lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 0 insertions, 196 deletions

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts
deleted file mode 100644
index 5606eb6e8b..0000000000
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
-	model = "ZyXEL P-2601HN-Fx";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-		led-upgrade = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &online;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power {
-			label = "p2601hnfx:green:power";
-			gpios = <&stp 11 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power2 {
-			label = "p2601hnfx:red:power";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-		};
-		online: online {
-			label = "p2601hnfx:green:internet";
-			gpios = <&stp 13 GPIO_ACTIVE_LOW>;
-		};
-		online2 {
-			label = "p2601hnfx:red:internet";
-			gpios = <&stp 12 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "p2601hnfx:green:dsl";
-			gpios = <&stp 14 GPIO_ACTIVE_LOW>;
-		};
-		phone {
-			label = "p2601hnfx:green:phone";
-			gpios = <&stp 9 GPIO_ACTIVE_LOW>;
-		};
-		phone2 {
-			label = "p2601hnfx:orange:phone";
-			gpios = <&stp 8 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "p2601hnfx:green:wireless";
-			gpios = <&stp 15 GPIO_ACTIVE_LOW>;
-		};
-		wifi2 {
-			label = "p2601hnfx:orange:wireless";
-			gpios = <&stp 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		switch {
-			gpio-export,name = "switch";
-			gpio-export,output = <1>;
-			gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinmux {
-		stp {
-			lantiq,groups = "stp";
-			lantiq,function = "stp";
-			lantiq,pull = <2>;
-			lantiq,open-drain = <0>;
-			lantiq,output = <1>;
-		};
-		exin {
-			lantiq,groups = "exin1";
-			lantiq,function = "exin";
-		};
-		pci {
-			lantiq,groups = "gnt1";
-			lantiq,function = "pci";
-		};
-		conf_out {
-			lantiq,pins = "io4", "io5", "io6";
-			lantiq,open-drain;
-			lantiq,pull = <0>;
-		};
-		mdio {
-			lantiq,groups = "mdio";
-			lantiq,function = "mdio";
-		};
-	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&gsw {
-	phy-mode = "rmii";
-};
-
-&localbus {
-	nor@0 {
-		compatible = "lantiq,nor";
-		bank-width = <2>;
-		reg = <0 0x0 0x2000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x00000 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "uboot_env";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "firmware";
-				reg = <0x60000 0xfa0000>;
-			};
-		};
-	};
-};
-
-&stp {
-	status = "okay";
-	lantiq,shadow = <0xfff>;
-	lantiq,groups = <0x3>;
-};
-
-&usb_phy0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	vbus-supply = <&usb_vbus>;
-};