diff options
| author | ZengFei Zhang <zhangzengfei@kunteng.org> | 2017-02-22 20:47:22 +0800 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-02-28 23:46:02 +0100 |
| commit | edae3479e64e93275dce4a928ea70279282eef9d (patch) | |
| tree | 3a9e78e098b52d4e6e66c5edb636e6b8a0390f6e /target/linux/kirkwood/base-files/etc/board.d | |
| parent | 2677b66f9ba31dccbf3c815776fb6125fd9bfed3 (diff) | |
| download | upstream-edae3479e64e93275dce4a928ea70279282eef9d.tar.gz upstream-edae3479e64e93275dce4a928ea70279282eef9d.tar.bz2 upstream-edae3479e64e93275dce4a928ea70279282eef9d.zip | |
ramips: add support for HiWiFi HC5962
This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com
Short specification:
- MT7621AT + MT7612EN + 7603EN
- 256MB DDR3 RAM
- 128MB NAND flash
- 1+3 x 1000M Ethernet
- 1x USB 2.0 port. 1x USB 3.0 port.
- reset button
- UART pad on PCB (JP3: TX, RX, GND, 3.3V)
Flash instruction:
1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin
2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/
3, use the following commands:
$ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware
$ mtd erase firmware_backup && reboot
After reboot you should be able to login as root via SSH on 192.168.1.1
Signed-off-by: ZengFei Zhang <zhangzengfei@kunteng.org>
Diffstat (limited to 'target/linux/kirkwood/base-files/etc/board.d')
0 files changed, 0 insertions, 0 deletions