diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2022-01-01 21:00:36 +0900 |
|---|---|---|
| committer | Sungbo Eo <mans0n@gorani.run> | 2022-01-29 23:50:28 +0900 |
| commit | 957f9adeb1f8ec5de8d73e183dec267dbc6dc8bb (patch) | |
| tree | 44238e23a15f6b0f89f303b1d7b00def6b8f5261 /target/linux/kirkwood/base-files/etc/board.d/02_network | |
| parent | 0c568d044fac166e803ab6a9bcd2f18d31309f9f (diff) | |
| download | upstream-957f9adeb1f8ec5de8d73e183dec267dbc6dc8bb.tar.gz upstream-957f9adeb1f8ec5de8d73e183dec267dbc6dc8bb.tar.bz2 upstream-957f9adeb1f8ec5de8d73e183dec267dbc6dc8bb.zip | |
kirkwood: add support for ipTIME NAS1
ipTIME NAS1 is a 1-bay NAS, based on Marvell Kirkwood SoC.
Specifications:
* SoC: 88F6281
* RAM: 256 MiB
* Flash: SPI NOR 16 MiB
* SATA: 1x 3Gb/s
* Ethernet: 1x 1GbE
* USB: 1x 2.0
* Fan: 2 speed level
* UART: JP1 (115200 8N1)
* Pinout: [3V3] (TXD) (RXD) (GND)
Notes:
* There are several variants of the model name: "NAS-I", "NASI", "NAS1".
Here "NAS1" is adopted for consistent naming scheme.
* The reset button is also a USB copy button in stock FW,
but in this patch the former is the only default behavior.
Installation via web interface:
1. Flash sysupgrade image through the stock web interface.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/kirkwood/base-files/etc/board.d/02_network')
| -rw-r--r-- | target/linux/kirkwood/base-files/etc/board.d/02_network | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network index 773730e642..df38694f40 100644 --- a/target/linux/kirkwood/base-files/etc/board.d/02_network +++ b/target/linux/kirkwood/base-files/etc/board.d/02_network @@ -22,6 +22,7 @@ kirkwood_setup_interfaces() globalscale,sheevaplug|\ iom,iconnect-1.1|\ iom,ix2-200|\ + iptime,nas1|\ netgear,readynas-duo-v2|\ raidsonic,ib-nas62x0|\ seagate,blackarmor-nas220|\ @@ -55,6 +56,10 @@ kirkwood_setup_macs() local label_mac="" case "$board" in + iptime,nas1) + lan_mac=$(mtd_get_mac_binary u-boot 0x3ffa8) + label_mac=$lan_mac + ;; linksys,e4200-v2|\ linksys,ea3500|\ linksys,ea4500) |