lantiq: make dts files and kernel config kernel version specific

Move the devicetree source files to a kernel specific directory in
preparation of adding kernel 4.14 support.

Rename the subtarget kernel config files to match a specific kernel
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 208 deletions

diff --git a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts
deleted file mode 100644
index d37b9728d2..0000000000
--- a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts
+++ /dev/null
@@ -1,208 +0,0 @@
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9";
-	model = "BT Home Hub 3A";  /* SoC: Lantiq ar9 @ 333MHz */
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_orange;
-		led-failsafe = &power_red;
-		led-running = &power_blue;
-
-		led-dsl = &broadband_blue;
-		led-wifi = &wireless_blue;
-	};
-
-	memory@0 {				  /* RAM: Samsung K4H511638F-LC 64MB */
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nand-parts@0 {		  /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
-				compatible = "lantiq,nand-xway";
-				lantiq,cs = <1>;
-				bank-width = <2>;
-				reg = <1 0x0 0x2000000 >;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "preboot";
-						reg = <0x00000 0x8000>;
-						read-only;
-					};
-					partition@8000 {
-						label = "u-boot";
-						reg = <0x8000 0x05c000>;
-						read-only;
-					};
-					partition@64000 {
-						label = "uboot_env";
-						reg = <0x64000 0x004000>;
-					};
-					ath9k_cal: partition@68000 {
-						label = "art-copy";
-						reg = <0x68000 0x004000>;
-					};
-					partition@6c000 {
-						label = "kernel";
-						reg = <0x6c000 0x200000>;
-					};
-					partition@26c000 {
-						label = "ubi";
-						reg = <0x26c000 0x1d94000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				nand_out {
-					lantiq,groups = "nand cle", "nand ale";
-					lantiq,function = "ebu";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-				nand_cs1 {
-					lantiq,groups = "nand cs1";
-					lantiq,function = "ebu";
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-
-				pci_in {
-					lantiq,groups = "req1";
-					lantiq,function = "pci";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
-
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "rgmii";
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		reset {
-			label = "reset";
-			gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-		restart {
-			label = "restart";
-			gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		wireless-red {
-			label = "bthomehubv3a:red:wireless";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-		};
-		wireless-orange {
-			label = "bthomehubv3a:orange:wireless";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		wireless_blue: wireless-blue {
-			label = "bthomehubv3a:blue:wireless";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
-
-		broadband-red {
-			label = "bthomehubv3a:red:broadband";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-		};
-		broadband-orange {
-			label = "bthomehubv3a:orange:broadband";
-			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-		};
-		broadband_blue: broadband-blue {
-			label = "bthomehubv3a:blue:broadband";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-		};
-
-		power_red: power-red {
-			label = "bthomehubv3a:red:power";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-		power_orange: power-orange {
-			label = "bthomehubv3a:orange:power";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_blue: power-blue {
-			label = "bthomehubv3a:blue:power";
-			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
-	ath9k@7000 {
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-	};
-};