[ixp4xx] add switch support to the npe driver

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10966 3c298f89-4303-0410-b956-a3cf2f4a3e73

2 files changed, 296 insertions, 0 deletions

diff --git a/target/linux/ixp4xx/patches-2.6.24/202-npe_driver_switch_support.patch b/target/linux/ixp4xx/patches-2.6.24/202-npe_driver_switch_support.patch
new file mode 100644
index 0000000000..0163829b08
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/202-npe_driver_switch_support.patch
@@ -0,0 +1,252 @@
+Index: linux-2.6.24.2/drivers/net/arm/ixp4xx_eth.c
+===================================================================
+--- linux-2.6.24.2.orig/drivers/net/arm/ixp4xx_eth.c
++++ linux-2.6.24.2/drivers/net/arm/ixp4xx_eth.c
+@@ -165,14 +165,15 @@ struct port {
+ 	struct net_device *netdev;
+ 	struct napi_struct napi;
+ 	struct net_device_stats stat;
+-	struct mii_if_info mii;
++	struct mii_if_info mii[IXP4XX_ETH_PHY_MAX_ADDR];
+ 	struct delayed_work mdio_thread;
+ 	struct eth_plat_info *plat;
+ 	buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
+ 	struct desc *desc_tab;	/* coherent */
+ 	u32 desc_tab_phys;
+ 	int id;			/* logical port ID */
+-	u16 mii_bmcr;
++	u16 mii_bmcr[IXP4XX_ETH_PHY_MAX_ADDR];
++	int phy_count;
+ };
+ 
+ /* NPE message structure */
+@@ -316,13 +317,14 @@ static void mdio_write(struct net_device
+ 	spin_unlock_irqrestore(&mdio_lock, flags);
+ }
+ 
+-static void phy_reset(struct net_device *dev, int phy_id)
++static void phy_reset(struct net_device *dev, int idx)
+ {
+ 	struct port *port = netdev_priv(dev);
++	int phy_id = port->mii[idx].phy_id;
+ 	int cycles = 0;
+ 
+-	mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
+-	
++	mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr[idx] | BMCR_RESET);
++
+ 	while (cycles < MAX_MII_RESET_RETRIES) {
+ 		if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
+ #if DEBUG_MDIO
+@@ -335,12 +337,12 @@ static void phy_reset(struct net_device 
+ 		cycles++;
+ 	}
+ 
+-	printk(KERN_ERR "%s: MII reset failed\n", dev->name);
++	printk(KERN_ERR "%s: MII reset failed on PHY%2d\n", dev->name, phy_id);
+ }
+ 
+-static void eth_set_duplex(struct port *port)
++static void eth_set_duplex(struct port *port, int full_duplex)
+ {
+-	if (port->mii.full_duplex)
++	if (full_duplex)
+ 		__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
+ 			     &port->regs->tx_control[0]);
+ 	else
+@@ -348,7 +350,7 @@ static void eth_set_duplex(struct port *
+ 			     &port->regs->tx_control[0]);
+ }
+ 
+-
++#if 0
+ static void phy_check_media(struct port *port, int init)
+ {
+ 	if (mii_check_media(&port->mii, 1, init))
+@@ -367,7 +369,63 @@ static void phy_check_media(struct port 
+ 		}
+ 	}
+ }
++#else
++static void phy_update_link(struct net_device *dev, int link)
++{
++	int prev_link = netif_carrier_ok(dev);
++
++	if (!prev_link && link) {
++		printk(KERN_INFO "%s: link up\n", dev->name);
++		netif_carrier_on(dev);
++	} else if (prev_link && !link) {
++		printk(KERN_INFO "%s: link down\n", dev->name);
++		netif_carrier_off(dev);
++	}
++}
++
++static void phy_check_media(struct port *port, int init)
++{
++	struct net_device *dev = port->netdev;
++
++	if (port->phy_count == 1) {
++		struct mii_if_info *mii = &port->mii[0];
++
++		if (mii_check_media(mii, 1, init))
++			eth_set_duplex(port, mii->full_duplex);
++
++		if (mii->force_media) /* mii_check_media() doesn't work */
++			phy_update_link(dev, mii_link_ok(mii));
++	} else {
++		int cur_link = 0;
++		int i;
++
++		if (init)
++			eth_set_duplex(port, 1);
++
++		for (i = 0; i < port->phy_count; i++)
++			cur_link |= mii_link_ok(&port->mii[i]);
++
++		phy_update_link(dev, cur_link);
++	}
++}
++#endif
+ 
++static void phy_power_down(struct net_device *dev, int idx)
++{
++	struct port *port = netdev_priv(dev);
++	int phy_id = port->mii[idx].phy_id;
++
++	port->mii_bmcr[idx] = mdio_read(dev, phy_id, MII_BMCR) &
++						~(BMCR_RESET | BMCR_PDOWN);
++	mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr[idx] | BMCR_PDOWN);
++}
++
++static void phy_power_up(struct net_device *dev, int idx)
++{
++	struct port *port = netdev_priv(dev);
++
++	mdio_write(dev, port->mii[idx].phy_id, MII_BMCR, port->mii_bmcr[idx]);
++}
+ 
+ static void mdio_thread(struct work_struct *work)
+ {
+@@ -790,9 +848,12 @@ static int eth_ioctl(struct net_device *
+ 
+ 	if (!netif_running(dev))
+ 		return -EINVAL;
+-	err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
++	if (port->phy_count != 1)
++		return -EOPNOTSUPP;
++
++	err = generic_mii_ioctl(&port->mii[0], if_mii(req), cmd, &duplex_chg);
+ 	if (duplex_chg)
+-		eth_set_duplex(port);
++		eth_set_duplex(port, port->mii[0].full_duplex);
+ 	return err;
+ }
+ 
+@@ -944,7 +1005,8 @@ static int eth_open(struct net_device *d
+ 		}
+ 	}
+ 
+-	mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
++	for (i = 0; i < port->phy_count; i++)
++		phy_power_up(dev, i);
+ 
+ 	memset(&msg, 0, sizeof(msg));
+ 	msg.cmd = NPE_VLAN_SETRXQOSENTRY;
+@@ -1103,10 +1165,8 @@ static int eth_close(struct net_device *
+ 		printk(KERN_CRIT "%s: unable to disable loopback\n",
+ 		       dev->name);
+ 
+-	port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
+-		~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
+-	mdio_write(dev, port->plat->phy, MII_BMCR,
+-		   port->mii_bmcr | BMCR_PDOWN);
++	for (i = 0; i < port->phy_count; i++)
++		phy_power_down(dev, i);
+ 
+ 	if (!ports_open)
+ 		qmgr_disable_irq(TXDONE_QUEUE);
+@@ -1117,6 +1177,42 @@ static int eth_close(struct net_device *
+ 	return 0;
+ }
+ 
++static void eth_add_phy(struct net_device *dev, int phy_id)
++{
++	struct port *port = netdev_priv(dev);
++	int i;
++
++	i = port->phy_count++;
++
++	port->mii[i].dev = dev;
++	port->mii[i].mdio_read = mdio_read;
++	port->mii[i].mdio_write = mdio_write;
++	port->mii[i].phy_id = phy_id;
++	port->mii[i].phy_id_mask = 0x1F;
++	port->mii[i].reg_num_mask = 0x1F;
++
++	printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, phy_id,
++	       npe_name(port->npe));
++
++	phy_reset(dev, i);
++	phy_power_down(dev, i);
++}
++
++static void eth_init_mii(struct net_device *dev)
++{
++	struct port *port = netdev_priv(dev);
++
++	if (port->plat->phy < IXP4XX_ETH_PHY_MAX_ADDR) {
++		eth_add_phy(dev, port->plat->phy);
++	} else {
++		int i;
++		for (i = 0; i < IXP4XX_ETH_PHY_MAX_ADDR; i++)
++			if (port->plat->phy_mask & (1U << i))
++				eth_add_phy(dev, i);
++	}
++
++}
++
+ static int __devinit eth_init_one(struct platform_device *pdev)
+ {
+ 	struct port *port;
+@@ -1189,20 +1285,7 @@ static int __devinit eth_init_one(struct
+ 	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
+ 	udelay(50);
+ 
+-	port->mii.dev = dev;
+-	port->mii.mdio_read = mdio_read;
+-	port->mii.mdio_write = mdio_write;
+-	port->mii.phy_id = plat->phy;
+-	port->mii.phy_id_mask = 0x1F;
+-	port->mii.reg_num_mask = 0x1F;
+-
+-	printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
+-	       npe_name(port->npe));
+-
+-	phy_reset(dev, plat->phy);
+-	port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
+-		~(BMCR_RESET | BMCR_PDOWN);
+-	mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
++	eth_init_mii(dev);
+ 
+ 	INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
+ 	return 0;
+Index: linux-2.6.24.2/include/asm-arm/arch-ixp4xx/platform.h
+===================================================================
+--- linux-2.6.24.2.orig/include/asm-arm/arch-ixp4xx/platform.h
++++ linux-2.6.24.2/include/asm-arm/arch-ixp4xx/platform.h
+@@ -106,12 +106,15 @@ struct sys_timer;
+ #define IXP4XX_ETH_NPEB		0x10
+ #define IXP4XX_ETH_NPEC		0x20
+ 
++#define IXP4XX_ETH_PHY_MAX_ADDR	32
++
+ /* Information about built-in Ethernet MAC interfaces */
+ struct eth_plat_info {
+ 	u8 phy;		/* MII PHY ID, 0 - 31 */
+ 	u8 rxq;		/* configurable, currently 0 - 31 only */
+ 	u8 txreadyq;
+ 	u8 hwaddr[6];
++	u32 phy_mask;
+ };
+ 
+ /* Information about built-in HSS (synchronous serial) interfaces */
diff --git a/target/linux/ixp4xx/patches-2.6.24/203-npe_driver_phy_reset_autoneg.patch b/target/linux/ixp4xx/patches-2.6.24/203-npe_driver_phy_reset_autoneg.patch
new file mode 100644
index 0000000000..6e1056e55d
--- /dev/null
+++ b/target/linux/ixp4xx/patches-2.6.24/203-npe_driver_phy_reset_autoneg.patch
@@ -0,0 +1,44 @@
+Index: linux-2.6.24.2/drivers/net/arm/ixp4xx_eth.c
+===================================================================
+--- linux-2.6.24.2.orig/drivers/net/arm/ixp4xx_eth.c
++++ linux-2.6.24.2/drivers/net/arm/ixp4xx_eth.c
+@@ -322,8 +322,12 @@ static void phy_reset(struct net_device 
+ 	struct port *port = netdev_priv(dev);
+ 	int phy_id = port->mii[idx].phy_id;
+ 	int cycles = 0;
++	u16 bmcr;
+ 
+-	mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr[idx] | BMCR_RESET);
++	/* reset the PHY */
++	bmcr = mdio_read(dev, phy_id, MII_BMCR);
++	bmcr |= BMCR_ANENABLE;
++	mdio_write(dev, phy_id, MII_BMCR, bmcr | BMCR_RESET);
+ 
+ 	while (cycles < MAX_MII_RESET_RETRIES) {
+ 		if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
+@@ -331,13 +335,23 @@ static void phy_reset(struct net_device 
+ 			printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
+ 			       dev->name, cycles);
+ #endif
+-			return;
++			break;
+ 		}
+ 		udelay(1);
+ 		cycles++;
+ 	}
+ 
+-	printk(KERN_ERR "%s: MII reset failed on PHY%2d\n", dev->name, phy_id);
++	if (cycles == MAX_MII_RESET_RETRIES) {
++		printk(KERN_ERR "%s: MII reset failed on PHY%2d\n", dev->name,
++								phy_id);
++		return;
++	}
++
++	/* restart auto negotiation */
++	bmcr = mdio_read(dev, phy_id, MII_BMCR);
++	bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
++	mdio_write(dev, phy_id, MII_BMCR, bmcr);
++
+ }
+ 
+ static void eth_set_duplex(struct port *port, int full_duplex)