kirkwood: drop 3.18

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49021

12 files changed, 0 insertions, 1180 deletions

diff --git a/target/linux/kirkwood/patches-3.18/100-find_active_root.patch b/target/linux/kirkwood/patches-3.18/100-find_active_root.patch
deleted file mode 100644
index e32b6089d1..0000000000
--- a/target/linux/kirkwood/patches-3.18/100-find_active_root.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
-+static int mangled_rootblock;
-+
- static int parse_ofpart_partitions(struct mtd_info *master,
- 				   struct mtd_partition **pparts,
- 				   struct mtd_part_parser_data *data)
- {
- 	struct device_node *node;
- 	const char *partname;
-+	const char *owrtpart = "ubi";
- 	struct device_node *pp;
- 	int nr_parts, i;
- 
-@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc
- 		(*pparts)[i].offset = of_read_number(reg, a_cells);
- 		(*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
- 
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
-+		if (mangled_rootblock && (i == mangled_rootblock)) {
-+				partname = owrtpart;
-+		} else {
-+			partname = of_get_property(pp, "label", &len);
-+
-+			if (!partname)
-+				partname = of_get_property(pp, "name", &len);
-+		}
-+
- 		(*pparts)[i].name = partname;
- 
- 		if (of_get_property(pp, "read-only", &len))
-@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi
- 	return 0;
- }
- 
-+static int __init active_root(char *str)
-+{
-+	get_option(&str, &mangled_rootblock);
-+
-+	if (!mangled_rootblock)
-+		return 1;
-+
-+	return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- 	deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/kirkwood/patches-3.18/110-ib62x0.patch b/target/linux/kirkwood/patches-3.18/110-ib62x0.patch
deleted file mode 100644
index 153c41b782..0000000000
--- a/target/linux/kirkwood/patches-3.18/110-ib62x0.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
-@@ -117,13 +117,13 @@
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x600000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@700000 {
-+	partition@200000 {
- 		label = "root";
--		reg = <0x0700000 0xf900000>;
-+		reg = <0x200000 0xfe00000>;
- 	};
- 
- };
diff --git a/target/linux/kirkwood/patches-3.18/120-iomega_ix2_200.patch b/target/linux/kirkwood/patches-3.18/120-iomega_ix2_200.patch
deleted file mode 100644
index 33f7004a9d..0000000000
--- a/target/linux/kirkwood/patches-3.18/120-iomega_ix2_200.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -192,8 +192,8 @@
- 	};
- 
- 	partition@400000 {
--		label = "uInitrd";
--		reg = <0x540000 0x1000000>;
-+		label = "rootfs";
-+		reg = <0x400000 0x1C00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-3.18/130-iconnect.patch b/target/linux/kirkwood/patches-3.18/130-iconnect.patch
deleted file mode 100644
index c95579d793..0000000000
--- a/target/linux/kirkwood/patches-3.18/130-iconnect.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -155,28 +155,23 @@
- 	status = "okay";
- 
- 	partition@0 {
--		label = "uboot";
--		reg = <0x0000000 0xc0000>;
-+		label = "u-boot";
-+		reg = <0x0000000 0xe0000>;
- 	};
- 
--	partition@a0000 {
--		label = "env";
--		reg = <0xa0000 0x20000>;
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
- 	};
- 
- 	partition@100000 {
--		label = "zImage";
--		reg = <0x100000 0x300000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@540000 {
--		label = "initrd";
--		reg = <0x540000 0x300000>;
--	};
--
--	partition@980000 {
--		label = "boot";
--		reg = <0x980000 0x1f400000>;
-+	partition@200000 {
-+		label = "root";
-+		reg = <0x200000 0x1fe00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-3.18/140-dockstar.patch b/target/linux/kirkwood/patches-3.18/140-dockstar.patch
deleted file mode 100644
index f66e19d27f..0000000000
--- a/target/linux/kirkwood/patches-3.18/140-dockstar.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -77,18 +77,22 @@
- 
- 	partition@0 {
- 		label = "u-boot";
--		reg = <0x0000000 0x100000>;
--		read-only;
-+		reg = <0x0000000 0xe0000>;
-+	};
-+
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@500000 {
--		label = "data";
--		reg = <0x0500000 0xfb00000>;
-+	partition@200000 {
-+		label = "ubi";
-+		reg = <0x200000 0xfe00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-3.18/150-pogoplug_e02.patch b/target/linux/kirkwood/patches-3.18/150-pogoplug_e02.patch
deleted file mode 100644
index eb570738f4..0000000000
--- a/target/linux/kirkwood/patches-3.18/150-pogoplug_e02.patch
+++ /dev/null
@@ -1,127 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -147,6 +147,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- 	kirkwood-openrd-base.dtb \
- 	kirkwood-openrd-client.dtb \
- 	kirkwood-openrd-ultimate.dtb \
-+	kirkwood-pogo_e02.dtb \
- 	kirkwood-rd88f6192.dtb \
- 	kirkwood-rd88f6281-z0.dtb \
- 	kirkwood-rd88f6281-a.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-@@ -0,0 +1,114 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+	model = "Cloud Engines Pogoplug E02";
-+	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x10000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pmx_usb_power_enable: pmx-usb-power-enable {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_green: pmx-led_green {
-+				marvell,pins = "mpp48";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_orange: pmx-led_orange {
-+				marvell,pins = "mpp49";
-+				marvell,function = "gpio";
-+			};
-+		};
-+		serial@12000 {
-+			status = "ok";
-+		};
-+	};
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
-+			      &pmx_led_green >;
-+		pinctrl-names = "default";
-+
-+		health {
-+			label = "pogo_e02:green:health";
-+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+			default-state = "keep";
-+		};
-+		fault {
-+			label = "pogo_e02:orange:fault";
-+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_usb_power_enable>;
-+		pinctrl-names = "default";
-+
-+		usb_power: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "USB Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			enable-active-high;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&nand {
-+	chip-delay = <40>;
-+	status = "okay";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0000000 0x100000>;
-+		read-only;
-+	};
-+
-+	partition@100000 {
-+		label = "uImage";
-+		reg = <0x0100000 0x400000>;
-+	};
-+
-+	partition@500000 {
-+		label = "pogoplug";
-+		reg = <0x0500000 0x2000000>;
-+	};
-+
-+	partition@2500000 {
-+		label = "root";
-+		reg = <0x02500000 0x5b00000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+
-+	ethphy0: ethernet-phy@0 {
-+		reg = <0>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};
diff --git a/target/linux/kirkwood/patches-3.18/160-ea4500.patch b/target/linux/kirkwood/patches-3.18/160-ea4500.patch
deleted file mode 100644
index 7a60fa58b6..0000000000
--- a/target/linux/kirkwood/patches-3.18/160-ea4500.patch
+++ /dev/null
@@ -1,200 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -128,6 +128,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- 	kirkwood-is2.dtb \
- 	kirkwood-km_kirkwood.dtb \
- 	kirkwood-laplug.dtb \
-+	kirkwood-linksys-viper.dtb \
- 	kirkwood-lschlv2.dtb \
- 	kirkwood-lsxhl.dtb \
- 	kirkwood-mplcec4.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -0,0 +1,187 @@
-+/*
-+ * kirkwood-linksys-viper.dts - Device Tree file for Linksys E4200v2/EA4500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+	model = "Linksys E4200v2 / EA4500";
-+	compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x8000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+	};
-+
-+	mbus {
-+		pcie-controller {
-+			status = "okay";
-+
-+			pcie@1,0 {
-+				status = "okay";
-+			};
-+
-+			pcie@2,0 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pmx_led_white_health: pmx-led-white-health {
-+				marvell,pins = "mpp7";
-+				marvell,function = "gpo";
-+			};
-+			pmx_led_white_pulse: pmx-led-white-pulse {
-+				marvell,pins = "mpp14";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_wps: pmx-btn-wps {
-+				marvell,pins = "mpp47";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_reset: pmx-btn-reset {
-+				marvell,pins = "mpp48";
-+				marvell,function = "gpio";
-+			};
-+		};
-+
-+		rtc@10300 {
-+			status = "disabled";
-+		};
-+
-+		serial@12000 {
-+			status = "okay";
-+		};
-+
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+		pinctrl-names = "default";
-+
-+		button@15 {
-+			label = "WPS Button";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		button@16 {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
-+		pinctrl-names = "default";
-+
-+		white-health {
-+			label = "viper:white:health";
-+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		white-pulse {
-+			label = "viper:white:pulse";
-+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	mvsw61xx {
-+		compatible = "marvell,88e6171";
-+		status = "okay";
-+		reg = <0x10>;
-+
-+		mii-bus = <&mdio>;
-+		cpu-port-0 = <5>;
-+		cpu-port-1 = <6>;
-+		is-indirect;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	pinctrl-0 = <&pmx_nand>;
-+	pinctrl-names = "default";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0 0x80000>;
-+	};
-+
-+	partition@80000 {
-+		label = "u_env";
-+		reg = <0x80000 0x20000>;
-+	};
-+
-+	partition@a0000 {
-+		label = "s_env";
-+		reg = <0xa0000 0x20000>;
-+	};
-+
-+	partition@200000 {
-+		label = "kernel1";
-+		reg = <0x200000 0x1a00000>;
-+	};
-+
-+	partition@4a0000 {
-+		label = "rootfs1";
-+		reg = <0x4a0000 0x1760000>;
-+	};
-+
-+	partition@1c00000 {
-+		label = "kernel2";
-+		reg = <0x1c00000 0x1a00000>;
-+	};
-+
-+	partition@1ea0000 {
-+		label = "rootfs2";
-+		reg = <0x1ea0000 0x1760000>;
-+	};
-+
-+	partition@3600000 {
-+		label = "syscfg";
-+		reg = <0x3600000 0x4a00000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
-+
-+&eth1 {
-+	status = "okay";
-+	ethernet1-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
diff --git a/target/linux/kirkwood/patches-3.18/170-ea3500.patch b/target/linux/kirkwood/patches-3.18/170-ea3500.patch
deleted file mode 100644
index 6a03c41290..0000000000
--- a/target/linux/kirkwood/patches-3.18/170-ea3500.patch
+++ /dev/null
@@ -1,192 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -128,6 +128,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- 	kirkwood-is2.dtb \
- 	kirkwood-km_kirkwood.dtb \
- 	kirkwood-laplug.dtb \
-+	kirkwood-linksys-audi.dtb \
- 	kirkwood-linksys-viper.dtb \
- 	kirkwood-lschlv2.dtb \
- 	kirkwood-lsxhl.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,179 @@
-+/*
-+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ * (c) 2014 Dan Walters <dan@walters.io>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+	model = "Linksys EA3500";
-+	compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x4000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+	};
-+
-+	mbus {
-+		pcie-controller {
-+			status = "okay";
-+
-+			pcie@1,0 {
-+				status = "okay";
-+			};
-+
-+			pcie@2,0 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pmx_led_green_power: pmx-led-green-power {
-+				marvell,pins = "mpp7";
-+				marvell,function = "gpo";
-+			};
-+			pmx_btn_wps: pmx-btn-wps {
-+				marvell,pins = "mpp47";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_reset: pmx-btn-reset {
-+				marvell,pins = "mpp48";
-+				marvell,function = "gpio";
-+			};
-+		};
-+
-+		rtc@10300 {
-+			status = "disabled";
-+		};
-+
-+		serial@12000 {
-+			status = "okay";
-+		};
-+
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+		pinctrl-names = "default";
-+
-+		button@15 {
-+			label = "WPS Button";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		button@16 {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = < &pmx_led_green_power >;
-+		pinctrl-names = "default";
-+
-+		green-power {
-+			label = "audi:green:power";
-+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	mvsw61xx {
-+		compatible = "marvell,88e6171";
-+		status = "okay";
-+		reg = <0x10>;
-+
-+		mii-bus = <&mdio>;
-+		cpu-port-0 = <5>;
-+		cpu-port-1 = <6>;
-+		is-indirect;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	pinctrl-0 = <&pmx_nand>;
-+	pinctrl-names = "default";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0 0x80000>;
-+	};
-+
-+	partition@80000 {
-+		label = "u_env";
-+		reg = <0x80000 0x4000>;
-+	};
-+
-+	partition@84000 {
-+		label = "s_env";
-+		reg = <0x84000 0x4000>;
-+	};
-+
-+	partition@200000 {
-+		label = "kernel1";
-+		reg = <0x200000 0x1400000>;
-+	};
-+
-+	partition@490000 {
-+		label = "rootfs1";
-+		reg = <0x490000 0x1170000>;
-+	};
-+
-+	partition@1600000 {
-+		label = "kernel2";
-+		reg = <0x1600000 0x1400000>;
-+	};
-+
-+	partition@1890000 {
-+		label = "rootfs2";
-+		reg = <0x1890000 0x1170000>;
-+	};
-+
-+	partition@2a00000 {
-+		label = "syscfg";
-+		reg = <0x2a00000  0x1600000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
-+
-+&eth1 {
-+	status = "okay";
-+	ethernet1-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
diff --git a/target/linux/kirkwood/patches-3.18/180-goflexhome.patch b/target/linux/kirkwood/patches-3.18/180-goflexhome.patch
deleted file mode 100644
index 95e67b91e2..0000000000
--- a/target/linux/kirkwood/patches-3.18/180-goflexhome.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-Index: linux-3.18.27/arch/arm/boot/dts/Makefile
-===================================================================
---- linux-3.18.27.orig/arch/arm/boot/dts/Makefile
-+++ linux-3.18.27/arch/arm/boot/dts/Makefile
-@@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- 	kirkwood-ds411.dtb \
- 	kirkwood-ds411j.dtb \
- 	kirkwood-ds411slim.dtb \
-+	kirkwood-goflexhome.dtb \
- 	kirkwood-goflexnet.dtb \
- 	kirkwood-guruplug-server-plus.dtb \
- 	kirkwood-ib62x0.dtb \
-Index: linux-3.18.27/arch/arm/boot/dts/kirkwood-goflexhome.dts
-===================================================================
---- /dev/null
-+++ linux-3.18.27/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,117 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+	model = "Seagate GoFlex Home";
-+	compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x8000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-+		stdout-path = &uart0;
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pmx_usb_power_enable: pmx-usb-power-enable {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_white: pmx-led-white {
-+				marvell,pins = "mpp40";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_green: pmx-led_green {
-+				marvell,pins = "mpp46";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_orange: pmx-led-orange {
-+				marvell,pins = "mpp47";
-+				marvell,function = "gpio";
-+			};
-+		};
-+		serial@12000 {
-+			status = "ok";
-+		};
-+
-+		sata@80000 {
-+			status = "okay";
-+			nr-ports = <2>;
-+		};
-+
-+	};
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		health {
-+			label = "status:green:health";
-+			gpios = <&gpio1 14 1>;
-+			linux,default-trigger = "default-on";
-+		};
-+		fault {
-+			label = "status:orange:fault";
-+			gpios = <&gpio1 15 1>;
-+		};
-+		misc {
-+			label = "status:white:misc";
-+			gpios = <&gpio1 8 1>;
-+			linux,default-trigger = "ide-disk";
-+		};
-+	};
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_usb_power_enable>;
-+		pinctrl-names = "default";
-+
-+		usb_power: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "USB Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			enable-active-high;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&nand {
-+	chip-delay = <40>;
-+	status = "okay";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0000000 0x100000>;
-+		read-only;
-+	};
-+
-+	partition@100000 {
-+		label = "ubi";
-+		reg = <0x100000 0x0ff00000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+
-+	ethphy0: ethernet-phy@0 {
-+		reg = <0>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};
diff --git a/target/linux/kirkwood/patches-3.18/181-goflexnet.patch b/target/linux/kirkwood/patches-3.18/181-goflexnet.patch
deleted file mode 100644
index fc19e396d5..0000000000
--- a/target/linux/kirkwood/patches-3.18/181-goflexnet.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-Index: linux-4.4.4/arch/arm/boot/dts/kirkwood-goflexnet.dts
-===================================================================
---- linux-4.4.4.orig/arch/arm/boot/dts/kirkwood-goflexnet.dts
-+++ linux-4.4.4/arch/arm/boot/dts/kirkwood-goflexnet.dts
-@@ -158,18 +158,8 @@
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
--	};
--
--	partition@500000 {
--		label = "pogoplug";
--		reg = <0x0500000 0x2000000>;
--	};
--
--	partition@2500000 {
--		label = "root";
--		reg = <0x02500000 0xd800000>;
-+		label = "ubi";
-+		reg = <0x0100000 0x0ff00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-3.18/190-nsa310s.patch b/target/linux/kirkwood/patches-3.18/190-nsa310s.patch
deleted file mode 100644
index fbbb0e6df9..0000000000
--- a/target/linux/kirkwood/patches-3.18/190-nsa310s.patch
+++ /dev/null
@@ -1,300 +0,0 @@
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
-@@ -0,0 +1,287 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+	model = "ZyXEL NSA310S";
-+	compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x10000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+		stdout-path = &uart0;
-+	};
-+
-+	mbus {
-+		pcie-controller {
-+			status = "okay";
-+
-+			pcie@1,0 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pinctrl-names = "default";
-+
-+			pmx_sata0: pmx-sata0 {
-+				marvell,pins;
-+				marvell,function = "sata0";
-+			};
-+			pmx_sata1: pmx-sata1 {
-+				marvell,pins;
-+				marvell,function = "sata1";
-+			};
-+			pmx_usb_power: pmx-usb-power {
-+				marvell,pins = "mpp21";
-+				marvell,function = "gpio";
-+			};
-+			pmx_pwr_off: pmx-pwr-off {
-+				marvell,pins = "mpp27";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_reset: pmx-btn-reset {
-+				marvell,pins = "mpp24";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_copy: pmx-btn-copy {
-+				marvell,pins = "mpp25";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_power: pmx-btn-power {
-+				marvell,pins = "mpp26";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd2_green: pmx-led-hdd2-green {
-+				marvell,pins = "mpp34";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd2_red: pmx-led-hdd2-red {
-+				marvell,pins = "mpp12";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_usb_green: pmx-led-usb-green {
-+				marvell,pins = "mpp15";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_copy_green: pmx-led-copy-green {
-+				marvell,pins = "mpp22";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_copy_red: pmx-led-copy-red {
-+				marvell,pins = "mpp23";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_sys_green: pmx-led-sys-green {
-+				marvell,pins = "mpp28";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_sys_orange: pmx-led-sys-orange {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd1_green: pmx-led-hdd1-green {
-+				marvell,pins = "mpp16";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd1_red: pmx-led-hdd1-red {
-+				marvell,pins = "mpp13";
-+				marvell,function = "gpio";
-+			};
-+			pmx_pwr_sata1: pmx-pwr-sata1 {
-+				marvell,pins = "mpp33";
-+				marvell,function = "gpio";
-+			};
-+		};
-+
-+		serial@12000 {
-+			status = "okay";
-+		};
-+
-+		sata@80000 {
-+			status = "okay";
-+			nr-ports = <2>;
-+		};
-+
-+		rtc@10300 {
-+			status = "disabled";
-+		};
-+
-+		i2c@11000 {
-+			status = "okay";
-+			ht1382: rtc@68 {
-+				compatible = "htk,ht1382";
-+				reg = <0x68>;
-+			};
-+		};
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
-+
-+		usb0_power: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "USB Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			enable-active-high;
-+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		sata1_power: regulator@2 {
-+			compatible = "regulator-fixed";
-+			reg = <2>;
-+			regulator-name = "SATA1 Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			enable-active-high;
-+			gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
-+		pinctrl-names = "default";
-+
-+		button@1 {
-+			label = "Power Button";
-+			linux,code = <KEY_POWER>;
-+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-+		};
-+		button@2 {
-+			label = "Copy Button";
-+			linux,code = <KEY_COPY>;
-+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-+		};
-+		button@3 {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
-+				&pmx_led_usb_green
-+				&pmx_led_sys_green &pmx_led_sys_orange
-+				&pmx_led_copy_green &pmx_led_copy_red
-+				&pmx_led_hdd1_green &pmx_led_hdd1_red>;
-+		pinctrl-names = "default";
-+
-+		green-sys {
-+			label = "nsa310s:green:sys";
-+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "timer";
-+		};
-+		orange-sys {
-+			label = "nsa310s:orange:sys";
-+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-hdd1 {
-+			label = "nsa310s:green:hdd1";
-+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-hdd1 {
-+			label = "nsa310s:red:hdd1";
-+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-hdd2 {
-+			label = "nsa310s:green:hdd2";
-+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-hdd2 {
-+			label = "nsa310s:red:hdd2";
-+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-usb {
-+			label = "nsa310s:green:usb";
-+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-copy {
-+			label = "nsa310s:green:copy";
-+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "ide-disk";
-+		};
-+		red-copy {
-+			label = "nsa310s:red:copy";
-+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	gpio_poweroff {
-+		compatible = "gpio-poweroff";
-+		pinctrl-0 = <&pmx_pwr_off>;
-+		pinctrl-names = "default";
-+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	chip-delay = <35>;
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0000000 0xe0000>;
-+	};
-+
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
-+	};
-+
-+	partition@100000 {
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
-+	};
-+
-+	partition@200000 {
-+		label = "root";
-+		reg = <0x200000 0x7e00000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+	ethphy0: ethernet-phy@1 {
-+		compatible = "marvell,88e1318s";
-+		reg = <1>;
-+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
-+							<0x1 0x10 0x0 0x1017>,
-+							<0x1 0x11 0x0 0x4408>,
-+							<0x1 0x16 0x0 0x0>,
-+							<0x1 0x4 0x0 0x1e1>,
-+							<0x1 0x9 0x0 0x300>,
-+							<0x1 0x10 0x0 0x3860>,
-+							<0x1 0x0 0x0 0x9140>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -145,6 +145,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- 	kirkwood-ns2mini.dtb \
- 	kirkwood-nsa310.dtb \
- 	kirkwood-nsa310a.dtb \
-+	kirkwood-nsa310s.dtb \
- 	kirkwood-openblocks_a6.dtb \
- 	kirkwood-openblocks_a7.dtb \
- 	kirkwood-openrd-base.dtb \
diff --git a/target/linux/kirkwood/patches-3.18/200-disable-tso.patch b/target/linux/kirkwood/patches-3.18/200-disable-tso.patch
deleted file mode 100644
index 4e8126e8c2..0000000000
--- a/target/linux/kirkwood/patches-3.18/200-disable-tso.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Subject: [PATCH] net: mv643xx_eth: Make TSO disabled by default
-
-Data corruption has been observed to be produced by TSO. For instance,
-accessing files on a NFS-server with TSO enabled results in different data
-transferred each time.
-
-This has been observed only on Kirkwood platforms, i.e. with the mv643xx_eth
-driver. Same tests on platforms using the mvneta ethernet driver have
-passed without errors.
-
-Make TSO disabled by default for now, until we can found a proper fix
-for the regression.
-
-Fixes: 3ae8f4e0b98 ('net: mv643xx_eth: Implement software TSO')
-Reported-by: Slawomir Gajzner <slawomir.gajzner <at> gmail.com>
-Reported-by: Julien D'Ascenzio <jdascenzio <at> yahoo.fr>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia <at> free-electrons.com>
----
---- a/drivers/net/ethernet/marvell/mv643xx_eth.c
-+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
-@@ -3112,11 +3112,11 @@ static int mv643xx_eth_probe(struct plat
- 	dev->watchdog_timeo = 2 * HZ;
- 	dev->base_addr = 0;
- 
--	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
-+	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
- 	dev->vlan_features = dev->features;
- 
- 	dev->features |= NETIF_F_RXCSUM;
--	dev->hw_features = dev->features;
-+	dev->hw_features = dev->features | NETIF_F_TSO;
- 
- 	dev->priv_flags |= IFF_UNICAST_FLT;
- 	dev->gso_max_segs = MV643XX_MAX_TSO_SEGS;