lantiq: make dts files and kernel config kernel version specific

Move the devicetree source files to a kernel specific directory in
preparation of adding kernel 4.14 support.

Rename the subtarget kernel config files to match a specific kernel
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 260 deletions

diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi
deleted file mode 100644
index 13bb002c52..0000000000
--- a/target/linux/lantiq/dts/vr9.dtsi
+++ /dev/null
@@ -1,260 +0,0 @@
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "lantiq,xway", "lantiq,vr9";
-
-	aliases {
-		serial0 = &asc1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips34Kc";
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-	};
-
-	cputemp@0 {
-		compatible = "lantiq,cputemp";
-	};
-
-	biu@1F800000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,biu", "simple-bus";
-		reg = <0x1F800000 0x800000>;
-		ranges = <0x0 0x1F800000 0x7FFFFF>;
-
-		icu0: icu@80200 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,icu";
-			reg = <0x80200 0x28
-				0x80228 0x28
-				0x80250 0x28
-				0x80278 0x28
-				0x802a0 0x28>;
-		};
-
-		watchdog@803F0 {
-			compatible = "lantiq,wdt";
-			reg = <0x803F0 0x10>;
-		};
-	};
-
-	sram@1F000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,sram", "simple-bus";
-		reg = <0x1F000000 0x800000>;
-		ranges = <0x0 0x1F000000 0x7FFFFF>;
-
-		eiu0: eiu@101000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,eiu-xway";
-			reg = <0x101000 0x1000>;
-			interrupt-parent = <&icu0>;
-			lantiq,eiu-irqs = <166 135 66 40 41 42>;
-		};
-
-		pmu0: pmu@102000 {
-			compatible = "lantiq,pmu-xway";
-			reg = <0x102000 0x1000>;
-		};
-
-		cgu0: cgu@103000 {
-			compatible = "lantiq,cgu-xway";
-			reg = <0x103000 0x1000>;
-		};
-
-		dcdc@106a00 {
-			compatible = "lantiq,dcdc-xrx200";
-			reg = <0x106a00 0x200>;
-		};
-
-		vmmc@107000 {
-			status = "disabled";
-			compatible = "lantiq,vmmc-xway";
-			reg = <0x103000 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <150 151 152 153 154 155>;
-		};
-
-		rcu0: rcu@203000 {
-			compatible = "lantiq,rcu-xrx200";
-			reg = <0x203000 0x1000>;
-			/* irq for thermal sensor */
-			interrupt-parent = <&icu0>;
-			interrupts = <115>;
-		};
-
-		xbar0: xbar@400000 {
-			compatible = "lantiq,xbar-xway";
-			reg = <0x400000 0x1000>;
-		};
-	};
-
-	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,fpi", "simple-bus";
-		ranges = <0x0 0x10000000 0xEEFFFFF>;
-		reg = <0x10000000 0xEF00000>;
-
-		localbus@0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-				1 0 0x4000000 0x4000010>; /* addsel1 */
-			compatible = "lantiq,localbus", "simple-bus";
-		};
-
-		gptu@E100A00 {
-			compatible = "lantiq,gptu-xway";
-			reg = <0xE100A00 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <126 127 128 129 130 131>;
-		};
-
-		asc0: serial@E100400 {
-			compatible = "lantiq,asc";
-			reg = <0xE100400 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <104 105 106>;
-			status = "disabled";
-		};
-
-		spi: spi@E100800 {
-			compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
-			reg = <0xE100800 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <22 23 24>;
-			interrupt-names = "spi_rx", "spi_tx", "spi_err",
-					"spi_frm";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		gpio: pinmux@E100B10 {
-			compatible = "lantiq,xrx200-pinctrl";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-		};
-
-		asc1: serial@E100C00 {
-			compatible = "lantiq,asc";
-			reg = <0xE100C00 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <112 113 114>;
-		};
-
-		deu@E103100 {
-			compatible = "lantiq,deu-xrx200";
-			reg = <0xE103100 0xf00>;
-		};
-
-		dma0: dma@E104100 {
-			compatible = "lantiq,dma-xway";
-			reg = <0xE104100 0x800>;
-		};
-
-		ebu0: ebu@E105300 {
-			compatible = "lantiq,ebu-xway";
-			reg = <0xE105300 0x100>;
-		};
-
-		ifxhcd@E101000 {
-			status = "disabled";
-			compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200";
-			reg = <0xE101000 0x1000
-				0xE120000 0x3f000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <62 91>;
-			dr_mode = "host";
-		};
-
-		ifxhcd@E106000 {
-			status = "disabled";
-			compatible = "lantiq,xrx200-usb";
-			reg = <0xE106000 0x1000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <91>;
-			dr_mode = "host";
-		};
-
-		eth0: eth@E108000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "lantiq,xrx200-net";
-			reg = <	0xE108000 0x3000 /* switch */
-				0xE10B100 0x70 /* mdio */
-				0xE10B1D8 0x30 /* mii */
-				0xE10B308 0x30 /* pmac */
-			>;
-			interrupt-parent = <&icu0>;
-			interrupts = <75 73 72>;
-		};
-
-		mei@E116000 {
-			compatible = "lantiq,mei-xrx200";
-			reg = <0xE116000 0x9c>;
-			interrupt-parent = <&icu0>;
-			interrupts = <63>;
-		};
-
-		ppe@E234000 {
-			compatible = "lantiq,ppe-xrx200";
-			interrupt-parent = <&icu0>;
-			interrupts = <96>;
-		};
-
-		pcie0: pcie@d900000 {
-			compatible = "lantiq,pcie-xrx200";
-
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-
-			interrupt-parent = <&icu0>;
-			interrupts = <161 144>;
-
-			device_type = "pci";
-
-			gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
-		};
-
-		pci0: pci@E105400 {
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			compatible = "lantiq,pci-xway";
-			bus-range = <0x0 0x0>;
-			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
-				0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
-			reg = <0x7000000 0x8000         /* config space */
-				0xE105400 0x400>;       /* pci bridge */
-			lantiq,bus-clock = <33333333>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
-			req-mask = <0x1>; /* GNT1 */
-		};
-	};
-
-	vdsl {
-		compatible = "lantiq,vdsl-vrx200";
-	};
-};