lantiq: move partitions into partion table node

Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280

1 files changed, 49 insertions, 38 deletions

diff --git a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
index 69b977af29..0165156faa 100644
--- a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
+++ b/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
@@ -47,29 +47,35 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				partition@0 {
-					label = "uboot";
-					reg = <0x00000 0x40000>; /* 256KB */
-				};
-
-				partition@40000 {
-					label = "uboot_env";
-					reg = <0x40000 0x10000>; /* 64KB */
-				};
-
-				partition@50000 {
-					label = "rg_conf_1";
-					reg = <0x50000 0x10000>;
-				};
-
-				partition@60000 {
-					label = "rg_conf_2";
-					reg = <0x60000 0x10000>;
-				};
-
-				partition@70000 {
-					label = "rg_conf_factory";
-					reg = <0x70000 0x10000>;
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "uboot";
+						reg = <0x00000 0x40000>; /* 256KB */
+					};
+
+					partition@40000 {
+						label = "uboot_env";
+						reg = <0x40000 0x10000>; /* 64KB */
+					};
+
+					partition@50000 {
+						label = "rg_conf_1";
+						reg = <0x50000 0x10000>;
+					};
+
+					partition@60000 {
+						label = "rg_conf_2";
+						reg = <0x60000 0x10000>;
+					};
+
+					partition@70000 {
+						label = "rg_conf_factory";
+						reg = <0x70000 0x10000>;
+					};
 				};
 			};
 
@@ -82,22 +88,27 @@
 				#size-cells = <1>;
 				req-mask = <0x1>;  /* PCI request lines to mask during NAND access */
 
-				ath9k_cal: partition@0 {
-					label = "art";	   /* Atheros 9160 wifi b/g/n radio EEPROM */
-					reg = <0x00000 0x4000>;
-					read-only;
-				};
-
-				partition@4000 {
-					label = "kernel";
-					reg = <0x4000 0x200000>;
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					ath9k_cal: partition@0 {
+						label = "art";	   /* Atheros 9160 wifi b/g/n radio EEPROM */
+						reg = <0x00000 0x4000>;
+						read-only;
+					};
+
+					partition@4000 {
+						label = "kernel";
+						reg = <0x4000 0x200000>;
+					};
+
+					partition@164000 {
+						label = "ubi";
+						reg = <0x204000 0x1DFC000>;
+					};
 				};
-
-				partition@164000 {
-					label = "ubi";
-					reg = <0x204000 0x1DFC000>;
-				};
-
 			};