diff options
author | Kyson Lok <kysonlok@gmail.com> | 2017-05-17 18:18:45 +0800 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2017-05-26 08:04:15 +0200 |
commit | abbfcc85259a4f6658c61e99dd3d2d3567e3eb3a (patch) | |
tree | 005f2cb004e90efa6868b0c736edcfea265a5f92 /target/linux/lantiq/base-files/lib/functions/lantiq.sh | |
parent | da472e5b30f63b7f214b1d646ef0d955cbf3f295 (diff) | |
download | upstream-abbfcc85259a4f6658c61e99dd3d2d3567e3eb3a.tar.gz upstream-abbfcc85259a4f6658c61e99dd3d2d3567e3eb3a.tar.bz2 upstream-abbfcc85259a4f6658c61e99dd3d2d3567e3eb3a.zip |
ramips: add support for GL-inet GL-MT300N-V2
This patch adds supports for the GL-inet GL-MT300N-V2.
Specification:
- SoC: MediaTek MT7628AN
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 128 MiB DDR
- Ethernet: 1 x WAN (100 Mbps) and 1 x LAN (100 Mbps)
- USB: 1 x USB 2.0 port
- Button: 1 x switch button, 1 x reset button
- LED: 3 x LEDS (system power led is not GPIO controller)
- UART: 1 x UART on PCB (JP1: 3.3V, RX, TX, GND)
Installation through Luci:
- The original firmware is LEDE, so both LuCI or sysupgrade can be used.
- Do not keep settings, for sysupgrade please use the -n option.
Installation through bootloader webserver:
- Plug power and hold reset button until red LED blink to bright.
- Install sysupgrade image using web interface on 192.168.1.1.
Signed-off-by: Kyson Lok <kysonlok@gmail.com>
[match maximum image size with firmware partition]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/lantiq/base-files/lib/functions/lantiq.sh')
0 files changed, 0 insertions, 0 deletions