aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood/patches-3.18/180-goflexhome.patch
diff options
context:
space:
mode:
authorLuka Perkov <luka@openwrt.org>2016-03-14 17:12:08 +0000
committerLuka Perkov <luka@openwrt.org>2016-03-14 17:12:08 +0000
commitb5bcd4cf36b7535f6f00c0efc5f7732730fdf593 (patch)
treebbd2a236d00e1568d13976c35dd90ce0176fba6a /target/linux/kirkwood/patches-3.18/180-goflexhome.patch
parent3ffb5cec14863a2bcfc4da903a1a6bbb78409097 (diff)
downloadupstream-b5bcd4cf36b7535f6f00c0efc5f7732730fdf593.tar.gz
upstream-b5bcd4cf36b7535f6f00c0efc5f7732730fdf593.tar.bz2
upstream-b5bcd4cf36b7535f6f00c0efc5f7732730fdf593.zip
kirkwood: drop 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 49021
Diffstat (limited to 'target/linux/kirkwood/patches-3.18/180-goflexhome.patch')
-rw-r--r--target/linux/kirkwood/patches-3.18/180-goflexhome.patch134
1 files changed, 0 insertions, 134 deletions
diff --git a/target/linux/kirkwood/patches-3.18/180-goflexhome.patch b/target/linux/kirkwood/patches-3.18/180-goflexhome.patch
deleted file mode 100644
index 95e67b91e2..0000000000
--- a/target/linux/kirkwood/patches-3.18/180-goflexhome.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-Index: linux-3.18.27/arch/arm/boot/dts/Makefile
-===================================================================
---- linux-3.18.27.orig/arch/arm/boot/dts/Makefile
-+++ linux-3.18.27/arch/arm/boot/dts/Makefile
-@@ -120,6 +120,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
- kirkwood-ds411.dtb \
- kirkwood-ds411j.dtb \
- kirkwood-ds411slim.dtb \
-+ kirkwood-goflexhome.dtb \
- kirkwood-goflexnet.dtb \
- kirkwood-guruplug-server-plus.dtb \
- kirkwood-ib62x0.dtb \
-Index: linux-3.18.27/arch/arm/boot/dts/kirkwood-goflexhome.dts
-===================================================================
---- /dev/null
-+++ linux-3.18.27/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,117 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+ model = "Seagate GoFlex Home";
-+ compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x8000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-+ stdout-path = &uart0;
-+ };
-+
-+ ocp@f1000000 {
-+ pinctrl: pin-controller@10000 {
-+ pmx_usb_power_enable: pmx-usb-power-enable {
-+ marvell,pins = "mpp29";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_white: pmx-led-white {
-+ marvell,pins = "mpp40";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_green: pmx-led_green {
-+ marvell,pins = "mpp46";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_orange: pmx-led-orange {
-+ marvell,pins = "mpp47";
-+ marvell,function = "gpio";
-+ };
-+ };
-+ serial@12000 {
-+ status = "ok";
-+ };
-+
-+ sata@80000 {
-+ status = "okay";
-+ nr-ports = <2>;
-+ };
-+
-+ };
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+
-+ health {
-+ label = "status:green:health";
-+ gpios = <&gpio1 14 1>;
-+ linux,default-trigger = "default-on";
-+ };
-+ fault {
-+ label = "status:orange:fault";
-+ gpios = <&gpio1 15 1>;
-+ };
-+ misc {
-+ label = "status:white:misc";
-+ gpios = <&gpio1 8 1>;
-+ linux,default-trigger = "ide-disk";
-+ };
-+ };
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = <&pmx_usb_power_enable>;
-+ pinctrl-names = "default";
-+
-+ usb_power: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "USB Power";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ enable-active-high;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&nand {
-+ chip-delay = <40>;
-+ status = "okay";
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0000000 0x100000>;
-+ read-only;
-+ };
-+
-+ partition@100000 {
-+ label = "ubi";
-+ reg = <0x100000 0x0ff00000>;
-+ };
-+};
-+
-+&mdio {
-+ status = "okay";
-+
-+ ethphy0: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+};
-+
-+&eth0 {
-+ status = "okay";
-+ ethernet0-port@0 {
-+ phy-handle = <&ethphy0>;
-+ };
-+};