diff options
author | Alberto Bursi <alberto.bursi@outlook.it> | 2017-02-06 11:40:52 +0100 |
---|---|---|
committer | Felix Fietkau <nbd@nbd.name> | 2017-02-11 21:16:28 +0100 |
commit | 4383c13aee8963ee93ca1950e7f0ea5a35309ab4 (patch) | |
tree | 08429fcda96d5beb22be21f7fa3380029155b0b7 /target/linux/kirkwood/base-files/etc/board.d/02_network | |
parent | add1dd00813ccccfe5f1ee8e6bf04db7822b9fd5 (diff) | |
download | upstream-4383c13aee8963ee93ca1950e7f0ea5a35309ab4.tar.gz upstream-4383c13aee8963ee93ca1950e7f0ea5a35309ab4.tar.bz2 upstream-4383c13aee8963ee93ca1950e7f0ea5a35309ab4.zip |
kirkwood: add ZyXEL NSA325 device
This patch add ZyXEL NSA325 2-Bay Media Server
The ZyXEL NSA325 device is a Kirkwood based NAS:
- SoC: Marvell 88F6702 1600Mhz
- SDRAM memory: 512MB DDR2 400Mhz
- Gigabit ethernet: Marvell Alaska
- Flash memory: 128MB
- 1 Power button
- 1 Power LED (blue)
- 5 Status LED (green/red)
- 1 Copy/Sync button
- 1 Reset button
- 2 SATA II ports (internal)
- 2 USB 2.0 ports (back)
- 1 USB 3.0 port (front)
- Fan (fixed speed)
- hardware watchdog in a mcu
Basically a bigger, more powerful version of NSA310,
installation is the same as they share the same flash layout.
A notable difference is that there is a hardware watchdog
in a mcu on the board, which is disabled by default in the LEDE u-boot.
The watchdog is also disabled with a GPIO activation through
raw register change when kwbooting or it would reset the board before
the new uboot was transferred.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
Diffstat (limited to 'target/linux/kirkwood/base-files/etc/board.d/02_network')
-rwxr-xr-x | target/linux/kirkwood/base-files/etc/board.d/02_network | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network index b5406b0e37..b82086ec3e 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/02_network +++ b/target/linux/kirkwood/base-files/etc/board.d/02_network @@ -30,7 +30,7 @@ case "$board" in ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" "6@eth1" ;; -"nsa310b") +"nsa310b"|"nsa325") ucidef_set_interface_lan "eth0" "dhcp" ucidef_set_interface_macaddr "lan" $( mtd_get_mac_ascii uboot_env ethaddr ) ;; |