lantiq: make dts files and kernel config kernel version specific

Move the devicetree source files to a kernel specific directory in
preparation of adding kernel 4.14 support.

Rename the subtarget kernel config files to match a specific kernel
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 0 insertions, 155 deletions

diff --git a/target/linux/lantiq/dts/ARV7525PW.dts b/target/linux/lantiq/dts/ARV7525PW.dts
deleted file mode 100644
index 0007535895..0000000000
--- a/target/linux/lantiq/dts/ARV7525PW.dts
+++ /dev/null
@@ -1,155 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
-	model = "Speedport W303V Typ A";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &power_green;
-		led-internet = &online;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x10000>;
-						read-only;
-					};
-
-					partition@10000 {
-						label = "uboot_env";
-						reg = <0x10000 0x10000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x3d0000>;
-					};
-
-					boardconfig: partition@400000 {
-						label = "board_config";
-						reg = <0x3f0000 0x10000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-				};
-				pci {
-					lantiq,groups = "gnt1", "req1";
-					lantiq,function = "pci";
-				};
-			};
-		};
-
-		etop@E180000 {
-			phy-mode = "mii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power_green: power {
-			label = "arv7525pw:green:power";
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		power_red: power1 {
-			label = "arv7525pw:red:power";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		online: online {
-			label = "arv7525pw:green:online";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		voice {
-			label = "arv7525pw:green:telefonie";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		voice2 {
-			label = "arv7525pw:red:telefonie";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "arv7525pw:green:wlan";
-			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
-
-	wifi@0,0 {
-		compatible = "pci0,0";
-		reg = <0x7000 0 0 0 0>;
-		ralink,mtd-eeprom = <&boardconfig 0x410>;
-	};
-};