lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 200 insertions, 0 deletions

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/WBMR.dts b/target/linux/lantiq/files/arch/mips/boot/dts/WBMR.dts
new file mode 100644
index 0000000000..9759b311b7
--- /dev/null
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/WBMR.dts
@@ -0,0 +1,200 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9";
+	model = "Buffalo WBMR-HP-G300H";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+		led-upgrade = &power_green;
+
+		led-dsl = &dsl;
+		led-internet = &online_green;
+		led-usb = &led_usb;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+		eject {
+			label = "eject";
+			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_EJECTCD>;
+		};
+		movie {
+			label = "movie";
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VIDEO>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_green: power {
+			label = "wbmr:green:power";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_red: power2 {
+			label = "wbmr:red:power";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		security {
+			label = "wbmr:yellow:security";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "wbmr:green:wireless";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "wbmr:green:dsl";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+		online_green: online {
+			label = "wbmr:green:internet";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+		online2 {
+			label = "wbmr:red:internet";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+		movie {
+			label = "wbmr:blue:movie";
+			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+		};
+		led_usb: usb {
+			label = "wbmr:green:usb";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		pci-in {
+			lantiq,groups = "req1";
+			lantiq,output = <0>;
+			lantiq,open-drain = <1>;
+			lantiq,pull = <2>;
+		};
+		pci-out {
+			lantiq,groups = "gnt1";
+			lantiq,output = <1>;
+			lantiq,pull = <0>;
+		};
+		pci_rst {
+			lantiq,pins = "io21";
+			lantiq,pull = <0>;
+			lantiq,output = <1>;
+		};
+	};
+};
+
+&gsw {
+	phy-mode = "rgmii";
+	mtd-mac-address = <&boardconfig 0x10024>;
+};
+
+&pci0 {
+	status = "okay";
+};
+
+&localbus {
+	nor@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0 0x0 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "uboot_env";
+				reg = <0x40000 0x20000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "firmware";
+				reg = <0x60000 0x1f20000>;
+			};
+
+			boardconfig: partition@1fc0000 {
+				label = "board";
+				reg = <0x1fc0000 0x20000>;
+				read-only;
+			};
+
+			partition@1fe0000 {
+				label = "calibration";
+				reg = <0x1fe0000 0x20000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};