lantiq: kernel 4.14: copy patches, config and dts files

This just copies the patches, configuration and dts files into the
directories hich are used for kernel 4.14.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

74 files changed, 11286 insertions, 0 deletions

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ACMP252.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ACMP252.dts
new file mode 100644
index 0000000000..7294720117
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ACMP252.dts
@@ -0,0 +1,102 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+/ {
+	compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
+	model = "AudioCodes MediaPack MP-252";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x0 0x20000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "uboot_env";
+						reg = <0x20000 0x20000>;
+					};
+
+					partition@40000 {
+						label = "boardconfig";
+						reg = <0x40000 0x60000>;
+						read-only;
+					};
+
+					partition@a0000 {
+						label = "firmware";
+						reg = <0xa0000 0xf20000>;
+					};
+
+					partition@fc0000 {
+						label = "sysconfig";
+						reg = <0xfc0000 0x40000>;
+					};
+
+					partition@0x1000000 {
+						label = "rootfs_data";
+						reg = <0x1000000 0x1000000>;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1", "req1";
+					lantiq,function = "pci";
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		pci@E105400 {
+			status = "okay";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ALL0333CJ.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ALL0333CJ.dts
new file mode 100644
index 0000000000..16c5facb35
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ALL0333CJ.dts
@@ -0,0 +1,120 @@
+/dts-v1/;
+
+#include "amazonse.dtsi"
+
+/ {
+	compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase";
+	model = "Allnet ALL0333CJ DSL Modem";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+
+		aliases {
+			led-boot = &power;
+			led-failsafe = &power;
+			led-running = &power;
+
+			led-dsl = &dsl;
+			led-internet = &online_green;
+		};
+
+	};
+
+	memory@0 {
+		reg = <0x0 0x1000000>;
+	};
+
+	fpi@b0000000 {
+		etop@E180000 {
+			phy-mode = "mii";
+		};
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				asc {
+					lantiq,groups = "asc";
+					lantiq,function = "asc";
+				};
+				keys_in {
+					lantiq,pins = "io0",/* "io25", */"io29";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <1>;
+				};
+			};
+		};
+
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x400000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>;
+						read-only;
+					};
+
+					partition@10000 {
+						label = "firmware";
+						reg = <0x10000 0x3ef200>;
+					};
+
+					partition@3ff200 {
+						label = "uboot_env";
+						reg = <0x3ff200 0xc00>;
+						read-only;
+					};
+
+					partition@3ffe00 {
+						label = "dummy_bits";
+						reg = <0x3ffe00 0x200>;
+						read-only;
+					};
+				};
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		/* power led: red=off, green=on */
+		power: power {
+			label = "all0333cj:green:power";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		lan: lan {
+			label = "all0333cj:green:lan";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		dsl: dsl {
+			label = "all0333cj:green:dsl";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		online_green: online {
+			label = "all0333cj:green:online";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+		online_red {
+			label = "all0333cj:red:online";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4510PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4510PW.dts
new file mode 100644
index 0000000000..4720b57dd3
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4510PW.dts
@@ -0,0 +1,232 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube";
+	model = "Wippies, Elisa";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power2;
+		led-running = &power;
+
+		led-dsl = &adsl;
+		led-internet = &internet;
+		led-usb = &usb;
+		led-usb2 = &usb2;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x1000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				lantiq,noxip;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "uboot_env";
+						reg = <0x40000 0x20000>;
+						read-only;
+					};
+
+					partition@60000 {
+						label = "firmware";
+						reg = <0x60000 0xfa0000>;
+					};
+				};
+			};
+		};
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu a23";
+					lantiq,function = "ebu";
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				exin {
+					lantiq,groups = "exin1", "exin2";
+					lantiq,function = "exin";
+					lantiq,output = <0>;
+				};
+				pci_in {
+					lantiq,groups = "req1", "req2";
+					lantiq,function = "pci";
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1", "gnt2";
+					lantiq,function = "pci";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				buttons {
+					lantiq,pins = "io3", "io14";
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+			};
+		};
+
+		gpios: stp@E100BB0 {
+			status = "okay";
+			lantiq,groups = <0x7>;
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			interrupt-map = <
+				0x6000 0 0 1 &icu0 135
+				0x7800 0 0 1 &icu0 66
+				0x7800 0 0 2 &icu0 66
+				0x7800 0 0 3 &icu0 66
+			>;
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+			req-mask = <0x7>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power: power {
+			label = "power";
+			gpios = <&gpios 21 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		power2: power2 {
+			label = "power2";
+			gpios = <&gpios 20 GPIO_ACTIVE_HIGH>;
+		};
+		lan1 {
+			label = "lan1";
+			gpios = <&gpios 19 GPIO_ACTIVE_HIGH>;
+		};
+		lan2 {
+			label = "lan2";
+			gpios = <&gpios 18 GPIO_ACTIVE_HIGH>;
+		};
+		lan3 {
+			label = "lan3";
+			gpios = <&gpios 17 GPIO_ACTIVE_HIGH>;
+		};
+		lan4 {
+			label = "lan4";
+			gpios = <&gpios 16 GPIO_ACTIVE_HIGH>;
+		};
+		wifi: wifi {
+			label = "wifi";
+			gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
+		};
+		adsl: adsl {
+			label = "adsl";
+			gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
+		};
+		internet: internet {
+			label = "internet";
+			gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
+		};
+		internet2 {
+			label = "internet2";
+			gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
+		};
+		voip {
+			label = "voip";
+			gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
+		};
+		phone {
+			label = "phone";
+			gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
+		};
+		phone2 {
+			label = "phone2";
+			gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
+		};
+		usb: usb {
+			label = "usb";
+			gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
+		};
+		usb2: usb2 {
+			label = "usb2";
+			gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
+		};
+		usb3 {
+			label = "usb3";
+			gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
+		};
+		unlabeled {
+			label = "unlabeled";
+			gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dts
new file mode 100644
index 0000000000..34f868f484
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "ARV4518PWR01.dtsi"
+
+/ {
+	compatible = "arcadyan,arv4518pwr01", "lantiq,xway", "lantiq,danube";
+	model = "SMC7908A-ISP";
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dtsi
new file mode 100644
index 0000000000..8e712bfec6
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dtsi
@@ -0,0 +1,198 @@
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+
+		led-dsl = &dsl;
+		led-internet = &online;
+		led-usb = &usb;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>; /* 64 KB */
+						read-only;
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x10000 0x10000>; /* 64 KB */
+						read-only;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x3d0000>;
+					};
+
+					boardconfig: partition@400000 {
+						label = "boardconfig";
+						reg = <0x3f0000 0x10000>;
+						read-only;
+					};
+				};
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x0>;
+			};
+
+			ath5k_eep {
+				compatible = "ath5k,eeprom";
+				ath,eep-flash = <&boardconfig 0x400>;
+				ath,mac-offset = <0x16>;
+				ath,mac-increment = <1>;
+				ath,eep-swap;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				pci_in {
+					lantiq,groups = "req1", "req2";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1", "gnt2";
+					lantiq,function = "pci";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+			req-mask = <0xf>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power: power {
+			label = "power";
+			gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		dsl: dsl {
+			label = "dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		online: online {
+			label = "online";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "wifi";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+		};
+		dsl2 {
+			label = "dsl2";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		usb: usb {
+			label = "usb";
+			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+		};
+		voice {
+			label = "voice";
+			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+		};
+		fxs1 {
+			label = "fxs1";
+			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+		};
+		fxs2 {
+			label = "fxs2";
+			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+		};
+		fxo {
+			label = "fxo";
+			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01A.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01A.dts
new file mode 100644
index 0000000000..771d0146d8
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01A.dts
@@ -0,0 +1,14 @@
+/dts-v1/;
+
+#include "ARV4518PWR01.dtsi"
+
+/ {
+	compatible = "arcadyan,arv4518pwr01a", "lantiq,xway", "lantiq,danube";
+	model = "SMC7908A-ISP, Airties WAV-221";
+
+	fpi@10000000 {
+		pci@E105400 {
+			lantiq,external-clock;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4519PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4519PW.dts
new file mode 100644
index 0000000000..8f781760f9
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4519PW.dts
@@ -0,0 +1,195 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube";
+	model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl;
+		led-internet = &internet_green;
+		led-usb = &usb;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>;
+						read-only;
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x10000 0x10000>;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x3d0000>;
+					};
+
+					boardconfig: partition@3f0000 {
+						label = "boardconfig";
+						reg = <0x3f0000 0x10000>;
+						read-only;
+					};
+				};
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x400>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+			req-mask = <0xf>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_green: power {
+			label = "arv4519pw:green:power";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_red: power2 {
+			label = "arv4519pw:red:power";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "arv4519pw:green:wlan";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "arv4519pw:green:dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		internet_green: online {
+			label = "arv4519pw:green:internet";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		online2 {
+			label = "arv4519pw:red:internet";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		usb: usb {
+			label = "arv4519pw:green:usb";
+			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+		};
+		voip {
+			label = "arv4519pw:green:voip";
+			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+		};
+		fxs1 {
+			label = "arv4519pw:green:phone1";
+			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+		};
+		fxs2 {
+			label = "arv4519pw:green:phone2";
+			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+		};
+		fxo {
+			label = "arv4519pw:green:line";
+			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+		};
+		wps2 {
+			label = "arv4519pw:green:wps";
+			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "arv4519pw:orange:wps";
+			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+		};
+		wps3 {
+			label = "arv4519pw:red:wps";
+			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4520PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4520PW.dts
new file mode 100644
index 0000000000..05e0dfe048
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4520PW.dts
@@ -0,0 +1,221 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube";
+	model = "Easybox 800, WAV-281";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_blue;
+		led-failsafe = &power_red;
+		led-running = &power_blue;
+
+		led-dsl = &dsl;
+		led-internet = &internet_blue;
+		led-usb = &usb;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH
+				&gpiomm 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x20000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "uboot_env";
+						reg = <0x20000 0x10000>;
+						read-only;
+					};
+
+					partition@30000 {
+						label = "firmware";
+						reg = <0x30000 0x3c0000>;
+					};
+
+					boardconfig: partition@7f0000 {
+						label = "boardconfig";
+						reg = <0x3f0000 0x10000>;
+						read-only;
+					};
+				};
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x400>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+// gpiomm 10 - switch
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "wps";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_blue: power {
+			label = "arv4520pw:blue:power";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		dsl: dsl {
+			label = "arv4520pw:blue:dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		internet_blue: internet {
+			label = "arv4520pw:blue:internet";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		power_red: power2 {
+			label = "arv4520pw:red:power";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "arv4520pw:yellow:wps";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+		};
+		wps2 {
+			label = "arv4520pw:red:wps";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+		/*
+			wps green is missing
+		*/
+		fxs1 {
+			label = "arv4520pw:blue:telefon1";
+			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+		};
+		fxs2 {
+			label = "arv4520pw:blue:telefon2";
+			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+		};
+		isdn {
+			label = "arv4520pw:blue:isdn";
+			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+		};
+		fxo {
+			label = "arv4520pw:blue:line";
+			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+		};
+		voice {
+			label = "arv4520pw:blue:sprache";
+			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+		};
+		usb: usb {
+			label = "arv4520pw:blue:usb";
+			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "arv4520pw:blue:wifi";
+			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+		};
+		internet2 {
+			label = "arv4520pw:red:internet";
+			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+		};
+		/*
+			info is missing
+		*/
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4525PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4525PW.dts
new file mode 100644
index 0000000000..61548c793a
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4525PW.dts
@@ -0,0 +1,169 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube";
+	model = "Speedport W501V Typ A";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		/* we dont have a power led, lets use the online led */
+		led-boot = &online;
+		led-failsafe = &online;
+
+		led-dsl = &dsl;
+		led-internet = &online;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>;
+						read-only;
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x10000 0x10000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x3d0000>;
+					};
+
+					boardconfig: partition@400000 {
+						label = "boardconfig";
+						reg = <0x3f0000 0x10000>;
+						read-only;
+					};
+				};
+			};
+
+			ath5k_eep {
+				compatible = "ath5k,eeprom";
+				ath,eep-flash = <&boardconfig 0x400>;
+				ath,mac-offset = <0x0>;
+				ath,eep-swap;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				relay {
+					lantiq,pins = "io31";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+/*
+#define ARV4525PW_PHYRESET	13
+#define ARV4525PW_RELAY		31
+*/
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		fxo {
+			label = "arv4525pw:green:festnetz";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		fxs {
+			label = "arv4525pw:green:internet";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "arv4525pw:green:t-dsl";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "arv4525pw:green:wlan";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		online: online {
+			label = "arv4525pw:green:online";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV452CQW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV452CQW.dts
new file mode 100644
index 0000000000..d996e8b66f
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV452CQW.dts
@@ -0,0 +1,237 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
+	model = "Arcor 801";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_blue;
+		led-failsafe = &power_red;
+		led-running = &power_blue;
+
+		led-dsl = &dsl_blue;
+		led-usb = &usb;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH
+				&gpiomm 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x400000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>;
+						read-only;
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x10000 0x10000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x3d0000>;
+					};
+
+					boardconfig: partition@3f0000 {
+						label = "boardconfig";
+						reg = <0x3f0000 0x10000>;
+						read-only;
+					};
+				};
+			};
+
+			ath5k_eep {
+				compatible = "ath5k,eeprom";
+				ath,eep-flash = <&boardconfig 0x400>;
+				ath,mac-offset = <0x0>;
+				ath,eep-swap;
+			};
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x77f>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				leds {
+					lantiq,pins = "io3", "io5", "io6", "io7", "io9";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+/*
+#define ARV452CPW_SWITCH_RESET          110
+*/
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power_blue: power0 {
+			label = "arv452cqw:blue:power";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		dsl_blue: dsl {
+			label = "arv452cqw:blue:dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		isdn {
+			label = "arv452cqw:blue:isdn";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		power_red: power1 {
+			label = "arv452cqw:red:power";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "arv452cqw:blue:wps";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+		};
+		wps1 {
+			label = "arv452cqw:yellow:wps";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+		fxs1 {
+			label = "arv452cqw:blue:telefon1";
+			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+		};
+		fxs2 {
+			label = "arv452cqw:blue:telefon2";
+			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+		};
+		wps2 {
+			label = "arv452cqw:red:wps";
+			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+		};
+		fxo {
+			label = "arv452cqw:blue:line";
+			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+		};
+		voice {
+			label = "arv452cqw:blue:sprache";
+			gpios = <&gpiomm 4 1>;
+		};
+		usb: usb {
+			label = "arv452cqw:blue:usb";
+			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "arv452cqw:blue:wlan";
+			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+		};
+		/*
+			internet blue and internet red are missing
+			dsl2 and dsl3 are not referenced in manual
+		*/
+		dsl2 {
+			label = "arv452cqw:yellow:dsl";
+			gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
+		};
+		dsl3 {
+			label = "arv452cqw:red:dsl";
+			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7506PW11.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7506PW11.dts
new file mode 100644
index 0000000000..3ec4bf41a0
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7506PW11.dts
@@ -0,0 +1,165 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
+	model = "Alice/O2 IAD 4421";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power_red;
+		led-running = &power;
+
+		led-dsl = &dsl;
+		led-internet = &internet;
+		led-wifi = &wlan;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "uboot_env";
+						reg = <0x40000 0x10000>;
+						read-only;
+					};
+
+					partition@50000 {
+						label = "firmware";
+						reg = <0x50000 0x7a0000>;
+					};
+
+					boardconfig: partition@7f0000 {
+						label = "board_config";
+						reg = <0x7f0000 0x10000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pci {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		/* GPIO 19: switch reset */
+		etop@E180000 {
+			phy-mode = "rmii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		wlan: wlan {
+			label = "arv7506pw11:green:wlan";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+		power: power {
+			label = "arv7506pw11:green:power";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		dsl: dsl {
+			label = "arv7506pw11:green:dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		internet: internet {
+			label = "arv7506pw11:green:internet";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		power_red: power_red {
+			label = "arv7506pw11:red:power";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		internet_red {
+			label = "arv7506pw11:red:internet";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+		};
+		info {
+			label = "arv7506pw11:green:info";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		telefon {
+			label = "arv7506pw11:green:telefon";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+		info_red {
+			label = "arv7506pw11:red:info";
+			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts
new file mode 100644
index 0000000000..dc3f614b9d
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts
@@ -0,0 +1,196 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
+	model = "Astoria Networks ARV7510PW22";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+
+		led-dsl = &internet;
+		led-usb = &umts;
+		led-wifi = &wlan;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x1000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "uboot_env";
+						reg = <0x40000 0x20000>;
+						read-only;
+					};
+
+					partition@60000 {
+						label = "firmware";
+						reg = <0x60000 0xf80000>;
+					};
+
+					boardconfig: partition@fe0000 {
+						label = "board_config";
+						reg = <0xfe0000 0x20000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_in {
+					lantiq,groups = "req1", "req2";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				pins_out {
+					lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
+					lantiq,output = <1>;
+				};
+				pins_in {
+					lantiq,pins = "io11", "io12", "io28";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		etop@E180000 {
+			/* Switch reset 19 */
+			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		restart {
+			label = "restart";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power: power {
+			label = "power";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		internet: internet {
+			label = "internet";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		wlan: wlan {
+			label = "wlan";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+		};
+		umts: 3g {
+			label = "3g";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+		message {
+			label = "message";
+			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	interrupt-map = <
+		0x7000 0 0 1 &icu0 30
+		0x7800 0 0 1 &icu0 135
+		0x7800 0 0 2 &icu0 135
+		0x7800 0 0 3 &icu0 135
+	>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0x3>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7518PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7518PW.dts
new file mode 100644
index 0000000000..41b1249323
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7518PW.dts
@@ -0,0 +1,232 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
+	model = "Astoria Networks ARV7518PW";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl;
+		led-internet = &online_green;
+		led-usb = &usb;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>;
+						read-only;
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x10000 0x10000>;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x7d0000>;
+					};
+
+					boardconfig: partition@400000 {
+						label = "boardconfig";
+						reg = <0x7f0000 0x10000>;
+						read-only;
+					};
+				};
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x0>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				leds {
+					lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
+					lantiq,output = <1>;
+				};
+				keys {
+					lantiq,pins = "io28", "io30";
+					lantiq,output = <0>;
+					lantiq,pull = <2>;
+					lantiq,open-drain = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+/*
+#define SWITCH_RESET          13
+*/
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power_green: power {
+			label = "arv7518pw:green:power";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		dsl: dsl {
+			label = "arv7518pw:green:dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		online_green: online {
+			label = "arv7518pw:green:internet";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "arv7518pw:green:wlan";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		power_red: power2 {
+			label = "arv7518pw:red:power";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+		};
+		online2 {
+			label = "arv7518pw:red:internet";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		usb: usb {
+			label = "arv7518pw:green:usb";
+			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+		};
+		voice {
+			label = "arv7518pw:green:voip";
+			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+		};
+		fxs1 {
+			label = "arv7518pw:green:phone1";
+			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+		};
+		fxs2 {
+			label = "arv7518pw:green:phone2";
+			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+		};
+		unlabeled {
+			label = "arv7518pw:amber:unlabeled";
+			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "arv7518pw:amber:wps";
+			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+		};
+		wps2 {
+			label = "arv7518pw:green:wps";
+			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+		};
+		wps3 {
+			label = "arv7518pw:red:wps";
+			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	lantiq,external-clock;
+	req-mask = <0xf>;
+
+	wifi@168c,0029 {
+		compatible = "pci168c,0029";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519PW.dts
new file mode 100644
index 0000000000..9983a7906f
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519PW.dts
@@ -0,0 +1,229 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube";
+	model = "Astoria Networks ARV7519PW";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power2;
+		led-running = &power;
+
+		led-dsl = &dsl;
+		led-internet = &online;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "uboot_env";
+						reg = <0x40000 0x20000>;
+					};
+
+					partition@60000 {
+						label = "firmware";
+						reg = <0x60000 0xf80000>;
+					};
+
+					boardconfig: partition@fe0000 {
+						label = "board_config";
+						reg = <0xfe0000 0x20000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				switch_rst {
+					lantiq,pins = "io19";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+
+		/* warning: passive port
+		only works with active devices */
+		ifxhcd@E101000 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power: power {
+			label = "power";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power2: power2 {
+			label = "power2";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+		online: online {
+			label = "online";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+		online2 {
+			label = "online2";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "wifi";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+		wifi2 {
+			label = "wifi2";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+		};
+		wifi3 {
+			label = "wifi3";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		voice {
+			label = "voice";
+			gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+		wps2 {
+			label = "wps2";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+		};
+		wps3 {
+			label = "wps3";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		lan {
+			label = "lan";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+		tv {
+			label = "tv";
+			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+		};
+		upgrade {
+			label = "upgrade";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* is there another way to "reserve" the GPIO? */
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		switch {
+			gpio-export,name = "switch";
+			gpio-export,output = <1>;
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0xf>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519RW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519RW22.dts
new file mode 100644
index 0000000000..0bdc150a1e
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519RW22.dts
@@ -0,0 +1,231 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
+	model = "Orange Livebox 2.1";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_green;
+		led-running = &power_green;
+
+		led-dsl = &internet_green;
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x0 0x60000>;
+						read-only;
+					};
+
+					partition@60000 {
+						label = "uboot-env";
+						reg = <0x60000 0x20000>;
+						read-only;
+					};
+
+					partition@80000 {
+						label = "firmware";
+						reg = <0x80000 0x1f00000>;
+					};
+
+					boardconfig: partition@1f80000 {
+						label = "boardconfig";
+						reg = <0x1f80000 0x80000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				pcie-rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+		};
+
+		ifxhcd@E106000 {
+			status = "okay";
+			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+		};
+
+		pcie@d900000 {
+			status = "okay";
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware1 = "lantiq/xrx200_phy22f_a14.bin";	/*VR9 1.1*/
+		firmware2 = "lantiq/xrx200_phy22f_a22.bin";	/*VR9 1.2*/
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		lan_green {
+			label = "arv7519rw22:green:lan";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+		internet_red {
+			label = "arv7519rw22:red:internet";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+		};
+		power_green: power_green {
+			label = "arv7519rw22:green:power";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		alarm_blue {
+			label = "arv7519rw22:blue:alarm";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+		internet_orange {
+			label = "arv7519rw22:orange:internet";
+			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+		};
+		internet_green: internet_green {
+			label = "arv7519rw22:green:internet";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+		};
+		voice_green {
+			label = "arv7519rw22:green:voice";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mtd-mac-address = <&boardconfig 0x16>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+		};
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "mii";
+			phy-handle = <&phy13>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <5>;
+			phy-mode = "mii";
+			phy-handle = <&phy14>;
+		};
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "mii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@4 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <3>;
+			phy-mode = "mii";
+			phy-handle = <&phy12>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+		phy12: ethernet-phy@12 {
+			reg = <0x12>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+		phy14: ethernet-phy@14 {
+			reg = <0x14>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7525PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7525PW.dts
new file mode 100644
index 0000000000..0007535895
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7525PW.dts
@@ -0,0 +1,155 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
+	model = "Speedport W303V Typ A";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &power_green;
+		led-internet = &online;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>;
+						read-only;
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x10000 0x10000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x3d0000>;
+					};
+
+					boardconfig: partition@400000 {
+						label = "board_config";
+						reg = <0x3f0000 0x10000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1", "req1";
+					lantiq,function = "pci";
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power_green: power {
+			label = "arv7525pw:green:power";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_red: power1 {
+			label = "arv7525pw:red:power";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		online: online {
+			label = "arv7525pw:green:online";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		voice {
+			label = "arv7525pw:green:telefonie";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		voice2 {
+			label = "arv7525pw:red:telefonie";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "arv7525pw:green:wlan";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW.dts
new file mode 100644
index 0000000000..3591b43671
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW.dts
@@ -0,0 +1,238 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
+	model = "Arcor 802";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_red;
+		led-failsafe = &power_blue;
+		led-running = &power_red;
+
+		led-dsl = &internet_red;
+		led-usb = &umts;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>;
+						read-only;
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x10000 0x10000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x7d0000>;
+					};
+
+					boardconfig: partition@7f0000 {
+						label = "board_config";
+						reg = <0x7f0000 0x10000>;
+						read-only;
+					};
+				};
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x3>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_in {
+					lantiq,groups = "req2", "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				leds {
+					lantiq,pins = "io3", "io5", "io6", "io8";
+					lantiq,output = <1>;
+					lantiq,pull = <0>;
+				};
+				keys {
+					lantiq,pins = "io11", "io12", "io13", "io28";
+					lantiq,output = <0>;
+					lantiq,pull = <2>;
+					lantiq,open-drain = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		restart {
+			label = "restart";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power_blue: power1 {
+			label = "arv752dpw:blue:power";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+		internet_red: internet {
+			label = "arv752dpw:red:internet";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		message {
+			label = "arv752dpw:red:message";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		power_red: power {
+			label = "arv752dpw:red:power";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		voice1 {
+			label = "arv752dpw:red:voice";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		umts: umts {
+			label = "arv752dpw:red:umts";
+			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "arv752dpw:red:wifi";
+			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+		};
+		fxs1 {
+			label = "arv752dpw:green:tae-n";
+			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+		};
+		fxs2 {
+			label = "arv752dpw:green:tae-u";
+			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+		};
+		fxo {
+			label = "arv752dpw:green:isdn";
+			gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
+		};
+		internet2 {
+			label = "arv752dpw:blue:internet";
+			gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
+		};
+		voice2 {
+			label = "arv752dpw:blue:voice";
+			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	interrupt-map = <0x7000 0 0 1 &icu0 135>;
+	req-mask = <0x3>;
+
+	wifi@1814,0601 {
+		compatible = "pci1814,0601";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW22.dts
new file mode 100644
index 0000000000..8b5be8b76c
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW22.dts
@@ -0,0 +1,259 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
+	model = "Arcor 803";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_red;
+		led-failsafe = &power_blue;
+		led-running = &power_red;
+
+		led-dsl = &internet_red;
+		led-usb = &umts;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x30000>;
+						read-only;
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x30000 0x10000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x40000 0x7b0000>;
+					};
+
+					boardconfig: partition@7f0000 {
+						label = "board_config";
+						reg = <0x7f0000 0x10000>;
+						read-only;
+					};
+				};
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <3>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,open-drain = <1>;
+					lantiq,output = <1>;
+				};
+				leds {
+					lantiq,pins = "io3", "io5", "io6", "io8";
+					lantiq,open-drain = <1>;
+					lantiq,output = <1>;
+				};
+				buttons {
+					lantiq,pins = "io11", "io12", "io13", "io28";
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		restart {
+			label = "restart";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power_blue: power1 {
+			label = "arv752dpw22:blue:power";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+		internet_red: internet {
+			label = "arv752dpw22:red:internet";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		message {
+			label = "arv752dpw22:red:message";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		power_red: power {
+			label = "arv752dpw22:red:power";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		voice1 {
+			label = "arv752dpw22:red:voice";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		umts: umts {
+			label = "arv752dpw22:red:umts";
+			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "arv752dpw22:red:wifi";
+			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+		};
+		fxs1 {
+			label = "arv752dpw22:green:tae-n";
+			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+		};
+		fxs2 {
+			label = "arv752dpw22:green:tae-u";
+			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+		};
+		fxo {
+			label = "arv752dpw22:green:isdn";
+			gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
+		};
+		internet2 {
+			label = "arv752dpw22:blue:internet";
+			gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
+		};
+		voice2 {
+			label = "arv752dpw22:blue:voice";
+			gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+		};
+		eth1 {
+			 label = "arv752dpw22:green:lan1";
+			 gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
+		};
+		eth2 {
+			label = "arv752dpw22:green:lan2";
+			gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
+		};
+		eth3 {
+			label = "arv752dpw22:green:lan3";
+			gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
+		};
+		eth4 {
+			label = "arv752dpw22:green:lan4";
+			gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	interrupt-map = <
+		0x7000 0 0 1 &icu0 30
+		0x7800 0 0 1 &icu0 135
+		0x7800 0 0 2 &icu0 135
+		0x7800 0 0 3 &icu0 135
+	>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0x3>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV8539PW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV8539PW22.dts
new file mode 100644
index 0000000000..4edcde9763
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV8539PW22.dts
@@ -0,0 +1,180 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube";
+	model = "Speedport W 504V Typ A";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl_green;
+		led-internet = &online_green;
+		led-wifi = &wireless_green;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x30000>;	/* 192 KiB */
+						read-only;
+					};
+
+					partition@30000 {
+						label = "uboot";
+						reg = <0x30000 0x10000>;	/* 64 KiB */
+						read-only;
+					};
+
+					partition@40000 {
+						label = "firmware";
+						reg = <0x40000 0x7B0000>;       /* 7872 KiB */
+					};
+
+					art: partition@7F0000 {
+						label = "art";
+						reg = <0x7F0000 0x10000>;       /* 64 KiB*/
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				relay {
+					lantiq,pins = "io31";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mtd-mac-address = <&art 0x16>;
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+			lantiq,portmask = <0x3>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wlan {
+			label = "wlan";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+		/* key DECT is missing */
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_green: power-green {
+			label = "arv8539pw22:green:power";
+			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_red: power-red {
+			label = "arv8539pw22:red:power";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		dsl_green: dsl-green {
+			label = "arv8539pw22:green:dsl";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		online_green: online-green {
+			label = "arv8539pw22:green:online";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless_green: wireless-green {
+			label = "arv8539pw22:green:wlan";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		/*
+			telefonie green is missing
+		*/
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@168c,0029 {
+		compatible = "pci168c,0029";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+		mtd-mac-address = <&art 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ASL56026.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ASL56026.dts
new file mode 100644
index 0000000000..2037f40f03
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ASL56026.dts
@@ -0,0 +1,171 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
+	model = "BT OpenReach VDSL Modem";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl;
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x0800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x0 0x30000>;
+					};
+
+					partition@30000 {
+						label = "uboot_env";
+						reg = <0x30000 0x10000>;
+					};
+
+					partition@40000 {
+						label = "firmware";
+						reg = <0x40000 0x750000>;
+					};
+
+					partition@790000 {
+						label = "ddrconfig";
+						reg = <0x790000 0x70000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+			};
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware1 = "lantiq/xrx200_phy22f_a14.bin";	/*VR9 1.1*/
+		firmware2 = "lantiq/xrx200_phy22f_a22.bin";	/*VR9 1.2*/
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		dsl: dsl {
+			label = "asl56026:green:dsl";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		/* power-* is a bicolour led */
+		power_green: power_green {
+			label = "asl56026:green:power";
+			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		power_red: power_red {
+			label = "asl56026:red:power";
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		power_led_blink {
+			gpio-export,name = "power_led_blink";
+			gpio-export,output = <0>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		lantiq,switch;
+
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "mii";
+			phy-handle = <&phy11>;
+		};
+
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <3>;
+			phy-mode = "mii";
+			phy-handle = <&phy14>;
+		};
+
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+
+		phy14: ethernet-phy@14 {
+			reg = <0x14>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV2B.dts
new file mode 100644
index 0000000000..961fd9b929
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV2B.dts
@@ -0,0 +1,262 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
+	model = "BT Home Hub 2B";  /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_orange;
+		led-failsafe = &power_red;
+		led-running = &power_blue;
+
+		led-dsl = &broadband_blue;
+		led-wifi = &wireless_blue;
+	};
+
+	memory@0 {				  /* RAM: Samsung K4H511638F-LC 64MB */
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {				/* NOR Flash: Spansion S29AL004D 512KB */
+				compatible = "lantiq,nor";	/* "AMD AM29LV400BB" compatible on 3.3.8 */
+				lantiq,cs = <0>;
+				bank-width = <2>;
+				reg = <0 0x0 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x40000>; /* 256KB */
+					};
+
+					partition@40000 {
+						label = "uboot_env";
+						reg = <0x40000 0x10000>; /* 64KB */
+					};
+
+					partition@50000 {
+						label = "rg_conf_1";
+						reg = <0x50000 0x10000>;
+					};
+
+					partition@60000 {
+						label = "rg_conf_2";
+						reg = <0x60000 0x10000>;
+					};
+
+					partition@70000 {
+						label = "rg_conf_factory";
+						reg = <0x70000 0x10000>;
+					};
+				};
+			};
+
+			nand-parts@0 {		  /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
+				compatible = "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <1 0x0 0x2000000 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					ath9k_cal: partition@0 {
+						label = "art";	   /* Atheros 9160 wifi b/g/n radio EEPROM */
+						reg = <0x00000 0x4000>;
+						read-only;
+					};
+
+					partition@4000 {
+						label = "kernel";
+						reg = <0x4000 0x200000>;
+					};
+
+					partition@164000 {
+						label = "ubi";
+						reg = <0x204000 0x1DFC000>;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				nand_out {
+					lantiq,groups = "nand cle", "nand ale";
+					lantiq,function = "ebu";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+				nand_cs1 {
+					lantiq,groups = "nand cs1";
+					lantiq,function = "ebu";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+				};
+
+				btn_in {
+					lantiq,pins = "io2", "io15", "io22";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+		};
+
+		gpios: stp@E100BB0 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+		findhandset {
+			label = "findhandset";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PHONE>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		upgrading-orange {
+			label = "bthomehubv2b:orange:upgrading";
+			gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		phone-orange {
+			label = "bthomehubv2b:orange:phone";
+			gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
+		};
+		phone-blue {
+			label = "bthomehubv2b:blue:phone";
+			gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless-orange {
+			label = "bthomehubv2b:orange:wireless";
+			gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
+		};
+		wireless_blue: wireless-blue {
+			label = "bthomehubv2b:blue:wireless";
+			gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		broadband-red {
+			label = "bthomehubv2b:red:broadband";
+			gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
+		};
+		broadband-orange {
+			label = "bthomehubv2b:orange:broadband";
+			gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
+		};
+		broadband_blue: broadband-blue {
+			label = "bthomehubv2b:blue:broadband";
+			gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_red: power-red {
+			label = "bthomehubv2b:red:power";
+			gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
+		};
+		power_orange: power-orange {
+			label = "bthomehubv2b:orange:power";
+			gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		power_blue: power-blue {
+			label = "bthomehubv2b:blue:power";
+			gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@168c,0027 {
+		compatible = "pci168c,0027";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts
new file mode 100644
index 0000000000..d37b9728d2
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts
@@ -0,0 +1,208 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9";
+	model = "BT Home Hub 3A";  /* SoC: Lantiq ar9 @ 333MHz */
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_orange;
+		led-failsafe = &power_red;
+		led-running = &power_blue;
+
+		led-dsl = &broadband_blue;
+		led-wifi = &wireless_blue;
+	};
+
+	memory@0 {				  /* RAM: Samsung K4H511638F-LC 64MB */
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nand-parts@0 {		  /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
+				compatible = "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <1 0x0 0x2000000 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "preboot";
+						reg = <0x00000 0x8000>;
+						read-only;
+					};
+					partition@8000 {
+						label = "u-boot";
+						reg = <0x8000 0x05c000>;
+						read-only;
+					};
+					partition@64000 {
+						label = "uboot_env";
+						reg = <0x64000 0x004000>;
+					};
+					ath9k_cal: partition@68000 {
+						label = "art-copy";
+						reg = <0x68000 0x004000>;
+					};
+					partition@6c000 {
+						label = "kernel";
+						reg = <0x6c000 0x200000>;
+					};
+					partition@26c000 {
+						label = "ubi";
+						reg = <0x26c000 0x1d94000>;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				nand_out {
+					lantiq,groups = "nand cle", "nand ale";
+					lantiq,function = "ebu";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+				nand_cs1 {
+					lantiq,groups = "nand cs1";
+					lantiq,function = "ebu";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rgmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		reset {
+			label = "reset";
+			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+		restart {
+			label = "restart";
+			gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wireless-red {
+			label = "bthomehubv3a:red:wireless";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+		wireless-orange {
+			label = "bthomehubv3a:orange:wireless";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		wireless_blue: wireless-blue {
+			label = "bthomehubv3a:blue:wireless";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		broadband-red {
+			label = "bthomehubv3a:red:broadband";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+		broadband-orange {
+			label = "bthomehubv3a:orange:broadband";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+		};
+		broadband_blue: broadband-blue {
+			label = "bthomehubv3a:blue:broadband";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		power_red: power-red {
+			label = "bthomehubv3a:red:power";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+		power_orange: power-orange {
+			label = "bthomehubv3a:orange:power";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_blue: power-blue {
+			label = "bthomehubv3a:blue:power";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	ath9k@7000 {
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts
new file mode 100644
index 0000000000..2f75074696
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts
@@ -0,0 +1,282 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9";
+	model = "BT Home Hub 5A";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_blue;
+
+		led-dsl = &broadband_blue;
+		led-wifi = &wireless_blue;
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nand-parts@0 {
+				compatible = "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <0x1 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <3>;
+				nand-ecc-step-size = <256>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "u-boot";
+						reg = <0x0 0xa0000>;
+						read-only;
+					};
+					partition@a0000 {
+						label = "uboot-env";
+						reg = <0xa0000 0x20000>;
+						read-only;
+					};
+					partition@c0000 {
+						label = "unused";
+						reg = <0xc0000 0x40000>;
+					};
+					partition@100000 {
+						label = "ubi";
+						reg = <0x100000 0x7e80000>;
+					};
+					/*
+					 * last 512 KiB are for the bad block table, not writable
+					 */
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,output = <1>;
+					lantiq,open-drain;
+				};
+				pcie_rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+					lantiq,open-drain;
+				};
+				usb_vbus {
+					lantiq,pins = "io33";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				nand_out {
+					lantiq,groups = "nand cle", "nand ale";
+					lantiq,function = "ebu";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+				nand_cs1 {
+					lantiq,groups = "nand cs1";
+					lantiq,function = "ebu";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
+		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		restart {
+			label = "restart";
+			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		/* broadband-* is a single RGB led */
+		broadband-red {
+			label = "bthomehubv5a:red:broadband";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+		};
+		broadband-green {
+			label = "bthomehubv5a:green:broadband";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+		broadband_blue: broadband-blue {
+			label = "bthomehubv5a:blue:broadband";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		/* wireless-* is a single RGB led */
+		wireless-red {
+			label = "bthomehubv5a:red:wireless";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+		wireless-green {
+			label = "bthomehubv5a:green:wireless";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+		};
+		wireless_blue: wireless-blue {
+			label = "bthomehubv5a:blue:wireless";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		/* power-* is a single RGB led */
+		power_red: power-red {
+			label = "bthomehubv5a:red:power";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+		power_green: power-green {
+			label = "bthomehubv5a:green:power";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_blue: power-blue {
+			label = "bthomehubv5a:blue:power";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		dimmed {
+			label = "dimmed";
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@168c,002d {
+		compatible = "pci168c,002d";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+		qca,disable-5ghz;
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+		};
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <1>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@4 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+		ethernet@5 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <5>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy5: ethernet-phy@5 {
+			reg = <0x5>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN1000B.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN1000B.dts
new file mode 100644
index 0000000000..e5637efca5
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN1000B.dts
@@ -0,0 +1,171 @@
+/dts-v1/;
+
+#include "amazonse.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
+	model = "Netgear DGN1000B";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+
+		led-dsl = &dsl;
+		led-internet = &online_green;
+	};
+
+	memory@0 {
+		reg = <0x0 0x1000000>;
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				asc {
+					lantiq,groups = "asc";
+					lantiq,function = "asc";
+				};
+				keys_in {
+					lantiq,pins = "io0",/* "io25", */"io29";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <1>;
+				};
+			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs1";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		spi@E100800 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pins_spi_default>;
+
+			m25p80@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "jedec,spi-nor";
+				reg = <1 0>;
+				spi-max-frequency = <5000000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						reg = <0x0 0x20000>;
+						label = "SPI (RO) U-Boot Image";
+						read-only;
+					};
+
+					partition@20000 {
+						reg = <0x20000 0x10000>;
+						label = "ENV_MAC";
+						read-only;
+					};
+
+					partition@30000 {
+						reg = <0x30000 0x10000>;
+						label = "DPF";
+						read-only;
+					};
+
+					partition@40000 {
+						reg = <0x40000 0x10000>;
+						label = "NVRAM";
+						read-only;
+					};
+
+					partition@500000 {
+						reg = <0x50000 0x003a0000>;
+						label = "kernel";
+					};
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		dsl: dsl {
+			label = "dgn1000b:green:dsl";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		online_green: online {
+			label = "dgn1000b:green:online";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		online2 {
+			label = "dgn1000b:red:online";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		wps {
+			label = "dgn1000b:green:wps";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		power: power {
+			label = "dgn1000b:green:power";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		/*
+			power red is missing
+		*/
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dts
new file mode 100644
index 0000000000..98a2ebd98e
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "DGN3500.dtsi"
+
+/ {
+	compatible = "netgear,dgn3500", "lantiq,xway", "lantiq,ar9";
+	model = "Netgear DGN3500";
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dtsi
new file mode 100644
index 0000000000..d58d717537
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dtsi
@@ -0,0 +1,213 @@
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		bootargs = "root= console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl;
+		led-internet = &internet;
+		led-usb = &usb;
+		led-wifi = &wifi_green;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1", "req1";
+					lantiq,function = "pci";
+				};
+				pci-in {
+					lantiq,groups = "req1";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				pci-out {
+					lantiq,groups = "gnt1";
+					lantiq,output = <1>;
+					lantiq,pull = <0>;
+				};
+			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+		};
+	};
+
+	rtl8366rb {
+		compatible = "realtek,rtl8366rb";
+		gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
+
+		realtek,initvals = <
+			0x0000 0x0830
+			0x0400 0x8130
+			0x000A 0x83ED
+			0x0F51 0x0017
+			0x02F5 0x0048
+			0x02FA 0xFFDF
+			0x02FB 0xFFE0
+			0x0450 0x0000
+			0x0401 0x0000
+			0x0431 0x0960
+		>;
+	};
+
+
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		internet: internet {
+			label = "dgn3500:green:internet";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+		internet2 {
+			label = "dgn3500:red:internet";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "dgn3500:green:dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		usb: usb {
+			label = "dgn3500:green:usb";
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+		};
+		power_green: power {
+			label = "dgn3500:green:power";
+			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_red: power2 {
+			label = "dgn3500:red:power";
+			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+		};
+		wifi_green: wifi {
+			label = "dgn3500:green:wireless";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+		wifi2 {
+			label = "dgn3500:amber:wireless";
+			gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "dgn3500:green:wps";
+			gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@168c,0029 {
+		compatible = "pci168c,0029";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
+	status = "ok";
+
+	m25p80@4 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <4 0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x10000>;
+				label = "uboot";
+				read-only;
+			};
+
+			partition@10000 {
+				reg = <0x10000 0x10000>;
+				label = "uboot-env";
+				read-only;
+			};
+
+			ath9k_cal: partition@20000 {
+				reg = <0x20000 0x10000>;
+				label = "calibration";
+				read-only;
+			};
+
+			partition@50000 {
+				reg = <0x50000 0xfa0000>;
+				label = "firmware";
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500B.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500B.dts
new file mode 100644
index 0000000000..d1d788cc7d
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500B.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "DGN3500.dtsi"
+
+/ {
+	compatible = "netgear,dgn3500b", "lantiq,xway", "lantiq,ar9";
+	model = "Netgear DGN3500B";
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DM200.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DM200.dts
new file mode 100644
index 0000000000..3c8a2a1fa9
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DM200.dts
@@ -0,0 +1,215 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9";
+	model = "Netgear DM200";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_amber;
+		led-running = &power_green;
+
+		led-dsl = &dsl_green;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+			};
+
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk", "spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		pcie@d900000 {
+			status = "disabled";
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware = "lantiq/xrx200_phy22f_a22.bin";
+		phys = [ 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		reset {
+			label = "reset";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		annexa {
+			gpio-export,name = "annexa";
+			gpio-export,output = <0>;
+			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+		};
+		annexb {
+			gpio-export,name = "annexb";
+			gpio-export,output = <0>;
+			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_amber: power_amber {
+			label = "dm200:amber:power";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+		power_green: power_green {
+			label = "dm200:green:power";
+			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan_amber {
+			label = "dm200:amber:lan";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		};
+		lan_green {
+			label = "dm200:green:lan";
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		dsl_amber {
+			label = "dm200:amber:dsl";
+			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		};
+		dsl_green: dsl_green {
+			label = "dm200:green:dsl";
+			gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
+	status = "ok";
+
+	m25p80@4 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <4 0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x20000>;
+				label = "uboot";
+				read-only;
+			};
+
+			partition@20000 {
+				reg = <0x20000 0x10000>;
+				label = "gphyfirmware";
+				read-only;
+			};
+
+			partition@30000 {
+				reg = <0x30000 0x7b0000>;
+				label = "firmware";
+			};
+
+			partition@7e0000 {
+				reg = <0x7e0000 0x10000>;
+				label = "sysconfig";
+				read-only;
+			};
+
+			partition@7f0000 {
+				reg = <0x7f0000 0x2000>;
+				label = "ubootconfig";
+				read-only;
+			};
+
+			partition@7f2000 {
+				reg = <0x7f2000 0x1000>;
+				label = "ART";
+				read-only;
+			};
+
+			partition@7f3000 {
+				reg = <0x7f3000 0x1000>;
+				label = "pot";
+				read-only;
+			};
+
+			partition@7f4000 {
+				reg = <0x7f4000 0xc000>;
+				label = "ret";
+				read-only;
+			};
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ethernet@4 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "mii";
+			phy-handle = <&phy13>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50712.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50712.dts
new file mode 100644
index 0000000000..ebd30a7c06
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50712.dts
@@ -0,0 +1,83 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+/ {
+	compatible = "lantiq,easy50712", "lantiq,xway", "lantiq,danube";
+	model = "Intel EASY50712 Nand";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>; /* 64 KB */
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x10000 0x10000>; /* 64 KB */
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x3d0000>;
+					};
+
+					partition@400000 {
+						label = "rootfs";
+						reg = <0x400000 0x400000>;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io4", "io5", "io6"; /* stp */
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50810.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50810.dts
new file mode 100644
index 0000000000..605eb826a2
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50810.dts
@@ -0,0 +1,93 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+/ {
+	compatible = "lantiq,easy50810", "lantiq,xway", "lantiq,ar9";
+	model = "Lantiq EASY50810";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>; /* 64 KB */
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x10000 0x10000>; /* 64 KB */
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x3d0000>;
+					};
+
+					partition@400000 {
+						label = "rootfs";
+						reg = <0x400000 0x400000>;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io4", "io5", "io6"; /* stp */
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		stp0: stp@E100BB0 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-stp-xway";
+			gpio-controller;
+			reg = <0xE100BB0 0x40>;
+
+			lantiq,shadow = <0xfff>;
+			lantiq,groups = <0x3>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920.dtsi
new file mode 100644
index 0000000000..b19b9713f6
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920.dtsi
@@ -0,0 +1,298 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+
+		led-usb = &usb1;
+		led-usb2 = &usb2;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				exin3 {
+					lantiq,groups = "exin3";
+					lantiq,function = "exin";
+				};
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+				nand {
+					lantiq,groups = "nand cle", "nand ale",
+							"nand rd", "nand rdy";
+					lantiq,function = "ebu";
+				};
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				pci {
+					lantiq,groups = "gnt1", "req1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
+							"io4", "io5", "io6", /* stp */
+							"io21",
+							"io33";
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				pcie-rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				conf_in {
+					lantiq,pins = "io39", /* exin3 */
+							"io48"; /* nand rdy */
+					lantiq,pull = <2>;
+				};
+			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		stp: stp@E100BB0 {
+			compatible = "lantiq,gpio-stp-xway";
+			reg = <0xE100BB0 0x40>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			lantiq,shadow = <0xffff>;
+			lantiq,groups = <0x7>;
+			lantiq,dsl = <0x3>;
+			lantiq,phy1 = <0x7>;
+			lantiq,phy2 = <0x7>;
+			/* lantiq,rising; */
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+			lantiq,portmask = <0x3>;
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware1 = "lantiq/xrx200_phy11g_a14.bin";
+		firmware2 = "lantiq/xrx200_phy11g_a22.bin";
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+/*		reset {
+			label = "reset";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};*/
+		paging {
+			label = "paging";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PHONE>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power: power {
+			label = "easy80920:green:power";
+			gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		warning {
+			label = "easy80920:green:warning";
+			gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
+		};
+		fxs1 {
+			label = "easy80920:green:fxs1";
+			gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
+		};
+		fxs2 {
+			label = "easy80920:green:fxs2";
+			gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
+		};
+		fxo {
+			label = "easy80920:green:fxo";
+			gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
+		};
+		usb1: usb1 {
+			label = "easy80920:green:usb1";
+			gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
+		};
+		usb2: usb2 {
+			label = "easy80920:green:usb2";
+			gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
+		};
+		sd {
+			label = "easy80920:green:sd";
+			gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
+		};
+		wps {
+			label = "easy80920:green:wps";
+			gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
+	status = "ok";
+
+	m25p80@4 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <4 0>;
+		spi-max-frequency = <1000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x20000>;
+				label = "SPI (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@20000 {
+				reg = <0x20000 0x10000>;
+				label = "ENV_MAC";
+				read-only;
+			};
+
+			partition@30000 {
+				reg = <0x30000 0x10000>;
+				label = "DPF";
+				read-only;
+			};
+
+			partition@40000 {
+				reg = <0x40000 0x10000>;
+				label = "NVRAM";
+				read-only;
+			};
+
+			partition@500000 {
+				reg = <0x50000 0x003a0000>;
+				label = "kernel";
+			};
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		lantiq,switch;
+
+		ethernet@4 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <1>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+		};
+	};
+
+	wan: interface@1 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		lantiq,wan;
+
+		ethernet@5 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <5>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy5: ethernet-phy@5 {
+			reg = <0x5>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NAND.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NAND.dts
new file mode 100644
index 0000000000..095bd564da
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NAND.dts
@@ -0,0 +1,68 @@
+/dts-v1/;
+
+
+#include "EASY80920.dtsi"
+
+/ {
+	compatible = "lantiq,easy80920-nand", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
+	model = "Intel EASY80920 Nand";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1";
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			ranges = <0 0 0x4000000 0x3ffffff>;
+			nand-parts@0 {
+				compatible = "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x100000>; /* 1024 KB */
+					};
+
+					partition@100000 {
+						label = "uboot_env";
+						reg = <0x100000 0x40000>; /* 256 KB */
+					};
+
+					partition@140000 {
+						label = "ubootconfigB";
+						reg = <0x140000 0x40000>; /* 256 KB */
+					};
+
+					partition@180000 {
+						label = "gphyfirmware";
+						reg = <0x180000 0x40000>; /* 256 KB */
+					};
+
+					partition@1c0000 {
+						label = "ubi";
+						reg = <0x1c0000 0xc800000>;
+					};
+
+					partition@c9c0000 {
+						label = "calibration";
+						reg = <0xc9c0000 0x100000>;
+					};
+
+					partition@cac0000 {
+						label = "res";
+						reg = <0xcac0000 0x13540000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NOR.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NOR.dts
new file mode 100644
index 0000000000..e273138d8a
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NOR.dts
@@ -0,0 +1,43 @@
+/dts-v1/;
+
+
+#include "EASY80920.dtsi"
+
+/ {
+	compatible = "lantiq,easy80920-nor", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
+	model = "Intel EASY80920 Nor";
+
+	fpi@10000000 {
+		localbus@0 {
+			ranges = <0 0 0x0 0x3ffffff>;
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>;
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x10000 0x10000>;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x7e0000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88388.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88388.dts
new file mode 100644
index 0000000000..a9c5b3c24b
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88388.dts
@@ -0,0 +1,106 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+	model = "Lantiq Falcon FTTDP8 Reference Board";
+	compatible = "lantiq,easy88388", "lantiq,falcon";
+
+	aliases {
+		spi0 = &ebu_cs0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;  // 64M at 0x0
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <0x198>;
+		};
+	};
+
+	pinctrl {
+		led_pins: led-pins {
+			lantiq,pins = "io34", "io35", "io36", "io37", "io38", 
+					"io39", "io40", "io41";
+			lantiq,function = "gpio";
+		};
+	};
+
+	easy88388-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins &bootled_pins>;
+
+		GPON {
+			label = "easy88388:green:gpon";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		TEST {
+			label = "easy88388:green:test";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		STATUS {
+			label = "easy88388:green:status";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		ERROR {
+			label = "easy88388:red:error";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		DSL1 {
+			label = "easy88388:dsl:1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		DSL2 {
+			label = "easy88388:dsl:2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		DSL3 {
+			label = "easy88388:dsl:3";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		DSL4 {
+			label = "easy88388:dsl:4";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		DSL5 {
+			label = "easy88388:dsl:5";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		DSL6 {
+			label = "easy88388:dsl:6";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		DSL7 {
+			label = "easy88388:dsl:7";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		DSL8 {
+			label = "easy88388:dsl:8";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+	};
+};
+
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88444.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88444.dts
new file mode 100644
index 0000000000..ceb81ea13b
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88444.dts
@@ -0,0 +1,80 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+	model = "Lantiq Falcon FTTdp G.FAST Reference Board";
+	compatible = "lantiq,easy88444", "lantiq,falcon";
+
+	aliases {
+		spi0 = &ebu_cs0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;  // 64M at 0x0
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <0x198>;
+		};
+	};
+
+	pinctrl {
+		led_pins: led-pins {
+			lantiq,pins = "io34", "io35", "io37";
+			lantiq,function = "gpio";
+		};
+	};
+
+	easy88444-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins &bootled_pins>;
+
+		GPON {
+			label = "easy88444:green:gpon";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		TEST {
+			label = "easy88444:green:test";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		STATUS {
+			label = "easy88444:green:status";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		GFAST1 {
+			label = "easy88444:gfast:1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		GFAST2 {
+			label = "easy88444:gfast:2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		GFAST3 {
+			label = "easy88444:gfast:3";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		GFAST4 {
+			label = "easy88444:gfast:4";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+	};
+};
+
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000-base.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000-base.dtsi
new file mode 100644
index 0000000000..cfe1140ac1
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000-base.dtsi
@@ -0,0 +1,110 @@
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "lantiq,easy98000", "lantiq,falcon";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	easy98000-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bootled_pins>;
+
+		LED_0 {
+			label = "easy98000:green:gpon";
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		LED_1 {
+			label = "easy98000:red:gpon";
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		LED_2 {
+			label = "easy98000:green:gpon_tx";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		LED_3 {
+			label = "easy98000:green:gpon_rx";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		LED_4 {
+			label = "easy98000:green:voice";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		LED_5 {
+			label = "easy98000:green:status";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+};
+
+&ebu_cs1 {
+	eth0: ethernet@0000000 {
+		compatible = "davicom,dm9000";
+		device_type = "network";
+		reg = <0x0000003 0x1>, <0x0000001 0x1>;
+		reg-names = "addr", "data";
+		interrupt-parent = <&gpio1>;
+		#interrupt-cells = <2>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+	};
+
+	cpld@3c00000 {
+		compatible = "lantiq,easy98000_addon";
+		reg = <0x3c00000 0x2>;
+	};
+
+	cpld@3c0000c {
+		compatible = "lantiq,easy98000_cpld_led";
+		reg = <0x3c0000c 0x2>,  <0x3c00012 0x2>;
+	};
+};
+
+/* // enable this for second uart:
+&serial1 {
+	status = "okay";
+};*/
+
+&spi {
+	status = "okay";
+
+	eeprom@1 {
+		compatible = "atmel,at25", "atmel,at25160n";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+		spi-cpha;
+		spi-cpol;
+
+		pagesize = <32>;
+		size = <2048>;
+		address-width = <16>;
+	};
+};
+
+&i2c {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	/* eeprom-emulation by OMU */
+	eeprom@50 {
+		compatible = "at,24c02";
+		reg = <0x50>;
+	};
+	eeprom@51 {
+		compatible = "at,24c02";
+		reg = <0x51>;
+	};
+};
+
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NAND.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NAND.dts
new file mode 100644
index 0000000000..a40cef3931
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NAND.dts
@@ -0,0 +1,40 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "EASY98000-base.dtsi"
+
+/ {
+	model = "Lantiq Falcon (NAND)";
+	compatible = "lantiq,easy98000-nand", "lantiq,easy98000", "lantiq,falcon";
+
+	aliases {
+		spi0 = &spi;
+	};
+};
+
+&ebu_cs0 {
+	gen_nand@0 {
+		compatible = "gen_nand", "lantiq,nand-falcon";
+		bank-width = <1>;
+		reg = <0x0 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		linux,mtd-name = "gen_nand";
+		bbt-use-flash;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x00000 0x40000>;
+		};
+
+		partition@10000 {
+			label = "uboot_env";
+			reg = <0x40000 0x40000>;
+		};
+
+		partition@20000 {
+			label = "linux";
+			reg = <0x80000 0x3d0000>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NOR.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NOR.dts
new file mode 100644
index 0000000000..ad53bf96e9
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NOR.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "EASY98000-base.dtsi"
+
+/ {
+	model = "Lantiq Falcon (NOR)";
+	compatible = "lantiq,easy98000-nor", "lantiq,easy98000", "lantiq,falcon";
+
+	aliases {
+		spi0 = &spi;
+	};
+};
+
+&ebu_cs0 {
+	cfi@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0x0 0x4000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x00000 0x40000>;
+		};
+
+		partition@10000 {
+			label = "uboot_env";
+			reg = <0x40000 0x40000>;
+		};
+
+		partition@20000 {
+			label = "linux";
+			reg = <0x80000 0x3d0000>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000SFLASH.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000SFLASH.dts
new file mode 100644
index 0000000000..bbe524e94e
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000SFLASH.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "EASY98000-base.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+	model = "Lantiq Falcon (SFLASH)";
+	compatible = "lantiq,easy98000-sflash", "lantiq,easy98000", "lantiq,falcon";
+
+	aliases {
+		spi0 = &ebu_cs0;
+		spi1 = &spi;
+	};
+};
+
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020.dts
new file mode 100644
index 0000000000..c0970ef48c
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020.dts
@@ -0,0 +1,95 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+	model = "Lantiq Falcon Reference Board";
+	compatible = "lantiq,easy98020", "lantiq,falcon";
+
+	aliases {
+		spi0 = &ebu_cs0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;  // 64M at 0x0
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <0x198>;
+		};
+	};
+
+	pinctrl {
+		led_pins: phy-led-pins {
+			lantiq,pins = "io42", "io41", "io38", "io37";
+			lantiq,function = "gpio";
+		};
+	};
+
+	easy98020-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bootled_pins>;
+
+		GPON {
+			label = "easy98020:green:gpon";
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		TEST {
+			label = "easy98020:green:test";
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		ETH {
+			label = "easy98020:green:status";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		VOICE {
+			label = "easy98020:green:voice";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		VIDEO {
+			label = "easy98020:green:video";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	easy98020-phy-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		GE0_ACT {
+			label = "easy98020:ge0_act";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		GE0_LINK {
+			label = "easy98020:ge0_link";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		GE1_ACT {
+			label = "easy98020:ge1_act";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		GE1_LINK {
+			label = "easy98020:ge1_link";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020V18.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020V18.dts
new file mode 100644
index 0000000000..9aa1be91ed
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020V18.dts
@@ -0,0 +1,68 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+	model = "Lantiq Falcon Reference Board V1.8";
+	compatible = "lantiq,easy98020-v18", "lantiq,easy98020", "lantiq,falcon";
+
+	aliases {
+		spi0 = &ebu_cs0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;  // 64M at 0x0
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <0x198>;
+		};
+	};
+
+	pinctrl {
+		led_pins: led-pins {
+			lantiq,pins = "io11", "io14", "io36", "io37", "io38";
+			lantiq,function = "gpio";
+		};
+	};
+
+	easy98020-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins &bootled_pins>;
+
+		GPON {
+			label = "easy98020:green:gpon";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		TEST {
+			label = "easy98020:green:test";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		ETH {
+			label = "easy98020:green:status";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		VOICE {
+			label = "easy98020:green:voice";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		VIDEO {
+			label = "easy98020:green:video";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98021.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98021.dts
new file mode 100644
index 0000000000..7b2e490fcc
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98021.dts
@@ -0,0 +1,81 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+	model = "Lantiq Falcon HGU Reference Board";
+	compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon";
+
+	aliases {
+		spi0 = &ebu_cs0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;  // 64M at 0x0
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-mmc {
+		/* Place-holder for SIM-Card connector,
+		   to list the used GPIOs, no official binding */
+		compatible = "gpio-mmc";
+		gpios =  <&gpio0 3 GPIO_ACTIVE_HIGH>,
+			 <&gpio0 3 GPIO_ACTIVE_HIGH>,
+			 <&gpio0 2 GPIO_ACTIVE_HIGH>,
+			 <0>; /* no CS */
+		gpio-names = "di", "do", "clk", "cs";
+		reset-gpio =  <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	};
+
+	pinctrl {
+		led_pins: led-pins {
+			lantiq,pins = "io11", "io14", "io36", "io37", "io38";
+			lantiq,function = "gpio";
+		};
+	};
+
+	easy98021-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins &bootled_pins>;
+
+		GPON {
+			label = "easy98021:green:gpon";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		TEST {
+			label = "easy98021:red:test";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		ETH {
+			label = "easy98021:green:status";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		VOICE {
+			label = "easy98021:green:voice";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		SIMCARD {
+			label = "easy98021:green:simcard";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+};
+
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE.dts
new file mode 100644
index 0000000000..df941cdb67
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+	model = "Lantiq Falcon SFP Stick with SyncE";
+	compatible = "lantiq,easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon";
+
+	aliases {
+		spi0 = &ebu_cs0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;  // 64M at 0x0
+	};
+
+	pinctrl {
+		compatible = "lantiq,pinctrl-falcon";
+
+		asc0_func1: func1 {
+			func1_tx {
+				lantiq,pins = "io32";
+				lantiq,mux = <1>;
+				lantiq,input = <0>;
+			};
+			func1_rx {
+				lantiq,pins = "io33";
+				lantiq,mux = <0>;
+			};
+		};
+		asc0_func2: func2 {
+			func2_tx {
+				lantiq,pins = "io32";
+				lantiq,mux = <0>;
+			};
+			func2_rx {
+				lantiq,pins = "io33";
+				lantiq,mux = <1>;
+				lantiq,input = <0>;
+			};
+		};
+		asc0_func3: func3 {
+			func3_tx {
+				lantiq,pins = "io32";
+				lantiq,mux = <1>;
+				lantiq,input = <0>;
+			};
+			func3_rx {
+				lantiq,pins = "io33";
+				lantiq,mux = <1>;
+				lantiq,input = <0>;
+			};
+		};
+	};
+
+	pinselect-asc0 {
+		compatible = "lantiq,pinselect-asc0";
+		pinctrl-names = "asc0", "func1", "func2", "func3";
+		pinctrl-0 = <&asc0_pins>;
+		pinctrl-1 = <&asc0_func1>;
+		pinctrl-2 = <&asc0_func2>;
+		pinctrl-3 = <&asc0_func3>;
+	};
+};
+
+&serial0 {
+	pinctrl-names = "default";
+	/* use "empty" pinctrl to leave setting from u-boot enabled */
+	pinctrl-0 = < >;
+};
+
+&i2c {
+	status = "okay";
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE1588.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE1588.dts
new file mode 100644
index 0000000000..a3abc6e707
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE1588.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+	model = "Lantiq Falcon SFP Stick with SyncE/1588";
+	compatible = "lantiq,easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon";
+
+	aliases {
+		spi0 = &ebu_cs0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;  // 64M at 0x0
+	};
+
+	pinctrl {
+		compatible = "lantiq,pinctrl-falcon";
+
+		asc0_func1: func1 {
+			func1_tx {
+				lantiq,pins = "io32";
+				lantiq,mux = <1>;
+				lantiq,input = <0>;
+			};
+			func1_rx {
+				lantiq,pins = "io33";
+				lantiq,mux = <0>;
+			};
+		};
+		asc0_func2: func2 {
+			func2_tx {
+				lantiq,pins = "io32";
+				lantiq,mux = <0>;
+			};
+			func2_rx {
+				lantiq,pins = "io33";
+				lantiq,mux = <1>;
+				lantiq,input = <0>;
+			};
+		};
+		asc0_func3: func3 {
+			func3_tx {
+				lantiq,pins = "io32";
+				lantiq,mux = <1>;
+				lantiq,input = <0>;
+			};
+			func3_rx {
+				lantiq,pins = "io33";
+				lantiq,mux = <1>;
+				lantiq,input = <0>;
+			};
+		};
+	};
+
+	pinselect-asc0 {
+		compatible = "lantiq,pinselect-asc0";
+		pinctrl-names = "asc0", "func1", "func2", "func3";
+		pinctrl-0 = <&asc0_pins>;
+		pinctrl-1 = <&asc0_func1>;
+		pinctrl-2 = <&asc0_func2>;
+		pinctrl-3 = <&asc0_func3>;
+	};
+};
+
+&serial0 {
+	pinctrl-names = "default";
+	/* use "empty" pinctrl to leave setting from u-boot enabled */
+	pinctrl-0 = < >;
+};
+
+&i2c {
+	status = "okay";
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-MDU.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-MDU.dts
new file mode 100644
index 0000000000..6710bbe98e
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-MDU.dts
@@ -0,0 +1,53 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+	model = "Lantiq Falcon / Vinax MDU Board";
+	compatible = "lantiq,falcon-mdu", "lantiq,falcon";
+
+	aliases {
+		spi0 = &ebu_cs0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;  // 64M at 0x0
+	};
+
+	mdu-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bootled_pins>;
+
+		LED_0 {
+			label = "mdu:green:gpon";
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		LED_1 {
+			label = "mdu:green:status";
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		LED_2 {
+			label = "mdu:green:2";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		LED_3 {
+			label = "mdu:green:3";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		LED_4 {
+			label = "mdu:green:4";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+};
+
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-SFP.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-SFP.dts
new file mode 100644
index 0000000000..8d45de4ebe
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-SFP.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon-sflash-16M.dtsi"
+
+/ {
+	model = "Lantiq Falcon SFP Stick";
+	compatible = "lantiq,falcon-sfp", "lantiq,falcon";
+
+	aliases {
+		spi0 = &ebu_cs0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;  // 64M at 0x0
+	};
+
+	pinctrl {
+		compatible = "lantiq,pinctrl-falcon";
+
+		asc0_func1: func1 {
+			func1_tx {
+				lantiq,pins = "io32";
+				lantiq,mux = <1>;
+				lantiq,output = <0>;
+			};
+			func1_rx {
+				lantiq,pins = "io33";
+				lantiq,mux = <0>;
+			};
+		};
+		asc0_func2: func2 {
+			func2_tx {
+				lantiq,pins = "io32";
+				lantiq,mux = <0>;
+			};
+			func2_rx {
+				lantiq,pins = "io33";
+				lantiq,mux = <1>;
+				lantiq,input = <0>;
+			};
+		};
+		asc0_func3: func3 {
+			func3_tx {
+				lantiq,pins = "io32";
+				lantiq,mux = <1>;
+				lantiq,output = <0>;
+			};
+			func3_rx {
+				lantiq,pins = "io33";
+				lantiq,mux = <1>;
+				lantiq,input = <0>;
+			};
+		};
+	};
+
+	pinselect-asc0 {
+		compatible = "lantiq,pinselect-asc0";
+		pinctrl-names = "asc0", "func1", "func2", "func3";
+		pinctrl-0 = <&asc0_pins>;
+		pinctrl-1 = <&asc0_func1>;
+		pinctrl-2 = <&asc0_func2>;
+		pinctrl-3 = <&asc0_func3>;
+	};
+};
+
+&serial0 {
+	pinctrl-names = "default";
+	/* use "empty" pinctrl to leave setting from u-boot enabled */
+	pinctrl-0 = < >;
+};
+
+&i2c {
+	status = "okay";
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370.dts
new file mode 100644
index 0000000000..ef3655de61
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370.dts
@@ -0,0 +1,288 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "avm,fritz3370", "lantiq,xway", "lantiq,vr9";
+	model = "Fritz!Box WLAN 3370";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl;
+		led-internet = &info_green;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nand-parts@0 {
+				compatible = "lantiq,nand-xway";
+				bank-width = <2>;
+				reg = <1 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "kernel";
+						reg = <0x0 0x400000>;
+					};
+
+					partition@400000 {
+						label = "rootfs_ubi";
+						reg = <0x400000 0x3000000>;
+					};
+
+					partition@3400000 {
+						label = "vr9_firmware";
+						reg = <0x3400000 0x400000>;
+					};
+					partition@3800000 {
+						label = "reserved";
+						reg = <0x3800000 0x3000000>;
+					};
+					partition@6800000 {
+						label = "config";
+						reg = <0x6800000 0x200000>;
+					};
+					partition@6a00000 {
+						label = "nand-filesystem";
+						reg = <0x6a00000 0x1600000>;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				nand {
+					lantiq,groups = "nand cle", "nand ale",
+							"nand rd", "nand cs1", "nand rdy";
+					lantiq,function = "ebu";
+					lantiq,pull = <1>;
+				};
+				phy-rst {
+					lantiq,pins = "io37", "io44";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				pcie-rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 5 GPIO_ACTIVE_HIGH
+				&gpio 14 GPIO_ACTIVE_HIGH>;
+			lantiq,portmask = <0x3>;
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware = "lantiq/xrx200_phy11g_a14.bin";
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		power {
+			label = "power";
+			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+		};
+/*		wifi {
+			label = "wifi";
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <BTN_1>;
+		};*/
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_green: power {
+			label = "fritz3370:green:power";
+			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_red: power2 {
+			label = "fritz3370:red:power";
+			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+		};
+		info_red {
+			label = "fritz3370:red:info";
+			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "fritz3370:green:wlan";
+			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "fritz3370:green:dsl";
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+		lan {
+			label = "fritz3370:green:lan";
+			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+		};
+		info_green: info_green {
+			label = "fritz3370:green:info";
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
+	status = "ok";
+
+	m25p80@4 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <4 0>;
+		spi-max-frequency = <1000000>;
+
+		urlader: partition@0 {
+			reg = <0x0 0x20000>;
+			label = "urlader";
+			read-only;
+		};
+
+		partition@20000 {
+			reg = <0x20000 0x10000>;
+			label = "tffs (1)";
+			read-only;
+		};
+
+		partition@30000 {
+			reg = <0x30000 0x10000>;
+			label = "tffs (2)";
+			read-only;
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mtd-mac-address = <&urlader 0x987>;
+		mtd-mac-address-increment = <(-2)>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+			gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		};
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <1>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+			gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&pcie0 {
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+
+		wifi@0,0 {
+			compatible = "pci0,0";
+			reg = <0 0 0 0 0>;
+			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts
new file mode 100644
index 0000000000..34d0df9b3b
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts
@@ -0,0 +1,161 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
+	model = "1&1 HomeServer";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+
+		led-internet = &info_green;
+		led-dsl = &power;
+		led-wifi = &wlan;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x1000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					ath9k_cal: partition@0 {
+						label = "urlader";
+						reg = <0x00000 0x20000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0xf60000>;
+					};
+
+					partition@f80000 {
+						label = "tffs (1)";
+						reg = <0xf80000 0x40000>;
+						read-only;
+					};
+
+					partition@fc0000 {
+						label = "tffs (2)";
+						reg = <0xfc0000 0x40000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pci {
+					lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
+					lantiq,function = "pci";
+				};
+				pci-in {
+					lantiq,groups = "req1", "req2", "req3", "req4";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				pci-out {
+					lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
+					lantiq,output = <1>;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mtd-mac-address = <&ath9k_cal 0xa91>;
+			mtd-mac-address-increment = <(-2)>;
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		dect {
+			label = "dect";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PHONE>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power: power {
+			label = "fritz7320:green:power";
+			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		voice {
+			label = "fritz7320:green:fon";
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+		dect {
+			label = "fritz7320:green:dect";
+			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+		};
+		wlan: wlan {
+			label = "fritz7320:green:wlan";
+			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		};
+		info_green: info_green {
+			label = "fritz7320:green:info";
+			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+		};
+		info_red {
+			label = "fritz7320:red:info";
+			gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	req-mask = <0xf>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7360SL.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7360SL.dts
new file mode 100644
index 0000000000..b164871101
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7360SL.dts
@@ -0,0 +1,228 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "avm,fritz7360sl", "lantiq,xway", "lantiq,vr9";
+	model = "1&1 HomeServer";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &info_green;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x1000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					urlader: partition@0 {
+						label = "urlader";
+						reg = <0x00000 0x20000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0xf60000>;
+					};
+
+					partition@f80000 {
+						label = "tffs (1)";
+						reg = <0xf80000 0x40000>;
+						read-only;
+					};
+
+					partition@fc0000 {
+						label = "tffs (2)";
+						reg = <0xfc0000 0x40000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				phy-rst {
+					lantiq,pins = "io37", "io44";
+					lantiq,pull = <0>;
+					lantiq,open-drain;
+					lantiq,output = <1>;
+				};
+				pcie-rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			lantiq,portmask = <0x3>;
+		};
+
+		ifxhcd@E106000 {
+			status = "okay";
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware = "lantiq/xrx200_phy11g_a22.bin";
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		dect {
+			label = "dect";
+			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_PHONE>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WLAN>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_green: power {
+			label = "fritz7360sl:green:power";
+			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_red: power2 {
+			label = "fritz7360sl:red:power";
+			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+		};
+		info_red {
+			label = "fritz7360sl:red:info";
+			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+		};
+		info_green: info_green {
+			label = "fritz7360sl:green:info";
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "fritz7360sl:green:wlan";
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+		dect {
+			label = "fritz7360sl:green:dect";
+			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mtd-mac-address = <&urlader 0xa91>;
+		mtd-mac-address-increment = <(-2)>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rmii";
+			phy-handle = <&phy0>;
+		};
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <1>;
+			phy-mode = "rmii";
+			phy-handle = <&phy1>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0x00>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <0x01>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&pcie0 {
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+
+		wifi@168c,002e {
+			compatible = "pci168c,002e";
+			reg = <0 0 0 0 0>;
+			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/GIGASX76X.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/GIGASX76X.dts
new file mode 100644
index 0000000000..99ccbce296
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/GIGASX76X.dts
@@ -0,0 +1,122 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube";
+	model = "Gigaset SX761,SX762,SX763";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x0 0x30000>;
+					};
+
+					partition@10000 {
+						label = "uboot_env";
+						reg = <0x30000 0x10000>;
+					};
+
+					partition@40000 {
+						label = "firmware";
+						reg = <0x40000 0x7c0000>;
+					};
+				};
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x3>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+			};
+		};
+
+		gpios: stp@E100BB0 {
+			status = "okay";
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		switch {
+			gpio-export,name = "switch";
+			gpio-export,output = <1>;
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/H201L.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/H201L.dts
new file mode 100644
index 0000000000..01016f45c9
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/H201L.dts
@@ -0,0 +1,159 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "zte,h201l", "lantiq,xway", "lantiq,ar9";
+	model = "ZTE H210L";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_green;
+		led-running = &power_green;
+
+		led-dsl = &dsl;
+		led-internet = &online;
+		led-usb = &usb;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x20000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "uboot_env";
+						reg = <0x20000 0x10000>;
+						read-only;
+					};
+
+					partition@30000 {
+						label = "firmware";
+						reg = <0x30000 0x7d0000>;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rgmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_green: power {
+			label = "h201l:green:power";
+			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		online: online {
+			label = "h201l:green:internet";
+			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "h201l:green:dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		phone {
+			label = "h201l:green:phone";
+			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "h201l:green:wps";
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "h201l:green:wlan";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		usb: usb {
+			label = "h201l:green:usb";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		switch {
+			gpio-export,name = "switch";
+			gpio-export,output = <1>;
+			gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
+		};
+		usb {
+			gpio-export,name = "usb";
+			gpio-export,output = <1>;
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+		};
+		wifi {
+			gpio-export,name = "wifi";
+			gpio-export,output = <1>;
+			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts
new file mode 100644
index 0000000000..1b885ad841
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts
@@ -0,0 +1,190 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
+	model = "ZyXEL P-2601HN-Fx";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl;
+		led-internet = &online;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "uboot_env";
+						reg = <0x40000 0x20000>;
+						read-only;
+					};
+
+					partition@60000 {
+						label = "firmware";
+						reg = <0x60000 0xfa0000>;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io4", "io5", "io6";
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+				};
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		stp: stp@E100BB0 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-stp-xway";
+			gpio-controller;
+			reg = <0xE100BB0 0x40>;
+
+			lantiq,shadow = <0xfff>;
+			lantiq,groups = <0x3>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_green: power {
+			label = "p2601hnfx:green:power";
+			gpios = <&stp 11 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_red: power2 {
+			label = "p2601hnfx:red:power";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+		};
+		online: online {
+			label = "p2601hnfx:green:internet";
+			gpios = <&stp 13 GPIO_ACTIVE_LOW>;
+		};
+		online2 {
+			label = "p2601hnfx:red:internet";
+			gpios = <&stp 12 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "p2601hnfx:green:dsl";
+			gpios = <&stp 14 GPIO_ACTIVE_LOW>;
+		};
+		phone {
+			label = "p2601hnfx:green:phone";
+			gpios = <&stp 9 GPIO_ACTIVE_LOW>;
+		};
+		phone2 {
+			label = "p2601hnfx:orange:phone";
+			gpios = <&stp 8 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "p2601hnfx:green:wireless";
+			gpios = <&stp 15 GPIO_ACTIVE_LOW>;
+		};
+		wifi2 {
+			label = "p2601hnfx:orange:wireless";
+			gpios = <&stp 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		switch {
+			gpio-export,name = "switch";
+			gpio-export,output = <1>;
+			gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
+		};
+		usb {
+			gpio-export,name = "wifi";
+			gpio-export,output = <1>;
+			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF1.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF1.dts
new file mode 100644
index 0000000000..4a29cd9296
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF1.dts
@@ -0,0 +1,72 @@
+/dts-v1/;
+
+#include "P2812HNUFX.dtsi"
+
+/ {
+	compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
+	model = "ZyXEL P-2812HNU-F1";
+
+	aliases {
+		led-usb = &usb1;
+		led-usb2 = &usb2;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nand-parts@0 {
+				compatible = "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x40000>;
+					};
+					partition@40000 {
+						label = "uboot-env";
+						reg = <0x40000 0x20000>;
+					};
+					partition@60000 {
+						label = "kernel";
+						reg = <0x60000 0x200000>;
+					};
+					partition@260000 {
+						label = "ubi";
+						reg = <0x260000 0x7da0000>;
+					};
+				};
+			};
+		};
+
+		pcie@d900000 {
+			status = "disabled";
+		};
+	};
+
+	gpio-leds {
+		usb1: usb1 {
+			label = "p2812hnuf1:green:usb1";
+			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+		};
+		usb2: usb2 {
+			label = "p2812hnuf1:green:usb2";
+			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	wifi@1814,3062 {
+		compatible = "pci1814,3062";
+		reg = <0x7000 0 0 0 0>;
+		ralink,eeprom = "RT3062.eeprom";
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF3.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF3.dts
new file mode 100644
index 0000000000..d37ad0a8e5
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF3.dts
@@ -0,0 +1,66 @@
+/dts-v1/;
+
+#include "P2812HNUFX.dtsi"
+
+/ {
+	compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
+	model = "ZyXEL P-2812HNU-F3";
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x0 0x50000>;
+						read-only;
+					};
+					partition@50000 {
+						label = "uboot-env";
+						reg = <0x50000 0x10000>;
+					};
+					partition@60000 {
+						label = "unused";
+						reg = <0x60000 0x7a0000>;
+					};
+				};
+			};
+
+			nand-parts@0 {
+				compatible = "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <1 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "kernel";
+					reg = <0x0 0x200000>;
+				};
+				partition@200000 {
+					label = "ubi";
+					reg = <0x200000 0x7e00000>;
+				};
+			};
+		};
+	};
+};
+
+&pci0 {
+	wifi@1814,3092 {
+		compatible = "pci1814,3092";
+		reg = <0x7000 0 0 0 0>;
+		ralink,eeprom = "RT3092.eeprom";
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi
new file mode 100644
index 0000000000..ec3bd1033d
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi
@@ -0,0 +1,280 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl_green;
+		led-internet = &internet_green;
+		led-wifi = &wireless_green;
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				exin3 {
+					lantiq,groups = "exin3";
+					lantiq,function = "exin";
+				};
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				gphy-leds {
+					lantiq,groups = "gphy0 led1", "gphy1 led1",
+							"gphy0 led2", "gphy1 led2";
+					lantiq,function = "gphy";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				pci-in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				pci-out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <2>;
+				};
+				pcie-rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				ifxhcd-rst {
+					lantiq,pins = "io33";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				nand_out {
+					lantiq,groups = "nand cle", "nand ale";
+					lantiq,function = "ebu";
+					lantiq,output = <1>;
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+				nand_cs1 {
+					lantiq,groups = "nand cs1";
+					lantiq,function = "ebu";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		stp: stp@E100BB0 {
+			compatible = "lantiq,gpio-stp-xway";
+			reg = <0xE100BB0 0x40>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			lantiq,shadow = <0xffffff>;
+			lantiq,groups = <0x7>;
+			lantiq,dsl = <0x0>;
+			lantiq,phy1 = <0x0>;
+			lantiq,phy2 = <0x0>;
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+			lantiq,portmask = <0x3>;
+		};
+
+		ifxhcd@E106000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
+		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		internet_red {
+			label = "p2812hnufx:red:internet";
+			gpios = <&stp 16 GPIO_ACTIVE_LOW>;
+		};
+		internet_green: internet_green {
+			label = "p2812hnufx:green:internet";
+			gpios = <&stp 17 GPIO_ACTIVE_LOW>;
+		};
+		dsl_green: dsl_green {
+			label = "p2812hnufx:green:dsl";
+			gpios = <&stp 18 GPIO_ACTIVE_LOW>;
+		};
+		dsl_orange {
+			label = "p2812hnufx:orange:dsl";
+			gpios = <&stp 19 GPIO_ACTIVE_LOW>;
+		};
+		wireless_orange {
+			label = "p2812hnufx:orange:wlan";
+			gpios = <&stp 20 GPIO_ACTIVE_LOW>;
+		};
+		wireless_green: wireless_green {
+			label = "p2812hnufx:green:wlan";
+			gpios = <&stp 21 GPIO_ACTIVE_LOW>;
+		};
+		power_red: power {
+			label = "p2812hnufx:red:power";
+			gpios = <&stp 22 GPIO_ACTIVE_LOW>;
+		};
+		power_green: power2 {
+			label = "p2812hnufx:green:power";
+			gpios = <&stp 23 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		phone1 {
+			label = "p2812hnufx:green:phone";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+		phone1warn {
+			label = "p2812hnufx:orange:phone";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+		phone2warn {
+			label = "p2812hnufx:orange:phone2";
+			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+		};
+		phone2 {
+			label = "p2812hnufx:green:phone2";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mac-address = [ 00 11 22 33 44 55 ];
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+		};
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <1>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@4 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+		ethernet@5 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <5>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy5: ethernet-phy@5 {
+			reg = <0x5>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8970.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8970.dts
new file mode 100644
index 0000000000..25eb3dac67
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8970.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "TDW89X0.dtsi"
+
+/ {
+	compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
+	model = "TP-LINK TD-W8970";
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8980.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8980.dts
new file mode 100644
index 0000000000..def34b55bb
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8980.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+
+#include "TDW89X0.dtsi"
+
+/ {
+	compatible = "tplink,tdw8980", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
+	model = "TP-LINK TD-W8980";
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			state_default: pinmux {
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,output = <1>;
+					lantiq,open-drain;
+				};
+			};
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		wifi2 {
+			label = "tdw8980:green:wlan5ghz";
+			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW89X0.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW89X0.dtsi
new file mode 100644
index 0000000000..a629d92e4f
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW89X0.dtsi
@@ -0,0 +1,274 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		/* the power led can't be controlled, use the wps led instead */
+		led-boot = &wps;
+		led-failsafe = &wps;
+
+		led-dsl = &dsl;
+		led-internet = &internet;
+		led-wifi = &wifi;
+		led-usb = &usb0;
+		led-usb2 = &usb2;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				gphy-leds {
+					lantiq,groups = "gphy0 led1", "gphy1 led1";
+					lantiq,function = "gphy";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				phy-rst {
+					lantiq,pins = "io42";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				pcie-rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+			lantiq,portmask = <0x3>;
+		};
+
+		ifxhcd@E106000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware = "lantiq/xrx200_phy11g_a22.bin";
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		reset {
+			label = "reset";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RFKILL>;
+			linux,input-type = <EV_SW>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		/*
+			power is not controllable via gpio
+		*/
+		dsl: dsl {
+			label = "tdw89x0:green:dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+		};
+		internet: internet {
+			label = "tdw89x0:green:internet";
+			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+		};
+		usb0: usb0 {
+			label = "tdw89x0:green:usb";
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+		};
+		usb2: usb2 {
+			label = "tdw89x0:green:usb2";
+			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+		};
+		wps: wps {
+			label = "tdw89x0:green:wps";
+			gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	wifi-leds {
+		compatible = "gpio-leds";
+
+		wifi: wifi {
+			label = "tdw89x0:green:wifi";
+			gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
+	status = "ok";
+
+	m25p80@4 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <4 0>;
+		spi-max-frequency = <33250000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x20000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@20000 {
+				reg = <0x20000 0x7a0000>;
+				label = "firmware";
+			};
+
+			partition@7c0000 {
+				reg = <0x7c0000 0x10000>;
+				label = "config";
+				read-only;
+			};
+
+			ath9k_cal: partition@7d0000 {
+				reg = <0x7d0000 0x30000>;
+				label = "boardconfig";
+				read-only;
+			};
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mtd-mac-address = <&ath9k_cal 0xf100>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+			// gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+		};
+		ethernet@5 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <5>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy5: ethernet-phy@5 {
+			reg = <0x5>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&pcie0 {
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+
+		ath9k: wifi@168c,002e {
+			compatible = "pci168c,002e";
+			reg = <0 0 0 0 0>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			qca,no-eeprom;
+			qca,disable-5ghz;
+			mtd-mac-address = <&ath9k_cal 0xf100>;
+			mtd-mac-address-increment = <2>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts
new file mode 100644
index 0000000000..8a73de9a26
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts
@@ -0,0 +1,163 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
+	model = "BT OpenReach VDSL Modem";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl;
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			ranges = <0 0 0x0 0x3ffffff>;
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x20000>;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x20000 0x7d0000>;
+					};
+
+					partition@7f0000 {
+						label = "uboot-env";
+						reg = <0x7f0000 0x10000>;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				gphy-leds {
+					lantiq,groups = "gphy0 led0", "gphy0 led1",
+							"gphy0 led2", "gphy1 led0",
+							"gphy1 led1", "gphy1 led2";
+					lantiq,function = "gphy";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
+		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		reset {
+			label = "reset";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_red: power2 {
+			label = "vg3503j:red:power";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "vg3503j:green:dsl";
+			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+		};
+		power_green: power {
+			label = "vg3503j:green:power";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+};
+
+&eth0 {
+	interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		lantiq,switch;
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "mii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@4 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "mii";
+			phy-handle = <&phy13>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+			lantiq,led1h = <0x70>;
+			lantiq,led1l = <0x00>;
+			lantiq,led2h = <0x00>;
+			lantiq,led2l = <0x03>;
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+			lantiq,led1h = <0x70>;
+			lantiq,led1l = <0x00>;
+			lantiq,led2h = <0x00>;
+			lantiq,led2l = <0x03>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi
new file mode 100644
index 0000000000..fb4486aca2
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi
@@ -0,0 +1,253 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl;
+		led-internet = &internet_green;
+		led-wifi = &wifi;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
+					 &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
+					 &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
+		};
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x1000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					boardconfig: partition@fe0000 {
+						label = "board_config";
+						reg = <0xfe0000 0x20000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				gphy-leds {
+					lantiq,groups = "gphy0 led0", "gphy0 led1",
+							"gphy1 led0", "gphy1 led1";
+					lantiq,function = "gphy";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				pci-rst {
+					lantiq,pins = "io21";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+
+		pcie@d900000 {
+			status = "disabled";
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware1 = "lantiq/xrx200_phy22f_a14.bin";	/*VR9 1.1*/
+		firmware2 = "lantiq/xrx200_phy22f_a22.bin";	/*VR9 1.2*/
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		dsl: dsl {
+			label = "vgv7510kw22:green:dsl";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		internet_red {
+			label = "vgv7510kw22:red:internet";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		info_red {
+			label = "vgv7510kw22:red:info";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		power_green: power {
+			label = "vgv7510kw22:green:power";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		info_green {
+			label = "vgv7510kw22:green:info";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		internet_green: internet_green {
+			label = "vgv7510kw22:green:internet";
+			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi: wifi {
+			label = "vgv7510kw22:green:wlan";
+			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+		};
+
+		power_red: power2 {
+			label = "vgv7510kw22:red:power";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+		};
+
+		phone {
+			label = "vgv7510kw22:green:telefon";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mtd-mac-address = <&boardconfig 0x16>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "mii";
+			phy-handle = <&phy1>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "mii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <3>;
+			phy-mode = "mii";
+			phy-handle = <&phy12>;
+		};
+		ethernet@4 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "mii";
+			phy-handle = <&phy13>;
+		};
+		ethernet@5 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <5>;
+			phy-mode = "mii";
+			phy-handle = <&phy14>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+		};
+
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+		phy12: ethernet-phy@12 {
+			reg = <0x12>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+		phy14: ethernet-phy@14 {
+			reg = <0x14>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22BRN.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22BRN.dts
new file mode 100644
index 0000000000..d0be62f632
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22BRN.dts
@@ -0,0 +1,67 @@
+/dts-v1/;
+
+#include "VGV7510KW22.dtsi"
+
+/ {
+	compatible = "arcadyan,vgv7510kw22-brn", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
+	model = "o2 Box 6431";
+
+	sram@1F000000 {
+		cgu@103000 {
+			lantiq,phy-clk-src = <0x2>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				partitions {
+					partition@0 {
+						label = "Boot";
+						reg = <0x00000 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "Configuration";
+						reg = <0x40000 0x40000>;
+						read-only;
+					};
+
+					partition@80000 {
+						label = "Certificate";
+						reg = <0x80000 0x20000>;
+						read-only;
+					};
+
+					partition@a0000 {
+						label = "Special_Area";
+						reg = <0xa0000 0x20000>;
+						read-only;
+					};
+
+					partition@c0000 {
+						compatible = "brnboot,root-selector";
+						label = "Primary_Setting";
+						reg = <0xc0000 0x20000>;
+						read-only;
+					};
+
+					partition@e0000 {
+						label = "Code_Image_0";
+						reg = <0xe0000 0x780000>;
+						brnboot,root-id = <0x00>;
+						read-only;
+					};
+
+					partition@860000 {
+						label = "Code_Image_1";
+						reg = <0x860000 0x780000>;
+						brnboot,root-id = <0x01>;
+						read-only;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22NOR.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22NOR.dts
new file mode 100644
index 0000000000..1d21e14f0a
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22NOR.dts
@@ -0,0 +1,33 @@
+/dts-v1/;
+
+#include "VGV7510KW22.dtsi"
+
+/ {
+	compatible = "arcadyan,vgv7510kw22-nor", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
+	model = "o2 Box 6431";
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				partitions {
+					partition@0 {
+						label = "uboot";
+						reg = <0x0 0x60000>; /* 384 KiB */
+						read-only;
+					};
+
+					partition@60000 {
+						label = "uboot-env";
+						reg = <0x60000 0x20000>; /* 128 KiB */
+						read-only;
+					};
+
+					partition@80000 {
+						label = "firmware";
+						reg = <0x80000 0xf60000>; /* 15744 KiB */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519.dtsi
new file mode 100644
index 0000000000..e807b52715
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519.dtsi
@@ -0,0 +1,298 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &broadband_green;
+		led-internet = &internet_green;
+		led-wifi = &wireless_green;
+	};
+
+	sram@1F000000 {
+	        vmmc@107000 {
+	                status = "okay";
+	                gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
+	                         &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
+	                         &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
+	        };
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					boardconfig: partition@40000 {
+						label = "board_config";
+						reg = <0x40000 0x10000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+					lantiq,pull = <0>;
+				};
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				pci-rst {
+					lantiq,pins = "io21";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				gphy-leds {
+					lantiq,groups = "gphy0 led1", "gphy1 led0";
+					lantiq,function = "gphy";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		stp: stp@E100BB0 {
+			compatible = "lantiq,gpio-stp-xway";
+			reg = <0xE100BB0 0x40>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			lantiq,shadow = <0xffff>;
+			lantiq,groups = <0x3>;
+			lantiq,dsl = <0x0>;
+			lantiq,phy1 = <0x0>;
+			lantiq,phy2 = <0x0>;
+			/* lantiq,rising; */
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+			lantiq,portmask = <0x3>;
+		};
+
+		ifxhcd@E106000 {
+			status = "okay";
+			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+		};
+
+		pcie@d900000 {
+			status = "disabled";
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
+		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		reset {
+			label = "reset";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+		eco {
+			label = "eco";
+			gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		eco {
+			label = "vgv7519:blue:eco";
+			gpios = <&stp 2 GPIO_ACTIVE_LOW>;
+		};
+		wps_red {
+			label = "vgv7519:red:wps";
+			gpios = <&stp 3 GPIO_ACTIVE_LOW>;
+		};
+		wps_green {
+			label = "vgv7519:green:wps";
+			gpios = <&stp 4 GPIO_ACTIVE_LOW>;
+		};
+		upgrade {
+			label = "vgv7519:blue:upgrade";
+			gpios = <&stp 5 GPIO_ACTIVE_LOW>;
+		};
+		tv {
+			label = "vgv7519:green:tv";
+			gpios = <&stp 6 GPIO_ACTIVE_LOW>;
+		};
+		internet_green: internet_green {
+			label = "vgv7519:green:internet";
+			gpios = <&stp 7 GPIO_ACTIVE_LOW>;
+		};
+		internet_red {
+			label = "vgv7519:red:internet";
+			gpios = <&stp 8 GPIO_ACTIVE_LOW>;
+		};
+		broadband_red {
+			label = "vgv7519:red:broadband";
+			gpios = <&stp 9 GPIO_ACTIVE_LOW>;
+		};
+		broadband_green: broadband_green {
+			label = "vgv7519:green:broadband";
+			gpios = <&stp 10 GPIO_ACTIVE_LOW>;
+		};
+		voice {
+			label = "vgv7519:green:voice";
+			gpios = <&stp 11 GPIO_ACTIVE_LOW>;
+		};
+		wireless_red {
+			label = "vgv7519:red:wireless";
+			gpios = <&stp 12 GPIO_ACTIVE_LOW>;
+		};
+		wireless_green: wireless_green {
+			label = "vgv7519:green:wireless";
+			gpios = <&stp 13 GPIO_ACTIVE_LOW>;
+		};
+		power_green: power2 {
+			label = "vgv7519:green:power";
+			gpios = <&stp 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_red: power {
+			label = "vgv7519:red:power";
+			gpios = <&stp 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3091 {
+		compatible = "pci1814,3091";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+		};
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <1>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@4 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+		ethernet@5 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <5>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy5: ethernet-phy@5 {
+			reg = <0x5>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519BRN.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519BRN.dts
new file mode 100644
index 0000000000..f30d2f920e
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519BRN.dts
@@ -0,0 +1,73 @@
+/dts-v1/;
+
+
+#include "VGV7519.dtsi"
+
+/ {
+	compatible = "arcadyan,vgv7519-brn", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
+	model = "KPN Experiabox V8";
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				partitions {
+					partition@0 {
+						label = "Boot";
+						reg = <0x00000 0x40000>;
+						read-only;
+					};
+
+					partition@50000 {
+						label = "Certificate";
+						reg = <0x50000 0x10000>;
+						read-only;
+					};
+					partition@60000 {
+						label = "Special_Area";
+						reg = <0x60000 0x10000>;
+						read-only;
+					};
+
+					partition@70000 {
+						label = " Reserve_0";
+						reg = <0x70000 0x10000>;
+						read-only;
+					};
+
+					partition@80000 {
+						label = "Code_Image_0";
+						reg = <0x80000 0x780000>;
+						brnboot,root-id = <0x00>;
+						read-only;
+					};
+
+					partition@4000000 {
+						compatible = "brnboot,root-selector";
+						label = "Primary_Setting";
+						reg = <0x4000000 0x10000>;
+						read-only;
+					};
+
+					partition@4010000 {
+						label = "Configuration";
+						reg = <0x4010000 0x60000>;
+						read-only;
+					};
+
+					partition@4070000 {
+						label = " Reserve_1";
+						reg = <0x4070000 0x10000>;
+						read-only;
+					};
+
+					partition@4080000 {
+						label = "Code_Image_1";
+						reg = <0x4080000 0x780000>;
+						brnboot,root-id = <0x01>;
+						read-only;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519NOR.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519NOR.dts
new file mode 100644
index 0000000000..ec548fbe72
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519NOR.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+
+#include "VGV7519.dtsi"
+
+/ {
+	compatible = "arcadyan,vgv7519-nor", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
+	model = "KPN Experiabox V8";
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				partitions {
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x40000>;
+						read-only;
+					};
+					partition@60000 {
+						label = "uboot_env";
+						reg = <0x60000 0x10000>;
+						read-only;
+					};
+					partition@80000 {
+						label = "firmware";
+						reg = <0x80000 0xf80000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
new file mode 100644
index 0000000000..6eccc5bdd9
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
@@ -0,0 +1,283 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
+	model = "TP-LINK Archer VR200v";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+
+		led-dsl = &dsl;
+		led-internet = &internet;
+		led-usb = &usb;
+		led-usb2 = &usb;
+	};
+
+	memory@0 {
+		reg = <0x0 0x7f00000>;
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				gphy-leds {
+					lantiq,groups = "gphy0 led1", "gphy1 led1";
+					lantiq,function = "gphy";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				phy-rst {
+					lantiq,pins = "io42";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				pcie-rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+			lantiq,portmask = <0x3>;
+		};
+
+		ifxhcd@E106000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		};
+
+		pci0: pci@E105400 {
+			status = "okay";
+			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware = "lantiq/xrx200_phy11g_a22.bin";
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		reset {
+			label = "reset";
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RFKILL>;
+			linux,input-type = <EV_SW>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		dect_paging {
+			label = "dect_paging";
+			gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PHONE>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power: power {
+			label = "vr200v:blue:power";
+			gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "vr200v:blue:dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		internet: internet {
+			label = "vr200v:blue:internet";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		usb: usb {
+			label = "vr200v:blue:usb";
+			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+		};
+		eth {
+			label = "vr200v:blue:lan";
+			gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+		};
+		wlan {
+			label = "vr200v:blue:wlan";
+			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+		};
+		wlan5g {
+			label = "vr200v:blue:wlan5g";
+			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+		};
+		phone {
+			label = "vr200v:blue:phone";
+			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
+	status = "ok";
+
+	m25p80@4 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <4 0>;
+		spi-max-frequency = <33250000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x20000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@20000 {
+				reg = <0x20000 0xf90000>;
+				label = "firmware";
+			};
+
+			partition@fb0000 {
+				reg = <0xfb0000 0x10000>;
+				label = "radioDECT";
+				read-only;
+			};
+
+			partition@fc0000 {
+				reg = <0xfc0000 0x10000>;
+				label = "config";
+				read-only;
+			};
+
+			romfile: partition@fd0000 {
+				reg = <0xfd0000 0x10000>;
+				label = "romfile";
+				read-only;
+			};
+
+			partition@fe0000 {
+				reg = <0xfe0000 0x10000>;
+				label = "rom";
+				read-only;
+			};
+
+			partition@ff0000 {
+				reg = <0xff0000 0x10000>;
+				label = "radio";
+				read-only;
+			};
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mtd-mac-address = <&romfile 0xf100>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+			// gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+		};
+		ethernet@5 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <5>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy5: ethernet-phy@5 {
+			reg = <0x5>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR.dts
new file mode 100644
index 0000000000..fab99d00e7
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR.dts
@@ -0,0 +1,185 @@
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9";
+	model = "Buffalo WBMR-HP-G300H";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+
+		led-dsl = &dsl;
+		led-internet = &online_green;
+		led-usb = &usb;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "uboot_env";
+						reg = <0x40000 0x20000>;
+						read-only;
+					};
+
+					partition@20000 {
+						label = "firmware";
+						reg = <0x60000 0x1f20000>;
+					};
+
+					boardconfig: partition@1fc0000 {
+						label = "board";
+						reg = <0x1fc0000 0x20000>;
+						read-only;
+					};
+
+					partition@1fe0000 {
+						label = "calibration";
+						reg = <0x1fe0000 0x20000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pci-in {
+					lantiq,groups = "req1";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				pci-out {
+					lantiq,groups = "gnt1";
+					lantiq,output = <1>;
+					lantiq,pull = <0>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rgmii";
+			mtd-mac-address = <&boardconfig 0x10024>;
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+		eject {
+			label = "eject";
+			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_EJECTCD>;
+		};
+		movie {
+			label = "movie";
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VIDEO>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		power_green: power {
+			label = "wbmr:green:power";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		power_red: power2 {
+			label = "wbmr:red:power";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		security {
+			label = "wbmr:yellow:security";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "wbmr:green:wireless";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "wbmr:green:dsl";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+		online_green: online {
+			label = "wbmr:green:internet";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+		online2 {
+			label = "wbmr:red:internet";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+		movie {
+			label = "wbmr:blue:movie";
+			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+		};
+		usb: usb {
+			label = "wbmr:green:usb";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR300.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR300.dts
new file mode 100644
index 0000000000..2ecfe4bc92
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR300.dts
@@ -0,0 +1,306 @@
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
+	model = "Buffalo WBMR-300HPD";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_g;
+		led-failsafe = &diag_r;
+		led-running = &power_g;
+
+		led-dsl = &dsl;
+		led-internet = &router_g;
+		led-wifi = &wifi_g;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				phy-rst {
+					lantiq,pins = "io42";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				pcie-rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+			lantiq,portmask = <0x3>;
+		};
+
+		ifxhcd@E106000 {
+			status = "okay";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware = "lantiq/xrx200_phy22f_a22.bin";
+		phys = [ 00 01 ];
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		power {
+			label = "power";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		auto {
+			label = "auto";
+			gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		router {
+			label = "router";
+			gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		diag_r: diag_r {
+			label = "wbmr300:red:diag";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default_state = "off";
+		};
+
+		wifi_g: wifi_g {
+			label = "wbmr300:green:wifi";
+			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		dsl: dsl {
+			label = "dsl";
+			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		router_y: router_y {
+			label = "wbmr300:yellow:router";
+			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		wifi_y: wifi_y {
+			label = "wbmr300:yellow:wifi";
+			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan1: lan1 {
+			label = "wbmr300:green:lan1";
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan: wan {
+			label = "wbmr300:green:wan";
+			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan3: lan3 {
+			label = "wbmr300:green:lan3";
+			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan2: lan2 {
+			label = "wbmr300:green:lan2";
+			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		};
+
+		internet_g: internet_g {
+			label = "wbmr300:green:internet";
+			gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
+		};
+
+		internet_y: internet_y {
+			label = "wbmr300:yellow:internet";
+			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		};
+
+		router_g: router_g {
+			label = "wbmr300:green:router";
+			gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_g: power_g {
+			label = "wbmr300:green:power";
+			gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
+	status = "ok";
+	m25p80@4 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <4 0>;
+		spi-max-frequency = <20000000>;
+
+		partition@0 {
+			reg = <0x0 0x10000>;
+			label = "u-boot";
+			read-only;
+		};
+
+		partition@10000 {
+			reg = <0x10000 0x10000>;
+			label = "gphyfirmware";
+			read-only;
+		};
+
+		partition@20000 {
+			reg = <0x20000 0x80000>;
+			label = "dsl_fw";
+		};
+
+		partition@de0000 {
+			reg = <0xa0000 0xf40000>;
+			label = "firmware";
+		};
+
+		partition@fe0000 {
+			reg = <0xfe0000 0x10000>;
+			label = "sysconfig";
+			read-only;
+		};
+
+		partition@ff0000 {
+			reg = <0xff0000 0x2000>;
+			label = "ubootconfig";
+		};
+
+		partition@ff3000 {
+			reg = <0xff3000 0x2000>;
+			label = "board_config";
+			read-only;
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		lantiq,switch;
+
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "mii";
+			phy-handle = <&phy13>;
+		};
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <5>;
+			phy-mode = "mii";
+			phy-handle = <&phy14>;
+		};
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "mii";
+			phy-handle = <&phy11>;
+		};
+		ethernet@4 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <3>;
+			phy-mode = "mii";
+			phy-handle = <&phy12>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+		phy12: ethernet-phy@12 {
+			reg = <0x12>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+		phy14: ethernet-phy@14 {
+			reg = <0x14>;
+			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/amazonse.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/amazonse.dtsi
new file mode 100644
index 0000000000..e6925a3adf
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/amazonse.dtsi
@@ -0,0 +1,174 @@
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,ase";
+
+	aliases {
+		serial0 = &asc1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips4Kc";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x28
+				0x80228 0x28
+				0x80250 0x28
+				0x80278 0x28
+				0x802a0 0x28>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+
+	sram@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram", "simple-bus";
+		reg = <0x1F000000 0x800000>;
+		ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+			interrupt-parent = <&icu0>;
+			lantiq,eiu-irqs = <29 30 31>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xway";
+			reg = <0x203000 0x1000>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+		};
+
+		spi@E100800 {
+			compatible = "lantiq,ase-spi";
+			reg = <0xE100800 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <24 25 26>;
+			interrupt-names = "spi_rx", "spi_tx", "spi_err",
+					"spi_frm";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		gptu@E100A00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xE100A00 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <33 34 35 36 37 38>;
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,ase-pinctrl";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+		};
+
+		asc1: serial@E100C00 {
+			compatible = "lantiq,asc";
+			reg = <0xE100C00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <72 74 75>;
+		};
+
+		mei@E116000 {
+			compatible = "lantiq,mei-xway";
+			interrupt-parent = <&icu0>;
+			interrupts = <81>;
+		};
+
+		ifxhcd@E101000 {
+			compatible = "lantiq,ase-usb", "lantiq,ifxhcd-ase";
+			reg = <0xE101000 0x1000
+				0xE120000 0x3f000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <39>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		dma0: dma@E104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xE104100 0x800>;
+		};
+
+		ebu0: ebu@E105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xE105300 0x100>;
+		};
+
+		ppe@E234000 {
+			compatible = "lantiq,ppe-ase";
+			interrupt-parent = <&icu0>;
+			interrupts = <85>;
+		};
+
+		etop@E180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xE180000 0x40000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <105 109>;
+		};
+	};
+
+	adsl {
+		compatible = "lantiq,adsl-ase";
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ar9.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ar9.dtsi
new file mode 100644
index 0000000000..2638a4b268
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ar9.dtsi
@@ -0,0 +1,216 @@
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,ar9";
+
+	aliases {
+		serial0 = &asc1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips34K";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x28
+				0x80228 0x28
+				0x80250 0x28
+				0x80278 0x28
+				0x802a0 0x28>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+
+	sram@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram", "simple-bus";
+		reg = <0x1F000000 0x800000>;
+		ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+			interrupt-parent = <&icu0>;
+			lantiq,eiu-irqs = <166 135 66 40 41 42>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xway";
+			reg = <0x203000 0x1000>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+		};
+
+		gptu@E100A00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xE100A00 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <126 127 128 129 130 131>;
+		};
+
+		asc0: serial@E100400 {
+			compatible = "lantiq,asc";
+			reg = <0xE100400 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <104 105 106>;
+			status = "disabled";
+		};
+
+		spi: spi@E100800 {
+			compatible = "lantiq,xrx100-spi";
+			reg = <0xE100800 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <22 23 24>;
+			interrupt-names = "spi_rx", "spi_tx", "spi_err",
+					"spi_frm";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,xrx100-pinctrl";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+		};
+
+		asc1: serial@E100C00 {
+			compatible = "lantiq,asc";
+			reg = <0xE100C00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <112 113 114>;
+		};
+
+		ifxhcd@E101000 {
+			compatible = "lantiq,arx100-usb", "lantiq,ifxhcd-arx100";
+			reg = <0xE101000 0x1000
+				0xE120000 0x3f000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <62 91>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		ifxhcd@E106000 {
+			compatible = "lantiq,arx100-usb";
+			reg = <0xE106000 0x1000
+				0xE1E0000 0x3f000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <91>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		deu@E103100 {
+			compatible = "lantiq,deu-arx100";
+			reg = <0xE103100 0xf00>;
+		};
+
+		dma0: dma@E104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xE104100 0x800>;
+		};
+
+		ebu0: ebu@E105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xE105300 0x100>;
+		};
+
+		mei@E116000 {
+			compatible = "lantiq,mei-xway";
+			interrupt-parent = <&icu0>;
+			interrupts = <63>;
+		};
+
+		etop@E180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xE180000 0x40000
+				0xE108000 0x200>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 72>;
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		ppe@E234000 {
+			compatible = "lantiq,ppe-arx100";
+			interrupt-parent = <&icu0>;
+			interrupts = <96>;
+		};
+
+		pci0: pci@E105400 {
+			status = "disabled";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
+				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>;	/* io space */
+			reg = <0x7000000 0x8000		/* config space */
+				0xE105400 0x400>;	/* pci bridge */
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+			req-mask = <0x1>;
+		};
+	};
+
+	adsl {
+		compatible = "lantiq,adsl-arx100";
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/danube.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/danube.dtsi
new file mode 100644
index 0000000000..83e85c36a5
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/danube.dtsi
@@ -0,0 +1,212 @@
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,danube";
+
+	aliases {
+		serial0 = &asc1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24Kc";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x28
+				0x80228 0x28
+				0x80250 0x28
+				0x80278 0x28
+				0x802a0 0x28>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+
+	sram@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram", "simple-bus";
+		reg = <0x1F000000 0x800000>;
+		ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+			interrupt-parent = <&icu0>;
+			lantiq,eiu-irqs = <166 135 66>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vmmc@107000 {
+			status = "disabled";
+			compatible = "lantiq,vmmc-xway";
+			reg = <0x103000 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <150 151 152 153 154 155>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xway";
+			reg = <0x203000 0x1000>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+		};
+
+		gptu@E100A00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xE100A00 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <126 127 128 129 130 131>;
+		};
+
+		gpios: stp@E100BB0 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-stp-xway";
+			gpio-controller;
+			reg = <0xE100BB0 0x40>;
+			lantiq,shadow = <0xfff>;
+			lantiq,groups = <0x3>;
+			status = "disabled";
+		};
+
+		asc0: serial@E100400 {
+			compatible = "lantiq,asc";
+			reg = <0xE100400 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <104 105 106>;
+			status = "disabled";
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,danube-pinctrl";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+		};
+
+		asc1: serial@E100C00 {
+			compatible = "lantiq,asc";
+			reg = <0xE100C00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <112 113 114>;
+		};
+
+		ifxhcd@E101000 {
+			compatible = "lantiq,danube-usb", "lantiq,ifxhcd-danube";
+			reg = <0xE101000 0x1000
+				0xE120000 0x3f000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <62>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		deu@E103100 {
+			compatible = "lantiq,deu-danube";
+			reg = <0xE103100 0xf00>;
+		};
+
+		dma0: dma@E104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xE104100 0x800>;
+		};
+
+		ebu0: ebu@E105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xE105300 0x100>;
+		};
+
+		mei@E116000 {
+			compatible = "lantiq,mei-xway";
+			interrupt-parent = <&icu0>;
+			interrupts = <63>;
+		};
+
+		etop@E180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xE180000 0x40000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 78>;
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		ppe@E234000 {
+			compatible = "lantiq,ppe-danube";
+			interrupt-parent = <&icu0>;
+			interrupts = <96>;
+		};
+
+		pci0: pci@E105400 {
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
+				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>;	/* io space */
+			reg = <0x7000000 0x8000		/* config space */
+				0xE105400 0x400>;	/* pci bridge */
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
+			req-mask = <0x1>; /* GNT1 */
+		};
+	};
+
+	adsl {
+		compatible = "lantiq,adsl-danube";
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon-sflash-16M.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon-sflash-16M.dtsi
new file mode 100644
index 0000000000..d95acc21ef
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon-sflash-16M.dtsi
@@ -0,0 +1,37 @@
+
+&ebu_cs0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,sflash-falcon", "simple-bus";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl129p0", "spansion,s25fl129p1";
+		reg = <0 0>;
+		linux,mtd-name = "sflash";
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+
+		partition@0 {
+			reg = <0x0 0x40000>;
+			label = "uboot";
+			read-only;
+		};
+
+		partition@40000 {
+			reg = <0x40000 0x80000>;
+			label = "uboot_env";
+		};
+
+		partition@C0000 {
+			reg = <0xC0000 0x740000>;
+			label = "image0";
+		};
+
+		partition@800000 {
+			reg = <0x800000 0x800000>;
+			label = "image1";
+		};
+	};
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon.dtsi
new file mode 100644
index 0000000000..98f71819a2
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon.dtsi
@@ -0,0 +1,392 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,falcon";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips34kc";
+		};
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+
+		cpu_clk: cpu {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+			clock-output-names = "cpu";
+		};
+
+		io_clk: io {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+			clock-output-names = "io";
+		};
+
+		fpi_clk: fpi {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <100000000>;
+			clock-output-names = "fpi";
+		};
+	};
+
+	ebu_cs0: localbus@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,localbus", "simple-bus";
+		reg = <0x10000000 0x4000000>;
+		ranges = <0x0 0x10000000 0x4000000>;
+	};
+	ebu_cs1: localbus@14000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,localbus", "simple-bus";
+		reg = <0x14000000 0x4000000>;
+		ranges = <0x0 0x14000000 0x4000000>;
+	};
+
+	ebu@18000000 {
+		compatible = "lantiq,ebu-falcon";
+		reg = <0x18000000 0x100>;
+	};
+
+	sbs2@1D000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sysb2", "simple-bus";
+		reg = <0x1D000000 0x1000000>;
+		ranges = <0x0 0x1D000000 0x1000000>;
+
+		clock_sysgpe: clock-controller@700000 {
+			compatible = "lantiq,sysgpe-falcon";
+			reg = <0x700000 0x100>;
+			#clock-cells = <1>;
+		};
+
+		mps@4000 {
+			compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100";
+			reg = <0x4000 0x1000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <154 155>;
+			lantiq,mbx = <&mpsmbx>;
+		};
+
+		gpio0: gpio@810000 {
+			compatible = "lantiq,falcon-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&icu0>;
+			interrupts = <44>;
+			reg = <0x810000 0x80>;
+			clocks = <&clock_syseth 16>;
+		};
+
+		gpio2: gpio@810100 {
+			compatible = "lantiq,falcon-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&icu0>;
+			interrupts = <46>;
+			reg = <0x810100 0x80>;
+			clocks = <&clock_syseth 17>;
+		};
+
+		clock_syseth: clock-controller@B00000 {
+			compatible = "lantiq,syseth-falcon";
+			reg = <0xB00000 0x100>;
+			#clock-cells = <1>;
+		};
+
+		pad@B01000 {
+			compatible = "lantiq,pad-falcon";
+			reg = <0xB01000 0x100>;
+			lantiq,bank = <0>;
+			clocks = <&clock_syseth 20>;
+		};
+
+		pad@B02000 {
+			compatible = "lantiq,pad-falcon";
+			reg = <0xB02000 0x100>;
+			lantiq,bank = <2>;
+			clocks = <&clock_syseth 21>;
+		};
+	};
+
+	fpi@1E000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		reg = <0x1E000000 0x1000000>;
+		ranges = <0x0 0x1E000000 0x1000000>;
+
+		serial1: serial@100B00 {
+			status = "disabled";
+			compatible = "lantiq,asc";
+			reg = <0x100B00 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <112 113 114>;
+			line = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&asc1_pins>;
+			clocks = <&clock_sys1 11>;
+		};
+
+		serial0: serial@100C00 {
+			compatible = "lantiq,asc";
+			reg = <0x100C00 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <104 105 106>;
+			line = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&asc0_pins>;
+			clocks = <&clock_sys1 12>;
+		};
+
+		spi: spi@100D00 {
+			status = "disabled";
+			compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc";
+			interrupts = <22 23 24 25>;
+			interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x100D00 0x100>;
+			interrupt-parent = <&icu0>;
+			clocks = <&clock_sys1 13>;
+			base_cs = <1>;
+			num_cs = <2>;
+		};
+
+		gptc@100E00 {
+			compatible = "lantiq,gptc-falcon";
+			reg = <0x100E00 0x100>;
+		};
+
+		i2c: i2c@200000 {
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "lantiq,lantiq-i2c";
+			reg = <0x200000 0x10000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <18 19 20 21>;
+			gpios = <&gpio1 7 0 &gpio1 8 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c_pins>;
+			clocks = <&clock_sys1 14>;
+		};
+
+		gpio1: gpio@800100 {
+			compatible = "lantiq,falcon-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&icu0>;
+			interrupts = <45>;
+			reg = <0x800100 0x100>;
+			clocks = <&clock_sys1 16>;
+		};
+
+		gpio3: gpio@800200 {
+			compatible = "lantiq,falcon-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&icu0>;
+			interrupts = <47>;
+			reg = <0x800200 0x100>;
+			clocks = <&clock_sys1 17>;
+		};
+
+		gpio4: gpio@800300 {
+			compatible = "lantiq,falcon-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&icu0>;
+			interrupts = <48>;
+			reg = <0x800300 0x100>;
+			clocks = <&clock_sys1 18>;
+		};
+
+		pad@800400 {
+			compatible = "lantiq,pad-falcon";
+			reg = <0x800400 0x100>;
+			lantiq,bank = <1>;
+			clocks = <&clock_sys1 20>;
+		};
+
+		pad@800500 {
+			compatible = "lantiq,pad-falcon";
+			reg = <0x800500 0x100>;
+			lantiq,bank = <3>;
+			clocks = <&clock_sys1 21>;
+		};
+
+		pad@800600 {
+			compatible = "lantiq,pad-falcon";
+			reg = <0x800600 0x100>;
+			lantiq,bank = <4>;
+			clocks = <&clock_sys1 22>;
+		};
+
+		status@802000 {
+			compatible = "lantiq,status-falcon";
+			reg = <0x802000 0x80>;
+		};
+
+		clock_sys1: clock-controller@F00000 {
+			compatible = "lantiq,sys1-falcon";
+			reg = <0xF00000 0x100>;
+			#clock-cells = <1>;
+		};
+	};
+
+	sbs0@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0x1F000000 0x400000>;
+		ranges = <0x0 0x1F000000 0x400000>;
+
+		mpsmbx: mpsmbx@200000 {
+			reg = <0x200000 0x200>;
+		};
+	};
+
+	sbs1@1F700000 {
+
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x800000>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x28
+				0x80228 0x28
+				0x80250 0x28
+				0x80278 0x28
+				0x802a0 0x28>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+			clocks = <&io_clk>; /* currently no effect */
+		};
+	};
+
+	pinctrl {
+		compatible = "lantiq,pinctrl-falcon";
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinctrl0 {
+			/*ntr {
+				lantiq,groups = "ntr8k";
+				lantiq,function = "ntr";
+			};*/
+			hrst {
+				lantiq,groups = "hrst";
+				lantiq,function = "rst";
+			};
+		};
+
+		asc0_pins: asc0 {
+			asc0 {
+				lantiq,groups = "asc0";
+				lantiq,function = "asc";
+			};
+		};
+		asc1_pins: asc1 {
+			asc1 {
+				lantiq,groups = "asc1";
+				lantiq,function = "asc";
+			};
+		};
+		i2c_pins: i2c {
+			i2c {
+				lantiq,groups = "i2c";
+				lantiq,function = "i2c";
+			};
+		};
+		bootled_pins: bootled {
+			bootled {
+				lantiq,groups = "bootled";
+				lantiq,function = "led";
+			};
+		};
+		ntr_ntr8k: ntr8k {
+			ntr8k {
+				lantiq,groups = "ntr8k";
+				lantiq,function = "ntr";
+			};
+		};
+		ntr_pps: pps {
+			pps {
+				lantiq,groups = "pps";
+				lantiq,function = "ntr";
+			};
+		};
+		ntr_gpio: gpio {
+			gpio {
+				lantiq,pins = "io5";
+				lantiq,mux = <1>;
+				lantiq,output = <0>;
+			};
+		};
+		slic_pins: slic {
+			slic {
+				lantiq,groups = "slic";
+				lantiq,function = "slic";
+			};
+		};
+	};
+
+	pinselect-ntr {
+		compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr";
+		pinctrl-names = "ntr8k", "pps", "gpio";
+		pinctrl-0 = <&ntr_ntr8k>;
+		pinctrl-1 = <&ntr_pps>;
+		pinctrl-2 = <&ntr_gpio>;
+	};
+
+	pinselect-asc1 {
+		compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1";
+		pinctrl-names = "default", "asc1";
+		pinctrl-0 = <&slic_pins>;
+		pinctrl-1 = <&asc1_pins>;
+	};
+
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi
new file mode 100644
index 0000000000..13bb002c52
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi
@@ -0,0 +1,260 @@
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,vr9";
+
+	aliases {
+		serial0 = &asc1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips34Kc";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+	};
+
+	cputemp@0 {
+		compatible = "lantiq,cputemp";
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x28
+				0x80228 0x28
+				0x80250 0x28
+				0x80278 0x28
+				0x802a0 0x28>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+
+	sram@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram", "simple-bus";
+		reg = <0x1F000000 0x800000>;
+		ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+			interrupt-parent = <&icu0>;
+			lantiq,eiu-irqs = <166 135 66 40 41 42>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+		};
+
+		dcdc@106a00 {
+			compatible = "lantiq,dcdc-xrx200";
+			reg = <0x106a00 0x200>;
+		};
+
+		vmmc@107000 {
+			status = "disabled";
+			compatible = "lantiq,vmmc-xway";
+			reg = <0x103000 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <150 151 152 153 154 155>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xrx200";
+			reg = <0x203000 0x1000>;
+			/* irq for thermal sensor */
+			interrupt-parent = <&icu0>;
+			interrupts = <115>;
+		};
+
+		xbar0: xbar@400000 {
+			compatible = "lantiq,xbar-xway";
+			reg = <0x400000 0x1000>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+		};
+
+		gptu@E100A00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xE100A00 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <126 127 128 129 130 131>;
+		};
+
+		asc0: serial@E100400 {
+			compatible = "lantiq,asc";
+			reg = <0xE100400 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <104 105 106>;
+			status = "disabled";
+		};
+
+		spi: spi@E100800 {
+			compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
+			reg = <0xE100800 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <22 23 24>;
+			interrupt-names = "spi_rx", "spi_tx", "spi_err",
+					"spi_frm";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,xrx200-pinctrl";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+		};
+
+		asc1: serial@E100C00 {
+			compatible = "lantiq,asc";
+			reg = <0xE100C00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <112 113 114>;
+		};
+
+		deu@E103100 {
+			compatible = "lantiq,deu-xrx200";
+			reg = <0xE103100 0xf00>;
+		};
+
+		dma0: dma@E104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xE104100 0x800>;
+		};
+
+		ebu0: ebu@E105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xE105300 0x100>;
+		};
+
+		ifxhcd@E101000 {
+			status = "disabled";
+			compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200";
+			reg = <0xE101000 0x1000
+				0xE120000 0x3f000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <62 91>;
+			dr_mode = "host";
+		};
+
+		ifxhcd@E106000 {
+			status = "disabled";
+			compatible = "lantiq,xrx200-usb";
+			reg = <0xE106000 0x1000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <91>;
+			dr_mode = "host";
+		};
+
+		eth0: eth@E108000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "lantiq,xrx200-net";
+			reg = <	0xE108000 0x3000 /* switch */
+				0xE10B100 0x70 /* mdio */
+				0xE10B1D8 0x30 /* mii */
+				0xE10B308 0x30 /* pmac */
+			>;
+			interrupt-parent = <&icu0>;
+			interrupts = <75 73 72>;
+		};
+
+		mei@E116000 {
+			compatible = "lantiq,mei-xrx200";
+			reg = <0xE116000 0x9c>;
+			interrupt-parent = <&icu0>;
+			interrupts = <63>;
+		};
+
+		ppe@E234000 {
+			compatible = "lantiq,ppe-xrx200";
+			interrupt-parent = <&icu0>;
+			interrupts = <96>;
+		};
+
+		pcie0: pcie@d900000 {
+			compatible = "lantiq,pcie-xrx200";
+
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+
+			interrupt-parent = <&icu0>;
+			interrupts = <161 144>;
+
+			device_type = "pci";
+
+			gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
+		};
+
+		pci0: pci@E105400 {
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
+				0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+			reg = <0x7000000 0x8000         /* config space */
+				0xE105400 0x400>;       /* pci bridge */
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
+			req-mask = <0x1>; /* GNT1 */
+		};
+	};
+
+	vdsl {
+		compatible = "lantiq,vdsl-vrx200";
+	};
+};