma_dev)
-{
- int i;
-
- for(i=0; i<dma_dev->num_rx_chan; i++)
- {
- dma_dev->rx_chan[i]->open(dma_dev->rx_chan[i]);
- }
-}
-
-
-/**
- * Open TX DMA channels.
- * This function opens all DMA tx channels.
- *
- * \param dev pointer to net device structure that comprises
- * DMA device information pointed to by it's priv field.
- * \ingroup Internal
- */
-static void svip_eth_open_tx_dma(struct dma_device_info *dma_dev)
-{
- int i;
-
- for (i=0; i<dma_dev->num_tx_chan; i++)
- {
- dma_dev->tx_chan[i]->open(dma_dev->tx_chan[i]);
- }
-}
-
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
-/**
- * Enable receiving DMA.
- * This function enables the receiving DMA channel.
- *
- * \param dev pointer to net device structure that comprises
- * DMA device information pointed to by it's priv field.
- * \ingroup Internal
- */
-void svip_eth_xon(struct net_device *dev)
-{
- struct switch_priv *sw_dev = (struct switch_priv *)dev->priv;
- struct dma_device_info* dma_dev =
- (struct dma_device_info *)sw_dev->dma_device;
- unsigned long flag;
-
- local_irq_save(flag);
-
- INCAIP2_SW_DMSG("wakeup\n");
- svip_eth_open_rx_dma(dma_dev);
-
- local_irq_restore(flag);
-}
-#endif /* CONFIG_NET_HW_FLOWCONTROL */
-
-
-/**
- * Open network device.
- * This functions opens the network device and starts the interface queue.
- *
- * \param dev Device structure for Ethernet device
- * \return 0 OK, device opened
- * \return -1 Error, registering DMA device
- * \ingroup API
- */
-int svip_mii_open(struct net_device *dev)
-{
- struct svip_mii_priv *priv = netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
-
- svip_eth_open_rx_dma(dma_dev);
- svip_eth_open_tx_dma(dma_dev);
-
- netif_start_queue(dev);
- return 0;
-}
-
-
-/**
- * Close network device.
- * This functions closes the network device, which will also stop the interface
- * queue.
- *
- * \param dev Device structure for Ethernet device
- * \return 0 OK, device closed (cannot fail)
- * \ingroup API
- */
-int svip_mii_release(struct net_device *dev)
-{
- struct svip_mii_priv *priv = netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
- int i;
-
- for (i = 0; i < dma_dev->max_rx_chan_num; i++)
- dma_dev->rx_chan[i]->close(dma_dev->rx_chan[i]);
- netif_stop_queue(dev);
- return 0;
-}
-
-
-/**
- * Read data from DMA device.
- * This function reads data from the DMA device. The function is called by
- * the switch/DMA pseudo interrupt handler dma_intr_handler on occurence of
- * a DMA receive interrupt.
- *
- * \param dev Pointer to network device structure
- * \param dma_dev Pointer to dma device structure
- * \return OK In case of successful data reception from dma
- * -EIO Incorrect opt pointer provided by device
- * \ingroup Internal
- */
-int svip_mii_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
-{
- struct svip_mii_priv *priv = netdev_priv(dev);
- unsigned char *buf = NULL;
- struct sk_buff *skb = NULL;
- int len = 0;
-
- len = dma_device_read(dma_dev, &buf, (void **)&skb);
-
- if (len >= ETHERNET_PACKET_DMA_BUFFER_SIZE) {
- printk(KERN_INFO DRV_NAME ": packet too large %d\n", len);
- goto mii_hw_receive_err_exit;
- }
-
- if (skb == NULL) {
- printk(KERN_INFO DRV_NAME ": cannot restore pointer\n");
- goto mii_hw_receive_err_exit;
- }
-
- if (len > (skb->end - skb->tail)) {
- printk(KERN_INFO DRV_NAME ": BUG, len:%d end:%p tail:%p\n",
- len, skb->end, skb->tail);
- goto mii_hw_receive_err_exit;
- }
-
- skb_put(skb, len);
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
-
- priv->stats.rx_packets++;
- priv->stats.rx_bytes += len;
- return 0;
-
-mii_hw_receive_err_exit:
- if (len == 0) {
- if (skb)
- dev_kfree_skb_any(skb);
- priv->stats.rx_errors++;
- priv->stats.rx_dropped++;
- return -EIO;
- } else {
- return len;
- }
-}
-
-
-/**
- * Write data to Ethernet switch.
- * This function writes the data comprised in skb structure via DMA to the
- * Ethernet Switch. It is installed as the switch driver's hard_start_xmit
- * method.
- *
- * \param skb Pointer to socket buffer structure that contains the data
- * to be sent
- * \param dev Pointer to network device structure which is used for
- * data transmission
- * \return 1 Transmission error
- * \return 0 OK, successful data transmission
- * \ingroup API
- */
-static int svip_mii_hw_tx(char *buf, int len, struct net_device *dev)
-{
- int ret = 0;
- struct svip_mii_priv *priv = netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
- ret = dma_device_write(dma_dev, buf, len, priv->skb);
- return ret;
-}
-
-static int svip_mii_tx(struct sk_buff *skb, struct net_device *dev)
-{
- int len;
- char *data;
- struct svip_mii_priv *priv = netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
-
- len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- data = skb->data;
- priv->skb = skb;
- dev->trans_start = jiffies;
- /* TODO: we got more than 1 dma channel,
- so we should do something intelligent here to select one */
- dma_dev->current_tx_chan = 0;
-
- wmb();
-
- if (svip_mii_hw_tx(data, len, dev) != len) {
- dev_kfree_skb_any(skb);
- priv->stats.tx_errors++;
- priv->stats.tx_dropped++;
- } else {
- priv->stats.tx_packets++;
- priv->stats.tx_bytes += len;
- }
-
- return 0;
-}
-
-
-/**
- * Transmission timeout callback.
- * This functions is called when a trasmission timeout occurs. It will wake up
- * the interface queue again.
- *
- * \param dev Device structure for Ethernet device
- * \ingroup API
- */
-void svip_mii_tx_timeout(struct net_device *dev)
-{
- int i;
- struct svip_mii_priv *priv = netdev_priv(dev);
-
- priv->stats.tx_errors++;
- for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
- priv->dma_device->tx_chan[i]->disable_irq(priv->dma_device->tx_chan[i]);
- netif_wake_queue(dev);
- return;
-}
-
-
-/**
- * Get device statistics.
- * This functions returns the device statistics, stored in the device structure.
- *
- * \param dev Device structure for Ethernet device
- * \return stats Pointer to statistics structure
- * \ingroup API
- */
-static struct net_device_stats *svip_get_stats(struct net_device *dev)
-{
- struct svip_mii_priv *priv = netdev_priv(dev);
- return &priv->stats;
-}
-
-
-/**
- * Pseudo Interrupt handler for DMA.
- * This function processes DMA interrupts notified to the switch device driver.
- * The function is installed at the DMA core as interrupt handler for the
- * switch dma device.
- * It handles the following DMA interrupts:
- * passes received data to the upper layer in case of rx interrupt,
- * In case of a dma receive interrupt the received data is passed to the upper layer.
- * In case of a transmit buffer full interrupt the transmit queue is stopped.
- * In case of a transmission complete interrupt the transmit queue is restarted.
- *
- * \param dma_dev pointer to dma device structure
- * \param status type of interrupt being notified (RCV_INT: dma receive
- * interrupt, TX_BUF_FULL_INT: transmit buffer full interrupt,
- * TRANSMIT_CPT_INT: transmission complete interrupt)
- * \return OK In case of successful data reception from dma
- * \ingroup Internal
- */
-int dma_intr_handler(struct dma_device_info *dma_dev, int status)
-{
- int i;
-
- switch (status) {
- case RCV_INT:
- svip_mii_hw_receive(svip_mii0_dev, dma_dev);
- break;
-
- case TX_BUF_FULL_INT:
- printk(KERN_INFO DRV_NAME ": tx buffer full\n");
- netif_stop_queue(svip_mii0_dev);
- for (i = 0; i < dma_dev->max_tx_chan_num; i++) {
- if ((dma_dev->tx_chan[i])->control == LTQ_DMA_CH_ON)
- dma_dev->tx_chan[i]->enable_irq(dma_dev->tx_chan[i]);
- }
- break;
-
- case TRANSMIT_CPT_INT:
-
-#if 0
- for (i = 0; i < dma_dev->max_tx_chan_num; i++)
-#if 0
- dma_dev->tx_chan[i]->disable_irq(dma_dev->tx_chan[i]);
-#else
- dma_dev->tx_chan[i]->disable_irq(dma_dev->tx_chan[i], (char *)__FUNCTION__);
-#endif
- netif_wake_queue(svip_mii0_dev);
-#endif
- break;
- }
-
- return 0;
-}
-
-
-/**
- * Allocates buffer sufficient for Ethernet Frame.
- * This function is installed as DMA callback function to be called on DMA
- * receive interrupt.
- *
- * \param len Unused
- * \param *byte_offset Pointer to byte offset
- * \param **opt pointer to skb structure
- * \return NULL In case of buffer allocation fails
- * buffer Pointer to allocated memory
- * \ingroup Internal
- */
-unsigned char *svip_etop_dma_buffer_alloc(int len, int *byte_offset, void **opt)
-{
- unsigned char *buffer = NULL;
- struct sk_buff *skb = NULL;
-
- skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
- if (skb == NULL)
- return NULL;
-
- buffer = (unsigned char *)(skb->data);
- skb_reserve(skb, 2);
- *(int *)opt = (int)skb;
- *byte_offset = 2;
-
- return buffer;
-}
-
-
-/**
- * Free DMA buffer.
- * This function frees a buffer, which can be either a data buffer or an
- * skb structure.
- *
- * \param *dataptr Pointer to data buffer
- * \param *opt Pointer to skb structure
- * \return 0 OK
- * \ingroup Internal
- */
-void svip_etop_dma_buffer_free(unsigned char *dataptr, void *opt)
-{
- struct sk_buff *skb = NULL;
-
- if (opt == NULL) {
- kfree(dataptr);
- } else {
- skb = (struct sk_buff *)opt;
- dev_kfree_skb_any(skb);
- }
-}
-
-static int svip_mii_dev_init(struct net_device *dev);
-
-static const struct net_device_ops svip_eth_netdev_ops = {
- .ndo_init = svip_mii_dev_init,
- .ndo_open = svip_mii_open,
- .ndo_stop = svip_mii_release,
- .ndo_start_xmit = svip_mii_tx,
- .ndo_get_stats = svip_get_stats,
- .ndo_tx_timeout = svip_mii_tx_timeout,
-};
-
-//#include <linux/device.h>
-
-/**
- * Initialize switch driver.
- * This functions initializes the switch driver structures and registers the
- * Ethernet device.
- *
- * \param dev Device structure for Ethernet device
- * \return 0 OK
- * \return ENOMEM No memory for structures available
- * \return -1 Error during DMA init or Ethernet address configuration.
- * \ingroup API
- */
-static int svip_mii_dev_init(struct net_device *dev)
-{
- int i;
- struct svip_mii_priv *priv = netdev_priv(dev);
-
-
- ether_setup(dev);
- printk(KERN_INFO DRV_NAME ": %s is up\n", dev->name);
- dev->watchdog_timeo = 10 * HZ;
- memset(priv, 0, sizeof(*priv));
- priv->dma_device = dma_device_reserve("SW");
- if (!priv->dma_device) {
- BUG();
- return -ENODEV;
- }
- priv->dma_device->buffer_alloc = svip_etop_dma_buffer_alloc;
- priv->dma_device->buffer_free = svip_etop_dma_buffer_free;
- priv->dma_device->intr_handler = dma_intr_handler;
-
- for (i = 0; i < priv->dma_device->max_rx_chan_num; i++)
- priv->dma_device->rx_chan[i]->packet_size =
- ETHERNET_PACKET_DMA_BUFFER_SIZE;
-
- for (i = 0; i < priv->dma_device->max_tx_chan_num; i++) {
- priv->dma_device->tx_chan[i]->tx_weight=DEFAULT_SW_CHANNEL_WEIGHT;
- priv->dma_device->tx_chan[i]->packet_size =
- ETHERNET_PACKET_DMA_BUFFER_SIZE;
- }
-
- dma_device_register(priv->dma_device);
-
- printk(KERN_INFO DRV_NAME ": using mac=");
-
- for (i = 0; i < 6; i++) {
- dev->dev_addr[i] = mac_addr[i];
- printk("%02X%c", dev->dev_addr[i], (i == 5) ? ('\n') : (':'));
- }
-
- return 0;
-}
-
-static void svip_mii_chip_init(int mode)
-{
-}
-
-static int svip_mii_probe(struct platform_device *dev)
-{
- int result = 0;
- unsigned char *mac = (unsigned char *)dev->dev.platform_data;
- svip_mii0_dev = alloc_etherdev(sizeof(struct svip_mii_priv));
- svip_mii0_dev->netdev_ops = &svip_eth_netdev_ops;
- memcpy(mac_addr, mac, 6);
- strcpy(svip_mii0_dev->name, "eth%d");
- svip_mii_chip_init(REV_MII_MODE);
- result = register_netdev(svip_mii0_dev);
- if (result) {
- printk(KERN_INFO DRV_NAME
- ": error %i registering device \"%s\"\n",
- result, svip_mii0_dev->name);
- goto out;
- }
- printk(KERN_INFO DRV_NAME ": driver loaded!\n");
-
-out:
- return result;
-}
-
-static int svip_mii_remove(struct platform_device *dev)
-{
- struct svip_mii_priv *priv = netdev_priv(svip_mii0_dev);
-
- printk(KERN_INFO DRV_NAME ": cleanup\n");
-
- dma_device_unregister(priv->dma_device);
- dma_device_release(priv->dma_device);
- kfree(priv->dma_device);
- unregister_netdev(svip_mii0_dev);
- free_netdev(svip_mii0_dev);
- return 0;
-}
-
-
-static struct platform_driver svip_mii_driver = {
- .probe = svip_mii_probe,
- .remove = svip_mii_remove,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-
-/**
- * Initialize switch driver as module.
- * This functions initializes the switch driver structures and registers the
- * Ethernet device for module usage.
- *
- * \return 0 OK
- * \return ENODEV An error occured during initialization
- * \ingroup API
- */
-int __init svip_mii_init(void)
-{
- int ret = platform_driver_register(&svip_mii_driver);
- if (ret)
- printk(KERN_INFO DRV_NAME
- ": Error registering platfom driver!\n");
- return ret;
-}
-
-
-/**
- * Remove driver module.
- * This functions removes the driver and unregisters all devices.
- *
- * \ingroup API
- */
-static void __exit svip_mii_cleanup(void)
-{
- platform_driver_unregister(&svip_mii_driver);
-}
-
-module_init(svip_mii_init);
-module_exit(svip_mii_cleanup);
-
-MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/files/drivers/net/ethernet/svip_virtual_eth.c b/target/linux/lantiq/files/drivers/net/ethernet/svip_virtual_eth.c
deleted file mode 100644
index 6de0cfab8b..0000000000
--- a/target/linux/lantiq/files/drivers/net/ethernet/svip_virtual_eth.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- Am Campeon 1-12; 81726 Munich, Germany
-
- THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
- WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
- SOFTWARE IS FREE OF CHARGE.
-
- THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
- ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
- WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
- OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
- PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
- PROPERTY INFRINGEMENT.
-
- EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
- FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
- OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- DEALINGS IN THE SOFTWARE.
-
- ****************************************************************************
-Module : svip_virtual_eth.c
-
-Description : This file contains network driver implementation for a
-Virtual Ethernet interface. The Virtual Ethernet interface
-is part of Infineon's VINETIC-SVIP Linux BSP.
- *******************************************************************************/
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/platform_device.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-
-#define SVIP_VETH_VER_STR "3.0"
-#define SVIP_VETH_INFO_STR \
- "@(#)SVIP virtual ethernet interface, version " SVIP_VETH_VER_STR
-
-/******************************************************************************
- * Local define/macro definitions
- ******************************************************************************/
-struct svip_ve_priv
-{
- struct net_device_stats stats;
-};
-
-/******************************************************************************
- * Global function declarations
- ******************************************************************************/
-int svip_ve_rx(struct sk_buff *skb);
-
-/******************************************************************************
- * Local variable declarations
- ******************************************************************************/
-static struct net_device *svip_ve_dev;
-static int watchdog_timeout = 10*HZ;
-static int (*svip_ve_mps_xmit)(struct sk_buff *skb) = NULL;
-
-
-/******************************************************************************
- * Global function declarations
- ******************************************************************************/
-
-/**
- * Called by MPS driver to register a transmit routine called for each outgoing
- * VoFW0 message.
- *
- * \param mps_xmit pointer to transmit routine
- *
- * \return none
- *
- * \ingroup Internal
- */
-void register_mps_xmit_routine(int (*mps_xmit)(struct sk_buff *skb))
-{
- svip_ve_mps_xmit = mps_xmit;
-}
-EXPORT_SYMBOL(register_mps_xmit_routine);
-
-/**
- * Returns a pointer to the routine used to deliver an incoming packet/message
- * from the MPS mailbox to the networking layer. This routine is called by MPS
- * driver during initialisation time.
- *
- * \param skb pointer to incoming socket buffer
- *
- * \return svip_ve_rx pointer to incoming messages delivering routine
- *
- * \ingroup Internal
- */
-int (*register_mps_recv_routine(void)) (struct sk_buff *skb)
-{
- return svip_ve_rx;
-}
-
-/**
- * Used to deliver outgoing packets to VoFW0 module through the MPS driver.
- * Upon loading/initialisation the MPS driver is registering a transmitting
- * routine, which is called here to deliver the packet to the VoFW0 module.
- *
- * \param skb pointer to skb containing outgoing data
- * \param dev pointer to this networking device's data
- *
- * \return 0 on success
- * \return non-zero on error
- *
- * \ingroup Internal
- */
-static int svip_ve_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- int err;
- struct svip_ve_priv *priv = netdev_priv(dev);
- struct net_device_stats *stats = &priv->stats;
-
- stats->tx_packets++;
- stats->tx_bytes += skb->len;
-
- if (svip_ve_mps_xmit)
- {
- err = svip_ve_mps_xmit(skb);
- if (err)
- stats->tx_errors++;
- dev->trans_start = jiffies;
- return err;
- }
- else
- printk(KERN_ERR "%s: MPS driver not registered, outgoing packet not delivered\n", dev->name);
-
- dev_kfree_skb(skb);
-
- return -1;
-}
-
-/**
- * Called by MPS driver upon receipt of a new message from VoFW0 module in
- * the data inbox. The packet is pushed up the IP module for further processing.
- *
- * \param skb pointer to skb containing the incoming message
- *
- * \return 0 on success
- * \return non-zero on error
- *
- * \ingroup Internal
- */
-int svip_ve_rx(struct sk_buff *skb)
-{
- int err;
- struct svip_ve_priv *priv = netdev_priv(svip_ve_dev);
- struct net_device_stats *stats = &priv->stats;
-
- skb->dev = svip_ve_dev;
- skb->protocol = eth_type_trans(skb, svip_ve_dev);
-
- stats->rx_packets++;
- stats->rx_bytes += skb->len;
-
- err = netif_rx(skb);
- switch (err)
- {
- case NET_RX_SUCCESS:
- return 0;
- break;
- case NET_RX_DROP:
- default:
- stats->rx_dropped++;
- break;
- }
-
- return 1;
-}
-EXPORT_SYMBOL(svip_ve_rx);
-
-/**
- * Returns a pointer to the device's networking statistics data
- *
- * \param dev pointer to this networking device's data
- *
- * \return stats pointer to this network device's statistics data
- *
- * \ingroup Internal
- */
-static struct net_device_stats *svip_ve_get_stats(struct net_device *dev)
-{
- struct svip_ve_priv *priv = netdev_priv(dev);
-
- return &priv->stats;
-}
-
-static void svip_ve_tx_timeout(struct net_device *dev)
-{
- struct svip_ve_priv *priv = netdev_priv(dev);
-
- priv->stats.tx_errors++;
- netif_wake_queue(dev);
-}
-
-/**
- * Device open routine. Called e.g. upon setting of an IP address using,
- * 'ifconfig veth0 YYY.YYY.YYY.YYY netmask ZZZ.ZZZ.ZZZ.ZZZ' or
- * 'ifconfig veth0 up'
- *
- * \param dev pointer to this network device's data
- *
- * \return 0 on success
- * \return non-zero on error
- *
- * \ingroup Internal
- */
-int svip_ve_open(struct net_device *dev)
-{
- netif_start_queue(dev);
- return 0;
-}
-
-/**
- * Device close routine. Called e.g. upon calling
- * 'ifconfig veth0 down'
- *
- * \param dev pointer to this network device's data
- *
- * \return 0 on success
- * \return non-zero on error
- *
- * \ingroup Internal
- */
-
-int svip_ve_release(struct net_device *dev)
-{
- netif_stop_queue(dev);
- return 0;
-}
-
-static int svip_ve_dev_init(struct net_device *dev);
-
-static const struct net_device_ops svip_virtual_eth_netdev_ops = {
- .ndo_init = svip_ve_dev_init,
- .ndo_open = svip_ve_open,
- .ndo_stop = svip_ve_release,
- .ndo_start_xmit = svip_ve_xmit,
- .ndo_get_stats = svip_ve_get_stats,
- .ndo_tx_timeout = svip_ve_tx_timeout,
-};
-
-
-/**
- * Device initialisation routine which registers device interface routines.
- * It is called upon execution of 'register_netdev' routine.
- *
- * \param dev pointer to this network device's data
- *
- * \return 0 on success
- * \return non-zero on error
- *
- * \ingroup Internal
- */
-static int svip_ve_dev_init(struct net_device *dev)
-{
- ether_setup(dev); /* assign some of the fields */
-
- dev->watchdog_timeo = watchdog_timeout;
- memset(netdev_priv(dev), 0, sizeof(struct svip_ve_priv));
- dev->flags |= IFF_NOARP|IFF_PROMISC;
- dev->flags &= ~IFF_MULTICAST;
-
- /* dedicated MAC address to veth0, 00:03:19:00:15:80 */
- dev->dev_addr[0] = 0x00;
- dev->dev_addr[1] = 0x03;
- dev->dev_addr[2] = 0x19;
- dev->dev_addr[3] = 0x00;
- dev->dev_addr[4] = 0x15;
- dev->dev_addr[5] = 0x80;
-
- return 0;
-}
-
-static int svip_ve_probe(struct platform_device *dev)
-{
- int result = 0;
-
- svip_ve_dev = alloc_etherdev(sizeof(struct svip_ve_priv));
- svip_ve_dev->netdev_ops = &svip_virtual_eth_netdev_ops;
-
- strcpy(svip_ve_dev->name, "veth%d");
-
- result = register_netdev(svip_ve_dev);
- if (result)
- {
- printk(KERN_INFO "error %i registering device \"%s\"\n", result, svip_ve_dev->name);
- goto out;
- }
-
- printk (KERN_INFO "%s, (c) 2009, Lantiq Deutschland GmbH\n", &SVIP_VETH_INFO_STR[4]);
-
-out:
- return result;
-}
-
-static int svip_ve_remove(struct platform_device *dev)
-{
- unregister_netdev(svip_ve_dev);
- free_netdev(svip_ve_dev);
-
- printk(KERN_INFO "%s removed\n", svip_ve_dev->name);
- return 0;
-}
-
-static struct platform_driver svip_ve_driver = {
- .probe = svip_ve_probe,
- .remove = svip_ve_remove,
- .driver = {
- .name = "ifxmips_svip_ve",
- .owner = THIS_MODULE,
- },
-};
-
-/**
- * Module/driver entry routine
- */
-static int __init svip_ve_init_module(void)
-{
- int ret;
-
- ret = platform_driver_register(&svip_ve_driver);
- if (ret)
- printk(KERN_INFO "SVIP: error(%d) registering virtual Ethernet driver!\n", ret);
- return ret;
-}
-
-/**
- * Module exit routine (never called for statically linked driver)
- */
-static void __exit svip_ve_cleanup_module(void)
-{
- platform_driver_unregister(&svip_ve_driver);
-}
-
-module_init(svip_ve_init_module);
-module_exit(svip_ve_cleanup_module);
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("virtual ethernet driver for LANTIQ SVIP system");
-
-EXPORT_SYMBOL(register_mps_recv_routine);
diff --git a/target/linux/lantiq/files/drivers/spi/spi-falcon.c b/target/linux/lantiq/files/drivers/spi/spi-falcon.c
deleted file mode 100644
index 447bbaaa34..0000000000
--- a/target/linux/lantiq/files/drivers/spi/spi-falcon.c
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-#include <linux/workqueue.h>
-
-#include <lantiq_soc.h>
-
-#define DRV_NAME "falcon_spi"
-
-#define FALCON_SPI_XFER_BEGIN (1 << 0)
-#define FALCON_SPI_XFER_END (1 << 1)
-
-/* Bus Read Configuration Register0 */
-#define LTQ_BUSRCON0 0x00000010
-/* Bus Write Configuration Register0 */
-#define LTQ_BUSWCON0 0x00000018
-/* Serial Flash Configuration Register */
-#define LTQ_SFCON 0x00000080
-/* Serial Flash Time Register */
-#define LTQ_SFTIME 0x00000084
-/* Serial Flash Status Register */
-#define LTQ_SFSTAT 0x00000088
-/* Serial Flash Command Register */
-#define LTQ_SFCMD 0x0000008C
-/* Serial Flash Address Register */
-#define LTQ_SFADDR 0x00000090
-/* Serial Flash Data Register */
-#define LTQ_SFDATA 0x00000094
-/* Serial Flash I/O Control Register */
-#define LTQ_SFIO 0x00000098
-/* EBU Clock Control Register */
-#define LTQ_EBUCC 0x000000C4
-
-/* Dummy Phase Length */
-#define SFCMD_DUMLEN_OFFSET 16
-#define SFCMD_DUMLEN_MASK 0x000F0000
-/* Chip Select */
-#define SFCMD_CS_OFFSET 24
-#define SFCMD_CS_MASK 0x07000000
-/* field offset */
-#define SFCMD_ALEN_OFFSET 20
-#define SFCMD_ALEN_MASK 0x00700000
-/* SCK Rise-edge Position */
-#define SFTIME_SCKR_POS_OFFSET 8
-#define SFTIME_SCKR_POS_MASK 0x00000F00
-/* SCK Period */
-#define SFTIME_SCK_PER_OFFSET 0
-#define SFTIME_SCK_PER_MASK 0x0000000F
-/* SCK Fall-edge Position */
-#define SFTIME_SCKF_POS_OFFSET 12
-#define SFTIME_SCKF_POS_MASK 0x0000F000
-/* Device Size */
-#define SFCON_DEV_SIZE_A23_0 0x03000000
-#define SFCON_DEV_SIZE_MASK 0x0F000000
-/* Read Data Position */
-#define SFTIME_RD_POS_MASK 0x000F0000
-/* Data Output */
-#define SFIO_UNUSED_WD_MASK 0x0000000F
-/* Command Opcode mask */
-#define SFCMD_OPC_MASK 0x000000FF
-/* dlen bytes of data to write */
-#define SFCMD_DIR_WRITE 0x00000100
-/* Data Length offset */
-#define SFCMD_DLEN_OFFSET 9
-/* Command Error */
-#define SFSTAT_CMD_ERR 0x20000000
-/* Access Command Pending */
-#define SFSTAT_CMD_PEND 0x00400000
-/* Frequency set to 100MHz. */
-#define EBUCC_EBUDIV_SELF100 0x00000001
-/* Serial Flash */
-#define BUSRCON0_AGEN_SERIAL_FLASH 0xF0000000
-/* 8-bit multiplexed */
-#define BUSRCON0_PORTW_8_BIT_MUX 0x00000000
-/* Serial Flash */
-#define BUSWCON0_AGEN_SERIAL_FLASH 0xF0000000
-/* Chip Select after opcode */
-#define SFCMD_KEEP_CS_KEEP_SELECTED 0x00008000
-
-struct falcon_spi {
- u32 sfcmd; /* for caching of opcode, direction, ... */
- struct spi_master *master;
-};
-
-int
-falcon_spi_xfer(struct spi_device *spi,
- struct spi_transfer *t,
- unsigned long flags)
-{
- struct device *dev = &spi->dev;
- struct falcon_spi *priv = spi_master_get_devdata(spi->master);
- const u8 *txp = t->tx_buf;
- u8 *rxp = t->rx_buf;
- unsigned int bytelen = ((8 * t->len + 7) / 8);
- unsigned int len, alen, dumlen;
- u32 val;
- enum {
- state_init,
- state_command_prepare,
- state_write,
- state_read,
- state_disable_cs,
- state_end
- } state = state_init;
-
- do {
- switch (state) {
- case state_init: /* detect phase of upper layer sequence */
- {
- /* initial write ? */
- if (flags & FALCON_SPI_XFER_BEGIN) {
- if (!txp) {
- dev_err(dev,
- "BEGIN without tx data!\n");
- return -1;
- }
- /*
- * Prepare the parts of the sfcmd register,
- * which should not
- * change during a sequence!
- * Only exception are the length fields,
- * especially alen and dumlen.
- */
-
- priv->sfcmd = ((spi->chip_select
- << SFCMD_CS_OFFSET)
- & SFCMD_CS_MASK);
- priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
- priv->sfcmd |= *txp;
- txp++;
- bytelen--;
- if (bytelen) {
- /*
- * more data:
- * maybe address and/or dummy
- */
- state = state_command_prepare;
- break;
- } else {
- dev_dbg(dev, "write cmd %02X\n",
- priv->sfcmd & SFCMD_OPC_MASK);
- }
- }
- /* continued write ? */
- if (txp && bytelen) {
- state = state_write;
- break;
- }
- /* read data? */
- if (rxp && bytelen) {
- state = state_read;
- break;
- }
- /* end of sequence? */
- if (flags & FALCON_SPI_XFER_END)
- state = state_disable_cs;
- else
- state = state_end;
- break;
- }
- /* collect tx data for address and dummy phase */
- case state_command_prepare:
- {
- /* txp is valid, already checked */
- val = 0;
- alen = 0;
- dumlen = 0;
- while (bytelen > 0) {
- if (alen < 3) {
- val = (val<<8)|(*txp++);
- alen++;
- } else if ((dumlen < 15) && (*txp == 0)) {
- /*
- * assume dummy bytes are set to 0
- * from upper layer
- */
- dumlen++;
- txp++;
- } else
- break;
- bytelen--;
- }
- priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
- priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
- (dumlen << SFCMD_DUMLEN_OFFSET);
- if (alen > 0)
- ltq_ebu_w32(val, LTQ_SFADDR);
-
- dev_dbg(dev, "write cmd %02X, alen=%d "
- "(addr=%06X) dumlen=%d\n",
- priv->sfcmd & SFCMD_OPC_MASK,
- alen, val, dumlen);
-
- if (bytelen > 0) {
- /* continue with write */
- state = state_write;
- } else if (flags & FALCON_SPI_XFER_END) {
- /* end of sequence? */
- state = state_disable_cs;
- } else {
- /*
- * go to end and expect another
- * call (read or write)
- */
- state = state_end;
- }
- break;
- }
- case state_write:
- {
- /* txp still valid */
- priv->sfcmd |= SFCMD_DIR_WRITE;
- len = 0;
- val = 0;
- do {
- if (bytelen--)
- val |= (*txp++) << (8 * len++);
- if ((flags & FALCON_SPI_XFER_END)
- && (bytelen == 0)) {
- priv->sfcmd &=
- ~SFCMD_KEEP_CS_KEEP_SELECTED;
- }
- if ((len == 4) || (bytelen == 0)) {
- ltq_ebu_w32(val, LTQ_SFDATA);
- ltq_ebu_w32(priv->sfcmd
- | (len<<SFCMD_DLEN_OFFSET),
- LTQ_SFCMD);
- len = 0;
- val = 0;
- priv->sfcmd &= ~(SFCMD_ALEN_MASK
- | SFCMD_DUMLEN_MASK);
- }
- } while (bytelen);
- state = state_end;
- break;
- }
- case state_read:
- {
- /* read data */
- priv->sfcmd &= ~SFCMD_DIR_WRITE;
- do {
- if ((flags & FALCON_SPI_XFER_END)
- && (bytelen <= 4)) {
- priv->sfcmd &=
- ~SFCMD_KEEP_CS_KEEP_SELECTED;
- }
- len = (bytelen > 4) ? 4 : bytelen;
- bytelen -= len;
- ltq_ebu_w32(priv->sfcmd
- |(len<<SFCMD_DLEN_OFFSET), LTQ_SFCMD);
- priv->sfcmd &= ~(SFCMD_ALEN_MASK
- | SFCMD_DUMLEN_MASK);
- do {
- val = ltq_ebu_r32(LTQ_SFSTAT);
- if (val & SFSTAT_CMD_ERR) {
- /* reset error status */
- dev_err(dev, "SFSTAT: CMD_ERR "
- "(%x)\n", val);
- ltq_ebu_w32(SFSTAT_CMD_ERR,
- LTQ_SFSTAT);
- return -1;
- }
- } while (val & SFSTAT_CMD_PEND);
- val = ltq_ebu_r32(LTQ_SFDATA);
- do {
- *rxp = (val & 0xFF);
- rxp++;
- val >>= 8;
- len--;
- } while (len);
- } while (bytelen);
- state = state_end;
- break;
- }
- case state_disable_cs:
- {
- priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
- ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
- LTQ_SFCMD);
- val = ltq_ebu_r32(LTQ_SFSTAT);
- if (val & SFSTAT_CMD_ERR) {
- /* reset error status */
- dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
- ltq_ebu_w32(SFSTAT_CMD_ERR, LTQ_SFSTAT);
- return -1;
- }
- state = state_end;
- break;
- }
- case state_end:
- break;
- }
- } while (state != state_end);
-
- return 0;
-}
-
-static int
-falcon_spi_setup(struct spi_device *spi)
-{
- struct device *dev = &spi->dev;
- const u32 ebuclk = 100000000;
- unsigned int i;
- unsigned long flags;
-
- dev_dbg(dev, "setup\n");
-
- if (spi->master->bus_num > 0 || spi->chip_select > 0)
- return -ENODEV;
-
- spin_lock_irqsave(&ebu_lock, flags);
-
- if (ebuclk < spi->max_speed_hz) {
- /* set EBU clock to 100 MHz */
- ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, LTQ_EBUCC);
- i = 1; /* divider */
- } else {
- /* set EBU clock to 50 MHz */
- ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, LTQ_EBUCC);
-
- /* search for suitable divider */
- for (i = 1; i < 7; i++) {
- if (ebuclk / i <= spi->max_speed_hz)
- break;
- }
- }
-
- /* setup period of serial clock */
- ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
- | SFTIME_SCKR_POS_MASK
- | SFTIME_SCK_PER_MASK,
- (i << SFTIME_SCKR_POS_OFFSET)
- | (i << (SFTIME_SCK_PER_OFFSET + 1)),
- LTQ_SFTIME);
-
- /*
- * set some bits of unused_wd, to not trigger HOLD/WP
- * signals on non QUAD flashes
- */
- ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), LTQ_SFIO);
-
- ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
- LTQ_BUSRCON0);
- ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, LTQ_BUSWCON0);
- /* set address wrap around to maximum for 24-bit addresses */
- ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, LTQ_SFCON);
-
- spin_unlock_irqrestore(&ebu_lock, flags);
-
- return 0;
-}
-
-static int
-falcon_spi_transfer(struct spi_device *spi, struct spi_message *m)
-{
- struct falcon_spi *priv = spi_master_get_devdata(spi->master);
- struct spi_transfer *t;
- unsigned long spi_flags;
- unsigned long flags;
- int ret = 0;
-
- priv->sfcmd = 0;
- m->actual_length = 0;
-
- spi_flags = FALCON_SPI_XFER_BEGIN;
- list_for_each_entry(t, &m->transfers, transfer_list) {
- if (list_is_last(&t->transfer_list, &m->transfers))
- spi_flags |= FALCON_SPI_XFER_END;
-
- spin_lock_irqsave(&ebu_lock, flags);
- ret = falcon_spi_xfer(spi, t, spi_flags);
- spin_unlock_irqrestore(&ebu_lock, flags);
-
- if (ret)
- break;
-
- m->actual_length += t->len;
-
- if (t->delay_usecs || t->cs_change)
- BUG();
-
- spi_flags = 0;
- }
-
- m->status = ret;
- m->complete(m->context);
-
- return 0;
-}
-
-static void
-falcon_spi_cleanup(struct spi_device *spi)
-{
- struct device *dev = &spi->dev;
-
- dev_dbg(dev, "cleanup\n");
-}
-
-static int __devinit
-falcon_spi_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct falcon_spi *priv;
- struct spi_master *master;
- int ret;
-
- dev_dbg(dev, "probing\n");
-
- master = spi_alloc_master(&pdev->dev, sizeof(*priv));
- if (!master) {
- dev_err(dev, "no memory for spi_master\n");
- return -ENOMEM;
- }
-
- priv = spi_master_get_devdata(master);
- priv->master = master;
-
- master->mode_bits = SPI_MODE_3;
- master->num_chipselect = 1;
- master->bus_num = 0;
-
- master->setup = falcon_spi_setup;
- master->transfer = falcon_spi_transfer;
- master->cleanup = falcon_spi_cleanup;
-
- platform_set_drvdata(pdev, priv);
-
- ret = spi_register_master(master);
- if (ret)
- spi_master_put(master);
-
- return ret;
-}
-
-static int __devexit
-falcon_spi_remove(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct falcon_spi *priv = platform_get_drvdata(pdev);
-
- dev_dbg(dev, "removed\n");
-
- spi_unregister_master(priv->master);
-
- return 0;
-}
-
-static struct platform_driver falcon_spi_driver = {
- .probe = falcon_spi_probe,
- .remove = __devexit_p(falcon_spi_remove),
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE
- }
-};
-
-static int __init
-falcon_spi_init(void)
-{
- return platform_driver_register(&falcon_spi_driver);
-}
-
-static void __exit
-falcon_spi_exit(void)
-{
- platform_driver_unregister(&falcon_spi_driver);
-}
-
-module_init(falcon_spi_init);
-module_exit(falcon_spi_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Lantiq Falcon SPI controller driver");
diff --git a/target/linux/lantiq/files/drivers/spi/spi-xway.c b/target/linux/lantiq/files/drivers/spi/spi-xway.c
deleted file mode 100644
index be5c25b1fe..0000000000
--- a/target/linux/lantiq/files/drivers/spi/spi-xway.c
+++ /dev/null
@@ -1,1070 +0,0 @@
-/*
- * Lantiq SoC SPI controller
- *
- * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/completion.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-
-#include <lantiq_soc.h>
-#include <lantiq_platform.h>
-
-#define LTQ_SPI_CLC 0x00 /* Clock control */
-#define LTQ_SPI_PISEL 0x04 /* Port input select */
-#define LTQ_SPI_ID 0x08 /* Identification */
-#define LTQ_SPI_CON 0x10 /* Control */
-#define LTQ_SPI_STAT 0x14 /* Status */
-#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */
-#define LTQ_SPI_TB 0x20 /* Transmit buffer */
-#define LTQ_SPI_RB 0x24 /* Receive buffer */
-#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */
-#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */
-#define LTQ_SPI_FSTAT 0x38 /* FIFO status */
-#define LTQ_SPI_BRT 0x40 /* Baudrate timer */
-#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */
-#define LTQ_SPI_SFCON 0x60 /* Serial frame control */
-#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */
-#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */
-#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */
-#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */
-#define LTQ_SPI_RXREQ 0x80 /* Receive request */
-#define LTQ_SPI_RXCNT 0x84 /* Receive count */
-#define LTQ_SPI_DMACON 0xEC /* DMA control */
-#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */
-#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */
-#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */
-
-#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */
-#define LTQ_SPI_CLC_SMC_MASK 0xFF
-#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */
-#define LTQ_SPI_CLC_RMC_MASK 0xFF
-#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */
-#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */
-
-#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */
-#define LTQ_SPI_ID_TXFS_MASK 0x3F
-#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */
-#define LTQ_SPI_ID_RXFS_MASK 0x3F
-#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */
-#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */
-
-#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */
-#define LTQ_SPI_CON_BM_MASK 0x1F
-#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */
-#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */
-#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */
-#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
-#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
-#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */
-#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */
-#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
-#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */
-#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */
-#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */
-#define LTQ_SPI_CON_HB BIT(4) /* Heading control */
-#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */
-#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
-
-#define LTQ_SPI_STAT_RXBV_MASK 0x7
-#define LTQ_SPI_STAT_RXBV_SHIFT 28
-#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */
-#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
-#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
-#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */
-#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */
-#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */
-#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */
-#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */
-
-#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
-#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
-#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
-#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
-#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
-#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
-#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
-#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
-#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
-#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
-#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
-#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
-#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
-#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
-#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
-#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
-#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50
-
-#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */
-#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F
-#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
-#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
-
-#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */
-#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F
-#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
-#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
-
-#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f
-#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0
-#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f
-#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8
-
-#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8
-#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0
-
-#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8
-#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0
-
-#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */
-#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */
-
-#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
-#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
-#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */
-#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */
-#define LTQ_SPI_IRNEN_ALL 0xF
-
-/* Hard-wired GPIOs used by SPI controller */
-#define LTQ_SPI_GPIO_DI (ltq_is_ase()? 8 : 16)
-#define LTQ_SPI_GPIO_DO (ltq_is_ase()? 9 : 17)
-#define LTQ_SPI_GPIO_CLK (ltq_is_ase()? 10 : 18)
-
-struct ltq_spi {
- struct spi_bitbang bitbang;
- struct completion done;
- spinlock_t lock;
-
- struct device *dev;
- void __iomem *base;
- struct clk *fpiclk;
- struct clk *spiclk;
-
- int status;
- int irq[3];
-
- const u8 *tx;
- u8 *rx;
- u32 tx_cnt;
- u32 rx_cnt;
- u32 len;
- struct spi_transfer *curr_transfer;
-
- u32 (*get_tx) (struct ltq_spi *);
-
- u16 txfs;
- u16 rxfs;
- unsigned dma_support:1;
- unsigned cfg_mode:1;
-
-};
-
-struct ltq_spi_controller_state {
- void (*cs_activate) (struct spi_device *);
- void (*cs_deactivate) (struct spi_device *);
-};
-
-struct ltq_spi_irq_map {
- char *name;
- irq_handler_t handler;
-};
-
-struct ltq_spi_cs_gpio_map {
- unsigned gpio;
- unsigned mux;
-};
-
-static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
-{
- return spi_master_get_devdata(spi->master);
-}
-
-static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg)
-{
- return ioread32be(hw->base + reg);
-}
-
-static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg)
-{
- iowrite32be(val, hw->base + reg);
-}
-
-static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg)
-{
- u32 val;
-
- val = ltq_spi_reg_read(hw, reg);
- val |= bits;
- ltq_spi_reg_write(hw, val, reg);
-}
-
-static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg)
-{
- u32 val;
-
- val = ltq_spi_reg_read(hw, reg);
- val &= ~bits;
- ltq_spi_reg_write(hw, val, reg);
-}
-
-static void ltq_spi_hw_enable(struct ltq_spi *hw)
-{
- u32 clc;
-
- /* Power-up mdule */
- clk_enable(hw->spiclk);
-
- /*
- * Set clock divider for run mode to 1 to
- * run at same frequency as FPI bus
- */
- clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
- ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC);
-}
-
-static void ltq_spi_hw_disable(struct ltq_spi *hw)
-{
- /* Set clock divider to 0 and set module disable bit */
- ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
-
- /* Power-down mdule */
- clk_disable(hw->spiclk);
-}
-
-static void ltq_spi_reset_fifos(struct ltq_spi *hw)
-{
- u32 val;
-
- /*
- * Enable and flush FIFOs. Set interrupt trigger level to
- * half of FIFO count implemented in hardware.
- */
- if (hw->txfs > 1) {
- val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1);
- val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
- ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON);
- }
-
- if (hw->rxfs > 1) {
- val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1);
- val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
- ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON);
- }
-}
-
-static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
-{
- u32 stat;
- unsigned long timeout;
-
- timeout = jiffies + msecs_to_jiffies(200);
-
- do {
- stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT);
- if (!(stat & LTQ_SPI_STAT_BSY))
- return 0;
-
- cond_resched();
- } while (!time_after_eq(jiffies, timeout));
-
- dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat);
-
- return -ETIMEDOUT;
-}
-
-static void ltq_spi_config_mode_set(struct ltq_spi *hw)
-{
- if (hw->cfg_mode)
- return;
-
- /*
- * Putting the SPI module in config mode is only safe if no
- * transfer is in progress as indicated by busy flag STATE.BSY.
- */
- if (ltq_spi_wait_ready(hw)) {
- ltq_spi_reset_fifos(hw);
- hw->status = -ETIMEDOUT;
- }
- ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
-
- hw->cfg_mode = 1;
-}
-
-static void ltq_spi_run_mode_set(struct ltq_spi *hw)
-{
- if (!hw->cfg_mode)
- return;
-
- ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
-
- hw->cfg_mode = 0;
-}
-
-static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw)
-{
- const u8 *tx = hw->tx;
- u32 data = *tx++;
-
- hw->tx_cnt++;
- hw->tx++;
-
- return data;
-}
-
-static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw)
-{
- const u16 *tx = (u16 *) hw->tx;
- u32 data = *tx++;
-
- hw->tx_cnt += 2;
- hw->tx += 2;
-
- return data;
-}
-
-static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw)
-{
- const u32 *tx = (u32 *) hw->tx;
- u32 data = *tx++;
-
- hw->tx_cnt += 4;
- hw->tx += 4;
-
- return data;
-}
-
-static void ltq_spi_bits_per_word_set(struct spi_device *spi)
-{
- struct ltq_spi *hw = ltq_spi_to_hw(spi);
- u32 bm;
- u8 bits_per_word = spi->bits_per_word;
-
- /*
- * Use either default value of SPI device or value
- * from current transfer.
- */
- if (hw->curr_transfer && hw->curr_transfer->bits_per_word)
- bits_per_word = hw->curr_transfer->bits_per_word;
-
- if (bits_per_word <= 8)
- hw->get_tx = ltq_spi_tx_word_u8;
- else if (bits_per_word <= 16)
- hw->get_tx = ltq_spi_tx_word_u16;
- else if (bits_per_word <= 32)
- hw->get_tx = ltq_spi_tx_word_u32;
-
- /* CON.BM value = bits_per_word - 1 */
- bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
-
- ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK <<
- LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON);
- ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON);
-}
-
-static void ltq_spi_speed_set(struct spi_device *spi)
-{
- struct ltq_spi *hw = ltq_spi_to_hw(spi);
- u32 br, max_speed_hz, spi_clk;
- u32 speed_hz = spi->max_speed_hz;
-
- /*
- * Use either default value of SPI device or value
- * from current transfer.
- */
- if (hw->curr_transfer && hw->curr_transfer->speed_hz)
- speed_hz = hw->curr_transfer->speed_hz;
-
- /*
- * SPI module clock is derived from FPI bus clock dependent on
- * divider value in CLC.RMS which is always set to 1.
- */
- spi_clk = clk_get_rate(hw->fpiclk);
-
- /*
- * Maximum SPI clock frequency in master mode is half of
- * SPI module clock frequency. Maximum reload value of
- * baudrate generator BR is 2^16.
- */
- max_speed_hz = spi_clk / 2;
- if (speed_hz >= max_speed_hz)
- br = 0;
- else
- br = (max_speed_hz / speed_hz) - 1;
-
- if (br > 0xFFFF)
- br = 0xFFFF;
-
- ltq_spi_reg_write(hw, br, LTQ_SPI_BRT);
-}
-
-static void ltq_spi_clockmode_set(struct spi_device *spi)
-{
- struct ltq_spi *hw = ltq_spi_to_hw(spi);
- u32 con;
-
- con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
-
- /*
- * SPI mode mapping in CON register:
- * Mode CPOL CPHA CON.PO CON.PH
- * 0 0 0 0 1
- * 1 0 1 0 0
- * 2 1 0 1 1
- * 3 1 1 1 0
- */
- if (spi->mode & SPI_CPHA)
- con &= ~LTQ_SPI_CON_PH;
- else
- con |= LTQ_SPI_CON_PH;
-
- if (spi->mode & SPI_CPOL)
- con |= LTQ_SPI_CON_PO;
- else
- con &= ~LTQ_SPI_CON_PO;
-
- /* Set heading control */
- if (spi->mode & SPI_LSB_FIRST)
- con &= ~LTQ_SPI_CON_HB;
- else
- con |= LTQ_SPI_CON_HB;
-
- ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
-}
-
-static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t)
-{
- u32 con;
-
- con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
-
- if (t) {
- if (t->tx_buf && t->rx_buf) {
- con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
- } else if (t->rx_buf) {
- con &= ~LTQ_SPI_CON_RXOFF;
- con |= LTQ_SPI_CON_TXOFF;
- } else if (t->tx_buf) {
- con &= ~LTQ_SPI_CON_TXOFF;
- con |= LTQ_SPI_CON_RXOFF;
- }
- } else
- con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
-
- ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
-}
-
-static void ltq_spi_gpio_cs_activate(struct spi_device *spi)
-{
- struct ltq_spi_controller_data *cdata = spi->controller_data;
- int val = spi->mode & SPI_CS_HIGH ? 1 : 0;
-
- gpio_set_value(cdata->gpio, val);
-}
-
-static void ltq_spi_gpio_cs_deactivate(struct spi_device *spi)
-{
- struct ltq_spi_controller_data *cdata = spi->controller_data;
- int val = spi->mode & SPI_CS_HIGH ? 0 : 1;
-
- gpio_set_value(cdata->gpio, val);
-}
-
-static void ltq_spi_internal_cs_activate(struct spi_device *spi)
-{
- struct ltq_spi *hw = ltq_spi_to_hw(spi);
- u32 fgpo;
-
- fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT));
- ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-}
-
-static void ltq_spi_internal_cs_deactivate(struct spi_device *spi)
-{
- struct ltq_spi *hw = ltq_spi_to_hw(spi);
- u32 fgpo;
-
- fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
- ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-}
-
-static void ltq_spi_chipselect(struct spi_device *spi, int cs)
-{
- struct ltq_spi *hw = ltq_spi_to_hw(spi);
- struct ltq_spi_controller_state *cstate = spi->controller_state;
-
- switch (cs) {
- case BITBANG_CS_ACTIVE:
- ltq_spi_bits_per_word_set(spi);
- ltq_spi_speed_set(spi);
- ltq_spi_clockmode_set(spi);
- ltq_spi_run_mode_set(hw);
-
- cstate->cs_activate(spi);
- break;
-
- case BITBANG_CS_INACTIVE:
- cstate->cs_deactivate(spi);
-
- ltq_spi_config_mode_set(hw);
-
- break;
- }
-}
-
-static int ltq_spi_setup_transfer(struct spi_device *spi,
- struct spi_transfer *t)
-{
- struct ltq_spi *hw = ltq_spi_to_hw(spi);
- u8 bits_per_word = spi->bits_per_word;
-
- hw->curr_transfer = t;
-
- if (t && t->bits_per_word)
- bits_per_word = t->bits_per_word;
-
- if (bits_per_word > 32)
- return -EINVAL;
-
- ltq_spi_config_mode_set(hw);
-
- return 0;
-}
-
-static const struct ltq_spi_cs_gpio_map ltq_spi_cs[] = {
- { 15, 2 },
- { 22, 2 },
- { 13, 1 },
- { 10, 1 },
- { 9, 1 },
- { 11, 3 },
-};
-
-static const struct ltq_spi_cs_gpio_map ltq_spi_cs_ase[] = {
- { 7, 2 },
- { 15, 1 },
- { 14, 1 },
-};
-
-static int ltq_spi_setup(struct spi_device *spi)
-{
- struct ltq_spi *hw = ltq_spi_to_hw(spi);
- struct ltq_spi_controller_data *cdata = spi->controller_data;
- struct ltq_spi_controller_state *cstate;
- u32 gpocon, fgpo;
- int ret;
-
- /* Set default word length to 8 if not set */
- if (!spi->bits_per_word)
- spi->bits_per_word = 8;
-
- if (spi->bits_per_word > 32)
- return -EINVAL;
-
- if (!spi->controller_state) {
- cstate = kzalloc(sizeof(struct ltq_spi_controller_state),
- GFP_KERNEL);
- if (!cstate)
- return -ENOMEM;
-
- spi->controller_state = cstate;
- } else
- return 0;
-
- /*
- * Up to six GPIOs can be connected to the SPI module
- * via GPIO alternate function to control the chip select lines.
- * For more flexibility in board layout this driver can also control
- * the CS lines via GPIO API. If GPIOs should be used, board setup code
- * have to register the SPI device with struct ltq_spi_controller_data
- * attached.
- */
- if (cdata && cdata->gpio) {
- ret = gpio_request(cdata->gpio, "spi-cs");
- if (ret)
- return -EBUSY;
-
- ret = spi->mode & SPI_CS_HIGH ? 0 : 1;
- gpio_direction_output(cdata->gpio, ret);
-
- cstate->cs_activate = ltq_spi_gpio_cs_activate;
- cstate->cs_deactivate = ltq_spi_gpio_cs_deactivate;
- } else {
- struct ltq_spi_cs_gpio_map *cs_map =
- ltq_is_ase() ? ltq_spi_cs_ase : ltq_spi_cs;
- ret = ltq_gpio_request(&spi->dev, cs_map[spi->chip_select].gpio,
- cs_map[spi->chip_select].mux,
- 1, "spi-cs");
- if (ret)
- return -EBUSY;
-
- gpocon = (1 << (spi->chip_select +
- LTQ_SPI_GPOCON_ISCSBN_SHIFT));
-
- if (spi->mode & SPI_CS_HIGH)
- gpocon |= (1 << spi->chip_select);
-
- fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
-
- ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON);
- ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-
- cstate->cs_activate = ltq_spi_internal_cs_activate;
- cstate->cs_deactivate = ltq_spi_internal_cs_deactivate;
- }
-
- return 0;
-}
-
-static void ltq_spi_cleanup(struct spi_device *spi)
-{
- struct ltq_spi_controller_data *cdata = spi->controller_data;
- struct ltq_spi_controller_state *cstate = spi->controller_state;
- unsigned gpio;
-
- if (cdata && cdata->gpio)
- gpio = cdata->gpio;
- else
- gpio = ltq_is_ase() ? ltq_spi_cs_ase[spi->chip_select].gpio :
- ltq_spi_cs[spi->chip_select].gpio;
-
- gpio_free(gpio);
- kfree(cstate);
-}
-
-static void ltq_spi_txfifo_write(struct ltq_spi *hw)
-{
- u32 fstat, data;
- u16 fifo_space;
-
- /* Determine how much FIFOs are free for TX data */
- fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
- fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) &
- LTQ_SPI_FSTAT_TXFFL_MASK);
-
- if (!fifo_space)
- return;
-
- while (hw->tx_cnt < hw->len && fifo_space) {
- data = hw->get_tx(hw);
- ltq_spi_reg_write(hw, data, LTQ_SPI_TB);
- fifo_space--;
- }
-}
-
-static void ltq_spi_rxfifo_read(struct ltq_spi *hw)
-{
- u32 fstat, data, *rx32;
- u16 fifo_fill;
- u8 rxbv, shift, *rx8;
-
- /* Determine how much FIFOs are filled with RX data */
- fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
- fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT)
- & LTQ_SPI_FSTAT_RXFFL_MASK);
-
- if (!fifo_fill)
- return;
-
- /*
- * The 32 bit FIFO is always used completely independent from the
- * bits_per_word value. Thus four bytes have to be read at once
- * per FIFO.
- */
- rx32 = (u32 *) hw->rx;
- while (hw->len - hw->rx_cnt >= 4 && fifo_fill) {
- *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB);
- hw->rx_cnt += 4;
- hw->rx += 4;
- fifo_fill--;
- }
-
- /*
- * If there are remaining bytes, read byte count from STAT.RXBV
- * register and read the data byte-wise.
- */
- while (fifo_fill && hw->rx_cnt < hw->len) {
- rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >>
- LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK;
- data = ltq_spi_reg_read(hw, LTQ_SPI_RB);
-
- shift = (rxbv - 1) * 8;
- rx8 = hw->rx;
-
- while (rxbv) {
- *rx8++ = (data >> shift) & 0xFF;
- rxbv--;
- shift -= 8;
- hw->rx_cnt++;
- hw->rx++;
- }
-
- fifo_fill--;
- }
-}
-
-static void ltq_spi_rxreq_set(struct ltq_spi *hw)
-{
- u32 rxreq, rxreq_max, rxtodo;
-
- rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK;
-
- /*
- * In RX-only mode the serial clock is activated only after writing
- * the expected amount of RX bytes into RXREQ register.
- * To avoid receive overflows at high clocks it is better to request
- * only the amount of bytes that fits into all FIFOs. This value
- * depends on the FIFO size implemented in hardware.
- */
- rxreq = hw->len - hw->rx_cnt;
- rxreq_max = hw->rxfs << 2;
- rxreq = min(rxreq_max, rxreq);
-
- if (!rxtodo && rxreq)
- ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ);
-}
-
-static inline void ltq_spi_complete(struct ltq_spi *hw)
-{
- complete(&hw->done);
-}
-
-irqreturn_t ltq_spi_tx_irq(int irq, void *data)
-{
- struct ltq_spi *hw = data;
- unsigned long flags;
- int completed = 0;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- if (hw->tx_cnt < hw->len)
- ltq_spi_txfifo_write(hw);
-
- if (hw->tx_cnt == hw->len)
- completed = 1;
-
- spin_unlock_irqrestore(&hw->lock, flags);
-
- if (completed)
- ltq_spi_complete(hw);
-
- return IRQ_HANDLED;
-}
-
-irqreturn_t ltq_spi_rx_irq(int irq, void *data)
-{
- struct ltq_spi *hw = data;
- unsigned long flags;
- int completed = 0;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- if (hw->rx_cnt < hw->len) {
- ltq_spi_rxfifo_read(hw);
-
- if (hw->tx && hw->tx_cnt < hw->len)
- ltq_spi_txfifo_write(hw);
- }
-
- if (hw->rx_cnt == hw->len)
- completed = 1;
- else if (!hw->tx)
- ltq_spi_rxreq_set(hw);
-
- spin_unlock_irqrestore(&hw->lock, flags);
-
- if (completed)
- ltq_spi_complete(hw);
-
- return IRQ_HANDLED;
-}
-
-irqreturn_t ltq_spi_err_irq(int irq, void *data)
-{
- struct ltq_spi *hw = data;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->lock, flags);
-
- /* Disable all interrupts */
- ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
-
- /* Clear all error flags */
- ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-
- /* Flush FIFOs */
- ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
- ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
-
- hw->status = -EIO;
- spin_unlock_irqrestore(&hw->lock, flags);
-
- ltq_spi_complete(hw);
-
- return IRQ_HANDLED;
-}
-
-static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-{
- struct ltq_spi *hw = ltq_spi_to_hw(spi);
- u32 irq_flags = 0;
-
- hw->tx = t->tx_buf;
- hw->rx = t->rx_buf;
- hw->len = t->len;
- hw->tx_cnt = 0;
- hw->rx_cnt = 0;
- hw->status = 0;
- INIT_COMPLETION(hw->done);
-
- ltq_spi_xmit_set(hw, t);
-
- /* Enable error interrupts */
- ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
-
- if (hw->tx) {
- /* Initially fill TX FIFO with as much data as possible */
- ltq_spi_txfifo_write(hw);
- irq_flags |= LTQ_SPI_IRNEN_T;
-
- /* Always enable RX interrupt in Full Duplex mode */
- if (hw->rx)
- irq_flags |= LTQ_SPI_IRNEN_R;
- } else if (hw->rx) {
- /* Start RX clock */
- ltq_spi_rxreq_set(hw);
-
- /* Enable RX interrupt to receive data from RX FIFOs */
- irq_flags |= LTQ_SPI_IRNEN_R;
- }
-
- /* Enable TX or RX interrupts */
- ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN);
- wait_for_completion_interruptible(&hw->done);
-
- /* Disable all interrupts */
- ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
-
- /*
- * Return length of current transfer for bitbang utility code if
- * no errors occured during transmission.
- */
- if (!hw->status)
- hw->status = hw->len;
-
- return hw->status;
-}
-
-static const struct ltq_spi_irq_map ltq_spi_irqs[] = {
- { "spi_tx", ltq_spi_tx_irq },
- { "spi_rx", ltq_spi_rx_irq },
- { "spi_err", ltq_spi_err_irq },
-};
-
-static int __devinit
-ltq_spi_probe(struct platform_device *pdev)
-{
- struct spi_master *master;
- struct resource *r;
- struct ltq_spi *hw;
- struct ltq_spi_platform_data *pdata = pdev->dev.platform_data;
- int ret, i;
- u32 data, id;
-
- master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi));
- if (!master) {
- dev_err(&pdev->dev, "spi_alloc_master\n");
- ret = -ENOMEM;
- goto err;
- }
-
- hw = spi_master_get_devdata(master);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- dev_err(&pdev->dev, "platform_get_resource\n");
- ret = -ENOENT;
- goto err_master;
- }
-
- r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
- pdev->name);
- if (!r) {
- dev_err(&pdev->dev, "devm_request_mem_region\n");
- ret = -ENXIO;
- goto err_master;
- }
-
- hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
- if (!hw->base) {
- dev_err(&pdev->dev, "devm_ioremap_nocache\n");
- ret = -ENXIO;
- goto err_master;
- }
-
- hw->fpiclk = clk_get_fpi();
- if (IS_ERR(hw->fpiclk)) {
- dev_err(&pdev->dev, "fpi clk\n");
- ret = PTR_ERR(hw->fpiclk);
- goto err_master;
- }
-
- hw->spiclk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(hw->spiclk)) {
- dev_err(&pdev->dev, "spi clk\n");
- ret = PTR_ERR(hw->spiclk);
- goto err_master;
- }
-
- memset(hw->irq, 0, sizeof(hw->irq));
- for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) {
- ret = platform_get_irq_byname(pdev, ltq_spi_irqs[i].name);
- if (0 > ret) {
- dev_err(&pdev->dev, "platform_get_irq_byname\n");
- goto err_irq;
- }
-
- hw->irq[i] = ret;
- ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler,
- 0, ltq_spi_irqs[i].name, hw);
- if (ret) {
- dev_err(&pdev->dev, "request_irq\n");
- goto err_irq;
- }
- }
-
- hw->bitbang.master = spi_master_get(master);
- hw->bitbang.chipselect = ltq_spi_chipselect;
- hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
- hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
-
- master->bus_num = pdev->id;
- master->num_chipselect = pdata->num_chipselect;
- master->setup = ltq_spi_setup;
- master->cleanup = ltq_spi_cleanup;
-
- hw->dev = &pdev->dev;
- init_completion(&hw->done);
- spin_lock_init(&hw->lock);
-
- /* Set GPIO alternate functions to SPI */
- ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_DI, 2, 0, "spi-di");
- ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_DO, 2, 1, "spi-do");
- ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_CLK, 2, 1, "spi-clk");
-
- ltq_spi_hw_enable(hw);
-
- /* Read module capabilities */
- id = ltq_spi_reg_read(hw, LTQ_SPI_ID);
- hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
- hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
- hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0;
-
- ltq_spi_config_mode_set(hw);
-
- /* Enable error checking, disable TX/RX, set idle value high */
- data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
- LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN |
- LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE;
- ltq_spi_reg_write(hw, data, LTQ_SPI_CON);
-
- /* Enable master mode and clear error flags */
- ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS |
- LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-
- /* Reset GPIO/CS registers */
- ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON);
- ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO);
-
- /* Enable and flush FIFOs */
- ltq_spi_reset_fifos(hw);
-
- ret = spi_bitbang_start(&hw->bitbang);
- if (ret) {
- dev_err(&pdev->dev, "spi_bitbang_start\n");
- goto err_bitbang;
- }
-
- platform_set_drvdata(pdev, hw);
-
- pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n",
- id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support);
-
- return 0;
-
-err_bitbang:
- ltq_spi_hw_disable(hw);
-
-err_irq:
- clk_put(hw->fpiclk);
-
- for (; i > 0; i--)
- free_irq(hw->irq[i], hw);
-
-err_master:
- spi_master_put(master);
-
-err:
- return ret;
-}
-
-static int __devexit
-ltq_spi_remove(struct platform_device *pdev)
-{
- struct ltq_spi *hw = platform_get_drvdata(pdev);
- int ret, i;
-
- ret = spi_bitbang_stop(&hw->bitbang);
- if (ret)
- return ret;
-
- platform_set_drvdata(pdev, NULL);
-
- ltq_spi_config_mode_set(hw);
- ltq_spi_hw_disable(hw);
-
- for (i = 0; i < ARRAY_SIZE(hw->irq); i++)
- if (0 < hw->irq[i])
- free_irq(hw->irq[i], hw);
-
- gpio_free(LTQ_SPI_GPIO_DI);
- gpio_free(LTQ_SPI_GPIO_DO);
- gpio_free(LTQ_SPI_GPIO_CLK);
-
- clk_put(hw->fpiclk);
- spi_master_put(hw->bitbang.master);
-
- return 0;
-}
-
-static struct platform_driver ltq_spi_driver = {
- .probe = ltq_spi_probe,
- .remove = __devexit_p(ltq_spi_remove),
- .driver = {
- .name = "ltq_spi",
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(ltq_spi_driver);
-
-MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
-MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ltq-spi");
diff --git a/target/linux/lantiq/files/drivers/spi/spi_svip.c b/target/linux/lantiq/files/drivers/spi/spi_svip.c
deleted file mode 100644
index ae25c20b3a..0000000000
--- a/target/linux/lantiq/files/drivers/spi/spi_svip.c
+++ /dev/null
@@ -1,955 +0,0 @@
-/************************************************************************
- *
- * Copyright (c) 2008
- * Infineon Technologies AG
- * St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- * Inspired by Atmel AT32/AT91 SPI Controller driver
- * Copyright (c) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- ************************************************************************/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <asm/io.h>
-
-#include <status_reg.h>
-#include <base_reg.h>
-#include <ssc_reg.h>
-#include <sys0_reg.h>
-#include <sys1_reg.h>
-
-#define SFRAME_SIZE 512 /* bytes */
-#define FIFO_HEADROOM 2 /* words */
-
-#define SVIP_SSC_RFIFO_WORDS 8
-
-enum svip_ssc_dir {
- SSC_RXTX,
- SSC_RX,
- SSC_TX,
- SSC_UNDEF
-};
-
-/*
- * The core SPI transfer engine just talks to a register bank to set up
- * DMA transfers; transfer queue progress is driven by IRQs. The clock
- * framework provides the base clock, subdivided for each spi_device.
- */
-struct svip_ssc_device {
- struct svip_reg_ssc *regs;
- enum svip_ssc_dir bus_dir;
- struct spi_device *stay;
-
- u8 stopping;
- struct list_head queue;
- struct spi_transfer *current_transfer;
- int remaining_bytes;
- int rx_bytes;
- int tx_bytes;
-
- char intname[4][16];
-
- spinlock_t lock;
-};
-
-static int svip_ssc_setup(struct spi_device *spi);
-
-extern unsigned int ltq_get_fbs0_hz(void);
-
-static void cs_activate(struct svip_ssc_device *ssc_dev, struct spi_device *spi)
-{
- ssc_dev->regs->whbgpostat = 0x0001 << spi->chip_select; /* activate the chip select */
-}
-
-static void cs_deactivate(struct svip_ssc_device *ssc_dev, struct spi_device *spi)
-{
- ssc_dev->regs->whbgpostat = 0x0100 << spi->chip_select; /* deactivate the chip select */
-}
-
-/*
- * "Normally" returns Byte Valid = 4.
- * If the unaligned remainder of the packet is 3 bytes, these have to be
- * transferred as a combination of a 16-bit and a 8-bit FPI transfer. For
- * 2 or 1 remaining bytes a single 16-bit or 8-bit transfer will do.
- */
-static int inline _estimate_bv(int byte_pos, int bytelen)
-{
- int remainder = bytelen % 4;
-
- if (byte_pos < (bytelen - remainder))
- return 4;
-
- if (remainder == 3)
- {
- if (byte_pos == (bytelen - remainder))
- return 2;
- else
- return 1;
- }
- return remainder;
-}
-
-/*
- * Submit next transfer.
- * lock is held, spi irq is blocked
- */
-static void svip_ssc_next_xfer(struct spi_master *master,
- struct spi_message *msg)
-{
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
- struct spi_transfer *xfer;
- unsigned char *buf_ptr;
-
- xfer = ssc_dev->current_transfer;
- if (!xfer || ssc_dev->remaining_bytes == 0) {
- if (xfer)
- xfer = list_entry(xfer->transfer_list.next,
- struct spi_transfer, transfer_list);
- else
- xfer = list_entry(msg->transfers.next,
- struct spi_transfer, transfer_list);
- ssc_dev->remaining_bytes = xfer->len;
- ssc_dev->rx_bytes = 0;
- ssc_dev->tx_bytes = 0;
- ssc_dev->current_transfer = xfer;
- ssc_dev->regs->sfcon = 0; /* reset Serial Framing */
-
- /* enable and flush RX/TX FIFO */
- ssc_dev->regs->rxfcon =
- SSC_RXFCON_RXFITL_VAL(SVIP_SSC_RFIFO_WORDS-FIFO_HEADROOM) |
- SSC_RXFCON_RXFLU | /* Receive FIFO Flush */
- SSC_RXFCON_RXFEN; /* Receive FIFO Enable */
-
- ssc_dev->regs->txfcon =
- SSC_TXFCON_TXFITL_VAL(FIFO_HEADROOM) |
- SSC_TXFCON_TXFLU | /* Transmit FIFO Flush */
- SSC_TXFCON_TXFEN; /* Transmit FIFO Enable */
-
- asm("sync");
-
- /* select mode RXTX, RX or TX */
- if (xfer->rx_buf && xfer->tx_buf) /* RX and TX */
- {
- if (ssc_dev->bus_dir != SSC_RXTX)
- {
- ssc_dev->regs->mcon &= ~(SSC_MCON_RXOFF | SSC_MCON_TXOFF);
- ssc_dev->bus_dir = SSC_RXTX;
- ssc_dev->regs->irnen = SSC_IRNEN_T | SSC_IRNEN_F | SSC_IRNEN_E;
- }
- ssc_dev->regs->sfcon =
- SSC_SFCON_PLEN_VAL(0) |
- SSC_SFCON_DLEN_VAL(((xfer->len-1)%SFRAME_SIZE)*8+7) |
- SSC_SFCON_STOP |
- SSC_SFCON_ICLK_VAL(2) |
- SSC_SFCON_IDAT_VAL(2) |
- SSC_SFCON_IAEN |
- SSC_SFCON_SFEN;
-
- }
- else if (xfer->rx_buf) /* RX only */
- {
- if (ssc_dev->bus_dir != SSC_RX)
- {
- ssc_dev->regs->mcon =
- (ssc_dev->regs->mcon | SSC_MCON_TXOFF) & ~SSC_MCON_RXOFF;
-
- ssc_dev->bus_dir = SSC_RX;
-
- ssc_dev->regs->irnen = SSC_IRNEN_R | SSC_IRNEN_E;
- }
- /* Initiate clock generation for Rx-Only Transfer. In case of RX-only transfer,
- * rx_bytes represents the number of already requested bytes.
- */
- ssc_dev->rx_bytes = min(xfer->len, (unsigned)(SVIP_SSC_RFIFO_WORDS*4));
- ssc_dev->regs->rxreq = ssc_dev->rx_bytes;
- }
- else /* TX only */
- {
- if (ssc_dev->bus_dir != SSC_TX)
- {
- ssc_dev->regs->mcon =
- (ssc_dev->regs->mcon | SSC_MCON_RXOFF) & ~SSC_MCON_TXOFF;
-
- ssc_dev->bus_dir = SSC_TX;
-
- ssc_dev->regs->irnen =
- SSC_IRNEN_T | SSC_IRNEN_F | SSC_IRNEN_E;
- }
- ssc_dev->regs->sfcon =
- SSC_SFCON_PLEN_VAL(0) |
- SSC_SFCON_DLEN_VAL(((xfer->len-1)%SFRAME_SIZE)*8+7) |
- SSC_SFCON_STOP |
- SSC_SFCON_ICLK_VAL(2) |
- SSC_SFCON_IDAT_VAL(2) |
- SSC_SFCON_IAEN |
- SSC_SFCON_SFEN;
- }
- }
-
- if (xfer->tx_buf)
- {
- int outstanding;
- int i;
- int fstat = ssc_dev->regs->fstat;
- int txffl = SSC_FSTAT_TXFFL_GET(fstat);
- int rxffl = SSC_FSTAT_RXFFL_GET(fstat);
-
- outstanding = txffl;
-
- if (xfer->rx_buf)
- {
- outstanding += rxffl;
- if (SSC_STATE_BSY_GET(ssc_dev->regs->state))
- outstanding++;
-
- while (rxffl) /* is 0 in TX-Only mode */
- {
- unsigned int rb;
- int rxbv = _estimate_bv(ssc_dev->rx_bytes, xfer->len);
- rb = ssc_dev->regs->rb;
- for (i=0; i<rxbv; i++)
- {
- ((unsigned char*)xfer->rx_buf)[ssc_dev->rx_bytes] =
- (rb >> ((rxbv-i-1)*8)) & 0xFF;
-
- ssc_dev->rx_bytes++;
- }
- rxffl--;
- outstanding--;
- }
- ssc_dev->remaining_bytes = xfer->len - ssc_dev->rx_bytes;
- }
-
- /* for last Tx cycle set TxFifo threshold to 0 */
- if ((xfer->len - ssc_dev->tx_bytes) <=
- (4*(SVIP_SSC_RFIFO_WORDS-1-outstanding)))
- {
- ssc_dev->regs->txfcon = SSC_TXFCON_TXFITL_VAL(0) |
- SSC_TXFCON_TXFEN;
- }
-
- while ((ssc_dev->tx_bytes < xfer->len) &&
- (outstanding < (SVIP_SSC_RFIFO_WORDS-1)))
- {
- unsigned int tb = 0;
- int txbv = _estimate_bv(ssc_dev->tx_bytes, xfer->len);
-
- for (i=0; i<txbv; i++)
- {
- tb |= ((unsigned char*)xfer->tx_buf)[ssc_dev->tx_bytes] <<
- ((txbv-i-1)*8);
-
- ssc_dev->tx_bytes++;
- }
- switch(txbv)
- {
-#ifdef __BIG_ENDIAN
- case 1:
- *((unsigned char *)(&(ssc_dev->regs->tb))+3) = tb & 0xFF;
- break;
- case 2:
- *((unsigned short *)(&(ssc_dev->regs->tb))+1) = tb & 0xFFFF;
- break;
-#else /* __LITTLE_ENDIAN */
- case 1:
- *((unsigned char *)(&(ssc_dev->regs->tb))) = tb & 0xFF;
- break;
- case 2:
- *((unsigned short *)(&(ssc_dev->regs->tb))) = tb & 0xFFFF;
- break;
-#endif
- default:
- ssc_dev->regs->tb = tb;
- }
- outstanding++;
- }
- }
- else /* xfer->tx_buf == NULL -> RX only! */
- {
- int j;
- int rxffl = SSC_FSTAT_RXFFL_GET(ssc_dev->regs->fstat);
- int rxbv = 0;
- unsigned int rbuf;
-
- buf_ptr = (unsigned char*)xfer->rx_buf +
- (xfer->len - ssc_dev->remaining_bytes);
-
- for (j = 0; j < rxffl; j++)
- {
- rxbv = SSC_STATE_RXBV_GET(ssc_dev->regs->state);
- rbuf = ssc_dev->regs->rb;
-
- if (rxbv == 4)
- {
- *((unsigned int*)buf_ptr+j) = ntohl(rbuf);
- }
- else
- {
- int b;
-#ifdef __BIG_ENDIAN
- for (b = 0; b < rxbv; b++)
- {
- buf_ptr[4*j+b] = ((unsigned char*)(&rbuf))[4-rxbv+b];
- }
-#else /* __LITTLE_ENDIAN */
- for (b = 0; b < rxbv; b++)
- {
- buf_ptr[4*j+b] = ((unsigned char*)(&rbuf))[rxbv-1-b];
- }
-#endif
- }
- ssc_dev->remaining_bytes -= rxbv;
- }
- if ((ssc_dev->rx_bytes < xfer->len) &&
- !SSC_STATE_BSY_GET(ssc_dev->regs->state))
- {
- int rxreq = min(xfer->len - ssc_dev->rx_bytes,
- (unsigned)(SVIP_SSC_RFIFO_WORDS*4));
-
- ssc_dev->rx_bytes += rxreq;
- ssc_dev->regs->rxreq = rxreq;
- }
-
- if (ssc_dev->remaining_bytes < 0)
- {
- printk("ssc_dev->remaining_bytes = %d! xfer->len = %d, "
- "rxffl=%d, rxbv=%d\n", ssc_dev->remaining_bytes, xfer->len,
- rxffl, rxbv);
-
- ssc_dev->remaining_bytes = 0;
- }
- }
-}
-
-/*
- * Submit next message.
- * lock is held
- */
-static void svip_ssc_next_message(struct spi_master *master)
-{
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
- struct spi_message *msg;
- struct spi_device *spi;
-
- BUG_ON(ssc_dev->current_transfer);
-
- msg = list_entry(ssc_dev->queue.next, struct spi_message, queue);
- spi = msg->spi;
-
- dev_dbg(master->dev.parent, "start message %p on %p\n", msg, spi);
-
- /* select chip if it's not still active */
- if (ssc_dev->stay) {
- if (ssc_dev->stay != spi) {
- cs_deactivate(ssc_dev, ssc_dev->stay);
- svip_ssc_setup(spi);
- cs_activate(ssc_dev, spi);
- }
- ssc_dev->stay = NULL;
- }
- else {
- svip_ssc_setup(spi);
- cs_activate(ssc_dev, spi);
- }
-
- svip_ssc_next_xfer(master, msg);
-}
-
-/*
- * Report message completion.
- * lock is held
- */
-static void
-svip_ssc_msg_done(struct spi_master *master, struct svip_ssc_device *ssc_dev,
- struct spi_message *msg, int status, int stay)
-{
- if (!stay || status < 0)
- cs_deactivate(ssc_dev, msg->spi);
- else
- ssc_dev->stay = msg->spi;
-
- list_del(&msg->queue);
- msg->status = status;
-
- dev_dbg(master->dev.parent,
- "xfer complete: %u bytes transferred\n",
- msg->actual_length);
-
- spin_unlock(&ssc_dev->lock);
- msg->complete(msg->context);
- spin_lock(&ssc_dev->lock);
-
- ssc_dev->current_transfer = NULL;
-
- /* continue if needed */
- if (list_empty(&ssc_dev->queue) || ssc_dev->stopping)
- ; /* TODO: disable hardware */
- else
- svip_ssc_next_message(master);
-}
-
-static irqreturn_t svip_ssc_eir_handler(int irq, void *dev_id)
-{
- struct platform_device *pdev = (struct platform_device*)dev_id;
- struct spi_master *master = platform_get_drvdata(pdev);
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
-
- dev_err (&pdev->dev, "ERROR: errirq. STATE = 0x%0lx\n",
- ssc_dev->regs->state);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t svip_ssc_rir_handler(int irq, void *dev_id)
-{
- struct platform_device *pdev = (struct platform_device*)dev_id;
- struct spi_master *master = platform_get_drvdata(pdev);
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
- struct spi_message *msg;
- struct spi_transfer *xfer;
-
- xfer = ssc_dev->current_transfer;
- msg = list_entry(ssc_dev->queue.next, struct spi_message, queue);
-
- /* Tx and Rx Interrupts are fairly unpredictable. Just leave interrupt
- * handler for spurious Interrupts!
- */
- if (!xfer) {
- dev_dbg(master->dev.parent,
- "%s(%d): xfer = NULL\n", __FUNCTION__, irq);
- goto out;
- }
- if ( !(xfer->rx_buf) ) {
- dev_dbg(master->dev.parent,
- "%s(%d): xfer->rx_buf = NULL\n", __FUNCTION__, irq);
- goto out;
- }
- if (ssc_dev->remaining_bytes > 0)
- {
- /*
- * Keep going, we still have data to send in
- * the current transfer.
- */
- svip_ssc_next_xfer(master, msg);
- }
-
- if (ssc_dev->remaining_bytes == 0)
- {
- msg->actual_length += xfer->len;
-
- if (msg->transfers.prev == &xfer->transfer_list) {
- /* report completed message */
- svip_ssc_msg_done(master, ssc_dev, msg, 0,
- xfer->cs_change);
- }
- else {
- if (xfer->cs_change) {
- cs_deactivate(ssc_dev, msg->spi);
- udelay(1); /* not nice in interrupt context */
- cs_activate(ssc_dev, msg->spi);
- }
-
- /* Not done yet. Submit the next transfer. */
- svip_ssc_next_xfer(master, msg);
- }
- }
-out:
- return IRQ_HANDLED;
-}
-
-static irqreturn_t svip_ssc_tir_handler(int irq, void *dev_id)
-{
- struct platform_device *pdev = (struct platform_device*)dev_id;
- struct spi_master *master = platform_get_drvdata(pdev);
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
- struct spi_message *msg;
- struct spi_transfer *xfer;
- int tx_remain;
-
- xfer = ssc_dev->current_transfer;
- msg = list_entry(ssc_dev->queue.next, struct spi_message, queue);
-
- /* Tx and Rx Interrupts are fairly unpredictable. Just leave interrupt
- * handler for spurious Interrupts!
- */
- if (!xfer) {
- dev_dbg(master->dev.parent,
- "%s(%d): xfer = NULL\n", __FUNCTION__, irq);
- goto out;
- }
- if ( !(xfer->tx_buf) ) {
- dev_dbg(master->dev.parent,
- "%s(%d): xfer->tx_buf = NULL\n", __FUNCTION__, irq);
- goto out;
- }
-
- if (ssc_dev->remaining_bytes > 0)
- {
- tx_remain = xfer->len - ssc_dev->tx_bytes;
- if ( tx_remain == 0 )
- {
- dev_dbg(master->dev.parent,
- "%s(%d): tx_remain = 0\n", __FUNCTION__, irq);
- }
- else
- /*
- * Keep going, we still have data to send in
- * the current transfer.
- */
- svip_ssc_next_xfer(master, msg);
- }
-out:
- return IRQ_HANDLED;
-}
-
-static irqreturn_t svip_ssc_fir_handler(int irq, void *dev_id)
-{
- struct platform_device *pdev = (struct platform_device*)dev_id;
- struct spi_master *master = platform_get_drvdata(pdev);
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
- struct spi_message *msg;
- struct spi_transfer *xfer;
-
- xfer = ssc_dev->current_transfer;
- msg = list_entry(ssc_dev->queue.next, struct spi_message, queue);
-
- /* Tx and Rx Interrupts are fairly unpredictable. Just leave interrupt
- * handler for spurious Interrupts!
- */
- if (!xfer) {
- dev_dbg(master->dev.parent,
- "%s(%d): xfer = NULL\n", __FUNCTION__, irq);
- goto out;
- }
- if ( !(xfer->tx_buf) ) {
- dev_dbg(master->dev.parent,
- "%s(%d): xfer->tx_buf = NULL\n", __FUNCTION__, irq);
- goto out;
- }
-
- if (ssc_dev->remaining_bytes > 0)
- {
- int tx_remain = xfer->len - ssc_dev->tx_bytes;
-
- if (tx_remain == 0)
- {
- /* Frame interrupt gets raised _before_ last Rx interrupt */
- if (xfer->rx_buf)
- {
- svip_ssc_next_xfer(master, msg);
- if (ssc_dev->remaining_bytes)
- printk("expected RXTX transfer to be complete!\n");
- }
- ssc_dev->remaining_bytes = 0;
- }
- else
- {
- ssc_dev->regs->sfcon = SSC_SFCON_PLEN_VAL(0) |
- SSC_SFCON_DLEN_VAL(SFRAME_SIZE*8-1) |
- SSC_SFCON_STOP |
- SSC_SFCON_ICLK_VAL(2) |
- SSC_SFCON_IDAT_VAL(2) |
- SSC_SFCON_IAEN |
- SSC_SFCON_SFEN;
- }
- }
-
- if (ssc_dev->remaining_bytes == 0)
- {
- msg->actual_length += xfer->len;
-
- if (msg->transfers.prev == &xfer->transfer_list) {
- /* report completed message */
- svip_ssc_msg_done(master, ssc_dev, msg, 0,
- xfer->cs_change);
- }
- else {
- if (xfer->cs_change) {
- cs_deactivate(ssc_dev, msg->spi);
- udelay(1); /* not nice in interrupt context */
- cs_activate(ssc_dev, msg->spi);
- }
-
- /* Not done yet. Submit the next transfer. */
- svip_ssc_next_xfer(master, msg);
- }
- }
-
-out:
- return IRQ_HANDLED;
-}
-
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_LOOP)
-
-static int svip_ssc_setup(struct spi_device *spi)
-{
- struct spi_master *master = spi->master;
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
- unsigned int bits = spi->bits_per_word;
- unsigned int br, sck_hz = spi->max_speed_hz;
- unsigned long flags;
-
- if (ssc_dev->stopping)
- return -ESHUTDOWN;
-
- if (spi->chip_select >= master->num_chipselect) {
- dev_dbg(&spi->dev,
- "setup: invalid chipselect %u (%u defined)\n",
- spi->chip_select, master->num_chipselect);
- return -EINVAL;
- }
-
- if (bits == 0)
- bits = 8;
- if (bits != 8) {
- dev_dbg(&spi->dev,
- "setup: invalid bits_per_word %u (expect 8)\n",
- bits);
- return -EINVAL;
- }
-
- if (spi->mode & ~MODEBITS) {
- dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
- spi->mode & ~MODEBITS);
- return -EINVAL;
- }
-
- /* Disable SSC */
- ssc_dev->regs->whbstate = SSC_WHBSTATE_CLREN;
-
- if (sck_hz == 0)
- sck_hz = 10000;
-
- br = ltq_get_fbs0_hz()/(2 *sck_hz);
- if (ltq_get_fbs0_hz()%(2 *sck_hz) == 0)
- br = br -1;
- ssc_dev->regs->br = br;
-
- /* set Control Register */
- ssc_dev->regs->mcon = SSC_MCON_ENBV |
- SSC_MCON_RUEN |
- SSC_MCON_TUEN |
- SSC_MCON_AEN |
- SSC_MCON_REN |
- SSC_MCON_TEN |
- (spi->mode & SPI_CPOL ? SSC_MCON_PO : 0) | /* Clock Polarity */
- (spi->mode & SPI_CPHA ? 0 : SSC_MCON_PH) | /* Tx on trailing edge */
- (spi->mode & SPI_LOOP ? SSC_MCON_LB : 0) | /* Loopback */
- (spi->mode & SPI_LSB_FIRST ? 0 : SSC_MCON_HB); /* MSB first */
- ssc_dev->bus_dir = SSC_UNDEF;
-
- /* Enable SSC */
- ssc_dev->regs->whbstate = SSC_WHBSTATE_SETEN;
- asm("sync");
-
- spin_lock_irqsave(&ssc_dev->lock, flags);
- if (ssc_dev->stay == spi)
- ssc_dev->stay = NULL;
- cs_deactivate(ssc_dev, spi);
- spin_unlock_irqrestore(&ssc_dev->lock, flags);
-
- dev_dbg(&spi->dev,
- "setup: %u Hz bpw %u mode 0x%02x cs %u\n",
- sck_hz, bits, spi->mode, spi->chip_select);
-
- return 0;
-}
-
-static int svip_ssc_transfer(struct spi_device *spi, struct spi_message *msg)
-{
- struct spi_master *master = spi->master;
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
- struct spi_transfer *xfer;
- unsigned long flags;
-
- dev_dbg(&spi->dev, "new message %p submitted\n", msg);
-
- if (unlikely(list_empty(&msg->transfers)
- || !spi->max_speed_hz)) {
- return -EINVAL;
- }
-
- if (ssc_dev->stopping)
- return -ESHUTDOWN;
-
- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- if (!(xfer->tx_buf || xfer->rx_buf) || (xfer->len == 0)) {
- dev_dbg(&spi->dev, "missing rx or tx buf\n");
- return -EINVAL;
- }
-
- /* FIXME implement these protocol options!! */
- if (xfer->bits_per_word || xfer->speed_hz) {
- dev_dbg(&spi->dev, "no protocol options yet\n");
- return -ENOPROTOOPT;
- }
-
-#ifdef VERBOSE
- dev_dbg(spi->dev,
- " xfer %p: len %u tx %p/%08x rx %p/%08x\n",
- xfer, xfer->len,
- xfer->tx_buf, xfer->tx_dma,
- xfer->rx_buf, xfer->rx_dma);
-#endif
- }
-
- msg->status = -EINPROGRESS;
- msg->actual_length = 0;
-
- spin_lock_irqsave(&ssc_dev->lock, flags);
- list_add_tail(&msg->queue, &ssc_dev->queue);
- if (!ssc_dev->current_transfer)
- {
- /* start transmission machine, if not started yet */
- svip_ssc_next_message(master);
- }
- spin_unlock_irqrestore(&ssc_dev->lock, flags);
-
- return 0;
-}
-
-static void svip_ssc_cleanup(struct spi_device *spi)
-{
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(spi->master);
- unsigned long flags;
-
- if (!spi->controller_state)
- return;
-
- spin_lock_irqsave(&ssc_dev->lock, flags);
- if (ssc_dev->stay == spi) {
- ssc_dev->stay = NULL;
- cs_deactivate(ssc_dev, spi);
- }
- spin_unlock_irqrestore(&ssc_dev->lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int __init svip_ssc_probe(struct platform_device *pdev)
-{
- int ret;
- struct spi_master *master;
- struct svip_ssc_device *ssc_dev;
- struct resource *res_regs;
- int irq;
-
- ret = -ENOMEM;
-
- /* setup spi core then atmel-specific driver state */
- master = spi_alloc_master(&pdev->dev, sizeof (*ssc_dev));
- if (!master)
- {
- dev_err (&pdev->dev, "ERROR: no memory for master spi\n");
- goto errout;
- }
-
- ssc_dev = spi_master_get_devdata(master);
- platform_set_drvdata(pdev, master);
-
- master->bus_num = pdev->id;
- master->num_chipselect = 8;
- master->mode_bits = MODEBITS;
- master->setup = svip_ssc_setup;
- master->transfer = svip_ssc_transfer;
- master->cleanup = svip_ssc_cleanup;
-
- spin_lock_init(&ssc_dev->lock);
- INIT_LIST_HEAD(&ssc_dev->queue);
-
- /* retrive register configration */
- res_regs = platform_get_resource_byname (pdev, IORESOURCE_MEM, "regs");
- if (NULL == res_regs)
- {
- dev_err (&pdev->dev, "ERROR: missed 'regs' resource\n");
- goto spierr;
- }
-
- ssc_dev->regs = (struct svip_reg_ssc*)KSEG1ADDR(res_regs->start);
-
- irq = platform_get_irq_byname (pdev, "tx");
- if (irq < 0)
- goto irqerr;
- sprintf(ssc_dev->intname[0], "%s_tx", pdev->name);
- ret = devm_request_irq(&pdev->dev, irq, svip_ssc_tir_handler,
- IRQF_DISABLED, ssc_dev->intname[0], pdev);
- if (ret != 0)
- goto irqerr;
-
- irq = platform_get_irq_byname (pdev, "rx");
- if (irq < 0)
- goto irqerr;
- sprintf(ssc_dev->intname[1], "%s_rx", pdev->name);
- ret = devm_request_irq(&pdev->dev, irq, svip_ssc_rir_handler,
- IRQF_DISABLED, ssc_dev->intname[1], pdev);
- if (ret != 0)
- goto irqerr;
-
- irq = platform_get_irq_byname (pdev, "err");
- if (irq < 0)
- goto irqerr;
- sprintf(ssc_dev->intname[2], "%s_err", pdev->name);
- ret = devm_request_irq(&pdev->dev, irq, svip_ssc_eir_handler,
- IRQF_DISABLED, ssc_dev->intname[2], pdev);
- if (ret != 0)
- goto irqerr;
-
- irq = platform_get_irq_byname (pdev, "frm");
- if (irq < 0)
- goto irqerr;
- sprintf(ssc_dev->intname[3], "%s_frm", pdev->name);
- ret = devm_request_irq(&pdev->dev, irq, svip_ssc_fir_handler,
- IRQF_DISABLED, ssc_dev->intname[3], pdev);
- if (ret != 0)
- goto irqerr;
-
- /*
- * Initialize the Hardware
- */
-
- /* Clear enable bit, i.e. put SSC into configuration mode */
- ssc_dev->regs->whbstate = SSC_WHBSTATE_CLREN;
- /* enable SSC core to run at fpi clock */
- ssc_dev->regs->clc = SSC_CLC_RMC_VAL(1);
- asm("sync");
-
- /* GPIO CS */
- ssc_dev->regs->gpocon = SSC_GPOCON_ISCSBN_VAL(0xFF);
- ssc_dev->regs->whbgpostat = SSC_WHBGPOSTAT_SETOUTN_VAL(0xFF); /* CS to high */
-
- /* Set Master mode */
- ssc_dev->regs->whbstate = SSC_WHBSTATE_SETMS;
-
- /* enable and flush RX/TX FIFO */
- ssc_dev->regs->rxfcon = SSC_RXFCON_RXFITL_VAL(SVIP_SSC_RFIFO_WORDS-FIFO_HEADROOM) |
- SSC_RXFCON_RXFLU | /* Receive FIFO Flush */
- SSC_RXFCON_RXFEN; /* Receive FIFO Enable */
-
- ssc_dev->regs->txfcon = SSC_TXFCON_TXFITL_VAL(FIFO_HEADROOM) |
- SSC_TXFCON_TXFLU | /* Transmit FIFO Flush */
- SSC_TXFCON_TXFEN; /* Transmit FIFO Enable */
- asm("sync");
-
- /* enable IRQ */
- ssc_dev->regs->irnen = SSC_IRNEN_E;
-
- dev_info(&pdev->dev, "controller at 0x%08lx (irq %d)\n",
- (unsigned long)ssc_dev->regs, platform_get_irq_byname (pdev, "rx"));
-
- ret = spi_register_master(master);
- if (ret)
- goto out_reset_hw;
-
- return 0;
-
-out_reset_hw:
-
-irqerr:
- devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "tx"), pdev);
- devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "rx"), pdev);
- devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "err"), pdev);
- devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "frm"), pdev);
-
-spierr:
-
- spi_master_put(master);
-
-errout:
- return ret;
-}
-
-static int __exit svip_ssc_remove(struct platform_device *pdev)
-{
- struct spi_master *master = platform_get_drvdata(pdev);
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
- struct spi_message *msg;
-
- /* reset the hardware and block queue progress */
- spin_lock_irq(&ssc_dev->lock);
- ssc_dev->stopping = 1;
- /* TODO: shutdown hardware */
- spin_unlock_irq(&ssc_dev->lock);
-
- /* Terminate remaining queued transfers */
- list_for_each_entry(msg, &ssc_dev->queue, queue) {
- /* REVISIT unmapping the dma is a NOP on ARM and AVR32
- * but we shouldn't depend on that...
- */
- msg->status = -ESHUTDOWN;
- msg->complete(msg->context);
- }
-
- devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "tx"), pdev);
- devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "rx"), pdev);
- devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "err"), pdev);
- devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "frm"), pdev);
-
- spi_unregister_master(master);
- platform_set_drvdata(pdev, NULL);
- spi_master_put(master);
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int svip_ssc_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- struct spi_master *master = platform_get_drvdata(pdev);
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
-
- clk_disable(ssc_dev->clk);
- return 0;
-}
-
-static int svip_ssc_resume(struct platform_device *pdev)
-{
- struct spi_master *master = platform_get_drvdata(pdev);
- struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master);
-
- clk_enable(ssc_dev->clk);
- return 0;
-}
-#endif
-
-static struct platform_driver svip_ssc_driver = {
- .driver = {
- .name = "ifx_ssc",
- .owner = THIS_MODULE,
- },
- .probe = svip_ssc_probe,
-#ifdef CONFIG_PM
- .suspend = svip_ssc_suspend,
- .resume = svip_ssc_resume,
-#endif
- .remove = __exit_p(svip_ssc_remove)
-};
-
-int __init svip_ssc_init(void)
-{
- return platform_driver_register(&svip_ssc_driver);
-}
-
-void __exit svip_ssc_exit(void)
-{
- platform_driver_unregister(&svip_ssc_driver);
-}
-
-module_init(svip_ssc_init);
-module_exit(svip_ssc_exit);
-
-MODULE_ALIAS("platform:ifx_ssc");
-MODULE_DESCRIPTION("Lantiq SSC Controller driver");
-MODULE_AUTHOR("Andreas Schmidt <andreas.schmidt@infineon.com>");
-MODULE_AUTHOR("Jevgenijs Grigorjevs <Jevgenijs.Grigorjevs@lantiq.com>");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/Kconfig b/target/linux/lantiq/files/drivers/usb/dwc_otg/Kconfig
deleted file mode 100644
index e018490fa3..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-config DWC_OTG
- tristate "Synopsis DWC_OTG support"
- depends on USB
- help
- This driver supports Synopsis DWC_OTG IP core
- embebbed on many SOCs (ralink, infineon, etc)
-
-choice
- prompt "USB Operation Mode"
- depends on DWC_OTG
- default DWC_OTG_HOST_ONLY
-
-config DWC_OTG_HOST_ONLY
- bool "HOST ONLY MODE"
- depends on DWC_OTG
-
-#config DWC_OTG_DEVICE_ONLY
-# bool "DEVICE ONLY MODE"
-# depends on DWC_OTG
-endchoice
-
-choice
- prompt "Platform"
- depends on DWC_OTG
- default DWC_OTG_LANTIQ
-
-config DWC_OTG_LANTIQ
- bool "Lantiq"
- depends on LANTIQ
- help
- Danube USB Host Controller
- platform support
-endchoice
-
-config DWC_OTG_DEBUG
- bool "Enable debug mode"
- depends on DWC_OTG
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/Makefile b/target/linux/lantiq/files/drivers/usb/dwc_otg/Makefile
deleted file mode 100644
index d4d23554a1..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/Makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# Makefile for DWC_otg Highspeed USB controller driver
-#
-
-ifeq ($(CONFIG_DWC_OTG_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
-
-# Use one of the following flags to compile the software in host-only or
-# device-only mode based on the configuration selected by the user
-ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y)
- EXTRA_CFLAGS += -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY
- EXTRA_CFLAGS += -DDWC_OTG_EN_ISOC -DDWC_EN_ISOC
-else ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y)
- EXTRA_CFLAGS += -DDWC_OTG_DEVICE_ONLY
-else
- EXTRA_CFLAGS += -DDWC_OTG_MODE
-endif
-
-# EXTRA_CFLAGS += -DDWC_HS_ELECT_TST
-# EXTRA_CFLAGS += -DDWC_OTG_EXT_CHG_PUMP
-
-ifeq ($(CONFIG_DWC_OTG_LANTIQ),y)
- EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY -D__KERNEL__
-endif
-ifeq ($(CONFIG_DWC_OTG_LANTIQ),m)
- EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_HOST_ONLY -DMODULE -D__KERNEL__ -DDEBUG
-endif
-
-obj-$(CONFIG_DWC_OTG) := dwc_otg.o
-dwc_otg-objs := dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
-#dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o
-dwc_otg-objs += dwc_otg_attr.o
-dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o
-dwc_otg-objs += dwc_otg_ifx.o
-dwc_otg-objs += dwc_otg_driver.o
-
-#obj-$(CONFIG_DWC_OTG_IFX) := dwc_otg_ifx.o
-#dwc_otg_ifx-objs := dwc_otg_ifx.o
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_attr.c b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_attr.c
deleted file mode 100644
index 4675a5cc7d..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_attr.c
+++ /dev/null
@@ -1,802 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.c $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 537387 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- *
- * The diagnostic interface will provide access to the controller for
- * bringing up the hardware and testing. The Linux driver attributes
- * feature will be used to provide the Linux Diagnostic
- * Interface. These attributes are accessed through sysfs.
- */
-
-/** @page "Linux Module Attributes"
- *
- * The Linux module attributes feature is used to provide the Linux
- * Diagnostic Interface. These attributes are accessed through sysfs.
- * The diagnostic interface will provide access to the controller for
- * bringing up the hardware and testing.
-
-
- The following table shows the attributes.
- <table>
- <tr>
- <td><b> Name</b></td>
- <td><b> Description</b></td>
- <td><b> Access</b></td>
- </tr>
-
- <tr>
- <td> mode </td>
- <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hnpcapable </td>
- <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
- Read returns the current value.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> srpcapable </td>
- <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
- Read returns the current value.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> hnp </td>
- <td> Initiates the Host Negotiation Protocol. Read returns the status.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> srp </td>
- <td> Initiates the Session Request Protocol. Read returns the status.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> buspower </td>
- <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> bussuspend </td>
- <td> Suspends the USB bus.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> busconnected </td>
- <td> Gets the connection status of the bus</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> gotgctl </td>
- <td> Gets or sets the Core Control Status Register.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gusbcfg </td>
- <td> Gets or sets the Core USB Configuration Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> grxfsiz </td>
- <td> Gets or sets the Receive FIFO Size Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gnptxfsiz </td>
- <td> Gets or sets the non-periodic Transmit Size Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gpvndctl </td>
- <td> Gets or sets the PHY Vendor Control Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> ggpio </td>
- <td> Gets the value in the lower 16-bits of the General Purpose IO Register
- or sets the upper 16 bits.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> guid </td>
- <td> Gets or sets the value of the User ID Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> gsnpsid </td>
- <td> Gets the value of the Synopsys ID Regester</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> devspeed </td>
- <td> Gets or sets the device speed setting in the DCFG register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> enumspeed </td>
- <td> Gets the device enumeration Speed.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hptxfsiz </td>
- <td> Gets the value of the Host Periodic Transmit FIFO</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hprt0 </td>
- <td> Gets or sets the value in the Host Port Control and Status Register</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> regoffset </td>
- <td> Sets the register offset for the next Register Access</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> regvalue </td>
- <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> remote_wakeup </td>
- <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
- wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
- Wakeup signalling bit in the Device Control Register is set for 1
- milli-second.</td>
- <td> Read/Write</td>
- </tr>
-
- <tr>
- <td> regdump </td>
- <td> Dumps the contents of core registers.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hcddump </td>
- <td> Dumps the current HCD state.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> hcd_frrem </td>
- <td> Shows the average value of the Frame Remaining
- field in the Host Frame Number/Frame Remaining register when an SOF interrupt
- occurs. This can be used to determine the average interrupt latency. Also
- shows the average Frame Remaining value for start_transfer and the "a" and
- "b" sample points. The "a" and "b" sample points may be used during debugging
- bto determine how long it takes to execute a section of the HCD code.</td>
- <td> Read</td>
- </tr>
-
- <tr>
- <td> rd_reg_test </td>
- <td> Displays the time required to read the GNPTXFSIZ register many times
- (the output shows the number of times the register is read).
- <td> Read</td>
- </tr>
-
- <tr>
- <td> wr_reg_test </td>
- <td> Displays the time required to write the GNPTXFSIZ register many times
- (the output shows the number of times the register is written).
- <td> Read</td>
- </tr>
-
- </table>
-
- Example usage:
- To get the current mode:
- cat /sys/devices/lm0/mode
-
- To power down the USB:
- echo 0 > /sys/devices/lm0/buspower
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/stat.h> /* permission constants */
-
-#include <asm/io.h>
-
-#include "dwc_otg_plat.h"
-#include "dwc_otg_attr.h"
-#include "dwc_otg_driver.h"
-// #include "dwc_otg_pcd.h"
-#include "dwc_otg_hcd.h"
-
-// 20070316, winder added.
-#ifndef SZ_256K
-#define SZ_256K 0x00040000
-#endif
-
-/*
- * MACROs for defining sysfs attribute
- */
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
- uint32_t val; \
- val = dwc_read_reg32 (_addr_); \
- val = (val & (_mask_)) >> _shift_; \
- return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-}
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
- uint32_t set = simple_strtoul(buf, NULL, 16); \
- uint32_t clear = set; \
- clear = ((~clear) << _shift_) & _mask_; \
- set = (set << _shift_) & _mask_; \
- dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
- dwc_modify_reg32(_addr_, clear, set); \
- return count; \
-}
-
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-
-#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-
-/*
- * MACROs for defining sysfs attribute for 32-bit registers
- */
-#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
- uint32_t val; \
- val = dwc_read_reg32 (_addr_); \
- return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-}
-#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
- uint32_t val = simple_strtoul(buf, NULL, 16); \
- dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
- dwc_write_reg32(_addr_, val); \
- return count; \
-}
-
-#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
-DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-
-#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
-DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-
-
-/** @name Functions for Show/Store of Attributes */
-/**@{*/
-
-/**
- * Show the register offset of the Register Access.
- */
-static ssize_t regoffset_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
-}
-
-/**
- * Set the register offset for the next Register Access Read/Write
- */
-static ssize_t regoffset_store( struct device *_dev, struct device_attribute *attr, const char *buf,
- size_t count )
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- uint32_t offset = simple_strtoul(buf, NULL, 16);
- //dev_dbg(_dev, "Offset=0x%08x\n", offset);
- if (offset < SZ_256K ) {
- otg_dev->reg_offset = offset;
- }
- else {
- dev_err( _dev, "invalid offset\n" );
- }
-
- return count;
-}
-DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, regoffset_show, regoffset_store);
-
-/**
- * Show the value of the register at the offset in the reg_offset
- * attribute.
- */
-static ssize_t regvalue_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- uint32_t val;
- volatile uint32_t *addr;
-
- if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
- /* Calculate the address */
- addr = (uint32_t*)(otg_dev->reg_offset +
- (uint8_t*)otg_dev->base);
- //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
- val = dwc_read_reg32( addr );
- return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
- "Reg@0x%06x = 0x%08x\n",
- otg_dev->reg_offset, val);
- }
- else {
- dev_err(_dev, "Invalid offset (0x%0x)\n",
- otg_dev->reg_offset);
- return sprintf(buf, "invalid offset\n" );
- }
-}
-
-/**
- * Store the value in the register at the offset in the reg_offset
- * attribute.
- *
- */
-static ssize_t regvalue_store( struct device *_dev, struct device_attribute *attr, const char *buf,
- size_t count )
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- volatile uint32_t * addr;
- uint32_t val = simple_strtoul(buf, NULL, 16);
- //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
- if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
- /* Calculate the address */
- addr = (uint32_t*)(otg_dev->reg_offset +
- (uint8_t*)otg_dev->base);
- //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
- dwc_write_reg32( addr, val );
- }
- else {
- dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
- otg_dev->reg_offset);
- }
- return count;
-}
-DEVICE_ATTR(regvalue, S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
-
-/*
- * Attributes
- */
-DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
-
-//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
-
-DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
-DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
-DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
-DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
-DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
-DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
-DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
-DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
-DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
-
-DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
-DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
-
-
-/**
- * @todo Add code to initiate the HNP.
- */
-/**
- * Show the HNP status bit
- */
-static ssize_t hnp_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- gotgctl_data_t val;
- val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
- return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
-}
-
-/**
- * Set the HNP Request bit
- */
-static ssize_t hnp_store( struct device *_dev, struct device_attribute *attr, const char *buf,
- size_t count )
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- uint32_t in = simple_strtoul(buf, NULL, 16);
- uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
- gotgctl_data_t mem;
- mem.d32 = dwc_read_reg32(addr);
- mem.b.hnpreq = in;
- dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
- dwc_write_reg32(addr, mem.d32);
- return count;
-}
-DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
-
-/**
- * @todo Add code to initiate the SRP.
- */
-/**
- * Show the SRP status bit
- */
-static ssize_t srp_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
-#ifndef DWC_HOST_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- gotgctl_data_t val;
- val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
- return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
-#else
- return sprintf(buf, "Host Only Mode!\n");
-#endif
-}
-
-/**
- * Set the SRP Request bit
- */
-static ssize_t srp_store( struct device *_dev, struct device_attribute *attr, const char *buf,
- size_t count )
-{
-#ifndef DWC_HOST_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- dwc_otg_pcd_initiate_srp(otg_dev->pcd);
-#endif
- return count;
-}
-DEVICE_ATTR(srp, 0644, srp_show, srp_store);
-
-/**
- * @todo Need to do more for power on/off?
- */
-/**
- * Show the Bus Power status
- */
-static ssize_t buspower_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- hprt0_data_t val;
- val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
- return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
-}
-
-
-/**
- * Set the Bus Power status
- */
-static ssize_t buspower_store( struct device *_dev, struct device_attribute *attr, const char *buf,
- size_t count )
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- uint32_t on = simple_strtoul(buf, NULL, 16);
- uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
- hprt0_data_t mem;
-
- mem.d32 = dwc_read_reg32(addr);
- mem.b.prtpwr = on;
-
- //dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
- dwc_write_reg32(addr, mem.d32);
-
- return count;
-}
-DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
-
-/**
- * @todo Need to do more for suspend?
- */
-/**
- * Show the Bus Suspend status
- */
-static ssize_t bussuspend_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- hprt0_data_t val;
- val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
- return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
-}
-
-/**
- * Set the Bus Suspend status
- */
-static ssize_t bussuspend_store( struct device *_dev, struct device_attribute *attr, const char *buf,
- size_t count )
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- uint32_t in = simple_strtoul(buf, NULL, 16);
- uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
- hprt0_data_t mem;
- mem.d32 = dwc_read_reg32(addr);
- mem.b.prtsusp = in;
- dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
- dwc_write_reg32(addr, mem.d32);
- return count;
-}
-DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
-
-/**
- * Show the status of Remote Wakeup.
- */
-static ssize_t remote_wakeup_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
-#ifndef DWC_HOST_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- dctl_data_t val;
- val.d32 = dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
- return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n",
- val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
-#else
- return sprintf(buf, "Host Only Mode!\n");
-#endif
-}
-
-/**
- * Initiate a remote wakeup of the host. The Device control register
- * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
- * flag is set.
- *
- */
-static ssize_t remote_wakeup_store( struct device *_dev, struct device_attribute *attr, const char *buf,
- size_t count )
-{
-#ifndef DWC_HOST_ONLY
- uint32_t val = simple_strtoul(buf, NULL, 16);
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- if (val&1) {
- dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
- }
- else {
- dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
- }
-#endif
- return count;
-}
-DEVICE_ATTR(remote_wakeup, S_IRUGO|S_IWUSR, remote_wakeup_show,
- remote_wakeup_store);
-
-/**
- * Dump global registers and either host or device registers (depending on the
- * current mode of the core).
- */
-static ssize_t regdump_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
-#ifdef DEBUG
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- printk("%s otg_dev=0x%p\n", __FUNCTION__, otg_dev);
-
- dwc_otg_dump_global_registers( otg_dev->core_if);
- if (dwc_otg_is_host_mode(otg_dev->core_if)) {
- dwc_otg_dump_host_registers( otg_dev->core_if);
- } else {
- dwc_otg_dump_dev_registers( otg_dev->core_if);
- }
-#endif
-
- return sprintf( buf, "Register Dump\n" );
-}
-
-DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
-
-/**
- * Dump the current hcd state.
- */
-static ssize_t hcddump_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
-#ifndef DWC_DEVICE_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- dwc_otg_hcd_dump_state(otg_dev->hcd);
-#endif
- return sprintf( buf, "HCD Dump\n" );
-}
-
-DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
-
-/**
- * Dump the average frame remaining at SOF. This can be used to
- * determine average interrupt latency. Frame remaining is also shown for
- * start transfer and two additional sample points.
- */
-static ssize_t hcd_frrem_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
-#ifndef DWC_DEVICE_ONLY
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- dwc_otg_hcd_dump_frrem(otg_dev->hcd);
-#endif
- return sprintf( buf, "HCD Dump Frame Remaining\n" );
-}
-
-DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
-
-/**
- * Displays the time required to read the GNPTXFSIZ register many times (the
- * output shows the number of times the register is read).
- */
-#define RW_REG_COUNT 10000000
-#define MSEC_PER_JIFFIE 1000/HZ
-static ssize_t rd_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
- int i;
- int time;
- int start_jiffies;
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
- HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
- start_jiffies = jiffies;
- for (i = 0; i < RW_REG_COUNT; i++) {
- dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
- }
- time = jiffies - start_jiffies;
- return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
- RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
-}
-
-DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
-
-/**
- * Displays the time required to write the GNPTXFSIZ register many times (the
- * output shows the number of times the register is written).
- */
-static ssize_t wr_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf)
-{
- int i;
- int time;
- int start_jiffies;
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- uint32_t reg_val;
-
- printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
- HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
- reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
- start_jiffies = jiffies;
- for (i = 0; i < RW_REG_COUNT; i++) {
- dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
- }
- time = jiffies - start_jiffies;
- return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
- RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
-}
-
-DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
-/**@}*/
-
-/**
- * Create the device files
- */
-void dwc_otg_attr_create (struct device *_dev)
-{
- int retval;
-
- retval = device_create_file(_dev, &dev_attr_regoffset);
- retval += device_create_file(_dev, &dev_attr_regvalue);
- retval += device_create_file(_dev, &dev_attr_mode);
- retval += device_create_file(_dev, &dev_attr_hnpcapable);
- retval += device_create_file(_dev, &dev_attr_srpcapable);
- retval += device_create_file(_dev, &dev_attr_hnp);
- retval += device_create_file(_dev, &dev_attr_srp);
- retval += device_create_file(_dev, &dev_attr_buspower);
- retval += device_create_file(_dev, &dev_attr_bussuspend);
- retval += device_create_file(_dev, &dev_attr_busconnected);
- retval += device_create_file(_dev, &dev_attr_gotgctl);
- retval += device_create_file(_dev, &dev_attr_gusbcfg);
- retval += device_create_file(_dev, &dev_attr_grxfsiz);
- retval += device_create_file(_dev, &dev_attr_gnptxfsiz);
- retval += device_create_file(_dev, &dev_attr_gpvndctl);
- retval += device_create_file(_dev, &dev_attr_ggpio);
- retval += device_create_file(_dev, &dev_attr_guid);
- retval += device_create_file(_dev, &dev_attr_gsnpsid);
- retval += device_create_file(_dev, &dev_attr_devspeed);
- retval += device_create_file(_dev, &dev_attr_enumspeed);
- retval += device_create_file(_dev, &dev_attr_hptxfsiz);
- retval += device_create_file(_dev, &dev_attr_hprt0);
- retval += device_create_file(_dev, &dev_attr_remote_wakeup);
- retval += device_create_file(_dev, &dev_attr_regdump);
- retval += device_create_file(_dev, &dev_attr_hcddump);
- retval += device_create_file(_dev, &dev_attr_hcd_frrem);
- retval += device_create_file(_dev, &dev_attr_rd_reg_test);
- retval += device_create_file(_dev, &dev_attr_wr_reg_test);
-
- if(retval != 0)
- {
- DWC_PRINT("cannot create sysfs device files.\n");
- // DWC_PRINT("killing own sysfs device files!\n");
- dwc_otg_attr_remove(_dev);
- }
-}
-
-/**
- * Remove the device files
- */
-void dwc_otg_attr_remove (struct device *_dev)
-{
- device_remove_file(_dev, &dev_attr_regoffset);
- device_remove_file(_dev, &dev_attr_regvalue);
- device_remove_file(_dev, &dev_attr_mode);
- device_remove_file(_dev, &dev_attr_hnpcapable);
- device_remove_file(_dev, &dev_attr_srpcapable);
- device_remove_file(_dev, &dev_attr_hnp);
- device_remove_file(_dev, &dev_attr_srp);
- device_remove_file(_dev, &dev_attr_buspower);
- device_remove_file(_dev, &dev_attr_bussuspend);
- device_remove_file(_dev, &dev_attr_busconnected);
- device_remove_file(_dev, &dev_attr_gotgctl);
- device_remove_file(_dev, &dev_attr_gusbcfg);
- device_remove_file(_dev, &dev_attr_grxfsiz);
- device_remove_file(_dev, &dev_attr_gnptxfsiz);
- device_remove_file(_dev, &dev_attr_gpvndctl);
- device_remove_file(_dev, &dev_attr_ggpio);
- device_remove_file(_dev, &dev_attr_guid);
- device_remove_file(_dev, &dev_attr_gsnpsid);
- device_remove_file(_dev, &dev_attr_devspeed);
- device_remove_file(_dev, &dev_attr_enumspeed);
- device_remove_file(_dev, &dev_attr_hptxfsiz);
- device_remove_file(_dev, &dev_attr_hprt0);
- device_remove_file(_dev, &dev_attr_remote_wakeup);
- device_remove_file(_dev, &dev_attr_regdump);
- device_remove_file(_dev, &dev_attr_hcddump);
- device_remove_file(_dev, &dev_attr_hcd_frrem);
- device_remove_file(_dev, &dev_attr_rd_reg_test);
- device_remove_file(_dev, &dev_attr_wr_reg_test);
-}
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_attr.h b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_attr.h
deleted file mode 100644
index 4bbf7df02d..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_attr.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.h $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 510275 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#if !defined(__DWC_OTG_ATTR_H__)
-#define __DWC_OTG_ATTR_H__
-
-/** @file
- * This file contains the interface to the Linux device attributes.
- */
-extern struct device_attribute dev_attr_regoffset;
-extern struct device_attribute dev_attr_regvalue;
-
-extern struct device_attribute dev_attr_mode;
-extern struct device_attribute dev_attr_hnpcapable;
-extern struct device_attribute dev_attr_srpcapable;
-extern struct device_attribute dev_attr_hnp;
-extern struct device_attribute dev_attr_srp;
-extern struct device_attribute dev_attr_buspower;
-extern struct device_attribute dev_attr_bussuspend;
-extern struct device_attribute dev_attr_busconnected;
-extern struct device_attribute dev_attr_gotgctl;
-extern struct device_attribute dev_attr_gusbcfg;
-extern struct device_attribute dev_attr_grxfsiz;
-extern struct device_attribute dev_attr_gnptxfsiz;
-extern struct device_attribute dev_attr_gpvndctl;
-extern struct device_attribute dev_attr_ggpio;
-extern struct device_attribute dev_attr_guid;
-extern struct device_attribute dev_attr_gsnpsid;
-extern struct device_attribute dev_attr_devspeed;
-extern struct device_attribute dev_attr_enumspeed;
-extern struct device_attribute dev_attr_hptxfsiz;
-extern struct device_attribute dev_attr_hprt0;
-
-void dwc_otg_attr_create (struct device *_dev);
-void dwc_otg_attr_remove (struct device *_dev);
-
-#endif
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil.c b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil.c
deleted file mode 100644
index 42c69eba48..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil.c
+++ /dev/null
@@ -1,3025 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.c $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 631780 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- *
- * The Core Interface Layer provides basic services for accessing and
- * managing the DWC_otg hardware. These services are used by both the
- * Host Controller Driver and the Peripheral Controller Driver.
- *
- * The CIL manages the memory map for the core so that the HCD and PCD
- * don't have to do this separately. It also handles basic tasks like
- * reading/writing the registers and data FIFOs in the controller.
- * Some of the data access functions provide encapsulation of several
- * operations required to perform a task, such as writing multiple
- * registers to start a transfer. Finally, the CIL performs basic
- * services that are not specific to either the host or device modes
- * of operation. These services include management of the OTG Host
- * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
- * Diagnostic API is also provided to allow testing of the controller
- * hardware.
- *
- * The Core Interface Layer has the following requirements:
- * - Provides basic controller operations.
- * - Minimal use of OS services.
- * - The OS services used will be abstracted by using inline functions
- * or macros.
- *
- */
-#include <asm/unaligned.h>
-
-#ifdef DEBUG
-#include <linux/jiffies.h>
-#endif
-
-#include "dwc_otg_plat.h"
-
-#include "dwc_otg_regs.h"
-#include "dwc_otg_cil.h"
-
-/**
- * This function is called to initialize the DWC_otg CSR data
- * structures. The register addresses in the device and host
- * structures are initialized from the base address supplied by the
- * caller. The calling function must make the OS calls to get the
- * base address of the DWC_otg controller registers. The core_params
- * argument holds the parameters that specify how the core should be
- * configured.
- *
- * @param[in] _reg_base_addr Base address of DWC_otg core registers
- * @param[in] _core_params Pointer to the core configuration parameters
- *
- */
-dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
- dwc_otg_core_params_t *_core_params)
-{
- dwc_otg_core_if_t *core_if = 0;
- dwc_otg_dev_if_t *dev_if = 0;
- dwc_otg_host_if_t *host_if = 0;
- uint8_t *reg_base = (uint8_t *)_reg_base_addr;
- int i = 0;
-
- DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, _reg_base_addr, _core_params);
-
- core_if = kmalloc( sizeof(dwc_otg_core_if_t), GFP_KERNEL);
- if (core_if == 0) {
- DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
- return 0;
- }
- memset(core_if, 0, sizeof(dwc_otg_core_if_t));
-
- core_if->core_params = _core_params;
- core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
- /*
- * Allocate the Device Mode structures.
- */
- dev_if = kmalloc( sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
- if (dev_if == 0) {
- DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
- kfree( core_if );
- return 0;
- }
-
- dev_if->dev_global_regs =
- (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
-
- for (i=0; i<MAX_EPS_CHANNELS; i++) {
- dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
- (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
- (i * DWC_EP_REG_OFFSET));
-
- dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
- (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
- (i * DWC_EP_REG_OFFSET));
- DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
- i, &dev_if->in_ep_regs[i]->diepctl);
- DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
- i, &dev_if->out_ep_regs[i]->doepctl);
- }
- dev_if->speed = 0; // unknown
- //dev_if->num_eps = MAX_EPS_CHANNELS;
- //dev_if->num_perio_eps = 0;
-
- core_if->dev_if = dev_if;
- /*
- * Allocate the Host Mode structures.
- */
- host_if = kmalloc( sizeof(dwc_otg_host_if_t), GFP_KERNEL);
- if (host_if == 0) {
- DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
- kfree( dev_if );
- kfree( core_if );
- return 0;
- }
-
- host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
- (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
- host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
- for (i=0; i<MAX_EPS_CHANNELS; i++) {
- host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
- (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
- (i * DWC_OTG_CHAN_REGS_OFFSET));
- DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
- i, &host_if->hc_regs[i]->hcchar);
- }
- host_if->num_host_channels = MAX_EPS_CHANNELS;
- core_if->host_if = host_if;
-
- for (i=0; i<MAX_EPS_CHANNELS; i++) {
- core_if->data_fifo[i] =
- (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
- (i * DWC_OTG_DATA_FIFO_SIZE));
- DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
- i, (unsigned)core_if->data_fifo[i]);
- } // for loop.
-
- core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
-
- /*
- * Store the contents of the hardware configuration registers here for
- * easy access later.
- */
- core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
- core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
- core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
- core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
-
- DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
- DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
- DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
- DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
-
-
- DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
- DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
- DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
- DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
- DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
- DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
- DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
-
- DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
- DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
-
- /*
- * Set the SRP sucess bit for FS-I2c
- */
- core_if->srp_success = 0;
- core_if->srp_timer_started = 0;
-
- return core_if;
-}
-/**
- * This function frees the structures allocated by dwc_otg_cil_init().
- *
- * @param[in] _core_if The core interface pointer returned from
- * dwc_otg_cil_init().
- *
- */
-void dwc_otg_cil_remove( dwc_otg_core_if_t *_core_if )
-{
- /* Disable all interrupts */
- dwc_modify_reg32( &_core_if->core_global_regs->gahbcfg, 1, 0);
- dwc_write_reg32( &_core_if->core_global_regs->gintmsk, 0);
-
- if ( _core_if->dev_if ) {
- kfree( _core_if->dev_if );
- }
- if ( _core_if->host_if ) {
- kfree( _core_if->host_if );
- }
- kfree( _core_if );
-}
-
-/**
- * This function enables the controller's Global Interrupt in the AHB Config
- * register.
- *
- * @param[in] _core_if Programming view of DWC_otg controller.
- */
-extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if )
-{
- gahbcfg_data_t ahbcfg = { .d32 = 0};
- ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
- dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
-}
-/**
- * This function disables the controller's Global Interrupt in the AHB Config
- * register.
- *
- * @param[in] _core_if Programming view of DWC_otg controller.
- */
-extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if )
-{
- gahbcfg_data_t ahbcfg = { .d32 = 0};
- ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
- dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
-}
-
-/**
- * This function initializes the commmon interrupts, used in both
- * device and host modes.
- *
- * @param[in] _core_if Programming view of the DWC_otg controller
- *
- */
-static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *_core_if)
-{
- dwc_otg_core_global_regs_t *global_regs =
- _core_if->core_global_regs;
- gintmsk_data_t intr_mask = { .d32 = 0};
- /* Clear any pending OTG Interrupts */
- dwc_write_reg32( &global_regs->gotgint, 0xFFFFFFFF);
- /* Clear any pending interrupts */
- dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF);
- /*
- * Enable the interrupts in the GINTMSK.
- */
- intr_mask.b.modemismatch = 1;
- intr_mask.b.otgintr = 1;
- if (!_core_if->dma_enable) {
- intr_mask.b.rxstsqlvl = 1;
- }
- intr_mask.b.conidstschng = 1;
- intr_mask.b.wkupintr = 1;
- intr_mask.b.disconnect = 1;
- intr_mask.b.usbsuspend = 1;
- intr_mask.b.sessreqintr = 1;
- dwc_write_reg32( &global_regs->gintmsk, intr_mask.d32);
-}
-
-/**
- * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
- * type.
- */
-static void init_fslspclksel(dwc_otg_core_if_t *_core_if)
-{
- uint32_t val;
- hcfg_data_t hcfg;
-
- if (((_core_if->hwcfg2.b.hs_phy_type == 2) &&
- (_core_if->hwcfg2.b.fs_phy_type == 1) &&
- (_core_if->core_params->ulpi_fs_ls)) ||
- (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS))
- {
- /* Full speed PHY */
- val = DWC_HCFG_48_MHZ;
- } else {
- /* High speed PHY running at full speed or high speed */
- val = DWC_HCFG_30_60_MHZ;
- }
-
- DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
- hcfg.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hcfg);
- hcfg.b.fslspclksel = val;
- dwc_write_reg32(&_core_if->host_if->host_global_regs->hcfg, hcfg.d32);
-}
-
-/**
- * Initializes the DevSpd field of the DCFG register depending on the PHY type
- * and the enumeration speed of the device.
- */
-static void init_devspd(dwc_otg_core_if_t *_core_if)
-{
- uint32_t val;
- dcfg_data_t dcfg;
-
- if (((_core_if->hwcfg2.b.hs_phy_type == 2) &&
- (_core_if->hwcfg2.b.fs_phy_type == 1) &&
- (_core_if->core_params->ulpi_fs_ls)) ||
- (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS))
- {
- /* Full speed PHY */
- val = 0x3;
- } else if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
- /* High speed PHY running at full speed */
- val = 0x1;
- } else {
- /* High speed PHY running at high speed */
- val = 0x0;
- }
-
- DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
- dcfg.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dcfg);
- dcfg.b.devspd = val;
- dwc_write_reg32(&_core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
-}
-
-/**
- * This function calculates the number of IN EPS
- * using GHWCFG1 and GHWCFG2 registers values
- *
- * @param _pcd the pcd structure.
- */
-static uint32_t calc_num_in_eps(dwc_otg_core_if_t * _core_if)
-{
- uint32_t num_in_eps = 0;
- uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep;
- uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2;
- uint32_t num_tx_fifos = _core_if->hwcfg4.b.num_in_eps;
- int i;
- for (i = 0; i < num_eps; ++i) {
- if (!(hwcfg1 & 0x1))
- num_in_eps++;
- hwcfg1 >>= 2;
- }
- if (_core_if->hwcfg4.b.ded_fifo_en) {
- num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
- }
- return num_in_eps;
-}
-
-
-/**
- * This function calculates the number of OUT EPS
- * using GHWCFG1 and GHWCFG2 registers values
- *
- * @param _pcd the pcd structure.
- */
-static uint32_t calc_num_out_eps(dwc_otg_core_if_t * _core_if)
-{
- uint32_t num_out_eps = 0;
- uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep;
- uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2;
- int i;
- for (i = 0; i < num_eps; ++i) {
- if (!(hwcfg1 & 0x2))
- num_out_eps++;
- hwcfg1 >>= 2;
- }
- return num_out_eps;
-}
-/**
- * This function initializes the DWC_otg controller registers and
- * prepares the core for device mode or host mode operation.
- *
- * @param _core_if Programming view of the DWC_otg controller
- *
- */
-void dwc_otg_core_init(dwc_otg_core_if_t *_core_if)
-{
- dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs;
- dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
- int i = 0;
- gahbcfg_data_t ahbcfg = { .d32 = 0};
- gusbcfg_data_t usbcfg = { .d32 = 0 };
- gi2cctl_data_t i2cctl = {.d32 = 0};
-
- DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n",_core_if);
-
- /* Common Initialization */
-
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
- DWC_DEBUGPL(DBG_CIL, "USB config register: 0x%08x\n", usbcfg.d32);
-
- /* Program the ULPI External VBUS bit if needed */
- //usbcfg.b.ulpi_ext_vbus_drv = 1;
- //usbcfg.b.ulpi_ext_vbus_drv = 0;
- usbcfg.b.ulpi_ext_vbus_drv =
- (_core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
-
- /* Set external TS Dline pulsing */
- usbcfg.b.term_sel_dl_pulse = (_core_if->core_params->ts_dline == 1) ? 1 : 0;
- dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-
- /* Reset the Controller */
- dwc_otg_core_reset( _core_if );
-
- /* Initialize parameters from Hardware configuration registers. */
-#if 0
- dev_if->num_eps = _core_if->hwcfg2.b.num_dev_ep;
- dev_if->num_perio_eps = _core_if->hwcfg4.b.num_dev_perio_in_ep;
-#else
- dev_if->num_in_eps = calc_num_in_eps(_core_if);
- dev_if->num_out_eps = calc_num_out_eps(_core_if);
-#endif
- DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",
- _core_if->hwcfg4.b.num_dev_perio_in_ep);
- DWC_DEBUGPL(DBG_CIL, "Is power optimization enabled? %s\n",
- _core_if->hwcfg4.b.power_optimiz ? "Yes" : "No");
- DWC_DEBUGPL(DBG_CIL, "vbus_valid filter enabled? %s\n",
- _core_if->hwcfg4.b.vbus_valid_filt_en ? "Yes" : "No");
- DWC_DEBUGPL(DBG_CIL, "iddig filter enabled? %s\n",
- _core_if->hwcfg4.b.iddig_filt_en ? "Yes" : "No");
-
- DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",_core_if->hwcfg4.b.num_dev_perio_in_ep);
- for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
- dev_if->perio_tx_fifo_size[i] =
- dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
- DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", i,
- dev_if->perio_tx_fifo_size[i]);
- }
- for (i = 0; i < _core_if->hwcfg4.b.num_in_eps; i++) {
- dev_if->tx_fifo_size[i] =
- dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
- DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", i,
- dev_if->perio_tx_fifo_size[i]);
- }
-
- _core_if->total_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
- _core_if->rx_fifo_size = dwc_read_reg32(&global_regs->grxfsiz);
- _core_if->nperio_tx_fifo_size = dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
-
- DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", _core_if->total_fifo_size);
- DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", _core_if->rx_fifo_size);
- DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", _core_if->nperio_tx_fifo_size);
-
- /* This programming sequence needs to happen in FS mode before any other
- * programming occurs */
- if ((_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
- (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
- /* If FS mode with FS PHY */
-
- /* core_init() is now called on every switch so only call the
- * following for the first time through. */
- if (!_core_if->phy_init_done) {
- _core_if->phy_init_done = 1;
- DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
- usbcfg.b.physel = 1;
- dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-
- /* Reset after a PHY select */
- dwc_otg_core_reset( _core_if );
- }
-
- /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
- * do this on HNP Dev/Host mode switches (done in dev_init and
- * host_init). */
- if (dwc_otg_is_host_mode(_core_if)) {
- DWC_DEBUGPL(DBG_CIL, "host mode\n");
- init_fslspclksel(_core_if);
- } else {
- DWC_DEBUGPL(DBG_CIL, "device mode\n");
- init_devspd(_core_if);
- }
-
- if (_core_if->core_params->i2c_enable) {
- DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
- /* Program GUSBCFG.OtgUtmifsSel to I2C */
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
- usbcfg.b.otgutmifssel = 1;
- dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-
- /* Program GI2CCTL.I2CEn */
- i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
- i2cctl.b.i2cdevaddr = 1;
- i2cctl.b.i2cen = 0;
- dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
- i2cctl.b.i2cen = 1;
- dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
- }
-
- } /* endif speed == DWC_SPEED_PARAM_FULL */
- else {
- /* High speed PHY. */
- if (!_core_if->phy_init_done) {
- _core_if->phy_init_done = 1;
- DWC_DEBUGPL(DBG_CIL, "High spped PHY\n");
- /* HS PHY parameters. These parameters are preserved
- * during soft reset so only program the first time. Do
- * a soft reset immediately after setting phyif. */
- usbcfg.b.ulpi_utmi_sel = _core_if->core_params->phy_type;
- if (usbcfg.b.ulpi_utmi_sel == 2) { // winder
- DWC_DEBUGPL(DBG_CIL, "ULPI\n");
- /* ULPI interface */
- usbcfg.b.phyif = 0;
- usbcfg.b.ddrsel = _core_if->core_params->phy_ulpi_ddr;
- } else {
- /* UTMI+ interface */
- if (_core_if->core_params->phy_utmi_width == 16) {
- usbcfg.b.phyif = 1;
- DWC_DEBUGPL(DBG_CIL, "UTMI+ 16\n");
- } else {
- DWC_DEBUGPL(DBG_CIL, "UTMI+ 8\n");
- usbcfg.b.phyif = 0;
- }
- }
- dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32);
-
- /* Reset after setting the PHY parameters */
- dwc_otg_core_reset( _core_if );
- }
- }
-
- if ((_core_if->hwcfg2.b.hs_phy_type == 2) &&
- (_core_if->hwcfg2.b.fs_phy_type == 1) &&
- (_core_if->core_params->ulpi_fs_ls))
- {
- DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
- usbcfg.b.ulpi_fsls = 1;
- usbcfg.b.ulpi_clk_sus_m = 1;
- dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
- } else {
- DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS=0\n");
- usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
- usbcfg.b.ulpi_fsls = 0;
- usbcfg.b.ulpi_clk_sus_m = 0;
- dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
- }
-
- /* Program the GAHBCFG Register.*/
- switch (_core_if->hwcfg2.b.architecture){
-
- case DWC_SLAVE_ONLY_ARCH:
- DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
- ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
- ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
- _core_if->dma_enable = 0;
- break;
-
- case DWC_EXT_DMA_ARCH:
- DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
- ahbcfg.b.hburstlen = _core_if->core_params->dma_burst_size;
- _core_if->dma_enable = (_core_if->core_params->dma_enable != 0);
- break;
-
- case DWC_INT_DMA_ARCH:
- DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
- //ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
- ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR4;
- _core_if->dma_enable = (_core_if->core_params->dma_enable != 0);
- break;
- }
- ahbcfg.b.dmaenable = _core_if->dma_enable;
- dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
- _core_if->en_multiple_tx_fifo = _core_if->hwcfg4.b.ded_fifo_en;
-
- /*
- * Program the GUSBCFG register.
- */
- usbcfg.d32 = dwc_read_reg32( &global_regs->gusbcfg );
-
- switch (_core_if->hwcfg2.b.op_mode) {
- case DWC_MODE_HNP_SRP_CAPABLE:
- usbcfg.b.hnpcap = (_core_if->core_params->otg_cap ==
- DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
- usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
- DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
- break;
-
- case DWC_MODE_SRP_ONLY_CAPABLE:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
- DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
- break;
-
- case DWC_MODE_NO_HNP_SRP_CAPABLE:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = 0;
- break;
-
- case DWC_MODE_SRP_CAPABLE_DEVICE:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
- DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
- break;
-
- case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = 0;
- break;
-
- case DWC_MODE_SRP_CAPABLE_HOST:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
- DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
- break;
-
- case DWC_MODE_NO_SRP_CAPABLE_HOST:
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = 0;
- break;
- }
-
- dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32);
-
- /* Enable common interrupts */
- dwc_otg_enable_common_interrupts( _core_if );
-
- /* Do device or host intialization based on mode during PCD
- * and HCD initialization */
- if (dwc_otg_is_host_mode( _core_if )) {
- DWC_DEBUGPL(DBG_ANY, "Host Mode\n" );
- _core_if->op_state = A_HOST;
- } else {
- DWC_DEBUGPL(DBG_ANY, "Device Mode\n" );
- _core_if->op_state = B_PERIPHERAL;
-#ifdef DWC_DEVICE_ONLY
- dwc_otg_core_dev_init( _core_if );
-#endif
- }
-}
-
-
-/**
- * This function enables the Device mode interrupts.
- *
- * @param _core_if Programming view of DWC_otg controller
- */
-void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if)
-{
- gintmsk_data_t intr_mask = { .d32 = 0};
- dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs;
-
- DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-
- /* Disable all interrupts. */
- dwc_write_reg32( &global_regs->gintmsk, 0);
-
- /* Clear any pending interrupts */
- dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF);
-
- /* Enable the common interrupts */
- dwc_otg_enable_common_interrupts( _core_if );
-
- /* Enable interrupts */
- intr_mask.b.usbreset = 1;
- intr_mask.b.enumdone = 1;
- //intr_mask.b.epmismatch = 1;
- intr_mask.b.inepintr = 1;
- intr_mask.b.outepintr = 1;
- intr_mask.b.erlysuspend = 1;
- if (_core_if->en_multiple_tx_fifo == 0) {
- intr_mask.b.epmismatch = 1;
- }
-
- /** @todo NGS: Should this be a module parameter? */
- intr_mask.b.isooutdrop = 1;
- intr_mask.b.eopframe = 1;
- intr_mask.b.incomplisoin = 1;
- intr_mask.b.incomplisoout = 1;
-
- dwc_modify_reg32( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-
- DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
- dwc_read_reg32( &global_regs->gintmsk));
-}
-
-/**
- * This function initializes the DWC_otg controller registers for
- * device mode.
- *
- * @param _core_if Programming view of DWC_otg controller
- *
- */
-void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if)
-{
- dwc_otg_core_global_regs_t *global_regs =
- _core_if->core_global_regs;
- dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
- dwc_otg_core_params_t *params = _core_if->core_params;
- dcfg_data_t dcfg = {.d32 = 0};
- grstctl_t resetctl = { .d32=0 };
- int i;
- uint32_t rx_fifo_size;
- fifosize_data_t nptxfifosize;
- fifosize_data_t txfifosize;
- dthrctl_data_t dthrctl;
-
- fifosize_data_t ptxfifosize;
-
- /* Restart the Phy Clock */
- dwc_write_reg32(_core_if->pcgcctl, 0);
-
- /* Device configuration register */
- init_devspd(_core_if);
- dcfg.d32 = dwc_read_reg32( &dev_if->dev_global_regs->dcfg);
- dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
- dwc_write_reg32( &dev_if->dev_global_regs->dcfg, dcfg.d32 );
-
- /* Configure data FIFO sizes */
- if ( _core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo ) {
-
- DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", _core_if->total_fifo_size);
- DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
- DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
-
- /* Rx FIFO */
- DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->grxfsiz));
- rx_fifo_size = params->dev_rx_fifo_size;
- dwc_write_reg32( &global_regs->grxfsiz, rx_fifo_size );
- DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->grxfsiz));
-
- /** Set Periodic Tx FIFO Mask all bits 0 */
- _core_if->p_tx_msk = 0;
-
- /** Set Tx FIFO Mask all bits 0 */
- _core_if->tx_msk = 0;
- if (_core_if->en_multiple_tx_fifo == 0) {
- /* Non-periodic Tx FIFO */
- DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->gnptxfsiz));
- nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
- nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
- dwc_write_reg32( &global_regs->gnptxfsiz, nptxfifosize.d32 );
- DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->gnptxfsiz));
-
-
- /**@todo NGS: Fix Periodic FIFO Sizing! */
- /*
- * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
- * Indexes of the FIFO size module parameters in the
- * dev_perio_tx_fifo_size array and the FIFO size registers in
- * the dptxfsiz array run from 0 to 14.
- */
- /** @todo Finish debug of this */
- ptxfifosize.b.startaddr =
- nptxfifosize.b.startaddr + nptxfifosize.b.depth;
- for (i = 0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) {
- ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i];
- DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n",
- i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
- dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],ptxfifosize.d32);
- DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n",
- i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
- ptxfifosize.b.startaddr += ptxfifosize.b.depth;
- }
- } else {
-
- /*
- * Tx FIFOs These FIFOs are numbered from 1 to 15.
- * Indexes of the FIFO size module parameters in the
- * dev_tx_fifo_size array and the FIFO size registers in
- * the dptxfsiz_dieptxf array run from 0 to 14.
- */
-
- /* Non-periodic Tx FIFO */
- DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->gnptxfsiz));
- nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
- nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
- dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
- DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
- dwc_read_reg32(&global_regs->gnptxfsiz));
- txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
- for (i = 1;i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) {
- txfifosize.b.depth = params->dev_tx_fifo_size[i];
- DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n",
- i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
- dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i - 1],txfifosize.d32);
- DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n",
- i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1]));
- txfifosize.b.startaddr += txfifosize.b.depth;
- }
- }
- }
- /* Flush the FIFOs */
- dwc_otg_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
- dwc_otg_flush_rx_fifo(_core_if);
-
- /* Flush the Learning Queue. */
- resetctl.b.intknqflsh = 1;
- dwc_write_reg32( &_core_if->core_global_regs->grstctl, resetctl.d32);
-
- /* Clear all pending Device Interrupts */
- dwc_write_reg32( &dev_if->dev_global_regs->diepmsk, 0 );
- dwc_write_reg32( &dev_if->dev_global_regs->doepmsk, 0 );
- dwc_write_reg32( &dev_if->dev_global_regs->daint, 0xFFFFFFFF );
- dwc_write_reg32( &dev_if->dev_global_regs->daintmsk, 0 );
-
- for (i = 0; i <= dev_if->num_in_eps; i++) {
- depctl_data_t depctl;
- depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
- if (depctl.b.epena) {
- depctl.d32 = 0;
- depctl.b.epdis = 1;
- depctl.b.snak = 1;
- } else {
- depctl.d32 = 0;
- }
- dwc_write_reg32( &dev_if->in_ep_regs[i]->diepctl, depctl.d32);
-
- dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
- dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
- dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
- }
- for (i = 0; i <= dev_if->num_out_eps; i++) {
- depctl_data_t depctl;
- depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
- if (depctl.b.epena) {
- depctl.d32 = 0;
- depctl.b.epdis = 1;
- depctl.b.snak = 1;
- } else {
- depctl.d32 = 0;
- }
- dwc_write_reg32( &dev_if->out_ep_regs[i]->doepctl, depctl.d32);
-
- //dwc_write_reg32( &dev_if->in_ep_regs[i]->dieptsiz, 0);
- dwc_write_reg32( &dev_if->out_ep_regs[i]->doeptsiz, 0);
- //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepdma, 0);
- dwc_write_reg32( &dev_if->out_ep_regs[i]->doepdma, 0);
- //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepint, 0xFF);
- dwc_write_reg32( &dev_if->out_ep_regs[i]->doepint, 0xFF);
- }
-
- if (_core_if->en_multiple_tx_fifo && _core_if->dma_enable) {
- dev_if->non_iso_tx_thr_en = _core_if->core_params->thr_ctl & 0x1;
- dev_if->iso_tx_thr_en = (_core_if->core_params->thr_ctl >> 1) & 0x1;
- dev_if->rx_thr_en = (_core_if->core_params->thr_ctl >> 2) & 0x1;
- dev_if->rx_thr_length = _core_if->core_params->rx_thr_length;
- dev_if->tx_thr_length = _core_if->core_params->tx_thr_length;
- dthrctl.d32 = 0;
- dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
- dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
- dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
- dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
- dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
- dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl,dthrctl.d32);
- DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\n"
- "Rx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
- dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en,
- dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len,
- dthrctl.b.rx_thr_len);
- }
- dwc_otg_enable_device_interrupts( _core_if );
- {
- diepmsk_data_t msk = {.d32 = 0};
- msk.b.txfifoundrn = 1;
- dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32,msk.d32);
-}
-}
-
-/**
- * This function enables the Host mode interrupts.
- *
- * @param _core_if Programming view of DWC_otg controller
- */
-void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if)
-{
- dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
- gintmsk_data_t intr_mask = {.d32 = 0};
-
- DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-
- /* Disable all interrupts. */
- dwc_write_reg32(&global_regs->gintmsk, 0);
-
- /* Clear any pending interrupts. */
- dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-
- /* Enable the common interrupts */
- dwc_otg_enable_common_interrupts(_core_if);
-
- /*
- * Enable host mode interrupts without disturbing common
- * interrupts.
- */
- intr_mask.b.sofintr = 1;
- intr_mask.b.portintr = 1;
- intr_mask.b.hcintr = 1;
-
- //dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
- //dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
- dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-}
-
-/**
- * This function disables the Host Mode interrupts.
- *
- * @param _core_if Programming view of DWC_otg controller
- */
-void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if)
-{
- dwc_otg_core_global_regs_t *global_regs =
- _core_if->core_global_regs;
- gintmsk_data_t intr_mask = {.d32 = 0};
-
- DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
-
- /*
- * Disable host mode interrupts without disturbing common
- * interrupts.
- */
- intr_mask.b.sofintr = 1;
- intr_mask.b.portintr = 1;
- intr_mask.b.hcintr = 1;
- intr_mask.b.ptxfempty = 1;
- intr_mask.b.nptxfempty = 1;
-
- dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-}
-
-#if 0
-/* currently not used, keep it here as if needed later */
-static int phy_read(dwc_otg_core_if_t * _core_if, int addr)
-{
- u32 val;
- int timeout = 10;
-
- dwc_write_reg32(&_core_if->core_global_regs->gpvndctl,
- 0x02000000 | (addr << 16));
- val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
- while (((val & 0x08000000) == 0) && (timeout--)) {
- udelay(1000);
- val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
- }
- val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
- printk("%s: addr=%02x regval=%02x\n", __func__, addr, val & 0x000000ff);
-
- return 0;
-}
-#endif
-
-/**
- * This function initializes the DWC_otg controller registers for
- * host mode.
- *
- * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
- * request queues. Host channels are reset to ensure that they are ready for
- * performing transfers.
- *
- * @param _core_if Programming view of DWC_otg controller
- *
- */
-void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if)
-{
- dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
- dwc_otg_host_if_t *host_if = _core_if->host_if;
- dwc_otg_core_params_t *params = _core_if->core_params;
- hprt0_data_t hprt0 = {.d32 = 0};
- fifosize_data_t nptxfifosize;
- fifosize_data_t ptxfifosize;
- int i;
- hcchar_data_t hcchar;
- hcfg_data_t hcfg;
- dwc_otg_hc_regs_t *hc_regs;
- int num_channels;
- gotgctl_data_t gotgctl = {.d32 = 0};
-
- DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, _core_if);
-
- /* Restart the Phy Clock */
- dwc_write_reg32(_core_if->pcgcctl, 0);
-
- /* Initialize Host Configuration Register */
- init_fslspclksel(_core_if);
- if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
- hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
- hcfg.b.fslssupp = 1;
- dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
- }
-
- /* Configure data FIFO sizes */
- if (_core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
- DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", _core_if->total_fifo_size);
- DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
- DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
- DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
-
- /* Rx FIFO */
- DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
- dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
- DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
-
- /* Non-periodic Tx FIFO */
- DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
- nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
- nptxfifosize.b.startaddr = params->host_rx_fifo_size;
- dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
- DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
-
- /* Periodic Tx FIFO */
- DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
- ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
- ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
- dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
- DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
- }
-
- /* Clear Host Set HNP Enable in the OTG Control Register */
- gotgctl.b.hstsethnpen = 1;
- dwc_modify_reg32( &global_regs->gotgctl, gotgctl.d32, 0);
-
- /* Make sure the FIFOs are flushed. */
- dwc_otg_flush_tx_fifo(_core_if, 0x10 /* all Tx FIFOs */);
- dwc_otg_flush_rx_fifo(_core_if);
-
- /* Flush out any leftover queued requests. */
- num_channels = _core_if->core_params->host_channels;
- for (i = 0; i < num_channels; i++) {
- hc_regs = _core_if->host_if->hc_regs[i];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.chen = 0;
- hcchar.b.chdis = 1;
- hcchar.b.epdir = 0;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- }
-
- /* Halt all channels to put them into a known state. */
- for (i = 0; i < num_channels; i++) {
- int count = 0;
- hc_regs = _core_if->host_if->hc_regs[i];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.chen = 1;
- hcchar.b.chdis = 1;
- hcchar.b.epdir = 0;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
- do {
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (++count > 200) {
- DWC_ERROR("%s: Unable to clear halt on channel %d\n",
- __func__, i);
- break;
- }
- udelay(100);
- } while (hcchar.b.chen);
- }
-
- /* Turn on the vbus power. */
- DWC_PRINT("Init: Port Power? op_state=%d\n", _core_if->op_state);
- if (_core_if->op_state == A_HOST){
- hprt0.d32 = dwc_otg_read_hprt0(_core_if);
- DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
- if (hprt0.b.prtpwr == 0 ) {
- hprt0.b.prtpwr = 1;
- dwc_write_reg32(host_if->hprt0, hprt0.d32);
- }
- }
-
- dwc_otg_enable_host_interrupts( _core_if );
-}
-
-/**
- * Prepares a host channel for transferring packets to/from a specific
- * endpoint. The HCCHARn register is set up with the characteristics specified
- * in _hc. Host channel interrupts that may need to be serviced while this
- * transfer is in progress are enabled.
- *
- * @param _core_if Programming view of DWC_otg controller
- * @param _hc Information needed to initialize the host channel
- */
-void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-{
- uint32_t intr_enable;
- hcintmsk_data_t hc_intr_mask;
- gintmsk_data_t gintmsk = {.d32 = 0};
- hcchar_data_t hcchar;
- hcsplt_data_t hcsplt;
-
- uint8_t hc_num = _hc->hc_num;
- dwc_otg_host_if_t *host_if = _core_if->host_if;
- dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
-
- /* Clear old interrupt conditions for this host channel. */
- hc_intr_mask.d32 = 0xFFFFFFFF;
- hc_intr_mask.b.reserved = 0;
- dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
-
- /* Enable channel interrupts required for this transfer. */
- hc_intr_mask.d32 = 0;
- hc_intr_mask.b.chhltd = 1;
- if (_core_if->dma_enable) {
- hc_intr_mask.b.ahberr = 1;
- if (_hc->error_state && !_hc->do_split &&
- _hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
- hc_intr_mask.b.ack = 1;
- if (_hc->ep_is_in) {
- hc_intr_mask.b.datatglerr = 1;
- if (_hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
- hc_intr_mask.b.nak = 1;
- }
- }
- }
- } else {
- switch (_hc->ep_type) {
- case DWC_OTG_EP_TYPE_CONTROL:
- case DWC_OTG_EP_TYPE_BULK:
- hc_intr_mask.b.xfercompl = 1;
- hc_intr_mask.b.stall = 1;
- hc_intr_mask.b.xacterr = 1;
- hc_intr_mask.b.datatglerr = 1;
- if (_hc->ep_is_in) {
- hc_intr_mask.b.bblerr = 1;
- } else {
- hc_intr_mask.b.nak = 1;
- hc_intr_mask.b.nyet = 1;
- if (_hc->do_ping) {
- hc_intr_mask.b.ack = 1;
- }
- }
-
- if (_hc->do_split) {
- hc_intr_mask.b.nak = 1;
- if (_hc->complete_split) {
- hc_intr_mask.b.nyet = 1;
- }
- else {
- hc_intr_mask.b.ack = 1;
- }
- }
-
- if (_hc->error_state) {
- hc_intr_mask.b.ack = 1;
- }
- break;
- case DWC_OTG_EP_TYPE_INTR:
- hc_intr_mask.b.xfercompl = 1;
- hc_intr_mask.b.nak = 1;
- hc_intr_mask.b.stall = 1;
- hc_intr_mask.b.xacterr = 1;
- hc_intr_mask.b.datatglerr = 1;
- hc_intr_mask.b.frmovrun = 1;
-
- if (_hc->ep_is_in) {
- hc_intr_mask.b.bblerr = 1;
- }
- if (_hc->error_state) {
- hc_intr_mask.b.ack = 1;
- }
- if (_hc->do_split) {
- if (_hc->complete_split) {
- hc_intr_mask.b.nyet = 1;
- }
- else {
- hc_intr_mask.b.ack = 1;
- }
- }
- break;
- case DWC_OTG_EP_TYPE_ISOC:
- hc_intr_mask.b.xfercompl = 1;
- hc_intr_mask.b.frmovrun = 1;
- hc_intr_mask.b.ack = 1;
-
- if (_hc->ep_is_in) {
- hc_intr_mask.b.xacterr = 1;
- hc_intr_mask.b.bblerr = 1;
- }
- break;
- }
- }
- dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
-
- /* Enable the top level host channel interrupt. */
- intr_enable = (1 << hc_num);
- dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
-
- /* Make sure host channel interrupts are enabled. */
- gintmsk.b.hcintr = 1;
- dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
-
- /*
- * Program the HCCHARn register with the endpoint characteristics for
- * the current transfer.
- */
- hcchar.d32 = 0;
- hcchar.b.devaddr = _hc->dev_addr;
- hcchar.b.epnum = _hc->ep_num;
- hcchar.b.epdir = _hc->ep_is_in;
- hcchar.b.lspddev = (_hc->speed == DWC_OTG_EP_SPEED_LOW);
- hcchar.b.eptype = _hc->ep_type;
- hcchar.b.mps = _hc->max_packet;
-
- dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
-
- DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
- DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr);
- DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum);
- DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir);
- DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
- DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype);
- DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
- DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt);
-
- /*
- * Program the HCSPLIT register for SPLITs
- */
- hcsplt.d32 = 0;
- if (_hc->do_split) {
- DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", _hc->hc_num,
- _hc->complete_split ? "CSPLIT" : "SSPLIT");
- hcsplt.b.compsplt = _hc->complete_split;
- hcsplt.b.xactpos = _hc->xact_pos;
- hcsplt.b.hubaddr = _hc->hub_addr;
- hcsplt.b.prtaddr = _hc->port_addr;
- DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", _hc->complete_split);
- DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", _hc->xact_pos);
- DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", _hc->hub_addr);
- DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", _hc->port_addr);
- DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", _hc->ep_is_in);
- DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
- DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", _hc->xfer_len);
- }
- dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
-
-}
-
-/**
- * Attempts to halt a host channel. This function should only be called in
- * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
- * normal circumstances in DMA mode, the controller halts the channel when the
- * transfer is complete or a condition occurs that requires application
- * intervention.
- *
- * In slave mode, checks for a free request queue entry, then sets the Channel
- * Enable and Channel Disable bits of the Host Channel Characteristics
- * register of the specified channel to intiate the halt. If there is no free
- * request queue entry, sets only the Channel Disable bit of the HCCHARn
- * register to flush requests for this channel. In the latter case, sets a
- * flag to indicate that the host channel needs to be halted when a request
- * queue slot is open.
- *
- * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
- * HCCHARn register. The controller ensures there is space in the request
- * queue before submitting the halt request.
- *
- * Some time may elapse before the core flushes any posted requests for this
- * host channel and halts. The Channel Halted interrupt handler completes the
- * deactivation of the host channel.
- *
- * @param _core_if Controller register interface.
- * @param _hc Host channel to halt.
- * @param _halt_status Reason for halting the channel.
- */
-void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
- dwc_hc_t *_hc,
- dwc_otg_halt_status_e _halt_status)
-{
- gnptxsts_data_t nptxsts;
- hptxsts_data_t hptxsts;
- hcchar_data_t hcchar;
- dwc_otg_hc_regs_t *hc_regs;
- dwc_otg_core_global_regs_t *global_regs;
- dwc_otg_host_global_regs_t *host_global_regs;
-
- hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
- global_regs = _core_if->core_global_regs;
- host_global_regs = _core_if->host_if->host_global_regs;
-
- WARN_ON(_halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
-
- if (_halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
- _halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
- /*
- * Disable all channel interrupts except Ch Halted. The QTD
- * and QH state associated with this transfer has been cleared
- * (in the case of URB_DEQUEUE), so the channel needs to be
- * shut down carefully to prevent crashes.
- */
- hcintmsk_data_t hcintmsk;
- hcintmsk.d32 = 0;
- hcintmsk.b.chhltd = 1;
- dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
-
- /*
- * Make sure no other interrupts besides halt are currently
- * pending. Handling another interrupt could cause a crash due
- * to the QTD and QH state.
- */
- dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
-
- /*
- * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
- * even if the channel was already halted for some other
- * reason.
- */
- _hc->halt_status = _halt_status;
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen == 0) {
- /*
- * The channel is either already halted or it hasn't
- * started yet. In DMA mode, the transfer may halt if
- * it finishes normally or a condition occurs that
- * requires driver intervention. Don't want to halt
- * the channel again. In either Slave or DMA mode,
- * it's possible that the transfer has been assigned
- * to a channel, but not started yet when an URB is
- * dequeued. Don't want to halt a channel that hasn't
- * started yet.
- */
- return;
- }
- }
-
- if (_hc->halt_pending) {
- /*
- * A halt has already been issued for this channel. This might
- * happen when a transfer is aborted by a higher level in
- * the stack.
- */
-#ifdef DEBUG
- DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
- __func__, _hc->hc_num);
-
-/* dwc_otg_dump_global_registers(_core_if); */
-/* dwc_otg_dump_host_registers(_core_if); */
-#endif
- return;
- }
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.chen = 1;
- hcchar.b.chdis = 1;
-
- if (!_core_if->dma_enable) {
- /* Check for space in the request queue to issue the halt. */
- if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
- _hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
- nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
- if (nptxsts.b.nptxqspcavail == 0) {
- hcchar.b.chen = 0;
- }
- } else {
- hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
- if ((hptxsts.b.ptxqspcavail == 0) || (_core_if->queuing_high_bandwidth)) {
- hcchar.b.chen = 0;
- }
- }
- }
-
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
- _hc->halt_status = _halt_status;
-
- if (hcchar.b.chen) {
- _hc->halt_pending = 1;
- _hc->halt_on_queue = 0;
- } else {
- _hc->halt_on_queue = 1;
- }
-
- DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
- DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32);
- DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", _hc->halt_pending);
- DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", _hc->halt_on_queue);
- DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", _hc->halt_status);
-
- return;
-}
-
-/**
- * Clears the transfer state for a host channel. This function is normally
- * called after a transfer is done and the host channel is being released.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _hc Identifies the host channel to clean up.
- */
-void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-{
- dwc_otg_hc_regs_t *hc_regs;
-
- _hc->xfer_started = 0;
-
- /*
- * Clear channel interrupt enables and any unhandled channel interrupt
- * conditions.
- */
- hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
- dwc_write_reg32(&hc_regs->hcintmsk, 0);
- dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
-
-#ifdef DEBUG
- del_timer(&_core_if->hc_xfer_timer[_hc->hc_num]);
- {
- hcchar_data_t hcchar;
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chdis) {
- DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
- __func__, _hc->hc_num, hcchar.d32);
- }
- }
-#endif
-}
-
-/**
- * Sets the channel property that indicates in which frame a periodic transfer
- * should occur. This is always set to the _next_ frame. This function has no
- * effect on non-periodic transfers.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _hc Identifies the host channel to set up and its properties.
- * @param _hcchar Current value of the HCCHAR register for the specified host
- * channel.
- */
-static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *_core_if,
- dwc_hc_t *_hc,
- hcchar_data_t *_hcchar)
-{
- if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- hfnum_data_t hfnum;
- hfnum.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hfnum);
- /* 1 if _next_ frame is odd, 0 if it's even */
- _hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
-#ifdef DEBUG
- if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR && _hc->do_split && !_hc->complete_split) {
- switch (hfnum.b.frnum & 0x7) {
- case 7:
- _core_if->hfnum_7_samples++;
- _core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
- break;
- case 0:
- _core_if->hfnum_0_samples++;
- _core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
- break;
- default:
- _core_if->hfnum_other_samples++;
- _core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
- break;
- }
- }
-#endif
- }
-}
-
-#ifdef DEBUG
-static void hc_xfer_timeout(unsigned long _ptr)
-{
- hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr;
- int hc_num = xfer_info->hc->hc_num;
- DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
- DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
-}
-#endif
-
-/*
- * This function does the setup for a data transfer for a host channel and
- * starts the transfer. May be called in either Slave mode or DMA mode. In
- * Slave mode, the caller must ensure that there is sufficient space in the
- * request queue and Tx Data FIFO.
- *
- * For an OUT transfer in Slave mode, it loads a data packet into the
- * appropriate FIFO. If necessary, additional data packets will be loaded in
- * the Host ISR.
- *
- * For an IN transfer in Slave mode, a data packet is requested. The data
- * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
- * additional data packets are requested in the Host ISR.
- *
- * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
- * register along with a packet count of 1 and the channel is enabled. This
- * causes a single PING transaction to occur. Other fields in HCTSIZ are
- * simply set to 0 since no data transfer occurs in this case.
- *
- * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
- * all the information required to perform the subsequent data transfer. In
- * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
- * controller performs the entire PING protocol, then starts the data
- * transfer.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _hc Information needed to initialize the host channel. The xfer_len
- * value may be reduced to accommodate the max widths of the XferSize and
- * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
- * to reflect the final xfer_len value.
- */
-void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-{
- hcchar_data_t hcchar;
- hctsiz_data_t hctsiz;
- uint16_t num_packets;
- uint32_t max_hc_xfer_size = _core_if->core_params->max_transfer_size;
- uint16_t max_hc_pkt_count = _core_if->core_params->max_packet_count;
- dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
-
- hctsiz.d32 = 0;
-
- if (_hc->do_ping) {
- if (!_core_if->dma_enable) {
- dwc_otg_hc_do_ping(_core_if, _hc);
- _hc->xfer_started = 1;
- return;
- } else {
- hctsiz.b.dopng = 1;
- }
- }
-
- if (_hc->do_split) {
- num_packets = 1;
-
- if (_hc->complete_split && !_hc->ep_is_in) {
- /* For CSPLIT OUT Transfer, set the size to 0 so the
- * core doesn't expect any data written to the FIFO */
- _hc->xfer_len = 0;
- } else if (_hc->ep_is_in || (_hc->xfer_len > _hc->max_packet)) {
- _hc->xfer_len = _hc->max_packet;
- } else if (!_hc->ep_is_in && (_hc->xfer_len > 188)) {
- _hc->xfer_len = 188;
- }
-
- hctsiz.b.xfersize = _hc->xfer_len;
- } else {
- /*
- * Ensure that the transfer length and packet count will fit
- * in the widths allocated for them in the HCTSIZn register.
- */
- if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- /*
- * Make sure the transfer size is no larger than one
- * (micro)frame's worth of data. (A check was done
- * when the periodic transfer was accepted to ensure
- * that a (micro)frame's worth of data can be
- * programmed into a channel.)
- */
- uint32_t max_periodic_len = _hc->multi_count * _hc->max_packet;
- if (_hc->xfer_len > max_periodic_len) {
- _hc->xfer_len = max_periodic_len;
- } else {
- }
- } else if (_hc->xfer_len > max_hc_xfer_size) {
- /* Make sure that xfer_len is a multiple of max packet size. */
- _hc->xfer_len = max_hc_xfer_size - _hc->max_packet + 1;
- }
-
- if (_hc->xfer_len > 0) {
- num_packets = (_hc->xfer_len + _hc->max_packet - 1) / _hc->max_packet;
- if (num_packets > max_hc_pkt_count) {
- num_packets = max_hc_pkt_count;
- _hc->xfer_len = num_packets * _hc->max_packet;
- }
- } else {
- /* Need 1 packet for transfer length of 0. */
- num_packets = 1;
- }
-
- if (_hc->ep_is_in) {
- /* Always program an integral # of max packets for IN transfers. */
- _hc->xfer_len = num_packets * _hc->max_packet;
- }
-
- if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- /*
- * Make sure that the multi_count field matches the
- * actual transfer length.
- */
- _hc->multi_count = num_packets;
-
- }
-
- if (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- /* Set up the initial PID for the transfer. */
- if (_hc->speed == DWC_OTG_EP_SPEED_HIGH) {
- if (_hc->ep_is_in) {
- if (_hc->multi_count == 1) {
- _hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
- } else if (_hc->multi_count == 2) {
- _hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
- } else {
- _hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
- }
- } else {
- if (_hc->multi_count == 1) {
- _hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
- } else {
- _hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
- }
- }
- } else {
- _hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
- }
- }
-
- hctsiz.b.xfersize = _hc->xfer_len;
- }
-
- _hc->start_pkt_count = num_packets;
- hctsiz.b.pktcnt = num_packets;
- hctsiz.b.pid = _hc->data_pid_start;
- dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
- DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
- DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
- DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt);
- DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
-
- if (_core_if->dma_enable) {
-#ifdef DEBUG
-if(((uint32_t)_hc->xfer_buff)%4)
-printk("dwc_otg_hc_start_transfer _hc->xfer_buff not 4 byte alignment\n");
-#endif
- dwc_write_reg32(&hc_regs->hcdma, (uint32_t)_hc->xfer_buff);
- }
-
- /* Start the split */
- if (_hc->do_split) {
- hcsplt_data_t hcsplt;
- hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
- hcsplt.b.spltena = 1;
- dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
- }
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.multicnt = _hc->multi_count;
- hc_set_even_odd_frame(_core_if, _hc, &hcchar);
-#ifdef DEBUG
- _core_if->start_hcchar_val[_hc->hc_num] = hcchar.d32;
- if (hcchar.b.chdis) {
- DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
- __func__, _hc->hc_num, hcchar.d32);
- }
-#endif
-
- /* Set host channel enable after all other setup is complete. */
- hcchar.b.chen = 1;
- hcchar.b.chdis = 0;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
- _hc->xfer_started = 1;
- _hc->requests++;
-
- if (!_core_if->dma_enable && !_hc->ep_is_in && _hc->xfer_len > 0) {
- /* Load OUT packet into the appropriate Tx FIFO. */
- dwc_otg_hc_write_packet(_core_if, _hc);
- }
-
-#ifdef DEBUG
- /* Start a timer for this transfer. */
- _core_if->hc_xfer_timer[_hc->hc_num].function = hc_xfer_timeout;
- _core_if->hc_xfer_info[_hc->hc_num].core_if = _core_if;
- _core_if->hc_xfer_info[_hc->hc_num].hc = _hc;
- _core_if->hc_xfer_timer[_hc->hc_num].data = (unsigned long)(&_core_if->hc_xfer_info[_hc->hc_num]);
- _core_if->hc_xfer_timer[_hc->hc_num].expires = jiffies + (HZ*10);
- add_timer(&_core_if->hc_xfer_timer[_hc->hc_num]);
-#endif
-}
-
-/**
- * This function continues a data transfer that was started by previous call
- * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
- * sufficient space in the request queue and Tx Data FIFO. This function
- * should only be called in Slave mode. In DMA mode, the controller acts
- * autonomously to complete transfers programmed to a host channel.
- *
- * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
- * if there is any data remaining to be queued. For an IN transfer, another
- * data packet is always requested. For the SETUP phase of a control transfer,
- * this function does nothing.
- *
- * @return 1 if a new request is queued, 0 if no more requests are required
- * for this transfer.
- */
-int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-{
- DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
-
- if (_hc->do_split) {
- /* SPLITs always queue just once per channel */
- return 0;
- } else if (_hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
- /* SETUPs are queued only once since they can't be NAKed. */
- return 0;
- } else if (_hc->ep_is_in) {
- /*
- * Always queue another request for other IN transfers. If
- * back-to-back INs are issued and NAKs are received for both,
- * the driver may still be processing the first NAK when the
- * second NAK is received. When the interrupt handler clears
- * the NAK interrupt for the first NAK, the second NAK will
- * not be seen. So we can't depend on the NAK interrupt
- * handler to requeue a NAKed request. Instead, IN requests
- * are issued each time this function is called. When the
- * transfer completes, the extra requests for the channel will
- * be flushed.
- */
- hcchar_data_t hcchar;
- dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hc_set_even_odd_frame(_core_if, _hc, &hcchar);
- hcchar.b.chen = 1;
- hcchar.b.chdis = 0;
- DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32);
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- _hc->requests++;
- return 1;
- } else {
- /* OUT transfers. */
- if (_hc->xfer_count < _hc->xfer_len) {
- if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- hcchar_data_t hcchar;
- dwc_otg_hc_regs_t *hc_regs;
- hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hc_set_even_odd_frame(_core_if, _hc, &hcchar);
- }
-
- /* Load OUT packet into the appropriate Tx FIFO. */
- dwc_otg_hc_write_packet(_core_if, _hc);
- _hc->requests++;
- return 1;
- } else {
- return 0;
- }
- }
-}
-
-/**
- * Starts a PING transfer. This function should only be called in Slave mode.
- * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
- */
-void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-{
- hcchar_data_t hcchar;
- hctsiz_data_t hctsiz;
- dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
-
- DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
-
- hctsiz.d32 = 0;
- hctsiz.b.dopng = 1;
- hctsiz.b.pktcnt = 1;
- dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.chen = 1;
- hcchar.b.chdis = 0;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-}
-
-/*
- * This function writes a packet into the Tx FIFO associated with the Host
- * Channel. For a channel associated with a non-periodic EP, the non-periodic
- * Tx FIFO is written. For a channel associated with a periodic EP, the
- * periodic Tx FIFO is written. This function should only be called in Slave
- * mode.
- *
- * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
- * then number of bytes written to the Tx FIFO.
- */
-void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-{
- uint32_t i;
- uint32_t remaining_count;
- uint32_t byte_count;
- uint32_t dword_count;
-
- uint32_t *data_buff = (uint32_t *)(_hc->xfer_buff);
- uint32_t *data_fifo = _core_if->data_fifo[_hc->hc_num];
-
- remaining_count = _hc->xfer_len - _hc->xfer_count;
- if (remaining_count > _hc->max_packet) {
- byte_count = _hc->max_packet;
- } else {
- byte_count = remaining_count;
- }
-
- dword_count = (byte_count + 3) / 4;
-
- if ((((unsigned long)data_buff) & 0x3) == 0) {
- /* xfer_buff is DWORD aligned. */
- for (i = 0; i < dword_count; i++, data_buff++) {
- dwc_write_reg32(data_fifo, *data_buff);
- }
- } else {
- /* xfer_buff is not DWORD aligned. */
- for (i = 0; i < dword_count; i++, data_buff++) {
- dwc_write_reg32(data_fifo, get_unaligned(data_buff));
- }
- }
-
- _hc->xfer_count += byte_count;
- _hc->xfer_buff += byte_count;
-}
-
-/**
- * Gets the current USB frame number. This is the frame number from the last
- * SOF packet.
- */
-uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if)
-{
- dsts_data_t dsts;
- dsts.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dsts);
-
- /* read current frame/microfreme number from DSTS register */
- return dsts.b.soffn;
-}
-
-/**
- * This function reads a setup packet from the Rx FIFO into the destination
- * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
- * Interrupt routine when a SETUP packet has been received in Slave mode.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _dest Destination buffer for packet data.
- */
-void dwc_otg_read_setup_packet(dwc_otg_core_if_t *_core_if, uint32_t *_dest)
-{
- /* Get the 8 bytes of a setup transaction data */
-
- /* Pop 2 DWORDS off the receive data FIFO into memory */
- _dest[0] = dwc_read_reg32(_core_if->data_fifo[0]);
- _dest[1] = dwc_read_reg32(_core_if->data_fifo[0]);
- //_dest[0] = dwc_read_datafifo32(_core_if->data_fifo[0]);
- //_dest[1] = dwc_read_datafifo32(_core_if->data_fifo[0]);
-}
-
-
-/**
- * This function enables EP0 OUT to receive SETUP packets and configures EP0
- * IN for transmitting packets. It is normally called when the
- * "Enumeration Done" interrupt occurs.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _ep The EP0 data.
- */
-void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-{
- dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
- dsts_data_t dsts;
- depctl_data_t diepctl;
- depctl_data_t doepctl;
- dctl_data_t dctl ={.d32=0};
-
- /* Read the Device Status and Endpoint 0 Control registers */
- dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
- diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
- doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
-
- /* Set the MPS of the IN EP based on the enumeration speed */
- switch (dsts.b.enumspd) {
- case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
- case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
- case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
- diepctl.b.mps = DWC_DEP0CTL_MPS_64;
- break;
- case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
- diepctl.b.mps = DWC_DEP0CTL_MPS_8;
- break;
- }
-
- dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
-
- /* Enable OUT EP for receive */
- doepctl.b.epena = 1;
- dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-
-#ifdef VERBOSE
- DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
- dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
- DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
- dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
-#endif
- dctl.b.cgnpinnak = 1;
- dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
- DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
- dwc_read_reg32(&dev_if->dev_global_regs->dctl));
-}
-
-/**
- * This function activates an EP. The Device EP control register for
- * the EP is configured as defined in the ep structure. Note: This
- * function is not used for EP0.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _ep The EP to activate.
- */
-void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-{
- dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
- depctl_data_t depctl;
- volatile uint32_t *addr;
- daint_data_t daintmsk = {.d32=0};
-
- DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, _ep->num,
- (_ep->is_in?"IN":"OUT"));
-
- /* Read DEPCTLn register */
- if (_ep->is_in == 1) {
- addr = &dev_if->in_ep_regs[_ep->num]->diepctl;
- daintmsk.ep.in = 1<<_ep->num;
- } else {
- addr = &dev_if->out_ep_regs[_ep->num]->doepctl;
- daintmsk.ep.out = 1<<_ep->num;
- }
-
- /* If the EP is already active don't change the EP Control
- * register. */
- depctl.d32 = dwc_read_reg32(addr);
- if (!depctl.b.usbactep) {
- depctl.b.mps = _ep->maxpacket;
- depctl.b.eptype = _ep->type;
- depctl.b.txfnum = _ep->tx_fifo_num;
-
- if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
- depctl.b.setd0pid = 1; // ???
- } else {
- depctl.b.setd0pid = 1;
- }
- depctl.b.usbactep = 1;
-
- dwc_write_reg32(addr, depctl.d32);
- DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr));
- }
-
-
- /* Enable the Interrupt for this EP */
- dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
- 0, daintmsk.d32);
- DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
- dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
- _ep->stall_clear_flag = 0;
- return;
-}
-
-/**
- * This function deactivates an EP. This is done by clearing the USB Active
- * EP bit in the Device EP control register. Note: This function is not used
- * for EP0. EP0 cannot be deactivated.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _ep The EP to deactivate.
- */
-void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-{
- depctl_data_t depctl ={.d32 = 0};
- volatile uint32_t *addr;
- daint_data_t daintmsk = {.d32=0};
-
- /* Read DEPCTLn register */
- if (_ep->is_in == 1) {
- addr = &_core_if->dev_if->in_ep_regs[_ep->num]->diepctl;
- daintmsk.ep.in = 1<<_ep->num;
- } else {
- addr = &_core_if->dev_if->out_ep_regs[_ep->num]->doepctl;
- daintmsk.ep.out = 1<<_ep->num;
- }
-
- depctl.b.usbactep = 0;
- dwc_write_reg32(addr, depctl.d32);
-
- /* Disable the Interrupt for this EP */
- dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->daintmsk,
- daintmsk.d32, 0);
-
- return;
-}
-
-/**
- * This function does the setup for a data transfer for an EP and
- * starts the transfer. For an IN transfer, the packets will be
- * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
- * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _ep The EP to start the transfer on.
- */
-void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-{
- /** @todo Refactor this funciton to check the transfer size
- * count value does not execed the number bits in the Transfer
- * count register. */
- depctl_data_t depctl;
- deptsiz_data_t deptsiz;
- gintmsk_data_t intr_mask = { .d32 = 0};
-
-#ifdef CHECK_PACKET_COUNTER_WIDTH
- const uint32_t MAX_XFER_SIZE =
- _core_if->core_params->max_transfer_size;
- const uint32_t MAX_PKT_COUNT =
- _core_if->core_params->max_packet_count;
- uint32_t num_packets;
- uint32_t transfer_len;
- dwc_otg_dev_out_ep_regs_t *out_regs =
- _core_if->dev_if->out_ep_regs[_ep->num];
- dwc_otg_dev_in_ep_regs_t *in_regs =
- _core_if->dev_if->in_ep_regs[_ep->num];
- gnptxsts_data_t txstatus;
-
- int lvl = SET_DEBUG_LEVEL(DBG_PCD);
-
-
- DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
- "xfer_buff=%p start_xfer_buff=%p\n",
- _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len,
- _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff);
-
- transfer_len = _ep->xfer_len - _ep->xfer_count;
- if (transfer_len > MAX_XFER_SIZE) {
- transfer_len = MAX_XFER_SIZE;
- }
- if (transfer_len == 0) {
- num_packets = 1;
- /* OUT EP to recieve Zero-length packet set transfer
- * size to maxpacket size. */
- if (!_ep->is_in) {
- transfer_len = _ep->maxpacket;
- }
- } else {
- num_packets =
- (transfer_len + _ep->maxpacket - 1) / _ep->maxpacket;
- if (num_packets > MAX_PKT_COUNT) {
- num_packets = MAX_PKT_COUNT;
- }
- }
- DWC_DEBUGPL(DBG_PCD, "transfer_len=%d #pckt=%d\n", transfer_len,
- num_packets);
-
- deptsiz.b.xfersize = transfer_len;
- deptsiz.b.pktcnt = num_packets;
-
- /* IN endpoint */
- if (_ep->is_in == 1) {
- depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
- } else {/* OUT endpoint */
- depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
- }
-
- /* EP enable, IN data in FIFO */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- /* IN endpoint */
- if (_ep->is_in == 1) {
- txstatus.d32 =
- dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
- if (txstatus.b.nptxqspcavail == 0) {
- DWC_DEBUGPL(DBG_ANY, "TX Queue Full (0x%0x)\n",
- txstatus.d32);
- return;
- }
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
- dwc_write_reg32(&in_regs->diepctl, depctl.d32);
- /**
- * Enable the Non-Periodic Tx FIFO empty interrupt, the
- * data will be written into the fifo by the ISR.
- */
- if (_core_if->dma_enable) {
- dwc_write_reg32(&in_regs->diepdma, (uint32_t) _ep->xfer_buff);
- } else {
- if (_core_if->en_multiple_tx_fifo == 0) {
- intr_mask.b.nptxfempty = 1;
- dwc_modify_reg32( &_core_if->core_global_regs->gintsts,
- intr_mask.d32, 0);
- dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
- intr_mask.d32, intr_mask.d32);
- } else {
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if (_ep->xfer_len > 0 &&
- _ep->type != DWC_OTG_EP_TYPE_ISOC) {
- uint32_t fifoemptymsk = 0;
- fifoemptymsk = (0x1 << _ep->num);
- dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->
- dtknqr4_fifoemptymsk,0, fifoemptymsk);
- }
- }
- }
- } else { /* OUT endpoint */
- dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
- dwc_write_reg32(&out_regs->doepctl, depctl.d32);
- if (_core_if->dma_enable) {
- dwc_write_reg32(&out_regs->doepdma,(uint32_t) _ep->xfer_buff);
- }
- }
- DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
- dwc_read_reg32(&out_regs->doepctl),
- dwc_read_reg32(&out_regs->doeptsiz));
- DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
- dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk),
- dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
-
- SET_DEBUG_LEVEL(lvl);
-#endif
- DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-
- DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
- "xfer_buff=%p start_xfer_buff=%p\n",
- _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len,
- _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff);
-
- /* IN endpoint */
- if (_ep->is_in == 1) {
- dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[_ep->num];
- gnptxsts_data_t gtxstatus;
- gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
- if (_core_if->en_multiple_tx_fifo == 0 &&
- gtxstatus.b.nptxqspcavail == 0) {
-#ifdef DEBUG
- DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
-#endif
- //return;
- MDELAY(100); //james
- }
-
- depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
- deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
-
- /* Zero Length Packet? */
- if (_ep->xfer_len == 0) {
- deptsiz.b.xfersize = 0;
- deptsiz.b.pktcnt = 1;
- } else {
-
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- deptsiz.b.xfersize = _ep->xfer_len;
- deptsiz.b.pktcnt = (_ep->xfer_len - 1 + _ep->maxpacket) / _ep->maxpacket;
- }
-
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-
- /* Write the DMA register */
- if (_core_if->dma_enable) {
-#if 1 // winder
- dma_cache_wback_inv((unsigned long) _ep->xfer_buff, _ep->xfer_len); // winder
- dwc_write_reg32 (&(in_regs->diepdma),
- CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder
-#else
- dwc_write_reg32 (&(in_regs->diepdma),
- (uint32_t)_ep->dma_addr);
-#endif
- } else {
- if (_ep->type != DWC_OTG_EP_TYPE_ISOC) {
- /**
- * Enable the Non-Periodic Tx FIFO empty interrupt,
- * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
- * the data will be written into the fifo by the ISR.
- */
- if (_core_if->en_multiple_tx_fifo == 0) {
- intr_mask.b.nptxfempty = 1;
- dwc_modify_reg32( &_core_if->core_global_regs->gintsts,
- intr_mask.d32, 0);
- dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
- intr_mask.d32, intr_mask.d32);
- } else {
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if (_ep->xfer_len > 0) {
- uint32_t fifoemptymsk = 0;
- fifoemptymsk = 1 << _ep->num;
- dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->
- dtknqr4_fifoemptymsk,0,fifoemptymsk);
- }
- }
- }
- }
-
- /* EP enable, IN data in FIFO */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
- if (_core_if->dma_enable) {
- depctl.d32 = dwc_read_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl);
- depctl.b.nextep = _ep->num;
- dwc_write_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
-
- }
- } else {
- /* OUT endpoint */
- dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num];
-
- depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
- deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
-
- /* Program the transfer size and packet count as follows:
- *
- * pktcnt = N
- * xfersize = N * maxpacket
- */
- if (_ep->xfer_len == 0) {
- /* Zero Length Packet */
- deptsiz.b.xfersize = _ep->maxpacket;
- deptsiz.b.pktcnt = 1;
- } else {
- deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket;
- deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket;
- }
- dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-
- DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
- _ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt);
-
- if (_core_if->dma_enable) {
-#if 1 // winder
- dwc_write_reg32 (&(out_regs->doepdma),
- CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder
-#else
- dwc_write_reg32 (&(out_regs->doepdma),
- (uint32_t)_ep->dma_addr);
-#endif
- }
-
- if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
- /** @todo NGS: dpid is read-only. Use setd0pid
- * or setd1pid. */
- if (_ep->even_odd_frame) {
- depctl.b.setd1pid = 1;
- } else {
- depctl.b.setd0pid = 1;
- }
- }
-
- /* EP enable */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
-
- dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-
- DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
- dwc_read_reg32(&out_regs->doepctl),
- dwc_read_reg32(&out_regs->doeptsiz));
- DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
- dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk),
- dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
- }
-}
-
-
-/**
- * This function does the setup for a data transfer for EP0 and starts
- * the transfer. For an IN transfer, the packets will be loaded into
- * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
- * unloaded from the Rx FIFO in the ISR.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _ep The EP0 data.
- */
-void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-{
- volatile depctl_data_t depctl;
- volatile deptsiz0_data_t deptsiz;
- gintmsk_data_t intr_mask = { .d32 = 0};
-
- DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
- "xfer_buff=%p start_xfer_buff=%p total_len=%d\n",
- _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len,
- _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff,
- _ep->total_len);
- _ep->total_len = _ep->xfer_len;
-
- /* IN endpoint */
- if (_ep->is_in == 1) {
- dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[0];
- gnptxsts_data_t gtxstatus;
- gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
- if (_core_if->en_multiple_tx_fifo == 0 &&
- gtxstatus.b.nptxqspcavail == 0) {
-#ifdef DEBUG
- deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
- DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
- dwc_read_reg32(&in_regs->diepctl));
- DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
- deptsiz.d32, deptsiz.b.xfersize,deptsiz.b.pktcnt);
- DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n", gtxstatus.d32);
-#endif /* */
- printk("TX Queue or FIFO Full!!!!\n"); // test-only
- //return;
- MDELAY(100); //james
- }
-
- depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
- deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-
- /* Zero Length Packet? */
- if (_ep->xfer_len == 0) {
- deptsiz.b.xfersize = 0;
- deptsiz.b.pktcnt = 1;
- } else {
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- if (_ep->xfer_len > _ep->maxpacket) {
- _ep->xfer_len = _ep->maxpacket;
- deptsiz.b.xfersize = _ep->maxpacket;
- }
- else {
- deptsiz.b.xfersize = _ep->xfer_len;
- }
- deptsiz.b.pktcnt = 1;
-
- }
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
- DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
- _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt, deptsiz.d32);
-
- /* Write the DMA register */
- if (_core_if->dma_enable) {
- dwc_write_reg32(&(in_regs->diepdma), (uint32_t) _ep->dma_addr);
- }
-
- /* EP enable, IN data in FIFO */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
- /**
- * Enable the Non-Periodic Tx FIFO empty interrupt, the
- * data will be written into the fifo by the ISR.
- */
- if (!_core_if->dma_enable) {
- if (_core_if->en_multiple_tx_fifo == 0) {
- intr_mask.b.nptxfempty = 1;
- dwc_modify_reg32(&_core_if->core_global_regs->gintsts, intr_mask.d32, 0);
- dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, intr_mask.d32,
- intr_mask.d32);
- } else {
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if (_ep->xfer_len > 0) {
- uint32_t fifoemptymsk = 0;
- fifoemptymsk |= 1 << _ep->num;
- dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
- 0, fifoemptymsk);
- }
-
- }
- }
- } else {
- /* OUT endpoint */
- dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num];
-
- depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
- deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
-
- /* Program the transfer size and packet count as follows:
- * xfersize = N * (maxpacket + 4 - (maxpacket % 4))
- * pktcnt = N */
- if (_ep->xfer_len == 0) {
- /* Zero Length Packet */
- deptsiz.b.xfersize = _ep->maxpacket;
- deptsiz.b.pktcnt = 1;
- } else {
- deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket;
- deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket;
- }
-
- dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
- DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n",
- _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt);
-
- if (_core_if->dma_enable) {
- dwc_write_reg32(&(out_regs->doepdma), (uint32_t) _ep->dma_addr);
- }
-
- /* EP enable */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
- }
-}
-
-/**
- * This function continues control IN transfers started by
- * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
- * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
- * bit for the packet count.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _ep The EP0 data.
- */
-void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-{
- depctl_data_t depctl;
- deptsiz0_data_t deptsiz;
- gintmsk_data_t intr_mask = { .d32 = 0};
-
- if (_ep->is_in == 1) {
- dwc_otg_dev_in_ep_regs_t *in_regs =
- _core_if->dev_if->in_ep_regs[0];
- gnptxsts_data_t tx_status = {.d32 = 0};
-
- tx_status.d32 = dwc_read_reg32( &_core_if->core_global_regs->gnptxsts );
- /** @todo Should there be check for room in the Tx
- * Status Queue. If not remove the code above this comment. */
-
- depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
- deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- deptsiz.b.xfersize = (_ep->total_len - _ep->xfer_count) > _ep->maxpacket ? _ep->maxpacket :
- (_ep->total_len - _ep->xfer_count);
- deptsiz.b.pktcnt = 1;
- _ep->xfer_len += deptsiz.b.xfersize;
-
- dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
- DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
- _ep->xfer_len,
- deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-
- /* Write the DMA register */
- if (_core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
- dwc_write_reg32 (&(in_regs->diepdma),
- CPHYSADDR((uint32_t)_ep->dma_addr)); // winder
- }
-
- /* EP enable, IN data in FIFO */
- depctl.b.cnak = 1;
- depctl.b.epena = 1;
- dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-
- /**
- * Enable the Non-Periodic Tx FIFO empty interrupt, the
- * data will be written into the fifo by the ISR.
- */
- if (!_core_if->dma_enable) {
- /* First clear it from GINTSTS */
- intr_mask.b.nptxfempty = 1;
- dwc_write_reg32( &_core_if->core_global_regs->gintsts,
- intr_mask.d32 );
-
- dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
- intr_mask.d32, intr_mask.d32);
- }
-
- }
-
-}
-
-#ifdef DEBUG
-void dump_msg(const u8 *buf, unsigned int length)
-{
- unsigned int start, num, i;
- char line[52], *p;
-
- if (length >= 512)
- return;
- start = 0;
- while (length > 0) {
- num = min(length, 16u);
- p = line;
- for (i = 0; i < num; ++i) {
- if (i == 8)
- *p++ = ' ';
- sprintf(p, " %02x", buf[i]);
- p += 3;
- }
- *p = 0;
- DWC_PRINT( "%6x: %s\n", start, line);
- buf += num;
- start += num;
- length -= num;
- }
-}
-#else
-static inline void dump_msg(const u8 *buf, unsigned int length)
-{
-}
-#endif
-
-/**
- * This function writes a packet into the Tx FIFO associated with the
- * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For
- * periodic EPs the periodic Tx FIFO associated with the EP is written
- * with all packets for the next micro-frame.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _ep The EP to write packet for.
- * @param _dma Indicates if DMA is being used.
- */
-void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma)
-{
- /**
- * The buffer is padded to DWORD on a per packet basis in
- * slave/dma mode if the MPS is not DWORD aligned. The last
- * packet, if short, is also padded to a multiple of DWORD.
- *
- * ep->xfer_buff always starts DWORD aligned in memory and is a
- * multiple of DWORD in length
- *
- * ep->xfer_len can be any number of bytes
- *
- * ep->xfer_count is a multiple of ep->maxpacket until the last
- * packet
- *
- * FIFO access is DWORD */
-
- uint32_t i;
- uint32_t byte_count;
- uint32_t dword_count;
- uint32_t *fifo;
- uint32_t *data_buff = (uint32_t *)_ep->xfer_buff;
-
- //DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, _core_if, _ep);
- if (_ep->xfer_count >= _ep->xfer_len) {
- DWC_WARN("%s() No data for EP%d!!!\n", __func__, _ep->num);
- return;
- }
-
- /* Find the byte length of the packet either short packet or MPS */
- if ((_ep->xfer_len - _ep->xfer_count) < _ep->maxpacket) {
- byte_count = _ep->xfer_len - _ep->xfer_count;
- }
- else {
- byte_count = _ep->maxpacket;
- }
-
- /* Find the DWORD length, padded by extra bytes as neccessary if MPS
- * is not a multiple of DWORD */
- dword_count = (byte_count + 3) / 4;
-
-#ifdef VERBOSE
- dump_msg(_ep->xfer_buff, byte_count);
-#endif
- if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
- /**@todo NGS Where are the Periodic Tx FIFO addresses
- * intialized? What should this be? */
- fifo = _core_if->data_fifo[_ep->tx_fifo_num];
- } else {
- fifo = _core_if->data_fifo[_ep->num];
- }
-
- DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n",
- fifo, data_buff, *data_buff, byte_count);
-
-
- if (!_dma) {
- for (i=0; i<dword_count; i++, data_buff++) {
- dwc_write_reg32( fifo, *data_buff );
- }
- }
-
- _ep->xfer_count += byte_count;
- _ep->xfer_buff += byte_count;
-#if 1 // winder, why do we need this??
- _ep->dma_addr += byte_count;
-#endif
-}
-
-/**
- * Set the EP STALL.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _ep The EP to set the stall on.
- */
-void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-{
- depctl_data_t depctl;
- volatile uint32_t *depctl_addr;
-
- DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num,
- (_ep->is_in?"IN":"OUT"));
-
- if (_ep->is_in == 1) {
- depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl);
- depctl.d32 = dwc_read_reg32(depctl_addr);
-
- /* set the disable and stall bits */
- if (depctl.b.epena) {
- depctl.b.epdis = 1;
- }
- depctl.b.stall = 1;
- dwc_write_reg32(depctl_addr, depctl.d32);
-
- } else {
- depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl);
- depctl.d32 = dwc_read_reg32(depctl_addr);
-
- /* set the stall bit */
- depctl.b.stall = 1;
- dwc_write_reg32(depctl_addr, depctl.d32);
- }
- DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
- return;
-}
-
-/**
- * Clear the EP STALL.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _ep The EP to clear stall from.
- */
-void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-{
- depctl_data_t depctl;
- volatile uint32_t *depctl_addr;
-
- DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num,
- (_ep->is_in?"IN":"OUT"));
-
- if (_ep->is_in == 1) {
- depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl);
- } else {
- depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl);
- }
-
- depctl.d32 = dwc_read_reg32(depctl_addr);
-
- /* clear the stall bits */
- depctl.b.stall = 0;
-
- /*
- * USB Spec 9.4.5: For endpoints using data toggle, regardless
- * of whether an endpoint has the Halt feature set, a
- * ClearFeature(ENDPOINT_HALT) request always results in the
- * data toggle being reinitialized to DATA0.
- */
- if (_ep->type == DWC_OTG_EP_TYPE_INTR ||
- _ep->type == DWC_OTG_EP_TYPE_BULK) {
- depctl.b.setd0pid = 1; /* DATA0 */
- }
-
- dwc_write_reg32(depctl_addr, depctl.d32);
- DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
- return;
-}
-
-/**
- * This function reads a packet from the Rx FIFO into the destination
- * buffer. To read SETUP data use dwc_otg_read_setup_packet.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _dest Destination buffer for the packet.
- * @param _bytes Number of bytes to copy to the destination.
- */
-void dwc_otg_read_packet(dwc_otg_core_if_t *_core_if,
- uint8_t *_dest,
- uint16_t _bytes)
-{
- int i;
- int word_count = (_bytes + 3) / 4;
-
- volatile uint32_t *fifo = _core_if->data_fifo[0];
- uint32_t *data_buff = (uint32_t *)_dest;
-
- /**
- * @todo Account for the case where _dest is not dword aligned. This
- * requires reading data from the FIFO into a uint32_t temp buffer,
- * then moving it into the data buffer.
- */
-
- DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
- _core_if, _dest, _bytes);
-
- for (i=0; i<word_count; i++, data_buff++) {
- *data_buff = dwc_read_reg32(fifo);
- }
-
- return;
-}
-
-
-#ifdef DEBUG
-/**
- * This functions reads the device registers and prints them
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if)
-{
- int i;
- volatile uint32_t *addr;
-
- DWC_PRINT("Device Global Registers\n");
- addr=&_core_if->dev_if->dev_global_regs->dcfg;
- DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->dev_global_regs->dctl;
- DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->dev_global_regs->dsts;
- DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->dev_global_regs->diepmsk;
- DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->dev_global_regs->doepmsk;
- DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->dev_global_regs->daint;
- DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->dev_global_regs->dtknqr1;
- DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- if (_core_if->hwcfg2.b.dev_token_q_depth > 6) {
- addr=&_core_if->dev_if->dev_global_regs->dtknqr2;
- DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n",
- (uint32_t)addr,dwc_read_reg32(addr));
- }
-
- addr=&_core_if->dev_if->dev_global_regs->dvbusdis;
- DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
- addr=&_core_if->dev_if->dev_global_regs->dvbuspulse;
- DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n",
- (uint32_t)addr,dwc_read_reg32(addr));
-
- if (_core_if->hwcfg2.b.dev_token_q_depth > 14) {
- addr = &_core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
- DWC_PRINT("DTKNQR3 @0x%08X : 0x%08X\n",
- (uint32_t)addr, dwc_read_reg32(addr));
- }
-
- if (_core_if->hwcfg2.b.dev_token_q_depth > 22) {
- addr = &_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
- DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", (uint32_t) addr,
- dwc_read_reg32(addr));
- }
- for (i = 0; i <= _core_if->dev_if->num_in_eps; i++) {
- DWC_PRINT("Device IN EP %d Registers\n", i);
- addr=&_core_if->dev_if->in_ep_regs[i]->diepctl;
- DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->in_ep_regs[i]->diepint;
- DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->in_ep_regs[i]->dieptsiz;
- DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->in_ep_regs[i]->diepdma;
- DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
-addr = &_core_if->dev_if->in_ep_regs[i]->dtxfsts;
- DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n", (uint32_t) addr,
- dwc_read_reg32(addr));
- }
- for (i = 0; i <= _core_if->dev_if->num_out_eps; i++) {
- DWC_PRINT("Device OUT EP %d Registers\n", i);
- addr=&_core_if->dev_if->out_ep_regs[i]->doepctl;
- DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->out_ep_regs[i]->doepfn;
- DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->out_ep_regs[i]->doepint;
- DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->out_ep_regs[i]->doeptsiz;
- DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->dev_if->out_ep_regs[i]->doepdma;
- DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- }
- return;
-}
-
-/**
- * This function reads the host registers and prints them
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if)
-{
- int i;
- volatile uint32_t *addr;
-
- DWC_PRINT("Host Global Registers\n");
- addr=&_core_if->host_if->host_global_regs->hcfg;
- DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->host_if->host_global_regs->hfir;
- DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->host_if->host_global_regs->hfnum;
- DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->host_if->host_global_regs->hptxsts;
- DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->host_if->host_global_regs->haint;
- DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->host_if->host_global_regs->haintmsk;
- DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=_core_if->host_if->hprt0;
- DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
- for (i=0; i<_core_if->core_params->host_channels; i++) {
- DWC_PRINT("Host Channel %d Specific Registers\n", i);
- addr=&_core_if->host_if->hc_regs[i]->hcchar;
- DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->host_if->hc_regs[i]->hcsplt;
- DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->host_if->hc_regs[i]->hcint;
- DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->host_if->hc_regs[i]->hcintmsk;
- DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->host_if->hc_regs[i]->hctsiz;
- DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->host_if->hc_regs[i]->hcdma;
- DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
- }
- return;
-}
-
-/**
- * This function reads the core global registers and prints them
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if)
-{
- int i;
- volatile uint32_t *addr;
-
- DWC_PRINT("Core Global Registers\n");
- addr=&_core_if->core_global_regs->gotgctl;
- DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->gotgint;
- DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->gahbcfg;
- DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->gusbcfg;
- DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->grstctl;
- DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->gintsts;
- DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->gintmsk;
- DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->grxstsr;
- DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- //addr=&_core_if->core_global_regs->grxstsp;
- //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->grxfsiz;
- DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->gnptxfsiz;
- DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->gnptxsts;
- DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->gi2cctl;
- DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->gpvndctl;
- DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->ggpio;
- DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->guid;
- DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->gsnpsid;
- DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->ghwcfg1;
- DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->ghwcfg2;
- DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->ghwcfg3;
- DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->ghwcfg4;
- DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
- addr=&_core_if->core_global_regs->hptxfsiz;
- DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-
- for (i=0; i<_core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
- addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
- DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr));
- }
-
-}
-#endif
-
-/**
- * Flush a Tx FIFO.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _num Tx FIFO to flush.
- */
-extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
- const int _num )
-{
- dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
- volatile grstctl_t greset = { .d32 = 0};
- int count = 0;
-
- DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num);
-
- greset.b.txfflsh = 1;
- greset.b.txfnum = _num;
- dwc_write_reg32( &global_regs->grstctl, greset.d32 );
-
- do {
- greset.d32 = dwc_read_reg32( &global_regs->grstctl);
- if (++count > 10000){
- DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
- __func__, greset.d32,
- dwc_read_reg32( &global_regs->gnptxsts));
- break;
- }
-
- udelay(1);
- } while (greset.b.txfflsh == 1);
- /* Wait for 3 PHY Clocks*/
- UDELAY(1);
-}
-
-/**
- * Flush Rx FIFO.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if )
-{
- dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
- volatile grstctl_t greset = { .d32 = 0};
- int count = 0;
-
- DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
- /*
- *
- */
- greset.b.rxfflsh = 1;
- dwc_write_reg32( &global_regs->grstctl, greset.d32 );
-
- do {
- greset.d32 = dwc_read_reg32( &global_regs->grstctl);
- if (++count > 10000){
- DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
- greset.d32);
- break;
- }
- } while (greset.b.rxfflsh == 1);
- /* Wait for 3 PHY Clocks*/
- UDELAY(1);
-}
-
-/**
- * Do core a soft reset of the core. Be careful with this because it
- * resets all the internal state machines of the core.
- */
-
-void dwc_otg_core_reset(dwc_otg_core_if_t *_core_if)
-{
- dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
- volatile grstctl_t greset = { .d32 = 0};
- int count = 0;
-
- DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
- /* Wait for AHB master IDLE state. */
- do {
- UDELAY(10);
- greset.d32 = dwc_read_reg32( &global_regs->grstctl);
- if (++count > 100000){
- DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__,
- greset.d32, greset.b.ahbidle);
- return;
- }
- } while (greset.b.ahbidle == 0);
-
-// winder add.
-#if 1
- /* Note: Actually, I don't exactly why we need to put delay here. */
- MDELAY(100);
-#endif
- /* Core Soft Reset */
- count = 0;
- greset.b.csftrst = 1;
- dwc_write_reg32( &global_regs->grstctl, greset.d32 );
-// winder add.
-#if 1
- /* Note: Actually, I don't exactly why we need to put delay here. */
- MDELAY(100);
-#endif
- do {
- greset.d32 = dwc_read_reg32( &global_regs->grstctl);
- if (++count > 10000){
- DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
- greset.d32);
- break;
- }
- udelay(1);
- } while (greset.b.csftrst == 1);
- /* Wait for 3 PHY Clocks*/
- //DWC_PRINT("100ms\n");
- MDELAY(100);
-}
-
-
-
-/**
- * Register HCD callbacks. The callbacks are used to start and stop
- * the HCD for interrupt processing.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _cb the HCD callback structure.
- * @param _p pointer to be passed to callback function (usb_hcd*).
- */
-extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
- dwc_otg_cil_callbacks_t *_cb,
- void *_p)
-{
- _core_if->hcd_cb = _cb;
- _cb->p = _p;
-}
-
-/**
- * Register PCD callbacks. The callbacks are used to start and stop
- * the PCD for interrupt processing.
- *
- * @param _core_if Programming view of DWC_otg controller.
- * @param _cb the PCD callback structure.
- * @param _p pointer to be passed to callback function (pcd*).
- */
-extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
- dwc_otg_cil_callbacks_t *_cb,
- void *_p)
-{
- _core_if->pcd_cb = _cb;
- _cb->p = _p;
-}
-
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil.h b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil.h
deleted file mode 100644
index bbb9516b85..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil.h
+++ /dev/null
@@ -1,911 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.h $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 631780 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#if !defined(__DWC_CIL_H__)
-#define __DWC_CIL_H__
-
-#include "dwc_otg_plat.h"
-
-#include "dwc_otg_regs.h"
-#ifdef DEBUG
-#include "linux/timer.h"
-#endif
-
-/* the OTG capabilities. */
-#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
-#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
-#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
-/* the maximum speed of operation in host and device mode. */
-#define DWC_SPEED_PARAM_HIGH 0
-#define DWC_SPEED_PARAM_FULL 1
-/* the PHY clock rate in low power mode when connected to a
- * Low Speed device in host mode. */
-#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
-#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
-/* the type of PHY interface to use. */
-#define DWC_PHY_TYPE_PARAM_FS 0
-#define DWC_PHY_TYPE_PARAM_UTMI 1
-#define DWC_PHY_TYPE_PARAM_ULPI 2
-/* whether to use the internal or external supply to
- * drive the vbus with a ULPI phy. */
-#define DWC_PHY_ULPI_INTERNAL_VBUS 0
-#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
-/* EP type. */
-
-/**
- * @file
- * This file contains the interface to the Core Interface Layer.
- */
-
-/**
- * The <code>dwc_ep</code> structure represents the state of a single
- * endpoint when acting in device mode. It contains the data items
- * needed for an endpoint to be activated and transfer packets.
- */
-typedef struct dwc_ep {
- /** EP number used for register address lookup */
- uint8_t num;
- /** EP direction 0 = OUT */
- unsigned is_in : 1;
- /** EP active. */
- unsigned active : 1;
-
- /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
- If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
- unsigned tx_fifo_num : 4;
- /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */
- unsigned type : 2;
-#define DWC_OTG_EP_TYPE_CONTROL 0
-#define DWC_OTG_EP_TYPE_ISOC 1
-#define DWC_OTG_EP_TYPE_BULK 2
-#define DWC_OTG_EP_TYPE_INTR 3
-
- /** DATA start PID for INTR and BULK EP */
- unsigned data_pid_start : 1;
- /** Frame (even/odd) for ISOC EP */
- unsigned even_odd_frame : 1;
- /** Max Packet bytes */
- unsigned maxpacket : 11;
-
- /** @name Transfer state */
- /** @{ */
-
- /**
- * Pointer to the beginning of the transfer buffer -- do not modify
- * during transfer.
- */
-
- uint32_t dma_addr;
-
- uint8_t *start_xfer_buff;
- /** pointer to the transfer buffer */
- uint8_t *xfer_buff;
- /** Number of bytes to transfer */
- unsigned xfer_len : 19;
- /** Number of bytes transferred. */
- unsigned xfer_count : 19;
- /** Sent ZLP */
- unsigned sent_zlp : 1;
- /** Total len for control transfer */
- unsigned total_len : 19;
-
- /** stall clear flag */
- unsigned stall_clear_flag : 1;
-
- /** @} */
-} dwc_ep_t;
-
-/*
- * Reasons for halting a host channel.
- */
-typedef enum dwc_otg_halt_status {
- DWC_OTG_HC_XFER_NO_HALT_STATUS,
- DWC_OTG_HC_XFER_COMPLETE,
- DWC_OTG_HC_XFER_URB_COMPLETE,
- DWC_OTG_HC_XFER_ACK,
- DWC_OTG_HC_XFER_NAK,
- DWC_OTG_HC_XFER_NYET,
- DWC_OTG_HC_XFER_STALL,
- DWC_OTG_HC_XFER_XACT_ERR,
- DWC_OTG_HC_XFER_FRAME_OVERRUN,
- DWC_OTG_HC_XFER_BABBLE_ERR,
- DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
- DWC_OTG_HC_XFER_AHB_ERR,
- DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
- DWC_OTG_HC_XFER_URB_DEQUEUE
-} dwc_otg_halt_status_e;
-
-/**
- * Host channel descriptor. This structure represents the state of a single
- * host channel when acting in host mode. It contains the data items needed to
- * transfer packets to an endpoint via a host channel.
- */
-typedef struct dwc_hc {
- /** Host channel number used for register address lookup */
- uint8_t hc_num;
-
- /** Device to access */
- unsigned dev_addr : 7;
-
- /** EP to access */
- unsigned ep_num : 4;
-
- /** EP direction. 0: OUT, 1: IN */
- unsigned ep_is_in : 1;
-
- /**
- * EP speed.
- * One of the following values:
- * - DWC_OTG_EP_SPEED_LOW
- * - DWC_OTG_EP_SPEED_FULL
- * - DWC_OTG_EP_SPEED_HIGH
- */
- unsigned speed : 2;
-#define DWC_OTG_EP_SPEED_LOW 0
-#define DWC_OTG_EP_SPEED_FULL 1
-#define DWC_OTG_EP_SPEED_HIGH 2
-
- /**
- * Endpoint type.
- * One of the following values:
- * - DWC_OTG_EP_TYPE_CONTROL: 0
- * - DWC_OTG_EP_TYPE_ISOC: 1
- * - DWC_OTG_EP_TYPE_BULK: 2
- * - DWC_OTG_EP_TYPE_INTR: 3
- */
- unsigned ep_type : 2;
-
- /** Max packet size in bytes */
- unsigned max_packet : 11;
-
- /**
- * PID for initial transaction.
- * 0: DATA0,<br>
- * 1: DATA2,<br>
- * 2: DATA1,<br>
- * 3: MDATA (non-Control EP),
- * SETUP (Control EP)
- */
- unsigned data_pid_start : 2;
-#define DWC_OTG_HC_PID_DATA0 0
-#define DWC_OTG_HC_PID_DATA2 1
-#define DWC_OTG_HC_PID_DATA1 2
-#define DWC_OTG_HC_PID_MDATA 3
-#define DWC_OTG_HC_PID_SETUP 3
-
- /** Number of periodic transactions per (micro)frame */
- unsigned multi_count: 2;
-
- /** @name Transfer State */
- /** @{ */
-
- /** Pointer to the current transfer buffer position. */
- uint8_t *xfer_buff;
- /** Total number of bytes to transfer. */
- uint32_t xfer_len;
- /** Number of bytes transferred so far. */
- uint32_t xfer_count;
- /** Packet count at start of transfer.*/
- uint16_t start_pkt_count;
-
- /**
- * Flag to indicate whether the transfer has been started. Set to 1 if
- * it has been started, 0 otherwise.
- */
- uint8_t xfer_started;
-
- /**
- * Set to 1 to indicate that a PING request should be issued on this
- * channel. If 0, process normally.
- */
- uint8_t do_ping;
-
- /**
- * Set to 1 to indicate that the error count for this transaction is
- * non-zero. Set to 0 if the error count is 0.
- */
- uint8_t error_state;
-
- /**
- * Set to 1 to indicate that this channel should be halted the next
- * time a request is queued for the channel. This is necessary in
- * slave mode if no request queue space is available when an attempt
- * is made to halt the channel.
- */
- uint8_t halt_on_queue;
-
- /**
- * Set to 1 if the host channel has been halted, but the core is not
- * finished flushing queued requests. Otherwise 0.
- */
- uint8_t halt_pending;
-
- /**
- * Reason for halting the host channel.
- */
- dwc_otg_halt_status_e halt_status;
-
- /*
- * Split settings for the host channel
- */
- uint8_t do_split; /**< Enable split for the channel */
- uint8_t complete_split; /**< Enable complete split */
- uint8_t hub_addr; /**< Address of high speed hub */
-
- uint8_t port_addr; /**< Port of the low/full speed device */
- /** Split transaction position
- * One of the following values:
- * - DWC_HCSPLIT_XACTPOS_MID
- * - DWC_HCSPLIT_XACTPOS_BEGIN
- * - DWC_HCSPLIT_XACTPOS_END
- * - DWC_HCSPLIT_XACTPOS_ALL */
- uint8_t xact_pos;
-
- /** Set when the host channel does a short read. */
- uint8_t short_read;
-
- /**
- * Number of requests issued for this channel since it was assigned to
- * the current transfer (not counting PINGs).
- */
- uint8_t requests;
-
- /**
- * Queue Head for the transfer being processed by this channel.
- */
- struct dwc_otg_qh *qh;
-
- /** @} */
-
- /** Entry in list of host channels. */
- struct list_head hc_list_entry;
-} dwc_hc_t;
-
-/**
- * The following parameters may be specified when starting the module. These
- * parameters define how the DWC_otg controller should be configured.
- * Parameter values are passed to the CIL initialization function
- * dwc_otg_cil_init.
- */
-
-typedef struct dwc_otg_core_params
-{
- int32_t opt;
-//#define dwc_param_opt_default 1
- /**
- * Specifies the OTG capabilities. The driver will automatically
- * detect the value for this parameter if none is specified.
- * 0 - HNP and SRP capable (default)
- * 1 - SRP Only capable
- * 2 - No HNP/SRP capable
- */
- int32_t otg_cap;
-#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
-#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
-#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
-//#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
- /**
- * Specifies whether to use slave or DMA mode for accessing the data
- * FIFOs. The driver will automatically detect the value for this
- * parameter if none is specified.
- * 0 - Slave
- * 1 - DMA (default, if available)
- */
- int32_t dma_enable;
-//#define dwc_param_dma_enable_default 1
- /** The DMA Burst size (applicable only for External DMA
- * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
- */
- int32_t dma_burst_size; /* Translate this to GAHBCFG values */
-//#define dwc_param_dma_burst_size_default 32
- /**
- * Specifies the maximum speed of operation in host and device mode.
- * The actual speed depends on the speed of the attached device and
- * the value of phy_type. The actual speed depends on the speed of the
- * attached device.
- * 0 - High Speed (default)
- * 1 - Full Speed
- */
- int32_t speed;
-//#define dwc_param_speed_default 0
-#define DWC_SPEED_PARAM_HIGH 0
-#define DWC_SPEED_PARAM_FULL 1
-
- /** Specifies whether low power mode is supported when attached
- * to a Full Speed or Low Speed device in host mode.
- * 0 - Don't support low power mode (default)
- * 1 - Support low power mode
- */
- int32_t host_support_fs_ls_low_power;
-//#define dwc_param_host_support_fs_ls_low_power_default 0
- /** Specifies the PHY clock rate in low power mode when connected to a
- * Low Speed device in host mode. This parameter is applicable only if
- * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
- * then defaults to 6 MHZ otherwise 48 MHZ.
- *
- * 0 - 48 MHz
- * 1 - 6 MHz
- */
- int32_t host_ls_low_power_phy_clk;
-//#define dwc_param_host_ls_low_power_phy_clk_default 0
-#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
-#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
- /**
- * 0 - Use cC FIFO size parameters
- * 1 - Allow dynamic FIFO sizing (default)
- */
- int32_t enable_dynamic_fifo;
-//#define dwc_param_enable_dynamic_fifo_default 1
- /** Total number of 4-byte words in the data FIFO memory. This
- * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
- * Tx FIFOs.
- * 32 to 32768 (default 8192)
- * Note: The total FIFO memory depth in the FPGA configuration is 8192.
- */
- int32_t data_fifo_size;
-//#define dwc_param_data_fifo_size_default 8192
- /** Number of 4-byte words in the Rx FIFO in device mode when dynamic
- * FIFO sizing is enabled.
- * 16 to 32768 (default 1064)
- */
- int32_t dev_rx_fifo_size;
-//#define dwc_param_dev_rx_fifo_size_default 1064
- /** Number of 4-byte words in the non-periodic Tx FIFO in device mode
- * when dynamic FIFO sizing is enabled.
- * 16 to 32768 (default 1024)
- */
- int32_t dev_nperio_tx_fifo_size;
-//#define dwc_param_dev_nperio_tx_fifo_size_default 1024
- /** Number of 4-byte words in each of the periodic Tx FIFOs in device
- * mode when dynamic FIFO sizing is enabled.
- * 4 to 768 (default 256)
- */
- uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
-//#define dwc_param_dev_perio_tx_fifo_size_default 256
- /** Number of 4-byte words in the Rx FIFO in host mode when dynamic
- * FIFO sizing is enabled.
- * 16 to 32768 (default 1024)
- */
- int32_t host_rx_fifo_size;
-//#define dwc_param_host_rx_fifo_size_default 1024
- /** Number of 4-byte words in the non-periodic Tx FIFO in host mode
- * when Dynamic FIFO sizing is enabled in the core.
- * 16 to 32768 (default 1024)
- */
- int32_t host_nperio_tx_fifo_size;
-//#define dwc_param_host_nperio_tx_fifo_size_default 1024
- /** Number of 4-byte words in the host periodic Tx FIFO when dynamic
- * FIFO sizing is enabled.
- * 16 to 32768 (default 1024)
- */
- int32_t host_perio_tx_fifo_size;
-//#define dwc_param_host_perio_tx_fifo_size_default 1024
- /** The maximum transfer size supported in bytes.
- * 2047 to 65,535 (default 65,535)
- */
- int32_t max_transfer_size;
-//#define dwc_param_max_transfer_size_default 65535
- /** The maximum number of packets in a transfer.
- * 15 to 511 (default 511)
- */
- int32_t max_packet_count;
-//#define dwc_param_max_packet_count_default 511
- /** The number of host channel registers to use.
- * 1 to 16 (default 12)
- * Note: The FPGA configuration supports a maximum of 12 host channels.
- */
- int32_t host_channels;
-//#define dwc_param_host_channels_default 12
- /** The number of endpoints in addition to EP0 available for device
- * mode operations.
- * 1 to 15 (default 6 IN and OUT)
- * Note: The FPGA configuration supports a maximum of 6 IN and OUT
- * endpoints in addition to EP0.
- */
- int32_t dev_endpoints;
-//#define dwc_param_dev_endpoints_default 6
- /**
- * Specifies the type of PHY interface to use. By default, the driver
- * will automatically detect the phy_type.
- *
- * 0 - Full Speed PHY
- * 1 - UTMI+ (default)
- * 2 - ULPI
- */
- int32_t phy_type;
-#define DWC_PHY_TYPE_PARAM_FS 0
-#define DWC_PHY_TYPE_PARAM_UTMI 1
-#define DWC_PHY_TYPE_PARAM_ULPI 2
-//#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
- /**
- * Specifies the UTMI+ Data Width. This parameter is
- * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
- * PHY_TYPE, this parameter indicates the data width between
- * the MAC and the ULPI Wrapper.) Also, this parameter is
- * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
- * to "8 and 16 bits", meaning that the core has been
- * configured to work at either data path width.
- *
- * 8 or 16 bits (default 16)
- */
- int32_t phy_utmi_width;
-//#define dwc_param_phy_utmi_width_default 16
- /**
- * Specifies whether the ULPI operates at double or single
- * data rate. This parameter is only applicable if PHY_TYPE is
- * ULPI.
- *
- * 0 - single data rate ULPI interface with 8 bit wide data
- * bus (default)
- * 1 - double data rate ULPI interface with 4 bit wide data
- * bus
- */
- int32_t phy_ulpi_ddr;
-//#define dwc_param_phy_ulpi_ddr_default 0
- /**
- * Specifies whether to use the internal or external supply to
- * drive the vbus with a ULPI phy.
- */
- int32_t phy_ulpi_ext_vbus;
-#define DWC_PHY_ULPI_INTERNAL_VBUS 0
-#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
-//#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
- /**
- * Specifies whether to use the I2Cinterface for full speed PHY. This
- * parameter is only applicable if PHY_TYPE is FS.
- * 0 - No (default)
- * 1 - Yes
- */
- int32_t i2c_enable;
-//#define dwc_param_i2c_enable_default 0
-
- int32_t ulpi_fs_ls;
-//#define dwc_param_ulpi_fs_ls_default 0
-
- int32_t ts_dline;
-//#define dwc_param_ts_dline_default 0
-
- /**
- * Specifies whether dedicated transmit FIFOs are
- * enabled for non periodic IN endpoints in device mode
- * 0 - No
- * 1 - Yes
- */
- int32_t en_multiple_tx_fifo;
-#define dwc_param_en_multiple_tx_fifo_default 1
-
- /** Number of 4-byte words in each of the Tx FIFOs in device
- * mode when dynamic FIFO sizing is enabled.
- * 4 to 768 (default 256)
- */
- uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
-#define dwc_param_dev_tx_fifo_size_default 256
-
- /** Thresholding enable flag-
- * bit 0 - enable non-ISO Tx thresholding
- * bit 1 - enable ISO Tx thresholding
- * bit 2 - enable Rx thresholding
- */
- uint32_t thr_ctl;
-#define dwc_param_thr_ctl_default 0
-
- /** Thresholding length for Tx
- * FIFOs in 32 bit DWORDs
- */
- uint32_t tx_thr_length;
-#define dwc_param_tx_thr_length_default 64
-
- /** Thresholding length for Rx
- * FIFOs in 32 bit DWORDs
- */
- uint32_t rx_thr_length;
-#define dwc_param_rx_thr_length_default 64
-} dwc_otg_core_params_t;
-
-#ifdef DEBUG
-struct dwc_otg_core_if;
-typedef struct hc_xfer_info
-{
- struct dwc_otg_core_if *core_if;
- dwc_hc_t *hc;
-} hc_xfer_info_t;
-#endif
-
-/**
- * The <code>dwc_otg_core_if</code> structure contains information needed to manage
- * the DWC_otg controller acting in either host or device mode. It
- * represents the programming view of the controller as a whole.
- */
-typedef struct dwc_otg_core_if
-{
- /** Parameters that define how the core should be configured.*/
- dwc_otg_core_params_t *core_params;
-
- /** Core Global registers starting at offset 000h. */
- dwc_otg_core_global_regs_t *core_global_regs;
-
- /** Device-specific information */
- dwc_otg_dev_if_t *dev_if;
- /** Host-specific information */
- dwc_otg_host_if_t *host_if;
-
- /*
- * Set to 1 if the core PHY interface bits in USBCFG have been
- * initialized.
- */
- uint8_t phy_init_done;
-
- /*
- * SRP Success flag, set by srp success interrupt in FS I2C mode
- */
- uint8_t srp_success;
- uint8_t srp_timer_started;
-
- /* Common configuration information */
- /** Power and Clock Gating Control Register */
- volatile uint32_t *pcgcctl;
-#define DWC_OTG_PCGCCTL_OFFSET 0xE00
-
- /** Push/pop addresses for endpoints or host channels.*/
- uint32_t *data_fifo[MAX_EPS_CHANNELS];
-#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
-#define DWC_OTG_DATA_FIFO_SIZE 0x1000
-
- /** Total RAM for FIFOs (Bytes) */
- uint16_t total_fifo_size;
- /** Size of Rx FIFO (Bytes) */
- uint16_t rx_fifo_size;
- /** Size of Non-periodic Tx FIFO (Bytes) */
- uint16_t nperio_tx_fifo_size;
-
- /** 1 if DMA is enabled, 0 otherwise. */
- uint8_t dma_enable;
-
- /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
- uint8_t en_multiple_tx_fifo;
-
- /** Set to 1 if multiple packets of a high-bandwidth transfer is in
- * process of being queued */
- uint8_t queuing_high_bandwidth;
-
- /** Hardware Configuration -- stored here for convenience.*/
- hwcfg1_data_t hwcfg1;
- hwcfg2_data_t hwcfg2;
- hwcfg3_data_t hwcfg3;
- hwcfg4_data_t hwcfg4;
-
- /** The operational State, during transations
- * (a_host>>a_peripherial and b_device=>b_host) this may not
- * match the core but allows the software to determine
- * transitions.
- */
- uint8_t op_state;
-
- /**
- * Set to 1 if the HCD needs to be restarted on a session request
- * interrupt. This is required if no connector ID status change has
- * occurred since the HCD was last disconnected.
- */
- uint8_t restart_hcd_on_session_req;
-
- /** HCD callbacks */
- /** A-Device is a_host */
-#define A_HOST (1)
- /** A-Device is a_suspend */
-#define A_SUSPEND (2)
- /** A-Device is a_peripherial */
-#define A_PERIPHERAL (3)
- /** B-Device is operating as a Peripheral. */
-#define B_PERIPHERAL (4)
- /** B-Device is operating as a Host. */
-#define B_HOST (5)
-
- /** HCD callbacks */
- struct dwc_otg_cil_callbacks *hcd_cb;
- /** PCD callbacks */
- struct dwc_otg_cil_callbacks *pcd_cb;
-
- /** Device mode Periodic Tx FIFO Mask */
- uint32_t p_tx_msk;
- /** Device mode Periodic Tx FIFO Mask */
- uint32_t tx_msk;
-
-#ifdef DEBUG
- uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
-
- hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
- struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS];
-
-#if 1 // winder
- uint32_t hfnum_7_samples;
- uint32_t hfnum_7_frrem_accum;
- uint32_t hfnum_0_samples;
- uint32_t hfnum_0_frrem_accum;
- uint32_t hfnum_other_samples;
- uint32_t hfnum_other_frrem_accum;
-#else
- uint32_t hfnum_7_samples;
- uint64_t hfnum_7_frrem_accum;
- uint32_t hfnum_0_samples;
- uint64_t hfnum_0_frrem_accum;
- uint32_t hfnum_other_samples;
- uint64_t hfnum_other_frrem_accum;
-#endif
- resource_size_t phys_addr; /* Added to support PLB DMA : phys-virt mapping */
-#endif
-
-} dwc_otg_core_if_t;
-
-/*
- * The following functions support initialization of the CIL driver component
- * and the DWC_otg controller.
- */
-extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
- dwc_otg_core_params_t *_core_params);
-extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
-extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
-
-/** @name Device CIL Functions
- * The following functions support managing the DWC_otg controller in device
- * mode.
- */
-/**@{*/
-extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
-extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
-extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
-/**@}*/
-
-/** @name Host CIL Functions
- * The following functions support managing the DWC_otg controller in host
- * mode.
- */
-/**@{*/
-extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
- dwc_hc_t *_hc,
- dwc_otg_halt_status_e _halt_status);
-extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
-extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
-
-/**
- * This function Reads HPRT0 in preparation to modify. It keeps the
- * WC bits 0 so that if they are read as 1, they won't clear when you
- * write it back
- */
-static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if)
-{
- hprt0_data_t hprt0;
- hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
- hprt0.b.prtena = 0;
- hprt0.b.prtconndet = 0;
- hprt0.b.prtenchng = 0;
- hprt0.b.prtovrcurrchng = 0;
- return hprt0.d32;
-}
-
-extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
-/**@}*/
-
-/** @name Common CIL Functions
- * The following functions support managing the DWC_otg controller in either
- * device or host mode.
- */
-/**@{*/
-
-extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
- uint8_t *dest,
- uint16_t bytes);
-
-extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
-
-extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
- const int _num );
-extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
-extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
-
-#define NP_TXFIFO_EMPTY -1
-#define MAX_NP_TXREQUEST_Q_SLOTS 8
-/**
- * This function returns the endpoint number of the request at
- * the top of non-periodic TX FIFO, or -1 if the request FIFO is
- * empty.
- */
-static inline int dwc_otg_top_nptxfifo_epnum(dwc_otg_core_if_t *_core_if) {
- gnptxsts_data_t txstatus = {.d32 = 0};
-
- txstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
- return (txstatus.b.nptxqspcavail == MAX_NP_TXREQUEST_Q_SLOTS ?
- -1 : txstatus.b.nptxqtop_chnep);
-}
-/**
- * This function returns the Core Interrupt register.
- */
-static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if) {
- return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
- dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
-}
-
-/**
- * This function returns the OTG Interrupt register.
- */
-static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if) {
- return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
-}
-
-/**
- * This function reads the Device All Endpoints Interrupt register and
- * returns the IN endpoint interrupt bits.
- */
-static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *_core_if) {
- uint32_t v;
- v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) &
- dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk);
- return (v & 0xffff);
-
-}
-
-/**
- * This function reads the Device All Endpoints Interrupt register and
- * returns the OUT endpoint interrupt bits.
- */
-static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *_core_if) {
- uint32_t v;
- v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) &
- dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk);
- return ((v & 0xffff0000) >> 16);
-}
-
-/**
- * This function returns the Device IN EP Interrupt register
- */
-static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *_core_if,
- dwc_ep_t *_ep)
-{
- dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
- uint32_t v, msk, emp;
- msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
- emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
- msk |= ((emp >> _ep->num) & 0x1) << 7;
- v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) & msk;
-/*
- dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
- uint32_t v;
- v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) &
- dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
-*/
- return v;
-}
-/**
- * This function returns the Device OUT EP Interrupt register
- */
-static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if,
- dwc_ep_t *_ep)
-{
- dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
- uint32_t v;
- v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) &
- dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
- return v;
-}
-
-/**
- * This function returns the Host All Channel Interrupt register
- */
-static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
-{
- return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
-}
-
-static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-{
- return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
-}
-
-
-/**
- * This function returns the mode of the operation, host or device.
- *
- * @return 0 - Device Mode, 1 - Host Mode
- */
-static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if) {
- return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
-}
-
-static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if)
-{
- return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
-}
-static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if)
-{
- return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
-}
-
-extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
-
-
-/**@}*/
-
-/**
- * DWC_otg CIL callback structure. This structure allows the HCD and
- * PCD to register functions used for starting and stopping the PCD
- * and HCD for role change on for a DRD.
- */
-typedef struct dwc_otg_cil_callbacks
-{
- /** Start function for role change */
- int (*start) (void *_p);
- /** Stop Function for role change */
- int (*stop) (void *_p);
- /** Disconnect Function for role change */
- int (*disconnect) (void *_p);
- /** Resume/Remote wakeup Function */
- int (*resume_wakeup) (void *_p);
- /** Suspend function */
- int (*suspend) (void *_p);
- /** Session Start (SRP) */
- int (*session_start) (void *_p);
- /** Pointer passed to start() and stop() */
- void *p;
-} dwc_otg_cil_callbacks_t;
-
-
-
-extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
- dwc_otg_cil_callbacks_t *_cb,
- void *_p);
-extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
- dwc_otg_cil_callbacks_t *_cb,
- void *_p);
-
-
-#endif
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
deleted file mode 100644
index b0298ec2ea..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME : dwc_otg_cil_ifx.h
-** PROJECT : Twinpass/Danube
-** MODULES : DWC OTG USB
-**
-** DATE : 07 Sep. 2007
-** AUTHOR : Sung Winder
-** DESCRIPTION : Default param value.
-** COPYRIGHT : Copyright (c) 2007
-** Infineon Technologies AG
-** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
-** Hsin-chu City, 300 Taiwan.
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Date $Author $Comment
-** 12 April 2007 Sung Winder Initiate Version
-*******************************************************************************/
-#if !defined(__DWC_OTG_CIL_IFX_H__)
-#define __DWC_OTG_CIL_IFX_H__
-
-/* ================ Default param value ================== */
-#define dwc_param_opt_default 1
-#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE
-#define dwc_param_dma_enable_default 1
-#define dwc_param_dma_burst_size_default 32
-#define dwc_param_speed_default DWC_SPEED_PARAM_HIGH
-#define dwc_param_host_support_fs_ls_low_power_default 0
-#define dwc_param_host_ls_low_power_phy_clk_default DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ
-#define dwc_param_enable_dynamic_fifo_default 1
-#define dwc_param_data_fifo_size_default 2048
-#define dwc_param_dev_rx_fifo_size_default 1024
-#define dwc_param_dev_nperio_tx_fifo_size_default 1024
-#define dwc_param_dev_perio_tx_fifo_size_default 768
-#define dwc_param_host_rx_fifo_size_default 640
-#define dwc_param_host_nperio_tx_fifo_size_default 640
-#define dwc_param_host_perio_tx_fifo_size_default 768
-#define dwc_param_max_transfer_size_default 65535
-#define dwc_param_max_packet_count_default 511
-#define dwc_param_host_channels_default 16
-#define dwc_param_dev_endpoints_default 6
-#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
-#define dwc_param_phy_utmi_width_default 16
-#define dwc_param_phy_ulpi_ddr_default 0
-#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
-#define dwc_param_i2c_enable_default 0
-#define dwc_param_ulpi_fs_ls_default 0
-#define dwc_param_ts_dline_default 0
-
-/* ======================================================= */
-
-#endif // __DWC_OTG_CIL_IFX_H__
-
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
deleted file mode 100644
index d469ab46b0..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+++ /dev/null
@@ -1,708 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil_intr.c $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 553126 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- *
- * The Core Interface Layer provides basic services for accessing and
- * managing the DWC_otg hardware. These services are used by both the
- * Host Controller Driver and the Peripheral Controller Driver.
- *
- * This file contains the Common Interrupt handlers.
- */
-#include "dwc_otg_plat.h"
-#include "dwc_otg_regs.h"
-#include "dwc_otg_cil.h"
-
-#ifdef DEBUG
-inline const char *op_state_str( dwc_otg_core_if_t *_core_if )
-{
- return (_core_if->op_state==A_HOST?"a_host":
- (_core_if->op_state==A_SUSPEND?"a_suspend":
- (_core_if->op_state==A_PERIPHERAL?"a_peripheral":
- (_core_if->op_state==B_PERIPHERAL?"b_peripheral":
- (_core_if->op_state==B_HOST?"b_host":
- "unknown")))));
-}
-#endif
-
-/** This function will log a debug message
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *_core_if)
-{
- gintsts_data_t gintsts;
- DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
- dwc_otg_mode(_core_if) ? "Host" : "Device");
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.modemismatch = 1;
- dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
- return 1;
-}
-
-/** Start the HCD. Helper function for using the HCD callbacks.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_start( dwc_otg_core_if_t *_core_if )
-{
- if (_core_if->hcd_cb && _core_if->hcd_cb->start) {
- _core_if->hcd_cb->start( _core_if->hcd_cb->p );
- }
-}
-/** Stop the HCD. Helper function for using the HCD callbacks.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_stop( dwc_otg_core_if_t *_core_if )
-{
- if (_core_if->hcd_cb && _core_if->hcd_cb->stop) {
- _core_if->hcd_cb->stop( _core_if->hcd_cb->p );
- }
-}
-/** Disconnect the HCD. Helper function for using the HCD callbacks.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_disconnect( dwc_otg_core_if_t *_core_if )
-{
- if (_core_if->hcd_cb && _core_if->hcd_cb->disconnect) {
- _core_if->hcd_cb->disconnect( _core_if->hcd_cb->p );
- }
-}
-/** Inform the HCD the a New Session has begun. Helper function for
- * using the HCD callbacks.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-static inline void hcd_session_start( dwc_otg_core_if_t *_core_if )
-{
- if (_core_if->hcd_cb && _core_if->hcd_cb->session_start) {
- _core_if->hcd_cb->session_start( _core_if->hcd_cb->p );
- }
-}
-
-/** Start the PCD. Helper function for using the PCD callbacks.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_start( dwc_otg_core_if_t *_core_if )
-{
- if (_core_if->pcd_cb && _core_if->pcd_cb->start ) {
- _core_if->pcd_cb->start( _core_if->pcd_cb->p );
- }
-}
-/** Stop the PCD. Helper function for using the PCD callbacks.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_stop( dwc_otg_core_if_t *_core_if )
-{
- if (_core_if->pcd_cb && _core_if->pcd_cb->stop ) {
- _core_if->pcd_cb->stop( _core_if->pcd_cb->p );
- }
-}
-/** Suspend the PCD. Helper function for using the PCD callbacks.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_suspend( dwc_otg_core_if_t *_core_if )
-{
- if (_core_if->pcd_cb && _core_if->pcd_cb->suspend ) {
- _core_if->pcd_cb->suspend( _core_if->pcd_cb->p );
- }
-}
-/** Resume the PCD. Helper function for using the PCD callbacks.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-static inline void pcd_resume( dwc_otg_core_if_t *_core_if )
-{
- if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup ) {
- _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p );
- }
-}
-
-/**
- * This function handles the OTG Interrupts. It reads the OTG
- * Interrupt Register (GOTGINT) to determine what interrupt has
- * occurred.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *_core_if)
-{
- dwc_otg_core_global_regs_t *global_regs =
- _core_if->core_global_regs;
- gotgint_data_t gotgint;
- gotgctl_data_t gotgctl;
- gintmsk_data_t gintmsk;
-
- gotgint.d32 = dwc_read_reg32( &global_regs->gotgint);
- gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
- DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
- op_state_str(_core_if));
- //DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32 );
-
- if (gotgint.b.sesenddet) {
- DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
- "Session End Detected++ (%s)\n",
- op_state_str(_core_if));
- gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
-
- if (_core_if->op_state == B_HOST) {
- pcd_start( _core_if );
- _core_if->op_state = B_PERIPHERAL;
- } else {
- /* If not B_HOST and Device HNP still set. HNP
- * Did not succeed!*/
- if (gotgctl.b.devhnpen) {
- DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
- DWC_ERROR( "Device Not Connected/Responding!\n" );
- }
-
- /* If Session End Detected the B-Cable has
- * been disconnected. */
- /* Reset PCD and Gadget driver to a
- * clean state. */
- pcd_stop(_core_if);
- }
- gotgctl.d32 = 0;
- gotgctl.b.devhnpen = 1;
- dwc_modify_reg32( &global_regs->gotgctl,
- gotgctl.d32, 0);
- }
- if (gotgint.b.sesreqsucstschng) {
- DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
- "Session Reqeust Success Status Change++\n");
- gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
- if (gotgctl.b.sesreqscs) {
- if ((_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
- (_core_if->core_params->i2c_enable)) {
- _core_if->srp_success = 1;
- }
- else {
- pcd_resume( _core_if );
- /* Clear Session Request */
- gotgctl.d32 = 0;
- gotgctl.b.sesreq = 1;
- dwc_modify_reg32( &global_regs->gotgctl,
- gotgctl.d32, 0);
- }
- }
- }
- if (gotgint.b.hstnegsucstschng) {
- /* Print statements during the HNP interrupt handling
- * can cause it to fail.*/
- gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
- if (gotgctl.b.hstnegscs) {
- if (dwc_otg_is_host_mode(_core_if) ) {
- _core_if->op_state = B_HOST;
- /*
- * Need to disable SOF interrupt immediately.
- * When switching from device to host, the PCD
- * interrupt handler won't handle the
- * interrupt if host mode is already set. The
- * HCD interrupt handler won't get called if
- * the HCD state is HALT. This means that the
- * interrupt does not get handled and Linux
- * complains loudly.
- */
- gintmsk.d32 = 0;
- gintmsk.b.sofintr = 1;
- dwc_modify_reg32(&global_regs->gintmsk,
- gintmsk.d32, 0);
- pcd_stop(_core_if);
- /*
- * Initialize the Core for Host mode.
- */
- hcd_start( _core_if );
- _core_if->op_state = B_HOST;
- }
- } else {
- gotgctl.d32 = 0;
- gotgctl.b.hnpreq = 1;
- gotgctl.b.devhnpen = 1;
- dwc_modify_reg32( &global_regs->gotgctl,
- gotgctl.d32, 0);
- DWC_DEBUGPL( DBG_ANY, "HNP Failed\n");
- DWC_ERROR( "Device Not Connected/Responding\n" );
- }
- }
- if (gotgint.b.hstnegdet) {
- /* The disconnect interrupt is set at the same time as
- * Host Negotiation Detected. During the mode
- * switch all interrupts are cleared so the disconnect
- * interrupt handler will not get executed.
- */
- DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
- "Host Negotiation Detected++ (%s)\n",
- (dwc_otg_is_host_mode(_core_if)?"Host":"Device"));
- if (dwc_otg_is_device_mode(_core_if)){
- DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",_core_if->op_state);
- hcd_disconnect( _core_if );
- pcd_start( _core_if );
- _core_if->op_state = A_PERIPHERAL;
- } else {
- /*
- * Need to disable SOF interrupt immediately. When
- * switching from device to host, the PCD interrupt
- * handler won't handle the interrupt if host mode is
- * already set. The HCD interrupt handler won't get
- * called if the HCD state is HALT. This means that
- * the interrupt does not get handled and Linux
- * complains loudly.
- */
- gintmsk.d32 = 0;
- gintmsk.b.sofintr = 1;
- dwc_modify_reg32(&global_regs->gintmsk,
- gintmsk.d32, 0);
- pcd_stop( _core_if );
- hcd_start( _core_if );
- _core_if->op_state = A_HOST;
- }
- }
- if (gotgint.b.adevtoutchng) {
- DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
- "A-Device Timeout Change++\n");
- }
- if (gotgint.b.debdone) {
- DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
- "Debounce Done++\n");
- }
-
- /* Clear GOTGINT */
- dwc_write_reg32 (&_core_if->core_global_regs->gotgint, gotgint.d32);
-
- return 1;
-}
-
-/**
- * This function handles the Connector ID Status Change Interrupt. It
- * reads the OTG Interrupt Register (GOTCTL) to determine whether this
- * is a Device to Host Mode transition or a Host Mode to Device
- * Transition.
- *
- * This only occurs when the cable is connected/removed from the PHY
- * connector.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *_core_if)
-{
- uint32_t count = 0;
-
- gintsts_data_t gintsts = { .d32 = 0 };
- gintmsk_data_t gintmsk = { .d32 = 0 };
- gotgctl_data_t gotgctl = { .d32 = 0 };
-
- /*
- * Need to disable SOF interrupt immediately. If switching from device
- * to host, the PCD interrupt handler won't handle the interrupt if
- * host mode is already set. The HCD interrupt handler won't get
- * called if the HCD state is HALT. This means that the interrupt does
- * not get handled and Linux complains loudly.
- */
- gintmsk.b.sofintr = 1;
- dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-
- DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n",
- (dwc_otg_is_host_mode(_core_if)?"Host":"Device"));
- gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl);
- DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
- DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
-
- /* B-Device connector (Device Mode) */
- if (gotgctl.b.conidsts) {
- /* Wait for switch to device mode. */
- while (!dwc_otg_is_device_mode(_core_if) ){
- DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
- (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral"));
- MDELAY(100);
- if (++count > 10000) *(uint32_t*)NULL=0;
- }
- _core_if->op_state = B_PERIPHERAL;
- dwc_otg_core_init(_core_if);
- dwc_otg_enable_global_interrupts(_core_if);
- pcd_start( _core_if );
- } else {
- /* A-Device connector (Host Mode) */
- while (!dwc_otg_is_host_mode(_core_if) ) {
- DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
- (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral"));
- MDELAY(100);
- if (++count > 10000) *(uint32_t*)NULL=0;
- }
- _core_if->op_state = A_HOST;
- /*
- * Initialize the Core for Host mode.
- */
- dwc_otg_core_init(_core_if);
- dwc_otg_enable_global_interrupts(_core_if);
- hcd_start( _core_if );
- }
-
- /* Set flag and clear interrupt */
- gintsts.b.conidstschng = 1;
- dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/**
- * This interrupt indicates that a device is initiating the Session
- * Request Protocol to request the host to turn on bus power so a new
- * session can begin. The handler responds by turning on bus power. If
- * the DWC_otg controller is in low power mode, the handler brings the
- * controller out of low power mode before turning on bus power.
- *
- * @param _core_if Programming view of DWC_otg controller.
- */
-int32_t dwc_otg_handle_session_req_intr( dwc_otg_core_if_t *_core_if )
-{
-#ifndef DWC_HOST_ONLY // winder
- hprt0_data_t hprt0;
-#endif
- gintsts_data_t gintsts;
-
-#ifndef DWC_HOST_ONLY
- DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
-
- if (dwc_otg_is_device_mode(_core_if) ) {
- DWC_PRINT("SRP: Device mode\n");
- } else {
- DWC_PRINT("SRP: Host mode\n");
-
- /* Turn on the port power bit. */
- hprt0.d32 = dwc_otg_read_hprt0( _core_if );
- hprt0.b.prtpwr = 1;
- dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32);
-
- /* Start the Connection timer. So a message can be displayed
- * if connect does not occur within 10 seconds. */
- hcd_session_start( _core_if );
- }
-#endif
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.sessreqintr = 1;
- dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/**
- * This interrupt indicates that the DWC_otg controller has detected a
- * resume or remote wakeup sequence. If the DWC_otg controller is in
- * low power mode, the handler must brings the controller out of low
- * power mode. The controller automatically begins resume
- * signaling. The handler schedules a time to stop resume signaling.
- */
-int32_t dwc_otg_handle_wakeup_detected_intr( dwc_otg_core_if_t *_core_if )
-{
- gintsts_data_t gintsts;
-
- DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
-
- if (dwc_otg_is_device_mode(_core_if) ) {
- dctl_data_t dctl = {.d32=0};
- DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
- dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts));
-#ifdef PARTIAL_POWER_DOWN
- if (_core_if->hwcfg4.b.power_optimiz) {
- pcgcctl_data_t power = {.d32=0};
-
- power.d32 = dwc_read_reg32( _core_if->pcgcctl );
- DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
-
- power.b.stoppclk = 0;
- dwc_write_reg32( _core_if->pcgcctl, power.d32);
-
- power.b.pwrclmp = 0;
- dwc_write_reg32( _core_if->pcgcctl, power.d32);
-
- power.b.rstpdwnmodule = 0;
- dwc_write_reg32( _core_if->pcgcctl, power.d32);
- }
-#endif
- /* Clear the Remote Wakeup Signalling */
- dctl.b.rmtwkupsig = 1;
- dwc_modify_reg32( &_core_if->dev_if->dev_global_regs->dctl,
- dctl.d32, 0 );
-
- if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup) {
- _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p );
- }
-
- } else {
- /*
- * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
- * so that OPT tests pass with all PHYs).
- */
- hprt0_data_t hprt0 = {.d32=0};
- pcgcctl_data_t pcgcctl = {.d32=0};
- /* Restart the Phy Clock */
- pcgcctl.b.stoppclk = 1;
- dwc_modify_reg32(_core_if->pcgcctl, pcgcctl.d32, 0);
- UDELAY(10);
-
- /* Now wait for 70 ms. */
- hprt0.d32 = dwc_otg_read_hprt0( _core_if );
- DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
- MDELAY(70);
- hprt0.b.prtres = 0; /* Resume */
- dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32);
- DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(_core_if->host_if->hprt0));
- }
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.wkupintr = 1;
- dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/**
- * This interrupt indicates that a device has been disconnected from
- * the root port.
- */
-int32_t dwc_otg_handle_disconnect_intr( dwc_otg_core_if_t *_core_if)
-{
- gintsts_data_t gintsts;
-
- DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
- (dwc_otg_is_host_mode(_core_if)?"Host":"Device"),
- op_state_str(_core_if));
-
-/** @todo Consolidate this if statement. */
-#ifndef DWC_HOST_ONLY
- if (_core_if->op_state == B_HOST) {
- /* If in device mode Disconnect and stop the HCD, then
- * start the PCD. */
- hcd_disconnect( _core_if );
- pcd_start( _core_if );
- _core_if->op_state = B_PERIPHERAL;
- } else if (dwc_otg_is_device_mode(_core_if)) {
- gotgctl_data_t gotgctl = { .d32 = 0 };
- gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl);
- if (gotgctl.b.hstsethnpen==1) {
- /* Do nothing, if HNP in process the OTG
- * interrupt "Host Negotiation Detected"
- * interrupt will do the mode switch.
- */
- } else if (gotgctl.b.devhnpen == 0) {
- /* If in device mode Disconnect and stop the HCD, then
- * start the PCD. */
- hcd_disconnect( _core_if );
- pcd_start( _core_if );
- _core_if->op_state = B_PERIPHERAL;
- } else {
- DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
- }
- } else {
- if (_core_if->op_state == A_HOST) {
- /* A-Cable still connected but device disconnected. */
- hcd_disconnect( _core_if );
- }
- }
-#endif
-/* Without OTG, we should use the disconnect function!? winder added.*/
-#if 1 // NO OTG, so host only!!
- hcd_disconnect( _core_if );
-#endif
-
- gintsts.d32 = 0;
- gintsts.b.disconnect = 1;
- dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
- return 1;
-}
-/**
- * This interrupt indicates that SUSPEND state has been detected on
- * the USB.
- *
- * For HNP the USB Suspend interrupt signals the change from
- * "a_peripheral" to "a_host".
- *
- * When power management is enabled the core will be put in low power
- * mode.
- */
-int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *_core_if )
-{
- dsts_data_t dsts;
- gintsts_data_t gintsts;
-
- //805141:<IFTW-fchang>.removed DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
-
- if (dwc_otg_is_device_mode( _core_if ) ) {
- /* Check the Device status register to determine if the Suspend
- * state is active. */
- dsts.d32 = dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts);
- DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
- DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
- "HWCFG4.power Optimize=%d\n",
- dsts.b.suspsts, _core_if->hwcfg4.b.power_optimiz);
-
-
-#ifdef PARTIAL_POWER_DOWN
-/** @todo Add a module parameter for power management. */
-
- if (dsts.b.suspsts && _core_if->hwcfg4.b.power_optimiz) {
- pcgcctl_data_t power = {.d32=0};
- DWC_DEBUGPL(DBG_CIL, "suspend\n");
-
- power.b.pwrclmp = 1;
- dwc_write_reg32( _core_if->pcgcctl, power.d32);
-
- power.b.rstpdwnmodule = 1;
- dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32);
-
- power.b.stoppclk = 1;
- dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32);
-
- } else {
- DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
- }
-#endif
- /* PCD callback for suspend. */
- pcd_suspend(_core_if);
- } else {
- if (_core_if->op_state == A_PERIPHERAL) {
- DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
- /* Clear the a_peripheral flag, back to a_host. */
- pcd_stop( _core_if );
- hcd_start( _core_if );
- _core_if->op_state = A_HOST;
- }
- }
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.usbsuspend = 1;
- dwc_write_reg32( &_core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-
-/**
- * This function returns the Core Interrupt register.
- */
-static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *_core_if)
-{
- gintsts_data_t gintsts;
- gintmsk_data_t gintmsk;
- gintmsk_data_t gintmsk_common = {.d32=0};
- gintmsk_common.b.wkupintr = 1;
- gintmsk_common.b.sessreqintr = 1;
- gintmsk_common.b.conidstschng = 1;
- gintmsk_common.b.otgintr = 1;
- gintmsk_common.b.modemismatch = 1;
- gintmsk_common.b.disconnect = 1;
- gintmsk_common.b.usbsuspend = 1;
- /** @todo: The port interrupt occurs while in device
- * mode. Added code to CIL to clear the interrupt for now!
- */
- gintmsk_common.b.portintr = 1;
-
- gintsts.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintsts);
- gintmsk.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintmsk);
-#ifdef DEBUG
- /* if any common interrupts set */
- if (gintsts.d32 & gintmsk_common.d32) {
- DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n",
- gintsts.d32, gintmsk.d32);
- }
-#endif
-
- return ((gintsts.d32 & gintmsk.d32 ) & gintmsk_common.d32);
-
-}
-
-/**
- * Common interrupt handler.
- *
- * The common interrupts are those that occur in both Host and Device mode.
- * This handler handles the following interrupts:
- * - Mode Mismatch Interrupt
- * - Disconnect Interrupt
- * - OTG Interrupt
- * - Connector ID Status Change Interrupt
- * - Session Request Interrupt.
- * - Resume / Remote Wakeup Detected Interrupt.
- *
- */
-extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if )
-{
- int retval = 0;
- gintsts_data_t gintsts;
-
- gintsts.d32 = dwc_otg_read_common_intr(_core_if);
-
- if (gintsts.b.modemismatch) {
- retval |= dwc_otg_handle_mode_mismatch_intr( _core_if );
- }
- if (gintsts.b.otgintr) {
- retval |= dwc_otg_handle_otg_intr( _core_if );
- }
- if (gintsts.b.conidstschng) {
- retval |= dwc_otg_handle_conn_id_status_change_intr( _core_if );
- }
- if (gintsts.b.disconnect) {
- retval |= dwc_otg_handle_disconnect_intr( _core_if );
- }
- if (gintsts.b.sessreqintr) {
- retval |= dwc_otg_handle_session_req_intr( _core_if );
- }
- if (gintsts.b.wkupintr) {
- retval |= dwc_otg_handle_wakeup_detected_intr( _core_if );
- }
- if (gintsts.b.usbsuspend) {
- retval |= dwc_otg_handle_usb_suspend_intr( _core_if );
- }
- if (gintsts.b.portintr && dwc_otg_is_device_mode(_core_if)) {
- /* The port interrupt occurs while in device mode with HPRT0
- * Port Enable/Disable.
- */
- gintsts.d32 = 0;
- gintsts.b.portintr = 1;
- dwc_write_reg32(&_core_if->core_global_regs->gintsts,
- gintsts.d32);
- retval |= 1;
-
- }
- return retval;
-}
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_driver.c b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_driver.c
deleted file mode 100644
index 5c64ebbe0d..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_driver.c
+++ /dev/null
@@ -1,1277 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 631780 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-/** @file
- * The dwc_otg_driver module provides the initialization and cleanup entry
- * points for the DWC_otg driver. This module will be dynamically installed
- * after Linux is booted using the insmod command. When the module is
- * installed, the dwc_otg_init function is called. When the module is
- * removed (using rmmod), the dwc_otg_cleanup function is called.
- *
- * This module also defines a data structure for the dwc_otg_driver, which is
- * used in conjunction with the standard ARM lm_device structure. These
- * structures allow the OTG driver to comply with the standard Linux driver
- * model in which devices and drivers are registered with a bus driver. This
- * has the benefit that Linux can expose attributes of the driver and device
- * in its special sysfs file system. Users can then read or write files in
- * this file system to perform diagnostics on the driver components or the
- * device.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/stat.h> /* permission constants */
-#include <linux/irq.h>
-#include <asm/io.h>
-
-#include "dwc_otg_plat.h"
-#include "dwc_otg_attr.h"
-#include "dwc_otg_driver.h"
-#include "dwc_otg_cil.h"
-#include "dwc_otg_cil_ifx.h"
-
-// #include "dwc_otg_pcd.h" // device
-#include "dwc_otg_hcd.h" // host
-
-#include "dwc_otg_ifx.h" // for Infineon platform specific.
-
-#define DWC_DRIVER_VERSION "2.60a 22-NOV-2006"
-#define DWC_DRIVER_DESC "HS OTG USB Controller driver"
-
-const char dwc_driver_name[] = "dwc_otg";
-
-static unsigned long dwc_iomem_base = IFX_USB_IOMEM_BASE;
-int dwc_irq = LTQ_USB_INT;
-//int dwc_irq = 54;
-//int dwc_irq = IFXMIPS_USB_OC_INT;
-
-extern int ifx_usb_hc_init(unsigned long base_addr, int irq);
-extern void ifx_usb_hc_remove(void);
-
-/*-------------------------------------------------------------------------*/
-/* Encapsulate the module parameter settings */
-
-static dwc_otg_core_params_t dwc_otg_module_params = {
- .opt = -1,
- .otg_cap = -1,
- .dma_enable = -1,
- .dma_burst_size = -1,
- .speed = -1,
- .host_support_fs_ls_low_power = -1,
- .host_ls_low_power_phy_clk = -1,
- .enable_dynamic_fifo = -1,
- .data_fifo_size = -1,
- .dev_rx_fifo_size = -1,
- .dev_nperio_tx_fifo_size = -1,
- .dev_perio_tx_fifo_size = /* dev_perio_tx_fifo_size_1 */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 15 */
- .host_rx_fifo_size = -1,
- .host_nperio_tx_fifo_size = -1,
- .host_perio_tx_fifo_size = -1,
- .max_transfer_size = -1,
- .max_packet_count = -1,
- .host_channels = -1,
- .dev_endpoints = -1,
- .phy_type = -1,
- .phy_utmi_width = -1,
- .phy_ulpi_ddr = -1,
- .phy_ulpi_ext_vbus = -1,
- .i2c_enable = -1,
- .ulpi_fs_ls = -1,
- .ts_dline = -1,
- .en_multiple_tx_fifo = -1,
- .dev_tx_fifo_size = { /* dev_tx_fifo_size */
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
- }, /* 15 */
- .thr_ctl = -1,
- .tx_thr_length = -1,
- .rx_thr_length = -1,
-};
-
-/**
- * This function shows the Driver Version.
- */
-static ssize_t version_show(struct device_driver *dev, char *buf)
-{
- return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2,"%s\n",
- DWC_DRIVER_VERSION);
-}
-static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
-
-/**
- * Global Debug Level Mask.
- */
-uint32_t g_dbg_lvl = 0xff; /* OFF */
-
-/**
- * This function shows the driver Debug Level.
- */
-static ssize_t dbg_level_show(struct device_driver *_drv, char *_buf)
-{
- return sprintf(_buf, "0x%0x\n", g_dbg_lvl);
-}
-/**
- * This function stores the driver Debug Level.
- */
-static ssize_t dbg_level_store(struct device_driver *_drv, const char *_buf,
- size_t _count)
-{
- g_dbg_lvl = simple_strtoul(_buf, NULL, 16);
- return _count;
-}
-static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store);
-
-/**
- * This function is called during module intialization to verify that
- * the module parameters are in a valid state.
- */
-static int check_parameters(dwc_otg_core_if_t *core_if)
-{
- int i;
- int retval = 0;
-
-/* Checks if the parameter is outside of its valid range of values */
-#define DWC_OTG_PARAM_TEST(_param_,_low_,_high_) \
- ((dwc_otg_module_params._param_ < (_low_)) || \
- (dwc_otg_module_params._param_ > (_high_)))
-
-/* If the parameter has been set by the user, check that the parameter value is
- * within the value range of values. If not, report a module error. */
-#define DWC_OTG_PARAM_ERR(_param_,_low_,_high_,_string_) \
- do { \
- if (dwc_otg_module_params._param_ != -1) { \
- if (DWC_OTG_PARAM_TEST(_param_,(_low_),(_high_))) { \
- DWC_ERROR("`%d' invalid for parameter `%s'\n", \
- dwc_otg_module_params._param_, _string_); \
- dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
- retval ++; \
- } \
- } \
- } while (0)
-
- DWC_OTG_PARAM_ERR(opt,0,1,"opt");
- DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
- DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
- DWC_OTG_PARAM_ERR(speed,0,1,"speed");
- DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
- DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
- DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
- DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
- DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
- DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
- DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
- DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
- DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
- DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
- DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
- DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
- DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
- DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
- DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
- DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
- DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
- DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
- DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
-
- if (dwc_otg_module_params.dma_burst_size != -1) {
- if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
- DWC_OTG_PARAM_TEST(dma_burst_size,256,256))
- {
- DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
- dwc_otg_module_params.dma_burst_size);
- dwc_otg_module_params.dma_burst_size = 32;
- retval ++;
- }
- }
-
- if (dwc_otg_module_params.phy_utmi_width != -1) {
- if (DWC_OTG_PARAM_TEST(phy_utmi_width,8,8) &&
- DWC_OTG_PARAM_TEST(phy_utmi_width,16,16))
- {
- DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
- dwc_otg_module_params.phy_utmi_width);
- //dwc_otg_module_params.phy_utmi_width = 16;
- dwc_otg_module_params.phy_utmi_width = 8;
- retval ++;
- }
- }
-
- for (i=0; i<15; i++) {
- /** @todo should be like above */
- //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i],4,768,"dev_perio_tx_fifo_size");
- if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
- if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i],4,768)) {
- DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
- dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
- dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
- retval ++;
- }
- }
- }
-
- DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
- for (i = 0; i < 15; i++) {
- /** @todo should be like above */
- //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i],4,768,"dev_tx_fifo_size");
- if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
- if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
- DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
- dwc_otg_module_params.dev_tx_fifo_size[i],
- "dev_tx_fifo_size", i);
- dwc_otg_module_params.dev_tx_fifo_size[i] =
- dwc_param_dev_tx_fifo_size_default;
- retval++;
- }
- }
- }
- DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
- DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
- DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
-
- /* At this point, all module parameters that have been set by the user
- * are valid, and those that have not are left unset. Now set their
- * default values and/or check the parameters against the hardware
- * configurations of the OTG core. */
-
-
-
-/* This sets the parameter to the default value if it has not been set by the
- * user */
-#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
- ({ \
- int changed = 1; \
- if (dwc_otg_module_params._param_ == -1) { \
- changed = 0; \
- dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
- } \
- changed; \
- })
-
-/* This checks the macro agains the hardware configuration to see if it is
- * valid. It is possible that the default value could be invalid. In this
- * case, it will report a module error if the user touched the parameter.
- * Otherwise it will adjust the value without any error. */
-#define DWC_OTG_PARAM_CHECK_VALID(_param_,_str_,_is_valid_,_set_valid_) \
- ({ \
- int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
- int error = 0; \
- if (!(_is_valid_)) { \
- if (changed) { \
- DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_,_str_); \
- error = 1; \
- } \
- dwc_otg_module_params._param_ = (_set_valid_); \
- } \
- error; \
- })
-
- /* OTG Cap */
- retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap,"otg_cap",
- ({
- int valid;
- valid = 1;
- switch (dwc_otg_module_params.otg_cap) {
- case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
- if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) valid = 0;
- break;
- case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
- if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
- (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
- (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
- (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST))
- {
- valid = 0;
- }
- break;
- case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
- /* always valid */
- break;
- }
- valid;
- }),
- (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
- (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
- (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
- (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
- DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
- DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable,"dma_enable",
- ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1,
- 0);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(opt,"opt",
- 1,
- 0);
-
- DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
- "host_support_fs_ls_low_power",
- 1, 0);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
- "enable_dynamic_fifo",
- ((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
- (core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
-
-
- retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
- "data_fifo_size",
- (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
- core_if->hwcfg3.b.dfifo_depth);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
- "dev_rx_fifo_size",
- (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
- dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
- "dev_nperio_tx_fifo_size",
- (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
- (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
- "host_rx_fifo_size",
- (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
- dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
- "host_nperio_tx_fifo_size",
- (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
- (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
- "host_perio_tx_fifo_size",
- (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
- ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
- "max_transfer_size",
- (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
- ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
- "max_packet_count",
- (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
- ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
- "host_channels",
- (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
- (core_if->hwcfg2.b.num_host_chan + 1));
-
- retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
- "dev_endpoints",
- (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
- core_if->hwcfg2.b.num_dev_ep);
-
-/*
- * Define the following to disable the FS PHY Hardware checking. This is for
- * internal testing only.
- *
- * #define NO_FS_PHY_HW_CHECKS
- */
-
-#ifdef NO_FS_PHY_HW_CHECKS
- retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
- "phy_type", 1, 0);
-#else
- retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
- "phy_type",
- ({
- int valid = 0;
- if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
- ((core_if->hwcfg2.b.hs_phy_type == 1) ||
- (core_if->hwcfg2.b.hs_phy_type == 3)))
- {
- valid = 1;
- }
- else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
- ((core_if->hwcfg2.b.hs_phy_type == 2) ||
- (core_if->hwcfg2.b.hs_phy_type == 3)))
- {
- valid = 1;
- }
- else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
- (core_if->hwcfg2.b.fs_phy_type == 1))
- {
- valid = 1;
- }
- valid;
- }),
- ({
- int set = DWC_PHY_TYPE_PARAM_FS;
- if (core_if->hwcfg2.b.hs_phy_type) {
- if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
- (core_if->hwcfg2.b.hs_phy_type == 1)) {
- set = DWC_PHY_TYPE_PARAM_UTMI;
- }
- else {
- set = DWC_PHY_TYPE_PARAM_ULPI;
- }
- }
- set;
- }));
-#endif
-
- retval += DWC_OTG_PARAM_CHECK_VALID(speed,"speed",
- (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
- dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
-
- retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
- "host_ls_low_power_phy_clk",
- ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
- ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
-
- DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
- DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
- DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
- DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
- DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
-
-#ifdef NO_FS_PHY_HW_CHECKS
- retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
- "i2c_enable", 1, 0);
-#else
- retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
- "i2c_enable",
- (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
- 0);
-#endif
-
- for (i=0; i<16; i++) {
-
- int changed = 1;
- int error = 0;
-
- if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
- changed = 0;
- dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
- }
- if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
- if (changed) {
- DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i],i);
- error = 1;
- }
- dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
- }
- retval += error;
- }
-
- retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo,
- "en_multiple_tx_fifo",
- ((dwc_otg_module_params.en_multiple_tx_fifo == 1) &&
- (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1, 0);
-
- for (i = 0; i < 16; i++) {
- int changed = 1;
- int error = 0;
- if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
- changed = 0;
- dwc_otg_module_params.dev_tx_fifo_size[i] =
- dwc_param_dev_tx_fifo_size_default;
- }
- if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <=
- (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
- if (changed) {
- DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'."
- "Check HW configuration.\n",dwc_otg_module_params.dev_tx_fifo_size[i],i);
- error = 1;
- }
- dwc_otg_module_params.dev_tx_fifo_size[i] =
- dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
- }
- retval += error;
- }
- DWC_OTG_PARAM_SET_DEFAULT(thr_ctl);
- DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
- DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
- return retval;
-} // check_parameters
-
-
-/**
- * This function is the top level interrupt handler for the Common
- * (Device and host modes) interrupts.
- */
-static irqreturn_t dwc_otg_common_irq(int _irq, void *_dev)
-{
- dwc_otg_device_t *otg_dev = _dev;
- int32_t retval = IRQ_NONE;
-
- retval = dwc_otg_handle_common_intr( otg_dev->core_if );
-
- mask_and_ack_ifx_irq (_irq);
-
- return IRQ_RETVAL(retval);
-}
-
-
-/**
- * This function is called when a DWC_OTG device is unregistered with the
- * dwc_otg_driver. This happens, for example, when the rmmod command is
- * executed. The device may or may not be electrically present. If it is
- * present, the driver stops device processing. Any resources used on behalf
- * of this device are freed.
- *
- * @return
- */
-static int
-dwc_otg_driver_remove(struct platform_device *_dev)
-{
- //dwc_otg_device_t *otg_dev = dev_get_drvdata(&_dev->dev);
- dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev);
-
- DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, _dev);
-
- if (otg_dev == NULL) {
- /* Memory allocation for the dwc_otg_device failed. */
- return 0;
- }
-
- /*
- * Free the IRQ
- */
- if (otg_dev->common_irq_installed) {
- free_irq( otg_dev->irq, otg_dev );
- }
-
-#ifndef DWC_DEVICE_ONLY
- if (otg_dev->hcd != NULL) {
- dwc_otg_hcd_remove(&_dev->dev);
- }
-#endif
- printk("after removehcd\n");
-
-// Note: Integrate HOST and DEVICE(Gadget) is not planned yet.
-#ifndef DWC_HOST_ONLY
- if (otg_dev->pcd != NULL) {
- dwc_otg_pcd_remove(otg_dev);
- }
-#endif
- if (otg_dev->core_if != NULL) {
- dwc_otg_cil_remove( otg_dev->core_if );
- }
- printk("after removecil\n");
-
- /*
- * Remove the device attributes
- */
- dwc_otg_attr_remove(&_dev->dev);
- printk("after removeattr\n");
-
- /*
- * Return the memory.
- */
- if (otg_dev->base != NULL) {
- iounmap(otg_dev->base);
- }
- if (otg_dev->phys_addr != 0) {
- release_mem_region(otg_dev->phys_addr, otg_dev->base_len);
- }
- kfree(otg_dev);
-
- /*
- * Clear the drvdata pointer.
- */
- //dev_set_drvdata(&_dev->dev, 0);
- platform_set_drvdata(_dev, 0);
- return 0;
-}
-
-/**
- * This function is called when an DWC_OTG device is bound to a
- * dwc_otg_driver. It creates the driver components required to
- * control the device (CIL, HCD, and PCD) and it initializes the
- * device. The driver components are stored in a dwc_otg_device
- * structure. A reference to the dwc_otg_device is saved in the
- * lm_device. This allows the driver to access the dwc_otg_device
- * structure on subsequent calls to driver methods for this device.
- *
- * @return
- */
-static int __devinit
-dwc_otg_driver_probe(struct platform_device *_dev)
-{
- int retval = 0;
- dwc_otg_device_t *dwc_otg_device;
- int pin = (int)_dev->dev.platform_data;
- int32_t snpsid;
- struct resource *res;
- gusbcfg_data_t usbcfg = {.d32 = 0};
-
- // GPIOs
- if(pin >= 0)
- {
- gpio_request(pin, "usb_power");
- gpio_direction_output(pin, 1);
- gpio_set_value(pin, 1);
- gpio_export(pin, 0);
- }
- dev_dbg(&_dev->dev, "dwc_otg_driver_probe (%p)\n", _dev);
-
- dwc_otg_device = kmalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
- if (dwc_otg_device == 0) {
- dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n");
- retval = -ENOMEM;
- goto fail;
- }
- memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
- dwc_otg_device->reg_offset = 0xFFFFFFFF;
-
- /*
- * Retrieve the memory and IRQ resources.
- */
- dwc_otg_device->irq = platform_get_irq(_dev, 0);
- if (dwc_otg_device->irq == 0) {
- dev_err(&_dev->dev, "no device irq\n");
- retval = -ENODEV;
- goto fail;
- }
- dev_dbg(&_dev->dev, "OTG - device irq: %d\n", dwc_otg_device->irq);
- res = platform_get_resource(_dev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&_dev->dev, "no CSR address\n");
- retval = -ENODEV;
- goto fail;
- }
- dev_dbg(&_dev->dev, "OTG - ioresource_mem start0x%08x: end:0x%08x\n",
- (unsigned)res->start, (unsigned)res->end);
- dwc_otg_device->phys_addr = res->start;
- dwc_otg_device->base_len = res->end - res->start + 1;
- if (request_mem_region(dwc_otg_device->phys_addr, dwc_otg_device->base_len,
- dwc_driver_name) == NULL) {
- dev_err(&_dev->dev, "request_mem_region failed\n");
- retval = -EBUSY;
- goto fail;
- }
-
- /*
- * Map the DWC_otg Core memory into virtual address space.
- */
- dwc_otg_device->base = ioremap_nocache(dwc_otg_device->phys_addr, dwc_otg_device->base_len);
- if (dwc_otg_device->base == NULL) {
- dev_err(&_dev->dev, "ioremap() failed\n");
- retval = -ENOMEM;
- goto fail;
- }
- dev_dbg(&_dev->dev, "mapped base=0x%08x\n", (unsigned)dwc_otg_device->base);
-
- /*
- * Attempt to ensure this device is really a DWC_otg Controller.
- * Read and verify the SNPSID register contents. The value should be
- * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
- */
- snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)dwc_otg_device->base + 0x40));
- if ((snpsid & 0xFFFFF000) != 0x4F542000) {
- dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
- retval = -EINVAL;
- goto fail;
- }
-
- /*
- * Initialize driver data to point to the global DWC_otg
- * Device structure.
- */
- platform_set_drvdata(_dev, dwc_otg_device);
- dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
- dwc_otg_device->core_if = dwc_otg_cil_init( dwc_otg_device->base, &dwc_otg_module_params);
- if (dwc_otg_device->core_if == 0) {
- dev_err(&_dev->dev, "CIL initialization failed!\n");
- retval = -ENOMEM;
- goto fail;
- }
-
- /*
- * Validate parameter values.
- */
- if (check_parameters(dwc_otg_device->core_if) != 0) {
- retval = -EINVAL;
- goto fail;
- }
-
- /* Added for PLB DMA phys virt mapping */
- //dwc_otg_device->core_if->phys_addr = dwc_otg_device->phys_addr;
- /*
- * Create Device Attributes in sysfs
- */
- dwc_otg_attr_create (&_dev->dev);
-
- /*
- * Disable the global interrupt until all the interrupt
- * handlers are installed.
- */
- dwc_otg_disable_global_interrupts( dwc_otg_device->core_if );
- /*
- * Install the interrupt handler for the common interrupts before
- * enabling common interrupts in core_init below.
- */
- DWC_DEBUGPL( DBG_CIL, "registering (common) handler for irq%d\n", dwc_otg_device->irq);
-
- retval = request_irq((unsigned int)dwc_otg_device->irq, dwc_otg_common_irq,
- //SA_INTERRUPT|SA_SHIRQ, "dwc_otg", (void *)dwc_otg_device );
- IRQF_SHARED, "dwc_otg", (void *)dwc_otg_device );
- //IRQF_DISABLED, "dwc_otg", (void *)dwc_otg_device );
- if (retval != 0) {
- DWC_ERROR("request of irq%d failed retval: %d\n", dwc_otg_device->irq, retval);
- retval = -EBUSY;
- goto fail;
- } else {
- dwc_otg_device->common_irq_installed = 1;
- }
-
- /*
- * Initialize the DWC_otg core.
- */
- dwc_otg_core_init( dwc_otg_device->core_if );
-
-
-#ifndef DWC_HOST_ONLY // otg device mode. (gadget.)
- /*
- * Initialize the PCD
- */
- retval = dwc_otg_pcd_init(dwc_otg_device);
- if (retval != 0) {
- DWC_ERROR("dwc_otg_pcd_init failed\n");
- dwc_otg_device->pcd = NULL;
- goto fail;
- }
-#endif // DWC_HOST_ONLY
-
-#ifndef DWC_DEVICE_ONLY // otg host mode. (HCD)
- /*
- * Initialize the HCD
- */
-#if 1 /*fscz*/
- /* force_host_mode */
- usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg);
- usbcfg.b.force_host_mode = 1;
- dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32);
-#endif
- retval = dwc_otg_hcd_init(&_dev->dev, dwc_otg_device);
- if (retval != 0) {
- DWC_ERROR("dwc_otg_hcd_init failed\n");
- dwc_otg_device->hcd = NULL;
- goto fail;
- }
-#endif // DWC_DEVICE_ONLY
-
- /*
- * Enable the global interrupt after all the interrupt
- * handlers are installed.
- */
- dwc_otg_enable_global_interrupts( dwc_otg_device->core_if );
-#if 0 /*fscz*/
- usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg);
- usbcfg.b.force_host_mode = 0;
- dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32);
-#endif
-
-
- return 0;
-
-fail:
- dwc_otg_driver_remove(_dev);
- return retval;
-}
-
-/**
- * This structure defines the methods to be called by a bus driver
- * during the lifecycle of a device on that bus. Both drivers and
- * devices are registered with a bus driver. The bus driver matches
- * devices to drivers based on information in the device and driver
- * structures.
- *
- * The probe function is called when the bus driver matches a device
- * to this driver. The remove function is called when a device is
- * unregistered with the bus driver.
- */
-struct platform_driver dwc_otg_driver = {
- .probe = dwc_otg_driver_probe,
- .remove = dwc_otg_driver_remove,
-// .suspend = dwc_otg_driver_suspend,
-// .resume = dwc_otg_driver_resume,
- .driver = {
- .name = dwc_driver_name,
- .owner = THIS_MODULE,
- },
-};
-EXPORT_SYMBOL(dwc_otg_driver);
-
-/**
- * This function is called when the dwc_otg_driver is installed with the
- * insmod command. It registers the dwc_otg_driver structure with the
- * appropriate bus driver. This will cause the dwc_otg_driver_probe function
- * to be called. In addition, the bus driver will automatically expose
- * attributes defined for the device and driver in the special sysfs file
- * system.
- *
- * @return
- */
-static int __init dwc_otg_init(void)
-{
- int retval = 0;
-
- printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
-
- if (ltq_is_ase())
- dwc_irq = LTQ_USB_ASE_INT;
-
- // ifxmips setup
- retval = ifx_usb_hc_init(dwc_iomem_base, dwc_irq);
- if (retval < 0)
- {
- printk(KERN_ERR "%s retval=%d\n", __func__, retval);
- return retval;
- }
- dwc_otg_power_on(); // ifx only!!
-
-
- retval = platform_driver_register(&dwc_otg_driver);
-
- if (retval < 0) {
- printk(KERN_ERR "%s retval=%d\n", __func__, retval);
- goto error1;
- }
-
- retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version);
- if (retval < 0)
- {
- printk(KERN_ERR "%s retval=%d\n", __func__, retval);
- goto error2;
- }
- retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
- if (retval < 0)
- {
- printk(KERN_ERR "%s retval=%d\n", __func__, retval);
- goto error3;
- }
- return retval;
-
-
-error3:
- driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
-error2:
- driver_unregister(&dwc_otg_driver.driver);
-error1:
- ifx_usb_hc_remove();
- return retval;
-}
-module_init(dwc_otg_init);
-
-/**
- * This function is called when the driver is removed from the kernel
- * with the rmmod command. The driver unregisters itself with its bus
- * driver.
- *
- */
-static void __exit dwc_otg_cleanup(void)
-{
- printk(KERN_DEBUG "dwc_otg_cleanup()\n");
-
- driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
- driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
-
- platform_driver_unregister(&dwc_otg_driver);
- ifx_usb_hc_remove();
-
- printk(KERN_INFO "%s module removed\n", dwc_driver_name);
-}
-module_exit(dwc_otg_cleanup);
-
-MODULE_DESCRIPTION(DWC_DRIVER_DESC);
-MODULE_AUTHOR("Synopsys Inc.");
-MODULE_LICENSE("GPL");
-
-module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
-MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
-module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
-MODULE_PARM_DESC(opt, "OPT Mode");
-module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
-MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
-module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
-MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
-module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
-MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
-module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
-MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
-module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
-MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
-module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
-MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
-module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
-MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
-module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
-MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
-MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
-MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
-module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
-MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
-MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
-MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
-module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
-/** @todo Set the max to 512K, modify checks */
-MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
-module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
-MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
-module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
-MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
-module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
-MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
-module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
-MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
-module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
-MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
-module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
-MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
-module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
-MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
-module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
-MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
-module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
-MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
-module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
-MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
-module_param_named(debug, g_dbg_lvl, int, 0444);
-MODULE_PARM_DESC(debug, "0");
-module_param_named(en_multiple_tx_fifo,
- dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
-MODULE_PARM_DESC(en_multiple_tx_fifo,
- "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
-module_param_named(dev_tx_fifo_size_1,
- dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_2,
- dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_3,
- dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_4,
- dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_5,
- dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_6,
- dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_7,
- dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_8,
- dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_9,
- dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_10,
- dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_11,
- dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_12,
- dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_13,
- dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_14,
- dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
-module_param_named(dev_tx_fifo_size_15,
- dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
-MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
-module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
-MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit"
- "0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
-module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
-MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
-module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
-MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
-module_param_named (iomem_base, dwc_iomem_base, ulong, 0444);
-MODULE_PARM_DESC (dwc_iomem_base, "The base address of the DWC_OTG register.");
-module_param_named (irq, dwc_irq, int, 0444);
-MODULE_PARM_DESC (dwc_irq, "The interrupt number");
-
-/** @page "Module Parameters"
- *
- * The following parameters may be specified when starting the module.
- * These parameters define how the DWC_otg controller should be
- * configured. Parameter values are passed to the CIL initialization
- * function dwc_otg_cil_init
- *
- * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
- *
-
- <table>
- <tr><td>Parameter Name</td><td>Meaning</td></tr>
-
- <tr>
- <td>otg_cap</td>
- <td>Specifies the OTG capabilities. The driver will automatically detect the
- value for this parameter if none is specified.
- - 0: HNP and SRP capable (default, if available)
- - 1: SRP Only capable
- - 2: No HNP/SRP capable
- </td></tr>
-
- <tr>
- <td>dma_enable</td>
- <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
- The driver will automatically detect the value for this parameter if none is
- specified.
- - 0: Slave
- - 1: DMA (default, if available)
- </td></tr>
-
- <tr>
- <td>dma_burst_size</td>
- <td>The DMA Burst size (applicable only for External DMA Mode).
- - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
- </td></tr>
-
- <tr>
- <td>speed</td>
- <td>Specifies the maximum speed of operation in host and device mode. The
- actual speed depends on the speed of the attached device and the value of
- phy_type.
- - 0: High Speed (default)
- - 1: Full Speed
- </td></tr>
-
- <tr>
- <td>host_support_fs_ls_low_power</td>
- <td>Specifies whether low power mode is supported when attached to a Full
- Speed or Low Speed device in host mode.
- - 0: Don't support low power mode (default)
- - 1: Support low power mode
- </td></tr>
-
- <tr>
- <td>host_ls_low_power_phy_clk</td>
- <td>Specifies the PHY clock rate in low power mode when connected to a Low
- Speed device in host mode. This parameter is applicable only if
- HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
- - 0: 48 MHz (default)
- - 1: 6 MHz
- </td></tr>
-
- <tr>
- <td>enable_dynamic_fifo</td>
- <td> Specifies whether FIFOs may be resized by the driver software.
- - 0: Use cC FIFO size parameters
- - 1: Allow dynamic FIFO sizing (default)
- </td></tr>
-
- <tr>
- <td>data_fifo_size</td>
- <td>Total number of 4-byte words in the data FIFO memory. This memory
- includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
- - Values: 32 to 32768 (default 8192)
-
- Note: The total FIFO memory depth in the FPGA configuration is 8192.
- </td></tr>
-
- <tr>
- <td>dev_rx_fifo_size</td>
- <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
- FIFO sizing is enabled.
- - Values: 16 to 32768 (default 1064)
- </td></tr>
-
- <tr>
- <td>dev_nperio_tx_fifo_size</td>
- <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
- dynamic FIFO sizing is enabled.
- - Values: 16 to 32768 (default 1024)
- </td></tr>
-
- <tr>
- <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
- <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
- when dynamic FIFO sizing is enabled.
- - Values: 4 to 768 (default 256)
- </td></tr>
-
- <tr>
- <td>host_rx_fifo_size</td>
- <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
- sizing is enabled.
- - Values: 16 to 32768 (default 1024)
- </td></tr>
-
- <tr>
- <td>host_nperio_tx_fifo_size</td>
- <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
- dynamic FIFO sizing is enabled in the core.
- - Values: 16 to 32768 (default 1024)
- </td></tr>
-
- <tr>
- <td>host_perio_tx_fifo_size</td>
- <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
- sizing is enabled.
- - Values: 16 to 32768 (default 1024)
- </td></tr>
-
- <tr>
- <td>max_transfer_size</td>
- <td>The maximum transfer size supported in bytes.
- - Values: 2047 to 65,535 (default 65,535)
- </td></tr>
-
- <tr>
- <td>max_packet_count</td>
- <td>The maximum number of packets in a transfer.
- - Values: 15 to 511 (default 511)
- </td></tr>
-
- <tr>
- <td>host_channels</td>
- <td>The number of host channel registers to use.
- - Values: 1 to 16 (default 12)
-
- Note: The FPGA configuration supports a maximum of 12 host channels.
- </td></tr>
-
- <tr>
- <td>dev_endpoints</td>
- <td>The number of endpoints in addition to EP0 available for device mode
- operations.
- - Values: 1 to 15 (default 6 IN and OUT)
-
- Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
- addition to EP0.
- </td></tr>
-
- <tr>
- <td>phy_type</td>
- <td>Specifies the type of PHY interface to use. By default, the driver will
- automatically detect the phy_type.
- - 0: Full Speed
- - 1: UTMI+ (default, if available)
- - 2: ULPI
- </td></tr>
-
- <tr>
- <td>phy_utmi_width</td>
- <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
- phy_type of UTMI+. Also, this parameter is applicable only if the
- OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
- core has been configured to work at either data path width.
- - Values: 8 or 16 bits (default 16)
- </td></tr>
-
- <tr>
- <td>phy_ulpi_ddr</td>
- <td>Specifies whether the ULPI operates at double or single data rate. This
- parameter is only applicable if phy_type is ULPI.
- - 0: single data rate ULPI interface with 8 bit wide data bus (default)
- - 1: double data rate ULPI interface with 4 bit wide data bus
- </td></tr>
-
- <tr>
- <td>i2c_enable</td>
- <td>Specifies whether to use the I2C interface for full speed PHY. This
- parameter is only applicable if PHY_TYPE is FS.
- - 0: Disabled (default)
- - 1: Enabled
- </td></tr>
-
- <tr>
- <td>otg_en_multiple_tx_fifo</td>
- <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
- The driver will automatically detect the value for this parameter if none is
- specified.
- - 0: Disabled
- - 1: Enabled (default, if available)
- </td></tr>
-
- <tr>
- <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
- <td>Number of 4-byte words in each of the Tx FIFOs in device mode
- when dynamic FIFO sizing is enabled.
- - Values: 4 to 768 (default 256)
- </td></tr>
-
-*/
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_driver.h b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_driver.h
deleted file mode 100644
index 7e6940dd13..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_driver.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.h $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 510275 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#if !defined(__DWC_OTG_DRIVER_H__)
-#define __DWC_OTG_DRIVER_H__
-
-/** @file
- * This file contains the interface to the Linux driver.
- */
-#include "dwc_otg_cil.h"
-
-/* Type declarations */
-struct dwc_otg_pcd;
-struct dwc_otg_hcd;
-
-/**
- * This structure is a wrapper that encapsulates the driver components used to
- * manage a single DWC_otg controller.
- */
-typedef struct dwc_otg_device
-{
- /** Base address returned from ioremap() */
- void *base;
-
- /** Pointer to the core interface structure. */
- dwc_otg_core_if_t *core_if;
-
- /** Register offset for Diagnostic API.*/
- uint32_t reg_offset;
-
- /** Pointer to the PCD structure. */
- struct dwc_otg_pcd *pcd;
-
- /** Pointer to the HCD structure. */
- struct dwc_otg_hcd *hcd;
-
- /** Flag to indicate whether the common IRQ handler is installed. */
- uint8_t common_irq_installed;
-
- /** Interrupt request number. */
- unsigned int irq;
-
- /** Physical address of Control and Status registers, used by
- * release_mem_region().
- */
- resource_size_t phys_addr;
-
- /** Length of memory region, used by release_mem_region(). */
- unsigned long base_len;
-} dwc_otg_device_t;
-
-//#define dev_dbg(fake, format, arg...) printk(KERN_CRIT __FILE__ ":%d: " format "\n" , __LINE__, ## arg)
-
-#endif
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.c b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.c
deleted file mode 100644
index ad6bc72ce8..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.c
+++ /dev/null
@@ -1,2870 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.c $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 631780 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-
-/**
- * @file
- *
- * This file contains the implementation of the HCD. In Linux, the HCD
- * implements the hc_driver API.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-
-#include <linux/device.h>
-
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-
-#include <linux/dma-mapping.h>
-
-#include "dwc_otg_driver.h"
-#include "dwc_otg_hcd.h"
-#include "dwc_otg_regs.h"
-
-#include <asm/irq.h>
-#include "dwc_otg_ifx.h" // for Infineon platform specific.
-extern atomic_t release_later;
-
-static u64 dma_mask = DMA_BIT_MASK(32);
-
-static const char dwc_otg_hcd_name [] = "dwc_otg_hcd";
-static const struct hc_driver dwc_otg_hc_driver =
-{
- .description = dwc_otg_hcd_name,
- .product_desc = "DWC OTG Controller",
- .hcd_priv_size = sizeof(dwc_otg_hcd_t),
- .irq = dwc_otg_hcd_irq,
- .flags = HCD_MEMORY | HCD_USB2,
- //.reset =
- .start = dwc_otg_hcd_start,
- //.suspend =
- //.resume =
- .stop = dwc_otg_hcd_stop,
- .urb_enqueue = dwc_otg_hcd_urb_enqueue,
- .urb_dequeue = dwc_otg_hcd_urb_dequeue,
- .endpoint_disable = dwc_otg_hcd_endpoint_disable,
- .get_frame_number = dwc_otg_hcd_get_frame_number,
- .hub_status_data = dwc_otg_hcd_hub_status_data,
- .hub_control = dwc_otg_hcd_hub_control,
- //.hub_suspend =
- //.hub_resume =
-};
-
-
-/**
- * Work queue function for starting the HCD when A-Cable is connected.
- * The dwc_otg_hcd_start() must be called in a process context.
- */
-static void hcd_start_func(struct work_struct *work)
-{
- struct dwc_otg_hcd *priv =
- container_of(work, struct dwc_otg_hcd, start_work);
- struct usb_hcd *usb_hcd = (struct usb_hcd *)priv->_p;
- DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
- if (usb_hcd) {
- dwc_otg_hcd_start(usb_hcd);
- }
-}
-
-
-/**
- * HCD Callback function for starting the HCD when A-Cable is
- * connected.
- *
- * @param _p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_start_cb(void *_p)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p);
- dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
- hprt0_data_t hprt0;
- if (core_if->op_state == B_HOST) {
- /*
- * Reset the port. During a HNP mode switch the reset
- * needs to occur within 1ms and have a duration of at
- * least 50ms.
- */
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- hprt0.b.prtrst = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- ((struct usb_hcd *)_p)->self.is_b_host = 1;
- } else {
- ((struct usb_hcd *)_p)->self.is_b_host = 0;
- }
- /* Need to start the HCD in a non-interrupt context. */
- INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
- dwc_otg_hcd->_p = _p;
- schedule_work(&dwc_otg_hcd->start_work);
- return 1;
-}
-
-
-/**
- * HCD Callback function for stopping the HCD.
- *
- * @param _p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_stop_cb( void *_p )
-{
- struct usb_hcd *usb_hcd = (struct usb_hcd *)_p;
- DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
- dwc_otg_hcd_stop( usb_hcd );
- return 1;
-}
-static void del_xfer_timers(dwc_otg_hcd_t *_hcd)
-{
-#ifdef DEBUG
- int i;
- int num_channels = _hcd->core_if->core_params->host_channels;
- for (i = 0; i < num_channels; i++) {
- del_timer(&_hcd->core_if->hc_xfer_timer[i]);
- }
-#endif /* */
-}
-
-static void del_timers(dwc_otg_hcd_t *_hcd)
-{
- del_xfer_timers(_hcd);
- del_timer(&_hcd->conn_timer);
-}
-
-/**
- * Processes all the URBs in a single list of QHs. Completes them with
- * -ETIMEDOUT and frees the QTD.
- */
-static void kill_urbs_in_qh_list(dwc_otg_hcd_t * _hcd,
- struct list_head *_qh_list)
-{
- struct list_head *qh_item;
- dwc_otg_qh_t *qh;
- struct list_head *qtd_item;
- dwc_otg_qtd_t *qtd;
-
- list_for_each(qh_item, _qh_list) {
- qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
- for (qtd_item = qh->qtd_list.next; qtd_item != &qh->qtd_list;
- qtd_item = qh->qtd_list.next) {
- qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
- if (qtd->urb != NULL) {
- dwc_otg_hcd_complete_urb(_hcd, qtd->urb,-ETIMEDOUT);
- }
- dwc_otg_hcd_qtd_remove_and_free(qtd);
- }
- }
-}
-
-/**
- * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
- * and periodic schedules. The QTD associated with each URB is removed from
- * the schedule and freed. This function may be called when a disconnect is
- * detected or when the HCD is being stopped.
- */
-static void kill_all_urbs(dwc_otg_hcd_t *_hcd)
-{
- kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_deferred);
- kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_inactive);
- kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_active);
- kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_inactive);
- kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_ready);
- kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_assigned);
- kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_queued);
-}
-
-/**
- * HCD Callback function for disconnect of the HCD.
- *
- * @param _p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_disconnect_cb( void *_p )
-{
- gintsts_data_t intr;
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p);
-
- DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
-
- /*
- * Set status flags for the hub driver.
- */
- dwc_otg_hcd->flags.b.port_connect_status_change = 1;
- dwc_otg_hcd->flags.b.port_connect_status = 0;
-
- /*
- * Shutdown any transfers in process by clearing the Tx FIFO Empty
- * interrupt mask and status bits and disabling subsequent host
- * channel interrupts.
- */
- intr.d32 = 0;
- intr.b.nptxfempty = 1;
- intr.b.ptxfempty = 1;
- intr.b.hcintr = 1;
- dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
- dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
-
- del_timers(dwc_otg_hcd);
-
- /*
- * Turn off the vbus power only if the core has transitioned to device
- * mode. If still in host mode, need to keep power on to detect a
- * reconnection.
- */
- if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
- if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
- hprt0_data_t hprt0 = { .d32=0 };
- DWC_PRINT("Disconnect: PortPower off\n");
- hprt0.b.prtpwr = 0;
- dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
- }
-
- dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if );
- }
-
- /* Respond with an error status to all URBs in the schedule. */
- kill_all_urbs(dwc_otg_hcd);
-
- if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
- /* Clean up any host channels that were in use. */
- int num_channels;
- int i;
- dwc_hc_t *channel;
- dwc_otg_hc_regs_t *hc_regs;
- hcchar_data_t hcchar;
-
- num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-
- if (!dwc_otg_hcd->core_if->dma_enable) {
- /* Flush out any channel requests in slave mode. */
- for (i = 0; i < num_channels; i++) {
- channel = dwc_otg_hcd->hc_ptr_array[i];
- if (list_empty(&channel->hc_list_entry)) {
- hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- hcchar.b.chen = 0;
- hcchar.b.chdis = 1;
- hcchar.b.epdir = 0;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- }
- }
- }
- }
-
- for (i = 0; i < num_channels; i++) {
- channel = dwc_otg_hcd->hc_ptr_array[i];
- if (list_empty(&channel->hc_list_entry)) {
- hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- /* Halt the channel. */
- hcchar.b.chdis = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- }
-
- dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
- list_add_tail(&channel->hc_list_entry,
- &dwc_otg_hcd->free_hc_list);
- }
- }
- }
-
- /* A disconnect will end the session so the B-Device is no
- * longer a B-host. */
- ((struct usb_hcd *)_p)->self.is_b_host = 0;
-
- return 1;
-}
-
-/**
- * Connection timeout function. An OTG host is required to display a
- * message if the device does not connect within 10 seconds.
- */
-void dwc_otg_hcd_connect_timeout( unsigned long _ptr )
-{
- DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)_ptr);
- DWC_PRINT( "Connect Timeout\n");
- DWC_ERROR( "Device Not Connected/Responding\n" );
-}
-
-/**
- * Start the connection timer. An OTG host is required to display a
- * message if the device does not connect within 10 seconds. The
- * timer is deleted if a port connect interrupt occurs before the
- * timer expires.
- */
-static void dwc_otg_hcd_start_connect_timer( dwc_otg_hcd_t *_hcd)
-{
- init_timer( &_hcd->conn_timer );
- _hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
- _hcd->conn_timer.data = (unsigned long)0;
- _hcd->conn_timer.expires = jiffies + (HZ*10);
- add_timer( &_hcd->conn_timer );
-}
-
-/**
- * HCD Callback function for disconnect of the HCD.
- *
- * @param _p void pointer to the <code>struct usb_hcd</code>
- */
-static int32_t dwc_otg_hcd_session_start_cb( void *_p )
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p);
- DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
- dwc_otg_hcd_start_connect_timer( dwc_otg_hcd );
- return 1;
-}
-
-/**
- * HCD Callback structure for handling mode switching.
- */
-static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
- .start = dwc_otg_hcd_start_cb,
- .stop = dwc_otg_hcd_stop_cb,
- .disconnect = dwc_otg_hcd_disconnect_cb,
- .session_start = dwc_otg_hcd_session_start_cb,
- .p = 0,
-};
-
-
-/**
- * Reset tasklet function
- */
-static void reset_tasklet_func (unsigned long data)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t*)data;
- dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
- hprt0_data_t hprt0;
-
- DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
-
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- hprt0.b.prtrst = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- mdelay (60);
-
- hprt0.b.prtrst = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- dwc_otg_hcd->flags.b.port_reset_change = 1;
-
- return;
-}
-
-static struct tasklet_struct reset_tasklet = {
- .next = NULL,
- .state = 0,
- .count = ATOMIC_INIT(0),
- .func = reset_tasklet_func,
- .data = 0,
-};
-
-/**
- * Initializes the HCD. This function allocates memory for and initializes the
- * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
- * USB bus with the core and calls the hc_driver->start() function. It returns
- * a negative error on failure.
- */
-int init_hcd_usecs(dwc_otg_hcd_t *_hcd);
-
-int __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device)
-{
- struct usb_hcd *hcd = NULL;
- dwc_otg_hcd_t *dwc_otg_hcd = NULL;
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-
- int num_channels;
- int i;
- dwc_hc_t *channel;
-
- int retval = 0;
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
-
- /*
- * Allocate memory for the base HCD plus the DWC OTG HCD.
- * Initialize the base HCD.
- */
- hcd = usb_create_hcd(&dwc_otg_hc_driver, _dev, dev_name(_dev));
- if (hcd == NULL) {
- retval = -ENOMEM;
- goto error1;
- }
- dev_set_drvdata(_dev, dwc_otg_device); /* fscz restore */
- hcd->regs = otg_dev->base;
- hcd->rsrc_start = (int)otg_dev->base;
-
- hcd->self.otg_port = 1;
-
- /* Initialize the DWC OTG HCD. */
- dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
- dwc_otg_hcd->core_if = otg_dev->core_if;
- otg_dev->hcd = dwc_otg_hcd;
-
- /* Register the HCD CIL Callbacks */
- dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if,
- &hcd_cil_callbacks, hcd);
-
- /* Initialize the non-periodic schedule. */
- INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
- INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
- INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_deferred);
-
- /* Initialize the periodic schedule. */
- INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
- INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
- INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
- INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
-
- /*
- * Create a host channel descriptor for each host channel implemented
- * in the controller. Initialize the channel descriptor array.
- */
- INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
- num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
- for (i = 0; i < num_channels; i++) {
- channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
- if (channel == NULL) {
- retval = -ENOMEM;
- DWC_ERROR("%s: host channel allocation failed\n", __func__);
- goto error2;
- }
- memset(channel, 0, sizeof(dwc_hc_t));
- channel->hc_num = i;
- dwc_otg_hcd->hc_ptr_array[i] = channel;
-#ifdef DEBUG
- init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
-#endif
-
- DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
- }
-
- /* Initialize the Connection timeout timer. */
- init_timer( &dwc_otg_hcd->conn_timer );
-
- /* Initialize reset tasklet. */
- reset_tasklet.data = (unsigned long) dwc_otg_hcd;
- dwc_otg_hcd->reset_tasklet = &reset_tasklet;
-
- /* Set device flags indicating whether the HCD supports DMA. */
- if (otg_dev->core_if->dma_enable) {
- DWC_PRINT("Using DMA mode\n");
- //_dev->dma_mask = (void *)~0;
- //_dev->coherent_dma_mask = ~0;
- _dev->dma_mask = &dma_mask;
- _dev->coherent_dma_mask = DMA_BIT_MASK(32);
- } else {
- DWC_PRINT("Using Slave mode\n");
- _dev->dma_mask = (void *)0;
- _dev->coherent_dma_mask = 0;
- }
-
- init_hcd_usecs(dwc_otg_hcd);
- /*
- * Finish generic HCD initialization and start the HCD. This function
- * allocates the DMA buffer pool, registers the USB bus, requests the
- * IRQ line, and calls dwc_otg_hcd_start method.
- */
- retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
- if (retval < 0) {
- goto error2;
- }
-
- /*
- * Allocate space for storing data on status transactions. Normally no
- * data is sent, but this space acts as a bit bucket. This must be
- * done after usb_add_hcd since that function allocates the DMA buffer
- * pool.
- */
- if (otg_dev->core_if->dma_enable) {
- dwc_otg_hcd->status_buf =
- dma_alloc_coherent(_dev,
- DWC_OTG_HCD_STATUS_BUF_SIZE,
- &dwc_otg_hcd->status_buf_dma,
- GFP_KERNEL | GFP_DMA);
- } else {
- dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
- GFP_KERNEL);
- }
- if (dwc_otg_hcd->status_buf == NULL) {
- retval = -ENOMEM;
- DWC_ERROR("%s: status_buf allocation failed\n", __func__);
- goto error3;
- }
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n",
- dev_name(_dev), hcd->self.busnum);
-
- return 0;
-
- /* Error conditions */
-error3:
- usb_remove_hcd(hcd);
-error2:
- dwc_otg_hcd_free(hcd);
- usb_put_hcd(hcd);
-error1:
- return retval;
-}
-
-/**
- * Removes the HCD.
- * Frees memory and resources associated with the HCD and deregisters the bus.
- */
-void dwc_otg_hcd_remove(struct device *_dev)
-{
- dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
- dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd;
- struct usb_hcd *hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
-
- /* Turn off all interrupts */
- dwc_write_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
- dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
-
- usb_remove_hcd(hcd);
-
- dwc_otg_hcd_free(hcd);
-
- usb_put_hcd(hcd);
-
- return;
-}
-
-
-/* =========================================================================
- * Linux HC Driver Functions
- * ========================================================================= */
-
-/**
- * Initializes dynamic portions of the DWC_otg HCD state.
- */
-static void hcd_reinit(dwc_otg_hcd_t *_hcd)
-{
- struct list_head *item;
- int num_channels;
- int i;
- dwc_hc_t *channel;
-
- _hcd->flags.d32 = 0;
-
- _hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched_active;
- _hcd->available_host_channels = _hcd->core_if->core_params->host_channels;
-
- /*
- * Put all channels in the free channel list and clean up channel
- * states.
- */
- item = _hcd->free_hc_list.next;
- while (item != &_hcd->free_hc_list) {
- list_del(item);
- item = _hcd->free_hc_list.next;
- }
- num_channels = _hcd->core_if->core_params->host_channels;
- for (i = 0; i < num_channels; i++) {
- channel = _hcd->hc_ptr_array[i];
- list_add_tail(&channel->hc_list_entry, &_hcd->free_hc_list);
- dwc_otg_hc_cleanup(_hcd->core_if, channel);
- }
-
- /* Initialize the DWC core for host mode operation. */
- dwc_otg_core_host_init(_hcd->core_if);
-}
-
-/** Initializes the DWC_otg controller and its root hub and prepares it for host
- * mode operation. Activates the root port. Returns 0 on success and a negative
- * error code on failure. */
-int dwc_otg_hcd_start(struct usb_hcd *_hcd)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
- dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if;
- struct usb_bus *bus;
-
- // int retval;
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
-
- bus = hcd_to_bus(_hcd);
-
- /* Initialize the bus state. If the core is in Device Mode
- * HALT the USB bus and return. */
- if (dwc_otg_is_device_mode (core_if)) {
- _hcd->state = HC_STATE_HALT;
- return 0;
- }
- _hcd->state = HC_STATE_RUNNING;
-
- /* Initialize and connect root hub if one is not already attached */
- if (bus->root_hub) {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
- /* Inform the HUB driver to resume. */
- usb_hcd_resume_root_hub(_hcd);
- }
- else {
-#if 0
- struct usb_device *udev;
- udev = usb_alloc_dev(NULL, bus, 0);
- if (!udev) {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
- return -ENODEV;
- }
- udev->speed = USB_SPEED_HIGH;
- /* Not needed - VJ
- if ((retval = usb_hcd_register_root_hub(udev, _hcd)) != 0) {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval);
- return -ENODEV;
- }
- */
-#else
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
-#endif
- }
-
- hcd_reinit(dwc_otg_hcd);
-
- return 0;
-}
-
-static void qh_list_free(dwc_otg_hcd_t *_hcd, struct list_head *_qh_list)
-{
- struct list_head *item;
- dwc_otg_qh_t *qh;
-
- if (_qh_list->next == NULL) {
- /* The list hasn't been initialized yet. */
- return;
- }
-
- /* Ensure there are no QTDs or URBs left. */
- kill_urbs_in_qh_list(_hcd, _qh_list);
-
- for (item = _qh_list->next; item != _qh_list; item = _qh_list->next) {
- qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
- dwc_otg_hcd_qh_remove_and_free(_hcd, qh);
- }
-}
-
-/**
- * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
- * stopped.
- */
-void dwc_otg_hcd_stop(struct usb_hcd *_hcd)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
- hprt0_data_t hprt0 = { .d32=0 };
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
-
- /* Turn off all host-specific interrupts. */
- dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if );
-
- /*
- * The root hub should be disconnected before this function is called.
- * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
- * and the QH lists (via ..._hcd_endpoint_disable).
- */
-
- /* Turn off the vbus power */
- DWC_PRINT("PortPower off\n");
- hprt0.b.prtpwr = 0;
- dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
-
- return;
-}
-
-
-/** Returns the current frame number. */
-int dwc_otg_hcd_get_frame_number(struct usb_hcd *_hcd)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
- hfnum_data_t hfnum;
-
- hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
- host_if->host_global_regs->hfnum);
-
-#ifdef DEBUG_SOF
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
-#endif
- return hfnum.b.frnum;
-}
-
-/**
- * Frees secondary storage associated with the dwc_otg_hcd structure contained
- * in the struct usb_hcd field.
- */
-void dwc_otg_hcd_free(struct usb_hcd *_hcd)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
- int i;
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
-
- del_timers(dwc_otg_hcd);
-
- /* Free memory for QH/QTD lists */
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_deferred);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
- qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
-
- /* Free memory for the host channels. */
- for (i = 0; i < MAX_EPS_CHANNELS; i++) {
- dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
- if (hc != NULL) {
- DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
- kfree(hc);
- }
- }
-
- if (dwc_otg_hcd->core_if->dma_enable) {
- if (dwc_otg_hcd->status_buf_dma) {
- dma_free_coherent(_hcd->self.controller,
- DWC_OTG_HCD_STATUS_BUF_SIZE,
- dwc_otg_hcd->status_buf,
- dwc_otg_hcd->status_buf_dma);
- }
- } else if (dwc_otg_hcd->status_buf != NULL) {
- kfree(dwc_otg_hcd->status_buf);
- }
-
- return;
-}
-
-
-#ifdef DEBUG
-static void dump_urb_info(struct urb *_urb, char* _fn_name)
-{
- DWC_PRINT("%s, urb %p\n", _fn_name, _urb);
- DWC_PRINT(" Device address: %d\n", usb_pipedevice(_urb->pipe));
- DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(_urb->pipe),
- (usb_pipein(_urb->pipe) ? "IN" : "OUT"));
- DWC_PRINT(" Endpoint type: %s\n",
- ({char *pipetype;
- switch (usb_pipetype(_urb->pipe)) {
- case PIPE_CONTROL: pipetype = "CONTROL"; break;
- case PIPE_BULK: pipetype = "BULK"; break;
- case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
- case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
- default: pipetype = "UNKNOWN"; break;
- }; pipetype;}));
- DWC_PRINT(" Speed: %s\n",
- ({char *speed;
- switch (_urb->dev->speed) {
- case USB_SPEED_HIGH: speed = "HIGH"; break;
- case USB_SPEED_FULL: speed = "FULL"; break;
- case USB_SPEED_LOW: speed = "LOW"; break;
- default: speed = "UNKNOWN"; break;
- }; speed;}));
- DWC_PRINT(" Max packet size: %d\n",
- usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe)));
- DWC_PRINT(" Data buffer length: %d\n", _urb->transfer_buffer_length);
- DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n",
- _urb->transfer_buffer, (void *)_urb->transfer_dma);
- DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n",
- _urb->setup_packet, (void *)_urb->setup_dma);
- DWC_PRINT(" Interval: %d\n", _urb->interval);
- if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) {
- int i;
- for (i = 0; i < _urb->number_of_packets; i++) {
- DWC_PRINT(" ISO Desc %d:\n", i);
- DWC_PRINT(" offset: %d, length %d\n",
- _urb->iso_frame_desc[i].offset,
- _urb->iso_frame_desc[i].length);
- }
- }
-}
-
-static void dump_channel_info(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *qh)
-{
- if (qh->channel != NULL) {
- dwc_hc_t *hc = qh->channel;
- struct list_head *item;
- dwc_otg_qh_t *qh_item;
- int num_channels = _hcd->core_if->core_params->host_channels;
- int i;
-
- dwc_otg_hc_regs_t *hc_regs;
- hcchar_data_t hcchar;
- hcsplt_data_t hcsplt;
- hctsiz_data_t hctsiz;
- uint32_t hcdma;
-
- hc_regs = _hcd->core_if->host_if->hc_regs[hc->hc_num];
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
- hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
- hcdma = dwc_read_reg32(&hc_regs->hcdma);
-
- DWC_PRINT(" Assigned to channel %p:\n", hc);
- DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
- DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
- DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
- hc->dev_addr, hc->ep_num, hc->ep_is_in);
- DWC_PRINT(" ep_type: %d\n", hc->ep_type);
- DWC_PRINT(" max_packet: %d\n", hc->max_packet);
- DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
- DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
- DWC_PRINT(" halt_status: %d\n", hc->halt_status);
- DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
- DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
- DWC_PRINT(" qh: %p\n", hc->qh);
- DWC_PRINT(" NP inactive sched:\n");
- list_for_each(item, &_hcd->non_periodic_sched_inactive) {
- qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
- DWC_PRINT(" %p\n", qh_item);
- } DWC_PRINT(" NP active sched:\n");
- list_for_each(item, &_hcd->non_periodic_sched_deferred) {
- qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
- DWC_PRINT(" %p\n", qh_item);
- } DWC_PRINT(" NP deferred sched:\n");
- list_for_each(item, &_hcd->non_periodic_sched_active) {
- qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
- DWC_PRINT(" %p\n", qh_item);
- } DWC_PRINT(" Channels: \n");
- for (i = 0; i < num_channels; i++) {
- dwc_hc_t *hc = _hcd->hc_ptr_array[i];
- DWC_PRINT(" %2d: %p\n", i, hc);
- }
- }
-}
-#endif // DEBUG
-
-/** Starts processing a USB transfer request specified by a USB Request Block
- * (URB). mem_flags indicates the type of memory allocation to use while
- * processing this URB. */
-int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd,
- struct urb *_urb,
- gfp_t _mem_flags)
-{
- unsigned long flags;
- int retval;
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
- dwc_otg_qtd_t *qtd;
-
- local_irq_save(flags);
- retval = usb_hcd_link_urb_to_ep(_hcd, _urb);
- if (retval) {
- local_irq_restore(flags);
- return retval;
- }
-#ifdef DEBUG
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
- dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue");
- }
-#endif // DEBUG
- if (!dwc_otg_hcd->flags.b.port_connect_status) {
- /* No longer connected. */
- local_irq_restore(flags);
- return -ENODEV;
- }
-
- qtd = dwc_otg_hcd_qtd_create (_urb);
- if (qtd == NULL) {
- local_irq_restore(flags);
- DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
- return -ENOMEM;
- }
-
- retval = dwc_otg_hcd_qtd_add (qtd, dwc_otg_hcd);
- if (retval < 0) {
- DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
- "Error status %d\n", retval);
- dwc_otg_hcd_qtd_free(qtd);
- }
-
- local_irq_restore (flags);
- return retval;
-}
-
-/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
- * success. */
-int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status)
-{
- unsigned long flags;
- dwc_otg_hcd_t *dwc_otg_hcd;
- dwc_otg_qtd_t *urb_qtd;
- dwc_otg_qh_t *qh;
- int retval;
- //struct usb_host_endpoint *_ep = NULL;
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
-
- local_irq_save(flags);
-
- retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status);
- if (retval) {
- local_irq_restore(flags);
- return retval;
- }
-
- dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
- urb_qtd = (dwc_otg_qtd_t *)_urb->hcpriv;
- if (urb_qtd == NULL) {
- printk("urb_qtd is NULL for _urb %08x\n",(unsigned)_urb);
- goto done;
- }
- qh = (dwc_otg_qh_t *) urb_qtd->qtd_qh_ptr;
- if (qh == NULL) {
- goto done;
- }
-
-#ifdef DEBUG
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
- dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue");
- if (urb_qtd == qh->qtd_in_process) {
- dump_channel_info(dwc_otg_hcd, qh);
- }
- }
-#endif // DEBUG
-
- if (urb_qtd == qh->qtd_in_process) {
- /* The QTD is in process (it has been assigned to a channel). */
-
- if (dwc_otg_hcd->flags.b.port_connect_status) {
- /*
- * If still connected (i.e. in host mode), halt the
- * channel so it can be used for other transfers. If
- * no longer connected, the host registers can't be
- * written to halt the channel since the core is in
- * device mode.
- */
- dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
- DWC_OTG_HC_XFER_URB_DEQUEUE);
- }
- }
-
- /*
- * Free the QTD and clean up the associated QH. Leave the QH in the
- * schedule if it has any remaining QTDs.
- */
- dwc_otg_hcd_qtd_remove_and_free(urb_qtd);
- if (urb_qtd == qh->qtd_in_process) {
- dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
- qh->channel = NULL;
- qh->qtd_in_process = NULL;
- } else if (list_empty(&qh->qtd_list)) {
- dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
- }
-
-done:
- local_irq_restore(flags);
- _urb->hcpriv = NULL;
-
- /* Higher layer software sets URB status. */
- usb_hcd_unlink_urb_from_ep(_hcd, _urb);
- usb_hcd_giveback_urb(_hcd, _urb, _status);
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
- DWC_PRINT("Called usb_hcd_giveback_urb()\n");
- DWC_PRINT(" urb->status = %d\n", _urb->status);
- }
-
- return 0;
-}
-
-
-/** Frees resources in the DWC_otg controller related to a given endpoint. Also
- * clears state in the HCD related to the endpoint. Any URBs for the endpoint
- * must already be dequeued. */
-void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd,
- struct usb_host_endpoint *_ep)
-
-{
- dwc_otg_qh_t *qh;
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
- "endpoint=%d\n", _ep->desc.bEndpointAddress,
- dwc_ep_addr_to_endpoint(_ep->desc.bEndpointAddress));
-
- qh = (dwc_otg_qh_t *)(_ep->hcpriv);
- if (qh != NULL) {
-#ifdef DEBUG
- /** Check that the QTD list is really empty */
- if (!list_empty(&qh->qtd_list)) {
- DWC_WARN("DWC OTG HCD EP DISABLE:"
- " QTD List for this endpoint is not empty\n");
- }
-#endif // DEBUG
-
- dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
- _ep->hcpriv = NULL;
- }
-
- return;
-}
-extern int dwc_irq;
-/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
- * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
- * interrupt.
- *
- * This function is called by the USB core when an interrupt occurs */
-irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *_hcd)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
-
- mask_and_ack_ifx_irq (dwc_irq);
- return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd));
-}
-
-/** Creates Status Change bitmap for the root hub and root port. The bitmap is
- * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
- * is the status change indicator for the single root port. Returns 1 if either
- * change indicator is 1, otherwise returns 0. */
-int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_buf)
-{
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
-
- _buf[0] = 0;
- _buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
- dwc_otg_hcd->flags.b.port_reset_change ||
- dwc_otg_hcd->flags.b.port_enable_change ||
- dwc_otg_hcd->flags.b.port_suspend_change ||
- dwc_otg_hcd->flags.b.port_over_current_change) << 1;
-
-#ifdef DEBUG
- if (_buf[0]) {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
- " Root port status changed\n");
- DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
- dwc_otg_hcd->flags.b.port_connect_status_change);
- DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
- dwc_otg_hcd->flags.b.port_reset_change);
- DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
- dwc_otg_hcd->flags.b.port_enable_change);
- DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
- dwc_otg_hcd->flags.b.port_suspend_change);
- DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
- dwc_otg_hcd->flags.b.port_over_current_change);
- }
-#endif // DEBUG
- return (_buf[0] != 0);
-}
-
-#ifdef DWC_HS_ELECT_TST
-/*
- * Quick and dirty hack to implement the HS Electrical Test
- * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
- *
- * This code was copied from our userspace app "hset". It sends a
- * Get Device Descriptor control sequence in two parts, first the
- * Setup packet by itself, followed some time later by the In and
- * Ack packets. Rather than trying to figure out how to add this
- * functionality to the normal driver code, we just hijack the
- * hardware, using these two function to drive the hardware
- * directly.
- */
-
-dwc_otg_core_global_regs_t *global_regs;
-dwc_otg_host_global_regs_t *hc_global_regs;
-dwc_otg_hc_regs_t *hc_regs;
-uint32_t *data_fifo;
-
-static void do_setup(void)
-{
- gintsts_data_t gintsts;
- hctsiz_data_t hctsiz;
- hcchar_data_t hcchar;
- haint_data_t haint;
- hcint_data_t hcint;
-
- /* Enable HAINTs */
- dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-
- /* Enable HCINTs */
- dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /*
- * Send Setup packet (Get Device Descriptor)
- */
-
- /* Make sure channel is disabled */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
- hcchar.b.chdis = 1;
- // hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- //sleep(1);
- MDELAY(1000);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //if (hcchar.b.chen) {
- // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
- //}
- }
-
- /* Set HCTSIZ */
- hctsiz.d32 = 0;
- hctsiz.b.xfersize = 8;
- hctsiz.b.pktcnt = 1;
- hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
- dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
- /* Set HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
- hcchar.b.epdir = 0;
- hcchar.b.epnum = 0;
- hcchar.b.mps = 8;
- hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
- /* Fill FIFO with Setup data for Get Device Descriptor */
- data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
- dwc_write_reg32(data_fifo++, 0x01000680);
- dwc_write_reg32(data_fifo++, 0x00080000);
-
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for host channel interrupt */
- do {
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- } while (gintsts.b.hcintr == 0);
-
- //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Disable HCINTs */
- dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-
- /* Disable HAINTs */
- dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-}
-
-static void do_in_ack(void)
-{
- gintsts_data_t gintsts;
- hctsiz_data_t hctsiz;
- hcchar_data_t hcchar;
- haint_data_t haint;
- hcint_data_t hcint;
- host_grxsts_data_t grxsts;
-
- /* Enable HAINTs */
- dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-
- /* Enable HCINTs */
- dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /*
- * Receive Control In packet
- */
-
- /* Make sure channel is disabled */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
- hcchar.b.chdis = 1;
- hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- //sleep(1);
- MDELAY(1000);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //if (hcchar.b.chen) {
- // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
- //}
- }
-
- /* Set HCTSIZ */
- hctsiz.d32 = 0;
- hctsiz.b.xfersize = 8;
- hctsiz.b.pktcnt = 1;
- hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
- dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
- /* Set HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
- hcchar.b.epdir = 1;
- hcchar.b.epnum = 0;
- hcchar.b.mps = 8;
- hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for receive status queue interrupt */
- do {
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- } while (gintsts.b.rxstsqlvl == 0);
-
- //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Read RXSTS */
- grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
- //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-
- /* Clear RXSTSQLVL in GINTSTS */
- gintsts.d32 = 0;
- gintsts.b.rxstsqlvl = 1;
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- switch (grxsts.b.pktsts) {
- case DWC_GRXSTS_PKTSTS_IN:
- /* Read the data into the host buffer */
- if (grxsts.b.bcnt > 0) {
- int i;
- int word_count = (grxsts.b.bcnt + 3) / 4;
-
- data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-
- for (i = 0; i < word_count; i++) {
- (void)dwc_read_reg32(data_fifo++);
- }
- }
-
- //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
- break;
-
- default:
- //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
- break;
- }
-
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for receive status queue interrupt */
- do {
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- } while (gintsts.b.rxstsqlvl == 0);
-
- //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Read RXSTS */
- grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
- //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-
- /* Clear RXSTSQLVL in GINTSTS */
- gintsts.d32 = 0;
- gintsts.b.rxstsqlvl = 1;
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- switch (grxsts.b.pktsts) {
- case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
- break;
-
- default:
- //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
- break;
- }
-
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for host channel interrupt */
- do {
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- } while (gintsts.b.hcintr == 0);
-
- //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- // usleep(100000);
- // mdelay(100);
- MDELAY(1);
-
- /*
- * Send handshake packet
- */
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Make sure channel is disabled */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
- hcchar.b.chdis = 1;
- hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
- //sleep(1);
- MDELAY(1000);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //if (hcchar.b.chen) {
- // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
- //}
- }
-
- /* Set HCTSIZ */
- hctsiz.d32 = 0;
- hctsiz.b.xfersize = 0;
- hctsiz.b.pktcnt = 1;
- hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
- dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-
- /* Set HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
- hcchar.b.epdir = 0;
- hcchar.b.epnum = 0;
- hcchar.b.mps = 8;
- hcchar.b.chen = 1;
- dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for host channel interrupt */
- do {
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- } while (gintsts.b.hcintr == 0);
-
- //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-
- /* Disable HCINTs */
- dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-
- /* Disable HAINTs */
- dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-
- /* Read HAINT */
- haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-}
-#endif /* DWC_HS_ELECT_TST */
-
-/** Handles hub class-specific requests.*/
-int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd,
- u16 _typeReq,
- u16 _wValue,
- u16 _wIndex,
- char *_buf,
- u16 _wLength)
-{
- int retval = 0;
-
- dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
- dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd (_hcd)->core_if;
- struct usb_hub_descriptor *desc;
- hprt0_data_t hprt0 = {.d32 = 0};
-
- uint32_t port_status;
-
- switch (_typeReq) {
- case ClearHubFeature:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearHubFeature 0x%x\n", _wValue);
- switch (_wValue) {
- case C_HUB_LOCAL_POWER:
- case C_HUB_OVER_CURRENT:
- /* Nothing required here */
- break;
- default:
- retval = -EINVAL;
- DWC_ERROR ("DWC OTG HCD - "
- "ClearHubFeature request %xh unknown\n", _wValue);
- }
- break;
- case ClearPortFeature:
- if (!_wIndex || _wIndex > 1)
- goto error;
-
- switch (_wValue) {
- case USB_PORT_FEAT_ENABLE:
- DWC_DEBUGPL (DBG_ANY, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- hprt0.b.prtena = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_SUSPEND:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- hprt0.b.prtres = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- /* Clear Resume bit */
- mdelay (100);
- hprt0.b.prtres = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_POWER:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_POWER\n");
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- hprt0.b.prtpwr = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_INDICATOR:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
- /* Port inidicator not supported */
- break;
- case USB_PORT_FEAT_C_CONNECTION:
- /* Clears drivers internal connect status change
- * flag */
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
- dwc_otg_hcd->flags.b.port_connect_status_change = 0;
- break;
- case USB_PORT_FEAT_C_RESET:
- /* Clears the driver's internal Port Reset Change
- * flag */
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
- dwc_otg_hcd->flags.b.port_reset_change = 0;
- break;
- case USB_PORT_FEAT_C_ENABLE:
- /* Clears the driver's internal Port
- * Enable/Disable Change flag */
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
- dwc_otg_hcd->flags.b.port_enable_change = 0;
- break;
- case USB_PORT_FEAT_C_SUSPEND:
- /* Clears the driver's internal Port Suspend
- * Change flag, which is set when resume signaling on
- * the host port is complete */
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
- dwc_otg_hcd->flags.b.port_suspend_change = 0;
- break;
- case USB_PORT_FEAT_C_OVER_CURRENT:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
- dwc_otg_hcd->flags.b.port_over_current_change = 0;
- break;
- default:
- retval = -EINVAL;
- DWC_ERROR ("DWC OTG HCD - "
- "ClearPortFeature request %xh "
- "unknown or unsupported\n", _wValue);
- }
- break;
- case GetHubDescriptor:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "GetHubDescriptor\n");
- desc = (struct usb_hub_descriptor *)_buf;
- desc->bDescLength = 9;
- desc->bDescriptorType = 0x29;
- desc->bNbrPorts = 1;
- desc->wHubCharacteristics = 0x08;
- desc->bPwrOn2PwrGood = 1;
- desc->bHubContrCurrent = 0;
- desc->u.hs.DeviceRemovable[0] = 0;
- desc->u.hs.DeviceRemovable[1] = 0xff;
- break;
- case GetHubStatus:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "GetHubStatus\n");
- memset (_buf, 0, 4);
- break;
- case GetPortStatus:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "GetPortStatus\n");
-
- if (!_wIndex || _wIndex > 1)
- goto error;
-
- port_status = 0;
-
- if (dwc_otg_hcd->flags.b.port_connect_status_change)
- port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
-
- if (dwc_otg_hcd->flags.b.port_enable_change)
- port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
-
- if (dwc_otg_hcd->flags.b.port_suspend_change)
- port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
-
- if (dwc_otg_hcd->flags.b.port_reset_change)
- port_status |= (1 << USB_PORT_FEAT_C_RESET);
-
- if (dwc_otg_hcd->flags.b.port_over_current_change) {
- DWC_ERROR("Device Not Supported\n");
- port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
- }
-
- if (!dwc_otg_hcd->flags.b.port_connect_status) {
- printk("DISCONNECTED PORT\n");
- /*
- * The port is disconnected, which means the core is
- * either in device mode or it soon will be. Just
- * return 0's for the remainder of the port status
- * since the port register can't be read if the core
- * is in device mode.
- */
-#if 1 // winder.
- *((u32 *) _buf) = cpu_to_le32(port_status);
-#else
- *((__le32 *) _buf) = cpu_to_le32(port_status);
-#endif
- break;
- }
-
- hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
- DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
-
- if (hprt0.b.prtconnsts)
- port_status |= (1 << USB_PORT_FEAT_CONNECTION);
-
- if (hprt0.b.prtena)
- port_status |= (1 << USB_PORT_FEAT_ENABLE);
-
- if (hprt0.b.prtsusp)
- port_status |= (1 << USB_PORT_FEAT_SUSPEND);
-
- if (hprt0.b.prtovrcurract)
- port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
-
- if (hprt0.b.prtrst)
- port_status |= (1 << USB_PORT_FEAT_RESET);
-
- if (hprt0.b.prtpwr)
- port_status |= (1 << USB_PORT_FEAT_POWER);
-
- if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
- port_status |= USB_PORT_STAT_HIGH_SPEED;
-
- else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
- port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
-
- if (hprt0.b.prttstctl)
- port_status |= (1 << USB_PORT_FEAT_TEST);
-
- /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
-#if 1 // winder.
- *((u32 *) _buf) = cpu_to_le32(port_status);
-#else
- *((__le32 *) _buf) = cpu_to_le32(port_status);
-#endif
-
- break;
- case SetHubFeature:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetHubFeature\n");
- /* No HUB features supported */
- break;
- case SetPortFeature:
- if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1))
- goto error;
-
- if (!dwc_otg_hcd->flags.b.port_connect_status) {
- /*
- * The port is disconnected, which means the core is
- * either in device mode or it soon will be. Just
- * return without doing anything since the port
- * register can't be written if the core is in device
- * mode.
- */
- break;
- }
-
- switch (_wValue) {
- case USB_PORT_FEAT_SUSPEND:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
- if (_hcd->self.otg_port == _wIndex
- && _hcd->self.b_hnp_enable) {
- gotgctl_data_t gotgctl = {.d32=0};
- gotgctl.b.hstsethnpen = 1;
- dwc_modify_reg32(&core_if->core_global_regs->
- gotgctl, 0, gotgctl.d32);
- core_if->op_state = A_SUSPEND;
- }
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- hprt0.b.prtsusp = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- //DWC_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32);
- /* Suspend the Phy Clock */
- {
- pcgcctl_data_t pcgcctl = {.d32=0};
- pcgcctl.b.stoppclk = 1;
- dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
- }
-
- /* For HNP the bus must be suspended for at least 200ms.*/
- if (_hcd->self.b_hnp_enable) {
- mdelay(200);
- //DWC_PRINT( "SUSPEND: wait complete! (%d)\n", _hcd->state);
- }
- break;
- case USB_PORT_FEAT_POWER:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_POWER\n");
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- hprt0.b.prtpwr = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_RESET:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_RESET\n");
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- /* TODO: Is this for OTG protocol??
- * We shoudl remove OTG totally for Danube system.
- * But, in the future, maybe we need this.
- */
-#if 1 // winder
- hprt0.b.prtrst = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-#else
- /* When B-Host the Port reset bit is set in
- * the Start HCD Callback function, so that
- * the reset is started within 1ms of the HNP
- * success interrupt. */
- if (!_hcd->self.is_b_host) {
- hprt0.b.prtrst = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- }
-#endif
- /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
- MDELAY (60);
- hprt0.b.prtrst = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- break;
-
-#ifdef DWC_HS_ELECT_TST
- case USB_PORT_FEAT_TEST:
- {
- uint32_t t;
- gintmsk_data_t gintmsk;
-
- t = (_wIndex >> 8); /* MSB wIndex USB */
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
- printk("USB_PORT_FEAT_TEST %d\n", t);
- if (t < 6) {
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- hprt0.b.prttstctl = t;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- } else {
- /* Setup global vars with reg addresses (quick and
- * dirty hack, should be cleaned up)
- */
- global_regs = core_if->core_global_regs;
- hc_global_regs = core_if->host_if->host_global_regs;
- hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
- data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-
- if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
- /* Save current interrupt mask */
- gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-
- /* Disable all interrupts while we muck with
- * the hardware directly
- */
- dwc_write_reg32(&global_regs->gintmsk, 0);
-
- /* 15 second delay per the test spec */
- mdelay(15000);
-
- /* Drive suspend on the root port */
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- hprt0.b.prtsusp = 1;
- hprt0.b.prtres = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-
- /* 15 second delay per the test spec */
- mdelay(15000);
-
- /* Drive resume on the root port */
- hprt0.d32 = dwc_otg_read_hprt0 (core_if);
- hprt0.b.prtsusp = 0;
- hprt0.b.prtres = 1;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
- mdelay(100);
-
- /* Clear the resume bit */
- hprt0.b.prtres = 0;
- dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-
- /* Restore interrupts */
- dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
- } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
- /* Save current interrupt mask */
- gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-
- /* Disable all interrupts while we muck with
- * the hardware directly
- */
- dwc_write_reg32(&global_regs->gintmsk, 0);
-
- /* 15 second delay per the test spec */
- mdelay(15000);
-
- /* Send the Setup packet */
- do_setup();
-
- /* 15 second delay so nothing else happens for awhile */
- mdelay(15000);
-
- /* Restore interrupts */
- dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
- } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
- /* Save current interrupt mask */
- gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-
- /* Disable all interrupts while we muck with
- * the hardware directly
- */
- dwc_write_reg32(&global_regs->gintmsk, 0);
-
- /* Send the Setup packet */
- do_setup();
-
- /* 15 second delay so nothing else happens for awhile */
- mdelay(15000);
-
- /* Send the In and Ack packets */
- do_in_ack();
-
- /* 15 second delay so nothing else happens for awhile */
- mdelay(15000);
-
- /* Restore interrupts */
- dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
- }
- }
- break;
- }
-#endif /* DWC_HS_ELECT_TST */
-
- case USB_PORT_FEAT_INDICATOR:
- DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
- /* Not supported */
- break;
- default:
- retval = -EINVAL;
- DWC_ERROR ("DWC OTG HCD - "
- "SetPortFeature request %xh "
- "unknown or unsupported\n", _wValue);
- break;
- }
- break;
- default:
-error:
- retval = -EINVAL;
- DWC_WARN ("DWC OTG HCD - "
- "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
- _typeReq, _wIndex, _wValue);
- break;
- }
-
- return retval;
-}
-
-
-/**
- * Assigns transactions from a QTD to a free host channel and initializes the
- * host channel to perform the transactions. The host channel is removed from
- * the free list.
- *
- * @param _hcd The HCD state structure.
- * @param _qh Transactions from the first QTD for this QH are selected and
- * assigned to a free host channel.
- */
-static void assign_and_init_hc(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-{
- dwc_hc_t *hc;
- dwc_otg_qtd_t *qtd;
- struct urb *urb;
-
- DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _hcd, _qh);
-
- hc = list_entry(_hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
-
- /* Remove the host channel from the free list. */
- list_del_init(&hc->hc_list_entry);
-
- qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
- urb = qtd->urb;
- _qh->channel = hc;
- _qh->qtd_in_process = qtd;
-
- /*
- * Use usb_pipedevice to determine device address. This address is
- * 0 before the SET_ADDRESS command and the correct address afterward.
- */
- hc->dev_addr = usb_pipedevice(urb->pipe);
- hc->ep_num = usb_pipeendpoint(urb->pipe);
-
- if (urb->dev->speed == USB_SPEED_LOW) {
- hc->speed = DWC_OTG_EP_SPEED_LOW;
- } else if (urb->dev->speed == USB_SPEED_FULL) {
- hc->speed = DWC_OTG_EP_SPEED_FULL;
- } else {
- hc->speed = DWC_OTG_EP_SPEED_HIGH;
- }
- hc->max_packet = dwc_max_packet(_qh->maxp);
-
- hc->xfer_started = 0;
- hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
- hc->error_state = (qtd->error_count > 0);
- hc->halt_on_queue = 0;
- hc->halt_pending = 0;
- hc->requests = 0;
-
- /*
- * The following values may be modified in the transfer type section
- * below. The xfer_len value may be reduced when the transfer is
- * started to accommodate the max widths of the XferSize and PktCnt
- * fields in the HCTSIZn register.
- */
- hc->do_ping = _qh->ping_state;
- hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
- hc->data_pid_start = _qh->data_toggle;
- hc->multi_count = 1;
-
- if (_hcd->core_if->dma_enable) {
- hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma + urb->actual_length;
- } else {
- hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
- }
- hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
- hc->xfer_count = 0;
-
- /*
- * Set the split attributes
- */
- hc->do_split = 0;
- if (_qh->do_split) {
- hc->do_split = 1;
- hc->xact_pos = qtd->isoc_split_pos;
- hc->complete_split = qtd->complete_split;
- hc->hub_addr = urb->dev->tt->hub->devnum;
- hc->port_addr = urb->dev->ttport;
- }
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL:
- hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
- switch (qtd->control_phase) {
- case DWC_OTG_CONTROL_SETUP:
- DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n");
- hc->do_ping = 0;
- hc->ep_is_in = 0;
- hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
- if (_hcd->core_if->dma_enable) {
- hc->xfer_buff = (uint8_t *)(u32)urb->setup_dma;
- } else {
- hc->xfer_buff = (uint8_t *)urb->setup_packet;
- }
- hc->xfer_len = 8;
- break;
- case DWC_OTG_CONTROL_DATA:
- DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n");
- hc->data_pid_start = qtd->data_toggle;
- break;
- case DWC_OTG_CONTROL_STATUS:
- /*
- * Direction is opposite of data direction or IN if no
- * data.
- */
- DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n");
- if (urb->transfer_buffer_length == 0) {
- hc->ep_is_in = 1;
- } else {
- hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
- }
- if (hc->ep_is_in) {
- hc->do_ping = 0;
- }
- hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
- hc->xfer_len = 0;
- if (_hcd->core_if->dma_enable) {
- hc->xfer_buff = (uint8_t *)_hcd->status_buf_dma;
- } else {
- hc->xfer_buff = (uint8_t *)_hcd->status_buf;
- }
- break;
- }
- break;
- case PIPE_BULK:
- hc->ep_type = DWC_OTG_EP_TYPE_BULK;
- break;
- case PIPE_INTERRUPT:
- hc->ep_type = DWC_OTG_EP_TYPE_INTR;
- break;
- case PIPE_ISOCHRONOUS:
- {
- struct usb_iso_packet_descriptor *frame_desc;
- frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
- hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
- if (_hcd->core_if->dma_enable) {
- hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma;
- } else {
- hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
- }
- hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
- hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
-
- if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
- if (hc->xfer_len <= 188) {
- hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
- }
- else {
- hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
- }
- }
- }
- break;
- }
-
- if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- /*
- * This value may be modified when the transfer is started to
- * reflect the actual transfer length.
- */
- hc->multi_count = dwc_hb_mult(_qh->maxp);
- }
-
- dwc_otg_hc_init(_hcd->core_if, hc);
- hc->qh = _qh;
-}
-#define DEBUG_HOST_CHANNELS
-#ifdef DEBUG_HOST_CHANNELS
-static int last_sel_trans_num_per_scheduled = 0;
-module_param(last_sel_trans_num_per_scheduled, int, 0444);
-
-static int last_sel_trans_num_nonper_scheduled = 0;
-module_param(last_sel_trans_num_nonper_scheduled, int, 0444);
-
-static int last_sel_trans_num_avail_hc_at_start = 0;
-module_param(last_sel_trans_num_avail_hc_at_start, int, 0444);
-
-static int last_sel_trans_num_avail_hc_at_end = 0;
-module_param(last_sel_trans_num_avail_hc_at_end, int, 0444);
-#endif /* DEBUG_HOST_CHANNELS */
-
-/**
- * This function selects transactions from the HCD transfer schedule and
- * assigns them to available host channels. It is called from HCD interrupt
- * handler functions.
- *
- * @param _hcd The HCD state structure.
- *
- * @return The types of new transactions that were assigned to host channels.
- */
-dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd)
-{
- struct list_head *qh_ptr;
- dwc_otg_qh_t *qh;
- int num_channels;
- unsigned long flags;
- dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
-
-#ifdef DEBUG_SOF
- DWC_DEBUGPL(DBG_HCD, " Select Transactions\n");
-#endif /* */
-
-#ifdef DEBUG_HOST_CHANNELS
- last_sel_trans_num_per_scheduled = 0;
- last_sel_trans_num_nonper_scheduled = 0;
- last_sel_trans_num_avail_hc_at_start = _hcd->available_host_channels;
-#endif /* DEBUG_HOST_CHANNELS */
-
- /* Process entries in the periodic ready list. */
- num_channels = _hcd->core_if->core_params->host_channels;
- qh_ptr = _hcd->periodic_sched_ready.next;
- while (qh_ptr != &_hcd->periodic_sched_ready
- && !list_empty(&_hcd->free_hc_list)) {
-
- // Make sure we leave one channel for non periodic transactions.
- local_irq_save(flags);
- if (_hcd->available_host_channels <= 1) {
- local_irq_restore(flags);
- break;
- }
- _hcd->available_host_channels--;
- local_irq_restore(flags);
-#ifdef DEBUG_HOST_CHANNELS
- last_sel_trans_num_per_scheduled++;
-#endif /* DEBUG_HOST_CHANNELS */
-
- qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
- assign_and_init_hc(_hcd, qh);
-
- /*
- * Move the QH from the periodic ready schedule to the
- * periodic assigned schedule.
- */
- qh_ptr = qh_ptr->next;
- local_irq_save(flags);
- list_move(&qh->qh_list_entry, &_hcd->periodic_sched_assigned);
- local_irq_restore(flags);
- ret_val = DWC_OTG_TRANSACTION_PERIODIC;
- }
-
- /*
- * Process entries in the deferred portion of the non-periodic list.
- * A NAK put them here and, at the right time, they need to be
- * placed on the sched_inactive list.
- */
- qh_ptr = _hcd->non_periodic_sched_deferred.next;
- while (qh_ptr != &_hcd->non_periodic_sched_deferred) {
- uint16_t frame_number =
- dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
- qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
- qh_ptr = qh_ptr->next;
-
- if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
- // NAK did this
- /*
- * Move the QH from the non periodic deferred schedule to
- * the non periodic inactive schedule.
- */
- local_irq_save(flags);
- list_move(&qh->qh_list_entry,
- &_hcd->non_periodic_sched_inactive);
- local_irq_restore(flags);
- }
- }
-
- /*
- * Process entries in the inactive portion of the non-periodic
- * schedule. Some free host channels may not be used if they are
- * reserved for periodic transfers.
- */
- qh_ptr = _hcd->non_periodic_sched_inactive.next;
- num_channels = _hcd->core_if->core_params->host_channels;
- while (qh_ptr != &_hcd->non_periodic_sched_inactive
- && !list_empty(&_hcd->free_hc_list)) {
-
- local_irq_save(flags);
- if (_hcd->available_host_channels < 1) {
- local_irq_restore(flags);
- break;
- }
- _hcd->available_host_channels--;
- local_irq_restore(flags);
-#ifdef DEBUG_HOST_CHANNELS
- last_sel_trans_num_nonper_scheduled++;
-#endif /* DEBUG_HOST_CHANNELS */
-
- qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
- assign_and_init_hc(_hcd, qh);
-
- /*
- * Move the QH from the non-periodic inactive schedule to the
- * non-periodic active schedule.
- */
- qh_ptr = qh_ptr->next;
- local_irq_save(flags);
- list_move(&qh->qh_list_entry, &_hcd->non_periodic_sched_active);
- local_irq_restore(flags);
-
- if (ret_val == DWC_OTG_TRANSACTION_NONE) {
- ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
- } else {
- ret_val = DWC_OTG_TRANSACTION_ALL;
- }
-
- }
-#ifdef DEBUG_HOST_CHANNELS
- last_sel_trans_num_avail_hc_at_end = _hcd->available_host_channels;
-#endif /* DEBUG_HOST_CHANNELS */
-
- return ret_val;
-}
-
-/**
- * Attempts to queue a single transaction request for a host channel
- * associated with either a periodic or non-periodic transfer. This function
- * assumes that there is space available in the appropriate request queue. For
- * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
- * is available in the appropriate Tx FIFO.
- *
- * @param _hcd The HCD state structure.
- * @param _hc Host channel descriptor associated with either a periodic or
- * non-periodic transfer.
- * @param _fifo_dwords_avail Number of DWORDs available in the periodic Tx
- * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
- * transfers.
- *
- * @return 1 if a request is queued and more requests may be needed to
- * complete the transfer, 0 if no more requests are required for this
- * transfer, -1 if there is insufficient space in the Tx FIFO.
- */
-static int queue_transaction(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- uint16_t _fifo_dwords_avail)
-{
- int retval;
-
- if (_hcd->core_if->dma_enable) {
- if (!_hc->xfer_started) {
- dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
- _hc->qh->ping_state = 0;
- }
- retval = 0;
- } else if (_hc->halt_pending) {
- /* Don't queue a request if the channel has been halted. */
- retval = 0;
- } else if (_hc->halt_on_queue) {
- dwc_otg_hc_halt(_hcd->core_if, _hc, _hc->halt_status);
- retval = 0;
- } else if (_hc->do_ping) {
- if (!_hc->xfer_started) {
- dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
- }
- retval = 0;
- } else if (!_hc->ep_is_in ||
- _hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
- if ((_fifo_dwords_avail * 4) >= _hc->max_packet) {
- if (!_hc->xfer_started) {
- dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
- retval = 1;
- } else {
- retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc);
- }
- } else {
- retval = -1;
- }
- } else {
- if (!_hc->xfer_started) {
- dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
- retval = 1;
- } else {
- retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc);
- }
- }
-
- return retval;
-}
-
-/**
- * Processes active non-periodic channels and queues transactions for these
- * channels to the DWC_otg controller. After queueing transactions, the NP Tx
- * FIFO Empty interrupt is enabled if there are more transactions to queue as
- * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
- * FIFO Empty interrupt is disabled.
- */
-static void process_non_periodic_channels(dwc_otg_hcd_t *_hcd)
-{
- gnptxsts_data_t tx_status;
- struct list_head *orig_qh_ptr;
- dwc_otg_qh_t *qh;
- int status;
- int no_queue_space = 0;
- int no_fifo_space = 0;
- int more_to_do = 0;
-
- dwc_otg_core_global_regs_t *global_regs = _hcd->core_if->core_global_regs;
-
- DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
-#ifdef DEBUG
- tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
- DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n",
- tx_status.b.nptxqspcavail);
- DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n",
- tx_status.b.nptxfspcavail);
-#endif
- /*
- * Keep track of the starting point. Skip over the start-of-list
- * entry.
- */
- if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) {
- _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
- }
- orig_qh_ptr = _hcd->non_periodic_qh_ptr;
-
- /*
- * Process once through the active list or until no more space is
- * available in the request queue or the Tx FIFO.
- */
- do {
- tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
- if (!_hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
- no_queue_space = 1;
- break;
- }
-
- qh = list_entry(_hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
- status = queue_transaction(_hcd, qh->channel, tx_status.b.nptxfspcavail);
-
- if (status > 0) {
- more_to_do = 1;
- } else if (status < 0) {
- no_fifo_space = 1;
- break;
- }
-
- /* Advance to next QH, skipping start-of-list entry. */
- _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
- if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) {
- _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
- }
-
- } while (_hcd->non_periodic_qh_ptr != orig_qh_ptr);
-
- if (!_hcd->core_if->dma_enable) {
- gintmsk_data_t intr_mask = {.d32 = 0};
- intr_mask.b.nptxfempty = 1;
-
-#ifdef DEBUG
- tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
- DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n",
- tx_status.b.nptxqspcavail);
- DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n",
- tx_status.b.nptxfspcavail);
-#endif
- if (more_to_do || no_queue_space || no_fifo_space) {
- /*
- * May need to queue more transactions as the request
- * queue or Tx FIFO empties. Enable the non-periodic
- * Tx FIFO empty interrupt. (Always use the half-empty
- * level to ensure that new requests are loaded as
- * soon as possible.)
- */
- dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
- } else {
- /*
- * Disable the Tx FIFO empty interrupt since there are
- * no more transactions that need to be queued right
- * now. This function is called from interrupt
- * handlers to queue more transactions as transfer
- * states change.
- */
- dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
- }
- }
-}
-
-/**
- * Processes periodic channels for the next frame and queues transactions for
- * these channels to the DWC_otg controller. After queueing transactions, the
- * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
- * to queue as Periodic Tx FIFO or request queue space becomes available.
- * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
- */
-static void process_periodic_channels(dwc_otg_hcd_t *_hcd)
-{
- hptxsts_data_t tx_status;
- struct list_head *qh_ptr;
- dwc_otg_qh_t *qh;
- int status;
- int no_queue_space = 0;
- int no_fifo_space = 0;
-
- dwc_otg_host_global_regs_t *host_regs;
- host_regs = _hcd->core_if->host_if->host_global_regs;
-
- DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
-#ifdef DEBUG
- tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
- DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n",
- tx_status.b.ptxqspcavail);
- DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n",
- tx_status.b.ptxfspcavail);
-#endif
-
- qh_ptr = _hcd->periodic_sched_assigned.next;
- while (qh_ptr != &_hcd->periodic_sched_assigned) {
- tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
- if (tx_status.b.ptxqspcavail == 0) {
- no_queue_space = 1;
- break;
- }
-
- qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-
- /*
- * Set a flag if we're queuing high-bandwidth in slave mode.
- * The flag prevents any halts to get into the request queue in
- * the middle of multiple high-bandwidth packets getting queued.
- */
- if ((!_hcd->core_if->dma_enable) &&
- (qh->channel->multi_count > 1))
- {
- _hcd->core_if->queuing_high_bandwidth = 1;
- }
-
- status = queue_transaction(_hcd, qh->channel, tx_status.b.ptxfspcavail);
- if (status < 0) {
- no_fifo_space = 1;
- break;
- }
-
- /*
- * In Slave mode, stay on the current transfer until there is
- * nothing more to do or the high-bandwidth request count is
- * reached. In DMA mode, only need to queue one request. The
- * controller automatically handles multiple packets for
- * high-bandwidth transfers.
- */
- if (_hcd->core_if->dma_enable ||
- (status == 0 ||
- qh->channel->requests == qh->channel->multi_count)) {
- qh_ptr = qh_ptr->next;
- /*
- * Move the QH from the periodic assigned schedule to
- * the periodic queued schedule.
- */
- list_move(&qh->qh_list_entry, &_hcd->periodic_sched_queued);
-
- /* done queuing high bandwidth */
- _hcd->core_if->queuing_high_bandwidth = 0;
- }
- }
-
- if (!_hcd->core_if->dma_enable) {
- dwc_otg_core_global_regs_t *global_regs;
- gintmsk_data_t intr_mask = {.d32 = 0};
-
- global_regs = _hcd->core_if->core_global_regs;
- intr_mask.b.ptxfempty = 1;
-#ifdef DEBUG
- tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
- DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n",
- tx_status.b.ptxqspcavail);
- DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n",
- tx_status.b.ptxfspcavail);
-#endif
- if (!(list_empty(&_hcd->periodic_sched_assigned)) ||
- no_queue_space || no_fifo_space) {
- /*
- * May need to queue more transactions as the request
- * queue or Tx FIFO empties. Enable the periodic Tx
- * FIFO empty interrupt. (Always use the half-empty
- * level to ensure that new requests are loaded as
- * soon as possible.)
- */
- dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
- } else {
- /*
- * Disable the Tx FIFO empty interrupt since there are
- * no more transactions that need to be queued right
- * now. This function is called from interrupt
- * handlers to queue more transactions as transfer
- * states change.
- */
- dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
- }
- }
-}
-
-/**
- * This function processes the currently active host channels and queues
- * transactions for these channels to the DWC_otg controller. It is called
- * from HCD interrupt handler functions.
- *
- * @param _hcd The HCD state structure.
- * @param _tr_type The type(s) of transactions to queue (non-periodic,
- * periodic, or both).
- */
-void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd,
- dwc_otg_transaction_type_e _tr_type)
-{
-#ifdef DEBUG_SOF
- DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
-#endif
- /* Process host channels associated with periodic transfers. */
- if ((_tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
- _tr_type == DWC_OTG_TRANSACTION_ALL) &&
- !list_empty(&_hcd->periodic_sched_assigned)) {
-
- process_periodic_channels(_hcd);
- }
-
- /* Process host channels associated with non-periodic transfers. */
- if ((_tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
- _tr_type == DWC_OTG_TRANSACTION_ALL)) {
- if (!list_empty(&_hcd->non_periodic_sched_active)) {
- process_non_periodic_channels(_hcd);
- } else {
- /*
- * Ensure NP Tx FIFO empty interrupt is disabled when
- * there are no non-periodic transfers to process.
- */
- gintmsk_data_t gintmsk = {.d32 = 0};
- gintmsk.b.nptxfempty = 1;
- dwc_modify_reg32(&_hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
- }
- }
-}
-
-/**
- * Sets the final status of an URB and returns it to the device driver. Any
- * required cleanup of the URB is performed.
- */
-void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t * _hcd, struct urb *_urb,
- int _status)
- __releases(_hcd->lock)
-__acquires(_hcd->lock)
-{
-#ifdef DEBUG
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
- DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
- __func__, _urb, usb_pipedevice(_urb->pipe),
- usb_pipeendpoint(_urb->pipe),
- usb_pipein(_urb->pipe) ? "IN" : "OUT", _status);
- if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) {
- int i;
- for (i = 0; i < _urb->number_of_packets; i++) {
- DWC_PRINT(" ISO Desc %d status: %d\n",
- i, _urb->iso_frame_desc[i].status);
- }
- }
- }
-#endif
-
- _urb->status = _status;
- _urb->hcpriv = NULL;
- usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), _urb);
- spin_unlock(&_hcd->lock);
- usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, _status);
- spin_lock(&_hcd->lock);
-}
-
-/*
- * Returns the Queue Head for an URB.
- */
-dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb)
-{
- struct usb_host_endpoint *ep = dwc_urb_to_endpoint(_urb);
- return (dwc_otg_qh_t *)ep->hcpriv;
-}
-
-#ifdef DEBUG
-void dwc_print_setup_data (uint8_t *setup)
-{
- int i;
- if (CHK_DEBUG_LEVEL(DBG_HCD)){
- DWC_PRINT("Setup Data = MSB ");
- for (i=7; i>=0; i--) DWC_PRINT ("%02x ", setup[i]);
- DWC_PRINT("\n");
- DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0]&0x80) ? "Device-to-Host" : "Host-to-Device");
- DWC_PRINT(" bmRequestType Type = ");
- switch ((setup[0]&0x60) >> 5) {
- case 0: DWC_PRINT("Standard\n"); break;
- case 1: DWC_PRINT("Class\n"); break;
- case 2: DWC_PRINT("Vendor\n"); break;
- case 3: DWC_PRINT("Reserved\n"); break;
- }
- DWC_PRINT(" bmRequestType Recipient = ");
- switch (setup[0]&0x1f) {
- case 0: DWC_PRINT("Device\n"); break;
- case 1: DWC_PRINT("Interface\n"); break;
- case 2: DWC_PRINT("Endpoint\n"); break;
- case 3: DWC_PRINT("Other\n"); break;
- default: DWC_PRINT("Reserved\n"); break;
- }
- DWC_PRINT(" bRequest = 0x%0x\n", setup[1]);
- DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
- DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
- DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
- }
-}
-#endif
-
-void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd) {
-#ifdef DEBUG
-#if 0
- DWC_PRINT("Frame remaining at SOF:\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- _hcd->frrem_samples, _hcd->frrem_accum,
- (_hcd->frrem_samples > 0) ?
- _hcd->frrem_accum/_hcd->frrem_samples : 0);
-
- DWC_PRINT("\n");
- DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n");
- DWC_PRINT(" samples %u, accum %u, avg %u\n",
- _hcd->core_if->hfnum_7_samples, _hcd->core_if->hfnum_7_frrem_accum,
- (_hcd->core_if->hfnum_7_samples > 0) ?
- _hcd->core_if->hfnum_7_frrem_accum/_hcd->core_if->hfnum_7_samples : 0);
- DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n");
- DWC_PRINT(" samples %u, accum %u, avg %u\n",
- _hcd->core_if->hfnum_0_samples, _hcd->core_if->hfnum_0_frrem_accum,
- (_hcd->core_if->hfnum_0_samples > 0) ?
- _hcd->core_if->hfnum_0_frrem_accum/_hcd->core_if->hfnum_0_samples : 0);
- DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n");
- DWC_PRINT(" samples %u, accum %u, avg %u\n",
- _hcd->core_if->hfnum_other_samples, _hcd->core_if->hfnum_other_frrem_accum,
- (_hcd->core_if->hfnum_other_samples > 0) ?
- _hcd->core_if->hfnum_other_frrem_accum/_hcd->core_if->hfnum_other_samples : 0);
-
- DWC_PRINT("\n");
- DWC_PRINT("Frame remaining at sample point A (uframe 7):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- _hcd->hfnum_7_samples_a, _hcd->hfnum_7_frrem_accum_a,
- (_hcd->hfnum_7_samples_a > 0) ?
- _hcd->hfnum_7_frrem_accum_a/_hcd->hfnum_7_samples_a : 0);
- DWC_PRINT("Frame remaining at sample point A (uframe 0):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- _hcd->hfnum_0_samples_a, _hcd->hfnum_0_frrem_accum_a,
- (_hcd->hfnum_0_samples_a > 0) ?
- _hcd->hfnum_0_frrem_accum_a/_hcd->hfnum_0_samples_a : 0);
- DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- _hcd->hfnum_other_samples_a, _hcd->hfnum_other_frrem_accum_a,
- (_hcd->hfnum_other_samples_a > 0) ?
- _hcd->hfnum_other_frrem_accum_a/_hcd->hfnum_other_samples_a : 0);
-
- DWC_PRINT("\n");
- DWC_PRINT("Frame remaining at sample point B (uframe 7):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- _hcd->hfnum_7_samples_b, _hcd->hfnum_7_frrem_accum_b,
- (_hcd->hfnum_7_samples_b > 0) ?
- _hcd->hfnum_7_frrem_accum_b/_hcd->hfnum_7_samples_b : 0);
- DWC_PRINT("Frame remaining at sample point B (uframe 0):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- _hcd->hfnum_0_samples_b, _hcd->hfnum_0_frrem_accum_b,
- (_hcd->hfnum_0_samples_b > 0) ?
- _hcd->hfnum_0_frrem_accum_b/_hcd->hfnum_0_samples_b : 0);
- DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n");
- DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
- _hcd->hfnum_other_samples_b, _hcd->hfnum_other_frrem_accum_b,
- (_hcd->hfnum_other_samples_b > 0) ?
- _hcd->hfnum_other_frrem_accum_b/_hcd->hfnum_other_samples_b : 0);
-#endif
-#endif
-}
-
-void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd)
-{
-#ifdef DEBUG
- int num_channels;
- int i;
- gnptxsts_data_t np_tx_status;
- hptxsts_data_t p_tx_status;
-
- num_channels = _hcd->core_if->core_params->host_channels;
- DWC_PRINT("\n");
- DWC_PRINT("************************************************************\n");
- DWC_PRINT("HCD State:\n");
- DWC_PRINT(" Num channels: %d\n", num_channels);
- for (i = 0; i < num_channels; i++) {
- dwc_hc_t *hc = _hcd->hc_ptr_array[i];
- DWC_PRINT(" Channel %d:\n", i);
- DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
- hc->dev_addr, hc->ep_num, hc->ep_is_in);
- DWC_PRINT(" speed: %d\n", hc->speed);
- DWC_PRINT(" ep_type: %d\n", hc->ep_type);
- DWC_PRINT(" max_packet: %d\n", hc->max_packet);
- DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
- DWC_PRINT(" multi_count: %d\n", hc->multi_count);
- DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
- DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
- DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
- DWC_PRINT(" xfer_count: %d\n", hc->xfer_count);
- DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue);
- DWC_PRINT(" halt_pending: %d\n", hc->halt_pending);
- DWC_PRINT(" halt_status: %d\n", hc->halt_status);
- DWC_PRINT(" do_split: %d\n", hc->do_split);
- DWC_PRINT(" complete_split: %d\n", hc->complete_split);
- DWC_PRINT(" hub_addr: %d\n", hc->hub_addr);
- DWC_PRINT(" port_addr: %d\n", hc->port_addr);
- DWC_PRINT(" xact_pos: %d\n", hc->xact_pos);
- DWC_PRINT(" requests: %d\n", hc->requests);
- DWC_PRINT(" qh: %p\n", hc->qh);
- if (hc->xfer_started) {
- hfnum_data_t hfnum;
- hcchar_data_t hcchar;
- hctsiz_data_t hctsiz;
- hcint_data_t hcint;
- hcintmsk_data_t hcintmsk;
- hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum);
- hcchar.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcchar);
- hctsiz.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hctsiz);
- hcint.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcint);
- hcintmsk.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcintmsk);
- DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32);
- DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32);
- DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32);
- DWC_PRINT(" hcint: 0x%08x\n", hcint.d32);
- DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32);
- }
- if (hc->xfer_started && (hc->qh != NULL) && (hc->qh->qtd_in_process != NULL)) {
- dwc_otg_qtd_t *qtd;
- struct urb *urb;
- qtd = hc->qh->qtd_in_process;
- urb = qtd->urb;
- DWC_PRINT(" URB Info:\n");
- DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb);
- if (urb != NULL) {
- DWC_PRINT(" Dev: %d, EP: %d %s\n",
- usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "IN" : "OUT");
- DWC_PRINT(" Max packet size: %d\n",
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
- DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer);
- DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma);
- DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length);
- DWC_PRINT(" actual_length: %d\n", urb->actual_length);
- }
- }
- }
- //DWC_PRINT(" non_periodic_channels: %d\n", _hcd->non_periodic_channels);
- //DWC_PRINT(" periodic_channels: %d\n", _hcd->periodic_channels);
- DWC_PRINT(" available_channels: %d\n", _hcd->available_host_channels);
- DWC_PRINT(" periodic_usecs: %d\n", _hcd->periodic_usecs);
- np_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->core_global_regs->gnptxsts);
- DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
- DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
- p_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hptxsts);
- DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
- DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
- dwc_otg_hcd_dump_frrem(_hcd);
- dwc_otg_dump_global_registers(_hcd->core_if);
- dwc_otg_dump_host_registers(_hcd->core_if);
- DWC_PRINT("************************************************************\n");
- DWC_PRINT("\n");
-#endif
-}
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.h b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.h
deleted file mode 100644
index 8a20dffa0a..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd.h
+++ /dev/null
@@ -1,676 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.h $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 537387 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-#if !defined(__DWC_HCD_H__)
-#define __DWC_HCD_H__
-
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-
-struct lm_device;
-struct dwc_otg_device;
-
-#include "dwc_otg_cil.h"
-//#include "dwc_otg_ifx.h" // winder
-
-
-/**
- * @file
- *
- * This file contains the structures, constants, and interfaces for
- * the Host Contoller Driver (HCD).
- *
- * The Host Controller Driver (HCD) is responsible for translating requests
- * from the USB Driver into the appropriate actions on the DWC_otg controller.
- * It isolates the USBD from the specifics of the controller by providing an
- * API to the USBD.
- */
-
-/**
- * Phases for control transfers.
- */
-typedef enum dwc_otg_control_phase {
- DWC_OTG_CONTROL_SETUP,
- DWC_OTG_CONTROL_DATA,
- DWC_OTG_CONTROL_STATUS
-} dwc_otg_control_phase_e;
-
-/** Transaction types. */
-typedef enum dwc_otg_transaction_type {
- DWC_OTG_TRANSACTION_NONE,
- DWC_OTG_TRANSACTION_PERIODIC,
- DWC_OTG_TRANSACTION_NON_PERIODIC,
- DWC_OTG_TRANSACTION_ALL
-} dwc_otg_transaction_type_e;
-
-/**
- * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
- * interrupt, or isochronous transfer. A single QTD is created for each URB
- * (of one of these types) submitted to the HCD. The transfer associated with
- * a QTD may require one or multiple transactions.
- *
- * A QTD is linked to a Queue Head, which is entered in either the
- * non-periodic or periodic schedule for execution. When a QTD is chosen for
- * execution, some or all of its transactions may be executed. After
- * execution, the state of the QTD is updated. The QTD may be retired if all
- * its transactions are complete or if an error occurred. Otherwise, it
- * remains in the schedule so more transactions can be executed later.
- */
-struct dwc_otg_qh;
-typedef struct dwc_otg_qtd {
- /**
- * Determines the PID of the next data packet for the data phase of
- * control transfers. Ignored for other transfer types.<br>
- * One of the following values:
- * - DWC_OTG_HC_PID_DATA0
- * - DWC_OTG_HC_PID_DATA1
- */
- uint8_t data_toggle;
-
- /** Current phase for control transfers (Setup, Data, or Status). */
- dwc_otg_control_phase_e control_phase;
-
- /** Keep track of the current split type
- * for FS/LS endpoints on a HS Hub */
- uint8_t complete_split;
-
- /** How many bytes transferred during SSPLIT OUT */
- uint32_t ssplit_out_xfer_count;
-
- /**
- * Holds the number of bus errors that have occurred for a transaction
- * within this transfer.
- */
- uint8_t error_count;
-
- /**
- * Index of the next frame descriptor for an isochronous transfer. A
- * frame descriptor describes the buffer position and length of the
- * data to be transferred in the next scheduled (micro)frame of an
- * isochronous transfer. It also holds status for that transaction.
- * The frame index starts at 0.
- */
- int isoc_frame_index;
-
- /** Position of the ISOC split on full/low speed */
- uint8_t isoc_split_pos;
-
- /** Position of the ISOC split in the buffer for the current frame */
- uint16_t isoc_split_offset;
-
- /** URB for this transfer */
- struct urb *urb;
-
- /** This list of QTDs */
- struct list_head qtd_list_entry;
-
- /* Field to track the qh pointer */
- struct dwc_otg_qh *qtd_qh_ptr;
-} dwc_otg_qtd_t;
-
-/**
- * A Queue Head (QH) holds the static characteristics of an endpoint and
- * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
- * be entered in either the non-periodic or periodic schedule.
- */
-typedef struct dwc_otg_qh {
- /**
- * Endpoint type.
- * One of the following values:
- * - USB_ENDPOINT_XFER_CONTROL
- * - USB_ENDPOINT_XFER_ISOC
- * - USB_ENDPOINT_XFER_BULK
- * - USB_ENDPOINT_XFER_INT
- */
- uint8_t ep_type;
- uint8_t ep_is_in;
-
- /** wMaxPacketSize Field of Endpoint Descriptor. */
- uint16_t maxp;
-
- /**
- * Determines the PID of the next data packet for non-control
- * transfers. Ignored for control transfers.<br>
- * One of the following values:
- * - DWC_OTG_HC_PID_DATA0
- * - DWC_OTG_HC_PID_DATA1
- */
- uint8_t data_toggle;
-
- /** Ping state if 1. */
- uint8_t ping_state;
-
- /**
- * List of QTDs for this QH.
- */
- struct list_head qtd_list;
-
- /** Host channel currently processing transfers for this QH. */
- dwc_hc_t *channel;
-
- /** QTD currently assigned to a host channel for this QH. */
- dwc_otg_qtd_t *qtd_in_process;
-
- /** Full/low speed endpoint on high-speed hub requires split. */
- uint8_t do_split;
-
- /** @name Periodic schedule information */
- /** @{ */
-
- /** Bandwidth in microseconds per (micro)frame. */
- uint8_t usecs;
-
- /** Interval between transfers in (micro)frames. */
- uint16_t interval;
-
- /**
- * (micro)frame to initialize a periodic transfer. The transfer
- * executes in the following (micro)frame.
- */
- uint16_t sched_frame;
-
- /** (micro)frame at which last start split was initialized. */
- uint16_t start_split_frame;
-
- /** @} */
-
- uint16_t speed;
- uint16_t frame_usecs[8];
- /** Entry for QH in either the periodic or non-periodic schedule. */
- struct list_head qh_list_entry;
-} dwc_otg_qh_t;
-
-/**
- * This structure holds the state of the HCD, including the non-periodic and
- * periodic schedules.
- */
-typedef struct dwc_otg_hcd {
- spinlock_t lock;
-
- /** DWC OTG Core Interface Layer */
- dwc_otg_core_if_t *core_if;
-
- /** Internal DWC HCD Flags */
- volatile union dwc_otg_hcd_internal_flags {
- uint32_t d32;
- struct {
- unsigned port_connect_status_change : 1;
- unsigned port_connect_status : 1;
- unsigned port_reset_change : 1;
- unsigned port_enable_change : 1;
- unsigned port_suspend_change : 1;
- unsigned port_over_current_change : 1;
- unsigned reserved : 27;
- } b;
- } flags;
-
- /**
- * Inactive items in the non-periodic schedule. This is a list of
- * Queue Heads. Transfers associated with these Queue Heads are not
- * currently assigned to a host channel.
- */
- struct list_head non_periodic_sched_inactive;
-
- /**
- * Deferred items in the non-periodic schedule. This is a list of
- * Queue Heads. Transfers associated with these Queue Heads are not
- * currently assigned to a host channel.
- * When we get an NAK, the QH goes here.
- */
- struct list_head non_periodic_sched_deferred;
-
- /**
- * Active items in the non-periodic schedule. This is a list of
- * Queue Heads. Transfers associated with these Queue Heads are
- * currently assigned to a host channel.
- */
- struct list_head non_periodic_sched_active;
-
- /**
- * Pointer to the next Queue Head to process in the active
- * non-periodic schedule.
- */
- struct list_head *non_periodic_qh_ptr;
-
- /**
- * Inactive items in the periodic schedule. This is a list of QHs for
- * periodic transfers that are _not_ scheduled for the next frame.
- * Each QH in the list has an interval counter that determines when it
- * needs to be scheduled for execution. This scheduling mechanism
- * allows only a simple calculation for periodic bandwidth used (i.e.
- * must assume that all periodic transfers may need to execute in the
- * same frame). However, it greatly simplifies scheduling and should
- * be sufficient for the vast majority of OTG hosts, which need to
- * connect to a small number of peripherals at one time.
- *
- * Items move from this list to periodic_sched_ready when the QH
- * interval counter is 0 at SOF.
- */
- struct list_head periodic_sched_inactive;
-
- /**
- * List of periodic QHs that are ready for execution in the next
- * frame, but have not yet been assigned to host channels.
- *
- * Items move from this list to periodic_sched_assigned as host
- * channels become available during the current frame.
- */
- struct list_head periodic_sched_ready;
-
- /**
- * List of periodic QHs to be executed in the next frame that are
- * assigned to host channels.
- *
- * Items move from this list to periodic_sched_queued as the
- * transactions for the QH are queued to the DWC_otg controller.
- */
- struct list_head periodic_sched_assigned;
-
- /**
- * List of periodic QHs that have been queued for execution.
- *
- * Items move from this list to either periodic_sched_inactive or
- * periodic_sched_ready when the channel associated with the transfer
- * is released. If the interval for the QH is 1, the item moves to
- * periodic_sched_ready because it must be rescheduled for the next
- * frame. Otherwise, the item moves to periodic_sched_inactive.
- */
- struct list_head periodic_sched_queued;
-
- /**
- * Total bandwidth claimed so far for periodic transfers. This value
- * is in microseconds per (micro)frame. The assumption is that all
- * periodic transfers may occur in the same (micro)frame.
- */
- uint16_t periodic_usecs;
-
- /**
- * Total bandwidth claimed so far for all periodic transfers
- * in a frame.
- * This will include a mixture of HS and FS transfers.
- * Units are microseconds per (micro)frame.
- * We have a budget per frame and have to schedule
- * transactions accordingly.
- * Watch out for the fact that things are actually scheduled for the
- * "next frame".
- */
- uint16_t frame_usecs[8];
-
- /**
- * Frame number read from the core at SOF. The value ranges from 0 to
- * DWC_HFNUM_MAX_FRNUM.
- */
- uint16_t frame_number;
-
- /**
- * Free host channels in the controller. This is a list of
- * dwc_hc_t items.
- */
- struct list_head free_hc_list;
-
- /**
- * Number of available host channels.
- */
- int available_host_channels;
-
- /**
- * Array of pointers to the host channel descriptors. Allows accessing
- * a host channel descriptor given the host channel number. This is
- * useful in interrupt handlers.
- */
- dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS];
-
- /**
- * Buffer to use for any data received during the status phase of a
- * control transfer. Normally no data is transferred during the status
- * phase. This buffer is used as a bit bucket.
- */
- uint8_t *status_buf;
-
- /**
- * DMA address for status_buf.
- */
- dma_addr_t status_buf_dma;
-#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
-
- /**
- * Structure to allow starting the HCD in a non-interrupt context
- * during an OTG role change.
- */
- struct work_struct start_work;
- struct usb_hcd *_p;
-
- /**
- * Connection timer. An OTG host must display a message if the device
- * does not connect. Started when the VBus power is turned on via
- * sysfs attribute "buspower".
- */
- struct timer_list conn_timer;
-
- /* Tasket to do a reset */
- struct tasklet_struct *reset_tasklet;
-
-#ifdef DEBUG
- uint32_t frrem_samples;
- uint64_t frrem_accum;
-
- uint32_t hfnum_7_samples_a;
- uint64_t hfnum_7_frrem_accum_a;
- uint32_t hfnum_0_samples_a;
- uint64_t hfnum_0_frrem_accum_a;
- uint32_t hfnum_other_samples_a;
- uint64_t hfnum_other_frrem_accum_a;
-
- uint32_t hfnum_7_samples_b;
- uint64_t hfnum_7_frrem_accum_b;
- uint32_t hfnum_0_samples_b;
- uint64_t hfnum_0_frrem_accum_b;
- uint32_t hfnum_other_samples_b;
- uint64_t hfnum_other_frrem_accum_b;
-#endif
-
-} dwc_otg_hcd_t;
-
-/** Gets the dwc_otg_hcd from a struct usb_hcd */
-static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
-{
- return (dwc_otg_hcd_t *)(hcd->hcd_priv);
-}
-
-/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
-static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
-{
- return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
-}
-
-/** @name HCD Create/Destroy Functions */
-/** @{ */
-extern int __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device);
-extern void dwc_otg_hcd_remove(struct device *_dev);
-/** @} */
-
-/** @name Linux HC Driver API Functions */
-/** @{ */
-
-extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
-extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
-extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
-extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
-
-extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
- struct urb *urb,
- gfp_t mem_flags);
-extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
- struct urb *urb,
- int status);
-extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
-
-extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
- struct usb_host_endpoint *ep);
-
-extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd,
- char *buf);
-extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
- u16 typeReq,
- u16 wValue,
- u16 wIndex,
- char *buf,
- u16 wLength);
-
-/** @} */
-
-/** @name Transaction Execution Functions */
-/** @{ */
-extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd);
-extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd,
- dwc_otg_transaction_type_e _tr_type);
-extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *_urb,
- int _status);
-/** @} */
-
-/** @name Interrupt Handler Functions */
-/** @{ */
-extern int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_disconnect_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num);
-extern int32_t dwc_otg_hcd_handle_session_req_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-/** @} */
-
-
-/** @name Schedule Queue Functions */
-/** @{ */
-
-/* Implemented in dwc_otg_hcd_queue.c */
-extern dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb);
-extern void dwc_otg_hcd_qh_init (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb);
-extern void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh);
-extern int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh);
-extern void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh);
-extern void dwc_otg_hcd_qh_deactivate (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_csplit);
-extern int dwc_otg_hcd_qh_deferr (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int delay);
-
-/** Remove and free a QH */
-static inline void dwc_otg_hcd_qh_remove_and_free (dwc_otg_hcd_t *_hcd,
- dwc_otg_qh_t *_qh)
-{
- dwc_otg_hcd_qh_remove (_hcd, _qh);
- dwc_otg_hcd_qh_free (_qh);
-}
-
-/** Allocates memory for a QH structure.
- * @return Returns the memory allocate or NULL on error. */
-static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc (void)
-{
-#ifdef _SC_BUILD_
- return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_ATOMIC);
-#else
- return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_KERNEL);
-#endif
-}
-
-extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb);
-extern void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb);
-extern int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
-
-/** Allocates memory for a QTD structure.
- * @return Returns the memory allocate or NULL on error. */
-static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc (void)
-{
-#ifdef _SC_BUILD_
- return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_ATOMIC);
-#else
- return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_KERNEL);
-#endif
-}
-
-/** Frees the memory for a QTD structure. QTD should already be removed from
- * list.
- * @param[in] _qtd QTD to free.*/
-static inline void dwc_otg_hcd_qtd_free (dwc_otg_qtd_t *_qtd)
-{
- kfree (_qtd);
-}
-
-/** Removes a QTD from list.
- * @param[in] _qtd QTD to remove from list. */
-static inline void dwc_otg_hcd_qtd_remove (dwc_otg_qtd_t *_qtd)
-{
- unsigned long flags;
- local_irq_save (flags);
- list_del (&_qtd->qtd_list_entry);
- local_irq_restore (flags);
-}
-
-/** Remove and free a QTD */
-static inline void dwc_otg_hcd_qtd_remove_and_free (dwc_otg_qtd_t *_qtd)
-{
- dwc_otg_hcd_qtd_remove (_qtd);
- dwc_otg_hcd_qtd_free (_qtd);
-}
-
-/** @} */
-
-
-/** @name Internal Functions */
-/** @{ */
-dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb);
-void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd);
-void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd);
-/** @} */
-
-
-/** Gets the usb_host_endpoint associated with an URB. */
-static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *_urb)
-{
- struct usb_device *dev = _urb->dev;
- int ep_num = usb_pipeendpoint(_urb->pipe);
- if (usb_pipein(_urb->pipe))
- return dev->ep_in[ep_num];
- else
- return dev->ep_out[ep_num];
-}
-
-/**
- * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
- * qualified with its direction (possible 32 endpoints per device).
- */
-#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) \
- ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
- ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
-
-/** Gets the QH that contains the list_head */
-#define dwc_list_to_qh(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qh_t,qh_list_entry))
-
-/** Gets the QTD that contains the list_head */
-#define dwc_list_to_qtd(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qtd_t,qtd_list_entry))
-
-/** Check if QH is non-periodic */
-#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
- (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
-
-/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
-#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-
-/** Packet size for any kind of endpoint descriptor */
-#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-
-/**
- * Returns true if _frame1 is less than or equal to _frame2. The comparison is
- * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
- * frame number when the max frame number is reached.
- */
-static inline int dwc_frame_num_le(uint16_t _frame1, uint16_t _frame2)
-{
- return ((_frame2 - _frame1) & DWC_HFNUM_MAX_FRNUM) <=
- (DWC_HFNUM_MAX_FRNUM >> 1);
-}
-
-/**
- * Returns true if _frame1 is greater than _frame2. The comparison is done
- * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
- * number when the max frame number is reached.
- */
-static inline int dwc_frame_num_gt(uint16_t _frame1, uint16_t _frame2)
-{
- return (_frame1 != _frame2) &&
- (((_frame1 - _frame2) & DWC_HFNUM_MAX_FRNUM) <
- (DWC_HFNUM_MAX_FRNUM >> 1));
-}
-
-/**
- * Increments _frame by the amount specified by _inc. The addition is done
- * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
- */
-static inline uint16_t dwc_frame_num_inc(uint16_t _frame, uint16_t _inc)
-{
- return (_frame + _inc) & DWC_HFNUM_MAX_FRNUM;
-}
-
-static inline uint16_t dwc_full_frame_num (uint16_t _frame)
-{
- return ((_frame) & DWC_HFNUM_MAX_FRNUM) >> 3;
-}
-
-static inline uint16_t dwc_micro_frame_num (uint16_t _frame)
-{
- return (_frame) & 0x7;
-}
-
-#ifdef DEBUG
-/**
- * Macro to sample the remaining PHY clocks left in the current frame. This
- * may be used during debugging to determine the average time it takes to
- * execute sections of code. There are two possible sample points, "a" and
- * "b", so the _letter argument must be one of these values.
- *
- * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
- * example, "cat /sys/devices/lm0/hcd_frrem".
- */
-#define dwc_sample_frrem(_hcd, _qh, _letter) \
-{ \
- hfnum_data_t hfnum; \
- dwc_otg_qtd_t *qtd; \
- qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
- if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
- hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
- switch (hfnum.b.frnum & 0x7) { \
- case 7: \
- _hcd->hfnum_7_samples_##_letter++; \
- _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
- break; \
- case 0: \
- _hcd->hfnum_0_samples_##_letter++; \
- _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
- break; \
- default: \
- _hcd->hfnum_other_samples_##_letter++; \
- _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
- break; \
- } \
- } \
-}
-#else // DEBUG
-#define dwc_sample_frrem(_hcd, _qh, _letter)
-#endif // DEBUG
-#endif // __DWC_HCD_H__
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
deleted file mode 100644
index f6f3f3dc8d..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+++ /dev/null
@@ -1,1839 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_intr.c $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 553126 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-
-#include "dwc_otg_driver.h"
-#include "dwc_otg_hcd.h"
-#include "dwc_otg_regs.h"
-
-const int erratum_usb09_patched = 0;
-const int deferral_on = 1;
-const int nak_deferral_delay = 8;
-const int nyet_deferral_delay = 1;
-/** @file
- * This file contains the implementation of the HCD Interrupt handlers.
- */
-
-/** This function handles interrupts for the HCD. */
-int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-{
- int retval = 0;
-
- dwc_otg_core_if_t *core_if = _dwc_otg_hcd->core_if;
- gintsts_data_t gintsts;
-#ifdef DEBUG
- dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-#endif
-
- /* Check if HOST Mode */
- if (dwc_otg_is_host_mode(core_if)) {
- gintsts.d32 = dwc_otg_read_core_intr(core_if);
- if (!gintsts.d32) {
- return 0;
- }
-
-#ifdef DEBUG
- /* Don't print debug message in the interrupt handler on SOF */
-# ifndef DEBUG_SOF
- if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
- DWC_DEBUGPL (DBG_HCD, "\n");
-#endif
-
-#ifdef DEBUG
-# ifndef DEBUG_SOF
- if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
-#endif
-
- if (gintsts.b.sofintr) {
- retval |= dwc_otg_hcd_handle_sof_intr (_dwc_otg_hcd);
- }
- if (gintsts.b.rxstsqlvl) {
- retval |= dwc_otg_hcd_handle_rx_status_q_level_intr (_dwc_otg_hcd);
- }
- if (gintsts.b.nptxfempty) {
- retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr (_dwc_otg_hcd);
- }
- if (gintsts.b.i2cintr) {
- /** @todo Implement i2cintr handler. */
- }
- if (gintsts.b.portintr) {
- retval |= dwc_otg_hcd_handle_port_intr (_dwc_otg_hcd);
- }
- if (gintsts.b.hcintr) {
- retval |= dwc_otg_hcd_handle_hc_intr (_dwc_otg_hcd);
- }
- if (gintsts.b.ptxfempty) {
- retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (_dwc_otg_hcd);
- }
-#ifdef DEBUG
-# ifndef DEBUG_SOF
- if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
- {
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
- dwc_read_reg32(&global_regs->gintsts));
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
- dwc_read_reg32(&global_regs->gintmsk));
- }
-#endif
-
-#ifdef DEBUG
-# ifndef DEBUG_SOF
- if (gintsts.d32 != DWC_SOF_INTR_MASK)
-# endif
- DWC_DEBUGPL (DBG_HCD, "\n");
-#endif
-
- }
-
- return retval;
-}
-
-#ifdef DWC_TRACK_MISSED_SOFS
-#warning Compiling code to track missed SOFs
-#define FRAME_NUM_ARRAY_SIZE 1000
-/**
- * This function is for debug only.
- */
-static inline void track_missed_sofs(uint16_t _curr_frame_number) {
- static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
- static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
- static int frame_num_idx = 0;
- static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
- static int dumped_frame_num_array = 0;
-
- if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
- if ((((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != _curr_frame_number)) {
- frame_num_array[frame_num_idx] = _curr_frame_number;
- last_frame_num_array[frame_num_idx++] = last_frame_num;
- }
- } else if (!dumped_frame_num_array) {
- int i;
- printk(KERN_EMERG USB_DWC "Frame Last Frame\n");
- printk(KERN_EMERG USB_DWC "----- ----------\n");
- for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
- printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n",
- frame_num_array[i], last_frame_num_array[i]);
- }
- dumped_frame_num_array = 1;
- }
- last_frame_num = _curr_frame_number;
-}
-#endif
-
-/**
- * Handles the start-of-frame interrupt in host mode. Non-periodic
- * transactions may be queued to the DWC_otg controller for the current
- * (micro)frame. Periodic transactions may be queued to the controller for the
- * next (micro)frame.
- */
-int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_hcd)
-{
- hfnum_data_t hfnum;
- struct list_head *qh_entry;
- dwc_otg_qh_t *qh;
- dwc_otg_transaction_type_e tr_type;
- gintsts_data_t gintsts = {.d32 = 0};
-
- hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum);
-
-#ifdef DEBUG_SOF
- DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
-#endif
-
- _hcd->frame_number = hfnum.b.frnum;
-
-#ifdef DEBUG
- _hcd->frrem_accum += hfnum.b.frrem;
- _hcd->frrem_samples++;
-#endif
-
-#ifdef DWC_TRACK_MISSED_SOFS
- track_missed_sofs(_hcd->frame_number);
-#endif
-
- /* Determine whether any periodic QHs should be executed. */
- qh_entry = _hcd->periodic_sched_inactive.next;
- while (qh_entry != &_hcd->periodic_sched_inactive) {
- qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
- qh_entry = qh_entry->next;
- if (dwc_frame_num_le(qh->sched_frame, _hcd->frame_number)) {
- /*
- * Move QH to the ready list to be executed next
- * (micro)frame.
- */
- list_move(&qh->qh_list_entry, &_hcd->periodic_sched_ready);
- }
- }
-
- tr_type = dwc_otg_hcd_select_transactions(_hcd);
- if (tr_type != DWC_OTG_TRANSACTION_NONE) {
- dwc_otg_hcd_queue_transactions(_hcd, tr_type);
- }
-
- /* Clear interrupt */
- gintsts.b.sofintr = 1;
- dwc_write_reg32(&_hcd->core_if->core_global_regs->gintsts, gintsts.d32);
-
- return 1;
-}
-
-/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
- * least one packet in the Rx FIFO. The packets are moved from the FIFO to
- * memory if the DWC_otg controller is operating in Slave mode. */
-int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-{
- host_grxsts_data_t grxsts;
- dwc_hc_t *hc = NULL;
-
- DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
-
- grxsts.d32 = dwc_read_reg32(&_dwc_otg_hcd->core_if->core_global_regs->grxstsp);
-
- hc = _dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
-
- /* Packet Status */
- DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum);
- DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt);
- DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
- DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts);
-
- switch (grxsts.b.pktsts) {
- case DWC_GRXSTS_PKTSTS_IN:
- /* Read the data into the host buffer. */
- if (grxsts.b.bcnt > 0) {
- dwc_otg_read_packet(_dwc_otg_hcd->core_if,
- hc->xfer_buff,
- grxsts.b.bcnt);
-
- /* Update the HC fields for the next packet received. */
- hc->xfer_count += grxsts.b.bcnt;
- hc->xfer_buff += grxsts.b.bcnt;
- }
-
- case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
- case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
- case DWC_GRXSTS_PKTSTS_CH_HALTED:
- /* Handled in interrupt, just ignore data */
- break;
- default:
- DWC_ERROR ("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
- break;
- }
-
- return 1;
-}
-
-/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
- * data packets may be written to the FIFO for OUT transfers. More requests
- * may be written to the non-periodic request queue for IN transfers. This
- * interrupt is enabled only in Slave mode. */
-int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
- dwc_otg_hcd_queue_transactions(_dwc_otg_hcd,
- DWC_OTG_TRANSACTION_NON_PERIODIC);
- return 1;
-}
-
-/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
- * packets may be written to the FIFO for OUT transfers. More requests may be
- * written to the periodic request queue for IN transfers. This interrupt is
- * enabled only in Slave mode. */
-int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-{
- DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
- dwc_otg_hcd_queue_transactions(_dwc_otg_hcd,
- DWC_OTG_TRANSACTION_PERIODIC);
- return 1;
-}
-
-/** There are multiple conditions that can cause a port interrupt. This function
- * determines which interrupt conditions have occurred and handles them
- * appropriately. */
-int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-{
- int retval = 0;
- hprt0_data_t hprt0;
- hprt0_data_t hprt0_modify;
-
- hprt0.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0);
- hprt0_modify.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0);
-
- /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
- * GINTSTS */
-
- hprt0_modify.b.prtena = 0;
- hprt0_modify.b.prtconndet = 0;
- hprt0_modify.b.prtenchng = 0;
- hprt0_modify.b.prtovrcurrchng = 0;
-
- /* Port Connect Detected
- * Set flag and clear if detected */
- if (hprt0.b.prtconndet) {
- DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
- "Port Connect Detected--\n", hprt0.d32);
- _dwc_otg_hcd->flags.b.port_connect_status_change = 1;
- _dwc_otg_hcd->flags.b.port_connect_status = 1;
- hprt0_modify.b.prtconndet = 1;
-
- /* B-Device has connected, Delete the connection timer. */
- del_timer( &_dwc_otg_hcd->conn_timer );
-
- /* The Hub driver asserts a reset when it sees port connect
- * status change flag */
- retval |= 1;
- }
-
- /* Port Enable Changed
- * Clear if detected - Set internal flag if disabled */
- if (hprt0.b.prtenchng) {
- DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
- "Port Enable Changed--\n", hprt0.d32);
- hprt0_modify.b.prtenchng = 1;
- if (hprt0.b.prtena == 1) {
- int do_reset = 0;
- dwc_otg_core_params_t *params = _dwc_otg_hcd->core_if->core_params;
- dwc_otg_core_global_regs_t *global_regs = _dwc_otg_hcd->core_if->core_global_regs;
- dwc_otg_host_if_t *host_if = _dwc_otg_hcd->core_if->host_if;
-
- /* Check if we need to adjust the PHY clock speed for
- * low power and adjust it */
- if (params->host_support_fs_ls_low_power)
- {
- gusbcfg_data_t usbcfg;
-
- usbcfg.d32 = dwc_read_reg32 (&global_regs->gusbcfg);
-
- if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) ||
- (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED))
- {
- /*
- * Low power
- */
- hcfg_data_t hcfg;
- if (usbcfg.b.phylpwrclksel == 0) {
- /* Set PHY low power clock select for FS/LS devices */
- usbcfg.b.phylpwrclksel = 1;
- dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
- do_reset = 1;
- }
-
- hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
-
- if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) &&
- (params->host_ls_low_power_phy_clk ==
- DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ))
- {
- /* 6 MHZ */
- DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
- if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
- hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
- dwc_write_reg32(&host_if->host_global_regs->hcfg,
- hcfg.d32);
- do_reset = 1;
- }
- }
- else {
- /* 48 MHZ */
- DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
- if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
- hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
- dwc_write_reg32(&host_if->host_global_regs->hcfg,
- hcfg.d32);
- do_reset = 1;
- }
- }
- }
- else {
- /*
- * Not low power
- */
- if (usbcfg.b.phylpwrclksel == 1) {
- usbcfg.b.phylpwrclksel = 0;
- dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
- do_reset = 1;
- }
- }
-
- if (do_reset) {
- tasklet_schedule(_dwc_otg_hcd->reset_tasklet);
- }
- }
-
- if (!do_reset) {
- /* Port has been enabled set the reset change flag */
- _dwc_otg_hcd->flags.b.port_reset_change = 1;
- }
-
- } else {
- _dwc_otg_hcd->flags.b.port_enable_change = 1;
- }
- retval |= 1;
- }
-
- /** Overcurrent Change Interrupt */
- if (hprt0.b.prtovrcurrchng) {
- DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
- "Port Overcurrent Changed--\n", hprt0.d32);
- _dwc_otg_hcd->flags.b.port_over_current_change = 1;
- hprt0_modify.b.prtovrcurrchng = 1;
- retval |= 1;
- }
-
- /* Clear Port Interrupts */
- dwc_write_reg32(_dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
-
- return retval;
-}
-
-
-/** This interrupt indicates that one or more host channels has a pending
- * interrupt. There are multiple conditions that can cause each host channel
- * interrupt. This function determines which conditions have occurred for each
- * host channel interrupt and handles them appropriately. */
-int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-{
- int i;
- int retval = 0;
- haint_data_t haint;
-
- /* Clear appropriate bits in HCINTn to clear the interrupt bit in
- * GINTSTS */
-
- haint.d32 = dwc_otg_read_host_all_channels_intr(_dwc_otg_hcd->core_if);
-
- for (i=0; i<_dwc_otg_hcd->core_if->core_params->host_channels; i++) {
- if (haint.b2.chint & (1 << i)) {
- retval |= dwc_otg_hcd_handle_hc_n_intr (_dwc_otg_hcd, i);
- }
- }
-
- return retval;
-}
-
-/* Macro used to clear one channel interrupt */
-#define clear_hc_int(_hc_regs_,_intr_) \
-do { \
- hcint_data_t hcint_clear = {.d32 = 0}; \
- hcint_clear.b._intr_ = 1; \
- dwc_write_reg32(&((_hc_regs_)->hcint), hcint_clear.d32); \
-} while (0)
-
-/*
- * Macro used to disable one channel interrupt. Channel interrupts are
- * disabled when the channel is halted or released by the interrupt handler.
- * There is no need to handle further interrupts of that type until the
- * channel is re-assigned. In fact, subsequent handling may cause crashes
- * because the channel structures are cleaned up when the channel is released.
- */
-#define disable_hc_int(_hc_regs_,_intr_) \
-do { \
- hcintmsk_data_t hcintmsk = {.d32 = 0}; \
- hcintmsk.b._intr_ = 1; \
- dwc_modify_reg32(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \
-} while (0)
-
-/**
- * Gets the actual length of a transfer after the transfer halts. _halt_status
- * holds the reason for the halt.
- *
- * For IN transfers where _halt_status is DWC_OTG_HC_XFER_COMPLETE,
- * *_short_read is set to 1 upon return if less than the requested
- * number of bytes were transferred. Otherwise, *_short_read is set to 0 upon
- * return. _short_read may also be NULL on entry, in which case it remains
- * unchanged.
- */
-static uint32_t get_actual_xfer_length(dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- dwc_otg_qtd_t *_qtd,
- dwc_otg_halt_status_e _halt_status,
- int *_short_read)
-{
- hctsiz_data_t hctsiz;
- uint32_t length;
-
- if (_short_read != NULL) {
- *_short_read = 0;
- }
- hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
-
- if (_halt_status == DWC_OTG_HC_XFER_COMPLETE) {
- if (_hc->ep_is_in) {
- length = _hc->xfer_len - hctsiz.b.xfersize;
- if (_short_read != NULL) {
- *_short_read = (hctsiz.b.xfersize != 0);
- }
- } else if (_hc->qh->do_split) {
- length = _qtd->ssplit_out_xfer_count;
- } else {
- length = _hc->xfer_len;
- }
- } else {
- /*
- * Must use the hctsiz.pktcnt field to determine how much data
- * has been transferred. This field reflects the number of
- * packets that have been transferred via the USB. This is
- * always an integral number of packets if the transfer was
- * halted before its normal completion. (Can't use the
- * hctsiz.xfersize field because that reflects the number of
- * bytes transferred via the AHB, not the USB).
- */
- length = (_hc->start_pkt_count - hctsiz.b.pktcnt) * _hc->max_packet;
- }
-
- return length;
-}
-
-/**
- * Updates the state of the URB after a Transfer Complete interrupt on the
- * host channel. Updates the actual_length field of the URB based on the
- * number of bytes transferred via the host channel. Sets the URB status
- * if the data transfer is finished.
- *
- * @return 1 if the data transfer specified by the URB is completely finished,
- * 0 otherwise.
- */
-static int update_urb_state_xfer_comp(dwc_hc_t *_hc,
- dwc_otg_hc_regs_t * _hc_regs, struct urb *_urb,
- dwc_otg_qtd_t * _qtd, int *status)
-{
- int xfer_done = 0;
- int short_read = 0;
-
- _urb->actual_length += get_actual_xfer_length(_hc, _hc_regs, _qtd,
- DWC_OTG_HC_XFER_COMPLETE,
- &short_read);
-
- if (short_read || (_urb->actual_length == _urb->transfer_buffer_length)) {
- xfer_done = 1;
- if (short_read && (_urb->transfer_flags & URB_SHORT_NOT_OK)) {
- *status = -EREMOTEIO;
- } else {
- *status = 0;
- }
- }
-
-#ifdef DEBUG
- {
- hctsiz_data_t hctsiz;
- hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
- DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
- __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num);
- DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", _hc->xfer_len);
- DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize);
- DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
- _urb->transfer_buffer_length);
- DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", _urb->actual_length);
- DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n",
- short_read, xfer_done);
- }
-#endif
-
- return xfer_done;
-}
-
-/*
- * Save the starting data toggle for the next transfer. The data toggle is
- * saved in the QH for non-control transfers and it's saved in the QTD for
- * control transfers.
- */
-static void save_data_toggle(dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- dwc_otg_qtd_t *_qtd)
-{
- hctsiz_data_t hctsiz;
- hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
-
- if (_hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
- dwc_otg_qh_t *qh = _hc->qh;
- if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
- qh->data_toggle = DWC_OTG_HC_PID_DATA0;
- } else {
- qh->data_toggle = DWC_OTG_HC_PID_DATA1;
- }
- } else {
- if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
- _qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
- } else {
- _qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
- }
- }
-}
-
-/**
- * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
- * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
- * still linked to the QH, the QH is added to the end of the inactive
- * non-periodic schedule. For periodic QHs, removes the QH from the periodic
- * schedule if no more QTDs are linked to the QH.
- */
-static void deactivate_qh(dwc_otg_hcd_t *_hcd,
- dwc_otg_qh_t *_qh,
- int free_qtd)
-{
- int continue_split = 0;
- dwc_otg_qtd_t *qtd;
-
- DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, _hcd, _qh, free_qtd);
-
- qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-
- if (qtd->complete_split) {
- continue_split = 1;
- }
- else if ((qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID) ||
- (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END))
- {
- continue_split = 1;
- }
-
- if (free_qtd) {
- /*
- * Note that this was previously a call to
- * dwc_otg_hcd_qtd_remove_and_free(qtd), which frees the qtd.
- * However, that call frees the qtd memory, and we continue in the
- * interrupt logic to access it many more times, including writing
- * to it. With slub debugging on, it is clear that we were writing
- * to memory we had freed.
- * Call this instead, and now I have moved the freeing of the memory to
- * the end of processing this interrupt.
- */
- //dwc_otg_hcd_qtd_remove_and_free(qtd);
- dwc_otg_hcd_qtd_remove(qtd);
-
- continue_split = 0;
- }
-
- _qh->channel = NULL;
- _qh->qtd_in_process = NULL;
- dwc_otg_hcd_qh_deactivate(_hcd, _qh, continue_split);
-}
-
-/**
- * Updates the state of an Isochronous URB when the transfer is stopped for
- * any reason. The fields of the current entry in the frame descriptor array
- * are set based on the transfer state and the input _halt_status. Completes
- * the Isochronous URB if all the URB frames have been completed.
- *
- * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
- * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
- */
-static dwc_otg_halt_status_e
-update_isoc_urb_state(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- dwc_otg_qtd_t *_qtd,
- dwc_otg_halt_status_e _halt_status)
-{
- struct urb *urb = _qtd->urb;
- dwc_otg_halt_status_e ret_val = _halt_status;
- struct usb_iso_packet_descriptor *frame_desc;
-
- frame_desc = &urb->iso_frame_desc[_qtd->isoc_frame_index];
- switch (_halt_status) {
- case DWC_OTG_HC_XFER_COMPLETE:
- frame_desc->status = 0;
- frame_desc->actual_length =
- get_actual_xfer_length(_hc, _hc_regs, _qtd,
- _halt_status, NULL);
- break;
- case DWC_OTG_HC_XFER_FRAME_OVERRUN:
- urb->error_count++;
- if (_hc->ep_is_in) {
- frame_desc->status = -ENOSR;
- } else {
- frame_desc->status = -ECOMM;
- }
- frame_desc->actual_length = 0;
- break;
- case DWC_OTG_HC_XFER_BABBLE_ERR:
- urb->error_count++;
- frame_desc->status = -EOVERFLOW;
- /* Don't need to update actual_length in this case. */
- break;
- case DWC_OTG_HC_XFER_XACT_ERR:
- urb->error_count++;
- frame_desc->status = -EPROTO;
- frame_desc->actual_length =
- get_actual_xfer_length(_hc, _hc_regs, _qtd,
- _halt_status, NULL);
- default:
- DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
- _halt_status);
- BUG();
- break;
- }
-
- if (++_qtd->isoc_frame_index == urb->number_of_packets) {
- /*
- * urb->status is not used for isoc transfers.
- * The individual frame_desc statuses are used instead.
- */
- dwc_otg_hcd_complete_urb(_hcd, urb, 0);
- ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
- } else {
- ret_val = DWC_OTG_HC_XFER_COMPLETE;
- }
-
- return ret_val;
-}
-
-/**
- * Releases a host channel for use by other transfers. Attempts to select and
- * queue more transactions since at least one host channel is available.
- *
- * @param _hcd The HCD state structure.
- * @param _hc The host channel to release.
- * @param _qtd The QTD associated with the host channel. This QTD may be freed
- * if the transfer is complete or an error has occurred.
- * @param _halt_status Reason the channel is being released. This status
- * determines the actions taken by this function.
- */
-static void release_channel(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- dwc_otg_qtd_t *_qtd,
- dwc_otg_halt_status_e _halt_status,
- int *must_free)
-{
- dwc_otg_transaction_type_e tr_type;
- int free_qtd;
- dwc_otg_qh_t * _qh;
- int deact = 1;
- int retry_delay = 1;
- unsigned long flags;
-
- DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n", __func__,
- _hc->hc_num, _halt_status);
-
- switch (_halt_status) {
- case DWC_OTG_HC_XFER_NYET:
- case DWC_OTG_HC_XFER_NAK:
- if (_halt_status == DWC_OTG_HC_XFER_NYET) {
- retry_delay = nyet_deferral_delay;
- } else {
- retry_delay = nak_deferral_delay;
- }
- free_qtd = 0;
- if (deferral_on && _hc->do_split) {
- _qh = _hc->qh;
- if (_qh) {
- deact = dwc_otg_hcd_qh_deferr(_hcd, _qh , retry_delay);
- }
- }
- break;
- case DWC_OTG_HC_XFER_URB_COMPLETE:
- free_qtd = 1;
- break;
- case DWC_OTG_HC_XFER_AHB_ERR:
- case DWC_OTG_HC_XFER_STALL:
- case DWC_OTG_HC_XFER_BABBLE_ERR:
- free_qtd = 1;
- break;
- case DWC_OTG_HC_XFER_XACT_ERR:
- if (_qtd->error_count >= 3) {
- DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n");
- free_qtd = 1;
- //_qtd->urb->status = -EPROTO;
- dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPROTO);
- } else {
- free_qtd = 0;
- }
- break;
- case DWC_OTG_HC_XFER_URB_DEQUEUE:
- /*
- * The QTD has already been removed and the QH has been
- * deactivated. Don't want to do anything except release the
- * host channel and try to queue more transfers.
- */
- goto cleanup;
- case DWC_OTG_HC_XFER_NO_HALT_STATUS:
- DWC_ERROR("%s: No halt_status, channel %d\n", __func__, _hc->hc_num);
- free_qtd = 0;
- break;
- default:
- free_qtd = 0;
- break;
- }
- if (free_qtd) {
- /* Only change must_free to true (do not set to zero here -- it is
- * pre-initialized to zero).
- */
- *must_free = 1;
- }
- if (deact) {
- deactivate_qh(_hcd, _hc->qh, free_qtd);
- }
- cleanup:
- /*
- * Release the host channel for use by other transfers. The cleanup
- * function clears the channel interrupt enables and conditions, so
- * there's no need to clear the Channel Halted interrupt separately.
- */
- dwc_otg_hc_cleanup(_hcd->core_if, _hc);
- list_add_tail(&_hc->hc_list_entry, &_hcd->free_hc_list);
-
- local_irq_save(flags);
- _hcd->available_host_channels++;
- local_irq_restore(flags);
- /* Try to queue more transfers now that there's a free channel, */
- /* unless erratum_usb09_patched is set */
- if (!erratum_usb09_patched) {
- tr_type = dwc_otg_hcd_select_transactions(_hcd);
- if (tr_type != DWC_OTG_TRANSACTION_NONE) {
- dwc_otg_hcd_queue_transactions(_hcd, tr_type);
- }
- }
-}
-
-/**
- * Halts a host channel. If the channel cannot be halted immediately because
- * the request queue is full, this function ensures that the FIFO empty
- * interrupt for the appropriate queue is enabled so that the halt request can
- * be queued when there is space in the request queue.
- *
- * This function may also be called in DMA mode. In that case, the channel is
- * simply released since the core always halts the channel automatically in
- * DMA mode.
- */
-static void halt_channel(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- dwc_otg_qtd_t *_qtd,
- dwc_otg_halt_status_e _halt_status, int *must_free)
-{
- if (_hcd->core_if->dma_enable) {
- release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
- return;
- }
-
- /* Slave mode processing... */
- dwc_otg_hc_halt(_hcd->core_if, _hc, _halt_status);
-
- if (_hc->halt_on_queue) {
- gintmsk_data_t gintmsk = {.d32 = 0};
- dwc_otg_core_global_regs_t *global_regs;
- global_regs = _hcd->core_if->core_global_regs;
-
- if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
- _hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
- /*
- * Make sure the Non-periodic Tx FIFO empty interrupt
- * is enabled so that the non-periodic schedule will
- * be processed.
- */
- gintmsk.b.nptxfempty = 1;
- dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
- } else {
- /*
- * Move the QH from the periodic queued schedule to
- * the periodic assigned schedule. This allows the
- * halt to be queued when the periodic schedule is
- * processed.
- */
- list_move(&_hc->qh->qh_list_entry,
- &_hcd->periodic_sched_assigned);
-
- /*
- * Make sure the Periodic Tx FIFO Empty interrupt is
- * enabled so that the periodic schedule will be
- * processed.
- */
- gintmsk.b.ptxfempty = 1;
- dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
- }
- }
-}
-
-/**
- * Performs common cleanup for non-periodic transfers after a Transfer
- * Complete interrupt. This function should be called after any endpoint type
- * specific handling is finished to release the host channel.
- */
-static void complete_non_periodic_xfer(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- dwc_otg_qtd_t *_qtd,
- dwc_otg_halt_status_e _halt_status, int *must_free)
-{
- hcint_data_t hcint;
-
- _qtd->error_count = 0;
-
- hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
- if (hcint.b.nyet) {
- /*
- * Got a NYET on the last transaction of the transfer. This
- * means that the endpoint should be in the PING state at the
- * beginning of the next transfer.
- */
- _hc->qh->ping_state = 1;
- clear_hc_int(_hc_regs,nyet);
- }
-
- /*
- * Always halt and release the host channel to make it available for
- * more transfers. There may still be more phases for a control
- * transfer or more data packets for a bulk transfer at this point,
- * but the host channel is still halted. A channel will be reassigned
- * to the transfer when the non-periodic schedule is processed after
- * the channel is released. This allows transactions to be queued
- * properly via dwc_otg_hcd_queue_transactions, which also enables the
- * Tx FIFO Empty interrupt if necessary.
- */
- if (_hc->ep_is_in) {
- /*
- * IN transfers in Slave mode require an explicit disable to
- * halt the channel. (In DMA mode, this call simply releases
- * the channel.)
- */
- halt_channel(_hcd, _hc, _qtd, _halt_status, must_free);
- } else {
- /*
- * The channel is automatically disabled by the core for OUT
- * transfers in Slave mode.
- */
- release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
- }
-}
-
-/**
- * Performs common cleanup for periodic transfers after a Transfer Complete
- * interrupt. This function should be called after any endpoint type specific
- * handling is finished to release the host channel.
- */
-static void complete_periodic_xfer(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- dwc_otg_qtd_t *_qtd,
- dwc_otg_halt_status_e _halt_status, int *must_free)
-{
- hctsiz_data_t hctsiz;
- _qtd->error_count = 0;
-
- hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
- if (!_hc->ep_is_in || hctsiz.b.pktcnt == 0) {
- /* Core halts channel in these cases. */
- release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
- } else {
- /* Flush any outstanding requests from the Tx queue. */
- halt_channel(_hcd, _hc, _qtd, _halt_status, must_free);
- }
-}
-
-/**
- * Handles a host channel Transfer Complete interrupt. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- dwc_otg_qtd_t *_qtd, int *must_free)
-{
- int urb_xfer_done;
- dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
- struct urb *urb = _qtd->urb;
- int pipe_type = usb_pipetype(urb->pipe);
- int status = -EINPROGRESS;
-
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Transfer Complete--\n", _hc->hc_num);
-
- /*
- * Handle xfer complete on CSPLIT.
- */
- if (_hc->qh->do_split) {
- _qtd->complete_split = 0;
- }
-
- /* Update the QTD and URB states. */
- switch (pipe_type) {
- case PIPE_CONTROL:
- switch (_qtd->control_phase) {
- case DWC_OTG_CONTROL_SETUP:
- if (urb->transfer_buffer_length > 0) {
- _qtd->control_phase = DWC_OTG_CONTROL_DATA;
- } else {
- _qtd->control_phase = DWC_OTG_CONTROL_STATUS;
- }
- DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
- halt_status = DWC_OTG_HC_XFER_COMPLETE;
- break;
- case DWC_OTG_CONTROL_DATA: {
- urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs,urb, _qtd, &status);
- if (urb_xfer_done) {
- _qtd->control_phase = DWC_OTG_CONTROL_STATUS;
- DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n");
- } else {
- save_data_toggle(_hc, _hc_regs, _qtd);
- }
- halt_status = DWC_OTG_HC_XFER_COMPLETE;
- break;
- }
- case DWC_OTG_CONTROL_STATUS:
- DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n");
- if (status == -EINPROGRESS) {
- status = 0;
- }
- dwc_otg_hcd_complete_urb(_hcd, urb, status);
- halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
- break;
- }
-
- complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,
- halt_status, must_free);
- break;
- case PIPE_BULK:
- DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
- urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status);
- if (urb_xfer_done) {
- dwc_otg_hcd_complete_urb(_hcd, urb, status);
- halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
- } else {
- halt_status = DWC_OTG_HC_XFER_COMPLETE;
- }
-
- save_data_toggle(_hc, _hc_regs, _qtd);
- complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,halt_status, must_free);
- break;
- case PIPE_INTERRUPT:
- DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n");
- update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status);
-
- /*
- * Interrupt URB is done on the first transfer complete
- * interrupt.
- */
- dwc_otg_hcd_complete_urb(_hcd, urb, status);
- save_data_toggle(_hc, _hc_regs, _qtd);
- complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,
- DWC_OTG_HC_XFER_URB_COMPLETE, must_free);
- break;
- case PIPE_ISOCHRONOUS:
- DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n");
- if (_qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL)
- {
- halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
- DWC_OTG_HC_XFER_COMPLETE);
- }
- complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, halt_status, must_free);
- break;
- }
-
- disable_hc_int(_hc_regs,xfercompl);
-
- return 1;
-}
-
-/**
- * Handles a host channel STALL interrupt. This handler may be called in
- * either DMA mode or Slave mode.
- */
-static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- dwc_otg_qtd_t *_qtd, int *must_free)
-{
- struct urb *urb = _qtd->urb;
- int pipe_type = usb_pipetype(urb->pipe);
-
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "STALL Received--\n", _hc->hc_num);
-
- if (pipe_type == PIPE_CONTROL) {
- dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE);
- }
-
- if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
- dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE);
- /*
- * USB protocol requires resetting the data toggle for bulk
- * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
- * setup command is issued to the endpoint. Anticipate the
- * CLEAR_FEATURE command since a STALL has occurred and reset
- * the data toggle now.
- */
- _hc->qh->data_toggle = 0;
- }
-
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_STALL, must_free);
- disable_hc_int(_hc_regs,stall);
-
- return 1;
-}
-
-/*
- * Updates the state of the URB when a transfer has been stopped due to an
- * abnormal condition before the transfer completes. Modifies the
- * actual_length field of the URB to reflect the number of bytes that have
- * actually been transferred via the host channel.
- */
-static void update_urb_state_xfer_intr(dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- struct urb *_urb,
- dwc_otg_qtd_t *_qtd,
- dwc_otg_halt_status_e _halt_status)
-{
- uint32_t bytes_transferred = get_actual_xfer_length(_hc, _hc_regs, _qtd,
- _halt_status, NULL);
- _urb->actual_length += bytes_transferred;
-
-#ifdef DEBUG
- {
- hctsiz_data_t hctsiz;
- hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
- DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
- __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num);
- DWC_DEBUGPL(DBG_HCDV, " _hc->start_pkt_count %d\n", _hc->start_pkt_count);
- DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
- DWC_DEBUGPL(DBG_HCDV, " _hc->max_packet %d\n", _hc->max_packet);
- DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", bytes_transferred);
- DWC_DEBUGPL(DBG_HCDV, " _urb->actual_length %d\n", _urb->actual_length);
- DWC_DEBUGPL(DBG_HCDV, " _urb->transfer_buffer_length %d\n",
- _urb->transfer_buffer_length);
- }
-#endif
-}
-
-/**
- * Handles a host channel NAK interrupt. This handler may be called in either
- * DMA mode or Slave mode.
- */
-static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- dwc_otg_qtd_t *_qtd, int *must_free)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "NAK Received--\n", _hc->hc_num);
-
- /*
- * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
- * interrupt. Re-start the SSPLIT transfer.
- */
- if (_hc->do_split) {
- if (_hc->complete_split) {
- _qtd->error_count = 0;
- }
- _qtd->complete_split = 0;
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
- goto handle_nak_done;
- }
-
- switch (usb_pipetype(_qtd->urb->pipe)) {
- case PIPE_CONTROL:
- case PIPE_BULK:
- if (_hcd->core_if->dma_enable && _hc->ep_is_in) {
- /*
- * NAK interrupts are enabled on bulk/control IN
- * transfers in DMA mode for the sole purpose of
- * resetting the error count after a transaction error
- * occurs. The core will continue transferring data.
- */
- _qtd->error_count = 0;
- goto handle_nak_done;
- }
-
- /*
- * NAK interrupts normally occur during OUT transfers in DMA
- * or Slave mode. For IN transfers, more requests will be
- * queued as request queue space is available.
- */
- _qtd->error_count = 0;
-
- if (!_hc->qh->ping_state) {
- update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb,
- _qtd, DWC_OTG_HC_XFER_NAK);
- save_data_toggle(_hc, _hc_regs, _qtd);
- if (_qtd->urb->dev->speed == USB_SPEED_HIGH) {
- _hc->qh->ping_state = 1;
- }
- }
-
- /*
- * Halt the channel so the transfer can be re-started from
- * the appropriate point or the PING protocol will
- * start/continue.
- */
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
- break;
- case PIPE_INTERRUPT:
- _qtd->error_count = 0;
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
- break;
- case PIPE_ISOCHRONOUS:
- /* Should never get called for isochronous transfers. */
- BUG();
- break;
- }
-
- handle_nak_done:
- disable_hc_int(_hc_regs,nak);
-
- return 1;
-}
-
-/**
- * Handles a host channel ACK interrupt. This interrupt is enabled when
- * performing the PING protocol in Slave mode, when errors occur during
- * either Slave mode or DMA mode, and during Start Split transactions.
- */
-static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "ACK Received--\n", _hc->hc_num);
-
- if (_hc->do_split) {
- /*
- * Handle ACK on SSPLIT.
- * ACK should not occur in CSPLIT.
- */
- if ((!_hc->ep_is_in) && (_hc->data_pid_start != DWC_OTG_HC_PID_SETUP)) {
- _qtd->ssplit_out_xfer_count = _hc->xfer_len;
- }
- if (!(_hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !_hc->ep_is_in)) {
- /* Don't need complete for isochronous out transfers. */
- _qtd->complete_split = 1;
- }
-
- /* ISOC OUT */
- if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && !_hc->ep_is_in) {
- switch (_hc->xact_pos) {
- case DWC_HCSPLIT_XACTPOS_ALL:
- break;
- case DWC_HCSPLIT_XACTPOS_END:
- _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
- _qtd->isoc_split_offset = 0;
- break;
- case DWC_HCSPLIT_XACTPOS_BEGIN:
- case DWC_HCSPLIT_XACTPOS_MID:
- /*
- * For BEGIN or MID, calculate the length for
- * the next microframe to determine the correct
- * SSPLIT token, either MID or END.
- */
- do {
- struct usb_iso_packet_descriptor *frame_desc;
-
- frame_desc = &_qtd->urb->iso_frame_desc[_qtd->isoc_frame_index];
- _qtd->isoc_split_offset += 188;
-
- if ((frame_desc->length - _qtd->isoc_split_offset) <= 188) {
- _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
- }
- else {
- _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
- }
-
- } while(0);
- break;
- }
- } else {
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
- }
- } else {
- _qtd->error_count = 0;
-
- if (_hc->qh->ping_state) {
- _hc->qh->ping_state = 0;
- /*
- * Halt the channel so the transfer can be re-started
- * from the appropriate point. This only happens in
- * Slave mode. In DMA mode, the ping_state is cleared
- * when the transfer is started because the core
- * automatically executes the PING, then the transfer.
- */
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
- }
- }
-
- /*
- * If the ACK occurred when _not_ in the PING state, let the channel
- * continue transferring data after clearing the error count.
- */
-
- disable_hc_int(_hc_regs,ack);
-
- return 1;
-}
-
-/**
- * Handles a host channel NYET interrupt. This interrupt should only occur on
- * Bulk and Control OUT endpoints and for complete split transactions. If a
- * NYET occurs at the same time as a Transfer Complete interrupt, it is
- * handled in the xfercomp interrupt handler, not here. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- dwc_otg_qtd_t *_qtd, int *must_free)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "NYET Received--\n", _hc->hc_num);
-
- /*
- * NYET on CSPLIT
- * re-do the CSPLIT immediately on non-periodic
- */
- if ((_hc->do_split) && (_hc->complete_split)) {
- if ((_hc->ep_type == DWC_OTG_EP_TYPE_INTR) ||
- (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) {
- int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
-
- if (dwc_full_frame_num(frnum) !=
- dwc_full_frame_num(_hc->qh->sched_frame)) {
- /*
- * No longer in the same full speed frame.
- * Treat this as a transaction error.
- */
-#if 0
- /** @todo Fix system performance so this can
- * be treated as an error. Right now complete
- * splits cannot be scheduled precisely enough
- * due to other system activity, so this error
- * occurs regularly in Slave mode.
- */
- _qtd->error_count++;
-#endif
- _qtd->complete_split = 0;
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
- /** @todo add support for isoc release */
- goto handle_nyet_done;
- }
- }
-
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free);
- goto handle_nyet_done;
- }
-
- _hc->qh->ping_state = 1;
- _qtd->error_count = 0;
-
- update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, _qtd,
- DWC_OTG_HC_XFER_NYET);
- save_data_toggle(_hc, _hc_regs, _qtd);
-
- /*
- * Halt the channel and re-start the transfer so the PING
- * protocol will start.
- */
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free);
-
-handle_nyet_done:
- disable_hc_int(_hc_regs,nyet);
- clear_hc_int(_hc_regs, nyet);
- return 1;
-}
-
-/**
- * Handles a host channel babble interrupt. This handler may be called in
- * either DMA mode or Slave mode.
- */
-static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Babble Error--\n", _hc->hc_num);
- if (_hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
- dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EOVERFLOW);
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_BABBLE_ERR, must_free);
- } else {
- dwc_otg_halt_status_e halt_status;
- halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
- DWC_OTG_HC_XFER_BABBLE_ERR);
- halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
- }
- disable_hc_int(_hc_regs,bblerr);
- return 1;
-}
-
-/**
- * Handles a host channel AHB error interrupt. This handler is only called in
- * DMA mode.
- */
-static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t *_hc,
- dwc_otg_hc_regs_t *_hc_regs,
- dwc_otg_qtd_t *_qtd)
-{
- hcchar_data_t hcchar;
- hcsplt_data_t hcsplt;
- hctsiz_data_t hctsiz;
- uint32_t hcdma;
- struct urb *urb = _qtd->urb;
-
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "AHB Error--\n", _hc->hc_num);
-
- hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
- hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt);
- hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
- hcdma = dwc_read_reg32(&_hc_regs->hcdma);
-
- DWC_ERROR("AHB ERROR, Channel %d\n", _hc->hc_num);
- DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
- DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
- DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
- DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
- (usb_pipein(urb->pipe) ? "IN" : "OUT"));
- DWC_ERROR(" Endpoint type: %s\n",
- ({char *pipetype;
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL: pipetype = "CONTROL"; break;
- case PIPE_BULK: pipetype = "BULK"; break;
- case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
- case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
- default: pipetype = "UNKNOWN"; break;
- }; pipetype;}));
- DWC_ERROR(" Speed: %s\n",
- ({char *speed;
- switch (urb->dev->speed) {
- case USB_SPEED_HIGH: speed = "HIGH"; break;
- case USB_SPEED_FULL: speed = "FULL"; break;
- case USB_SPEED_LOW: speed = "LOW"; break;
- default: speed = "UNKNOWN"; break;
- }; speed;}));
- DWC_ERROR(" Max packet size: %d\n",
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
- DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length);
- DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
- urb->transfer_buffer, (void *)(u32)urb->transfer_dma);
- DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
- urb->setup_packet, (void *)(u32)urb->setup_dma);
- DWC_ERROR(" Interval: %d\n", urb->interval);
-
- dwc_otg_hcd_complete_urb(_hcd, urb, -EIO);
-
- /*
- * Force a channel halt. Don't call halt_channel because that won't
- * write to the HCCHARn register in DMA mode to force the halt.
- */
- dwc_otg_hc_halt(_hcd->core_if, _hc, DWC_OTG_HC_XFER_AHB_ERR);
-
- disable_hc_int(_hc_regs,ahberr);
- return 1;
-}
-
-/**
- * Handles a host channel transaction error interrupt. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Transaction Error--\n", _hc->hc_num);
-
- switch (usb_pipetype(_qtd->urb->pipe)) {
- case PIPE_CONTROL:
- case PIPE_BULK:
- _qtd->error_count++;
- if (!_hc->qh->ping_state) {
- update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb,
- _qtd, DWC_OTG_HC_XFER_XACT_ERR);
- save_data_toggle(_hc, _hc_regs, _qtd);
- if (!_hc->ep_is_in && _qtd->urb->dev->speed == USB_SPEED_HIGH) {
- _hc->qh->ping_state = 1;
- }
- }
-
- /*
- * Halt the channel so the transfer can be re-started from
- * the appropriate point or the PING protocol will start.
- */
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
- break;
- case PIPE_INTERRUPT:
- _qtd->error_count++;
- if ((_hc->do_split) && (_hc->complete_split)) {
- _qtd->complete_split = 0;
- }
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
- break;
- case PIPE_ISOCHRONOUS:
- {
- dwc_otg_halt_status_e halt_status;
- halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
- DWC_OTG_HC_XFER_XACT_ERR);
-
- halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
- }
- break;
- }
-
-
- disable_hc_int(_hc_regs,xacterr);
-
- return 1;
-}
-
-/**
- * Handles a host channel frame overrun interrupt. This handler may be called
- * in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Frame Overrun--\n", _hc->hc_num);
-
- switch (usb_pipetype(_qtd->urb->pipe)) {
- case PIPE_CONTROL:
- case PIPE_BULK:
- break;
- case PIPE_INTERRUPT:
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN, must_free);
- break;
- case PIPE_ISOCHRONOUS:
- {
- dwc_otg_halt_status_e halt_status;
- halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
- DWC_OTG_HC_XFER_FRAME_OVERRUN);
-
- halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
- }
- break;
- }
-
- disable_hc_int(_hc_regs,frmovrun);
-
- return 1;
-}
-
-/**
- * Handles a host channel data toggle error interrupt. This handler may be
- * called in either DMA mode or Slave mode.
- */
-static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Data Toggle Error--\n", _hc->hc_num);
-
- if (_hc->ep_is_in) {
- _qtd->error_count = 0;
- } else {
- DWC_ERROR("Data Toggle Error on OUT transfer,"
- "channel %d\n", _hc->hc_num);
- }
-
- disable_hc_int(_hc_regs,datatglerr);
-
- return 1;
-}
-
-#ifdef DEBUG
-/**
- * This function is for debug only. It checks that a valid halt status is set
- * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
- * taken and a warning is issued.
- * @return 1 if halt status is ok, 0 otherwise.
- */
-static inline int halt_status_ok(dwc_otg_hcd_t *_hcd,
- dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-{
- hcchar_data_t hcchar;
- hctsiz_data_t hctsiz;
- hcint_data_t hcint;
- hcintmsk_data_t hcintmsk;
- hcsplt_data_t hcsplt;
-
- if (_hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
- /*
- * This code is here only as a check. This condition should
- * never happen. Ignore the halt if it does occur.
- */
- hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
- hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
- hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
- hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk);
- hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt);
- DWC_WARN("%s: _hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
- "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
- "hcint 0x%08x, hcintmsk 0x%08x, "
- "hcsplt 0x%08x, qtd->complete_split %d\n",
- __func__, _hc->hc_num, hcchar.d32, hctsiz.d32,
- hcint.d32, hcintmsk.d32,
- hcsplt.d32, _qtd->complete_split);
-
- DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
- __func__, _hc->hc_num);
- DWC_WARN("\n");
- clear_hc_int(_hc_regs,chhltd);
- return 0;
- }
-
- /*
- * This code is here only as a check. hcchar.chdis should
- * never be set when the halt interrupt occurs. Halt the
- * channel again if it does occur.
- */
- hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
- if (hcchar.b.chdis) {
- DWC_WARN("%s: hcchar.chdis set unexpectedly, "
- "hcchar 0x%08x, trying to halt again\n",
- __func__, hcchar.d32);
- clear_hc_int(_hc_regs,chhltd);
- _hc->halt_pending = 0;
- halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
- return 0;
- }
-
- return 1;
-}
-#endif
-
-/**
- * Handles a host Channel Halted interrupt in DMA mode. This handler
- * determines the reason the channel halted and proceeds accordingly.
- */
-static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *_hcd,
- dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-{
- hcint_data_t hcint;
- hcintmsk_data_t hcintmsk;
-
- if (_hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
- _hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
- /*
- * Just release the channel. A dequeue can happen on a
- * transfer timeout. In the case of an AHB Error, the channel
- * was forced to halt because there's no way to gracefully
- * recover.
- */
- release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
- return;
- }
-
- /* Read the HCINTn register to determine the cause for the halt. */
- hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
- hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk);
-
- if (hcint.b.xfercomp) {
- /** @todo This is here because of a possible hardware bug. Spec
- * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
- * interrupt w/ACK bit set should occur, but I only see the
- * XFERCOMP bit, even with it masked out. This is a workaround
- * for that behavior. Should fix this when hardware is fixed.
- */
- if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!_hc->ep_is_in)) {
- handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
- }
- handle_hc_xfercomp_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
- } else if (hcint.b.stall) {
- handle_hc_stall_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
- } else if (hcint.b.xacterr) {
- /*
- * Must handle xacterr before nak or ack. Could get a xacterr
- * at the same time as either of these on a BULK/CONTROL OUT
- * that started with a PING. The xacterr takes precedence.
- */
- handle_hc_xacterr_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
- } else if (hcint.b.nyet) {
- /*
- * Must handle nyet before nak or ack. Could get a nyet at the
- * same time as either of those on a BULK/CONTROL OUT that
- * started with a PING. The nyet takes precedence.
- */
- handle_hc_nyet_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
- } else if (hcint.b.bblerr) {
- handle_hc_babble_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
- } else if (hcint.b.frmovrun) {
- handle_hc_frmovrun_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
- } else if (hcint.b.datatglerr) {
- handle_hc_datatglerr_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
- _hc->qh->data_toggle = 0;
- halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
- } else if (hcint.b.nak && !hcintmsk.b.nak) {
- /*
- * If nak is not masked, it's because a non-split IN transfer
- * is in an error state. In that case, the nak is handled by
- * the nak interrupt handler, not here. Handle nak here for
- * BULK/CONTROL OUT transfers, which halt on a NAK to allow
- * rewinding the buffer pointer.
- */
- handle_hc_nak_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
- } else if (hcint.b.ack && !hcintmsk.b.ack) {
- /*
- * If ack is not masked, it's because a non-split IN transfer
- * is in an error state. In that case, the ack is handled by
- * the ack interrupt handler, not here. Handle ack here for
- * split transfers. Start splits halt on ACK.
- */
- handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
- } else {
- if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
- _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
- /*
- * A periodic transfer halted with no other channel
- * interrupts set. Assume it was halted by the core
- * because it could not be completed in its scheduled
- * (micro)frame.
- */
-#ifdef DEBUG
- DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
- __func__, _hc->hc_num);
-#endif /* */
- halt_channel(_hcd, _hc, _qtd,
- DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, must_free);
- } else {
-#ifdef DEBUG
- DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
- "for halting is unknown, nyet %d, hcint 0x%08x, intsts 0x%08x\n",
- __func__, _hc->hc_num, hcint.b.nyet, hcint.d32,
- dwc_read_reg32(&_hcd->core_if->core_global_regs->gintsts));
-#endif
- halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
- }
- }
-}
-
-/**
- * Handles a host channel Channel Halted interrupt.
- *
- * In slave mode, this handler is called only when the driver specifically
- * requests a halt. This occurs during handling other host channel interrupts
- * (e.g. nak, xacterr, stall, nyet, etc.).
- *
- * In DMA mode, this is the interrupt that occurs when the core has finished
- * processing a transfer on a channel. Other host channel interrupts (except
- * ahberr) are disabled in DMA mode.
- */
-static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *_hcd,
- dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-{
- DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "Channel Halted--\n", _hc->hc_num);
-
- if (_hcd->core_if->dma_enable) {
- handle_hc_chhltd_intr_dma(_hcd, _hc, _hc_regs, _qtd, must_free);
- } else {
-#ifdef DEBUG
- if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd, must_free)) {
- return 1;
- }
-#endif /* */
- release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
- }
-
- return 1;
-}
-
-/** Handles interrupt for a specific Host Channel */
-int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num)
-{
- int must_free = 0;
- int retval = 0;
- hcint_data_t hcint;
- hcintmsk_data_t hcintmsk;
- dwc_hc_t *hc;
- dwc_otg_hc_regs_t *hc_regs;
- dwc_otg_qtd_t *qtd;
-
- DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num);
-
- hc = _dwc_otg_hcd->hc_ptr_array[_num];
- hc_regs = _dwc_otg_hcd->core_if->host_if->hc_regs[_num];
- qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-
- hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
- hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
- DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
- hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
- hcint.d32 = hcint.d32 & hcintmsk.d32;
-
- if (!_dwc_otg_hcd->core_if->dma_enable) {
- if ((hcint.b.chhltd) && (hcint.d32 != 0x2)) {
- hcint.b.chhltd = 0;
- }
- }
-
- if (hcint.b.xfercomp) {
- retval |= handle_hc_xfercomp_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
- /*
- * If NYET occurred at same time as Xfer Complete, the NYET is
- * handled by the Xfer Complete interrupt handler. Don't want
- * to call the NYET interrupt handler in this case.
- */
- hcint.b.nyet = 0;
- }
- if (hcint.b.chhltd) {
- retval |= handle_hc_chhltd_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
- }
- if (hcint.b.ahberr) {
- retval |= handle_hc_ahberr_intr(_dwc_otg_hcd, hc, hc_regs, qtd);
- }
- if (hcint.b.stall) {
- retval |= handle_hc_stall_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
- }
- if (hcint.b.nak) {
- retval |= handle_hc_nak_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
- }
- if (hcint.b.ack) {
- retval |= handle_hc_ack_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
- }
- if (hcint.b.nyet) {
- retval |= handle_hc_nyet_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
- }
- if (hcint.b.xacterr) {
- retval |= handle_hc_xacterr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
- }
- if (hcint.b.bblerr) {
- retval |= handle_hc_babble_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
- }
- if (hcint.b.frmovrun) {
- retval |= handle_hc_frmovrun_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
- }
- if (hcint.b.datatglerr) {
- retval |= handle_hc_datatglerr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
- }
-
- /*
- * Logic to free the qtd here, at the end of the hc intr
- * processing, if the handling of this interrupt determined
- * that it needs to be freed.
- */
- if (must_free) {
- /* Free the qtd here now that we are done using it. */
- dwc_otg_hcd_qtd_free(qtd);
- }
- return retval;
-}
-
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
deleted file mode 100644
index fcb5ce634a..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+++ /dev/null
@@ -1,794 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 537387 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-#ifndef DWC_DEVICE_ONLY
-
-/**
- * @file
- *
- * This file contains the functions to manage Queue Heads and Queue
- * Transfer Descriptors.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-
-#include "dwc_otg_driver.h"
-#include "dwc_otg_hcd.h"
-#include "dwc_otg_regs.h"
-
-/**
- * This function allocates and initializes a QH.
- *
- * @param _hcd The HCD state structure for the DWC OTG controller.
- * @param[in] _urb Holds the information about the device/endpoint that we need
- * to initialize the QH.
- *
- * @return Returns pointer to the newly allocated QH, or NULL on error. */
-dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb)
-{
- dwc_otg_qh_t *qh;
-
- /* Allocate memory */
- /** @todo add memflags argument */
- qh = dwc_otg_hcd_qh_alloc ();
- if (qh == NULL) {
- return NULL;
- }
-
- dwc_otg_hcd_qh_init (_hcd, qh, _urb);
- return qh;
-}
-
-/** Free each QTD in the QH's QTD-list then free the QH. QH should already be
- * removed from a list. QTD list should already be empty if called from URB
- * Dequeue.
- *
- * @param[in] _qh The QH to free.
- */
-void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh)
-{
- dwc_otg_qtd_t *qtd;
- struct list_head *pos;
- unsigned long flags;
-
- /* Free each QTD in the QTD list */
- local_irq_save (flags);
- for (pos = _qh->qtd_list.next;
- pos != &_qh->qtd_list;
- pos = _qh->qtd_list.next)
- {
- list_del (pos);
- qtd = dwc_list_to_qtd (pos);
- dwc_otg_hcd_qtd_free (qtd);
- }
- local_irq_restore (flags);
-
- kfree (_qh);
- return;
-}
-
-/** Initializes a QH structure.
- *
- * @param[in] _hcd The HCD state structure for the DWC OTG controller.
- * @param[in] _qh The QH to init.
- * @param[in] _urb Holds the information about the device/endpoint that we need
- * to initialize the QH. */
-#define SCHEDULE_SLOP 10
-void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb)
-{
- memset (_qh, 0, sizeof (dwc_otg_qh_t));
-
- /* Initialize QH */
- switch (usb_pipetype(_urb->pipe)) {
- case PIPE_CONTROL:
- _qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
- break;
- case PIPE_BULK:
- _qh->ep_type = USB_ENDPOINT_XFER_BULK;
- break;
- case PIPE_ISOCHRONOUS:
- _qh->ep_type = USB_ENDPOINT_XFER_ISOC;
- break;
- case PIPE_INTERRUPT:
- _qh->ep_type = USB_ENDPOINT_XFER_INT;
- break;
- }
-
- _qh->ep_is_in = usb_pipein(_urb->pipe) ? 1 : 0;
-
- _qh->data_toggle = DWC_OTG_HC_PID_DATA0;
- _qh->maxp = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe)));
- INIT_LIST_HEAD(&_qh->qtd_list);
- INIT_LIST_HEAD(&_qh->qh_list_entry);
- _qh->channel = NULL;
-
- /* FS/LS Enpoint on HS Hub
- * NOT virtual root hub */
- _qh->do_split = 0;
- _qh->speed = _urb->dev->speed;
- if (((_urb->dev->speed == USB_SPEED_LOW) ||
- (_urb->dev->speed == USB_SPEED_FULL)) &&
- (_urb->dev->tt) && (_urb->dev->tt->hub) && (_urb->dev->tt->hub->devnum != 1)) {
- DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
- usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum,
- _urb->dev->ttport);
- _qh->do_split = 1;
- }
-
- if (_qh->ep_type == USB_ENDPOINT_XFER_INT ||
- _qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
- /* Compute scheduling parameters once and save them. */
- hprt0_data_t hprt;
-
- /** @todo Account for split transfers in the bus time. */
- int bytecount = dwc_hb_mult(_qh->maxp) * dwc_max_packet(_qh->maxp);
- _qh->usecs = NS_TO_US(usb_calc_bus_time(_urb->dev->speed,
- usb_pipein(_urb->pipe),
- (_qh->ep_type == USB_ENDPOINT_XFER_ISOC),bytecount));
-
- /* Start in a slightly future (micro)frame. */
- _qh->sched_frame = dwc_frame_num_inc(_hcd->frame_number, SCHEDULE_SLOP);
- _qh->interval = _urb->interval;
-#if 0
- /* Increase interrupt polling rate for debugging. */
- if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
- _qh->interval = 8;
- }
-#endif
- hprt.d32 = dwc_read_reg32(_hcd->core_if->host_if->hprt0);
- if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
- ((_urb->dev->speed == USB_SPEED_LOW) ||
- (_urb->dev->speed == USB_SPEED_FULL)))
- {
- _qh->interval *= 8;
- _qh->sched_frame |= 0x7;
- _qh->start_split_frame = _qh->sched_frame;
- }
- }
-
- DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", _qh);
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n",
- _urb->dev->devnum);
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n",
- usb_pipeendpoint(_urb->pipe),
- usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n",
- ({ char *speed; switch (_urb->dev->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }; speed;}));
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n",
- ({ char *type; switch (_qh->ep_type) {
- case USB_ENDPOINT_XFER_ISOC: type = "isochronous"; break;
- case USB_ENDPOINT_XFER_INT: type = "interrupt"; break;
- case USB_ENDPOINT_XFER_CONTROL: type = "control"; break;
- case USB_ENDPOINT_XFER_BULK: type = "bulk"; break;
- default: type = "?"; break;
- }; type;}));
-#ifdef DEBUG
- if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
- _qh->usecs);
- DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
- _qh->interval);
- }
-#endif
-
- return;
-}
-
-/**
- * Microframe scheduler
- * track the total use in hcd->frame_usecs
- * keep each qh use in qh->frame_usecs
- * when surrendering the qh then donate the time back
- */
-const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 };
-
-/*
- * called from dwc_otg_hcd.c:dwc_otg_hcd_init
- */
-int init_hcd_usecs(dwc_otg_hcd_t *_hcd)
-{
- int i;
- for (i=0; i<8; i++) {
- _hcd->frame_usecs[i] = max_uframe_usecs[i];
- }
- return 0;
-}
-
-static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-{
- int i;
- unsigned short utime;
- int t_left;
- int ret;
- int done;
-
- ret = -1;
- utime = _qh->usecs;
- t_left = utime;
- i = 0;
- done = 0;
- while (done == 0) {
- /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */
- if (utime <= _hcd->frame_usecs[i]) {
- _hcd->frame_usecs[i] -= utime;
- _qh->frame_usecs[i] += utime;
- t_left -= utime;
- ret = i;
- done = 1;
- return ret;
- } else {
- i++;
- if (i == 8) {
- done = 1;
- ret = -1;
- }
- }
- }
- return ret;
-}
-
-/*
- * use this for FS apps that can span multiple uframes
- */
-static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-{
- int i;
- int j;
- unsigned short utime;
- int t_left;
- int ret;
- int done;
- unsigned short xtime;
-
- ret = -1;
- utime = _qh->usecs;
- t_left = utime;
- i = 0;
- done = 0;
-loop:
- while (done == 0) {
- if(_hcd->frame_usecs[i] <= 0) {
- i++;
- if (i == 8) {
- done = 1;
- ret = -1;
- }
- goto loop;
- }
-
- /*
- * we need n consequtive slots
- * so use j as a start slot j plus j+1 must be enough time (for now)
- */
- xtime= _hcd->frame_usecs[i];
- for (j = i+1 ; j < 8 ; j++ ) {
- /*
- * if we add this frame remaining time to xtime we may
- * be OK, if not we need to test j for a complete frame
- */
- if ((xtime+_hcd->frame_usecs[j]) < utime) {
- if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) {
- j = 8;
- ret = -1;
- continue;
- }
- }
- if (xtime >= utime) {
- ret = i;
- j = 8; /* stop loop with a good value ret */
- continue;
- }
- /* add the frame time to x time */
- xtime += _hcd->frame_usecs[j];
- /* we must have a fully available next frame or break */
- if ((xtime < utime)
- && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) {
- ret = -1;
- j = 8; /* stop loop with a bad value ret */
- continue;
- }
- }
- if (ret >= 0) {
- t_left = utime;
- for (j = i; (t_left>0) && (j < 8); j++ ) {
- t_left -= _hcd->frame_usecs[j];
- if ( t_left <= 0 ) {
- _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left;
- _hcd->frame_usecs[j]= -t_left;
- ret = i;
- done = 1;
- } else {
- _qh->frame_usecs[j] += _hcd->frame_usecs[j];
- _hcd->frame_usecs[j] = 0;
- }
- }
- } else {
- i++;
- if (i == 8) {
- done = 1;
- ret = -1;
- }
- }
- }
- return ret;
-}
-
-static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-{
- int ret;
- ret = -1;
-
- if (_qh->speed == USB_SPEED_HIGH) {
- /* if this is a hs transaction we need a full frame */
- ret = find_single_uframe(_hcd, _qh);
- } else {
- /* if this is a fs transaction we may need a sequence of frames */
- ret = find_multi_uframe(_hcd, _qh);
- }
- return ret;
-}
-
-/**
- * Checks that the max transfer size allowed in a host channel is large enough
- * to handle the maximum data transfer in a single (micro)frame for a periodic
- * transfer.
- *
- * @param _hcd The HCD state structure for the DWC OTG controller.
- * @param _qh QH for a periodic endpoint.
- *
- * @return 0 if successful, negative error code otherwise.
- */
-static int check_max_xfer_size(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-{
- int status;
- uint32_t max_xfer_size;
- uint32_t max_channel_xfer_size;
-
- status = 0;
-
- max_xfer_size = dwc_max_packet(_qh->maxp) * dwc_hb_mult(_qh->maxp);
- max_channel_xfer_size = _hcd->core_if->core_params->max_transfer_size;
-
- if (max_xfer_size > max_channel_xfer_size) {
- DWC_NOTICE("%s: Periodic xfer length %d > "
- "max xfer length for channel %d\n",
- __func__, max_xfer_size, max_channel_xfer_size);
- status = -ENOSPC;
- }
-
- return status;
-}
-
-/**
- * Schedules an interrupt or isochronous transfer in the periodic schedule.
- *
- * @param _hcd The HCD state structure for the DWC OTG controller.
- * @param _qh QH for the periodic transfer. The QH should already contain the
- * scheduling information.
- *
- * @return 0 if successful, negative error code otherwise.
- */
-static int schedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-{
- int status = 0;
-
- int frame;
- status = find_uframe(_hcd, _qh);
- frame = -1;
- if (status == 0) {
- frame = 7;
- } else {
- if (status > 0 )
- frame = status-1;
- }
-
- /* Set the new frame up */
- if (frame > -1) {
- _qh->sched_frame &= ~0x7;
- _qh->sched_frame |= (frame & 7);
- }
-
- if (status != -1 )
- status = 0;
- if (status) {
- DWC_NOTICE("%s: Insufficient periodic bandwidth for "
- "periodic transfer.\n", __func__);
- return status;
- }
-
- status = check_max_xfer_size(_hcd, _qh);
- if (status) {
- DWC_NOTICE("%s: Channel max transfer size too small "
- "for periodic transfer.\n", __func__);
- return status;
- }
-
- /* Always start in the inactive schedule. */
- list_add_tail(&_qh->qh_list_entry, &_hcd->periodic_sched_inactive);
-
-
- /* Update claimed usecs per (micro)frame. */
- _hcd->periodic_usecs += _qh->usecs;
-
- /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
- hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated += _qh->usecs / _qh->interval;
- if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
- hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs++;
- DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
- _qh, _qh->usecs, _qh->interval);
- } else {
- hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs++;
- DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
- _qh, _qh->usecs, _qh->interval);
- }
-
- return status;
-}
-
-/**
- * This function adds a QH to either the non periodic or periodic schedule if
- * it is not already in the schedule. If the QH is already in the schedule, no
- * action is taken.
- *
- * @return 0 if successful, negative error code otherwise.
- */
-int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-{
- unsigned long flags;
- int status = 0;
-
- local_irq_save(flags);
-
- if (!list_empty(&_qh->qh_list_entry)) {
- /* QH already in a schedule. */
- goto done;
- }
-
- /* Add the new QH to the appropriate schedule */
- if (dwc_qh_is_non_per(_qh)) {
- /* Always start in the inactive schedule. */
- list_add_tail(&_qh->qh_list_entry, &_hcd->non_periodic_sched_inactive);
- } else {
- status = schedule_periodic(_hcd, _qh);
- }
-
- done:
- local_irq_restore(flags);
-
- return status;
-}
-
-/**
- * This function adds a QH to the non periodic deferred schedule.
- *
- * @return 0 if successful, negative error code otherwise.
- */
-int dwc_otg_hcd_qh_add_deferred(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-{
- unsigned long flags;
- local_irq_save(flags);
- if (!list_empty(&_qh->qh_list_entry)) {
- /* QH already in a schedule. */
- goto done;
- }
-
- /* Add the new QH to the non periodic deferred schedule */
- if (dwc_qh_is_non_per(_qh)) {
- list_add_tail(&_qh->qh_list_entry,
- &_hcd->non_periodic_sched_deferred);
- }
-done:
- local_irq_restore(flags);
- return 0;
-}
-
-/**
- * Removes an interrupt or isochronous transfer from the periodic schedule.
- *
- * @param _hcd The HCD state structure for the DWC OTG controller.
- * @param _qh QH for the periodic transfer.
- */
-static void deschedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-{
- int i;
- list_del_init(&_qh->qh_list_entry);
-
-
- /* Update claimed usecs per (micro)frame. */
- _hcd->periodic_usecs -= _qh->usecs;
-
- for (i = 0; i < 8; i++) {
- _hcd->frame_usecs[i] += _qh->frame_usecs[i];
- _qh->frame_usecs[i] = 0;
- }
- /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
- hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated -= _qh->usecs / _qh->interval;
-
- if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
- hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs--;
- DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
- _qh, _qh->usecs, _qh->interval);
- } else {
- hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs--;
- DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
- _qh, _qh->usecs, _qh->interval);
- }
-}
-
-/**
- * Removes a QH from either the non-periodic or periodic schedule. Memory is
- * not freed.
- *
- * @param[in] _hcd The HCD state structure.
- * @param[in] _qh QH to remove from schedule. */
-void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- if (list_empty(&_qh->qh_list_entry)) {
- /* QH is not in a schedule. */
- goto done;
- }
-
- if (dwc_qh_is_non_per(_qh)) {
- if (_hcd->non_periodic_qh_ptr == &_qh->qh_list_entry) {
- _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
- }
- list_del_init(&_qh->qh_list_entry);
- } else {
- deschedule_periodic(_hcd, _qh);
- }
-
- done:
- local_irq_restore(flags);
-}
-
-/**
- * Defers a QH. For non-periodic QHs, removes the QH from the active
- * non-periodic schedule. The QH is added to the deferred non-periodic
- * schedule if any QTDs are still attached to the QH.
- */
-int dwc_otg_hcd_qh_deferr(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, int delay)
-{
- int deact = 1;
- unsigned long flags;
- local_irq_save(flags);
- if (dwc_qh_is_non_per(_qh)) {
- _qh->sched_frame =
- dwc_frame_num_inc(_hcd->frame_number,
- delay);
- _qh->channel = NULL;
- _qh->qtd_in_process = NULL;
- deact = 0;
- dwc_otg_hcd_qh_remove(_hcd, _qh);
- if (!list_empty(&_qh->qtd_list)) {
- /* Add back to deferred non-periodic schedule. */
- dwc_otg_hcd_qh_add_deferred(_hcd, _qh);
- }
- }
- local_irq_restore(flags);
- return deact;
-}
-
-/**
- * Deactivates a QH. For non-periodic QHs, removes the QH from the active
- * non-periodic schedule. The QH is added to the inactive non-periodic
- * schedule if any QTDs are still attached to the QH.
- *
- * For periodic QHs, the QH is removed from the periodic queued schedule. If
- * there are any QTDs still attached to the QH, the QH is added to either the
- * periodic inactive schedule or the periodic ready schedule and its next
- * scheduled frame is calculated. The QH is placed in the ready schedule if
- * the scheduled frame has been reached already. Otherwise it's placed in the
- * inactive schedule. If there are no QTDs attached to the QH, the QH is
- * completely removed from the periodic schedule.
- */
-void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_next_periodic_split)
-{
- unsigned long flags;
- local_irq_save(flags);
-
- if (dwc_qh_is_non_per(_qh)) {
- dwc_otg_hcd_qh_remove(_hcd, _qh);
- if (!list_empty(&_qh->qtd_list)) {
- /* Add back to inactive non-periodic schedule. */
- dwc_otg_hcd_qh_add(_hcd, _qh);
- }
- } else {
- uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
-
- if (_qh->do_split) {
- /* Schedule the next continuing periodic split transfer */
- if (sched_next_periodic_split) {
-
- _qh->sched_frame = frame_number;
- if (dwc_frame_num_le(frame_number,
- dwc_frame_num_inc(_qh->start_split_frame, 1))) {
- /*
- * Allow one frame to elapse after start
- * split microframe before scheduling
- * complete split, but DONT if we are
- * doing the next start split in the
- * same frame for an ISOC out.
- */
- if ((_qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (_qh->ep_is_in != 0)) {
- _qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, 1);
- }
- }
- } else {
- _qh->sched_frame = dwc_frame_num_inc(_qh->start_split_frame,
- _qh->interval);
- if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
- _qh->sched_frame = frame_number;
- }
- _qh->sched_frame |= 0x7;
- _qh->start_split_frame = _qh->sched_frame;
- }
- } else {
- _qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, _qh->interval);
- if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
- _qh->sched_frame = frame_number;
- }
- }
-
- if (list_empty(&_qh->qtd_list)) {
- dwc_otg_hcd_qh_remove(_hcd, _qh);
- } else {
- /*
- * Remove from periodic_sched_queued and move to
- * appropriate queue.
- */
- if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
- list_move(&_qh->qh_list_entry,
- &_hcd->periodic_sched_ready);
- } else {
- list_move(&_qh->qh_list_entry,
- &_hcd->periodic_sched_inactive);
- }
- }
- }
-
- local_irq_restore(flags);
-}
-
-/**
- * This function allocates and initializes a QTD.
- *
- * @param[in] _urb The URB to create a QTD from. Each URB-QTD pair will end up
- * pointing to each other so each pair should have a unique correlation.
- *
- * @return Returns pointer to the newly allocated QTD, or NULL on error. */
-dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *_urb)
-{
- dwc_otg_qtd_t *qtd;
-
- qtd = dwc_otg_hcd_qtd_alloc ();
- if (qtd == NULL) {
- return NULL;
- }
-
- dwc_otg_hcd_qtd_init (qtd, _urb);
- return qtd;
-}
-
-/**
- * Initializes a QTD structure.
- *
- * @param[in] _qtd The QTD to initialize.
- * @param[in] _urb The URB to use for initialization. */
-void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *_qtd, struct urb *_urb)
-{
- memset (_qtd, 0, sizeof (dwc_otg_qtd_t));
- _qtd->urb = _urb;
- if (usb_pipecontrol(_urb->pipe)) {
- /*
- * The only time the QTD data toggle is used is on the data
- * phase of control transfers. This phase always starts with
- * DATA1.
- */
- _qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
- _qtd->control_phase = DWC_OTG_CONTROL_SETUP;
- }
-
- /* start split */
- _qtd->complete_split = 0;
- _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
- _qtd->isoc_split_offset = 0;
-
- /* Store the qtd ptr in the urb to reference what QTD. */
- _urb->hcpriv = _qtd;
- return;
-}
-
-/**
- * This function adds a QTD to the QTD-list of a QH. It will find the correct
- * QH to place the QTD into. If it does not find a QH, then it will create a
- * new QH. If the QH to which the QTD is added is not currently scheduled, it
- * is placed into the proper schedule based on its EP type.
- *
- * @param[in] _qtd The QTD to add
- * @param[in] _dwc_otg_hcd The DWC HCD structure
- *
- * @return 0 if successful, negative error code otherwise.
- */
-int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * _qtd, dwc_otg_hcd_t * _dwc_otg_hcd)
-{
- struct usb_host_endpoint *ep;
- dwc_otg_qh_t *qh;
- unsigned long flags;
- int retval = 0;
- struct urb *urb = _qtd->urb;
-
- local_irq_save(flags);
-
- /*
- * Get the QH which holds the QTD-list to insert to. Create QH if it
- * doesn't exist.
- */
- ep = dwc_urb_to_endpoint(urb);
- qh = (dwc_otg_qh_t *)ep->hcpriv;
- if (qh == NULL) {
- qh = dwc_otg_hcd_qh_create (_dwc_otg_hcd, urb);
- if (qh == NULL) {
- retval = -1;
- goto done;
- }
- ep->hcpriv = qh;
- }
-
- _qtd->qtd_qh_ptr = qh;
- retval = dwc_otg_hcd_qh_add(_dwc_otg_hcd, qh);
- if (retval == 0) {
- list_add_tail(&_qtd->qtd_list_entry, &qh->qtd_list);
- }
-
- done:
- local_irq_restore(flags);
- return retval;
-}
-
-#endif /* DWC_DEVICE_ONLY */
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_ifx.c b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_ifx.c
deleted file mode 100644
index e45da853ea..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_ifx.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME : dwc_otg_ifx.c
-** PROJECT : Twinpass/Danube
-** MODULES : DWC OTG USB
-**
-** DATE : 12 Auguest 2007
-** AUTHOR : Sung Winder
-** DESCRIPTION : Platform specific initialization.
-** COPYRIGHT : Copyright (c) 2007
-** Infineon Technologies AG
-** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
-** Hsin-chu City, 300 Taiwan.
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Date $Author $Comment
-** 12 Auguest 2007 Sung Winder Initiate Version
-*******************************************************************************/
-#include "dwc_otg_ifx.h"
-
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/gpio.h>
-
-#include <asm/io.h>
-//#include <asm/mach-ifxmips/ifxmips.h>
-#include <lantiq_soc.h>
-
-#define IFXMIPS_GPIO_BASE_ADDR (0xBE100B00)
-
-#define IFXMIPS_GPIO_P0_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010))
-#define IFXMIPS_GPIO_P1_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040))
-#define IFXMIPS_GPIO_P0_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014))
-#define IFXMIPS_GPIO_P1_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044))
-#define IFXMIPS_GPIO_P0_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018))
-#define IFXMIPS_GPIO_P1_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048))
-#define IFXMIPS_GPIO_P0_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C))
-#define IFXMIPS_GPIO_P1_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C))
-#define IFXMIPS_GPIO_P0_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020))
-#define IFXMIPS_GPIO_P1_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050))
-#define IFXMIPS_GPIO_P0_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024))
-#define IFXMIPS_GPIO_P1_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054))
-#define IFXMIPS_GPIO_P0_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028))
-#define IFXMIPS_GPIO_P1_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058))
-#define IFXMIPS_GPIO_P0_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C))
-#define IFXMIPS_GPIO_P1_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C))
-#define IFXMIPS_GPIO_P0_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030))
-#define IFXMIPS_GPIO_P1_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060))
-
-
-#define writel ltq_w32
-#define readl ltq_r32
-void dwc_otg_power_on (void)
-{
- // clear power
- writel(readl(DANUBE_PMU_PWDCR) | 0x41, DANUBE_PMU_PWDCR);
- // set clock gating
- if (ltq_is_ase())
- writel(readl(DANUBE_CGU_IFCCR) & ~0x20, DANUBE_CGU_IFCCR);
- else
- writel(readl(DANUBE_CGU_IFCCR) | 0x30, DANUBE_CGU_IFCCR);
- // set power
- writel(readl(DANUBE_PMU_PWDCR) & ~0x1, DANUBE_PMU_PWDCR);
- writel(readl(DANUBE_PMU_PWDCR) & ~0x40, DANUBE_PMU_PWDCR);
- writel(readl(DANUBE_PMU_PWDCR) & ~0x8000, DANUBE_PMU_PWDCR);
-
-#if 1//defined (DWC_HOST_ONLY)
- // make the hardware be a host controller (default)
- //clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
- writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_HDSEL_BIT), DANUBE_RCU_UBSCFG);
-
- //#elif defined (DWC_DEVICE_ONLY)
- /* set the controller to the device mode */
- // set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
-#else
-#error "For Danube/Twinpass, it should be HOST or Device Only."
-#endif
-
- // set the HC's byte-order to big-endian
- //set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
- writel(readl(DANUBE_RCU_UBSCFG) | (1<<DANUBE_USBCFG_HOST_END_BIT), DANUBE_RCU_UBSCFG);
- //clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
- writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_SLV_END_BIT), DANUBE_RCU_UBSCFG);
- //writel(0x400, DANUBE_RCU_UBSCFG);
-
- // PHY configurations.
- writel (0x14014, (volatile unsigned long *)0xbe10103c);
-}
-
-int ifx_usb_hc_init(unsigned long base_addr, int irq)
-{
- return 0;
-}
-
-void ifx_usb_hc_remove(void)
-{
-}
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_ifx.h b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_ifx.h
deleted file mode 100644
index 402d7a6540..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_ifx.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME : dwc_otg_ifx.h
-** PROJECT : Twinpass/Danube
-** MODULES : DWC OTG USB
-**
-** DATE : 12 April 2007
-** AUTHOR : Sung Winder
-** DESCRIPTION : Platform specific initialization.
-** COPYRIGHT : Copyright (c) 2007
-** Infineon Technologies AG
-** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
-** Hsin-chu City, 300 Taiwan.
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Date $Author $Comment
-** 12 April 2007 Sung Winder Initiate Version
-*******************************************************************************/
-#if !defined(__DWC_OTG_IFX_H__)
-#define __DWC_OTG_IFX_H__
-
-#include <linux/irq.h>
-#include <irq.h>
-
-// 20070316, winder added.
-#ifndef SZ_256K
-#define SZ_256K 0x00040000
-#endif
-
-extern void dwc_otg_power_on (void);
-
-/* FIXME: The current Linux-2.6 do not have these header files, but anyway, we need these. */
-// #include <asm/danube/danube.h>
-// #include <asm/ifx/irq.h>
-
-/* winder, I used the Danube parameter as default. *
- * We could change this through module param. */
-#define IFX_USB_IOMEM_BASE 0x1e101000
-#define IFX_USB_IOMEM_SIZE SZ_256K
-#define IFX_USB_IRQ LTQ_USB_INT
-
-/**
- * This function is called to set correct clock gating and power.
- * For Twinpass/Danube board.
- */
-#ifndef DANUBE_RCU_BASE_ADDR
-#define DANUBE_RCU_BASE_ADDR (0xBF203000)
-#endif
-
-#ifndef DANUBE_CGU
-#define DANUBE_CGU (0xBF103000)
-#endif
-#ifndef DANUBE_CGU_IFCCR
-/***CGU Interface Clock Control Register***/
-#define DANUBE_CGU_IFCCR ((volatile u32*)(DANUBE_CGU+ 0x0018))
-#endif
-
-#ifndef DANUBE_PMU
-#define DANUBE_PMU (KSEG1+0x1F102000)
-#endif
-#ifndef DANUBE_PMU_PWDCR
-/* PMU Power down Control Register */
-#define DANUBE_PMU_PWDCR ((volatile u32*)(DANUBE_PMU+0x001C))
-#endif
-
-
-#define DANUBE_RCU_UBSCFG ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x18))
-#define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
-#define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
-#define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-
-extern void ltq_mask_and_ack_irq(struct irq_data *d);
-
-static void inline mask_and_ack_ifx_irq(int x)
-{
- struct irq_data d;
- d.irq = x;
- ltq_mask_and_ack_irq(&d);
-}
-#endif //__DWC_OTG_IFX_H__
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_plat.h b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_plat.h
deleted file mode 100644
index 727d0c4a52..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_plat.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/platform/dwc_otg_plat.h $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 510301 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#if !defined(__DWC_OTG_PLAT_H__)
-#define __DWC_OTG_PLAT_H__
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-/**
- * @file
- *
- * This file contains the Platform Specific constants, interfaces
- * (functions and macros) for Linux.
- *
- */
-/*#if !defined(__LINUX__)
-#error "The contents of this file is Linux specific!!!"
-#endif
-*/
-#include <lantiq_soc.h>
-#define writel ltq_w32
-#define readl ltq_r32
-
-/**
- * Reads the content of a register.
- *
- * @param _reg address of register to read.
- * @return contents of the register.
- *
-
- * Usage:<br>
- * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code>
- */
-static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *_reg)
-{
- return readl(_reg);
-};
-
-/**
- * Writes a register with a 32 bit value.
- *
- * @param _reg address of register to read.
- * @param _value to write to _reg.
- *
- * Usage:<br>
- * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
- */
-static __inline__ void dwc_write_reg32( volatile uint32_t *_reg, const uint32_t _value)
-{
- writel( _value, _reg );
-};
-
-/**
- * This function modifies bit values in a register. Using the
- * algorithm: (reg_contents & ~clear_mask) | set_mask.
- *
- * @param _reg address of register to read.
- * @param _clear_mask bit mask to be cleared.
- * @param _set_mask bit mask to be set.
- *
- * Usage:<br>
- * <code> // Clear the SOF Interrupt Mask bit and <br>
- * // set the OTG Interrupt mask bit, leaving all others as they were.
- * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
- */
-static __inline__
- void dwc_modify_reg32( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
-{
- writel( (readl(_reg) & ~_clear_mask) | _set_mask, _reg );
-};
-
-
-/**
- * Wrapper for the OS micro-second delay function.
- * @param[in] _usecs Microseconds of delay
- */
-static __inline__ void UDELAY( const uint32_t _usecs )
-{
- udelay( _usecs );
-}
-
-/**
- * Wrapper for the OS milli-second delay function.
- * @param[in] _msecs milliseconds of delay
- */
-static __inline__ void MDELAY( const uint32_t _msecs )
-{
- mdelay( _msecs );
-}
-
-/**
- * Wrapper for the Linux spin_lock. On the ARM (Integrator)
- * spin_lock() is a nop.
- *
- * @param _lock Pointer to the spinlock.
- */
-static __inline__ void SPIN_LOCK( spinlock_t *_lock )
-{
- spin_lock(_lock);
-}
-
-/**
- * Wrapper for the Linux spin_unlock. On the ARM (Integrator)
- * spin_lock() is a nop.
- *
- * @param _lock Pointer to the spinlock.
- */
-static __inline__ void SPIN_UNLOCK( spinlock_t *_lock )
-{
- spin_unlock(_lock);
-}
-
-/**
- * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM
- * (Integrator) spin_lock() is a nop.
- *
- * @param _l Pointer to the spinlock.
- * @param _f unsigned long for irq flags storage.
- */
-#define SPIN_LOCK_IRQSAVE( _l, _f ) { \
- spin_lock_irqsave(_l,_f); \
- }
-
-/**
- * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM
- * (Integrator) spin_lock() is a nop.
- *
- * @param _l Pointer to the spinlock.
- * @param _f unsigned long for irq flags storage.
- */
-#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) {\
- spin_unlock_irqrestore(_l,_f); \
- }
-
-
-/*
- * Debugging support vanishes in non-debug builds.
- */
-
-
-/**
- * The Debug Level bit-mask variable.
- */
-extern uint32_t g_dbg_lvl;
-/**
- * Set the Debug Level variable.
- */
-static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
-{
- uint32_t old = g_dbg_lvl;
- g_dbg_lvl = _new;
- return old;
-}
-
-/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
-#define DBG_CIL (0x2)
-/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
- * messages */
-#define DBG_CILV (0x20)
-/** When debug level has the DBG_PCD bit set, display PCD (Device) debug
- * messages */
-#define DBG_PCD (0x4)
-/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
- * messages */
-#define DBG_PCDV (0x40)
-/** When debug level has the DBG_HCD bit set, display Host debug messages */
-#define DBG_HCD (0x8)
-/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
- * messages */
-#define DBG_HCDV (0x80)
-/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
- * mode. */
-#define DBG_HCD_URB (0x800)
-
-/** When debug level has any bit set, display debug messages */
-#define DBG_ANY (0xFF)
-
-/** All debug messages off */
-#define DBG_OFF 0
-
-/** Prefix string for DWC_DEBUG print macros. */
-#define USB_DWC "DWC_otg: "
-
-/**
- * Print a debug message when the Global debug level variable contains
- * the bit defined in <code>lvl</code>.
- *
- * @param[in] lvl - Debug level, use one of the DBG_ constants above.
- * @param[in] x - like printf
- *
- * Example:<p>
- * <code>
- * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
- * </code>
- * <br>
- * results in:<br>
- * <code>
- * usb-DWC_otg: dwc_otg_cil_init(ca867000)
- * </code>
- */
-#ifdef DEBUG
-
-# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
-# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x )
-
-# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
-
-#else
-
-# define DWC_DEBUGPL(lvl, x...) do{}while(0)
-# define DWC_DEBUGP(x...)
-
-# define CHK_DEBUG_LEVEL(level) (0)
-
-#endif /*DEBUG*/
-
-/**
- * Print an Error message.
- */
-#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
-/**
- * Print a Warning message.
- */
-#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
-/**
- * Print a notice (normal but significant message).
- */
-#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
-/**
- * Basic message printing.
- */
-#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
-
-#endif
-
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_regs.h b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_regs.h
deleted file mode 100644
index 397a954f39..0000000000
--- a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_regs.h
+++ /dev/null
@@ -1,1797 +0,0 @@
-/* ==========================================================================
- * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_regs.h $
- * $Revision: 1.1.1.1 $
- * $Date: 2009-04-17 06:15:34 $
- * $Change: 631780 $
- *
- * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
- * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
- * otherwise expressly agreed to in writing between Synopsys and you.
- *
- * The Software IS NOT an item of Licensed Software or Licensed Product under
- * any End User Software License Agreement or Agreement for Licensed Product
- * with Synopsys or any supplement thereto. You are permitted to use and
- * redistribute this Software in source and binary forms, with or without
- * modification, provided that redistributions of source code must retain this
- * notice. You may not view, use, disclose, copy or distribute this file or
- * any information contained herein except pursuant to this license grant from
- * Synopsys. If you do not agree with this notice, including the disclaimer
- * below, then you are not authorized to use the Software.
- *
- * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- * ========================================================================== */
-
-#ifndef __DWC_OTG_REGS_H__
-#define __DWC_OTG_REGS_H__
-
-/**
- * @file
- *
- * This file contains the data structures for accessing the DWC_otg core registers.
- *
- * The application interfaces with the HS OTG core by reading from and
- * writing to the Control and Status Register (CSR) space through the
- * AHB Slave interface. These registers are 32 bits wide, and the
- * addresses are 32-bit-block aligned.
- * CSRs are classified as follows:
- * - Core Global Registers
- * - Device Mode Registers
- * - Device Global Registers
- * - Device Endpoint Specific Registers
- * - Host Mode Registers
- * - Host Global Registers
- * - Host Port CSRs
- * - Host Channel Specific Registers
- *
- * Only the Core Global registers can be accessed in both Device and
- * Host modes. When the HS OTG core is operating in one mode, either
- * Device or Host, the application must not access registers from the
- * other mode. When the core switches from one mode to another, the
- * registers in the new mode of operation must be reprogrammed as they
- * would be after a power-on reset.
- */
-
-/****************************************************************************/
-/** DWC_otg Core registers .
- * The dwc_otg_core_global_regs structure defines the size
- * and relative field offsets for the Core Global registers.
- */
-typedef struct dwc_otg_core_global_regs
-{
- /** OTG Control and Status Register. <i>Offset: 000h</i> */
- volatile uint32_t gotgctl;
- /** OTG Interrupt Register. <i>Offset: 004h</i> */
- volatile uint32_t gotgint;
- /**Core AHB Configuration Register. <i>Offset: 008h</i> */
- volatile uint32_t gahbcfg;
-#define DWC_GLBINTRMASK 0x0001
-#define DWC_DMAENABLE 0x0020
-#define DWC_NPTXEMPTYLVL_EMPTY 0x0080
-#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000
-#define DWC_PTXEMPTYLVL_EMPTY 0x0100
-#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000
-
-
- /**Core USB Configuration Register. <i>Offset: 00Ch</i> */
- volatile uint32_t gusbcfg;
- /**Core Reset Register. <i>Offset: 010h</i> */
- volatile uint32_t grstctl;
- /**Core Interrupt Register. <i>Offset: 014h</i> */
- volatile uint32_t gintsts;
- /**Core Interrupt Mask Register. <i>Offset: 018h</i> */
- volatile uint32_t gintmsk;
- /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */
- volatile uint32_t grxstsr;
- /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/
- volatile uint32_t grxstsp;
- /**Receive FIFO Size Register. <i>Offset: 024h</i> */
- volatile uint32_t grxfsiz;
- /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */
- volatile uint32_t gnptxfsiz;
- /**Non Periodic Transmit FIFO/Queue Status Register (Read
- * Only). <i>Offset: 02Ch</i> */
- volatile uint32_t gnptxsts;
- /**I2C Access Register. <i>Offset: 030h</i> */
- volatile uint32_t gi2cctl;
- /**PHY Vendor Control Register. <i>Offset: 034h</i> */
- volatile uint32_t gpvndctl;
- /**General Purpose Input/Output Register. <i>Offset: 038h</i> */
- volatile uint32_t ggpio;
- /**User ID Register. <i>Offset: 03Ch</i> */
- volatile uint32_t guid;
- /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */
- volatile uint32_t gsnpsid;
- /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */
- volatile uint32_t ghwcfg1;
- /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */
- volatile uint32_t ghwcfg2;
-#define DWC_SLAVE_ONLY_ARCH 0
-#define DWC_EXT_DMA_ARCH 1
-#define DWC_INT_DMA_ARCH 2
-
-#define DWC_MODE_HNP_SRP_CAPABLE 0
-#define DWC_MODE_SRP_ONLY_CAPABLE 1
-#define DWC_MODE_NO_HNP_SRP_CAPABLE 2
-#define DWC_MODE_SRP_CAPABLE_DEVICE 3
-#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4
-#define DWC_MODE_SRP_CAPABLE_HOST 5
-#define DWC_MODE_NO_SRP_CAPABLE_HOST 6
-
- /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */
- volatile uint32_t ghwcfg3;
- /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/
- volatile uint32_t ghwcfg4;
- /** Reserved <i>Offset: 054h-0FFh</i> */
- uint32_t reserved[43];
- /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
- volatile uint32_t hptxfsiz;
- /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
- otherwise Device Transmit FIFO#n Register.
- * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
- //volatile uint32_t dptxfsiz[15];
- volatile uint32_t dptxfsiz_dieptxf[15];
-} dwc_otg_core_global_regs_t;
-
-/**
- * This union represents the bit fields of the Core OTG Control
- * and Status Register (GOTGCTL). Set the bits using the bit
- * fields then write the <i>d32</i> value to the register.
- */
-typedef union gotgctl_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned reserved31_21 : 11;
- unsigned currmod : 1;
- unsigned bsesvld : 1;
- unsigned asesvld : 1;
- unsigned reserved17 : 1;
- unsigned conidsts : 1;
- unsigned reserved15_12 : 4;
- unsigned devhnpen : 1;
- unsigned hstsethnpen : 1;
- unsigned hnpreq : 1;
- unsigned hstnegscs : 1;
- unsigned reserved7_2 : 6;
- unsigned sesreq : 1;
- unsigned sesreqscs : 1;
- } b;
-} gotgctl_data_t;
-
-/**
- * This union represents the bit fields of the Core OTG Interrupt Register
- * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i>
- * value to the register.
- */
-typedef union gotgint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** Current Mode */
- unsigned reserved31_20 : 12;
- /** Debounce Done */
- unsigned debdone : 1;
- /** A-Device Timeout Change */
- unsigned adevtoutchng : 1;
- /** Host Negotiation Detected */
- unsigned hstnegdet : 1;
- unsigned reserver16_10 : 7;
- /** Host Negotiation Success Status Change */
- unsigned hstnegsucstschng : 1;
- /** Session Request Success Status Change */
- unsigned sesreqsucstschng : 1;
- unsigned reserved3_7 : 5;
- /** Session End Detected */
- unsigned sesenddet : 1;
- /** Current Mode */
- unsigned reserved1_0 : 2;
- } b;
-} gotgint_data_t;
-
-
-/**
- * This union represents the bit fields of the Core AHB Configuration
- * Register (GAHBCFG). Set/clear the bits using the bit fields then
- * write the <i>d32</i> value to the register.
- */
-typedef union gahbcfg_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
-#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1
-#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
- unsigned reserved9_31 : 23;
- unsigned ptxfemplvl : 1;
- unsigned nptxfemplvl_txfemplvl : 1;
-#define DWC_GAHBCFG_DMAENABLE 1
- unsigned reserved : 1;
- unsigned dmaenable : 1;
-#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5
-#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7
- unsigned hburstlen : 4;
- unsigned glblintrmsk : 1;
-#define DWC_GAHBCFG_GLBINT_ENABLE 1
-
- } b;
-} gahbcfg_data_t;
-
-/**
- * This union represents the bit fields of the Core USB Configuration
- * Register (GUSBCFG). Set the bits using the bit fields then write
- * the <i>d32</i> value to the register.
- */
-typedef union gusbcfg_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned corrupt_tx_packet: 1; /*fscz*/
- unsigned force_device_mode: 1;
- unsigned force_host_mode: 1;
- unsigned reserved23_28 : 6;
- unsigned term_sel_dl_pulse : 1;
- unsigned ulpi_int_vbus_indicator : 1;
- unsigned ulpi_ext_vbus_drv : 1;
- unsigned ulpi_clk_sus_m : 1;
- unsigned ulpi_auto_res : 1;
- unsigned ulpi_fsls : 1;
- unsigned otgutmifssel : 1;
- unsigned phylpwrclksel : 1;
- unsigned nptxfrwnden : 1;
- unsigned usbtrdtim : 4;
- unsigned hnpcap : 1;
- unsigned srpcap : 1;
- unsigned ddrsel : 1;
- unsigned physel : 1;
- unsigned fsintf : 1;
- unsigned ulpi_utmi_sel : 1;
- unsigned phyif : 1;
- unsigned toutcal : 3;
- } b;
-} gusbcfg_data_t;
-
-/**
- * This union represents the bit fields of the Core Reset Register
- * (GRSTCTL). Set/clear the bits using the bit fields then write the
- * <i>d32</i> value to the register.
- */
-typedef union grstctl_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- /** AHB Master Idle. Indicates the AHB Master State
- * Machine is in IDLE condition. */
- unsigned ahbidle : 1;
- /** DMA Request Signal. Indicated DMA request is in
- * probress. Used for debug purpose. */
- unsigned dmareq : 1;
- /** Reserved */
- unsigned reserved29_11 : 19;
- /** TxFIFO Number (TxFNum) (Device and Host).
- *
- * This is the FIFO number which needs to be flushed,
- * using the TxFIFO Flush bit. This field should not
- * be changed until the TxFIFO Flush bit is cleared by
- * the core.
- * - 0x0 : Non Periodic TxFIFO Flush
- * - 0x1 : Periodic TxFIFO #1 Flush in device mode
- * or Periodic TxFIFO in host mode
- * - 0x2 : Periodic TxFIFO #2 Flush in device mode.
- * - ...
- * - 0xF : Periodic TxFIFO #15 Flush in device mode
- * - 0x10: Flush all the Transmit NonPeriodic and
- * Transmit Periodic FIFOs in the core
- */
- unsigned txfnum : 5;
- /** TxFIFO Flush (TxFFlsh) (Device and Host).
- *
- * This bit is used to selectively flush a single or
- * all transmit FIFOs. The application must first
- * ensure that the core is not in the middle of a
- * transaction. <p>The application should write into
- * this bit, only after making sure that neither the
- * DMA engine is writing into the TxFIFO nor the MAC
- * is reading the data out of the FIFO. <p>The
- * application should wait until the core clears this
- * bit, before performing any operations. This bit
- * will takes 8 clocks (slowest of PHY or AHB clock)
- * to clear.
- */
- unsigned txfflsh : 1;
- /** RxFIFO Flush (RxFFlsh) (Device and Host)
- *
- * The application can flush the entire Receive FIFO
- * using this bit. <p>The application must first
- * ensure that the core is not in the middle of a
- * transaction. <p>The application should write into
- * this bit, only after making sure that neither the
- * DMA engine is reading from the RxFIFO nor the MAC
- * is writing the data in to the FIFO. <p>The
- * application should wait until the bit is cleared
- * before performing any other operations. This bit
- * will takes 8 clocks (slowest of PHY or AHB clock)
- * to clear.
- */
- unsigned rxfflsh : 1;
- /** In Token Sequence Learning Queue Flush
- * (INTknQFlsh) (Device Only)
- */
- unsigned intknqflsh : 1;
- /** Host Frame Counter Reset (Host Only)<br>
- *
- * The application can reset the (micro)frame number
- * counter inside the core, using this bit. When the
- * (micro)frame counter is reset, the subsequent SOF
- * sent out by the core, will have a (micro)frame
- * number of 0.
- */
- unsigned hstfrm : 1;
- /** Hclk Soft Reset
- *
- * The application uses this bit to reset the control logic in
- * the AHB clock domain. Only AHB clock domain pipelines are
- * reset.
- */
- unsigned hsftrst : 1;
- /** Core Soft Reset (CSftRst) (Device and Host)
- *
- * The application can flush the control logic in the
- * entire core using this bit. This bit resets the
- * pipelines in the AHB Clock domain as well as the
- * PHY Clock domain.
- *
- * The state machines are reset to an IDLE state, the
- * control bits in the CSRs are cleared, all the
- * transmit FIFOs and the receive FIFO are flushed.
- *
- * The status mask bits that control the generation of
- * the interrupt, are cleared, to clear the
- * interrupt. The interrupt status bits are not
- * cleared, so the application can get the status of
- * any events that occurred in the core after it has
- * set this bit.
- *
- * Any transactions on the AHB are terminated as soon
- * as possible following the protocol. Any
- * transactions on the USB are terminated immediately.
- *
- * The configuration settings in the CSRs are
- * unchanged, so the software doesn't have to
- * reprogram these registers (Device
- * Configuration/Host Configuration/Core System
- * Configuration/Core PHY Configuration).
- *
- * The application can write to this bit, any time it
- * wants to reset the core. This is a self clearing
- * bit and the core clears this bit after all the
- * necessary logic is reset in the core, which may
- * take several clocks, depending on the current state
- * of the core.
- */
- unsigned csftrst : 1;
- } b;
-} grstctl_t;
-
-
-/**
- * This union represents the bit fields of the Core Interrupt Mask
- * Register (GINTMSK). Set/clear the bits using the bit fields then
- * write the <i>d32</i> value to the register.
- */
-typedef union gintmsk_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct
- {
- unsigned wkupintr : 1;
- unsigned sessreqintr : 1;
- unsigned disconnect : 1;
- unsigned conidstschng : 1;
- unsigned reserved27 : 1;
- unsigned ptxfempty : 1;
- unsigned hcintr : 1;
- unsigned portintr : 1;
- unsigned reserved22_23 : 2;
- unsigned incomplisoout : 1;
- unsigned incomplisoin : 1;
- unsigned outepintr : 1;
- unsigned inepintr : 1;
- unsigned epmismatch : 1;
- unsigned reserved16 : 1;
- unsigned eopframe : 1;
- unsigned isooutdrop : 1;
- unsigned enumdone : 1;
- unsigned usbreset : 1;
- unsigned usbsuspend : 1;
- unsigned erlysuspend : 1;
- unsigned i2cintr : 1;
- unsigned reserved8 : 1;
- unsigned goutnakeff : 1;
- unsigned ginnakeff : 1;
- unsigned nptxfempty : 1;
- unsigned rxstsqlvl : 1;
- unsigned sofintr : 1;
- unsigned otgintr : 1;
- unsigned modemismatch : 1;
- unsigned reserved0 : 1;
- } b;
-} gintmsk_data_t;
-/**
- * This union represents the bit fields of the Core Interrupt Register
- * (GINTSTS). Set/clear the bits using the bit fields then write the
- * <i>d32</i> value to the register.
- */
-typedef union gintsts_data
-{
- /** raw register data */
- uint32_t d32;
-#define DWC_SOF_INTR_MASK 0x0008
- /** register bits */
- struct
- {
-#define DWC_HOST_MODE 1
- unsigned wkupintr : 1;
- unsigned sessreqintr : 1;
- unsigned disconnect : 1;
- unsigned conidstschng : 1;
- unsigned reserved27 : 1;
- unsigned ptxfempty : 1;
- unsigned hcintr : 1;
- unsigned portintr : 1;
- unsigned reserved22_23 : 2;
- unsigned incomplisoout : 1;
- unsigned incomplisoin : 1;
- unsigned outepintr : 1;
- unsigned inepint: 1;
- unsigned epmismatch : 1;
- unsigned intokenrx : 1;
- unsigned eopframe : 1;
- unsigned isooutdrop : 1;
- unsigned enumdone : 1;
- unsigned usbreset : 1;
- unsigned usbsuspend : 1;
- unsigned erlysuspend : 1;
- unsigned i2cintr : 1;
- unsigned reserved8 : 1;
- unsigned goutnakeff : 1;
- unsigned ginnakeff : 1;
- unsigned nptxfempty : 1;
- unsigned rxstsqlvl : 1;
- unsigned sofintr : 1;
- unsigned otgintr : 1;
- unsigned modemismatch : 1;
- unsigned curmode : 1;
- } b;
-} gintsts_data_t;
-
-
-/**
- * This union represents the bit fields in the Device Receive Status Read and
- * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
- * element then read out the bits using the <i>b</i>it elements.
- */
-typedef union device_grxsts_data {
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved : 7;
- unsigned fn : 4;
-#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet
-#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete
-
-#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK
-#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
-#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet
- unsigned pktsts : 4;
- unsigned dpid : 2;
- unsigned bcnt : 11;
- unsigned epnum : 4;
- } b;
-} device_grxsts_data_t;
-
-/**
- * This union represents the bit fields in the Host Receive Status Read and
- * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
- * element then read out the bits using the <i>b</i>it elements.
- */
-typedef union host_grxsts_data {
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved31_21 : 11;
-#define DWC_GRXSTS_PKTSTS_IN 0x2
-#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3
-#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
-#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7
- unsigned pktsts : 4;
- unsigned dpid : 2;
- unsigned bcnt : 11;
- unsigned chnum : 4;
- } b;
-} host_grxsts_data_t;
-
-/**
- * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
- * GNPTXFSIZ, DPTXFSIZn). Read the register into the <i>d32</i> element then
- * read out the bits using the <i>b</i>it elements.
- */
-typedef union fifosize_data {
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned depth : 16;
- unsigned startaddr : 16;
- } b;
-} fifosize_data_t;
-
-/**
- * This union represents the bit fields in the Non-Periodic Transmit
- * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
- * <i>d32</i> element then read out the bits using the <i>b</i>it
- * elements.
- */
-typedef union gnptxsts_data {
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved : 1;
- /** Top of the Non-Periodic Transmit Request Queue
- * - bits 30:27 - Channel/EP Number
- * - bits 26:25 - Token Type
- * - bit 24 - Terminate (Last entry for the selected
- * channel/EP)
- * - 2'b00 - IN/OUT
- * - 2'b01 - Zero Length OUT
- * - 2'b10 - PING/Complete Split
- * - 2'b11 - Channel Halt
-
- */
- unsigned nptxqtop_chnep : 4;
- unsigned nptxqtop_token : 2;
- unsigned nptxqtop_terminate : 1;
- unsigned nptxqspcavail : 8;
- unsigned nptxfspcavail : 16;
- } b;
-} gnptxsts_data_t;
-
-/**
- * This union represents the bit fields in the Transmit
- * FIFO Status Register (DTXFSTS). Read the register into the
- * <i>d32</i> element then read out the bits using the <i>b</i>it
- * elements.
- */
-typedef union dtxfsts_data /* fscz */ //*
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved : 16;
- unsigned txfspcavail : 16;
- } b;
-} dtxfsts_data_t;
-
-/**
- * This union represents the bit fields in the I2C Control Register
- * (I2CCTL). Read the register into the <i>d32</i> element then read out the
- * bits using the <i>b</i>it elements.
- */
-typedef union gi2cctl_data {
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned bsydne : 1;
- unsigned rw : 1;
- unsigned reserved : 2;
- unsigned i2cdevaddr : 2;
- unsigned i2csuspctl : 1;
- unsigned ack : 1;
- unsigned i2cen : 1;
- unsigned addr : 7;
- unsigned regaddr : 8;
- unsigned rwdata : 8;
- } b;
-} gi2cctl_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config1
- * Register. Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg1_data {
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned ep_dir15 : 2;
- unsigned ep_dir14 : 2;
- unsigned ep_dir13 : 2;
- unsigned ep_dir12 : 2;
- unsigned ep_dir11 : 2;
- unsigned ep_dir10 : 2;
- unsigned ep_dir9 : 2;
- unsigned ep_dir8 : 2;
- unsigned ep_dir7 : 2;
- unsigned ep_dir6 : 2;
- unsigned ep_dir5 : 2;
- unsigned ep_dir4 : 2;
- unsigned ep_dir3 : 2;
- unsigned ep_dir2 : 2;
- unsigned ep_dir1 : 2;
- unsigned ep_dir0 : 2;
- } b;
-} hwcfg1_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config2
- * Register. Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg2_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- /* GHWCFG2 */
- unsigned reserved31 : 1;
- unsigned dev_token_q_depth : 5;
- unsigned host_perio_tx_q_depth : 2;
- unsigned nonperio_tx_q_depth : 2;
- unsigned rx_status_q_depth : 2;
- unsigned dynamic_fifo : 1;
- unsigned perio_ep_supported : 1;
- unsigned num_host_chan : 4;
- unsigned num_dev_ep : 4;
- unsigned fs_phy_type : 2;
-#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
-#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
-#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
-#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
- unsigned hs_phy_type : 2;
- unsigned point2point : 1;
- unsigned architecture : 2;
-#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
-#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
-#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
-#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
-#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
-#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
-#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
- unsigned op_mode : 3;
- } b;
-} hwcfg2_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config3
- * Register. Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg3_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- /* GHWCFG3 */
- unsigned dfifo_depth : 16;
- unsigned reserved15_13 : 3;
- unsigned ahb_phy_clock_synch : 1;
- unsigned synch_reset_type : 1;
- unsigned optional_features : 1;
- unsigned vendor_ctrl_if : 1;
- unsigned i2c : 1;
- unsigned otg_func : 1;
- unsigned packet_size_cntr_width : 3;
- unsigned xfer_size_cntr_width : 4;
- } b;
-} hwcfg3_data_t;
-
-/**
- * This union represents the bit fields in the User HW Config4
- * Register. Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg4_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
-unsigned reserved31_30 : 2; /* fscz */
- unsigned num_in_eps : 4;
- unsigned ded_fifo_en : 1;
-
- unsigned session_end_filt_en : 1;
- unsigned b_valid_filt_en : 1;
- unsigned a_valid_filt_en : 1;
- unsigned vbus_valid_filt_en : 1;
- unsigned iddig_filt_en : 1;
- unsigned num_dev_mode_ctrl_ep : 4;
- unsigned utmi_phy_data_width : 2;
- unsigned min_ahb_freq : 9;
- unsigned power_optimiz : 1;
- unsigned num_dev_perio_in_ep : 4;
- } b;
-} hwcfg4_data_t;
-
-////////////////////////////////////////////
-// Device Registers
-/**
- * Device Global Registers. <i>Offsets 800h-BFFh</i>
- *
- * The following structures define the size and relative field offsets
- * for the Device Mode Registers.
- *
- * <i>These registers are visible only in Device mode and must not be
- * accessed in Host mode, as the results are unknown.</i>
- */
-typedef struct dwc_otg_dev_global_regs
-{
- /** Device Configuration Register. <i>Offset 800h</i> */
- volatile uint32_t dcfg;
- /** Device Control Register. <i>Offset: 804h</i> */
- volatile uint32_t dctl;
- /** Device Status Register (Read Only). <i>Offset: 808h</i> */
- volatile uint32_t dsts;
- /** Reserved. <i>Offset: 80Ch</i> */
- uint32_t unused;
- /** Device IN Endpoint Common Interrupt Mask
- * Register. <i>Offset: 810h</i> */
- volatile uint32_t diepmsk;
- /** Device OUT Endpoint Common Interrupt Mask
- * Register. <i>Offset: 814h</i> */
- volatile uint32_t doepmsk;
- /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */
- volatile uint32_t daint;
- /** Device All Endpoints Interrupt Mask Register. <i>Offset:
- * 81Ch</i> */
- volatile uint32_t daintmsk;
- /** Device IN Token Queue Read Register-1 (Read Only).
- * <i>Offset: 820h</i> */
- volatile uint32_t dtknqr1;
- /** Device IN Token Queue Read Register-2 (Read Only).
- * <i>Offset: 824h</i> */
- volatile uint32_t dtknqr2;
- /** Device VBUS discharge Register. <i>Offset: 828h</i> */
- volatile uint32_t dvbusdis;
- /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */
- volatile uint32_t dvbuspulse;
- /** Device IN Token Queue Read Register-3 (Read Only).
- * Device Thresholding control register (Read/Write)
- * <i>Offset: 830h</i> */
- volatile uint32_t dtknqr3_dthrctl;
- /** Device IN Token Queue Read Register-4 (Read Only). /
- * Device IN EPs empty Inr. Mask Register (Read/Write)
- * <i>Offset: 834h</i> */
- volatile uint32_t dtknqr4_fifoemptymsk;
-} dwc_otg_device_global_regs_t;
-
-/**
- * This union represents the bit fields in the Device Configuration
- * Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements. Write the
- * <i>d32</i> member to the dcfg register.
- */
-typedef union dcfg_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved31_23 : 9;
- /** In Endpoint Mis-match count */
- unsigned epmscnt : 5;
- unsigned reserved13_17 : 5;
- /** Periodic Frame Interval */
-#define DWC_DCFG_FRAME_INTERVAL_80 0
-#define DWC_DCFG_FRAME_INTERVAL_85 1
-#define DWC_DCFG_FRAME_INTERVAL_90 2
-#define DWC_DCFG_FRAME_INTERVAL_95 3
- unsigned perfrint : 2;
- /** Device Addresses */
- unsigned devaddr : 7;
- unsigned reserved3 : 1;
- /** Non Zero Length Status OUT Handshake */
-#define DWC_DCFG_SEND_STALL 1
- unsigned nzstsouthshk : 1;
- /** Device Speed */
- unsigned devspd : 2;
- } b;
-} dcfg_data_t;
-
-/**
- * This union represents the bit fields in the Device Control
- * Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union dctl_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved : 20;
- /** Power-On Programming Done */
- unsigned pwronprgdone : 1;
- /** Clear Global OUT NAK */
- unsigned cgoutnak : 1;
- /** Set Global OUT NAK */
- unsigned sgoutnak : 1;
- /** Clear Global Non-Periodic IN NAK */
- unsigned cgnpinnak : 1;
- /** Set Global Non-Periodic IN NAK */
- unsigned sgnpinnak : 1;
- /** Test Control */
- unsigned tstctl : 3;
- /** Global OUT NAK Status */
- unsigned goutnaksts : 1;
- /** Global Non-Periodic IN NAK Status */
- unsigned gnpinnaksts : 1;
- /** Soft Disconnect */
- unsigned sftdiscon : 1;
- /** Remote Wakeup */
- unsigned rmtwkupsig : 1;
- } b;
-} dctl_data_t;
-
-/**
- * This union represents the bit fields in the Device Status
- * Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union dsts_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved22_31 : 10;
- /** Frame or Microframe Number of the received SOF */
- unsigned soffn : 14;
- unsigned reserved4_7: 4;
- /** Erratic Error */
- unsigned errticerr : 1;
- /** Enumerated Speed */
-#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
-#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
-#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2
-#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3
- unsigned enumspd : 2;
- /** Suspend Status */
- unsigned suspsts : 1;
- } b;
-} dsts_data_t;
-
-
-/**
- * This union represents the bit fields in the Device IN EP Interrupt
- * Register and the Device IN EP Common Mask Register.
- *
- * - Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements.
- */
-typedef union diepint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved07_31 : 23;
- unsigned txfifoundrn : 1;
- /** IN Endpoint HAK Effective mask */
- unsigned emptyintr : 1;
- /** IN Endpoint NAK Effective mask */
- unsigned inepnakeff : 1;
- /** IN Token Received with EP mismatch mask */
- unsigned intknepmis : 1;
- /** IN Token received with TxF Empty mask */
- unsigned intktxfemp : 1;
- /** TimeOUT Handshake mask (non-ISOC EPs) */
- unsigned timeout : 1;
- /** AHB Error mask */
- unsigned ahberr : 1;
- /** Endpoint disable mask */
- unsigned epdisabled : 1;
- /** Transfer complete mask */
- unsigned xfercompl : 1;
- } b;
-} diepint_data_t;
-/**
- * This union represents the bit fields in the Device IN EP Common
- * Interrupt Mask Register.
- */
-typedef union diepint_data diepmsk_data_t;
-
-/**
- * This union represents the bit fields in the Device OUT EP Interrupt
- * Registerand Device OUT EP Common Interrupt Mask Register.
- *
- * - Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements.
- */
-typedef union doepint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved04_31 : 27;
- /** OUT Token Received when Endpoint Disabled */
- unsigned outtknepdis : 1;
- /** Setup Phase Done (contorl EPs) */
- unsigned setup : 1;
- /** AHB Error */
- unsigned ahberr : 1;
- /** Endpoint disable */
- unsigned epdisabled : 1;
- /** Transfer complete */
- unsigned xfercompl : 1;
- } b;
-} doepint_data_t;
-/**
- * This union represents the bit fields in the Device OUT EP Common
- * Interrupt Mask Register.
- */
-typedef union doepint_data doepmsk_data_t;
-
-
-/**
- * This union represents the bit fields in the Device All EP Interrupt
- * and Mask Registers.
- * - Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements.
- */
-typedef union daint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- /** OUT Endpoint bits */
- unsigned out : 16;
- /** IN Endpoint bits */
- unsigned in : 16;
- } ep;
- struct {
- /** OUT Endpoint bits */
- unsigned outep15 : 1;
- unsigned outep14 : 1;
- unsigned outep13 : 1;
- unsigned outep12 : 1;
- unsigned outep11 : 1;
- unsigned outep10 : 1;
- unsigned outep9 : 1;
- unsigned outep8 : 1;
- unsigned outep7 : 1;
- unsigned outep6 : 1;
- unsigned outep5 : 1;
- unsigned outep4 : 1;
- unsigned outep3 : 1;
- unsigned outep2 : 1;
- unsigned outep1 : 1;
- unsigned outep0 : 1;
- /** IN Endpoint bits */
- unsigned inep15 : 1;
- unsigned inep14 : 1;
- unsigned inep13 : 1;
- unsigned inep12 : 1;
- unsigned inep11 : 1;
- unsigned inep10 : 1;
- unsigned inep9 : 1;
- unsigned inep8 : 1;
- unsigned inep7 : 1;
- unsigned inep6 : 1;
- unsigned inep5 : 1;
- unsigned inep4 : 1;
- unsigned inep3 : 1;
- unsigned inep2 : 1;
- unsigned inep1 : 1;
- unsigned inep0 : 1;
- } b;
-} daint_data_t;
-
-/**
- * This union represents the bit fields in the Device IN Token Queue
- * Read Registers.
- * - Read the register into the <i>d32</i> member.
- * - READ-ONLY Register
- */
-typedef union dtknq1_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- /** EP Numbers of IN Tokens 0 ... 4 */
- unsigned epnums0_5 : 24;
- /** write pointer has wrapped. */
- unsigned wrap_bit : 1;
- /** Reserved */
- unsigned reserved05_06 : 2;
- /** In Token Queue Write Pointer */
- unsigned intknwptr : 5;
- }b;
-} dtknq1_data_t;
-
-/**
- * This union represents Threshold control Register
- * - Read and write the register into the <i>d32</i> member.
- * - READ-WRITABLE Register
- */
-typedef union dthrctl_data //* /*fscz */
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- /** Reserved */
- unsigned reserved26_31 : 6;
- /** Rx Thr. Length */
- unsigned rx_thr_len : 9;
- /** Rx Thr. Enable */
- unsigned rx_thr_en : 1;
- /** Reserved */
- unsigned reserved11_15 : 5;
- /** Tx Thr. Length */
- unsigned tx_thr_len : 9;
- /** ISO Tx Thr. Enable */
- unsigned iso_thr_en : 1;
- /** non ISO Tx Thr. Enable */
- unsigned non_iso_thr_en : 1;
-
- }b;
-} dthrctl_data_t;
-
-/**
- * Device Logical IN Endpoint-Specific Registers. <i>Offsets
- * 900h-AFCh</i>
- *
- * There will be one set of endpoint registers per logical endpoint
- * implemented.
- *
- * <i>These registers are visible only in Device mode and must not be
- * accessed in Host mode, as the results are unknown.</i>
- */
-typedef struct dwc_otg_dev_in_ep_regs
-{
- /** Device IN Endpoint Control Register. <i>Offset:900h +
- * (ep_num * 20h) + 00h</i> */
- volatile uint32_t diepctl;
- /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
- uint32_t reserved04;
- /** Device IN Endpoint Interrupt Register. <i>Offset:900h +
- * (ep_num * 20h) + 08h</i> */
- volatile uint32_t diepint;
- /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
- uint32_t reserved0C;
- /** Device IN Endpoint Transfer Size
- * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
- volatile uint32_t dieptsiz;
- /** Device IN Endpoint DMA Address Register. <i>Offset:900h +
- * (ep_num * 20h) + 14h</i> */
- volatile uint32_t diepdma;
- /** Reserved. <i>Offset:900h + (ep_num * 20h) + 18h - 900h +
- * (ep_num * 20h) + 1Ch</i>*/
- volatile uint32_t dtxfsts;
- /** Reserved. <i>Offset:900h + (ep_num * 20h) + 1Ch - 900h +
- * (ep_num * 20h) + 1Ch</i>*/
- uint32_t reserved18;
-} dwc_otg_dev_in_ep_regs_t;
-
-/**
- * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
- * B00h-CFCh</i>
- *
- * There will be one set of endpoint registers per logical endpoint
- * implemented.
- *
- * <i>These registers are visible only in Device mode and must not be
- * accessed in Host mode, as the results are unknown.</i>
- */
-typedef struct dwc_otg_dev_out_ep_regs
-{
- /** Device OUT Endpoint Control Register. <i>Offset:B00h +
- * (ep_num * 20h) + 00h</i> */
- volatile uint32_t doepctl;
- /** Device OUT Endpoint Frame number Register. <i>Offset:
- * B00h + (ep_num * 20h) + 04h</i> */
- volatile uint32_t doepfn;
- /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
- * (ep_num * 20h) + 08h</i> */
- volatile uint32_t doepint;
- /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
- uint32_t reserved0C;
- /** Device OUT Endpoint Transfer Size Register. <i>Offset:
- * B00h + (ep_num * 20h) + 10h</i> */
- volatile uint32_t doeptsiz;
- /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
- * + (ep_num * 20h) + 14h</i> */
- volatile uint32_t doepdma;
- /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 18h - B00h +
- * (ep_num * 20h) + 1Ch</i> */
- uint32_t unused[2];
-} dwc_otg_dev_out_ep_regs_t;
-
-/**
- * This union represents the bit fields in the Device EP Control
- * Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union depctl_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- /** Endpoint Enable */
- unsigned epena : 1;
- /** Endpoint Disable */
- unsigned epdis : 1;
- /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
- * Writing to this field sets the Endpoint DPID (DPID)
- * field in this register to DATA1 Set Odd
- * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
- * Writing to this field sets the Even/Odd
- * (micro)frame (EO_FrNum) field to odd (micro) frame.
- */
- unsigned setd1pid : 1;
- /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
- * Writing to this field sets the Endpoint DPID (DPID)
- * field in this register to DATA0. Set Even
- * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
- * Writing to this field sets the Even/Odd
- * (micro)frame (EO_FrNum) field to even (micro)
- * frame.
- */
- unsigned setd0pid : 1;
- /** Set NAK */
- unsigned snak : 1;
- /** Clear NAK */
- unsigned cnak : 1;
- /** Tx Fifo Number
- * IN EPn/IN EP0
- * OUT EPn/OUT EP0 - reserved */
- unsigned txfnum : 4;
- /** Stall Handshake */
- unsigned stall : 1;
- /** Snoop Mode
- * OUT EPn/OUT EP0
- * IN EPn/IN EP0 - reserved */
- unsigned snp : 1;
- /** Endpoint Type
- * 2'b00: Control
- * 2'b01: Isochronous
- * 2'b10: Bulk
- * 2'b11: Interrupt */
- unsigned eptype : 2;
- /** NAK Status */
- unsigned naksts : 1;
- /** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
- * This field contains the PID of the packet going to
- * be received or transmitted on this endpoint. The
- * application should program the PID of the first
- * packet going to be received or transmitted on this
- * endpoint , after the endpoint is
- * activated. Application use the SetD1PID and
- * SetD0PID fields of this register to program either
- * D0 or D1 PID.
- *
- * The encoding for this field is
- * - 0: D0
- * - 1: D1
- */
- unsigned dpid : 1;
- /** USB Active Endpoint */
- unsigned usbactep : 1;
- /** Next Endpoint
- * IN EPn/IN EP0
- * OUT EPn/OUT EP0 - reserved */
- unsigned nextep : 4;
- /** Maximum Packet Size
- * IN/OUT EPn
- * IN/OUT EP0 - 2 bits
- * 2'b00: 64 Bytes
- * 2'b01: 32
- * 2'b10: 16
- * 2'b11: 8 */
-#define DWC_DEP0CTL_MPS_64 0
-#define DWC_DEP0CTL_MPS_32 1
-#define DWC_DEP0CTL_MPS_16 2
-#define DWC_DEP0CTL_MPS_8 3
- unsigned mps : 11;
- } b;
-} depctl_data_t;
-
-/**
- * This union represents the bit fields in the Device EP Transfer
- * Size Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union deptsiz_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved : 1;
- /** Multi Count - Periodic IN endpoints */
- unsigned mc : 2;
- /** Packet Count */
- unsigned pktcnt : 10;
- /** Transfer size */
- unsigned xfersize : 19;
- } b;
-} deptsiz_data_t;
-
-/**
- * This union represents the bit fields in the Device EP 0 Transfer
- * Size Register. Read the register into the <i>d32</i> member then
- * set/clear the bits using the <i>b</i>it elements.
- */
-typedef union deptsiz0_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved31 : 1;
- /**Setup Packet Count (DOEPTSIZ0 Only) */
- unsigned supcnt : 2;
- /** Reserved */
- unsigned reserved28_20 : 9;
- /** Packet Count */
- unsigned pktcnt : 1;
- /** Reserved */
- unsigned reserved18_7 : 12;
- /** Transfer size */
- unsigned xfersize : 7;
- } b;
-} deptsiz0_data_t;
-
-
-/** Maximum number of Periodic FIFOs */
-#define MAX_PERIO_FIFOS 15
-/** Maximum number of TX FIFOs */
-#define MAX_TX_FIFOS 15
-/** Maximum number of Endpoints/HostChannels */
-#define MAX_EPS_CHANNELS 16
-//#define MAX_EPS_CHANNELS 4
-
-/**
- * The dwc_otg_dev_if structure contains information needed to manage
- * the DWC_otg controller acting in device mode. It represents the
- * programming view of the device-specific aspects of the controller.
- */
-typedef struct dwc_otg_dev_if {
- /** Pointer to device Global registers.
- * Device Global Registers starting at offset 800h
- */
- dwc_otg_device_global_regs_t *dev_global_regs;
-#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
-
- /**
- * Device Logical IN Endpoint-Specific Registers 900h-AFCh
- */
- dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
-#define DWC_DEV_IN_EP_REG_OFFSET 0x900
-#define DWC_EP_REG_OFFSET 0x20
-
- /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
- dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
-#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
-
- /* Device configuration information*/
- uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */
- //uint8_t num_eps; /**< Number of EPs range: 0-16 (includes EP0) */
- //uint8_t num_perio_eps; /**< # of Periodic EP range: 0-15 */
- /*fscz */
- uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */
- uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/
-
- /** Size of periodic FIFOs (Bytes) */
- uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
-
- /** Size of Tx FIFOs (Bytes) */
- uint16_t tx_fifo_size[MAX_TX_FIFOS];
-
- /** Thresholding enable flags and length varaiables **/
- uint16_t rx_thr_en;
- uint16_t iso_tx_thr_en;
- uint16_t non_iso_tx_thr_en;
-
- uint16_t rx_thr_length;
- uint16_t tx_thr_length;
-} dwc_otg_dev_if_t;
-
-/**
- * This union represents the bit fields in the Power and Clock Gating Control
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements.
- */
-typedef union pcgcctl_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct {
- unsigned reserved31_05 : 27;
- /** PHY Suspended */
- unsigned physuspended : 1;
- /** Reset Power Down Modules */
- unsigned rstpdwnmodule : 1;
- /** Power Clamp */
- unsigned pwrclmp : 1;
- /** Gate Hclk */
- unsigned gatehclk : 1;
- /** Stop Pclk */
- unsigned stoppclk : 1;
- } b;
-} pcgcctl_data_t;
-
-/////////////////////////////////////////////////
-// Host Mode Register Structures
-//
-/**
- * The Host Global Registers structure defines the size and relative
- * field offsets for the Host Mode Global Registers. Host Global
- * Registers offsets 400h-7FFh.
-*/
-typedef struct dwc_otg_host_global_regs
-{
- /** Host Configuration Register. <i>Offset: 400h</i> */
- volatile uint32_t hcfg;
- /** Host Frame Interval Register. <i>Offset: 404h</i> */
- volatile uint32_t hfir;
- /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
- volatile uint32_t hfnum;
- /** Reserved. <i>Offset: 40Ch</i> */
- uint32_t reserved40C;
- /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
- volatile uint32_t hptxsts;
- /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
- volatile uint32_t haint;
- /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
- volatile uint32_t haintmsk;
-} dwc_otg_host_global_regs_t;
-
-/**
- * This union represents the bit fields in the Host Configuration Register.
- * Read the register into the <i>d32</i> member then set/clear the bits using
- * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
- */
-typedef union hcfg_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct {
- /** Reserved */
- //unsigned reserved31_03 : 29;
- /** FS/LS Only Support */
- unsigned fslssupp : 1;
- /** FS/LS Phy Clock Select */
-#define DWC_HCFG_30_60_MHZ 0
-#define DWC_HCFG_48_MHZ 1
-#define DWC_HCFG_6_MHZ 2
- unsigned fslspclksel : 2;
- } b;
-} hcfg_data_t;
-
-/**
- * This union represents the bit fields in the Host Frame Remaing/Number
- * Register.
- */
-typedef union hfir_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct {
- unsigned reserved : 16;
- unsigned frint : 16;
- } b;
-} hfir_data_t;
-
-/**
- * This union represents the bit fields in the Host Frame Remaing/Number
- * Register.
- */
-typedef union hfnum_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct {
- unsigned frrem : 16;
-#define DWC_HFNUM_MAX_FRNUM 0x3FFF
- unsigned frnum : 16;
- } b;
-} hfnum_data_t;
-
-typedef union hptxsts_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct {
- /** Top of the Periodic Transmit Request Queue
- * - bit 24 - Terminate (last entry for the selected channel)
- * - bits 26:25 - Token Type
- * - 2'b00 - Zero length
- * - 2'b01 - Ping
- * - 2'b10 - Disable
- * - bits 30:27 - Channel Number
- * - bit 31 - Odd/even microframe
- */
- unsigned ptxqtop_odd : 1;
- unsigned ptxqtop_chnum : 4;
- unsigned ptxqtop_token : 2;
- unsigned ptxqtop_terminate : 1;
- unsigned ptxqspcavail : 8;
- unsigned ptxfspcavail : 16;
- } b;
-} hptxsts_data_t;
-
-/**
- * This union represents the bit fields in the Host Port Control and Status
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hprt0 register.
- */
-typedef union hprt0_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved19_31 : 13;
-#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
-#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
-#define DWC_HPRT0_PRTSPD_LOW_SPEED 2
- unsigned prtspd : 2;
- unsigned prttstctl : 4;
- unsigned prtpwr : 1;
- unsigned prtlnsts : 2;
- unsigned reserved9 : 1;
- unsigned prtrst : 1;
- unsigned prtsusp : 1;
- unsigned prtres : 1;
- unsigned prtovrcurrchng : 1;
- unsigned prtovrcurract : 1;
- unsigned prtenchng : 1;
- unsigned prtena : 1;
- unsigned prtconndet : 1;
- unsigned prtconnsts : 1;
- } b;
-} hprt0_data_t;
-
-/**
- * This union represents the bit fields in the Host All Interrupt
- * Register.
- */
-typedef union haint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved : 16;
- unsigned ch15 : 1;
- unsigned ch14 : 1;
- unsigned ch13 : 1;
- unsigned ch12 : 1;
- unsigned ch11 : 1;
- unsigned ch10 : 1;
- unsigned ch9 : 1;
- unsigned ch8 : 1;
- unsigned ch7 : 1;
- unsigned ch6 : 1;
- unsigned ch5 : 1;
- unsigned ch4 : 1;
- unsigned ch3 : 1;
- unsigned ch2 : 1;
- unsigned ch1 : 1;
- unsigned ch0 : 1;
- } b;
- struct {
- unsigned reserved : 16;
- unsigned chint : 16;
- } b2;
-} haint_data_t;
-
-/**
- * This union represents the bit fields in the Host All Interrupt
- * Register.
- */
-typedef union haintmsk_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- unsigned reserved : 16;
- unsigned ch15 : 1;
- unsigned ch14 : 1;
- unsigned ch13 : 1;
- unsigned ch12 : 1;
- unsigned ch11 : 1;
- unsigned ch10 : 1;
- unsigned ch9 : 1;
- unsigned ch8 : 1;
- unsigned ch7 : 1;
- unsigned ch6 : 1;
- unsigned ch5 : 1;
- unsigned ch4 : 1;
- unsigned ch3 : 1;
- unsigned ch2 : 1;
- unsigned ch1 : 1;
- unsigned ch0 : 1;
- } b;
- struct {
- unsigned reserved : 16;
- unsigned chint : 16;
- } b2;
-} haintmsk_data_t;
-
-/**
- * Host Channel Specific Registers. <i>500h-5FCh</i>
- */
-typedef struct dwc_otg_hc_regs
-{
- /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
- volatile uint32_t hcchar;
- /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
- volatile uint32_t hcsplt;
- /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
- volatile uint32_t hcint;
- /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
- volatile uint32_t hcintmsk;
- /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
- volatile uint32_t hctsiz;
- /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
- volatile uint32_t hcdma;
- /** Reserved. <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
- uint32_t reserved[2];
-} dwc_otg_hc_regs_t;
-
-/**
- * This union represents the bit fields in the Host Channel Characteristics
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hcchar register.
- */
-typedef union hcchar_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct {
- /** Channel enable */
- unsigned chen : 1;
- /** Channel disable */
- unsigned chdis : 1;
- /**
- * Frame to transmit periodic transaction.
- * 0: even, 1: odd
- */
- unsigned oddfrm : 1;
- /** Device address */
- unsigned devaddr : 7;
- /** Packets per frame for periodic transfers. 0 is reserved. */
- unsigned multicnt : 2;
- /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
- unsigned eptype : 2;
- /** 0: Full/high speed device, 1: Low speed device */
- unsigned lspddev : 1;
- unsigned reserved : 1;
- /** 0: OUT, 1: IN */
- unsigned epdir : 1;
- /** Endpoint number */
- unsigned epnum : 4;
- /** Maximum packet size in bytes */
- unsigned mps : 11;
- } b;
-} hcchar_data_t;
-
-typedef union hcsplt_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct {
- /** Split Enble */
- unsigned spltena : 1;
- /** Reserved */
- unsigned reserved : 14;
- /** Do Complete Split */
- unsigned compsplt : 1;
- /** Transaction Position */
-#define DWC_HCSPLIT_XACTPOS_MID 0
-#define DWC_HCSPLIT_XACTPOS_END 1
-#define DWC_HCSPLIT_XACTPOS_BEGIN 2
-#define DWC_HCSPLIT_XACTPOS_ALL 3
- unsigned xactpos : 2;
- /** Hub Address */
- unsigned hubaddr : 7;
- /** Port Address */
- unsigned prtaddr : 7;
- } b;
-} hcsplt_data_t;
-
-
-/**
- * This union represents the bit fields in the Host All Interrupt
- * Register.
- */
-typedef union hcint_data
-{
- /** raw register data */
- uint32_t d32;
- /** register bits */
- struct {
- /** Reserved */
- unsigned reserved : 21;
- /** Data Toggle Error */
- unsigned datatglerr : 1;
- /** Frame Overrun */
- unsigned frmovrun : 1;
- /** Babble Error */
- unsigned bblerr : 1;
- /** Transaction Err */
- unsigned xacterr : 1;
- /** NYET Response Received */
- unsigned nyet : 1;
- /** ACK Response Received */
- unsigned ack : 1;
- /** NAK Response Received */
- unsigned nak : 1;
- /** STALL Response Received */
- unsigned stall : 1;
- /** AHB Error */
- unsigned ahberr : 1;
- /** Channel Halted */
- unsigned chhltd : 1;
- /** Transfer Complete */
- unsigned xfercomp : 1;
- } b;
-} hcint_data_t;
-
-/**
- * This union represents the bit fields in the Host Channel Transfer Size
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hcchar register.
- */
-typedef union hctsiz_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct {
- /** Do PING protocol when 1 */
- unsigned dopng : 1;
- /**
- * Packet ID for next data packet
- * 0: DATA0
- * 1: DATA2
- * 2: DATA1
- * 3: MDATA (non-Control), SETUP (Control)
- */
-#define DWC_HCTSIZ_DATA0 0
-#define DWC_HCTSIZ_DATA1 2
-#define DWC_HCTSIZ_DATA2 1
-#define DWC_HCTSIZ_MDATA 3
-#define DWC_HCTSIZ_SETUP 3
- unsigned pid : 2;
- /** Data packets to transfer */
- unsigned pktcnt : 10;
- /** Total transfer size in bytes */
- unsigned xfersize : 19;
- } b;
-} hctsiz_data_t;
-
-/**
- * This union represents the bit fields in the Host Channel Interrupt Mask
- * Register. Read the register into the <i>d32</i> member then set/clear the
- * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
- * hcintmsk register.
- */
-typedef union hcintmsk_data
-{
- /** raw register data */
- uint32_t d32;
-
- /** register bits */
- struct {
- unsigned reserved : 21;
- unsigned datatglerr : 1;
- unsigned frmovrun : 1;
- unsigned bblerr : 1;
- unsigned xacterr : 1;
- unsigned nyet : 1;
- unsigned ack : 1;
- unsigned nak : 1;
- unsigned stall : 1;
- unsigned ahberr : 1;
- unsigned chhltd : 1;
- unsigned xfercompl : 1;
- } b;
-} hcintmsk_data_t;
-
-/** OTG Host Interface Structure.
- *
- * The OTG Host Interface Structure structure contains information
- * needed to manage the DWC_otg controller acting in host mode. It
- * represents the programming view of the host-specific aspects of the
- * controller.
- */
-typedef struct dwc_otg_host_if {
- /** Host Global Registers starting at offset 400h.*/
- dwc_otg_host_global_regs_t *host_global_regs;
-#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
-
- /** Host Port 0 Control and Status Register */
- volatile uint32_t *hprt0;
-#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
-
-
- /** Host Channel Specific Registers at offsets 500h-5FCh. */
- dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
-#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
-#define DWC_OTG_CHAN_REGS_OFFSET 0x20
-
-
- /* Host configuration information */
- /** Number of Host Channels (range: 1-16) */
- uint8_t num_host_channels;
- /** Periodic EPs supported (0: no, 1: yes) */
- uint8_t perio_eps_supported;
- /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
- uint16_t perio_tx_fifo_size;
-
-} dwc_otg_host_if_t;
-
-#endif
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/Kconfig b/target/linux/lantiq/files/drivers/usb/ifxhcd/Kconfig
deleted file mode 100644
index 7eb8cebf42..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/Kconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-
-config USB_HOST_IFX
- tristate "Infineon USB Host Controller Driver"
- depends on USB
- default n
- help
- Infineon USB Host Controller
-
-config USB_HOST_IFX_B
- bool "USB host mode on core 1 and 2"
- depends on USB_HOST_IFX
- help
- Both cores run as host
-
-#config USB_HOST_IFX_1
-#config USB_HOST_IFX_2
-
-#config IFX_DANUBE
-#config IFX_AMAZON_SE
-config IFX_AR9
- depends on USB_HOST_IFX
- bool "AR9"
-
-config IFX_VR9
- depends on USB_HOST_IFX
- bool "VR9"
-
-#config USB_HOST_IFX_FORCE_USB11
-# bool "Forced USB1.1"
-# depends on USB_HOST_IFX
-# default n
-# help
-# force to be USB 1.1
-
-#config USB_HOST_IFX_WITH_HS_ELECT_TST
-# bool "With HS_Electrical Test"
-# depends on USB_HOST_IFX
-# default n
-# help
-# With USBIF HSET routines
-
-#config USB_HOST_IFX_WITH_ISO
-# bool "With ISO transfer"
-# depends on USB_HOST_IFX
-# default n
-# help
-# With USBIF ISO transfer
-
-config USB_HOST_IFX_UNALIGNED_ADJ
- bool "Adjust"
- depends on USB_HOST_IFX
- help
- USB_HOST_IFX_UNALIGNED_ADJ
-
-#config USB_HOST_IFX_UNALIGNED_CHK
-#config USB_HOST_IFX_UNALIGNED_NONE
-
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/Makefile b/target/linux/lantiq/files/drivers/usb/ifxhcd/Makefile
deleted file mode 100644
index 0a2ac99380..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/Makefile
+++ /dev/null
@@ -1,85 +0,0 @@
-
-#
-# Makefile for USB Core files and filesystem
-#
- ifxusb_host-objs := ifxusb_driver.o
- ifxusb_host-objs += ifxusb_ctl.o
- ifxusb_host-objs += ifxusb_cif.o
- ifxusb_host-objs += ifxusb_cif_h.o
- ifxusb_host-objs += ifxhcd.o
- ifxusb_host-objs += ifxhcd_es.o
- ifxusb_host-objs += ifxhcd_intr.o
- ifxusb_host-objs += ifxhcd_queue.o
-
-ifeq ($(CONFIG_IFX_TWINPASS),y)
- EXTRA_CFLAGS += -D__IS_TWINPASS__
-endif
-ifeq ($(CONFIG_IFX_DANUBE),y)
- EXTRA_CFLAGS += -D__IS_DANUBE__
-endif
-ifeq ($(CONFIG_IFX_AMAZON_SE),y)
- EXTRA_CFLAGS += -D__IS_AMAZON_SE__
-endif
-ifeq ($(CONFIG_IFX_AR9),y)
- EXTRA_CFLAGS += -D__IS_AR9__
-endif
-ifeq ($(CONFIG_IFX_AMAZON_S),y)
- EXTRA_CFLAGS += -D__IS_AR9__
-endif
-ifeq ($(CONFIG_IFX_VR9),y)
- EXTRA_CFLAGS += -D__IS_VR9__
-endif
-
-ifeq ($(CONFIG_USB_HOST_IFX),y)
- EXTRA_CFLAGS += -Dlinux -D__LINUX__
- EXTRA_CFLAGS += -D__IS_HOST__
- EXTRA_CFLAGS += -D__KERNEL__
-endif
-
-ifeq ($(CONFIG_USB_HOST_IFX),m)
- EXTRA_CFLAGS += -Dlinux -D__LINUX__
- EXTRA_CFLAGS += -D__IS_HOST__
- EXTRA_CFLAGS += -D__KERNEL__
-endif
-
-ifeq ($(CONFIG_USB_DEBUG),y)
- EXTRA_CFLAGS += -D__DEBUG__
- EXTRA_CFLAGS += -D__ENABLE_DUMP__
-endif
-
-ifeq ($(CONFIG_USB_HOST_IFX_B),y)
- EXTRA_CFLAGS += -D__IS_DUAL__
-endif
-ifeq ($(CONFIG_USB_HOST_IFX_1),y)
- EXTRA_CFLAGS += -D__IS_FIRST__
-endif
-ifeq ($(CONFIG_USB_HOST_IFX_2),y)
- EXTRA_CFLAGS += -D__IS_SECOND__
-endif
-
-ifeq ($(CONFIG_USB_HOST_IFX_FORCE_USB11),y)
- EXTRA_CFLAGS += -D__FORCE_USB11__
-endif
-ifeq ($(CONFIG_USB_HOST_IFX_WITH_HS_ELECT_TST),y)
- EXTRA_CFLAGS += -D__WITH_HS_ELECT_TST__
-endif
-ifeq ($(CONFIG_USB_HOST_IFX_WITH_ISO),y)
- EXTRA_CFLAGS += -D__EN_ISOC__
-endif
-ifeq ($(CONFIG_USB_HOST_IFX_UNALIGNED_ADJ),y)
- EXTRA_CFLAGS += -D__UNALIGNED_BUFFER_ADJ__
-endif
-ifeq ($(CONFIG_USB_HOST_IFX_UNALIGNED_CHK),y)
- EXTRA_CFLAGS += -D__UNALIGNED_BUFFER_CHK__
-endif
-
-# EXTRA_CFLAGS += -D__DYN_SOF_INTR__
- EXTRA_CFLAGS += -D__UEIP__
-# EXTRA_CFLAGS += -D__EN_ISOC__
-# EXTRA_CFLAGS += -D__EN_ISOC_SPLIT__
-
-## 20110628 AVM/WK New flag for less SOF IRQs
- EXTRA_CFLAGS += -D__USE_TIMER_4_SOF__
-
-obj-$(CONFIG_USB_HOST_IFX) += ifxusb_host.o
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/TagHistory b/target/linux/lantiq/files/drivers/usb/ifxhcd/TagHistory
deleted file mode 100644
index 3820d70b7a..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/TagHistory
+++ /dev/null
@@ -1,171 +0,0 @@
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://embeddedvm/home/SVN/drivers/usb_host20/tags/5.18-r240-non_musb_ar9_vr9-SOF_Timer_Fixed
-| Erzeugt mit SVN-Tagger Version 3.74.
-+----------------------------------------------------------------------+
-FIX - Korrektur bei der SOF-Timer/IRQ Steuerung. (Bug in Tag 5.17)
-FIX - Fehlerbehandlung an mehreren Stellen korrigiert bzw. eingebaut.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://embeddedvm/home/SVN/drivers/usb_host20/tags/5.17-r237-non_musb_ar9_vr9-2_6_32_41_Kompatibel
-| Erzeugt mit SVN-Tagger Version 3.73.
-+----------------------------------------------------------------------+
-FIX - Kompatiblität zum Update auf Kernel 2.6.32-41. Weiterhin für 28er geeignet.
-ENH - Reduktion der Interrruptlast durch Nutzung eines hrtimers anstatt SOF-IRQ.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.16-r208-non_musb_ar9_vr9-20110421_Zero_Paket_Optimiert
-| Erzeugt mit SVN-Tagger Version 3.66.
-+----------------------------------------------------------------------+
-
-FIX - VR9 / AR9 - Zero Packet. Optimierung korrigiert.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.15-r205-non_musb_ar9_vr9-20110421_Zero_Paket_WA_funktioniert
-| Erzeugt mit SVN-Tagger Version 3.66.
-+----------------------------------------------------------------------+
-
-FIX - VR9 / AR9 - "Zero Packet" funktioniert nun wirklich. Letzter Tag hatte einen Bug.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.14-r202-non_musb_ar9_vr9-20110420_Zero_Paket_WA
-| Erzeugt mit SVN-Tagger Version 3.66.
-+----------------------------------------------------------------------+
-
-FIX - VR9 / AR9 - Zero Packet Workaround: ZLP wird nun geschickt wenn URB_ZERO_PACKET aktiv ist.
- Wird von LTE Altair Firmware benoetig.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.13-r199-non_musb_ar9_vr9-20110310_Init_Fix
-| Erzeugt mit SVN-Tagger Version 3.64.
-+----------------------------------------------------------------------+
-
-FIX - VR9 / AR9 - Timing der Initialisierungsphase angepasst zum Kernel 2.6.28 mit UGW-4.3.1.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.12-r184-non_musb_ar9_vr9-20110118_Full_Speed_Fix
-| Erzeugt mit SVN-Tagger Version 3.58.
-+----------------------------------------------------------------------+
-AR9/VR9 (3370,6840,7320):
-Makefile - FIX - (Workaround) Debug Modus hilft gegen Enumerationsfehler bei Full Speed Drucker.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.11-r175-non_musb_ar9_vr9-20101220_VR9_2_Ports_DMA_Fix
-| Erzeugt mit SVN-Tagger Version 3.58.
-+----------------------------------------------------------------------+
-
-FIX - VR9 - Workaround DMA Burst Size. Wenn beiden USB Ports benutzt werden, geht der USB Host nicht mehr.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.10-r169-non_musb_ar9_vr9-Fix_Spontan_Reboot
-| Erzeugt mit SVN-Tagger Version 3.58.
-+----------------------------------------------------------------------+
-
-FIX - Endlosschleife führte zu einem spontanen Reboot.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.9-r166-non_musb_ar9_vr9-20101112_deferred_completion
-| Erzeugt mit SVN-Tagger Version 3.58.
-+----------------------------------------------------------------------+
-
-ENH - Deferred URB Completion Mechanismus eingebaut. Nun ca. 10% schneller bei usb-storage.
-
-FIX - PING Flow Control gefixt.
-FIX - Channel Halt wird nun immer angerufen. (Split Transaction wurde nicht erfolgreich gestoppt).
-FIX - Spinlock Benutzung verbessert. Mehr Stabilitaet.
-
-CHG - Ubersetztungsoption __DEBUG__ ist nun abhaengig von CONFIG_USB_DEBUG
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.8-r149-non_musb_ar9_vr9-20100827_LTE_Interrupt_EP_Fix
-| Erzeugt mit SVN-Tagger Version 3.57.
-+----------------------------------------------------------------------+
-AR9/VR9 - FIX - Interrupt Packets gingen verloren, wegen falschem Timing beim OddFrame Bit.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.7-r142-non_musb_ar9_vr9-20100728_Unaligned_Buf_Fix
-| Erzeugt mit SVN-Tagger Version 3.57.
-+----------------------------------------------------------------------+
-FIX - "Unaligned Data" Flag wieder nach Transfer geloescht.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.6-r133-non_musb_ar9_vr9-20100714_Toggle_Datenverlust_Fix
-| Erzeugt mit SVN-Tagger Version 3.57.
-+----------------------------------------------------------------------+
-TL5508 - Einige UMTS Modems funktionierten nicht korrekt an der 7320 (AR9).
-FIX - USB Data Toggle des usbcore benutzen. Datenverlust nach EP-Halt.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.5-r130-non_musb_ar9_vr9-20100712_USB_Ports_abschaltbar
-| Erzeugt mit SVN-Tagger Version 3.57.
-+----------------------------------------------------------------------+
-Power - Fix - Beide USB Port abschaltbar bei rmmod.
-rmmod - FIX - URB_Dequeue funktionierte beim Entladen des Treibers nicht (mehrere Ursachen).
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.4-r126-non_musb_ar9_vr9-20100701_Lost_Interrupt_Workaround
-| Erzeugt mit SVN-Tagger Version 3.57.
-+----------------------------------------------------------------------+
-FIX - Workaround wegen verpasstem Interrupt, bei Full-Speed Interrupt EP.
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.3-r123-non_musb_ar9_vr9-20100630_UMTS_Fixes
-| Erzeugt mit SVN-Tagger Version 3.57.
-+----------------------------------------------------------------------+
-FIX - Full-Speed Interrupt Endpoint hinter Hi-Speed Hub funktioniert nun (UMTS Modems)
-FIX - usb_hcd_link_urb_from_ep API von USBCore muss benutzt werden.
-FIX - Interrupt URBs nicht bei NAK completen.
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.2-r114-non_musb_ar9_vr9-20100520_StickAndSurf_funktioniert
-| Erzeugt mit SVN-Tagger Version 3.56.
-+----------------------------------------------------------------------+
-- Merge mit neuen LANTIQ Sourcen "3.0alpha B100312"
-- Fix - Spin_lock eingebaut, Stick&Surf funktioniert nun
-
-- DEP - CONFIG_USB_HOST_IFX_WITH_ISO wird nicht unterstuetzt: In der Kernel Config deaktivieren.
-
-
-
-+----------------------------------------------------------------------+
-| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.1-r107-non_musb_ar9_vr9-20100505_IFXUSB_Host_mit_Energiemonitor
-| Erzeugt mit SVN-Tagger Version 3.56.
-+----------------------------------------------------------------------+
-USB Host Treiber für AR9 und VR9
---------------------------------
-FIX - Toggle Error nach STALL - Einfacher Workaround - Nun werden Massenspeicherpartitionen erkannt!
-AVM_POWERMETER - USB Energiemonitor Support.
-
-Bekanntes Problem: Stick and Surf funktioniert nur sporadisch, weil CONTROL_IRQ manchmal ausbleibt.
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd.c b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd.c
deleted file mode 100644
index d2ae1250bb..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd.c
+++ /dev/null
@@ -1,2523 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxhcd.c
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : This file contains the structures, constants, and interfaces for
- ** the Host Contoller Driver (HCD).
- **
- ** The Host Controller Driver (HCD) is responsible for translating requests
- ** from the USB Driver into the appropriate actions on the IFXUSB controller.
- ** It isolates the USBD from the specifics of the controller by providing an
- ** API to the USBD.
- *****************************************************************************/
-
-/*!
- \file ifxhcd.c
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the implementation of the HCD. In Linux,
- the HCD implements the hc_driver API.
-*/
-
-#include <linux/version.h>
-#include "ifxusb_version.h"
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-
-#include <linux/device.h>
-
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-
-#include <linux/dma-mapping.h>
-
-
-#include "ifxusb_plat.h"
-#include "ifxusb_regs.h"
-#include "ifxusb_cif.h"
-#include "ifxhcd.h"
-
-#include <asm/irq.h>
-
-#ifdef CONFIG_AVM_POWERMETER
-#include <linux/avm_power.h>
-#endif /*--- #ifdef CONFIG_AVM_POWERMETER ---*/
-
-#ifdef __DEBUG__
- static void dump_urb_info(struct urb *_urb, char* _fn_name);
- static void dump_channel_info(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-#endif
-
-
-/*!
- \brief Sets the final status of an URB and returns it to the device driver. Any
- required cleanup of the URB is performed.
- */
-void ifxhcd_complete_urb(ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status)
-{
- struct urb *urb=NULL;
- unsigned long flags = 0;
-
- /*== AVM/BC 20101111 Function called with Lock ==*/
- //SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-
- if (!list_empty(&_urbd->urbd_list_entry))
- list_del_init (&_urbd->urbd_list_entry);
-
- if(!_urbd->urb)
- {
- IFX_ERROR("%s: invalid urb\n",__func__);
- /*== AVM/BC 20101111 Function called with Lock ==*/
- //SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
- return;
- }
-
- urb=_urbd->urb;
-
- #ifdef __DEBUG__
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
- {
- IFX_PRINT("%s: _urbd %p, urb %p, device %d, ep %d %s/%s, status=%d\n",
- __func__, _urbd,_urbd->urb, usb_pipedevice(_urbd->urb->pipe),
- usb_pipeendpoint(_urbd->urb->pipe),
- usb_pipein(_urbd->urb->pipe) ? "IN" : "OUT",
- (_urbd->is_in) ? "IN" : "OUT",
- _status);
- if (_urbd->epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
- {
- int i;
- for (i = 0; i < _urbd->urb->number_of_packets; i++)
- IFX_PRINT(" ISO Desc %d status: %d\n", i, _urbd->urb->iso_frame_desc[i].status);
- }
- }
- #endif
-
- if (!_urbd->epqh)
- IFX_ERROR("%s: invalid epqd\n",__func__);
-
- #if defined(__UNALIGNED_BUFFER_ADJ__)
- else if(_urbd->is_active)
- {
- if( _urbd->epqh->aligned_checked &&
- _urbd->epqh->using_aligned_buf &&
- _urbd->xfer_buff &&
- _urbd->is_in )
- memcpy(_urbd->xfer_buff,_urbd->epqh->aligned_buf,_urbd->xfer_len);
- _urbd->epqh->using_aligned_buf=0;
- _urbd->epqh->using_aligned_setup=0;
- _urbd->epqh->aligned_checked=0;
- }
- #endif
-
- urb->status = _status;
- urb->hcpriv=NULL;
- kfree(_urbd);
-
- usb_hcd_unlink_urb_from_ep(ifxhcd_to_syshcd(_ifxhcd), urb);
- SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-
-// usb_hcd_giveback_urb(ifxhcd_to_syshcd(_ifxhcd), urb);
- usb_hcd_giveback_urb(ifxhcd_to_syshcd(_ifxhcd), urb, _status);
-
- /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
- SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-}
-
-/*== AVM/BC 20101111 URB Complete deferred
- * Must be called with Spinlock
- */
-
-/*!
- \brief Inserts an urbd structur in the completion list. The urbd will be
- later completed by select_eps_sub
- */
-void defer_ifxhcd_complete_urb(ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status)
-{
-
- _urbd->status = _status;
-
- //Unlink Urbd from epqh / Insert it into the complete list
- list_move_tail(&_urbd->urbd_list_entry, &_ifxhcd->urbd_complete_list);
-
-}
-
-/*!
- \brief Processes all the URBs in a single EPQHs. Completes them with
- status and frees the URBD.
- */
-//static
-void kill_all_urbs_in_epqh(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh, int _status)
-{
- struct list_head *urbd_item;
- ifxhcd_urbd_t *urbd;
-
- if(!_epqh)
- return;
-
- for (urbd_item = _epqh->urbd_list.next;
- urbd_item != &_epqh->urbd_list;
- urbd_item = _epqh->urbd_list.next)
- {
- urbd = list_entry(urbd_item, ifxhcd_urbd_t, urbd_list_entry);
- ifxhcd_complete_urb(_ifxhcd, urbd, _status);
- }
-}
-
-
-/*!
- \brief Free all EPS in one Processes all the URBs in a single list of EPQHs. Completes them with
- -ETIMEDOUT and frees the URBD.
- */
-//static
-void epqh_list_free(ifxhcd_hcd_t *_ifxhcd, struct list_head *_epqh_list)
-{
- struct list_head *item;
- ifxhcd_epqh_t *epqh;
-
- if (!_epqh_list)
- return;
- if (_epqh_list->next == NULL) /* The list hasn't been initialized yet. */
- return;
-
- /* Ensure there are no URBDs or URBs left. */
- for (item = _epqh_list->next; item != _epqh_list; item = _epqh_list->next)
- {
- epqh = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
- kill_all_urbs_in_epqh(_ifxhcd, epqh, -ETIMEDOUT);
- ifxhcd_epqh_free(epqh);
- }
-}
-
-
-
-//static
-void epqh_list_free_all(ifxhcd_hcd_t *_ifxhcd)
-{
- unsigned long flags;
-
- /*== AVM/BC 20101111 - 2.6.28 Needs Spinlock ==*/
- SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-
- epqh_list_free(_ifxhcd, &_ifxhcd->epqh_np_active );
- epqh_list_free(_ifxhcd, &_ifxhcd->epqh_np_ready );
- epqh_list_free(_ifxhcd, &_ifxhcd->epqh_intr_active );
- epqh_list_free(_ifxhcd, &_ifxhcd->epqh_intr_ready );
- #ifdef __EN_ISOC__
- epqh_list_free(_ifxhcd, &_ifxhcd->epqh_isoc_active );
- epqh_list_free(_ifxhcd, &_ifxhcd->epqh_isoc_ready );
- #endif
- epqh_list_free(_ifxhcd, &_ifxhcd->epqh_stdby );
-
- SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-
-}
-
-
-/*!
- \brief This function is called to handle the disconnection of host port.
- */
-int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd)
-{
- IFX_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _ifxhcd);
-
- /* Set status flags for the hub driver. */
- _ifxhcd->flags.b.port_connect_status_change = 1;
- _ifxhcd->flags.b.port_connect_status = 0;
-
- /*
- * Shutdown any transfers in process by clearing the Tx FIFO Empty
- * interrupt mask and status bits and disabling subsequent host
- * channel interrupts.
- */
- {
- gint_data_t intr = { .d32 = 0 };
- intr.b.nptxfempty = 1;
- intr.b.ptxfempty = 1;
- intr.b.hcintr = 1;
- ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gintmsk, intr.d32, 0);
- ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gintsts, intr.d32, 0);
- }
-
- /* Respond with an error status to all URBs in the schedule. */
- epqh_list_free_all(_ifxhcd);
-
- /* Clean up any host channels that were in use. */
- {
- int num_channels;
- ifxhcd_hc_t *channel;
- ifxusb_hc_regs_t *hc_regs;
- hcchar_data_t hcchar;
- int i;
-
- num_channels = _ifxhcd->core_if.params.host_channels;
-
- for (i = 0; i < num_channels; i++)
- {
- channel = &_ifxhcd->ifxhc[i];
- if (list_empty(&channel->hc_list_entry))
- {
- hc_regs = _ifxhcd->core_if.hc_regs[i];
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- if (hcchar.b.chen)
- {
- /* Halt the channel. */
- hcchar.b.chdis = 1;
- ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
- }
- list_add_tail(&channel->hc_list_entry, &_ifxhcd->free_hc_list);
- ifxhcd_hc_cleanup(&_ifxhcd->core_if, channel);
- }
- }
- }
- return 1;
-}
-
-
-/*!
- \brief Frees secondary storage associated with the ifxhcd_hcd structure contained
- in the struct usb_hcd field.
- */
-static void ifxhcd_freeextra(struct usb_hcd *_syshcd)
-{
- ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
-
- IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD FREE\n");
-
- /* Free memory for EPQH/URBD lists */
- epqh_list_free_all(ifxhcd);
-
- /* Free memory for the host channels. */
- ifxusb_free_buf(ifxhcd->status_buf);
- return;
-}
-#ifdef __USE_TIMER_4_SOF__
-static enum hrtimer_restart ifxhcd_timer_func(struct hrtimer *timer) {
- ifxhcd_hcd_t *ifxhcd = container_of(timer, ifxhcd_hcd_t, hr_timer);
-
- ifxhcd_handle_intr(ifxhcd);
-
- return HRTIMER_NORESTART;
-}
-#endif
-
-/*!
- \brief Initializes the HCD. This function allocates memory for and initializes the
- static parts of the usb_hcd and ifxhcd_hcd structures. It also registers the
- USB bus with the core and calls the hc_driver->start() function. It returns
- a negative error on failure.
- */
-int ifxhcd_init(ifxhcd_hcd_t *_ifxhcd)
-{
- int retval = 0;
- struct usb_hcd *syshcd = NULL;
-
- IFX_DEBUGPL(DBG_HCD, "IFX USB HCD INIT\n");
-
- spin_lock_init(&_ifxhcd->lock);
-#ifdef __USE_TIMER_4_SOF__
- hrtimer_init(&_ifxhcd->hr_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- _ifxhcd->hr_timer.function = ifxhcd_timer_func;
-#endif
- _ifxhcd->hc_driver.description = _ifxhcd->core_if.core_name;
- _ifxhcd->hc_driver.product_desc = "IFX USB Controller";
- //_ifxhcd->hc_driver.hcd_priv_size = sizeof(ifxhcd_hcd_t);
- _ifxhcd->hc_driver.hcd_priv_size = sizeof(unsigned long);
- _ifxhcd->hc_driver.irq = ifxhcd_irq;
- _ifxhcd->hc_driver.flags = HCD_MEMORY | HCD_USB2;
- _ifxhcd->hc_driver.start = ifxhcd_start;
- _ifxhcd->hc_driver.stop = ifxhcd_stop;
- //_ifxhcd->hc_driver.reset =
- //_ifxhcd->hc_driver.suspend =
- //_ifxhcd->hc_driver.resume =
- _ifxhcd->hc_driver.urb_enqueue = ifxhcd_urb_enqueue;
- _ifxhcd->hc_driver.urb_dequeue = ifxhcd_urb_dequeue;
- _ifxhcd->hc_driver.endpoint_disable = ifxhcd_endpoint_disable;
- _ifxhcd->hc_driver.get_frame_number = ifxhcd_get_frame_number;
- _ifxhcd->hc_driver.hub_status_data = ifxhcd_hub_status_data;
- _ifxhcd->hc_driver.hub_control = ifxhcd_hub_control;
- //_ifxhcd->hc_driver.hub_suspend =
- //_ifxhcd->hc_driver.hub_resume =
-
- /* Allocate memory for and initialize the base HCD and */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
- syshcd = usb_create_hcd(&_ifxhcd->hc_driver, _ifxhcd->dev, _ifxhcd->core_if.core_name);
-#else
- syshcd = usb_create_hcd(&_ifxhcd->hc_driver, _ifxhcd->dev, _ifxhcd->dev->bus_id);
-#endif
-
- if (syshcd == NULL)
- {
- retval = -ENOMEM;
- goto error1;
- }
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
- syshcd->has_tt = 1;
-#endif
-
- syshcd->rsrc_start = (unsigned long)_ifxhcd->core_if.core_global_regs;
- syshcd->regs = (void *)_ifxhcd->core_if.core_global_regs;
- syshcd->self.otg_port = 0;
-
- //*((unsigned long *)(&(syshcd->hcd_priv)))=(unsigned long)_ifxhcd;
- //*((unsigned long *)(&(syshcd->hcd_priv[0])))=(unsigned long)_ifxhcd;
- syshcd->hcd_priv[0]=(unsigned long)_ifxhcd;
- _ifxhcd->syshcd=syshcd;
-
- INIT_LIST_HEAD(&_ifxhcd->epqh_np_active );
- INIT_LIST_HEAD(&_ifxhcd->epqh_np_ready );
- INIT_LIST_HEAD(&_ifxhcd->epqh_intr_active );
- INIT_LIST_HEAD(&_ifxhcd->epqh_intr_ready );
- #ifdef __EN_ISOC__
- INIT_LIST_HEAD(&_ifxhcd->epqh_isoc_active );
- INIT_LIST_HEAD(&_ifxhcd->epqh_isoc_ready );
- #endif
- INIT_LIST_HEAD(&_ifxhcd->epqh_stdby );
- INIT_LIST_HEAD(&_ifxhcd->urbd_complete_list);
-
- /*
- * Create a host channel descriptor for each host channel implemented
- * in the controller. Initialize the channel descriptor array.
- */
- INIT_LIST_HEAD(&_ifxhcd->free_hc_list);
- {
- int num_channels = _ifxhcd->core_if.params.host_channels;
- int i;
- for (i = 0; i < num_channels; i++)
- {
- _ifxhcd->ifxhc[i].hc_num = i;
- IFX_DEBUGPL(DBG_HCDV, "HCD Added channel #%d\n", i);
- }
- }
-
- /* Set device flags indicating whether the HCD supports DMA. */
- if(_ifxhcd->dev->dma_mask)
- *(_ifxhcd->dev->dma_mask) = ~0;
- _ifxhcd->dev->coherent_dma_mask = ~0;
-
- /*
- * Finish generic HCD initialization and start the HCD. This function
- * allocates the DMA buffer pool, registers the USB bus, requests the
- * IRQ line, and calls ifxusb_hcd_start method.
- */
-// retval = usb_add_hcd(syshcd, _ifxhcd->core_if.irq, SA_INTERRUPT|SA_SHIRQ);
- retval = usb_add_hcd(syshcd, _ifxhcd->core_if.irq, IRQF_DISABLED | IRQF_SHARED );
- if (retval < 0)
- goto error2;
-
- /*
- * Allocate space for storing data on status transactions. Normally no
- * data is sent, but this space acts as a bit bucket. This must be
- * done after usb_add_hcd since that function allocates the DMA buffer
- * pool.
- */
- _ifxhcd->status_buf = ifxusb_alloc_buf(IFXHCD_STATUS_BUF_SIZE, 1);
-
- if (_ifxhcd->status_buf)
- {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
- IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Initialized, bus=%s, usbbus=%d\n", _ifxhcd->core_if.core_name, syshcd->self.busnum);
-#else
- IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Initialized, bus=%s, usbbus=%d\n", _ifxhcd->dev->bus_id, syshcd->self.busnum);
-#endif
- return 0;
- }
- IFX_ERROR("%s: status_buf allocation failed\n", __func__);
-
- /* Error conditions */
- usb_remove_hcd(syshcd);
-error2:
- ifxhcd_freeextra(syshcd);
- usb_put_hcd(syshcd);
-error1:
- return retval;
-}
-
-/*!
- \brief Removes the HCD.
- Frees memory and resources associated with the HCD and deregisters the bus.
- */
-void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd)
-{
- struct usb_hcd *syshcd = ifxhcd_to_syshcd(_ifxhcd);
-
- IFX_DEBUGPL(DBG_HCD, "IFX USB HCD REMOVE\n");
-
-/* == AVM/WK 20100709 - Fix: Order changed, disable IRQs not before remove_hcd == */
-
- usb_remove_hcd(syshcd);
-
- /* Turn off all interrupts */
- ifxusb_wreg (&_ifxhcd->core_if.core_global_regs->gintmsk, 0);
- ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gahbcfg, 1, 0);
-
- ifxhcd_freeextra(syshcd);
-
- usb_put_hcd(syshcd);
-
- return;
-}
-
-
-/* =========================================================================
- * Linux HC Driver Functions
- * ========================================================================= */
-
-/*!
- \brief Initializes the IFXUSB controller and its root hub and prepares it for host
- mode operation. Activates the root port. Returns 0 on success and a negative
- error code on failure.
- Called by USB stack.
- */
-int ifxhcd_start(struct usb_hcd *_syshcd)
-{
- ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
- ifxusb_core_if_t *core_if = &ifxhcd->core_if;
- struct usb_bus *bus;
-
- IFX_DEBUGPL(DBG_HCD, "IFX USB HCD START\n");
-
- bus = hcd_to_bus(_syshcd);
-
- /* Initialize the bus state. */
- _syshcd->state = HC_STATE_RUNNING;
-
- /* Initialize and connect root hub if one is not already attached */
- if (bus->root_hub)
- {
- IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Has Root Hub\n");
- /* Inform the HUB driver to resume. */
- usb_hcd_resume_root_hub(_syshcd);
- }
-
- ifxhcd->flags.d32 = 0;
-
- /* Put all channels in the free channel list and clean up channel states.*/
- {
- struct list_head *item;
- item = ifxhcd->free_hc_list.next;
- while (item != &ifxhcd->free_hc_list)
- {
- list_del(item);
- item = ifxhcd->free_hc_list.next;
- }
- }
- {
- int num_channels = ifxhcd->core_if.params.host_channels;
- int i;
- for (i = 0; i < num_channels; i++)
- {
- ifxhcd_hc_t *channel;
- channel = &ifxhcd->ifxhc[i];
- list_add_tail(&channel->hc_list_entry, &ifxhcd->free_hc_list);
- ifxhcd_hc_cleanup(&ifxhcd->core_if, channel);
- }
- }
- /* Initialize the USB core for host mode operation. */
-
- ifxusb_host_enable_interrupts(core_if);
- ifxusb_enable_global_interrupts(core_if);
- ifxusb_phy_power_on (core_if);
-
- ifxusb_vbus_init(core_if);
-
- /* Turn on the vbus power. */
- {
- hprt0_data_t hprt0;
- hprt0.d32 = ifxusb_read_hprt0(core_if);
-
- IFX_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
- if (hprt0.b.prtpwr == 0 )
- {
- hprt0.b.prtpwr = 1;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- ifxusb_vbus_on(core_if);
- }
- }
- return 0;
-}
-
-
-/*!
- \brief Halts the IFXUSB host mode operations in a clean manner. USB transfers are
- stopped.
- */
-void ifxhcd_stop(struct usb_hcd *_syshcd)
-{
- ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
- hprt0_data_t hprt0 = { .d32=0 };
-
- IFX_DEBUGPL(DBG_HCD, "IFX USB HCD STOP\n");
-
- /* Turn off all interrupts. */
- ifxusb_disable_global_interrupts(&ifxhcd->core_if );
- ifxusb_host_disable_interrupts(&ifxhcd->core_if );
-#ifdef __USE_TIMER_4_SOF__
- hrtimer_cancel(&ifxhcd->hr_timer);
-#endif
- /*
- * The root hub should be disconnected before this function is called.
- * The disconnect will clear the URBD lists (via ..._hcd_urb_dequeue)
- * and the EPQH lists (via ..._hcd_endpoint_disable).
- */
-
- /* Turn off the vbus power */
- IFX_PRINT("PortPower off\n");
-
- ifxusb_vbus_off(&ifxhcd->core_if );
-
- ifxusb_vbus_free(&ifxhcd->core_if );
-
- hprt0.b.prtpwr = 0;
- ifxusb_wreg(ifxhcd->core_if.hprt0, hprt0.d32);
- return;
-}
-
-/*!
- \brief Returns the current frame number
- */
-int ifxhcd_get_frame_number(struct usb_hcd *_syshcd)
-{
- ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
- hfnum_data_t hfnum;
-
- hfnum.d32 = ifxusb_rreg(&ifxhcd->core_if.host_global_regs->hfnum);
-
- return hfnum.b.frnum;
-}
-
-/*!
- \brief Starts processing a USB transfer request specified by a USB Request Block
- (URB). mem_flags indicates the type of memory allocation to use while
- processing this URB.
- */
-int ifxhcd_urb_enqueue( struct usb_hcd *_syshcd,
- /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/
- struct urb *_urb,
- gfp_t _mem_flags)
-{
- int retval = 0;
- ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
- struct usb_host_endpoint *_sysep = ifxhcd_urb_to_endpoint(_urb);
- ifxhcd_epqh_t *epqh;
-
- #ifdef __DEBUG__
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
- dump_urb_info(_urb, "ifxusb_hcd_urb_enqueue");
- #endif //__DEBUG__
-
- if (!ifxhcd->flags.b.port_connect_status) /* No longer connected. */
- return -ENODEV;
-
- #ifndef __EN_ISOC__
- if(usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
- {
- IFX_ERROR("ISOC transfer not supported!!!\n");
- return -ENODEV;
- }
- #endif
-
- retval=ifxhcd_urbd_create (ifxhcd,_urb);
-
- if (retval)
- {
- IFX_ERROR("IFXUSB HCD URB Enqueue failed creating URBD\n");
- return retval;
- }
- epqh = (ifxhcd_epqh_t *) _sysep->hcpriv;
- ifxhcd_epqh_ready(ifxhcd, epqh);
-
- select_eps(ifxhcd);
- //enable_sof(ifxhcd);
- {
- gint_data_t gintsts;
- gintsts.d32=0;
- gintsts.b.sofintr = 1;
- ifxusb_mreg(&ifxhcd->core_if.core_global_regs->gintmsk, 0,gintsts.d32);
- }
-
- return retval;
-}
-
-/*!
- \brief Aborts/cancels a USB transfer request. Always returns 0 to indicate
- success.
- */
-int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd,
- struct urb *_urb, int status /* Parameter neu in 2.6.28 */)
-{
- unsigned long flags;
- ifxhcd_hcd_t *ifxhcd;
- ifxhcd_urbd_t *urbd;
- ifxhcd_epqh_t *epqh;
- int is_active=0;
- int rc;
-
- struct usb_host_endpoint *_sysep;
-
- IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD URB Dequeue\n");
-
- #ifndef __EN_ISOC__
- if(usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
- return 0;
- #endif
-
- _sysep = ifxhcd_urb_to_endpoint(_urb);
-
- ifxhcd = syshcd_to_ifxhcd(_syshcd);
-
- SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
-
- /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
- rc = usb_hcd_check_unlink_urb(_syshcd, _urb, status);
- if (rc) {
- SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
- return rc;
- }
-
- urbd = (ifxhcd_urbd_t *) _urb->hcpriv;
-
- if(_sysep)
- epqh = (ifxhcd_epqh_t *) _sysep->hcpriv;
- else
- epqh = (ifxhcd_epqh_t *) urbd->epqh;
-
- if(epqh!=urbd->epqh)
- IFX_ERROR("%s inconsistant epqh %p %p\n",__func__,epqh,urbd->epqh);
-
- #ifdef __DEBUG__
- if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
- {
- dump_urb_info(_urb, "ifxhcd_urb_dequeue");
- if (epqh->is_active)
- dump_channel_info(ifxhcd, epqh);
- }
- #endif //__DEBUG__
-
- if(!epqh->hc)
- epqh->is_active=0;
- else if (!ifxhcd->flags.b.port_connect_status)
- epqh->is_active=0;
- else if (epqh->is_active && urbd->is_active)
- {
- /*== AVM/WK 20100709 - halt channel only if really started ==*/
- //if (epqh->hc->xfer_started && !epqh->hc->wait_for_sof) {
- /*== AVM/WK 20101112 - halt channel if started ==*/
- if (epqh->hc->xfer_started) {
- /*
- * If still connected (i.e. in host mode), halt the
- * channel so it can be used for other transfers. If
- * no longer connected, the host registers can't be
- * written to halt the channel since the core is in
- * device mode.
- */
- /* == 20110803 AVM/WK FIX propagate status == */
- if (_urb->status == -EINPROGRESS) {
- _urb->status = status;
- }
- ifxhcd_hc_halt(&ifxhcd->core_if, epqh->hc, HC_XFER_URB_DEQUEUE);
- epqh->hc = NULL;
- is_active=1;
- }
- }
-
- if(is_active)
- {
- SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
- }
- else
- {
- list_del_init(&urbd->urbd_list_entry);
- kfree (urbd);
-
- /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
- usb_hcd_unlink_urb_from_ep(_syshcd, _urb);
-
- SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
- _urb->hcpriv = NULL;
-// usb_hcd_giveback_urb(_syshcd, _urb);
- usb_hcd_giveback_urb(_syshcd, _urb, status /* neu in 2.6.28 */);
- select_eps(ifxhcd);
- }
-
- return 0;
-}
-
-
-
-/*!
- \brief Frees resources in the IFXUSB controller related to a given endpoint. Also
- clears state in the HCD related to the endpoint. Any URBs for the endpoint
- must already be dequeued.
- */
-void ifxhcd_endpoint_disable( struct usb_hcd *_syshcd,
- struct usb_host_endpoint *_sysep)
-{
- ifxhcd_epqh_t *epqh;
- ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
- unsigned long flags;
-
- int retry = 0;
-
- IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD EP DISABLE: _bEndpointAddress=0x%02x, "
- "endpoint=%d\n", _sysep->desc.bEndpointAddress,
- ifxhcd_ep_addr_to_endpoint(_sysep->desc.bEndpointAddress));
-
- SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
- if((uint32_t)_sysep>=0x80000000 && (uint32_t)_sysep->hcpriv>=(uint32_t)0x80000000)
- {
- epqh = (ifxhcd_epqh_t *)(_sysep->hcpriv);
- if (epqh && epqh->sysep==_sysep)
- {
-
-#if 1 /*== AVM/BC 20101111 CHG Option active: Kill URBs when disabling EP ==*/
- while (!list_empty(&epqh->urbd_list))
- {
- if (retry++ > 250)
- {
- IFX_WARN("IFXUSB HCD EP DISABLE:"
- " URBD List for this endpoint is not empty\n");
- break;
- }
- kill_all_urbs_in_epqh(ifxhcd, epqh, -ETIMEDOUT);
- }
-#else
- while (!list_empty(&epqh->urbd_list))
- {
- /** Check that the QTD list is really empty */
- if (retry++ > 250)
- {
- IFX_WARN("IFXUSB HCD EP DISABLE:"
- " URBD List for this endpoint is not empty\n");
- break;
- }
- SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
- schedule_timeout_uninterruptible(1);
- SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
- }
-#endif
-
- ifxhcd_epqh_free(epqh);
- _sysep->hcpriv = NULL;
- }
- }
- SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
-}
-
-
-/*!
- \brief Handles host mode interrupts for the IFXUSB controller. Returns IRQ_NONE if
- * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
- * interrupt.
- *
- * This function is called by the USB core when an interrupt occurs
- */
-irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd)
-{
- ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
- int32_t retval=0;
-
- //mask_and_ack_ifx_irq (ifxhcd->core_if.irq);
- retval = ifxhcd_handle_intr(ifxhcd);
- return IRQ_RETVAL(retval);
-}
-
-
-/*!
- \brief Handles host mode Over Current Interrupt
- */
-irqreturn_t ifxhcd_oc_irq(int _irq , void *_dev)
-{
- ifxhcd_hcd_t *ifxhcd = _dev;
- int32_t retval=1;
-
- ifxhcd->flags.b.port_over_current_change = 1;
- ifxusb_vbus_off(&ifxhcd->core_if);
- IFX_DEBUGP("OC INTERRUPT # %d\n",ifxhcd->core_if.core_no);
-
- //mask_and_ack_ifx_irq (_irq);
- return IRQ_RETVAL(retval);
-}
-
-/*!
- \brief Creates Status Change bitmap for the root hub and root port. The bitmap is
- returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
- is the status change indicator for the single root port. Returns 1 if either
- change indicator is 1, otherwise returns 0.
- */
-int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf)
-{
- ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
-
- _buf[0] = 0;
- _buf[0] |= (ifxhcd->flags.b.port_connect_status_change ||
- ifxhcd->flags.b.port_reset_change ||
- ifxhcd->flags.b.port_enable_change ||
- ifxhcd->flags.b.port_suspend_change ||
- ifxhcd->flags.b.port_over_current_change) << 1;
-
- #ifdef __DEBUG__
- if (_buf[0])
- {
- IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD HUB STATUS DATA:"
- " Root port status changed\n");
- IFX_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
- ifxhcd->flags.b.port_connect_status_change);
- IFX_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
- ifxhcd->flags.b.port_reset_change);
- IFX_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
- ifxhcd->flags.b.port_enable_change);
- IFX_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
- ifxhcd->flags.b.port_suspend_change);
- IFX_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
- ifxhcd->flags.b.port_over_current_change);
- }
- #endif //__DEBUG__
- return (_buf[0] != 0);
-}
-
-#ifdef __WITH_HS_ELECT_TST__
- extern void do_setup(ifxusb_core_if_t *_core_if) ;
- extern void do_in_ack(ifxusb_core_if_t *_core_if);
-#endif //__WITH_HS_ELECT_TST__
-
-/*!
- \brief Handles hub class-specific requests.
- */
-int ifxhcd_hub_control( struct usb_hcd *_syshcd,
- u16 _typeReq,
- u16 _wValue,
- u16 _wIndex,
- char *_buf,
- u16 _wLength)
-{
- int retval = 0;
-
- ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
- ifxusb_core_if_t *core_if = &ifxhcd->core_if;
- struct usb_hub_descriptor *desc;
- hprt0_data_t hprt0 = {.d32 = 0};
-
- uint32_t port_status;
-
- switch (_typeReq)
- {
- case ClearHubFeature:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "ClearHubFeature 0x%x\n", _wValue);
- switch (_wValue)
- {
- case C_HUB_LOCAL_POWER:
- case C_HUB_OVER_CURRENT:
- /* Nothing required here */
- break;
- default:
- retval = -EINVAL;
- IFX_ERROR ("IFXUSB HCD - "
- "ClearHubFeature request %xh unknown\n", _wValue);
- }
- break;
- case ClearPortFeature:
- if (!_wIndex || _wIndex > 1)
- goto error;
-
- switch (_wValue)
- {
- case USB_PORT_FEAT_ENABLE:
- IFX_DEBUGPL (DBG_ANY, "IFXUSB HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
- hprt0.d32 = ifxusb_read_hprt0 (core_if);
- hprt0.b.prtena = 1;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_SUSPEND:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
- hprt0.d32 = ifxusb_read_hprt0 (core_if);
- hprt0.b.prtres = 1;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- /* Clear Resume bit */
- mdelay (100);
- hprt0.b.prtres = 0;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_POWER:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_POWER\n");
- #ifdef __IS_DUAL__
- ifxusb_vbus_off(core_if);
- #else
- ifxusb_vbus_off(core_if);
- #endif
- hprt0.d32 = ifxusb_read_hprt0 (core_if);
- hprt0.b.prtpwr = 0;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_INDICATOR:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
- /* Port inidicator not supported */
- break;
- case USB_PORT_FEAT_C_CONNECTION:
- /* Clears drivers internal connect status change
- * flag */
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
- ifxhcd->flags.b.port_connect_status_change = 0;
- break;
- case USB_PORT_FEAT_C_RESET:
- /* Clears the driver's internal Port Reset Change
- * flag */
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
- ifxhcd->flags.b.port_reset_change = 0;
- break;
- case USB_PORT_FEAT_C_ENABLE:
- /* Clears the driver's internal Port
- * Enable/Disable Change flag */
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
- ifxhcd->flags.b.port_enable_change = 0;
- break;
- case USB_PORT_FEAT_C_SUSPEND:
- /* Clears the driver's internal Port Suspend
- * Change flag, which is set when resume signaling on
- * the host port is complete */
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
- ifxhcd->flags.b.port_suspend_change = 0;
- break;
- case USB_PORT_FEAT_C_OVER_CURRENT:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
- ifxhcd->flags.b.port_over_current_change = 0;
- break;
- default:
- retval = -EINVAL;
- IFX_ERROR ("IFXUSB HCD - "
- "ClearPortFeature request %xh "
- "unknown or unsupported\n", _wValue);
- }
- break;
- case GetHubDescriptor:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "GetHubDescriptor\n");
- desc = (struct usb_hub_descriptor *)_buf;
- desc->bDescLength = 9;
- desc->bDescriptorType = 0x29;
- desc->bNbrPorts = 1;
- desc->wHubCharacteristics = 0x08;
- desc->bPwrOn2PwrGood = 1;
- desc->bHubContrCurrent = 0;
-// desc->bitmap[0] = 0;
-// desc->bitmap[1] = 0xff;
- break;
- case GetHubStatus:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "GetHubStatus\n");
- memset (_buf, 0, 4);
- break;
- case GetPortStatus:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "GetPortStatus\n");
- if (!_wIndex || _wIndex > 1)
- goto error;
-
-# ifdef CONFIG_AVM_POWERMETER
- {
- /* first port only, but 2 Hosts */
- static unsigned char ucOldPower1 = 255;
- static unsigned char ucOldPower2 = 255;
-
- unsigned char ucNewPower = 0;
- struct usb_device *childdev = _syshcd->self.root_hub->children[0];
-
- if (childdev != NULL) {
- ucNewPower = (childdev->actconfig != NULL)
- ? childdev->actconfig->desc.bMaxPower
- : 50;/* default: 50 means 100 mA*/
- }
- if (_syshcd->self.busnum == 1) {
- if (ucOldPower1 != ucNewPower) {
- ucOldPower1 = ucNewPower;
- printk (KERN_INFO "IFXHCD#1: AVM Powermeter changed to %u mA\n", ucNewPower*2);
- PowerManagmentRessourceInfo(powerdevice_usb_host, ucNewPower*2);
- }
- } else {
- if (ucOldPower2 != ucNewPower) {
- ucOldPower2 = ucNewPower;
- printk (KERN_INFO "IFXHCD#2: AVM Powermeter changed to %u mA\n", ucNewPower*2);
- PowerManagmentRessourceInfo(powerdevice_usb_host2, ucNewPower*2);
- }
- }
- }
-# endif /*--- #ifdef CONFIG_AVM_POWERMETER ---*/
-
- port_status = 0;
- if (ifxhcd->flags.b.port_connect_status_change)
- port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
- if (ifxhcd->flags.b.port_enable_change)
- port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
- if (ifxhcd->flags.b.port_suspend_change)
- port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
- if (ifxhcd->flags.b.port_reset_change)
- port_status |= (1 << USB_PORT_FEAT_C_RESET);
- if (ifxhcd->flags.b.port_over_current_change)
- {
- IFX_ERROR("Device Not Supported\n");
- port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
- }
- if (!ifxhcd->flags.b.port_connect_status)
- {
- /*
- * The port is disconnected, which means the core is
- * either in device mode or it soon will be. Just
- * return 0's for the remainder of the port status
- * since the port register can't be read if the core
- * is in device mode.
- */
- *((u32 *) _buf) = cpu_to_le32(port_status);
- break;
- }
-
- hprt0.d32 = ifxusb_rreg(core_if->hprt0);
- IFX_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
- if (hprt0.b.prtconnsts)
- port_status |= (1 << USB_PORT_FEAT_CONNECTION);
- if (hprt0.b.prtena)
- port_status |= (1 << USB_PORT_FEAT_ENABLE);
- if (hprt0.b.prtsusp)
- port_status |= (1 << USB_PORT_FEAT_SUSPEND);
- if (hprt0.b.prtovrcurract)
- port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
- if (hprt0.b.prtrst)
- port_status |= (1 << USB_PORT_FEAT_RESET);
- if (hprt0.b.prtpwr)
- port_status |= (1 << USB_PORT_FEAT_POWER);
-/* if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED)
- port_status |= (1 << USB_PORT_FEAT_HIGHSPEED);
- else if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_LOW_SPEED)
- port_status |= (1 << USB_PORT_FEAT_LOWSPEED);*/
- if (hprt0.b.prttstctl)
- port_status |= (1 << USB_PORT_FEAT_TEST);
- /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
- *((u32 *) _buf) = cpu_to_le32(port_status);
- break;
- case SetHubFeature:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "SetHubFeature\n");
- /* No HUB features supported */
- break;
- case SetPortFeature:
- if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1))
- goto error;
- /*
- * The port is disconnected, which means the core is
- * either in device mode or it soon will be. Just
- * return without doing anything since the port
- * register can't be written if the core is in device
- * mode.
- */
- if (!ifxhcd->flags.b.port_connect_status)
- break;
- switch (_wValue)
- {
- case USB_PORT_FEAT_SUSPEND:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
- hprt0.d32 = ifxusb_read_hprt0 (core_if);
- hprt0.b.prtsusp = 1;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- //IFX_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32);
- /* Suspend the Phy Clock */
- {
- pcgcctl_data_t pcgcctl = {.d32=0};
- pcgcctl.b.stoppclk = 1;
- ifxusb_wreg(core_if->pcgcctl, pcgcctl.d32);
- }
- break;
- case USB_PORT_FEAT_POWER:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_POWER\n");
- ifxusb_vbus_on (core_if);
- hprt0.d32 = ifxusb_read_hprt0 (core_if);
- hprt0.b.prtpwr = 1;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- break;
- case USB_PORT_FEAT_RESET:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_RESET\n");
- hprt0.d32 = ifxusb_read_hprt0 (core_if);
- hprt0.b.prtrst = 1;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
- MDELAY (60);
- hprt0.b.prtrst = 0;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- break;
- #ifdef __WITH_HS_ELECT_TST__
- case USB_PORT_FEAT_TEST:
- {
- uint32_t t;
- gint_data_t gintmsk;
- t = (_wIndex >> 8); /* MSB wIndex USB */
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
- warn("USB_PORT_FEAT_TEST %d\n", t);
- if (t < 6)
- {
- hprt0.d32 = ifxusb_read_hprt0 (core_if);
- hprt0.b.prttstctl = t;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- }
- else if (t == 6) /* HS_HOST_PORT_SUSPEND_RESUME */
- {
- /* Save current interrupt mask */
- gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
-
- /* Disable all interrupts while we muck with
- * the hardware directly
- */
- ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
-
- /* 15 second delay per the test spec */
- mdelay(15000);
-
- /* Drive suspend on the root port */
- hprt0.d32 = ifxusb_read_hprt0 (core_if);
- hprt0.b.prtsusp = 1;
- hprt0.b.prtres = 0;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
-
- /* 15 second delay per the test spec */
- mdelay(15000);
-
- /* Drive resume on the root port */
- hprt0.d32 = ifxusb_read_hprt0 (core_if);
- hprt0.b.prtsusp = 0;
- hprt0.b.prtres = 1;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- mdelay(100);
-
- /* Clear the resume bit */
- hprt0.b.prtres = 0;
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
-
- /* Restore interrupts */
- ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
- }
- else if (t == 7) /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
- {
- /* Save current interrupt mask */
- gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
-
- /* Disable all interrupts while we muck with
- * the hardware directly
- */
- ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
-
- /* 15 second delay per the test spec */
- mdelay(15000);
-
- /* Send the Setup packet */
- do_setup(core_if);
-
- /* 15 second delay so nothing else happens for awhile */
- mdelay(15000);
-
- /* Restore interrupts */
- ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
- }
-
- else if (t == 8) /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
- {
- /* Save current interrupt mask */
- gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
-
- /* Disable all interrupts while we muck with
- * the hardware directly
- */
- ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
-
- /* Send the Setup packet */
- do_setup(core_if);
-
- /* 15 second delay so nothing else happens for awhile */
- mdelay(15000);
-
- /* Send the In and Ack packets */
- do_in_ack(core_if);
-
- /* 15 second delay so nothing else happens for awhile */
- mdelay(15000);
-
- /* Restore interrupts */
- ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
- }
- }
- break;
- #endif //__WITH_HS_ELECT_TST__
- case USB_PORT_FEAT_INDICATOR:
- IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
- "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
- /* Not supported */
- break;
- default:
- retval = -EINVAL;
- IFX_ERROR ("IFXUSB HCD - "
- "SetPortFeature request %xh "
- "unknown or unsupported\n", _wValue);
- }
- break;
- default:
- error:
- retval = -EINVAL;
- IFX_WARN ("IFXUSB HCD - "
- "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
- _typeReq, _wIndex, _wValue);
- }
- return retval;
-}
-
-
-/*!
- \brief Assigns transactions from a URBD to a free host channel and initializes the
- host channel to perform the transactions. The host channel is removed from
- the free list.
- \param _ifxhcd The HCD state structure.
- \param _epqh Transactions from the first URBD for this EPQH are selected and assigned to a free host channel.
- */
-static int assign_and_init_hc(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
-{
- ifxhcd_hc_t *ifxhc;
- ifxhcd_urbd_t *urbd;
- struct urb *urb;
-
- IFX_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _ifxhcd, _epqh);
-
- if(list_empty(&_epqh->urbd_list))
- return 0;
-
- ifxhc = list_entry(_ifxhcd->free_hc_list.next, ifxhcd_hc_t, hc_list_entry);
- /* Remove the host channel from the free list. */
- list_del_init(&ifxhc->hc_list_entry);
-
- urbd = list_entry(_epqh->urbd_list.next, ifxhcd_urbd_t, urbd_list_entry);
- urb = urbd->urb;
-
- _epqh->hc = ifxhc;
- _epqh->urbd = urbd;
- ifxhc->epqh = _epqh;
-
- urbd->is_active=1;
-
- /*
- * Use usb_pipedevice to determine device address. This address is
- * 0 before the SET_ADDRESS command and the correct address afterward.
- */
- ifxhc->dev_addr = usb_pipedevice(urb->pipe);
- ifxhc->ep_num = usb_pipeendpoint(urb->pipe);
-
- ifxhc->xfer_started = 0;
-
- if (urb->dev->speed == USB_SPEED_LOW) ifxhc->speed = IFXUSB_EP_SPEED_LOW;
- else if (urb->dev->speed == USB_SPEED_FULL) ifxhc->speed = IFXUSB_EP_SPEED_FULL;
- else ifxhc->speed = IFXUSB_EP_SPEED_HIGH;
-
- ifxhc->mps = _epqh->mps;
- ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-
- ifxhc->ep_type = _epqh->ep_type;
-
- if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
- {
- ifxhc->control_phase=IFXHCD_CONTROL_SETUP;
- ifxhc->is_in = 0;
- ifxhc->data_pid_start = IFXUSB_HC_PID_SETUP;
- ifxhc->xfer_buff = urbd->setup_buff;
- ifxhc->xfer_len = 8;
- ifxhc->xfer_count = 0;
- ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
- }
- else
- {
- ifxhc->is_in = urbd->is_in;
- ifxhc->xfer_buff = urbd->xfer_buff;
- ifxhc->xfer_len = urbd->xfer_len;
- ifxhc->xfer_count = 0;
- /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
- //ifxhc->data_pid_start = _epqh->data_toggle;
- ifxhc->data_pid_start = usb_gettoggle (urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout (urb->pipe))
- ? IFXUSB_HC_PID_DATA1
- : IFXUSB_HC_PID_DATA0;
- if(ifxhc->is_in)
- ifxhc->short_rw =0;
- else
- ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
-
- #ifdef __EN_ISOC__
- if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
- {
- struct usb_iso_packet_descriptor *frame_desc;
- frame_desc = &urb->iso_frame_desc[urbd->isoc_frame_index];
- ifxhc->xfer_buff += frame_desc->offset + urbd->isoc_split_offset;
- ifxhc->xfer_len = frame_desc->length - urbd->isoc_split_offset;
- if (ifxhc->isoc_xact_pos == IFXUSB_HCSPLIT_XACTPOS_ALL)
- {
- if (ifxhc->xfer_len <= 188)
- ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_ALL;
- else
- ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_BEGIN;
- }
- }
- #endif
- }
-
- ifxhc->do_ping=0;
- if (_ifxhcd->core_if.snpsid < 0x4f54271a && ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- ifxhc->do_ping=1;
-
-
- /* Set the split attributes */
- ifxhc->split = 0;
- if (_epqh->need_split) {
- ifxhc->split = 1;
- ifxhc->hub_addr = urb->dev->tt->hub->devnum;
- ifxhc->port_addr = urb->dev->ttport;
- }
-
- //ifxhc->uint16_t pkt_count_limit
-
- {
- hcint_data_t hc_intr_mask;
- uint8_t hc_num = ifxhc->hc_num;
- ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[hc_num];
-
- /* Clear old interrupt conditions for this host channel. */
- hc_intr_mask.d32 = 0xFFFFFFFF;
- hc_intr_mask.b.reserved = 0;
- ifxusb_wreg(&hc_regs->hcint, hc_intr_mask.d32);
-
- /* Enable channel interrupts required for this transfer. */
- hc_intr_mask.d32 = 0;
- hc_intr_mask.b.chhltd = 1;
- hc_intr_mask.b.ahberr = 1;
-
- ifxusb_wreg(&hc_regs->hcintmsk, hc_intr_mask.d32);
-
- /* Enable the top level host channel interrupt. */
- {
- uint32_t intr_enable;
- intr_enable = (1 << hc_num);
- ifxusb_mreg(&_ifxhcd->core_if.host_global_regs->haintmsk, 0, intr_enable);
- }
-
- /* Make sure host channel interrupts are enabled. */
- {
- gint_data_t gintmsk ={.d32 = 0};
- gintmsk.b.hcintr = 1;
- ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, 0, gintmsk.d32);
- }
-
- /*
- * Program the HCCHARn register with the endpoint characteristics for
- * the current transfer.
- */
- {
- hcchar_data_t hcchar;
-
- hcchar.d32 = 0;
- hcchar.b.devaddr = ifxhc->dev_addr;
- hcchar.b.epnum = ifxhc->ep_num;
- hcchar.b.lspddev = (ifxhc->speed == IFXUSB_EP_SPEED_LOW);
- hcchar.b.eptype = ifxhc->ep_type;
- hcchar.b.mps = ifxhc->mps;
- ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-
- IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, ifxhc->hc_num);
- IFX_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n" , hcchar.b.devaddr);
- IFX_DEBUGPL(DBG_HCDV, " Ep Num: %d\n" , hcchar.b.epnum);
- IFX_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
- IFX_DEBUGPL(DBG_HCDV, " Ep Type: %d\n" , hcchar.b.eptype);
- IFX_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n" , hcchar.b.mps);
- IFX_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n" , hcchar.b.multicnt);
- }
- /* Program the HCSPLIT register for SPLITs */
- {
- hcsplt_data_t hcsplt;
-
- hcsplt.d32 = 0;
- if (ifxhc->split)
- {
- IFX_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", ifxhc->hc_num,
- (ifxhc->split==2) ? "CSPLIT" : "SSPLIT");
- hcsplt.b.spltena = 1;
- hcsplt.b.compsplt = (ifxhc->split==2);
- #ifdef __EN_ISOC__
- if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
- hcsplt.b.xactpos = ifxhc->isoc_xact_pos;
- else
- #endif
- hcsplt.b.xactpos = IFXUSB_HCSPLIT_XACTPOS_ALL;
- hcsplt.b.hubaddr = ifxhc->hub_addr;
- hcsplt.b.prtaddr = ifxhc->port_addr;
- IFX_DEBUGPL(DBG_HCDV, " comp split %d\n" , hcsplt.b.compsplt);
- IFX_DEBUGPL(DBG_HCDV, " xact pos %d\n" , hcsplt.b.xactpos);
- IFX_DEBUGPL(DBG_HCDV, " hub addr %d\n" , hcsplt.b.hubaddr);
- IFX_DEBUGPL(DBG_HCDV, " port addr %d\n" , hcsplt.b.prtaddr);
- IFX_DEBUGPL(DBG_HCDV, " is_in %d\n" , ifxhc->is_in);
- IFX_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n" , ifxhc->mps);
- IFX_DEBUGPL(DBG_HCDV, " xferlen: %d\n" , ifxhc->xfer_len);
- }
- ifxusb_wreg(&hc_regs->hcsplt, hcsplt.d32);
- }
- }
-
- ifxhc->nak_retry_r=ifxhc->nak_retry=0;
- ifxhc->nak_countdown_r=ifxhc->nak_countdown=0;
-
- if (ifxhc->split)
- {
- if(ifxhc->is_in)
- {
- }
- else
- {
- }
- }
- else if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
- {
- if(ifxhc->is_in)
- {
- }
- else
- {
- }
- }
- else if(_epqh->ep_type==IFXUSB_EP_TYPE_BULK)
- {
- if(ifxhc->is_in)
- {
-// ifxhc->nak_retry_r=ifxhc->nak_retry=nak_retry_max;
-// ifxhc->nak_countdown_r=ifxhc->nak_countdown=nak_countdown_max;
- }
- else
- {
- }
- }
- else if(_epqh->ep_type==IFXUSB_EP_TYPE_INTR)
- {
- if(ifxhc->is_in)
- {
- }
- else
- {
- }
- }
- else if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
- {
- if(ifxhc->is_in)
- {
- }
- else
- {
- }
- }
-
- return 1;
-}
-
-/*!
- \brief This function selects transactions from the HCD transfer schedule and
- assigns them to available host channels. It is called from HCD interrupt
- handler functions.
- */
-static void select_eps_sub(ifxhcd_hcd_t *_ifxhcd)
-{
- struct list_head *epqh_ptr;
- struct list_head *urbd_ptr;
- ifxhcd_epqh_t *epqh;
- ifxhcd_urbd_t *urbd;
- int ret_val=0;
-
- /*== AVM/BC 20101111 Function called with Lock ==*/
-
-// #ifdef __DEBUG__
-// IFX_DEBUGPL(DBG_HCD, " ifxhcd_select_ep\n");
-// #endif
-
- /* Process entries in the periodic ready list. */
- #ifdef __EN_ISOC__
- epqh_ptr = _ifxhcd->epqh_isoc_ready.next;
- while (epqh_ptr != &_ifxhcd->epqh_isoc_ready && !list_empty(&_ifxhcd->free_hc_list))
- {
- epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
- epqh_ptr = epqh_ptr->next;
- if(epqh->period_do)
- {
- if(assign_and_init_hc(_ifxhcd, epqh))
- {
- IFX_DEBUGPL(DBG_HCD, " select_eps ISOC\n");
- list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_active);
- epqh->is_active=1;
- ret_val=1;
- epqh->period_do=0;
- }
- }
- }
- #endif
-
- epqh_ptr = _ifxhcd->epqh_intr_ready.next;
- while (epqh_ptr != &_ifxhcd->epqh_intr_ready && !list_empty(&_ifxhcd->free_hc_list))
- {
- epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
- epqh_ptr = epqh_ptr->next;
- if(epqh->period_do)
- {
- if(assign_and_init_hc(_ifxhcd, epqh))
- {
- IFX_DEBUGPL(DBG_HCD, " select_eps INTR\n");
- list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_intr_active);
- epqh->is_active=1;
- ret_val=1;
- epqh->period_do=0;
- }
- }
- }
-
- epqh_ptr = _ifxhcd->epqh_np_ready.next;
- while (epqh_ptr != &_ifxhcd->epqh_np_ready && !list_empty(&_ifxhcd->free_hc_list)) // may need to preserve at lease one for period
- {
- epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
- epqh_ptr = epqh_ptr->next;
- if(assign_and_init_hc(_ifxhcd, epqh))
- {
- IFX_DEBUGPL(DBG_HCD, " select_eps CTRL/BULK\n");
- list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_np_active);
- epqh->is_active=1;
- ret_val=1;
- }
- }
- if(ret_val)
- /*== AVM/BC 20101111 Function called with Lock ==*/
- process_channels_sub(_ifxhcd);
-
- /* AVM/BC 20101111 Urbds completion loop */
- while (!list_empty(&_ifxhcd->urbd_complete_list))
- {
- urbd_ptr = _ifxhcd->urbd_complete_list.next;
- list_del_init(urbd_ptr);
-
- urbd = list_entry(urbd_ptr, ifxhcd_urbd_t, urbd_list_entry);
-
- ifxhcd_complete_urb(_ifxhcd, urbd, urbd->status);
-
- }
-
-}
-
-static void select_eps_func(unsigned long data)
-{
- unsigned long flags;
-
- ifxhcd_hcd_t *ifxhcd;
- ifxhcd=((ifxhcd_hcd_t *)data);
-
- /* AVM/BC 20101111 select_eps_in_use flag removed */
-
- SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
-
- /*if(ifxhcd->select_eps_in_use){
- SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
- return;
- }
- ifxhcd->select_eps_in_use=1;
- */
-
- select_eps_sub(ifxhcd);
-
- //ifxhcd->select_eps_in_use=0;
-
- SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
-}
-
-void select_eps(ifxhcd_hcd_t *_ifxhcd)
-{
- if(in_irq())
- {
- if(!_ifxhcd->select_eps.func)
- {
- _ifxhcd->select_eps.next = NULL;
- _ifxhcd->select_eps.state = 0;
- atomic_set( &_ifxhcd->select_eps.count, 0);
- _ifxhcd->select_eps.func = select_eps_func;
- _ifxhcd->select_eps.data = (unsigned long)_ifxhcd;
- }
- tasklet_schedule(&_ifxhcd->select_eps);
- }
- else
- {
- unsigned long flags;
-
- /* AVM/BC 20101111 select_eps_in_use flag removed */
-
- SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-
- /*if(_ifxhcd->select_eps_in_use){
- printk ("select_eps non_irq: busy\n");
- SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
- return;
- }
- _ifxhcd->select_eps_in_use=1;
- */
-
- select_eps_sub(_ifxhcd);
-
- //_ifxhcd->select_eps_in_use=0;
-
- SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
- }
-}
-
-/*!
- \brief
- */
-static void process_unaligned( ifxhcd_epqh_t *_epqh)
-{
- #if defined(__UNALIGNED_BUFFER_ADJ__)
- if(!_epqh->aligned_checked)
- {
- uint32_t xfer_len;
- xfer_len=_epqh->urbd->xfer_len;
- if(_epqh->urbd->is_in && xfer_len<_epqh->mps)
- xfer_len = _epqh->mps;
- _epqh->using_aligned_buf=0;
-
- if(xfer_len > 0 && ((unsigned long)_epqh->urbd->xfer_buff) & 3)
- {
- if( _epqh->aligned_buf
- && _epqh->aligned_buf_len > 0
- && _epqh->aligned_buf_len < xfer_len
- )
- {
- ifxusb_free_buf(_epqh->aligned_buf);
- _epqh->aligned_buf=NULL;
- _epqh->aligned_buf_len=0;
- }
- if(! _epqh->aligned_buf || ! _epqh->aligned_buf_len)
- {
- _epqh->aligned_buf = ifxusb_alloc_buf(xfer_len, _epqh->urbd->is_in);
- if(_epqh->aligned_buf)
- _epqh->aligned_buf_len = xfer_len;
- }
- if(_epqh->aligned_buf)
- {
- if(!_epqh->urbd->is_in)
- memcpy(_epqh->aligned_buf, _epqh->urbd->xfer_buff, xfer_len);
- _epqh->using_aligned_buf=1;
- _epqh->hc->xfer_buff = _epqh->aligned_buf;
- }
- else
- IFX_WARN("%s():%d\n",__func__,__LINE__);
- }
- if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
- {
- _epqh->using_aligned_setup=0;
- if(((unsigned long)_epqh->urbd->setup_buff) & 3)
- {
- if(! _epqh->aligned_setup)
- _epqh->aligned_setup = ifxusb_alloc_buf(8,0);
- if(_epqh->aligned_setup)
- {
- memcpy(_epqh->aligned_setup, _epqh->urbd->setup_buff, 8);
- _epqh->using_aligned_setup=1;
- }
- else
- IFX_WARN("%s():%d\n",__func__,__LINE__);
- _epqh->hc->xfer_buff = _epqh->aligned_setup;
- }
- }
- }
- #elif defined(__UNALIGNED_BUFFER_CHK__)
- if(!_epqh->aligned_checked)
- {
- if(_epqh->urbd->is_in)
- {
- if(_epqh->urbd->xfer_len==0)
- IFX_WARN("%s():%d IN xfer while length is zero \n",__func__,__LINE__);
- else{
- if(_epqh->urbd->xfer_len < _epqh->mps)
- IFX_WARN("%s():%d IN xfer while length < mps \n",__func__,__LINE__);
-
- if(((unsigned long)_epqh->urbd->xfer_buff) & 3)
- IFX_WARN("%s():%d IN xfer Buffer UNALIGNED\n",__func__,__LINE__);
- }
- }
- else
- {
- if(_epqh->urbd->xfer_len > 0 && (((unsigned long)_epqh->urbd->xfer_buff) & 3) )
- IFX_WARN("%s():%d OUT xfer Buffer UNALIGNED\n",__func__,__LINE__);
- }
-
- if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
- {
- if(((unsigned long)_epqh->urbd->setup_buff) & 3)
- IFX_WARN("%s():%d SETUP xfer Buffer UNALIGNED\n",__func__,__LINE__);
- }
- }
- #endif
- _epqh->aligned_checked=1;
-}
-
-
-/*!
- \brief
- */
-void process_channels_sub(ifxhcd_hcd_t *_ifxhcd)
-{
- ifxhcd_epqh_t *epqh;
- struct list_head *epqh_item;
- struct ifxhcd_hc *hc;
-
- #ifdef __EN_ISOC__
- if (!list_empty(&_ifxhcd->epqh_isoc_active))
- {
- for (epqh_item = _ifxhcd->epqh_isoc_active.next;
- epqh_item != &_ifxhcd->epqh_isoc_active;
- )
- {
- epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
- epqh_item = epqh_item->next;
- hc=epqh->hc;
- if(hc && !hc->xfer_started && epqh->period_do)
- {
- if(hc->split==0
- || hc->split==1
- )
- {
- //epqh->ping_state = 0;
- process_unaligned(epqh);
- hc->wait_for_sof=epqh->wait_for_sof;
- epqh->wait_for_sof=0;
- ifxhcd_hc_start(&_ifxhcd->core_if, hc);
- epqh->period_do=0;
- {
- gint_data_t gintsts = {.d32 = 0};
- gintsts.b.sofintr = 1;
- ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk,0, gintsts.d32);
- }
- }
- }
- }
- }
- #endif
-
- if (!list_empty(&_ifxhcd->epqh_intr_active))
- {
- for (epqh_item = _ifxhcd->epqh_intr_active.next;
- epqh_item != &_ifxhcd->epqh_intr_active;
- )
- {
- epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
- epqh_item = epqh_item->next;
- hc=epqh->hc;
- if(hc && !hc->xfer_started && epqh->period_do)
- {
- if(hc->split==0
- || hc->split==1
- )
- {
- //epqh->ping_state = 0;
- process_unaligned(epqh);
- hc->wait_for_sof=epqh->wait_for_sof;
- epqh->wait_for_sof=0;
- ifxhcd_hc_start(&_ifxhcd->core_if, hc);
- epqh->period_do=0;
-#ifdef __USE_TIMER_4_SOF__
- /* AVM/WK change: let hc_start decide, if irq is needed */
-#else
- {
- gint_data_t gintsts = {.d32 = 0};
- gintsts.b.sofintr = 1;
- ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk,0, gintsts.d32);
- }
-#endif
- }
- }
-
- }
- }
-
- if (!list_empty(&_ifxhcd->epqh_np_active))
- {
- for (epqh_item = _ifxhcd->epqh_np_active.next;
- epqh_item != &_ifxhcd->epqh_np_active;
- )
- {
- epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
- epqh_item = epqh_item->next;
- hc=epqh->hc;
- if(hc)
- {
- if(!hc->xfer_started)
- {
- if(hc->split==0
- || hc->split==1
- //|| hc->split_counter == 0
- )
- {
- //epqh->ping_state = 0;
- process_unaligned(epqh);
- hc->wait_for_sof=epqh->wait_for_sof;
- epqh->wait_for_sof=0;
- ifxhcd_hc_start(&_ifxhcd->core_if, hc);
- }
- }
- }
- }
- }
-}
-
-void process_channels(ifxhcd_hcd_t *_ifxhcd)
-{
- unsigned long flags;
-
- /* AVM/WK Fix: use spin_lock instead busy flag
- **/
- SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-
- //if(_ifxhcd->process_channels_in_use)
- // return;
- //_ifxhcd->process_channels_in_use=1;
-
- process_channels_sub(_ifxhcd);
- //_ifxhcd->process_channels_in_use=0;
- SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-}
-
-
-#ifdef __HC_XFER_TIMEOUT__
- static void hc_xfer_timeout(unsigned long _ptr)
- {
- hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr;
- int hc_num = xfer_info->hc->hc_num;
- IFX_WARN("%s: timeout on channel %d\n", __func__, hc_num);
- IFX_WARN(" start_hcchar_val 0x%08x\n", xfer_info->hc->start_hcchar_val);
- }
-#endif
-
-void ifxhcd_hc_dumb_rx(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc,uint8_t *dump_buf)
-{
- ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
- hctsiz_data_t hctsiz= { .d32=0 };
- hcchar_data_t hcchar;
-
-
- _ifxhc->xfer_len = _ifxhc->mps;
- hctsiz.b.xfersize = _ifxhc->mps;
- hctsiz.b.pktcnt = 0;
- hctsiz.b.pid = _ifxhc->data_pid_start;
- ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
-
- ifxusb_wreg(&hc_regs->hcdma, (uint32_t)(CPHYSADDR( ((uint32_t)(dump_buf)))));
-
- {
- hcint_data_t hcint= { .d32=0 };
-// hcint.b.nak =1;
-// hcint.b.nyet=1;
-// hcint.b.ack =1;
- hcint.d32 =0xFFFFFFFF;
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
- }
-
- /* Set host channel enable after all other setup is complete. */
- hcchar.b.chen = 1;
- hcchar.b.chdis = 0;
- hcchar.b.epdir = 1;
- IFX_DEBUGPL(DBG_HCDV, " HCCHART: 0x%08x\n", hcchar.d32);
- ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-}
-
-/*!
- \brief This function trigger a data transfer for a host channel and
- starts the transfer.
-
- For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
- register along with a packet count of 1 and the channel is enabled. This
- causes a single PING transaction to occur. Other fields in HCTSIZ are
- simply set to 0 since no data transfer occurs in this case.
-
- For a PING transfer in DMA mode, the HCTSIZ register is initialized with
- all the information required to perform the subsequent data transfer. In
- addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
- controller performs the entire PING protocol, then starts the data
- transfer.
- \param _core_if Pointer of core_if structure
- \param _ifxhc Information needed to initialize the host channel. The xfer_len
- value may be reduced to accommodate the max widths of the XferSize and
- PktCnt fields in the HCTSIZn register. The multi_count value may be changed
- to reflect the final xfer_len value.
- */
-void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc)
-{
- hctsiz_data_t hctsiz= { .d32=0 };
- hcchar_data_t hcchar;
- uint32_t max_hc_xfer_size = _core_if->params.max_transfer_size;
- uint16_t max_hc_pkt_count = _core_if->params.max_packet_count;
- ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
- hfnum_data_t hfnum;
-
- hctsiz.b.dopng = 0;
-// if(_ifxhc->do_ping && !_ifxhc->is_in) hctsiz.b.dopng = 1;
-
- _ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
-
- /* AVM/BC 20101111 Workaround: Always PING if HI-Speed Out and xfer_len > 0 */
- if(/*_ifxhc->do_ping &&*/
- (!_ifxhc->is_in) &&
- (_ifxhc->speed == IFXUSB_EP_SPEED_HIGH) &&
- ((_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK) || ((_ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL) && (_ifxhc->control_phase != IFXHCD_CONTROL_SETUP))) &&
- _ifxhc->xfer_len
- )
- hctsiz.b.dopng = 1;
-
- _ifxhc->xfer_started = 1;
-
- if(_ifxhc->epqh->pkt_count_limit > 0 && _ifxhc->epqh->pkt_count_limit < max_hc_pkt_count )
- {
- max_hc_pkt_count=_ifxhc->epqh->pkt_count_limit;
- if(max_hc_pkt_count * _ifxhc->mps < max_hc_xfer_size)
- max_hc_xfer_size = max_hc_pkt_count * _ifxhc->mps;
- }
- if (_ifxhc->split > 0)
- {
- {
- gint_data_t gintsts = {.d32 = 0};
- gintsts.b.sofintr = 1;
- ifxusb_mreg(&_core_if->core_global_regs->gintmsk,0, gintsts.d32);
- }
-
- _ifxhc->start_pkt_count = 1;
- if(!_ifxhc->is_in && _ifxhc->split>1) // OUT CSPLIT
- _ifxhc->xfer_len = 0;
- if (_ifxhc->xfer_len > _ifxhc->mps)
- _ifxhc->xfer_len = _ifxhc->mps;
- if (_ifxhc->xfer_len > 188)
- _ifxhc->xfer_len = 188;
- }
- else if(_ifxhc->is_in)
- {
- _ifxhc->short_rw = 0;
- if (_ifxhc->xfer_len > 0)
- {
- if (_ifxhc->xfer_len > max_hc_xfer_size)
- _ifxhc->xfer_len = max_hc_xfer_size - _ifxhc->mps + 1;
- _ifxhc->start_pkt_count = (_ifxhc->xfer_len + _ifxhc->mps - 1) / _ifxhc->mps;
- if (_ifxhc->start_pkt_count > max_hc_pkt_count)
- _ifxhc->start_pkt_count = max_hc_pkt_count;
- }
- else /* Need 1 packet for transfer length of 0. */
- _ifxhc->start_pkt_count = 1;
- _ifxhc->xfer_len = _ifxhc->start_pkt_count * _ifxhc->mps;
- }
- else //non-split out
- {
- if (_ifxhc->xfer_len == 0)
- {
- /*== AVM/BC WK 20110421 ZERO PACKET Workaround: Is not an error ==*/
- //if(_ifxhc->short_rw==0)
- // printk(KERN_INFO "%s() line %d: ZLP write without short_rw set!\n",__func__,__LINE__);
- _ifxhc->start_pkt_count = 1;
- }
- else
- {
- if (_ifxhc->xfer_len > max_hc_xfer_size)
- {
- _ifxhc->start_pkt_count = (max_hc_xfer_size / _ifxhc->mps);
- _ifxhc->xfer_len = _ifxhc->start_pkt_count * _ifxhc->mps;
- }
- else
- {
- _ifxhc->start_pkt_count = (_ifxhc->xfer_len+_ifxhc->mps-1) / _ifxhc->mps;
-// if(_ifxhc->start_pkt_count * _ifxhc->mps == _ifxhc->xfer_len )
-// _ifxhc->start_pkt_count += _ifxhc->short_rw;
- /*== AVM/BC WK 20110421 ZERO PACKET Workaround / check if short_rw is needed ==*/
- if(_ifxhc->start_pkt_count * _ifxhc->mps != _ifxhc->xfer_len )
- _ifxhc->short_rw = 0;
- }
- }
- }
-
- #ifdef __EN_ISOC__
- if (_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
- {
- /* Set up the initial PID for the transfer. */
- #if 1
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
- #else
- if (_ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- {
- if (_ifxhc->is_in)
- {
- if (_ifxhc->multi_count == 1)
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
- else if (_ifxhc->multi_count == 2)
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
- else
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA2;
- }
- else
- {
- if (_ifxhc->multi_count == 1)
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
- else
- _ifxhc->data_pid_start = IFXUSB_HC_PID_MDATA;
- }
- }
- else
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
- #endif
- }
- #endif
-
- hctsiz.b.xfersize = _ifxhc->xfer_len;
- hctsiz.b.pktcnt = _ifxhc->start_pkt_count;
- hctsiz.b.pid = _ifxhc->data_pid_start;
-
- ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
-
-
- IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _ifxhc->hc_num);
- IFX_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
- IFX_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n" , hctsiz.b.pktcnt);
- IFX_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
- IFX_DEBUGPL(DBG_HCDV, " DMA: 0x%08x\n", (uint32_t)(CPHYSADDR( ((uint32_t)(_ifxhc->xfer_buff))+ _ifxhc->xfer_count )));
- ifxusb_wreg(&hc_regs->hcdma, (uint32_t)(CPHYSADDR( ((uint32_t)(_ifxhc->xfer_buff))+ _ifxhc->xfer_count )));
-
- /* Start the split */
- if (_ifxhc->split>0)
- {
- hcsplt_data_t hcsplt;
- hcsplt.d32 = ifxusb_rreg (&hc_regs->hcsplt);
- hcsplt.b.spltena = 1;
- if (_ifxhc->split>1)
- hcsplt.b.compsplt = 1;
- else
- hcsplt.b.compsplt = 0;
-
- #ifdef __EN_ISOC__
- if (_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
- hcsplt.b.xactpos = _ifxhc->isoc_xact_pos;
- else
- #endif
- hcsplt.b.xactpos = IFXUSB_HCSPLIT_XACTPOS_ALL;// if not ISO
- ifxusb_wreg(&hc_regs->hcsplt, hcsplt.d32);
- IFX_DEBUGPL(DBG_HCDV, " SPLIT: XACT_POS:0x%08x\n", hcsplt.d32);
- }
-
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-// hcchar.b.multicnt = _ifxhc->multi_count;
- hcchar.b.multicnt = 1;
-
- #ifdef __DEBUG__
- _ifxhc->start_hcchar_val = hcchar.d32;
- if (hcchar.b.chdis)
- IFX_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
- __func__, _ifxhc->hc_num, hcchar.d32);
- #endif
-
- /* Set host channel enable after all other setup is complete. */
- hcchar.b.chen = 1;
- hcchar.b.chdis = 0;
- hcchar.b.epdir = _ifxhc->is_in;
- _ifxhc->hcchar=hcchar.d32;
-
- IFX_DEBUGPL(DBG_HCDV, " HCCHART: 0x%08x\n", _ifxhc->hcchar);
-
- /* == 20110901 AVM/WK Fix: Clear IRQ flags in any case ==*/
- {
- hcint_data_t hcint= { .d32=0 };
- hcint.d32 =0xFFFFFFFF;
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
- }
-
- if(_ifxhc->wait_for_sof==0)
- {
- hcint_data_t hcint;
-
- hcint.d32=ifxusb_rreg(&hc_regs->hcintmsk);
-
- hcint.b.nak =0;
- hcint.b.ack =0;
- /* == 20110901 AVM/WK Fix: We don't need NOT YET IRQ ==*/
- hcint.b.nyet=0;
- if(_ifxhc->nak_countdown_r)
- hcint.b.nak =1;
- ifxusb_wreg(&hc_regs->hcintmsk, hcint.d32);
-
- /* AVM WK / BC 20100827
- * MOVED. Oddframe updated inmediatly before write HCChar Register.
- */
- if (_ifxhc->ep_type == IFXUSB_EP_TYPE_INTR || _ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
- {
- hfnum.d32 = ifxusb_rreg(&_core_if->host_global_regs->hfnum);
- /* 1 if _next_ frame is odd, 0 if it's even */
- hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
- _ifxhc->hcchar=hcchar.d32;
- }
-
- ifxusb_wreg(&hc_regs->hcchar, _ifxhc->hcchar);
-#ifdef __USE_TIMER_4_SOF__
- } else {
- //activate SOF IRQ
- gint_data_t gintsts = {.d32 = 0};
- gintsts.b.sofintr = 1;
- ifxusb_mreg(&_core_if->core_global_regs->gintmsk,0, gintsts.d32);
-#endif
- }
-
- #ifdef __HC_XFER_TIMEOUT__
- /* Start a timer for this transfer. */
- init_timer(&_ifxhc->hc_xfer_timer);
- _ifxhc->hc_xfer_timer.function = hc_xfer_timeout;
- _ifxhc->hc_xfer_timer.core_if = _core_if;
- _ifxhc->hc_xfer_timer.hc = _ifxhc;
- _ifxhc->hc_xfer_timer.data = (unsigned long)(&_ifxhc->hc_xfer_info);
- _ifxhc->hc_xfer_timer.expires = jiffies + (HZ*10);
- add_timer(&_ifxhc->hc_xfer_timer);
- #endif
-}
-
-/*!
- \brief Attempts to halt a host channel. This function should only be called
- to abort a transfer in DMA mode. Under normal circumstances in DMA mode, the
- controller halts the channel when the transfer is complete or a condition
- occurs that requires application intervention.
-
- In DMA mode, always sets the Channel Enable and Channel Disable bits of the
- HCCHARn register. The controller ensures there is space in the request
- queue before submitting the halt request.
-
- Some time may elapse before the core flushes any posted requests for this
- host channel and halts. The Channel Halted interrupt handler completes the
- deactivation of the host channel.
- */
-void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if,
- ifxhcd_hc_t *_ifxhc,
- ifxhcd_halt_status_e _halt_status)
-{
- hcchar_data_t hcchar;
- ifxusb_hc_regs_t *hc_regs;
-
- hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
-
- WARN_ON(_halt_status == HC_XFER_NO_HALT_STATUS);
-
- if (_halt_status == HC_XFER_URB_DEQUEUE ||
- _halt_status == HC_XFER_AHB_ERR)
- {
- /*
- * Disable all channel interrupts except Ch Halted. The URBD
- * and EPQH state associated with this transfer has been cleared
- * (in the case of URB_DEQUEUE), so the channel needs to be
- * shut down carefully to prevent crashes.
- */
- hcint_data_t hcintmsk;
- hcintmsk.d32 = 0;
- hcintmsk.b.chhltd = 1;
- ifxusb_wreg(&hc_regs->hcintmsk, hcintmsk.d32);
-
- /*
- * Make sure no other interrupts besides halt are currently
- * pending. Handling another interrupt could cause a crash due
- * to the URBD and EPQH state.
- */
- ifxusb_wreg(&hc_regs->hcint, ~hcintmsk.d32);
-
- /*
- * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
- * even if the channel was already halted for some other
- * reason.
- */
- _ifxhc->halt_status = _halt_status;
-
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- if (hcchar.b.chen == 0)
- {
- /*
- * The channel is either already halted or it hasn't
- * started yet. In DMA mode, the transfer may halt if
- * it finishes normally or a condition occurs that
- * requires driver intervention. Don't want to halt
- * the channel again. In either Slave or DMA mode,
- * it's possible that the transfer has been assigned
- * to a channel, but not started yet when an URB is
- * dequeued. Don't want to halt a channel that hasn't
- * started yet.
- */
- return;
- }
- }
-
- if (_ifxhc->halting)
- {
- /*
- * A halt has already been issued for this channel. This might
- * happen when a transfer is aborted by a higher level in
- * the stack.
- */
- #ifdef __DEBUG__
- IFX_PRINT("*** %s: Channel %d, _hc->halting already set ***\n",
- __func__, _ifxhc->hc_num);
- #endif
- //ifxusb_dump_global_registers(_core_if); */
- //ifxusb_dump_host_registers(_core_if); */
- return;
- }
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- /* == AVM/WK 20100709 halt channel only if enabled ==*/
- if (hcchar.b.chen) {
- _ifxhc->halting = 1;
- hcchar.b.chdis = 1;
-
- ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
- _ifxhc->halt_status = _halt_status;
- }
-
- IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n" , __func__, _ifxhc->hc_num);
- IFX_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n" , hcchar.d32);
- IFX_DEBUGPL(DBG_HCDV, " halting: %d\n" , _ifxhc->halting);
- IFX_DEBUGPL(DBG_HCDV, " halt_status: %d\n" , _ifxhc->halt_status);
-
- return;
-}
-
-/*!
- \brief Clears a host channel.
- */
-void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc)
-{
- ifxusb_hc_regs_t *hc_regs;
-
- _ifxhc->xfer_started = 0;
- /*
- * Clear channel interrupt enables and any unhandled channel interrupt
- * conditions.
- */
- hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
- ifxusb_wreg(&hc_regs->hcintmsk, 0);
- ifxusb_wreg(&hc_regs->hcint, 0xFFFFFFFF);
-
- #ifdef __HC_XFER_TIMEOUT__
- del_timer(&_ifxhc->hc_xfer_timer);
- #endif
- #ifdef __DEBUG__
- {
- hcchar_data_t hcchar;
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- if (hcchar.b.chdis)
- IFX_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", __func__, _ifxhc->hc_num, hcchar.d32);
- }
- #endif
-}
-
-
-
-
-
-
-
-
-#ifdef __DEBUG__
- static void dump_urb_info(struct urb *_urb, char* _fn_name)
- {
- IFX_PRINT("%s, urb %p\n" , _fn_name, _urb);
- IFX_PRINT(" Device address: %d\n", usb_pipedevice(_urb->pipe));
- IFX_PRINT(" Endpoint: %d, %s\n" , usb_pipeendpoint(_urb->pipe),
- (usb_pipein(_urb->pipe) ? "IN" : "OUT"));
- IFX_PRINT(" Endpoint type: %s\n",
- ({ char *pipetype;
- switch (usb_pipetype(_urb->pipe)) {
- case PIPE_CONTROL: pipetype = "CONTROL"; break;
- case PIPE_BULK: pipetype = "BULK"; break;
- case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
- case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
- default: pipetype = "UNKNOWN"; break;
- };
- pipetype;
- }));
- IFX_PRINT(" Speed: %s\n",
- ({ char *speed;
- switch (_urb->dev->speed) {
- case USB_SPEED_HIGH: speed = "HIGH"; break;
- case USB_SPEED_FULL: speed = "FULL"; break;
- case USB_SPEED_LOW: speed = "LOW"; break;
- default: speed = "UNKNOWN"; break;
- };
- speed;
- }));
- IFX_PRINT(" Max packet size: %d\n",
- usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe)));
- IFX_PRINT(" Data buffer length: %d\n", _urb->transfer_buffer_length);
- IFX_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n",
- _urb->transfer_buffer, (void *)_urb->transfer_dma);
- IFX_PRINT(" Setup buffer: %p, Setup DMA: %p\n",
- _urb->setup_packet, (void *)_urb->setup_dma);
- IFX_PRINT(" Interval: %d\n", _urb->interval);
- if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
- {
- int i;
- for (i = 0; i < _urb->number_of_packets; i++)
- {
- IFX_PRINT(" ISO Desc %d:\n", i);
- IFX_PRINT(" offset: %d, length %d\n",
- _urb->iso_frame_desc[i].offset,
- _urb->iso_frame_desc[i].length);
- }
- }
- }
-
- static void dump_channel_info(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
- {
- if (_epqh->hc != NULL)
- {
- ifxhcd_hc_t *hc = _epqh->hc;
- struct list_head *item;
- ifxhcd_epqh_t *epqh_item;
-
- ifxusb_hc_regs_t *hc_regs;
-
- hcchar_data_t hcchar;
- hcsplt_data_t hcsplt;
- hctsiz_data_t hctsiz;
- uint32_t hcdma;
-
- hc_regs = _ifxhcd->core_if.hc_regs[hc->hc_num];
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- hcsplt.d32 = ifxusb_rreg(&hc_regs->hcsplt);
- hctsiz.d32 = ifxusb_rreg(&hc_regs->hctsiz);
- hcdma = ifxusb_rreg(&hc_regs->hcdma);
-
- IFX_PRINT(" Assigned to channel %d:\n" , hc->hc_num);
- IFX_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
- IFX_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n" , hctsiz.d32, hcdma);
- IFX_PRINT(" dev_addr: %d, ep_num: %d, is_in: %d\n",
- hc->dev_addr, hc->ep_num, hc->is_in);
- IFX_PRINT(" ep_type: %d\n" , hc->ep_type);
- IFX_PRINT(" max_packet_size: %d\n", hc->mps);
- IFX_PRINT(" data_pid_start: %d\n" , hc->data_pid_start);
- IFX_PRINT(" xfer_started: %d\n" , hc->xfer_started);
- IFX_PRINT(" halt_status: %d\n" , hc->halt_status);
- IFX_PRINT(" xfer_buff: %p\n" , hc->xfer_buff);
- IFX_PRINT(" xfer_len: %d\n" , hc->xfer_len);
- IFX_PRINT(" epqh: %p\n" , hc->epqh);
- IFX_PRINT(" NP Active:\n");
- list_for_each(item, &_ifxhcd->epqh_np_active)
- {
- epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
- IFX_PRINT(" %p\n", epqh_item);
- }
- IFX_PRINT(" NP Ready:\n");
- list_for_each(item, &_ifxhcd->epqh_np_ready)
- {
- epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
- IFX_PRINT(" %p\n", epqh_item);
- }
- IFX_PRINT(" INTR Active:\n");
- list_for_each(item, &_ifxhcd->epqh_intr_active)
- {
- epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
- IFX_PRINT(" %p\n", epqh_item);
- }
- IFX_PRINT(" INTR Ready:\n");
- list_for_each(item, &_ifxhcd->epqh_intr_ready)
- {
- epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
- IFX_PRINT(" %p\n", epqh_item);
- }
- #ifdef __EN_ISOC__
- IFX_PRINT(" ISOC Active:\n");
- list_for_each(item, &_ifxhcd->epqh_isoc_active)
- {
- epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
- IFX_PRINT(" %p\n", epqh_item);
- }
- IFX_PRINT(" ISOC Ready:\n");
- list_for_each(item, &_ifxhcd->epqh_isoc_ready)
- {
- epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
- IFX_PRINT(" %p\n", epqh_item);
- }
- #endif
- IFX_PRINT(" Standby:\n");
- list_for_each(item, &_ifxhcd->epqh_stdby)
- {
- epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
- IFX_PRINT(" %p\n", epqh_item);
- }
- }
- }
-#endif //__DEBUG__
-
-
-/*!
- \brief This function writes a packet into the Tx FIFO associated with the Host
- Channel. For a channel associated with a non-periodic EP, the non-periodic
- Tx FIFO is written. For a channel associated with a periodic EP, the
- periodic Tx FIFO is written. This function should only be called in Slave
- mode.
-
- Upon return the xfer_buff and xfer_count fields in _hc are incremented by
- then number of bytes written to the Tx FIFO.
- */
-
-#ifdef __ENABLE_DUMP__
- void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd)
- {
- int num_channels;
- int i;
- num_channels = _ifxhcd->core_if.params.host_channels;
- IFX_PRINT("\n");
- IFX_PRINT("************************************************************\n");
- IFX_PRINT("HCD State:\n");
- IFX_PRINT(" Num channels: %d\n", num_channels);
- for (i = 0; i < num_channels; i++) {
- ifxhcd_hc_t *hc = &_ifxhcd->ifxhc[i];
- IFX_PRINT(" Channel %d:\n", hc->hc_num);
- IFX_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
- hc->dev_addr, hc->ep_num, hc->is_in);
- IFX_PRINT(" speed: %d\n" , hc->speed);
- IFX_PRINT(" ep_type: %d\n" , hc->ep_type);
- IFX_PRINT(" mps: %d\n", hc->mps);
- IFX_PRINT(" data_pid_start: %d\n" , hc->data_pid_start);
- IFX_PRINT(" xfer_started: %d\n" , hc->xfer_started);
- IFX_PRINT(" xfer_buff: %p\n" , hc->xfer_buff);
- IFX_PRINT(" xfer_len: %d\n" , hc->xfer_len);
- IFX_PRINT(" xfer_count: %d\n" , hc->xfer_count);
- IFX_PRINT(" halting: %d\n" , hc->halting);
- IFX_PRINT(" halt_status: %d\n" , hc->halt_status);
- IFX_PRINT(" split: %d\n" , hc->split);
- IFX_PRINT(" hub_addr: %d\n" , hc->hub_addr);
- IFX_PRINT(" port_addr: %d\n" , hc->port_addr);
- #ifdef __EN_ISOC__
- IFX_PRINT(" isoc_xact_pos: %d\n" , hc->isoc_xact_pos);
- #endif
- IFX_PRINT(" epqh: %p\n" , hc->epqh);
- IFX_PRINT(" short_rw: %d\n" , hc->short_rw);
- IFX_PRINT(" do_ping: %d\n" , hc->do_ping);
- IFX_PRINT(" control_phase: %d\n" , hc->control_phase);
- IFX_PRINT(" pkt_count_limit: %d\n", hc->epqh->pkt_count_limit);
- IFX_PRINT(" start_pkt_count: %d\n" , hc->start_pkt_count);
- }
- IFX_PRINT("************************************************************\n");
- IFX_PRINT("\n");
- }
-#endif //__ENABLE_DUMP__
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd.h b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd.h
deleted file mode 100644
index 3a408513ce..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd.h
+++ /dev/null
@@ -1,628 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxhcd.h
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : This file contains the structures, constants, and interfaces for
- ** the Host Contoller Driver (HCD).
- **
- ** The Host Controller Driver (HCD) is responsible for translating requests
- ** from the USB Driver into the appropriate actions on the IFXUSB controller.
- ** It isolates the USBD from the specifics of the controller by providing an
- ** API to the USBD.
- ** FUNCTIONS :
- ** COMPILER : gcc
- ** REFERENCE : Synopsys DWC-OTG Driver 2.7
- ** COPYRIGHT :
- ** Version Control Section **
- ** $Author$
- ** $Date$
- ** $Revisions$
- ** $Log$ Revision history
-*****************************************************************************/
-
-/*!
- \defgroup IFXUSB_HCD HCD Interface
- \ingroup IFXUSB_DRIVER_V3
- \brief The Host Controller Driver (HCD) is responsible for translating requests
- from the USB Driver into the appropriate actions on the IFXUSB controller.
- It isolates the USBD from the specifics of the controller by providing an
- API to the USBD.
- */
-
-
-/*!
- \file ifxhcd.h
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the structures, constants, and interfaces for
- the Host Contoller Driver (HCD).
- */
-
-#if !defined(__IFXHCD_H__)
-#define __IFXHCD_H__
-
-#include <linux/list.h>
-#include <linux/usb.h>
-
-#ifdef __USE_TIMER_4_SOF__
-#include <linux/hrtimer.h>
-#endif
-#include <linux/usb/hcd.h>
-
-#include "ifxusb_cif.h"
-#include "ifxusb_plat.h"
-
-
-
-/*!
- \addtogroup IFXUSB_HCD
- */
-/*@{*/
-
-/* Phases for control transfers.*/
-typedef enum ifxhcd_control_phase {
- IFXHCD_CONTROL_SETUP,
- IFXHCD_CONTROL_DATA,
- IFXHCD_CONTROL_STATUS
-} ifxhcd_control_phase_e;
-
-/* Reasons for halting a host channel. */
-typedef enum ifxhcd_halt_status
-{
- HC_XFER_NO_HALT_STATUS, // Initial
- HC_XFER_COMPLETE, // Xact complete without error, upward
- HC_XFER_URB_COMPLETE, // Xfer complete without error, short upward
- HC_XFER_STALL, // HC stopped abnormally, upward/downward
- HC_XFER_XACT_ERR, // HC stopped abnormally, upward
- HC_XFER_FRAME_OVERRUN, // HC stopped abnormally, upward
- HC_XFER_BABBLE_ERR, // HC stopped abnormally, upward
- HC_XFER_AHB_ERR, // HC stopped abnormally, upward
- HC_XFER_DATA_TOGGLE_ERR,
- HC_XFER_URB_DEQUEUE, // HC stopper manually, downward
- HC_XFER_NAK // HC stopped by nak monitor, downward
-} ifxhcd_halt_status_e;
-
-struct ifxhcd_urbd;
-struct ifxhcd_hc ;
-struct ifxhcd_epqh ;
-struct ifxhcd_hcd;
-
-/*!
- \brief A URB Descriptor (URBD) holds the state of a bulk, control,
- interrupt, or isochronous transfer. A single URBD is created for each URB
- (of one of these types) submitted to the HCD. The transfer associated with
- a URBD may require one or multiple transactions.
-
- A URBD is linked to a EP Queue Head, which is entered in either the
- isoc, intr or non-periodic schedule for execution. When a URBD is chosen for
- execution, some or all of its transactions may be executed. After
- execution, the state of the URBD is updated. The URBD may be retired if all
- its transactions are complete or if an error occurred. Otherwise, it
- remains in the schedule so more transactions can be executed later.
- */
-typedef struct ifxhcd_urbd {
- struct list_head urbd_list_entry; // Hook for EPQH->urbd_list and ifxhcd->urbd_complete_list
- struct urb *urb; /*!< URB for this transfer */
- //struct urb {
- // struct list_head urb_list;
- // struct list_head anchor_list;
- // struct usb_anchor * anchor;
- // struct usb_device * dev;
- // struct usb_host_endpoint * ep;
- // unsigned int pipe;
- // int status;
- // unsigned int transfer_flags;
- // void * transfer_buffer;
- // dma_addr_t transfer_dma;
- // u32 transfer_buffer_length;
- // u32 actual_length;
- // unsigned char * setup_packet;
- // dma_addr_t setup_dma;
- // int start_frame;
- // int number_of_packets;
- // int interval;
- // int error_count;
- // void * context;
- // usb_complete_t complete;
- // struct usb_iso_packet_descriptor iso_frame_desc[0];
- //};
- //urb_list For use by current owner of the URB.
- //anchor_list membership in the list of an anchor
- //anchor to anchor URBs to a common mooring
- //dev Identifies the USB device to perform the request.
- //ep Points to the endpoint's data structure. Will
- // eventually replace pipe.
- //pipe Holds endpoint number, direction, type, and more.
- // Create these values with the eight macros available; u
- // sb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is
- // "ctrl", "bulk", "int" or "iso". For example
- // usb_sndbulkpipe or usb_rcvintpipe. Endpoint numbers
- // range from zero to fifteen. Note that "in" endpoint two
- // is a different endpoint (and pipe) from "out" endpoint
- // two. The current configuration controls the existence,
- // type, and maximum packet size of any given endpoint.
- //status This is read in non-iso completion functions to get
- // the status of the particular request. ISO requests
- // only use it to tell whether the URB was unlinked;
- // detailed status for each frame is in the fields of
- // the iso_frame-desc.
- //transfer_flags A variety of flags may be used to affect how URB
- // submission, unlinking, or operation are handled.
- // Different kinds of URB can use different flags.
- // URB_SHORT_NOT_OK
- // URB_ISO_ASAP
- // URB_NO_TRANSFER_DMA_MAP
- // URB_NO_SETUP_DMA_MAP
- // URB_NO_FSBR
- // URB_ZERO_PACKET
- // URB_NO_INTERRUPT
- //transfer_buffer This identifies the buffer to (or from) which the I/O
- // request will be performed (unless URB_NO_TRANSFER_DMA_MAP
- // is set). This buffer must be suitable for DMA; allocate it
- // with kmalloc or equivalent. For transfers to "in"
- // endpoints, contents of this buffer will be modified. This
- // buffer is used for the data stage of control transfers.
- //transfer_dma When transfer_flags includes URB_NO_TRANSFER_DMA_MAP, the
- // device driver is saying that it provided this DMA address,
- // which the host controller driver should use in preference
- // to the transfer_buffer.
- //transfer_buffer_length How big is transfer_buffer. The transfer may be broken
- // up into chunks according to the current maximum packet size
- // for the endpoint, which is a function of the configuration
- // and is encoded in the pipe. When the length is zero, neither
- // transfer_buffer nor transfer_dma is used.
- //actual_length This is read in non-iso completion functions, and it tells
- // how many bytes (out of transfer_buffer_length) were transferred.
- // It will normally be the same as requested, unless either an error
- // was reported or a short read was performed. The URB_SHORT_NOT_OK
- // transfer flag may be used to make such short reads be reported
- // as errors.
- //setup_packet Only used for control transfers, this points to eight bytes of
- // setup data. Control transfers always start by sending this data
- // to the device. Then transfer_buffer is read or written, if needed.
- //setup_dma For control transfers with URB_NO_SETUP_DMA_MAP set, the device
- // driver has provided this DMA address for the setup packet. The
- // host controller driver should use this in preference to setup_packet.
- //start_frame Returns the initial frame for isochronous transfers.
- //number_of_packets Lists the number of ISO transfer buffers.
- //interval Specifies the polling interval for interrupt or isochronous transfers.
- // The units are frames (milliseconds) for for full and low speed devices,
- // and microframes (1/8 millisecond) for highspeed ones.
- //error_count Returns the number of ISO transfers that reported errors.
- //context For use in completion functions. This normally points to request-specific
- // driver context.
- //complete Completion handler. This URB is passed as the parameter to the completion
- // function. The completion function may then do what it likes with the URB,
- // including resubmitting or freeing it.
- //iso_frame_desc[0] Used to provide arrays of ISO transfer buffers and to collect the transfer
- // status for each buffer.
-
- struct ifxhcd_epqh *epqh;
- // Actual data portion, not SETUP or STATUS in case of CTRL XFER
- // DMA adjusted
- uint8_t *setup_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
- uint8_t *xfer_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
- uint32_t xfer_len; /*!< Total number of bytes to transfer in this xfer. */
- unsigned is_in :1;
- unsigned is_active:1;
-
- // For ALL XFER
- uint8_t error_count; /*!< Holds the number of bus errors that have occurred for a transaction
- within this transfer.
- */
- /*== AVM/BC 20101111 Needed for URB Complete List ==*/
- int status;
- // For ISOC XFER only
- #ifdef __EN_ISOC__
- int isoc_frame_index; /*!< Index of the next frame descriptor for an isochronous transfer. A
- frame descriptor describes the buffer position and length of the
- data to be transferred in the next scheduled (micro)frame of an
- isochronous transfer. It also holds status for that transaction.
- The frame index starts at 0.
- */
- // For SPLITed ISOC XFER only
- uint8_t isoc_split_pos; /*!< Position of the ISOC split on full/low speed */
- uint16_t isoc_split_offset;/*!< Position of the ISOC split in the buffer for the current frame */
- #endif
-} ifxhcd_urbd_t;
-
-/*!
- \brief A EP Queue Head (EPQH) holds the static characteristics of an endpoint and
- maintains a list of transfers (URBDs) for that endpoint. A EPQH structure may
- be entered in either the isoc, intr or non-periodic schedule.
- */
-
-typedef struct ifxhcd_epqh {
- struct list_head epqh_list_entry; // Hook for EP Queues
- struct list_head urbd_list; /*!< List of URBDs for this EPQH. */
- struct ifxhcd_hc *hc; /*!< Host channel currently processing transfers for this EPQH. */
- struct ifxhcd_urbd *urbd; /*!< URBD currently assigned to a host channel for this EPQH. */
- struct usb_host_endpoint *sysep;
- uint8_t ep_type; /*!< Endpoint type. One of the following values:
- - IFXUSB_EP_TYPE_CTRL
- - IFXUSB_EP_TYPE_ISOC
- - IFXUSB_EP_TYPE_BULK
- - IFXUSB_EP_TYPE_INTR
- */
- uint16_t mps; /*!< wMaxPacketSize Field of Endpoint Descriptor. */
-
- /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
- /*uint8_t data_toggle;*/ /*!< Determines the PID of the next data packet
- One of the following values:
- - IFXHCD_HC_PID_DATA0
- - IFXHCD_HC_PID_DATA1
- */
- uint8_t is_active;
-
- uint8_t pkt_count_limit;
- #ifdef __EPQD_DESTROY_TIMEOUT__
- struct timer_list destroy_timer;
- #endif
-
- uint16_t wait_for_sof;
- uint8_t need_split; /*!< Full/low speed endpoint on high-speed hub requires split. */
- uint16_t interval; /*!< Interval between transfers in (micro)frames. (for INTR)*/
-
- uint16_t period_counter; /*!< Interval between transfers in (micro)frames. */
- uint8_t period_do;
-
- uint8_t aligned_checked;
-
- #if defined(__UNALIGNED_BUFFER_ADJ__)
- uint8_t using_aligned_setup;
- uint8_t *aligned_setup;
- uint8_t using_aligned_buf;
- uint8_t *aligned_buf;
- unsigned aligned_buf_len : 19;
- #endif
-
- uint8_t *dump_buf;
-} ifxhcd_epqh_t;
-
-
-#if defined(__HC_XFER_TIMEOUT__)
- struct ifxusb_core_if;
- struct ifxhcd_hc;
- typedef struct hc_xfer_info
- {
- struct ifxusb_core_if *core_if;
- struct ifxhcd_hc *hc;
- } hc_xfer_info_t;
-#endif //defined(__HC_XFER_TIMEOUT__)
-
-
-/*!
- \brief Host channel descriptor. This structure represents the state of a single
- host channel when acting in host mode. It contains the data items needed to
- transfer packets to an endpoint via a host channel.
- */
-typedef struct ifxhcd_hc
-{
- struct list_head hc_list_entry ; // Hook to free hc
- struct ifxhcd_epqh *epqh ; /*!< EP Queue Head for the transfer being processed by this channel. */
-
- uint8_t hc_num ; /*!< Host channel number used for register address lookup */
- uint8_t *xfer_buff ; /*!< Pointer to the entire transfer buffer. */
- uint32_t xfer_count ; /*!< Number of bytes transferred so far. The offset of the begin of the buf */
- uint32_t xfer_len ; /*!< Total number of bytes to transfer in this xfer. */
- uint16_t start_pkt_count ; /*!< Packet count at start of transfer. Used to calculate the actual xfer size*/
- ifxhcd_halt_status_e halt_status; /*!< Reason for halting the host channel. */
-
- unsigned dev_addr : 7; /*!< Device to access */
- unsigned ep_num : 4; /*!< EP to access */
- unsigned is_in : 1; /*!< EP direction. 0: OUT, 1: IN */
- unsigned speed : 2; /*!< EP speed. */
- unsigned ep_type : 2; /*!< Endpoint type. */
- unsigned mps :11; /*!< Max packet size in bytes */
- unsigned data_pid_start : 2; /*!< PID for initial transaction. */
- unsigned do_ping : 1; /*!< Set to 1 to indicate that a PING request should be issued on this
- channel. If 0, process normally.
- */
-
- unsigned xfer_started : 1; /*!< Flag to indicate whether the transfer has been started. Set to 1 if
- it has been started, 0 otherwise.
- */
- unsigned halting : 1; /*!< Set to 1 if the host channel has been halted, but the core is not
- finished flushing queued requests. Otherwise 0.
- */
- unsigned short_rw : 1; /*!< When Tx, means termination needed.
- When Rx, indicate Short Read */
- /* Split settings for the host channel */
- unsigned split : 2; /*!< Split: 0-Non Split, 1-SSPLIT, 2&3 CSPLIT */
-
- /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
- unsigned nyet_count;
-
- /* nak monitor */
- unsigned nak_retry_r : 16;
- unsigned nak_retry : 16;
- #define nak_retry_max 40000
- unsigned nak_countdown : 8;
- unsigned nak_countdown_r: 8;
- #define nak_countdown_max 1
-
- uint16_t wait_for_sof;
- ifxhcd_control_phase_e control_phase; /*!< Current phase for control transfers (Setup, Data, or Status). */
- uint32_t ssplit_out_xfer_count; /*!< How many bytes transferred during SSPLIT OUT */
- #ifdef __DEBUG__
- uint32_t start_hcchar_val;
- #endif
- #ifdef __HC_XFER_TIMEOUT__
- hc_xfer_info_t hc_xfer_info;
- struct timer_list hc_xfer_timer;
- #endif
- uint32_t hcchar;
-
- /* Split settings for the host channel */
- uint8_t hub_addr; /*!< Address of high speed hub */
- uint8_t port_addr; /*!< Port of the low/full speed device */
- #ifdef __EN_ISOC__
- uint8_t isoc_xact_pos; /*!< Split transaction position */
- #endif
-} ifxhcd_hc_t;
-
-
-/*!
- \brief This structure holds the state of the HCD, including the non-periodic and
- periodic schedules.
- */
-typedef struct ifxhcd_hcd
-{
- struct device *dev;
- struct hc_driver hc_driver;
- ifxusb_core_if_t core_if; /*!< Pointer to the core interface structure. */
- struct usb_hcd *syshcd;
-
- volatile union ifxhcd_internal_flags
- {
- uint32_t d32;
- struct
- {
- unsigned port_connect_status_change : 1;
- unsigned port_connect_status : 1;
- unsigned port_reset_change : 1;
- unsigned port_enable_change : 1;
- unsigned port_suspend_change : 1;
- unsigned port_over_current_change : 1;
- unsigned reserved : 27;
- } b;
- } flags; /*!< Internal HCD Flags */
-
- struct ifxhcd_hc ifxhc[MAX_EPS_CHANNELS]; /*!< Array of pointers to the host channel descriptors. Allows accessing
- a host channel descriptor given the host channel number. This is
- useful in interrupt handlers.
- */
- struct list_head free_hc_list; /*!< Free host channels in the controller. This is a list of ifxhcd_hc_t items. */
- uint8_t *status_buf; /*!< Buffer to use for any data received during the status phase of a
- control transfer. Normally no data is transferred during the status
- phase. This buffer is used as a bit bucket.
- */
- #define IFXHCD_STATUS_BUF_SIZE 64
-
- struct list_head epqh_np_active; // with URBD, with HC
- struct list_head epqh_np_ready; // with URBD, No HC
-
- struct list_head epqh_intr_active; // with URBD, with HC
- struct list_head epqh_intr_ready; // with URBD, no pass, No HC
-
- #ifdef __EN_ISOC__
- struct list_head epqh_isoc_active; // with URBD, with HC
- struct list_head epqh_isoc_ready; // with URBD, no pass, No HC
- #endif
-
- /*== AVM/BC 20101111 URB Complete List ==*/
- struct list_head urbd_complete_list;
-
- struct list_head epqh_stdby;
-
- /* AVM/BC 20101111 flags removed */
- //unsigned process_channels_in_use : 1;
- //unsigned select_eps_in_use : 1;
-
- struct tasklet_struct select_eps; /*!< Tasket to do a reset */
- uint32_t lastframe;
- spinlock_t lock;
-#ifdef __USE_TIMER_4_SOF__
- struct hrtimer hr_timer;
-#endif
-} ifxhcd_hcd_t;
-
-/* Gets the ifxhcd_hcd from a struct usb_hcd */
-static inline ifxhcd_hcd_t *syshcd_to_ifxhcd(struct usb_hcd *syshcd)
-{
- return (ifxhcd_hcd_t *)(syshcd->hcd_priv[0]);
-}
-
-/* Gets the struct usb_hcd that contains a ifxhcd_hcd_t. */
-static inline struct usb_hcd *ifxhcd_to_syshcd(ifxhcd_hcd_t *ifxhcd)
-{
- return (struct usb_hcd *)(ifxhcd->syshcd);
-}
-
-/*! \brief HCD Create/Destroy Functions */
-/*@{*/
- extern int ifxhcd_init (ifxhcd_hcd_t *_ifxhcd);
- extern void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd);
-/*@}*/
-
-/*! \brief Linux HC Driver API Functions */
-/*@{*/
-extern int ifxhcd_start(struct usb_hcd *hcd);
-extern void ifxhcd_stop (struct usb_hcd *hcd);
-extern int ifxhcd_get_frame_number(struct usb_hcd *hcd);
-
-
-/*!
- \brief This function does the setup for a data transfer for a host channel and
- starts the transfer. May be called in either Slave mode or DMA mode. In
- Slave mode, the caller must ensure that there is sufficient space in the
- request queue and Tx Data FIFO.
-
- For an OUT transfer in Slave mode, it loads a data packet into the
- appropriate FIFO. If necessary, additional data packets will be loaded in
- the Host ISR.
-
- For an IN transfer in Slave mode, a data packet is requested. The data
- packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
- additional data packets are requested in the Host ISR.
-
- For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
- register along with a packet count of 1 and the channel is enabled. This
- causes a single PING transaction to occur. Other fields in HCTSIZ are
- simply set to 0 since no data transfer occurs in this case.
-
- For a PING transfer in DMA mode, the HCTSIZ register is initialized with
- all the information required to perform the subsequent data transfer. In
- addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
- controller performs the entire PING protocol, then starts the data
- transfer.
-
- @param _ifxhc Information needed to initialize the host channel. The xfer_len
- value may be reduced to accommodate the max widths of the XferSize and
- PktCnt fields in the HCTSIZn register. The multi_count value may be changed
- to reflect the final xfer_len value.
- */
-extern void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
-
-//extern int ifxhcd_urb_enqueue(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep, struct urb *_urb, gfp_t mem_flags);
-//extern int ifxhcd_urb_dequeue(struct usb_hcd *_syshcd, struct urb *_urb);
-extern irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd);
-int ifxhcd_urb_enqueue( struct usb_hcd *_syshcd,
- /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/
- struct urb *_urb,
- gfp_t _mem_flags);
-int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd,
- struct urb *_urb, int status /* Parameter neu in 2.6.28 */);
-
-extern void ifxhcd_endpoint_disable(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep);
-
-extern int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf);
-extern int ifxhcd_hub_control( struct usb_hcd *_syshcd,
- u16 _typeReq,
- u16 _wValue,
- u16 _wIndex,
- char *_buf,
- u16 _wLength);
-
-/*@}*/
-
-/*! \brief Transaction Execution Functions */
-/*@{*/
-extern void ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status);
-
-/*@}*/
-
-/*! \brief Deferred Transaction Execution Functions */
-/*@{*/
-
-/*== AVM/BC 20101111 URB Complete List ==*/
-extern void defer_ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status);
-
-/*!
- \brief Clears the transfer state for a host channel. This function is normally
- called after a transfer is done and the host channel is being released.
- */
-extern void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
-
-/*!
- \brief Attempts to halt a host channel. This function should only be called in
- Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
- normal circumstances in DMA mode, the controller halts the channel when the
- transfer is complete or a condition occurs that requires application
- intervention.
-
- In slave mode, checks for a free request queue entry, then sets the Channel
- Enable and Channel Disable bits of the Host Channel Characteristics
- register of the specified channel to intiate the halt. If there is no free
- request queue entry, sets only the Channel Disable bit of the HCCHARn
- register to flush requests for this channel. In the latter case, sets a
- flag to indicate that the host channel needs to be halted when a request
- queue slot is open.
-
- In DMA mode, always sets the Channel Enable and Channel Disable bits of the
- HCCHARn register. The controller ensures there is space in the request
- queue before submitting the halt request.
-
- Some time may elapse before the core flushes any posted requests for this
- host channel and halts. The Channel Halted interrupt handler completes the
- deactivation of the host channel.
- */
-extern void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if,
- ifxhcd_hc_t *_ifxhc,
- ifxhcd_halt_status_e _halt_status);
-
-/*!
- \brief Prepares a host channel for transferring packets to/from a specific
- endpoint. The HCCHARn register is set up with the characteristics specified
- in _ifxhc. Host channel interrupts that may need to be serviced while this
- transfer is in progress are enabled.
- */
-extern void ifxhcd_hc_init(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
-
-/*!
- \brief This function is called to handle the disconnection of host port.
- */
-int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd);
-/*@}*/
-
-/*! \brief Interrupt Handler Functions */
-/*@{*/
-extern irqreturn_t ifxhcd_oc_irq(int _irq, void *_dev);
-
-extern int32_t ifxhcd_handle_oc_intr(ifxhcd_hcd_t *_ifxhcd);
-extern int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd);
-/*@}*/
-
-
-/*! \brief Schedule Queue Functions */
-/*@{*/
-extern ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb);
-extern void ifxhcd_epqh_free ( ifxhcd_epqh_t *_epqh);
-extern void select_eps (ifxhcd_hcd_t *_ifxhcd);
-extern void process_channels(ifxhcd_hcd_t *_ifxhcd);
-extern void process_channels_sub(ifxhcd_hcd_t *_ifxhcd);
-extern void complete_channel(ifxhcd_hcd_t *_ifxhcd, ifxhcd_hc_t *_ifxhc, ifxhcd_urbd_t *_urbd);
-extern void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-extern void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-extern void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-extern void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh);
-extern int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb);
-/*@}*/
-
-/*! \brief Gets the usb_host_endpoint associated with an URB. */
-static inline struct usb_host_endpoint *ifxhcd_urb_to_endpoint(struct urb *_urb)
-{
- struct usb_device *dev = _urb->dev;
- int ep_num = usb_pipeendpoint(_urb->pipe);
-
- return (usb_pipein(_urb->pipe))?(dev->ep_in[ep_num]):(dev->ep_out[ep_num]);
-}
-
-/*!
- * \brief Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
- * qualified with its direction (possible 32 endpoints per device).
- */
-#define ifxhcd_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
- ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
-
-
-/* AVM/WK: not needed?
-
-extern struct usb_device *usb_alloc_dev (struct usb_device *parent, struct usb_bus *, unsigned port);
-extern int usb_add_hcd (struct usb_hcd *syshcd, unsigned int irqnum, unsigned long irqflags);
-extern void usb_remove_hcd (struct usb_hcd *syshcd);
-extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, struct device *dev, char *bus_name);
-extern void usb_hcd_giveback_urb (struct usb_hcd *syshcd, struct urb *urb);
-extern void usb_put_hcd (struct usb_hcd *syshcd);
-extern long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount);
-
-*/
-/** Internal Functions */
-void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd);
-extern char *syserr(int errno);
-
-/*@}*//*IFXUSB_HCD*/
-
-#endif // __IFXHCD_H__
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_es.c b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_es.c
deleted file mode 100644
index ef9e8c05ef..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_es.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxhcd_es.c
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : The file contain function to enable host mode USB-IF Electrical Test function.
- *****************************************************************************/
-
-/*!
- \file ifxhcd_es.c
- \ingroup IFXUSB_DRIVER_V3
- \brief The file contain function to enable host mode USB-IF Electrical Test function.
-*/
-
-#include <linux/version.h>
-#include "ifxusb_version.h"
-
-#include <linux/kernel.h>
-
-#include <linux/errno.h>
-
-#include <linux/dma-mapping.h>
-
-#include "ifxusb_plat.h"
-#include "ifxusb_regs.h"
-#include "ifxusb_cif.h"
-#include "ifxhcd.h"
-
-
-#ifdef __WITH_HS_ELECT_TST__
- /*
- * Quick and dirty hack to implement the HS Electrical Test
- * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
- *
- * This code was copied from our userspace app "hset". It sends a
- * Get Device Descriptor control sequence in two parts, first the
- * Setup packet by itself, followed some time later by the In and
- * Ack packets. Rather than trying to figure out how to add this
- * functionality to the normal driver code, we just hijack the
- * hardware, using these two function to drive the hardware
- * directly.
- */
-
-
- void do_setup(ifxusb_core_if_t *_core_if)
- {
-
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
- ifxusb_host_global_regs_t *hc_global_regs = _core_if->host_global_regs;
- ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[0];
- uint32_t *data_fifo = _core_if->data_fifo[0];
-
- gint_data_t gintsts;
- hctsiz_data_t hctsiz;
- hcchar_data_t hcchar;
- haint_data_t haint;
- hcint_data_t hcint;
-
-
- /* Enable HAINTs */
- ifxusb_wreg(&hc_global_regs->haintmsk, 0x0001);
-
- /* Enable HCINTs */
- ifxusb_wreg(&hc_regs->hcintmsk, 0x04a3);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /*
- * Send Setup packet (Get Device Descriptor)
- */
-
- /* Make sure channel is disabled */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
- hcchar.b.chdis = 1;
- // hcchar.b.chen = 1;
- ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
- //sleep(1);
- mdelay(1000);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //if (hcchar.b.chen) {
- // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
- //}
- }
-
- /* Set HCTSIZ */
- hctsiz.d32 = 0;
- hctsiz.b.xfersize = 8;
- hctsiz.b.pktcnt = 1;
- hctsiz.b.pid = IFXUSB_HC_PID_SETUP;
- ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
-
- /* Set HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
- hcchar.b.epdir = 0;
- hcchar.b.epnum = 0;
- hcchar.b.mps = 8;
- hcchar.b.chen = 1;
- ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-
- /* Fill FIFO with Setup data for Get Device Descriptor */
- ifxusb_wreg(data_fifo++, 0x01000680);
- ifxusb_wreg(data_fifo++, 0x00080000);
-
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for host channel interrupt */
- do {
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- } while (gintsts.b.hcintr == 0);
-
- //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Disable HCINTs */
- ifxusb_wreg(&hc_regs->hcintmsk, 0x0000);
-
- /* Disable HAINTs */
- ifxusb_wreg(&hc_global_regs->haintmsk, 0x0000);
-
- /* Read HAINT */
- haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
- }
-
- void do_in_ack(ifxusb_core_if_t *_core_if)
- {
-
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
- ifxusb_host_global_regs_t *hc_global_regs = _core_if->host_global_regs;
- ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[0];
- uint32_t *data_fifo = _core_if->data_fifo[0];
-
- gint_data_t gintsts;
- hctsiz_data_t hctsiz;
- hcchar_data_t hcchar;
- haint_data_t haint;
- hcint_data_t hcint;
- grxsts_data_t grxsts;
-
- /* Enable HAINTs */
- ifxusb_wreg(&hc_global_regs->haintmsk, 0x0001);
-
- /* Enable HCINTs */
- ifxusb_wreg(&hc_regs->hcintmsk, 0x04a3);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /*
- * Receive Control In packet
- */
-
- /* Make sure channel is disabled */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
- hcchar.b.chdis = 1;
- hcchar.b.chen = 1;
- ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
- //sleep(1);
- mdelay(1000);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //if (hcchar.b.chen) {
- // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
- //}
- }
-
- /* Set HCTSIZ */
- hctsiz.d32 = 0;
- hctsiz.b.xfersize = 8;
- hctsiz.b.pktcnt = 1;
- hctsiz.b.pid = IFXUSB_HC_PID_DATA1;
- ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
-
- /* Set HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
- hcchar.b.epdir = 1;
- hcchar.b.epnum = 0;
- hcchar.b.mps = 8;
- hcchar.b.chen = 1;
- ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for receive status queue interrupt */
- do {
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- } while (gintsts.b.rxstsqlvl == 0);
-
- //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-
- /* Read RXSTS */
- grxsts.d32 = ifxusb_rreg(&global_regs->grxstsp);
- //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-
- /* Clear RXSTSQLVL in GINTSTS */
- gintsts.d32 = 0;
- gintsts.b.rxstsqlvl = 1;
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- switch (grxsts.hb.pktsts) {
- case IFXUSB_HSTS_DATA_UPDT:
- /* Read the data into the host buffer */
- if (grxsts.hb.bcnt > 0) {
- int i;
- int word_count = (grxsts.hb.bcnt + 3) / 4;
-
- for (i = 0; i < word_count; i++) {
- (void)ifxusb_rreg(data_fifo++);
- }
- }
-
- //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.hb.bcnt);
- break;
-
- default:
- //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
- break;
- }
-
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for receive status queue interrupt */
- do {
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- } while (gintsts.b.rxstsqlvl == 0);
-
- //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Read RXSTS */
- grxsts.d32 = ifxusb_rreg(&global_regs->grxstsp);
- //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-
- /* Clear RXSTSQLVL in GINTSTS */
- gintsts.d32 = 0;
- gintsts.b.rxstsqlvl = 1;
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- switch (grxsts.hb.pktsts) {
- case IFXUSB_HSTS_XFER_COMP:
- break;
-
- default:
- //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
- break;
- }
-
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for host channel interrupt */
- do {
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- } while (gintsts.b.hcintr == 0);
-
- //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- // usleep(100000);
- // mdelay(100);
- mdelay(1);
-
- /*
- * Send handshake packet
- */
-
- /* Read HAINT */
- haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Make sure channel is disabled */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- if (hcchar.b.chen) {
- //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
- hcchar.b.chdis = 1;
- hcchar.b.chen = 1;
- ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
- //sleep(1);
- mdelay(1000);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-
- /* Read HAINT */
- haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //if (hcchar.b.chen) {
- // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
- //}
- }
-
- /* Set HCTSIZ */
- hctsiz.d32 = 0;
- hctsiz.b.xfersize = 0;
- hctsiz.b.pktcnt = 1;
- hctsiz.b.pid = IFXUSB_HC_PID_DATA1;
- ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
-
- /* Set HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
- hcchar.b.epdir = 0;
- hcchar.b.epnum = 0;
- hcchar.b.mps = 8;
- hcchar.b.chen = 1;
- ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-
- /* Wait for host channel interrupt */
- do {
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- } while (gintsts.b.hcintr == 0);
-
- //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-
- /* Disable HCINTs */
- ifxusb_wreg(&hc_regs->hcintmsk, 0x0000);
-
- /* Disable HAINTs */
- ifxusb_wreg(&hc_global_regs->haintmsk, 0x0000);
-
- /* Read HAINT */
- haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
- //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-
- /* Read HCINT */
- hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
- //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-
- /* Read HCCHAR */
- hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
- //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-
- /* Clear HCINT */
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-
- /* Clear HAINT */
- ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-
- /* Clear GINTSTS */
- ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-
- /* Read GINTSTS */
- gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
- //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
- }
-#endif //__WITH_HS_ELECT_TST__
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_intr.c b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_intr.c
deleted file mode 100644
index 76fe602c76..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_intr.c
+++ /dev/null
@@ -1,3742 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxhcd_intr.c
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : This file contains the implementation of the HCD Interrupt handlers.
- *****************************************************************************/
-
-/*!
- \file ifxhcd_intr.c
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the implementation of the HCD Interrupt handlers.
-*/
-
-
-#include <linux/version.h>
-#include "ifxusb_version.h"
-
-#include "ifxusb_plat.h"
-#include "ifxusb_regs.h"
-#include "ifxusb_cif.h"
-
-#include "ifxhcd.h"
-
-/* AVM/WK 20100520*/
-#ifdef __EN_ISOC__
-#error AVM/WK: CONFIG_USB_HOST_IFX_WITH_ISO currently not supported!
-#endif
-
-/* Macro used to clear one channel interrupt */
-#define clear_hc_int(_hc_regs_,_intr_) \
- do { \
- hcint_data_t hcint_clear = {.d32 = 0}; \
- hcint_clear.b._intr_ = 1; \
- ifxusb_wreg(&((_hc_regs_)->hcint), hcint_clear.d32); \
- } while (0)
-
-/*
- * Macro used to disable one channel interrupt. Channel interrupts are
- * disabled when the channel is halted or released by the interrupt handler.
- * There is no need to handle further interrupts of that type until the
- * channel is re-assigned. In fact, subsequent handling may cause crashes
- * because the channel structures are cleaned up when the channel is released.
- */
-#define disable_hc_int(_hc_regs_,_intr_) \
- do { \
- hcint_data_t hcintmsk = {.d32 = 0}; \
- hcintmsk.b._intr_ = 1; \
- ifxusb_mreg(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \
- } while (0)
-
-#define enable_hc_int(_hc_regs_,_intr_) \
- do { \
- hcint_data_t hcintmsk = {.d32 = 0}; \
- hcintmsk.b._intr_ = 1; \
- ifxusb_mreg(&((_hc_regs_)->hcintmsk),0, hcintmsk.d32); \
- } while (0)
-
-/*
- * Save the starting data toggle for the next transfer. The data toggle is
- * saved in the QH for non-control transfers and it's saved in the QTD for
- * control transfers.
- */
-uint8_t read_data_toggle(ifxusb_hc_regs_t *_hc_regs)
-{
- hctsiz_data_t hctsiz;
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- return(hctsiz.b.pid);
-}
-
-
-static void release_channel_dump(ifxhcd_hc_t *ifxhc,
- struct urb *urb,
- ifxhcd_epqh_t *epqh,
- ifxhcd_urbd_t *urbd,
- ifxhcd_halt_status_e halt_status)
-{
- #ifdef __DEBUG__
- printk(KERN_INFO);
- switch (halt_status)
- {
- case HC_XFER_NO_HALT_STATUS:
- printk("HC_XFER_NO_HALT_STATUS");break;
- case HC_XFER_URB_COMPLETE:
- printk("HC_XFER_URB_COMPLETE");break;
- case HC_XFER_AHB_ERR:
- printk("HC_XFER_AHB_ERR");break;
- case HC_XFER_STALL:
- printk("HC_XFER_STALL");break;
- case HC_XFER_BABBLE_ERR:
- printk("HC_XFER_BABBLE_ERR");break;
- case HC_XFER_XACT_ERR:
- printk("HC_XFER_XACT_ERR");break;
- case HC_XFER_URB_DEQUEUE:
- printk("HC_XFER_URB_DEQUEUE");break;
- case HC_XFER_FRAME_OVERRUN:
- printk("HC_XFER_FRAME_OVERRUN");break;
- case HC_XFER_DATA_TOGGLE_ERR:
- printk("HC_XFER_DATA_TOGGLE_ERR");break;
- case HC_XFER_NAK:
- printk("HC_XFER_NAK");break;
- case HC_XFER_COMPLETE:
- printk("HC_XFER_COMPLETE");break;
- default:
- printk("KNOWN");break;
- }
- if(ifxhc)
- printk("Ch %d %s%s S%d " , ifxhc->hc_num
- ,(ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL)?"CTRL-":
- ((ifxhc->ep_type == IFXUSB_EP_TYPE_BULK)?"BULK-":
- ((ifxhc->ep_type == IFXUSB_EP_TYPE_INTR)?"INTR-":
- ((ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)?"ISOC-":"????"
- )
- )
- )
- ,(ifxhc->is_in)?"IN":"OUT"
- ,(ifxhc->split)
- );
- else
- printk(" [NULL HC] ");
- printk("urb=%p epqh=%p urbd=%p\n",urb,epqh,urbd);
-
- if(urb)
- {
- printk(KERN_INFO " Device address: %d\n", usb_pipedevice(urb->pipe));
- printk(KERN_INFO " Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
- (usb_pipein(urb->pipe) ? "IN" : "OUT"));
- printk(KERN_INFO " Endpoint type: %s\n",
- ({char *pipetype;
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL: pipetype = "CTRL"; break;
- case PIPE_BULK: pipetype = "BULK"; break;
- case PIPE_INTERRUPT: pipetype = "INTR"; break;
- case PIPE_ISOCHRONOUS: pipetype = "ISOC"; break;
- default: pipetype = "????"; break;
- }; pipetype;}));
- printk(KERN_INFO " Speed: %s\n",
- ({char *speed;
- switch (urb->dev->speed) {
- case USB_SPEED_HIGH: speed = "HS"; break;
- case USB_SPEED_FULL: speed = "FS"; break;
- case USB_SPEED_LOW: speed = "LS"; break;
- default: speed = "????"; break;
- }; speed;}));
- printk(KERN_INFO " Max packet size: %d\n",
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
- printk(KERN_INFO " Data buffer length: %d\n", urb->transfer_buffer_length);
- printk(KERN_INFO " Transfer buffer: %p, Transfer DMA: %p\n",
- urb->transfer_buffer, (void *)urb->transfer_dma);
- printk(KERN_INFO " Setup buffer: %p, Setup DMA: %p\n",
- urb->setup_packet, (void *)urb->setup_dma);
- printk(KERN_INFO " Interval: %d\n", urb->interval);
- switch (urb->status)
- {
- case HC_XFER_NO_HALT_STATUS:
- printk(KERN_INFO " STATUS:HC_XFER_NO_HALT_STATUS\n");break;
- case HC_XFER_URB_COMPLETE:
- printk(KERN_INFO " STATUS:HC_XFER_URB_COMPLETE\n");break;
- case HC_XFER_AHB_ERR:
- printk(KERN_INFO " STATUS:HC_XFER_AHB_ERR\n");break;
- case HC_XFER_STALL:
- printk(KERN_INFO " STATUS:HC_XFER_STALL\n");break;
- case HC_XFER_BABBLE_ERR:
- printk(KERN_INFO " STATUS:HC_XFER_BABBLE_ERR\n");break;
- case HC_XFER_XACT_ERR:
- printk(KERN_INFO " STATUS:HC_XFER_XACT_ERR\n");break;
- case HC_XFER_URB_DEQUEUE:
- printk(KERN_INFO " STATUS:HC_XFER_URB_DEQUEUE\n");break;
- case HC_XFER_FRAME_OVERRUN:
- printk(KERN_INFO " STATUS:HC_XFER_FRAME_OVERRUN\n");break;
- case HC_XFER_DATA_TOGGLE_ERR:
- printk(KERN_INFO " STATUS:HC_XFER_DATA_TOGGLE_ERR\n");break;
- case HC_XFER_COMPLETE:
- printk(KERN_INFO " STATUS:HC_XFER_COMPLETE\n");break;
- default:
- printk(KERN_INFO " STATUS:KNOWN\n");break;
- }
- }
- #endif
-}
-
-
-static void release_channel(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxhcd_halt_status_e _halt_status)
-{
- ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[_ifxhc->hc_num];
- struct urb *urb = NULL;
- ifxhcd_epqh_t *epqh = NULL;
- ifxhcd_urbd_t *urbd = NULL;
-
- IFX_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n",
- __func__, _ifxhc->hc_num, _halt_status);
-
- epqh=_ifxhc->epqh;
-
- if(!epqh)
- IFX_ERROR("%s epqh=null\n",__func__);
- else
- {
- urbd=epqh->urbd;
- if(!urbd)
- IFX_ERROR("%s urbd=null\n",__func__);
- else
- {
- urb=urbd->urb;
- if(!urb)
- IFX_ERROR("%s urb =null\n",__func__);
- else {
- /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
- unsigned toggle = (read_data_toggle(hc_regs) == IFXUSB_HC_PID_DATA0)? 0: 1;
- usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), usb_pipeout(urb->pipe), toggle);
- }
- }
- //epqh->data_toggle = read_data_toggle(hc_regs);
-
- }
-
- switch (_halt_status)
- {
- case HC_XFER_NO_HALT_STATUS:
- IFX_ERROR("%s: No halt_status, channel %d\n", __func__, _ifxhc->hc_num);
- break;
- case HC_XFER_COMPLETE:
- IFX_ERROR("%s: Inavalid halt_status HC_XFER_COMPLETE, channel %d\n", __func__, _ifxhc->hc_num);
- break;
- case HC_XFER_URB_COMPLETE:
- case HC_XFER_URB_DEQUEUE:
- case HC_XFER_AHB_ERR:
- case HC_XFER_XACT_ERR:
- case HC_XFER_FRAME_OVERRUN:
- if(urbd && urb) {
- /* == 20110803 AVM/WK FIX set status, if still in progress == */
- if (urb->status == -EINPROGRESS) {
- switch (_halt_status) {
- case HC_XFER_URB_COMPLETE:
- urb->status = 0;
- break;
- case HC_XFER_URB_DEQUEUE:
- urb->status = -ECONNRESET;
- break;
- case HC_XFER_AHB_ERR:
- case HC_XFER_XACT_ERR:
- case HC_XFER_FRAME_OVERRUN:
- urb->status = -EPROTO;
- break;
- default:
- break;
- }
- }
- /*== AVM/BC 20101111 Deferred Complete ==*/
- defer_ifxhcd_complete_urb(_ifxhcd, urbd, urb->status);
- }
- else
- {
- IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
- release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
- }
- if(epqh)
- ifxhcd_epqh_idle(_ifxhcd, epqh);
- else
- {
- IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
- release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
- }
-
- list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
- ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
- break;
- case HC_XFER_STALL:
- release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
- if(urbd)
- /*== AVM/BC 20101111 Deferred Complete ==*/
- defer_ifxhcd_complete_urb(_ifxhcd, urbd, -EPIPE);
- else
- IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
- if(epqh)
- {
-// epqh->data_toggle = 0;
- ifxhcd_epqh_idle(_ifxhcd, epqh);
- }
- else
- IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
- list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
- ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
- break;
- case HC_XFER_NAK:
- release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
- if(urbd)
- {
- //ifxhcd_complete_urb(_ifxhcd, urbd, -ETIMEDOUT);
- urb->status = 0;
- /*== AVM/BC 20101111 Deferred Complete ==*/
- defer_ifxhcd_complete_urb(_ifxhcd, urbd, urb->status);
- }
- else
- IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
- if(epqh)
- ifxhcd_epqh_idle(_ifxhcd, epqh);
- else
- IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
- list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
- ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
- break;
- case HC_XFER_BABBLE_ERR:
- case HC_XFER_DATA_TOGGLE_ERR:
- release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
- if(urbd)
- /*== AVM/BC 20101111 Deferred Complete ==*/
- defer_ifxhcd_complete_urb(_ifxhcd, urbd, -EOVERFLOW);
- else
- IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
- if(epqh)
- ifxhcd_epqh_idle(_ifxhcd, epqh);
- else
- IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
- list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
- ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
- break;
- }
- select_eps(_ifxhcd);
-}
-
-/*
- * Updates the state of the URB after a Transfer Complete interrupt on the
- * host channel. Updates the actual_length field of the URB based on the
- * number of bytes transferred via the host channel. Sets the URB status
- * if the data transfer is finished.
- *
- * @return 1 if the data transfer specified by the URB is completely finished,
- * 0 otherwise.
- */
-static int update_urb_state_xfer_comp(ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- struct urb *_urb,
- ifxhcd_urbd_t *_urbd)
-{
- int xfer_done = 0;
-
- if (_ifxhc->is_in)
- {
- hctsiz_data_t hctsiz;
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- _urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- if ((hctsiz.b.xfersize != 0) || (_urb->actual_length >= _urb->transfer_buffer_length))
- {
- xfer_done = 1;
- _urb->status = 0;
- /* 20110805 AVM/WK Workaround: catch overflow error here, hardware does not */
- if (_urb->actual_length > _urb->transfer_buffer_length) {
- _urb->status = -EOVERFLOW;
- }
- #if 0
- if (_urb->actual_length < _urb->transfer_buffer_length && _urb->transfer_flags & URB_SHORT_NOT_OK)
- _urb->status = -EREMOTEIO;
- #endif
- }
-
- }
- else
- {
- if (_ifxhc->split)
- _urb->actual_length += _ifxhc->ssplit_out_xfer_count;
- else
- _urb->actual_length += _ifxhc->xfer_len;
-
- if (_urb->actual_length >= _urb->transfer_buffer_length)
- {
- /*== AVM/BC WK 20110421 ZERO PACKET Workaround ==*/
- if ((_ifxhc->short_rw == 1) && ( _ifxhc->xfer_len > 0) && ( _ifxhc->xfer_len % _ifxhc->mps == 0 ))
- {
- _ifxhc->short_rw = 0;
- //Transfer not finished. Another iteration for ZLP.
- }
- else
- {
- xfer_done = 1;
- }
- _urb->status = 0;
- }
- }
-
- #ifdef __DEBUG__
- {
- hctsiz_data_t hctsiz;
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- IFX_DEBUGPL(DBG_HCDV, "IFXUSB: %s: %s, channel %d\n",
- __func__, (_ifxhc->is_in ? "IN" : "OUT"), _ifxhc->hc_num);
- IFX_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", _ifxhc->xfer_len);
- IFX_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize);
- IFX_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
- _urb->transfer_buffer_length);
- IFX_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", _urb->actual_length);
- }
- #endif
- return xfer_done;
-}
-
-/*== AVM/BC 20101111 Function called with Lock ==*/
-
-void complete_channel(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxhcd_urbd_t *_urbd)
-{
- ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[_ifxhc->hc_num];
- struct urb *urb = NULL;
- ifxhcd_epqh_t *epqh = NULL;
- int urb_xfer_done;
-
- IFX_DEBUGPL(DBG_HCD, "--Complete Channel %d : \n", _ifxhc->hc_num);
-
- if(!_urbd)
- {
- IFX_ERROR("ERROR %s():%d urbd=%p\n",__func__,__LINE__,_urbd);
- return;
- }
-
- urb = _urbd->urb;
- epqh = _urbd->epqh;
-
- if(!urb || !epqh)
- {
- IFX_ERROR("ERROR %s():%d urb=%p epqh=%p\n",__func__,__LINE__,urb,epqh);
- return;
- }
-
- _ifxhc->do_ping=0;
-
- if (_ifxhc->split)
- _ifxhc->split = 1;
-
- switch (epqh->ep_type)
- {
- case IFXUSB_EP_TYPE_CTRL:
- switch (_ifxhc->control_phase)
- {
- case IFXHCD_CONTROL_SETUP:
- IFX_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
- if (_urbd->xfer_len > 0)
- {
- _ifxhc->control_phase = IFXHCD_CONTROL_DATA;
- _ifxhc->is_in = _urbd->is_in;
- _ifxhc->xfer_len = _urbd->xfer_len;
- #if defined(__UNALIGNED_BUFFER_ADJ__)
- if(epqh->using_aligned_buf)
- _ifxhc->xfer_buff = epqh->aligned_buf;
- else
- #endif
- _ifxhc->xfer_buff = _urbd->xfer_buff;
- }
- else
- {
- _ifxhc->control_phase = IFXHCD_CONTROL_STATUS;
- _ifxhc->is_in = 1;
- _ifxhc->xfer_len = 0;
- _ifxhc->xfer_buff = _ifxhcd->status_buf;
- }
- if(_ifxhc->is_in)
- _ifxhc->short_rw =0;
- else
- _ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
- _ifxhc->xfer_count = 0;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- /*== AVM/BC 20101111 Lock not needed ==*/
- process_channels_sub(_ifxhcd);
- break;
- case IFXHCD_CONTROL_DATA:
- urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
- if (urb_xfer_done)
- {
- _ifxhc->control_phase = IFXHCD_CONTROL_STATUS;
- _ifxhc->is_in = (_urbd->is_in)?0:1;
- _ifxhc->xfer_len = 0;
- _ifxhc->xfer_count = 0;
- _ifxhc->xfer_buff = _ifxhcd->status_buf;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
- if(_ifxhc->is_in)
- _ifxhc->short_rw =0;
- else
- _ifxhc->short_rw =1;
- }
- else // continue
- {
- _ifxhc->xfer_len = _urbd->xfer_len - urb->actual_length;
- _ifxhc->xfer_count = urb->actual_length;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- _ifxhc->data_pid_start = read_data_toggle(hc_regs);
- }
- /*== AVM/BC 20101111 Lock not needed ==*/
- process_channels_sub(_ifxhcd);
- break;
- case IFXHCD_CONTROL_STATUS:
- if (urb->status == -EINPROGRESS)
- urb->status = 0;
- release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
- break;
- }
- break;
- case IFXUSB_EP_TYPE_BULK:
- IFX_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
- urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
- if (urb_xfer_done)
- release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
- else
- {
- _ifxhc->xfer_len = _urbd->xfer_len - urb->actual_length;
- _ifxhc->xfer_count = urb->actual_length;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- _ifxhc->data_pid_start = read_data_toggle(hc_regs);
- /*== AVM/BC 20101111 Lock not needed ==*/
- process_channels_sub(_ifxhcd);
- }
- break;
- case IFXUSB_EP_TYPE_INTR:
- urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
- release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
- break;
- case IFXUSB_EP_TYPE_ISOC:
-// if (_urbd->isoc_split_pos == IFXUSB_HCSPLIT_XACTPOS_ALL)
-// halt_status = update_isoc_urb_state(_ifxhcd, _ifxhc, hc_regs, _urbd, HC_XFER_COMPLETE);
-// complete_periodic_xfer(_ifxhcd, _ifxhc, hc_regs, _urbd, halt_status);
- urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
- release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
- break;
- }
-}
-
-
-
-void showint(uint32_t val_hcint
- ,uint32_t val_hcintmsk
- ,uint32_t val_hctsiz)
-{
-#ifdef __DEBUG__
- hcint_data_t hcint = {.d32 = val_hcint};
- hcint_data_t hcintmsk = {.d32 = val_hcintmsk};
-
- printk(KERN_INFO " WITH FLAG: Sz:%08x I:%08X/M:%08X %s%s%s%s%s%s%s%s%s%s\n"
- ,val_hctsiz,hcint.d32 ,hcintmsk.d32
- ,(hcint.b.datatglerr || hcintmsk.b.datatglerr)?
- (
- (hcint.b.datatglerr && hcintmsk.b.datatglerr)?"datatglerr[*/*] ":
- (
- (hcint.b.datatglerr)?"datatglerr[*/] ":"datatglerr[/*] "
- )
- )
- :""
- ,(hcint.b.frmovrun || hcintmsk.b.frmovrun)?
- (
- (hcint.b.frmovrun && hcintmsk.b.frmovrun)?"frmovrun[*/*] ":
- (
- (hcint.b.frmovrun)?"frmovrun[*/] ":"frmovrun[/*] "
- )
- )
- :""
- ,(hcint.b.bblerr || hcintmsk.b.bblerr)?
- (
- (hcint.b.bblerr && hcintmsk.b.bblerr)?"bblerr[*/*] ":
- (
- (hcint.b.bblerr)?"bblerr[*/] ":"bblerr[/*] "
- )
- )
- :""
- ,(hcint.b.xacterr || hcintmsk.b.xacterr)?
- (
- (hcint.b.xacterr && hcintmsk.b.xacterr)?"xacterr[*/*] ":
- (
- (hcint.b.xacterr)?"xacterr[*/] ":"xacterr[/*] "
- )
- )
- :""
- ,(hcint.b.nyet || hcintmsk.b.nyet)?
- (
- (hcint.b.nyet && hcintmsk.b.nyet)?"nyet[*/*] ":
- (
- (hcint.b.nyet)?"nyet[*/] ":"nyet[/*] "
- )
- )
- :""
- ,(hcint.b.nak || hcintmsk.b.nak)?
- (
- (hcint.b.nak && hcintmsk.b.nak)?"nak[*/*] ":
- (
- (hcint.b.nak)?"nak[*/] ":"nak[/*] "
- )
- )
- :""
- ,(hcint.b.ack || hcintmsk.b.ack)?
- (
- (hcint.b.ack && hcintmsk.b.ack)?"ack[*/*] ":
- (
- (hcint.b.ack)?"ack[*/] ":"ack[/*] "
- )
- )
- :""
- ,(hcint.b.stall || hcintmsk.b.stall)?
- (
- (hcint.b.stall && hcintmsk.b.stall)?"stall[*/*] ":
- (
- (hcint.b.stall)?"stall[*/] ":"stall[/*] "
- )
- )
- :""
- ,(hcint.b.ahberr || hcintmsk.b.ahberr)?
- (
- (hcint.b.ahberr && hcintmsk.b.ahberr)?"ahberr[*/*] ":
- (
- (hcint.b.ahberr)?"ahberr[*/] ":"ahberr[/*] "
- )
- )
- :""
- ,(hcint.b.xfercomp || hcintmsk.b.xfercomp)?
- (
- (hcint.b.xfercomp && hcintmsk.b.xfercomp)?"xfercomp[*/*] ":
- (
- (hcint.b.xfercomp)?"xfercomp[*/] ":"xfercomp[/*] "
- )
- )
- :""
- );
-#endif
-}
-
-
-extern void ifxhcd_hc_dumb_rx(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc,uint8_t *dump_buf);
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_ctrlbulk_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _ifxhc->do_ping = 0;
-
- if(_ifxhc->halt_status == HC_XFER_NAK)
- {
- if(_ifxhc->nak_retry_r)
- {
- _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- _ifxhc->nak_retry--;
- if(_ifxhc->nak_retry)
- {
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _ifxhc->wait_for_sof = 1;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- {
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
- }
- }
- else
- {
- _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _ifxhc->wait_for_sof = 1;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
-
- if (hcint.b.xfercomp)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- return 1;
- }
- else if (hcint.b.stall)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- // ZLP shortcut
- #if 0
- if(hctsiz.b.pktcnt==0)
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- else
- #endif
- {
- // Stall FIFO compensation.
- #if 0
- int sz1,sz2;
- sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
- sz2*=_ifxhc->mps;
- sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
- sz2-=sz1;
- if(sz2)
- ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
- #endif
- _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- }
- return 1;
- }
- else if (hcint.b.bblerr)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
-
- // ZLP shortcut
- #if 0
- if(hctsiz.b.pktcnt==0)
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- else
- #endif
- _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- return 1;
- }
- else if (hcint.b.xacterr)
- {
- // ZLP shortcut
- #if 1
- if(hctsiz.b.pktcnt==0)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- else
- #endif
- {
- _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-
- /* 20110803 AVM/WK FIX: Reset error count on any handshake */
- if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
- _urbd->error_count = 1;
- } else {
- _urbd->error_count++;
- }
-
- if (_urbd->error_count >= 3)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->wait_for_sof = 1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- }
- return 1;
- }
- else if(hcint.b.datatglerr )
- {
- _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- #if 1
- if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
- else
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
- _ifxhc->wait_for_sof = 1;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- #else
- release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
- #endif
- return 1;
- }
- else if(hcint.b.frmovrun )
- {
-IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT0 FRMOVRUN [should be Period only]\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
- return 1;
- }
- else if(hcint.b.nyet )
- {
-IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT0 NYET [should be Out only]\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_ctrlbulk_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
- int out_nak_enh = 0;
-
-#ifdef __DEBUG__
-static int first=0;
-#endif
-
- if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- out_nak_enh = 1;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-
-#ifdef __DEBUG__
-if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
- &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
-{
- showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- first=1;
- printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
- ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
- ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
- ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
- ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
-
- printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
- ,_urbd->urb->actual_length
- ,_ifxhc->start_pkt_count
- ,hctsiz.b.pktcnt
- ,_urbd->xfer_len);
-}
-#endif
-
- if(_ifxhc->halt_status == HC_XFER_NAK)
- {
- if(_ifxhc->nak_retry_r)
- {
- _ifxhc->nak_retry--;
- if(_ifxhc->nak_retry)
- {
- if(_ifxhc->xfer_len!=0)
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _ifxhc->wait_for_sof = 1;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- {
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
- }
- }
- else
- {
- if(_ifxhc->xfer_len!=0)
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _ifxhc->wait_for_sof = 1;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
-
- if (hcint.b.xfercomp)
- {
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _urbd->error_count =0;
- if(_ifxhc->xfer_len==0 && !hcint.b.ack && hcint.b.nak)
- {
- // Walkaround: When sending ZLP and receive NAK but also issue CMPT intr
- // Solution: NoSplit: Resend at next SOF
- // Split : Resend at next SOF with SSPLIT
- if(hcint.b.nyet && !out_nak_enh)
- _ifxhc->do_ping = 1;
- else
- _ifxhc->do_ping = 0;
- _ifxhc->xfer_len = 0;
- _ifxhc->xfer_count = 0;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- _ifxhc->wait_for_sof = 1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- {
- _ifxhc->wait_for_sof = 0;
- _ifxhc->do_ping = 0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- return 1;
- }
- else if (hcint.b.stall)
- {
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
-
- // ZLP shortcut
- #if 1
- if(hctsiz.b.pktcnt==0)
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- else
- #endif
- {
- if(_ifxhc->xfer_len!=0)
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- }
- return 1;
- }
- else if (hcint.b.xacterr)
- {
- // ZLP shortcut
- #if 1
- if(hctsiz.b.pktcnt==0)
- {
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- else
- #endif
- {
- if(_ifxhc->xfer_len!=0)
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-
- if (hcint.b.nak || hcint.b.nyet || hcint.b.ack)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =1;
- enable_hc_int(_hc_regs,ack);
- enable_hc_int(_hc_regs,nak);
- enable_hc_int(_hc_regs,nyet);
- if(!out_nak_enh)
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- {
- _urbd->error_count ++ ;
- if (_urbd->error_count == 3)
- {
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- enable_hc_int(_hc_regs,ack);
- enable_hc_int(_hc_regs,nak);
- enable_hc_int(_hc_regs,nyet);
- _ifxhc->wait_for_sof =1;
- if(!out_nak_enh)
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- }
- }
- return 1;
- }
- else if(hcint.b.bblerr )
- {
-IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 BABBLE [should be IN only]\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _ifxhc->do_ping = 0;
- if(_ifxhc->xfer_len!=0)
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- return 1;
- }
- else if(hcint.b.nak || hcint.b.nyet)
- {
- if(!out_nak_enh)
- {
- // ZLP shortcut
- #if 1
- if(hctsiz.b.pktcnt==0)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- else
- #endif
- {
- if(!out_nak_enh)
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- if(_ifxhc->xfer_len!=0)
- {
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- }
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _ifxhc->wait_for_sof = 1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
- }
- else if(hcint.b.datatglerr )
- {
-IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 DATATGLERR [should be IN only]\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
- return 1;
- }
- else if(hcint.b.frmovrun )
- {
-IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 FRMOVRUN [should be PERIODIC only]\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
- return 1;
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_intr_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _ifxhc->do_ping =0;
-
- if(_ifxhc->halt_status == HC_XFER_NAK)
- {
- if(_ifxhc->nak_retry_r)
- {
- _ifxhc->nak_retry--;
- if(_ifxhc->nak_retry)
- {
- if(_ifxhc->xfer_len!=0)
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _ifxhc->wait_for_sof = 1;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- {
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
- }
- }
- else
- {
- if(_ifxhc->xfer_len!=0)
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _ifxhc->wait_for_sof = 1;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
-
- if(hcint.b.xfercomp )
- {
- _urbd->error_count =0;
- //restart INTR immediately
- #if 1
- if(hctsiz.b.pktcnt>0)
- {
- // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- #endif
- {
- _ifxhc->wait_for_sof =0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- return 1;
- }
- else if (hcint.b.stall)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
-
- // Don't care shortcut
- #if 0
- if(hctsiz.b.pktcnt==0)
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- else
- #endif
- {
- // Stall FIFO compensation.
- #if 0
- int sz1,sz2;
- sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
- sz2*=_ifxhc->mps;
- sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
- sz2-=sz1;
- if(sz2)
- ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
- #endif
- _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- }
- return 1;
- }
-
-
- else if (hcint.b.bblerr)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
-
- // Don't care shortcut
- #if 0
- if(hctsiz.b.pktcnt==0)
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- else
- #endif
- {
- _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- }
- return 1;
- }
- else if (hcint.b.nak || hcint.b.datatglerr || hcint.b.frmovrun)
- {
- _urbd->error_count =0;
- //restart INTR immediately
- #if 1
- if(hctsiz.b.pktcnt>0)
- {
- // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- #endif
- {
- _ifxhc->wait_for_sof =0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- return 1;
- }
- else if (hcint.b.xacterr)
- {
- // ZLP shortcut
- #if 1
- if(hctsiz.b.pktcnt==0)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- else
- #endif
- {
- /* 20110803 AVM/WK FIX: Reset error count on any handshake */
- if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
- _urbd->error_count = 1;
- } else {
- _urbd->error_count++;
- }
-
- if(_urbd->error_count>=3)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- }
- return 1;
- }
- else if(hcint.b.nyet )
- {
-IFX_WARN("%s() %d Warning INTR IN SPLIT0 NYET [should be OUT only]\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- return 1;
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_intr_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
- int out_nak_enh = 0;
-
- if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- out_nak_enh = 1;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-
- if(_ifxhc->halt_status == HC_XFER_NAK)
- {
- if(_ifxhc->nak_retry_r)
- {
- _ifxhc->nak_retry--;
- if(_ifxhc->nak_retry)
- {
- if(_ifxhc->xfer_len!=0)
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _ifxhc->wait_for_sof = 1;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- {
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
- }
- }
- else
- {
- if(_ifxhc->xfer_len!=0)
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _ifxhc->wait_for_sof = 1;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
-
- if(hcint.b.xfercomp )
- {
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _urbd->error_count =0;
- //restart INTR immediately
- #if 0
- if(hctsiz.b.pktcnt>0)
- {
- // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- if(hcint.b.nyet && !out_nak_enh )
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- #endif
- {
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- return 1;
- }
- else if (hcint.b.stall)
- {
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nyet);
- disable_hc_int(_hc_regs,nak);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
-
- // Don't care shortcut
- #if 0
- if(hctsiz.b.pktcnt==0)
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- else
- #endif
- {
- if(_ifxhc->xfer_len!=0)// !_ifxhc->is_in
- _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- }
- return 1;
- }
- else if(hcint.b.nak || hcint.b.frmovrun )
- {
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nyet);
- disable_hc_int(_hc_regs,nak);
- _urbd->error_count =0;
- //restart INTR immediately
- #if 0
- if(hctsiz.b.pktcnt>0)
- {
- // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- if(!out_nak_enh )
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- #endif
- {
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- return 1;
- }
- else if(hcint.b.xacterr )
- {
- // ZLP shortcut
- #if 1
- if(hctsiz.b.pktcnt==0)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- else
- #endif
- {
- /* 20110803 AVM/WK FIX: Reset error count on any handshake */
- if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
- _urbd->error_count = 1;
- } else {
- _urbd->error_count++;
- }
-
- if(_urbd->error_count>=3)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- //_ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- //if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- _ifxhc->wait_for_sof=1;
- if(!out_nak_enh )
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
-
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- }
- return 1;
- }
- else if(hcint.b.bblerr )
- {
-IFX_WARN("%s() %d Warning INTR OUT SPLIT0 BABBLEERR [should be IN only]\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- return 1;
- }
- else if(hcint.b.datatglerr )
- {
-IFX_WARN("%s() %d Warning INTR OUT SPLIT0 DATATGLERR\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
- return 1;
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_isoc_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- #if defined(__EN_ISOC__)
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-
- if (hcint.b.xfercomp || hcint.b.frmovrun)
- {
- _urbd->error_count=0;
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _ifxhc->wait_for_sof = 0;
- if (hcint.b.xfercomp)
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- else
- release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
- }
- else if (hcint.b.xacterr || hcint.b.bblerr)
- {
- #ifndef VR9Skip
- if(hctsiz.b.pktcnt==0)
- {
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- else
- {
- int sz1,sz2;
- sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
- sz2*=_ifxhc->mps;
- sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
- sz2-=sz1;
- if(sz2)
- ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
- _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _urbd->error_count++;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->wait_for_sof = 1;
- enable_hc_int(_hc_regs,ack);
- enable_hc_int(_hc_regs,nak);
- enable_hc_int(_hc_regs,nyet);
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- }
- #endif
- }
- else if(hcint.b.datatglerr )
- {
- warning
- }
- else if(hcint.b.stall )
- {
- warning
- }
- #else
- #endif
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_isoc_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- #if defined(__EN_ISOC__)
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
- int out_nak_enh = 0;
-
- if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- out_nak_enh = 1;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-
- if (hcint.b.xfercomp)
- {
- _urbd->error_count=0;
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _ifxhc->wait_for_sof = 0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- return 1;
- }
- else if (hcint.b.frmovrun)
- {
- #ifndef VR9Skip
- _urbd->error_count=0;
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
- #endif
- }
- else if(hcint.b.datatglerr )
- {
- warning
- }
- else if(hcint.b.bblerr )
- {
- #ifndef VR9Skip
- if(hctsiz.b.pktcnt==0)
- {
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- else
- {
- int sz1,sz2;
- sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
- sz2*=_ifxhc->mps;
- sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
- sz2-=sz1;
- if(sz2)
- ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
- _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- _urbd->error_count++;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- }
- else
- {
- _ifxhc->wait_for_sof = 1;
- enable_hc_int(_hc_regs,ack);
- enable_hc_int(_hc_regs,nak);
- enable_hc_int(_hc_regs,nyet);
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- }
- #endif
- }
- else if(hcint.b.xacterr )
- {
- if(hctsiz.b.pktcnt==0)
- {
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- return 1;
- }
- _urbd->error_count++;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->wait_for_sof = 1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
- else if(hcint.b.stall )
- {
- warning
- }
- #else
- #endif
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_ctrlbulk_rx_ssplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
-
- _ifxhc->do_ping =0;
-
- if (hcint.b.ack)
- {
- _urbd->error_count=0;
- _ifxhc->split=2;
- _ifxhc->wait_for_sof = 8;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if (hcint.b.nak)
- {
- _ifxhc->wait_for_sof = 1;
- _urbd->error_count = 0;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if (hcint.b.xacterr)
- {
- _urbd->error_count++;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->wait_for_sof =1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
- else if(hcint.b.bblerr )
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- return 1;
- }
- else if(hcint.b.stall )
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- return 1;
- }
- else if(hcint.b.datatglerr )
- {
-IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 HC_XFER_DATA_TOGGLE_ERR\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
- return 1;
- }
- else if(hcint.b.frmovrun )
- {
-IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 HC_XFER_FRAME_OVERRUN\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
- return 1;
- }
- else if(hcint.b.nyet )
- {
-IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 NYET\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- }
- else if(hcint.b.xfercomp )
- {
-IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 COMPLETE\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_ctrlbulk_tx_ssplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
- int out_nak_enh = 0;
-
-#ifdef __DEBUG__
-static int first=0;
-#endif
-
- if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- out_nak_enh = 1;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
-
-#ifdef __DEBUG__
- if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
- &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
- {
- showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- first=1;
- printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
- ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
- ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
- ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
- ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
-
- printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
- ,_urbd->urb->actual_length
- ,_ifxhc->start_pkt_count
- ,hctsiz.b.pktcnt
- ,_urbd->xfer_len);
- }
-#endif
-
- if (hcint.b.ack )
- {
- _urbd->error_count=0;
- if (_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK || _ifxhc->control_phase != IFXHCD_CONTROL_SETUP)
- _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
- _ifxhc->split=2;
- _ifxhc->wait_for_sof =8;
- _ifxhc->data_pid_start =read_data_toggle(_hc_regs);
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.nyet)
- {
-IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT1 NYET\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count=0;
- if (_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK || _ifxhc->control_phase != IFXHCD_CONTROL_SETUP)
- _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
- _ifxhc->split=2;
- _ifxhc->wait_for_sof =1;
- _ifxhc->data_pid_start =read_data_toggle(_hc_regs);
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.nak )
- {
- _ifxhc->wait_for_sof =1;
- if(!out_nak_enh )
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- _urbd->error_count =0;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.xacterr )
- {
- _urbd->error_count++;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->wait_for_sof =1;
- _ifxhc->do_ping =1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
- else if(hcint.b.datatglerr )
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
- return 1;
- }
- else if(hcint.b.bblerr )
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- return 1;
- }
- else if(hcint.b.stall )
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- return 1;
- }
- else if(hcint.b.frmovrun )
- {
-IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT1 HC_XFER_FRAME_OVERRUN\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- _ifxhc->do_ping =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
- return 1;
- }
- else if(hcint.b.xfercomp )
- {
- printk(KERN_INFO "%s() %d Warning CTRLBULK OUT SPLIT1 COMPLETE\n",__func__,__LINE__);
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_intr_rx_ssplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
-
- _ifxhc->do_ping =0;
-
- if (hcint.b.ack )
- {
- /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
- _ifxhc->nyet_count=0;
-
- _urbd->error_count=0;
- _ifxhc->split=2;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.nak )
- {
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- _urbd->error_count=0;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.xacterr )
- {
- hcchar_data_t hcchar;
- hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
- _urbd->error_count=hcchar.b.multicnt;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
- else if(hcint.b.stall )
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- return 1;
- }
- else if(hcint.b.bblerr )
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- return 1;
- }
- else if(hcint.b.frmovrun )
- {
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.datatglerr )
- {
-IFX_WARN( "%s() %d Warning INTR IN SPLIT1 DATATGLERR\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
- return 1;
- }
- else if(hcint.b.xfercomp )
- {
-IFX_WARN("%s() %d Warning INTR IN SPLIT1 COMPLETE\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_intr_tx_ssplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
- int out_nak_enh = 0;
-
- if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- out_nak_enh = 1;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
-
- if (hcint.b.ack )
- {
- /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
- _ifxhc->nyet_count=0;
-
- _urbd->error_count=0;
- _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
- _ifxhc->split=2;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.nyet)
- {
-IFX_WARN("%s() %d Warning INTR OUT SPLIT1 NYET\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count=0;
- _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
- _ifxhc->split=2;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.nak )
- {
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- _urbd->error_count =0;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.frmovrun )
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.xacterr )
- {
- hcchar_data_t hcchar;
- hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
- _urbd->error_count=hcchar.b.multicnt;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- enable_hc_int(_hc_regs,ack);
- enable_hc_int(_hc_regs,nak);
- enable_hc_int(_hc_regs,nyet);
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
- else if(hcint.b.datatglerr )
- {
-IFX_WARN("%s() %d Warning INTR IN SPLIT1 DATATGLERR\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
- return 1;
- }
- else if(hcint.b.bblerr )
- {
-IFX_WARN("%s() %d Warning INTR IN SPLIT1 BABBLEERR\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- return 1;
- }
- else if(hcint.b.stall )
- {
-IFX_WARN("%s() %d Warning INTR IN SPLIT1 STALL\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- _urbd->error_count =0;
- _ifxhc->wait_for_sof =0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- return 1;
- }
- else if(hcint.b.xfercomp )
- {
-IFX_WARN("%s() %d Warning INTR IN SPLIT1 COMPLETE\n",__func__,__LINE__);
-showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_isoc_rx_ssplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- if (hcint.b.ack )
- {
- Do Complete Split
- }
- else if(hcint.b.frmovrun )
- {
- Rewind Buffer Pointers
- Retry Start Split (in next b_interval ¡V 1 uF)
- }
- else if(hcint.b.datatglerr )
- {
- warning
- }
- else if(hcint.b.bblerr )
- {
- warning
- }
- else if(hcint.b.xacterr )
- {
- warning
- }
- else if(hcint.b.stall )
- {
- warning
- }
- else if(hcint.b.nak )
- {
- warning
- }
- else if(hcint.b.xfercomp )
- {
- warning
- }
- else if(hcint.b.nyet)
- {
- warning
- }
- #endif
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_isoc_tx_ssplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
- int out_nak_enh = 0;
-
- if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- out_nak_enh = 1;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- if (hcint.b.ack )
- {
- Do Next Start Split (in next b_interval ¡V 1 uF)
- }
- else if(hcint.b.frmovrun )
- {
- Do Next Transaction in next frame.
- }
- else if(hcint.b.datatglerr )
- {
- warning
- }
- else if(hcint.b.bblerr )
- {
- warning
- }
- else if(hcint.b.xacterr )
- {
- warning
- }
- else if(hcint.b.stall )
- {
- warning
- }
- else if(hcint.b.nak )
- {
- warning
- }
- else if(hcint.b.xfercomp )
- {
- warning
- }
- else if(hcint.b.nyet)
- {
- warning
- }
- #endif
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_ctrlbulk_rx_csplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
-
- _ifxhc->do_ping = 0;
-
- if (hcint.b.xfercomp)
- {
- _urbd->error_count =0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->split=1;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- return 1;
- }
- else if (hcint.b.nak)
- {
- _urbd->error_count=0;
-
- _ifxhc->split = 1;
- _ifxhc->wait_for_sof = 1;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.nyet)
- {
- _urbd->error_count=0;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- _ifxhc->wait_for_sof = 1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.stall || hcint.b.bblerr )
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- if (hcint.b.stall)
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- else if(hcint.b.bblerr )
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- return 1;
- }
- else if(hcint.b.xacterr )
- {
- _urbd->error_count++;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->split=1;
- _ifxhc->wait_for_sof = 1;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
- else if(hcint.b.datatglerr )
- {
- if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
- else
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
- _ifxhc->split=1;
- _ifxhc->wait_for_sof = 1;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.frmovrun )
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
- return 1;
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_ctrlbulk_tx_csplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
- int out_nak_enh = 0;
-
-#if 1
-static int first=0;
-#endif
-
- if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- out_nak_enh = 1;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
-
-#if 1
- if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
- &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
- {
- showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
- first=1;
- printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
- ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
- ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
- ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
- ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
-
- printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
- ,_urbd->urb->actual_length
- ,_ifxhc->start_pkt_count
- ,hctsiz.b.pktcnt
- ,_urbd->xfer_len);
- }
-#endif
-
- if(hcint.b.xfercomp )
- {
- _urbd->error_count=0;
- _ifxhc->split=1;
- _ifxhc->do_ping= 0;
- #if 0
- if(_ifxhc->xfer_len==0 && !hcint.b.ack && (hcint.b.nak || hcint.b.nyet))
- {
- // Walkaround: When sending ZLP and receive NYEY or NAK but also issue CMPT intr
- // Solution: NoSplit: Resend at next SOF
- // Split : Resend at next SOF with SSPLIT
- _ifxhc->xfer_len = 0;
- _ifxhc->xfer_count = 0;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- _ifxhc->wait_for_sof = 1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- else
- #endif
- {
- _ifxhc->wait_for_sof = 0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- }
- return 1;
- }
- else if(hcint.b.nak )
- {
- _urbd->error_count=0;
-
- _ifxhc->split = 1;
- _ifxhc->wait_for_sof = 1;
- if(!out_nak_enh )
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.nyet)
- {
- //Retry Complete Split
- // Issue Retry instantly on next SOF, without gothrough process_channels
- _urbd->error_count=0;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- _ifxhc->wait_for_sof = 1;
- _ifxhc->do_ping = 0;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.stall )
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->do_ping = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- return 1;
- }
- else if(hcint.b.xacterr )
- {
- _urbd->error_count++;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->do_ping = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->split=1;
- _ifxhc->wait_for_sof = 1;
- if(!out_nak_enh )
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
- else if(hcint.b.datatglerr )
- {
- if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
- else
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
- _ifxhc->split=1;
- _ifxhc->wait_for_sof = 1;
- if(!out_nak_enh )
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.frmovrun )
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->do_ping = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
- return 1;
- }
- else if(hcint.b.bblerr )
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->do_ping = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- return 1;
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_intr_rx_csplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _ifxhc->do_ping = 0;
-
- if (hcint.b.xfercomp )
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->split=1;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- return 1;
- }
- else if(hcint.b.nak )
- {
- _urbd->error_count=0;
- _ifxhc->split = 1;
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.nyet)
- {
- _urbd->error_count=0;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- _ifxhc->wait_for_sof = 0;
-
- /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
- _ifxhc->nyet_count++;
- if(_ifxhc->nyet_count > 2) {
- _ifxhc->split = 1;
- _ifxhc->nyet_count = 0;
- _ifxhc->wait_for_sof = 5;
- }
-
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.frmovrun || hcint.b.bblerr || hcint.b.stall )
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- if (hcint.b.stall)
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- else if(hcint.b.bblerr )
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- else if(hcint.b.frmovrun )
- release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
- return 1;
- }
- else if(hcint.b.xacterr )
- {
- hcchar_data_t hcchar;
- hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
- _urbd->error_count=hcchar.b.multicnt;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->split=1;
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
- else if(hcint.b.datatglerr )
- {
- if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
- else
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
- _ifxhc->split=1;
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_intr_tx_csplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
- int out_nak_enh = 0;
-
- if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- out_nak_enh = 1;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
-
- if(hcint.b.xfercomp )
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->split=1;
- _ifxhc->do_ping = 0;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- return 1;
- }
- else if(hcint.b.nak )
- {
- _urbd->error_count=0;
- _ifxhc->split = 1;
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- if(!out_nak_enh )
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.nyet)
- {
- _urbd->error_count=0;
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->do_ping = 0;
-
- /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
- _ifxhc->nyet_count++;
- if(_ifxhc->nyet_count > 2) {
- _ifxhc->split = 1;
- _ifxhc->nyet_count = 0;
- _ifxhc->wait_for_sof = 5;
- }
-
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.stall || hcint.b.frmovrun)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->do_ping = 0;
- if (hcint.b.stall)
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- else if(hcint.b.frmovrun )
- release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
- return 1;
- }
- else if(hcint.b.xacterr )
- {
- hcchar_data_t hcchar;
- hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
- _urbd->error_count=hcchar.b.multicnt;
- if(_urbd->error_count>=3)
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->do_ping = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
- }
- else
- {
- _ifxhc->split=1;
- _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
- if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
- if(!out_nak_enh )
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- }
- return 1;
- }
- else if(hcint.b.datatglerr )
- {
- if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
- else
- _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
- _ifxhc->split=1;
- if(!out_nak_enh )
- _ifxhc->do_ping =1;
- else
- _ifxhc->do_ping =0;
- _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
- _ifxhc->xfer_count = _urbd->urb->actual_length;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.bblerr )
- {
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->do_ping = 0;
- release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
- return 1;
- }
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_isoc_rx_csplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- if(hcint.b.xfercomp )
- {
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,nyet);
- _urbd->error_count=0;
- _ifxhc->wait_for_sof = 0;
- _ifxhc->split=1;
- complete_channel(_ifxhcd, _ifxhc, _urbd);
- return 1;
- }
- else if(hcint.b.nak )
- {
- Retry Start Split (in next b_interval ¡V 1 uF)
- }
- else if(hcint.b.nyet)
- {
- //Do Next Complete Split
- // Issue Retry instantly on next SOF, without gothrough process_channels
- _urbd->error_count=0;
- //disable_hc_int(_hc_regs,ack);
- //disable_hc_int(_hc_regs,nak);
- //disable_hc_int(_hc_regs,datatglerr);
- _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
- _ifxhc->wait_for_sof = 1;
- ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
- return 1;
- }
- else if(hcint.b.frmovrun || hcint.b.stall || hcint.b.bblerr)
- {
- _urbd->error_count=0;
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nyet);
- disable_hc_int(_hc_regs,nak);
- _ifxhc->wait_for_sof = 0;
-
- //if(hctsiz.b.pktcnt==0)
- //{
- // complete_channel(_ifxhcd, _ifxhc, _urbd);
- // return 1;
- //}
- //else
- // _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
- if (hcint.b.stall)
- release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
- else if(hcint.b.frmovrun )
- else if(hcint.b.bblerr )
- return 1;
- }
- else if(hcint.b.xacterr )
- {
- Rewind Buffer Pointers
- if (HCCHARn.EC = = 3) // ERR response received
- {
- Record ERR error
- Do Next Start Split (in next frame)
- }
- else
- {
- De-allocate Channel
- }
- }
- else if(hcint.b.datatglerr )
- {
- warning
- }
- else if(hcint.b.ack )
- {
- warning
- }
- #endif
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-static int32_t chhltd_isoc_tx_csplit(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
- hcint_data_t hcint;
- hcint_data_t hcintmsk;
- hctsiz_data_t hctsiz;
- int out_nak_enh = 0;
-
- if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
- out_nak_enh = 1;
-
- hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
- hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- warning
- #endif
- return 0;
-}
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-static int32_t handle_hc_chhltd_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- IFX_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: Channel Halted--\n", _ifxhc->hc_num);
-
- _ifxhc->halting = 0;
- _ifxhc->xfer_started = 0;
-
- if (_ifxhc->halt_status == HC_XFER_URB_DEQUEUE ||
- _ifxhc->halt_status == HC_XFER_AHB_ERR) {
- /*
- * Just release the channel. A dequeue can happen on a
- * transfer timeout. In the case of an AHB Error, the channel
- * was forced to halt because there's no way to gracefully
- * recover.
- */
- release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
- return 1;
- }
-
- if (_ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL || _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK)
- {
- if (_ifxhc->split==0)
- {
- if(_ifxhc->is_in)
- return (chhltd_ctrlbulk_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- else
- return (chhltd_ctrlbulk_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- }
- else if(_ifxhc->split==1)
- {
- if(_ifxhc->is_in)
- return (chhltd_ctrlbulk_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- else
- return (chhltd_ctrlbulk_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- }
- else if(_ifxhc->split==2)
- {
- if(_ifxhc->is_in)
- return (chhltd_ctrlbulk_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- else
- return (chhltd_ctrlbulk_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- }
- }
- else if(_ifxhc->ep_type == IFXUSB_EP_TYPE_INTR)
- {
- if (_ifxhc->split==0)
- {
- if(_ifxhc->is_in)
- return (chhltd_intr_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- else
- return (chhltd_intr_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- }
- else if(_ifxhc->split==1)
- {
- if(_ifxhc->is_in)
- return (chhltd_intr_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- else
- return (chhltd_intr_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- }
- else if(_ifxhc->split==2)
- {
- if(_ifxhc->is_in)
- return (chhltd_intr_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- else
- return (chhltd_intr_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- }
- }
- else if(_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
- {
- if (_ifxhc->split==0)
- {
- if(_ifxhc->is_in)
- return (chhltd_isoc_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- else
- return (chhltd_isoc_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- }
- else if(_ifxhc->split==1)
- {
- if(_ifxhc->is_in)
- return (chhltd_isoc_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- else
- return (chhltd_isoc_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- }
- else if(_ifxhc->split==2)
- {
- if(_ifxhc->is_in)
- return (chhltd_isoc_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- else
- return (chhltd_isoc_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
- }
- }
- return 0;
-}
-
-/*
- * Handles a host channel AHB error interrupt. This handler is only called in
- * DMA mode.
- */
-static void hc_other_intr_dump(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- #ifdef __DEBUG__
- hcchar_data_t hcchar;
- hcsplt_data_t hcsplt;
- hctsiz_data_t hctsiz;
- uint32_t hcdma;
- struct urb *urb = _urbd->urb;
- hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
- hcsplt.d32 = ifxusb_rreg(&_hc_regs->hcsplt);
- hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
- hcdma = ifxusb_rreg(&_hc_regs->hcdma);
-
- IFX_ERROR("Channel %d\n", _ifxhc->hc_num);
- IFX_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
- IFX_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
- IFX_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
- IFX_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
- (usb_pipein(urb->pipe) ? "IN" : "OUT"));
- IFX_ERROR(" Endpoint type: %s\n",
- ({char *pipetype;
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_CONTROL: pipetype = "CTRL"; break;
- case PIPE_BULK: pipetype = "BULK"; break;
- case PIPE_INTERRUPT: pipetype = "INTR"; break;
- case PIPE_ISOCHRONOUS: pipetype = "ISOC"; break;
- default: pipetype = "????"; break;
- }; pipetype;}));
- IFX_ERROR(" Speed: %s\n",
- ({char *speed;
- switch (urb->dev->speed) {
- case USB_SPEED_HIGH: speed = "HS"; break;
- case USB_SPEED_FULL: speed = "FS"; break;
- case USB_SPEED_LOW: speed = "LS"; break;
- default: speed = "????"; break;
- }; speed;}));
- IFX_ERROR(" Max packet size: %d\n",
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
- IFX_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length);
- IFX_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
- urb->transfer_buffer, (void *)urb->transfer_dma);
- IFX_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
- urb->setup_packet, (void *)urb->setup_dma);
- IFX_ERROR(" Interval: %d\n", urb->interval);
- #endif //__DEBUG__
-}
-
-/*
- * Handles a host channel ACK interrupt. This interrupt is enabled when
- * errors occur, and during Start Split transactions.
- */
-static int32_t handle_hc_ack_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- _urbd->error_count=0;
- if(_ifxhc->nak_countdown_r)
- {
- _ifxhc->nak_retry=_ifxhc->nak_retry_r;
- _ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
- }
- else
- disable_hc_int(_hc_regs,nak);
- disable_hc_int(_hc_regs,ack);
- return 1;
-}
-
-/*
- * Handles a host channel ACK interrupt. This interrupt is enabled when
- * errors occur, and during Start Split transactions.
- */
-static int32_t handle_hc_nak_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
-
- _urbd->error_count=0;
-
- if(_ifxhc->nak_countdown_r)
- {
- _ifxhc->nak_countdown--;
- if(!_ifxhc->nak_countdown)
- {
- _ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- ifxhcd_hc_halt(&_ifxhcd->core_if, _ifxhc, HC_XFER_NAK);
- }
- else
- enable_hc_int(_hc_regs,ack);
- }
- else
- {
- disable_hc_int(_hc_regs,ack);
- disable_hc_int(_hc_regs,nak);
- }
- return 1;
-}
-
-/*
- * Handles a host channel AHB error interrupt. This handler is only called in
- * DMA mode.
- */
-static int32_t handle_hc_ahberr_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- IFX_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
- "AHB Error--\n", _ifxhc->hc_num);
- hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
-
- ifxhcd_hc_halt(&_ifxhcd->core_if, _ifxhc, HC_XFER_AHB_ERR);
- return 1;
-}
-
-/*
- * Datatoggle
- */
-static int32_t handle_hc_datatglerr_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- IFX_ERROR( "--Host Channel %d Interrupt: "
- "DATATOGGLE Error--\n", _ifxhc->hc_num);
- hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
- disable_hc_int(_hc_regs,datatglerr);
- return 1;
-}
-
-
-
-/*
- * Interrupts which should not been triggered
- */
-static int32_t handle_hc_frmovrun_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- IFX_ERROR( "--Host Channel %d Interrupt: "
- "FrameOverRun Error--\n", _ifxhc->hc_num);
- hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
- disable_hc_int(_hc_regs,frmovrun);
- return 1;
-}
-
-static int32_t handle_hc_bblerr_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- IFX_ERROR( "--Host Channel %d Interrupt: "
- "BBL Error--\n", _ifxhc->hc_num);
- hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
- disable_hc_int(_hc_regs,bblerr);
- return 1;
-}
-
-static int32_t handle_hc_xacterr_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- IFX_ERROR( "--Host Channel %d Interrupt: "
- "XACT Error--\n", _ifxhc->hc_num);
- hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
- disable_hc_int(_hc_regs,xacterr);
- return 1;
-}
-
-static int32_t handle_hc_nyet_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- IFX_ERROR( "--Host Channel %d Interrupt: "
- "NYET--\n", _ifxhc->hc_num);
- hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
- _urbd->error_count=0;
- disable_hc_int(_hc_regs,nyet);
- return 1;
-}
-
-static int32_t handle_hc_stall_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- IFX_ERROR( "--Host Channel %d Interrupt: "
- "STALL--\n", _ifxhc->hc_num);
- hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
- disable_hc_int(_hc_regs,stall);
- return 1;
-}
-
-static int32_t handle_hc_xfercomp_intr(ifxhcd_hcd_t *_ifxhcd,
- ifxhcd_hc_t *_ifxhc,
- ifxusb_hc_regs_t *_hc_regs,
- ifxhcd_urbd_t *_urbd)
-{
- IFX_ERROR( "--Host Channel %d Interrupt: "
- "XFERCOMP--\n", _ifxhc->hc_num);
- hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
- disable_hc_int(_hc_regs,xfercomp);
- return 1;
-}
-
-
-
-/* This interrupt indicates that the specified host channels has a pending
- * interrupt. There are multiple conditions that can cause each host channel
- * interrupt. This function determines which conditions have occurred for this
- * host channel interrupt and handles them appropriately. */
-static int32_t handle_hc_n_intr (ifxhcd_hcd_t *_ifxhcd, uint32_t _num)
-{
- uint32_t hcintval,hcintmsk;
- hcint_data_t hcint;
- ifxhcd_hc_t *ifxhc;
- ifxusb_hc_regs_t *hc_regs;
- ifxhcd_urbd_t *urbd;
- unsigned long flags;
-
- int retval = 0;
-
- IFX_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num);
-
- /*== AVM/BC 20101111 Lock needed ==*/
- SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-
- ifxhc = &_ifxhcd->ifxhc[_num];
- hc_regs = _ifxhcd->core_if.hc_regs[_num];
-
- hcintval = ifxusb_rreg(&hc_regs->hcint);
- hcintmsk = ifxusb_rreg(&hc_regs->hcintmsk);
- hcint.d32 = hcintval & hcintmsk;
- IFX_DEBUGPL(DBG_HCDV, " 0x%08x & 0x%08x = 0x%08x\n",
- hcintval, hcintmsk, hcint.d32);
-
- urbd = list_entry(ifxhc->epqh->urbd_list.next, ifxhcd_urbd_t, urbd_list_entry);
-
- if (hcint.b.datatglerr)
- retval |= handle_hc_datatglerr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
- if (hcint.b.frmovrun)
- retval |= handle_hc_frmovrun_intr(_ifxhcd, ifxhc, hc_regs, urbd);
- if (hcint.b.bblerr)
- retval |= handle_hc_bblerr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
- if (hcint.b.xacterr)
- retval |= handle_hc_xacterr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
- if (hcint.b.nyet)
- retval |= handle_hc_nyet_intr(_ifxhcd, ifxhc, hc_regs, urbd);
- if (hcint.b.ack)
- retval |= handle_hc_ack_intr(_ifxhcd, ifxhc, hc_regs, urbd);
- if (hcint.b.nak)
- retval |= handle_hc_nak_intr(_ifxhcd, ifxhc, hc_regs, urbd);
- if (hcint.b.stall)
- retval |= handle_hc_stall_intr(_ifxhcd, ifxhc, hc_regs, urbd);
- if (hcint.b.ahberr) {
- clear_hc_int(hc_regs, ahberr);
- retval |= handle_hc_ahberr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
- }
- if (hcint.b.chhltd) {
- /* == 20110901 AVM/WK Fix: Flag must not be cleared after restart of channel ==*/
- clear_hc_int(hc_regs, chhltd);
- retval |= handle_hc_chhltd_intr(_ifxhcd, ifxhc, hc_regs, urbd);
- }
- if (hcint.b.xfercomp)
- retval |= handle_hc_xfercomp_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-
- /* == 20110901 AVM/WK Fix: Never clear possibly new intvals ==*/
- //ifxusb_wreg(&hc_regs->hcint,hcintval);
-
- SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-
- return retval;
-}
-
-
-
-
-
-
-static uint8_t update_interval_counter(ifxhcd_epqh_t *_epqh,uint32_t _diff)
-{
- if(_diff>=_epqh->period_counter)
- {
- _epqh->period_do=1;
- if(_diff>_epqh->interval)
- _epqh->period_counter=1;
- else
- _epqh->period_counter=_epqh->period_counter+_epqh->interval-_diff;
- return 1;
- }
- _epqh->period_counter=_epqh->period_counter-_diff;
- return 0;
-}
-
-
-
-
-/*
- * Handles the start-of-frame interrupt in host mode. Non-periodic
- * transactions may be queued to the DWC_otg controller for the current
- * (micro)frame. Periodic transactions may be queued to the controller for the
- * next (micro)frame.
- */
-static int32_t handle_sof_intr (ifxhcd_hcd_t *_ifxhcd)
-{
- #ifdef __DYN_SOF_INTR__
- uint8_t with_count_down=0;
- #endif
- uint8_t active_on=0;
- uint8_t ready_on=0;
- struct list_head *epqh_entry;
- ifxhcd_epqh_t *epqh;
- hfnum_data_t hfnum;
- uint32_t fndiff;
-
- unsigned long flags;
-#ifdef __USE_TIMER_4_SOF__
- uint32_t wait_for_sof = 0x10000;
-#endif
-
- SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-
- {
- int num_channels;
- ifxusb_hc_regs_t *hc_regs;
- int i;
- num_channels = _ifxhcd->core_if.params.host_channels;
-
-// AVM/WK moved block here due to use of SOF timer
- hfnum.d32 = ifxusb_rreg(&_ifxhcd->core_if.host_global_regs->hfnum);
- fndiff = hfnum.b.frnum;
- fndiff+= 0x00004000;
- fndiff-= _ifxhcd->lastframe ;
- fndiff&= 0x00003FFF;
- if(!fndiff) fndiff =1;
-
- for (i = 0; i < num_channels; i++)
- {
- if(_ifxhcd->ifxhc[i].wait_for_sof && _ifxhcd->ifxhc[i].xfer_started)
- {
-#ifdef __USE_TIMER_4_SOF__
- if (_ifxhcd->ifxhc[i].wait_for_sof > fndiff) {
- _ifxhcd->ifxhc[i].wait_for_sof -= fndiff;
- } else {
- _ifxhcd->ifxhc[i].wait_for_sof = 0;
- }
-#else
- _ifxhcd->ifxhc[i].wait_for_sof--;
-#endif
- if(_ifxhcd->ifxhc[i].wait_for_sof==0)
- {
- hcint_data_t hcint= { .d32=0 };
- hc_regs = _ifxhcd->core_if.hc_regs[i];
-
- hcint.d32 =0xFFFFFFFF;
- ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-
- hcint.d32=ifxusb_rreg(&hc_regs->hcintmsk);
- hcint.b.nak =0;
- hcint.b.ack =0;
- /* == 20110901 AVM/WK Fix: We don't need NOT YET IRQ ==*/
- hcint.b.nyet=0;
- _ifxhcd->ifxhc[i].nak_countdown=_ifxhcd->ifxhc[i].nak_countdown_r;
- if(_ifxhcd->ifxhc[i].nak_countdown_r)
- hcint.b.nak =1;
- ifxusb_wreg(&hc_regs->hcintmsk, hcint.d32);
-
- /* AVM WK / BC 20100827
- * FIX: Packet was ignored because of wrong Oddframe bit
- */
- if (_ifxhcd->ifxhc[i].ep_type == IFXUSB_EP_TYPE_INTR || _ifxhcd->ifxhc[i].ep_type == IFXUSB_EP_TYPE_ISOC)
- {
- hcchar_data_t hcchar;
- hcchar.d32 = _ifxhcd->ifxhc[i].hcchar;
- hfnum.d32 = ifxusb_rreg(&_ifxhcd->core_if.host_global_regs->hfnum);
- /* 1 if _next_ frame is odd, 0 if it's even */
- hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
- _ifxhcd->ifxhc[i].hcchar = hcchar.d32;
- }
-
- ifxusb_wreg(&hc_regs->hcchar, _ifxhcd->ifxhc[i].hcchar);
-
- }
- }
- else
- _ifxhcd->ifxhc[i].wait_for_sof=0;
-
-#ifdef __USE_TIMER_4_SOF__
- if (_ifxhcd->ifxhc[i].wait_for_sof && (wait_for_sof > _ifxhcd->ifxhc[i].wait_for_sof)) {
- wait_for_sof = _ifxhcd->ifxhc[i].wait_for_sof;
- }
-#endif
- }
- }
-
- // ISOC Active
- #ifdef __EN_ISOC__
- #error ISOC not supported: missing SOF code
- epqh_entry = _ifxhcd->epqh_isoc_active.next;
- while (epqh_entry != &_ifxhcd->epqh_isoc_active)
- {
- epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
- epqh_entry = epqh_entry->next;
- #ifdef __DYN_SOF_INTR__
- with_count_down=1;
- #endif
- active_on+=update_interval_counter(epqh,fndiff);
- }
-
- // ISOC Ready
- epqh_entry = _ifxhcd->epqh_isoc_ready.next;
- while (epqh_entry != &_ifxhcd->epqh_isoc_ready)
- {
- epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
- epqh_entry = epqh_entry->next;
- #ifdef __DYN_SOF_INTR__
- with_count_down=1;
- #endif
- ready_on+=update_interval_counter(epqh,fndiff);
- }
- #endif
-
- // INTR Active
- epqh_entry = _ifxhcd->epqh_intr_active.next;
- while (epqh_entry != &_ifxhcd->epqh_intr_active)
- {
- epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
- epqh_entry = epqh_entry->next;
- #ifdef __DYN_SOF_INTR__
- with_count_down=1;
- #endif
-#ifdef __USE_TIMER_4_SOF__
- if (update_interval_counter(epqh,fndiff)) {
- active_on ++;
- wait_for_sof = 1;
- } else {
- if (epqh->period_counter && (wait_for_sof > epqh->period_counter)) {
- wait_for_sof = epqh->period_counter;
- }
- }
-#else
- active_on+=update_interval_counter(epqh,fndiff);
-#endif
- }
-
- // INTR Ready
- epqh_entry = _ifxhcd->epqh_intr_ready.next;
- while (epqh_entry != &_ifxhcd->epqh_intr_ready)
- {
- epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
- epqh_entry = epqh_entry->next;
- #ifdef __DYN_SOF_INTR__
- with_count_down=1;
- #endif
-#ifdef __USE_TIMER_4_SOF__
- if (update_interval_counter(epqh,fndiff)) {
- ready_on ++;
- wait_for_sof = 1;
- } else {
- if (epqh->period_counter && (wait_for_sof > epqh->period_counter)) {
- wait_for_sof = epqh->period_counter;
- }
- }
-#else
- ready_on+=update_interval_counter(epqh,fndiff);
-#endif
- }
-
- // Stdby
- epqh_entry = _ifxhcd->epqh_stdby.next;
- while (epqh_entry != &_ifxhcd->epqh_stdby)
- {
- epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
- epqh_entry = epqh_entry->next;
- if(epqh->period_counter > 0 ) {
-#ifdef __USE_TIMER_4_SOF__
- if (epqh->period_counter > fndiff) {
- epqh->period_counter -= fndiff;
- } else {
- epqh->period_counter = 0;
- }
-#else
- epqh->period_counter --;
-#endif
- #ifdef __DYN_SOF_INTR__
- with_count_down=1;
- #endif
- }
- if(epqh->period_counter == 0) {
- ifxhcd_epqh_idle_periodic(epqh);
- }
-#ifdef __USE_TIMER_4_SOF__
- else {
- if (wait_for_sof > epqh->period_counter) {
- wait_for_sof = epqh->period_counter;
- }
- }
-#endif
- }
- SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-
- if(ready_on)
- select_eps(_ifxhcd);
- else if(active_on)
- process_channels(_ifxhcd);
-
- /* Clear interrupt */
- {
- gint_data_t gintsts;
- gintsts.d32=0;
- gintsts.b.sofintr = 1;
- ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
-
- #ifdef __DYN_SOF_INTR__
- if(!with_count_down)
- ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, gintsts.d32,0);
- #endif
-#ifdef __USE_TIMER_4_SOF__
- wait_for_sof &= 0xFFFF; // reduce to 16 Bits.
-
- if(wait_for_sof == 1) {
- // enable SOF
- gint_data_t gintsts;
- gintsts.d32=0;
- gintsts.b.sofintr = 1;
- ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, 0,gintsts.d32);
- } else {
- // disable SOF
- ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, gintsts.d32,0);
- if (wait_for_sof > 1) {
- // use timer, not SOF IRQ
- hprt0_data_t hprt0;
- ktime_t ktime;
- hprt0.d32 = ifxusb_read_hprt0 (&_ifxhcd->core_if);
- if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED) {
- ktime = ktime_set(0, wait_for_sof * 125 * 1000); /*--- wakeup in n*125usec ---*/
- } else {
- ktime = ktime_set(0, wait_for_sof * (1000*1000)); /*--- wakeup in n*1000usec ---*/
- }
- hrtimer_start(&_ifxhcd->hr_timer, ktime, HRTIMER_MODE_REL);
- }
- }
-#endif
- }
- _ifxhcd->lastframe=hfnum.b.frnum;
- return 1;
-}
-
-
-
-/* There are multiple conditions that can cause a port interrupt. This function
- * determines which interrupt conditions have occurred and handles them
- * appropriately. */
-static int32_t handle_port_intr (ifxhcd_hcd_t *_ifxhcd)
-{
- int retval = 0;
- hprt0_data_t hprt0;
- hprt0_data_t hprt0_modify;
-
- hprt0.d32 =
- hprt0_modify.d32 = ifxusb_rreg(_ifxhcd->core_if.hprt0);
-
- /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
- * GINTSTS */
-
- hprt0_modify.b.prtena = 0;
- hprt0_modify.b.prtconndet = 0;
- hprt0_modify.b.prtenchng = 0;
- hprt0_modify.b.prtovrcurrchng = 0;
-
- /* Port Connect Detected
- * Set flag and clear if detected */
- if (hprt0.b.prtconndet) {
- IFX_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
- "Port Connect Detected--\n", hprt0.d32);
- _ifxhcd->flags.b.port_connect_status_change = 1;
- _ifxhcd->flags.b.port_connect_status = 1;
- hprt0_modify.b.prtconndet = 1;
-
- /* The Hub driver asserts a reset when it sees port connect
- * status change flag */
- retval |= 1;
- }
-
- /* Port Enable Changed
- * Clear if detected - Set internal flag if disabled */
- if (hprt0.b.prtenchng) {
-
- IFX_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
- "Port Enable Changed--\n", hprt0.d32);
- hprt0_modify.b.prtenchng = 1;
- if (hprt0.b.prtena == 1)
- /* Port has been enabled set the reset change flag */
- _ifxhcd->flags.b.port_reset_change = 1;
- else
- _ifxhcd->flags.b.port_enable_change = 1;
- retval |= 1;
- }
-
- /* Overcurrent Change Interrupt */
-
- if (hprt0.b.prtovrcurrchng) {
- IFX_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
- "Port Overcurrent Changed--\n", hprt0.d32);
- _ifxhcd->flags.b.port_over_current_change = 1;
- hprt0_modify.b.prtovrcurrchng = 1;
- retval |= 1;
- }
-
- /* Clear Port Interrupts */
- ifxusb_wreg(_ifxhcd->core_if.hprt0, hprt0_modify.d32);
- return retval;
-}
-
-/*
- * This interrupt indicates that SUSPEND state has been detected on
- * the USB.
- * No Functioning in Host Mode
- */
-static int32_t handle_usb_suspend_intr(ifxhcd_hcd_t *_ifxhcd)
-{
- gint_data_t gintsts;
- IFX_DEBUGP("USB SUSPEND RECEIVED!\n");
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.usbsuspend = 1;
- ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
- return 1;
-}
-
-/*
- * This interrupt indicates that the IFXUSB controller has detected a
- * resume or remote wakeup sequence. If the IFXUSB controller is in
- * low power mode, the handler must brings the controller out of low
- * power mode. The controller automatically begins resume
- * signaling. The handler schedules a time to stop resume signaling.
- */
-static int32_t handle_wakeup_detected_intr(ifxhcd_hcd_t *_ifxhcd)
-{
- gint_data_t gintsts;
- hprt0_data_t hprt0 = {.d32=0};
- pcgcctl_data_t pcgcctl = {.d32=0};
- ifxusb_core_if_t *core_if = &_ifxhcd->core_if;
-
- IFX_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
-
- /*
- * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
- * so that OPT tests pass with all PHYs).
- */
- /* Restart the Phy Clock */
- pcgcctl.b.stoppclk = 1;
- ifxusb_mreg(core_if->pcgcctl, pcgcctl.d32, 0);
- UDELAY(10);
-
- /* Now wait for 70 ms. */
- hprt0.d32 = ifxusb_read_hprt0( core_if );
- IFX_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
- MDELAY(70);
- hprt0.b.prtres = 0; /* Resume */
- ifxusb_wreg(core_if->hprt0, hprt0.d32);
- IFX_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", ifxusb_rreg(core_if->hprt0));
-
- /* Clear interrupt */
- gintsts.d32 = 0;
- gintsts.b.wkupintr = 1;
- ifxusb_wreg(&core_if->core_global_regs->gintsts, gintsts.d32);
- return 1;
-}
-
-/*
- * This interrupt indicates that a device is initiating the Session
- * Request Protocol to request the host to turn on bus power so a new
- * session can begin. The handler responds by turning on bus power. If
- * the DWC_otg controller is in low power mode, the handler brings the
- * controller out of low power mode before turning on bus power.
- */
-static int32_t handle_session_req_intr(ifxhcd_hcd_t *_ifxhcd)
-{
- /* Clear interrupt */
- gint_data_t gintsts = { .d32 = 0 };
- gintsts.b.sessreqintr = 1;
- ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
- return 1;
-}
-
-/*
- * This interrupt indicates that a device has been disconnected from
- * the root port.
- */
-static int32_t handle_disconnect_intr(ifxhcd_hcd_t *_ifxhcd)
-{
- gint_data_t gintsts;
-
- ifxhcd_disconnect(_ifxhcd);
-
- gintsts.d32 = 0;
- gintsts.b.disconnect = 1;
- ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
- return 1;
-}
-
-/*
- * This function handles the Connector ID Status Change Interrupt. It
- * reads the OTG Interrupt Register (GOTCTL) to determine whether this
- * is a Device to Host Mode transition or a Host Mode to Device
- * Transition.
- * This only occurs when the cable is connected/removed from the PHY
- * connector.
- */
-static int32_t handle_conn_id_status_change_intr(ifxhcd_hcd_t *_ifxhcd)
-{
- gint_data_t gintsts;
-
- IFX_WARN("ID Status Change Interrupt: currently in %s mode\n",
- ifxusb_mode(&_ifxhcd->core_if) ? "Host" : "Device");
-
- gintsts.d32 = 0;
- gintsts.b.conidstschng = 1;
- ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
- return 1;
-}
-
-static int32_t handle_otg_intr(ifxhcd_hcd_t *_ifxhcd)
-{
- ifxusb_core_global_regs_t *global_regs = _ifxhcd->core_if.core_global_regs;
- gotgint_data_t gotgint;
- gotgint.d32 = ifxusb_rreg( &global_regs->gotgint);
- /* Clear GOTGINT */
- ifxusb_wreg (&global_regs->gotgint, gotgint.d32);
- return 1;
-}
-
-/** This function will log a debug message */
-static int32_t handle_mode_mismatch_intr(ifxhcd_hcd_t *_ifxhcd)
-{
- gint_data_t gintsts;
-
- IFX_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
- ifxusb_mode(&_ifxhcd->core_if) ? "Host" : "Device");
- gintsts.d32 = 0;
- gintsts.b.modemismatch = 1;
- ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
- return 1;
-}
-
-/** This function handles interrupts for the HCD. */
-int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd)
-{
- int retval = 0;
-
- ifxusb_core_if_t *core_if = &_ifxhcd->core_if;
- /* AVM/BC 20101111 Unnecesary variable removed*/
- //gint_data_t gintsts,gintsts2;
- gint_data_t gintsts;
-
- /* Check if HOST Mode */
- if (ifxusb_is_device_mode(core_if))
- {
- IFX_ERROR("%s() CRITICAL! IN DEVICE MODE\n", __func__);
- return 0;
- }
-
- gintsts.d32 = ifxusb_read_core_intr(core_if);
-
- if (!gintsts.d32)
- return 0;
-
- //Common INT
- if (gintsts.b.modemismatch)
- {
- retval |= handle_mode_mismatch_intr(_ifxhcd);
- gintsts.b.modemismatch=0;
- }
- if (gintsts.b.otgintr)
- {
- retval |= handle_otg_intr(_ifxhcd);
- gintsts.b.otgintr=0;
- }
- if (gintsts.b.conidstschng)
- {
- retval |= handle_conn_id_status_change_intr(_ifxhcd);
- gintsts.b.conidstschng=0;
- }
- if (gintsts.b.disconnect)
- {
- retval |= handle_disconnect_intr(_ifxhcd);
- gintsts.b.disconnect=0;
- }
- if (gintsts.b.sessreqintr)
- {
- retval |= handle_session_req_intr(_ifxhcd);
- gintsts.b.sessreqintr=0;
- }
- if (gintsts.b.wkupintr)
- {
- retval |= handle_wakeup_detected_intr(_ifxhcd);
- gintsts.b.wkupintr=0;
- }
- if (gintsts.b.usbsuspend)
- {
- retval |= handle_usb_suspend_intr(_ifxhcd);
- gintsts.b.usbsuspend=0;
- }
-
- //Host Int
- if (gintsts.b.sofintr)
- {
- retval |= handle_sof_intr (_ifxhcd);
- gintsts.b.sofintr=0;
- }
- if (gintsts.b.portintr)
- {
- retval |= handle_port_intr (_ifxhcd);
- gintsts.b.portintr=0;
- }
- if (gintsts.b.hcintr)
- {
- int i;
- haint_data_t haint;
- haint.d32 = ifxusb_read_host_all_channels_intr(core_if);
- for (i=0; i< core_if->params.host_channels; i++)
- if (haint.b2.chint & (1 << i))
- retval |= handle_hc_n_intr (_ifxhcd, i);
- gintsts.b.hcintr=0;
- }
- return retval;
-}
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_queue.c b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_queue.c
deleted file mode 100644
index 8f9dd25745..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxhcd_queue.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxhcd_queue.c
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : This file contains the functions to manage Queue Heads and Queue
- ** Transfer Descriptors.
- *****************************************************************************/
-
-/*!
- \file ifxhcd_queue.c
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the functions to manage Queue Heads and Queue
- Transfer Descriptors.
-*/
-#include <linux/version.h>
-#include "ifxusb_version.h"
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-
-#include "ifxusb_plat.h"
-#include "ifxusb_regs.h"
-#include "ifxusb_cif.h"
-#include "ifxhcd.h"
-
-#ifdef __EPQD_DESTROY_TIMEOUT__
- #define epqh_self_destroy_timeout 5
- static void eqph_destroy_func(unsigned long _ptr)
- {
- ifxhcd_epqh_t *epqh=(ifxhcd_epqh_t *)_ptr;
- if(epqh)
- {
- ifxhcd_epqh_free (epqh);
- }
- }
-#endif
-
-#define SCHEDULE_SLOP 10
-
-/*!
- \brief This function allocates and initializes a EPQH.
-
- \param _ifxhcd The HCD state structure for the USB Host controller.
- \param[in] _urb Holds the information about the device/endpoint that we need
- to initialize the EPQH.
-
- \return Returns pointer to the newly allocated EPQH, or NULL on error.
- */
-ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb)
-{
- ifxhcd_epqh_t *epqh;
-
- hprt0_data_t hprt0;
- struct usb_host_endpoint *sysep = ifxhcd_urb_to_endpoint(_urb);
-
- /* Allocate memory */
-// epqh=(ifxhcd_epqh_t *) kmalloc (sizeof(ifxhcd_epqh_t), GFP_KERNEL);
- epqh=(ifxhcd_epqh_t *) kmalloc (sizeof(ifxhcd_epqh_t), GFP_ATOMIC);
-
- if(epqh == NULL)
- return NULL;
-
- memset (epqh, 0, sizeof (ifxhcd_epqh_t));
-
- epqh->sysep=sysep;
-
- /* Initialize EPQH */
- switch (usb_pipetype(_urb->pipe))
- {
- case PIPE_CONTROL : epqh->ep_type = IFXUSB_EP_TYPE_CTRL; break;
- case PIPE_BULK : epqh->ep_type = IFXUSB_EP_TYPE_BULK; break;
- case PIPE_ISOCHRONOUS: epqh->ep_type = IFXUSB_EP_TYPE_ISOC; break;
- case PIPE_INTERRUPT : epqh->ep_type = IFXUSB_EP_TYPE_INTR; break;
- }
-
- //epqh->data_toggle = IFXUSB_HC_PID_DATA0;
-
- epqh->mps = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe)));
-
- hprt0.d32 = ifxusb_read_hprt0 (&_ifxhcd->core_if);
-
- INIT_LIST_HEAD(&epqh->urbd_list);
- INIT_LIST_HEAD(&epqh->epqh_list_entry);
- epqh->hc = NULL;
-
- epqh->dump_buf = ifxusb_alloc_buf(epqh->mps, 0);
-
- /* FS/LS Enpoint on HS Hub
- * NOT virtual root hub */
- epqh->need_split = 0;
- epqh->pkt_count_limit=0;
- if(epqh->ep_type == IFXUSB_EP_TYPE_BULK && !(usb_pipein(_urb->pipe)) )
- epqh->pkt_count_limit=4;
- if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED &&
- ((_urb->dev->speed == USB_SPEED_LOW) ||
- (_urb->dev->speed == USB_SPEED_FULL)) &&
- (_urb->dev->tt) && (_urb->dev->tt->hub->devnum != 1))
- {
- IFX_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
- usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum,
- _urb->dev->ttport);
- epqh->need_split = 1;
- epqh->pkt_count_limit=1;
- }
-
- if (epqh->ep_type == IFXUSB_EP_TYPE_INTR ||
- epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
- {
- /* Compute scheduling parameters once and save them. */
- epqh->interval = _urb->interval;
- if(epqh->need_split)
- epqh->interval *= 8;
- }
-
- epqh->period_counter=0;
- epqh->is_active=0;
-
- #ifdef __EPQD_DESTROY_TIMEOUT__
- /* Start a timer for this transfer. */
- init_timer(&epqh->destroy_timer);
- epqh->destroy_timer.function = eqph_destroy_func;
- epqh->destroy_timer.data = (unsigned long)(epqh);
- #endif
-
- #ifdef __DEBUG__
- IFX_DEBUGPL(DBG_HCD , "IFXUSB HCD EPQH Initialized\n");
- IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - epqh = %p\n", epqh);
- IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Device Address = %d EP %d, %s\n",
- _urb->dev->devnum,
- usb_pipeendpoint(_urb->pipe),
- usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
- IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Speed = %s\n",
- ({ char *speed; switch (_urb->dev->speed) {
- case USB_SPEED_LOW: speed = "low" ; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }; speed;}));
- IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Type = %s\n",
- ({
- char *type; switch (epqh->ep_type)
- {
- case IFXUSB_EP_TYPE_ISOC: type = "isochronous"; break;
- case IFXUSB_EP_TYPE_INTR: type = "interrupt" ; break;
- case IFXUSB_EP_TYPE_CTRL: type = "control" ; break;
- case IFXUSB_EP_TYPE_BULK: type = "bulk" ; break;
- default: type = "?"; break;
- };
- type;
- }));
- if (epqh->ep_type == IFXUSB_EP_TYPE_INTR)
- IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - interval = %d\n", epqh->interval);
- #endif
-
- return epqh;
-}
-
-
-
-
-
-
-/*!
- \brief Free the EPQH. EPQH should already be removed from a list.
- URBD list should already be empty if called from URB Dequeue.
-
- \param[in] _epqh The EPQH to free.
- */
-void ifxhcd_epqh_free (ifxhcd_epqh_t *_epqh)
-{
- unsigned long flags;
-
- if(_epqh->sysep) _epqh->sysep->hcpriv=NULL;
- _epqh->sysep=NULL;
-
- if(!_epqh)
- return;
-
- /* Free each QTD in the QTD list */
- local_irq_save (flags);
- if (!list_empty(&_epqh->urbd_list))
- IFX_WARN("%s() invalid epqh state\n",__func__);
-
- #if defined(__UNALIGNED_BUFFER_ADJ__)
- if(_epqh->aligned_buf)
- ifxusb_free_buf(_epqh->aligned_buf);
- if(_epqh->aligned_setup)
- ifxusb_free_buf(_epqh->aligned_setup);
- #endif
-
- if (!list_empty(&_epqh->epqh_list_entry))
- list_del_init(&_epqh->epqh_list_entry);
-
- #ifdef __EPQD_DESTROY_TIMEOUT__
- del_timer(&_epqh->destroy_timer);
- #endif
- if(_epqh->dump_buf)
- ifxusb_free_buf(_epqh->dump_buf);
- _epqh->dump_buf=0;
-
-
- kfree (_epqh);
- local_irq_restore (flags);
-}
-
-/*!
- \brief This function adds a EPQH to
-
- \return 0 if successful, negative error code otherwise.
- */
-void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
-{
- unsigned long flags;
- local_irq_save(flags);
- if (list_empty(&_epqh->epqh_list_entry))
- {
- #ifdef __EN_ISOC__
- if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
- list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
- else
- #endif
- if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
- list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
- else
- list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
- _epqh->is_active=0;
- }
- else if(!_epqh->is_active)
- {
- #ifdef __EN_ISOC__
- if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
- list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
- else
- #endif
- if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
- list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
- else
- list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
- }
- #ifdef __EPQD_DESTROY_TIMEOUT__
- del_timer(&_epqh->destroy_timer);
- #endif
- local_irq_restore(flags);
-}
-
-void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
-{
- unsigned long flags;
- local_irq_save(flags);
- if (list_empty(&_epqh->epqh_list_entry))
- IFX_WARN("%s() invalid epqh state\n",__func__);
- #ifdef __EN_ISOC__
- if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
- list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_active);
- else
- #endif
- if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
- list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_active);
- else
- list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_active);
- _epqh->is_active=1;
- #ifdef __EPQD_DESTROY_TIMEOUT__
- del_timer(&_epqh->destroy_timer);
- #endif
- local_irq_restore(flags);
-}
-
-void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
-{
- unsigned long flags;
- local_irq_save(flags);
-
- if (list_empty(&_epqh->urbd_list))
- {
- if(_epqh->ep_type == IFXUSB_EP_TYPE_ISOC || _epqh->ep_type == IFXUSB_EP_TYPE_INTR)
- {
- list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_stdby);
- }
- else
- {
- list_del_init(&_epqh->epqh_list_entry);
- #ifdef __EPQD_DESTROY_TIMEOUT__
- del_timer(&_epqh->destroy_timer);
- _epqh->destroy_timer.expires = jiffies + (HZ*epqh_self_destroy_timeout);
- add_timer(&_epqh->destroy_timer );
- #endif
- }
- }
- else
- {
- #ifdef __EN_ISOC__
- if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
- list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
- else
- #endif
- if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
- list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
- else
- list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
- }
- _epqh->is_active=0;
- local_irq_restore(flags);
-}
-
-
-void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh)
-{
- unsigned long flags;
- if(_epqh->ep_type != IFXUSB_EP_TYPE_ISOC && _epqh->ep_type != IFXUSB_EP_TYPE_INTR)
- return;
-
- local_irq_save(flags);
-
- if (list_empty(&_epqh->epqh_list_entry))
- IFX_WARN("%s() invalid epqh state\n",__func__);
- if (!list_empty(&_epqh->urbd_list))
- IFX_WARN("%s() invalid epqh state(not empty)\n",__func__);
-
- _epqh->is_active=0;
- list_del_init(&_epqh->epqh_list_entry);
- #ifdef __EPQD_DESTROY_TIMEOUT__
- del_timer(&_epqh->destroy_timer);
- _epqh->destroy_timer.expires = jiffies + (HZ*epqh_self_destroy_timeout);
- add_timer(&_epqh->destroy_timer );
- #endif
-
- local_irq_restore(flags);
-}
-
-
-int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb)
-{
- ifxhcd_urbd_t *urbd;
- struct usb_host_endpoint *sysep;
- ifxhcd_epqh_t *epqh;
- unsigned long flags;
- /* == AVM/WK 20100714 retval correctly initialized ==*/
- int retval = -ENOMEM;
-
- /*== AVM/BC 20100630 - Spinlock ==*/
- //local_irq_save(flags);
- SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-
-// urbd = (ifxhcd_urbd_t *) kmalloc (sizeof(ifxhcd_urbd_t), GFP_KERNEL);
- urbd = (ifxhcd_urbd_t *) kmalloc (sizeof(ifxhcd_urbd_t), GFP_ATOMIC);
- if (urbd != NULL) /* Initializes a QTD structure.*/
- {
- retval = 0;
- memset (urbd, 0, sizeof (ifxhcd_urbd_t));
-
- sysep = ifxhcd_urb_to_endpoint(_urb);
- epqh = (ifxhcd_epqh_t *)sysep->hcpriv;
- if (epqh == NULL)
- {
- epqh = ifxhcd_epqh_create (_ifxhcd, _urb);
- if (epqh == NULL)
- {
- retval = -ENOSPC;
- kfree(urbd);
- //local_irq_restore (flags);
- SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
- return retval;
- }
- sysep->hcpriv = epqh;
- }
-
- INIT_LIST_HEAD(&urbd->urbd_list_entry);
-
- /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
- retval = usb_hcd_link_urb_to_ep(ifxhcd_to_syshcd(_ifxhcd), _urb);
-
- if (unlikely(retval)){
- kfree(urbd);
- kfree(epqh);
- SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
- return retval;
- }
-
- list_add_tail(&urbd->urbd_list_entry, &epqh->urbd_list);
- urbd->urb = _urb;
- _urb->hcpriv = urbd;
-
- urbd->epqh=epqh;
- urbd->is_in=usb_pipein(_urb->pipe) ? 1 : 0;;
-
- urbd->xfer_len=_urb->transfer_buffer_length;
-#define URB_NO_SETUP_DMA_MAP 0
-
- if(urbd->xfer_len>0)
- {
- if(_urb->transfer_flags && URB_NO_TRANSFER_DMA_MAP)
- urbd->xfer_buff = (uint8_t *) (KSEG1ADDR((uint32_t *)_urb->transfer_dma));
- else
- urbd->xfer_buff = (uint8_t *) _urb->transfer_buffer;
- }
- if(epqh->ep_type == IFXUSB_EP_TYPE_CTRL)
- {
- if(_urb->transfer_flags && URB_NO_SETUP_DMA_MAP)
- urbd->setup_buff = (uint8_t *) (KSEG1ADDR((uint32_t *)_urb->setup_dma));
- else
- urbd->setup_buff = (uint8_t *) _urb->setup_packet;
- }
- }
- //local_irq_restore (flags);
- SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
- return retval;
-}
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif.c b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif.c
deleted file mode 100644
index 10b12927cf..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif.c
+++ /dev/null
@@ -1,1458 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxusb_cif.c
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : The Core Interface provides basic services for accessing and
- ** managing the IFX USB hardware. These services are used by both the
- ** Host Controller Driver and the Peripheral Controller Driver.
- *****************************************************************************/
-
-/*!
- \file ifxusb_cif.c
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the interface to the IFX USB Core.
-*/
-
-#include <linux/clk.h>
-#include <linux/version.h>
-#include "ifxusb_version.h"
-
-#include <asm/byteorder.h>
-#include <asm/unaligned.h>
-
-
-#include <linux/jiffies.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-
-#if defined(__UEIP__)
-// #include <asm/ifx/ifx_pmu.h>
-// #include <ifx_pmu.h>
-#endif
-
-
-#include "ifxusb_plat.h"
-#include "ifxusb_regs.h"
-#include "ifxusb_cif.h"
-
-
-#ifdef __IS_DEVICE__
- #include "ifxpcd.h"
-#endif
-
-#ifdef __IS_HOST__
- #include "ifxhcd.h"
-#endif
-
-#include <linux/mm.h>
-
-#include <linux/gfp.h>
-
-#if defined(__UEIP__)
-// #include <asm/ifx/ifx_board.h>
- //#include <ifx_board.h>
-#endif
-
-//#include <asm/ifx/ifx_gpio.h>
-//#include <ifx_gpio.h>
-#if defined(__UEIP__)
-// #include <asm/ifx/ifx_led.h>
- //#include <ifx_led.h>
-#endif
-
-
-
-#if defined(__UEIP__)
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
- #ifndef USB_CTRL_PMU_SETUP
- #define USB_CTRL_PMU_SETUP(__x) USB0_CTRL_PMU_SETUP(__x)
- #endif
- #ifndef USB_PHY_PMU_SETUP
- #define USB_PHY_PMU_SETUP(__x) USB0_PHY_PMU_SETUP(__x)
- #endif
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-#endif // defined(__UEIP__)
-
-/*!
- \brief This function is called to allocate buffer of specified size.
- The allocated buffer is mapped into DMA accessable address.
- \param size Size in BYTE to be allocated
- \param clear 0: don't do clear after buffer allocated, other: do clear to zero
- \return 0/NULL: Fail; uncached pointer of allocated buffer
- */
-void *ifxusb_alloc_buf(size_t size, int clear)
-{
- uint32_t *cached,*uncached;
- uint32_t totalsize,page;
-
- if(!size)
- return 0;
-
- size=(size+3)&0xFFFFFFFC;
- totalsize=size + 12;
- page=get_order(totalsize);
-
- cached = (void *) __get_free_pages(( GFP_ATOMIC | GFP_DMA), page);
-
- if(!cached)
- {
- IFX_PRINT("%s Allocation Failed size:%d\n",__func__,size);
- return NULL;
- }
-
- uncached = (uint32_t *)(KSEG1ADDR(cached));
- if(clear)
- memset(uncached, 0, totalsize);
-
- *(uncached+0)=totalsize;
- *(uncached+1)=page;
- *(uncached+2)=(uint32_t)cached;
- return (void *)(uncached+3);
-}
-
-
-/*!
- \brief This function is called to free allocated buffer.
- \param vaddr the uncached pointer of the buffer
- */
-void ifxusb_free_buf(void *vaddr)
-{
- uint32_t totalsize,page;
- uint32_t *cached,*uncached;
-
- if(vaddr != NULL)
- {
- uncached=vaddr;
- uncached-=3;
- totalsize=*(uncached+0);
- page=*(uncached+1);
- cached=(uint32_t *)(*(uncached+2));
- if(totalsize && page==get_order(totalsize) && cached==(uint32_t *)(KSEG0ADDR(uncached)))
- {
- free_pages((unsigned long)cached, page);
- return;
- }
- // the memory is not allocated by ifxusb_alloc_buf. Allowed but must be careful.
- return;
- }
-}
-
-
-
-/*!
- \brief This function is called to initialize the IFXUSB CSR data
- structures. The register addresses in the device and host
- structures are initialized from the base address supplied by the
- caller. The calling function must make the OS calls to get the
- base address of the IFXUSB controller registers.
-
- \param _core_if Pointer of core_if structure
- \param _irq irq number
- \param _reg_base_addr Base address of IFXUSB core registers
- \param _fifo_base_addr Fifo base address
- \param _fifo_dbg_addr Fifo debug address
- \return 0: success;
- */
-int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
- int _irq,
- uint32_t _reg_base_addr,
- uint32_t _fifo_base_addr,
- uint32_t _fifo_dbg_addr)
-{
- int retval = 0;
- uint32_t *reg_base =NULL;
- uint32_t *fifo_base =NULL;
- uint32_t *fifo_dbg =NULL;
-
- int i;
-
- IFX_DEBUGPL(DBG_CILV, "%s(%p,%d,0x%08X,0x%08X,0x%08X)\n", __func__,
- _core_if,
- _irq,
- _reg_base_addr,
- _fifo_base_addr,
- _fifo_dbg_addr);
-
- if( _core_if == NULL)
- {
- IFX_ERROR("%s() invalid _core_if\n", __func__);
- retval = -ENOMEM;
- goto fail;
- }
-
- //memset(_core_if, 0, sizeof(ifxusb_core_if_t));
-
- _core_if->irq=_irq;
-
- reg_base =ioremap_nocache(_reg_base_addr , IFXUSB_IOMEM_SIZE );
- fifo_base =ioremap_nocache(_fifo_base_addr, IFXUSB_FIFOMEM_SIZE);
- fifo_dbg =ioremap_nocache(_fifo_dbg_addr , IFXUSB_FIFODBG_SIZE);
- if( reg_base == NULL || fifo_base == NULL || fifo_dbg == NULL)
- {
- IFX_ERROR("%s() usb ioremap() failed\n", __func__);
- retval = -ENOMEM;
- goto fail;
- }
-
- _core_if->core_global_regs = (ifxusb_core_global_regs_t *)reg_base;
-
- /*
- * Attempt to ensure this device is really a IFXUSB Controller.
- * Read and verify the SNPSID register contents. The value should be
- * 0x45F42XXX
- */
- {
- int32_t snpsid;
- snpsid = ifxusb_rreg(&_core_if->core_global_regs->gsnpsid);
- if ((snpsid & 0xFFFFF000) != 0x4F542000)
- {
- IFX_ERROR("%s() snpsid error(0x%08x) failed\n", __func__,snpsid);
- retval = -EINVAL;
- goto fail;
- }
- _core_if->snpsid=snpsid;
- }
-
- #ifdef __IS_HOST__
- _core_if->host_global_regs = (ifxusb_host_global_regs_t *)
- ((uint32_t)reg_base + IFXUSB_HOST_GLOBAL_REG_OFFSET);
- _core_if->hprt0 = (uint32_t*)((uint32_t)reg_base + IFXUSB_HOST_PORT_REGS_OFFSET);
-
- for (i=0; i<MAX_EPS_CHANNELS; i++)
- {
- _core_if->hc_regs[i] = (ifxusb_hc_regs_t *)
- ((uint32_t)reg_base + IFXUSB_HOST_CHAN_REGS_OFFSET +
- (i * IFXUSB_CHAN_REGS_OFFSET));
- IFX_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
- i, &_core_if->hc_regs[i]->hcchar);
- }
- #endif //__IS_HOST__
-
- #ifdef __IS_DEVICE__
- _core_if->dev_global_regs =
- (ifxusb_device_global_regs_t *)((uint32_t)reg_base + IFXUSB_DEV_GLOBAL_REG_OFFSET);
-
- for (i=0; i<MAX_EPS_CHANNELS; i++)
- {
- _core_if->in_ep_regs[i] = (ifxusb_dev_in_ep_regs_t *)
- ((uint32_t)reg_base + IFXUSB_DEV_IN_EP_REG_OFFSET +
- (i * IFXUSB_EP_REG_OFFSET));
- _core_if->out_ep_regs[i] = (ifxusb_dev_out_ep_regs_t *)
- ((uint32_t)reg_base + IFXUSB_DEV_OUT_EP_REG_OFFSET +
- (i * IFXUSB_EP_REG_OFFSET));
- IFX_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p/%p %p/0x%08X/0x%08X\n",
- i, &_core_if->in_ep_regs[i]->diepctl, _core_if->in_ep_regs[i],
- reg_base,IFXUSB_DEV_IN_EP_REG_OFFSET,(i * IFXUSB_EP_REG_OFFSET)
- );
- IFX_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p/%p %p/0x%08X/0x%08X\n",
- i, &_core_if->out_ep_regs[i]->doepctl, _core_if->out_ep_regs[i],
- reg_base,IFXUSB_DEV_OUT_EP_REG_OFFSET,(i * IFXUSB_EP_REG_OFFSET)
- );
- }
- #endif //__IS_DEVICE__
-
- /* Setting the FIFO and other Address. */
- for (i=0; i<MAX_EPS_CHANNELS; i++)
- {
- _core_if->data_fifo[i] = fifo_base + (i * IFXUSB_DATA_FIFO_SIZE);
- IFX_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
- i, (unsigned)_core_if->data_fifo[i]);
- }
-
- _core_if->data_fifo_dbg = fifo_dbg;
- _core_if->pcgcctl = (uint32_t*)(((uint32_t)reg_base) + IFXUSB_PCGCCTL_OFFSET);
-
- /*
- * Store the contents of the hardware configuration registers here for
- * easy access later.
- */
- _core_if->hwcfg1.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg1);
- _core_if->hwcfg2.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg2);
- _core_if->hwcfg3.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg3);
- _core_if->hwcfg4.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg4);
-
- IFX_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",_core_if->hwcfg1.d32);
- IFX_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",_core_if->hwcfg2.d32);
- IFX_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",_core_if->hwcfg3.d32);
- IFX_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",_core_if->hwcfg4.d32);
-
-
- #ifdef __DED_FIFO__
- IFX_PRINT("Waiting for PHY Clock Lock!\n");
- while(!( ifxusb_rreg(&_core_if->core_global_regs->grxfsiz) & (1<<9)))
- {
- }
- IFX_PRINT("PHY Clock Locked!\n");
- //ifxusb_clean_spram(_core_if,128*1024/4);
- #endif
-
- /* Create new workqueue and init works */
-#if 0
- _core_if->wq_usb = create_singlethread_workqueue(_core_if->core_name);
-
- if(_core_if->wq_usb == 0)
- {
- IFX_DEBUGPL(DBG_CIL, "Creation of wq_usb failed\n");
- retval = -EINVAL;
- goto fail;
- }
-
- #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if);
- INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if);
- #else
- INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
- INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
- #endif
-#endif
- return 0;
-
-fail:
- if( reg_base != NULL) iounmap(reg_base );
- if( fifo_base != NULL) iounmap(fifo_base);
- if( fifo_dbg != NULL) iounmap(fifo_dbg );
- return retval;
-}
-
-/*!
- \brief This function free the mapped address in the IFXUSB CSR data structures.
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if)
-{
- /* Disable all interrupts */
- if( _core_if->core_global_regs != NULL)
- {
- ifxusb_mreg( &_core_if->core_global_regs->gahbcfg, 1, 0);
- ifxusb_wreg( &_core_if->core_global_regs->gintmsk, 0);
- }
-
- if( _core_if->core_global_regs != NULL) iounmap(_core_if->core_global_regs );
- if( _core_if->data_fifo[0] != NULL) iounmap(_core_if->data_fifo[0] );
- if( _core_if->data_fifo_dbg != NULL) iounmap(_core_if->data_fifo_dbg );
-
-#if 0
- if (_core_if->wq_usb)
- destroy_workqueue(_core_if->wq_usb);
-#endif
- memset(_core_if, 0, sizeof(ifxusb_core_if_t));
-}
-
-
-
-
-/*!
- \brief This function enbles the controller's Global Interrupt in the AHB Config register.
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if )
-{
- gahbcfg_data_t ahbcfg ={ .d32 = 0};
- ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
- ifxusb_mreg(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
-}
-
-/*!
- \brief This function disables the controller's Global Interrupt in the AHB Config register.
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if )
-{
- gahbcfg_data_t ahbcfg ={ .d32 = 0};
- ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
- ifxusb_mreg(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
-}
-
-
-
-
-/*!
- \brief Flush Tx and Rx FIFO.
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if )
-{
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
- volatile grstctl_t greset ={ .d32 = 0};
- int count = 0;
-
- IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
- greset.b.rxfflsh = 1;
- greset.b.txfflsh = 1;
- greset.b.txfnum = 0x10;
- greset.b.intknqflsh=1;
- greset.b.hstfrm=1;
- ifxusb_wreg( &global_regs->grstctl, greset.d32 );
-
- do
- {
- greset.d32 = ifxusb_rreg( &global_regs->grstctl);
- if (++count > 10000)
- {
- IFX_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32);
- break;
- }
- } while (greset.b.rxfflsh == 1 || greset.b.txfflsh == 1);
- /* Wait for 3 PHY Clocks*/
- UDELAY(1);
-}
-
-/*!
- \brief Flush a Tx FIFO.
- \param _core_if Pointer of core_if structure
- \param _num Tx FIFO to flush. ( 0x10 for ALL TX FIFO )
- */
-void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num )
-{
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
- volatile grstctl_t greset ={ .d32 = 0};
- int count = 0;
-
- IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num);
-
- greset.b.intknqflsh=1;
- greset.b.txfflsh = 1;
- greset.b.txfnum = _num;
- ifxusb_wreg( &global_regs->grstctl, greset.d32 );
-
- do
- {
- greset.d32 = ifxusb_rreg( &global_regs->grstctl);
- if (++count > 10000&&(_num==0 ||_num==0x10))
- {
- IFX_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
- __func__, greset.d32,
- ifxusb_rreg( &global_regs->gnptxsts));
- break;
- }
- } while (greset.b.txfflsh == 1);
- /* Wait for 3 PHY Clocks*/
- UDELAY(1);
-}
-
-
-/*!
- \brief Flush Rx FIFO.
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if )
-{
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
- volatile grstctl_t greset ={ .d32 = 0};
- int count = 0;
-
- IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
- greset.b.rxfflsh = 1;
- ifxusb_wreg( &global_regs->grstctl, greset.d32 );
-
- do
- {
- greset.d32 = ifxusb_rreg( &global_regs->grstctl);
- if (++count > 10000)
- {
- IFX_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32);
- break;
- }
- } while (greset.b.rxfflsh == 1);
- /* Wait for 3 PHY Clocks*/
- UDELAY(1);
-}
-
-
-#define SOFT_RESET_DELAY 100
-
-/*!
- \brief Do a soft reset of the core. Be careful with this because it
- resets all the internal state machines of the core.
- \param _core_if Pointer of core_if structure
- */
-int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if)
-{
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
- volatile grstctl_t greset ={ .d32 = 0};
- int count = 0;
-
- IFX_DEBUGPL(DBG_CILV, "%s\n", __func__);
- /* Wait for AHB master IDLE state. */
- do
- {
- UDELAY(10);
- greset.d32 = ifxusb_rreg( &global_regs->grstctl);
- if (++count > 100000)
- {
- IFX_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__,
- greset.d32, greset.b.ahbidle);
- break;
- }
- } while (greset.b.ahbidle == 0);
-
- UDELAY(1);
-
- /* Core Soft Reset */
- count = 0;
- greset.b.csftrst = 1;
- ifxusb_wreg( &global_regs->grstctl, greset.d32 );
-
- #ifdef SOFT_RESET_DELAY
- MDELAY(SOFT_RESET_DELAY);
- #endif
-
- do
- {
- UDELAY(10);
- greset.d32 = ifxusb_rreg( &global_regs->grstctl);
- if (++count > 100000)
- {
- IFX_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, greset.d32);
- return -1;
- }
- } while (greset.b.csftrst == 1);
-
- #ifdef SOFT_RESET_DELAY
- MDELAY(SOFT_RESET_DELAY);
- #endif
-
-
- #if defined(__IS_VR9__)
- if(_core_if->core_no==0)
- {
- set_bit (4, VR9_RCU_USBRESET2);
- MDELAY(50);
- clear_bit (4, VR9_RCU_USBRESET2);
- }
- else
- {
- set_bit (5, VR9_RCU_USBRESET2);
- MDELAY(50);
- clear_bit (5, VR9_RCU_USBRESET2);
- }
- MDELAY(50);
- #endif //defined(__IS_VR9__)
-
- IFX_PRINT("USB core #%d soft-reset\n",_core_if->core_no);
-
- return 0;
-}
-
-/*!
- \brief Turn on the USB Core Power
- \param _core_if Pointer of core_if structure
-*/
-void ifxusb_power_on (ifxusb_core_if_t *_core_if)
-{
- struct clk *clk0 = clk_get_sys("usb0", NULL);
- struct clk *clk1 = clk_get_sys("usb1", NULL);
- // set clock gating
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- #if defined(__UEIP__)
-
- #if defined(__IS_TWINPASS) || defined(__IS_DANUBE__)
- set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR);
- set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- // clear_bit (4, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
- clear_bit (5, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- set_bit (0, (volatile unsigned long *)AR9_CGU_IFCCR);
- set_bit (1, (volatile unsigned long *)AR9_CGU_IFCCR);
- #endif //defined(__IS_AR9__)
- #if defined(__IS_VR9__)
-// set_bit (0, (volatile unsigned long *)VR9_CGU_IFCCR);
-// set_bit (1, (volatile unsigned long *)VR9_CGU_IFCCR);
- #endif //defined(__IS_VR9__)
-
- MDELAY(50);
-
- // set power
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
- USB_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
- //#if defined(__IS_TWINPASS__)
- // ifxusb_enable_afe_oc();
- //#endif
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__) || defined(__IS_VR9__)
- if(_core_if->core_no==0)
- clk_enable(clk0);
-// USB0_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
- else
- clk_enable(clk1);
-// USB1_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
- #endif //defined(__IS_AR9__) || defined(__IS_VR9__)
-
- if(_core_if->core_global_regs)
- {
- // PHY configurations.
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AR9__)
- #if defined(__IS_VR9__)
- //ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_VR9__)
- }
- #else //defined(__UEIP__)
- #if defined(__IS_TWINPASS) || defined(__IS_DANUBE__)
- set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR);
- set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- // clear_bit (4, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
- clear_bit (5, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- set_bit (0, (volatile unsigned long *)AMAZON_S_CGU_IFCCR);
- set_bit (1, (volatile unsigned long *)AMAZON_S_CGU_IFCCR);
- #endif //defined(__IS_AR9__)
-
- MDELAY(50);
-
- // set power
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- clear_bit (6, (volatile unsigned long *)DANUBE_PMU_PWDCR);//USB
- clear_bit (9, (volatile unsigned long *)DANUBE_PMU_PWDCR);//DSL
- clear_bit (15, (volatile unsigned long *)DANUBE_PMU_PWDCR);//AHB
- #if defined(__IS_TWINPASS__)
- ifxusb_enable_afe_oc();
- #endif
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- clear_bit (6, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
- clear_bit (9, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
- clear_bit (15, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- clear_bit (6, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
- else
- clear_bit (27, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
- clear_bit (9, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//DSL
- clear_bit (15, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//AHB
- #endif //defined(__IS_AR9__)
-
- if(_core_if->core_global_regs)
- {
- // PHY configurations.
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AR9__)
- }
-
- #endif //defined(__UEIP__)
-}
-
-/*!
- \brief Turn off the USB Core Power
- \param _core_if Pointer of core_if structure
-*/
-void ifxusb_power_off (ifxusb_core_if_t *_core_if)
-{
- struct clk *clk0 = clk_get_sys("usb0", NULL);
- struct clk *clk1 = clk_get_sys("usb1", NULL);
- ifxusb_phy_power_off (_core_if);
-
- // set power
- #if defined(__UEIP__)
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
- USB_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__) || defined(__IS_VR9__)
- if(_core_if->core_no==0)
- clk_disable(clk0);
- //USB0_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
- else
- clk_disable(clk1);
- //USB1_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
- #endif //defined(__IS_AR9__) || defined(__IS_VR9__)
- #else //defined(__UEIP__)
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- set_bit (6, (volatile unsigned long *)DANUBE_PMU_PWDCR);//USB
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- set_bit (6, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);//USB
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- set_bit (6, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
- else
- set_bit (27, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
- #endif //defined(__IS_AR9__)
- #endif //defined(__UEIP__)
-}
-
-/*!
- \brief Turn on the USB PHY Power
- \param _core_if Pointer of core_if structure
-*/
-void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if)
-{
- struct clk *clk0 = clk_get_sys("usb0", NULL);
- struct clk *clk1 = clk_get_sys("usb1", NULL);
- #if defined(__UEIP__)
- if(_core_if->core_global_regs)
- {
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AR9__)
- #if defined(__IS_VR9_S__)
- if(_core_if->core_no==0)
- set_bit (0, VR9_RCU_USB_ANA_CFG1A);
- else
- set_bit (0, VR9_RCU_USB_ANA_CFG1B);
- #endif //defined(__IS_VR9__)
- }
-
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
- USB_PHY_PMU_SETUP(IFX_PMU_ENABLE);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__) || defined(__IS_VR9__)
- if(_core_if->core_no==0)
- clk_enable(clk0);
- //USB0_PHY_PMU_SETUP(IFX_PMU_ENABLE);
- else
- clk_enable(clk1);
- //USB1_PHY_PMU_SETUP(IFX_PMU_ENABLE);
- #endif //defined(__IS_AR9__) || defined(__IS_VR9__)
-
- // PHY configurations.
- if(_core_if->core_global_regs)
- {
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AR9__)
- #if defined(__IS_VR9_S__)
- if(_core_if->core_no==0)
- set_bit (0, VR9_RCU_USB_ANA_CFG1A);
- else
- set_bit (0, VR9_RCU_USB_ANA_CFG1B);
- #endif //defined(__IS_VR9__)
- }
- #else //defined(__UEIP__)
- // PHY configurations.
- if(_core_if->core_global_regs)
- {
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AR9__)
- }
-
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- clear_bit (0, (volatile unsigned long *)DANUBE_PMU_PWDCR);//PHY
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- clear_bit (0, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- clear_bit (0, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
- else
- clear_bit (26, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
- #endif //defined(__IS_AR9__)
-
- // PHY configurations.
- if(_core_if->core_global_regs)
- {
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AR9__)
- }
- #endif //defined(__UEIP__)
-}
-
-
-/*!
- \brief Turn off the USB PHY Power
- \param _core_if Pointer of core_if structure
-*/
-void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if)
-{
- struct clk *clk0 = clk_get_sys("usb0", NULL);
- struct clk *clk1 = clk_get_sys("usb1", NULL);
- #if defined(__UEIP__)
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
- USB_PHY_PMU_SETUP(IFX_PMU_DISABLE);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__) || defined(__IS_VR9__)
- if(_core_if->core_no==0)
- clk_disable(clk0);
- //USB0_PHY_PMU_SETUP(IFX_PMU_DISABLE);
- else
- clk_disable(clk1);
- //USB1_PHY_PMU_SETUP(IFX_PMU_DISABLE);
- #endif // defined(__IS_AR9__) || defined(__IS_VR9__)
- #else //defined(__UEIP__)
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- set_bit (0, (volatile unsigned long *)DANUBE_PMU_PWDCR);//PHY
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- set_bit (0, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);//PHY
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- set_bit (0, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
- else
- set_bit (26, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
- #endif //defined(__IS_AR9__)
- #endif //defined(__UEIP__)
-}
-
-
-/*!
- \brief Reset on the USB Core RCU
- \param _core_if Pointer of core_if structure
- */
-#if defined(__IS_VR9__)
- int already_hard_reset=0;
-#endif
-void ifxusb_hard_reset(ifxusb_core_if_t *_core_if)
-{
- #if defined(__UEIP__)
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined (__IS_HOST__)
- clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
- #elif defined (__IS_DEVICE__)
- set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
- #endif
- #endif //defined(__IS_AMAZON_SE__)
-
- #if defined(__IS_AMAZON_SE__)
- #if defined (__IS_HOST__)
- clear_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
- #elif defined (__IS_DEVICE__)
- set_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
- #endif
- #endif //defined(__IS_AMAZON_SE__)
-
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- {
- #if defined (__IS_HOST__)
- clear_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
- #elif defined (__IS_DEVICE__)
- set_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
- #endif
- }
- else
- {
- #if defined (__IS_HOST__)
- clear_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
- #elif defined (__IS_DEVICE__)
- set_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
- #endif
- }
- #endif //defined(__IS_AR9__)
-
- #if defined(__IS_VR9__)
- if(_core_if->core_no==0)
- {
- #if defined (__IS_HOST__)
- clear_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
- #elif defined (__IS_DEVICE__)
- set_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
- #endif
- }
- else
- {
- #if defined (__IS_HOST__)
- clear_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
- #elif defined (__IS_DEVICE__)
- set_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
- #endif
- }
- #endif //defined(__IS_VR9__)
-
-
- // set the HC's byte-order to big-endian
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
- clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- set_bit (AMAZON_SE_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
- clear_bit (AMAZON_SE_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- {
- set_bit (AR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
- clear_bit (AR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
- }
- else
- {
- set_bit (AR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
- clear_bit (AR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
- }
- #endif //defined(__IS_AR9__)
- #if defined(__IS_VR9__)
- if(_core_if->core_no==0)
- {
- set_bit (VR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
- clear_bit (VR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
- }
- else
- {
- set_bit (VR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
- clear_bit (VR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
- }
- #endif //defined(__IS_VR9__)
-
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- set_bit (4, DANUBE_RCU_RESET);
- MDELAY(500);
- clear_bit (4, DANUBE_RCU_RESET);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-
- #if defined(__IS_AMAZON_SE__)
- set_bit (4, AMAZON_SE_RCU_RESET);
- MDELAY(500);
- clear_bit (4, AMAZON_SE_RCU_RESET);
- MDELAY(500);
- #endif //defined(__IS_AMAZON_SE__)
-
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- {
- set_bit (4, AR9_RCU_USBRESET);
- MDELAY(500);
- clear_bit (4, AR9_RCU_USBRESET);
- }
- else
- {
- set_bit (28, AR9_RCU_USBRESET);
- MDELAY(500);
- clear_bit (28, AR9_RCU_USBRESET);
- }
- MDELAY(500);
- #endif //defined(__IS_AR9__)
- #if defined(__IS_VR9__)
- if(!already_hard_reset)
- {
- set_bit (4, VR9_RCU_USBRESET);
- MDELAY(500);
- clear_bit (4, VR9_RCU_USBRESET);
- MDELAY(500);
- already_hard_reset=1;
- }
- #endif //defined(__IS_VR9__)
-
- #if defined(__IS_TWINPASS__)
- ifxusb_enable_afe_oc();
- #endif
-
- if(_core_if->core_global_regs)
- {
- // PHY configurations.
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AR9__)
- #if defined(__IS_VR9__)
- // ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_VR9__)
- }
- #else //defined(__UEIP__)
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined (__IS_HOST__)
- clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
- #elif defined (__IS_DEVICE__)
- set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
- #endif
- #endif //defined(__IS_AMAZON_SE__)
-
- #if defined(__IS_AMAZON_SE__)
- #if defined (__IS_HOST__)
- clear_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
- #elif defined (__IS_DEVICE__)
- set_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
- #endif
- #endif //defined(__IS_AMAZON_SE__)
-
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- {
- #if defined (__IS_HOST__)
- clear_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
- #elif defined (__IS_DEVICE__)
- set_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
- #endif
- }
- else
- {
- #if defined (__IS_HOST__)
- clear_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
- #elif defined (__IS_DEVICE__)
- set_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
- #endif
- }
- #endif //defined(__IS_AR9__)
-
- // set the HC's byte-order to big-endian
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
- clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- set_bit (AMAZON_SE_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
- clear_bit (AMAZON_SE_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- {
- set_bit (AMAZON_S_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
- clear_bit (AMAZON_S_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
- }
- else
- {
- set_bit (AMAZON_S_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
- clear_bit (AMAZON_S_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
- }
- #endif //defined(__IS_AR9__)
-
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- set_bit (4, DANUBE_RCU_RESET);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- set_bit (4, AMAZON_SE_RCU_RESET);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- {
- set_bit (4, AMAZON_S_RCU_USBRESET);
- }
- else
- {
- set_bit (28, AMAZON_S_RCU_USBRESET);
- }
- #endif //defined(__IS_AR9__)
-
- MDELAY(500);
-
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- clear_bit (4, DANUBE_RCU_RESET);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- clear_bit (4, AMAZON_SE_RCU_RESET);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- {
- clear_bit (4, AMAZON_S_RCU_USBRESET);
- }
- else
- {
- clear_bit (28, AMAZON_S_RCU_USBRESET);
- }
- #endif //defined(__IS_AR9__)
-
- MDELAY(500);
-
- #if defined(__IS_TWINPASS__)
- ifxusb_enable_afe_oc();
- #endif
-
- if(_core_if->core_global_regs)
- {
- // PHY configurations.
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
- #endif //defined(__IS_AR9__)
- }
- #endif //defined(__UEIP__)
-}
-
-#if defined(__GADGET_LED__) || defined(__HOST_LED__)
- #if defined(__UEIP__)
- static void *g_usb_led_trigger = NULL;
- #endif
-
- void ifxusb_led_init(ifxusb_core_if_t *_core_if)
- {
- #if defined(__UEIP__)
- if ( !g_usb_led_trigger )
- {
- ifx_led_trigger_register("usb_link", &g_usb_led_trigger);
- if ( g_usb_led_trigger != NULL )
- {
- struct ifx_led_trigger_attrib attrib = {0};
- attrib.delay_on = 250;
- attrib.delay_off = 250;
- attrib.timeout = 2000;
- attrib.def_value = 1;
- attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
- IFX_DEBUGP("Reg USB LED!!\n");
- ifx_led_trigger_set_attrib(g_usb_led_trigger, &attrib);
- }
- }
- #endif //defined(__UEIP__)
- }
-
- void ifxusb_led_free(ifxusb_core_if_t *_core_if)
- {
- #if defined(__UEIP__)
- if ( g_usb_led_trigger )
- {
- ifx_led_trigger_deregister(g_usb_led_trigger);
- g_usb_led_trigger = NULL;
- }
- #endif //defined(__UEIP__)
- }
-
- /*!
- \brief Turn off the USB 5V VBus Power
- \param _core_if Pointer of core_if structure
- */
- void ifxusb_led(ifxusb_core_if_t *_core_if)
- {
- #if defined(__UEIP__)
- if(g_usb_led_trigger)
- ifx_led_trigger_activate(g_usb_led_trigger);
- #else
- #endif //defined(__UEIP__)
- }
-#endif // defined(__GADGET_LED__) || defined(__HOST_LED__)
-
-
-
-#if defined(__IS_HOST__) && defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
-/*!
- \brief Turn on the OC Int
- */
- void ifxusb_oc_int_on()
- {
- #if defined(__UEIP__)
- #else
- #if defined(__IS_TWINPASS__)
- irq_enable(DANUBE_USB_OC_INT);
- #endif
- #endif //defined(__UEIP__)
- }
-/*!
- \brief Turn off the OC Int
- */
- void ifxusb_oc_int_off()
- {
- #if defined(__UEIP__)
- #else
- #if defined(__IS_TWINPASS__)
- irq_disable(DANUBE_USB_OC_INT);
- #endif
- #endif //defined(__UEIP__)
- }
-#endif //defined(__IS_HOST__) && defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
-
-/* internal routines for debugging */
-void ifxusb_dump_msg(const u8 *buf, unsigned int length)
-{
-#ifdef __DEBUG__
- unsigned int start, num, i;
- char line[52], *p;
-
- if (length >= 512)
- return;
- start = 0;
- while (length > 0)
- {
- num = min(length, 16u);
- p = line;
- for (i = 0; i < num; ++i)
- {
- if (i == 8)
- *p++ = ' ';
- sprintf(p, " %02x", buf[i]);
- p += 3;
- }
- *p = 0;
- IFX_PRINT( "%6x: %s\n", start, line);
- buf += num;
- start += num;
- length -= num;
- }
-#endif
-}
-
-/* This functions reads the SPRAM and prints its content */
-void ifxusb_dump_spram(ifxusb_core_if_t *_core_if)
-{
-#ifdef __ENABLE_DUMP__
- volatile uint8_t *addr, *start_addr, *end_addr;
- uint32_t size;
- IFX_PRINT("SPRAM Data:\n");
- start_addr = (void*)_core_if->core_global_regs;
- IFX_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
-
- start_addr = (void*)_core_if->data_fifo_dbg;
- IFX_PRINT("Starting Address: 0x%8X\n", (uint32_t)start_addr);
-
- size=_core_if->hwcfg3.b.dfifo_depth;
- size<<=2;
- size+=0x200;
- size&=0x0003FFFC;
-
- end_addr = (void*)_core_if->data_fifo_dbg;
- end_addr += size;
-
- for(addr = start_addr; addr < end_addr; addr+=16)
- {
- IFX_PRINT("0x%8X:\t%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n", (uint32_t)addr,
- addr[ 0], addr[ 1], addr[ 2], addr[ 3],
- addr[ 4], addr[ 5], addr[ 6], addr[ 7],
- addr[ 8], addr[ 9], addr[10], addr[11],
- addr[12], addr[13], addr[14], addr[15]
- );
- }
- return;
-#endif //__ENABLE_DUMP__
-}
-
-
-
-
-/* This function reads the core global registers and prints them */
-void ifxusb_dump_registers(ifxusb_core_if_t *_core_if)
-{
-#ifdef __ENABLE_DUMP__
- int i;
- volatile uint32_t *addr;
- #ifdef __IS_DEVICE__
- volatile uint32_t *addri,*addro;
- #endif
-
- IFX_PRINT("Core Global Registers\n");
- addr=&_core_if->core_global_regs->gotgctl;
- IFX_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->gotgint;
- IFX_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->gahbcfg;
- IFX_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->gusbcfg;
- IFX_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->grstctl;
- IFX_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->gintsts;
- IFX_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->gintmsk;
- IFX_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->gi2cctl;
- IFX_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->gpvndctl;
- IFX_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->ggpio;
- IFX_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->guid;
- IFX_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->gsnpsid;
- IFX_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->ghwcfg1;
- IFX_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->ghwcfg2;
- IFX_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->ghwcfg3;
- IFX_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->ghwcfg4;
- IFX_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-
- addr=_core_if->pcgcctl;
- IFX_PRINT("PCGCCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-
- addr=&_core_if->core_global_regs->grxfsiz;
- IFX_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-
- #ifdef __IS_HOST__
- addr=&_core_if->core_global_regs->gnptxfsiz;
- IFX_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->core_global_regs->hptxfsiz;
- IFX_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- #endif //__IS_HOST__
-
- #ifdef __IS_DEVICE__
- #ifdef __DED_FIFO__
- addr=&_core_if->core_global_regs->gnptxfsiz;
- IFX_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- for (i=0; i<= _core_if->hwcfg4.b.num_in_eps; i++)
- {
- addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
- IFX_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,ifxusb_rreg(addr));
- }
- #else
- addr=&_core_if->core_global_regs->gnptxfsiz;
- IFX_PRINT("TXFSIZ[00] @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- for (i=0; i< _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
- {
- addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
- IFX_PRINT("TXFSIZ[%02d] @0x%08X : 0x%08X\n",i+1,(uint32_t)addr,ifxusb_rreg(addr));
- }
- #endif
- #endif //__IS_DEVICE__
-
- #ifdef __IS_HOST__
- IFX_PRINT("Host Global Registers\n");
- addr=&_core_if->host_global_regs->hcfg;
- IFX_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->host_global_regs->hfir;
- IFX_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->host_global_regs->hfnum;
- IFX_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->host_global_regs->hptxsts;
- IFX_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->host_global_regs->haint;
- IFX_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->host_global_regs->haintmsk;
- IFX_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr= _core_if->hprt0;
- IFX_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-
- for (i=0; i<MAX_EPS_CHANNELS; i++)
- {
- IFX_PRINT("Host Channel %d Specific Registers\n", i);
- addr=&_core_if->hc_regs[i]->hcchar;
- IFX_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->hc_regs[i]->hcsplt;
- IFX_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->hc_regs[i]->hcint;
- IFX_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->hc_regs[i]->hcintmsk;
- IFX_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->hc_regs[i]->hctsiz;
- IFX_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->hc_regs[i]->hcdma;
- IFX_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- }
- #endif //__IS_HOST__
-
- #ifdef __IS_DEVICE__
- IFX_PRINT("Device Global Registers\n");
- addr=&_core_if->dev_global_regs->dcfg;
- IFX_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->dev_global_regs->dctl;
- IFX_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->dev_global_regs->dsts;
- IFX_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->dev_global_regs->diepmsk;
- IFX_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->dev_global_regs->doepmsk;
- IFX_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->dev_global_regs->daintmsk;
- IFX_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->dev_global_regs->daint;
- IFX_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->dev_global_regs->dvbusdis;
- IFX_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- addr=&_core_if->dev_global_regs->dvbuspulse;
- IFX_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n", (uint32_t)addr,ifxusb_rreg(addr));
-
- addr=&_core_if->dev_global_regs->dtknqr1;
- IFX_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
- if (_core_if->hwcfg2.b.dev_token_q_depth > 6) {
- addr=&_core_if->dev_global_regs->dtknqr2;
- IFX_PRINT("DTKNQR2 @0x%08X : 0x%08X\n", (uint32_t)addr,ifxusb_rreg(addr));
- }
-
- if (_core_if->hwcfg2.b.dev_token_q_depth > 14)
- {
- addr=&_core_if->dev_global_regs->dtknqr3_dthrctl;
- IFX_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n", (uint32_t)addr, ifxusb_rreg(addr));
- }
-
- if (_core_if->hwcfg2.b.dev_token_q_depth > 22)
- {
- addr=&_core_if->dev_global_regs->dtknqr4_fifoemptymsk;
- IFX_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", (uint32_t)addr, ifxusb_rreg(addr));
- }
-
- //for (i=0; i<= MAX_EPS_CHANNELS; i++)
- //for (i=0; i<= 10; i++)
- for (i=0; i<= 3; i++)
- {
- IFX_PRINT("Device EP %d Registers\n", i);
- addri=&_core_if->in_ep_regs[i]->diepctl;addro=&_core_if->out_ep_regs[i]->doepctl;
- IFX_PRINT("DEPCTL I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
- addro=&_core_if->out_ep_regs[i]->doepfn;
- IFX_PRINT("DEPFN I: O: 0x%08X\n",ifxusb_rreg(addro));
- addri=&_core_if->in_ep_regs[i]->diepint;addro=&_core_if->out_ep_regs[i]->doepint;
- IFX_PRINT("DEPINT I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
- addri=&_core_if->in_ep_regs[i]->dieptsiz;addro=&_core_if->out_ep_regs[i]->doeptsiz;
- IFX_PRINT("DETSIZ I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
- addri=&_core_if->in_ep_regs[i]->diepdma;addro=&_core_if->out_ep_regs[i]->doepdma;
- IFX_PRINT("DEPDMA I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
- addri=&_core_if->in_ep_regs[i]->dtxfsts;
- IFX_PRINT("DTXFSTS I: 0x%08X\n",ifxusb_rreg(addri) );
- addri=&_core_if->in_ep_regs[i]->diepdmab;addro=&_core_if->out_ep_regs[i]->doepdmab;
- IFX_PRINT("DEPDMAB I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
- }
- #endif //__IS_DEVICE__
-#endif //__ENABLE_DUMP__
-}
-
-void ifxusb_clean_spram(ifxusb_core_if_t *_core_if,uint32_t dwords)
-{
- volatile uint32_t *addr1,*addr2, *start_addr, *end_addr;
-
- if(!dwords)
- return;
-
- start_addr = (uint32_t *)_core_if->data_fifo_dbg;
-
- end_addr = (uint32_t *)_core_if->data_fifo_dbg;
- end_addr += dwords;
-
- IFX_PRINT("Clearning SPRAM: 0x%8X-0x%8X\n", (uint32_t)start_addr,(uint32_t)end_addr);
- for(addr1 = start_addr; addr1 < end_addr; addr1+=4)
- {
- for(addr2 = addr1; addr2 < addr1+4; addr2++)
- *addr2=0x00000000;
- }
- IFX_PRINT("Clearning SPRAM: 0x%8X-0x%8X Done\n", (uint32_t)start_addr,(uint32_t)end_addr);
- return;
-}
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif.h b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif.h
deleted file mode 100644
index 191781f623..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif.h
+++ /dev/null
@@ -1,665 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxusb_cif.h
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : The Core Interface provides basic services for accessing and
- ** managing the IFX USB hardware. These services are used by both the
- ** Host Controller Driver and the Peripheral Controller Driver.
- ** FUNCTIONS :
- ** COMPILER : gcc
- ** REFERENCE : IFX hardware ref handbook for each plateforms
- ** COPYRIGHT :
- ** Version Control Section **
- ** $Author$
- ** $Date$
- ** $Revisions$
- ** $Log$ Revision history
-*****************************************************************************/
-
-/*!
- \defgroup IFXUSB_DRIVER_V3 IFX USB SS Project
- \brief IFX USB subsystem V3.x
- */
-
-/*!
- \defgroup IFXUSB_CIF Core Interface APIs
- \ingroup IFXUSB_DRIVER_V3
- \brief The Core Interface provides basic services for accessing and
- managing the IFXUSB hardware. These services are used by both the
- Host Controller Driver and the Peripheral Controller Driver.
- */
-
-
-/*!
- \file ifxusb_cif.h
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the interface to the IFX USB Core.
- */
-
-#if !defined(__IFXUSB_CIF_H__)
-#define __IFXUSB_CIF_H__
-
-#include <linux/workqueue.h>
-
-#include <linux/version.h>
-#include <asm/param.h>
-
-#include "ifxusb_plat.h"
-#include "ifxusb_regs.h"
-
-#ifdef __DEBUG__
- #include "linux/timer.h"
-#endif
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define IFXUSB_PARAM_SPEED_HIGH 0
-#define IFXUSB_PARAM_SPEED_FULL 1
-
-#define IFXUSB_EP_SPEED_LOW 0
-#define IFXUSB_EP_SPEED_FULL 1
-#define IFXUSB_EP_SPEED_HIGH 2
-
-#define IFXUSB_EP_TYPE_CTRL 0
-#define IFXUSB_EP_TYPE_ISOC 1
-#define IFXUSB_EP_TYPE_BULK 2
-#define IFXUSB_EP_TYPE_INTR 3
-
-#define IFXUSB_HC_PID_DATA0 0
-#define IFXUSB_HC_PID_DATA2 1
-#define IFXUSB_HC_PID_DATA1 2
-#define IFXUSB_HC_PID_MDATA 3
-#define IFXUSB_HC_PID_SETUP 3
-
-
-/*!
- \addtogroup IFXUSB_CIF
- */
-/*@{*/
-
-/*!
- \struct ifxusb_params
- \brief IFXUSB Parameters structure.
- This structure is used for both importing from insmod stage and run-time storage.
- These parameters define how the IFXUSB controller should be configured.
- */
-typedef struct ifxusb_params
-{
- int32_t dma_burst_size; /*!< The DMA Burst size (applicable only for Internal DMA
- Mode). 0(for single), 1(incr), 4(incr4), 8(incr8) 16(incr16)
- */
- /* Translate this to GAHBCFG values */
- int32_t speed; /*!< Specifies the maximum speed of operation in host and device mode.
- The actual speed depends on the speed of the attached device and
- the value of phy_type. The actual speed depends on the speed of the
- attached device.
- 0 - High Speed (default)
- 1 - Full Speed
- */
-
- int32_t data_fifo_size; /*!< Total number of dwords in the data FIFO memory. This
- memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
- Tx FIFOs.
- 32 to 32768
- */
- #ifdef __IS_DEVICE__
- int32_t rx_fifo_size; /*!< Number of dwords in the Rx FIFO in device mode.
- 16 to 32768
- */
-
-
- int32_t tx_fifo_size[MAX_EPS_CHANNELS]; /*!< Number of dwords in each of the Tx FIFOs in device mode.
- 4 to 768
- */
- #ifdef __DED_FIFO__
- int32_t thr_ctl; /*!< Threshold control on/off */
- int32_t tx_thr_length; /*!< Threshold length for Tx */
- int32_t rx_thr_length; /*!< Threshold length for Rx*/
- #endif
- #else //__IS_HOST__
- int32_t host_channels; /*!< The number of host channel registers to use.
- 1 to 16
- */
-
- int32_t rx_fifo_size; /*!< Number of dwords in the Rx FIFO in host mode.
- 16 to 32768
- */
-
- int32_t nperio_tx_fifo_size;/*!< Number of dwords in the non-periodic Tx FIFO in host mode.
- 16 to 32768
- */
-
- int32_t perio_tx_fifo_size; /*!< Number of dwords in the host periodic Tx FIFO.
- 16 to 32768
- */
- #endif //__IS_HOST__
-
- int32_t max_transfer_size; /*!< The maximum transfer size supported in bytes.
- 2047 to 65,535
- */
-
- int32_t max_packet_count; /*!< The maximum number of packets in a transfer.
- 15 to 511 (default 511)
- */
- int32_t phy_utmi_width; /*!< Specifies the UTMI+ Data Width.
- 8 or 16 bits (default 16)
- */
-
- int32_t turn_around_time_hs; /*!< Specifies the Turn-Around time at HS*/
- int32_t turn_around_time_fs; /*!< Specifies the Turn-Around time at FS*/
-
- int32_t timeout_cal_hs; /*!< Specifies the Timeout_Calibration at HS*/
- int32_t timeout_cal_fs; /*!< Specifies the Timeout_Calibration at FS*/
-} ifxusb_params_t;
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-/*!
- \struct ifxusb_core_if
- \brief The ifx_core_if structure contains information needed to manage
- the IFX USB controller acting in either host or device mode. It
- represents the programming view of the controller as a whole.
- */
-typedef struct ifxusb_core_if
-{
- ifxusb_params_t params; /*!< Run-time Parameters */
-
- uint8_t core_no; /*!< core number (used as id when multi-core case */
- char *core_name; /*!< core name used for registration and informative purpose*/
- int irq; /*!< irq number this core is hooked */
-
- /*****************************************************************
- * Structures and pointers to physical register interface.
- *****************************************************************/
- /** Core Global registers starting at offset 000h. */
- ifxusb_core_global_regs_t *core_global_regs; /*!< pointer to Core Global Registers, offset at 000h */
-
- /** Host-specific registers */
- #ifdef __IS_HOST__
- /** Host Global Registers starting at offset 400h.*/
- ifxusb_host_global_regs_t *host_global_regs; /*!< pointer to Host Global Registers, offset at 400h */
- #define IFXUSB_HOST_GLOBAL_REG_OFFSET 0x400
- /** Host Port 0 Control and Status Register */
- volatile uint32_t *hprt0; /*!< pointer to HPRT0 Registers, offset at 440h */
- #define IFXUSB_HOST_PORT_REGS_OFFSET 0x440
- /** Host Channel Specific Registers at offsets 500h-5FCh. */
- ifxusb_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; /*!< pointer to Host-Channel n Registers, offset at 500h */
- #define IFXUSB_HOST_CHAN_REGS_OFFSET 0x500
- #define IFXUSB_CHAN_REGS_OFFSET 0x20
- #endif
-
- /** Device-specific registers */
- #ifdef __IS_DEVICE__
- /** Device Global Registers starting at offset 800h */
- ifxusb_device_global_regs_t *dev_global_regs; /*!< pointer to Device Global Registers, offset at 800h */
- #define IFXUSB_DEV_GLOBAL_REG_OFFSET 0x800
-
- /** Device Logical IN Endpoint-Specific Registers 900h-AFCh */
- ifxusb_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; /*!< pointer to Device IN-EP Registers, offset at 900h */
- #define IFXUSB_DEV_IN_EP_REG_OFFSET 0x900
- #define IFXUSB_EP_REG_OFFSET 0x20
- /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
- ifxusb_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];/*!< pointer to Device OUT-EP Registers, offset at 900h */
- #define IFXUSB_DEV_OUT_EP_REG_OFFSET 0xB00
- #endif
-
- /** Power and Clock Gating Control Register */
- volatile uint32_t *pcgcctl; /*!< pointer to Power and Clock Gating Control Registers, offset at E00h */
- #define IFXUSB_PCGCCTL_OFFSET 0xE00
-
- /** Push/pop addresses for endpoints or host channels.*/
- uint32_t *data_fifo[MAX_EPS_CHANNELS]; /*!< pointer to FIFO access windows, offset at 1000h */
- #define IFXUSB_DATA_FIFO_OFFSET 0x1000
- #define IFXUSB_DATA_FIFO_SIZE 0x1000
-
- uint32_t *data_fifo_dbg; /*!< pointer to FIFO debug windows, offset at 1000h */
-
- /** Hardware Configuration -- stored here for convenience.*/
- hwcfg1_data_t hwcfg1; /*!< preserved Hardware Configuration 1 */
- hwcfg2_data_t hwcfg2; /*!< preserved Hardware Configuration 2 */
- hwcfg3_data_t hwcfg3; /*!< preserved Hardware Configuration 3 */
- hwcfg4_data_t hwcfg4; /*!< preserved Hardware Configuration 3 */
- uint32_t snpsid; /*!< preserved SNPSID */
-
- /*****************************************************************
- * Run-time informations.
- *****************************************************************/
- /* Set to 1 if the core PHY interface bits in USBCFG have been initialized. */
- uint8_t phy_init_done; /*!< indicated PHY is initialized. */
-
- #ifdef __IS_HOST__
- uint8_t queuing_high_bandwidth; /*!< Host mode, Queueing High Bandwidth. */
- #endif
-} ifxusb_core_if_t;
-
-/*@}*//*IFXUSB_CIF*/
-
-
-/*!
- \fn void *ifxusb_alloc_buf(size_t size, int clear)
- \brief This function is called to allocate buffer of specified size.
- The allocated buffer is mapped into DMA accessable address.
- \param size Size in BYTE to be allocated
- \param clear 0: don't do clear after buffer allocated, other: do clear to zero
- \return 0/NULL: Fail; uncached pointer of allocated buffer
- \ingroup IFXUSB_CIF
- */
-extern void *ifxusb_alloc_buf(size_t size, int clear);
-
-/*!
- \fn void ifxusb_free_buf(void *vaddr)
- \brief This function is called to free allocated buffer.
- \param vaddr the uncached pointer of the buffer
- \ingroup IFXUSB_CIF
- */
-extern void ifxusb_free_buf(void *vaddr);
-
-/*!
- \fn int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
- int _irq,
- uint32_t _reg_base_addr,
- uint32_t _fifo_base_addr,
- uint32_t _fifo_dbg_addr)
- \brief This function is called to initialize the IFXUSB CSR data
- structures. The register addresses in the device and host
- structures are initialized from the base address supplied by the
- caller. The calling function must make the OS calls to get the
- base address of the IFXUSB controller registers.
- \param _core_if Pointer of core_if structure
- \param _irq irq number
- \param _reg_base_addr Base address of IFXUSB core registers
- \param _fifo_base_addr Fifo base address
- \param _fifo_dbg_addr Fifo debug address
- \return 0: success;
- \ingroup IFXUSB_CIF
- */
-extern int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
- int _irq,
- uint32_t _reg_base_addr,
- uint32_t _fifo_base_addr,
- uint32_t _fifo_dbg_addr);
-
-
-/*!
- \fn void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if)
- \brief This function free the mapped address in the IFXUSB CSR data structures.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
-extern void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if);
-
-/*!
- \fn void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if )
- \brief This function enbles the controller's Global Interrupt in the AHB Config register.
- \param _core_if Pointer of core_if structure
- */
-extern void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if );
-
-/*!
- \fn void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if )
- \brief This function disables the controller's Global Interrupt in the AHB Config register.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
-extern void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if );
-
-/*!
- \fn void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num )
- \brief Flush a Tx FIFO.
- \param _core_if Pointer of core_if structure
- \param _num Tx FIFO to flush. ( 0x10 for ALL TX FIFO )
- \ingroup IFXUSB_CIF
- */
-extern void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num );
-
-/*!
- \fn void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if )
- \brief Flush Rx FIFO.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
-extern void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if );
-
-/*!
- \fn void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if )
- \brief Flush ALL Rx and Tx FIFO.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
-extern void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if );
-
-
-/*!
- \fn int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if)
- \brief Do core a soft reset of the core. Be careful with this because it
- resets all the internal state machines of the core.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
-extern int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if);
-
-
-/*!
- \brief Turn on the USB Core Power
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
-*/
-extern void ifxusb_power_on (ifxusb_core_if_t *_core_if);
-
-/*!
- \fn void ifxusb_power_off (ifxusb_core_if_t *_core_if)
- \brief Turn off the USB Core Power
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
-*/
-extern void ifxusb_power_off (ifxusb_core_if_t *_core_if);
-
-/*!
- \fn void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if)
- \brief Turn on the USB PHY Power
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
-*/
-extern void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if);
-
-/*!
- \fn void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if)
- \brief Turn off the USB PHY Power
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
-*/
-extern void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if);
-
-/*!
- \fn void ifxusb_hard_reset(ifxusb_core_if_t *_core_if)
- \brief Reset on the USB Core RCU
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
-extern void ifxusb_hard_reset(ifxusb_core_if_t *_core_if);
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-
-#ifdef __IS_HOST__
- /*!
- \fn void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
- \brief This function initializes the IFXUSB controller registers for Host mode.
- This function flushes the Tx and Rx FIFOs and it flushes any entries in the
- request queues.
- \param _core_if Pointer of core_if structure
- \param _params parameters to be set
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params);
-
- /*!
- \fn void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if)
- \brief This function enables the Host mode interrupts.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if);
-
- /*!
- \fn void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if)
- \brief This function disables the Host mode interrupts.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if);
-
- #if defined(__IS_TWINPASS__)
- extern void ifxusb_enable_afe_oc(void);
- #endif
-
- /*!
- \fn void ifxusb_vbus_init(ifxusb_core_if_t *_core_if)
- \brief This function init the VBUS control.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_vbus_init(ifxusb_core_if_t *_core_if);
-
- /*!
- \fn void ifxusb_vbus_free(ifxusb_core_if_t *_core_if)
- \brief This function free the VBUS control.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_vbus_free(ifxusb_core_if_t *_core_if);
-
- /*!
- \fn void ifxusb_vbus_on(ifxusb_core_if_t *_core_if)
- \brief Turn on the USB 5V VBus Power
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_vbus_on(ifxusb_core_if_t *_core_if);
-
- /*!
- \fn void ifxusb_vbus_off(ifxusb_core_if_t *_core_if)
- \brief Turn off the USB 5V VBus Power
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_vbus_off(ifxusb_core_if_t *_core_if);
-
- /*!
- \fn int ifxusb_vbus(ifxusb_core_if_t *_core_if)
- \brief Read Current VBus status
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern int ifxusb_vbus(ifxusb_core_if_t *_core_if);
-
- #if defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
- /*!
- \fn void ifxusb_oc_int_on(void)
- \brief Turn on the OC interrupt
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_oc_int_on(void);
-
- /*!
- \fn void ifxusb_oc_int_off(void)
- \brief Turn off the OC interrupt
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_oc_int_off(void);
- #endif //defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
-#endif
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-
-#ifdef __IS_DEVICE__
- /*!
- \fn void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if)
- \brief This function enables the Device mode interrupts.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if);
-
- /*!
- \fn uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if)
- \brief Gets the current USB frame number. This is the frame number from the last SOF packet.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if);
-
- /*!
- \fn void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in)
- \brief Set the EP STALL.
- \param _core_if Pointer of core_if structure
- \param _epno EP number
- \param _is_in 1: is IN transfer
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in);
-
- /*!
- \fn void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in)
- \brief Set the EP STALL.
- \param _core_if Pointer of core_if structure
- \param _epno EP number
- \param _ep_type EP Type
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in);
-
- /*!
- \fn void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
- \brief This function initializes the IFXUSB controller registers for Device mode.
- This function flushes the Tx and Rx FIFOs and it flushes any entries in the
- request queues.
- This function validate the imported parameters and store the result in the CIF structure.
- After
- \param _core_if Pointer of core_if structure
- \param _params structure of inported parameters
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params);
-#endif
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#if defined(__GADGET_LED__) || defined(__HOST_LED__)
- /*!
- \fn void ifxusb_led_init(ifxusb_core_if_t *_core_if)
- \brief This function init the LED control.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_led_init(ifxusb_core_if_t *_core_if);
-
- /*!
- \fn void ifxusb_led_free(ifxusb_core_if_t *_core_if)
- \brief This function free the LED control.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_led_free(ifxusb_core_if_t *_core_if);
-
- /*!
- \fn void ifxusb_led(ifxusb_core_if_t *_core_if)
- \brief This function trigger the LED access.
- \param _core_if Pointer of core_if structure
- \ingroup IFXUSB_CIF
- */
- extern void ifxusb_led(ifxusb_core_if_t *_core_if);
-#endif
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-/* internal routines for debugging */
-extern void ifxusb_dump_msg(const u8 *buf, unsigned int length);
-extern void ifxusb_dump_spram(ifxusb_core_if_t *_core_if);
-extern void ifxusb_dump_registers(ifxusb_core_if_t *_core_if);
-extern void ifxusb_clean_spram(ifxusb_core_if_t *_core_if,uint32_t dwords);
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-static inline uint32_t ifxusb_read_core_intr(ifxusb_core_if_t *_core_if)
-{
- return (ifxusb_rreg(&_core_if->core_global_regs->gintsts) &
- (ifxusb_rreg(&_core_if->core_global_regs->gintmsk)
-#ifdef __USE_TIMER_4_SOF__
- | IFXUSB_SOF_INTR_MASK
-#endif
- ));
-}
-
-static inline uint32_t ifxusb_read_otg_intr (ifxusb_core_if_t *_core_if)
-{
- return (ifxusb_rreg (&_core_if->core_global_regs->gotgint));
-}
-
-static inline uint32_t ifxusb_mode(ifxusb_core_if_t *_core_if)
-{
- return (ifxusb_rreg( &_core_if->core_global_regs->gintsts ) & 0x1);
-}
-static inline uint8_t ifxusb_is_device_mode(ifxusb_core_if_t *_core_if)
-{
- return (ifxusb_mode(_core_if) != 1);
-}
-static inline uint8_t ifxusb_is_host_mode(ifxusb_core_if_t *_core_if)
-{
- return (ifxusb_mode(_core_if) == 1);
-}
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#ifdef __IS_HOST__
- static inline uint32_t ifxusb_read_hprt0(ifxusb_core_if_t *_core_if)
- {
- hprt0_data_t hprt0;
- hprt0.d32 = ifxusb_rreg(_core_if->hprt0);
- hprt0.b.prtena = 0;
- hprt0.b.prtconndet = 0;
- hprt0.b.prtenchng = 0;
- hprt0.b.prtovrcurrchng = 0;
- return hprt0.d32;
- }
-
- static inline uint32_t ifxusb_read_host_all_channels_intr (ifxusb_core_if_t *_core_if)
- {
- return (ifxusb_rreg (&_core_if->host_global_regs->haint));
- }
-
- static inline uint32_t ifxusb_read_host_channel_intr (ifxusb_core_if_t *_core_if, int hc_num)
- {
- return (ifxusb_rreg (&_core_if->hc_regs[hc_num]->hcint));
- }
-#endif
-
-#ifdef __IS_DEVICE__
- static inline uint32_t ifxusb_read_dev_all_in_ep_intr(ifxusb_core_if_t *_core_if)
- {
- uint32_t v;
- v = ifxusb_rreg(&_core_if->dev_global_regs->daint) &
- ifxusb_rreg(&_core_if->dev_global_regs->daintmsk);
- return (v & 0xffff);
- }
-
- static inline uint32_t ifxusb_read_dev_all_out_ep_intr(ifxusb_core_if_t *_core_if)
- {
- uint32_t v;
- v = ifxusb_rreg(&_core_if->dev_global_regs->daint) &
- ifxusb_rreg(&_core_if->dev_global_regs->daintmsk);
- return ((v & 0xffff0000) >> 16);
- }
-
- static inline uint32_t ifxusb_read_dev_in_ep_intr(ifxusb_core_if_t *_core_if, int _ep_num)
- {
- uint32_t v;
- v = ifxusb_rreg(&_core_if->in_ep_regs[_ep_num]->diepint) &
- ifxusb_rreg(&_core_if->dev_global_regs->diepmsk);
- return v;
- }
-
- static inline uint32_t ifxusb_read_dev_out_ep_intr(ifxusb_core_if_t *_core_if, int _ep_num)
- {
- uint32_t v;
- v = ifxusb_rreg(&_core_if->out_ep_regs[_ep_num]->doepint) &
- ifxusb_rreg(&_core_if->dev_global_regs->doepmsk);
- return v;
- }
-
-#endif
-
-extern void ifxusb_attr_create (void *_dev);
-
-extern void ifxusb_attr_remove (void *_dev);
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#endif // !defined(__IFXUSB_CIF_H__)
-
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif_d.c b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif_d.c
deleted file mode 100644
index 36ab0e75bf..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif_d.c
+++ /dev/null
@@ -1,458 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxusb_cif_d.c
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : The Core Interface provides basic services for accessing and
- ** managing the IFX USB hardware. These services are used by the
- ** Peripheral Controller Driver only.
- *****************************************************************************/
-
-/*!
- \file ifxusb_cif_d.c
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the interface to the IFX USB Core.
-*/
-
-#include <linux/version.h>
-#include "ifxusb_version.h"
-
-
-#include <asm/byteorder.h>
-#include <asm/unaligned.h>
-
-#ifdef __DEBUG__
- #include <linux/jiffies.h>
-#endif
-
-#include "ifxusb_plat.h"
-#include "ifxusb_regs.h"
-#include "ifxusb_cif.h"
-
-#include "ifxpcd.h"
-
-
-
-/*!
- \brief Initializes the DevSpd field of the DCFG register depending on the PHY type
- and the enumeration speed of the device.
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_dev_init_spd(ifxusb_core_if_t *_core_if)
-{
- uint32_t val;
- dcfg_data_t dcfg;
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- if (_core_if->params.speed == IFXUSB_PARAM_SPEED_FULL)
- /* High speed PHY running at full speed */
- val = 0x1;
- else
- /* High speed PHY running at high speed and full speed*/
- val = 0x0;
-
- IFX_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
- dcfg.d32 = ifxusb_rreg(&_core_if->dev_global_regs->dcfg);
- dcfg.b.devspd = val;
- ifxusb_wreg(&_core_if->dev_global_regs->dcfg, dcfg.d32);
-}
-
-
-/*!
- \brief This function enables the Device mode interrupts.
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if)
-{
- gint_data_t intr_mask ={ .d32 = 0};
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- IFX_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-
- /* Clear any pending OTG Interrupts */
- ifxusb_wreg( &global_regs->gotgint, 0xFFFFFFFF);
-
- /* Clear any pending interrupts */
- ifxusb_wreg( &global_regs->gintsts, 0xFFFFFFFF);
-
- /* Enable the interrupts in the GINTMSK.*/
- intr_mask.b.modemismatch = 1;
- intr_mask.b.conidstschng = 1;
- intr_mask.b.wkupintr = 1;
- intr_mask.b.disconnect = 1;
- intr_mask.b.usbsuspend = 1;
-
- intr_mask.b.usbreset = 1;
- intr_mask.b.enumdone = 1;
- intr_mask.b.inepintr = 1;
- intr_mask.b.outepintr = 1;
- intr_mask.b.erlysuspend = 1;
- #ifndef __DED_FIFO__
-// intr_mask.b.epmismatch = 1;
- #endif
-
- ifxusb_mreg( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
- IFX_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ifxusb_rreg( &global_regs->gintmsk));
-}
-
-/*!
- \brief Gets the current USB frame number. This is the frame number from the last SOF packet.
- \param _core_if Pointer of core_if structure
- */
-uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if)
-{
- dsts_data_t dsts;
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- dsts.d32 = ifxusb_rreg(&_core_if->dev_global_regs->dsts);
- /* read current frame/microfreme number from DSTS register */
- return dsts.b.soffn;
-}
-
-
-/*!
- \brief Set the EP STALL.
- */
-void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in)
-{
- depctl_data_t depctl;
- volatile uint32_t *depctl_addr;
-
- IFX_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _epno, (_is_in?"IN":"OUT"));
-
- depctl_addr = (_is_in)? (&(_core_if->in_ep_regs [_epno]->diepctl)):
- (&(_core_if->out_ep_regs[_epno]->doepctl));
- depctl.d32 = ifxusb_rreg(depctl_addr);
- depctl.b.stall = 1;
-
- if (_is_in && depctl.b.epena)
- depctl.b.epdis = 1;
-
- ifxusb_wreg(depctl_addr, depctl.d32);
- IFX_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",ifxusb_rreg(depctl_addr));
- return;
-}
-
-/*!
-\brief Clear the EP STALL.
- */
-void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in)
-{
- depctl_data_t depctl;
- volatile uint32_t *depctl_addr;
-
- IFX_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _epno, (_is_in?"IN":"OUT"));
-
- depctl_addr = (_is_in)? (&(_core_if->in_ep_regs [_epno]->diepctl)):
- (&(_core_if->out_ep_regs[_epno]->doepctl));
-
- depctl.d32 = ifxusb_rreg(depctl_addr);
- /* clear the stall bits */
- depctl.b.stall = 0;
-
- /*
- * USB Spec 9.4.5: For endpoints using data toggle, regardless
- * of whether an endpoint has the Halt feature set, a
- * ClearFeature(ENDPOINT_HALT) request always results in the
- * data toggle being reinitialized to DATA0.
- */
- if (_ep_type == IFXUSB_EP_TYPE_INTR || _ep_type == IFXUSB_EP_TYPE_BULK)
- depctl.b.setd0pid = 1; /* DATA0 */
-
- ifxusb_wreg(depctl_addr, depctl.d32);
- IFX_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",ifxusb_rreg(depctl_addr));
- return;
-}
-
-/*!
- \brief This function initializes the IFXUSB controller registers for Device mode.
- This function flushes the Tx and Rx FIFOs and it flushes any entries in the
- request queues.
- \param _core_if Pointer of core_if structure
- \param _params parameters to be set
- */
-void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
-{
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-
- gusbcfg_data_t usbcfg ={.d32 = 0};
- gahbcfg_data_t ahbcfg ={.d32 = 0};
- dcfg_data_t dcfg ={.d32 = 0};
- grstctl_t resetctl ={.d32 = 0};
- gotgctl_data_t gotgctl ={.d32 = 0};
-
- uint32_t dir;
- int i;
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- IFX_DEBUGPL(DBG_CILV, "%s(%p)\n",__func__,_core_if);
-
- /* Copy Params */
- _core_if->params.dma_burst_size = _params->dma_burst_size;
- _core_if->params.speed = _params->speed;
- if(_params->max_transfer_size < 2048 || _params->max_transfer_size > ((1 << (_core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1) )
- _core_if->params.max_transfer_size = ((1 << (_core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1);
- else
- _core_if->params.max_transfer_size = _params->max_transfer_size;
-
- if(_params->max_packet_count < 16 || _params->max_packet_count > ((1 << (_core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1) )
- _core_if->params.max_packet_count= ((1 << (_core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1);
- else
- _core_if->params.max_packet_count= _params->max_packet_count;
- _core_if->params.phy_utmi_width = _params->phy_utmi_width;
- _core_if->params.turn_around_time_hs = _params->turn_around_time_hs;
- _core_if->params.turn_around_time_fs = _params->turn_around_time_fs;
- _core_if->params.timeout_cal_hs = _params->timeout_cal_hs;
- _core_if->params.timeout_cal_fs = _params->timeout_cal_fs;
-
- #ifdef __DED_FIFO__
- _core_if->params.thr_ctl = _params->thr_ctl;
- _core_if->params.tx_thr_length = _params->tx_thr_length;
- _core_if->params.rx_thr_length = _params->rx_thr_length;
- #endif
-
- /* Reset the Controller */
- do
- {
- while(ifxusb_core_soft_reset( _core_if ))
- ifxusb_hard_reset(_core_if);
- } while (ifxusb_is_host_mode(_core_if));
-
- usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
- #if 0
- #if defined(__DED_FIFO__)
- usbcfg.b.ForceDevMode = 1;
- usbcfg.b.ForceHstMode = 0;
- #endif
- #endif
- usbcfg.b.term_sel_dl_pulse = 0;
- ifxusb_wreg (&global_regs->gusbcfg, usbcfg.d32);
-
- /* This programming sequence needs to happen in FS mode before any other
- * programming occurs */
- /* High speed PHY. */
- if (!_core_if->phy_init_done)
- {
- _core_if->phy_init_done = 1;
- /* HS PHY parameters. These parameters are preserved
- * during soft reset so only program the first time. Do
- * a soft reset immediately after setting phyif. */
- usbcfg.b.ulpi_utmi_sel = 0; //UTMI+
- usbcfg.b.phyif = ( _core_if->params.phy_utmi_width == 16)?1:0;
- ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
- /* Reset after setting the PHY parameters */
- ifxusb_core_soft_reset( _core_if );
- }
-
- /* Program the GAHBCFG Register.*/
- switch (_core_if->params.dma_burst_size)
- {
- case 0 :
- ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE;
- break;
- case 1 :
- ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR;
- break;
- case 4 :
- ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4;
- break;
- case 8 :
- ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8;
- break;
- case 16:
- ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16;
- break;
- }
- ahbcfg.b.dmaenable = 1;
- ifxusb_wreg(&global_regs->gahbcfg, ahbcfg.d32);
-
- /* Program the GUSBCFG register. */
- usbcfg.d32 = ifxusb_rreg( &global_regs->gusbcfg );
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = 0;
- ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
-
- /* Restart the Phy Clock */
- ifxusb_wreg(_core_if->pcgcctl, 0);
-
- /* Device configuration register */
- ifxusb_dev_init_spd(_core_if);
- dcfg.d32 = ifxusb_rreg( &_core_if->dev_global_regs->dcfg);
- dcfg.b.perfrint = IFXUSB_DCFG_FRAME_INTERVAL_80;
- #if defined(__DED_FIFO__)
- #if defined(__DESC_DMA__)
- dcfg.b.descdma = 1;
- #else
- dcfg.b.descdma = 0;
- #endif
- #endif
-
- ifxusb_wreg( &_core_if->dev_global_regs->dcfg, dcfg.d32 );
-
- /* Configure data FIFO sizes */
- _core_if->params.data_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
- _core_if->params.rx_fifo_size = ifxusb_rreg(&global_regs->grxfsiz);
- IFX_DEBUGPL(DBG_CIL, "Initial: FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
- IFX_DEBUGPL(DBG_CIL, " Rx FIFO Size=0x%06X\n", _core_if->params.rx_fifo_size);
-
- _core_if->params.tx_fifo_size[0]= ifxusb_rreg(&global_regs->gnptxfsiz) >> 16;
-
- #ifdef __DED_FIFO__
- for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
- _core_if->params.tx_fifo_size[i] =
- ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i-1]) >> 16;
- #else
- for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
- _core_if->params.tx_fifo_size[i+1] =
- ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
- #endif
-
- #ifdef __DEBUG__
- #ifdef __DED_FIFO__
- for (i=0; i <= _core_if->hwcfg4.b.num_in_eps; i++)
- IFX_DEBUGPL(DBG_CIL, " Tx[%02d] FIFO Size=0x%06X\n",i, _core_if->params.tx_fifo_size[i]);
- #else
- IFX_DEBUGPL(DBG_CIL, " NPTx FIFO Size=0x%06X\n", _core_if->params.tx_fifo_size[0]);
- for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
- IFX_DEBUGPL(DBG_CIL, " PTx[%02d] FIFO Size=0x%06X\n",i, _core_if->params.tx_fifo_size[i+1]);
- #endif
- #endif
-
- {
- fifosize_data_t txfifosize;
- if(_params->data_fifo_size >=0 && _params->data_fifo_size < _core_if->params.data_fifo_size)
- _core_if->params.data_fifo_size = _params->data_fifo_size;
-
-
- if(_params->rx_fifo_size >=0 && _params->rx_fifo_size < _core_if->params.rx_fifo_size)
- _core_if->params.rx_fifo_size = _params->rx_fifo_size;
- if(_core_if->params.data_fifo_size < _core_if->params.rx_fifo_size)
- _core_if->params.rx_fifo_size = _core_if->params.data_fifo_size;
- ifxusb_wreg( &global_regs->grxfsiz, _core_if->params.rx_fifo_size);
-
- for (i=0; i < MAX_EPS_CHANNELS; i++)
- if(_params->tx_fifo_size[i] >=0 && _params->tx_fifo_size[i] < _core_if->params.tx_fifo_size[i])
- _core_if->params.tx_fifo_size[i] = _params->tx_fifo_size[i];
-
- txfifosize.b.startaddr = _core_if->params.rx_fifo_size;
- #ifdef __DED_FIFO__
- if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[0] > _core_if->params.data_fifo_size)
- _core_if->params.tx_fifo_size[0]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
- txfifosize.b.depth=_core_if->params.tx_fifo_size[0];
- ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
- txfifosize.b.startaddr += _core_if->params.tx_fifo_size[0];
- for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
- {
- if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[i] > _core_if->params.data_fifo_size)
- _core_if->params.tx_fifo_size[i]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
- txfifosize.b.depth=_core_if->params.tx_fifo_size[i];
- ifxusb_wreg( &global_regs->dptxfsiz_dieptxf[i-1], txfifosize.d32);
- txfifosize.b.startaddr += _core_if->params.tx_fifo_size[i];
- }
- #else
- if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[0] > _core_if->params.data_fifo_size)
- _core_if->params.tx_fifo_size[0]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
- txfifosize.b.depth=_core_if->params.tx_fifo_size[0];
- ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
- txfifosize.b.startaddr += _core_if->params.tx_fifo_size[0];
- for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
- {
- if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[i+1] > _core_if->params.data_fifo_size)
- _core_if->params.tx_fifo_size[i+1]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
- //txfifosize.b.depth=_core_if->params.tx_fifo_size[i+1];
- ifxusb_wreg( &global_regs->dptxfsiz_dieptxf[i], txfifosize.d32);
- txfifosize.b.startaddr += _core_if->params.tx_fifo_size[i+1];
- }
- #endif
- }
-
- #ifdef __DEBUG__
- {
- fifosize_data_t fifosize;
- IFX_DEBUGPL(DBG_CIL, "Result : FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
-
- IFX_DEBUGPL(DBG_CIL, " Rx FIFO =0x%06X Sz=0x%06X\n", 0,ifxusb_rreg(&global_regs->grxfsiz));
- #ifdef __DED_FIFO__
- fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
- IFX_DEBUGPL(DBG_CIL, " Tx[00] FIFO =0x%06X Sz=0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
- for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
- {
- fifosize.d32=ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i-1]);
- IFX_DEBUGPL(DBG_CIL, " Tx[%02d] FIFO 0x%06X Sz=0x%06X\n",i, fifosize.b.startaddr,fifosize.b.depth);
- }
- #else
- fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
- IFX_DEBUGPL(DBG_CIL, " NPTx FIFO =0x%06X Sz=0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
- for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
- {
- fifosize.d32=ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i]);
- IFX_DEBUGPL(DBG_CIL, " PTx[%02d] FIFO 0x%06X Sz=0x%06X\n",i, fifosize.b.startaddr,fifosize.b.depth);
- }
- #endif
- }
- #endif
-
- /* Clear Host Set HNP Enable in the OTG Control Register */
- gotgctl.b.hstsethnpen = 1;
- ifxusb_mreg( &global_regs->gotgctl, gotgctl.d32, 0);
-
- /* Flush the FIFOs */
- ifxusb_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
- ifxusb_flush_rx_fifo(_core_if);
-
- /* Flush the Learning Queue. */
- resetctl.b.intknqflsh = 1;
- ifxusb_wreg( &global_regs->grstctl, resetctl.d32);
-
- /* Clear all pending Device Interrupts */
- ifxusb_wreg( &_core_if->dev_global_regs->diepmsk , 0 );
- ifxusb_wreg( &_core_if->dev_global_regs->doepmsk , 0 );
- ifxusb_wreg( &_core_if->dev_global_regs->daint , 0xFFFFFFFF );
- ifxusb_wreg( &_core_if->dev_global_regs->daintmsk, 0 );
-
- dir=_core_if->hwcfg1.d32;
- for (i=0; i <= _core_if->hwcfg2.b.num_dev_ep ; i++,dir>>=2)
- {
- depctl_data_t depctl;
- if((dir&0x03)==0 || (dir&0x03) ==1)
- {
- depctl.d32 = ifxusb_rreg(&_core_if->in_ep_regs[i]->diepctl);
- if (depctl.b.epena)
- {
- depctl.d32 = 0;
- depctl.b.epdis = 1;
- depctl.b.snak = 1;
- }
- else
- depctl.d32 = 0;
- ifxusb_wreg( &_core_if->in_ep_regs[i]->diepctl, depctl.d32);
- #ifndef __DESC_DMA__
- ifxusb_wreg( &_core_if->in_ep_regs[i]->dieptsiz, 0);
- #endif
- ifxusb_wreg( &_core_if->in_ep_regs[i]->diepdma, 0);
- ifxusb_wreg( &_core_if->in_ep_regs[i]->diepint, 0xFF);
- }
-
- if((dir&0x03)==0 || (dir&0x03) ==2)
- {
- depctl.d32 = ifxusb_rreg(&_core_if->out_ep_regs[i]->doepctl);
- if (depctl.b.epena)
- {
- depctl.d32 = 0;
- depctl.b.epdis = 1;
- depctl.b.snak = 1;
- }
- else
- depctl.d32 = 0;
- ifxusb_wreg( &_core_if->out_ep_regs[i]->doepctl, depctl.d32);
- #ifndef __DESC_DMA__
- ifxusb_wreg( &_core_if->out_ep_regs[i]->doeptsiz, 0);
- #endif
- ifxusb_wreg( &_core_if->out_ep_regs[i]->doepdma, 0);
- ifxusb_wreg( &_core_if->out_ep_regs[i]->doepint, 0xFF);
- }
- }
-}
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif_h.c b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif_h.c
deleted file mode 100644
index 0f47ecd1ab..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_cif_h.c
+++ /dev/null
@@ -1,846 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxusb_cif_h.c
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : The Core Interface provides basic services for accessing and
- ** managing the IFX USB hardware. These services are used by the
- ** Host Controller Driver only.
- *****************************************************************************/
-
-/*!
- \file ifxusb_cif_h.c
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the interface to the IFX USB Core.
-*/
-#include <linux/version.h>
-#include "ifxusb_version.h"
-
-#include <asm/byteorder.h>
-#include <asm/unaligned.h>
-
-#ifdef __DEBUG__
- #include <linux/jiffies.h>
-#endif
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#if defined(__UEIP__)
-// #include <asm/ifx/ifx_board.h>
-#endif
-
-//#include <asm/ifx/ifx_gpio.h>
-#if defined(__UEIP__)
-// #include <asm/ifx/ifx_led.h>
-#endif
-
-#include "ifxusb_plat.h"
-#include "ifxusb_regs.h"
-#include "ifxusb_cif.h"
-
-#include "ifxhcd.h"
-
-#if !defined(__UEIP__)
- #undef __USING_LED_AS_GPIO__
-#endif
-
-
-/*!
- \brief This function enables the Host mode interrupts.
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if)
-{
- gint_data_t intr_mask ={ .d32 = 0};
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-
- IFX_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-
- /* Clear any pending OTG Interrupts */
- ifxusb_wreg( &global_regs->gotgint, 0xFFFFFFFF);
-
- /* Clear any pending interrupts */
- ifxusb_wreg( &global_regs->gintsts, 0xFFFFFFFF);
-
- /* Enable the interrupts in the GINTMSK.*/
-
- /* Common interrupts */
- intr_mask.b.modemismatch = 1;
- intr_mask.b.conidstschng = 1;
- intr_mask.b.wkupintr = 1;
- intr_mask.b.disconnect = 1;
- intr_mask.b.usbsuspend = 1;
-
- /* Host interrupts */
- intr_mask.b.sofintr = 1;
- intr_mask.b.portintr = 1;
- intr_mask.b.hcintr = 1;
-
- ifxusb_mreg( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
- IFX_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ifxusb_rreg( &global_regs->gintmsk));
-}
-
-/*!
- \brief This function disables the Host mode interrupts.
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if)
-{
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-
- IFX_DEBUGPL(DBG_CILV, "%s()\n", __func__);
-
- #if 1
- ifxusb_wreg( &global_regs->gintmsk, 0);
- #else
- /* Common interrupts */
- {
- gint_data_t intr_mask ={.d32 = 0};
- intr_mask.b.modemismatch = 1;
- intr_mask.b.rxstsqlvl = 1;
- intr_mask.b.conidstschng = 1;
- intr_mask.b.wkupintr = 1;
- intr_mask.b.disconnect = 1;
- intr_mask.b.usbsuspend = 1;
-
- /* Host interrupts */
- intr_mask.b.sofintr = 1;
- intr_mask.b.portintr = 1;
- intr_mask.b.hcintr = 1;
- intr_mask.b.ptxfempty = 1;
- intr_mask.b.nptxfempty = 1;
- ifxusb_mreg(&global_regs->gintmsk, intr_mask.d32, 0);
- }
- #endif
-}
-
-/*!
- \brief This function initializes the IFXUSB controller registers for Host mode.
- This function flushes the Tx and Rx FIFOs and it flushes any entries in the
- request queues.
- \param _core_if Pointer of core_if structure
- \param _params parameters to be set
- */
-void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
-{
- ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-
- gusbcfg_data_t usbcfg ={.d32 = 0};
- gahbcfg_data_t ahbcfg ={.d32 = 0};
- gotgctl_data_t gotgctl ={.d32 = 0};
-
- int i;
-
- IFX_DEBUGPL(DBG_CILV, "%s(%p)\n",__func__,_core_if);
-
- /* Copy Params */
-
- _core_if->params.dma_burst_size = _params->dma_burst_size;
- _core_if->params.speed = _params->speed;
- _core_if->params.max_transfer_size = _params->max_transfer_size;
- _core_if->params.max_packet_count = _params->max_packet_count;
- _core_if->params.phy_utmi_width = _params->phy_utmi_width;
- _core_if->params.turn_around_time_hs = _params->turn_around_time_hs;
- _core_if->params.turn_around_time_fs = _params->turn_around_time_fs;
- _core_if->params.timeout_cal_hs = _params->timeout_cal_hs;
- _core_if->params.timeout_cal_fs = _params->timeout_cal_fs;
-
- /* Reset the Controller */
- do
- {
- while(ifxusb_core_soft_reset( _core_if ))
- ifxusb_hard_reset(_core_if);
- } while (ifxusb_is_device_mode(_core_if));
-
- usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
-// usbcfg.b.ulpi_ext_vbus_drv = 1;
- usbcfg.b.term_sel_dl_pulse = 0;
- ifxusb_wreg (&global_regs->gusbcfg, usbcfg.d32);
-
- /* This programming sequence needs to happen in FS mode before any other
- * programming occurs */
- /* High speed PHY. */
- if (!_core_if->phy_init_done)
- {
- _core_if->phy_init_done = 1;
- /* HS PHY parameters. These parameters are preserved
- * during soft reset so only program the first time. Do
- * a soft reset immediately after setting phyif. */
- usbcfg.b.ulpi_utmi_sel = 0; //UTMI+
- usbcfg.b.phyif = ( _core_if->params.phy_utmi_width == 16)?1:0;
- ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
- /* Reset after setting the PHY parameters */
- ifxusb_core_soft_reset( _core_if );
- }
-
- usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
-// usbcfg.b.ulpi_fsls = 0;
-// usbcfg.b.ulpi_clk_sus_m = 0;
- ifxusb_wreg(&global_regs->gusbcfg, usbcfg.d32);
-
- /* Program the GAHBCFG Register.*/
- switch (_core_if->params.dma_burst_size)
- {
- case 0 :
- ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE;
- break;
- case 1 :
- ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR;
- break;
- case 4 :
- ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4;
- break;
- case 8 :
- ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8;
- break;
- case 16:
- ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16;
- break;
- }
- ahbcfg.b.dmaenable = 1;
- ifxusb_wreg(&global_regs->gahbcfg, ahbcfg.d32);
-
- /* Program the GUSBCFG register. */
- usbcfg.d32 = ifxusb_rreg( &global_regs->gusbcfg );
- usbcfg.b.hnpcap = 0;
- usbcfg.b.srpcap = 0;
- ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
-
- /* Restart the Phy Clock */
- ifxusb_wreg(_core_if->pcgcctl, 0);
-
- /* Initialize Host Configuration Register */
- {
- hcfg_data_t hcfg;
- hcfg.d32 = ifxusb_rreg(&_core_if->host_global_regs->hcfg);
- hcfg.b.fslspclksel = IFXUSB_HCFG_30_60_MHZ;
- if (_params->speed == IFXUSB_PARAM_SPEED_FULL)
- hcfg.b.fslssupp = 1;
- ifxusb_wreg(&_core_if->host_global_regs->hcfg, hcfg.d32);
- }
-
- _core_if->params.host_channels=(_core_if->hwcfg2.b.num_host_chan + 1);
-
- if(_params->host_channels>0 && _params->host_channels < _core_if->params.host_channels)
- _core_if->params.host_channels = _params->host_channels;
-
- /* Configure data FIFO sizes */
- _core_if->params.data_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
- _core_if->params.rx_fifo_size = ifxusb_rreg(&global_regs->grxfsiz);
- _core_if->params.nperio_tx_fifo_size= ifxusb_rreg(&global_regs->gnptxfsiz) >> 16;
- _core_if->params.perio_tx_fifo_size = ifxusb_rreg(&global_regs->hptxfsiz) >> 16;
- IFX_DEBUGPL(DBG_CIL, "Initial: FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
- IFX_DEBUGPL(DBG_CIL, " Rx FIFO Size=0x%06X\n", _core_if->params.rx_fifo_size);
- IFX_DEBUGPL(DBG_CIL, " NPTx FIFO Size=0x%06X\n", _core_if->params.nperio_tx_fifo_size);
- IFX_DEBUGPL(DBG_CIL, " PTx FIFO Size=0x%06X\n", _core_if->params.perio_tx_fifo_size);
-
- {
- fifosize_data_t txfifosize;
- if(_params->data_fifo_size >=0 && _params->data_fifo_size < _core_if->params.data_fifo_size)
- _core_if->params.data_fifo_size = _params->data_fifo_size;
-
- if( _params->rx_fifo_size >= 0 && _params->rx_fifo_size < _core_if->params.rx_fifo_size)
- _core_if->params.rx_fifo_size = _params->rx_fifo_size;
- if( _params->nperio_tx_fifo_size >=0 && _params->nperio_tx_fifo_size < _core_if->params.nperio_tx_fifo_size)
- _core_if->params.nperio_tx_fifo_size = _params->nperio_tx_fifo_size;
- if( _params->perio_tx_fifo_size >=0 && _params->perio_tx_fifo_size < _core_if->params.perio_tx_fifo_size)
- _core_if->params.perio_tx_fifo_size = _params->perio_tx_fifo_size;
-
- if(_core_if->params.data_fifo_size < _core_if->params.rx_fifo_size)
- _core_if->params.rx_fifo_size = _core_if->params.data_fifo_size;
- ifxusb_wreg( &global_regs->grxfsiz, _core_if->params.rx_fifo_size);
- txfifosize.b.startaddr = _core_if->params.rx_fifo_size;
-
- if(txfifosize.b.startaddr + _core_if->params.nperio_tx_fifo_size > _core_if->params.data_fifo_size)
- _core_if->params.nperio_tx_fifo_size = _core_if->params.data_fifo_size - txfifosize.b.startaddr;
- txfifosize.b.depth=_core_if->params.nperio_tx_fifo_size;
- ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
- txfifosize.b.startaddr += _core_if->params.nperio_tx_fifo_size;
-
- if(txfifosize.b.startaddr + _core_if->params.perio_tx_fifo_size > _core_if->params.data_fifo_size)
- _core_if->params.perio_tx_fifo_size = _core_if->params.data_fifo_size - txfifosize.b.startaddr;
- txfifosize.b.depth=_core_if->params.perio_tx_fifo_size;
- ifxusb_wreg( &global_regs->hptxfsiz, txfifosize.d32);
- txfifosize.b.startaddr += _core_if->params.perio_tx_fifo_size;
- }
-
- #ifdef __DEBUG__
- {
- fifosize_data_t fifosize;
- IFX_DEBUGPL(DBG_CIL, "Result : FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
-
- fifosize.d32=ifxusb_rreg(&global_regs->grxfsiz);
- IFX_DEBUGPL(DBG_CIL, " Rx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
- fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
- IFX_DEBUGPL(DBG_CIL, " NPTx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
- fifosize.d32=ifxusb_rreg(&global_regs->hptxfsiz);
- IFX_DEBUGPL(DBG_CIL, " PTx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
- }
- #endif
-
- /* Clear Host Set HNP Enable in the OTG Control Register */
- gotgctl.b.hstsethnpen = 1;
- ifxusb_mreg( &global_regs->gotgctl, gotgctl.d32, 0);
-
- /* Flush the FIFOs */
- ifxusb_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
- ifxusb_flush_rx_fifo(_core_if);
-
- for (i = 0; i < _core_if->hwcfg2.b.num_host_chan + 1; i++)
- {
- hcchar_data_t hcchar;
- hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
- hcchar.b.chen = 0;
- hcchar.b.chdis = 1;
- hcchar.b.epdir = 0;
- ifxusb_wreg(&_core_if->hc_regs[i]->hcchar, hcchar.d32);
- }
- /* Halt all channels to put them into a known state. */
- for (i = 0; i < _core_if->hwcfg2.b.num_host_chan + 1; i++)
- {
- hcchar_data_t hcchar;
- int count = 0;
-
- hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
- hcchar.b.chen = 1;
- hcchar.b.chdis = 1;
- hcchar.b.epdir = 0;
- ifxusb_wreg(&_core_if->hc_regs[i]->hcchar, hcchar.d32);
-
- IFX_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
- do{
- hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
- if (++count > 1000)
- {
- IFX_ERROR("%s: Unable to clear halt on channel %d\n", __func__, i);
- break;
- }
- } while (hcchar.b.chen);
- }
-}
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#if defined(__UEIP__)
- #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
- int ifxusb_vbus_status =-1;
- #endif
-
- #if defined(IFX_GPIO_USB_VBUS1) || defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
- int ifxusb_vbus1_status =-1;
- #endif
-
- #if defined(IFX_GPIO_USB_VBUS2) || defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
- int ifxusb_vbus2_status =-1;
- #endif
-
- #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
- static void *g_usb_vbus_trigger = NULL;
- #endif
- #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
- static void *g_usb_vbus1_trigger = NULL;
- #endif
- #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
- static void *g_usb_vbus2_trigger = NULL;
- #endif
-
- #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
- int ifxusb_vbus_gpio_inited=0;
- #endif
-
-#else //defined(__UEIP__)
- int ifxusb_vbus_gpio_inited=0;
-#endif
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-void ifxusb_vbus_init(ifxusb_core_if_t *_core_if)
-{
- #if defined(__UEIP__)
- #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
- if ( !g_usb_vbus_trigger )
- {
- ifx_led_trigger_register("USB_VBUS", &g_usb_vbus_trigger);
- if ( g_usb_vbus_trigger != NULL )
- {
- struct ifx_led_trigger_attrib attrib = {0};
- attrib.delay_on = 0;
- attrib.delay_off = 0;
- attrib.timeout = 0;
- attrib.def_value = 0;
- attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
- IFX_DEBUGP("Reg USB power!!\n");
- ifx_led_trigger_set_attrib(g_usb_vbus_trigger, &attrib);
- ifxusb_vbus_status =0;
- }
- }
- #endif
- #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
- if(_core_if->core_no==0 && !g_usb_vbus1_trigger )
- {
- ifx_led_trigger_register("USB_VBUS1", &g_usb_vbus1_trigger);
- if ( g_usb_vbus1_trigger != NULL )
- {
- struct ifx_led_trigger_attrib attrib = {0};
- attrib.delay_on = 0;
- attrib.delay_off = 0;
- attrib.timeout = 0;
- attrib.def_value = 0;
- attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
- IFX_DEBUGP("Reg USB1 power!!\n");
- ifx_led_trigger_set_attrib(g_usb_vbus1_trigger, &attrib);
- ifxusb_vbus1_status =0;
- }
- }
- #endif
- #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
- if(_core_if->core_no==1 && !g_usb_vbus2_trigger )
- {
- ifx_led_trigger_register("USB_VBUS2", &g_usb_vbus2_trigger);
- if ( g_usb_vbus2_trigger != NULL )
- {
- struct ifx_led_trigger_attrib attrib = {0};
- attrib.delay_on = 0;
- attrib.delay_off = 0;
- attrib.timeout = 0;
- attrib.def_value = 0;
- attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
- IFX_DEBUGP("Reg USB2 power!!\n");
- ifx_led_trigger_set_attrib(g_usb_vbus2_trigger, &attrib);
- ifxusb_vbus2_status =0;
- }
- }
- #endif
-
- #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
- /* == 20100712 AVM/WK use gpio_inited as bitmask == */
- if(ifxusb_vbus_gpio_inited == 0)
- {
- if(!ifx_gpio_register(IFX_GPIO_MODULE_USB))
- {
- IFX_DEBUGP("Register USB VBus through GPIO OK!!\n");
- #ifdef IFX_GPIO_USB_VBUS
- ifxusb_vbus_status =0;
- #endif //IFX_GPIO_USB_VBUS
- #ifdef IFX_GPIO_USB_VBUS1
- ifxusb_vbus1_status=0;
- #endif //IFX_GPIO_USB_VBUS1
- #ifdef IFX_GPIO_USB_VBUS2
- ifxusb_vbus2_status=0;
- #endif //IFX_GPIO_USB_VBUS2
- ifxusb_vbus_gpio_inited|= (1<<_core_if->core_no);
- }
- else
- IFX_PRINT("Register USB VBus Failed!!\n");
- } else {
- ifxusb_vbus_gpio_inited|= (1<<_core_if->core_no);
- }
- #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
- #endif //defined(__UEIP__)
-}
-
-void ifxusb_vbus_free(ifxusb_core_if_t *_core_if)
-{
- #if defined(__UEIP__)
- #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
- if ( g_usb_vbus_trigger )
- {
- ifx_led_trigger_deregister(g_usb_vbus_trigger);
- g_usb_vbus_trigger = NULL;
- ifxusb_vbus_status =-1;
- }
- #endif
- #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
- if(_core_if->core_no==0 && g_usb_vbus1_trigger )
- {
- ifx_led_trigger_deregister(g_usb_vbus1_trigger);
- g_usb_vbus1_trigger = NULL;
- ifxusb_vbus1_status =-1;
- }
- #endif
- #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
- if(_core_if->core_no==1 && g_usb_vbus2_trigger )
- {
- ifx_led_trigger_deregister(g_usb_vbus2_trigger);
- g_usb_vbus2_trigger = NULL;
- ifxusb_vbus2_status =-1;
- }
- #endif
-
- #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
- /* == 20100712 AVM/WK use gpio_inited as bitmask == */
- if((ifxusb_vbus_gpio_inited & (1<<_core_if->core_no)) == ifxusb_vbus_gpio_inited)
- {
- ifx_gpio_deregister(IFX_GPIO_MODULE_USB);
- #ifdef IFX_GPIO_USB_VBUS
- ifxusb_vbus_status =-1;
- #endif //IFX_GPIO_USB_VBUS
- #ifdef IFX_GPIO_USB_VBUS1
- ifxusb_vbus1_status=-1;
- #endif //IFX_GPIO_USB_VBUS1
- #ifdef IFX_GPIO_USB_VBUS2
- ifxusb_vbus2_status=-1;
- #endif //IFX_GPIO_USB_VBUS2
- }
- ifxusb_vbus_gpio_inited &= ~(1<<_core_if->core_no);
- #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
- #endif //defined(__UEIP__)
-}
-
-
-/*!
- \brief Turn on the USB 5V VBus Power
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_vbus_on(ifxusb_core_if_t *_core_if)
-{
- IFX_DEBUGP("SENDING VBus POWER UP\n");
- #if defined(__UEIP__)
- #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
- if ( g_usb_vbus_trigger && ifxusb_vbus_status==0)
- {
- ifx_led_trigger_activate(g_usb_vbus_trigger);
- IFX_DEBUGP("Enable USB power!!\n");
- ifxusb_vbus_status=1;
- }
- #endif
- #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
- if(_core_if->core_no==0 && g_usb_vbus1_trigger && ifxusb_vbus1_status==0)
- {
- ifx_led_trigger_activate(g_usb_vbus1_trigger);
- IFX_DEBUGP("Enable USB1 power!!\n");
- ifxusb_vbus1_status=1;
- }
- #endif
- #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
- if(_core_if->core_no==1 && g_usb_vbus2_trigger && ifxusb_vbus2_status==0)
- {
- ifx_led_trigger_activate(g_usb_vbus2_trigger);
- IFX_DEBUGP("Enable USB2 power!!\n");
- ifxusb_vbus2_status=1;
- }
- #endif
-
- #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
- if(ifxusb_vbus_gpio_inited)
- {
- #if defined(IFX_GPIO_USB_VBUS)
- if(ifxusb_vbus_status==0)
- {
- ifx_gpio_output_set(IFX_GPIO_USB_VBUS,IFX_GPIO_MODULE_USB);
- ifxusb_vbus_status=1;
- }
- #endif
- #if defined(IFX_GPIO_USB_VBUS1)
- if(_core_if->core_no==0 && ifxusb_vbus1_status==0)
- {
- ifx_gpio_output_set(IFX_GPIO_USB_VBUS1,IFX_GPIO_MODULE_USB);
- ifxusb_vbus1_status=1;
- }
- #endif
- #if defined(IFX_GPIO_USB_VBUS2)
- if(_core_if->core_no==1 && ifxusb_vbus2_status==0)
- {
- ifx_gpio_output_set(IFX_GPIO_USB_VBUS2,IFX_GPIO_MODULE_USB);
- ifxusb_vbus2_status=1;
- }
- #endif
- }
- #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
- #else
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- ifxusb_vbus_status=1;
- //usb_set_vbus_on();
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- set_bit (4, (volatile unsigned long *)AMAZON_SE_GPIO_P0_OUT);
- ifxusb_vbus_status=1;
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- {
- if (bsp_port_reserve_pin(1, 13, PORT_MODULE_USB) != 0)
- {
- IFX_PRINT("Can't enable USB1 5.5V power!!\n");
- return;
- }
- bsp_port_clear_altsel0(1, 13, PORT_MODULE_USB);
- bsp_port_clear_altsel1(1, 13, PORT_MODULE_USB);
- bsp_port_set_dir_out(1, 13, PORT_MODULE_USB);
- bsp_port_set_pudsel(1, 13, PORT_MODULE_USB);
- bsp_port_set_puden(1, 13, PORT_MODULE_USB);
- bsp_port_set_output(1, 13, PORT_MODULE_USB);
- IFX_DEBUGP("Enable USB1 power!!\n");
- ifxusb_vbus1_status=1;
- }
- else
- {
- if (bsp_port_reserve_pin(3, 4, PORT_MODULE_USB) != 0)
- {
- IFX_PRINT("Can't enable USB2 5.5V power!!\n");
- return;
- }
- bsp_port_clear_altsel0(3, 4, PORT_MODULE_USB);
- bsp_port_clear_altsel1(3, 4, PORT_MODULE_USB);
- bsp_port_set_dir_out(3, 4, PORT_MODULE_USB);
- bsp_port_set_pudsel(3, 4, PORT_MODULE_USB);
- bsp_port_set_puden(3, 4, PORT_MODULE_USB);
- bsp_port_set_output(3, 4, PORT_MODULE_USB);
- IFX_DEBUGP("Enable USB2 power!!\n");
- ifxusb_vbus2_status=1;
- }
- #endif //defined(__IS_AR9__)
- #if defined(__IS_VR9__)
- if(_core_if->core_no==0)
- {
- ifxusb_vbus1_status=1;
- }
- else
- {
- ifxusb_vbus2_status=1;
- }
- #endif //defined(__IS_VR9__)
- #endif //defined(__UEIP__)
-}
-
-
-/*!
- \brief Turn off the USB 5V VBus Power
- \param _core_if Pointer of core_if structure
- */
-void ifxusb_vbus_off(ifxusb_core_if_t *_core_if)
-{
- IFX_DEBUGP("SENDING VBus POWER OFF\n");
-
- #if defined(__UEIP__)
- #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
- if ( g_usb_vbus_trigger && ifxusb_vbus_status==1)
- {
- ifx_led_trigger_deactivate(g_usb_vbus_trigger);
- IFX_DEBUGP("Disable USB power!!\n");
- ifxusb_vbus_status=0;
- }
- #endif
- #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
- if(_core_if->core_no==0 && g_usb_vbus1_trigger && ifxusb_vbus1_status==1)
- {
- ifx_led_trigger_deactivate(g_usb_vbus1_trigger);
- IFX_DEBUGP("Disable USB1 power!!\n");
- ifxusb_vbus1_status=0;
- }
- #endif
- #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
- if(_core_if->core_no==1 && g_usb_vbus2_trigger && ifxusb_vbus2_status==1)
- {
- ifx_led_trigger_deactivate(g_usb_vbus2_trigger);
- IFX_DEBUGP("Disable USB2 power!!\n");
- ifxusb_vbus2_status=0;
- }
- #endif
-
- #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
- if(ifxusb_vbus_gpio_inited)
- {
- #if defined(IFX_GPIO_USB_VBUS)
- if(ifxusb_vbus_status==1)
- {
- ifx_gpio_output_clear(IFX_GPIO_USB_VBUS,IFX_GPIO_MODULE_USB);
- ifxusb_vbus_status=0;
- }
- #endif
- #if defined(IFX_GPIO_USB_VBUS1)
- if(_core_if->core_no==0 && ifxusb_vbus1_status==1)
- {
- ifx_gpio_output_clear(IFX_GPIO_USB_VBUS1,IFX_GPIO_MODULE_USB);
- ifxusb_vbus1_status=0;
- }
- #endif
- #if defined(IFX_GPIO_USB_VBUS2)
- if(_core_if->core_no==1 && ifxusb_vbus2_status==1)
- {
- ifx_gpio_output_clear(IFX_GPIO_USB_VBUS2,IFX_GPIO_MODULE_USB);
- ifxusb_vbus2_status=0;
- }
- #endif
- }
- #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
- #else
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- ifxusb_vbus_status=0;
- //usb_set_vbus_on();
- #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
- #if defined(__IS_AMAZON_SE__)
- clear_bit (4, (volatile unsigned long *)AMAZON_SE_GPIO_P0_OUT);
- ifxusb_vbus_status=0;
- #endif //defined(__IS_AMAZON_SE__)
- #if defined(__IS_AR9__)
- if(_core_if->core_no==0)
- {
- if (bsp_port_reserve_pin(1, 13, PORT_MODULE_USB) != 0) {
- IFX_PRINT("Can't Disable USB1 5.5V power!!\n");
- return;
- }
- bsp_port_clear_altsel0(1, 13, PORT_MODULE_USB);
- bsp_port_clear_altsel1(1, 13, PORT_MODULE_USB);
- bsp_port_set_dir_out(1, 13, PORT_MODULE_USB);
- bsp_port_set_pudsel(1, 13, PORT_MODULE_USB);
- bsp_port_set_puden(1, 13, PORT_MODULE_USB);
- bsp_port_clear_output(1, 13, PORT_MODULE_USB);
- IFX_DEBUGP("Disable USB1 power!!\n");
- ifxusb_vbus1_status=0;
- }
- else
- {
- if (bsp_port_reserve_pin(3, 4, PORT_MODULE_USB) != 0) {
- IFX_PRINT("Can't Disable USB2 5.5V power!!\n");
- return;
- }
- bsp_port_clear_altsel0(3, 4, PORT_MODULE_USB);
- bsp_port_clear_altsel1(3, 4, PORT_MODULE_USB);
- bsp_port_set_dir_out(3, 4, PORT_MODULE_USB);
- bsp_port_set_pudsel(3, 4, PORT_MODULE_USB);
- bsp_port_set_puden(3, 4, PORT_MODULE_USB);
- bsp_port_clear_output(3, 4, PORT_MODULE_USB);
- IFX_DEBUGP("Disable USB2 power!!\n");
-
- ifxusb_vbus2_status=0;
- }
- #endif //defined(__IS_AR9__)
- #if defined(__IS_VR9__)
- if(_core_if->core_no==0)
- {
- ifxusb_vbus1_status=0;
- }
- else
- {
- ifxusb_vbus2_status=0;
- }
- #endif //defined(__IS_VR9__)
- #endif //defined(__UEIP__)
-}
-
-
-
-/*!
- \brief Read Current VBus status
- \param _core_if Pointer of core_if structure
- */
-int ifxusb_vbus(ifxusb_core_if_t *_core_if)
-{
-#if defined(__UEIP__)
- #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
- return (ifxusb_vbus_status);
- #endif
-
- #if defined(IFX_GPIO_USB_VBUS1) || defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
- if(_core_if->core_no==0)
- return (ifxusb_vbus1_status);
- #endif
-
- #if defined(IFX_GPIO_USB_VBUS2) || defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
- if(_core_if->core_no==1)
- return (ifxusb_vbus2_status);
- #endif
-#else //defined(__UEIP__)
-#endif
- return -1;
-}
-
-#if defined(__UEIP__)
-#else
- #if defined(__IS_TWINPASS__)
- #define ADSL_BASE 0x20000
- #define CRI_BASE 0x31F00
- #define CRI_CCR0 CRI_BASE + 0x00
- #define CRI_CCR1 CRI_BASE + 0x01*4
- #define CRI_CDC0 CRI_BASE + 0x02*4
- #define CRI_CDC1 CRI_BASE + 0x03*4
- #define CRI_RST CRI_BASE + 0x04*4
- #define CRI_MASK0 CRI_BASE + 0x05*4
- #define CRI_MASK1 CRI_BASE + 0x06*4
- #define CRI_MASK2 CRI_BASE + 0x07*4
- #define CRI_STATUS0 CRI_BASE + 0x08*4
- #define CRI_STATUS1 CRI_BASE + 0x09*4
- #define CRI_STATUS2 CRI_BASE + 0x0A*4
- #define CRI_AMASK0 CRI_BASE + 0x0B*4
- #define CRI_AMASK1 CRI_BASE + 0x0C*4
- #define CRI_UPDCTL CRI_BASE + 0x0D*4
- #define CRI_MADST CRI_BASE + 0x0E*4
- // 0x0f is missing
- #define CRI_EVENT0 CRI_BASE + 0x10*4
- #define CRI_EVENT1 CRI_BASE + 0x11*4
- #define CRI_EVENT2 CRI_BASE + 0x12*4
-
- #define IRI_I_ENABLE 0x32000
- #define STY_SMODE 0x3c004
- #define AFE_TCR_0 0x3c0dc
- #define AFE_ADDR_ADDR 0x3c0e8
- #define AFE_RDATA_ADDR 0x3c0ec
- #define AFE_WDATA_ADDR 0x3c0f0
- #define AFE_CONFIG 0x3c0f4
- #define AFE_SERIAL_CFG 0x3c0fc
-
- #define DFE_BASE_ADDR 0xBE116000
- //#define DFE_BASE_ADDR 0x9E116000
-
- #define MEI_FR_ARCINT_C (DFE_BASE_ADDR + 0x0000001C)
- #define MEI_DBG_WADDR_C (DFE_BASE_ADDR + 0x00000024)
- #define MEI_DBG_RADDR_C (DFE_BASE_ADDR + 0x00000028)
- #define MEI_DBG_DATA_C (DFE_BASE_ADDR + 0x0000002C)
- #define MEI_DBG_DECO_C (DFE_BASE_ADDR + 0x00000030)
- #define MEI_DBG_MASTER_C (DFE_BASE_ADDR + 0x0000003C)
-
- static void WriteARCmem(uint32_t addr, uint32_t data)
- {
- writel(1 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
- writel(1 ,(volatile uint32_t *)MEI_DBG_DECO_C );
- writel(addr ,(volatile uint32_t *)MEI_DBG_WADDR_C );
- writel(data ,(volatile uint32_t *)MEI_DBG_DATA_C );
- while( (ifxusb_rreg((volatile uint32_t *)MEI_FR_ARCINT_C) & 0x20) != 0x20 ){};
- writel(0 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
- IFX_DEBUGP("WriteARCmem %08x %08x\n",addr,data);
- };
-
- static uint32_t ReadARCmem(uint32_t addr)
- {
- u32 data;
- writel(1 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
- writel(1 ,(volatile uint32_t *)MEI_DBG_DECO_C );
- writel(addr ,(volatile uint32_t *)MEI_DBG_RADDR_C );
- while( (ifxusb_rreg((volatile uint32_t *)MEI_FR_ARCINT_C) & 0x20) != 0x20 ){};
- data = ifxusb_rreg((volatile uint32_t *)MEI_DBG_DATA_C );
- writel(0 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
- IFX_DEBUGP("ReadARCmem %08x %08x\n",addr,data);
- return data;
- };
-
- void ifxusb_enable_afe_oc(void)
- {
- /* Start the clock */
- WriteARCmem(CRI_UPDCTL ,0x00000008);
- WriteARCmem(CRI_CCR0 ,0x00000014);
- WriteARCmem(CRI_CCR1 ,0x00000500);
- WriteARCmem(AFE_CONFIG ,0x000001c8);
- WriteARCmem(AFE_SERIAL_CFG,0x00000016); // (DANUBE_PCI_CFG_BASE+(1<<addrline))AFE serial interface clock & data latch edge
- WriteARCmem(AFE_TCR_0 ,0x00000002);
- //Take afe out of reset
- WriteARCmem(AFE_CONFIG ,0x000000c0);
- WriteARCmem(IRI_I_ENABLE ,0x00000101);
- WriteARCmem(STY_SMODE ,0x00001980);
-
- ReadARCmem(CRI_UPDCTL );
- ReadARCmem(CRI_CCR0 );
- ReadARCmem(CRI_CCR1 );
- ReadARCmem(AFE_CONFIG );
- ReadARCmem(AFE_SERIAL_CFG); // (DANUBE_PCI_CFG_BASE+(1<<addrline))AFE serial interface clock & data latch edge
- ReadARCmem(AFE_TCR_0 );
- ReadARCmem(AFE_CONFIG );
- ReadARCmem(IRI_I_ENABLE );
- ReadARCmem(STY_SMODE );
- }
- #endif //defined(__IS_TWINPASS__)
-#endif //defined(__UEIP__)
-
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_ctl.c b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_ctl.c
deleted file mode 100644
index ade8e13cb2..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_ctl.c
+++ /dev/null
@@ -1,1385 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxusb_ctl.c
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : Implementing the procfs and sysfs for IFX USB driver
- *****************************************************************************/
-
-/*! \file ifxusb_ctl.c
- \ingroup IFXUSB_DRIVER_V3
- \brief Implementing the procfs and sysfs for IFX USB driver
-*/
-
-#include <linux/version.h>
-#include "ifxusb_version.h"
-
-
-#include <linux/proc_fs.h>
-#include <asm/byteorder.h>
-#include <asm/unaligned.h>
-#include <asm/uaccess.h>
-
-#include "ifxusb_plat.h"
-#include "ifxusb_regs.h"
-#include "ifxusb_cif.h"
-
-#ifdef __IS_DEVICE__
- #include "ifxpcd.h"
-#endif
-
-#ifdef __IS_HOST__
- #include "ifxhcd.h"
-#endif
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gfp.h>
-
-
-#ifdef __IS_HOST__
- extern char ifxusb_driver_name[];
-
- #ifdef __IS_DUAL__
- extern ifxhcd_hcd_t ifxusb_hcd_1;
- extern ifxhcd_hcd_t ifxusb_hcd_2;
- extern char ifxusb_hcd_name_1[];
- extern char ifxusb_hcd_name_2[];
- #else
- extern ifxhcd_hcd_t ifxusb_hcd;
- extern char ifxusb_hcd_name[];
- #endif
-
-#endif
-
-#ifdef __IS_DEVICE__
- extern char ifxusb_driver_name[];
-
- extern ifxpcd_pcd_t ifxusb_pcd;
- extern char ifxusb_pcd_name[];
-#endif
-
-
-//Attributes for sysfs (for 2.6 only)
-
-extern struct device_attribute dev_attr_dbglevel;
-
-#ifdef __IS_DUAL__
- extern struct device_attribute dev_attr_dump_params_1;
- extern struct device_attribute dev_attr_dump_params_2;
-#else
- extern struct device_attribute dev_attr_dump_params;
-#endif
-
-#ifdef __IS_DUAL__
- extern struct device_attribute dev_attr_mode_1;
- extern struct device_attribute dev_attr_mode_2;
-#else
- extern struct device_attribute dev_attr_mode;
-#endif
-
-#ifdef __IS_HOST__
- #ifdef __IS_DUAL__
- extern struct device_attribute dev_attr_buspower_1;
- extern struct device_attribute dev_attr_buspower_2;
- extern struct device_attribute dev_attr_bussuspend_1;
- extern struct device_attribute dev_attr_bussuspend_2;
- extern struct device_attribute dev_attr_busconnected_1;
- extern struct device_attribute dev_attr_busconnected_2;
- extern struct device_attribute dev_attr_connectspeed_1;
- extern struct device_attribute dev_attr_connectspeed_1;
- #else
- extern struct device_attribute dev_attr_buspower;
- extern struct device_attribute dev_attr_bussuspend;
- extern struct device_attribute dev_attr_busconnected;
- extern struct device_attribute dev_attr_connectspeed;
- #endif
-#endif //__IS_HOST__
-
-#ifdef __IS_DEVICE__
- extern struct device_attribute dev_attr_devspeed;
- extern struct device_attribute dev_attr_enumspeed;
-#endif //__IS_DEVICE__
-
-#ifdef __ENABLE_DUMP__
- #ifdef __IS_DUAL__
- extern struct device_attribute dev_attr_dump_reg_1;
- extern struct device_attribute dev_attr_dump_reg_2;
- extern struct device_attribute dev_attr_dump_spram_1;
- extern struct device_attribute dev_attr_dump_spram_2;
- #ifdef __IS_HOST__
- extern struct device_attribute dev_attr_dump_host_state_1;
- extern struct device_attribute dev_attr_dump_host_state_2;
- #else
- #endif
- #else
- extern struct device_attribute dev_attr_dump_reg;
- extern struct device_attribute dev_attr_dump_spram;
- #ifdef __IS_HOST__
- extern struct device_attribute dev_attr_dump_host_state;
- #else
- #endif
- #endif
-#endif //__ENABLE_DUMP__
-
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
-static ssize_t procfs_dbglevel_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-{
- #ifdef __IS_HOST__
- return sprintf( buf, "%08X\n",h_dbg_lvl );
- #else
- return sprintf( buf, "%08X\n",d_dbg_lvl );
- #endif
-}
-
-static ssize_t procfs_dbglevel_store(struct file *file, const char *buffer, unsigned long count, void *data)
-{
- char buf[10];
- int i = 0;
- uint32_t value;
- if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
- return -EFAULT;
- value = simple_strtoul(buf, NULL, 16);
- #ifdef __IS_HOST__
- h_dbg_lvl =value;
- #else
- d_dbg_lvl =value;
- #endif
- //turn on and off power
- return count;
-}
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dbglevel_show( struct device *_dev, struct device_attribute *attr,char *buf)
-#else
- static ssize_t sysfs_dbglevel_show( struct device *_dev, char *buf)
-#endif
-{
- #ifdef __IS_HOST__
- return sprintf( buf, "%08X\n",h_dbg_lvl );
- #else
- return sprintf( buf, "%08X\n",d_dbg_lvl );
- #endif
-}
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dbglevel_store( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
-#else
- static ssize_t sysfs_dbglevel_store( struct device *_dev, const char *buffer, size_t count )
-#endif
-{
- char buf[10];
- int i = 0;
- uint32_t value;
- if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
- return -EFAULT;
- value = simple_strtoul(buf, NULL, 16);
- #ifdef __IS_HOST__
- h_dbg_lvl =value;
- #else
- d_dbg_lvl =value;
- #endif
- //turn on and off power
- return count;
-}
-
-DEVICE_ATTR(dbglevel, S_IRUGO|S_IWUSR, sysfs_dbglevel_show, sysfs_dbglevel_store);
-
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
-static void ifxusb_dump_params(ifxusb_core_if_t *_core_if);
-
-#ifdef __IS_DUAL__
- static void dump_params_1(void)
- {
- ifxusb_dump_params(&ifxusb_hcd_1.core_if);
- }
- static void dump_params_2(void)
- {
- ifxusb_dump_params(&ifxusb_hcd_2.core_if);
- }
-
- static ssize_t procfs_dump_params_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- dump_params_1();
- return 0;
- }
- static ssize_t procfs_dump_params_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- dump_params_2();
- return 0;
- }
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_params_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_params_show_1( struct device *_dev,char *buf)
- #endif
- {
- dump_params_1();
- return 0;
- }
- DEVICE_ATTR(dump_params_1, S_IRUGO|S_IWUSR, sysfs_dump_params_show_1, NULL);
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_params_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_params_show_2( struct device *_dev,char *buf)
- #endif
- {
- dump_params_2();
- return 0;
- }
-
- DEVICE_ATTR(dump_params_2, S_IRUGO|S_IWUSR, sysfs_dump_params_show_2, NULL);
-#else
- static void dump_params(void)
- {
- #ifdef __IS_HOST__
- ifxusb_dump_params(&ifxusb_hcd.core_if);
- #else
- ifxusb_dump_params(&ifxusb_pcd.core_if);
- #endif
- }
-
- static ssize_t procfs_dump_params_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- dump_params();
- return 0;
- }
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_params_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_params_show( struct device *_dev,char *buf)
- #endif
- {
- dump_params();
- return 0;
- }
- DEVICE_ATTR(dump_params, S_IRUGO|S_IWUSR, sysfs_dump_params_show, NULL);
-#endif
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#ifdef __IS_DUAL__
- static ssize_t mode_show_1(char *buf)
- {
- if((ifxusb_rreg(&ifxusb_hcd_1.core_if.core_global_regs->gintsts ) & 0x1) == 1)
- return sprintf( buf, "HOST\n" );
- else
- return sprintf( buf, "DEVICE(INCORRECT!)\n" );
- }
-
- static ssize_t mode_show_2(char *buf)
- {
- if((ifxusb_rreg(&ifxusb_hcd_2.core_if.core_global_regs->gintsts ) & 0x1) == 1)
- return sprintf( buf, "HOST\n" );
- else
- return sprintf( buf, "DEVICE(INCORRECT!)\n" );
- }
-
- static ssize_t procfs_mode_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return mode_show_1(buf);
- }
- static ssize_t procfs_mode_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return mode_show_2(buf);
- }
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_mode_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_mode_show_1( struct device *_dev,char *buf)
- #endif
- {
- return mode_show_1(buf);
- }
-
- DEVICE_ATTR(mode_1, S_IRUGO|S_IWUSR, sysfs_mode_show_1, 0);
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_mode_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_mode_show_2( struct device *_dev,char *buf)
- #endif
- {
- return mode_show_2(buf);
- }
- DEVICE_ATTR(mode_2, S_IRUGO|S_IWUSR, sysfs_mode_show_2, NULL);
-#else
- static ssize_t mode_show(char *buf)
- {
- #ifdef __IS_HOST__
- if((ifxusb_rreg(&ifxusb_hcd.core_if.core_global_regs->gintsts ) & 0x1) == 1)
- return sprintf( buf, "HOST\n" );
- else
- return sprintf( buf, "DEVICE(INCORRECT!)\n" );
- #else
- if((ifxusb_rreg(&ifxusb_pcd.core_if.core_global_regs->gintsts ) & 0x1) != 1)
- return sprintf( buf, "DEVICE\n" );
- else
- return sprintf( buf, "HOST(INCORRECT!)\n" );
- #endif
- }
- static ssize_t procfs_mode_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return mode_show(buf);
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_mode_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_mode_show( struct device *_dev, char *buf)
- #endif
- {
- return mode_show(buf);
- }
- DEVICE_ATTR(mode, S_IRUGO|S_IWUSR, sysfs_mode_show, NULL);
-#endif
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#ifdef __IS_HOST__
- #ifdef __IS_DUAL__
- static ssize_t buspower_show_1(char *buf)
- {
- if(ifxusb_vbus (&ifxusb_hcd_1.core_if)==1) return sprintf( buf, "1\n" );
- if(ifxusb_vbus (&ifxusb_hcd_1.core_if)==0) return sprintf( buf, "0\n" );
- return sprintf( buf, "UNKNOWN\n" );
- }
- static void buspower_store_1(uint32_t value)
- {
- if (value==1) ifxusb_vbus_on (&ifxusb_hcd_1.core_if);
- else if(value==0) ifxusb_vbus_off(&ifxusb_hcd_1.core_if);
- }
- static ssize_t buspower_show_2(char *buf)
- {
- if(ifxusb_vbus (&ifxusb_hcd_2.core_if)==1) return sprintf( buf, "1\n" );
- if(ifxusb_vbus (&ifxusb_hcd_2.core_if)==0) return sprintf( buf, "0\n" );
- return sprintf( buf, "UNKNOWN\n" );
- }
- static void buspower_store_2(uint32_t value)
- {
- if (value==1) ifxusb_vbus_on (&ifxusb_hcd_2.core_if);
- else if(value==0) ifxusb_vbus_off(&ifxusb_hcd_2.core_if);
- }
- static ssize_t procfs_buspower_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return buspower_show_1(buf);
- }
- static ssize_t procfs_buspower_store_1(struct file *file, const char *buffer, unsigned long count, void *data)
- {
- char buf[10];
- int i = 0;
- uint32_t value;
- if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
- return -EFAULT;
- value = simple_strtoul(buf, NULL, 16);
- buspower_store_1(value);
- return count;
- }
- static ssize_t procfs_buspower_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return buspower_show_2(buf);
- }
- static ssize_t procfs_buspower_store_2(struct file *file, const char *buffer, unsigned long count, void *data)
- {
- char buf[10];
- int i = 0;
- uint32_t value;
- if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
- return -EFAULT;
- value = simple_strtoul(buf, NULL, 16);
- buspower_store_2(value);
- return count;
- }
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_buspower_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_buspower_show_1( struct device *_dev,char *buf)
- #endif
- {
- return buspower_show_1(buf);
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_buspower_store_1( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
- #else
- static ssize_t sysfs_buspower_store_1( struct device *_dev, const char *buffer, size_t count )
- #endif
- {
- char buf[10];
- int i = 0;
- uint32_t value;
- if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
- return -EFAULT;
- value = simple_strtoul(buf, NULL, 16);
- buspower_store_1(value);
- return count;
- }
- DEVICE_ATTR(buspower_1, S_IRUGO|S_IWUSR, sysfs_buspower_show_1, sysfs_buspower_store_1);
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_buspower_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_buspower_show_2( struct device *_dev,char *buf)
- #endif
- {
- return buspower_show_2(buf);
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_buspower_store_2( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
- #else
- static ssize_t sysfs_buspower_store_2( struct device *_dev, const char *buffer, size_t count )
- #endif
- {
- char buf[10];
- int i = 0;
- uint32_t value;
- if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
- return -EFAULT;
- value = simple_strtoul(buf, NULL, 16);
- buspower_store_2(value);
- return count;
- }
- DEVICE_ATTR(buspower_2, S_IRUGO|S_IWUSR, sysfs_buspower_show_2, sysfs_buspower_store_2);
- #else
- static ssize_t buspower_show(char *buf)
- {
- if(ifxusb_vbus (&ifxusb_hcd.core_if)==1) return sprintf( buf, "1\n" );
- if(ifxusb_vbus (&ifxusb_hcd.core_if)==0) return sprintf( buf, "0\n" );
- return sprintf( buf, "UNKNOWN\n" );
- }
- static void buspower_store(uint32_t value)
- {
- if (value==1) ifxusb_vbus_on (&ifxusb_hcd.core_if);
- else if(value==0) ifxusb_vbus_off(&ifxusb_hcd.core_if);
- }
- static ssize_t procfs_buspower_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return buspower_show(buf);
- }
- static ssize_t procfs_buspower_store(struct file *file, const char *buffer, unsigned long count, void *data)
- {
- char buf[10];
- int i = 0;
- uint32_t value;
- if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
- return -EFAULT;
- value = simple_strtoul(buf, NULL, 16);
- buspower_store(value);
- return count;
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_buspower_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_buspower_show( struct device *_dev, char *buf)
- #endif
- {
- return buspower_show(buf);
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_buspower_store( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
- #else
- static ssize_t sysfs_buspower_store( struct device *_dev, const char *buffer, size_t count )
- #endif
- {
- char buf[10];
- int i = 0;
- uint32_t value;
- if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
- return -EFAULT;
- value = simple_strtoul(buf, NULL, 16);
- buspower_store(value);
- return count;
- }
- DEVICE_ATTR(buspower, S_IRUGO|S_IWUSR, sysfs_buspower_show, sysfs_buspower_store);
- #endif
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
-
- #ifdef __IS_DUAL__
- static ssize_t bussuspend_show_1(char *buf)
- {
- hprt0_data_t val;
- val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
- return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
- }
- static ssize_t bussuspend_show_2(char *buf)
- {
- hprt0_data_t val;
- val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
- return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
- }
-
- static ssize_t procfs_bussuspend_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return bussuspend_show_1(buf);
- }
- static ssize_t procfs_bussuspend_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return bussuspend_show_2(buf);
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_bussuspend_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_bussuspend_show_1( struct device *_dev,char *buf)
- #endif
- {
- return bussuspend_show_1(buf);
- }
- DEVICE_ATTR(bussuspend_1, S_IRUGO|S_IWUSR, sysfs_bussuspend_show_1, 0);
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_bussuspend_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_bussuspend_show_2( struct device *_dev,char *buf)
- #endif
- {
- return bussuspend_show_2(buf);
- }
- DEVICE_ATTR(bussuspend_2, S_IRUGO|S_IWUSR, sysfs_bussuspend_show_2, 0);
- #else
- static ssize_t bussuspend_show(char *buf)
- {
- hprt0_data_t val;
- val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
- return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
- }
- static ssize_t procfs_bussuspend_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return bussuspend_show(buf);
- }
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_bussuspend_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_bussuspend_show( struct device *_dev, char *buf)
- #endif
- {
- return bussuspend_show(buf);
- }
- DEVICE_ATTR(bussuspend, S_IRUGO|S_IWUSR, sysfs_bussuspend_show, 0);
- #endif
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
- #ifdef __IS_DUAL__
- static ssize_t busconnected_show_1(char *buf)
- {
- hprt0_data_t val;
- val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
- return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
- }
- static ssize_t busconnected_show_2(char *buf)
- {
- hprt0_data_t val;
- val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
- return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
- }
-
- static ssize_t procfs_busconnected_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return busconnected_show_1(buf);
- }
- static ssize_t procfs_busconnected_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return busconnected_show_2(buf);
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_busconnected_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_busconnected_show_1( struct device *_dev,char *buf)
- #endif
- {
- return busconnected_show_1(buf);
- }
- DEVICE_ATTR(busconnected_1, S_IRUGO|S_IWUSR, sysfs_busconnected_show_1, 0);
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_busconnected_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_busconnected_show_2( struct device *_dev,char *buf)
- #endif
- {
- return busconnected_show_2(buf);
- }
- DEVICE_ATTR(busconnected_2, S_IRUGO|S_IWUSR, sysfs_busconnected_show_2, 0);
- #else
- static ssize_t busconnected_show(char *buf)
- {
- hprt0_data_t val;
- val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
- return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
- }
- static ssize_t procfs_busconnected_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return busconnected_show(buf);
- }
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_busconnected_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_busconnected_show( struct device *_dev, char *buf)
- #endif
- {
- return busconnected_show(buf);
- }
- DEVICE_ATTR(busconnected, S_IRUGO|S_IWUSR, sysfs_busconnected_show, 0);
- #endif
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
- #ifdef __IS_DUAL__
- static ssize_t connectspeed_show_1(char *buf)
- {
- hprt0_data_t val;
- val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
- if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
- if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
- if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd);
- return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
- }
- static ssize_t connectspeed_show_2(char *buf)
- {
- hprt0_data_t val;
- val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
- if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
- if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
- if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd);
- return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
- }
-
- static ssize_t procfs_connectspeed_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return connectspeed_show_1(buf);
- }
- static ssize_t procfs_connectspeed_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return connectspeed_show_2(buf);
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_connectspeed_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_connectspeed_show_1( struct device *_dev,char *buf)
- #endif
- {
- return connectspeed_show_1(buf);
- }
- DEVICE_ATTR(connectspeed_1, S_IRUGO|S_IWUSR, sysfs_connectspeed_show_1, 0);
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_connectspeed_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_connectspeed_show_2( struct device *_dev,char *buf)
- #endif
- {
- return connectspeed_show_2(buf);
- }
- DEVICE_ATTR(connectspeed_2, S_IRUGO|S_IWUSR, sysfs_connectspeed_show_2, 0);
- #else
- static ssize_t connectspeed_show(char *buf)
- {
- hprt0_data_t val;
- val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
- if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
- if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
- if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd);
- return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
- }
-
- static ssize_t procfs_connectspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return connectspeed_show(buf);
- }
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_connectspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_connectspeed_show( struct device *_dev, char *buf)
- #endif
- {
- return connectspeed_show(buf);
- }
- DEVICE_ATTR(connectspeed, S_IRUGO|S_IWUSR, sysfs_connectspeed_show, 0);
- #endif
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-#endif
-
-
-#ifdef __IS_DEVICE__
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
- static ssize_t devspeed_show(char *buf)
- {
- dcfg_data_t val;
- val.d32 = ifxusb_rreg(&ifxusb_pcd.core_if.dev_global_regs->dcfg);
- if( val.b.devspd ==0) return sprintf (buf, "Dev Speed = High (%d)\n", val.b.devspd);
- if( val.b.devspd ==1) return sprintf (buf, "Dev Speed = Full (%d)\n", val.b.devspd);
- if( val.b.devspd ==3) return sprintf (buf, "Dev Speed = Full (%d)\n", val.b.devspd);
- return sprintf (buf, "Dev Speed = Unknown (%d)\n", val.b.devspd);
- }
-
- static ssize_t procfs_devspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return devspeed_show(buf);
- }
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_devspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_devspeed_show( struct device *_dev, char *buf)
- #endif
- {
- return devspeed_show(buf);
- }
- DEVICE_ATTR(devspeed, S_IRUGO|S_IWUSR, sysfs_devspeed_show, 0);
-
- static ssize_t enumspeed_show(char *buf)
- {
- dsts_data_t val;
- val.d32 = ifxusb_rreg(&ifxusb_pcd.core_if.dev_global_regs->dsts);
- if( val.b.enumspd ==0) return sprintf (buf, "Enum Speed = High (%d)\n", val.b.enumspd);
- if( val.b.enumspd ==1) return sprintf (buf, "Enum Speed = Full (%d)\n", val.b.enumspd);
- if( val.b.enumspd ==2) return sprintf (buf, "Enum Speed = Low (%d)\n", val.b.enumspd);
- return sprintf (buf, "Enum Speed = invalid(%d)\n", val.b.enumspd);
- }
-
- static ssize_t procfs_enumspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- return enumspeed_show(buf);
- }
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_enumspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_enumspeed_show( struct device *_dev, char *buf)
- #endif
- {
- return enumspeed_show(buf);
- }
- DEVICE_ATTR(enumspeed, S_IRUGO|S_IWUSR, sysfs_enumspeed_show, 0);
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-#endif
-
-
-//////////////////////////////////////////////////////////////////////////////////
-#ifdef __ENABLE_DUMP__
-
- #ifdef __IS_DUAL__
- static void dump_reg_1(void)
- {
- ifxusb_dump_registers(&ifxusb_hcd_1.core_if);
- }
- static void dump_reg_2(void)
- {
- ifxusb_dump_registers(&ifxusb_hcd_2.core_if);
- }
-
- static ssize_t procfs_dump_reg_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- dump_reg_1();
- return 0;
- }
- static ssize_t procfs_dump_reg_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- dump_reg_2();
- return 0;
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_reg_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_reg_show_1( struct device *_dev,char *buf)
- #endif
- {
- dump_reg_1();
- return 0;
- }
- DEVICE_ATTR(dump_reg_1, S_IRUGO|S_IWUSR, sysfs_dump_reg_show_1, 0);
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_reg_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_reg_show_2( struct device *_dev,char *buf)
- #endif
- {
- dump_reg_2();
- return 0;
- }
- DEVICE_ATTR(dump_reg_2, S_IRUGO|S_IWUSR, sysfs_dump_reg_show_2, 0);
- #else
- static void dump_reg(void)
- {
- #ifdef __IS_HOST__
- ifxusb_dump_registers(&ifxusb_hcd.core_if);
- #endif
- #ifdef __IS_DEVICE__
- ifxusb_dump_registers(&ifxusb_pcd.core_if);
- #endif
- }
- static ssize_t procfs_dump_reg_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- dump_reg();
- return 0;
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_reg_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_reg_show( struct device *_dev,char *buf)
- #endif
- {
- dump_reg();
- return 0;
- }
- DEVICE_ATTR(dump_reg, S_IRUGO|S_IWUSR, sysfs_dump_reg_show, 0);
- #endif
-
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
- #ifdef __IS_DUAL__
- static void dump_spram_1(void)
- {
- ifxusb_dump_spram(&ifxusb_hcd_1.core_if);
- }
- static void dump_spram_2(void)
- {
- ifxusb_dump_spram(&ifxusb_hcd_2.core_if);
- }
-
- static ssize_t procfs_dump_spram_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- dump_spram_1();
- return 0;
- }
- static ssize_t procfs_dump_spram_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- dump_spram_2();
- return 0;
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_spram_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_spram_show_1( struct device *_dev,char *buf)
- #endif
- {
- dump_spram_1();
- return 0;
- }
- DEVICE_ATTR(dump_spram_1, S_IRUGO|S_IWUSR, sysfs_dump_spram_show_1, 0);
-
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_spram_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_spram_show_2( struct device *_dev,char *buf)
- #endif
- {
- dump_spram_2();
- return 0;
- }
- DEVICE_ATTR(dump_spram_2, S_IRUGO|S_IWUSR, sysfs_dump_spram_show_2, 0);
- #else
- static void dump_spram(void)
- {
- #ifdef __IS_HOST__
- ifxusb_dump_spram(&ifxusb_hcd.core_if);
- #endif
- #ifdef __IS_DEVICE__
- ifxusb_dump_spram(&ifxusb_pcd.core_if);
- #endif
- }
- static ssize_t procfs_dump_spram_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- dump_spram();
- return 0;
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_spram_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_spram_show( struct device *_dev,char *buf)
- #endif
- {
- dump_spram();
- return 0;
- }
- DEVICE_ATTR(dump_spram, S_IRUGO|S_IWUSR, sysfs_dump_spram_show, 0);
- #endif
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
- #ifdef __IS_HOST__
- #ifdef __IS_DUAL__
- static ssize_t procfs_dump_host_state_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- ifxhcd_dump_state(&ifxusb_hcd_1);
- return 0;
- }
- static ssize_t procfs_dump_host_state_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- ifxhcd_dump_state(&ifxusb_hcd_2);
- return 0;
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_host_state_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_host_state_show_1( struct device *_dev,char *buf)
- #endif
- {
- ifxhcd_dump_state(&ifxusb_hcd_1);
- return 0;
- }
- DEVICE_ATTR(dump_host_state_1, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show_1, 0);
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_host_state_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_host_state_show_2( struct device *_dev,char *buf)
- #endif
- {
- ifxhcd_dump_state(&ifxusb_hcd_2);
- return 0;
- }
- DEVICE_ATTR(dump_host_state_2, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show_2, 0);
- #else
- static ssize_t procfs_dump_host_state_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
- {
- ifxhcd_dump_state(&ifxusb_hcd);
- return 0;
- }
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- static ssize_t sysfs_dump_host_state_show( struct device *_dev, struct device_attribute *attr,char *buf)
- #else
- static ssize_t sysfs_dump_host_state_show( struct device *_dev,char *buf)
- #endif
- {
- ifxhcd_dump_state(&ifxusb_hcd);
- return 0;
- }
- DEVICE_ATTR(dump_host_state, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show, 0);
- #endif
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
- #endif //IS_HOST_
-
-#endif //__ENABLE_DUMP__
-
-//////////////////////////////////////////////////////////////////////////////////
-
-static int ifx_proc_addproc(char *funcname, read_proc_t *hookfuncr, write_proc_t *hookfuncw);
-static void ifx_proc_delproc(char *funcname);
-
-//////////////////////////////////////////////////////////////////////////////////
-
-/*!
- \brief This function create the sysfs and procfs entries
- \param[in] _dev Pointer of device structure, if applied
- */
-void ifxusb_attr_create (void *_dev)
-{
- int error;
-
- struct device *dev = (struct device *) _dev;
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- error = ifx_proc_addproc("dbglevel", procfs_dbglevel_show, procfs_dbglevel_store);
- error = device_create_file(dev, &dev_attr_dbglevel);
-
- #ifdef __IS_DUAL__
- error = ifx_proc_addproc("dump_params_1", procfs_dump_params_show_1, NULL);
- error = ifx_proc_addproc("dump_params_2", procfs_dump_params_show_2, NULL);
- error = device_create_file(dev, &dev_attr_dump_params_1);
- error = device_create_file(dev, &dev_attr_dump_params_2);
- #else
- error = ifx_proc_addproc("dump_params", procfs_dump_params_show, NULL);
- error = device_create_file(dev, &dev_attr_dump_params);
- #endif
-
- #ifdef __IS_DUAL__
- error = ifx_proc_addproc("mode_1", procfs_mode_show_1, NULL);
- error = ifx_proc_addproc("mode_2", procfs_mode_show_2, NULL);
- error = device_create_file(dev, &dev_attr_mode_1);
- error = device_create_file(dev, &dev_attr_mode_2);
- #else
- error = ifx_proc_addproc("mode", procfs_mode_show, NULL);
- error = device_create_file(dev, &dev_attr_mode);
- #endif
-
- #ifdef __IS_HOST__
- #ifdef __IS_DUAL__
- error = ifx_proc_addproc("buspower_1", procfs_buspower_show_1, procfs_buspower_store_1);
- error = ifx_proc_addproc("buspower_2", procfs_buspower_show_2, procfs_buspower_store_2);
- error = device_create_file(dev, &dev_attr_buspower_1);
- error = device_create_file(dev, &dev_attr_buspower_2);
- #else
- error = ifx_proc_addproc("buspower", procfs_buspower_show, procfs_buspower_store);
- error = device_create_file(dev, &dev_attr_buspower);
- #endif
-
- #ifdef __IS_DUAL__
- error = ifx_proc_addproc("bussuspend_1", procfs_bussuspend_show_1, NULL);
- error = ifx_proc_addproc("bussuspend_2", procfs_bussuspend_show_2, NULL);
- error = device_create_file(dev, &dev_attr_bussuspend_1);
- error = device_create_file(dev, &dev_attr_bussuspend_2);
- #else
- error = ifx_proc_addproc("bussuspend", procfs_bussuspend_show, NULL);
- error = device_create_file(dev, &dev_attr_bussuspend);
- #endif
-
- #ifdef __IS_DUAL__
- error = ifx_proc_addproc("busconnected_1", procfs_busconnected_show_1, NULL);
- error = ifx_proc_addproc("busconnected_2", procfs_busconnected_show_2, NULL);
- error = device_create_file(dev, &dev_attr_busconnected_1);
- error = device_create_file(dev, &dev_attr_busconnected_2);
- #else
- error = ifx_proc_addproc("busconnected", procfs_busconnected_show, NULL);
- error = device_create_file(dev, &dev_attr_busconnected);
- #endif
-
- #ifdef __IS_DUAL__
- error = ifx_proc_addproc("connectspeed_1", procfs_connectspeed_show_1, NULL);
- error = ifx_proc_addproc("connectspeed_2", procfs_connectspeed_show_2, NULL);
- error = device_create_file(dev, &dev_attr_connectspeed_1);
- error = device_create_file(dev, &dev_attr_connectspeed_2);
- #else
- error = ifx_proc_addproc("connectspeed", procfs_connectspeed_show, NULL);
- error = device_create_file(dev, &dev_attr_connectspeed);
- #endif
- #endif
-
- #ifdef __IS_DEVICE__
- error = ifx_proc_addproc("devspeed", procfs_devspeed_show, NULL);
- error = device_create_file(dev, &dev_attr_devspeed);
- error = ifx_proc_addproc("enumspeed", procfs_enumspeed_show, NULL);
- error = device_create_file(dev, &dev_attr_enumspeed);
- #endif
-
- //////////////////////////////////////////////////////
- #ifdef __ENABLE_DUMP__
- #ifdef __IS_DUAL__
- error = ifx_proc_addproc("dump_reg_1", procfs_dump_reg_show_1, NULL);
- error = ifx_proc_addproc("dump_reg_2", procfs_dump_reg_show_2, NULL);
- error = device_create_file(dev, &dev_attr_dump_reg_1);
- error = device_create_file(dev, &dev_attr_dump_reg_2);
- #else
- error = ifx_proc_addproc("dump_reg", procfs_dump_reg_show, NULL);
- error = device_create_file(dev, &dev_attr_dump_reg);
- #endif
-
- #ifdef __IS_DUAL__
- error = ifx_proc_addproc("dump_spram_1", procfs_dump_spram_show_1, NULL);
- error = ifx_proc_addproc("dump_spram_2", procfs_dump_spram_show_2, NULL);
- error = device_create_file(dev, &dev_attr_dump_spram_1);
- error = device_create_file(dev, &dev_attr_dump_spram_2);
- #else
- error = ifx_proc_addproc("dump_spram", procfs_dump_spram_show, NULL);
- error = device_create_file(dev, &dev_attr_dump_spram);
- #endif
-
- #ifdef __IS_HOST__
- #ifdef __IS_DUAL__
- error = ifx_proc_addproc("dump_host_state_1", procfs_dump_host_state_show_1, NULL);
- error = ifx_proc_addproc("dump_host_state_2", procfs_dump_host_state_show_2, NULL);
- error = device_create_file(dev, &dev_attr_dump_host_state_1);
- error = device_create_file(dev, &dev_attr_dump_host_state_2);
- #else
- error = ifx_proc_addproc("dump_host_state", procfs_dump_host_state_show, NULL);
- error = device_create_file(dev, &dev_attr_dump_host_state);
- #endif
- #endif
- #endif //__ENABLE_DUMP__
- //////////////////////////////////////////////////////
-}
-
-
-/*!
- \brief This function remove the sysfs and procfs entries
- \param[in] _dev Pointer of device structure, if applied
- */
-void ifxusb_attr_remove (void *_dev)
-{
- struct device *dev = (struct device *) _dev;
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- ifx_proc_delproc("dbglevel");
- device_remove_file(dev, &dev_attr_dbglevel);
-
- #ifdef __IS_DUAL__
- ifx_proc_delproc("dump_params_1");
- ifx_proc_delproc("dump_params_2");
- device_remove_file(dev, &dev_attr_dump_params_1);
- device_remove_file(dev, &dev_attr_dump_params_2);
- #else
- ifx_proc_delproc("dump_params");
- device_remove_file(dev, &dev_attr_dump_params);
- #endif
-
- #ifdef __IS_DUAL__
- ifx_proc_delproc("mode_1");
- ifx_proc_delproc("mode_2");
- device_remove_file(dev, &dev_attr_mode_1);
- device_remove_file(dev, &dev_attr_mode_2);
- #else
- ifx_proc_delproc("mode");
- device_remove_file(dev, &dev_attr_mode);
- #endif
-
- #ifdef __IS_HOST__
- #ifdef __IS_DUAL__
- ifx_proc_delproc("buspower_1");
- ifx_proc_delproc("buspower_2");
- device_remove_file(dev, &dev_attr_buspower_1);
- device_remove_file(dev, &dev_attr_buspower_2);
- #else
- ifx_proc_delproc("buspower");
- device_remove_file(dev, &dev_attr_buspower);
- #endif
-
- #ifdef __IS_DUAL__
- ifx_proc_delproc("bussuspend_1");
- ifx_proc_delproc("bussuspend_2");
- device_remove_file(dev, &dev_attr_bussuspend_1);
- device_remove_file(dev, &dev_attr_bussuspend_2);
- #else
- ifx_proc_delproc("bussuspend");
- device_remove_file(dev, &dev_attr_bussuspend);
- #endif
-
- #ifdef __IS_DUAL__
- ifx_proc_delproc("busconnected_1");
- ifx_proc_delproc("busconnected_2");
- device_remove_file(dev, &dev_attr_busconnected_1);
- device_remove_file(dev, &dev_attr_busconnected_2);
- #else
- ifx_proc_delproc("busconnected");
- device_remove_file(dev, &dev_attr_busconnected);
- #endif
-
- #ifdef __IS_DUAL__
- ifx_proc_delproc("connectspeed_1");
- ifx_proc_delproc("connectspeed_2");
- device_remove_file(dev, &dev_attr_connectspeed_1);
- device_remove_file(dev, &dev_attr_connectspeed_2);
- #else
- ifx_proc_delproc("connectspeed");
- device_remove_file(dev, &dev_attr_connectspeed);
- #endif
- #endif
-
- #ifdef __IS_DEVICE__
- ifx_proc_delproc("devspeed");
- device_remove_file(dev, &dev_attr_devspeed);
- ifx_proc_delproc("enumspeed");
- device_remove_file(dev, &dev_attr_enumspeed);
- #endif
-
- #ifdef __ENABLE_DUMP__
- #ifdef __IS_DUAL__
- ifx_proc_delproc("dump_reg_1");
- ifx_proc_delproc("dump_reg_2");
- device_remove_file(dev, &dev_attr_dump_reg_1);
- device_remove_file(dev, &dev_attr_dump_reg_2);
- #else
- ifx_proc_delproc("dump_reg");
- device_remove_file(dev, &dev_attr_dump_reg);
- #endif
-
- #ifdef __IS_DUAL__
- ifx_proc_delproc("dump_spram_1");
- ifx_proc_delproc("dump_spram_2");
- device_remove_file(dev, &dev_attr_dump_spram_1);
- device_remove_file(dev, &dev_attr_dump_spram_2);
- #else
- ifx_proc_delproc("dump_spram");
- device_remove_file(dev, &dev_attr_dump_spram);
- #endif
-
- #ifdef __IS_HOST__
- #ifdef __IS_DUAL__
- ifx_proc_delproc("dump_host_state_1");
- ifx_proc_delproc("dump_host_state_2");
- device_remove_file(dev, &dev_attr_dump_host_state_1);
- device_remove_file(dev, &dev_attr_dump_host_state_2);
- #else
- ifx_proc_delproc("dump_host_state");
- device_remove_file(dev, &dev_attr_dump_host_state);
- #endif
- #endif
- #endif //__ENABLE_DUMP__
- /* AVM/WK fix: del IFXUSB root dir*/
- ifx_proc_delproc(NULL);
-}
-
-static struct proc_dir_entry * proc_ifx_root = NULL;
-
-/* initialize the proc file system and make a dir named /proc/[name] */
-static void ifx_proc_init(void)
-{
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- proc_ifx_root = proc_mkdir(ifxusb_driver_name, (void *)0);
- if (!proc_ifx_root){
- IFX_PRINT("%s proc initialization failed! \n", ifxusb_driver_name);
- return;
- }
-}
-
-/* proc file system add function for debugging. */
-static int ifx_proc_addproc(char *funcname, read_proc_t *hookfuncr, write_proc_t *hookfuncw)
-{
- struct proc_dir_entry *pe;
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- if (!proc_ifx_root)
- ifx_proc_init();
-
- if (hookfuncw == NULL)
- {
- pe = create_proc_read_entry(funcname, S_IRUGO, proc_ifx_root, hookfuncr, NULL);
- if (!pe)
- {
- IFX_PRINT("ERROR in creating read proc entry (%s)! \n", funcname);
- return -1;
- }
- }
- else
- {
- pe = create_proc_entry(funcname, S_IRUGO | S_IWUGO, proc_ifx_root);
- if (pe)
- {
- pe->read_proc = hookfuncr;
- pe->write_proc = hookfuncw;
- }
- else
- {
- IFX_PRINT("ERROR in creating proc entry (%s)! \n", funcname);
- return -1;
- }
- }
- return 0;
-}
-
-
-/* proc file system del function for removing module. */
-static void ifx_proc_delproc(char *funcname)
-{
-/* AVM/WK Fix*/
- if (funcname != NULL) {
- remove_proc_entry(funcname, proc_ifx_root);
- } else {
- remove_proc_entry(ifxusb_driver_name, NULL);
- proc_ifx_root = NULL;
- }
-}
-
-static void ifxusb_dump_params(ifxusb_core_if_t *_core_if)
-{
- ifxusb_params_t *params=&_core_if->params;
-
- #ifdef __IS_HOST__
- IFX_PRINT("IFXUSB Dump Parameters ( Host Mode) \n");
- #endif //__IS_HOST__
- #ifdef __IS_DEVICE__
- IFX_PRINT("IFXUSB Dump Parameters ( Device Mode) \n");
- #endif //__IS_DEVICE__
-
- #ifdef __DESC_DMA__
- IFX_PRINT("DMA: Hermes DMA\n");
- #else
- IFX_PRINT("DMA: Non-Desc DMA\n");
- #endif
- IFX_PRINT(" Burst size: %d\n",params->dma_burst_size);
-
- if (params->speed==1)
- IFX_PRINT("Full Speed only\n");
- else if(params->speed==0)
- IFX_PRINT("Full/Hign Speed\n");
- else
- IFX_PRINT("Unkonwn setting (%d) for Speed\n",params->speed);
-
- IFX_PRINT("Total Data FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
- params->data_fifo_size,params->data_fifo_size,
- params->data_fifo_size*4, params->data_fifo_size*4
- );
-
- #ifdef __IS_DEVICE__
- IFX_PRINT("Rx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
- params->rx_fifo_size,params->rx_fifo_size,
- params->rx_fifo_size*4, params->rx_fifo_size*4
- );
- {
- int i;
- for(i=0;i<MAX_EPS_CHANNELS;i++)
- {
- IFX_PRINT("Tx FIFO #%d size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",i,
- params->tx_fifo_size[i],params->tx_fifo_size[i],
- params->tx_fifo_size[i]*4, params->tx_fifo_size[i]*4
- );
- }
- }
- #ifdef __DED_FIFO__
- IFX_PRINT("Treshold : %s Rx:%d Tx:%d \n",
- (params->thr_ctl)?"On":"Off",params->tx_thr_length,params->rx_thr_length);
- #endif
- #else //__IS_HOST__
- IFX_PRINT("Host Channels: %d\n",params->host_channels);
-
- IFX_PRINT("Rx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
- params->data_fifo_size,params->data_fifo_size,
- params->data_fifo_size*4, params->data_fifo_size*4
- );
-
- IFX_PRINT("NP Tx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
- params->nperio_tx_fifo_size,params->nperio_tx_fifo_size,
- params->nperio_tx_fifo_size*4, params->nperio_tx_fifo_size*4
- );
-
- IFX_PRINT(" P Tx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
- params->perio_tx_fifo_size,params->perio_tx_fifo_size,
- params->perio_tx_fifo_size*4, params->perio_tx_fifo_size*4
- );
- #endif //__IS_HOST__
-
- IFX_PRINT("Max Transfer size: %d(0x%06X) Bytes\n",
- params->max_transfer_size,params->max_transfer_size
- );
- IFX_PRINT("Max Packet Count: %d(0x%06X)\n",
- params->max_packet_count,params->max_packet_count
- );
-
- IFX_PRINT("PHY UTMI Width: %d\n",params->phy_utmi_width);
-
- IFX_PRINT("Turn Around Time: HS:%d FS:%d\n",params->turn_around_time_hs,params->turn_around_time_fs);
- IFX_PRINT("Timeout Calibration: HS:%d FS:%d\n",params->timeout_cal_hs,params->timeout_cal_fs);
-
-
- IFX_PRINT("==================================================\n");
- IFX_PRINT("End of Parameters Dump\n");
- IFX_PRINT("==================================================\n");
-}
-
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_driver.c b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_driver.c
deleted file mode 100644
index 23349059f4..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_driver.c
+++ /dev/null
@@ -1,970 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxusb_driver.c
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : The provides the initialization and cleanup entry
- ** points for the IFX USB driver. This module can be
- ** dynamically loaded with insmod command or built-in
- ** with kernel. When loaded or executed the ifxusb_driver_init
- ** function is called. When the module is removed (using rmmod),
- ** the ifxusb_driver_cleanup function is called.
- *****************************************************************************/
-
-/*!
- \file ifxusb_driver.c
- \brief This file contains the loading/unloading interface to the Linux driver.
-*/
-
-#include <linux/version.h>
-#include "ifxusb_version.h"
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/stat.h> /* permission constants */
-#include <linux/gpio.h>
-#include <lantiq_soc.h>
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
- #include <linux/irq.h>
-#endif
-
-#include <asm/io.h>
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
- #include <asm/irq.h>
-#endif
-
-#include "ifxusb_plat.h"
-
-#include "ifxusb_cif.h"
-
-#ifdef __IS_HOST__
- #include "ifxhcd.h"
-
- #define USB_DRIVER_DESC "IFX USB HCD driver"
- const char ifxusb_driver_name[] = "ifxusb_hcd";
-
- #ifdef __IS_DUAL__
- ifxhcd_hcd_t ifxusb_hcd_1;
- ifxhcd_hcd_t ifxusb_hcd_2;
- const char ifxusb_hcd_name_1[] = "ifxusb_hcd_1";
- const char ifxusb_hcd_name_2[] = "ifxusb_hcd_2";
- #else
- ifxhcd_hcd_t ifxusb_hcd;
- const char ifxusb_hcd_name[] = "ifxusb_hcd";
- #endif
-
- #if defined(__DO_OC_INT__)
- static unsigned int oc_int_installed=0;
- static ifxhcd_hcd_t *oc_int_id=NULL;
- #endif
-#endif
-
-#ifdef __IS_DEVICE__
- #include "ifxpcd.h"
-
- #define USB_DRIVER_DESC "IFX USB PCD driver"
- const char ifxusb_driver_name[] = "ifxusb_pcd";
-
- ifxpcd_pcd_t ifxusb_pcd;
- const char ifxusb_pcd_name[] = "ifxusb_pcd";
-#endif
-
-/* Global Debug Level Mask. */
-#ifdef __IS_HOST__
- uint32_t h_dbg_lvl = 0x00;
-#endif
-
-#ifdef __IS_DEVICE__
- uint32_t d_dbg_lvl = 0x00;
-#endif
-
-ifxusb_params_t ifxusb_module_params;
-
-static void parse_parms(void);
-
-
-#include <lantiq_irq.h>
-#define IFX_USB0_IR (INT_NUM_IM1_IRL0 + 22)
-#define IFX_USB1_IR (INT_NUM_IM2_IRL0 + 19)
-
-/*!
- \brief This function is called when a driver is unregistered. This happens when
- the rmmod command is executed. The device may or may not be electrically
- present. If it is present, the driver stops device processing. Any resources
- used on behalf of this device are freed.
-*/
-static int ifxusb_driver_remove(struct platform_device *_dev)
-{
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- #ifdef __IS_HOST__
- #if defined(__DO_OC_INT__)
- #if defined(__DO_OC_INT_ENABLE__)
- ifxusb_oc_int_off();
- #endif
-
- if(oc_int_installed && oc_int_id)
- free_irq((unsigned int)IFXUSB_OC_IRQ, oc_int_id );
- oc_int_installed=0;
- oc_int_id=NULL;
- #endif
-
- #if defined(__IS_DUAL__)
- ifxhcd_remove(&ifxusb_hcd_1);
- ifxusb_core_if_remove(&ifxusb_hcd_1.core_if );
- ifxhcd_remove(&ifxusb_hcd_2);
- ifxusb_core_if_remove(&ifxusb_hcd_2.core_if );
- #else
- ifxhcd_remove(&ifxusb_hcd);
- ifxusb_core_if_remove(&ifxusb_hcd.core_if );
- #endif
- #endif
-
- #ifdef __IS_DEVICE__
- ifxpcd_remove();
- ifxusb_core_if_remove(&ifxusb_pcd.core_if );
- #endif
-
- /* Remove the device attributes */
-
- ifxusb_attr_remove(&_dev->dev);
-
- return 0;
-}
-
-
-/* Function to setup the structures to control one usb core running as host*/
-#ifdef __IS_HOST__
-/*!
- \brief inlined by ifxusb_driver_probe(), handling host mode probing. Run at each host core.
-*/
- static inline int ifxusb_driver_probe_h(ifxhcd_hcd_t *_hcd,
- int _irq,
- uint32_t _iobase,
- uint32_t _fifomem,
- uint32_t _fifodbg
- )
- {
- int retval = 0;
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-
-#ifdef __DEV_NEW__
- ifxusb_power_off (&_hcd->core_if);
- ifxusb_phy_power_off (&_hcd->core_if); // Test
- mdelay(500);
-#endif //__DEV_NEW__
- ifxusb_power_on (&_hcd->core_if);
- mdelay(50);
- ifxusb_phy_power_on (&_hcd->core_if); // Test
- mdelay(50);
- ifxusb_hard_reset(&_hcd->core_if);
- retval =ifxusb_core_if_init(&_hcd->core_if,
- _irq,
- _iobase,
- _fifomem,
- _fifodbg);
- if(retval)
- return retval;
-
- ifxusb_host_core_init(&_hcd->core_if,&ifxusb_module_params);
-
- ifxusb_disable_global_interrupts( &_hcd->core_if);
-
- /* The driver is now initialized and need to be registered into Linux USB sub-system */
-
- retval = ifxhcd_init(_hcd); // hook the hcd into usb ss
-
- if (retval != 0)
- {
- IFX_ERROR("_hcd_init failed\n");
- return retval;
- }
-
- //ifxusb_enable_global_interrupts( _hcd->core_if ); // this should be done at hcd_start , including hcd_interrupt
- return 0;
- }
-#endif //__IS_HOST__
-
-#ifdef __IS_DEVICE__
-/*!
- \brief inlined by ifxusb_driver_probe(), handling device mode probing.
-*/
- static inline int ifxusb_driver_probe_d(ifxpcd_pcd_t *_pcd,
- int _irq,
- uint32_t _iobase,
- uint32_t _fifomem,
- uint32_t _fifodbg
- )
- {
- int retval = 0;
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-#ifdef __DEV_NEW__
- ifxusb_power_off (&_pcd->core_if);
- ifxusb_phy_power_off (&_pcd->core_if); // Test
- mdelay(500);
-#endif // __DEV_NEW__
- ifxusb_power_on (&_pcd->core_if);
- mdelay(50);
- ifxusb_phy_power_on (&_pcd->core_if); // Test
- mdelay(50);
- ifxusb_hard_reset(&_pcd->core_if);
- retval =ifxusb_core_if_init(&_pcd->core_if,
- _irq,
- _iobase,
- _fifomem,
- _fifodbg);
- if(retval)
- return retval;
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- ifxusb_dev_core_init(&_pcd->core_if,&ifxusb_module_params);
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- ifxusb_disable_global_interrupts( &_pcd->core_if);
-
- /* The driver is now initialized and need to be registered into
- Linux USB Gadget sub-system
- */
- retval = ifxpcd_init();
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-
- if (retval != 0)
- {
- IFX_ERROR("_pcd_init failed\n");
- return retval;
- }
- //ifxusb_enable_global_interrupts( _pcd->core_if ); // this should be done at gadget bind or start
- return 0;
- }
-#endif //__IS_DEVICE__
-
-
-
-/*!
- \brief This function is called by module management in 2.6 kernel or by ifxusb_driver_init with 2.4 kernel
- It is to probe and setup IFXUSB core(s).
-*/
-static int ifxusb_driver_probe(struct platform_device *_dev)
-{
- int retval = 0;
- int *pins = _dev->dev.platform_data;
- if (ltq_is_vr9()) {
- gpio_request(6, "id1");
- gpio_request(9, "id2");
- gpio_direction_input(6);
- gpio_direction_input(9);
- }
- if (pins) {
- if (pins[0]) {
- gpio_request(pins[0], "vbus1");
- gpio_direction_output(pins[0], 1);
- }
- if (pins[1] && ltq_is_vr9()) {
- gpio_request(pins[1], "vbus2");
- gpio_direction_output(pins[1], 1);
- }
- }
- // Parsing and store the parameters
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- parse_parms();
-
- #ifdef __IS_HOST__
- #if defined(__IS_DUAL__)
- memset(&ifxusb_hcd_1, 0, sizeof(ifxhcd_hcd_t));
- memset(&ifxusb_hcd_2, 0, sizeof(ifxhcd_hcd_t));
-
- ifxusb_hcd_1.core_if.core_no=0;
- ifxusb_hcd_2.core_if.core_no=1;
- ifxusb_hcd_1.core_if.core_name=(char *)ifxusb_hcd_name_1;
- ifxusb_hcd_2.core_if.core_name=(char *)ifxusb_hcd_name_2;
-
- ifxusb_hcd_1.dev=&_dev->dev;
- ifxusb_hcd_2.dev=&_dev->dev;
-
- retval = ifxusb_driver_probe_h(&ifxusb_hcd_1,
- IFX_USB0_IR,
- IFXUSB1_IOMEM_BASE,
- IFXUSB1_FIFOMEM_BASE,
- IFXUSB1_FIFODBG_BASE
- );
- if(retval)
- goto ifxusb_driver_probe_fail;
-
- retval = ifxusb_driver_probe_h(&ifxusb_hcd_2,
- IFX_USB1_IR,
- IFXUSB2_IOMEM_BASE,
- IFXUSB2_FIFOMEM_BASE,
- IFXUSB2_FIFODBG_BASE
- );
- if(retval)
- goto ifxusb_driver_probe_fail;
-
- #elif defined(__IS_FIRST__)
- memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
-
- ifxusb_hcd.core_if.core_no=0;
- ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
-
- ifxusb_hcd.dev=&_dev->dev;
-
- retval = ifxusb_driver_probe_h(&ifxusb_hcd,
- IFX_USB0_IR,
- IFXUSB1_IOMEM_BASE,
- IFXUSB1_FIFOMEM_BASE,
- IFXUSB1_FIFODBG_BASE
- );
- if(retval)
- goto ifxusb_driver_probe_fail;
-
- #elif defined(__IS_SECOND__)
- memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
-
- ifxusb_hcd.core_if.core_no=1;
- ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
-
- ifxusb_hcd.dev=&_dev->dev;
-
- retval = ifxusb_driver_probe_h(&ifxusb_hcd,
- IFX_USB1_IR,
- IFXUSB2_IOMEM_BASE,
- IFXUSB2_FIFOMEM_BASE,
- IFXUSB2_FIFODBG_BASE
- );
- if(retval)
- goto ifxusb_driver_probe_fail;
-
- #else
- memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
-
- ifxusb_hcd.core_if.core_no=0;
- ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
-
- ifxusb_hcd.dev=&_dev->dev;
-
- retval = ifxusb_driver_probe_h(&ifxusb_hcd,
- IFXUSB_IRQ,
- IFXUSB_IOMEM_BASE,
- IFXUSB_FIFOMEM_BASE,
- IFXUSB_FIFODBG_BASE
- );
- if(retval)
- goto ifxusb_driver_probe_fail;
- #endif
-
- #if defined(__DO_OC_INT__)
- IFXUSB_DEBUGPL( DBG_CIL, "registering (overcurrent) handler for irq%d\n", IFXUSB_OC_IRQ);
- #if defined(__IS_DUAL__)
- request_irq((unsigned int)IFXUSB_OC_IRQ, &ifx_hcd_oc_irq,
-// SA_INTERRUPT|SA_SHIRQ, "ifxusb_oc", (void *)&ifxusb_hcd_1);
- IRQF_DISABLED | IRQF_SHARED, "ifxusb_oc", (void *)&ifxusb_hcd_1);
- oc_int_id=&ifxusb_hcd_1;
- #else
- request_irq((unsigned int)IFXUSB_OC_IRQ, &ifx_hcd_oc_irq,
-// SA_INTERRUPT|SA_SHIRQ, "ifxusb_oc", (void *)&ifxusb_hcd);
- IRQF_DISABLED | IRQF_SHARED, "ifxusb_oc", (void *)&ifxusb_hcd);
- oc_int_id=&ifxusb_hcd;
- #endif
- oc_int_installed=1;
-
- #if defined(__DO_OC_INT_ENABLE__)
- ifxusb_oc_int_on();
- #endif
- #endif
-
- #endif
-
- #ifdef __IS_DEVICE__
- memset(&ifxusb_pcd, 0, sizeof(ifxpcd_pcd_t));
- ifxusb_pcd.core_if.core_name=(char *)&ifxusb_pcd_name[0];
-
- ifxusb_pcd.dev=&_dev->dev;
-
- #if defined(__IS_FIRST__)
- ifxusb_pcd.core_if.core_no=0;
- retval = ifxusb_driver_probe_d(&ifxusb_pcd,
- IFXUSB1_IRQ,
- IFXUSB1_IOMEM_BASE,
- IFXUSB1_FIFOMEM_BASE,
- IFXUSB1_FIFODBG_BASE
- );
- #elif defined(__IS_SECOND__)
- ifxusb_pcd.core_if.core_no=1;
- retval = ifxusb_driver_probe_d(&ifxusb_pcd,
- IFXUSB2_IRQ,
- IFXUSB2_IOMEM_BASE,
- IFXUSB2_FIFOMEM_BASE,
- IFXUSB2_FIFODBG_BASE
- );
- #else
- ifxusb_pcd.core_if.core_no=0;
- retval = ifxusb_driver_probe_d(&ifxusb_pcd,
- IFXUSB_IRQ,
- IFXUSB_IOMEM_BASE,
- IFXUSB_FIFOMEM_BASE,
- IFXUSB_FIFODBG_BASE
- );
- #endif
- if(retval)
- goto ifxusb_driver_probe_fail;
- #endif
-
- ifxusb_attr_create(&_dev->dev);
-
- return 0;
-
-ifxusb_driver_probe_fail:
- ifxusb_driver_remove(_dev);
- return retval;
-}
-
-
-
-/*!
- \brief This function is called when the ifxusb_driver is installed with the insmod command.
-*/
-
-
-static struct platform_driver ifxusb_driver = {
- .driver = {
- .name = ifxusb_driver_name,
- .owner = THIS_MODULE,
- },
- .probe = ifxusb_driver_probe,
- .remove = ifxusb_driver_remove,
-};
-
-int __init ifxusb_driver_init(void)
-{
- int retval = 0;
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- IFX_PRINT("%s: version %s\n", ifxusb_driver_name, IFXUSB_VERSION);
-
- retval = platform_driver_register(&ifxusb_driver);
-
- if (retval < 0) {
- IFX_ERROR("%s retval=%d\n", __func__, retval);
- return retval;
- }
- return retval;
-}
-
-#if 0 // 2.4
- int __init ifxusb_driver_init(void)
- {
- int retval = 0;
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- IFX_PRINT("%s: version %s\n", ifxusb_driver_name, IFXUSB_VERSION);
- retval = ifxusb_driver_probe();
-
- if (retval < 0) {
- IFX_ERROR("%s retval=%d\n", __func__, retval);
- return retval;
- }
-
- return retval;
- }
-#endif
-
-module_init(ifxusb_driver_init);
-
-
-/*!
- \brief This function is called when the driver is removed from the kernel
- with the rmmod command. The driver unregisters itself with its bus
- driver.
-*/
-
-void __exit ifxusb_driver_cleanup(void)
-{
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-
- platform_driver_unregister(&ifxusb_driver);
-
- IFX_PRINT("%s module removed\n", ifxusb_driver_name);
-}
-#if 0
- void __exit ifxusb_driver_cleanup(void)
- {
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- ifxusb_driver_remove();
- IFX_PRINT("%s module removed\n", ifxusb_driver_name);
- }
-#endif
-module_exit(ifxusb_driver_cleanup);
-
-
-
-MODULE_DESCRIPTION(USB_DRIVER_DESC);
-MODULE_AUTHOR("Infineon");
-MODULE_LICENSE("GPL");
-
-
-
-// Parameters set when loaded
-//static long dbg_lvl =0xFFFFFFFF;
-static long dbg_lvl =0;
-static short dma_burst_size =-1;
-static short speed =-1;
-static long data_fifo_size =-1;
-#ifdef __IS_DEVICE__
- static long rx_fifo_size =-1;
- #ifdef __DED_FIFO__
- static long tx_fifo_size_00 =-1;
- static long tx_fifo_size_01 =-1;
- static long tx_fifo_size_02 =-1;
- static long tx_fifo_size_03 =-1;
- static long tx_fifo_size_04 =-1;
- static long tx_fifo_size_05 =-1;
- static long tx_fifo_size_06 =-1;
- static long tx_fifo_size_07 =-1;
- static long tx_fifo_size_08 =-1;
- static long tx_fifo_size_09 =-1;
- static long tx_fifo_size_10 =-1;
- static long tx_fifo_size_11 =-1;
- static long tx_fifo_size_12 =-1;
- static long tx_fifo_size_13 =-1;
- static long tx_fifo_size_14 =-1;
- static long tx_fifo_size_15 =-1;
- static short thr_ctl=-1;
- static long tx_thr_length =-1;
- static long rx_thr_length =-1;
- #else
- static long nperio_tx_fifo_size =-1;
- static long perio_tx_fifo_size_01 =-1;
- static long perio_tx_fifo_size_02 =-1;
- static long perio_tx_fifo_size_03 =-1;
- static long perio_tx_fifo_size_04 =-1;
- static long perio_tx_fifo_size_05 =-1;
- static long perio_tx_fifo_size_06 =-1;
- static long perio_tx_fifo_size_07 =-1;
- static long perio_tx_fifo_size_08 =-1;
- static long perio_tx_fifo_size_09 =-1;
- static long perio_tx_fifo_size_10 =-1;
- static long perio_tx_fifo_size_11 =-1;
- static long perio_tx_fifo_size_12 =-1;
- static long perio_tx_fifo_size_13 =-1;
- static long perio_tx_fifo_size_14 =-1;
- static long perio_tx_fifo_size_15 =-1;
- #endif
- static short dev_endpoints =-1;
-#endif
-
-#ifdef __IS_HOST__
- static long rx_fifo_size =-1;
- static long nperio_tx_fifo_size =-1;
- static long perio_tx_fifo_size =-1;
- static short host_channels =-1;
-#endif
-
-static long max_transfer_size =-1;
-static long max_packet_count =-1;
-static long phy_utmi_width =-1;
-static long turn_around_time_hs =-1;
-static long turn_around_time_fs =-1;
-static long timeout_cal_hs =-1;
-static long timeout_cal_fs =-1;
-
-/*!
- \brief Parsing the parameters taken when module load
-*/
-static void parse_parms(void)
-{
-
- IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
- #ifdef __IS_HOST__
- h_dbg_lvl=dbg_lvl;
- #endif
- #ifdef __IS_DEVICE__
- d_dbg_lvl=dbg_lvl;
- #endif
-
- switch(dma_burst_size)
- {
- case 0:
- case 1:
- case 4:
- case 8:
- case 16:
- ifxusb_module_params.dma_burst_size=dma_burst_size;
- break;
- default:
- ifxusb_module_params.dma_burst_size=default_param_dma_burst_size;
- }
-
- if(speed==0 || speed==1)
- ifxusb_module_params.speed=speed;
- else
- ifxusb_module_params.speed=default_param_speed;
-
- if(max_transfer_size>=2048 && max_transfer_size<=65535)
- ifxusb_module_params.max_transfer_size=max_transfer_size;
- else
- ifxusb_module_params.max_transfer_size=default_param_max_transfer_size;
-
- if(max_packet_count>=15 && max_packet_count<=511)
- ifxusb_module_params.max_packet_count=max_packet_count;
- else
- ifxusb_module_params.max_packet_count=default_param_max_packet_count;
-
- switch(phy_utmi_width)
- {
- case 8:
- case 16:
- ifxusb_module_params.phy_utmi_width=phy_utmi_width;
- break;
- default:
- ifxusb_module_params.phy_utmi_width=default_param_phy_utmi_width;
- }
-
- if(turn_around_time_hs>=0 && turn_around_time_hs<=7)
- ifxusb_module_params.turn_around_time_hs=turn_around_time_hs;
- else
- ifxusb_module_params.turn_around_time_hs=default_param_turn_around_time_hs;
-
- if(turn_around_time_fs>=0 && turn_around_time_fs<=7)
- ifxusb_module_params.turn_around_time_fs=turn_around_time_fs;
- else
- ifxusb_module_params.turn_around_time_fs=default_param_turn_around_time_fs;
-
- if(timeout_cal_hs>=0 && timeout_cal_hs<=7)
- ifxusb_module_params.timeout_cal_hs=timeout_cal_hs;
- else
- ifxusb_module_params.timeout_cal_hs=default_param_timeout_cal_hs;
-
- if(timeout_cal_fs>=0 && timeout_cal_fs<=7)
- ifxusb_module_params.timeout_cal_fs=timeout_cal_fs;
- else
- ifxusb_module_params.timeout_cal_fs=default_param_timeout_cal_fs;
-
- if(data_fifo_size>=32 && data_fifo_size<=32768)
- ifxusb_module_params.data_fifo_size=data_fifo_size;
- else
- ifxusb_module_params.data_fifo_size=default_param_data_fifo_size;
-
- #ifdef __IS_HOST__
- if(host_channels>=1 && host_channels<=16)
- ifxusb_module_params.host_channels=host_channels;
- else
- ifxusb_module_params.host_channels=default_param_host_channels;
-
- if(rx_fifo_size>=16 && rx_fifo_size<=32768)
- ifxusb_module_params.rx_fifo_size=rx_fifo_size;
- else
- ifxusb_module_params.rx_fifo_size=default_param_rx_fifo_size;
-
- if(nperio_tx_fifo_size>=16 && nperio_tx_fifo_size<=32768)
- ifxusb_module_params.nperio_tx_fifo_size=nperio_tx_fifo_size;
- else
- ifxusb_module_params.nperio_tx_fifo_size=default_param_nperio_tx_fifo_size;
-
- if(perio_tx_fifo_size>=16 && perio_tx_fifo_size<=32768)
- ifxusb_module_params.perio_tx_fifo_size=perio_tx_fifo_size;
- else
- ifxusb_module_params.perio_tx_fifo_size=default_param_perio_tx_fifo_size;
- #endif //__IS_HOST__
-
- #ifdef __IS_DEVICE__
- if(rx_fifo_size>=16 && rx_fifo_size<=32768)
- ifxusb_module_params.rx_fifo_size=rx_fifo_size;
- else
- ifxusb_module_params.rx_fifo_size=default_param_rx_fifo_size;
- #ifdef __DED_FIFO__
- if(tx_fifo_size_00>=16 && tx_fifo_size_00<=32768)
- ifxusb_module_params.tx_fifo_size[ 0]=tx_fifo_size_00;
- else
- ifxusb_module_params.tx_fifo_size[ 0]=default_param_tx_fifo_size_00;
- if(tx_fifo_size_01>=0 && tx_fifo_size_01<=32768)
- ifxusb_module_params.tx_fifo_size[ 1]=tx_fifo_size_01;
- else
- ifxusb_module_params.tx_fifo_size[ 1]=default_param_tx_fifo_size_01;
- if(tx_fifo_size_02>=0 && tx_fifo_size_02<=32768)
- ifxusb_module_params.tx_fifo_size[ 2]=tx_fifo_size_02;
- else
- ifxusb_module_params.tx_fifo_size[ 2]=default_param_tx_fifo_size_02;
- if(tx_fifo_size_03>=0 && tx_fifo_size_03<=32768)
- ifxusb_module_params.tx_fifo_size[ 3]=tx_fifo_size_03;
- else
- ifxusb_module_params.tx_fifo_size[ 3]=default_param_tx_fifo_size_03;
- if(tx_fifo_size_04>=0 && tx_fifo_size_04<=32768)
- ifxusb_module_params.tx_fifo_size[ 4]=tx_fifo_size_04;
- else
- ifxusb_module_params.tx_fifo_size[ 4]=default_param_tx_fifo_size_04;
- if(tx_fifo_size_05>=0 && tx_fifo_size_05<=32768)
- ifxusb_module_params.tx_fifo_size[ 5]=tx_fifo_size_05;
- else
- ifxusb_module_params.tx_fifo_size[ 5]=default_param_tx_fifo_size_05;
- if(tx_fifo_size_06>=0 && tx_fifo_size_06<=32768)
- ifxusb_module_params.tx_fifo_size[ 6]=tx_fifo_size_06;
- else
- ifxusb_module_params.tx_fifo_size[ 6]=default_param_tx_fifo_size_06;
- if(tx_fifo_size_07>=0 && tx_fifo_size_07<=32768)
- ifxusb_module_params.tx_fifo_size[ 7]=tx_fifo_size_07;
- else
- ifxusb_module_params.tx_fifo_size[ 7]=default_param_tx_fifo_size_07;
- if(tx_fifo_size_08>=0 && tx_fifo_size_08<=32768)
- ifxusb_module_params.tx_fifo_size[ 8]=tx_fifo_size_08;
- else
- ifxusb_module_params.tx_fifo_size[ 8]=default_param_tx_fifo_size_08;
- if(tx_fifo_size_09>=0 && tx_fifo_size_09<=32768)
- ifxusb_module_params.tx_fifo_size[ 9]=tx_fifo_size_09;
- else
- ifxusb_module_params.tx_fifo_size[ 9]=default_param_tx_fifo_size_09;
- if(tx_fifo_size_10>=0 && tx_fifo_size_10<=32768)
- ifxusb_module_params.tx_fifo_size[10]=tx_fifo_size_10;
- else
- ifxusb_module_params.tx_fifo_size[10]=default_param_tx_fifo_size_10;
- if(tx_fifo_size_11>=0 && tx_fifo_size_11<=32768)
- ifxusb_module_params.tx_fifo_size[11]=tx_fifo_size_11;
- else
- ifxusb_module_params.tx_fifo_size[11]=default_param_tx_fifo_size_11;
- if(tx_fifo_size_12>=0 && tx_fifo_size_12<=32768)
- ifxusb_module_params.tx_fifo_size[12]=tx_fifo_size_12;
- else
- ifxusb_module_params.tx_fifo_size[12]=default_param_tx_fifo_size_12;
- if(tx_fifo_size_13>=0 && tx_fifo_size_13<=32768)
- ifxusb_module_params.tx_fifo_size[13]=tx_fifo_size_13;
- else
- ifxusb_module_params.tx_fifo_size[13]=default_param_tx_fifo_size_13;
- if(tx_fifo_size_14>=0 && tx_fifo_size_14<=32768)
- ifxusb_module_params.tx_fifo_size[14]=tx_fifo_size_14;
- else
- ifxusb_module_params.tx_fifo_size[14]=default_param_tx_fifo_size_14;
- if(tx_fifo_size_15>=0 && tx_fifo_size_15<=32768)
- ifxusb_module_params.tx_fifo_size[15]=tx_fifo_size_15;
- else
- ifxusb_module_params.tx_fifo_size[15]=default_param_tx_fifo_size_15;
- if(thr_ctl==0 || thr_ctl==1)
- ifxusb_module_params.thr_ctl=thr_ctl;
- else
- ifxusb_module_params.thr_ctl=default_param_thr_ctl;
- if(tx_thr_length>=16 && tx_thr_length<=511)
- ifxusb_module_params.tx_thr_length=tx_thr_length;
- else
- ifxusb_module_params.tx_thr_length=default_param_tx_thr_length;
- if(rx_thr_length>=16 && rx_thr_length<=511)
- ifxusb_module_params.rx_thr_length=rx_thr_length;
- else
- ifxusb_module_params.rx_thr_length=default_param_rx_thr_length;
- #else //__DED_FIFO__
- if(nperio_tx_fifo_size>=16 && nperio_tx_fifo_size<=32768)
- ifxusb_module_params.tx_fifo_size[ 0]=nperio_tx_fifo_size;
- else
- ifxusb_module_params.tx_fifo_size[ 0]=default_param_nperio_tx_fifo_size;
- if(perio_tx_fifo_size_01>=0 && perio_tx_fifo_size_01<=32768)
- ifxusb_module_params.tx_fifo_size[ 1]=perio_tx_fifo_size_01;
- else
- ifxusb_module_params.tx_fifo_size[ 1]=default_param_perio_tx_fifo_size_01;
- if(perio_tx_fifo_size_02>=0 && perio_tx_fifo_size_02<=32768)
- ifxusb_module_params.tx_fifo_size[ 2]=perio_tx_fifo_size_02;
- else
- ifxusb_module_params.tx_fifo_size[ 2]=default_param_perio_tx_fifo_size_02;
- if(perio_tx_fifo_size_03>=0 && perio_tx_fifo_size_03<=32768)
- ifxusb_module_params.tx_fifo_size[ 3]=perio_tx_fifo_size_03;
- else
- ifxusb_module_params.tx_fifo_size[ 3]=default_param_perio_tx_fifo_size_03;
- if(perio_tx_fifo_size_04>=0 && perio_tx_fifo_size_04<=32768)
- ifxusb_module_params.tx_fifo_size[ 4]=perio_tx_fifo_size_04;
- else
- ifxusb_module_params.tx_fifo_size[ 4]=default_param_perio_tx_fifo_size_04;
- if(perio_tx_fifo_size_05>=0 && perio_tx_fifo_size_05<=32768)
- ifxusb_module_params.tx_fifo_size[ 5]=perio_tx_fifo_size_05;
- else
- ifxusb_module_params.tx_fifo_size[ 5]=default_param_perio_tx_fifo_size_05;
- if(perio_tx_fifo_size_06>=0 && perio_tx_fifo_size_06<=32768)
- ifxusb_module_params.tx_fifo_size[ 6]=perio_tx_fifo_size_06;
- else
- ifxusb_module_params.tx_fifo_size[ 6]=default_param_perio_tx_fifo_size_06;
- if(perio_tx_fifo_size_07>=0 && perio_tx_fifo_size_07<=32768)
- ifxusb_module_params.tx_fifo_size[ 7]=perio_tx_fifo_size_07;
- else
- ifxusb_module_params.tx_fifo_size[ 7]=default_param_perio_tx_fifo_size_07;
- if(perio_tx_fifo_size_08>=0 && perio_tx_fifo_size_08<=32768)
- ifxusb_module_params.tx_fifo_size[ 8]=perio_tx_fifo_size_08;
- else
- ifxusb_module_params.tx_fifo_size[ 8]=default_param_perio_tx_fifo_size_08;
- if(perio_tx_fifo_size_09>=0 && perio_tx_fifo_size_09<=32768)
- ifxusb_module_params.tx_fifo_size[ 9]=perio_tx_fifo_size_09;
- else
- ifxusb_module_params.tx_fifo_size[ 9]=default_param_perio_tx_fifo_size_09;
- if(perio_tx_fifo_size_10>=0 && perio_tx_fifo_size_10<=32768)
- ifxusb_module_params.tx_fifo_size[10]=perio_tx_fifo_size_10;
- else
- ifxusb_module_params.tx_fifo_size[10]=default_param_perio_tx_fifo_size_10;
- if(perio_tx_fifo_size_11>=0 && perio_tx_fifo_size_11<=32768)
- ifxusb_module_params.tx_fifo_size[11]=perio_tx_fifo_size_11;
- else
- ifxusb_module_params.tx_fifo_size[11]=default_param_perio_tx_fifo_size_11;
- if(perio_tx_fifo_size_12>=0 && perio_tx_fifo_size_12<=32768)
- ifxusb_module_params.tx_fifo_size[12]=perio_tx_fifo_size_12;
- else
- ifxusb_module_params.tx_fifo_size[12]=default_param_perio_tx_fifo_size_12;
- if(perio_tx_fifo_size_13>=0 && perio_tx_fifo_size_13<=32768)
- ifxusb_module_params.tx_fifo_size[13]=perio_tx_fifo_size_13;
- else
- ifxusb_module_params.tx_fifo_size[13]=default_param_perio_tx_fifo_size_13;
- if(perio_tx_fifo_size_14>=0 && perio_tx_fifo_size_14<=32768)
- ifxusb_module_params.tx_fifo_size[14]=perio_tx_fifo_size_14;
- else
- ifxusb_module_params.tx_fifo_size[14]=default_param_perio_tx_fifo_size_14;
- if(perio_tx_fifo_size_15>=0 && perio_tx_fifo_size_15<=32768)
- ifxusb_module_params.tx_fifo_size[15]=perio_tx_fifo_size_15;
- else
- ifxusb_module_params.tx_fifo_size[15]=default_param_perio_tx_fifo_size_15;
- #endif //__DED_FIFO__
- #endif //__IS_DEVICE__
-}
-
-
-
-
-
-
-
-module_param(dbg_lvl, long, 0444);
-MODULE_PARM_DESC(dbg_lvl, "Debug level.");
-
-module_param(dma_burst_size, short, 0444);
-MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 0, 1, 4, 8, 16");
-
-module_param(speed, short, 0444);
-MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
-
-module_param(data_fifo_size, long, 0444);
-MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
-
-#ifdef __IS_DEVICE__
- module_param(rx_fifo_size, long, 0444);
- MODULE_PARM_DESC(rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-
- #ifdef __DED_FIFO__
- module_param(tx_fifo_size_00, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_00, "Number of words in the Tx FIFO #00 16-32768");
- module_param(tx_fifo_size_01, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_01, "Number of words in the Tx FIFO #01 0-32768");
- module_param(tx_fifo_size_02, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_02, "Number of words in the Tx FIFO #02 0-32768");
- module_param(tx_fifo_size_03, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_03, "Number of words in the Tx FIFO #03 0-32768");
- module_param(tx_fifo_size_04, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_04, "Number of words in the Tx FIFO #04 0-32768");
- module_param(tx_fifo_size_05, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_05, "Number of words in the Tx FIFO #05 0-32768");
- module_param(tx_fifo_size_06, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_06, "Number of words in the Tx FIFO #06 0-32768");
- module_param(tx_fifo_size_07, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_07, "Number of words in the Tx FIFO #07 0-32768");
- module_param(tx_fifo_size_08, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_08, "Number of words in the Tx FIFO #08 0-32768");
- module_param(tx_fifo_size_09, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_09, "Number of words in the Tx FIFO #09 0-32768");
- module_param(tx_fifo_size_10, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_10, "Number of words in the Tx FIFO #10 0-32768");
- module_param(tx_fifo_size_11, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_11, "Number of words in the Tx FIFO #11 0-32768");
- module_param(tx_fifo_size_12, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_12, "Number of words in the Tx FIFO #12 0-32768");
- module_param(tx_fifo_size_13, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_13, "Number of words in the Tx FIFO #13 0-32768");
- module_param(tx_fifo_size_14, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_14, "Number of words in the Tx FIFO #14 0-32768");
- module_param(tx_fifo_size_15, long, 0444);
- MODULE_PARM_DESC(tx_fifo_size_15, "Number of words in the Tx FIFO #15 0-32768");
-
- module_param(thr_ctl, short, 0444);
- MODULE_PARM_DESC(thr_ctl, "0=Without 1=With Theshold Ctrl");
-
- module_param(tx_thr_length, long, 0444);
- MODULE_PARM_DESC(tx_thr_length, "TX Threshold length");
-
- module_param(rx_thr_length, long, 0444);
- MODULE_PARM_DESC(rx_thr_length, "RX Threshold length");
-
- #else
- module_param(nperio_tx_fifo_size, long, 0444);
- MODULE_PARM_DESC(nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-
- module_param(perio_tx_fifo_size_01, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_01, "Number of words in the periodic Tx FIFO #01 0-32768");
- module_param(perio_tx_fifo_size_02, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_02, "Number of words in the periodic Tx FIFO #02 0-32768");
- module_param(perio_tx_fifo_size_03, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_03, "Number of words in the periodic Tx FIFO #03 0-32768");
- module_param(perio_tx_fifo_size_04, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_04, "Number of words in the periodic Tx FIFO #04 0-32768");
- module_param(perio_tx_fifo_size_05, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_05, "Number of words in the periodic Tx FIFO #05 0-32768");
- module_param(perio_tx_fifo_size_06, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_06, "Number of words in the periodic Tx FIFO #06 0-32768");
- module_param(perio_tx_fifo_size_07, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_07, "Number of words in the periodic Tx FIFO #07 0-32768");
- module_param(perio_tx_fifo_size_08, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_08, "Number of words in the periodic Tx FIFO #08 0-32768");
- module_param(perio_tx_fifo_size_09, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_09, "Number of words in the periodic Tx FIFO #09 0-32768");
- module_param(perio_tx_fifo_size_10, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO #10 0-32768");
- module_param(perio_tx_fifo_size_11, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO #11 0-32768");
- module_param(perio_tx_fifo_size_12, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO #12 0-32768");
- module_param(perio_tx_fifo_size_13, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO #13 0-32768");
- module_param(perio_tx_fifo_size_14, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO #14 0-32768");
- module_param(perio_tx_fifo_size_15, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO #15 0-32768");
- #endif//__DED_FIFO__
- module_param(dev_endpoints, short, 0444);
- MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
-#endif
-
-#ifdef __IS_HOST__
- module_param(rx_fifo_size, long, 0444);
- MODULE_PARM_DESC(rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-
- module_param(nperio_tx_fifo_size, long, 0444);
- MODULE_PARM_DESC(nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-
- module_param(perio_tx_fifo_size, long, 0444);
- MODULE_PARM_DESC(perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
-
- module_param(host_channels, short, 0444);
- MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
-#endif
-
-module_param(max_transfer_size, long, 0444);
-MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
-
-module_param(max_packet_count, long, 0444);
-MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
-
-module_param(phy_utmi_width, long, 0444);
-MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
-
-module_param(turn_around_time_hs, long, 0444);
-MODULE_PARM_DESC(turn_around_time_hs, "Turn-Around time for HS");
-
-module_param(turn_around_time_fs, long, 0444);
-MODULE_PARM_DESC(turn_around_time_fs, "Turn-Around time for FS");
-
-module_param(timeout_cal_hs, long, 0444);
-MODULE_PARM_DESC(timeout_cal_hs, "Timeout Cal for HS");
-
-module_param(timeout_cal_fs, long, 0444);
-MODULE_PARM_DESC(timeout_cal_fs, "Timeout Cal for FS");
-
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_plat.h b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_plat.h
deleted file mode 100644
index a50294fdcf..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_plat.h
+++ /dev/null
@@ -1,1018 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxusb_plat.h
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : This file contains the Platform Specific constants, interfaces
- ** (functions and macros).
- ** FUNCTIONS :
- ** COMPILER : gcc
- ** REFERENCE : IFX hardware ref handbook for each plateforms
- ** COPYRIGHT :
- ** Version Control Section **
- ** $Author$
- ** $Date$
- ** $Revisions$
- ** $Log$ Revision history
- *****************************************************************************/
-
-
-/*!
- \defgroup IFXUSB_PLATEFORM_DEFINITION Platform Specific constants, interfaces (functions and macros).
- \ingroup IFXUSB_DRIVER_V3
- \brief Maintain plateform specific definitions and macros in this file.
- Each plateform has its own definition zone.
- */
-
-/*!
- \defgroup IFXUSB_PLATEFORM_MEM_ADDR Definition of memory address and size and default parameters
- \ingroup IFXUSB_PLATEFORM_DEFINITION
- */
-
-/*!
- \defgroup IFXUSB_DBG_ROUTINE Routines for debug message
- \ingroup IFXUSB_PLATEFORM_DEFINITION
- */
-
-
-/*! \file ifxusb_plat.h
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the Platform Specific constants, interfaces (functions and macros).
-*/
-
-#if !defined(__IFXUSB_PLAT_H__)
-#define __IFXUSB_PLAT_H__
-
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-
-#define IFXUSB_IOMEM_SIZE 0x00001000
-#define IFXUSB_FIFOMEM_SIZE 0x00010000
-#define IFXUSB_FIFODBG_SIZE 0x00020000
-
-
-
-/*!
- \addtogroup IFXUSB_PLATEFORM_MEM_ADDR
- */
-/*@{*/
-#if defined(__UEIP__)
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-// #define IFXUSB_IRQ 54
- #define IFXUSB_IOMEM_BASE 0x1e101000
- #define IFXUSB_FIFOMEM_BASE 0x1e120000
- #define IFXUSB_FIFODBG_BASE 0x1e140000
-// #define IFXUSB_OC_IRQ 151
-
- #ifndef DANUBE_RCU_BASE_ADDR
- #define DANUBE_RCU_BASE_ADDR (0xBF203000)
- #endif
-
- #ifndef DANUBE_CGU
- #define DANUBE_CGU (0xBF103000)
- #endif
- #ifndef DANUBE_CGU_IFCCR
- #define DANUBE_CGU_IFCCR ((volatile unsigned long *)(DANUBE_CGU+ 0x0018))
- #endif
- #ifndef DANUBE_PMU
- #define DANUBE_PMU (KSEG1+0x1F102000)
- #endif
- #ifndef DANUBE_PMU_PWDCR
- #define DANUBE_PMU_PWDCR ((volatile unsigned long *)(DANUBE_PMU+0x001C))
- #endif
-
- #ifndef DANUBE_GPIO_P0_OUT
- #define DANUBE_GPIO_P0_OUT (0xBF103000+0x10)
- #define DANUBE_GPIO_P0_DIR (0xBF103000+0x18)
- #define DANUBE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
- #define DANUBE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
- #define DANUBE_GPIO_P0_OD (0xBF103000+0x24)
- #define DANUBE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
- #define DANUBE_GPIO_P0_PUDEN (0xBF103000+0x30)
- #define DANUBE_GPIO_P1_OUT (0xBF103000+0x40)
- #define DANUBE_GPIO_P1_DIR (0xBF103000+0x48)
- #define DANUBE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
- #define DANUBE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
- #define DANUBE_GPIO_P1_OD (0xBF103000+0x54)
- #define DANUBE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
- #define DANUBE_GPIO_P1_PUDEN (0xBF103000+0x60)
- #endif
-
- #define DANUBE_RCU_USBCFG ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18))
- #define DANUBE_RCU_RESET ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10))
- #define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
- #define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
- #define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-
- #define default_param_dma_burst_size 4
-
- #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-
- #define default_param_max_transfer_size -1 //(Max, hwcfg)
- #define default_param_max_packet_count -1 //(Max, hwcfg)
- #define default_param_phy_utmi_width 16
-
- #define default_param_turn_around_time_hs 4
- #define default_param_turn_around_time_fs 4
- #define default_param_timeout_cal_hs -1 //(NoChange)
- #define default_param_timeout_cal_fs -1 //(NoChange)
-
- #define default_param_data_fifo_size -1 //(Max, hwcfg)
-
- #ifdef __IS_HOST__
- #define default_param_host_channels -1 //(Max, hwcfg)
- #define default_param_rx_fifo_size 640
- #define default_param_nperio_tx_fifo_size 640
- #define default_param_perio_tx_fifo_size 768
- #endif //__IS_HOST__
-
- #ifdef __IS_DEVICE__
- #ifdef __DED_INTR__
- #define default_param_rx_fifo_size 1024
- #define default_param_nperio_tx_fifo_size 1016
- #define default_param_perio_tx_fifo_size_01 8
- #else
- #define default_param_rx_fifo_size 1024
- #define default_param_nperio_tx_fifo_size 1024
- #define default_param_perio_tx_fifo_size_01 0
- #endif
- #define default_param_perio_tx_fifo_size_02 0
- #define default_param_perio_tx_fifo_size_03 0
- #define default_param_perio_tx_fifo_size_04 0
- #define default_param_perio_tx_fifo_size_05 0
- #define default_param_perio_tx_fifo_size_06 0
- #define default_param_perio_tx_fifo_size_07 0
- #define default_param_perio_tx_fifo_size_08 0
- #define default_param_perio_tx_fifo_size_09 0
- #define default_param_perio_tx_fifo_size_10 0
- #define default_param_perio_tx_fifo_size_11 0
- #define default_param_perio_tx_fifo_size_12 0
- #define default_param_perio_tx_fifo_size_13 0
- #define default_param_perio_tx_fifo_size_14 0
- #define default_param_perio_tx_fifo_size_15 0
- #endif //__IS_DEVICE__
-
- #elif defined(__IS_AMAZON_SE__)
- //#include <asm/amazon_se/amazon_se.h>
- //#include <asm/amazon_se/irq.h>
-
-// #define IFXUSB_IRQ 31
- #define IFXUSB_IOMEM_BASE 0x1e101000
- #define IFXUSB_FIFOMEM_BASE 0x1e120000
- #define IFXUSB_FIFODBG_BASE 0x1e140000
-// #define IFXUSB_OC_IRQ 20
-
- #ifndef AMAZON_SE_RCU_BASE_ADDR
- #define AMAZON_SE_RCU_BASE_ADDR (0xBF203000)
- #endif
- #define AMAZON_SE_RCU_USBCFG ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18))
- #define AMAZON_SE_RCU_RESET ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10))
- #define AMAZON_SE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
- #define AMAZON_SE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
- #define AMAZON_SE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-
- #ifndef AMAZON_SE_GPIO_P0_OUT
- #define AMAZON_SE_GPIO_P0_OUT (0xBF103000+0x10)
- #define AMAZON_SE_GPIO_P0_DIR (0xBF103000+0x18)
- #define AMAZON_SE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
- #define AMAZON_SE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
- #define AMAZON_SE_GPIO_P0_OD (0xBF103000+0x24)
- #define AMAZON_SE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
- #define AMAZON_SE_GPIO_P0_PUDEN (0xBF103000+0x30)
- #define AMAZON_SE_GPIO_P1_OUT (0xBF103000+0x40)
- #define AMAZON_SE_GPIO_P1_DIR (0xBF103000+0x48)
- #define AMAZON_SE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
- #define AMAZON_SE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
- #define AMAZON_SE_GPIO_P1_OD (0xBF103000+0x54)
- #define AMAZON_SE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
- #define AMAZON_SE_GPIO_P1_PUDEN (0xBF103000+0x60)
- #endif
-
- #ifndef AMAZON_SE_CGU
- #define AMAZON_SE_CGU (0xBF103000)
- #endif
- #ifndef AMAZON_SE_CGU_IFCCR
- #define AMAZON_SE_CGU_IFCCR ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018))
- #endif
- #ifndef AMAZON_SE_PMU
- #define AMAZON_SE_PMU (KSEG1+0x1F102000)
- #endif
- #ifndef AMAZON_SE_PMU_PWDCR
- #define AMAZON_SE_PMU_PWDCR ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C))
- #endif
-
- #define default_param_dma_burst_size 4
-
- #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-
- #define default_param_max_transfer_size -1 //(Max, hwcfg)
- #define default_param_max_packet_count -1 //(Max, hwcfg)
- #define default_param_phy_utmi_width 16
-
- #define default_param_turn_around_time_hs 4 //(NoChange)
- #define default_param_turn_around_time_fs 4 //(NoChange)
- #define default_param_timeout_cal_hs -1 //(NoChange)
- #define default_param_timeout_cal_fs -1 //(NoChange)
-
- #define default_param_data_fifo_size -1 //(Max, hwcfg)
-
- #ifdef __IS_HOST__
- #define default_param_host_channels -1 //(Max, hwcfg)
- #define default_param_rx_fifo_size 240
- #define default_param_nperio_tx_fifo_size 240
- #define default_param_perio_tx_fifo_size 32
- #endif //__IS_HOST__
- #ifdef __IS_DEVICE__
- #ifdef __DED_INTR__
- #define default_param_rx_fifo_size 256
- #define default_param_nperio_tx_fifo_size 248
- #define default_param_perio_tx_fifo_size_01 8
- #else
- #define default_param_rx_fifo_size 256
- #define default_param_nperio_tx_fifo_size 256
- #define default_param_perio_tx_fifo_size_01 0
- #endif
- #define default_param_perio_tx_fifo_size_02 0
- #define default_param_perio_tx_fifo_size_03 0
- #define default_param_perio_tx_fifo_size_04 0
- #define default_param_perio_tx_fifo_size_05 0
- #define default_param_perio_tx_fifo_size_06 0
- #define default_param_perio_tx_fifo_size_07 0
- #define default_param_perio_tx_fifo_size_08 0
- #define default_param_perio_tx_fifo_size_09 0
- #define default_param_perio_tx_fifo_size_10 0
- #define default_param_perio_tx_fifo_size_11 0
- #define default_param_perio_tx_fifo_size_12 0
- #define default_param_perio_tx_fifo_size_13 0
- #define default_param_perio_tx_fifo_size_14 0
- #define default_param_perio_tx_fifo_size_15 0
- #endif //__IS_DEVICE__
-
- #elif defined(__IS_AR9__)
-// #define IFXUSB1_IRQ 54
- #define IFXUSB1_IOMEM_BASE 0x1E101000
- #define IFXUSB1_FIFOMEM_BASE 0x1E120000
- #define IFXUSB1_FIFODBG_BASE 0x1E140000
-
-// #define IFXUSB2_IRQ 83
- #define IFXUSB2_IOMEM_BASE 0x1E106000
- #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
- #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
-
-// #define IFXUSB_OC_IRQ 60
-
- #ifndef AR9_RCU_BASE_ADDR
- #define AR9_RCU_BASE_ADDR (0xBF203000)
- #endif
-
- #ifndef AR9_CGU
- #define AR9_CGU (0xBF103000)
- #endif
- #ifndef AR9_CGU_IFCCR
- #define AR9_CGU_IFCCR ((volatile unsigned long *)(AR9_CGU+ 0x0018))
- #endif
-
- #ifndef AR9_PMU
- #define AR9_PMU (KSEG1+0x1F102000)
- #endif
- #ifndef AR9_PMU_PWDCR
- #define AR9_PMU_PWDCR ((volatile unsigned long *)(AR9_PMU+0x001C))
- #endif
-
- #ifndef AR9_GPIO_P0_OUT
- #define AR9_GPIO_P0_OUT (0xBF103000+0x10)
- #define AR9_GPIO_P0_DIR (0xBF103000+0x18)
- #define AR9_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
- #define AR9_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
- #define AR9_GPIO_P0_OD (0xBF103000+0x24)
- #define AR9_GPIO_P0_PUDSEL (0xBF103000+0x2C)
- #define AR9_GPIO_P0_PUDEN (0xBF103000+0x30)
- #define AR9_GPIO_P1_OUT (0xBF103000+0x40)
- #define AR9_GPIO_P1_DIR (0xBF103000+0x48)
- #define AR9_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
- #define AR9_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
- #define AR9_GPIO_P1_OD (0xBF103000+0x54)
- #define AR9_GPIO_P1_PUDSEL (0xBF103000+0x5C)
- #define AR9_GPIO_P1_PUDEN (0xBF103000+0x60)
- #endif
-
- #define AR9_RCU_USB1CFG ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x18))
- #define AR9_RCU_USB2CFG ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x34))
- #define AR9_RCU_USBRESET ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x10))
- #define AR9_USBCFG_ARB 7 //
- #define AR9_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
- #define AR9_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
- #define AR9_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
-
- #define default_param_dma_burst_size 4
-
- #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-
- #define default_param_max_transfer_size -1 //(Max, hwcfg)
- #define default_param_max_packet_count -1 //(Max, hwcfg)
- #define default_param_phy_utmi_width 16
-
- #define default_param_turn_around_time_hs 4 //(NoChange)
- #define default_param_turn_around_time_fs 4 //(NoChange)
- #define default_param_timeout_cal_hs -1 //(NoChange)
- #define default_param_timeout_cal_fs -1 //(NoChange)
-
- #define default_param_data_fifo_size -1 //(Max, hwcfg)
-
- #ifdef __IS_HOST__
- #define default_param_host_channels -1 //(Max, hwcfg)
- #define default_param_rx_fifo_size 240
- #define default_param_nperio_tx_fifo_size 240
- #define default_param_perio_tx_fifo_size 32
- #endif //__IS_HOST__
- #ifdef __IS_DEVICE__
- #ifdef __DED_INTR__
- #define default_param_rx_fifo_size 256
-// #define default_param_nperio_tx_fifo_size 248
-// #define default_param_perio_tx_fifo_size_01 8
- #define default_param_nperio_tx_fifo_size 252
- #define default_param_perio_tx_fifo_size_01 4
- #else
- #define default_param_rx_fifo_size 256
- #define default_param_nperio_tx_fifo_size 256
- #define default_param_perio_tx_fifo_size_01 0
- #endif
- #define default_param_perio_tx_fifo_size_02 0
- #define default_param_perio_tx_fifo_size_03 0
- #define default_param_perio_tx_fifo_size_04 0
- #define default_param_perio_tx_fifo_size_05 0
- #define default_param_perio_tx_fifo_size_06 0
- #define default_param_perio_tx_fifo_size_07 0
- #define default_param_perio_tx_fifo_size_08 0
- #define default_param_perio_tx_fifo_size_09 0
- #define default_param_perio_tx_fifo_size_10 0
- #define default_param_perio_tx_fifo_size_11 0
- #define default_param_perio_tx_fifo_size_12 0
- #define default_param_perio_tx_fifo_size_13 0
- #define default_param_perio_tx_fifo_size_14 0
- #define default_param_perio_tx_fifo_size_15 0
- #endif //__IS_DEVICE__
-
- #elif defined(__IS_VR9__)
-// #define IFXUSB1_IRQ 54
- #define IFXUSB1_IOMEM_BASE 0x1E101000
- #define IFXUSB1_FIFOMEM_BASE 0x1E120000
- #define IFXUSB1_FIFODBG_BASE 0x1E140000
-
-// #define IFXUSB2_IRQ 83
- #define IFXUSB2_IOMEM_BASE 0x1E106000
- #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
- #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
-// #define IFXUSB_OC_IRQ 60
-
- #ifndef VR9_RCU_BASE_ADDR
- #define VR9_RCU_BASE_ADDR (0xBF203000)
- #endif
-
- #ifndef VR9_CGU
- #define VR9_CGU (0xBF103000)
- #endif
- #ifndef VR9_CGU_IFCCR
- #define VR9_CGU_IFCCR ((volatile unsigned long *)(VR9_CGU+ 0x0018))
- #endif
-
- #ifndef VR9_PMU
- #define VR9_PMU (KSEG1+0x1F102000)
- #endif
- #ifndef VR9_PMU_PWDCR
- #define VR9_PMU_PWDCR ((volatile unsigned long *)(VR9_PMU+0x001C))
- #endif
-
- #ifndef VR9_GPIO_P0_OUT
- #define VR9_GPIO_P0_OUT (0xBF103000+0x10)
- #define VR9_GPIO_P0_DIR (0xBF103000+0x18)
- #define VR9_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
- #define VR9_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
- #define VR9_GPIO_P0_OD (0xBF103000+0x24)
- #define VR9_GPIO_P0_PUDSEL (0xBF103000+0x2C)
- #define VR9_GPIO_P0_PUDEN (0xBF103000+0x30)
- #define VR9_GPIO_P1_OUT (0xBF103000+0x40)
- #define VR9_GPIO_P1_DIR (0xBF103000+0x48)
- #define VR9_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
- #define VR9_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
- #define VR9_GPIO_P1_OD (0xBF103000+0x54)
- #define VR9_GPIO_P1_PUDSEL (0xBF103000+0x5C)
- #define VR9_GPIO_P1_PUDEN (0xBF103000+0x60)
- #endif
-
- #define VR9_RCU_USB1CFG ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x18))
- #define VR9_RCU_USB2CFG ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x34))
- #define VR9_RCU_USB_ANA_CFG1A ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x38))
- #define VR9_RCU_USB_ANA_CFG1B ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x3C))
- #define VR9_RCU_USBRESET ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x10))
- #define VR9_RCU_USBRESET2 ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x48))
- #define VR9_USBCFG_ARB 7 //
- #define VR9_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
- #define VR9_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
- #define VR9_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-
- /*== AVM/BC 20101220 Workaround VR9 DMA burst size ==
- * Using 2 Devices in diferent ports cause a general USB Host Error.
- * Workaround found in UGW4.3
- */
-// #define default_param_dma_burst_size 4 //(ALL)
- //WA for AHB
- #define default_param_dma_burst_size 0 //(ALL)
-
- #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-
- #define default_param_max_transfer_size -1 //(Max, hwcfg)
- #define default_param_max_packet_count -1 //(Max, hwcfg)
- #define default_param_phy_utmi_width 16
-
- #define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
- #define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
- #define default_param_timeout_cal_hs -1 //(NoChange)
- #define default_param_timeout_cal_fs -1 //(NoChange)
-
- #define default_param_data_fifo_size -1 //(Max, hwcfg)
-
- #ifdef __IS_HOST__
- #define default_param_host_channels -1 //(Max, hwcfg)
- #define default_param_rx_fifo_size 240
- #define default_param_nperio_tx_fifo_size 240
- #define default_param_perio_tx_fifo_size 32
- #endif //__IS_HOST__
- #ifdef __IS_DEVICE__
-#if 0
- #define default_param_rx_fifo_size 256
- #define default_param_tx_fifo_size_00 -1
- #define default_param_tx_fifo_size_01 -1
- #define default_param_tx_fifo_size_02 -1
-#else
- #define default_param_rx_fifo_size 256
- #define default_param_tx_fifo_size_00 32
- #define default_param_tx_fifo_size_01 200
- #define default_param_tx_fifo_size_02 8
-#endif
- #define default_param_tx_fifo_size_03 -1
- #define default_param_tx_fifo_size_04 -1
- #define default_param_tx_fifo_size_05 -1
- #define default_param_tx_fifo_size_06 -1
- #define default_param_tx_fifo_size_07 -1
- #define default_param_tx_fifo_size_08 -1
- #define default_param_tx_fifo_size_09 -1
- #define default_param_tx_fifo_size_10 -1
- #define default_param_tx_fifo_size_11 -1
- #define default_param_tx_fifo_size_12 -1
- #define default_param_tx_fifo_size_13 -1
- #define default_param_tx_fifo_size_14 -1
- #define default_param_tx_fifo_size_15 -1
- #define default_param_dma_unalgned_tx -1
- #define default_param_dma_unalgned_rx -1
- #define default_param_thr_ctl -1
- #define default_param_tx_thr_length -1
- #define default_param_rx_thr_length -1
- #endif //__IS_DEVICE__
- #else // __IS_VR9__
- #error "Please choose one platform!!"
- #endif // __IS_VR9__
-
-#else //UEIP
- #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-// #define IFXUSB_IRQ 54
- #define IFXUSB_IOMEM_BASE 0x1e101000
- #define IFXUSB_FIFOMEM_BASE 0x1e120000
- #define IFXUSB_FIFODBG_BASE 0x1e140000
-// #define IFXUSB_OC_IRQ 151
-
-
- #ifndef DANUBE_RCU_BASE_ADDR
- #define DANUBE_RCU_BASE_ADDR (0xBF203000)
- #endif
-
- #ifndef DANUBE_CGU
- #define DANUBE_CGU (0xBF103000)
- #endif
- #ifndef DANUBE_CGU_IFCCR
- #define DANUBE_CGU_IFCCR ((volatile unsigned long *)(DANUBE_CGU+ 0x0018))
- #endif
- #ifndef DANUBE_PMU
- #define DANUBE_PMU (KSEG1+0x1F102000)
- #endif
- #ifndef DANUBE_PMU_PWDCR
- #define DANUBE_PMU_PWDCR ((volatile unsigned long *)(DANUBE_PMU+0x001C))
- #endif
-
- #ifndef DANUBE_GPIO_P0_OUT
- #define DANUBE_GPIO_P0_OUT (0xBF103000+0x10)
- #define DANUBE_GPIO_P0_DIR (0xBF103000+0x18)
- #define DANUBE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
- #define DANUBE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
- #define DANUBE_GPIO_P0_OD (0xBF103000+0x24)
- #define DANUBE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
- #define DANUBE_GPIO_P0_PUDEN (0xBF103000+0x30)
- #define DANUBE_GPIO_P1_OUT (0xBF103000+0x40)
- #define DANUBE_GPIO_P1_DIR (0xBF103000+0x48)
- #define DANUBE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
- #define DANUBE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
- #define DANUBE_GPIO_P1_OD (0xBF103000+0x54)
- #define DANUBE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
- #define DANUBE_GPIO_P1_PUDEN (0xBF103000+0x60)
- #endif
-
-
- #define DANUBE_RCU_USBCFG ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18))
- #define DANUBE_RCU_RESET ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10))
- #define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
- #define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
- #define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-
- #define default_param_dma_burst_size 4
-
- #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-
- #define default_param_max_transfer_size -1 //(Max, hwcfg)
- #define default_param_max_packet_count -1 //(Max, hwcfg)
- #define default_param_phy_utmi_width 16
-
- #define default_param_turn_around_time_hs 4 //(NoChange)
- #define default_param_turn_around_time_fs 4 //(NoChange)
- #define default_param_timeout_cal_hs -1 //(NoChange)
- #define default_param_timeout_cal_fs -1 //(NoChange)
-
- #define default_param_data_fifo_size -1 //(Max, hwcfg)
- #ifdef __IS_HOST__
- #define default_param_host_channels -1 //(Max, hwcfg)
- #define default_param_rx_fifo_size 640
- #define default_param_nperio_tx_fifo_size 640
- #define default_param_perio_tx_fifo_size 768
- #endif //__IS_HOST__
-
- #ifdef __IS_DEVICE__
- #ifdef __DED_INTR__
- #define default_param_rx_fifo_size 1024
- #define default_param_nperio_tx_fifo_size 1016
- #define default_param_perio_tx_fifo_size_01 8
- #else
- #define default_param_rx_fifo_size 1024
- #define default_param_nperio_tx_fifo_size 1024
- #define default_param_perio_tx_fifo_size_01 0
- #endif
- #define default_param_perio_tx_fifo_size_02 0
- #define default_param_perio_tx_fifo_size_03 0
- #define default_param_perio_tx_fifo_size_04 0
- #define default_param_perio_tx_fifo_size_05 0
- #define default_param_perio_tx_fifo_size_06 0
- #define default_param_perio_tx_fifo_size_07 0
- #define default_param_perio_tx_fifo_size_08 0
- #define default_param_perio_tx_fifo_size_09 0
- #define default_param_perio_tx_fifo_size_10 0
- #define default_param_perio_tx_fifo_size_11 0
- #define default_param_perio_tx_fifo_size_12 0
- #define default_param_perio_tx_fifo_size_13 0
- #define default_param_perio_tx_fifo_size_14 0
- #define default_param_perio_tx_fifo_size_15 0
- #endif //__IS_DEVICE__
-
- #elif defined(__IS_AMAZON_SE__)
- #include <asm/amazon_se/amazon_se.h>
- //#include <asm/amazon_se/irq.h>
-
-// #define IFXUSB_IRQ 31
- #define IFXUSB_IOMEM_BASE 0x1e101000
- #define IFXUSB_FIFOMEM_BASE 0x1e120000
- #define IFXUSB_FIFODBG_BASE 0x1e140000
-// #define IFXUSB_OC_IRQ 20
-
- #define AMAZON_SE_RCU_USBCFG ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18))
- #define AMAZON_SE_RCU_RESET ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10))
- #define AMAZON_SE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
- #define AMAZON_SE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
- #define AMAZON_SE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-
- #ifndef AMAZON_SE_GPIO_P0_OUT
- #define AMAZON_SE_GPIO_P0_OUT (0xBF103000+0x10)
- #define AMAZON_SE_GPIO_P0_DIR (0xBF103000+0x18)
- #define AMAZON_SE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
- #define AMAZON_SE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
- #define AMAZON_SE_GPIO_P0_OD (0xBF103000+0x24)
- #define AMAZON_SE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
- #define AMAZON_SE_GPIO_P0_PUDEN (0xBF103000+0x30)
- #define AMAZON_SE_GPIO_P1_OUT (0xBF103000+0x40)
- #define AMAZON_SE_GPIO_P1_DIR (0xBF103000+0x48)
- #define AMAZON_SE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
- #define AMAZON_SE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
- #define AMAZON_SE_GPIO_P1_OD (0xBF103000+0x54)
- #define AMAZON_SE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
- #define AMAZON_SE_GPIO_P1_PUDEN (0xBF103000+0x60)
- #endif
-
-
- #ifndef AMAZON_SE_CGU
- #define AMAZON_SE_CGU (0xBF103000)
- #endif
- #ifndef AMAZON_SE_CGU_IFCCR
- #define AMAZON_SE_CGU_IFCCR ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018))
- #endif
- #ifndef AMAZON_SE_PMU
- #define AMAZON_SE_PMU (KSEG1+0x1F102000)
- #endif
- #ifndef AMAZON_SE_PMU_PWDCR
- #define AMAZON_SE_PMU_PWDCR ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C))
- #endif
-
- #define default_param_dma_burst_size 4
-
- #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-
- #define default_param_max_transfer_size -1 //(Max, hwcfg)
- #define default_param_max_packet_count -1 //(Max, hwcfg)
- #define default_param_phy_utmi_width 16
-
- #define default_param_turn_around_time_hs 4 //(NoChange)
- #define default_param_turn_around_time_fs 4 //(NoChange)
- #define default_param_timeout_cal_hs -1 //(NoChange)
- #define default_param_timeout_cal_fs -1 //(NoChange)
-
- #define default_param_data_fifo_size -1 //(Max, hwcfg)
-
- #ifdef __IS_HOST__
- #define default_param_host_channels -1 //(Max, hwcfg)
- #define default_param_rx_fifo_size 240
- #define default_param_nperio_tx_fifo_size 240
- #define default_param_perio_tx_fifo_size 32
- #endif //__IS_HOST__
- #ifdef __IS_DEVICE__
- #ifdef __DED_INTR__
- #define default_param_rx_fifo_size 256
- #define default_param_nperio_tx_fifo_size 248
- #define default_param_perio_tx_fifo_size_01 8
- #else
- #define default_param_rx_fifo_size 256
- #define default_param_nperio_tx_fifo_size 256
- #define default_param_perio_tx_fifo_size_01 0
- #endif
- #define default_param_perio_tx_fifo_size_02 0
- #define default_param_perio_tx_fifo_size_03 0
- #define default_param_perio_tx_fifo_size_04 0
- #define default_param_perio_tx_fifo_size_05 0
- #define default_param_perio_tx_fifo_size_06 0
- #define default_param_perio_tx_fifo_size_07 0
- #define default_param_perio_tx_fifo_size_08 0
- #define default_param_perio_tx_fifo_size_09 0
- #define default_param_perio_tx_fifo_size_10 0
- #define default_param_perio_tx_fifo_size_11 0
- #define default_param_perio_tx_fifo_size_12 0
- #define default_param_perio_tx_fifo_size_13 0
- #define default_param_perio_tx_fifo_size_14 0
- #define default_param_perio_tx_fifo_size_15 0
- #endif //__IS_DEVICE__
-
- #elif defined(__IS_AR9__)
-// #define IFXUSB1_IRQ 54
- #define IFXUSB1_IOMEM_BASE 0x1E101000
- #define IFXUSB1_FIFOMEM_BASE 0x1E120000
- #define IFXUSB1_FIFODBG_BASE 0x1E140000
-
-// #define IFXUSB2_IRQ 83
- #define IFXUSB2_IOMEM_BASE 0x1E106000
- #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
- #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
-
-// #define IFXUSB_OC_IRQ 60
-
- #ifndef AMAZON_S_RCU_BASE_ADDR
- #define AMAZON_S_RCU_BASE_ADDR (0xBF203000)
- #endif
-
- #ifndef AMAZON_S_CGU
- #define AMAZON_S_CGU (0xBF103000)
- #endif
- #ifndef AMAZON_S_CGU_IFCCR
- #define AMAZON_S_CGU_IFCCR ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018))
- #endif
-
- #ifndef AMAZON_S_PMU
- #define AMAZON_S_PMU (KSEG1+0x1F102000)
- #endif
- #ifndef AMAZON_S_PMU_PWDCR
- #define AMAZON_S_PMU_PWDCR ((volatile unsigned long *)(AMAZON_S_PMU+0x001C))
- #endif
-
- #ifndef AMAZON_S_GPIO_P0_OUT
- #define AMAZON_S_GPIO_P0_OUT (0xBF103000+0x10)
- #define AMAZON_S_GPIO_P0_DIR (0xBF103000+0x18)
- #define AMAZON_S_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
- #define AMAZON_S_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
- #define AMAZON_S_GPIO_P0_OD (0xBF103000+0x24)
- #define AMAZON_S_GPIO_P0_PUDSEL (0xBF103000+0x2C)
- #define AMAZON_S_GPIO_P0_PUDEN (0xBF103000+0x30)
- #define AMAZON_S_GPIO_P1_OUT (0xBF103000+0x40)
- #define AMAZON_S_GPIO_P1_DIR (0xBF103000+0x48)
- #define AMAZON_S_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
- #define AMAZON_S_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
- #define AMAZON_S_GPIO_P1_OD (0xBF103000+0x54)
- #define AMAZON_S_GPIO_P1_PUDSEL (0xBF103000+0x5C)
- #define AMAZON_S_GPIO_P1_PUDEN (0xBF103000+0x60)
- #endif
-
- #define AMAZON_S_RCU_USB1CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18))
- #define AMAZON_S_RCU_USB2CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34))
- #define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10))
- #define AMAZON_S_USBCFG_ARB 7 //
- #define AMAZON_S_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
- #define AMAZON_S_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
- #define AMAZON_S_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
-
- #define default_param_dma_burst_size 4
-
- #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-
- #define default_param_max_transfer_size -1 //(Max, hwcfg)
- #define default_param_max_packet_count -1 //(Max, hwcfg)
- #define default_param_phy_utmi_width 16
-
- #define default_param_turn_around_time_hs 4 //(NoChange)
- #define default_param_turn_around_time_fs 4 //(NoChange)
- #define default_param_timeout_cal_hs -1 //(NoChange)
- #define default_param_timeout_cal_fs -1 //(NoChange)
-
- #define default_param_data_fifo_size -1 //(Max, hwcfg)
-
- #ifdef __IS_HOST__
- #define default_param_host_channels -1 //(Max, hwcfg)
- #define default_param_rx_fifo_size 240
- #define default_param_nperio_tx_fifo_size 240
- #define default_param_perio_tx_fifo_size 32
- #endif //__IS_HOST__
- #ifdef __IS_DEVICE__
- #ifdef __DED_INTR__
- #define default_param_rx_fifo_size 256
- #define default_param_nperio_tx_fifo_size 248
- #define default_param_perio_tx_fifo_size_01 8
- #else
- #define default_param_rx_fifo_size 256
- #define default_param_nperio_tx_fifo_size 256
- #define default_param_perio_tx_fifo_size_01 0
- #endif
- #define default_param_perio_tx_fifo_size_02 0
- #define default_param_perio_tx_fifo_size_03 0
- #define default_param_perio_tx_fifo_size_04 0
- #define default_param_perio_tx_fifo_size_05 0
- #define default_param_perio_tx_fifo_size_06 0
- #define default_param_perio_tx_fifo_size_07 0
- #define default_param_perio_tx_fifo_size_08 0
- #define default_param_perio_tx_fifo_size_09 0
- #define default_param_perio_tx_fifo_size_10 0
- #define default_param_perio_tx_fifo_size_11 0
- #define default_param_perio_tx_fifo_size_12 0
- #define default_param_perio_tx_fifo_size_13 0
- #define default_param_perio_tx_fifo_size_14 0
- #define default_param_perio_tx_fifo_size_15 0
- #endif //__IS_DEVICE__
-
- #elif defined(__IS_VR9__)
-// #define IFXUSB1_IRQ 54
- #define IFXUSB1_IOMEM_BASE 0x1E101000
- #define IFXUSB1_FIFOMEM_BASE 0x1E120000
- #define IFXUSB1_FIFODBG_BASE 0x1E140000
-
-// #define IFXUSB2_IRQ 83
- #define IFXUSB2_IOMEM_BASE 0x1E106000
- #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
- #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
-// #define IFXUSB_OC_IRQ 60
-
- #ifndef AMAZON_S_RCU_BASE_ADDR
- #define AMAZON_S_RCU_BASE_ADDR (0xBF203000)
- #endif
-
- #ifndef AMAZON_S_CGU
- #define AMAZON_S_CGU (0xBF103000)
- #endif
- #ifndef AMAZON_S_CGU_IFCCR
- #define AMAZON_S_CGU_IFCCR ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018))
- #endif
-
- #ifndef AMAZON_S_PMU
- #define AMAZON_S_PMU (KSEG1+0x1F102000)
- #endif
- #ifndef AMAZON_S_PMU_PWDCR
- #define AMAZON_S_PMU_PWDCR ((volatile unsigned long *)(AMAZON_S_PMU+0x001C))
- #endif
-
- #ifndef AMAZON_S_GPIO_P0_OUT
- #define AMAZON_S_GPIO_P0_OUT (0xBF103000+0x10)
- #define AMAZON_S_GPIO_P0_DIR (0xBF103000+0x18)
- #define AMAZON_S_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
- #define AMAZON_S_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
- #define AMAZON_S_GPIO_P0_OD (0xBF103000+0x24)
- #define AMAZON_S_GPIO_P0_PUDSEL (0xBF103000+0x2C)
- #define AMAZON_S_GPIO_P0_PUDEN (0xBF103000+0x30)
- #define AMAZON_S_GPIO_P1_OUT (0xBF103000+0x40)
- #define AMAZON_S_GPIO_P1_DIR (0xBF103000+0x48)
- #define AMAZON_S_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
- #define AMAZON_S_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
- #define AMAZON_S_GPIO_P1_OD (0xBF103000+0x54)
- #define AMAZON_S_GPIO_P1_PUDSEL (0xBF103000+0x5C)
- #define AMAZON_S_GPIO_P1_PUDEN (0xBF103000+0x60)
- #endif
-
- #define AMAZON_S_RCU_USB1CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18))
- #define AMAZON_S_RCU_USB2CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34))
- #define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10))
- #define AMAZON_S_USBCFG_ARB 7 //
- #define AMAZON_S_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
- #define AMAZON_S_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
- #define AMAZON_S_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
-
- #define default_param_dma_burst_size 4 //(ALL)
-
- #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-
- #define default_param_max_transfer_size -1 //(Max, hwcfg)
- #define default_param_max_packet_count -1 //(Max, hwcfg)
- #define default_param_phy_utmi_width 16
-
- #define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
- #define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
- #define default_param_timeout_cal_hs -1 //(NoChange)
- #define default_param_timeout_cal_fs -1 //(NoChange)
-
- #define default_param_data_fifo_size -1 //(Max, hwcfg)
-
- #ifdef __IS_HOST__
- #define default_param_host_channels -1 //(Max, hwcfg)
- #define default_param_rx_fifo_size 240
- #define default_param_nperio_tx_fifo_size 240
- #define default_param_perio_tx_fifo_size 32
- #endif //__IS_HOST__
- #ifdef __IS_DEVICE__
- #define default_param_rx_fifo_size 256
- #define default_param_tx_fifo_size_00 -1
- #define default_param_tx_fifo_size_01 -1
- #define default_param_tx_fifo_size_02 -1
- #define default_param_tx_fifo_size_03 -1
- #define default_param_tx_fifo_size_04 -1
- #define default_param_tx_fifo_size_05 -1
- #define default_param_tx_fifo_size_06 -1
- #define default_param_tx_fifo_size_07 -1
- #define default_param_tx_fifo_size_08 -1
- #define default_param_tx_fifo_size_09 -1
- #define default_param_tx_fifo_size_10 -1
- #define default_param_tx_fifo_size_11 -1
- #define default_param_tx_fifo_size_12 -1
- #define default_param_tx_fifo_size_13 -1
- #define default_param_tx_fifo_size_14 -1
- #define default_param_tx_fifo_size_15 -1
- #define default_param_dma_unalgned_tx -1
- #define default_param_dma_unalgned_rx -1
- #define default_param_thr_ctl -1
- #define default_param_tx_thr_length -1
- #define default_param_rx_thr_length -1
- #endif //__IS_DEVICE__
- #else // __IS_VR9__
- #error "Please choose one platform!!"
- #endif // __IS_VR9__
-#endif //UEIP
-
-/*@}*//*IFXUSB_PLATEFORM_MEM_ADDR*/
-
-/////////////////////////////////////////////////////////////////////////
-
-#ifdef __IS_HOST__
- #ifdef CONFIG_USB_HOST_IFX_FORCE_USB11
- #undef default_param_speed
- #define default_param_speed IFXUSB_PARAM_SPEED_FULL
- #endif
-#endif
-#ifdef __IS_DEVICE__
- #ifndef CONFIG_USB_GADGET_DUALSPEED
- #undef default_param_speed
- #define default_param_speed IFXUSB_PARAM_SPEED_FULL
- #endif
-#endif
-
-/////////////////////////////////////////////////////////////////////////
-
-static __inline__ void UDELAY( const uint32_t _usecs )
-{
- udelay( _usecs );
-}
-
-static __inline__ void MDELAY( const uint32_t _msecs )
-{
- mdelay( _msecs );
-}
-
-static __inline__ void SPIN_LOCK( spinlock_t *_lock )
-{
- spin_lock(_lock);
-}
-
-static __inline__ void SPIN_UNLOCK( spinlock_t *_lock )
-{
- spin_unlock(_lock);
-}
-
-#define SPIN_LOCK_IRQSAVE( _l, _f ) \
- { \
- spin_lock_irqsave(_l,_f); \
- }
-
-#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) \
- { \
- spin_unlock_irqrestore(_l,_f); \
- }
-
-/////////////////////////////////////////////////////////////////////////
-/*!
- \addtogroup IFXUSB_DBG_ROUTINE
- */
-/*@{*/
-#ifdef __IS_HOST__
- extern uint32_t h_dbg_lvl;
-#endif
-
-#ifdef __IS_DEVICE__
- extern uint32_t d_dbg_lvl;
-#endif
-
-/*! \brief When debug level has the DBG_CIL bit set, display CIL Debug messages. */
-#define DBG_CIL (0x2)
-/*! \brief When debug level has the DBG_CILV bit set, display CIL Verbose debug messages */
-#define DBG_CILV (0x20)
-/*! \brief When debug level has the DBG_PCD bit set, display PCD (Device) debug messages */
-#define DBG_PCD (0x4)
-/*! \brief When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug messages */
-#define DBG_PCDV (0x40)
-/*! \brief When debug level has the DBG_HCD bit set, display Host debug messages */
-#define DBG_HCD (0x8)
-/*! \brief When debug level has the DBG_HCDV bit set, display Verbose Host debug messages */
-#define DBG_HCDV (0x80)
-/*! \brief When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host mode. */
-#define DBG_HCD_URB (0x800)
-/*! \brief When debug level has any bit set, display debug messages */
-#define DBG_ANY (0xFF)
-/*! \brief All debug messages off */
-#define DBG_OFF 0
-
-#define DBG_ENTRY (0x8000)
-
-#define IFXUSB "IFXUSB: "
-
-/*!
- \fn inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
- \brief Set the Debug Level variable.
- \param _new 32-bit mask of debug level.
- \return previous debug level
- */
-static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
-{
- #ifdef __IS_HOST__
- uint32_t old = h_dbg_lvl;
- h_dbg_lvl = _new;
- #endif
-
- #ifdef __IS_DEVICE__
- uint32_t old = d_dbg_lvl;
- d_dbg_lvl = _new;
- #endif
- return old;
-}
-
-#ifdef __DEBUG__
- #ifdef __IS_HOST__
- # define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&h_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0)
- # define CHK_DEBUG_LEVEL(level) ((level) & h_dbg_lvl)
- #endif
-
- #ifdef __IS_DEVICE__
- # define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&d_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0)
- # define CHK_DEBUG_LEVEL(level) ((level) & d_dbg_lvl)
- #endif
-
- # define IFX_DEBUGP(x...) IFX_DEBUGPL(DBG_ANY, x )
-#else
- # define IFX_DEBUGPL(lvl, x...) do{}while(0)
- # define IFX_DEBUGP(x...)
- # define CHK_DEBUG_LEVEL(level) (0)
-#endif //__DEBUG__
-
-/* Print an Error message. */
-#define IFX_ERROR(x...) printk( KERN_ERR IFXUSB x )
-/* Print a Warning message. */
-#define IFX_WARN(x...) printk( KERN_WARNING IFXUSB x )
-/* Print a notice (normal but significant message). */
-#define IFX_NOTICE(x...) printk( KERN_NOTICE IFXUSB x )
-/* Basic message printing. */
-#define IFX_PRINT(x...) printk( KERN_INFO IFXUSB x )
-
-/*@}*//*IFXUSB_DBG_ROUTINE*/
-
-
-#endif //__IFXUSB_PLAT_H__
-
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_regs.h b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_regs.h
deleted file mode 100644
index 014c6dbcfd..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_regs.h
+++ /dev/null
@@ -1,1420 +0,0 @@
-/*****************************************************************************
- ** FILE NAME : ifxusb_regs.h
- ** PROJECT : IFX USB sub-system V3
- ** MODULES : IFX USB sub-system Host and Device driver
- ** SRC VERSION : 1.0
- ** DATE : 1/Jan/2009
- ** AUTHOR : Chen, Howard
- ** DESCRIPTION : This file contains the data structures for accessing the IFXUSB core
- ** registers.
- ** The application interfaces with the USB core by reading from and
- ** writing to the Control and Status Register (CSR) space through the
- ** AHB Slave interface. These registers are 32 bits wide, and the
- ** addresses are 32-bit-block aligned.
- ** CSRs are classified as follows:
- ** - Core Global Registers
- ** - Device Mode Registers
- ** - Device Global Registers
- ** - Device Endpoint Specific Registers
- ** - Host Mode Registers
- ** - Host Global Registers
- ** - Host Port CSRs
- ** - Host Channel Specific Registers
- **
- ** Only the Core Global registers can be accessed in both Device and
- ** Host modes. When the USB core is operating in one mode, either
- ** Device or Host, the application must not access registers from the
- ** other mode. When the core switches from one mode to another, the
- ** registers in the new mode of operation must be reprogrammed as they
- ** would be after a power-on reset.
- ** FUNCTIONS :
- ** COMPILER : gcc
- ** REFERENCE : Synopsys DWC-OTG Driver 2.7
- ** COPYRIGHT :
- ** Version Control Section **
- ** $Author$
- ** $Date$
- ** $Revisions$
- ** $Log$ Revision history
-*****************************************************************************/
-
-
-
-/*!
- \defgroup IFXUSB_CSR_DEFINITION Control and Status Register bit-map definition
- \ingroup IFXUSB_DRIVER_V3
- \brief Data structures for accessing the IFXUSB core registers.
- The application interfaces with the USB core by reading from and
- writing to the Control and Status Register (CSR) space through the
- AHB Slave interface. These registers are 32 bits wide, and the
- addresses are 32-bit-block aligned.
- CSRs are classified as follows:
- - Core Global Registers
- - Device Mode Registers
- - Device Global Registers
- - Device Endpoint Specific Registers
- - Host Mode Registers
- - Host Global Registers
- - Host Port CSRs
- - Host Channel Specific Registers
-
- Only the Core Global registers can be accessed in both Device andHost modes.
- When the USB core is operating in one mode, either Device or Host, the
- application must not access registers from the other mode. When the core
- switches from one mode to another, the registers in the new mode of operation
- must be reprogrammed as they would be after a power-on reset.
- */
-
-/*!
- \defgroup IFXUSB_CSR_DEVICE_GLOBAL_REG Device Mode Registers
- \ingroup IFXUSB_CSR_DEFINITION
- \brief Bit-mapped structure to access Device Mode Global Registers
- */
-
-/*!
- \defgroup IFXUSB_CSR_DEVICE_EP_REG Device Mode EP Registers
- \ingroup IFXUSB_CSR_DEFINITION
- \brief Bit-mapped structure to access Device Mode EP Registers
- There will be one set of endpoint registers per logical endpoint
- implemented.
- These registers are visible only in Device mode and must not be
- accessed in Host mode, as the results are unknown.
- */
-
-/*!
- \defgroup IFXUSB_CSR_DEVICE_DMA_DESC Device mode scatter dma descriptor strusture
- \ingroup IFXUSB_CSR_DEFINITION
- \brief Bit-mapped structure to DMA descriptor
- */
-
-
-/*!
- \defgroup IFXUSB_CSR_HOST_GLOBAL_REG Host Mode Registers
- \ingroup IFXUSB_CSR_DEFINITION
- \brief Bit-mapped structure to access Host Mode Global Registers
- */
-
-/*!
- \defgroup IFXUSB_CSR_HOST_HC_REG Host Mode HC Registers
- \ingroup IFXUSB_CSR_DEFINITION
- \brief Bit-mapped structure to access Host Mode Host Channel Registers
- There will be one set of endpoint registers per host channel
- implemented.
- These registers are visible only in Host mode and must not be
- accessed in Device mode, as the results are unknown.
- */
-
-/*!
- \defgroup IFXUSB_CSR_PWR_CLK_GATING_REG Power and Clock Gating Control Register
- \ingroup IFXUSB_CSR_DEFINITION
- \brief Bit-mapped structure to Power and Clock Gating Control Register
- */
-
-
-
-
-
-
-
-
-/*!
- \defgroup IFXUSB_CSR_CORE_GLOBAL_REG Core Global Registers
- \ingroup IFXUSB_CSR_DEFINITION
- \brief Bit-mapped structure to access Core Global Registers
- */
-/*!
- \defgroup IFXUSB_CSR_CORE_GLOBAL_REG Core Global Registers
- \ingroup IFXUSB_CSR_DEFINITION
- \brief Bit-mapped structure to access Core Global Registers
- */
-
-
-
-
-
-
-
-
-
-/*!
- \file ifxusb_regs.h
- \ingroup IFXUSB_DRIVER_V3
- \brief This file contains the data structures for accessing the IFXUSB core registers.
- */
-
-
-#ifndef __IFXUSB_REGS_H__
-#define __IFXUSB_REGS_H__
-
-/****************************************************************************/
-
-#define MAX_PERIO_FIFOS 15 /** Maximum number of Periodic FIFOs */
-#define MAX_TX_FIFOS 15 /** Maximum number of Periodic FIFOs */
-#define MAX_EPS_CHANNELS 16 /** Maximum number of Endpoints/HostChannels */
-
-/****************************************************************************/
-
-/*!
- \addtogroup IFXUSB_CSR_ACCESS_MACROS
- */
-/*@{*/
-
-//#define RecordRegRW
-
-/*!
- \fn static __inline__ uint32_t ifxusb_rreg( volatile uint32_t *_reg)
- \brief Reads the content of a register.
- \param _reg address of register to read.
- \return contents of the register.
- */
-static __inline__ uint32_t ifxusb_rreg( volatile uint32_t *_reg)
-{
- #ifdef RecordRegRW
- uint32_t r;
- r=*(_reg);
- return (r);
- #else
- return (*(_reg));
- #endif
-};
-
-
-/*!
- \fn static __inline__ void ifxusb_wreg( volatile uint32_t *_reg, const uint32_t _value)
- \brief Writes a register with a 32 bit value.
- \param _reg address of register to write.
- \param _value value to write to _reg.
- */
-static __inline__ void ifxusb_wreg( volatile uint32_t *_reg, const uint32_t _value)
-{
- #ifdef RecordRegRW
- printk(KERN_INFO "[W %p<-%08X]\n",_reg,_value);
- #else
- *(_reg)=_value;
- #endif
-};
-
-/*!
- \fn static __inline__ void ifxusb_mreg( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
- \brief Modifies bit values in a register. Using the
- algorithm: (reg_contents & ~clear_mask) | set_mask.
- \param _reg address of register to modify.
- \param _clear_mask bit mask to be cleared.
- \param _set_mask bit mask to be set.
- */
-static __inline__ void ifxusb_mreg( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
-{
- uint32_t v;
- #ifdef RecordRegRW
- uint32_t r;
- v= *(_reg);
- r=v;
- r&=(~_clear_mask);
- r|= _set_mask;
- *(_reg)=r ;
- printk(KERN_INFO "[M %p->%08X+%08X/%08X<-%08X]\n",_reg,r,_clear_mask,_set_mask,r);
- #else
- v= *(_reg);
- v&=(~_clear_mask);
- v|= _set_mask;
- *(_reg)=v ;
- #endif
-};
-
-/*@}*//*IFXUSB_CSR_ACCESS_MACROS*/
-/****************************************************************************/
-
-/*!
- \addtogroup IFXUSB_CSR_CORE_GLOBAL_REG
- */
-/*@{*/
-
-/*!
- \struct ifxusb_core_global_regs
- \brief IFXUSB Core registers .
- The ifxusb_core_global_regs structure defines the size
- and relative field offsets for the Core Global registers.
- */
-typedef struct ifxusb_core_global_regs
-{
- volatile uint32_t gotgctl; /*!< 000h OTG Control and Status Register. */
- volatile uint32_t gotgint; /*!< 004h OTG Interrupt Register. */
- volatile uint32_t gahbcfg; /*!< 008h Core AHB Configuration Register. */
- volatile uint32_t gusbcfg; /*!< 00Ch Core USB Configuration Register. */
- volatile uint32_t grstctl; /*!< 010h Core Reset Register. */
- volatile uint32_t gintsts; /*!< 014h Core Interrupt Register. */
- volatile uint32_t gintmsk; /*!< 018h Core Interrupt Mask Register. */
- volatile uint32_t grxstsr; /*!< 01Ch Receive Status Queue Read Register (Read Only). */
- volatile uint32_t grxstsp; /*!< 020h Receive Status Queue Read & POP Register (Read Only). */
- volatile uint32_t grxfsiz; /*!< 024h Receive FIFO Size Register. */
- volatile uint32_t gnptxfsiz; /*!< 028h Non Periodic Transmit FIFO Size Register. */
- volatile uint32_t gnptxsts; /*!< 02Ch Non Periodic Transmit FIFO/Queue Status Register (Read Only). */
- volatile uint32_t gi2cctl; /*!< 030h I2C Access Register. */
- volatile uint32_t gpvndctl; /*!< 034h PHY Vendor Control Register. */
- volatile uint32_t ggpio; /*!< 038h General Purpose Input/Output Register. */
- volatile uint32_t guid; /*!< 03Ch User ID Register. */
- volatile uint32_t gsnpsid; /*!< 040h Synopsys ID Register (Read Only). */
- volatile uint32_t ghwcfg1; /*!< 044h User HW Config1 Register (Read Only). */
- volatile uint32_t ghwcfg2; /*!< 048h User HW Config2 Register (Read Only). */
- volatile uint32_t ghwcfg3; /*!< 04Ch User HW Config3 Register (Read Only). */
- volatile uint32_t ghwcfg4; /*!< 050h User HW Config4 Register (Read Only). */
- volatile uint32_t reserved[43]; /*!< 054h Reserved 054h-0FFh */
- volatile uint32_t hptxfsiz; /*!< 100h Host Periodic Transmit FIFO Size Register. */
- volatile uint32_t dptxfsiz_dieptxf[15];/*!< 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15.
- Device Periodic Transmit FIFO#n Register if dedicated
- fifos are disabled, otherwise Device Transmit FIFO#n
- Register.
- */
-} ifxusb_core_global_regs_t;
-
-/*!
- \brief Bits of the Core OTG Control and Status Register (GOTGCTL).
- */
-typedef union gotgctl_data
-{
- uint32_t d32;
- struct{
- unsigned reserved21_31 : 11;
- unsigned currmod : 1 ; /*!< 20 */
- unsigned bsesvld : 1 ; /*!< 19 */
- unsigned asesvld : 1 ; /*!< 18 */
- unsigned reserved17 : 1 ;
- unsigned conidsts : 1 ; /*!< 16 */
- unsigned reserved12_15 : 4 ;
- unsigned devhnpen : 1 ; /*!< 11 */
- unsigned hstsethnpen : 1 ; /*!< 10 */
- unsigned hnpreq : 1 ; /*!< 09 */
- unsigned hstnegscs : 1 ; /*!< 08 */
- unsigned reserved2_7 : 6 ;
- unsigned sesreq : 1 ; /*!< 01 */
- unsigned sesreqscs : 1 ; /*!< 00 */
- } b;
-} gotgctl_data_t;
-
-/*!
- \brief Bit fields of the Core OTG Interrupt Register (GOTGINT).
- */
-typedef union gotgint_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved31_20 : 12;
- unsigned debdone : 1 ; /*!< 19 Debounce Done */
- unsigned adevtoutchng : 1 ; /*!< 18 A-Device Timeout Change */
- unsigned hstnegdet : 1 ; /*!< 17 Host Negotiation Detected */
- unsigned reserver10_16 : 7 ;
- unsigned hstnegsucstschng : 1 ; /*!< 09 Host Negotiation Success Status Change */
- unsigned sesreqsucstschng : 1 ; /*!< 08 Session Request Success Status Change */
- unsigned reserved3_7 : 5 ;
- unsigned sesenddet : 1 ; /*!< 02 Session End Detected */
- unsigned reserved0_1 : 2 ;
- } b;
-} gotgint_data_t;
-
-/*!
- \brief Bit fields of the Core AHB Configuration Register (GAHBCFG).
- */
-typedef union gahbcfg_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved9_31 : 23;
- unsigned ptxfemplvl : 1 ; /*!< 08 Periodic FIFO empty level trigger condition*/
- unsigned nptxfemplvl : 1 ; /*!< 07 Non-Periodic FIFO empty level trigger condition*/
- #define IFXUSB_GAHBCFG_TXFEMPTYLVL_EMPTY 1
- #define IFXUSB_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
- unsigned reserved : 1 ;
- unsigned dmaenable : 1 ; /*!< 05 DMA enable*/
- #define IFXUSB_GAHBCFG_DMAENABLE 1
- unsigned hburstlen : 4 ; /*!< 01-04 DMA Burst-length*/
- #define IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE 0
- #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR 1
- #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4 3
- #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8 5
- #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16 7
- unsigned glblintrmsk : 1 ; /*!< 00 USB Global Interrupt Enable */
- #define IFXUSB_GAHBCFG_GLBINT_ENABLE 1
- } b;
-} gahbcfg_data_t;
-
-/*!
- \brief Bit fields of the Core USB Configuration Register (GUSBCFG).
-*/
-typedef union gusbcfg_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved31 : 1;
- unsigned ForceDevMode : 1; /*!< 30 Force Device Mode */
- unsigned ForceHstMode : 1; /*!< 29 Force Host Mode */
- unsigned TxEndDelay : 1; /*!< 28 Tx End Delay */
- unsigned reserved2723 : 5;
- unsigned term_sel_dl_pulse : 1; /*!< 22 TermSel DLine Pulsing Selection */
- unsigned reserved2117 : 5;
- unsigned otgutmifssel : 1; /*!< 16 UTMIFS Select */
- unsigned phylpwrclksel : 1; /*!< 15 PHY Low-Power Clock Select */
- unsigned reserved14 : 1;
- unsigned usbtrdtim : 4; /*!< 13-10 USB Turnaround Time */
- unsigned hnpcap : 1; /*!< 09 HNP-Capable */
- unsigned srpcap : 1; /*!< 08 SRP-Capable */
- unsigned reserved07 : 1;
- unsigned physel : 1; /*!< 06 USB 2.0 High-Speed PHY or
- USB 1.1 Full-Speed Serial
- Transceiver Select */
- unsigned fsintf : 1; /*!< 05 Full-Speed Serial Interface Select */
- unsigned ulpi_utmi_sel : 1; /*!< 04 ULPI or UTMI+ Select */
- unsigned phyif : 1; /*!< 03 PHY Interface */
- unsigned toutcal : 3; /*!< 00-02 HS/FS Timeout Calibration */
- }b;
-} gusbcfg_data_t;
-
-/*!
- \brief Bit fields of the Core Reset Register (GRSTCTL).
- */
-typedef union grstctl_data
-{
- uint32_t d32;
- struct
- {
- unsigned ahbidle : 1; /*!< 31 AHB Master Idle. Indicates the AHB Master State
- Machine is in IDLE condition. */
- unsigned dmareq : 1; /*!< 30 DMA Request Signal. Indicated DMA request is in
- probress. Used for debug purpose. */
- unsigned reserved11_29 :19;
- unsigned txfnum : 5; /*!< 10-06 TxFIFO Number (TxFNum) to be flushed.
- 0x00: Non Periodic TxFIFO Flush or TxFIFO 0
- 0x01-0x0F: Periodic TxFIFO Flush or TxFIFO n
- 0x10: Flush all TxFIFO
- */
- unsigned txfflsh : 1; /*!< 05 TxFIFO Flush */
- unsigned rxfflsh : 1; /*!< 04 RxFIFO Flush */
- unsigned intknqflsh : 1; /*!< 03 In Token Sequence Learning Queue Flush (Device Only) */
- unsigned hstfrm : 1; /*!< 02 Host Frame Counter Reset (Host Only) */
- unsigned hsftrst : 1; /*!< 01 Hclk Soft Reset */
-
- unsigned csftrst : 1; /*!< 00 Core Soft Reset
- The application can flush the control logic in the
- entire core using this bit. This bit resets the
- pipelines in the AHB Clock domain as well as the
- PHY Clock domain.
- The state machines are reset to an IDLE state, the
- control bits in the CSRs are cleared, all the
- transmit FIFOs and the receive FIFO are flushed.
- The status mask bits that control the generation of
- the interrupt, are cleared, to clear the
- interrupt. The interrupt status bits are not
- cleared, so the application can get the status of
- any events that occurred in the core after it has
- set this bit.
- Any transactions on the AHB are terminated as soon
- as possible following the protocol. Any
- transactions on the USB are terminated immediately.
- The configuration settings in the CSRs are
- unchanged, so the software doesn't have to
- reprogram these registers (Device
- Configuration/Host Configuration/Core System
- Configuration/Core PHY Configuration).
- The application can write to this bit, any time it
- wants to reset the core. This is a self clearing
- bit and the core clears this bit after all the
- necessary logic is reset in the core, which may
- take several clocks, depending on the current state
- of the core.
- */
- }b;
-} grstctl_t;
-
-/*!
- \brief Bit fields of the Core Interrupt Mask Register (GINTMSK) and
- Core Interrupt Register (GINTSTS).
- */
-typedef union gint_data
-{
- uint32_t d32;
- #define IFXUSB_SOF_INTR_MASK 0x0008
- struct
- {
- unsigned wkupintr : 1; /*!< 31 Resume/Remote Wakeup Detected Interrupt */
- unsigned sessreqintr : 1; /*!< 30 Session Request/New Session Detected Interrupt */
- unsigned disconnect : 1; /*!< 29 Disconnect Detected Interrupt */
- unsigned conidstschng : 1; /*!< 28 Connector ID Status Change */
- unsigned reserved27 : 1;
- unsigned ptxfempty : 1; /*!< 26 Periodic TxFIFO Empty */
- unsigned hcintr : 1; /*!< 25 Host Channels Interrupt */
- unsigned portintr : 1; /*!< 24 Host Port Interrupt */
- unsigned reserved23 : 1;
- unsigned fetsuspmsk : 1; /*!< 22 Data Fetch Suspended */
- unsigned incomplisoout : 1; /*!< 21 Incomplete IsochronousOUT/Period Transfer */
- unsigned incomplisoin : 1; /*!< 20 Incomplete Isochronous IN Transfer */
- unsigned outepintr : 1; /*!< 19 OUT Endpoints Interrupt */
- unsigned inepintr : 1; /*!< 18 IN Endpoints Interrupt */
- unsigned epmismatch : 1; /*!< 17 Endpoint Mismatch Interrupt */
- unsigned reserved16 : 1;
- unsigned eopframe : 1; /*!< 15 End of Periodic Frame Interrupt */
- unsigned isooutdrop : 1; /*!< 14 Isochronous OUT Packet Dropped Interrupt */
- unsigned enumdone : 1; /*!< 13 Enumeration Done */
- unsigned usbreset : 1; /*!< 12 USB Reset */
- unsigned usbsuspend : 1; /*!< 11 USB Suspend */
- unsigned erlysuspend : 1; /*!< 10 Early Suspend */
- unsigned i2cintr : 1; /*!< 09 I2C Interrupt */
- unsigned reserved8 : 1;
- unsigned goutnakeff : 1; /*!< 07 Global OUT NAK Effective */
- unsigned ginnakeff : 1; /*!< 06 Global Non-periodic IN NAK Effective */
- unsigned nptxfempty : 1; /*!< 05 Non-periodic TxFIFO Empty */
- unsigned rxstsqlvl : 1; /*!< 04 Receive FIFO Non-Empty */
- unsigned sofintr : 1; /*!< 03 Start of (u)Frame */
- unsigned otgintr : 1; /*!< 02 OTG Interrupt */
- unsigned modemismatch : 1; /*!< 01 Mode Mismatch Interrupt */
- unsigned reserved0 : 1;
- } b;
-} gint_data_t;
-
-/*!
- \brief Bit fields in the Receive Status Read and Pop Registers (GRXSTSR, GRXSTSP)
- */
-typedef union grxsts_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved : 7;
- unsigned fn : 4; /*!< 24-21 Frame Number */
- unsigned pktsts : 4; /*!< 20-17 Packet Status */
- #define IFXUSB_DSTS_DATA_UPDT 0x2 // OUT Data Packet
- #define IFXUSB_DSTS_XFER_COMP 0x3 // OUT Data Transfer Complete
- #define IFXUSB_DSTS_GOUT_NAK 0x1 // Global OUT NAK
- #define IFXUSB_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
- #define IFXUSB_DSTS_SETUP_UPDT 0x6 // SETUP Packet
- unsigned dpid : 2; /*!< 16-15 Data PID */
- unsigned bcnt :11; /*!< 14-04 Byte Count */
- unsigned epnum : 4; /*!< 03-00 Endpoint Number */
- } db;
- struct
- {
- unsigned reserved :11;
- unsigned pktsts : 4; /*!< 20-17 Packet Status */
- #define IFXUSB_HSTS_DATA_UPDT 0x2 // OUT Data Packet
- #define IFXUSB_HSTS_XFER_COMP 0x3 // OUT Data Transfer Complete
- #define IFXUSB_HSTS_DATA_TOGGLE_ERR 0x5 // DATA TOGGLE Error
- #define IFXUSB_HSTS_CH_HALTED 0x7 // Channel Halted
- unsigned dpid : 2; /*!< 16-15 Data PID */
- unsigned bcnt :11; /*!< 14-04 Byte Count */
- unsigned chnum : 4; /*!< 03-00 Channel Number */
- } hb;
-} grxsts_data_t;
-
-/*!
- \brief Bit fields in the FIFO Size Registers (HPTXFSIZ, GNPTXFSIZ, DPTXFSIZn).
- */
-typedef union fifosize_data
-{
- uint32_t d32;
- struct
- {
- unsigned depth : 16; /*!< 31-16 TxFIFO Depth (in DWord)*/
- unsigned startaddr : 16; /*!< 15-00 RAM Starting address */
- } b;
-} fifosize_data_t;
-
-/*!
- \brief Bit fields in the Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS).
- */
-
-typedef union gnptxsts_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved : 1;
- unsigned nptxqtop_chnep : 4; /*!< 30-27 Channel/EP Number of top of the Non-Periodic
- Transmit Request Queue
- */
- unsigned nptxqtop_token : 2; /*!< 26-25 Token Type top of the Non-Periodic
- Transmit Request Queue
- 0 - IN/OUT
- 1 - Zero Length OUT
- 2 - PING/Complete Split
- 3 - Channel Halt
- */
- unsigned nptxqtop_terminate : 1; /*!< 24 Terminate (Last entry for the selected
- channel/EP)*/
- unsigned nptxqspcavail : 8; /*!< 23-16 Transmit Request Queue Space Available */
- unsigned nptxfspcavail :16; /*!< 15-00 TxFIFO Space Avail (in DWord)*/
- }b;
-} gnptxsts_data_t;
-
-
-/*!
- \brief Bit fields in the Transmit FIFO Status Register (DTXFSTS).
- */
-typedef union dtxfsts_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved : 16;
- unsigned txfspcavail : 16; /*!< 15-00 TxFIFO Space Avail (in DWord)*/
- }b;
-} dtxfsts_data_t;
-
-
-/*!
- \brief Bit fields in the I2C Control Register (I2CCTL).
- */
-typedef union gi2cctl_data
-{
- uint32_t d32;
- struct
- {
- unsigned bsydne : 1; /*!< 31 I2C Busy/Done*/
- unsigned rw : 1; /*!< 30 Read/Write Indicator */
- unsigned reserved : 2;
- unsigned i2cdevaddr : 2; /*!< 27-26 I2C Device Address */
- unsigned i2csuspctl : 1; /*!< 25 I2C Suspend Control */
- unsigned ack : 1; /*!< 24 I2C ACK */
- unsigned i2cen : 1; /*!< 23 I2C Enable */
- unsigned addr : 7; /*!< 22-16 I2C Address */
- unsigned regaddr : 8; /*!< 15-08 I2C Register Addr */
- unsigned rwdata : 8; /*!< I2C Read/Write Data */
- } b;
-} gi2cctl_data_t;
-
-
-/*!
- \brief Bit fields in the User HW Config1 Register.
- */
-typedef union hwcfg1_data
-{
- uint32_t d32;
- struct
- {
- unsigned ep_dir15 : 2; /*!< Direction of each EP
- 0: BIDIR (IN and OUT) endpoint
- 1: IN endpoint
- 2: OUT endpoint
- 3: Reserved
- */
- unsigned ep_dir14 : 2;
- unsigned ep_dir13 : 2;
- unsigned ep_dir12 : 2;
- unsigned ep_dir11 : 2;
- unsigned ep_dir10 : 2;
- unsigned ep_dir09 : 2;
- unsigned ep_dir08 : 2;
- unsigned ep_dir07 : 2;
- unsigned ep_dir06 : 2;
- unsigned ep_dir05 : 2;
- unsigned ep_dir04 : 2;
- unsigned ep_dir03 : 2;
- unsigned ep_dir02 : 2;
- unsigned ep_dir01 : 2;
- unsigned ep_dir00 : 2;
- }b;
-} hwcfg1_data_t;
-
-/*!
- \brief Bit fields in the User HW Config2 Register.
- */
-typedef union hwcfg2_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved31 : 1;
- unsigned dev_token_q_depth : 5; /*!< 30-26 Device Mode IN Token Sequence Learning Queue Depth */
- unsigned host_perio_tx_q_depth : 2; /*!< 25-24 Host Mode Periodic Request Queue Depth */
- unsigned nonperio_tx_q_depth : 2; /*!< 23-22 Non-periodic Request Queue Depth */
- unsigned rx_status_q_depth : 2; /*!< 21-20 Multi Processor Interrupt Enabled */
- unsigned dynamic_fifo : 1; /*!< 19 Dynamic FIFO Sizing Enabled */
- unsigned perio_ep_supported : 1; /*!< 18 Periodic OUT Channels Supported in Host Mode */
- unsigned num_host_chan : 4; /*!< 17-14 Number of Host Channels */
- unsigned num_dev_ep : 4; /*!< 13-10 Number of Device Endpoints */
- unsigned fs_phy_type : 2; /*!< 09-08 Full-Speed PHY Interface Type */
- #define IFXUSB_HWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0
- #define IFXUSB_HWCFG2_FS_PHY_TYPE_DEDICATE 1
- #define IFXUSB_HWCFG2_FS_PHY_TYPE_UTMI 2
- #define IFXUSB_HWCFG2_FS_PHY_TYPE_ULPI 3
- unsigned hs_phy_type : 2; /*!< 07-06 High-Speed PHY Interface Type */
- #define IFXUSB_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
- #define IFXUSB_HWCFG2_HS_PHY_TYPE_UTMI 1
- #define IFXUSB_HWCFG2_HS_PHY_TYPE_ULPI 2
- #define IFXUSB_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
- unsigned point2point : 1; /*!< 05 Point-to-Point */
- unsigned architecture : 2; /*!< 04-03 Architecture */
- #define IFXUSB_HWCFG2_ARCH_SLAVE_ONLY 0
- #define IFXUSB_HWCFG2_ARCH_EXT_DMA 1
- #define IFXUSB_HWCFG2_ARCH_INT_DMA 2
- unsigned op_mode : 3; /*!< 02-00 Mode of Operation */
- #define IFXUSB_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
- #define IFXUSB_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
- #define IFXUSB_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
- #define IFXUSB_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
- #define IFXUSB_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
- #define IFXUSB_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
- #define IFXUSB_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
- } b;
-} hwcfg2_data_t;
-
-/*!
- \brief Bit fields in the User HW Config3 Register.
- */
-typedef union hwcfg3_data
-{
- uint32_t d32;
- struct
- {
- unsigned dfifo_depth :16; /*!< 31-16 DFIFO Depth */
- unsigned reserved15_12 : 4;
- unsigned synch_reset_type : 1; /*!< 11 Reset Style for Clocked always Blocks in RTL */
- unsigned optional_features : 1; /*!< 10 Optional Features Removed */
- unsigned vendor_ctrl_if : 1; /*!< 09 Vendor Control Interface Support */
- unsigned i2c : 1; /*!< 08 I2C Selection */
- unsigned otg_func : 1; /*!< 07 OTG Function Enabled */
- unsigned packet_size_cntr_width : 3; /*!< 06-04 Width of Packet Size Counters */
- unsigned xfer_size_cntr_width : 4; /*!< 03-00 Width of Transfer Size Counters */
- } b;
-} hwcfg3_data_t;
-
-/*!
- \brief Bit fields in the User HW Config4
- * Register. Read the register into the <i>d32</i> element then read
- * out the bits using the <i>b</i>it elements.
- */
-typedef union hwcfg4_data
-{
- uint32_t d32;
- struct
- {
- unsigned desc_dma_dyn : 1; /*!< 31 Scatter/Gather DMA */
- unsigned desc_dma : 1; /*!< 30 Scatter/Gather DMA configuration */
- unsigned num_in_eps : 4; /*!< 29-26 Number of Device Mode IN Endpoints Including Control Endpoints */
- unsigned ded_fifo_en : 1; /*!< 25 Enable Dedicated Transmit FIFO for device IN Endpoints */
- unsigned session_end_filt_en : 1; /*!< 24 session_end Filter Enabled */
- unsigned b_valid_filt_en : 1; /*!< 23 b_valid Filter Enabled */
- unsigned a_valid_filt_en : 1; /*!< 22 a_valid Filter Enabled */
- unsigned vbus_valid_filt_en : 1; /*!< 21 vbus_valid Filter Enabled */
- unsigned iddig_filt_en : 1; /*!< 20 iddig Filter Enable */
- unsigned num_dev_mode_ctrl_ep : 4; /*!< 19-16 Number of Device Mode Control Endpoints in Addition to Endpoint 0 */
- unsigned utmi_phy_data_width : 2; /*!< 15-14 UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width */
- unsigned reserved13_06 : 8;
- unsigned min_ahb_freq : 1; /*!< 05 Minimum AHB Frequency Less Than 60 MHz */
- unsigned power_optimiz : 1; /*!< 04 Enable Power Optimization? */
- unsigned num_dev_perio_in_ep : 4; /*!< 03-00 Number of Device Mode Periodic IN Endpoints */
- } b;
-} hwcfg4_data_t;
-
-/*@}*//*IFXUSB_CSR_CORE_GLOBAL_REG*/
-
-/****************************************************************************/
-/*!
- \addtogroup IFXUSB_CSR_DEVICE_GLOBAL_REG
- */
-/*@{*/
-
-/*!
- \struct ifxusb_dev_global_regs
- \brief IFXUSB Device Mode Global registers. Offsets 800h-BFFh
- The ifxusb_dev_global_regs structure defines the size
- and relative field offsets for the Device Global registers.
- These registers are visible only in Device mode and must not be
- accessed in Host mode, as the results are unknown.
- */
-typedef struct ifxusb_dev_global_regs
-{
- volatile uint32_t dcfg; /*!< 800h Device Configuration Register. */
- volatile uint32_t dctl; /*!< 804h Device Control Register. */
- volatile uint32_t dsts; /*!< 808h Device Status Register (Read Only). */
- uint32_t unused;
- volatile uint32_t diepmsk; /*!< 810h Device IN Endpoint Common Interrupt Mask Register. */
- volatile uint32_t doepmsk; /*!< 814h Device OUT Endpoint Common Interrupt Mask Register. */
- volatile uint32_t daint; /*!< 818h Device All Endpoints Interrupt Register. */
- volatile uint32_t daintmsk; /*!< 81Ch Device All Endpoints Interrupt Mask Register. */
- volatile uint32_t dtknqr1; /*!< 820h Device IN Token Queue Read Register-1 (Read Only). */
- volatile uint32_t dtknqr2; /*!< 824h Device IN Token Queue Read Register-2 (Read Only). */
- volatile uint32_t dvbusdis; /*!< 828h Device VBUS discharge Register.*/
- volatile uint32_t dvbuspulse; /*!< 82Ch Device VBUS Pulse Register. */
- volatile uint32_t dtknqr3_dthrctl; /*!< 830h Device IN Token Queue Read Register-3 (Read Only).
- Device Thresholding control register (Read/Write)
- */
- volatile uint32_t dtknqr4_fifoemptymsk; /*!< 834h Device IN Token Queue Read Register-4 (Read Only).
- Device IN EPs empty Inr. Mask Register (Read/Write)
- */
-} ifxusb_device_global_regs_t;
-
-/*!
- \brief Bit fields in the Device Configuration Register.
- */
-
-typedef union dcfg_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved31_26 : 6;
- unsigned perschintvl : 2; /*!< 25-24 Periodic Scheduling Interval */
- unsigned descdma : 1; /*!< 23 Enable Descriptor DMA in Device mode */
- unsigned epmscnt : 5; /*!< 22-18 In Endpoint Mis-match count */
- unsigned reserved13_17 : 5;
- unsigned perfrint : 2; /*!< 12-11 Periodic Frame Interval */
- #define IFXUSB_DCFG_FRAME_INTERVAL_80 0
- #define IFXUSB_DCFG_FRAME_INTERVAL_85 1
- #define IFXUSB_DCFG_FRAME_INTERVAL_90 2
- #define IFXUSB_DCFG_FRAME_INTERVAL_95 3
- unsigned devaddr : 7; /*!< 10-04 Device Addresses */
- unsigned reserved3 : 1;
- unsigned nzstsouthshk : 1; /*!< 02 Non Zero Length Status OUT Handshake */
- #define IFXUSB_DCFG_SEND_STALL 1
- unsigned devspd : 2; /*!< 01-00 Device Speed */
- } b;
-} dcfg_data_t;
-
-/*!
- \brief Bit fields in the Device Control Register.
- */
-typedef union dctl_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved16_31 :16;
- unsigned ifrmnum : 1; /*!< 15 Ignore Frame Number for ISOC EPs */
- unsigned gmc : 2; /*!< 14-13 Global Multi Count */
- unsigned gcontbna : 1; /*!< 12 Global Continue on BNA */
- unsigned pwronprgdone : 1; /*!< 11 Power-On Programming Done */
- unsigned cgoutnak : 1; /*!< 10 Clear Global OUT NAK */
- unsigned sgoutnak : 1; /*!< 09 Set Global OUT NAK */
- unsigned cgnpinnak : 1; /*!< 08 Clear Global Non-Periodic IN NAK */
- unsigned sgnpinnak : 1; /*!< 07 Set Global Non-Periodic IN NAK */
- unsigned tstctl : 3; /*!< 06-04 Test Control */
- unsigned goutnaksts : 1; /*!< 03 Global OUT NAK Status */
- unsigned gnpinnaksts : 1; /*!< 02 Global Non-Periodic IN NAK Status */
- unsigned sftdiscon : 1; /*!< 01 Soft Disconnect */
- unsigned rmtwkupsig : 1; /*!< 00 Remote Wakeup */
- } b;
-} dctl_data_t;
-
-
-/*!
- \brief Bit fields in the Device Status Register.
- */
-typedef union dsts_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved22_31 :10;
- unsigned soffn :14; /*!< 21-08 Frame or Microframe Number of the received SOF */
- unsigned reserved4_7 : 4;
- unsigned errticerr : 1; /*!< 03 Erratic Error */
- unsigned enumspd : 2; /*!< 02-01 Enumerated Speed */
- #define IFXUSB_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
- #define IFXUSB_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
- #define IFXUSB_DSTS_ENUMSPD_LS_PHY_6MHZ 2
- #define IFXUSB_DSTS_ENUMSPD_FS_PHY_48MHZ 3
- unsigned suspsts : 1; /*!< 00 Suspend Status */
- } b;
-} dsts_data_t;
-
-/*!
- \brief Bit fields in the Device IN EP Interrupt Register
- and the Device IN EP Common Mask Register.
- */
-typedef union diepint_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved14_31 :18;
- unsigned nakmsk : 1; /*!< 13 NAK interrupt Mask */
- unsigned reserved10_12 : 3;
- unsigned bna : 1; /*!< 09 BNA Interrupt mask */
- unsigned txfifoundrn : 1; /*!< 08 Fifo Underrun Mask */
- unsigned emptyintr : 1; /*!< 07 IN Endpoint HAK Effective mask */
- unsigned inepnakeff : 1; /*!< 06 IN Endpoint HAK Effective mask */
- unsigned intknepmis : 1; /*!< 05 IN Token Received with EP mismatch mask */
- unsigned intktxfemp : 1; /*!< 04 IN Token received with TxF Empty mask */
- unsigned timeout : 1; /*!< 03 TimeOUT Handshake mask (non-ISOC EPs) */
- unsigned ahberr : 1; /*!< 02 AHB Error mask */
- unsigned epdisabled : 1; /*!< 01 Endpoint disable mask */
- unsigned xfercompl : 1; /*!< 00 Transfer complete mask */
- } b;
-} diepint_data_t;
-
-
-/*!
- \brief Bit fields in the Device OUT EP Interrupt Register and
- Device OUT EP Common Interrupt Mask Register.
- */
-typedef union doepint_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved15_31 :17;
- unsigned nyetmsk : 1; /*!< 14 NYET Interrupt */
- unsigned nakmsk : 1; /*!< 13 NAK Interrupt */
- unsigned bbleerrmsk : 1; /*!< 12 Babble Interrupt */
- unsigned reserved10_11 : 2;
- unsigned bna : 1; /*!< 09 BNA Interrupt */
- unsigned outpkterr : 1; /*!< 08 OUT packet Error */
- unsigned reserved07 : 1;
- unsigned back2backsetup : 1; /*!< 06 Back-to-Back SETUP Packets Received */
- unsigned stsphsercvd : 1; /*!< 05 */
- unsigned outtknepdis : 1; /*!< 04 OUT Token Received when Endpoint Disabled */
- unsigned setup : 1; /*!< 03 Setup Phase Done (contorl EPs) */
- unsigned ahberr : 1; /*!< 02 AHB Error */
- unsigned epdisabled : 1; /*!< 01 Endpoint disable */
- unsigned xfercompl : 1; /*!< 00 Transfer complete */
- } b;
-} doepint_data_t;
-
-
-/*!
- \brief Bit fields in the Device All EP Interrupt Registers.
- */
-typedef union daint_data
-{
- uint32_t d32;
- struct
- {
- unsigned out : 16; /*!< 31-16 OUT Endpoint bits */
- unsigned in : 16; /*!< 15-00 IN Endpoint bits */
- } eps;
- struct
- {
- /** OUT Endpoint bits */
- unsigned outep15 : 1;
- unsigned outep14 : 1;
- unsigned outep13 : 1;
- unsigned outep12 : 1;
- unsigned outep11 : 1;
- unsigned outep10 : 1;
- unsigned outep09 : 1;
- unsigned outep08 : 1;
- unsigned outep07 : 1;
- unsigned outep06 : 1;
- unsigned outep05 : 1;
- unsigned outep04 : 1;
- unsigned outep03 : 1;
- unsigned outep02 : 1;
- unsigned outep01 : 1;
- unsigned outep00 : 1;
- /** IN Endpoint bits */
- unsigned inep15 : 1;
- unsigned inep14 : 1;
- unsigned inep13 : 1;
- unsigned inep12 : 1;
- unsigned inep11 : 1;
- unsigned inep10 : 1;
- unsigned inep09 : 1;
- unsigned inep08 : 1;
- unsigned inep07 : 1;
- unsigned inep06 : 1;
- unsigned inep05 : 1;
- unsigned inep04 : 1;
- unsigned inep03 : 1;
- unsigned inep02 : 1;
- unsigned inep01 : 1;
- unsigned inep00 : 1;
- } ep;
-} daint_data_t;
-
-
-/*!
- \brief Bit fields in the Device IN Token Queue Read Registers.
- */
-typedef union dtknq1_data
-{
- uint32_t d32;
- struct
- {
- unsigned epnums0_5 :24; /*!< 31-08 EP Numbers of IN Tokens 0 ... 4 */
- unsigned wrap_bit : 1; /*!< 07 write pointer has wrapped */
- unsigned reserved05_06 : 2;
- unsigned intknwptr : 5; /*!< 04-00 In Token Queue Write Pointer */
- }b;
-} dtknq1_data_t;
-
-
-/*!
- \brief Bit fields in Threshold control Register
- */
-typedef union dthrctl_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved26_31 : 6;
- unsigned rx_thr_len : 9; /*!< 25-17 Rx Thr. Length */
- unsigned rx_thr_en : 1; /*!< 16 Rx Thr. Enable */
- unsigned reserved11_15 : 5;
- unsigned tx_thr_len : 9; /*!< 10-02 Tx Thr. Length */
- unsigned iso_thr_en : 1; /*!< 01 ISO Tx Thr. Enable */
- unsigned non_iso_thr_en : 1; /*!< 00 non ISO Tx Thr. Enable */
- } b;
-} dthrctl_data_t;
-
-/*@}*//*IFXUSB_CSR_DEVICE_GLOBAL_REG*/
-
-/****************************************************************************/
-
-/*!
- \addtogroup IFXUSB_CSR_DEVICE_EP_REG
- */
-/*@{*/
-
-/*!
- \struct ifxusb_dev_in_ep_regs
- \brief Device Logical IN Endpoint-Specific Registers.
- There will be one set of endpoint registers per logical endpoint
- implemented.
- each EP's IN EP Register are offset at :
- 900h + * (ep_num * 20h)
- */
-
-typedef struct ifxusb_dev_in_ep_regs
-{
- volatile uint32_t diepctl; /*!< 00h: Endpoint Control Register */
- uint32_t reserved04; /*!< 04h: */
- volatile uint32_t diepint; /*!< 08h: Endpoint Interrupt Register */
- uint32_t reserved0C; /*!< 0Ch: */
- volatile uint32_t dieptsiz; /*!< 10h: Endpoint Transfer Size Register.*/
- volatile uint32_t diepdma; /*!< 14h: Endpoint DMA Address Register. */
- volatile uint32_t dtxfsts; /*!< 18h: Endpoint Transmit FIFO Status Register. */
- volatile uint32_t diepdmab; /*!< 1Ch: Endpoint DMA Buffer Register. */
-} ifxusb_dev_in_ep_regs_t;
-
-/*!
- \brief Device Logical OUT Endpoint-Specific Registers.
- There will be one set of endpoint registers per logical endpoint
- implemented.
- each EP's OUT EP Register are offset at :
- B00h + * (ep_num * 20h) + 00h
- */
-typedef struct ifxusb_dev_out_ep_regs
-{
- volatile uint32_t doepctl; /*!< 00h: Endpoint Control Register */
- volatile uint32_t doepfn; /*!< 04h: Endpoint Frame number Register */
- volatile uint32_t doepint; /*!< 08h: Endpoint Interrupt Register */
- uint32_t reserved0C; /*!< 0Ch: */
- volatile uint32_t doeptsiz; /*!< 10h: Endpoint Transfer Size Register.*/
- volatile uint32_t doepdma; /*!< 14h: Endpoint DMA Address Register. */
- uint32_t reserved18; /*!< 18h: */
- volatile uint32_t doepdmab; /*!< 1Ch: Endpoint DMA Buffer Register. */
-} ifxusb_dev_out_ep_regs_t;
-
-
-/*!
- \brief Bit fields in the Device EP Control
- Register.
- */
-typedef union depctl_data
-{
- uint32_t d32;
- struct
- {
- unsigned epena : 1; /*!< 31 Endpoint Enable */
- unsigned epdis : 1; /*!< 30 Endpoint Disable */
- unsigned setd1pid : 1; /*!< 29 Set DATA1 PID (INTR/Bulk IN and OUT endpoints) */
- unsigned setd0pid : 1; /*!< 28 Set DATA0 PID (INTR/Bulk IN and OUT endpoints) */
- unsigned snak : 1; /*!< 27 Set NAK */
- unsigned cnak : 1; /*!< 26 Clear NAK */
- unsigned txfnum : 4; /*!< 25-22 Tx Fifo Number */
- unsigned stall : 1; /*!< 21 Stall Handshake */
- unsigned snp : 1; /*!< 20 Snoop Mode */
- unsigned eptype : 2; /*!< 19-18 Endpoint Type
- 0: Control
- 1: Isochronous
- 2: Bulk
- 3: Interrupt
- */
- unsigned naksts : 1; /*!< 17 NAK Status */
- unsigned dpid : 1; /*!< 16 Endpoint DPID (INTR/Bulk IN and OUT endpoints) */
- unsigned usbactep : 1; /*!< 15 USB Active Endpoint */
- unsigned nextep : 4; /*!< 14-11 Next Endpoint */
- unsigned mps :11; /*!< 10-00 Maximum Packet Size */
- #define IFXUSB_DEP0CTL_MPS_64 0
- #define IFXUSB_DEP0CTL_MPS_32 1
- #define IFXUSB_DEP0CTL_MPS_16 2
- #define IFXUSB_DEP0CTL_MPS_8 3
- } b;
-} depctl_data_t;
-
-
-/*!
- \brief Bit fields in the Device EP Transfer Size Register. (EP0 and EPn)
- */
-typedef union deptsiz_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved31 : 1;
- unsigned supcnt : 2; /*!< 30-29 Setup Packet Count */
- unsigned reserved20_28 : 9;
- unsigned pktcnt : 1; /*!< 19 Packet Count */
- unsigned reserved7_18 :12;
- unsigned xfersize : 7; /*!< 06-00 Transfer size */
- }b0;
- struct
- {
- unsigned reserved : 1;
- unsigned mc : 2; /*!< 30-29 Multi Count */
- unsigned pktcnt :10; /*!< 28-19 Packet Count */
- unsigned xfersize :19; /*!< 18-00 Transfer size */
- } b;
-} deptsiz_data_t;
-
-/*@}*//*IFXUSB_CSR_DEVICE_EP_REG*/
-/****************************************************************************/
-
-/*!
- \addtogroup IFXUSB_CSR_DEVICE_DMA_DESC
- */
-/*@{*/
-/*!
- \struct desc_sts_data
- \brief Bit fields in the DMA Descriptor status quadlet.
- */
-typedef union desc_sts_data
-{
- struct
- {
- unsigned bs : 2; /*!< 31-30 Buffer Status */
- #define BS_HOST_READY 0x0
- #define BS_DMA_BUSY 0x1
- #define BS_DMA_DONE 0x2
- #define BS_HOST_BUSY 0x3
- unsigned sts : 2; /*!< 29-28 Receive/Trasmit Status */
- #define RTS_SUCCESS 0x0
- #define RTS_BUFFLUSH 0x1
- #define RTS_RESERVED 0x2
- #define RTS_BUFERR 0x3
- unsigned l : 1; /*!< 27 Last */
- unsigned sp : 1; /*!< 26 Short Packet */
- unsigned ioc : 1; /*!< 25 Interrupt On Complete */
- unsigned sr : 1; /*!< 24 Setup Packet received */
- unsigned mtrf : 1; /*!< 23 Multiple Transfer */
- unsigned reserved16_22 : 7;
- unsigned bytes :16; /*!< 15-00 Transfer size in bytes */
- } b;
- uint32_t d32; /*!< DMA Descriptor data buffer pointer */
-} desc_sts_data_t;
-
-/*@}*//*IFXUSB_CSR_DEVICE_DMA_DESC*/
-/****************************************************************************/
-
-/*!
- \addtogroup IFXUSB_CSR_HOST_GLOBAL_REG
- */
-/*@{*/
-/*!
- \struct ifxusb_host_global_regs
- \brief IFXUSB Host Mode Global registers. Offsets 400h-7FFh
- The ifxusb_host_global_regs structure defines the size
- and relative field offsets for the Host Global registers.
- These registers are visible only in Host mode and must not be
- accessed in Device mode, as the results are unknown.
- */
-typedef struct ifxusb_host_global_regs
-{
- volatile uint32_t hcfg; /*!< 400h Host Configuration Register. */
- volatile uint32_t hfir; /*!< 404h Host Frame Interval Register. */
- volatile uint32_t hfnum; /*!< 408h Host Frame Number / Frame Remaining Register. */
- uint32_t reserved40C;
- volatile uint32_t hptxsts; /*!< 410h Host Periodic Transmit FIFO/ Queue Status Register. */
- volatile uint32_t haint; /*!< 414h Host All Channels Interrupt Register. */
- volatile uint32_t haintmsk; /*!< 418h Host All Channels Interrupt Mask Register. */
-} ifxusb_host_global_regs_t;
-
-/*!
- \brief Bit fields in the Host Configuration Register.
- */
-typedef union hcfg_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved31_03 :29;
- unsigned fslssupp : 1; /*!< 02 FS/LS Only Support */
- unsigned fslspclksel : 2; /*!< 01-00 FS/LS Phy Clock Select */
- #define IFXUSB_HCFG_30_60_MHZ 0
- #define IFXUSB_HCFG_48_MHZ 1
- #define IFXUSB_HCFG_6_MHZ 2
- } b;
-} hcfg_data_t;
-
-/*!
- \brief Bit fields in the Host Frame Interval Register.
- */
-typedef union hfir_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved : 16;
- unsigned frint : 16; /*!< 15-00 Frame Interval */
- } b;
-} hfir_data_t;
-
-/*!
- \brief Bit fields in the Host Frame Time Remaing/Number Register.
- */
-typedef union hfnum_data
-{
- uint32_t d32;
- struct
- {
- unsigned frrem : 16; /*!< 31-16 Frame Time Remaining */
- unsigned frnum : 16; /*!< 15-00 Frame Number*/
- #define IFXUSB_HFNUM_MAX_FRNUM 0x3FFF
- } b;
-} hfnum_data_t;
-
-/*!
- \brief Bit fields in the Host Periodic Transmit FIFO/Queue Status Register
- */
-typedef union hptxsts_data
-{
- /** raw register data */
- uint32_t d32;
- struct
- {
- /** Top of the Periodic Transmit Request Queue
- * - bit 24 - Terminate (last entry for the selected channel)
- */
- unsigned ptxqtop_odd : 1; /*!< 31 Top of the Periodic Transmit Request
- Queue Odd/even microframe*/
- unsigned ptxqtop_chnum : 4; /*!< 30-27 Top of the Periodic Transmit Request
- Channel Number */
- unsigned ptxqtop_token : 2; /*!< 26-25 Top of the Periodic Transmit Request
- Token Type
- 0 - Zero length
- 1 - Ping
- 2 - Disable
- */
- unsigned ptxqtop_terminate : 1; /*!< 24 Top of the Periodic Transmit Request
- Terminate (last entry for the selected channel)*/
- unsigned ptxqspcavail : 8; /*!< 23-16 Periodic Transmit Request Queue Space Available */
- unsigned ptxfspcavail :16; /*!< 15-00 Periodic Transmit Data FIFO Space Available */
- } b;
-} hptxsts_data_t;
-
-/*!
- \brief Bit fields in the Host Port Control and Status Register.
- */
-typedef union hprt0_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved19_31 :13;
- unsigned prtspd : 2; /*!< 18-17 Port Speed */
- #define IFXUSB_HPRT0_PRTSPD_HIGH_SPEED 0
- #define IFXUSB_HPRT0_PRTSPD_FULL_SPEED 1
- #define IFXUSB_HPRT0_PRTSPD_LOW_SPEED 2
- unsigned prttstctl : 4; /*!< 16-13 Port Test Control */
- unsigned prtpwr : 1; /*!< 12 Port Power */
- unsigned prtlnsts : 2; /*!< 11-10 Port Line Status */
- unsigned reserved9 : 1;
- unsigned prtrst : 1; /*!< 08 Port Reset */
- unsigned prtsusp : 1; /*!< 07 Port Suspend */
- unsigned prtres : 1; /*!< 06 Port Resume */
- unsigned prtovrcurrchng : 1; /*!< 05 Port Overcurrent Change */
- unsigned prtovrcurract : 1; /*!< 04 Port Overcurrent Active */
- unsigned prtenchng : 1; /*!< 03 Port Enable/Disable Change */
- unsigned prtena : 1; /*!< 02 Port Enable */
- unsigned prtconndet : 1; /*!< 01 Port Connect Detected */
- unsigned prtconnsts : 1; /*!< 00 Port Connect Status */
- }b;
-} hprt0_data_t;
-
-/*!
- \brief Bit fields in the Host All Interrupt Register.
- */
-typedef union haint_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved : 16;
- unsigned ch15 : 1;
- unsigned ch14 : 1;
- unsigned ch13 : 1;
- unsigned ch12 : 1;
- unsigned ch11 : 1;
- unsigned ch10 : 1;
- unsigned ch09 : 1;
- unsigned ch08 : 1;
- unsigned ch07 : 1;
- unsigned ch06 : 1;
- unsigned ch05 : 1;
- unsigned ch04 : 1;
- unsigned ch03 : 1;
- unsigned ch02 : 1;
- unsigned ch01 : 1;
- unsigned ch00 : 1;
- } b;
- struct
- {
- unsigned reserved : 16;
- unsigned chint : 16;
- } b2;
-} haint_data_t;
-/*@}*//*IFXUSB_CSR_HOST_GLOBAL_REG*/
-/****************************************************************************/
-/*!
- \addtogroup IFXUSB_CSR_HOST_HC_REG
- */
-/*@{*/
-/*!
- \brief Host Channel Specific Registers
- There will be one set of hc registers per host channelimplemented.
- each HC's Register are offset at :
- 500h + * (hc_num * 20h)
- */
-typedef struct ifxusb_hc_regs
-{
- volatile uint32_t hcchar; /*!< 00h Host Channel Characteristic Register.*/
- volatile uint32_t hcsplt; /*!< 04h Host Channel Split Control Register.*/
- volatile uint32_t hcint; /*!< 08h Host Channel Interrupt Register. */
- volatile uint32_t hcintmsk; /*!< 0Ch Host Channel Interrupt Mask Register. */
- volatile uint32_t hctsiz; /*!< 10h Host Channel Transfer Size Register. */
- volatile uint32_t hcdma; /*!< 14h Host Channel DMA Address Register. */
- uint32_t reserved[2]; /*!< 18h Reserved. */
-} ifxusb_hc_regs_t;
-
-
-/*!
- \brief Bit fields in the Host Channel Characteristics Register.
- */
-typedef union hcchar_data
-{
- uint32_t d32;
- struct
- {
- unsigned chen : 1; /*!< 31 Channel enable */
- unsigned chdis : 1; /*!< 30 Channel disable */
- unsigned oddfrm : 1; /*!< 29 Frame to transmit periodic transaction */
- unsigned devaddr : 7; /*!< 28-22 Device address */
- unsigned multicnt : 2; /*!< 21-20 Packets per frame for periodic transfers */
- unsigned eptype : 2; /*!< 19-18 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
- unsigned lspddev : 1; /*!< 17 0: Full/high speed device, 1: Low speed device */
- unsigned reserved : 1;
- unsigned epdir : 1; /*!< 15 0: OUT, 1: IN */
- unsigned epnum : 4; /*!< 14-11 Endpoint number */
- unsigned mps :11; /*!< 10-00 Maximum packet size in bytes */
- } b;
-} hcchar_data_t;
-
-/*!
- \brief Bit fields in the Host Channel Split Control Register
- */
-typedef union hcsplt_data
-{
- uint32_t d32;
- struct
- {
- unsigned spltena : 1; /*!< 31 Split Enble */
- unsigned reserved :14;
- unsigned compsplt : 1; /*!< 16 Do Complete Split */
- unsigned xactpos : 2; /*!< 15-14 Transaction Position */
- #define IFXUSB_HCSPLIT_XACTPOS_MID 0
- #define IFXUSB_HCSPLIT_XACTPOS_END 1
- #define IFXUSB_HCSPLIT_XACTPOS_BEGIN 2
- #define IFXUSB_HCSPLIT_XACTPOS_ALL 3
- unsigned hubaddr : 7; /*!< 13-07 Hub Address */
- unsigned prtaddr : 7; /*!< 06-00 Port Address */
- } b;
-} hcsplt_data_t;
-
-/*!
- \brief Bit fields in the Host Interrupt Register.
- */
-typedef union hcint_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved :21;
- unsigned datatglerr : 1; /*!< 10 Data Toggle Error */
- unsigned frmovrun : 1; /*!< 09 Frame Overrun */
- unsigned bblerr : 1; /*!< 08 Babble Error */
- unsigned xacterr : 1; /*!< 07 Transaction Err */
- unsigned nyet : 1; /*!< 06 NYET Response Received */
- unsigned ack : 1; /*!< 05 ACK Response Received */
- unsigned nak : 1; /*!< 04 NAK Response Received */
- unsigned stall : 1; /*!< 03 STALL Response Received */
- unsigned ahberr : 1; /*!< 02 AHB Error */
- unsigned chhltd : 1; /*!< 01 Channel Halted */
- unsigned xfercomp : 1; /*!< 00 Channel Halted */
- }b;
-} hcint_data_t;
-
-
-/*!
- \brief Bit fields in the Host Channel Transfer Size
- Register.
- */
-typedef union hctsiz_data
-{
- uint32_t d32;
- struct
- {
- /** */
- unsigned dopng : 1; /*!< 31 Do PING protocol when 1 */
- /**
- * Packet ID for next data packet
- * 0: DATA0
- * 1: DATA2
- * 2: DATA1
- * 3: MDATA (non-Control), SETUP (Control)
- */
- unsigned pid : 2; /*!< 30-29 Packet ID for next data packet
- 0: DATA0
- 1: DATA2
- 2: DATA1
- 3: MDATA (non-Control), SETUP (Control)
- */
- #define IFXUSB_HCTSIZ_DATA0 0
- #define IFXUSB_HCTSIZ_DATA1 2
- #define IFXUSB_HCTSIZ_DATA2 1
- #define IFXUSB_HCTSIZ_MDATA 3
- #define IFXUSB_HCTSIZ_SETUP 3
- unsigned pktcnt :10; /*!< 28-19 Data packets to transfer */
- unsigned xfersize :19; /*!< 18-00 Total transfer size in bytes */
- }b;
-} hctsiz_data_t;
-
-/*@}*//*IFXUSB_CSR_HOST_HC_REG*/
-
-/****************************************************************************/
-
-/*!
- \addtogroup IFXUSB_CSR_PWR_CLK_GATING_REG
- */
-/*@{*/
-/*!
- \brief Bit fields in the Power and Clock Gating Control Register
- */
-typedef union pcgcctl_data
-{
- uint32_t d32;
- struct
- {
- unsigned reserved : 27;
- unsigned physuspended : 1; /*!< 04 PHY Suspended */
- unsigned rstpdwnmodule : 1; /*!< 03 Reset Power Down Modules */
- unsigned pwrclmp : 1; /*!< 02 Power Clamp */
- unsigned gatehclk : 1; /*!< 01 Gate Hclk */
- unsigned stoppclk : 1; /*!< 00 Stop Pclk */
- } b;
-} pcgcctl_data_t;
-/*@}*//*IFXUSB_CSR_PWR_CLK_GATING_REG*/
-
-/****************************************************************************/
-
-#endif //__IFXUSB_REGS_H__
diff --git a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_version.h b/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_version.h
deleted file mode 100644
index 2dff7354e5..0000000000
--- a/target/linux/lantiq/files/drivers/usb/ifxhcd/ifxusb_version.h
+++ /dev/null
@@ -1,5 +0,0 @@
-
-#ifndef IFXUSB_VERSION
-#define IFXUSB_VERSION "3.0alpha B100312"
-#endif
-
diff --git a/target/linux/lantiq/files/include/linux/svip_nat.h b/target/linux/lantiq/files/include/linux/svip_nat.h
deleted file mode 100644
index 6563c38d58..0000000000
--- a/target/linux/lantiq/files/include/linux/svip_nat.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- Am Campeon 1-12; 81726 Munich, Germany
-
- THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
- WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
- SOFTWARE IS FREE OF CHARGE.
-
- THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
- ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
- WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
- OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
- PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
- PROPERTY INFRINGEMENT.
-
- EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
- FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
- OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- DEALINGS IN THE SOFTWARE.
-*******************************************************************************/
-#ifndef _SVIP_NAT_H
-#define _SVIP_NAT_H
-
-/* The declarations here have to be in a header file, because
- * they need to be known both to the kernel module
- * (in chardev.c) and the process calling ioctl (ioctl.c)
- */
-#include <linux/svip_nat_io.h>
-
-#define SVIP_NAT_VERSION "3.1"
-extern int do_SVIP_NAT(struct sk_buff *);
-
-#endif
diff --git a/target/linux/lantiq/files/include/linux/svip_nat_io.h b/target/linux/lantiq/files/include/linux/svip_nat_io.h
deleted file mode 100644
index bf42dd4ee3..0000000000
--- a/target/linux/lantiq/files/include/linux/svip_nat_io.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2007
- Infineon Technologies AG
- Am Campeon 1-12; 81726 Munich, Germany
-
- THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
- WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
- SOFTWARE IS FREE OF CHARGE.
-
- THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
- ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
- WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
- OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
- PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
- PROPERTY INFRINGEMENT.
-
- EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
- FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
- OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- DEALINGS IN THE SOFTWARE.
- *******************************************************************************/
-#ifndef _SVIP_NAT_IO_H_
-#define _SVIP_NAT_IO_H_
-
-#include <asm/ioctl.h>
-
-#define SVIP_NAT_DEVICE_NAME "svip_nat"
-#define PATH_SVIP_NAT_DEVICE_NAME "/dev/"SVIP_NAT_DEVICE_NAME
-
-#define MAJOR_NUM_SVIP_NAT 10
-#define MINOR_NUM_SVIP_NAT 120
-
-/** maximum SVIP devices supported on a Line card system */
-#define SVIP_SYS_NUM 12
-
-/** maximum voice packet channels possible per SVIP device */
-#define SVIP_CODEC_NUM 16
-
-/** start UDP port number of the SVIP Linecard System */
-#define SVIP_UDP_FROM 50000
-
-/** @defgroup SVIP_NATAPI SVIP Custom NAT ioctl interface.
- An ioctl interface is provided to add a rule into the SVIP NAT table and
- to respectively remove the rule form it. The ioctl interface is accessible
- using the fd issued upon opening the special device node /dev/svip_nat.
- @{ */
-
-/** Used to add a new rule to the SVIP Custom NAT table. If a rule already
- exists for the target UDP port, that rule shall be overwritten.
-
- \param SVIP_NAT_IO_Rule_t* The parameter points to a
- \ref SVIP_NAT_IO_Rule_t structure.
- */
-#define FIO_SVIP_NAT_RULE_ADD \
- _IOW(MAJOR_NUM_SVIP_NAT, 1, SVIP_NAT_IO_Rule_t)
-
-/** Used to remove a rule from the SVIP Custom NAT table. No check is
- performed whether the rule already exists or not. The remove operation is
- performed as long as the target UDP port is within the defined port range.
-
- \param SVIP_NAT_IO_Rule_t* The parameter points to a
- \ref SVIP_NAT_IO_Rule_t structure.
- */
-#define FIO_SVIP_NAT_RULE_REMOVE \
- _IOW(MAJOR_NUM_SVIP_NAT, 2, SVIP_NAT_IO_Rule_t)
-
-/** Used to list all rules in the SVIP Custom NAT table.
-
- \param <none>
- */
-#define FIO_SVIP_NAT_RULE_LIST \
- _IO(MAJOR_NUM_SVIP_NAT, 3)
-
-/** IP address in network-byte order */
-typedef u32 SVIP_IP_ADDR_t;
-/** UDP port in network-byte order */
-typedef u16 SVIP_UDP_PORT_t;
-
-#ifndef ETH_ALEN
-#define ETH_ALEN 6 /* Octets in one ethernet address */
-#endif
-
-/** NAT parameters part of the NAT table.
- These paramters are configurable through the NAT API. */
-typedef struct SVIP_NAT_IO_Rule
-{
- /** Remote peer, IP address */
- SVIP_IP_ADDR_t remIP;
- /** Remote peer, MAC address */
- u8 remMAC[ETH_ALEN];
- /** Target SVIP, IP address (local peer) */
- SVIP_IP_ADDR_t locIP;
- /** Target SVIP, MAC address */
- u8 locMAC[ETH_ALEN];
- /** Target SVIP, UDP port number */
- SVIP_UDP_PORT_t locUDP;
-} SVIP_NAT_IO_Rule_t;
-
-/** @} */
-#endif
diff --git a/target/linux/lantiq/files/net/ipv4/svip_nat.c b/target/linux/lantiq/files/net/ipv4/svip_nat.c
deleted file mode 100644
index 04a0d223a2..0000000000
--- a/target/linux/lantiq/files/net/ipv4/svip_nat.c
+++ /dev/null
@@ -1,1569 +0,0 @@
-/******************************************************************************
-
- Copyright (c) 2009
- Lantiq Deutschland GmbH
- Am Campeon 3; 81726 Munich, Germany
-
- THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
- WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
- SOFTWARE IS FREE OF CHARGE.
-
- THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
- ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
- WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
- OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
- PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
- PROPERTY INFRINGEMENT.
-
- EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
- FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
- OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- DEALINGS IN THE SOFTWARE.
-
- ****************************************************************************
-
-Description : This file contains implementation of Custom NAT function
-for Infineon's VINETIC-SVIP16
- *******************************************************************************/
-
-#include <linux/module.h>
-#include <linux/netfilter_ipv4.h>
-#include <linux/if_ether.h>
-#include <linux/netdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/if_vlan.h>
-#include <linux/udp.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/proc_fs.h>
-#include <linux/in6.h> /* just to shut up a warning */
-#include <linux/miscdevice.h>
-#include <asm/checksum.h>
-
-#include <linux/svip_nat.h>
-
-MODULE_AUTHOR("Lantiq Deutschland GmbH");
-MODULE_DESCRIPTION("SVIP Network Address Translation module");
-MODULE_LICENSE("GPL");
-
-#define SVIP_NAT_INFO_STR "@(#)SVIP NAT, version "SVIP_NAT_VERSION
-
-/** maximum voice packet channels possible on the SVIP LC system
- (equals maximum number of Codec channels possible) */
-#define SVIP_SYS_CODEC_NUM ((SVIP_SYS_NUM) * (SVIP_CODEC_NUM))
-
-/** end UDP port number of the SVIP Linecard System */
-#define SVIP_UDP_TO ((SVIP_UDP_FROM) + (SVIP_SYS_CODEC_NUM) - 1)
-
-/** end UDP port number of the Master SVIP in SVIP Linecard System */
-#define SVIP_UDP_TO_VOFW0 ((SVIP_UDP_FROM) + (SVIP_CODEC_NUM) - 1)
-
-#define SVIP_PORT_INRANGE(nPort) \
- ((nPort) >= (SVIP_UDP_FROM) && (nPort) <= (SVIP_UDP_TO))
-
-#define SVIP_PORT_INDEX(nPort) (nPort - SVIP_UDP_FROM)
-
-#define SVIP_NET_DEV_ETH0_IDX 0
-#define SVIP_NET_DEV_VETH0_IDX 1
-#define SVIP_NET_DEV_LO_IDX 2
-
-#define SVIP_NET_DEV_ETH0_NAME "eth0"
-#define SVIP_NET_DEV_ETH1_NAME "eth1"
-#define SVIP_NET_DEV_VETH1_NAME "veth0"
-#define SVIP_NET_DEV_LO_NAME "lo"
-
-#define SVIP_NAT_STATS_LOC2REM 0
-#define SVIP_NAT_STATS_REM2LOC 1
-#define SVIP_NAT_STATS_TYPES 2
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-#define SVIP_NAT_FOR_EACH_NETDEV(d) for_each_netdev(&init_net, dev)
-#define SVIP_NAT_IP_HDR(ethhdr) ip_hdr(ethhdr)
-#else
-#define SVIP_NAT_FOR_EACH_NETDEV(d) for(d=dev_base; dev; dev = dev->next)
-#define SVIP_NAT_IP_HDR(ethhdr) (ethhdr)->nh.iph
-#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) */
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-#define SVIP_NAT_SKB_MAC_HEADER(ethhdr) (ethhdr)->mac.ethernet
-#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
-#define SVIP_NAT_SKB_MAC_HEADER(ethhdr) (ethhdr)->mac.raw
-#else
-#define SVIP_NAT_SKB_MAC_HEADER(ethhdr) skb_mac_header(ethhdr)
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-#define VLAN_DEV_REAL_DEV(dev) vlan_dev_real_dev(dev)
-#define VLAN_DEV_VLAN_ID(dev) vlan_dev_vlan_id(dev)
-#else
-#define VLAN_DEV_REAL_DEV(dev) (VLAN_DEV_INFO(dev)->real_dev)
-#define VLAN_DEV_VLAN_ID(dev) (VLAN_DEV_INFO(dev)->vlan_id)
-#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) */
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
-#define MOD_INC_USE_COUNT
-#define MOD_DEC_USE_COUNT
-#endif
-
-#if ! ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && \
- (defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)))
-#define VLAN_8021Q_UNUSED
-#endif
-
-
-extern spinlock_t vlan_group_lock;
-extern struct net_device *__vlan_find_dev_deep(struct net_device *real_dev, unsigned short VID);
-
-typedef struct SVIP_NAT_stats
-{
- unsigned long inPackets;
- unsigned long outPackets;
- unsigned long outErrors;
-} SVIP_NAT_stats_t;
-
-typedef struct SVIP_NAT_table_entry
-{
- SVIP_NAT_IO_Rule_t natRule;
- SVIP_NAT_stats_t natStats[SVIP_NAT_STATS_TYPES];
-} SVIP_NAT_table_entry_t;
-
-/* pointer to the SVIP NAT table */
-static SVIP_NAT_table_entry_t *pNatTable = NULL;
-
-struct net_device *net_devs[3];
-static u32 *paddr_eth0;
-static u32 *paddr_eth0_0;
-static u32 *paddr_veth0;
-static u32 *pmask_veth0;
-
-static struct semaphore *sem_nat_tbl_access;
-static int proc_read_in_progress = 0;
-
-static int nDeviceOpen = 0;
-
-/* saves the NAT table index between subsequent invocation */
-static int nProcReadIdx = 0;
-
-static long SVIP_NAT_device_ioctl(struct file *,unsigned int ,unsigned long);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
-static int SVIP_NAT_device_release (struct inode *,struct file *);
-#else
-static void SVIP_NAT_device_release (struct inode *,struct file *);
-#endif
-static int SVIP_NAT_device_open (struct inode *,struct file *);
-
-/* This structure holds the interface functions supported by
- the SVIP NAT configuration device. */
-struct file_operations SVIP_NAT_Fops = {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
-owner: THIS_MODULE,
-#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0) */
- llseek: NULL, /* seek */
- read: NULL,
- write: NULL,
- readdir: NULL, /* readdir */
- poll: NULL, /* select */
- unlocked_ioctl: SVIP_NAT_device_ioctl, /* ioctl */
- mmap: NULL, /* mmap */
- open: SVIP_NAT_device_open, /* open, */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
- flush: NULL, /* flush */
-#endif
- release: SVIP_NAT_device_release /* close */
-};
-
-/** Structure holding MISC module operations */
-static struct miscdevice SVIP_NAT_miscdev =
-{
-minor: MINOR_NUM_SVIP_NAT,
- name: SVIP_NAT_DEVICE_NAME,
- fops: &SVIP_NAT_Fops
-};
-
-#ifdef CONFIG_SVIP_FW_PKT_SNIFFER
-int nSVIP_NAT_Sniffer;
-unsigned char pSVIP_NAT_SnifferMAC[ETH_ALEN];
-int nSVIP_NAT_SnifferMacSet;
-#endif
-
-/******************************************************************************/
-/**
- Function to read /proc/net/svip_nat/nat proc entry
-
- \arguments
- page - pointer to page buffer
- start - pointer to start address pointer
- off - offset
- count - maximum data length to read
- eof - end of file flag
- data - proc read data (provided by the function
- pointed to by data)
-
- \return
- length of read data
-
- \remarks:
- Each call of this routine forces a copy_to_user of the data returned by
- 'fn'. This routine will be called by the user until 'len = 0'.
- ****************************************************************************/
-static int SVIP_NAT_ProcRead (char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- unsigned long flags;
- int (*fn)(char *buf, int size);
- int len;
-
- /* If the NAT table index is negative, the reading has completed */
- if (nProcReadIdx < 0)
- {
- nProcReadIdx = 0;
- *eof = 1;
- proc_read_in_progress = 0;
- up(sem_nat_tbl_access);
- return 0;
- }
-
- local_irq_save(flags);
- if (!proc_read_in_progress)
- {
- proc_read_in_progress = 1;
- local_irq_restore(flags);
- /* we use this semaphore in order to ensure no other party(could be ioctl
- FIO_SVIP_NAT_RULE_LIST), uses function SVIP_NAT_ProcReadNAT(), during
- the time read of the proc file takes place */
- down(sem_nat_tbl_access);
- }
- else
- {
- local_irq_restore(flags);
- }
-
- if (data != NULL)
- {
- fn = data;
- len = fn (page, count);
- /* In this setup each read of the proc entries returns the read data by
- 'fn' to the user. The user keeps issuing read requests as long as the
- returned value of 'len' is greater than zero. */
- *eof = 1;
- *start = page;
- }
- else
- {
- len = 0;
- }
-
- return len;
-}
-
-#ifdef CONFIG_SVIP_FW_PKT_SNIFFER
-/**
- Function to read remaining proc entries
- */
-static int SVIP_NAT_ProcReadGen (char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int (*fn)(char *buf, int size);
- int len = 0;
-
- MOD_INC_USE_COUNT;
-
- if (data == NULL)
- {
- MOD_DEC_USE_COUNT;
- return 0;
- }
-
- fn = data;
- len = fn (page, count);
-
- if (len <= off + count)
- {
- *eof = 1;
- }
- *start = page + off;
- len -= off;
- if (len > count)
- {
- len = count;
- }
- if (len < 0)
- {
- len = 0;
- }
-
- MOD_DEC_USE_COUNT;
-
- return len;
-}
-#endif
-
-/******************************************************************************/
-/**
- Function for setting up /proc/net/svip_nat read data
-
- \arguments
- buf - pointer to read buffer
- count - size of read buffer
-
- \return
- length of read data into buffer
-
- \remarks:
- The global variable 'nProcReadIdx' is used to save the table index where
- the reading of the NAT table stopped. Reading is stopped when the end of
- the read buffer is approached. On the next itteration the reading continues
- from the saved index.
- *******************************************************************************/
-static int SVIP_NAT_ProcReadNAT(char *buf, int count)
-{
- int i, j;
- int len = 0;
- SVIP_NAT_IO_Rule_t *pNatRule;
-
- if (nProcReadIdx == -1)
- {
- nProcReadIdx = 0;
- return 0;
- }
-
- if (nProcReadIdx == 0)
- {
- len = sprintf(buf+len,
- "Remote host IP " /* 16 char */
- "Remote host MAC " /* 19 char */
- "Local host IP " /* 15 char */
- "Local host MAC " /* 19 char */
- "Local host UDP " /* 16 char */
- "Loc->Rem(in/out/err) " /* 22 char */
- "Rem->Loc(in/out/err)\n\r");
- }
-
- for (i = nProcReadIdx; i < SVIP_SYS_CODEC_NUM; i++)
- {
- int slen;
-
- pNatRule = &pNatTable[i].natRule;
-
- if (pNatRule->remIP != 0)
- {
- /* make sure not to overwrite the buffer */
- if (count < len+120)
- break;
-
- /* remIP */
- slen = sprintf(buf+len, "%d.%d.%d.%d",
- (int)((pNatRule->remIP >> 24) & 0xff),
- (int)((pNatRule->remIP >> 16) & 0xff),
- (int)((pNatRule->remIP >> 8) & 0xff),
- (int)((pNatRule->remIP >> 0) & 0xff));
- len += slen;
- for (j = 0; j < (16-slen); j++)
- len += sprintf(buf+len, " ");
-
- /* remMAC */
- slen = 0;
- for (j = 0; j < ETH_ALEN; j++)
- {
- slen += sprintf(buf+len+slen, "%02x%s",
- pNatRule->remMAC[j], j < ETH_ALEN-1 ? ":" : " ");
- }
- len += slen;
- for (j = 0; j < (19-slen); j++)
- len += sprintf(buf+len, " ");
-
- /* locIP */
- slen = sprintf(buf+len, "%d.%d.%d.%d",
- (int)((pNatRule->locIP >> 24) & 0xff),
- (int)((pNatRule->locIP >> 16) & 0xff),
- (int)((pNatRule->locIP >> 8) & 0xff),
- (int)((pNatRule->locIP >> 0) & 0xff));
- len += slen;
- for (j = 0; j < (15-slen); j++)
- len += sprintf(buf+len, " ");
-
- /* locMAC */
- slen = 0;
- for (j = 0; j < ETH_ALEN; j++)
- {
- slen += sprintf(buf+len+slen, "%02x%s",
- pNatRule->locMAC[j], j < ETH_ALEN-1 ? ":" : " ");
- }
- len += slen;
- for (j = 0; j < (19-slen); j++)
- len += sprintf(buf+len, " ");
-
- /* locUDP */
- slen = sprintf(buf+len, "%d", pNatRule->locUDP);
- len += slen;
- for (j = 0; j < (16-slen); j++)
- len += sprintf(buf+len, " ");
-
- /* NAT statistics, Local to Remote translation */
- slen = sprintf(buf+len, "(%ld/%ld/%ld)",
- pNatTable[i].natStats[SVIP_NAT_STATS_LOC2REM].inPackets,
- pNatTable[i].natStats[SVIP_NAT_STATS_LOC2REM].outPackets,
- pNatTable[i].natStats[SVIP_NAT_STATS_LOC2REM].outErrors);
- len += slen;
- for (j = 0; j < (22-slen); j++)
- len += sprintf(buf+len, " ");
-
- /* NAT statistics, Remote to Local translation */
- len += sprintf(buf+len, "(%ld/%ld/%ld)\n\r",
- pNatTable[i].natStats[SVIP_NAT_STATS_REM2LOC].inPackets,
- pNatTable[i].natStats[SVIP_NAT_STATS_REM2LOC].outPackets,
- pNatTable[i].natStats[SVIP_NAT_STATS_REM2LOC].outErrors);
- }
- }
- if (i == SVIP_SYS_CODEC_NUM)
- nProcReadIdx = -1; /* reading completed */
- else
- nProcReadIdx = i; /* reading still in process, buffer was full */
-
- return len;
-}
-
-#ifdef CONFIG_SVIP_FW_PKT_SNIFFER
-/**
- Converts MAC address from ascii to hex respesentaion
- */
-static int SVIP_NAT_MacAsciiToHex(const char *pMacStr, unsigned char *pMacHex)
-{
- int i=0, c=0, b=0, n=0;
-
- memset(pMacHex, 0, ETH_ALEN);
- while (pMacStr[i] != '\0')
- {
- if (n >= 0)
- {
- unsigned char nToHex = 0;
-
- /* check for hex digit */
- if (pMacStr[i] >= '0' && pMacStr[i] <= '9')
- nToHex = 0x30;
- else if (pMacStr[i] >= 'a' && pMacStr[i] <= 'f')
- nToHex = 0x57;
- else if (pMacStr[i] >= 'A' && pMacStr[i] <= 'F')
- nToHex = 0x37;
- else
- {
- if (n != 0)
- {
- printk(KERN_ERR "SVIP NAT: invalid MAC address format[%s]\n", pMacStr);
- return -1;
- }
- i++;
- continue;
- }
- n^=1;
- pMacHex[b] |= ((pMacStr[i] - nToHex)&0xf) << (4*n);
- if (n == 0)
- {
- /* advance to next byte, check if complete */
- if (++b >= ETH_ALEN)
- return 0;
- /* byte completed, next we expect a colon... */
- c = 1;
- /* and, do not check for hex digit */
- n = -1;
- }
- i++;
- continue;
- }
- if (c == 1)
- {
- if (pMacStr[i] == ':')
- {
- /* next we expect hex digit, again */
- n = 0;
- }
- else
- {
- printk(KERN_ERR "SVIP NAT: invalid MAC address format[%s]\n", pMacStr);
- return -1;
- }
- }
- i++;
- }
- return 0;
-}
-
-/**
- Used to set the destination MAC address of a host where incoming
- SVIP VoFW packets are to be addressed. In case the address is set
- to 00:00:00:00:00:00 (the default case), the packets will written
- out to eth0 with its original MAC addess.
-
- \remark
-usage: 'echo "00:03:19:00:15:D1" > cat /proc/net/svip_nat/snifferMAC'
-*/
-int SVIP_NAT_ProcWriteSnifferMAC (struct file *file, const char *buffer,
- unsigned long count, void *data)
-{
- /* at least strlen("xx:xx:xx:xx:xx:xx") characters, followed by '\0' */
- if (count >= 18)
- {
- int ret;
-
- ret = SVIP_NAT_MacAsciiToHex(buffer, pSVIP_NAT_SnifferMAC);
-
- if (ret != 0)
- return 0;
-
- if (!(pSVIP_NAT_SnifferMAC[0]==0 && pSVIP_NAT_SnifferMAC[1]==0 &&
- pSVIP_NAT_SnifferMAC[2]==0 && pSVIP_NAT_SnifferMAC[3]==0 &&
- pSVIP_NAT_SnifferMAC[4]==0 && pSVIP_NAT_SnifferMAC[5]==0))
- {
- nSVIP_NAT_SnifferMacSet = 1;
- }
- }
- return count;
-}
-
-/**
- Used to read the destination MAC address of a sniffer host
- */
-int SVIP_NAT_ProcReadSnifferMAC (char *buf, int count)
-{
- int len = 0;
-
- len = snprintf(buf, count, "%02x:%02x:%02x:%02x:%02x:%02x\n",
- pSVIP_NAT_SnifferMAC[0], pSVIP_NAT_SnifferMAC[1],
- pSVIP_NAT_SnifferMAC[2], pSVIP_NAT_SnifferMAC[3],
- pSVIP_NAT_SnifferMAC[4], pSVIP_NAT_SnifferMAC[5]);
-
- if (len > count)
- {
- printk(KERN_ERR "SVIP NAT: Only part of the text could be put into the buffer\n");
- return count;
- }
-
- return len;
-}
-
-/**
- Used to switch VoFW message sniffer on/off
-
- \remark
-usage: 'echo "1" > cat /proc/net/svip_nat/snifferOnOff'
-*/
-int SVIP_NAT_ProcWriteSnifferOnOff (struct file *file, const char *buffer,
- unsigned long count, void *data)
-{
- /* at least one digit expected, followed by '\0' */
- if (count >= 2)
- {
- int ret, nSnifferOnOff;
-
- ret = sscanf(buffer, "%d", &nSnifferOnOff);
-
- if (ret != 1)
- return count;
-
- if (nSnifferOnOff > 0)
- nSnifferOnOff = 1;
-
- nSVIP_NAT_Sniffer = nSnifferOnOff;
- }
- return count;
-}
-
-/**
- Used to read the VoFW message sniffer configuration (on/off)
- */
-int SVIP_NAT_ProcReadSnifferOnOff (char *buf, int count)
-{
- int len = 0;
-
- len = snprintf(buf, count, "%d\n", nSVIP_NAT_Sniffer);
-
- if (len > count)
- {
- printk(KERN_ERR "SVIP NAT: Only part of the text could be put into the buffer\n");
- return count;
- }
-
- return len;
-}
-#endif
-
-/******************************************************************************/
-/**
- Creates proc read/write entries
-
- \return
- 0 on success, -1 on error
- */
-/******************************************************************************/
-static int SVIP_NAT_ProcInstall(void)
-{
- struct proc_dir_entry *pProcParentDir, *pProcDir;
- struct proc_dir_entry *pProcNode;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
- pProcParentDir = proc_net;
-#else
- pProcParentDir = init_net.proc_net;
-#endif
- pProcDir = proc_mkdir(SVIP_NAT_DEVICE_NAME, pProcParentDir);
- if (pProcDir == NULL)
- {
- printk(KERN_ERR "SVIP NAT: cannot create proc dir %s/%s\n\r",
- pProcParentDir->name, SVIP_NAT_DEVICE_NAME);
- return -1;
- }
-
- pProcNode = create_proc_read_entry("nat", S_IFREG|S_IRUGO, pProcDir,
- SVIP_NAT_ProcRead, (void *)SVIP_NAT_ProcReadNAT);
- if (pProcNode == NULL)
- {
- printk(KERN_ERR "SVIP NAT: cannot create proc entry %s/%s",
- pProcDir->name, "nat");
- return -1;
- }
-
-#ifdef CONFIG_SVIP_FW_PKT_SNIFFER
- nSVIP_NAT_Sniffer = 0;
- /* creates proc entry for switching on/off sniffer to VoFW messages */
- pProcNode = create_proc_read_entry("snifferOnOff", S_IFREG|S_IRUGO|S_IWUGO,
- pProcDir, SVIP_NAT_ProcReadGen, (void *)SVIP_NAT_ProcReadSnifferOnOff);
- if (pProcNode == NULL)
- {
- printk(KERN_ERR "SVIP NAT: cannot create proc entry %s/%s\n\r",
- pProcDir->name, "snifferOnOff");
- return -1;
- }
- pProcNode->write_proc = SVIP_NAT_ProcWriteSnifferOnOff;
-
- memset (pSVIP_NAT_SnifferMAC, 0, ETH_ALEN);
- nSVIP_NAT_SnifferMacSet = 0;
- /* creates proc entry for setting MAC address of sniffer host to VoFW messages */
- pProcNode = create_proc_read_entry("snifferMAC", S_IFREG|S_IRUGO|S_IWUGO,
- pProcDir, SVIP_NAT_ProcReadGen, (void *)SVIP_NAT_ProcReadSnifferMAC);
- if (pProcNode == NULL)
- {
- printk(KERN_ERR "SVIP NAT: cannot create proc entry %s/%s\n\r",
- pProcDir->name, "snifferMAC");
- return -1;
- }
- pProcNode->write_proc = SVIP_NAT_ProcWriteSnifferMAC;
-#endif
-
- return 0;
-}
-
-/******************************************************************************/
-/**
- No actions done here, simply a check is performed if an open has already
- been performed. Currently only a single open is allowed as it is a sufficient
- to have hat a single process configuring the SVIP NAT at one time.
-
- \arguments
- inode - pointer to disk file data
- file - pointer to device file data
-
- \return
- 0 on success, else -1
- */
-/******************************************************************************/
-static int SVIP_NAT_device_open(struct inode *inode, struct file *file)
-{
- unsigned long flags;
- struct in_device *in_dev;
- struct in_ifaddr *ifa;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- local_irq_save(flags);
-#else
- local_save_flags(flags);
-#endif
-
- if (nDeviceOpen)
- {
- MOD_INC_USE_COUNT;
- local_irq_restore(flags);
- nDeviceOpen++;
- return 0;
- }
-
- /* find pointer to IP address of eth0 */
- if ((in_dev=in_dev_get(net_devs[SVIP_NET_DEV_ETH0_IDX])) != NULL)
- {
- for (ifa = in_dev->ifa_list; ifa != NULL; ifa = ifa->ifa_next)
- {
- if (!paddr_eth0 && ifa->ifa_address != 0)
- {
- paddr_eth0 = &ifa->ifa_address;
- continue;
- }
- if (paddr_eth0 && ifa->ifa_address != 0)
- {
- paddr_eth0_0 = &ifa->ifa_address;
- break;
- }
- }
- in_dev_put(in_dev);
- }
- if (paddr_eth0 == NULL || paddr_eth0_0 == NULL)
- {
- local_irq_restore(flags);
- return -ENODATA;
- }
-
- /* find pointer to IP address of veth0 */
- if ((in_dev=in_dev_get(net_devs[SVIP_NET_DEV_VETH0_IDX])) != NULL)
- {
- for (ifa = in_dev->ifa_list; ifa != NULL; ifa = ifa->ifa_next)
- {
- if (ifa->ifa_address != 0)
- {
- paddr_veth0 = &ifa->ifa_address;
- pmask_veth0 = &ifa->ifa_mask;
- break;
- }
- }
- in_dev_put(in_dev);
- }
- if (paddr_veth0 == NULL)
- {
- local_irq_restore(flags);
- return -ENODATA;
- }
-
- MOD_INC_USE_COUNT;
- nDeviceOpen++;
- local_irq_restore(flags);
-
- return 0;
-}
-
-
-/******************************************************************************/
-/**
- This function is called when a process closes the SVIP NAT device file
-
- \arguments
- inode - pointer to disk file data
- file - pointer to device file data
-
- \return
- 0 on success, else -1
-
-*/
-/******************************************************************************/
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
-static int SVIP_NAT_device_release(struct inode *inode,
- struct file *file)
-#else
-static void SVIP_NAT_device_release(struct inode *inode,
- struct file *file)
-#endif
-{
- unsigned long flags;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- save_flags(flags);
- cli();
-#else
- local_save_flags(flags);
-#endif
-
- /* The device can now be openned by the next caller */
- nDeviceOpen--;
-
- MOD_DEC_USE_COUNT;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- restore_flags(flags);
-#else
- local_irq_restore(flags);
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
- return 0;
-#endif
-}
-
-
-/******************************************************************************/
-/**
- This function is called when a process closes the SVIP NAT device file
-
- \arguments
- inode - pointer to disk file data
- file - pointer to device file data
- ioctl_num - ioctl number requested
- ioctl_param - pointer to data related to the ioctl number
-
- \return
- 0 on success, else -1
-
-*/
-/******************************************************************************/
-long SVIP_NAT_device_ioctl (struct file *file,
- unsigned int ioctl_num, unsigned long ioctl_param)
-{
- int ret = 0;
- SVIP_NAT_IO_Rule_t *pNatRule, *pNatRuleIn;
- SVIP_UDP_PORT_t nPort;
- int nNatIdx;
- int bWrite = 0;
- int bRead = 0;
- unsigned char *pData = 0;
- int nSize;
-
- if (_IOC_DIR(ioctl_num) & _IOC_WRITE)
- bWrite = 1;
- if (_IOC_DIR(ioctl_num) & _IOC_READ)
- bRead = 1;
- nSize = _IOC_SIZE(ioctl_num);
-
- if (nSize > sizeof(int))
- {
- if (bRead || bWrite)
- {
- pData = kmalloc (nSize, GFP_KERNEL);
- if (bWrite)
- {
- if (copy_from_user ((void *)pData, (void *)ioctl_param, nSize) != 0)
- {
- printk(KERN_ERR "SVIP NAT: ioctl %x: copy_from_user() failed!\n", ioctl_num);
- ret = -1;
- goto error;
- }
- }
- }
- }
-
- switch (ioctl_num)
- {
- case FIO_SVIP_NAT_RULE_ADD:
-
- pNatRuleIn = (SVIP_NAT_IO_Rule_t *)pData;
-
- /* check if destination UDP port is within range */
- nPort = ntohs(pNatRuleIn->locUDP);
-
- if (!SVIP_PORT_INRANGE(nPort))
- {
- printk(KERN_ERR "SVIP NAT: Error, UDP port(%d) is out of range(%d..%d)\n",
- nPort, SVIP_UDP_FROM, SVIP_UDP_TO);
- ret = -1;
- goto error;
- }
- nNatIdx = SVIP_PORT_INDEX(nPort);
-
- down(sem_nat_tbl_access);
- pNatRule = &pNatTable[nNatIdx].natRule;
-
- /* add rule to the NAT table */
- pNatRule->remIP = pNatRuleIn->remIP;
- memcpy((char *)pNatRule->remMAC, (char *)pNatRuleIn->remMAC, ETH_ALEN);
- pNatRule->locIP = pNatRuleIn->locIP;
- memcpy((char *)pNatRule->locMAC, (char *)pNatRuleIn->locMAC, ETH_ALEN);
- pNatRule->locUDP = pNatRuleIn->locUDP;
-
- memset(pNatTable[nNatIdx].natStats, 0,
- sizeof(SVIP_NAT_stats_t)*SVIP_NAT_STATS_TYPES);
- up(sem_nat_tbl_access);
- break;
-
- case FIO_SVIP_NAT_RULE_REMOVE:
-
- pNatRuleIn = (SVIP_NAT_IO_Rule_t *)pData;
-
- /* check if destination UDP port is within range */
- nPort = ntohs(pNatRuleIn->locUDP);
- if (!SVIP_PORT_INRANGE(nPort))
- {
- printk(KERN_ERR "SVIP NAT: Error, UDP port(%d) is out of range(%d..%d)\n",
- nPort, SVIP_UDP_FROM, SVIP_UDP_TO);
- ret = -1;
- goto error;
- }
- nNatIdx = SVIP_PORT_INDEX(nPort);
- down(sem_nat_tbl_access);
- /* remove rule from the NAT table */
- memset(&pNatTable[nNatIdx], 0, sizeof(SVIP_NAT_table_entry_t));
- up(sem_nat_tbl_access);
- break;
-
- case FIO_SVIP_NAT_RULE_LIST:
- {
- int len;
- char buf[256];
-
- down(sem_nat_tbl_access);
- while (nProcReadIdx != -1)
- {
- len = SVIP_NAT_ProcReadNAT(buf, 256);
- if (len > 0)
- printk("%s", buf);
- }
- nProcReadIdx = 0;
- up(sem_nat_tbl_access);
- break;
- }
-
- default:
- printk(KERN_ERR "SVIP NAT: unsupported ioctl (%x) command for device %s\n",
- ioctl_num, PATH_SVIP_NAT_DEVICE_NAME);
- ret = -1;
- goto error;
- }
-
- if (nSize > sizeof(int))
- {
- if (bRead)
- {
- if (copy_to_user ((void *)ioctl_param, (void *)pData, nSize) != 0)
- {
- printk(KERN_ERR "SVIP NAT: ioctl %x: copy_to_user() failed!\n", ioctl_num);
- ret = -1;
- goto error;
- }
- }
- }
-
-error:
- if (pData)
- kfree(pData);
-
- return ret;
-}
-
-#if 0
-void dump_msg(unsigned char *pData, unsigned int nLen)
-{
- int i;
-
- for (i=0; i<nLen; i++)
- {
- if (!i || !(i%16))
- printk("\n ");
- else if (i && !(i%4))
- printk(" ");
- printk("%02x", pData[i]);
- }
- if (--i%16)
- printk("\n");
-}
-#endif
-
-/******************************************************************************/
-/**
- Used to recalculate IP/UDP checksum using the original IP/UDP checksum
- coming with the packet. The original source and destination IP addresses
- are accounted for, and, the checksum is updated using the new source and
- destination IP addresses.
-
- \arguments
- skb - pointer to the receiving socket buffer
- csum_old - original checksum
- saddr_old - pointer to original source IP address
- saddr_new - pointer to new source IP address
- daddr_old - pointer to original destination IP address
- daddr_new - pointer to new destination IP address
-
- \return
- recalculated IP/UDP checksum
- */
-/******************************************************************************/
-static inline u16 ip_udp_quick_csum(u16 csum_old, u16 *saddr_old, u16 *saddr_new,
- u16 *daddr_old, u16 *daddr_new)
-{
- u32 sum;
-
- sum = csum_old;
-
- /* convert back from one's complement */
- sum = ~sum & 0xffff;
-
- if (sum < saddr_old[0]) sum += 0xffff;
- sum -= saddr_old[0];
- if (sum < saddr_old[1]) sum += 0xffff;
- sum -= saddr_old[1];
- if (sum < daddr_old[0]) sum += 0xffff;
- sum -= daddr_old[0];
- if (sum < daddr_old[1]) sum += 0xffff;
- sum -= daddr_old[1];
-
- sum += saddr_new[0];
- sum += saddr_new[1];
- sum += daddr_new[0];
- sum += daddr_new[1];
-
- /* take only 16 bits out of the 32 bit sum and add up the carries */
- while (sum >> 16)
- sum = (sum & 0xffff)+((sum >> 16) & 0xffff);
-
- /* one's complement the result */
- sum = ~sum;
-
- return (u16)(sum & 0xffff);
-}
-
-
-/******************************************************************************/
-/**
- Returns a pointer to an ipv4 address assigned to device dev. The ipv4
- instance checked is pointed to by ifa_start. The function is suited for
- itterative calls.
-
- \arguments
- dev - pointer to network interface
- ifa_start - pointer to ipv4 instance to return ipv4 address assigned
- to, NULL for the first one
- ppifa_addr - output parameter
-
- \return
- pointer to the next ipv4 instance, which can be null if ifa_start was
- the last instance present
- */
-/******************************************************************************/
-static struct in_ifaddr *get_ifaddr(struct net_device *dev,
- struct in_ifaddr *ifa_start, unsigned int **ppifa_addr)
-{
- struct in_device *in_dev;
- struct in_ifaddr *ifa = NULL;
-
- if ((in_dev=in_dev_get(dev)) != NULL)
- {
- if (ifa_start == NULL)
- ifa = in_dev->ifa_list;
- else
- ifa = ifa_start;
- if (ifa)
- {
- *ppifa_addr = &ifa->ifa_address;
- ifa = ifa->ifa_next;
- }
- in_dev_put(in_dev);
- return ifa;
- }
- *ppifa_addr = NULL;
- return NULL;
-}
-
-/******************************************************************************/
-/**
- This function performs IP NAT for received packets satisfying the
- following requirements:
-
- - packet is destined to local IP host
- - transport protocol type is UDP
- - destination UDP port is within range
-
- \arguments
- skb - pointer to the receiving socket buffer
-
- \return
- returns 1 on performed SVIP NAT, else returns 0
-
- \remarks
- When function returns 0, it indicates the caller to pass the
- packet up the IP stack to make further decision about it
- */
-/******************************************************************************/
-int do_SVIP_NAT (struct sk_buff *skb)
-{
- struct net_device *real_dev;
- struct iphdr *iph;
- struct udphdr *udph;
- SVIP_NAT_IO_Rule_t *pNatRule;
- int nNatIdx, in_eth0, nDir;
-#ifndef VLAN_8021Q_UNUSED
- int vlan;
- unsigned short vid;
-#endif /* ! VLAN_8021Q_UNUSED */
- SVIP_UDP_PORT_t nPort;
- u32 orgSrcIp, orgDstIp, *pSrcIp, *pDstIp;
- struct ethhdr *ethh;
-
- /* do not consider if SVIP NAT device not open. */
- if (!nDeviceOpen)
- {
- return 0;
- }
-
- /* consider only UDP packets. */
- iph = SVIP_NAT_IP_HDR(skb);
- if (iph->protocol != IPPROTO_UDP)
- {
- return 0;
- }
-
- udph = (struct udphdr *)((u_int32_t *)iph + iph->ihl);
- /* consider only packets which UDP port numbers reside within
- the predefined SVIP NAT UDP port range. */
- if ((!SVIP_PORT_INRANGE(ntohs(udph->dest))) &&
- (!SVIP_PORT_INRANGE(ntohs(udph->source))))
- {
- return 0;
- }
-
-#ifndef VLAN_8021Q_UNUSED
- /* check if packet delivered over VLAN. VLAN packets will be routed over
- the VLAN interfaces of the respective real Ethernet interface, if one
- exists(VIDs must match). Else, the packet will be send out as IEEE 802.3
- Ethernet frame */
- if (skb->dev->priv_flags & IFF_802_1Q_VLAN)
- {
- vlan = 1;
- vid = VLAN_DEV_VLAN_ID(skb->dev);
- real_dev = VLAN_DEV_REAL_DEV(skb->dev);
- }
- else
- {
- vlan = 0;
- vid = 0;
- real_dev = skb->dev;
- }
-#endif /* ! VLAN_8021Q_UNUSED */
-
-#ifdef CONFIG_SVIP_FW_PKT_SNIFFER
- /** Debugging feature which can be enabled by writing,
- 'echo 1 > /proc/net/svip_nat/snifferOnOff'.
- It copies all packets received on veth0 and, sends them out over eth0.
- When a destination MAC address is specified through
- /proc/net/svip_nat/snifferMAC, this MAC addess will substitute the
- original MAC address of the packet.
- It is recommended to specify a MAC address of some host where Wireshark
- runs and sniffs for this traffic, else you may flood your LAN with
- undeliverable traffic.
-
-NOTE: In case of VLAN traffic the VLAN header information is lost. */
- if (nSVIP_NAT_Sniffer)
- {
- if (real_dev == net_devs[SVIP_NET_DEV_VETH0_IDX])
- {
- struct sk_buff *copied_skb;
-
- /* gain the Ethernet header from the skb */
- skb_push(skb, ETH_HLEN);
-
- copied_skb = skb_copy (skb, GFP_ATOMIC);
-
- if (nSVIP_NAT_SnifferMacSet == 1)
- {
- ethh = (struct ethhdr *)SVIP_NAT_SKB_MAC_HEADER(copied_skb);
- memcpy((char *)ethh->h_dest, (char *)pSVIP_NAT_SnifferMAC, ETH_ALEN);
- }
- copied_skb->dev = net_devs[SVIP_NET_DEV_ETH0_IDX];
- dev_queue_xmit(copied_skb);
-
- /* skip the ETH header again */
- skb_pull(skb, ETH_HLEN);
- }
- }
-#endif
-
-
- /* check if packet arrived on eth0 */
- if (real_dev == net_devs[SVIP_NET_DEV_ETH0_IDX])
- {
- /* check if destination IP address equals the primary assigned IP address
- of interface eth0. This is the case of packets originating from a
- remote peer that are to be delivered to a channel residing on THIS
- voice linecard system. This is typical SVIP NAT case, therefore this
- rule is placed on top. */
- if (iph->daddr == *paddr_eth0)
- {
- nPort = ntohs(udph->dest);
- nDir = SVIP_NAT_STATS_REM2LOC;
- }
- /* check if destination IP address equals the secondary assigned IP address
- of interface eth0. This is not a typical SVIP NAT case. It is basically
- there, as someone might like for debugging purpose to use the LCC to route
- Slave SVIP packets which are part of voice/fax streaming. */
- else if (iph->daddr == *paddr_eth0_0)
- {
- nPort = ntohs(udph->source);
- nDir = SVIP_NAT_STATS_LOC2REM;
- }
-#ifndef VLAN_8021Q_UNUSED
- /* when the packet did not hit the top two rules, here we check if the packet
- has addressed any of the IP addresses assigned to the VLAN interface attached
- to eth0. This is not recommended approach because of the CPU cost incurred. */
- else if (vlan)
- {
- unsigned int *pifa_addr;
- struct in_ifaddr *ifa_start = NULL;
- int i = 0;
-
- do
- {
- ifa_start = get_ifaddr(skb->dev, ifa_start, &pifa_addr);
- if (!pifa_addr)
- {
- /* VLAN packet received on vlan interface attached to eth0,
- however no IP address assigned to the interface.
- The packet is ignored. */
- return 0;
- }
- if (iph->daddr == *pifa_addr)
- {
- /* packet destined to... */
- break;
- }
- if (!ifa_start)
- {
- return 0;
- }
- i++;
- } while (ifa_start);
- if (!i)
- {
- /* ...primary assigned IP address to the VLAN interface. */
- nPort = ntohs(udph->dest);
- nDir = SVIP_NAT_STATS_REM2LOC;
- }
- else
- {
- /* ...secondary assigned IP address to the VLAN interface. */
- nPort = ntohs(udph->source);
- nDir = SVIP_NAT_STATS_LOC2REM;
- }
- }
-#endif /* ! VLAN_8021Q_UNUSED */
- else
- {
- return 0;
- }
- in_eth0 = 1;
- }
- /* check if packet arrived on veth0 */
- else if (real_dev == net_devs[SVIP_NET_DEV_VETH0_IDX])
- {
- nPort = ntohs(udph->source);
- nDir = SVIP_NAT_STATS_LOC2REM;
- in_eth0 = 0;
- }
- else
- {
- /* packet arrived neither on eth0, nor veth0 */
- return 0;
- }
-
- /* calculate the respective index of the NAT table */
- nNatIdx = SVIP_PORT_INDEX(nPort);
- /* process the packet if a respective NAT rule exists */
- pNatRule = &pNatTable[nNatIdx].natRule;
-
- ethh = (struct ethhdr *)SVIP_NAT_SKB_MAC_HEADER(skb);
-
- /* copy packet's original source and destination IP addresses to use
- later on to perform efficient checksum recalculation */
- orgSrcIp = iph->saddr;
- orgDstIp = iph->daddr;
-
- if (in_eth0)
- {
- u8 *pDstMac;
-
- /* Process packet arrived on eth0 */
-
- if (nDir == SVIP_NAT_STATS_REM2LOC && iph->saddr == pNatRule->remIP)
- {
- pDstIp = &pNatRule->locIP;
- pDstMac = pNatRule->locMAC;
- }
- else if (nDir == SVIP_NAT_STATS_LOC2REM && iph->saddr == pNatRule->locIP)
- {
- pDstIp = &pNatRule->remIP;
- pDstMac = pNatRule->remMAC;
- }
- else
- {
- /* Rule check failed. The packet is passed up the layers,
- it will be dropped by UDP */
- return 0;
- }
-
- if ((*pDstIp & *pmask_veth0) == (*paddr_veth0 & *pmask_veth0))
- {
-#ifndef VLAN_8021Q_UNUSED
- if (vlan)
- {
- struct net_device *vlan_dev;
-
- spin_lock_bh(&vlan_group_lock);
- vlan_dev = __vlan_find_dev_deep(net_devs[SVIP_NET_DEV_VETH0_IDX], vid);
- spin_unlock_bh(&vlan_group_lock);
- if (vlan_dev)
- {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- struct vlan_ethhdr *vethh;
-
- skb_push(skb, VLAN_ETH_HLEN);
- /* reconstruct the VLAN header.
-NOTE: priority information is lost */
- vethh = (struct vlan_ethhdr *)skb->data;
- vethh->h_vlan_proto = htons(ETH_P_8021Q);
- vethh->h_vlan_TCI = htons(vid);
- vethh->h_vlan_encapsulated_proto = htons(ETH_P_IP);
- ethh = (struct ethhdr *)vethh;
-#else
- skb_push(skb, ETH_HLEN);
-#endif
- skb->dev = vlan_dev;
- }
- else
- {
- skb->dev = net_devs[SVIP_NET_DEV_VETH0_IDX];
- skb_push(skb, ETH_HLEN);
- }
- }
- else
-#endif /* ! VLAN_8021Q_UNUSED */
- {
- skb->dev = net_devs[SVIP_NET_DEV_VETH0_IDX];
- skb_push(skb, ETH_HLEN);
- }
- pSrcIp = paddr_veth0;
- }
- else
- {
-#ifndef VLAN_8021Q_UNUSED
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- if (vlan)
- {
- struct vlan_ethhdr *vethh;
-
- /* reconstruct the VLAN header.
-NOTE: priority information is lost */
- skb_push(skb, VLAN_ETH_HLEN);
- vethh = (struct vlan_ethhdr *)skb->data;
- vethh->h_vlan_proto = htons(ETH_P_8021Q);
- vethh->h_vlan_TCI = htons(vid);
- vethh->h_vlan_encapsulated_proto = htons(ETH_P_IP);
- ethh = (struct ethhdr *)vethh;
- }
- else
-#endif
-#endif /* ! VLAN_8021Q_UNUSED */
- {
- skb_push(skb, ETH_HLEN);
- }
- /* source IP address equals the destination IP address
- of the incoming packet */
- pSrcIp = &iph->daddr;
- }
- iph->saddr = *pSrcIp;
- memcpy((char *)ethh->h_source, (char *)skb->dev->dev_addr, ETH_ALEN);
- iph->daddr = *pDstIp;
- memcpy((char *)ethh->h_dest, (char *)pDstMac, ETH_ALEN);
- }
- else
- {
- /* Process packet arrived on veth0 */
-
- if (iph->saddr != pNatRule->locIP)
- {
- /* Rule check failed. The packet is passed up the layers,
- it will be dropped by UDP */
- return 0;
- }
-
- if (!((pNatRule->remIP & *pmask_veth0) == (*paddr_veth0 & *pmask_veth0)))
- {
-#ifndef VLAN_8021Q_UNUSED
- if (vlan)
- {
- struct net_device *vlan_dev;
-
- spin_lock_bh(&vlan_group_lock);
- vlan_dev = __vlan_find_dev_deep(net_devs[SVIP_NET_DEV_ETH0_IDX], vid);
- spin_unlock_bh(&vlan_group_lock);
- if (vlan_dev)
- {
- unsigned int *pifa_addr;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- struct vlan_ethhdr *vethh;
-
- skb_push(skb, VLAN_ETH_HLEN);
- /* construct the VLAN header, note priority information is lost */
- vethh = (struct vlan_ethhdr *)skb->data;
- vethh->h_vlan_proto = htons(ETH_P_8021Q);
- vethh->h_vlan_TCI = htons(vid);
- vethh->h_vlan_encapsulated_proto = htons(ETH_P_IP);
- ethh = (struct ethhdr *)vethh;
-#else
- skb_push(skb, ETH_HLEN);
-#endif
- skb->dev = vlan_dev;
-
- get_ifaddr(skb->dev, NULL, &pifa_addr);
- if (pifa_addr)
- {
- pSrcIp = pifa_addr;
- }
- else
- {
- pSrcIp = paddr_eth0;
- }
- }
- else
- {
- skb->dev = net_devs[SVIP_NET_DEV_ETH0_IDX];
- pSrcIp = paddr_eth0;
- skb_push(skb, ETH_HLEN);
- }
- }
- else
-#endif /* ! VLAN_8021Q_UNUSED */
- {
- skb->dev = net_devs[SVIP_NET_DEV_ETH0_IDX];
- pSrcIp = paddr_eth0;
- skb_push(skb, ETH_HLEN);
- }
- }
- else
- {
- pSrcIp = paddr_veth0;
-#ifndef VLAN_8021Q_UNUSED
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- if (vlan)
- {
- struct vlan_ethhdr *vethh;
-
- skb_push(skb, VLAN_ETH_HLEN);
- /* reconstruct the VLAN header.
-NOTE: priority information is lost. */
- vethh = (struct vlan_ethhdr *)skb->data;
- vethh->h_vlan_proto = htons(ETH_P_8021Q);
- vethh->h_vlan_TCI = htons(vid);
- vethh->h_vlan_encapsulated_proto = htons(ETH_P_IP);
- ethh = (struct ethhdr *)vethh;
- }
- else
-#endif
-#endif /* ! VLAN_8021Q_UNUSED */
- {
- skb_push(skb, ETH_HLEN);
- }
- }
- iph->saddr = *pSrcIp;
- memcpy((char *)ethh->h_source, (char *)skb->dev->dev_addr, ETH_ALEN);
- iph->daddr = pNatRule->remIP;
- memcpy((char *)ethh->h_dest, (char *)pNatRule->remMAC, ETH_ALEN);
- }
- pNatTable[nNatIdx].natStats[nDir].inPackets++;
-
- iph->check = ip_udp_quick_csum(iph->check, (u16 *)&orgSrcIp, (u16 *)&iph->saddr,
- (u16 *)&orgDstIp, (u16 *)&iph->daddr);
- if (udph->check != 0)
- {
- udph->check = ip_udp_quick_csum(udph->check, (u16 *)&orgSrcIp, (u16 *)&iph->saddr,
- (u16 *)&orgDstIp, (u16 *)&iph->daddr);
- }
-
- /* write the packet out, directly to the network device */
- if (dev_queue_xmit(skb) < 0)
- pNatTable[nNatIdx].natStats[nDir].outErrors++;
- else
- pNatTable[nNatIdx].natStats[nDir].outPackets++;
-
- return 1;
-}
-
-/******************************************************************************/
-/**
- Function executed upon unloading of the SVIP NAT module. It unregisters the
- SVIP NAT configuration device and frees the memory used for the NAT table.
-
- \remarks:
- Currently the SVIP NAT module is statically linked into the Linux kernel
- therefore this routine cannot be executed.
- *******************************************************************************/
-static int __init init(void)
-{
- int ret = 0;
- struct net_device *dev;
-
- if (misc_register(&SVIP_NAT_miscdev) != 0)
- {
- printk(KERN_ERR "%s: cannot register SVIP NAT device node.\n",
- SVIP_NAT_miscdev.name);
- return -EIO;
- }
-
- /* allocation of memory for NAT table */
- pNatTable = (SVIP_NAT_table_entry_t *)kmalloc(
- sizeof(SVIP_NAT_table_entry_t) * SVIP_SYS_CODEC_NUM, GFP_ATOMIC);
- if (pNatTable == NULL)
- {
- printk (KERN_ERR "SVIP NAT: Error(%d), allocating memory for NAT table\n", ret);
- return -1;
- }
-
- /* clear the NAT table */
- memset((void *)pNatTable, 0, sizeof(SVIP_NAT_table_entry_t) * SVIP_SYS_CODEC_NUM);
-
- if ((sem_nat_tbl_access = kmalloc(sizeof(struct semaphore), GFP_KERNEL)))
- {
- sema_init(sem_nat_tbl_access, 1);
- }
-
- SVIP_NAT_ProcInstall();
-
- /* find pointers to 'struct net_device' of eth0 and veth0, respectevely */
- read_lock(&dev_base_lock);
- SVIP_NAT_FOR_EACH_NETDEV(dev)
- {
- if (!strcmp(dev->name, SVIP_NET_DEV_ETH0_NAME))
- {
- net_devs[SVIP_NET_DEV_ETH0_IDX] = dev;
- }
- if (!strcmp(dev->name, SVIP_NET_DEV_VETH1_NAME))
- {
- net_devs[SVIP_NET_DEV_VETH0_IDX] = dev;
- }
- else if (!strcmp(dev->name, SVIP_NET_DEV_ETH1_NAME))
- {
- net_devs[SVIP_NET_DEV_VETH0_IDX] = dev;
- }
- }
- read_unlock(&dev_base_lock);
-
- if (net_devs[SVIP_NET_DEV_ETH0_IDX] == NULL ||
- net_devs[SVIP_NET_DEV_VETH0_IDX] == NULL)
- {
- printk (KERN_ERR "SVIP NAT: Error, unable to locate eth0 and veth0 interfaces\n");
- return -1;
- }
-
- printk ("%s, (c) 2009, Lantiq Deutschland GmbH\n", &SVIP_NAT_INFO_STR[4]);
-
- return ret;
-}
-
-/******************************************************************************/
-/**
- Function executed upon unloading of the SVIP NAT module. It unregisters the
- SVIP NAT configuration device and frees the memory used for the NAT table.
-
- \remarks:
- Currently the SVIP NAT module is statically linked into the Linux kernel
- therefore this routine cannot be executed.
- *******************************************************************************/
-static void __exit fini(void)
-{
- MOD_DEC_USE_COUNT;
-
- /* unregister SVIP NAT configuration device */
- misc_deregister(&SVIP_NAT_miscdev);
-
- /* release memory of SVIP NAT table */
- if (pNatTable != NULL)
- {
- kfree (pNatTable);
- }
-}
-
-module_init(init);
-module_exit(fini);