aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood/base-files/sbin
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2021-08-16 17:42:56 +0200
committerSungbo Eo <mans0n@gorani.run>2021-12-04 09:39:11 +0900
commit3843c641d83b621e07f03753a5617ab27e55e262 (patch)
treea9eddab944632ce972c08cde020786e22d5dd22c /target/linux/kirkwood/base-files/sbin
parente22c91e144d63ccbd7b76b370a53652c48db1d6f (diff)
downloadupstream-3843c641d83b621e07f03753a5617ab27e55e262.tar.gz
upstream-3843c641d83b621e07f03753a5617ab27e55e262.tar.bz2
upstream-3843c641d83b621e07f03753a5617ab27e55e262.zip
kirkwood: add support for Ctera C200 V1 NAS
2-Bay NAS - maximum two 3.5" Harddisks Hardware: - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz - Ram: 512MB (4x Nanya NT5TU128M8GE-AC) - NAND Flash: 256MB (Samsung 216 K9F2G08U0C) - Lan: 1x GBE (Marvell 88E1116R-NNC1) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 2.0 port - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Known issues: - Buzzer is unused due lack of proper driver Installation: - Apply factory initramfs image via stock web-gui. - Do sysupgrade to make installation complete. Back to stock: - OpenWrt rootfs partition use unused space after stock firmware. - Full revert is possible. - Login via ssh and run: ctera_c200-v1_back_to_factory Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run> [apply sorting to device recipe] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/kirkwood/base-files/sbin')
-rwxr-xr-xtarget/linux/kirkwood/base-files/sbin/ctera_c200-v1_back_to_factory28
1 files changed, 28 insertions, 0 deletions
diff --git a/target/linux/kirkwood/base-files/sbin/ctera_c200-v1_back_to_factory b/target/linux/kirkwood/base-files/sbin/ctera_c200-v1_back_to_factory
new file mode 100755
index 0000000000..bb922d4d75
--- /dev/null
+++ b/target/linux/kirkwood/base-files/sbin/ctera_c200-v1_back_to_factory
@@ -0,0 +1,28 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+case $(board_name) in
+ctera,c200-v1)
+ part=$(find_mtd_part "active_bank")
+
+ if [ -n "$part" ]; then
+ active_bank="$(strings $part | grep bank)"
+
+ if [ $active_bank = "bank1" ]; then
+ echo "bank2" > /tmp/change_bank
+ else
+ echo "bank1" > /tmp/change_bank
+ fi
+
+ mtd write /tmp/change_bank active_bank
+ reboot
+ else
+ echo "active_bank partition missed!"
+ return 1
+ fi
+ ;;
+*)
+ echo "Unsupported hardware."
+ ;;
+esac