aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/base-files
diff options
context:
space:
mode:
authorJohann Neuhauser <johann@it-neuhauser.de>2018-05-17 19:12:35 +0200
committerMathias Kresin <dev@kresin.me>2018-07-18 19:17:46 +0200
commit02d53e6a2113f80ae429664e7990d167fbf44604 (patch)
tree839b9680b321fa840fa3bdfaaaeedaf10e4335bf /target/linux/lantiq/base-files
parentf2f7802148f3d070b27f65b169efebfc6bf8286d (diff)
downloadupstream-02d53e6a2113f80ae429664e7990d167fbf44604.tar.gz
upstream-02d53e6a2113f80ae429664e7990d167fbf44604.tar.bz2
upstream-02d53e6a2113f80ae429664e7990d167fbf44604.zip
lantiq: add support for FritzBox 7312
The FritzBox 7312 is also known as 1&1 WLAN-MODEM. The device is almost the same as FB7330, but only one ETH-Port and no USB. Hardware SoC: Lantiq Xway ARX188 PSB 50812 EL RAM: 64MB DDR1 (Zentel A4S12D40FTP-G5) Ethernet: Atheros 8030 Wireless: Atheros AR9227 b/g/n 2x2 DSL: Lantiq ADSL2+ DECT: Dialog SC14441 Buttons: WiFi, DECT LEDs: Power/DSL, Fon, DECT, WLAN, Info LEDs Power: GPIO#44 (active low) Internet: GPIO#47 (active low) DECT: GPIO#38 (active low) WLAN: GPIO#37 (active low) Info: GPIO#35 (active low) The Fon LED is labeled as internet in avm gpl sources. Buttons WLAN: GPIO#1 (active low) DECT: GPIO#2 (active low) Phy GPIO#03: 25 MHz GPIO#34: Reset (active low) GPIO#39: Int GPIO#42: MII MDIO GPIO#43: MII MDC PCIe GPIO#21: reset (active low) Installation: To install OpenWrt via Eva bootloader, within the first seconds after power on a ftp connection need to be established to the FRITZ!Box at 192.168.178.1 and the the following ftp commands need to be run: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put /path/to/openwrt-lantiq-xway-avm_fritz7312-squashfs-sysupgrade.bin mtd1 ftp> quote REBOOT Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
Diffstat (limited to 'target/linux/lantiq/base-files')
-rwxr-xr-xtarget/linux/lantiq/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom2
2 files changed, 2 insertions, 1 deletions
diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 6e2e1934ae..7817bdd00e 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -144,6 +144,7 @@ avm,fritz3370-rev2-micron)
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
;;
+avm,fritz7312|\
avm,fritz7320)
annex="b"
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index 75b763076e..40642e580f 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -160,7 +160,7 @@ case "$FIRMWARE" in
avm,fritz3370-rev2-micron)
ath9k_eeprom_extract_reverse "urlader" 5441 1088
;;
- avm,fritz7320|avm,fritz7360sl)
+ avm,fritz7312|avm,fritz7320|avm,fritz7360sl)
ath9k_eeprom_extract "urlader" 2437 0
;;
tplink,tdw8970|tplink,tdw8980)