lantiq: make dts files and kernel config kernel version specific

Move the devicetree source files to a kernel specific directory in
preparation of adding kernel 4.14 support.

Rename the subtarget kernel config files to match a specific kernel
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 298 deletions

diff --git a/target/linux/lantiq/dts/EASY80920.dtsi b/target/linux/lantiq/dts/EASY80920.dtsi
deleted file mode 100644
index b19b9713f6..0000000000
--- a/target/linux/lantiq/dts/EASY80920.dtsi
+++ /dev/null
@@ -1,298 +0,0 @@
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-
-		led-usb = &usb1;
-		led-usb2 = &usb2;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	fpi@10000000 {
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				exin3 {
-					lantiq,groups = "exin3";
-					lantiq,function = "exin";
-				};
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-				};
-				nand {
-					lantiq,groups = "nand cle", "nand ale",
-							"nand rd", "nand rdy";
-					lantiq,function = "ebu";
-				};
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				pci {
-					lantiq,groups = "gnt1", "req1";
-					lantiq,function = "pci";
-				};
-				conf_out {
-					lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
-							"io4", "io5", "io6", /* stp */
-							"io21",
-							"io33";
-					lantiq,open-drain;
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-				pcie-rst {
-					lantiq,pins = "io38";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-				conf_in {
-					lantiq,pins = "io39", /* exin3 */
-							"io48"; /* nand rdy */
-					lantiq,pull = <2>;
-				};
-			};
-			pins_spi_default: pins_spi_default {
-				spi_in {
-					lantiq,groups = "spi_di";
-					lantiq,function = "spi";
-				};
-				spi_out {
-					lantiq,groups = "spi_do", "spi_clk",
-						"spi_cs4";
-					lantiq,function = "spi";
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		stp: stp@E100BB0 {
-			compatible = "lantiq,gpio-stp-xway";
-			reg = <0xE100BB0 0x40>;
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			lantiq,shadow = <0xffff>;
-			lantiq,groups = <0x7>;
-			lantiq,dsl = <0x3>;
-			lantiq,phy1 = <0x7>;
-			lantiq,phy2 = <0x7>;
-			/* lantiq,rising; */
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-			lantiq,portmask = <0x3>;
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy11g_a14.bin";
-		firmware2 = "lantiq/xrx200_phy11g_a22.bin";
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-/*		reset {
-			label = "reset";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};*/
-		paging {
-			label = "paging";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PHONE>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power: power {
-			label = "easy80920:green:power";
-			gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		warning {
-			label = "easy80920:green:warning";
-			gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
-		};
-		fxs1 {
-			label = "easy80920:green:fxs1";
-			gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
-		};
-		fxs2 {
-			label = "easy80920:green:fxs2";
-			gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
-		};
-		fxo {
-			label = "easy80920:green:fxo";
-			gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
-		};
-		usb1: usb1 {
-			label = "easy80920:green:usb1";
-			gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
-		};
-		usb2: usb2 {
-			label = "easy80920:green:usb2";
-			gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
-		};
-		sd {
-			label = "easy80920:green:sd";
-			gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
-		};
-		wps {
-			label = "easy80920:green:wps";
-			gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&spi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pins_spi_default>;
-
-	status = "ok";
-
-	m25p80@4 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <4 0>;
-		spi-max-frequency = <1000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x20000>;
-				label = "SPI (RO) U-Boot Image";
-				read-only;
-			};
-
-			partition@20000 {
-				reg = <0x20000 0x10000>;
-				label = "ENV_MAC";
-				read-only;
-			};
-
-			partition@30000 {
-				reg = <0x30000 0x10000>;
-				label = "DPF";
-				read-only;
-			};
-
-			partition@40000 {
-				reg = <0x40000 0x10000>;
-				label = "NVRAM";
-				read-only;
-			};
-
-			partition@500000 {
-				reg = <0x50000 0x003a0000>;
-				label = "kernel";
-			};
-		};
-	};
-};
-
-&eth0 {
-	lan: interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		lantiq,switch;
-
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "gmii";
-			phy-handle = <&phy13>;
-		};
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "gmii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@1 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <1>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy1>;
-		};
-		ethernet@0 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <0>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy0>;
-		};
-	};
-
-	wan: interface@1 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-		lantiq,wan;
-
-		ethernet@5 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <5>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy5: ethernet-phy@5 {
-			reg = <0x5>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};