lantiq: cleanup dts files

- remove not existing properties
- remove properties having the same values as the included dtsi
- remove nodes which are disabled in the included dtsi and not enabled
  in dts
- replace the deprecated pinctrl-* compatible strings
- use the same labels for nodes as the included dtsi
- move common used vr9 pci properties to vr9.dtsi
- remove the unused stp node from HomeHub 2B devcie tree source file
- fix spaces vs. tabs and remove superfluous linebreaks

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 12 insertions, 50 deletions

diff --git a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
index 7a0edaeecf..502132e4e9 100644
--- a/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
+++ b/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
@@ -30,15 +30,7 @@
 	};
 
 	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		localbus@0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-				1 0 0x4000000 0x4000010>; /* addsel1 */
-			compatible = "lantiq,localbus", "simple-bus";
-
 			nor-boot@0 {				/* NOR Flash: Spansion S29AL004D 512KB */
 				compatible = "lantiq,nor";	/* "AMD AM29LV400BB" compatible on 3.3.8 */
 				lantiq,cs = <0>;
@@ -111,7 +103,6 @@
 				};
 			};
 
-
 			ath9k_eep {
 				compatible = "ath9k,eeprom";
 				ath,eep-flash = <&ath9k_cal 0x0000>;
@@ -122,22 +113,10 @@
 		};
 
 		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-xway";
 			pinctrl-names = "default";
 			pinctrl-0 = <&state_default>;
 
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-
 			state_default: pinmux {
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-					lantiq,output = <1>;
-					lantiq,open-drain = <0>;
-					lantiq,pull = <0>;
-				};
 				nand_out {
 					lantiq,groups = "nand cle", "nand ale";
 					lantiq,function = "ebu";
@@ -186,38 +165,21 @@
 		};
 
 		etop@E180000 {
-			compatible = "lantiq,etop-xway";
-			reg = <0xE180000 0x40000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <73 78>;
 			phy-mode = "rmii";
-			mac-address = [ 00 11 22 33 44 55 ];
 		};
 
 		ifxhcd@E101000 {
 			status = "okay";
 		};
 
-		stp0: stp@E100BB0 {
+		gpios: stp@E100BB0 {
 			status = "okay";
-			#gpio-cells = <2>;
-			compatible = "lantiq,gpio-stp-xway";
-			gpio-controller;
-			reg = <0xE100BB0 0x40>;
-
-			lantiq,shadow = <0xfff>;
-			lantiq,groups = <0x3>;
 		};
 
 		pci@E105400 {
 			status = "okay";
-			lantiq,bus-clock = <33333333>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0x1>;		 /* GNT1 */
 		};
-
 	};
 
 	gpio-keys-polled {
@@ -248,52 +210,52 @@
 
 		upgrading-orange {
 			label = "bthomehubv2b:orange:upgrading";
-			gpios = <&stp0 5 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
 		};
 
 		phone-orange {
 			label = "bthomehubv2b:orange:phone";
-			gpios = <&stp0 6 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
 		};
 		phone-blue {
 			label = "bthomehubv2b:blue:phone";
-			gpios = <&stp0 7 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
 		};
 
 		wireless-orange {
 			label = "bthomehubv2b:orange:wireless";
-			gpios = <&stp0 8 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
 		};
 		wireless_blue: wireless-blue {
 			label = "bthomehubv2b:blue:wireless";
-			gpios = <&stp0 9 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
 		};
 
 		broadband-red {
 			label = "bthomehubv2b:red:broadband";
-			gpios = <&stp0 10 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
 		};
 		broadband-orange {
 			label = "bthomehubv2b:orange:broadband";
-			gpios = <&stp0 11 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
 		};
 		broadband_blue: broadband-blue {
 			label = "bthomehubv2b:blue:broadband";
-			gpios = <&stp0 12 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
 		};
 
 		power_red: power-red {
 			label = "bthomehubv2b:red:power";
-			gpios = <&stp0 13 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
 		};
 		power_orange: power-orange {
 			label = "bthomehubv2b:orange:power";
-			gpios = <&stp0 14 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 		power_blue: power-blue {
 			label = "bthomehubv2b:blue:power";
-			gpios = <&stp0 15 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };