upgrade to 2.6.37

SVN-Revision: 26225

1 files changed, 0 insertions, 162 deletions

diff --git a/target/linux/kirkwood/patches/100-dockstar.patch b/target/linux/kirkwood/patches/100-dockstar.patch
deleted file mode 100644
index 59334b4cda..0000000000
--- a/target/linux/kirkwood/patches/100-dockstar.patch
+++ /dev/null
@@ -1,162 +0,0 @@
-This patch adds support for the Seagate FreeAgent DockStar, a Marvell
-Sheevaplug derivative.  I have already registered the DOCKSTAR machine
-ID.
-
-Signed-off-by: Eric Cooper <ecc@xxxxxxx>
----
- arch/arm/mach-kirkwood/Kconfig          |    6 ++
- arch/arm/mach-kirkwood/Makefile         |    1 +
- arch/arm/mach-kirkwood/dockstar-setup.c |  112 +++++++++++++++++++++++++++++++
- arch/arm/tools/mach-types               |    1 +
- 4 files changed, 120 insertions(+), 0 deletions(-)
- create mode 100644 arch/arm/mach-kirkwood/dockstar-setup.c
-
---- a/arch/arm/mach-kirkwood/Kconfig
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -99,6 +99,12 @@ config MACH_NET5BIG_V2
- 	  Say 'Y' here if you want your kernel to support the
- 	  LaCie 5Big Network v2 NAS.
- 
-+config MACH_DOCKSTAR
-+	bool "Seagate FreeAgent DockStar"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Seagate FreeAgent DockStar.
-+
- endmenu
- 
- endif
---- a/arch/arm/mach-kirkwood/Makefile
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88
- obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
- obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
- obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
-+obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
- obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
- obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
- obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
-@@ -0,0 +1,121 @@
-+/*
-+ * arch/arm/mach-kirkwood/dockstar-setup.c
-+ *
-+ * Seagate FreeAgent DockStar Setup
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/ata_platform.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/gpio.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <mach/kirkwood.h>
-+#include <plat/mvsdio.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+static struct mtd_partition dockstar_nand_parts[] = {
-+	{
-+		.name = "u-boot",
-+		.offset = 0,
-+		.size = SZ_1M
-+	}, 	{
-+		.name = "second_stage_u-boot",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = SZ_1M
-+	}, {
-+		.name = "uImage",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = SZ_1M + SZ_2M,
-+	}, {
-+		.name = "rootfs",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = SZ_32M,
-+	}, {
-+		.name = "data",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = MTDPART_SIZ_FULL
-+	},
-+};
-+
-+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
-+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-+};
-+
-+static struct gpio_led dockstar_led_pins[] = {
-+	{
-+		.name			= "dockstar:green:health",
-+		.default_trigger	= "default-on",
-+		.gpio			= 46,
-+		.active_low		= 1,
-+	},
-+	{
-+		.name			= "dockstar:orange:misc",
-+		.default_trigger	= "none",
-+		.gpio			= 47,
-+		.active_low		= 1,
-+	},
-+};
-+
-+static struct gpio_led_platform_data dockstar_led_data = {
-+	.leds		= dockstar_led_pins,
-+	.num_leds	= ARRAY_SIZE(dockstar_led_pins),
-+};
-+
-+static struct platform_device dockstar_leds = {
-+	.name	= "leds-gpio",
-+	.id	= -1,
-+	.dev	= {
-+		.platform_data	= &dockstar_led_data,
-+	}
-+};
-+
-+static unsigned int dockstar_mpp_config[] __initdata = {
-+	MPP29_GPIO,	/* USB Power Enable */
-+	MPP46_GPIO,	/* LED green */
-+	MPP47_GPIO,	/* LED orange */
-+	0
-+};
-+
-+static void __init dockstar_init(void)
-+{
-+	/*
-+	 * Basic setup. Needs to be called early.
-+	 */
-+	kirkwood_init();
-+
-+	/* setup gpio pin select */
-+	kirkwood_mpp_conf(dockstar_mpp_config);
-+
-+	kirkwood_uart0_init();
-+
-+	if (gpio_request(29, "USB Power Enable") != 0 ||
-+	    gpio_direction_output(29, 1) != 0)
-+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
-+	kirkwood_ehci_init();
-+
-+	kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
-+
-+	kirkwood_ge00_init(&dockstar_ge00_data);
-+
-+	platform_device_register(&dockstar_leds);
-+}
-+
-+MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
-+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
-+	.boot_params	= 0x00000100,
-+	.init_machine	= dockstar_init,
-+	.map_io		= kirkwood_map_io,
-+	.init_irq	= kirkwood_init_irq,
-+	.timer		= &kirkwood_timer,
-+MACHINE_END