lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 0 insertions, 171 deletions

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ASL56026.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ASL56026.dts
deleted file mode 100644
index 90bfcabcb5..0000000000
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ASL56026.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
-	compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
-	model = "BT OpenReach VDSL Modem";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-		led-upgrade = &power_green;
-
-		led-dsl = &dsl;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		dsl: dsl {
-			label = "asl56026:green:dsl";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-
-		/* power-* is a bicolour led */
-		power_green: power_green {
-			label = "asl56026:green:power";
-			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		power_red: power_red {
-			label = "asl56026:red:power";
-			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		power_led_blink {
-			gpio-export,name = "power_led_blink";
-			gpio-export,output = <0>;
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		lantiq,switch;
-
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "mii";
-			phy-handle = <&phy11>;
-		};
-
-		ethernet@3 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <3>;
-			phy-mode = "mii";
-			phy-handle = <&phy14>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		reg = <0>;
-
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-
-		phy14: ethernet-phy@14 {
-			reg = <0x14>;
-			compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-&gphy0 {
-	lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
-	lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinmux {
-		mdio {
-			lantiq,groups = "mdio";
-			lantiq,function = "mdio";
-		};
-	};
-};
-
-&localbus {
-	nor@0 {
-		compatible = "lantiq,nor";
-		bank-width = <2>;
-		reg = <0 0x0 0x0800000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x30000>;
-			};
-
-			partition@30000 {
-				label = "uboot_env";
-				reg = <0x30000 0x10000>;
-			};
-
-			partition@40000 {
-				label = "firmware";
-				reg = <0x40000 0x750000>;
-			};
-
-			partition@790000 {
-				label = "ddrconfig";
-				reg = <0x790000 0x70000>;
-				read-only;
-			};
-		};
-	};
-};