kirkwood: drop 4.3 support

Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>

SVN-Revision: 48499

1 files changed, 0 insertions, 300 deletions

diff --git a/target/linux/kirkwood/patches-4.3/170-nsa310s.patch b/target/linux/kirkwood/patches-4.3/170-nsa310s.patch
deleted file mode 100644
index c15aacfa4c..0000000000
--- a/target/linux/kirkwood/patches-4.3/170-nsa310s.patch
+++ /dev/null
@@ -1,300 +0,0 @@
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
-@@ -0,0 +1,287 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+	model = "ZyXEL NSA310S";
-+	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x10000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+		stdout-path = &uart0;
-+	};
-+
-+	mbus {
-+		pcie-controller {
-+			status = "okay";
-+
-+			pcie@1,0 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pinctrl-names = "default";
-+
-+			pmx_sata0: pmx-sata0 {
-+				marvell,pins;
-+				marvell,function = "sata0";
-+			};
-+			pmx_sata1: pmx-sata1 {
-+				marvell,pins;
-+				marvell,function = "sata1";
-+			};
-+			pmx_usb_power: pmx-usb-power {
-+				marvell,pins = "mpp21";
-+				marvell,function = "gpio";
-+			};
-+			pmx_pwr_off: pmx-pwr-off {
-+				marvell,pins = "mpp27";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_reset: pmx-btn-reset {
-+				marvell,pins = "mpp24";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_copy: pmx-btn-copy {
-+				marvell,pins = "mpp25";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_power: pmx-btn-power {
-+				marvell,pins = "mpp26";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd2_green: pmx-led-hdd2-green {
-+				marvell,pins = "mpp34";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd2_red: pmx-led-hdd2-red {
-+				marvell,pins = "mpp12";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_usb_green: pmx-led-usb-green {
-+				marvell,pins = "mpp15";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_copy_green: pmx-led-copy-green {
-+				marvell,pins = "mpp22";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_copy_red: pmx-led-copy-red {
-+				marvell,pins = "mpp23";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_sys_green: pmx-led-sys-green {
-+				marvell,pins = "mpp28";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_sys_orange: pmx-led-sys-orange {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd1_green: pmx-led-hdd1-green {
-+				marvell,pins = "mpp16";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd1_red: pmx-led-hdd1-red {
-+				marvell,pins = "mpp13";
-+				marvell,function = "gpio";
-+			};
-+			pmx_pwr_sata1: pmx-pwr-sata1 {
-+				marvell,pins = "mpp33";
-+				marvell,function = "gpio";
-+			};
-+		};
-+
-+		serial@12000 {
-+			status = "okay";
-+		};
-+
-+		sata@80000 {
-+			status = "okay";
-+			nr-ports = <2>;
-+		};
-+
-+		rtc@10300 {
-+			status = "disabled";
-+		};
-+
-+		i2c@11000 {
-+			status = "okay";
-+			ht1382: rtc@68 {
-+				compatible = "htk,ht1382";
-+				reg = <0x68>;
-+			};
-+		};
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
-+
-+		usb0_power: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "USB Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			enable-active-high;
-+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		sata1_power: regulator@2 {
-+			compatible = "regulator-fixed";
-+			reg = <2>;
-+			regulator-name = "SATA1 Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			enable-active-high;
-+			gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
-+		pinctrl-names = "default";
-+
-+		button@1 {
-+			label = "Power Button";
-+			linux,code = <KEY_POWER>;
-+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-+		};
-+		button@2 {
-+			label = "Copy Button";
-+			linux,code = <KEY_COPY>;
-+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-+		};
-+		button@3 {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
-+				&pmx_led_usb_green
-+				&pmx_led_sys_green &pmx_led_sys_orange
-+				&pmx_led_copy_green &pmx_led_copy_red
-+				&pmx_led_hdd1_green &pmx_led_hdd1_red>;
-+		pinctrl-names = "default";
-+
-+		green-sys {
-+			label = "nsa310s:green:sys";
-+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "timer";
-+		};
-+		orange-sys {
-+			label = "nsa310s:orange:sys";
-+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-hdd1 {
-+			label = "nsa310s:green:hdd1";
-+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-hdd1 {
-+			label = "nsa310s:red:hdd1";
-+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-hdd2 {
-+			label = "nsa310s:green:hdd2";
-+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-hdd2 {
-+			label = "nsa310s:red:hdd2";
-+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-usb {
-+			label = "nsa310s:green:usb";
-+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-copy {
-+			label = "nsa310s:green:copy";
-+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "ide-disk";
-+		};
-+		red-copy {
-+			label = "nsa310s:red:copy";
-+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	gpio_poweroff {
-+		compatible = "gpio-poweroff";
-+		pinctrl-0 = <&pmx_pwr_off>;
-+		pinctrl-names = "default";
-+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	chip-delay = <35>;
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0000000 0xe0000>;
-+	};
-+
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
-+	};
-+
-+	partition@100000 {
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
-+	};
-+
-+	partition@200000 {
-+		label = "root";
-+		reg = <0x200000 0x7e00000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+	ethphy0: ethernet-phy@1 {
-+		compatible = "marvell,88e1318s";
-+		reg = <1>;
-+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
-+							<0x1 0x10 0x0 0x1017>,
-+							<0x1 0x11 0x0 0x4408>,
-+							<0x1 0x16 0x0 0x0>,
-+							<0x1 0x4 0x0 0x1e1>,
-+							<0x1 0x9 0x0 0x300>,
-+							<0x1 0x10 0x0 0x3860>,
-+							<0x1 0x0 0x0 0x9140>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -196,6 +196,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-ns2mini.dtb \
- 	kirkwood-nsa310.dtb \
- 	kirkwood-nsa310a.dtb \
-+	kirkwood-nsa310s.dtb \
- 	kirkwood-openblocks_a6.dtb \
- 	kirkwood-openblocks_a7.dtb \
- 	kirkwood-openrd-base.dtb \