diff options
| author | Paul Wassi <p.wassi@gmx.at> | 2018-03-12 20:50:48 +0100 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2018-03-20 21:45:27 +0100 |
| commit | 1447784a8c33145dd22dbe5f0c7bab56ab9b7d6f (patch) | |
| tree | c372de1ef07b49a48c51b36d4262b48483266078 /target/linux/kirkwood/patches-4.14/105-ea4500.patch | |
| parent | f21cd9640052a733e1759519e3d7ca0f9453653b (diff) | |
| download | upstream-1447784a8c33145dd22dbe5f0c7bab56ab9b7d6f.tar.gz upstream-1447784a8c33145dd22dbe5f0c7bab56ab9b7d6f.tar.bz2 upstream-1447784a8c33145dd22dbe5f0c7bab56ab9b7d6f.zip | |
kirkwood: add kernel 4.14 support
Add patches for 4.14, undoing upstream changes for Linksys devices
regarding DSA. Instead, the switchdev driver marvell,88e6171 is used.
Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Tested-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Diffstat (limited to 'target/linux/kirkwood/patches-4.14/105-ea4500.patch')
| -rw-r--r-- | target/linux/kirkwood/patches-4.14/105-ea4500.patch | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/target/linux/kirkwood/patches-4.14/105-ea4500.patch b/target/linux/kirkwood/patches-4.14/105-ea4500.patch new file mode 100644 index 0000000000..6cc3de221b --- /dev/null +++ b/target/linux/kirkwood/patches-4.14/105-ea4500.patch @@ -0,0 +1,121 @@ +--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts ++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts +@@ -69,9 +69,18 @@ + }; + }; + +- dsa { +- status = "disabled"; ++ mvsw61xx { ++ compatible = "marvell,88e6171"; ++ status = "okay"; ++ reg = <0x10>; ++ ++ mii-bus = <&mdio>; ++ cpu-port-0 = <5>; ++ cpu-port-1 = <6>; ++ is-indirect; ++ }; + ++ dsa { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; +@@ -163,22 +172,22 @@ + }; + + partition@200000 { +- label = "kernel"; ++ label = "kernel1"; + reg = <0x200000 0x2A0000>; + }; + + partition@4A0000 { +- label = "rootfs"; ++ label = "rootfs1"; + reg = <0x4A0000 0x1760000>; + }; + + partition@1C00000 { +- label = "alt_kernel"; ++ label = "kernel2"; + reg = <0x1C00000 0x2A0000>; + }; + + partition@1EA0000 { +- label = "alt_rootfs"; ++ label = "rootfs2"; + reg = <0x1EA0000 0x1760000>; + }; + +@@ -209,53 +218,6 @@ + + &mdio { + status = "okay"; +- +- switch@10 { +- compatible = "marvell,mv88e6085"; +- #address-cells = <1>; +- #size-cells = <0>; +- reg = <16>; +- +- ports { +- #address-cells = <1>; +- #size-cells = <0>; +- +- port@0 { +- reg = <0>; +- label = "ethernet1"; +- }; +- +- port@1 { +- reg = <1>; +- label = "ethernet2"; +- }; +- +- port@2 { +- reg = <2>; +- label = "ethernet3"; +- }; +- +- port@3 { +- reg = <3>; +- label = "ethernet4"; +- }; +- +- port@4 { +- reg = <4>; +- label = "internet"; +- }; +- +- port@5 { +- reg = <5>; +- label = "cpu"; +- ethernet = <ð0port>; +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; +- }; +- }; +- }; + }; + + &uart0 { +@@ -274,10 +236,14 @@ + }; + + /* eth1 is connected to the switch at port 6. However DSA only supports a +- * single CPU port. So leave this port disabled to avoid confusion. ++ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion. + */ + ð1 { +- status = "disabled"; ++ status = "okay"; ++ ethernet1-port@0 { ++ speed = <1000>; ++ duplex = <1>; ++ }; + }; + + /* There is no battery on the board, so the RTC does not keep |