kirkwood: convert DTS patches into plain DTS files

Move DTS files newly created by patch files to files directory. This will make
these files much more maintainable.

Patching the kernel Makefile is unnecessary, as the DTS files specified in
DEVICE_DTS will be compiled by OpenWrt buildroot anyway.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 264 deletions

diff --git a/target/linux/kirkwood/patches-4.19/104-ea3500.patch b/target/linux/kirkwood/patches-4.19/104-ea3500.patch
deleted file mode 100644
index 04a919e072..0000000000
--- a/target/linux/kirkwood/patches-4.19/104-ea3500.patch
+++ /dev/null
@@ -1,264 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -269,6 +269,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-linkstation-lswsxl.dtb \
- 	kirkwood-linkstation-lswvl.dtb \
- 	kirkwood-linkstation-lswxl.dtb \
-+	kirkwood-linksys-audi.dtb \
- 	kirkwood-linksys-viper.dtb \
- 	kirkwood-lschlv2.dtb \
- 	kirkwood-lsxhl.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,251 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ * (c) 2014 Dan Walters <dan@walters.io>
-+ *
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+	model = "Linksys Audi (EA3500)";
-+	compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x4000000>;
-+	};
-+
-+	aliases {
-+		led-boot = &led_power;
-+		led-failsafe = &led_power;
-+		led-running = &led_power;
-+		led-upgrade = &led_power;
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+		pinctrl-names = "default";
-+
-+		wps {
-+			label = "WPS Button";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		reset {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = < &pmx_led_green_power >;
-+		pinctrl-names = "default";
-+
-+		led_power: power {
-+			label = "audi:green:power";
-+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+			default-state = "on";
-+		};
-+	};
-+
-+	switches {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		mvsw61xx@10 {
-+			compatible = "marvell,88e6171";
-+			status = "okay";
-+			reg = <0x10>;
-+
-+			mii-bus = <&mdio>;
-+			cpu-port-0 = <5>;
-+			cpu-port-1 = <6>;
-+			is-indirect;
-+		};
-+	};
-+
-+	dsa {
-+		compatible = "marvell,dsa";
-+		#address-cells = <2>;
-+		#size-cells = <0>;
-+
-+		dsa,ethernet = <&eth0port>;
-+		dsa,mii-bus = <&mdio>;
-+
-+		switch@16,0 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <16 0>;	/* MDIO address 16, switch 0 in tree */
-+
-+			port@0 {
-+				reg = <0>;
-+				label = "ethernet1";
-+			};
-+
-+			port@1 {
-+				reg = <1>;
-+				label = "ethernet2";
-+			};
-+
-+			port@2 {
-+				reg = <2>;
-+				label = "ethernet3";
-+			};
-+
-+			port@3 {
-+				reg = <3>;
-+				label = "ethernet4";
-+			};
-+
-+			port@4 {
-+				reg = <4>;
-+				label = "internet";
-+			};
-+
-+			port@5 {
-+				reg = <5>;
-+				label = "cpu";
-+			};
-+		};
-+	};
-+};
-+
-+&pinctrl {
-+	pmx_led_green_power: pmx-led-green-power {
-+		marvell,pins = "mpp7";
-+		marvell,function = "gpo";
-+	};
-+	pmx_btn_wps: pmx-btn-wps {
-+		marvell,pins = "mpp47";
-+		marvell,function = "gpio";
-+	};
-+	pmx_btn_reset: pmx-btn-reset {
-+		marvell,pins = "mpp48";
-+		marvell,function = "gpio";
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	pinctrl-0 = <&pmx_nand>;
-+	pinctrl-names = "default";
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "u-boot";
-+			reg = <0x0 0x80000>;
-+			read-only;
-+		};
-+
-+		partition@80000 {
-+			label = "u_env";
-+			reg = <0x80000 0x4000>;
-+		};
-+
-+		partition@84000 {
-+			label = "s_env";
-+			reg = <0x84000 0x4000>;
-+		};
-+
-+		partition@200000 {
-+			label = "kernel1";
-+			reg = <0x200000 0x290000>;
-+		};
-+
-+		partition@490000 {
-+			label = "rootfs1";
-+			reg = <0x490000 0x1170000>;
-+		};
-+
-+		partition@1600000 {
-+			label = "kernel2";
-+			reg = <0x1600000 0x290000>;
-+		};
-+
-+		partition@1890000 {
-+			label = "rootfs2";
-+			reg = <0x1890000 0x1170000>;
-+		};
-+
-+		partition@2a00000 {
-+			label = "syscfg";
-+			reg = <0x2a00000  0x1600000>;
-+		};
-+
-+		partition@88000 {
-+			label = "unused";
-+			reg = <0x88000 0x178000>;
-+		};
-+
-+	};
-+};
-+
-+&pciec {
-+	status = "okay";
-+};
-+
-+&pcie0 {
-+	status = "okay";
-+};
-+
-+&pcie1 {
-+	status = "okay";
-+};
-+
-+&mdio {
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};
-+
-+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
-+ * fixed speed and duplex.
-+ */
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
-+
-+/* eth1 is connected to the switch at port 6. However DSA only supports a
-+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
-+ */
-+&eth1 {
-+	status = "okay";
-+	ethernet1-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
-+
-+/* There is no battery on the board, so the RTC does not keep
-+ * time when there is no power, making it useless.
-+ */
-+&rtc {
-+	status = "disabled";
-+};