aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood/base-files/etc
diff options
context:
space:
mode:
authorMakoto Takeuchi <mak0@lxsys.co.uk>2017-05-24 16:37:24 +0100
committerMathias Kresin <dev@kresin.me>2017-06-12 21:07:31 +0200
commitca27b3d370353ff57719718a1964c6b4f10b11a4 (patch)
treef5b40d8d2a2f5b3745fb55f20b27f086b3b95dab /target/linux/kirkwood/base-files/etc
parentc2f052acaeb480e89d3ce39c47f49ad16b3464ac (diff)
downloadupstream-ca27b3d370353ff57719718a1964c6b4f10b11a4.tar.gz
upstream-ca27b3d370353ff57719718a1964c6b4f10b11a4.tar.bz2
upstream-ca27b3d370353ff57719718a1964c6b4f10b11a4.zip
kirkwood: add support for Cisco ON100
The Cisco ON100 device is a Kirkwood based router: SoC: Marvell 88F6282 1600Mhz SDRAM memory: 512MB DDR3 1333Mhz Gigabit ethernet: 2x Marvell 88E1310 (over RGMII) Flash memory: 512MB 2 bi-colour status LEDs (green/red) 1 Reset button 1 USB 2.0 port (on back) 1 SDIO slot (on back) This commit adds a target profile of "Cisco Systems ON100" under the target system "Marvell Kirkwood". Flashing can be performed over tftp, once "dhcp" has been issued: tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin nand erase 0x0c0000 ${filesize} nand write ${loadaddr} 0x0c0000 ${filesize} Once flashed, set environment variables to boot: setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs \; bootm saveenv Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
Diffstat (limited to 'target/linux/kirkwood/base-files/etc')
-rwxr-xr-xtarget/linux/kirkwood/base-files/etc/board.d/02_network3
-rwxr-xr-xtarget/linux/kirkwood/base-files/etc/diag.sh3
2 files changed, 6 insertions, 0 deletions
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network
index 35d735f9db..19f0292b29 100755
--- a/target/linux/kirkwood/base-files/etc/board.d/02_network
+++ b/target/linux/kirkwood/base-files/etc/board.d/02_network
@@ -35,6 +35,9 @@ case "$board" in
ucidef_set_interface_lan "eth0" "dhcp"
ucidef_set_interface_macaddr "lan" $( mtd_get_mac_ascii uboot_env ethaddr )
;;
+"on100")
+ ucidef_set_interface_lan "eth0 eth1"
+ ;;
*)
ucidef_set_interface_lan "eth0"
;;
diff --git a/target/linux/kirkwood/base-files/etc/diag.sh b/target/linux/kirkwood/base-files/etc/diag.sh
index 1c4632d613..64650850d6 100755
--- a/target/linux/kirkwood/base-files/etc/diag.sh
+++ b/target/linux/kirkwood/base-files/etc/diag.sh
@@ -23,6 +23,9 @@ get_status_led() {
nsa310b)
status_led="nsa310:green:sys"
;;
+ on100)
+ status_led="on100:green:health"
+ ;;
esac
}