diff options
| author | Thomas Nixon <tom@tomn.co.uk> | 2017-04-23 22:07:17 +0100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-07-07 07:13:24 +0200 |
| commit | 50e3659703113df036e755e0d483172c3b809242 (patch) | |
| tree | 195123601acacf16941fd02d3186980a54cec4c5 /target/linux/lantiq/base-files/etc/board.d | |
| parent | 08cd5b769deb4833b7a20208fa15674f52023fea (diff) | |
| download | upstream-50e3659703113df036e755e0d483172c3b809242.tar.gz upstream-50e3659703113df036e755e0d483172c3b809242.tar.bz2 upstream-50e3659703113df036e755e0d483172c3b809242.zip | |
lantiq: add Netgear DM200 support
Netgear DM200 is an inexpensive VDSL modem:
CPU: VRX220 MIPS 34Kc 5.6 @ 500Mhz
RAM: 64MiB
Flash: 8MiB
Ethernet: 1x100M
DSL: VDSL2+, ADSL2+
reset button, 3x bi-color LEDs
Serial port is 115200 baud, on the 4 pin header; pins from the bottom to
top are GND, RX, TX.
To upgrade from the vendor firmware, upload factory.img
The DM200 bootloader supports flashing over TFTP; hold the reset button
while powering on the device, and wait for the power light to start
flashing green before releasing. The device is now listening on
192.168.0.1/24, and can be sent a factory.img or a netgear image with a
TFTP put.
Once the image is loaded, it will be written to the flash, and the
device will reboot; this will take a few minutes.
Thanks to Edward O'Callaghan and Baptiste Jonglez, who implemented their
own ports for this device and provided valuable feedback.
Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
Diffstat (limited to 'target/linux/lantiq/base-files/etc/board.d')
| -rwxr-xr-x | target/linux/lantiq/base-files/etc/board.d/01_leds | 3 | ||||
| -rwxr-xr-x | target/linux/lantiq/base-files/etc/board.d/02_network | 6 |
2 files changed, 9 insertions, 0 deletions
diff --git a/target/linux/lantiq/base-files/etc/board.d/01_leds b/target/linux/lantiq/base-files/etc/board.d/01_leds index 634f479789..817e2e91c5 100755 --- a/target/linux/lantiq/base-files/etc/board.d/01_leds +++ b/target/linux/lantiq/base-files/etc/board.d/01_leds @@ -50,6 +50,9 @@ ARV7519RW22) BTHOMEHUBV5A) ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0" ;; +DM200) + ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0" + ;; FRITZ7320) ucidef_set_led_netdev "wifi" "wifi" "fritz7320:green:wlan" "wlan0" ;; diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network index 55498b9f59..c245a8fa75 100755 --- a/target/linux/lantiq/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/base-files/etc/board.d/02_network @@ -100,6 +100,12 @@ DGN3500*) "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0" ;; +DM200) + lan_mac=$(mtd_get_mac_binary ART 0) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan 'eth0' + ;; + EASY80920NAND|EASY80920NOR) lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) wan_mac=$(macaddr_add "$lan_mac" 1) |