kirkwood: drop kernel 5.4 support

It has been 3 months since we switched this target to 5.10, now we can
remove the 5.4 files.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>

1 files changed, 0 insertions, 76 deletions

diff --git a/target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch b/target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch
deleted file mode 100644
index c6452c55a3..0000000000
--- a/target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch
+++ /dev/null
@@ -1,76 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
-+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
-@@ -19,6 +19,13 @@
- 		reg = <0x00000000 0x10000000>;
- 	};
- 
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_power;
-+		led-running = &led_power;
-+		led-upgrade = &led_power;
-+	};
-+
- 	chosen {
- 		bootargs = "console=ttyS0,115200n8 earlyprintk";
- 		stdout-path = &uart0;
-@@ -115,7 +122,7 @@
- 			      &pmx_led_blue_backup >;
- 		pinctrl-names = "default";
- 
--		power_led {
-+		led_power: power_led {
- 			label = "status:blue:power_led";
- 			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
- 			default-state = "keep";
-@@ -129,11 +136,13 @@
- 		disk1_led {
- 			label = "status:blue:disk1_led";
- 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "ata1";
- 		};
- 
- 		disk2_led {
- 			label = "status:blue:disk2_led";
- 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "ata2";
- 		};
- 
- 		backup_led {
-@@ -150,7 +159,13 @@
- 
- 		power-button {
- 			label = "Power Button";
--			linux,code = <KEY_POWER>;
-+			/* Power button and INT pin from PHY are both connected
-+			 * to this GPIO. Every network restart causes PHY restart
-+			 * and button is pressed. It's difficult to use it as
-+			 * KEY_POWER without changes in kernel (or netifd) so
-+			 * the button is configured as regular one.
-+			 */
-+			linux,code = <BTN_1>;
- 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- 		};
- 
-@@ -208,18 +223,13 @@
- 	};
- 
- 	partition@200000 {
--		label = "uImage";
-+		label = "kernel";
- 		reg = <0x0200000 0x600000>;
- 	};
- 
- 	partition@800000 {
--		label = "minirootfs";
--		reg = <0x0800000 0x1000000>;
--	};
--
--	partition@1800000 {
--		label = "jffs2";
--		reg = <0x1800000 0x6800000>;
-+		label = "ubi";
-+		reg = <0x0800000 0x7800000>;
- 	};
- };
-