lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 182 insertions, 0 deletions

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7312.dts b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7312.dts
new file mode 100644
index 0000000000..796b941ede
--- /dev/null
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7312.dts
@@ -0,0 +1,182 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "avm,fritz7312", "lantiq,xway", "lantiq,ar9";
+	model = "AVM FRITZ!Box 7312";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+
+		led-internet = &info_green;
+		led-dsl = &power;
+		led-wifi = &wlan;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wlan {
+			label = "wlan";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		dect {
+			label = "dect";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PHONE>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power: power {
+			label = "fritz7312:green:power";
+			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		voice {
+			label = "fritz7312:green:fon";
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+		dect {
+			label = "fritz7312:green:dect";
+			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+		};
+		wlan: wlan {
+			label = "fritz7312:green:wlan";
+			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		};
+		info_green: info_green {
+			label = "fritz7312:green:info";
+			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		pci {
+			lantiq,groups = "gnt1", "req1", "req2", "req4", "gnt2", "gnt3", "gnt4";
+			lantiq,function = "pci";
+		};
+		pci-in {
+			lantiq,groups = "req1", "req2", "req4";
+			lantiq,output = <0>;
+			lantiq,open-drain = <1>;
+			lantiq,pull = <2>;
+		};
+		pci-out {
+			lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
+			lantiq,output = <1>;
+			lantiq,pull = <0>;
+		};
+		ar8030-intr {
+			lantiq,groups = "exin3";
+			lantiq,function = "exin";
+			lantiq,pull = <2>;
+			lantiq,output = <0>;
+		};
+		ar8030-clk {
+			lantiq,groups = "clkout2";
+			lantiq,output = <1>;
+			lantiq,open-drain;
+		};
+		ar8030-rst {
+			lantiq,pins = "io34";
+			lantiq,output = <1>;
+			lantiq,pull = <2>;
+			lantiq,open-drain;
+		};
+	};
+};
+
+&gsw {
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	mtd-mac-address = <&ath9k_cal 0xa91>;
+	mtd-mac-address-increment = <(-2)>;
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&localbus {
+	nor@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0 0x0 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ath9k_cal: partition@0 {
+				label = "urlader";
+				reg = <0x00000 0x20000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "firmware";
+				reg = <0x20000 0xf60000>;
+			};
+
+			partition@f80000 {
+				label = "tffs (1)";
+				reg = <0xf80000 0x40000>;
+				read-only;
+			};
+
+			partition@fc0000 {
+				label = "tffs (2)";
+				reg = <0xfc0000 0x40000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	req-mask = <0xf>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+	};
+};