lantiq: board.d: cleanup default switch config

Add or fix the physical port number of switch ports to allow LuCI to
display the ports in physical order.

Remove the physical port number in case bridge port and physical port
order are the same.

Reorder the ucidef_add_switch parameter to be aligned with the switch
port number.

Remove board settings which are covered by the default case and remove
comments.

Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 19 insertions, 32 deletions

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 1bdd57a8a1..3f61326259 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -21,101 +21,88 @@ interface_wan=""
 board=$(lantiq_board_name)
 
 case "$board" in
-# adm6996
 ARV4510PW)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
+		"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
 	;;
 
 ARV4520PW)
 	ucidef_add_switch "switch0" \
-		"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
 	;;
 
 ACMP252|GIGASX76X)
 	ucidef_add_switch "switch0" \
-		"4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
 	;;
 
-# ar8316
 ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
 	ucidef_add_switch "switch0" \
-		"0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
+		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 	;;
 
-# rtl8306g
 ARV7506PW11)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 	ucidef_add_switch "switch0" \
-		"4:lan:1" "3:lan:2" "2:lan:3" "1:lan:4" "5t@eth0"
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
 	;;
 
-# rtl8306g
 ARV7519PW)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
+		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
 	;;
 
 WBMR)
 	ucidef_add_switch "switch0" \
-		"0t@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
+		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 	;;
 
-VG3503J)
-	ucidef_set_interface_lan 'eth0'
-	;;
-
-ARV4518PWR01*)
-        ucidef_set_interface_lan 'eth0'
-        ;;
-
 DGN3500*)
 	ucidef_add_switch "switch0" \
-		"3:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "5t@eth0"
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
 	;;
 
 FRITZ7360SL)
 	ucidef_add_switch "switch0" \
-		"4:lan:1" "2:lan:2" "0:lan:3" "1:lan:4" "6t@eth0"
+		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
 
 H201L)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"
+		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
 	;;
 
-#rtl8306g
 P2601HNFX)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "5t@eth0"
+		"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
 	;;
 
 P2812HNUF*)
 	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
+		"0:lan" "1:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 	;;
 
 TDW8970|TDW8980)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
+		"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
 	;;
 
 VR200v)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "2:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
+		"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 	;;
 
 ARV7519RW22)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:lan:5" "6t@eth0"
+		"0:lan" "2:lan" "3:lan" "4:lan" "5:lan" "6t@eth0"
 	;;
 
 BTHOMEHUBV2B)
@@ -134,19 +121,19 @@ BTHOMEHUBV3A)
 BTHOMEHUBV5A)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary caldata 4364)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:1" "1:lan:2" "2:lan:3" "4:lan:4" "6t@eth0"
+		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
 
 VGV7519)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 	ucidef_add_switch "switch0" \
-		"4:lan:1" "2:lan:2" "1:lan:3" "0:lan:4" "6t@eth0"
+		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
 
 VGV7510KW22)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
 	ucidef_add_switch "switch0" \
-		"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
+		"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "6t@eth0"
 	;;
 
 WBMR300)
@@ -160,7 +147,7 @@ EASY80920NAND|EASY80920NOR)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"4:lan:1" "2:lan:2" "1:lan:3" "0:lan:3" "5:wan:1" "6t@eth0"
+		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
 
 *)