diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-18 11:48:58 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-21 21:30:36 +0200 |
| commit | 340de1d1545f6da3f21b06a23bb8288da6d992be (patch) | |
| tree | 95cb1f202c5a5ef282da654aafbcbd65d45a1aa9 /target/linux/lantiq/files-5.4 | |
| parent | 708c6772f629a857a7d13a0ca65d6093746da8c3 (diff) | |
| download | upstream-340de1d1545f6da3f21b06a23bb8288da6d992be.tar.gz upstream-340de1d1545f6da3f21b06a23bb8288da6d992be.tar.bz2 upstream-340de1d1545f6da3f21b06a23bb8288da6d992be.zip | |
lantiq: fritz7312: set maximum speed to 100 mbit on 5.4
The fritz 7312 does not support 1000 gbit. Advertising it makes it
worse. Some NIC will change to 1000 gibt and turn off and on again for
ever.
The previous patch in 36f628910b8b was only applied to the 4.19 file,
so let's just make it consistent with this patch.
Cc: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/lantiq/files-5.4')
| -rw-r--r-- | target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts index aa825abd9f..0f635127f8 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9_avm_fritz7312.dts @@ -108,6 +108,7 @@ phy0: ethernet-phy@0 { reg = <0>; reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + max-speed = <100>; }; }; }; |