lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 0 insertions, 192 deletions

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV8539PW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV8539PW22.dts
deleted file mode 100644
index 1e55d81590..0000000000
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV8539PW22.dts
+++ /dev/null
@@ -1,192 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube";
-	model = "Speedport W 504V Typ A";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-		led-upgrade = &power_green;
-
-		led-dsl = &dsl_green;
-		led-internet = &online_green;
-		led-wifi = &wireless_green;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		wlan {
-			label = "wlan";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		/* key DECT is missing */
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_green: power-green {
-			label = "arv8539pw22:green:power";
-			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power-red {
-			label = "arv8539pw22:red:power";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-
-		dsl_green: dsl-green {
-			label = "arv8539pw22:green:dsl";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-
-		online_green: online-green {
-			label = "arv8539pw22:green:online";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-
-		wireless_green: wireless-green {
-			label = "arv8539pw22:green:wlan";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		/*
-			telefonie green is missing
-		*/
-	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinmux {
-		pci_in {
-			lantiq,groups = "req1";
-			lantiq,function = "pci";
-			lantiq,open-drain = <1>;
-			lantiq,pull = <2>;
-			lantiq,output = <0>;
-		};
-		pci_out {
-			lantiq,groups = "gnt1";
-			lantiq,function = "pci";
-			lantiq,output = <1>;
-		};
-		pci_rst {
-			lantiq,pins = "io21";
-			lantiq,pull = <2>;
-			lantiq,output = <1>;
-		};
-		relay {
-			lantiq,pins = "io31";
-			lantiq,output = <1>;
-		};
-	};
-};
-
-&gsw {
-	phy-mode = "mii";
-	mtd-mac-address = <&art 0x16>;
-};
-
-&localbus {
-	nor@0 {
-		compatible = "lantiq,nor";
-		bank-width = <2>;
-		reg = <0 0x0 0x800000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x00000 0x30000>;	/* 192 KiB */
-				read-only;
-			};
-
-			partition@30000 {
-				label = "uboot";
-				reg = <0x30000 0x10000>;	/* 64 KiB */
-				read-only;
-			};
-
-			partition@40000 {
-				label = "firmware";
-				reg = <0x40000 0x7B0000>;       /* 7872 KiB */
-			};
-
-			art: partition@7F0000 {
-				label = "art";
-				reg = <0x7F0000 0x10000>;       /* 64 KiB*/
-				read-only;
-			};
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	wifi@168c,0029 {
-		compatible = "pci168c,0029";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-		mtd-mac-address = <&art 0x16>;
-		mtd-mac-address-increment = <1>;
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-	vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
-	status = "okay";
-	gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};