lantiq: move dts files to thir own folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443

31 files changed, 4766 insertions, 0 deletions

diff --git a/target/linux/lantiq/dts/ACMP252.dts b/target/linux/lantiq/dts/ACMP252.dts
new file mode 100644
index 0000000000..31cb9de5a7
--- /dev/null
+++ b/target/linux/lantiq/dts/ACMP252.dts
@@ -0,0 +1,96 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ACMP252 - AudioCodes MediaPack MP-252";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 0>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x0 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "uboot_env";
+					reg = <0x20000 0x20000>;
+				};
+
+				partition@40000 {
+					label = "boardconfig";
+					reg = <0x40000 0x60000>;
+					read-only;
+				};
+
+				partition@a0000 {
+					label = "linux";
+					reg = <0xa0000 0xf20000>;
+				};
+
+				partition@fc0000 {
+					label = "sysconfig";
+					reg = <0xfc0000 0x40000>;
+				};
+
+				partition@0x1000000 {
+					label = "rootfs_data";
+					reg = <0x1000000 0x1000000>;
+				};
+
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1", "req1";
+					lantiq,function = "pci";
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 3 0>;
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		pci@E105400 {
+			status = "okay";
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV4510PW.dts b/target/linux/lantiq/dts/ARV4510PW.dts
new file mode 100644
index 0000000000..e0cd38a460
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV4510PW.dts
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ARV4510QW - Wippies Homebox";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x1000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				lantiq,noxip;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "uboot_env";
+					reg = <0x20000 0x20000>;
+					read-only;
+				};
+
+				partition@240000 {
+					label = "linux";
+					reg = <0x40000 0xf00000>;
+				};
+
+				partition@fe0000 {
+					label = "boardconfig";
+					reg = <0xfe0000 0x10000>;
+					read-only;
+				};
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0xff0016 0x6>;
+				mac-increment = <2>;
+			};
+		};
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+                                        lantiq,function = "stp";
+				};
+				exin {
+					lantiq,groups = "exin2";
+					lantiq,function = "exin";
+				};
+				pci_in {
+					lantiq,groups = "req1", "req2";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		gpios: stp@E100BB0 {
+			status = "okay";
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			interrupt-map = <
+                                0x7000 0 0 1 &icu0 30
+		                0x7800 0 0 1 &icu0 135
+			        0x7800 0 0 2 &icu0 135
+			        0x7800 0 0 3 &icu0 135
+			>;
+			gpio-reset = <&gpio 21 0>;
+			req-mask = <0x3>;
+		};
+
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV4518PWR01.dts b/target/linux/lantiq/dts/ARV4518PWR01.dts
new file mode 100644
index 0000000000..5536af56d7
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV4518PWR01.dts
@@ -0,0 +1,192 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ARV4518PWR01 - SMC7908A-ISP";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 0>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>; /* 64 KB */
+					read-only;
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>; /* 64 KB */
+					read-only;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x3d0000>;
+				};
+
+				partition@400000 {
+					label = "boardconfig";
+					reg = <0x3f0000 0x10000>;
+					read-only;
+				};
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x0>;
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x3f0016 0x6>;
+				mac-increment = <2>;
+			};
+
+			ath5k_eep {
+				compatible = "ath5k,eeprom";
+				reg = <0 0x3f0400 0x800
+					0 0x3f0016 0x6>;
+				ath,mac-increment = <1>;
+				ath,eep-swap;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				pci_in {
+					lantiq,groups = "req1", "req2";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1", "gnt2";
+					lantiq,function = "pci";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 14 0>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,internal-clock;
+			gpio-reset = <&gpio 21 0>;
+			req-mask = <0xf>;
+		};
+
+	};
+
+/*
+#define ARV4518PW_SWITCH_RESET          13
+*/
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 28 1>;
+			linux,code = <0xf7>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&gpio 3 0>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 4 1>;
+		};
+		online {
+			label = "online";
+			gpios = <&gpio 5 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 6 1>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 7 1>;
+		};
+		dsl2 {
+			label = "dsl2";
+			gpios = <&gpio 8 1>;
+		};
+		usb {
+			label = "usb";
+			gpios = <&gpio 19 1>;
+		};
+		voice {
+			label = "voice";
+			gpios = <&gpiomm 0 1>;
+		};
+		fxs1 {
+			label = "fxs1";
+			gpios = <&gpiomm 1 1>;
+		};
+		fxs2 {
+			label = "fxs2";
+			gpios = <&gpiomm 2 1>;
+		};
+		fxo {
+			label = "fxo";
+			gpios = <&gpiomm 3 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV4518PWR01A.dts b/target/linux/lantiq/dts/ARV4518PWR01A.dts
new file mode 100644
index 0000000000..cf960e006c
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV4518PWR01A.dts
@@ -0,0 +1,192 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ARV4518PWR01A - SMC7908A-ISP, Airties WAV-221";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 0>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>; /* 64 KB */
+					read-only;
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>; /* 64 KB */
+					read-only;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x3d0000>;
+				};
+
+				partition@400000 {
+					label = "boardconfig";
+					reg = <0x3f0000 0x10000>;
+					read-only;
+				};
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x0>;
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x3f0016 0x6>;
+				mac-increment = <2>;
+			};
+
+			ath5k_eep {
+				compatible = "ath5k,eeprom";
+				reg = <0 0x3f0400 0x800
+					0 0x3f0016 0x6>;
+				ath,mac-increment = <1>;
+				ath,eep-swap;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				pci_in {
+					lantiq,groups = "req1", "req2";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1", "gnt2";
+					lantiq,function = "pci";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 14 0>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			gpio-reset = <&gpio 21 0>;
+			req-mask = <0xf>;
+		};
+
+	};
+
+/*
+#define ARV4518PW_SWITCH_RESET          13
+*/
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 28 1>;
+			linux,code = <0xf7>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&gpio 3 0>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 4 1>;
+		};
+		online {
+			label = "online";
+			gpios = <&gpio 5 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 6 1>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 7 1>;
+		};
+		dsl2 {
+			label = "dsl2";
+			gpios = <&gpio 8 1>;
+		};
+		usb {
+			label = "usb";
+			gpios = <&gpio 19 1>;
+		};
+		voice {
+			label = "voice";
+			gpios = <&gpiomm 0 1>;
+		};
+		fxs1 {
+			label = "fxs1";
+			gpios = <&gpiomm 1 1>;
+		};
+		fxs2 {
+			label = "fxs2";
+			gpios = <&gpiomm 2 1>;
+		};
+		fxo {
+			label = "fxo";
+			gpios = <&gpiomm 3 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV4520PW.dts b/target/linux/lantiq/dts/ARV4520PW.dts
new file mode 100644
index 0000000000..459c238996
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV4520PW.dts
@@ -0,0 +1,200 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ARV4520PW - Easybox 800, WAV-281";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 0
+				&gpiomm 7 0>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "uboot_env";
+					reg = <0x20000 0x10000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "linux";
+					reg = <0x30000 0x3c0000>;
+				};
+
+				partition@7f0000 {
+					label = "boardconfig";
+					reg = <0x3f0000 0x10000>;
+					read-only;
+				};
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x3f0016 0x6>;
+				mac-increment = <2>;
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x400>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+                        gpios = <&gpio 28 0>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			gpio-reset = <&gpio 21 0>;
+		};
+
+	};
+
+// gpiomm 10 - switch
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+		rfkill {
+			label = "wps";
+			gpios = <&gpio 29 1>;
+			linux,code = <0x211>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		
+		power {
+			label = "power";
+			gpios = <&gpio 3 1>;
+		};
+		adsl {
+			label = "adsl";
+			gpios = <&gpio 4 1>;
+		};
+		internet {
+			label = "internet";
+			gpios = <&gpio 5 1>;
+		};
+		power2 {
+			label = "power2";
+			gpios = <&gpio 6 1>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 7 1>;
+		};
+		wps2 {
+			label = "wps2";
+			gpios = <&gpio 9 1>;
+		};
+		fxs1 {
+			label = "fxs1";
+			gpios = <&gpiomm 0 1>;
+		};
+		fxs2 {
+			label = "fxs2";
+			gpios = <&gpiomm 1 1>;
+		};
+		isdn {
+			label = "isdn";
+			gpios = <&gpiomm 2 1>;
+		};
+		fxo {
+			label = "fxo";
+			gpios = <&gpiomm 3 1>;
+		};
+		voice {
+			label = "voice";
+			gpios = <&gpiomm 4 1>;
+		};
+		usb {
+			label = "usb";
+			gpios = <&gpiomm 5 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpiomm 6 1>;
+		};
+		internet2 {
+			label = "internet2";
+			gpios = <&gpiomm 9 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV4525PW.dts b/target/linux/lantiq/dts/ARV4525PW.dts
new file mode 100644
index 0000000000..e2d386088f
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV4525PW.dts
@@ -0,0 +1,153 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ARV4525PW - Speedport W501V Typ A";
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 0>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>;
+					read-only;
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x3d0000>;
+				};
+
+				partition@400000 {
+					label = "boardconfig";
+					reg = <0x3f0000 0x10000>;
+					read-only;
+				};
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x3f0016 0x6>;
+				mac-increment = <2>;
+			};
+
+			ath5k_eep {
+				compatible = "ath5k,eeprom";
+				reg = <0 0x3f0400 0x800>;
+				ath,mac-offset = <0>;
+				ath,eep-swap;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				relay {
+					lantiq,pins = "io31";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+		};
+
+		pci@E105400 {
+			status = "okay";
+			gpio-reset = <&gpio 21 0>;
+		};
+
+	};
+
+/*
+#define ARV4525PW_PHYRESET	13
+#define ARV4525PW_RELAY		31
+*/
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 29 1>;
+			linux,code = <0x211>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		fxo {
+			label = "fxo";
+			gpios = <&gpio 4 1>;
+		};
+		fxs {
+			label = "fxs";
+			gpios = <&gpio 5 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 6 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 8 1>;
+		};
+		online {
+			/*label = "online"; - we dont have a power led, lets use this one */
+			label = "power";
+			gpios = <&gpio 9 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV452CQW.dts b/target/linux/lantiq/dts/ARV452CQW.dts
new file mode 100644
index 0000000000..bfcf51e25c
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV452CQW.dts
@@ -0,0 +1,219 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ARV452CQW - Arcor 801";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 0
+				&gpiomm 7 0>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x400000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>;
+					read-only;
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x3d0000>;
+				};
+
+				partition@3f0000 {
+					label = "boardconfig";
+					reg = <0x3f0000 0x10000>;
+					read-only;
+				};
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x3f0016 0x6>;
+				mac-increment = <2>;
+			};
+
+			ath5k_eep {
+				compatible = "ath5k,eeprom";
+				reg = <0 0x3f0400 0x800>;
+				ath,mac-offset = <0>;
+				ath,eep-swap;
+			};
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x77f>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				pci_in {
+					lantiq,groups = "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				leds {
+					lantiq,pins = "io3", "io5", "io6", "io7", "io9";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 28 0>;
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			gpio-reset = <&gpio 21 0>;
+		};
+
+	};
+
+/*
+#define ARV452CPW_SWITCH_RESET          110
+*/
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled1";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+		wps {
+			label = "wps";
+			gpios = <&gpio 11 1>;
+			linux,code = <0x101>;
+		};
+		restart {
+			label = "restart";
+			gpios = <&gpio 12 1>;
+			linux,code = <0x110>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 28 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power0 {
+			label = "power0";
+			gpios = <&gpio 3 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 4 1>;
+		};
+		isdn {
+			label = "isdn";
+			gpios = <&gpio 5 1>;
+		};
+		power1 {
+			label = "power1";
+			gpios = <&gpio 6 1>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 7 1>;
+		};
+		wps1 {
+			label = "wps1";
+			gpios = <&gpio 9 1>;
+		};
+		fxs1 {
+			label = "fxs1";
+			gpios = <&gpiomm 0 1>;
+		};
+		fxs2 {
+			label = "fxs2";
+			gpios = <&gpiomm 1 1>;
+		};
+		wps2 {
+			label = "wps2";
+			gpios = <&gpiomm 2 1>;
+		};
+		fxo {
+			label = "fxo";
+			gpios = <&gpiomm 3 1>;
+		};
+		voice {
+			label = "voice";
+			gpios = <&gpiomm 4  1>;
+		};
+		usb {
+			label = "usb";
+			gpios = <&gpiomm 5 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpiomm 6 1>;
+		};
+		dsl2 {
+			label = "dsl2";
+			gpios = <&gpiomm 8 1>;
+		};
+		dsl3 {
+			label = "dsl3";
+			gpios = <&gpiomm 9 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7518PW.dts b/target/linux/lantiq/dts/ARV7518PW.dts
new file mode 100644
index 0000000000..1439c67b20
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV7518PW.dts
@@ -0,0 +1,209 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ARV7518PW - Astoria Networks";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>; 
+					read-only;
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>; 
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x7d0000>;
+				};
+
+				partition@400000 {
+					label = "boardconfig";
+					reg = <0x7f0000 0x10000>;
+					read-only;
+				};
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x0>;
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x7f0016 0x6>;
+				mac-increment = <2>;
+			};
+
+			ath9k_eep {
+				compatible = "ath9k,eeprom";
+				reg = <0 0x7f0400 0x800
+					0 0x7f0016 0x6>;
+				ath,mac-increment = <1>;
+				ath,pci-slot = <14>;
+				ath,eep-swap;
+				ath,eep-csum;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				pci_in {
+					lantiq,groups = "req1", "req2";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1", "gnt2";
+					lantiq,function = "pci";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 14 0>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			gpio-reset = <&gpio 21 0>;
+			req-mask = <0xf>;
+		};
+
+	};
+
+/*
+#define SWITCH_RESET          13
+*/
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 25 1>;
+			linux,code = <0xf7>;
+		};
+/*		reset {
+			label = "reset";
+			gpios = <&gpio 30 1>;
+			linux,code = <0x198>;
+		};*/
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&gpio 2 0>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 4 1>;
+		};
+		online {
+			label = "online";
+			gpios = <&gpio 5 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 6 1>;
+		};
+		power2 {
+			label = "power2";
+			gpios = <&gpio 7 1>;
+		};
+		online2 {
+			label = "online2";
+			gpios = <&gpio 8 1>;
+		};
+		usb {
+			label = "usb";
+			gpios = <&gpio 19 1>;
+		};
+		voice {
+			label = "voice";
+			gpios = <&gpiomm 0 1>;
+		};
+		fxs1 {
+			label = "fxs1";
+			gpios = <&gpiomm 1 1>;
+		};
+		fxs2 {
+			label = "fxs2";
+			gpios = <&gpiomm 2 1>;
+		};
+		fxo {
+			label = "fxo";
+			gpios = <&gpiomm 3 1>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpiomm 4 1>;
+		};
+		wps2 {
+			label = "wps2";
+			gpios = <&gpiomm 5 1>;
+		};
+		wps3 {
+			label = "wps3";
+			gpios = <&gpiomm 6 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7525PW.dts b/target/linux/lantiq/dts/ARV7525PW.dts
new file mode 100644
index 0000000000..00f73562e5
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV7525PW.dts
@@ -0,0 +1,142 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ARV7525PW - Speedport W303V Typ A";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpio 31 0>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>;
+					read-only;
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x3d0000>;
+				};
+
+				partition@400000 {
+					label = "board_config";
+					reg = <0x3f0000 0x10000>;
+					read-only;
+				};
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x3f0016 0x6>;
+				mac-increment = <2>;
+			};
+
+			ralink_eep {
+				compatible = "ralink,eeprom";
+				ralink,eeprom = "RT2860.eeprom";
+				reg = <0 0x3f0410 0x110>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1", "req1";
+					lantiq,function = "pci";
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+		};
+
+		pci@E105400 {
+			status = "okay";
+			interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
+			req-mask = <0x1>;
+		};
+
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 29 1>;
+			linux,code = <0x211>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&gpio 3 1>;
+		};
+		power1 {
+			label = "power1";
+			gpios = <&gpio 4 1>;
+		};
+		online {
+			label = "online";
+			gpios = <&gpio 5 1>;
+		};
+		voice {
+			label = "voice";
+			gpios = <&gpio 6 1>;
+		};
+		voice2 {
+			label = "voice2";
+			gpios = <&gpio 8 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 9 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV752DPW.dts b/target/linux/lantiq/dts/ARV752DPW.dts
new file mode 100644
index 0000000000..7254f5ce73
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV752DPW.dts
@@ -0,0 +1,219 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ARV752DPW - Arcor 802";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpiomm 1 0>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>;
+					read-only;
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x7d0000>;
+				};
+
+				partition@7f0000 {
+					label = "board_config";
+					reg = <0x7f0000 0x10000>;
+					read-only;
+				};
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x7f0016 0x6>;
+				mac-increment = <2>;
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <0x3>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_in {
+					lantiq,groups = "req2", "req1";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				leds {
+					lantiq,pins = "io3", "io5", "io6", "io8";
+					lantiq,output = <1>;
+					lantiq,pull = <0>;
+				};
+				keys {
+					lantiq,pins = "io11", "io12", "io13", "io28";
+					lantiq,output = <0>;
+					lantiq,pull = <2>;
+					lantiq,open-drain = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpiomm 0 0>;
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			gpio-reset = <&gpio 21 0>;
+			interrupt-map = <0x7000 0 0 1 &icu0 135>;
+			req-mask = <0x3>;
+		};
+
+	};
+
+	ralink_eep {
+		compatible = "ralink,eeprom";
+		ralink,eeprom = "RT2860.eeprom";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+	/*	wps {
+			label = "wps";
+			gpios = <&gpio 11 1>;
+			linux,code = <0x211>;
+		};*/
+		restart {
+			label = "restart";
+			gpios = <&gpio 12 0>;
+			linux,code = <0x110>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 13 0>;
+			linux,code = <0x111>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 28 0>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&gpio 3 1>;
+		};
+		message {
+			label = "message";
+			gpios = <&gpio 5 1>;
+		};
+		power1 {
+			label = "power1";
+			gpios = <&gpio 6 1>;
+		};
+		voice1 {
+			label = "voice1";
+			gpios = <&gpio 8 1>;
+		};
+		microphone {
+			/* use this led as te usb led */
+			label = "usb";
+			gpios = <&gpiomm 3 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpiomm 4 1>;
+		};
+		fxs1 {
+			label = "fxs1";
+			gpios = <&gpiomm 5 1>;
+		};
+		fx2 {
+			label = "fxs2";
+			gpios = <&gpiomm 6 1>;
+		};
+		fxo {
+			label = "fxo";
+			gpios = <&gpiomm 7 1>;
+		};
+		internet {
+			label = "internet";
+			gpios = <&gpiomm 8 1>;
+		};
+		voice2 {
+			label = "voice2";
+			gpios = <&gpiomm 9 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV752DPW22.dts b/target/linux/lantiq/dts/ARV752DPW22.dts
new file mode 100644
index 0000000000..1300a5d892
--- /dev/null
+++ b/target/linux/lantiq/dts/ARV752DPW22.dts
@@ -0,0 +1,242 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	model = "ARV752DPW22 - Arcor 803";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	sram@1F000000 {
+		vmmc@107000 {
+			status = "okay";
+			gpios = <&gpiomm 1 0>;
+		};
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>;
+					read-only;
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x7d0000>;
+				};
+
+				partition@7f0000 {
+					label = "board_config";
+					reg = <0x7f0000 0x10000>;
+					read-only;
+				};
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x7f0016 0x6>;
+				mac-increment = <2>;
+			};
+
+			gpiomm: gpiomm@4000000 {
+				compatible = "lantiq,gpio-mm";
+				reg = <1 0x0 0x10 >;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				lantiq,shadow = <3>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				ebu {
+					lantiq,groups = "ebu cs1";
+					lantiq,function = "ebu";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_in {
+					lantiq,groups = "req1", "req2";
+					lantiq,function = "pci";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+					lantiq,output = <0>;
+				};
+				pci_out {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+					lantiq,output = <1>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <2>;
+					lantiq,output = <1>;
+				};
+				leds {
+					lantiq,pins = "io3", "io5", "io6", "io8";
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpiomm 0 0>;
+		};
+
+		etop@E180000 {
+			phy-mode = "rmii";
+		};
+
+		pci@E105400 {
+			status = "okay";
+			lantiq,external-clock;
+			interrupt-map = <
+                                0x7000 0 0 1 &icu0 30
+		                0x7800 0 0 1 &icu0 135
+			        0x7800 0 0 2 &icu0 135
+			        0x7800 0 0 3 &icu0 135
+			>;
+			gpio-reset = <&gpio 21 0>;
+			req-mask = <0x3>;
+		};
+
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+		wps {
+			label = "wps";
+			gpios = <&gpio 11 1>;
+			linux,code = <0x211>;
+		};
+		restart {
+			label = "restart";
+			gpios = <&gpio 12 1>;
+			linux,code = <0x110>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 13 1>;
+			linux,code = <0x111>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 28 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&gpio 3 1>;
+			default-state = "on";
+		};
+		message {
+			label = "message";
+			gpios = <&gpio 5 1>;
+			default-state = "on";
+		};
+		power1 {
+			label = "power1";
+			gpios = <&gpio 6 1>;
+			default-state = "on";
+		};
+		voice1 {
+			label = "voice1";
+			gpios = <&gpio 8 1>;
+			default-state = "on";
+		};
+		microphone {
+			label = "microphone";
+			gpios = <&gpiomm 3 1>;
+			default-state = "on";
+		};
+		wifi {
+			label = "wifi_rt";
+			gpios = <&gpiomm 4 1>;
+			default-state = "on";
+		};
+		fxs1 {
+			label = "fxs1";
+			gpios = <&gpiomm 5 1>;
+			default-state = "on";
+		};
+		fxs2 {
+			label = "fxs2";
+			gpios = <&gpiomm 6 1>;
+			default-state = "on";
+		};
+		fxo {
+			label = "fxo";
+			gpios = <&gpiomm 7 1>;
+			default-state = "on";
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpiomm 8 1>;
+			default-state = "on";
+		};
+		voice2 {
+			label = "voice2";
+			gpios = <&gpiomm 9 1>;
+			default-state = "on";
+		};
+		eth1 {
+			 label = "eth1";
+			 gpios = <&gpiomm 11 1>;
+			 default-state = "on";
+		};
+		eth2 {
+			label = "eth2";
+			gpios = <&gpiomm 12 1>;
+			default-state = "on";
+		};
+		eth3 {
+			label = "eth3";
+			gpios = <&gpiomm 13 1>;
+			default-state = "on";
+		};
+		eth4 {
+			label = "eth4";
+			gpios = <&gpiomm 14 1>;
+			default-state = "on";
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/DGN1000B.dts b/target/linux/lantiq/dts/DGN1000B.dts
new file mode 100644
index 0000000000..782ba6e38c
--- /dev/null
+++ b/target/linux/lantiq/dts/DGN1000B.dts
@@ -0,0 +1,138 @@
+/dts-v1/;
+
+/include/ "amazonse.dtsi"
+
+/ {
+	model = "DGN1000B - Netgear DGN1000B";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x1000000>;
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				spi {
+					lantiq,groups = "spi", "spi_cs1";
+					lantiq,function = "spi";
+				};
+				asc {
+					lantiq,groups = "asc";
+					lantiq,function = "asc";
+				};
+				keys_in {
+					lantiq,pins = "io0",/* "io25", */"io29";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		spi@E100800 {
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l3205d";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l64";
+				spi-max-frequency = <5000000>;
+
+				partition@0 {
+					reg = <0x0 0x20000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+	
+				partition@20000 {
+					reg = <0x20000 0x10000>;
+					label = "ENV_MAC";
+					read-only;
+				};
+
+				partition@30000 {
+					reg = <0x30000 0x10000>;
+					label = "DPF";
+					read-only;
+				};
+
+				partition@40000 {
+					reg = <0x40000 0x10000>;
+					label = "NVRAM";
+					read-only;
+				};
+
+				partition@500000 {
+					reg = <0x50000 0x003a0000>;
+					label = "kernel";
+				};
+			};
+		};
+		ifxhcd@E101000 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 0 1>;
+			linux,code = <0x198>;
+		};
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 25 1>;
+			linux,code = <0xf7>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 29 1>;
+			linux,code = <0x211>;
+		};
+	};
+
+	gpio-leds {
+		cmpatible = "gpio-leds";
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 1 1>;
+			default-state = "on";
+		};
+		online {
+			label = "online";
+			gpios = <&gpio 2 1>;
+			default-state = "on";
+		};
+		online2 {
+			label = "online2";
+			gpios = <&gpio 3 1>;
+			default-state = "on";
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 4 1>;
+			default-state = "on";
+		};
+		power {
+			label = "power";
+			gpios = <&gpio 13 1>;
+			default-state = "on";
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/DGN3500.dts b/target/linux/lantiq/dts/DGN3500.dts
new file mode 100644
index 0000000000..d256871913
--- /dev/null
+++ b/target/linux/lantiq/dts/DGN3500.dts
@@ -0,0 +1,7 @@
+/dts-v1/;
+
+/include/ "DGN3500.dtsi"
+
+/ {
+	model = "DGN3500 - Netgear DGN3500";
+};
diff --git a/target/linux/lantiq/dts/DGN3500.dtsi b/target/linux/lantiq/dts/DGN3500.dtsi
new file mode 100644
index 0000000000..795e8bce0a
--- /dev/null
+++ b/target/linux/lantiq/dts/DGN3500.dtsi
@@ -0,0 +1,176 @@
+/include/ "ar9.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1", "req1";
+					lantiq,function = "pci";
+				};
+				pci-in {
+					lantiq,groups = "req1";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				pci-out {
+					lantiq,groups = "gnt1";
+					lantiq,output = <1>;
+					lantiq,pull = <0>;
+				};
+				spi-in {
+					lantiq,pins = "io16";
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				spi-out {
+					lantiq,pins = "io10", "io17", "io18", "io21";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <2>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+		};
+
+		pci@E105400 {
+			status = "okay";
+
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+			gpio-reset = <&gpio 21 0>;
+			req-mask = <0x1>; /* GNT1 */
+		};
+	};
+
+	spi {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "spi-gpio";
+		
+		gpio-miso = <&gpio 16 0>;
+		gpio-mosi = <&gpio 17 0>;
+		gpio-sck = <&gpio 18 0>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio 10 1>;
+
+		m25p80@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "s25fl129p0";
+			reg = <0 0>;
+			linux,modalias = "m25p80", "mx25l3205d";
+			spi-max-frequency = <1000000>;
+
+			partition@0 {
+				reg = <0x0 0x10000>;
+				label = "uboot";
+				read-only;
+			};
+
+			partition@10000 {
+				reg = <0x10000 0x10000>;
+				label = "uboot-env";
+				read-only;
+			};
+
+			partition@20000 {
+				reg = <0x20000 0x10000>;
+				label = "calibration";
+				read-only;
+			};
+
+			partition@50000 {
+				reg = <0x50000 0xfa0000>;
+				label = "linux";
+			};
+		};
+	};
+
+	rtl8366rb {
+		compatible = "rtl8366rb";
+		gpio-sda = <&gpio 35 0>;
+		gpio-sck = <&gpio 37 0>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 36 1>;
+			linux,code = <0xf7>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 54 1>;
+			linux,code = <0x211>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 53 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		internet {
+			label = "inernet";
+			gpios = <&gpio 2 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 4 1>;
+		};
+		usb {
+			label = "usb";
+			gpios = <&gpio 22 1>;
+		};
+		power {
+			label = "power";
+			gpios = <&gpio 34 1>;
+			default-state = "on";
+		};
+		power2 {
+			label = "power2";
+			gpios = <&gpio 39 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 51 1>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio 52 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/DGN3500B.dts b/target/linux/lantiq/dts/DGN3500B.dts
new file mode 100644
index 0000000000..71a4e58c13
--- /dev/null
+++ b/target/linux/lantiq/dts/DGN3500B.dts
@@ -0,0 +1,7 @@
+/dts-v1/;
+
+/include/ "DGN3500.dtsi"
+
+/ {
+	model = "DGN3500B - Netgear DGN3500B";
+};
diff --git a/target/linux/lantiq/dts/EASY50712.dts b/target/linux/lantiq/dts/EASY50712.dts
new file mode 100644
index 0000000000..68c17310bc
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY50712.dts
@@ -0,0 +1,113 @@
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>; /* 64 KB */
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>; /* 64 KB */
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x3d0000>;
+				};
+
+				partition@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x400000>;
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xway";
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io4", "io5", "io6"; /* stp */
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xE180000 0x40000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 78>;
+			phy-mode = "rmii";
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		stp0: stp@E100BB0 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-stp-xway";
+			gpio-controller;
+			reg = <0xE100BB0 0x40>;
+
+			lantiq,shadow = <0xfff>;
+			lantiq,groups = <0x3>;
+		};
+
+		pci@E105400 {
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+                                0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+			>;
+			gpios-reset = <&gpio 21 0>;
+			req-mask = <0x1>;		/* GNT1 */
+		};
+
+	};
+};
diff --git a/target/linux/lantiq/dts/EASY50810.dts b/target/linux/lantiq/dts/EASY50810.dts
new file mode 100644
index 0000000000..9e5fad782b
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY50810.dts
@@ -0,0 +1,114 @@
+/dts-v1/;
+
+/include/ "ar9.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>; /* 64 KB */
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>; /* 64 KB */
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x3d0000>;
+				};
+
+				partition@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x400000>;
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xr9";
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io4", "io5", "io6"; /* stp */
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xE180000 0x40000
+				0xE108000 0x200>;
+			interrupt-parent = <&icu0>;
+			interrupts = <72 73>;
+			phy-mode = "rmii";
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		stp0: stp@E100BB0 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-stp-xway";
+			gpio-controller;
+			reg = <0xE100BB0 0x40>;
+
+			lantiq,shadow = <0xfff>;
+			lantiq,groups = <0x3>;
+		};
+
+		pci@E105400 {
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+                                0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+			>;
+			gpios-reset = <&gpio 21 0>;
+			req-mask = <0x1>;		/* GNT1 */
+		};
+
+	};
+};
diff --git a/target/linux/lantiq/dts/EASY80920.dtsi b/target/linux/lantiq/dts/EASY80920.dtsi
new file mode 100644
index 0000000000..861978f5b9
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY80920.dtsi
@@ -0,0 +1,340 @@
+/include/ "vr9.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+	
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "lantiq,localbus", "simple-bus";
+			
+		};
+
+		spi@E100800 {
+			compatible = "lantiq,spi-xway-broken";
+			reg = <0xE100800 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <22 23 24>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "s25fl129p0";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l3205d";
+				spi-max-frequency = <1000000>;
+
+				partition@0 {
+					reg = <0x0 0x20000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@20000 {
+					reg = <0x20000 0x10000>;
+					label = "ENV_MAC";
+					read-only;
+				};
+
+				partition@30000 {
+					reg = <0x30000 0x10000>;
+					label = "DPF";
+					read-only;
+				};
+
+				partition@40000 {
+					reg = <0x40000 0x10000>;
+					label = "NVRAM";
+					read-only;
+				};
+
+				partition@500000 {
+					reg = <0x50000 0x003a0000>;
+					label = "kernel";
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xr9";
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+			
+			interrupt-parent = <&icu0>;
+			interrupts = <166 135 66 40 41 42 38>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+
+			state_default: pinmux {
+				exin3 {
+					lantiq,groups = "exin3";
+					lantiq,function = "exin";
+				};
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+				spi {
+					lantiq,groups = "spi", "spi_cs4";
+					lantiq,function = "spi";
+				};
+				nand {
+					lantiq,groups = "nand cle", "nand ale",
+							"nand rd", "nand rdy";
+					lantiq,function = "ebu";
+				};
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				pci {
+					lantiq,groups = "gnt1", "req1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
+							"io4", "io5", "io6", /* stp */
+							"io21",
+							"io33";
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				pcie-rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+				conf_in {
+					lantiq,pins = "io39", /* exin3 */
+							"io48"; /* nand rdy */
+					lantiq,pull = <2>;
+				};
+			};
+		};
+
+		eth@E108000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "lantiq,xrx200-net";
+			reg = <	0xE108000 0x3000 /* switch */
+				0xE10B100 0x70 /* mdio */
+				0xE10B1D8 0x30 /* mii */
+				0xE10B308 0x30 /* pmac */
+			>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 72>;
+
+			lan: interface@0 {
+				compatible = "lantiq,xrx200-pdi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				mac-address = [ 00 11 22 33 44 55 ];
+
+				ethernet@0 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <0>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy0>;
+				};
+				ethernet@1 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <1>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy1>;
+				};
+				ethernet@2 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <2>;
+					phy-mode = "gmii";
+					phy-handle = <&phy11>;
+				};
+			};
+
+			wan: interface@1 {
+				compatible = "lantiq,xrx200-pdi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+				mac-address = [ 00 11 22 33 44 56 ];
+				lantiq,wan;
+				ethernet@5 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <5>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy5>;
+				};
+			};
+
+			test: interface@2 {
+				compatible = "lantiq,xrx200-pdi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+				mac-address = [ 00 11 22 33 44 57 ];
+				ethernet@4 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <4>;
+					phynmode0 = "gmii";
+					phy-handle = <&phy13>;
+				};
+			};
+
+			mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "lantiq,xrx200-mdio";
+				phy0: ethernet-phy@0 {
+					reg = <0x0>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>; 
+				};
+				phy1: ethernet-phy@1 {
+					reg = <0x1>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>; 
+				};
+				phy5: ethernet-phy@5 {
+					reg = <0x5>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>; 
+				};
+				phy11: ethernet-phy@11 {
+					reg = <0x11>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>; 
+				};
+				phy13: ethernet-phy@13 {
+					reg = <0x13>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>; 
+				};
+			};
+		};
+
+		stp: stp@E100BB0 {
+			compatible = "lantiq,gpio-stp-xway";
+			reg = <0xE100BB0 0x40>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			lantiq,shadow = <0xffff>;
+			lantiq,groups = <0x7>;
+			lantiq,dsl = <0x3>;
+			lantiq,phy1 = <0x7>;
+			lantiq,phy2 = <0x7>;
+			/* lantiq,rising; */
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 33 0>;
+			lantiq,portmask = <0x3>;
+		};
+
+		pci@E105400 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway1";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
+				0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+			reg = <0x7000000 0x8000         /* config space */
+				0xE105400 0x400>;       /* pci bridge */
+			lantiq,bus-clock = <33333333>;
+			/*lantiq,external-clock;*/
+			lantiq,delay-hi = <0>; /* 0ns delay */
+			lantiq,delay-lo = <0>; /* 0.0ns delay */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+				>;
+			gpios-reset = <&gpio 21 0>;
+			req-mask = <0x1>;	/* GNT1 */
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware = "lantiq/vr9_phy11g_a2x.bin";
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+/*		reset {
+			label = "reset";
+			gpios = <&gpio 7 1>;
+			linux,code = <0x198>;
+		};*/
+		paging {
+			label = "paging";
+			gpios = <&gpio 11 1>;
+			linux,code = <0x100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		
+		power {
+			label = "power";
+			gpios = <&stp 9 0>;
+			default-state = "on";
+		};
+		warning {
+			label = "warning";
+			gpios = <&stp 22 0>;
+		};
+		fxs1 {
+			label = "fxs1";
+			gpios = <&stp 21 0>;
+		};
+		fxs2 {
+			label = "fxs2";
+			gpios = <&stp 20 0>;
+		};
+		fxo {
+			label = "fxo";
+			gpios = <&stp 19 0>;
+		};
+		usb1 {
+			label = "usb1";
+			gpios = <&stp 18 0>;
+		};
+		usb2 {
+			label = "usb2";
+			gpios = <&stp 15 0>;
+		};
+		sd {
+			label = "sd";
+			gpios = <&stp 14 0>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&stp 12 0>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/EASY80920NAND.dts b/target/linux/lantiq/dts/EASY80920NAND.dts
new file mode 100644
index 0000000000..afa2157247
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY80920NAND.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+
+
+/include/ "EASY80920.dtsi"
+
+/ {
+	fpi@10000000 {
+		localbus@0 {
+			ranges = <0 0 0x4000000 0x3ffffff>;
+			nand-parts@0 {
+				compatible = "gen_nand", "lantiq,nand-xway";
+				lantiq,cs = <1>;
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x40000>;
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x40000 0x40000>;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x80000 0x3f80000>;
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/EASY80920NOR.dts b/target/linux/lantiq/dts/EASY80920NOR.dts
new file mode 100644
index 0000000000..94f4cc1ec5
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY80920NOR.dts
@@ -0,0 +1,34 @@
+/dts-v1/;
+
+
+/include/ "EASY80920.dtsi"
+
+/ {
+	fpi@10000000 {
+		localbus@0 {
+			ranges = <0 0 0x0 0x3ffffff>;
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>;
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x7e0000>;
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/EASY98000NOR.dts b/target/linux/lantiq/dts/EASY98000NOR.dts
new file mode 100644
index 0000000000..46497f48d1
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98000NOR.dts
@@ -0,0 +1,65 @@
+/dts-v1/;
+
+/include/ "falcon.dtsi"
+
+/ {
+	model = "EASY98000 - Lantiq Falcon (NOR)";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+	
+	localbus@10000000 {
+		cfi@0 {
+			compatible = "lantiq,nor";
+			bank-width = <2>;
+			reg = <0x0 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000 0x40000>;
+			};
+
+			partition@10000 {
+				label = "uboot_env";
+				reg = <0x40000 0x40000>;
+			};
+
+			partition@20000 {
+				label = "linux";
+				reg = <0x80000 0x3d0000>;
+			};
+		};
+	};
+	
+	pinmux0 {
+		compatible = "lantiq,pinctrl-falcon";
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			asc0 {
+				lantiq,groups = "asc0";
+				lantiq,function = "asc";
+			};
+			ntr {
+				lantiq,groups = "ntr8k";
+				lantiq,function = "ntr";
+			};
+			i2c {
+				lantiq,groups = "i2c";
+				lantiq,function = "i2c";
+			};
+			hrst {
+				lantiq,groups = "hrst";
+				lantiq,function = "rst";
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/EASY98000SFLASH.dts b/target/linux/lantiq/dts/EASY98000SFLASH.dts
new file mode 100644
index 0000000000..47f8b47ff1
--- /dev/null
+++ b/target/linux/lantiq/dts/EASY98000SFLASH.dts
@@ -0,0 +1,74 @@
+/dts-v1/;
+
+/include/ "falcon.dtsi"
+
+/ {
+	model = "EASY98000 - Lantiq Falcon (SFLASH)";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+	
+	localbus@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sflash-falcon", "simple-bus";
+		busnum = <0>;
+
+		m25p80@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "s25fl129p0";
+			reg = <0 0>;
+			linux,modalias = "m25p80", "s25fl129p0";
+			spi-max-frequency = <10000000>;
+
+			partition@0 {
+				reg = <0x0 0x00080000>;
+				label = "SPI (RO) U-Boot Image";
+				read-only;
+			};
+	
+			partition@80000 {
+				reg = <0x00080000 0x00080000>;
+				label = "SPI (RO) DTB Image";
+				read-only;
+			};
+
+			partition@100000 {
+				reg = <0x00100000 0x00400000>;
+				label = "SPI (RO) Linux Kernel Image";
+				read-only;
+			};
+		};
+	};
+
+	pinmux0 {
+		compatible = "lantiq,pinctrl-falcon";
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			asc0 {
+				lantiq,groups = "asc0";
+				lantiq,function = "asc";
+			};
+			ntr {
+				lantiq,groups = "ntr8k";
+				lantiq,function = "ntr";
+			};
+			i2c {
+				lantiq,groups = "i2c";
+				lantiq,function = "i2c";
+			};
+			hrst {
+				lantiq,groups = "hrst";
+				lantiq,function = "rst";
+			};
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts
new file mode 100644
index 0000000000..df3089286d
--- /dev/null
+++ b/target/linux/lantiq/dts/FRITZ3370.dts
@@ -0,0 +1,278 @@
+/dts-v1/;
+
+/include/ "vr9.dtsi"
+
+/ {
+	model = "FRITZ3370 - Fritz!Box WLAN 3370";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=jffs2";
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+	
+	fpi@10000000 {
+		localbus@0 {
+			nand-parts@0 {
+				compatible = "gen_nand", "lantiq,nand-xway";
+				bank-width = <2>;
+				reg = <1 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "kernel";
+					reg = <0x00000 0x400000>;
+				};
+
+				partition@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x3000000>;
+				};
+
+				partition@3400000 {
+					label = "vr9_firmware";
+					reg = <0x3400000 0x400000>;
+				};
+				partition@3800000 {
+					label = "reserved";
+					reg = <0x3800000 0x3000000>;
+				};
+				partition@6800000 {
+					label = "config";
+					reg = <0x6800000 0x200000>;
+				};
+				partition@6a00000 {
+					label = "nand-filesystem";
+					reg = <0x6a00000 0x1600000>;
+				};
+			};
+		};
+
+		spi@E100800 {
+			compatible = "lantiq,spi-xway-broken";
+			reg = <0xE100800 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <22 23 24>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "s25fl129p0";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l3205d";
+				spi-max-frequency = <1000000>;
+
+				partition@0 {
+					reg = <0x0 0x20000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@20000 {
+					reg = <0x20000 0x10000>;
+					label = "ENV_MAC";
+					read-only;
+				};
+
+				partition@30000 {
+					reg = <0x30000 0x10000>;
+					label = "DPF";
+					read-only;
+				};
+
+				partition@40000 {
+					reg = <0x40000 0x10000>;
+					label = "NVRAM";
+					read-only;
+				};
+
+				partition@500000 {
+					reg = <0x50000 0x003a0000>;
+					label = "kernel";
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				spi {
+					lantiq,groups = "spi", "spi_cs4";
+					lantiq,function = "spi";
+				};
+				nand_out {
+					lantiq,groups = "nand cle", "nand ale",	"nand rd", "ebu a23", "ebu a24";
+					lantiq,function = "ebu";
+					lantiq,direction = <1>;
+					lantiq,pull = <0>;
+				};
+				nand_in {
+					lantiq,groups = "nand rdy";
+					lantiq,function = "ebu";
+					lantiq,direction = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+				phy-rst {
+					lantiq,pins = "io37", "io44";
+					lantiq,pull = <0>;
+					lantiq,open-drain = <0>;
+					lantiq,output = <1>;
+				};
+				pcie-rst {
+					lantiq,pins = "io38";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		eth@E108000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "lantiq,xrx200-net";
+			reg = <	0xE108000 0x3000 /* switch */
+				0xE10B100 0x70 /* mdio */
+				0xE10B1D8 0x30 /* mii */
+				0xE10B308 0x30 /* pmac */
+			>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 72>;
+
+			lan: interface@0 {
+				compatible = "lantiq,xrx200-pdi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				mac-address = [ 00 11 22 33 44 55 ];
+
+				ethernet@0 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <0>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy0>;
+					gpios = <&gpio 37 0>;
+				};
+				ethernet@1 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <1>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy1>;
+					gpios = <&gpio 44 0>;
+				};
+				ethernet@2 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <2>;
+					phy-mode = "gmii";
+					phy-handle = <&phy11>;
+				};
+				ethernet@3 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <4>;
+					phy-mode = "gmii";
+					phy-handle = <&phy13>;
+				};
+			};
+
+			mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "lantiq,xrx200-mdio";
+				phy0: ethernet-phy@0 {
+					reg = <0x0>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>; 
+				};
+				phy1: ethernet-phy@1 {
+					reg = <0x1>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>; 
+				};
+				phy11: ethernet-phy@11 {
+					reg = <0x11>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>; 
+				};
+				phy13: ethernet-phy@13 {
+					reg = <0x13>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>; 
+				};
+			};
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 5 0
+				&gpio 14 0>;
+			lantiq,portmask = <0x3>;
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware = "lantiq/vr9_phy11g_a1x.bin";
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		power {
+			label = "power";
+			gpios = <&gpio 1 0>;
+			linux,code = <0x100>;
+		}; 
+/*		wifi {
+			label = "wifi";
+			gpios = <&gpio 29 0>;
+			linux,code = <0x101>;
+		};*/
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		
+		power {
+			label = "power";
+			gpios = <&gpio 32 1>;
+		};
+		power2 {
+			label = "power2";
+			gpios = <&gpio 33 1>;
+		};
+		info_red {
+			label = "info_red";
+			gpios = <&gpio 34 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 35 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 36 1>;
+		};
+		lan {
+			label = "lan";
+			gpios = <&gpio 38 1>;
+		};
+		info_green {
+			label = "info_green";
+			gpios = <&gpio 47 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/FRITZ7320.dts b/target/linux/lantiq/dts/FRITZ7320.dts
new file mode 100644
index 0000000000..2a7b76693d
--- /dev/null
+++ b/target/linux/lantiq/dts/FRITZ7320.dts
@@ -0,0 +1,138 @@
+/dts-v1/;
+
+/include/ "ar9.dtsi"
+
+/ {
+	model = "FRITZ7320 - 1&1 HomeServer";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "urlader";
+					reg = <0x00000 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0xf60000>;
+				};
+
+				partition@f80000 {
+					label = "tffs (1)";
+					reg = <0xf80000 0x40000>;
+					read-only;
+				};
+
+				partition@fc0000 {
+					label = "tffs (2)";
+					reg = <0xfc0000 0x40000>;
+					read-only;
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pci {
+					lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
+					lantiq,function = "pci";
+				};
+				pci-in {
+					lantiq,groups = "req1", "req2", "req3", "req4";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				pci-out {
+					lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
+					lantiq,output = <1>;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "mii";
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+		};
+
+		pci@E105400 {
+			status = "okay";
+			req-mask = <0xf>;
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+			gpio-reset = <&gpio 21 0>;
+			req-mask = <0xf>; /* GNT1 */
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 1 1>;
+			linux,code = <0xf7>;
+		};
+		dect {
+			label = "dect";
+			gpios = <&gpio 2 1>;
+			linux,code = <0x102>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&gpio 44 1>;
+		};
+		voice {
+			label = "voice";
+			gpios = <&gpio 47 1>;
+		};
+		dect {
+			label = "dect";
+			gpios = <&gpio 38 1>;
+		};
+		wlan {
+			label = "wlan";
+			gpios = <&gpio 37 1>;
+		};
+		online {
+			label = "online";
+			gpios = <&gpio 35 1>;
+		};
+		online2 {
+			label = "online2";
+			gpios = <&gpio 45 1>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/VG3503J.dts b/target/linux/lantiq/dts/VG3503J.dts
new file mode 100644
index 0000000000..0aea8d80c7
--- /dev/null
+++ b/target/linux/lantiq/dts/VG3503J.dts
@@ -0,0 +1,189 @@
+/dts-v1/;
+
+/include/ "vr9.dtsi"
+
+/ {
+	model = "VG3503J - BT OpenReach VDSL Modem";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			ranges = <0 0 0x0 0x3ffffff>;
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x20000>;
+				};
+
+				partition@20000 {
+					label = "kernel";
+					reg = <0x20000 0x180000>;
+				};
+
+				partition@1a0000 {
+					label = "rootfs";
+					reg = <0x1a0000 0x5a0000>;
+				};
+
+				partition@740000 {
+					label = "btagent";
+					reg = <0x740000 0x80000>;
+				};
+
+				partition@7c0000 {
+					label = "pri_bfocus_cfg";
+					reg = <0x7c0000 0x10000>;
+				};
+
+				partition@7d0000 {
+					label = "sec_bfocus_cfg";
+					reg = <0x7d0000 0x10000>;
+				};
+
+				partition@7e0000 {
+					label = "sysconfig";
+					reg = <0x7e0000 0x10000>;
+				};
+
+				partition@7f0000 {
+					label = "misc_cfg";
+					reg = <0x7f0000 0x10000>;
+				};
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				mdio {
+					lantiq,groups = "mdio";
+					lantiq,function = "mdio";
+				};
+			};
+		};
+
+		eth@E108000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "lantiq,xrx200-net";
+			reg = <	0xE108000 0x3000 /* switch */
+				0xE10B100 0x70 /* mdio */
+				0xE10B1D8 0x30 /* mii */
+				0xE10B308 0x30 /* pmac */
+			>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 72>;
+
+			lan: interface@0 {
+				compatible = "lantiq,xrx200-pdi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				mac-address = [ 00 11 22 33 44 55 ];
+
+				ethernet@2 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <2>;
+					phy-mode = "mii";
+					phy-handle = <&phy11>;
+				};
+				ethernet@4 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <4>;
+					phy-mode = "mii";
+					phy-handle = <&phy13>;
+				};
+			};
+
+			mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "lantiq,xrx200-mdio";
+				phy11: ethernet-phy@11 {
+					reg = <0x11>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>;
+				};
+				phy13: ethernet-phy@13 {
+					reg = <0x13>;
+					compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+					lantiq,c45-reg-init = <1 0 0 0>;
+				};
+			};
+		};
+	};
+
+	gphy-xrx200 {
+		compatible = "lantiq,phy-xrx200";
+		firmware = "lantiq/vr9_phy22f_a1x.bin";
+		phys = [ 00 01 ];
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		reset {
+			label = "reset";
+			gpios = <&gpio 6 1>;
+			linux,code = <0x198>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		port2green {
+			label = "bt:green:port2";
+			gpios = <&gpio 2 0>;
+		};
+		lan2 {
+			label = "bt:green:lan2";
+			gpios = <&gpio 5 0>;
+		};
+		port2orange {
+			label = "bt:orange:port2";
+			gpios = <&gpio 7 0>;
+		};
+		power2 {
+			label = "power2";
+			gpios = <&gpio 14 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 19 1>;
+		};
+		power {
+			label = "power";
+			gpios = <&gpio 28 1>;
+		};
+		lan1 {
+			label = "bt:green:lan1";
+			gpios = <&gpio 44 0>;
+		};
+		port1green {
+			label = "bt:green:port1";
+			gpios = <&gpio 45 0>;
+		};
+		port1orange {
+			label = "bt:orange:port1";
+			gpios = <&gpio 47 0>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/WBMR.dts b/target/linux/lantiq/dts/WBMR.dts
new file mode 100644
index 0000000000..bf83e7df0c
--- /dev/null
+++ b/target/linux/lantiq/dts/WBMR.dts
@@ -0,0 +1,167 @@
+/dts-v1/;
+
+/include/ "ar9.dtsi"
+
+/ {
+	model = "WBMR - Buffalo WBMR-HP-G300H";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	fpi@10000000 {
+		localbus@0 {
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x40000>;
+					read-only;
+				};
+
+				partition@40000 {
+					label = "uboot_env";
+					reg = <0x40000 0x20000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x60000 0x1f20000>;
+				};
+
+				partition@0x1fc0000 {
+					label = "board";
+					reg = <0x1fc0000 0x20000>;
+					read-only;
+				};
+
+				partition@0x1fe0000 {
+					label = "calibration";
+					reg = <0x1fe0000 0x20000>;
+					read-only;
+				};
+			};
+
+			mac_addr {
+				compatible = "lantiq,eth-mac";
+				reg = <0 0x1fd0024 0x6>;
+			};
+		};
+
+		gpio: pinmux@E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pci-in {
+					lantiq,groups = "req1";
+					lantiq,output = <0>;
+					lantiq,open-drain = <1>;
+					lantiq,pull = <2>;
+				};
+				pci-out {
+					lantiq,groups = "gnt1";
+					lantiq,output = <1>;
+					lantiq,pull = <0>;
+				};
+				pci_rst {
+					lantiq,pins = "io21";
+					lantiq,pull = <0>;
+					lantiq,output = <1>;
+				};
+			};
+		};
+
+		etop@E180000 {
+			phy-mode = "rgmii";
+		};
+
+		ifxhcd@E101000 {
+			status = "okay";
+			gpios = <&gpio 36 0>;
+		};
+
+		pci@E105400 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		
+		wps {
+			label = "wps";
+			gpios = <&gpio 0 1>;
+			linux,code = <0x211>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 37 1>;
+			linux,code = <0x198>;
+		};
+		eject {
+			label = "eject";
+			gpios = <&gpio 34 1>;
+			linux,code = <0xf7>;
+		};
+		movie {
+			label = "movie";
+			gpios = <&gpio 22 1>;
+			linux,code = <0x109>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "power";
+			gpios = <&gpio 1 1>;
+		};
+		power2 {
+			label = "power2";
+			gpios = <&gpio 5 1>;
+		};
+		security {
+			label = "security";
+			gpios = <&gpio 14 1>;
+		};
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 15 1>;
+		};
+		dsl {
+			label = "dsl";
+			gpios = <&gpio 16 1>;
+		};
+		online {
+			label = "online";
+			gpios = <&gpio 17 1>;
+		};
+		online2 {
+			label = "online2";
+			gpios = <&gpio 18 1>;
+		};
+		movie {
+			label = "movie";
+			gpios = <&gpio 20 1>;
+		};
+		usb {
+			label = "usb";
+			gpios = <&gpio 28 1>;
+			default-state = "on";
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/amazonse.dtsi b/target/linux/lantiq/dts/amazonse.dtsi
new file mode 100644
index 0000000000..13d3e73860
--- /dev/null
+++ b/target/linux/lantiq/dts/amazonse.dtsi
@@ -0,0 +1,148 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,ase";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips4Kc";
+		};
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x28
+				0x80228 0x28
+				0x80250 0x28
+				0x80278 0x28
+				0x802a0 0x28>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+
+	sram@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram", "simple-bus";
+		reg = <0x1F000000 0x800000>;
+		ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <29 30 31>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xway";
+			reg = <0x203000 0x1000>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		spi@E100800 {
+			compatible = "lantiq,spi-xway";
+			reg = <0xE100800 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <24 25 26>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		gptu@E100A00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xE100A00 0x100>;
+			interrupt-parent = <&icu0>;
+                        interrupts = <97 98 99 100 101 102>;
+			status = "disabled";
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-ase";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+		};
+
+		serial@E100C00 {
+			compatible = "lantiq,asc";
+			reg = <0xE100C00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <72 74 75>;
+		};
+
+		mei@E116000 {
+			compatible = "lantiq,mei-xway";
+			interrupt-parent = <&icu0>;
+			interrupts = <63>;
+		};
+
+		ifxhcd@E101000 {
+			compatible = "lantiq,ifxhcd-ase";
+			reg = <0xE101000 0x1000
+				0xE120000 0x3f000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <39>;
+			status = "disabled";
+		};
+
+		dma0: dma@E104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xE104100 0x800>;
+		};
+
+		ebu0: ebu@E105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xE105300 0x100>;
+		};
+
+		ppe@E234000 {
+			compatible = "lantiq,ppe-ase";
+			interrupt-parent = <&icu0>;
+			interrupts = <85>;
+		};
+
+		etop@E180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xE180000 0x40000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <105 109>;
+		};
+	};
+
+	adsl {
+		compatible = "lantiq,adsl-ase";
+	};
+};
diff --git a/target/linux/lantiq/dts/ar9.dtsi b/target/linux/lantiq/dts/ar9.dtsi
new file mode 100644
index 0000000000..ba37f135df
--- /dev/null
+++ b/target/linux/lantiq/dts/ar9.dtsi
@@ -0,0 +1,179 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,ar9";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips34K";
+		};
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x28
+				0x80228 0x28
+				0x80250 0x28
+				0x80278 0x28
+				0x802a0 0x28>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+
+	sram@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram";
+		reg = <0x1F000000 0x800000>;
+		ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <166 135 66 40 41 42>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xway";
+			reg = <0x203000 0x1000>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+		};
+
+		gptu@E100A00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xE100A00 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <126 127 128 129 130 131>;
+		};
+
+		asc0: serial@E100400 {
+			compatible = "lantiq,asc";
+			reg = <0xE100400 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <104 105 106>;
+			status = "disabled";
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xr9";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+		};
+
+		asc1: serial@E100C00 {
+			compatible = "lantiq,asc";
+			reg = <0xE100C00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <112 113 114>;
+		};
+
+		ifxhcd@E101000 {
+			compatible = "lantiq,ifxhcd-arx100";
+			reg = <0xE101000 0x1000
+				0xE120000 0x3f000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <62 91>;
+			status = "disabled";
+		};
+
+		deu@E103100 {
+			compatible = "lantiq,deu-arx100";
+			reg = <0xE103100 0xf00>;
+		};
+
+		dma0: dma@E104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xE104100 0x800>;
+		};
+
+		ebu0: ebu@E105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xE105300 0x100>;
+		};
+
+		mei@E116000 {
+			compatible = "lantiq,mei-xway";
+			interrupt-parent = <&icu0>;
+			interrupts = <63>;
+		};
+
+		etop@E180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xE180000 0x40000
+				0xE108000 0x200>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 72>;
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		ppe@E234000 {
+			compatible = "lantiq,ppe-arx100";
+			interrupt-parent = <&icu0>;
+			interrupts = <96>;
+		};
+
+		pci0: pci@E105400 {
+			status = "disabled";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
+				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>;	/* io space */
+			reg = <0x7000000 0x8000		/* config space */
+				0xE105400 0x400>;	/* pci bridge */
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+			req-mask = <0x1>;
+		};
+	};
+
+	adsl {
+		compatible = "lantiq,adsl-arx100";
+	};
+};
diff --git a/target/linux/lantiq/dts/danube.dtsi b/target/linux/lantiq/dts/danube.dtsi
new file mode 100644
index 0000000000..68bd349e6f
--- /dev/null
+++ b/target/linux/lantiq/dts/danube.dtsi
@@ -0,0 +1,201 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,danube";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24Kc";
+		};
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x28
+				0x80228 0x28
+				0x80250 0x28
+				0x80278 0x28
+				0x802a0 0x28>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+
+	sram@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram", "simple-bus";
+		reg = <0x1F000000 0x800000>;
+		ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <166 135 66>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vmmc@107000 {
+			status = "disabled";
+			compatible = "lantiq,vmmc";
+			reg = <0x103000 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <150 151 152 153 154 155>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xway";
+			reg = <0x203000 0x1000>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+		};
+
+		gptu@E100A00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xE100A00 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <126 127 128 129 130 131>;
+		};
+
+		gpios: stp@E100BB0 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-stp-xway";
+			gpio-controller;
+			reg = <0xE100BB0 0x40>;
+			lantiq,shadow = <0xfff>;
+			lantiq,groups = <0x3>;
+			status = "disabled";
+		};
+
+		asc0: serial@E100400 {
+			compatible = "lantiq,asc";
+			reg = <0xE100400 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <104 105 106>;
+			status = "disabled";
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xway";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+		};
+
+		asc1: serial@E100C00 {
+			compatible = "lantiq,asc";
+			reg = <0xE100C00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <112 113 114>;
+		};
+
+		ifxhcd@E101000 {
+			compatible = "lantiq,ifxhcd-danube";
+			reg = <0xE101000 0x1000
+				0xE120000 0x3f000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <62>;
+			status = "disabled";
+		};
+
+		deu@E103100 {
+			compatible = "lantiq,deu-danube";
+			reg = <0xE103100 0xf00>;
+		};
+
+		dma0: dma@E104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xE104100 0x800>;
+		};
+
+		ebu0: ebu@E105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xE105300 0x100>;
+		};
+
+		mei@E116000 {
+			compatible = "lantiq,mei-xway";
+			interrupt-parent = <&icu0>;
+			interrupts = <63>;
+		};
+
+		etop@E180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xE180000 0x40000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 78>;
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		ppe@E234000 {
+			compatible = "lantiq,ppe-danube";
+			interrupt-parent = <&icu0>;
+			interrupts = <96>;
+		};
+
+		pci0: pci@E105400 {
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
+				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>;	/* io space */
+			reg = <0x7000000 0x8000		/* config space */
+				0xE105400 0x400>;	/* pci bridge */
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+			req-mask = <0x1>;
+		};
+	};
+
+	adsl {
+		compatible = "lantiq,adsl-danube";
+	};
+};
diff --git a/target/linux/lantiq/dts/falcon.dtsi b/target/linux/lantiq/dts/falcon.dtsi
new file mode 100644
index 0000000000..ec1b450bad
--- /dev/null
+++ b/target/linux/lantiq/dts/falcon.dtsi
@@ -0,0 +1,201 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,falcon";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips34kc";
+		};
+	};
+
+	localbus@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,localbus", "simple-bus";
+		reg = <0x10000000 0xC000000>;
+		ranges = <0x0 0x10000000 0xC000000>;
+	};
+	
+	ebu@18000000 {
+		compatible = "lantiq,ebu-falcon";
+		reg = <0x18000000 0x100>;
+	};
+	
+	sbs2@1D000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sysb2", "simple-bus";
+		reg = <0x1D000000 0x1000000>;
+		ranges = <0x0 0x1D000000 0x1000000>;
+
+		sysgpe@700000 {
+			compatible = "lantiq,sysgpe-falcon";
+			reg = <0x700000 0x100>;
+		};
+	
+		gpio0: gpio@810000 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-falcon";
+			gpio-controller;
+			interrupt-parent = <&icu0>;
+			interrupts = <44>;
+			reg = <0x810000 0x80>;
+			lantiq,bank = <0>;
+		};
+	
+		gpio2: gpio@810100 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-falcon";
+			gpio-controller;
+			interrupt-parent = <&icu0>;
+			interrupts = <46>;
+			reg = <0x810100 0x80>;
+			lantiq,bank = <2>;
+		};
+	
+		syseth@B00000 {
+			compatible = "lantiq,syseth-falcon";
+			reg = <0xB00000 0x100>;
+		};
+	
+		pad@B01000 {
+			compatible = "lantiq,pad-falcon";
+			reg = <0xB01000 0x100>;
+			lantiq,bank = <0>;
+		};
+	
+		pad@B02000 {
+			compatible = "lantiq,pad-falcon";
+			reg = <0xB02000 0x100>;
+			lantiq,bank = <2>;
+		};
+	};
+
+	fpi@1E000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		reg = <0x1E000000 0x1000000>;
+		ranges = <0x0 0x1E000000 0x1000000>;
+
+		serial@100B00 {
+			status = "disabled";
+			compatible = "lantiq,asc";
+			reg = <0x100B00 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <104 105 106>;
+			line = <1>;
+		};
+
+		serial@100C00 {
+			compatible = "lantiq,asc";
+			reg = <0x100C00 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <104 105 106>;
+			line = <0>;
+		};
+
+		i2c@200000 {
+			compatible = "lantiq,lantiq-i2c";
+			reg = <0x200000 0x10000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <18 19 20 21>;
+			gpios = <&gpio1 7 0 &gpio1 8 0>;
+		};
+
+		gpio1: gpio@800100 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-falcon";
+			gpio-controller;
+			interrupt-parent = <&icu0>;
+			interrupts = <45>;
+			reg = <0x800100 0x100>;
+			lantiq,bank = <1>;
+		};
+
+		gpio3: gpio@800200 {
+			status = "disabled";
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-falcon";
+			gpio-controller;
+			interrupt-parent = <&icu0>;
+			interrupts = <47>;
+			reg = <0x800200 0x100>;
+			lantiq,bank = <3>;
+		};
+
+		gpio4: gpio@800300 {
+			status = "disabled";
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-falcon";
+			gpio-controller;
+			interrupt-parent = <&icu0>;
+			interrupts = <48>;
+			reg = <0x800300 0x100>;
+			lantiq,bank = <4>;
+		};
+
+		pad@800400 {
+			compatible = "lantiq,pad-falcon";
+			reg = <0x800400 0x100>;
+			lantiq,bank = <1>;
+		};
+
+		pad@800500 {
+			status = "disabled";
+			compatible = "lantiq,pad-falcon";
+			reg = <0x800500 0x100>;
+			bank = <3>;
+		};
+
+		pad4@800600 {
+			status = "disabled";
+			compatible = "lantiq,pad-falcon";
+			reg = <0x800600 0x100>;
+			bank = <4>;
+		};
+
+		status@802000 {
+			compatible = "lantiq,status-falcon";
+			reg = <0x802000 0x80>;
+		};
+
+		sys1@F00000 {
+			compatible = "lantiq,sys1-falcon";
+			reg = <0xF00000 0x100>;
+		};
+	};
+
+	sbs0@1F000000 {
+
+	};
+
+	sbs1@1F700000 {
+
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,falcon";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x28
+				0x80228 0x28
+				0x80250 0x28
+				0x80278 0x28
+				0x802a0 0x28>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi
new file mode 100644
index 0000000000..c7a28d77aa
--- /dev/null
+++ b/target/linux/lantiq/dts/vr9.dtsi
@@ -0,0 +1,180 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,vr9";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips34Kc";
+		};
+	};
+
+	biu@1F800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1F800000 0x800000>;
+		ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x28
+				0x80228 0x28
+				0x80250 0x28
+				0x80278 0x28
+				0x802a0 0x28>;
+		};
+
+		watchdog@803F0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803F0 0x10>;
+		};
+	};
+
+	sram@1F000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram", "simple-bus";
+		reg = <0x1F000000 0x800000>;
+		ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <166 135 66 40 41 42>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+		};
+
+		dcdc@106a00 {
+			compatible = "lantiq,dcdc-xrx200";
+			reg = <0x106a00 0x200>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xrx200";
+			reg = <0x203000 0x1000>;
+			/* irq for thermal sensor */
+			interrupt-parent = <&icu0>;
+			interrupts = <115>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xEEFFFFF>;
+		reg = <0x10000000 0xEF00000>;
+
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+		};
+
+		gptu@E100A00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xE100A00 0x100>;
+			interrupt-parent = <&icu0>;
+                        interrupts = <126 127 128 129 130 131>;
+		};
+
+		asc0: serial@E100400 {
+			compatible = "lantiq,asc";
+			reg = <0xE100400 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <104 105 106>;
+			status = "disabled";
+		};
+
+		gpio: pinmux@E100B10 {
+			compatible = "lantiq,pinctrl-xr9";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xE100B10 0xA0>;
+		};
+
+		asc1: serial@E100C00 {
+			compatible = "lantiq,asc";
+			reg = <0xE100C00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <112 113 114>;
+		};
+
+		deu@E103100 {
+			compatible = "lantiq,deu-xrx200";
+			reg = <0xE103100 0xf00>;
+		};
+
+		dma0: dma@E104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xE104100 0x800>;
+		};
+		
+		ebu0: ebu@E105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xE105300 0x100>;
+		};
+
+		ifxhcd@E101000 {
+			status = "disabled";
+			compatible = "lantiq,ifxhcd-xrx200";
+			reg = <0xE101000 0x1000
+				0xE120000 0x3f000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <62 91>;
+		};
+
+		mei@E116000 {
+			compatible = "lantiq,mei-xrx200";
+			interrupt-parent = <&icu0>;
+			interrupts = <63>;
+		};
+
+		ppe@E234000 {
+			compatible = "lantiq,ppe-xrx200";
+			interrupt-parent = <&icu0>;
+			interrupts = <96>;
+		};
+
+		pcie@d900000 {
+			interrupt-parent = <&icu0>;
+			interrupts = <161 144>;
+			compatible = "lantiq,pcie-xrx200";
+		};
+
+		pci0: pci@E105400 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
+				0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+			reg = <0x7000000 0x8000         /* config space */
+				0xE105400 0x400>;       /* pci bridge */
+			status = "disabled";
+		};
+
+	};
+
+	vdsl {
+		compatible = "lantiq,vdsl-vrx200";
+	};
+};