diff options
author | Felix Fietkau <nbd@openwrt.org> | 2007-09-06 16:27:37 +0000 |
---|---|---|
committer | Felix Fietkau <nbd@openwrt.org> | 2007-09-06 16:27:37 +0000 |
commit | 92558d67a463bfbb351d30e28648de03b635f024 (patch) | |
tree | a5d41b991a151e72663527a96fbc6c494565d65c /target/linux/ixp4xx-2.6/patches | |
parent | e1dbce411cd2a3a067f387cee011cd889486a07d (diff) | |
download | upstream-92558d67a463bfbb351d30e28648de03b635f024.tar.gz upstream-92558d67a463bfbb351d30e28648de03b635f024.tar.bz2 upstream-92558d67a463bfbb351d30e28648de03b635f024.zip |
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ixp4xx-2.6/patches')
38 files changed, 0 insertions, 10107 deletions
diff --git a/target/linux/ixp4xx-2.6/patches/050-dsmg600_upstream_support.patch b/target/linux/ixp4xx-2.6/patches/050-dsmg600_upstream_support.patch deleted file mode 100644 index b214ef2b5f..0000000000 --- a/target/linux/ixp4xx-2.6/patches/050-dsmg600_upstream_support.patch +++ /dev/null @@ -1,551 +0,0 @@ -This patch adds support for the D-Link DSM-G600 Rev A. -This is an ARM XScale IXP4xx system relatively similar to -the NSLU2 and NAS-100D already supported by mainline. An -important difference is Gigabit Ethernet support using -the Via Velocity chipset. - -This patch is the combined work of Michael Westerhof and -Alessandro Zummo, with contributions from Michael-Luke -Jones. This version addresses review comments from rmk -and Deepak Saxena. - -Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> -Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> -Signed-off-by: Michael Westerhof <mwester@dls.net> - ---- - arch/arm/mach-ixp4xx/Kconfig | 9 + - arch/arm/mach-ixp4xx/Makefile | 2 - arch/arm/mach-ixp4xx/dsmg600-pci.c | 74 +++++++++++++ - arch/arm/mach-ixp4xx/dsmg600-power.c | 130 ++++++++++++++++++++++++ - arch/arm/mach-ixp4xx/dsmg600-setup.c | 175 +++++++++++++++++++++++++++++++++ - include/asm-arm/arch-ixp4xx/dsmg600.h | 57 ++++++++++ - include/asm-arm/arch-ixp4xx/hardware.h | 1 - include/asm-arm/arch-ixp4xx/irqs.h | 10 + - 8 files changed, 458 insertions(+) - -Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Kconfig -=================================================================== ---- linux-2.6.21.1-armeb.orig/arch/arm/mach-ixp4xx/Kconfig -+++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Kconfig -@@ -89,6 +89,15 @@ - NAS 100d device. For more information on this platform, - see http://www.nslu2-linux.org/wiki/NAS100d/HomePage - -+config MACH_DSMG600 -+ bool -+ prompt "D-Link DSM-G600 RevA" -+ select PCI -+ help -+ Say 'Y' here if you want your kernel to support D-Link's -+ DSM-G600 RevA device. For more information on this platform, -+ see http://www.nslu2-linux.org/wiki/DSMG600/HomePage -+ - # - # Avila and IXDP share the same source for now. Will change in future - # -Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Makefile -=================================================================== ---- linux-2.6.21.1-armeb.orig/arch/arm/mach-ixp4xx/Makefile -+++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/Makefile -@@ -12,6 +12,7 @@ - obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o - obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o - obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o -+obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o - - obj-y += common.o - -@@ -22,5 +23,6 @@ - obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o - obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o - obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o -+obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o - - obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o -Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-pci.c -=================================================================== ---- /dev/null -+++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-pci.c -@@ -0,0 +1,74 @@ -+/* -+ * DSM-G600 board-level PCI initialization -+ * -+ * Copyright (C) 2006 Tower Technologies -+ * Author: Alessandro Zummo <a.zummo@towertech.it> -+ * -+ * based on ixdp425-pci.c: -+ * Copyright (C) 2002 Intel Corporation. -+ * Copyright (C) 2003-2004 MontaVista Software, Inc. -+ * -+ * Maintainer: http://www.nslu2-linux.org/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+ -+#include <asm/mach/pci.h> -+#include <asm/mach-types.h> -+ -+void __init dsmg600_pci_preinit(void) -+{ -+ set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW); -+ set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW); -+ set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW); -+ set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW); -+ set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW); -+ set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW); -+ -+ ixp4xx_pci_preinit(); -+} -+ -+static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] = -+ { -+ { IRQ_DSMG600_PCI_INTE, -1, -1 }, -+ { IRQ_DSMG600_PCI_INTA, -1, -1 }, -+ { IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD }, -+ { IRQ_DSMG600_PCI_INTF, -1, -1 }, -+ }; -+ -+ int irq = -1; -+ -+ if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV && -+ pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES) -+ irq = pci_irq_table[slot-1][pin-1]; -+ -+ return irq; -+} -+ -+struct hw_pci __initdata dsmg600_pci = { -+ .nr_controllers = 1, -+ .preinit = dsmg600_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = dsmg600_map_irq, -+}; -+ -+int __init dsmg600_pci_init(void) -+{ -+ if (machine_is_dsmg600()) -+ pci_common_init(&dsmg600_pci); -+ -+ return 0; -+} -+ -+subsys_initcall(dsmg600_pci_init); -Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c -=================================================================== ---- /dev/null -+++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c -@@ -0,0 +1,130 @@ -+/* -+ * arch/arm/mach-ixp4xx/dsmg600-power.c -+ * -+ * DSM-G600 Power/Reset driver -+ * Author: Michael Westerhof <mwester@dls.net> -+ * -+ * Based on nslu2-power.c -+ * Copyright (C) 2005 Tower Technologies -+ * Author: Alessandro Zummo <a.zummo@towertech.it> -+ * -+ * which was based on nslu2-io.c -+ * Copyright (C) 2004 Karen Spearel -+ * -+ * Maintainers: http://www.nslu2-linux.org/ -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/module.h> -+#include <linux/reboot.h> -+#include <linux/interrupt.h> -+#include <linux/irq.h> -+#include <linux/jiffies.h> -+#include <linux/timer.h> -+ -+#include <asm/mach-types.h> -+ -+extern void ctrl_alt_del(void); -+ -+/* This is used to make sure the power-button pusher is serious. The button -+ * must be held until the value of this counter reaches zero. -+ */ -+static volatile int power_button_countdown; -+ -+/* Must hold the button down for at least this many counts to be processed */ -+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */ -+ -+static void dsmg600_power_handler(unsigned long data); -+static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0); -+ -+static void dsmg600_power_handler(unsigned long data) -+{ -+ /* This routine is called twice per second to check the -+ * state of the power button. -+ */ -+ -+ if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) { -+ -+ /* IO Pin is 1 (button pushed) */ -+ if (power_button_countdown > 0) { -+ power_button_countdown--; -+ } -+ -+ } else { -+ -+ /* Done on button release, to allow for auto-power-on mods. */ -+ if (power_button_countdown == 0) { -+ /* Signal init to do the ctrlaltdel action, this will bypass -+ * init if it hasn't started and do a kernel_restart. -+ */ -+ ctrl_alt_del(); -+ -+ /* Change the state of the power LED to "blink" */ -+ gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW); -+ } else { -+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT; -+ } -+ } -+ -+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); -+} -+ -+static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id) -+{ -+ /* This is the paper-clip reset, it shuts the machine down directly. */ -+ machine_power_off(); -+ -+ return IRQ_HANDLED; -+} -+ -+static int __init dsmg600_power_init(void) -+{ -+ if (!(machine_is_dsmg600())) -+ return 0; -+ -+ if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler, -+ IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button", -+ NULL) < 0) { -+ -+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n", -+ DSMG600_RB_IRQ); -+ -+ return -EIO; -+ } -+ -+ /* The power button on the D-Link DSM-G600 is on GPIO 15, but -+ * it cannot handle interrupts on that GPIO line. So we'll -+ * have to poll it with a kernel timer. -+ */ -+ -+ /* Make sure that the power button GPIO is set up as an input */ -+ gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN); -+ -+ /* Set the initial value for the power button IRQ handler */ -+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT; -+ -+ mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500)); -+ -+ return 0; -+} -+ -+static void __exit dsmg600_power_exit(void) -+{ -+ if (!(machine_is_dsmg600())) -+ return; -+ -+ del_timer_sync(&dsmg600_power_timer); -+ -+ free_irq(DSMG600_RB_IRQ, NULL); -+} -+ -+module_init(dsmg600_power_init); -+module_exit(dsmg600_power_exit); -+ -+MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>"); -+MODULE_DESCRIPTION("DSM-G600 Power/Reset driver"); -+MODULE_LICENSE("GPL"); -Index: linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c -=================================================================== ---- /dev/null -+++ linux-2.6.21.1-armeb/arch/arm/mach-ixp4xx/dsmg600-setup.c -@@ -0,0 +1,175 @@ -+/* -+ * DSM-G600 board-setup -+ * -+ * Copyright (C) 2006 Tower Technologies -+ * Author: Alessandro Zummo <a.zummo@towertech.it> -+ * -+ * based ixdp425-setup.c: -+ * Copyright (C) 2003-2004 MontaVista Software, Inc. -+ * -+ * Author: Alessandro Zummo <a.zummo@towertech.it> -+ * Maintainers: http://www.nslu2-linux.org/ -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/serial.h> -+#include <linux/serial_8250.h> -+ -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+static struct flash_platform_data dsmg600_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource dsmg600_flash_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device dsmg600_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev.platform_data = &dsmg600_flash_data, -+ .num_resources = 1, -+ .resource = &dsmg600_flash_resource, -+}; -+ -+static struct ixp4xx_i2c_pins dsmg600_i2c_gpio_pins = { -+ .sda_pin = DSMG600_SDA_PIN, -+ .scl_pin = DSMG600_SCL_PIN, -+}; -+ -+static struct platform_device dsmg600_i2c_controller = { -+ .name = "IXP4XX-I2C", -+ .id = 0, -+ .dev.platform_data = &dsmg600_i2c_gpio_pins, -+}; -+ -+#ifdef CONFIG_LEDS_CLASS -+static struct resource dsmg600_led_resources[] = { -+ { -+ .name = "power", -+ .start = DSMG600_LED_PWR_GPIO, -+ .end = DSMG600_LED_PWR_GPIO, -+ .flags = IXP4XX_GPIO_HIGH, -+ }, -+ { -+ .name = "wlan", -+ .start = DSMG600_LED_WLAN_GPIO, -+ .end = DSMG600_LED_WLAN_GPIO, -+ .flags = IXP4XX_GPIO_LOW, -+ }, -+}; -+ -+static struct platform_device dsmg600_leds = { -+ .name = "IXP4XX-GPIO-LED", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(dsmg600_led_resources), -+ .resource = dsmg600_led_resources, -+}; -+#endif -+ -+static struct resource dsmg600_uart_resources[] = { -+ { -+ .start = IXP4XX_UART1_BASE_PHYS, -+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct plat_serial8250_port dsmg600_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART1_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART1, -+ .flags = UPF_BOOT_AUTOCONF, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { } -+}; -+ -+static struct platform_device dsmg600_uart = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev.platform_data = dsmg600_uart_data, -+ .num_resources = ARRAY_SIZE(dsmg600_uart_resources), -+ .resource = dsmg600_uart_resources, -+}; -+ -+static struct platform_device *dsmg600_devices[] __initdata = { -+ &dsmg600_i2c_controller, -+ &dsmg600_flash, -+}; -+ -+static void dsmg600_power_off(void) -+{ -+ /* enable the pwr cntl gpio */ -+ gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT); -+ -+ /* poweroff */ -+ gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); -+} -+ -+static void __init dsmg600_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ /* Make sure that GPIO14 and GPIO15 are not used as clocks */ -+ *IXP4XX_GPIO_GPCLKR = 0; -+ -+ dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ dsmg600_flash_resource.end = -+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; -+ -+ pm_power_off = dsmg600_power_off; -+ -+ /* The UART is required on the DSM-G600 (Redboot cannot use the -+ * NIC) -- do it here so that it does *not* get removed if -+ * platform_add_devices fails! -+ */ -+ (void)platform_device_register(&dsmg600_uart); -+ -+ platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices)); -+ -+#ifdef CONFIG_LEDS_CLASS -+ /* We don't care whether or not this works. */ -+ (void)platform_device_register(&dsmg600_leds); -+#endif -+} -+ -+static void __init dsmg600_fixup(struct machine_desc *desc, -+ struct tag *tags, char **cmdline, struct meminfo *mi) -+{ -+ /* The xtal on this machine is non-standard. */ -+ ixp4xx_timer_freq = DSMG600_FREQ; -+} -+ -+MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") -+ /* Maintainer: www.nslu2-linux.org */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, -+ .boot_params = 0x00000100, -+ .fixup = dsmg600_fixup, -+ .map_io = ixp4xx_map_io, -+ .init_irq = ixp4xx_init_irq, -+ .timer = &ixp4xx_timer, -+ .init_machine = dsmg600_init, -+MACHINE_END -Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h -=================================================================== ---- /dev/null -+++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h -@@ -0,0 +1,57 @@ -+/* -+ * DSM-G600 platform specific definitions -+ * -+ * Copyright (C) 2006 Tower Technologies -+ * Author: Alessandro Zummo <a.zummo@towertech.it> -+ * -+ * based on ixdp425.h: -+ * Copyright 2004 (C) MontaVista, Software, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#ifndef __ASM_ARCH_HARDWARE_H__ -+#error "Do not include this directly, instead #include <asm/hardware.h>" -+#endif -+ -+#define DSMG600_SDA_PIN 5 -+#define DSMG600_SCL_PIN 4 -+ -+/* -+ * DSMG600 PCI IRQs -+ */ -+#define DSMG600_PCI_MAX_DEV 4 -+#define DSMG600_PCI_IRQ_LINES 3 -+ -+ -+/* PCI controller GPIO to IRQ pin mappings */ -+#define DSMG600_PCI_INTA_PIN 11 -+#define DSMG600_PCI_INTB_PIN 10 -+#define DSMG600_PCI_INTC_PIN 9 -+#define DSMG600_PCI_INTD_PIN 8 -+#define DSMG600_PCI_INTE_PIN 7 -+#define DSMG600_PCI_INTF_PIN 6 -+ -+/* DSM-G600 Timer Setting */ -+#define DSMG600_FREQ 66000000 -+ -+/* Buttons */ -+ -+#define DSMG600_PB_GPIO 15 /* power button */ -+#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO) -+ -+#define DSMG600_RB_GPIO 3 /* reset button */ -+ -+#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3 -+ -+#define DSMG600_PO_GPIO 2 /* power off */ -+ -+/* LEDs */ -+ -+#define DSMG600_LED_PWR_GPIO 0 -+#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO) -+ -+#define DSMG600_LED_WLAN_GPIO 14 -+#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO) -Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/hardware.h -=================================================================== ---- linux-2.6.21.1-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h -+++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/hardware.h -@@ -47,5 +47,6 @@ - #include "prpmc1100.h" - #include "nslu2.h" - #include "nas100d.h" -+#include "dsmg600.h" - - #endif /* _ASM_ARCH_HARDWARE_H */ -Index: linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/irqs.h -=================================================================== ---- linux-2.6.21.1-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h -+++ linux-2.6.21.1-armeb/include/asm-arm/arch-ixp4xx/irqs.h -@@ -118,4 +118,14 @@ - #define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8 - #define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7 - -+/* -+ * D-Link DSM-G600 RevA board IRQs -+ */ -+#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11 -+#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10 -+#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9 -+#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8 -+#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7 -+#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6 -+ - #endif diff --git a/target/linux/ixp4xx-2.6/patches/070-ixp4xx_freq_fixup.patch b/target/linux/ixp4xx-2.6/patches/070-ixp4xx_freq_fixup.patch deleted file mode 100644 index 5b406a7bc7..0000000000 --- a/target/linux/ixp4xx-2.6/patches/070-ixp4xx_freq_fixup.patch +++ /dev/null @@ -1,131 +0,0 @@ -This patch is required as the frequency fixup in nslu2_init does not -run sufficiently early in the boot sequence to take effect. In -addition the dsmg600 setup code behaviour has been improved such -that a 'fixup' routine is avoided. - -Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> - -Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/nslu2-setup.c -=================================================================== ---- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-07 12:05:40.000000000 -0700 -+++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-07 12:15:56.000000000 -0700 -@@ -22,6 +22,7 @@ - #include <asm/mach-types.h> - #include <asm/mach/arch.h> - #include <asm/mach/flash.h> -+#include <asm/mach/time.h> - - static struct flash_platform_data nslu2_flash_data = { - .map_name = "cfi_probe", -@@ -157,10 +158,21 @@ - gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); - } - --static void __init nslu2_init(void) -+static void __init nslu2_timer_init(void) - { -- ixp4xx_timer_freq = NSLU2_FREQ; -+ /* The xtal on this machine is non-standard. */ -+ ixp4xx_timer_freq = NSLU2_FREQ; -+ -+ /* Call standard timer_init function. */ -+ ixp4xx_timer_init(); -+} - -+static struct sys_timer nslu2_timer = { -+ .init = nslu2_timer_init, -+}; -+ -+static void __init nslu2_init(void) -+{ - ixp4xx_sys_init(); - - nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -@@ -185,6 +197,6 @@ - .boot_params = 0x00000100, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, -- .timer = &ixp4xx_timer, -+ .timer = &nslu2_timer, - .init_machine = nslu2_init, - MACHINE_END -Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/common.c -=================================================================== ---- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/common.c 2007-05-07 12:05:40.000000000 -0700 -+++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/common.c 2007-05-07 12:15:16.000000000 -0700 -@@ -269,7 +269,7 @@ - .handler = ixp4xx_timer_interrupt, - }; - --static void __init ixp4xx_timer_init(void) -+void __init ixp4xx_timer_init(void) - { - /* Clear Pending Interrupt by writing '1' to it */ - *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; -Index: linux-2.6.21-arm/include/asm-arm/arch-ixp4xx/platform.h -=================================================================== ---- linux-2.6.21-arm.orig/include/asm-arm/arch-ixp4xx/platform.h 2007-05-07 12:05:40.000000000 -0700 -+++ linux-2.6.21-arm/include/asm-arm/arch-ixp4xx/platform.h 2007-05-07 12:15:16.000000000 -0700 -@@ -113,6 +113,7 @@ - extern void ixp4xx_map_io(void); - extern void ixp4xx_init_irq(void); - extern void ixp4xx_sys_init(void); -+extern void ixp4xx_timer_init(void); - extern struct sys_timer ixp4xx_timer; - extern void ixp4xx_pci_preinit(void); - struct pci_sys_data; -Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c -=================================================================== ---- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 12:05:42.000000000 -0700 -+++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 12:16:07.000000000 -0700 -@@ -18,6 +18,7 @@ - #include <asm/mach-types.h> - #include <asm/mach/arch.h> - #include <asm/mach/flash.h> -+#include <asm/mach/time.h> - - static struct flash_platform_data dsmg600_flash_data = { - .map_name = "cfi_probe", -@@ -128,6 +129,19 @@ - gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); - } - -+static void __init dsmg600_timer_init(void) -+{ -+ /* The xtal on this machine is non-standard. */ -+ ixp4xx_timer_freq = DSMG600_FREQ; -+ -+ /* Call standard timer_init function. */ -+ ixp4xx_timer_init(); -+} -+ -+static struct sys_timer dsmg600_timer = { -+ .init = dsmg600_timer_init, -+}; -+ - static void __init dsmg600_init(void) - { - ixp4xx_sys_init(); -@@ -155,21 +169,13 @@ - #endif - } - --static void __init dsmg600_fixup(struct machine_desc *desc, -- struct tag *tags, char **cmdline, struct meminfo *mi) --{ -- /* The xtal on this machine is non-standard. */ -- ixp4xx_timer_freq = DSMG600_FREQ; --} -- - MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") - /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, - .boot_params = 0x00000100, -- .fixup = dsmg600_fixup, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, -- .timer = &ixp4xx_timer, -+ .timer = &dsmg600_timer, - .init_machine = dsmg600_init, - MACHINE_END diff --git a/target/linux/ixp4xx-2.6/patches/080-trivial_nslu2_nas100d_cleanup.patch b/target/linux/ixp4xx-2.6/patches/080-trivial_nslu2_nas100d_cleanup.patch deleted file mode 100644 index f0bfcdec5f..0000000000 --- a/target/linux/ixp4xx-2.6/patches/080-trivial_nslu2_nas100d_cleanup.patch +++ /dev/null @@ -1,196 +0,0 @@ -This trivial patch updates the nslu2 and nas-100d headers to -remove pointless GPIO defines, and updates nslu2-setup.c -accordingly. In addition minor style cleanups to some comments -are included. - -Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> - -Index: linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c -=================================================================== ---- linux-2.6.21-armeb.orig/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-09 07:32:43.000000000 -0700 -+++ linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c 2007-05-09 07:32:46.000000000 -0700 -@@ -50,26 +50,26 @@ - static struct resource nslu2_led_resources[] = { - { - .name = "ready", /* green led */ -- .start = NSLU2_LED_GRN, -- .end = NSLU2_LED_GRN, -+ .start = NSLU2_LED_GRN_GPIO, -+ .end = NSLU2_LED_GRN_GPIO, - .flags = IXP4XX_GPIO_HIGH, - }, - { - .name = "status", /* red led */ -- .start = NSLU2_LED_RED, -- .end = NSLU2_LED_RED, -+ .start = NSLU2_LED_RED_GPIO, -+ .end = NSLU2_LED_RED_GPIO, - .flags = IXP4XX_GPIO_HIGH, - }, - { - .name = "disk-1", -- .start = NSLU2_LED_DISK1, -- .end = NSLU2_LED_DISK1, -+ .start = NSLU2_LED_DISK1_GPIO, -+ .end = NSLU2_LED_DISK1_GPIO, - .flags = IXP4XX_GPIO_LOW, - }, - { - .name = "disk-2", -- .start = NSLU2_LED_DISK2, -- .end = NSLU2_LED_DISK2, -+ .start = NSLU2_LED_DISK2_GPIO, -+ .end = NSLU2_LED_DISK2_GPIO, - .flags = IXP4XX_GPIO_LOW, - }, - }; -@@ -181,7 +181,8 @@ - - pm_power_off = nslu2_power_off; - -- /* This is only useful on a modified machine, but it is valuable -+ /* -+ * This is only useful on a modified machine, but it is valuable - * to have it first in order to see debug messages, and so that - * it does *not* get removed if platform_add_devices fails! - */ -Index: linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nslu2.h -=================================================================== ---- linux-2.6.21-armeb.orig/include/asm-arm/arch-ixp4xx/nslu2.h 2007-05-09 07:32:43.000000000 -0700 -+++ linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nslu2.h 2007-05-09 07:32:46.000000000 -0700 -@@ -9,7 +9,7 @@ - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * -- * This file is licensed under the terms of the GNU General Public -+ * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -@@ -34,36 +34,14 @@ - #define NSLU2_PCI_INTC_PIN 9 - #define NSLU2_PCI_INTD_PIN 8 - -- - /* NSLU2 Timer */ - #define NSLU2_FREQ 66000000 --#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) --#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) -- --/* GPIO */ -- --#define NSLU2_GPIO0 0 --#define NSLU2_GPIO1 1 --#define NSLU2_GPIO2 2 --#define NSLU2_GPIO3 3 --#define NSLU2_GPIO4 4 --#define NSLU2_GPIO5 5 --#define NSLU2_GPIO6 6 --#define NSLU2_GPIO7 7 --#define NSLU2_GPIO8 8 --#define NSLU2_GPIO9 9 --#define NSLU2_GPIO10 10 --#define NSLU2_GPIO11 11 --#define NSLU2_GPIO12 12 --#define NSLU2_GPIO13 13 --#define NSLU2_GPIO14 14 --#define NSLU2_GPIO15 15 - - /* Buttons */ - --#define NSLU2_PB_GPIO NSLU2_GPIO5 --#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */ --#define NSLU2_RB_GPIO NSLU2_GPIO12 -+#define NSLU2_PB_GPIO 5 -+#define NSLU2_PO_GPIO 8 /* power off */ -+#define NSLU2_RB_GPIO 12 - - #define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5 - #define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12 -@@ -79,16 +57,16 @@ - - /* LEDs */ - --#define NSLU2_LED_RED NSLU2_GPIO0 --#define NSLU2_LED_GRN NSLU2_GPIO1 -+#define NSLU2_LED_RED_GPIO 0 -+#define NSLU2_LED_GRN_GPIO 1 - --#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED) --#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN) -+#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED_GPIO) -+#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN_GPIO) - --#define NSLU2_LED_DISK1 NSLU2_GPIO3 --#define NSLU2_LED_DISK2 NSLU2_GPIO2 -+#define NSLU2_LED_DISK1_GPIO 3 -+#define NSLU2_LED_DISK2_GPIO 2 - --#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2) --#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3) -+#define NSLU2_LED_DISK1_BM (1L << NSLU2_LED_DISK1_GPIO) -+#define NSLU2_LED_DISK2_BM (1L << NSLU2_LED_DISK2_GPIO) - - -Index: linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nas100d.h -=================================================================== ---- linux-2.6.21-armeb.orig/include/asm-arm/arch-ixp4xx/nas100d.h 2007-04-25 20:08:32.000000000 -0700 -+++ linux-2.6.21-armeb/include/asm-arm/arch-ixp4xx/nas100d.h 2007-05-09 07:34:14.000000000 -0700 -@@ -10,7 +10,7 @@ - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * -- * This file is licensed under the terms of the GNU General Public -+ * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -@@ -36,31 +36,11 @@ - #define NAS100D_PCI_INTD_PIN 8 - #define NAS100D_PCI_INTE_PIN 7 - --/* GPIO */ -- --#define NAS100D_GPIO0 0 --#define NAS100D_GPIO1 1 --#define NAS100D_GPIO2 2 --#define NAS100D_GPIO3 3 --#define NAS100D_GPIO4 4 --#define NAS100D_GPIO5 5 --#define NAS100D_GPIO6 6 --#define NAS100D_GPIO7 7 --#define NAS100D_GPIO8 8 --#define NAS100D_GPIO9 9 --#define NAS100D_GPIO10 10 --#define NAS100D_GPIO11 11 --#define NAS100D_GPIO12 12 --#define NAS100D_GPIO13 13 --#define NAS100D_GPIO14 14 --#define NAS100D_GPIO15 15 -- -- - /* Buttons */ - --#define NAS100D_PB_GPIO NAS100D_GPIO14 --#define NAS100D_RB_GPIO NAS100D_GPIO4 --#define NAS100D_PO_GPIO NAS100D_GPIO12 /* power off */ -+#define NAS100D_PB_GPIO 14 -+#define NAS100D_RB_GPIO 4 -+#define NAS100D_PO_GPIO 12 /* power off */ - - #define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14 - #define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4 -Index: linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c -=================================================================== ---- linux-2.6.21-armeb.orig/arch/arm/mach-ixp4xx/nas100d-setup.c 2007-05-09 07:32:43.000000000 -0700 -+++ linux-2.6.21-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c 2007-05-09 07:34:55.000000000 -0700 -@@ -155,7 +155,8 @@ - - pm_power_off = nas100d_power_off; - -- /* This is only useful on a modified machine, but it is valuable -+ /* -+ * This is only useful on a modified machine, but it is valuable - * to have it first in order to see debug messages, and so that - * it does *not* get removed if platform_add_devices fails! - */ diff --git a/target/linux/ixp4xx-2.6/patches/100-npe_driver.patch b/target/linux/ixp4xx-2.6/patches/100-npe_driver.patch deleted file mode 100644 index 78fb119bcd..0000000000 --- a/target/linux/ixp4xx-2.6/patches/100-npe_driver.patch +++ /dev/null @@ -1,4881 +0,0 @@ -diff --git a/Documentation/networking/ixp4xx/IxNpeMicrocode.h b/Documentation/networking/ixp4xx/IxNpeMicrocode.h -new file mode 100644 -index 0000000..e5a4bd3 -Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/IxNpeMicrocode.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/IxNpeMicrocode.h 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,143 @@ -+/* -+ * IxNpeMicrocode.h - Headerfile for compiling the Intel microcode C file -+ * -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ * -+ * -+ * compile with -+ * -+ * gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode -+ * -+ * Executing the resulting binary on your build-host creates the -+ * "NPE-[ABC].xxxxxxxx" files containing the selected microcode -+ * -+ * fetch the IxNpeMicrocode.c from the Intel Access Library. -+ * It will include this header. -+ * -+ * select Images for every NPE from the following -+ * (used C++ comments for easy uncommenting ....) -+ */ -+ -+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB -+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB -+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB -+// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_TSLOT_SWITCH -+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV -+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS -+// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL -+// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT -+// #define IX_NPEDL_NPEIMAGE_NPEA_DMA -+// #define IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT -+// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT -+// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT -+// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0 -+// #define IX_NPEDL_NPEIMAGE_NPEA_WEP -+ -+ -+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB -+//#define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB -+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB -+// #define IX_NPEDL_NPEIMAGE_NPEB_DMA -+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV -+// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS -+ #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL -+ -+ -+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB -+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB -+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB -+// #define IX_NPEDL_NPEIMAGE_NPEC_DMA -+// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_SPAN -+// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_FIREWALL -+ #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_CCM_ETH -+// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_ETH_LEARN_FILTER_SPAN_FIREWALL -+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV -+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS -+// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL -+ -+ -+#include <stdio.h> -+#include <unistd.h> -+#include <stdlib.h> -+#include <netinet/in.h> -+#include <sys/types.h> -+#include <sys/stat.h> -+#include <fcntl.h> -+#include <errno.h> -+#include <endian.h> -+#include <byteswap.h> -+#include <string.h> -+ -+#if __BYTE_ORDER == __LITTLE_ENDIAN -+#define to_le32(x) (x) -+#define to_be32(x) bswap_32(x) -+#else -+#define to_be32(x) (x) -+#define to_le32(x) bswap_32(x) -+#endif -+ -+struct dl_image { -+ unsigned magic; -+ unsigned id; -+ unsigned size; -+ unsigned data[0]; -+}; -+ -+const unsigned IxNpeMicrocode_array[]; -+ -+int main(int argc, char *argv[]) -+{ -+ struct dl_image *image = (struct dl_image *)IxNpeMicrocode_array; -+ int imgsiz, i, fd, cnt; -+ const unsigned *arrayptr = IxNpeMicrocode_array; -+ const char *names[] = { "IXP425", "IXP465", "unknown" }; -+ int bigendian = 1; -+ -+ if (argc > 1) { -+ if (!strcmp(argv[1], "-le")) -+ bigendian = 0; -+ else if (!strcmp(argv[1], "-be")) -+ bigendian = 1; -+ else { -+ printf("Usage: %s <-le|-be>\n", argv[0]); -+ return EXIT_FAILURE; -+ } -+ } -+ -+ for (image = (struct dl_image *)arrayptr, cnt=0; -+ (image->id != 0xfeedf00d) && (image->magic == 0xfeedf00d); -+ image = (struct dl_image *)(arrayptr), cnt++) -+ { -+ unsigned char field[4]; -+ imgsiz = image->size + 3; -+ *(unsigned*)field = to_be32(image->id); -+ char filename[40], slnk[10]; -+ -+ sprintf(filename, "NPE-%c.%08x", (field[0] & 0xf) + 'A', -+ image->id); -+ sprintf(slnk, "NPE-%c", (field[0] & 0xf) + 'A'); -+ printf("Writing image: %s.NPE_%c Func: %2x Rev: %02x.%02x " -+ "Size: %5d to: '%s'\n", -+ names[field[0] >> 4], (field[0] & 0xf) + 'A', -+ field[1], field[2], field[3], imgsiz*4, filename); -+ fd = open(filename, O_CREAT | O_RDWR | O_TRUNC, 0644); -+ if (fd >= 0) { -+ for (i=0; i<imgsiz; i++) { -+ *(unsigned*)field = bigendian ? -+ to_be32(arrayptr[i]) : -+ to_le32(arrayptr[i]); -+ write(fd, field, sizeof(field)); -+ } -+ close(fd); -+ unlink(slnk); -+ symlink(filename, slnk); -+ } else { -+ perror(filename); -+ } -+ arrayptr += imgsiz; -+ } -+ close(fd); -+ return 0; -+} -Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/README -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/README 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,62 @@ -+Informations about the Networking Driver using the IXP4XX CPU internal NPEs -+and Queue manager. -+ -+If this driver is used, the IAL (Intel Access Library) must not be loaded. -+However, the IAL may be loaded, if this Modules are unloaded: -+ ixp4xx_npe.ko, ixp4xx_qmgr.ko ixp4xx_mac.ko -+ -+This also means that HW crypto accelleration does NOT work when using this -+driver, unless I have finished my crypto driver for NPE-C -+ -+ -+Adoption to your custom board: -+------------------------------ -+use "arch/arm/mach-ixp4xx/ixdp425-setup.c" as template: -+ -+in "static struct mac_plat_info" adopt the entry "phy_id" to your needs -+(Ask your hardware designer about the PHY id) -+ -+The order of "&mac0" and "&mac1" in the "struct platform_device" -+determines which of them becomes eth0 and eth1 -+ -+ -+The Microcode: -+--------------- -+Solution 1) -+ Configure "CONFIG_HOTPLUG" and "CONFIG_FW_LOADER" and configure -+ IXP4XX_NPE as module. -+ The default hotplug script will load the Firmware from -+ /usr/lib/hotplug/firmware/NPE-[ABC] -+ see Documentation/firmware_class/hotplug-script -+ -+ You should take care, that $ACTION is "add" and $SUBSYSTEM is "firmware" -+ to avoid unnessecary calls: -+ test $ACTION = "remove" -o $SUBSYSTEM != "firmware" && exit -+ -+Solution 2) -+ create a char-dev: "mknod /dev/misc/npe c 10 184" -+ cat the Microcode into it: -+ cat /usr/lib/hotplug/firmware/NPE-* > /dev/misc/npe -+ This also works if the driver is linked to the kernel -+ -+ Having a mix of both (e.g. solution 1 for NPE-B and solution 2 for NPE-C) -+ is perfectly ok and works. -+ -+ The state of the NPEs can be seen and changed at: -+ /sys/bus/platform/devices/ixp4xx_npe.X/state -+ -+ -+Obtaining the Microcode: -+------------------------ -+1) IxNpeMicrocode.h in this directory: -+ Download IPL_IXP400NPELIBRARYWITHCRYPTO-2_1.ZIP from Intel -+ It unpacks the Microcode IxNpeMicrocode.c -+ Read the Licence ! -+ Compile it with "gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode" on your host. -+ The resulting images can be moved to "/usr/lib/hotplug/firmware" -+ -+2) mc_grab.c in this directory: -+ Compile and execute it either on the host or on the target -+ to grab the microcode from a binary image like the RedBoot bootloader. -+ -+ -Index: linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/mc_grab.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/Documentation/networking/ixp4xx/mc_grab.c 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,97 @@ -+/* -+ * mc_grab.c - grabs IXP4XX microcode from a binary datastream -+ * e.g. The redboot bootloader.... -+ * -+ * usage: mc_grab 1010200 2010200 < /dev/mtd/0 > /dev/misc/npe -+ * -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+ -+#include <stdlib.h> -+#include <stdio.h> -+#include <unistd.h> -+#include <netinet/in.h> -+#include <sys/types.h> -+#include <sys/stat.h> -+#include <fcntl.h> -+#include <errno.h> -+#include <string.h> -+ -+#define MAX_IMG 6 -+ -+static void print_mc_info(unsigned id, int siz) -+{ -+ unsigned char buf[sizeof(unsigned)]; -+ *(unsigned*)buf = id; -+ unsigned idx; -+ const char *names[] = { "IXP425", "IXP465", "unknown" }; -+ -+ idx = (buf[0] >> 4) < 2 ? (buf[0] >> 4) : 2; -+ -+ fprintf(stderr, "Device: %s:NPE_%c Func: %2x Rev: %02x.%02x " -+ "Size: %5d bytes ID:%08x\n", names[idx], (buf[0] & 0xf)+'A', -+ buf[1], buf[2], buf[3], siz*4, ntohl(id)); -+} -+ -+int main(int argc, char *argv[]) -+{ -+ int i,j; -+ unsigned char buf[sizeof(unsigned)]; -+ unsigned magic = htonl(0xfeedf00d); -+ unsigned id, my_ids[MAX_IMG+1], siz, sizbe; -+ int ret=1, verbose=0; -+ -+ for (i=0, j=0; i<argc-1 && j<MAX_IMG; i++) { -+ if (!strcmp(argv[i+1], "-v")) -+ verbose = 1; -+ else -+ my_ids[j++] = htonl(strtoul(argv[i+1], NULL, 16)); -+ } -+ my_ids[j] = 0; -+ if (my_ids[0] == 0 && !verbose) { -+ fprintf(stderr, "Usage: %s <-v> [ID1] [ID2] [IDn]\n", argv[0]); -+ return 1; -+ } -+ -+ while ((ret=read(0, buf, sizeof(unsigned))) == sizeof(unsigned)) { -+ if (*(unsigned*)buf != magic) -+ continue; -+ if ((ret=read(0, buf, sizeof(unsigned))) != sizeof(unsigned) ) -+ break; -+ id = *(unsigned*)buf; -+ -+ if (read(0, buf, sizeof(siz)) != sizeof(siz) ) -+ break; -+ sizbe = *(unsigned*)buf; -+ siz = ntohl(sizbe); -+ -+ if (verbose) -+ print_mc_info(id, siz); -+ -+ for(i=0; my_ids[i]; i++) -+ if (id == my_ids[i]) -+ break; -+ if (!my_ids[i]) -+ continue; -+ -+ if (!verbose) -+ print_mc_info(id, siz); -+ -+ write(1, &magic, sizeof(magic)); -+ write(1, &id, sizeof(id)); -+ write(1, &sizbe, sizeof(sizbe)); -+ for (i=0; i<siz; i++) { -+ if (read(0, buf, sizeof(unsigned)) != sizeof(unsigned)) -+ break; -+ write(1, buf, sizeof(unsigned)); -+ } -+ if (i != siz) -+ break; -+ } -+ if (ret) -+ fprintf(stderr, "Error reading Microcode\n"); -+ return ret; -+} -Index: linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/common.c -=================================================================== ---- linux-2.6.21-rc1-arm.orig/arch/arm/mach-ixp4xx/common.c 2007-02-21 02:24:18.000000000 -0800 -+++ linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/common.c 2007-02-21 02:24:35.000000000 -0800 -@@ -357,6 +357,90 @@ - &ixp46x_i2c_controller - }; - -+static struct npe_plat_data npea = { -+ .name = "NPE-A", -+ .data_size = 0x800, -+ .inst_size = 0x1000, -+ .id = 0, -+}; -+ -+static struct npe_plat_data npeb = { -+ .name = "NPE-B", -+ .data_size = 0x800, -+ .inst_size = 0x800, -+ .id = 1, -+}; -+ -+static struct npe_plat_data npec = { -+ .name = "NPE-C", -+ .data_size = 0x800, -+ .inst_size = 0x800, -+ .id = 2, -+}; -+ -+static struct resource res_npea = { -+ .start = IXP4XX_NPEA_BASE_PHYS, -+ .end = IXP4XX_NPEA_BASE_PHYS + 0xfff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource res_npeb = { -+ .start = IXP4XX_NPEB_BASE_PHYS, -+ .end = IXP4XX_NPEB_BASE_PHYS + 0xfff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource res_npec = { -+ .start = IXP4XX_NPEC_BASE_PHYS, -+ .end = IXP4XX_NPEC_BASE_PHYS + 0xfff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device dev_npea = { -+ .name = "ixp4xx_npe", -+ .id = 0, -+ .dev.platform_data = &npea, -+ .num_resources = 1, -+ .resource = &res_npea, -+}; -+ -+static struct platform_device dev_npeb = { -+ .name = "ixp4xx_npe", -+ .id = 1, -+ .dev.platform_data = &npeb, -+ .num_resources = 1, -+ .resource = &res_npeb, -+}; -+ -+static struct platform_device dev_npec = { -+ .name = "ixp4xx_npe", -+ .id = 2, -+ .dev.platform_data = &npec, -+ .num_resources = 1, -+ .resource = &res_npec, -+}; -+ -+/* QMGR */ -+static struct resource res_qmgr[] = { -+{ -+ .start = IXP4XX_QMGR_BASE_PHYS, -+ .end = IXP4XX_QMGR_BASE_PHYS + IXP4XX_QMGR_REGION_SIZE -1, -+ .flags = IORESOURCE_MEM, -+}, { -+ .start = IRQ_IXP4XX_QM1, -+ .flags = IORESOURCE_IRQ, -+} }; -+ -+static struct platform_device qmgr = { -+ .name = "ixp4xx_qmgr", -+ .id = 0, -+ .dev = { -+ .coherent_dma_mask = DMA_32BIT_MASK, -+ }, -+ .num_resources = ARRAY_SIZE(res_qmgr), -+ .resource = res_qmgr, -+}; -+ - unsigned long ixp4xx_exp_bus_size; - EXPORT_SYMBOL(ixp4xx_exp_bus_size); - -@@ -378,8 +462,19 @@ - break; - } - } -+ npeb.inst_size = 0x1000; -+ npec.inst_size = 0x1000; - } - -+ platform_device_register(&qmgr); -+ -+ if (ix_fuse() & IX_FUSE_NPEA) -+ platform_device_register(&dev_npea); -+ if (ix_fuse() & IX_FUSE_NPEB) -+ platform_device_register(&dev_npeb); -+ if (ix_fuse() & IX_FUSE_NPEC) -+ platform_device_register(&dev_npec); -+ - printk("IXP4xx: Using %luMiB expansion bus window size\n", - ixp4xx_exp_bus_size >> 20); - } -Index: linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/ixdp425-setup.c -=================================================================== ---- linux-2.6.21-rc1-arm.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-02-21 02:24:18.000000000 -0800 -+++ linux-2.6.21-rc1-arm/arch/arm/mach-ixp4xx/ixdp425-setup.c 2007-02-21 02:24:35.000000000 -0800 -@@ -101,10 +101,59 @@ - .resource = ixdp425_uart_resources - }; - -+/* MACs */ -+static struct resource res_mac0 = { -+ .start = IXP4XX_EthB_BASE_PHYS, -+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource res_mac1 = { -+ .start = IXP4XX_EthC_BASE_PHYS, -+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct mac_plat_info plat_mac0 = { -+ .npe_id = 1, -+ .phy_id = 0, -+ .eth_id = 0, -+ .rxq_id = 27, -+ .txq_id = 24, -+ .rxdoneq_id = 4, -+}; -+ -+static struct mac_plat_info plat_mac1 = { -+ .npe_id = 2, -+ .phy_id = 1, -+ .eth_id = 1, -+ .rxq_id = 28, -+ .txq_id = 25, -+ .rxdoneq_id = 5, -+}; -+ -+static struct platform_device mac0 = { -+ .name = "ixp4xx_mac", -+ .id = 0, -+ .dev.platform_data = &plat_mac0, -+ .num_resources = 1, -+ .resource = &res_mac0, -+}; -+ -+static struct platform_device mac1 = { -+ .name = "ixp4xx_mac", -+ .id = 1, -+ .dev.platform_data = &plat_mac1, -+ .num_resources = 1, -+ .resource = &res_mac1, -+}; -+ - static struct platform_device *ixdp425_devices[] __initdata = { - &ixdp425_i2c_controller, - &ixdp425_flash, -- &ixdp425_uart -+ &ixdp425_uart, -+ &mac0, -+ &mac1, - }; - - static void __init ixdp425_init(void) -Index: linux-2.6.21-rc1-arm/drivers/net/Kconfig -=================================================================== ---- linux-2.6.21-rc1-arm.orig/drivers/net/Kconfig 2007-02-21 02:24:18.000000000 -0800 -+++ linux-2.6.21-rc1-arm/drivers/net/Kconfig 2007-02-21 02:24:35.000000000 -0800 -@@ -201,6 +201,8 @@ - - source "drivers/net/arm/Kconfig" - -+source "drivers/net/ixp4xx/Kconfig" -+ - config MACE - tristate "MACE (Power Mac ethernet) support" - depends on NET_ETHERNET && PPC_PMAC && PPC32 -Index: linux-2.6.21-rc1-arm/drivers/net/Makefile -=================================================================== ---- linux-2.6.21-rc1-arm.orig/drivers/net/Makefile 2007-02-21 02:24:18.000000000 -0800 -+++ linux-2.6.21-rc1-arm/drivers/net/Makefile 2007-02-21 02:24:35.000000000 -0800 -@@ -212,6 +212,7 @@ - obj-$(CONFIG_IRDA) += irda/ - obj-$(CONFIG_ETRAX_ETHERNET) += cris/ - obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/ -+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx/ - - obj-$(CONFIG_NETCONSOLE) += netconsole.o - -Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Kconfig -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Kconfig 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,48 @@ -+config IXP4XX_QMGR -+ tristate "IXP4xx Queue Manager support" -+ depends on ARCH_IXP4XX -+ depends on NET_ETHERNET -+ help -+ The IXP4XX Queue manager is a configurable hardware ringbuffer. -+ It is used by the NPEs to exchange data from and to the CPU. -+ You can either use this OR the Intel Access Library (IAL) -+ -+config IXP4XX_NPE -+ tristate "IXP4xx NPE support" -+ depends on ARCH_IXP4XX -+ depends on NET_ETHERNET -+ help -+ The IXP4XX NPE driver supports the 3 CPU co-processors called -+ "Network Processing Engines" (NPE). It adds support fo downloading -+ the Microcode (firmware) via Hotplug or character-special-device. -+ More about this at: Documentation/networking/ixp4xx/README. -+ You can either use this OR the Intel Access Library (IAL) -+ -+config IXP4XX_FW_LOAD -+ bool "Use Firmware hotplug for Microcode download" -+ depends on IXP4XX_NPE -+ select HOTPLUG -+ select FW_LOADER -+ help -+ The default hotplug script will load the Firmware from -+ /usr/lib/hotplug/firmware/NPE-[ABC] -+ see Documentation/firmware_class/hotplug-script -+ -+config IXP4XX_MAC -+ tristate "IXP4xx MAC support" -+ depends on IXP4XX_NPE -+ depends on IXP4XX_QMGR -+ depends on NET_ETHERNET -+ select MII -+ help -+ The IXP4XX MAC driver supports the MACs on the IXP4XX CPUs. -+ There are 2 on ixp425 and up to 5 on ixdp465. -+ You can either use this OR the Intel Access Library (IAL) -+ -+config IXP4XX_CRYPTO -+ tristate "IXP4xx crypto support" -+ depends on IXP4XX_NPE -+ depends on IXP4XX_QMGR -+ help -+ This driver is a generic NPE-crypto access layer. -+ You need additional code in OCF for example. -Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Makefile -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/Makefile 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,7 @@ -+obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o -+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o -+obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o -+obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o -+ -+ixp4xx_npe-objs := ucode_dl.o npe_mh.o npe.o -+ixp4xx_mac-objs := mac_driver.o phy.o -Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_crypto.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_crypto.c 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,851 @@ -+/* -+ * ixp4xx_crypto.c - interface to the HW crypto -+ * -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+#include <linux/ixp_qmgr.h> -+#include <linux/ixp_npe.h> -+#include <linux/dma-mapping.h> -+#include <linux/dmapool.h> -+#include <linux/device.h> -+#include <linux/delay.h> -+#include <linux/slab.h> -+#include <linux/kernel.h> -+#include <linux/ixp_crypto.h> -+ -+#define SEND_QID 29 -+#define RECV_QID 30 -+ -+#define NPE_ID 2 /* NPE C */ -+ -+#define QUEUE_SIZE 64 -+#define MY_VERSION "0.0.1" -+ -+/* local head for all sa_ctx */ -+static struct ix_sa_master sa_master; -+ -+static const struct ix_hash_algo _hash_algos[] = { -+{ -+ .name = "MD5", -+ .cfgword = 0xAA010004, -+ .digest_len = 16, -+ .icv = "\x01\x23\x45\x67\x89\xAB\xCD\xEF" -+ "\xFE\xDC\xBA\x98\x76\x54\x32\x10", -+ .type = HASH_TYPE_MD5, -+},{ -+ .name = "SHA1", -+ .cfgword = 0x00000005, -+ .digest_len = 20, -+ .icv = "\x67\x45\x23\x01\xEF\xCD\xAB\x89\x98\xBA" -+ "\xDC\xFE\x10\x32\x54\x76\xC3\xD2\xE1\xF0", -+ .type = HASH_TYPE_SHA1, -+#if 0 -+},{ -+ .name = "CBC MAC", -+ .digest_len = 64, -+ .aad_len = 48, -+ .type = HASH_TYPE_CBCMAC, -+#endif -+} }; -+ -+static const struct ix_cipher_algo _cipher_algos[] = { -+{ -+ .name = "DES ECB", -+ .cfgword_enc = CIPH_ENCR | MOD_DES | MOD_ECB | KEYLEN_192, -+ .cfgword_dec = CIPH_DECR | MOD_DES | MOD_ECB | KEYLEN_192, -+ .block_len = 8, -+ .type = CIPHER_TYPE_DES, -+ .mode = CIPHER_MODE_ECB, -+},{ -+ .name = "DES CBC", -+ .cfgword_enc = CIPH_ENCR | MOD_DES | MOD_CBC_ENC | KEYLEN_192, -+ .cfgword_dec = CIPH_DECR | MOD_DES | MOD_CBC_DEC | KEYLEN_192, -+ .iv_len = 8, -+ .block_len = 8, -+ .type = CIPHER_TYPE_DES, -+ .mode = CIPHER_MODE_CBC, -+},{ -+ .name = "3DES ECB", -+ .cfgword_enc = CIPH_ENCR | MOD_TDEA3 | MOD_ECB | KEYLEN_192, -+ .cfgword_dec = CIPH_DECR | MOD_TDEA3 | MOD_ECB | KEYLEN_192, -+ .block_len = 8, -+ .type = CIPHER_TYPE_3DES, -+ .mode = CIPHER_MODE_ECB, -+},{ -+ .name = "3DES CBC", -+ .cfgword_enc = CIPH_ENCR | MOD_TDEA3 | MOD_CBC_ENC | KEYLEN_192, -+ .cfgword_dec = CIPH_DECR | MOD_TDEA3 | MOD_CBC_DEC | KEYLEN_192, -+ .iv_len = 8, -+ .block_len = 8, -+ .type = CIPHER_TYPE_3DES, -+ .mode = CIPHER_MODE_CBC, -+},{ -+ .name = "AES ECB", -+ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_ECB, -+ .cfgword_dec = CIPH_DECR | ALGO_AES | MOD_ECB, -+ .block_len = 16, -+ .type = CIPHER_TYPE_AES, -+ .mode = CIPHER_MODE_ECB, -+},{ -+ .name = "AES CBC", -+ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CBC_ENC, -+ .cfgword_dec = CIPH_DECR | ALGO_AES | MOD_CBC_DEC, -+ .block_len = 16, -+ .iv_len = 16, -+ .type = CIPHER_TYPE_AES, -+ .mode = CIPHER_MODE_CBC, -+},{ -+ .name = "AES CTR", -+ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CTR, -+ .cfgword_dec = CIPH_ENCR | ALGO_AES | MOD_CTR, -+ .block_len = 16, -+ .iv_len = 16, -+ .type = CIPHER_TYPE_AES, -+ .mode = CIPHER_MODE_CTR, -+#if 0 -+},{ -+ .name = "AES CCM", -+ .cfgword_enc = CIPH_ENCR | ALGO_AES | MOD_CCM_ENC, -+ .cfgword_dec = CIPH_ENCR | ALGO_AES | MOD_CCM_DEC, -+ .block_len = 16, -+ .iv_len = 16, -+ .type = CIPHER_TYPE_AES, -+ .mode = CIPHER_MODE_CCM, -+#endif -+} }; -+ -+const struct ix_hash_algo *ix_hash_by_id(int type) -+{ -+ int i; -+ -+ for(i=0; i<ARRAY_SIZE(_hash_algos); i++) { -+ if (_hash_algos[i].type == type) -+ return _hash_algos + i; -+ } -+ return NULL; -+} -+ -+const struct ix_cipher_algo *ix_cipher_by_id(int type, int mode) -+{ -+ int i; -+ -+ for(i=0; i<ARRAY_SIZE(_cipher_algos); i++) { -+ if (_cipher_algos[i].type==type && _cipher_algos[i].mode==mode) -+ return _cipher_algos + i; -+ } -+ return NULL; -+} -+ -+static void irqcb_recv(struct qm_queue *queue); -+ -+static int init_sa_master(struct ix_sa_master *master) -+{ -+ struct npe_info *npe; -+ int ret = -ENODEV; -+ -+ if (! (ix_fuse() & (IX_FUSE_HASH | IX_FUSE_AES | IX_FUSE_DES))) { -+ printk(KERN_ERR "ixp_crypto: No HW crypto available\n"); -+ return ret; -+ } -+ memset(master, 0, sizeof(struct ix_sa_master)); -+ master->npe_dev = get_npe_by_id(NPE_ID); -+ if (! master->npe_dev) -+ goto err; -+ -+ npe = dev_get_drvdata(master->npe_dev); -+ -+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) { -+ switch (npe->img_info[1]) { -+ case 4: -+ printk(KERN_INFO "Crypto AES avaialable\n"); -+ break; -+ case 5: -+ printk(KERN_INFO "Crypto AES and CCM avaialable\n"); -+ break; -+ default: -+ printk(KERN_WARNING "Current microcode for %s has no" -+ " crypto capabilities\n", npe->plat->name); -+ break; -+ } -+ } -+ rwlock_init(&master->lock); -+ master->dmapool = dma_pool_create("ixp4xx_crypto", master->npe_dev, -+ sizeof(struct npe_crypt_cont), 32, 0); -+ if (!master->dmapool) { -+ ret = -ENOMEM; -+ goto err; -+ } -+ master->sendq = request_queue(SEND_QID, QUEUE_SIZE); -+ if (IS_ERR(master->sendq)) { -+ printk(KERN_ERR "ixp4xx_crypto: Error requesting Q: %d\n", -+ SEND_QID); -+ ret = PTR_ERR(master->sendq); -+ goto err; -+ } -+ master->recvq = request_queue(RECV_QID, QUEUE_SIZE); -+ if (IS_ERR(master->recvq)) { -+ printk(KERN_ERR "ixp4xx_crypto: Error requesting Q: %d\n", -+ RECV_QID); -+ ret = PTR_ERR(master->recvq); -+ release_queue(master->sendq); -+ goto err; -+ } -+ -+ master->recvq->irq_cb = irqcb_recv; -+ queue_set_watermarks(master->recvq, 0, 0); -+ queue_set_irq_src(master->recvq, Q_IRQ_ID_NOT_E); -+ queue_enable_irq(master->recvq); -+ printk(KERN_INFO "ixp4xx_crypto " MY_VERSION " registered successfully\n"); -+ -+ return 0; -+err: -+ if (master->dmapool) -+ dma_pool_destroy(master->dmapool); -+ if (! master->npe_dev) -+ put_device(master->npe_dev); -+ return ret; -+ -+} -+ -+static void release_sa_master(struct ix_sa_master *master) -+{ -+ struct npe_crypt_cont *cont; -+ unsigned long flags; -+ -+ write_lock_irqsave(&master->lock, flags); -+ while (master->pool) { -+ cont = master->pool; -+ master->pool = cont->next; -+ dma_pool_free(master->dmapool, cont, cont->phys); -+ master->pool_size--; -+ } -+ write_unlock_irqrestore(&master->lock, flags); -+ if (master->pool_size) { -+ printk(KERN_ERR "ixp4xx_crypto: %d items lost from DMA pool\n", -+ master->pool_size); -+ } -+ -+ dma_pool_destroy(master->dmapool); -+ release_queue(master->sendq); -+ release_queue(master->recvq); -+ return_npe_dev(master->npe_dev); -+} -+ -+static struct npe_crypt_cont *ix_sa_get_cont(struct ix_sa_master *master) -+{ -+ unsigned long flags; -+ struct npe_crypt_cont *cont; -+ dma_addr_t handle; -+ -+ write_lock_irqsave(&master->lock, flags); -+ if (!master->pool) { -+ cont = dma_pool_alloc(master->dmapool, GFP_ATOMIC, &handle); -+ if (cont) { -+ master->pool_size++; -+ cont->phys = handle; -+ cont->virt = cont; -+ } -+ } else { -+ cont = master->pool; -+ master->pool = cont->next; -+ } -+ write_unlock_irqrestore(&master->lock, flags); -+ return cont; -+} -+ -+static void -+ix_sa_return_cont(struct ix_sa_master *master,struct npe_crypt_cont *cont) -+{ -+ unsigned long flags; -+ -+ write_lock_irqsave(&master->lock, flags); -+ cont->next = master->pool; -+ master->pool = cont; -+ write_unlock_irqrestore(&master->lock, flags); -+} -+ -+static void free_sa_dir(struct ix_sa_ctx *sa_ctx, struct ix_sa_dir *dir) -+{ -+ memset(dir->npe_ctx, 0, NPE_CTX_LEN); -+ dma_pool_free(sa_ctx->master->dmapool, dir->npe_ctx, -+ dir->npe_ctx_phys); -+} -+ -+static void ix_sa_ctx_destroy(struct ix_sa_ctx *sa_ctx) -+{ -+ BUG_ON(sa_ctx->state != STATE_UNLOADING); -+ free_sa_dir(sa_ctx, &sa_ctx->encrypt); -+ free_sa_dir(sa_ctx, &sa_ctx->decrypt); -+ kfree(sa_ctx); -+ module_put(THIS_MODULE); -+} -+ -+static void recv_pack(struct qm_queue *queue, u32 phys) -+{ -+ struct ix_sa_ctx *sa_ctx; -+ struct npe_crypt_cont *cr_cont; -+ struct npe_cont *cont; -+ int failed; -+ -+ failed = phys & 0x1; -+ phys &= ~0x3; -+ -+ cr_cont = dma_to_virt(queue->dev, phys); -+ cr_cont = cr_cont->virt; -+ sa_ctx = cr_cont->ctl.crypt.sa_ctx; -+ -+ phys = npe_to_cpu32(cr_cont->ctl.crypt.src_buf); -+ if (phys) { -+ cont = dma_to_virt(queue->dev, phys); -+ cont = cont->virt; -+ } else { -+ cont = NULL; -+ } -+ if (cr_cont->ctl.crypt.oper_type == OP_PERFORM) { -+ dma_unmap_single(sa_ctx->master->npe_dev, -+ cont->eth.phys_addr, -+ cont->eth.buf_len, -+ DMA_BIDIRECTIONAL); -+ if (sa_ctx->perf_cb) -+ sa_ctx->perf_cb(sa_ctx, cont->data, failed); -+ qmgr_return_cont(dev_get_drvdata(queue->dev), cont); -+ ix_sa_return_cont(sa_ctx->master, cr_cont); -+ if (atomic_dec_and_test(&sa_ctx->use_cnt)) -+ ix_sa_ctx_destroy(sa_ctx); -+ return; -+ } -+ -+ /* We are registering */ -+ switch (cr_cont->ctl.crypt.mode) { -+ case NPE_OP_HASH_GEN_ICV: -+ /* 1 out of 2 HMAC preparation operations completed */ -+ dma_unmap_single(sa_ctx->master->npe_dev, -+ cont->eth.phys_addr, -+ cont->eth.buf_len, -+ DMA_TO_DEVICE); -+ kfree(cont->data); -+ qmgr_return_cont(dev_get_drvdata(queue->dev), cont); -+ break; -+ case NPE_OP_ENC_GEN_KEY: -+ memcpy(sa_ctx->decrypt.npe_ctx + sizeof(u32), -+ sa_ctx->rev_aes->ctl.rev_aes_key + sizeof(u32), -+ sa_ctx->c_key.len); -+ /* REV AES data not needed anymore, free it */ -+ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes); -+ sa_ctx->rev_aes = NULL; -+ break; -+ default: -+ printk(KERN_ERR "Unknown crypt-register mode: %x\n", -+ cr_cont->ctl.crypt.mode); -+ -+ } -+ if (cr_cont->ctl.crypt.oper_type == OP_REG_DONE) { -+ if (sa_ctx->state == STATE_UNREGISTERED) -+ sa_ctx->state = STATE_REGISTERED; -+ if (sa_ctx->reg_cb) -+ sa_ctx->reg_cb(sa_ctx, failed); -+ } -+ ix_sa_return_cont(sa_ctx->master, cr_cont); -+ if (atomic_dec_and_test(&sa_ctx->use_cnt)) -+ ix_sa_ctx_destroy(sa_ctx); -+} -+ -+static void irqcb_recv(struct qm_queue *queue) -+{ -+ u32 phys; -+ -+ queue_ack_irq(queue); -+ while ((phys = queue_get_entry(queue))) -+ recv_pack(queue, phys); -+} -+ -+static int init_sa_dir(struct ix_sa_ctx *sa_ctx, struct ix_sa_dir *dir) -+{ -+ dir->npe_ctx = dma_pool_alloc(sa_ctx->master->dmapool, -+ sa_ctx->gfp_flags, &dir->npe_ctx_phys); -+ if (!dir->npe_ctx) { -+ return 1; -+ } -+ memset(dir->npe_ctx, 0, NPE_CTX_LEN); -+ return 0; -+} -+ -+struct ix_sa_ctx *ix_sa_ctx_new(int priv_len, gfp_t flags) -+{ -+ struct ix_sa_ctx *sa_ctx; -+ struct ix_sa_master *master = &sa_master; -+ struct npe_info *npe = dev_get_drvdata(master->npe_dev); -+ -+ /* first check if Microcode was downloaded into this NPE */ -+ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) { -+ printk(KERN_ERR "%s not running\n", npe->plat->name); -+ return NULL; -+ } -+ switch (npe->img_info[1]) { -+ case 4: -+ case 5: -+ break; -+ default: -+ /* No crypto Microcode */ -+ return NULL; -+ } -+ if (!try_module_get(THIS_MODULE)) { -+ return NULL; -+ } -+ -+ sa_ctx = kzalloc(sizeof(struct ix_sa_ctx) + priv_len, flags); -+ if (!sa_ctx) { -+ goto err_put; -+ } -+ -+ sa_ctx->master = master; -+ sa_ctx->gfp_flags = flags; -+ -+ if (init_sa_dir(sa_ctx, &sa_ctx->encrypt)) -+ goto err_free; -+ if (init_sa_dir(sa_ctx, &sa_ctx->decrypt)) { -+ free_sa_dir(sa_ctx, &sa_ctx->encrypt); -+ goto err_free; -+ } -+ if (priv_len) -+ sa_ctx->priv = sa_ctx + 1; -+ -+ atomic_set(&sa_ctx->use_cnt, 1); -+ return sa_ctx; -+ -+err_free: -+ kfree(sa_ctx); -+err_put: -+ module_put(THIS_MODULE); -+ return NULL; -+} -+ -+void ix_sa_ctx_free(struct ix_sa_ctx *sa_ctx) -+{ -+ sa_ctx->state = STATE_UNLOADING; -+ if (atomic_dec_and_test(&sa_ctx->use_cnt)) -+ ix_sa_ctx_destroy(sa_ctx); -+ else -+ printk("ix_sa_ctx_free -> delayed: %p %d\n", -+ sa_ctx, atomic_read(&sa_ctx->use_cnt)); -+} -+ -+/* http://www.ietf.org/rfc/rfc2104.txt */ -+#define HMAC_IPAD_VALUE 0x36 -+#define HMAC_OPAD_VALUE 0x5C -+#define PAD_BLOCKLEN 64 -+ -+static int register_chain_var(struct ix_sa_ctx *sa_ctx, -+ unsigned char *pad, u32 target, int init_len, u32 ctx_addr, int oper) -+{ -+ struct npe_crypt_cont *cr_cont; -+ struct npe_cont *cont; -+ -+ cr_cont = ix_sa_get_cont(sa_ctx->master); -+ if (!cr_cont) -+ return -ENOMEM; -+ -+ cr_cont->ctl.crypt.sa_ctx = sa_ctx; -+ cr_cont->ctl.crypt.auth_offs = 0; -+ cr_cont->ctl.crypt.auth_len =cpu_to_npe16(PAD_BLOCKLEN); -+ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(ctx_addr); -+ -+ cont = qmgr_get_cont(dev_get_drvdata(sa_ctx->master->sendq->dev)); -+ if (!cont) { -+ ix_sa_return_cont(sa_ctx->master, cr_cont); -+ return -ENOMEM; -+ } -+ -+ cont->data = pad; -+ cont->eth.next = 0; -+ cont->eth.buf_len = cpu_to_npe16(PAD_BLOCKLEN); -+ cont->eth.pkt_len = 0; -+ -+ cont->eth.phys_addr = cpu_to_npe32(dma_map_single( -+ sa_ctx->master->npe_dev, pad, PAD_BLOCKLEN, DMA_TO_DEVICE)); -+ -+ cr_cont->ctl.crypt.src_buf = cpu_to_npe32(cont->phys); -+ cr_cont->ctl.crypt.oper_type = oper; -+ -+ cr_cont->ctl.crypt.addr.icv = cpu_to_npe32(target); -+ cr_cont->ctl.crypt.mode = NPE_OP_HASH_GEN_ICV; -+ cr_cont->ctl.crypt.init_len = init_len; -+ -+ atomic_inc(&sa_ctx->use_cnt); -+ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys); -+ if (queue_stat(sa_ctx->master->sendq) == 2) { /* overflow */ -+ atomic_dec(&sa_ctx->use_cnt); -+ qmgr_return_cont(dev_get_drvdata(sa_ctx->master->sendq->dev), -+ cont); -+ ix_sa_return_cont(sa_ctx->master, cr_cont); -+ return -ENOMEM; -+ } -+ return 0; -+} -+ -+/* Return value -+ * 0 if nothing registered, -+ * 1 if something registered and -+ * < 0 on error -+ */ -+static int ix_sa_ctx_setup_auth(struct ix_sa_ctx *sa_ctx, -+ const struct ix_hash_algo *algo, int len, int oper, int encrypt) -+{ -+ unsigned char *ipad, *opad; -+ u32 itarget, otarget, ctx_addr; -+ unsigned char *cinfo; -+ int init_len, i, ret = 0; -+ struct qm_qmgr *qmgr; -+ struct ix_sa_dir *dir; -+ u32 cfgword; -+ -+ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt; -+ cinfo = dir->npe_ctx + dir->npe_ctx_idx; -+ -+ qmgr = dev_get_drvdata(sa_ctx->master->sendq->dev); -+ -+ cinfo = dir->npe_ctx + dir->npe_ctx_idx; -+ sa_ctx->h_algo = algo; -+ -+ if (!algo) { -+ dir->npe_mode |= NPE_OP_HMAC_DISABLE; -+ return 0; -+ } -+ if (algo->type == HASH_TYPE_CBCMAC) { -+ dir->npe_mode |= NPE_OP_CCM_ENABLE | NPE_OP_HMAC_DISABLE; -+ return 0; -+ } -+ if (sa_ctx->h_key.len > 64 || sa_ctx->h_key.len < algo->digest_len) -+ return -EINVAL; -+ if (len > algo->digest_len || (len % 4)) -+ return -EINVAL; -+ if (!len) -+ len = algo->digest_len; -+ -+ sa_ctx->digest_len = len; -+ -+ /* write cfg word to cryptinfo */ -+ cfgword = algo->cfgword | ((len/4) << 8); -+ *(u32*)cinfo = cpu_to_be32(cfgword); -+ cinfo += sizeof(cfgword); -+ -+ /* write ICV to cryptinfo */ -+ memcpy(cinfo, algo->icv, algo->digest_len); -+ cinfo += algo->digest_len; -+ -+ itarget = dir->npe_ctx_phys + dir->npe_ctx_idx -+ + sizeof(algo->cfgword); -+ otarget = itarget + algo->digest_len; -+ -+ opad = kzalloc(PAD_BLOCKLEN, sa_ctx->gfp_flags | GFP_DMA); -+ if (!opad) { -+ return -ENOMEM; -+ } -+ ipad = kzalloc(PAD_BLOCKLEN, sa_ctx->gfp_flags | GFP_DMA); -+ if (!ipad) { -+ kfree(opad); -+ return -ENOMEM; -+ } -+ memcpy(ipad, sa_ctx->h_key.key, sa_ctx->h_key.len); -+ memcpy(opad, sa_ctx->h_key.key, sa_ctx->h_key.len); -+ for (i = 0; i < PAD_BLOCKLEN; i++) { -+ ipad[i] ^= HMAC_IPAD_VALUE; -+ opad[i] ^= HMAC_OPAD_VALUE; -+ } -+ init_len = cinfo - (dir->npe_ctx + dir->npe_ctx_idx); -+ ctx_addr = dir->npe_ctx_phys + dir->npe_ctx_idx; -+ -+ dir->npe_ctx_idx += init_len; -+ dir->npe_mode |= NPE_OP_HASH_ENABLE; -+ -+ if (!encrypt) -+ dir->npe_mode |= NPE_OP_HASH_VERIFY; -+ -+ /* register first chainvar */ -+ ret = register_chain_var(sa_ctx, opad, otarget, -+ init_len, ctx_addr, OP_REGISTER); -+ if (ret) { -+ kfree(ipad); -+ kfree(opad); -+ return ret; -+ } -+ -+ /* register second chainvar */ -+ ret = register_chain_var(sa_ctx, ipad, itarget, -+ init_len, ctx_addr, oper); -+ if (ret) { -+ kfree(ipad); -+ return ret; -+ } -+ -+ return 1; -+} -+ -+static int gen_rev_aes_key(struct ix_sa_ctx *sa_ctx, -+ u32 keylen_cfg, int cipher_op) -+{ -+ unsigned char *cinfo; -+ struct npe_crypt_cont *cr_cont; -+ -+ keylen_cfg |= CIPH_ENCR | ALGO_AES | MOD_ECB; -+ sa_ctx->rev_aes = ix_sa_get_cont(sa_ctx->master); -+ if (!sa_ctx->rev_aes) -+ return -ENOMEM; -+ -+ cinfo = sa_ctx->rev_aes->ctl.rev_aes_key; -+ *(u32*)cinfo = cpu_to_be32(keylen_cfg); -+ cinfo += sizeof(keylen_cfg); -+ -+ memcpy(cinfo, sa_ctx->c_key.key, sa_ctx->c_key.len); -+ -+ cr_cont = ix_sa_get_cont(sa_ctx->master); -+ if (!cr_cont) { -+ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes); -+ sa_ctx->rev_aes = NULL; -+ return -ENOMEM; -+ } -+ cr_cont->ctl.crypt.sa_ctx = sa_ctx; -+ cr_cont->ctl.crypt.oper_type = cipher_op; -+ -+ cr_cont->ctl.crypt.crypt_offs = 0; -+ cr_cont->ctl.crypt.crypt_len = cpu_to_npe16(AES_BLOCK128); -+ cr_cont->ctl.crypt.addr.rev_aes = cpu_to_npe32( -+ sa_ctx->rev_aes->phys + sizeof(keylen_cfg)); -+ -+ cr_cont->ctl.crypt.src_buf = 0; -+ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(sa_ctx->rev_aes->phys); -+ cr_cont->ctl.crypt.mode = NPE_OP_ENC_GEN_KEY; -+ cr_cont->ctl.crypt.init_len = sa_ctx->decrypt.npe_ctx_idx; -+ -+ atomic_inc(&sa_ctx->use_cnt); -+ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys); -+ if (queue_stat(sa_ctx->master->sendq) == 2) { /* overflow */ -+ atomic_dec(&sa_ctx->use_cnt); -+ ix_sa_return_cont(sa_ctx->master, cr_cont); -+ ix_sa_return_cont(sa_ctx->master, sa_ctx->rev_aes); -+ sa_ctx->rev_aes = NULL; -+ return -ENOMEM; -+ } -+ -+ return 1; -+} -+ -+/* Return value -+ * 0 if nothing registered, -+ * 1 if something registered and -+ * < 0 on error -+ */ -+static int ix_sa_ctx_setup_cipher(struct ix_sa_ctx *sa_ctx, -+ const struct ix_cipher_algo *algo, int cipher_op, int encrypt) -+{ -+ unsigned char *cinfo; -+ int keylen, init_len; -+ u32 cipher_cfg; -+ u32 keylen_cfg = 0; -+ struct ix_sa_dir *dir; -+ -+ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt; -+ cinfo = dir->npe_ctx + dir->npe_ctx_idx; -+ -+ sa_ctx->c_algo = algo; -+ -+ if (!algo) -+ return 0; -+ -+ if (algo->type == CIPHER_TYPE_DES && sa_ctx->c_key.len != 8) -+ return -EINVAL; -+ -+ if (algo->type == CIPHER_TYPE_3DES && sa_ctx->c_key.len != 24) -+ return -EINVAL; -+ -+ keylen = 24; -+ -+ if (encrypt) { -+ cipher_cfg = algo->cfgword_enc; -+ dir->npe_mode |= NPE_OP_CRYPT_ENCRYPT; -+ } else { -+ cipher_cfg = algo->cfgword_dec; -+ } -+ if (algo->type == CIPHER_TYPE_AES) { -+ switch (sa_ctx->c_key.len) { -+ case 16: keylen_cfg = MOD_AES128 | KEYLEN_128; break; -+ case 24: keylen_cfg = MOD_AES192 | KEYLEN_192; break; -+ case 32: keylen_cfg = MOD_AES256 | KEYLEN_256; break; -+ default: return -EINVAL; -+ } -+ keylen = sa_ctx->c_key.len; -+ cipher_cfg |= keylen_cfg; -+ } -+ -+ /* write cfg word to cryptinfo */ -+ *(u32*)cinfo = cpu_to_be32(cipher_cfg); -+ cinfo += sizeof(cipher_cfg); -+ -+ /* write cipher key to cryptinfo */ -+ memcpy(cinfo, sa_ctx->c_key.key, sa_ctx->c_key.len); -+ cinfo += keylen; -+ -+ init_len = cinfo - (dir->npe_ctx + dir->npe_ctx_idx); -+ dir->npe_ctx_idx += init_len; -+ -+ dir->npe_mode |= NPE_OP_CRYPT_ENABLE; -+ -+ if (algo->type == CIPHER_TYPE_AES && !encrypt) { -+ return gen_rev_aes_key(sa_ctx, keylen_cfg, cipher_op); -+ } -+ -+ return 0; -+} -+ -+/* returns 0 on OK, <0 on error and 1 on overflow */ -+int ix_sa_crypto_perform(struct ix_sa_ctx *sa_ctx, u8 *data, void *ptr, -+ int datalen, int c_offs, int c_len, int a_offs, int a_len, -+ int hmac, char *iv, int encrypt) -+{ -+ struct npe_crypt_cont *cr_cont; -+ struct npe_cont *cont; -+ u32 data_phys; -+ int ret = -ENOMEM; -+ struct ix_sa_dir *dir; -+ -+ dir = encrypt ? &sa_ctx->encrypt : &sa_ctx->decrypt; -+ -+ if (sa_ctx->state != STATE_REGISTERED) -+ return -ENOENT; -+ -+ cr_cont = ix_sa_get_cont(sa_ctx->master); -+ if (!cr_cont) -+ return ret; -+ -+ cr_cont->ctl.crypt.sa_ctx = sa_ctx; -+ cr_cont->ctl.crypt.crypto_ctx = cpu_to_npe32(dir->npe_ctx_phys); -+ cr_cont->ctl.crypt.oper_type = OP_PERFORM; -+ cr_cont->ctl.crypt.mode = dir->npe_mode; -+ cr_cont->ctl.crypt.init_len = dir->npe_ctx_idx; -+ -+ if (sa_ctx->c_algo) { -+ cr_cont->ctl.crypt.crypt_offs = cpu_to_npe16(c_offs); -+ cr_cont->ctl.crypt.crypt_len = cpu_to_npe16(c_len); -+ if (sa_ctx->c_algo->iv_len) { -+ if (!iv) { -+ ret = -EINVAL; -+ goto err_cr; -+ } -+ memcpy(cr_cont->ctl.crypt.iv, iv, -+ sa_ctx->c_algo->iv_len); -+ } -+ } -+ -+ if (sa_ctx->h_algo) { -+ /* prepare hashing */ -+ cr_cont->ctl.crypt.auth_offs = cpu_to_npe16(a_offs); -+ cr_cont->ctl.crypt.auth_len = cpu_to_npe16(a_len); -+ } -+ -+ data_phys = dma_map_single(sa_ctx->master->npe_dev, -+ data, datalen, DMA_BIDIRECTIONAL); -+ if (hmac) -+ cr_cont->ctl.crypt.addr.icv = cpu_to_npe32(data_phys + hmac); -+ -+ /* Prepare the data ptr */ -+ cont = qmgr_get_cont(dev_get_drvdata(sa_ctx->master->sendq->dev)); -+ if (!cont) { -+ goto err_unmap; -+ } -+ -+ cont->data = ptr; -+ cont->eth.next = 0; -+ cont->eth.buf_len = cpu_to_npe16(datalen); -+ cont->eth.pkt_len = 0; -+ -+ cont->eth.phys_addr = cpu_to_npe32(data_phys); -+ cr_cont->ctl.crypt.src_buf = cpu_to_npe32(cont->phys); -+ -+ atomic_inc(&sa_ctx->use_cnt); -+ queue_put_entry(sa_ctx->master->sendq, cr_cont->phys); -+ if (queue_stat(sa_ctx->master->sendq) != 2) { -+ return 0; -+ } -+ -+ /* overflow */ -+ printk("%s: Overflow\n", __FUNCTION__); -+ ret = -EAGAIN; -+ atomic_dec(&sa_ctx->use_cnt); -+ qmgr_return_cont(dev_get_drvdata(sa_ctx->master->sendq->dev), cont); -+ -+err_unmap: -+ dma_unmap_single(sa_ctx->master->npe_dev, data_phys, datalen, -+ DMA_BIDIRECTIONAL); -+err_cr: -+ ix_sa_return_cont(sa_ctx->master, cr_cont); -+ -+ return ret; -+} -+ -+int ix_sa_ctx_setup_cipher_auth(struct ix_sa_ctx *sa_ctx, -+ const struct ix_cipher_algo *cipher, -+ const struct ix_hash_algo *auth, int len) -+{ -+ int ret = 0, sum = 0; -+ int cipher_op; -+ -+ if (sa_ctx->state != STATE_UNREGISTERED) -+ return -ENOENT; -+ -+ atomic_inc(&sa_ctx->use_cnt); -+ -+ cipher_op = auth ? OP_REGISTER : OP_REG_DONE; -+ if ((ret = ix_sa_ctx_setup_cipher(sa_ctx, cipher, OP_REGISTER, 1)) < 0) -+ goto out; -+ sum += ret; -+ if ((ret = ix_sa_ctx_setup_cipher(sa_ctx, cipher, cipher_op, 0)) < 0) -+ goto out; -+ sum += ret; -+ if ((ret = ix_sa_ctx_setup_auth(sa_ctx, auth, len, OP_REGISTER, 1)) < 0) -+ goto out; -+ sum += ret; -+ if ((ret = ix_sa_ctx_setup_auth(sa_ctx, auth, len, OP_REG_DONE, 0)) < 0) -+ goto out; -+ sum += ret; -+ -+ /* Nothing registered ? -+ * Ok, then we are done and call the callback here. -+ */ -+ if (!sum) { -+ if (sa_ctx->state == STATE_UNREGISTERED) -+ sa_ctx->state = STATE_REGISTERED; -+ if (sa_ctx->reg_cb) -+ sa_ctx->reg_cb(sa_ctx, 0); -+ } -+out: -+ atomic_dec(&sa_ctx->use_cnt); -+ return ret; -+} -+ -+static int __init init_crypto(void) -+{ -+ return init_sa_master(&sa_master); -+} -+ -+static void __exit finish_crypto(void) -+{ -+ release_sa_master(&sa_master); -+} -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>"); -+ -+EXPORT_SYMBOL(ix_hash_by_id); -+EXPORT_SYMBOL(ix_cipher_by_id); -+ -+EXPORT_SYMBOL(ix_sa_ctx_new); -+EXPORT_SYMBOL(ix_sa_ctx_free); -+EXPORT_SYMBOL(ix_sa_ctx_setup_cipher_auth); -+EXPORT_SYMBOL(ix_sa_crypto_perform); -+ -+module_init(init_crypto); -+module_exit(finish_crypto); -+ -Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_qmgr.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ixp4xx_qmgr.c 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,474 @@ -+/* -+ * qmgr.c - reimplementation of the queue configuration interface. -+ * -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/fs.h> -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/dmapool.h> -+#include <linux/interrupt.h> -+#include <linux/err.h> -+#include <linux/delay.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+ -+#include <linux/ixp_qmgr.h> -+#include <linux/ixp_npe.h> -+ -+#define IXQMGR_VERSION "IXP4XX Q Manager 0.2.1" -+ -+static struct device *qmgr_dev = NULL; -+ -+static int poll_freq = 4000; -+static int poll_enable = 0; -+static u32 timer_countup_ticks; -+ -+module_param(poll_freq, int, 0644); -+module_param(poll_enable, int, 0644); -+ -+int queue_len(struct qm_queue *queue) -+{ -+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); -+ int diff, offs; -+ u32 val; -+ -+ offs = queue->id/8 + QUE_LOW_STAT0; -+ val = *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id); -+ -+ diff = (val - (val >> 7)) & 0x7f; -+ if (!diff) { -+ /* diff == 0 means either empty or full, must look at STAT0 */ -+ if ((*(qmgr->addr + offs) >> ((queue->id % 8)*4)) & 0x04) -+ diff = queue->len; -+ } -+ return diff; -+} -+ -+static int request_pool(struct device *dev, int count) -+{ -+ int i; -+ struct npe_cont *cont; -+ struct qm_qmgr *qmgr = dev_get_drvdata(dev); -+ dma_addr_t handle; -+ -+ for (i=0; i<count; i++) { -+ cont = dma_pool_alloc(qmgr->dmapool, GFP_KERNEL, &handle); -+ if (!cont) { -+ return -ENOMEM; -+ } -+ cont->phys = handle; -+ cont->virt = cont; -+ write_lock(&qmgr->lock); -+ cont->next = qmgr->pool; -+ qmgr->pool = cont; -+ write_unlock(&qmgr->lock); -+ } -+ return 0; -+} -+ -+static int free_pool(struct device *dev, int count) -+{ -+ int i; -+ struct npe_cont *cont; -+ struct qm_qmgr *qmgr = dev_get_drvdata(dev); -+ -+ for (i=0; i<count; i++) { -+ write_lock(&qmgr->lock); -+ cont = qmgr->pool; -+ if (!cont) { -+ write_unlock(&qmgr->lock); -+ return -1; -+ } -+ qmgr->pool = cont->next; -+ write_unlock(&qmgr->lock); -+ dma_pool_free(qmgr->dmapool, cont, cont->phys); -+ } -+ return 0; -+} -+ -+static int get_free_qspace(struct qm_qmgr *qmgr, int len) -+{ -+ int words = (qmgr->res->end - qmgr->res->start + 1) / 4 - -+ IX_QMGR_SRAM_SPACE; -+ int i,q; -+ -+ for (i=0; i<words; i+=len) { -+ for (q=0; q<MAX_QUEUES; q++) { -+ struct qm_queue *qu = qmgr->queues[q]; -+ if (!qu) -+ continue; -+ if ((qu->addr + qu->len > i) && (qu->addr < i + len)) -+ break; -+ } -+ if (q == MAX_QUEUES) { -+ /* we have a free address */ -+ return i; -+ } -+ } -+ return -1; -+} -+ -+static inline int _log2(int x) -+{ -+ int r=0; -+ while(x>>=1) -+ r++; -+ return r; -+} -+ -+/* -+ * 32bit Config registers at IX_QMGR_QUECONFIG_BASE_OFFSET[Qid] -+ * 0 - 6 WRPTR Word offset to baseaddr (index 0 .. BSIZE-1) -+ * 7 -13 RDPTR '' -+ * 14 -21 BADDR baseaddr = (offset to IX_QMGR_QUEBUFFER_SPACE_OFFSET) >> 6 -+ * 22 -23 ESIZE entrySizeInWords (always 00 because entrySizeInWords==1) -+ * 24 -25 BSIZE qSizeInWords 00=16,01=32,10=64,11=128 -+ * 26 -28 NE nearly empty -+ * 29 -31 NF nearly full -+ */ -+static int conf_q_regs(struct qm_queue *queue) -+{ -+ int bsize = _log2(queue->len/16); -+ int baddr = queue->addr + IX_QMGR_QCFG_SIZE; -+ -+ /* +2, because baddr is in words and not in bytes */ -+ queue_write_cfg_reg(queue, (bsize << 24) | (baddr<<(14-6+2)) ); -+ -+ return 0; -+} -+ -+static void pmu_timer_restart(void) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ __asm__(" mcr p14,0,%0,c1,c1,0\n" /* write current counter */ -+ : : "r" (timer_countup_ticks)); -+ -+ __asm__(" mrc p14,0,r1,c4,c1,0; " /* get int enable register */ -+ " orr r1,r1,#1; " -+ " mcr p14,0,r1,c5,c1,0; " /* clear overflow */ -+ " mcr p14,0,r1,c4,c1,0\n" /* enable interrupts */ -+ : : : "r1"); -+ -+ local_irq_restore(flags); -+} -+ -+static void pmu_timer_init(void) -+{ -+ u32 controlRegisterMask = -+ BIT(0) | /* enable counters */ -+ BIT(2); /* reset clock counter; */ -+ -+ /* -+ * Compute the number of xscale cycles needed between each -+ * PMU IRQ. This is done from the result of an OS calibration loop. -+ * -+ * For 533MHz CPU, 533000000 tick/s / 4000 times/sec = 138250 -+ * 4000 times/sec = 37 mbufs/interrupt at line rate -+ * The pmu timer is reset to -138250 = 0xfffde3f6, to trigger an IRQ -+ * when this up counter overflows. -+ * -+ * The multiplication gives a number of instructions per second. -+ * which is close to the processor frequency, and then close to the -+ * PMU clock rate. -+ * -+ * 2 is the number of instructions per loop -+ * -+ */ -+ -+ timer_countup_ticks = - ((loops_per_jiffy * HZ * 2) / poll_freq); -+ -+ /* enable the CCNT (clock count) timer from the PMU */ -+ __asm__(" mcr p14,0,%0,c0,c1,0\n" -+ : : "r" (controlRegisterMask)); -+} -+ -+static void pmu_timer_disable(void) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ __asm__(" mrc p14,0,r1,c4,c1,0; " /* get int enable register */ -+ " and r1,r1,#0x1e; " -+ " mcr p14,0,r1,c4,c1,0\n" /* disable interrupts */ -+ : : : "r1"); -+ local_irq_restore(flags); -+} -+ -+void queue_set_watermarks(struct qm_queue *queue, unsigned ne, unsigned nf) -+{ -+ u32 val; -+ /* calculate the register values -+ * 0->0, 1->1, 2->2, 4->3, 8->4 16->5...*/ -+ ne = _log2(ne<<1) & 0x7; -+ nf = _log2(nf<<1) & 0x7; -+ -+ /* Mask out old watermarks */ -+ val = queue_read_cfg_reg(queue) & ~0xfc000000; -+ queue_write_cfg_reg(queue, val | (ne << 26) | (nf << 29)); -+} -+ -+int queue_set_irq_src(struct qm_queue *queue, int flag) -+{ -+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); -+ u32 reg; -+ int offs, bitoffs; -+ -+ /* Q 0-7 are in REG0, 8-15 are in REG1, etc. They occupy 4 bits/Q */ -+ offs = queue->id/8 + INT0_SRC_SELREG0; -+ bitoffs = (queue->id % 8)*4; -+ -+ reg = *(qmgr->addr + offs) & ~(0xf << bitoffs); -+ *(qmgr->addr + offs) = reg | (flag << bitoffs); -+ -+ return 0; -+} -+ -+static irqreturn_t irq_qm1(int irq, void *dev_id) -+{ -+ struct qm_qmgr *qmgr = dev_id; -+ int offs, reg; -+ struct qm_queue *queue; -+ -+ if (poll_enable) -+ pmu_timer_restart(); -+ -+ reg = *(qmgr->addr + QUE_INT_REG0); -+ while(reg) { -+ /* -+ * count leading zeros. "offs" gets -+ * the amount of leading 0 in "reg" -+ */ -+ asm ("clz %0, %1;" : "=r"(offs) : "r"(reg)); -+ offs = 31 - offs; -+ reg &= ~(1 << offs); -+ queue = qmgr->queues[offs]; -+ if (likely(queue)) { -+ if (likely(queue->irq_cb)) { -+ queue->irq_cb(queue); -+ } else { -+ printk(KERN_ERR "Missing callback for Q %d\n", -+ offs); -+ } -+ } else { -+ printk(KERN_ERR "IRQ for unregistered Q %d\n", offs); -+ } -+ } -+ return IRQ_HANDLED; -+} -+ -+struct qm_queue *request_queue(int qid, int len) -+{ -+ int ram; -+ struct qm_qmgr *qmgr; -+ struct qm_queue *queue; -+ -+ if (!qmgr_dev) -+ return ERR_PTR(-ENODEV); -+ -+ if ((qid < 0) || (qid > MAX_QUEUES)) -+ return ERR_PTR(-ERANGE); -+ -+ switch (len) { -+ case 16: -+ case 32: -+ case 64: -+ case 128: break; -+ default : return ERR_PTR(-EINVAL); -+ } -+ -+ qmgr = dev_get_drvdata(qmgr_dev); -+ -+ if (qmgr->queues[qid]) { -+ /* not an error, just in use already */ -+ return NULL; -+ } -+ if ((ram = get_free_qspace(qmgr, len)) < 0) { -+ printk(KERN_ERR "No free SRAM space for this queue\n"); -+ return ERR_PTR(-ENOMEM); -+ } -+ if (!(queue = kzalloc(sizeof(struct qm_queue), GFP_KERNEL))) -+ return ERR_PTR(-ENOMEM); -+ -+ if (!try_module_get(THIS_MODULE)) { -+ kfree(queue); -+ return ERR_PTR(-ENODEV); -+ } -+ -+ queue->addr = ram; -+ queue->len = len; -+ queue->id = qid; -+ queue->dev = get_device(qmgr_dev); -+ queue->acc_reg = qmgr->addr + (4 * qid); -+ qmgr->queues[qid] = queue; -+ if (request_pool(qmgr_dev, len)) { -+ printk(KERN_ERR "Failed to request DMA pool of Q %d\n", qid); -+ } -+ -+ conf_q_regs(queue); -+ return queue; -+} -+ -+void release_queue(struct qm_queue *queue) -+{ -+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); -+ -+ BUG_ON(qmgr->queues[queue->id] != queue); -+ qmgr->queues[queue->id] = NULL; -+ -+ if (free_pool(queue->dev, queue->len)) { -+ printk(KERN_ERR "Failed to release DMA pool of Q %d\n", -+ queue->id); -+ } -+ queue_disable_irq(queue); -+ queue_write_cfg_reg(queue, 0); -+ -+ module_put(THIS_MODULE); -+ put_device(queue->dev); -+ kfree(queue); -+} -+ -+ -+ -+ -+static int qmgr_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ struct qm_qmgr *qmgr; -+ int size, ret=0, i; -+ -+ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0))) -+ return -EIO; -+ -+ if ((i = platform_get_irq(pdev, 0)) < 0) -+ return -EIO; -+ -+ if (!(qmgr = kzalloc(sizeof(struct qm_qmgr), GFP_KERNEL))) -+ return -ENOMEM; -+ -+ qmgr->irq = i; -+ size = res->end - res->start +1; -+ qmgr->res = request_mem_region(res->start, size, "ixp_qmgr"); -+ if (!qmgr->res) { -+ ret = -EBUSY; -+ goto out_free; -+ } -+ -+ qmgr->addr = ioremap(res->start, size); -+ if (!qmgr->addr) { -+ ret = -ENOMEM; -+ goto out_rel; -+ } -+ -+ /* Reset Q registers */ -+ for (i=0; i<4; i++) -+ *(qmgr->addr + QUE_LOW_STAT0 +i) = 0x33333333; -+ for (i=0; i<10; i++) -+ *(qmgr->addr + QUE_UO_STAT0 +i) = 0x0; -+ for (i=0; i<4; i++) -+ *(qmgr->addr + INT0_SRC_SELREG0 +i) = 0x0; -+ for (i=0; i<2; i++) { -+ *(qmgr->addr + QUE_IE_REG0 +i) = 0x00; -+ *(qmgr->addr + QUE_INT_REG0 +i) = 0xffffffff; -+ } -+ for (i=0; i<64; i++) { -+ *(qmgr->addr + IX_QMGR_QCFG_BASE + i) = 0x0; -+ } -+ -+ if (poll_enable) { -+ pmu_timer_init(); -+ qmgr->irq = IRQ_IXP4XX_XSCALE_PMU; -+ } -+ ret = request_irq(qmgr->irq, irq_qm1, SA_SHIRQ | SA_INTERRUPT, -+ "qmgr", qmgr); -+ if (ret) { -+ printk(KERN_ERR "Failed to request IRQ(%d)\n", qmgr->irq); -+ ret = -EIO; -+ goto out_rel; -+ } -+ if (poll_enable) -+ pmu_timer_restart(); -+ -+ rwlock_init(&qmgr->lock); -+ qmgr->dmapool = dma_pool_create("qmgr", &pdev->dev, -+ sizeof(struct npe_cont), 32, 0); -+ platform_set_drvdata(pdev, qmgr); -+ -+ qmgr_dev = &pdev->dev; -+ -+ printk(KERN_INFO IXQMGR_VERSION " initialized.\n"); -+ -+ return 0; -+ -+out_rel: -+ release_resource(qmgr->res); -+out_free: -+ kfree(qmgr); -+ return ret; -+} -+ -+static int qmgr_remove(struct platform_device *pdev) -+{ -+ struct qm_qmgr *qmgr = platform_get_drvdata(pdev); -+ int i; -+ -+ for (i=0; i<MAX_QUEUES; i++) { -+ if (qmgr->queues[i]) { -+ printk(KERN_ERR "WARNING Unreleased Q: %d\n", i); -+ release_queue(qmgr->queues[i]); -+ } -+ } -+ -+ if (poll_enable) -+ pmu_timer_disable(); -+ -+ synchronize_irq (qmgr->irq); -+ free_irq(qmgr->irq, qmgr); -+ -+ dma_pool_destroy(qmgr->dmapool); -+ iounmap(qmgr->addr); -+ release_resource(qmgr->res); -+ platform_set_drvdata(pdev, NULL); -+ qmgr_dev = NULL; -+ kfree(qmgr); -+ return 0; -+} -+ -+static struct platform_driver ixp4xx_qmgr = { -+ .driver.name = "ixp4xx_qmgr", -+ .probe = qmgr_probe, -+ .remove = qmgr_remove, -+}; -+ -+ -+static int __init init_qmgr(void) -+{ -+ return platform_driver_register(&ixp4xx_qmgr); -+} -+ -+static void __exit finish_qmgr(void) -+{ -+ platform_driver_unregister(&ixp4xx_qmgr); -+} -+ -+module_init(init_qmgr); -+module_exit(finish_qmgr); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>"); -+ -+EXPORT_SYMBOL(request_queue); -+EXPORT_SYMBOL(release_queue); -+EXPORT_SYMBOL(queue_set_irq_src); -+EXPORT_SYMBOL(queue_set_watermarks); -+EXPORT_SYMBOL(queue_len); -Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac.h 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,275 @@ -+/* -+ * Copyright (C) 2002-2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+#include <linux/resource.h> -+#include <linux/netdevice.h> -+#include <linux/io.h> -+#include <linux/mii.h> -+#include <linux/workqueue.h> -+#include <asm/hardware.h> -+#include <linux/ixp_qmgr.h> -+ -+/* 32 bit offsets to be added to u32 *pointers */ -+#define MAC_TX_CNTRL1 0x00 // 0x000 -+#define MAC_TX_CNTRL2 0x01 // 0x004 -+#define MAC_RX_CNTRL1 0x04 // 0x010 -+#define MAC_RX_CNTRL2 0x05 // 0x014 -+#define MAC_RANDOM_SEED 0x08 // 0x020 -+#define MAC_THRESH_P_EMPTY 0x0c // 0x030 -+#define MAC_THRESH_P_FULL 0x0e // 0x038 -+#define MAC_BUF_SIZE_TX 0x10 // 0x040 -+#define MAC_TX_DEFER 0x14 // 0x050 -+#define MAC_RX_DEFER 0x15 // 0x054 -+#define MAC_TX_TWO_DEFER_1 0x18 // 0x060 -+#define MAC_TX_TWO_DEFER_2 0x19 // 0x064 -+#define MAC_SLOT_TIME 0x1c // 0x070 -+#define MAC_MDIO_CMD 0x20 // 0x080 4 registers 0x20 - 0x23 -+#define MAC_MDIO_STS 0x24 // 0x090 4 registers 0x24 - 0x27 -+#define MAC_ADDR_MASK 0x28 // 0x0A0 6 registers 0x28 - 0x2d -+#define MAC_ADDR 0x30 // 0x0C0 6 registers 0x30 - 0x35 -+#define MAC_INT_CLK_THRESH 0x38 // 0x0E0 1 register -+#define MAC_UNI_ADDR 0x3c // 0x0F0 6 registers 0x3c - 0x41 -+#define MAC_CORE_CNTRL 0x7f // 0x1fC -+ -+/* TX Control Register 1*/ -+ -+#define TX_CNTRL1_TX_EN BIT(0) -+#define TX_CNTRL1_DUPLEX BIT(1) -+#define TX_CNTRL1_RETRY BIT(2) -+#define TX_CNTRL1_PAD_EN BIT(3) -+#define TX_CNTRL1_FCS_EN BIT(4) -+#define TX_CNTRL1_2DEFER BIT(5) -+#define TX_CNTRL1_RMII BIT(6) -+ -+/* TX Control Register 2 */ -+#define TX_CNTRL2_RETRIES_MASK 0xf -+ -+/* RX Control Register 1 */ -+#define RX_CNTRL1_RX_EN BIT(0) -+#define RX_CNTRL1_PADSTRIP_EN BIT(1) -+#define RX_CNTRL1_CRC_EN BIT(2) -+#define RX_CNTRL1_PAUSE_EN BIT(3) -+#define RX_CNTRL1_LOOP_EN BIT(4) -+#define RX_CNTRL1_ADDR_FLTR_EN BIT(5) -+#define RX_CNTRL1_RX_RUNT_EN BIT(6) -+#define RX_CNTRL1_BCAST_DIS BIT(7) -+ -+/* RX Control Register 2 */ -+#define RX_CNTRL2_DEFER_EN BIT(0) -+ -+/* Core Control Register */ -+#define CORE_RESET BIT(0) -+#define CORE_RX_FIFO_FLUSH BIT(1) -+#define CORE_TX_FIFO_FLUSH BIT(2) -+#define CORE_SEND_JAM BIT(3) -+#define CORE_MDC_EN BIT(4) -+ -+/* Definitions for MII access routines*/ -+ -+#define MII_REG_SHL 16 -+#define MII_ADDR_SHL 21 -+ -+#define MII_GO BIT(31) -+#define MII_WRITE BIT(26) -+#define MII_READ_FAIL BIT(31) -+ -+#define MII_TIMEOUT_10TH_SECS 5 -+#define MII_10TH_SEC_IN_MILLIS 100 -+ -+/* -+ * -+ * Default values -+ * -+ */ -+ -+#define MAC_DEF_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) -+ -+#define MAC_TX_CNTRL1_DEFAULT (\ -+ TX_CNTRL1_TX_EN | \ -+ TX_CNTRL1_RETRY | \ -+ TX_CNTRL1_FCS_EN | \ -+ TX_CNTRL1_2DEFER | \ -+ TX_CNTRL1_PAD_EN ) -+ -+#define MAC_TX_MAX_RETRIES_DEFAULT 0x0f -+ -+#define MAC_RX_CNTRL1_DEFAULT ( \ -+ RX_CNTRL1_PADSTRIP_EN | \ -+ RX_CNTRL1_CRC_EN | \ -+ RX_CNTRL1_RX_EN ) -+ -+#define MAC_RX_CNTRL2_DEFAULT 0x0 -+#define MAC_TX_CNTRL2_DEFAULT TX_CNTRL2_RETRIES_MASK -+ -+/* Thresholds determined by NPE firmware FS */ -+#define MAC_THRESH_P_EMPTY_DEFAULT 0x12 -+#define MAC_THRESH_P_FULL_DEFAULT 0x30 -+ -+/* Number of bytes that must be in the tx fifo before -+ * transmission commences */ -+#define MAC_BUF_SIZE_TX_DEFAULT 0x8 -+ -+/* One-part deferral values */ -+#define MAC_TX_DEFER_DEFAULT 0x15 -+#define MAC_RX_DEFER_DEFAULT 0x16 -+ -+/* Two-part deferral values... */ -+#define MAC_TX_TWO_DEFER_1_DEFAULT 0x08 -+#define MAC_TX_TWO_DEFER_2_DEFAULT 0x07 -+ -+/* This value applies to MII */ -+#define MAC_SLOT_TIME_DEFAULT 0x80 -+ -+/* This value applies to RMII */ -+#define MAC_SLOT_TIME_RMII_DEFAULT 0xFF -+ -+#define MAC_ADDR_MASK_DEFAULT 0xFF -+ -+#define MAC_INT_CLK_THRESH_DEFAULT 0x1 -+/* The following is a value chosen at random */ -+#define MAC_RANDOM_SEED_DEFAULT 0x8 -+ -+/* By default we must configure the MAC to generate the MDC clock*/ -+#define CORE_DEFAULT (CORE_MDC_EN) -+ -+/* End of Intel provided register information */ -+ -+extern int -+mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg); -+extern void -+mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val); -+extern void init_mdio(struct net_device *dev, int phy_id); -+ -+struct mac_info { -+ u32 __iomem *addr; -+ struct resource *res; -+ struct device *npe_dev; -+ struct net_device *netdev; -+ struct qm_qmgr *qmgr; -+ struct qm_queue *rxq; -+ struct qm_queue *txq; -+ struct qm_queue *rxdoneq; -+ u32 irqflags; -+ struct net_device_stats stat; -+ struct mii_if_info mii; -+ struct delayed_work mdio_thread; -+ int rxq_pkt; -+ int txq_pkt; -+ int unloading; -+ struct mac_plat_info *plat; -+ int npe_stat_num; -+ spinlock_t rx_lock; -+ u32 msg_enable; -+}; -+ -+static inline void mac_write_reg(struct mac_info *mac, int offset, u32 val) -+{ -+ *(mac->addr + offset) = val; -+} -+static inline u32 mac_read_reg(struct mac_info *mac, int offset) -+{ -+ return *(mac->addr + offset); -+} -+static inline void mac_set_regbit(struct mac_info *mac, int offset, u32 bit) -+{ -+ mac_write_reg(mac, offset, mac_read_reg(mac, offset) | bit); -+} -+static inline void mac_reset_regbit(struct mac_info *mac, int offset, u32 bit) -+{ -+ mac_write_reg(mac, offset, mac_read_reg(mac, offset) & ~bit); -+} -+ -+static inline void mac_mdio_cmd_write(struct mac_info *mac, u32 cmd) -+{ -+ int i; -+ for(i=0; i<4; i++) { -+ mac_write_reg(mac, MAC_MDIO_CMD + i, cmd & 0xff); -+ cmd >>=8; -+ } -+} -+ -+#define mac_mdio_cmd_read(mac) mac_mdio_read((mac), MAC_MDIO_CMD) -+#define mac_mdio_status_read(mac) mac_mdio_read((mac), MAC_MDIO_STS) -+static inline u32 mac_mdio_read(struct mac_info *mac, int offset) -+{ -+ int i; -+ u32 data = 0; -+ for(i=0; i<4; i++) { -+ data |= (mac_read_reg(mac, offset + i) & 0xff) << (i*8); -+ } -+ return data; -+} -+ -+static inline u32 mdio_cmd(int phy_addr, int phy_reg) -+{ -+ return phy_addr << MII_ADDR_SHL | -+ phy_reg << MII_REG_SHL | -+ MII_GO; -+} -+ -+#define MAC_REG_LIST { \ -+ MAC_TX_CNTRL1, MAC_TX_CNTRL2, \ -+ MAC_RX_CNTRL1, MAC_RX_CNTRL2, \ -+ MAC_RANDOM_SEED, MAC_THRESH_P_EMPTY, MAC_THRESH_P_FULL, \ -+ MAC_BUF_SIZE_TX, MAC_TX_DEFER, MAC_RX_DEFER, \ -+ MAC_TX_TWO_DEFER_1, MAC_TX_TWO_DEFER_2, MAC_SLOT_TIME, \ -+ MAC_ADDR_MASK +0, MAC_ADDR_MASK +1, MAC_ADDR_MASK +2, \ -+ MAC_ADDR_MASK +3, MAC_ADDR_MASK +4, MAC_ADDR_MASK +5, \ -+ MAC_ADDR +0, MAC_ADDR +1, MAC_ADDR +2, \ -+ MAC_ADDR +3, MAC_ADDR +4, MAC_ADDR +5, \ -+ MAC_INT_CLK_THRESH, \ -+ MAC_UNI_ADDR +0, MAC_UNI_ADDR +1, MAC_UNI_ADDR +2, \ -+ MAC_UNI_ADDR +3, MAC_UNI_ADDR +4, MAC_UNI_ADDR +5, \ -+ MAC_CORE_CNTRL \ -+} -+ -+#define NPE_STAT_NUM 34 -+#define NPE_STAT_NUM_BASE 22 -+#define NPE_Q_STAT_NUM 4 -+ -+#define NPE_Q_STAT_STRINGS \ -+ {"RX ready to use queue len "}, \ -+ {"RX received queue len "}, \ -+ {"TX to be send queue len "}, \ -+ {"TX done queue len "}, -+ -+#define NPE_STAT_STRINGS \ -+ {"StatsAlignmentErrors "}, \ -+ {"StatsFCSErrors "}, \ -+ {"StatsInternalMacReceiveErrors "}, \ -+ {"RxOverrunDiscards "}, \ -+ {"RxLearnedEntryDiscards "}, \ -+ {"RxLargeFramesDiscards "}, \ -+ {"RxSTPBlockedDiscards "}, \ -+ {"RxVLANTypeFilterDiscards "}, \ -+ {"RxVLANIdFilterDiscards "}, \ -+ {"RxInvalidSourceDiscards "}, \ -+ {"RxBlackListDiscards "}, \ -+ {"RxWhiteListDiscards "}, \ -+ {"RxUnderflowEntryDiscards "}, \ -+ {"StatsSingleCollisionFrames "}, \ -+ {"StatsMultipleCollisionFrames "}, \ -+ {"StatsDeferredTransmissions "}, \ -+ {"StatsLateCollisions "}, \ -+ {"StatsExcessiveCollsions "}, \ -+ {"StatsInternalMacTransmitErrors"}, \ -+ {"StatsCarrierSenseErrors "}, \ -+ {"TxLargeFrameDiscards "}, \ -+ {"TxVLANIdFilterDiscards "}, \ -+\ -+ {"RxValidFramesTotalOctets "}, \ -+ {"RxUcastPkts "}, \ -+ {"RxBcastPkts "}, \ -+ {"RxMcastPkts "}, \ -+ {"RxPkts64Octets "}, \ -+ {"RxPkts65to127Octets "}, \ -+ {"RxPkts128to255Octets "}, \ -+ {"RxPkts256to511Octets "}, \ -+ {"RxPkts512to1023Octets "}, \ -+ {"RxPkts1024to1518Octets "}, \ -+ {"RxInternalNPEReceiveErrors "}, \ -+ {"TxInternalNPETransmitErrors "} -+ -Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac_driver.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/mac_driver.c 2007-02-21 02:24:46.000000000 -0800 -@@ -0,0 +1,850 @@ -+/* -+ * mac_driver.c - provide a network interface for each MAC -+ * -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/netdevice.h> -+#include <linux/etherdevice.h> -+#include <linux/ethtool.h> -+#include <linux/slab.h> -+#include <linux/delay.h> -+#include <linux/err.h> -+#include <linux/dma-mapping.h> -+#include <linux/workqueue.h> -+#include <asm/io.h> -+#include <asm/irq.h> -+ -+ -+#include <linux/ixp_qmgr.h> -+#include <linux/ixp_npe.h> -+#include "mac.h" -+ -+#define MDIO_INTERVAL (3*HZ) -+#define RX_QUEUE_PREFILL 64 -+#define TX_QUEUE_PREFILL 16 -+ -+#define IXMAC_NAME "ixp4xx_mac" -+#define IXMAC_VERSION "0.3.1" -+ -+#define MAC_DEFAULT_REG(mac, name) \ -+ mac_write_reg(mac, MAC_ ## name, MAC_ ## name ## _DEFAULT) -+ -+#define TX_DONE_QID 31 -+ -+#define DMA_ALLOC_SIZE 2048 -+#define DMA_HDR_SIZE (sizeof(struct npe_cont)) -+#define DMA_BUF_SIZE (DMA_ALLOC_SIZE - DMA_HDR_SIZE) -+ -+/* Since the NPEs use 1 Return Q for sent frames, we need a device -+ * independent return Q. We call it tx_doneq. -+ * It will be initialized during module load and uninitialized -+ * during module unload. Evil hack, but there is no choice :-( -+ */ -+ -+static struct qm_queue *tx_doneq = NULL; -+static int debug = -1; -+module_param(debug, int, 0); -+ -+static int init_buffer(struct qm_queue *queue, int count) -+{ -+ int i; -+ struct npe_cont *cont; -+ -+ for (i=0; i<count; i++) { -+ cont = kmalloc(DMA_ALLOC_SIZE, GFP_KERNEL | GFP_DMA); -+ if (!cont) -+ goto err; -+ -+ cont->phys = dma_map_single(queue->dev, cont, DMA_ALLOC_SIZE, -+ DMA_BIDIRECTIONAL); -+ if (dma_mapping_error(cont->phys)) -+ goto err; -+ -+ cont->data = cont+1; -+ /* now the buffer is on a 32 bit boundary. -+ * we add 2 bytes for good alignment to SKB */ -+ cont->data+=2; -+ cont->eth.next = 0; -+ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE); -+ cont->eth.pkt_len = 0; -+ /* also add 2 alignment bytes from cont->data*/ -+ cont->eth.phys_addr = cpu_to_npe32(cont->phys+ DMA_HDR_SIZE+ 2); -+ -+ dma_sync_single(queue->dev, cont->phys, DMA_HDR_SIZE, -+ DMA_TO_DEVICE); -+ -+ queue_put_entry(queue, cont->phys); -+ if (queue_stat(queue) == 2) { /* overflow */ -+ dma_unmap_single(queue->dev, cont->phys, DMA_ALLOC_SIZE, -+ DMA_BIDIRECTIONAL); -+ goto err; -+ } -+ } -+ return i; -+err: -+ if (cont) -+ kfree(cont); -+ return i; -+} -+ -+static int destroy_buffer(struct qm_queue *queue, int count) -+{ -+ u32 phys; -+ int i; -+ struct npe_cont *cont; -+ -+ for (i=0; i<count; i++) { -+ phys = queue_get_entry(queue) & ~0xf; -+ if (!phys) -+ break; -+ dma_unmap_single(queue->dev, phys, DMA_ALLOC_SIZE, -+ DMA_BIDIRECTIONAL); -+ cont = dma_to_virt(queue->dev, phys); -+ kfree(cont); -+ } -+ return i; -+} -+ -+static void mac_init(struct mac_info *mac) -+{ -+ MAC_DEFAULT_REG(mac, TX_CNTRL2); -+ MAC_DEFAULT_REG(mac, RANDOM_SEED); -+ MAC_DEFAULT_REG(mac, THRESH_P_EMPTY); -+ MAC_DEFAULT_REG(mac, THRESH_P_FULL); -+ MAC_DEFAULT_REG(mac, TX_DEFER); -+ MAC_DEFAULT_REG(mac, TX_TWO_DEFER_1); -+ MAC_DEFAULT_REG(mac, TX_TWO_DEFER_2); -+ MAC_DEFAULT_REG(mac, SLOT_TIME); -+ MAC_DEFAULT_REG(mac, INT_CLK_THRESH); -+ MAC_DEFAULT_REG(mac, BUF_SIZE_TX); -+ MAC_DEFAULT_REG(mac, TX_CNTRL1); -+ MAC_DEFAULT_REG(mac, RX_CNTRL1); -+} -+ -+static void mac_set_uniaddr(struct net_device *dev) -+{ -+ int i; -+ struct mac_info *mac = netdev_priv(dev); -+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev); -+ -+ /* check for multicast */ -+ if (dev->dev_addr[0] & 1) -+ return; -+ -+ npe_mh_setportaddr(npe, mac->plat, dev->dev_addr); -+ npe_mh_disable_firewall(npe, mac->plat); -+ for (i=0; i<dev->addr_len; i++) -+ mac_write_reg(mac, MAC_UNI_ADDR + i, dev->dev_addr[i]); -+} -+ -+static void update_duplex_mode(struct net_device *dev) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ if (netif_msg_link(mac)) { -+ printk(KERN_DEBUG "Link of %s is %s-duplex\n", dev->name, -+ mac->mii.full_duplex ? "full" : "half"); -+ } -+ if (mac->mii.full_duplex) { -+ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX); -+ } else { -+ mac_set_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX); -+ } -+} -+ -+static int media_check(struct net_device *dev, int init) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ -+ if (mii_check_media(&mac->mii, netif_msg_link(mac), init)) { -+ update_duplex_mode(dev); -+ return 1; -+ } -+ return 0; -+} -+ -+static void get_npe_stats(struct mac_info *mac, u32 *buf, int len, int reset) -+{ -+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev); -+ u32 phys; -+ -+ memset(buf, len, 0); -+ phys = dma_map_single(mac->npe_dev, buf, len, DMA_BIDIRECTIONAL); -+ npe_mh_get_stats(npe, mac->plat, phys, reset); -+ dma_unmap_single(mac->npe_dev, phys, len, DMA_BIDIRECTIONAL); -+} -+ -+static void irqcb_recv(struct qm_queue *queue) -+{ -+ struct net_device *dev = queue->cb_data; -+ -+ queue_ack_irq(queue); -+ queue_disable_irq(queue); -+ if (netif_running(dev)) -+ netif_rx_schedule(dev); -+} -+ -+int ix_recv(struct net_device *dev, int *budget, struct qm_queue *queue) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ struct sk_buff *skb; -+ u32 phys; -+ struct npe_cont *cont; -+ -+ while (*budget > 0 && netif_running(dev) ) { -+ int len; -+ phys = queue_get_entry(queue) & ~0xf; -+ if (!phys) -+ break; -+ dma_sync_single(queue->dev, phys, DMA_HDR_SIZE, -+ DMA_FROM_DEVICE); -+ cont = dma_to_virt(queue->dev, phys); -+ len = npe_to_cpu16(cont->eth.pkt_len) -4; /* strip FCS */ -+ -+ if (unlikely(netif_msg_rx_status(mac))) { -+ printk(KERN_DEBUG "%s: RX packet size: %u\n", -+ dev->name, len); -+ queue_state(mac->rxq); -+ queue_state(mac->rxdoneq); -+ } -+ skb = dev_alloc_skb(len + 2); -+ if (likely(skb)) { -+ skb->dev = dev; -+ skb_reserve(skb, 2); -+ dma_sync_single(queue->dev, cont->eth.phys_addr, len, -+ DMA_FROM_DEVICE); -+#ifdef CONFIG_NPE_ADDRESS_COHERENT -+ /* swap the payload of the SKB */ -+ { -+ u32 *t = (u32*)(skb->data-2); -+ u32 *s = (u32*)(cont->data-2); -+ int i, j = (len+5)/4; -+ for (i=0; i<j; i++) -+ t[i] = cpu_to_be32(s[i]); -+ } -+#else -+ eth_copy_and_sum(skb, cont->data, len, 0); -+#endif -+ skb_put(skb, len); -+ skb->protocol = eth_type_trans(skb, dev); -+ dev->last_rx = jiffies; -+ netif_receive_skb(skb); -+ mac->stat.rx_packets++; -+ mac->stat.rx_bytes += skb->len; -+ } else { -+ mac->stat.rx_dropped++; -+ } -+ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE); -+ cont->eth.pkt_len = 0; -+ dma_sync_single(queue->dev, phys, DMA_HDR_SIZE, DMA_TO_DEVICE); -+ queue_put_entry(mac->rxq, phys); -+ dev->quota--; -+ (*budget)--; -+ } -+ -+ return !budget; -+} -+ -+static int ix_poll(struct net_device *dev, int *budget) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ struct qm_queue *queue = mac->rxdoneq; -+ -+ for (;;) { -+ if (ix_recv(dev, budget, queue)) -+ return 1; -+ netif_rx_complete(dev); -+ queue_enable_irq(queue); -+ if (!queue_len(queue)) -+ break; -+ queue_disable_irq(queue); -+ if (netif_rx_reschedule(dev, 0)) -+ break; -+ } -+ return 0; -+} -+ -+static void ixmac_set_rx_mode (struct net_device *dev) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ struct dev_mc_list *mclist; -+ u8 aset[dev->addr_len], aclear[dev->addr_len]; -+ int i,j; -+ -+ if (dev->flags & IFF_PROMISC) { -+ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_ADDR_FLTR_EN); -+ } else { -+ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_ADDR_FLTR_EN); -+ -+ mclist = dev->mc_list; -+ memset(aset, 0xff, dev->addr_len); -+ memset(aclear, 0x00, dev->addr_len); -+ for (i = 0; mclist && i < dev->mc_count; i++) { -+ for (j=0; j< dev->addr_len; j++) { -+ aset[j] &= mclist->dmi_addr[j]; -+ aclear[j] |= mclist->dmi_addr[j]; -+ } -+ mclist = mclist->next; -+ } -+ for (j=0; j< dev->addr_len; j++) { -+ aclear[j] = aset[j] | ~aclear[j]; -+ } -+ for (i=0; i<dev->addr_len; i++) { -+ mac_write_reg(mac, MAC_ADDR + i, aset[i]); -+ mac_write_reg(mac, MAC_ADDR_MASK + i, aclear[i]); -+ } -+ } -+} -+ -+static int ixmac_open (struct net_device *dev) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev); -+ u32 buf[NPE_STAT_NUM]; -+ int i; -+ u32 phys; -+ -+ /* first check if the NPE is up and running */ -+ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) { -+ printk(KERN_ERR "%s: %s not running\n", dev->name, -+ npe->plat->name); -+ return -EIO; -+ } -+ if (npe_mh_status(npe)) { -+ printk(KERN_ERR "%s: %s not responding\n", dev->name, -+ npe->plat->name); -+ return -EIO; -+ } -+ mac->txq_pkt += init_buffer(mac->txq, TX_QUEUE_PREFILL - mac->txq_pkt); -+ mac->rxq_pkt += init_buffer(mac->rxq, RX_QUEUE_PREFILL - mac->rxq_pkt); -+ -+ queue_enable_irq(mac->rxdoneq); -+ -+ /* drain all buffers from then RX-done-q to make the IRQ happen */ -+ while ((phys = queue_get_entry(mac->rxdoneq) & ~0xf)) { -+ struct npe_cont *cont; -+ cont = dma_to_virt(mac->rxdoneq->dev, phys); -+ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE); -+ cont->eth.pkt_len = 0; -+ dma_sync_single(mac->rxdoneq->dev, phys, DMA_HDR_SIZE, -+ DMA_TO_DEVICE); -+ queue_put_entry(mac->rxq, phys); -+ } -+ mac_init(mac); -+ npe_mh_set_rxqid(npe, mac->plat, mac->plat->rxdoneq_id); -+ get_npe_stats(mac, buf, sizeof(buf), 1); /* reset stats */ -+ get_npe_stats(mac, buf, sizeof(buf), 0); -+ /* -+ * if the extended stats contain random values -+ * the NPE image lacks extendet statistic counters -+ */ -+ for (i=NPE_STAT_NUM_BASE; i<NPE_STAT_NUM; i++) { -+ if (buf[i] >10000) -+ break; -+ } -+ mac->npe_stat_num = i<NPE_STAT_NUM ? NPE_STAT_NUM_BASE : NPE_STAT_NUM; -+ mac->npe_stat_num += NPE_Q_STAT_NUM; -+ -+ mac_set_uniaddr(dev); -+ media_check(dev, 1); -+ ixmac_set_rx_mode(dev); -+ netif_start_queue(dev); -+ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL); -+ if (netif_msg_ifup(mac)) { -+ printk(KERN_DEBUG "%s: open " IXMAC_NAME -+ " RX queue %d bufs, TX queue %d bufs\n", -+ dev->name, mac->rxq_pkt, mac->txq_pkt); -+ } -+ return 0; -+} -+ -+static int ixmac_start_xmit (struct sk_buff *skb, struct net_device *dev) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ struct npe_cont *cont; -+ u32 phys; -+ struct qm_queue *queue = mac->txq; -+ -+ if (unlikely(skb->len > DMA_BUF_SIZE)) { -+ dev_kfree_skb(skb); -+ mac->stat.tx_errors++; -+ return NETDEV_TX_OK; -+ } -+ phys = queue_get_entry(tx_doneq) & ~0xf; -+ if (!phys) -+ goto busy; -+ cont = dma_to_virt(queue->dev, phys); -+#ifdef CONFIG_NPE_ADDRESS_COHERENT -+ /* swap the payload of the SKB */ -+ { -+ u32 *s = (u32*)(skb->data-2); -+ u32 *t = (u32*)(cont->data-2); -+ int i,j = (skb->len+5) / 4; -+ for (i=0; i<j; i++) -+ t[i] = cpu_to_be32(s[i]); -+ } -+#else -+ //skb_copy_and_csum_dev(skb, cont->data); -+ memcpy(cont->data, skb->data, skb->len); -+#endif -+ cont->eth.buf_len = cpu_to_npe16(DMA_BUF_SIZE); -+ cont->eth.pkt_len = cpu_to_npe16(skb->len); -+ /* disable VLAN functions in NPE image for now */ -+ cont->eth.flags = 0; -+ dma_sync_single(queue->dev, phys, skb->len + DMA_HDR_SIZE, -+ DMA_TO_DEVICE); -+ queue_put_entry(queue, phys); -+ if (queue_stat(queue) == 2) { /* overflow */ -+ queue_put_entry(tx_doneq, phys); -+ goto busy; -+ } -+ dev_kfree_skb(skb); -+ -+ mac->stat.tx_packets++; -+ mac->stat.tx_bytes += skb->len; -+ dev->trans_start = jiffies; -+ if (netif_msg_tx_queued(mac)) { -+ printk(KERN_DEBUG "%s: TX packet size %u\n", -+ dev->name, skb->len); -+ queue_state(mac->txq); -+ queue_state(tx_doneq); -+ } -+ return NETDEV_TX_OK; -+busy: -+ return NETDEV_TX_BUSY; -+} -+ -+static int ixmac_close (struct net_device *dev) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ -+ netif_stop_queue (dev); -+ queue_disable_irq(mac->rxdoneq); -+ -+ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt); -+ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt); -+ -+ cancel_rearming_delayed_work(&(mac->mdio_thread)); -+ -+ if (netif_msg_ifdown(mac)) { -+ printk(KERN_DEBUG "%s: close " IXMAC_NAME -+ " RX queue %d bufs, TX queue %d bufs\n", -+ dev->name, mac->rxq_pkt, mac->txq_pkt); -+ } -+ return 0; -+} -+ -+static int ixmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ int rc, duplex_changed; -+ -+ if (!netif_running(dev)) -+ return -EINVAL; -+ if (!try_module_get(THIS_MODULE)) -+ return -ENODEV; -+ rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed); -+ module_put(THIS_MODULE); -+ if (duplex_changed) -+ update_duplex_mode(dev); -+ return rc; -+} -+ -+static struct net_device_stats *ixmac_stats (struct net_device *dev) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ return &mac->stat; -+} -+ -+static void ixmac_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev); -+ -+ strcpy(info->driver, IXMAC_NAME); -+ strcpy(info->version, IXMAC_VERSION); -+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) { -+ snprintf(info->fw_version, 32, "%d.%d func [%d]", -+ npe->img_info[2], npe->img_info[3], npe->img_info[1]); -+ } -+ strncpy(info->bus_info, npe->plat->name, ETHTOOL_BUSINFO_LEN); -+} -+ -+static int ixmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ mii_ethtool_gset(&mac->mii, cmd); -+ return 0; -+} -+ -+static int ixmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ int rc; -+ rc = mii_ethtool_sset(&mac->mii, cmd); -+ return rc; -+} -+ -+static int ixmac_nway_reset(struct net_device *dev) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ return mii_nway_restart(&mac->mii); -+} -+ -+static u32 ixmac_get_link(struct net_device *dev) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ return mii_link_ok(&mac->mii); -+} -+ -+static const int mac_reg_list[] = MAC_REG_LIST; -+ -+static int ixmac_get_regs_len(struct net_device *dev) -+{ -+ return ARRAY_SIZE(mac_reg_list); -+} -+ -+static void -+ixmac_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) -+{ -+ int i; -+ struct mac_info *mac = netdev_priv(dev); -+ u8 *buf = regbuf; -+ -+ for (i=0; i<regs->len; i++) { -+ buf[i] = mac_read_reg(mac, mac_reg_list[i]); -+ } -+} -+ -+static struct { -+ const char str[ETH_GSTRING_LEN]; -+} ethtool_stats_keys[NPE_STAT_NUM + NPE_Q_STAT_NUM] = { -+ NPE_Q_STAT_STRINGS -+ NPE_STAT_STRINGS -+}; -+ -+static void ixmac_get_strings(struct net_device *dev, u32 stringset, u8 *data) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ memcpy(data, ethtool_stats_keys, mac->npe_stat_num * ETH_GSTRING_LEN); -+} -+ -+static int ixmac_get_stats_count(struct net_device *dev) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ return mac->npe_stat_num; -+} -+ -+static u32 ixmac_get_msglevel(struct net_device *dev) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ return mac->msg_enable; -+} -+ -+static void ixmac_set_msglevel(struct net_device *dev, u32 datum) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ mac->msg_enable = datum; -+} -+ -+static void ixmac_get_ethtool_stats(struct net_device *dev, -+ struct ethtool_stats *stats, u64 *data) -+{ -+ int i; -+ struct mac_info *mac = netdev_priv(dev); -+ u32 buf[NPE_STAT_NUM]; -+ -+ data[0] = queue_len(mac->rxq); -+ data[1] = queue_len(mac->rxdoneq); -+ data[2] = queue_len(mac->txq); -+ data[3] = queue_len(tx_doneq); -+ -+ get_npe_stats(mac, buf, sizeof(buf), 0); -+ -+ for (i=0; i<stats->n_stats-4; i++) { -+ data[i+4] = npe_to_cpu32(buf[i]); -+ } -+} -+ -+static struct ethtool_ops ixmac_ethtool_ops = { -+ .get_drvinfo = ixmac_get_drvinfo, -+ .get_settings = ixmac_get_settings, -+ .set_settings = ixmac_set_settings, -+ .nway_reset = ixmac_nway_reset, -+ .get_link = ixmac_get_link, -+ .get_msglevel = ixmac_get_msglevel, -+ .set_msglevel = ixmac_set_msglevel, -+ .get_regs_len = ixmac_get_regs_len, -+ .get_regs = ixmac_get_regs, -+ .get_perm_addr = ethtool_op_get_perm_addr, -+ .get_strings = ixmac_get_strings, -+ .get_stats_count = ixmac_get_stats_count, -+ .get_ethtool_stats = ixmac_get_ethtool_stats, -+}; -+ -+static void mac_mdio_thread(struct work_struct *work) -+{ -+ struct mac_info *mac = container_of(work, struct mac_info, -+ mdio_thread.work); -+ struct net_device *dev = mac->netdev; -+ -+ media_check(dev, 0); -+ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL); -+} -+ -+static int mac_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ struct mac_info *mac; -+ struct net_device *dev; -+ struct npe_info *npe; -+ struct mac_plat_info *plat = pdev->dev.platform_data; -+ int size, ret; -+ -+ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0))) { -+ return -EIO; -+ } -+ if (!(dev = alloc_etherdev (sizeof(struct mac_info)))) { -+ return -ENOMEM; -+ } -+ SET_MODULE_OWNER(dev); -+ SET_NETDEV_DEV(dev, &pdev->dev); -+ mac = netdev_priv(dev); -+ mac->netdev = dev; -+ -+ size = res->end - res->start +1; -+ mac->res = request_mem_region(res->start, size, IXMAC_NAME); -+ if (!mac->res) { -+ ret = -EBUSY; -+ goto out_free; -+ } -+ -+ mac->addr = ioremap(res->start, size); -+ if (!mac->addr) { -+ ret = -ENOMEM; -+ goto out_rel; -+ } -+ -+ dev->open = ixmac_open; -+ dev->hard_start_xmit = ixmac_start_xmit; -+ dev->poll = ix_poll; -+ dev->stop = ixmac_close; -+ dev->get_stats = ixmac_stats; -+ dev->do_ioctl = ixmac_ioctl; -+ dev->set_multicast_list = ixmac_set_rx_mode; -+ dev->ethtool_ops = &ixmac_ethtool_ops; -+ -+ dev->weight = 16; -+ dev->tx_queue_len = 100; -+ -+ mac->npe_dev = get_npe_by_id(plat->npe_id); -+ if (!mac->npe_dev) { -+ ret = -EIO; -+ goto out_unmap; -+ } -+ npe = dev_get_drvdata(mac->npe_dev); -+ -+ mac->rxq = request_queue(plat->rxq_id, 128); -+ if (IS_ERR(mac->rxq)) { -+ printk(KERN_ERR "Error requesting Q: %d\n", plat->rxq_id); -+ ret = -EBUSY; -+ goto out_putmod; -+ } -+ mac->txq = request_queue(plat->txq_id, 128); -+ if (IS_ERR(mac->txq)) { -+ printk(KERN_ERR "Error requesting Q: %d\n", plat->txq_id); -+ ret = -EBUSY; -+ goto out_putmod; -+ } -+ mac->rxdoneq = request_queue(plat->rxdoneq_id, 128); -+ if (IS_ERR(mac->rxdoneq)) { -+ printk(KERN_ERR "Error requesting Q: %d\n", plat->rxdoneq_id); -+ ret = -EBUSY; -+ goto out_putmod; -+ } -+ mac->rxdoneq->irq_cb = irqcb_recv; -+ mac->rxdoneq->cb_data = dev; -+ queue_set_watermarks(mac->rxdoneq, 0, 0); -+ queue_set_irq_src(mac->rxdoneq, Q_IRQ_ID_NOT_E); -+ -+ mac->qmgr = dev_get_drvdata(mac->rxq->dev); -+ if (register_netdev (dev)) { -+ ret = -EIO; -+ goto out_putmod; -+ } -+ -+ mac->plat = plat; -+ mac->npe_stat_num = NPE_STAT_NUM_BASE; -+ mac->msg_enable = netif_msg_init(debug, MAC_DEF_MSG_ENABLE); -+ -+ platform_set_drvdata(pdev, dev); -+ -+ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_RESET); -+ udelay(500); -+ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_MDC_EN); -+ -+ init_mdio(dev, plat->phy_id); -+ -+ INIT_DELAYED_WORK(&mac->mdio_thread, mac_mdio_thread); -+ -+ /* The place of the MAC address is very system dependent. -+ * Here we use a random one to be replaced by one of the -+ * following commands: -+ * "ip link set address 02:03:04:04:04:01 dev eth0" -+ * "ifconfig eth0 hw ether 02:03:04:04:04:07" -+ */ -+ -+ if (is_zero_ether_addr(plat->hwaddr)) { -+ random_ether_addr(dev->dev_addr); -+ dev->dev_addr[5] = plat->phy_id; -+ } -+ else -+ memcpy(dev->dev_addr, plat->hwaddr, 6); -+ -+ printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION -+ ": %s on %s with PHY[%d] initialized\n", -+ dev->name, npe->plat->name, plat->phy_id); -+ -+ return 0; -+ -+out_putmod: -+ if (mac->rxq) -+ release_queue(mac->rxq); -+ if (mac->txq) -+ release_queue(mac->txq); -+ if (mac->rxdoneq) -+ release_queue(mac->rxdoneq); -+ module_put(mac->npe_dev->driver->owner); -+out_unmap: -+ iounmap(mac->addr); -+out_rel: -+ release_resource(mac->res); -+out_free: -+ kfree(mac); -+ return ret; -+} -+ -+static void drain_npe(struct mac_info *mac) -+{ -+ struct npe_info *npe = dev_get_drvdata(mac->npe_dev); -+ struct npe_cont *cont; -+ u32 phys; -+ int loop = 0; -+ -+ /* Now there are some skb hold by the NPE. -+ * We switch the MAC in loopback mode and send a pseudo packet -+ * that will be returned by the NPE in its last SKB. -+ * We will also try to isolate the PHY to keep the packets internal. -+ */ -+ -+ if (mac->txq_pkt <2) -+ mac->txq_pkt += init_buffer(tx_doneq, 5); -+ -+ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) { -+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_MDC_EN); -+ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN); -+ -+ npe_mh_npe_loopback_mode(npe, mac->plat, 1); -+ mdelay(200); -+ -+ while (mac->rxq_pkt && loop++ < 2000 ) { -+ phys = queue_get_entry(tx_doneq) & ~0xf; -+ if (!phys) -+ break; -+ cont = dma_to_virt(queue->dev, phys); -+ /* actually the packets should never leave the system, -+ * but if they do, they shall contain 0s instead of -+ * intresting random data.... -+ */ -+ memset(cont->data, 0, 64); -+ cont->eth.pkt_len = 64; -+ dma_sync_single(mac->txq->dev, phys, 64 + DMA_HDR_SIZE, -+ DMA_TO_DEVICE); -+ queue_put_entry(mac->txq, phys); -+ if (queue_stat(mac->txq) == 2) { /* overflow */ -+ queue_put_entry(tx_doneq, phys); -+ break; -+ } -+ mdelay(1); -+ mac->rxq_pkt -= destroy_buffer(mac->rxdoneq, -+ mac->rxq_pkt); -+ } -+ npe_mh_npe_loopback_mode(npe, mac->plat, 0); -+ } -+ /* Flush MAC TX fifo to drain the bogus packages */ -+ mac_set_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH); -+ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_RX_EN); -+ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_TX_EN); -+ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN); -+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH); -+ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH); -+} -+ -+static int mac_remove(struct platform_device *pdev) -+{ -+ struct net_device* dev = platform_get_drvdata(pdev); -+ struct mac_info *mac = netdev_priv(dev); -+ -+ unregister_netdev(dev); -+ -+ mac->rxq_pkt -= destroy_buffer(mac->rxq, mac->rxq_pkt); -+ if (mac->rxq_pkt) -+ drain_npe(mac); -+ -+ mac->txq_pkt -= destroy_buffer(mac->txq, mac->txq_pkt); -+ mac->txq_pkt -= destroy_buffer(tx_doneq, mac->txq_pkt); -+ -+ if (mac->rxq_pkt || mac->txq_pkt) -+ printk("Buffers lost in NPE: RX:%d, TX:%d\n", -+ mac->rxq_pkt, mac->txq_pkt); -+ -+ release_queue(mac->txq); -+ release_queue(mac->rxq); -+ release_queue(mac->rxdoneq); -+ -+ flush_scheduled_work(); -+ return_npe_dev(mac->npe_dev); -+ -+ iounmap(mac->addr); -+ release_resource(mac->res); -+ platform_set_drvdata(pdev, NULL); -+ free_netdev(dev); -+ return 0; -+} -+ -+static struct platform_driver ixp4xx_mac = { -+ .driver.name = IXMAC_NAME, -+ .probe = mac_probe, -+ .remove = mac_remove, -+}; -+ -+static int __init init_mac(void) -+{ -+ /* The TX done Queue handles skbs sent out by the NPE */ -+ tx_doneq = request_queue(TX_DONE_QID, 128); -+ if (IS_ERR(tx_doneq)) { -+ printk(KERN_ERR "Error requesting Q: %d\n", TX_DONE_QID); -+ return -EBUSY; -+ } -+ return platform_driver_register(&ixp4xx_mac); -+} -+ -+static void __exit finish_mac(void) -+{ -+ platform_driver_unregister(&ixp4xx_mac); -+ if (tx_doneq) { -+ release_queue(tx_doneq); -+ } -+} -+ -+module_init(init_mac); -+module_exit(finish_mac); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>"); -+ -Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe.c 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,291 @@ -+ -+#include <linux/ixp_npe.h> -+#include <asm/hardware.h> -+ -+#define RESET_NPE_PARITY 0x0800 -+#define PARITY_BIT_MASK 0x3F00FFFF -+#define CONFIG_CTRL_REG_MASK 0x3F3FFFFF -+#define MAX_RETRIES 1000000 -+#define NPE_PHYS_REG 32 -+#define RESET_MBST_VAL 0x0000F0F0 -+#define NPE_REGMAP 0x0000001E -+#define INSTR_WR_REG_SHORT 0x0000C000 -+#define INSTR_WR_REG_BYTE 0x00004000 -+#define MASK_ECS_REG_0_NEXTPC 0x1FFF0000 -+ -+#define INSTR_RD_FIFO 0x0F888220 -+#define INSTR_RESET_MBOX 0x0FAC8210 -+ -+#define ECS_REG_0_LDUR 8 -+#define ECS_REG_1_CCTXT 16 -+#define ECS_REG_1_SELCTXT 0 -+ -+#define ECS_BG_CTXT_REG_0 0x00 -+#define ECS_BG_CTXT_REG_1 0x01 -+#define ECS_BG_CTXT_REG_2 0x02 -+#define ECS_PRI_1_CTXT_REG_0 0x04 -+#define ECS_PRI_1_CTXT_REG_1 0x05 -+#define ECS_PRI_1_CTXT_REG_2 0x06 -+#define ECS_PRI_2_CTXT_REG_0 0x08 -+#define ECS_PRI_2_CTXT_REG_1 0x09 -+#define ECS_PRI_2_CTXT_REG_2 0x0A -+#define ECS_DBG_CTXT_REG_0 0x0C -+#define ECS_DBG_CTXT_REG_1 0x0D -+#define ECS_DBG_CTXT_REG_2 0x0E -+#define ECS_INSTRUCT_REG 0x11 -+ -+#define ECS_BG_CTXT_REG_0_RESET 0xA0000000 -+#define ECS_BG_CTXT_REG_1_RESET 0x01000000 -+#define ECS_BG_CTXT_REG_2_RESET 0x00008000 -+#define ECS_PRI_1_CTXT_REG_0_RESET 0x20000080 -+#define ECS_PRI_1_CTXT_REG_1_RESET 0x01000000 -+#define ECS_PRI_1_CTXT_REG_2_RESET 0x00008000 -+#define ECS_PRI_2_CTXT_REG_0_RESET 0x20000080 -+#define ECS_PRI_2_CTXT_REG_1_RESET 0x01000000 -+#define ECS_PRI_2_CTXT_REG_2_RESET 0x00008000 -+#define ECS_DBG_CTXT_REG_0_RESET 0x20000000 -+#define ECS_DBG_CTXT_REG_1_RESET 0x00000000 -+#define ECS_DBG_CTXT_REG_2_RESET 0x001E0000 -+#define ECS_INSTRUCT_REG_RESET 0x1003C00F -+ -+static struct { u32 reg; u32 val; } ecs_reset[] = -+{ -+ { ECS_BG_CTXT_REG_0, ECS_BG_CTXT_REG_0_RESET }, -+ { ECS_BG_CTXT_REG_1, ECS_BG_CTXT_REG_1_RESET }, -+ { ECS_BG_CTXT_REG_2, ECS_BG_CTXT_REG_2_RESET }, -+ { ECS_PRI_1_CTXT_REG_0, ECS_PRI_1_CTXT_REG_0_RESET }, -+ { ECS_PRI_1_CTXT_REG_1, ECS_PRI_1_CTXT_REG_1_RESET }, -+ { ECS_PRI_1_CTXT_REG_2, ECS_PRI_1_CTXT_REG_2_RESET }, -+ { ECS_PRI_2_CTXT_REG_0, ECS_PRI_2_CTXT_REG_0_RESET }, -+ { ECS_PRI_2_CTXT_REG_1, ECS_PRI_2_CTXT_REG_1_RESET }, -+ { ECS_PRI_2_CTXT_REG_2, ECS_PRI_2_CTXT_REG_2_RESET }, -+ { ECS_DBG_CTXT_REG_0, ECS_DBG_CTXT_REG_0_RESET }, -+ { ECS_DBG_CTXT_REG_1, ECS_DBG_CTXT_REG_1_RESET }, -+ { ECS_DBG_CTXT_REG_2, ECS_DBG_CTXT_REG_2_RESET }, -+ { ECS_INSTRUCT_REG, ECS_INSTRUCT_REG_RESET } -+}; -+ -+/* actually I have no idea what I'm doing here !! -+ * I only rewrite the "reset" sequence the way Intel does it. -+ */ -+ -+static void npe_debg_preexec(struct npe_info *npe) -+{ -+ u32 r = IX_NPEDL_MASK_ECS_DBG_REG_2_IF | IX_NPEDL_MASK_ECS_DBG_REG_2_IE; -+ -+ npe->exec_count = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXCT); -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCT, 0); -+ npe->ctx_reg2 = npe_read_ecs_reg(npe, ECS_DBG_CTXT_REG_2); -+ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_2, npe->ctx_reg2 | r); -+} -+ -+static void npe_debg_postexec(struct npe_info *npe) -+{ -+ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_0, 0); -+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCT, npe->exec_count); -+ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_2, npe->ctx_reg2); -+} -+ -+static int -+npe_debg_inst_exec(struct npe_info *npe, u32 instr, u32 ctx, u32 ldur) -+{ -+ u32 regval, wc; -+ int c = 0; -+ -+ regval = IX_NPEDL_MASK_ECS_REG_0_ACTIVE | -+ (ldur << ECS_REG_0_LDUR); -+ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_0 , regval); -+ /* set CCTXT at ECS DEBUG L3 to specify in which context -+ * to execute the instruction -+ */ -+ regval = (ctx << ECS_REG_1_CCTXT) | -+ (ctx << ECS_REG_1_SELCTXT); -+ npe_write_ecs_reg(npe, ECS_DBG_CTXT_REG_1, regval); -+ -+ /* clear the pipeline */ -+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); -+ -+ /* load NPE instruction into the instruction register */ -+ npe_write_ecs_reg(npe, ECS_INSTRUCT_REG, instr); -+ /* we need this value later to wait for -+ * completion of NPE execution step -+ */ -+ wc = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WC); -+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STEP); -+ -+ /* Watch Count register increments when NPE completes an instruction */ -+ while (wc == npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WC) && -+ ++c < MAX_RETRIES); -+ -+ if (c >= MAX_RETRIES) { -+ printk(KERN_ERR "%s reset:npe_debg_inst_exec(): Timeout\n", -+ npe->plat->name); -+ return 1; -+ } -+ return 0; -+} -+ -+static int npe_logical_reg_write8(struct npe_info *npe, u32 addr, u32 val) -+{ -+ u32 instr; -+ val &= 0xff; -+ /* here we build the NPE assembler instruction: -+ * mov8 d0, #0 */ -+ instr = INSTR_WR_REG_BYTE | /* OpCode */ -+ addr << 9 | /* base Operand */ -+ (val & 0x1f) << 4 | /* lower 5 bits to immediate data */ -+ (val & ~0x1f) << (18-5);/* higher 3 bits to CoProc instr. */ -+ /* and execute it */ -+ return npe_debg_inst_exec(npe, instr, 0, 1); -+} -+ -+static int npe_logical_reg_write16(struct npe_info *npe, u32 addr, u32 val) -+{ -+ u32 instr; -+ /* here we build the NPE assembler instruction: -+ * mov16 d0, #0 */ -+ val &= 0xffff; -+ instr = INSTR_WR_REG_SHORT | /* OpCode */ -+ addr << 9 | /* base Operand */ -+ (val & 0x1f) << 4 | /* lower 5 bits to immediate data */ -+ (val & ~0x1f) << (18-5);/* higher 11 bits to CoProc instr. */ -+ /* and execute it */ -+ return npe_debg_inst_exec(npe, instr, 0, 1); -+} -+ -+static int npe_logical_reg_write32(struct npe_info *npe, u32 addr, u32 val) -+{ -+ /* write in 16 bit steps first the high and then the low value */ -+ npe_logical_reg_write16(npe, addr, val >> 16); -+ return npe_logical_reg_write16(npe, addr+2, val & 0xffff); -+} -+ -+void npe_reset(struct npe_info *npe) -+{ -+ u32 reg, cfg_ctrl; -+ int i; -+ struct { u32 reset; int addr; int size; } ctx_reg[] = { -+ { 0x80, 0x1b, 8 }, -+ { 0, 0x1c, 16 }, -+ { 0x820, 0x1e, 16 }, -+ { 0, 0x1f, 8 } -+ }, *cr; -+ -+ cfg_ctrl = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL); -+ cfg_ctrl |= 0x3F000000; -+ /* disable the parity interrupt */ -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, cfg_ctrl & PARITY_BIT_MASK); -+ -+ npe_debg_preexec(npe); -+ -+ /* clear the FIFOs */ -+ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_WFIFO) == -+ IX_NPEDL_MASK_WFIFO_VALID); -+ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) == -+ IX_NPEDL_MASK_STAT_OFNE) -+ { -+ u32 reg; -+ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_FIFO); -+ printk("%s reset: Read FIFO:=%x\n", npe->plat->name, reg); -+ } -+ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) == -+ IX_NPEDL_MASK_STAT_IFNE) { -+ npe_debg_inst_exec(npe, INSTR_RD_FIFO, 0, 0); -+ } -+ -+ /* Reset the mailbox reg */ -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_MBST, RESET_MBST_VAL); -+ npe_debg_inst_exec(npe, INSTR_RESET_MBOX, 0, 0); -+ -+ /* Reset the physical registers in the NPE register file */ -+ for (i=0; i<NPE_PHYS_REG; i++) { -+ npe_logical_reg_write16(npe, NPE_REGMAP, i >> 1); -+ npe_logical_reg_write32(npe, (i&1) *4, 0); -+ } -+ -+ /* Reset the context store. Iterate over the 16 ctx s */ -+ for(i=0; i<16; i++) { -+ for (reg=0; reg<4; reg++) { -+ /* There is no (STEVT) register for Context 0. -+ * ignore if register=0 and ctx=0 */ -+ if (!(reg || i)) -+ continue; -+ /* Context 0 has no STARTPC. Instead, this value is -+ * used to set NextPC for Background ECS, -+ * to set where NPE starts executing code -+ */ -+ if (!i && reg==1) { -+ u32 r; -+ r = npe_read_ecs_reg(npe, ECS_BG_CTXT_REG_0); -+ r &= ~MASK_ECS_REG_0_NEXTPC; -+ r |= (cr->reset << 16) & MASK_ECS_REG_0_NEXTPC; -+ continue; -+ } -+ cr = ctx_reg + reg; -+ switch (cr->size) { -+ case 8: -+ npe_logical_reg_write8(npe, cr->addr, -+ cr->reset); -+ break; -+ case 16: -+ npe_logical_reg_write16(npe, cr->addr, -+ cr->reset); -+ } -+ } -+ } -+ npe_debg_postexec(npe); -+ -+ for (i=0; i< ARRAY_SIZE(ecs_reset); i++) { -+ npe_write_ecs_reg(npe, ecs_reset[i].reg, ecs_reset[i].val); -+ } -+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT); -+ -+ for (i=IX_NPEDL_REG_OFFSET_EXCT; i<=IX_NPEDL_REG_OFFSET_AP3; i+=4) { -+ npe_reg_write(npe, i, 0); -+ } -+ -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_WC, 0); -+ -+ reg = *IXP4XX_EXP_CFG2; -+ reg |= 0x800 << npe->plat->id; /* IX_FUSE_NPE[ABC] */ -+ *IXP4XX_EXP_CFG2 = reg; -+ reg &= ~(0x800 << npe->plat->id); /* IX_FUSE_NPE[ABC] */ -+ *IXP4XX_EXP_CFG2 = reg; -+ -+ npe_stop(npe); -+ -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, -+ cfg_ctrl & CONFIG_CTRL_REG_MASK); -+ npe->loaded = 0; -+} -+ -+ -+void npe_stop(struct npe_info *npe) -+{ -+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STOP); -+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); -+} -+ -+static void npe_reset_active(struct npe_info *npe, u32 reg) -+{ -+ u32 regval; -+ -+ regval = npe_read_ecs_reg(npe, reg); -+ regval &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE; -+ npe_write_ecs_reg(npe, reg, regval); -+} -+ -+void npe_start(struct npe_info *npe) -+{ -+ npe_reset_active(npe, IX_NPEDL_ECS_PRI_1_CTXT_REG_0); -+ npe_reset_active(npe, IX_NPEDL_ECS_PRI_2_CTXT_REG_0); -+ npe_reset_active(npe, IX_NPEDL_ECS_DBG_CTXT_REG_0); -+ -+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); -+ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_START); -+} -+ -+EXPORT_SYMBOL(npe_stop); -+EXPORT_SYMBOL(npe_start); -+EXPORT_SYMBOL(npe_reset); -Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe_mh.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/npe_mh.c 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,170 @@ -+/* -+ * npe_mh.c - NPE message handler. -+ * -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+#include <linux/ixp_npe.h> -+#include <linux/slab.h> -+ -+#define MAX_RETRY 200 -+ -+struct npe_mh_msg { -+ union { -+ u8 byte[8]; /* Very desciptive name, I know ... */ -+ u32 data[2]; -+ } u; -+}; -+ -+/* -+ * The whole code in this function must be reworked. -+ * It is in a state that works but is not rock solid -+ */ -+static int send_message(struct npe_info *npe, struct npe_mh_msg *msg) -+{ -+ int i,j; -+ u32 send[2], recv[2]; -+ -+ for (i=0; i<2; i++) -+ send[i] = be32_to_cpu(msg->u.data[i]); -+ -+ if ((npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) & -+ IX_NPEMH_NPE_STAT_IFNE)) -+ return -1; -+ -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_FIFO, send[0]); -+ for(i=0; i<MAX_RETRY; i++) { -+ /* if the IFNF status bit is unset then the inFIFO is full */ -+ if (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) & -+ IX_NPEMH_NPE_STAT_IFNF) -+ break; -+ } -+ if (i>=MAX_RETRY) -+ return -1; -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_FIFO, send[1]); -+ i=0; -+ while (!(npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) & -+ IX_NPEMH_NPE_STAT_OFNE)) { -+ if (i++>MAX_RETRY) { -+ printk("Waiting for Output FIFO NotEmpty failed\n"); -+ return -1; -+ } -+ } -+ //printk("Output FIFO Not Empty. Loops: %d\n", i); -+ j=0; -+ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) & -+ IX_NPEMH_NPE_STAT_OFNE) { -+ recv[j&1] = npe_reg_read(npe,IX_NPEDL_REG_OFFSET_FIFO); -+ j++; -+ } -+ if ((recv[0] != send[0]) || (recv[1] != send[1])) { -+ if (send[0] || send[1]) { -+ /* all CMDs return the complete message as answer, -+ * only GETSTATUS returns the ImageID of the NPE -+ */ -+ printk("Unexpected answer: " -+ "Send %08x:%08x Ret %08x:%08x\n", -+ send[0], send[1], recv[0], recv[1]); -+ } -+ } -+ return 0; -+} -+ -+#define CMD 0 -+#define PORT 1 -+#define MAC 2 -+ -+#define IX_ETHNPE_NPE_GETSTATUS 0x00 -+#define IX_ETHNPE_EDB_SETPORTADDRESS 0x01 -+#define IX_ETHNPE_GETSTATS 0x04 -+#define IX_ETHNPE_RESETSTATS 0x05 -+#define IX_ETHNPE_FW_SETFIREWALLMODE 0x0E -+#define IX_ETHNPE_VLAN_SETRXQOSENTRY 0x0B -+#define IX_ETHNPE_SETLOOPBACK_MODE 0x12 -+ -+#define logical_id(mp) (((mp)->npe_id << 4) | ((mp)->port_id & 0xf)) -+ -+int npe_mh_status(struct npe_info *npe) -+{ -+ struct npe_mh_msg msg; -+ -+ memset(&msg, 0, sizeof(msg)); -+ msg.u.byte[CMD] = IX_ETHNPE_NPE_GETSTATUS; -+ return send_message(npe, &msg); -+} -+ -+int npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp, -+ u8 *macaddr) -+{ -+ struct npe_mh_msg msg; -+ -+ msg.u.byte[CMD] = IX_ETHNPE_EDB_SETPORTADDRESS; -+ msg.u.byte[PORT] = mp->eth_id; -+ memcpy(msg.u.byte + MAC, macaddr, 6); -+ -+ return send_message(npe, &msg); -+} -+ -+int npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp) -+{ -+ struct npe_mh_msg msg; -+ -+ memset(&msg, 0, sizeof(msg)); -+ msg.u.byte[CMD] = IX_ETHNPE_FW_SETFIREWALLMODE; -+ msg.u.byte[PORT] = logical_id(mp); -+ -+ return send_message(npe, &msg); -+} -+ -+int npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp, -+ int enable) -+{ -+ struct npe_mh_msg msg; -+ -+ memset(&msg, 0, sizeof(msg)); -+ msg.u.byte[CMD] = IX_ETHNPE_SETLOOPBACK_MODE; -+ msg.u.byte[PORT] = logical_id(mp); -+ msg.u.byte[3] = enable ? 1 : 0; -+ -+ return send_message(npe, &msg); -+} -+ -+int npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid) -+{ -+ struct npe_mh_msg msg; -+ int i, ret; -+ -+ memset(&msg, 0, sizeof(msg)); -+ msg.u.byte[CMD] = IX_ETHNPE_VLAN_SETRXQOSENTRY; -+ msg.u.byte[PORT] = logical_id(mp); -+ msg.u.byte[5] = qid | 0x80; -+ msg.u.byte[7] = qid<<4; -+ for(i=0; i<8; i++) { -+ msg.u.byte[3] = i; -+ if ((ret = send_message(npe, &msg))) -+ return ret; -+ } -+ return 0; -+} -+ -+int npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys, -+ int reset) -+{ -+ struct npe_mh_msg msg; -+ memset(&msg, 0, sizeof(msg)); -+ msg.u.byte[CMD] = reset ? IX_ETHNPE_RESETSTATS : IX_ETHNPE_GETSTATS; -+ msg.u.byte[PORT] = logical_id(mp); -+ msg.u.data[1] = cpu_to_npe32(cpu_to_be32(phys)); -+ -+ return send_message(npe, &msg); -+} -+ -+ -+EXPORT_SYMBOL(npe_mh_status); -+EXPORT_SYMBOL(npe_mh_setportaddr); -+EXPORT_SYMBOL(npe_mh_disable_firewall); -+EXPORT_SYMBOL(npe_mh_set_rxqid); -+EXPORT_SYMBOL(npe_mh_npe_loopback_mode); -+EXPORT_SYMBOL(npe_mh_get_stats); -Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/phy.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/phy.c 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,113 @@ -+/* -+ * phy.c - MDIO functions and mii initialisation -+ * -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+ -+#include <linux/mutex.h> -+#include "mac.h" -+ -+#define MAX_PHYS (1<<5) -+ -+/* -+ * We must always use the same MAC for acessing the MDIO -+ * We may not use each MAC for its PHY :-( -+ */ -+ -+static struct net_device *phy_dev = NULL; -+static struct mutex mtx; -+ -+/* here we remember if the PHY is alive, to avoid log dumping */ -+static int phy_works[MAX_PHYS]; -+ -+int mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg) -+{ -+ struct mac_info *mac; -+ u32 cmd, reg; -+ int cnt = 0; -+ -+ if (!phy_dev) -+ return 0; -+ -+ mac = netdev_priv(phy_dev); -+ cmd = mdio_cmd(phy_addr, phy_reg); -+ mutex_lock_interruptible(&mtx); -+ mac_mdio_cmd_write(mac, cmd); -+ while((cmd = mac_mdio_cmd_read(mac)) & MII_GO) { -+ if (++cnt >= 100) { -+ printk("%s: PHY[%d] access failed\n", -+ dev->name, phy_addr); -+ break; -+ } -+ schedule(); -+ } -+ reg = mac_mdio_status_read(mac); -+ mutex_unlock(&mtx); -+ if (reg & MII_READ_FAIL) { -+ if (phy_works[phy_addr]) { -+ printk("%s: PHY[%d] unresponsive\n", -+ dev->name, phy_addr); -+ } -+ reg = 0; -+ phy_works[phy_addr] = 0; -+ } else { -+ if ( !phy_works[phy_addr]) { -+ printk("%s: PHY[%d] responsive again\n", -+ dev->name, phy_addr); -+ } -+ phy_works[phy_addr] = 1; -+ } -+ return reg & 0xffff; -+} -+ -+void -+mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val) -+{ -+ struct mac_info *mac; -+ u32 cmd; -+ int cnt=0; -+ -+ if (!phy_dev) -+ return; -+ -+ mac = netdev_priv(phy_dev); -+ cmd = mdio_cmd(phy_addr, phy_reg) | MII_WRITE | val; -+ -+ mutex_lock_interruptible(&mtx); -+ mac_mdio_cmd_write(mac, cmd); -+ while((cmd = mac_mdio_cmd_read(mac)) & MII_GO) { -+ if (++cnt >= 100) { -+ printk("%s: PHY[%d] access failed\n", -+ dev->name, phy_addr); -+ break; -+ } -+ schedule(); -+ } -+ mutex_unlock(&mtx); -+} -+ -+void init_mdio(struct net_device *dev, int phy_id) -+{ -+ struct mac_info *mac = netdev_priv(dev); -+ int i; -+ -+ /* All phy operations should use the same MAC -+ * (my experience) -+ */ -+ if (mac->plat->eth_id == 0) { -+ mutex_init(&mtx); -+ phy_dev = dev; -+ for (i=0; i<MAX_PHYS; i++) -+ phy_works[i] = 1; -+ } -+ mac->mii.dev = dev; -+ mac->mii.phy_id = phy_id; -+ mac->mii.phy_id_mask = MAX_PHYS - 1; -+ mac->mii.reg_num_mask = 0x1f; -+ mac->mii.mdio_read = mdio_read_register; -+ mac->mii.mdio_write = mdio_write_register; -+} -+ -Index: linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ucode_dl.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/drivers/net/ixp4xx/ucode_dl.c 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,479 @@ -+/* -+ * ucode_dl.c - provide an NPE device and a char-dev for microcode download -+ * -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/miscdevice.h> -+#include <linux/platform_device.h> -+#include <linux/fs.h> -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/firmware.h> -+#include <linux/dma-mapping.h> -+#include <linux/byteorder/swab.h> -+#include <asm/uaccess.h> -+#include <asm/io.h> -+ -+#include <linux/ixp_npe.h> -+ -+#define IXNPE_VERSION "IXP4XX NPE driver Version 0.3.0" -+ -+#define DL_MAGIC 0xfeedf00d -+#define DL_MAGIC_SWAP 0x0df0edfe -+ -+#define EOF_BLOCK 0xf -+#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \ -+ sizeof(struct dl_image)) -+ -+#define BT_INSTR 0 -+#define BT_DATA 1 -+ -+enum blk_type { -+ instruction, -+ data, -+}; -+ -+struct dl_block { -+ u32 type; -+ u32 offset; -+}; -+ -+struct dl_image { -+ u32 magic; -+ u32 id; -+ u32 size; -+ union { -+ u32 data[0]; -+ struct dl_block block[0]; -+ } u; -+}; -+ -+struct dl_codeblock { -+ u32 npe_addr; -+ u32 size; -+ u32 data[0]; -+}; -+ -+static struct platform_driver ixp4xx_npe_driver; -+ -+static int match_by_npeid(struct device *dev, void *id) -+{ -+ struct npe_info *npe = dev_get_drvdata(dev); -+ if (!npe->plat) -+ return 0; -+ return (npe->plat->id == *(int*)id); -+} -+ -+struct device *get_npe_by_id(int id) -+{ -+ struct device *dev = driver_find_device(&ixp4xx_npe_driver.driver, -+ NULL, &id, match_by_npeid); -+ if (dev) { -+ struct npe_info *npe = dev_get_drvdata(dev); -+ if (!try_module_get(THIS_MODULE)) { -+ put_device(dev); -+ return NULL; -+ } -+ npe->usage++; -+ } -+ return dev; -+} -+ -+void return_npe_dev(struct device *dev) -+{ -+ struct npe_info *npe = dev_get_drvdata(dev); -+ put_device(dev); -+ module_put(THIS_MODULE); -+ npe->usage--; -+} -+ -+static int -+download_block(struct npe_info *npe, struct dl_codeblock *cb, unsigned type) -+{ -+ int i; -+ int cmd; -+ -+ switch (type) { -+ case BT_DATA: -+ cmd = IX_NPEDL_EXCTL_CMD_WR_DATA_MEM; -+ if (cb->npe_addr + cb->size > npe->plat->data_size) { -+ printk(KERN_INFO "Data size too large: %d+%d > %d\n", -+ cb->npe_addr, cb->size, npe->plat->data_size); -+ return -EIO; -+ } -+ break; -+ case BT_INSTR: -+ cmd = IX_NPEDL_EXCTL_CMD_WR_INS_MEM; -+ if (cb->npe_addr + cb->size > npe->plat->inst_size) { -+ printk(KERN_INFO "Instr size too large: %d+%d > %d\n", -+ cb->npe_addr, cb->size, npe->plat->inst_size); -+ return -EIO; -+ } -+ break; -+ default: -+ printk(KERN_INFO "Unknown CMD: %d\n", type); -+ return -EIO; -+ } -+ -+ for (i=0; i < cb->size; i++) { -+ npe_write_cmd(npe, cb->npe_addr + i, cb->data[i], cmd); -+ } -+ -+ return 0; -+} -+ -+static int store_npe_image(struct dl_image *image, struct device *dev) -+{ -+ struct dl_block *blk; -+ struct dl_codeblock *cb; -+ struct npe_info *npe; -+ int ret=0; -+ -+ if (!dev) { -+ dev = get_npe_by_id( (image->id >> 24) & 0xf); -+ return_npe_dev(dev); -+ } -+ if (!dev) -+ return -ENODEV; -+ -+ npe = dev_get_drvdata(dev); -+ if (npe->loaded && (npe->usage > 0)) { -+ printk(KERN_INFO "Cowardly refusing to reload an Image " -+ "into the used and running %s\n", npe->plat->name); -+ return 0; /* indicate success anyway... */ -+ } -+ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xf)) { -+ printk(KERN_INFO "IXP46x NPE image ignored on IXP42x\n"); -+ return -EIO; -+ } -+ -+ npe_stop(npe); -+ npe_reset(npe); -+ -+ for (blk = image->u.block; blk->type != EOF_BLOCK; blk++) { -+ if (blk->offset > image->size) { -+ printk(KERN_INFO "Block offset out of range\n"); -+ return -EIO; -+ } -+ cb = (struct dl_codeblock*)&image->u.data[blk->offset]; -+ if (blk->offset + cb->size + 2 > image->size) { -+ printk(KERN_INFO "Codeblock size out of range\n"); -+ return -EIO; -+ } -+ if ((ret = download_block(npe, cb, blk->type))) -+ return ret; -+ } -+ *(u32*)npe->img_info = cpu_to_be32(image->id); -+ npe_start(npe); -+ -+ printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n", -+ npe->plat->name, npe->img_info[1], npe->img_info[2], -+ npe->img_info[3], npe_status(npe)); -+ if (npe_mh_status(npe)) { -+ printk(KERN_ERR "%s not responding\n", npe->plat->name); -+ } -+ npe->loaded = 1; -+ return 0; -+} -+ -+static int ucode_open(struct inode *inode, struct file *file) -+{ -+ file->private_data = kmalloc(sizeof(struct dl_image), GFP_KERNEL); -+ if (!file->private_data) -+ return -ENOMEM; -+ return 0; -+} -+ -+static int ucode_close(struct inode *inode, struct file *file) -+{ -+ kfree(file->private_data); -+ return 0; -+} -+ -+static ssize_t ucode_write(struct file *file, const char __user *buf, -+ size_t count, loff_t *ppos) -+{ -+ union { -+ char *data; -+ struct dl_image *image; -+ } u; -+ const char __user *cbuf = buf; -+ -+ u.data = file->private_data; -+ -+ while (count) { -+ int len; -+ if (*ppos < sizeof(struct dl_image)) { -+ len = sizeof(struct dl_image) - *ppos; -+ len = len > count ? count : len; -+ if (copy_from_user(u.data + *ppos, cbuf, len)) -+ return -EFAULT; -+ count -= len; -+ *ppos += len; -+ cbuf += len; -+ continue; -+ } else if (*ppos == sizeof(struct dl_image)) { -+ void *data; -+ if (u.image->magic == DL_MAGIC_SWAP) { -+ printk(KERN_INFO "swapped image found\n"); -+ u.image->id = swab32(u.image->id); -+ u.image->size = swab32(u.image->size); -+ } else if (u.image->magic != DL_MAGIC) { -+ printk(KERN_INFO "Bad magic:%x\n", -+ u.image->magic); -+ return -EFAULT; -+ } -+ len = IMG_SIZE(u.image); -+ data = kmalloc(len, GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ memcpy(data, u.data, *ppos); -+ kfree(u.data); -+ u.data = (char*)data; -+ file->private_data = data; -+ } -+ len = IMG_SIZE(u.image) - *ppos; -+ len = len > count ? count : len; -+ if (copy_from_user(u.data + *ppos, cbuf, len)) -+ return -EFAULT; -+ count -= len; -+ *ppos += len; -+ cbuf += len; -+ if (*ppos == IMG_SIZE(u.image)) { -+ int ret, i; -+ *ppos = 0; -+ if (u.image->magic == DL_MAGIC_SWAP) { -+ for (i=0; i<u.image->size; i++) { -+ u.image->u.data[i] = -+ swab32(u.image->u.data[i]); -+ } -+ u.image->magic = swab32(u.image->magic); -+ } -+ ret = store_npe_image(u.image, NULL); -+ if (ret) { -+ printk(KERN_INFO "Error in NPE image: %x\n", -+ u.image->id); -+ return ret; -+ } -+ } -+ } -+ return (cbuf-buf); -+} -+ -+static void npe_firmware_probe(struct device *dev) -+{ -+#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \ -+ && defined(MODULE) -+ const struct firmware *fw_entry; -+ struct npe_info *npe = dev_get_drvdata(dev); -+ struct dl_image *image; -+ int ret = -1, i; -+ -+ if (request_firmware(&fw_entry, npe->plat->name, dev) != 0) { -+ return; -+ } -+ image = (struct dl_image*)fw_entry->data; -+ /* Sanity checks */ -+ if (fw_entry->size < sizeof(struct dl_image)) { -+ printk(KERN_ERR "Firmware error: too small\n"); -+ goto out; -+ } -+ if (image->magic == DL_MAGIC_SWAP) { -+ printk(KERN_INFO "swapped image found\n"); -+ image->id = swab32(image->id); -+ image->size = swab32(image->size); -+ } else if (image->magic != DL_MAGIC) { -+ printk(KERN_ERR "Bad magic:%x\n", image->magic); -+ goto out; -+ } -+ if (IMG_SIZE(image) != fw_entry->size) { -+ printk(KERN_ERR "Firmware error: bad size\n"); -+ goto out; -+ } -+ if (((image->id >> 24) & 0xf) != npe->plat->id) { -+ printk(KERN_ERR "NPE id missmatch\n"); -+ goto out; -+ } -+ if (image->magic == DL_MAGIC_SWAP) { -+ for (i=0; i<image->size; i++) { -+ image->u.data[i] = swab32(image->u.data[i]); -+ } -+ image->magic = swab32(image->magic); -+ } -+ -+ ret = store_npe_image(image, dev); -+out: -+ if (ret) { -+ printk(KERN_ERR "Error downloading Firmware for %s\n", -+ npe->plat->name); -+ } -+ release_firmware(fw_entry); -+#endif -+} -+ -+static void disable_npe_irq(struct npe_info *npe) -+{ -+ u32 reg; -+ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL); -+ reg &= ~(IX_NPEMH_NPE_CTL_OFE | IX_NPEMH_NPE_CTL_IFE); -+ reg |= IX_NPEMH_NPE_CTL_OFEWE | IX_NPEMH_NPE_CTL_IFEWE; -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_CTL, reg); -+} -+ -+static ssize_t show_npe_state(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ struct npe_info *npe = dev_get_drvdata(dev); -+ -+ strcpy(buf, npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN ? -+ "start\n" : "stop\n"); -+ return strlen(buf); -+} -+ -+static ssize_t set_npe_state(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct npe_info *npe = dev_get_drvdata(dev); -+ -+ if (npe->usage) { -+ printk("%s in use: read-only\n", npe->plat->name); -+ return count; -+ } -+ if (!strncmp(buf, "start", 5)) { -+ npe_start(npe); -+ } -+ if (!strncmp(buf, "stop", 4)) { -+ npe_stop(npe); -+ } -+ if (!strncmp(buf, "reset", 5)) { -+ npe_stop(npe); -+ npe_reset(npe); -+ } -+ return count; -+} -+ -+static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, show_npe_state, set_npe_state); -+ -+static int npe_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ struct npe_info *npe; -+ struct npe_plat_data *plat = pdev->dev.platform_data; -+ int err, size, ret=0; -+ -+ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0))) -+ return -EIO; -+ -+ if (!(npe = kzalloc(sizeof(struct npe_info), GFP_KERNEL))) -+ return -ENOMEM; -+ -+ size = res->end - res->start +1; -+ npe->res = request_mem_region(res->start, size, plat->name); -+ if (!npe->res) { -+ ret = -EBUSY; -+ printk(KERN_ERR "Failed to get memregion(%x, %x)\n", -+ res->start, size); -+ goto out_free; -+ } -+ -+ npe->addr = ioremap(res->start, size); -+ if (!npe->addr) { -+ ret = -ENOMEM; -+ printk(KERN_ERR "Failed to ioremap(%x, %x)\n", -+ res->start, size); -+ goto out_rel; -+ } -+ -+ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK; -+ -+ platform_set_drvdata(pdev, npe); -+ -+ err = device_create_file(&pdev->dev, &dev_attr_state); -+ if (err) -+ goto out_rel; -+ -+ npe->plat = plat; -+ disable_npe_irq(npe); -+ npe->usage = 0; -+ npe_reset(npe); -+ npe_firmware_probe(&pdev->dev); -+ -+ return 0; -+ -+out_rel: -+ release_resource(npe->res); -+out_free: -+ kfree(npe); -+ return ret; -+} -+ -+static struct file_operations ucode_dl_fops = { -+ .owner = THIS_MODULE, -+ .write = ucode_write, -+ .open = ucode_open, -+ .release = ucode_close, -+}; -+ -+static struct miscdevice ucode_dl_dev = { -+ .minor = MICROCODE_MINOR, -+ .name = "ixp4xx_ucode", -+ .fops = &ucode_dl_fops, -+}; -+ -+static int npe_remove(struct platform_device *pdev) -+{ -+ struct npe_info *npe = platform_get_drvdata(pdev); -+ -+ device_remove_file(&pdev->dev, &dev_attr_state); -+ -+ iounmap(npe->addr); -+ release_resource(npe->res); -+ kfree(npe); -+ return 0; -+} -+ -+static struct platform_driver ixp4xx_npe_driver = { -+ .driver = { -+ .name = "ixp4xx_npe", -+ .owner = THIS_MODULE, -+ }, -+ .probe = npe_probe, -+ .remove = npe_remove, -+}; -+ -+static int __init init_npedriver(void) -+{ -+ int ret; -+ if ((ret = misc_register(&ucode_dl_dev))){ -+ printk(KERN_ERR "Failed to register misc device %d\n", -+ MICROCODE_MINOR); -+ return ret; -+ } -+ if ((ret = platform_driver_register(&ixp4xx_npe_driver))) -+ misc_deregister(&ucode_dl_dev); -+ else -+ printk(KERN_INFO IXNPE_VERSION " initialized\n"); -+ -+ return ret; -+ -+} -+ -+static void __exit finish_npedriver(void) -+{ -+ misc_deregister(&ucode_dl_dev); -+ platform_driver_unregister(&ixp4xx_npe_driver); -+} -+ -+module_init(init_npedriver); -+module_exit(finish_npedriver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>"); -+ -+EXPORT_SYMBOL(get_npe_by_id); -+EXPORT_SYMBOL(return_npe_dev); -Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h -=================================================================== ---- linux-2.6.21-rc1-arm.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2007-02-21 02:24:18.000000000 -0800 -+++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2007-02-21 02:24:35.000000000 -0800 -@@ -22,6 +22,8 @@ - #ifndef _ASM_ARM_IXP4XX_H_ - #define _ASM_ARM_IXP4XX_H_ - -+#include "npe_regs.h" -+ - /* - * IXP4xx Linux Memory Map: - * -@@ -44,6 +46,12 @@ - */ - - /* -+ * PCI Memory Space -+ */ -+#define IXP4XX_PCIMEM_BASE_PHYS (0x48000000) -+#define IXP4XX_PCIMEM_REGION_SIZE (0x04000000) -+#define IXP4XX_PCIMEM_BAR_SIZE (0x01000000) -+/* - * Queue Manager - */ - #define IXP4XX_QMGR_BASE_PHYS (0x60000000) -@@ -322,7 +330,13 @@ - #define PCI_ATPDMA0_LENADDR_OFFSET 0x48 - #define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C - #define PCI_ATPDMA1_PCIADDR_OFFSET 0x50 --#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 -+#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 -+#define PCI_PTADMA0_AHBADDR_OFFSET 0x58 -+#define PCI_PTADMA0_PCIADDR_OFFSET 0x5c -+#define PCI_PTADMA0_LENADDR_OFFSET 0x60 -+#define PCI_PTADMA1_AHBADDR_OFFSET 0x64 -+#define PCI_PTADMA1_PCIADDR_OFFSET 0x68 -+#define PCI_PTADMA1_LENADDR_OFFSET 0x6c - - /* - * PCI Control/Status Registers -@@ -351,6 +365,12 @@ - #define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET) - #define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET) - #define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET) -+#define PCI_PTADMA0_AHBADDR IXP4XX_PCI_CSR(PCI_PTADMA0_AHBADDR_OFFSET) -+#define PCI_PTADMA0_PCIADDR IXP4XX_PCI_CSR(PCI_PTADMA0_PCIADDR_OFFSET) -+#define PCI_PTADMA0_LENADDR IXP4XX_PCI_CSR(PCI_PTADMA0_LENADDR_OFFSET) -+#define PCI_PTADMA1_AHBADDR IXP4XX_PCI_CSR(PCI_PTADMA1_AHBADDR_OFFSET) -+#define PCI_PTADMA1_PCIADDR IXP4XX_PCI_CSR(PCI_PTADMA1_PCIADDR_OFFSET) -+#define PCI_PTADMA1_LENADDR IXP4XX_PCI_CSR(PCI_PTADMA1_LENADDR_OFFSET) - - /* - * PCI register values and bit definitions -@@ -607,6 +627,34 @@ - - #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -+ -+/* Fuse Bits of IXP_EXP_CFG2 */ -+#define IX_FUSE_RCOMP (1 << 0) -+#define IX_FUSE_USB (1 << 1) -+#define IX_FUSE_HASH (1 << 2) -+#define IX_FUSE_AES (1 << 3) -+#define IX_FUSE_DES (1 << 4) -+#define IX_FUSE_HDLC (1 << 5) -+#define IX_FUSE_AAL (1 << 6) -+#define IX_FUSE_HSS (1 << 7) -+#define IX_FUSE_UTOPIA (1 << 8) -+#define IX_FUSE_ETH0 (1 << 9) -+#define IX_FUSE_ETH1 (1 << 10) -+#define IX_FUSE_NPEA (1 << 11) -+#define IX_FUSE_NPEB (1 << 12) -+#define IX_FUSE_NPEC (1 << 13) -+#define IX_FUSE_PCI (1 << 14) -+#define IX_FUSE_ECC (1 << 15) -+#define IX_FUSE_UTOPIA_PHY_LIMIT (3 << 16) -+#define IX_FUSE_USB_HOST (1 << 18) -+#define IX_FUSE_NPEA_ETH (1 << 19) -+#define IX_FUSE_NPEB_ETH (1 << 20) -+#define IX_FUSE_RSA (1 << 21) -+#define IX_FUSE_XSCALE_MAX_FREQ (3 << 22) -+ -+#define IX_FUSE_IXP46X_ONLY IX_FUSE_XSCALE_MAX_FREQ | IX_FUSE_RSA | \ -+ IX_FUSE_NPEB_ETH | IX_FUSE_NPEA_ETH | IX_FUSE_USB_HOST | IX_FUSE_ECC -+ - #ifndef __ASSEMBLY__ - static inline int cpu_is_ixp46x(void) - { -@@ -620,6 +668,15 @@ - #endif - return 0; - } -+ -+static inline u32 ix_fuse(void) -+{ -+ unsigned int fuses = ~(*IXP4XX_EXP_CFG2); -+ if (!cpu_is_ixp46x()) -+ fuses &= ~IX_FUSE_IXP46X_ONLY; -+ -+ return fuses; -+} - #endif - - #endif -Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/npe_regs.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/npe_regs.h 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,82 @@ -+#ifndef NPE_REGS_H -+#define NPE_REGS_H -+ -+/* Execution Address */ -+#define IX_NPEDL_REG_OFFSET_EXAD 0x00 -+/* Execution Data */ -+#define IX_NPEDL_REG_OFFSET_EXDATA 0x04 -+/* Execution Control */ -+#define IX_NPEDL_REG_OFFSET_EXCTL 0x08 -+/* Execution Count */ -+#define IX_NPEDL_REG_OFFSET_EXCT 0x0C -+/* Action Point 0 */ -+#define IX_NPEDL_REG_OFFSET_AP0 0x10 -+/* Action Point 1 */ -+#define IX_NPEDL_REG_OFFSET_AP1 0x14 -+/* Action Point 2 */ -+#define IX_NPEDL_REG_OFFSET_AP2 0x18 -+/* Action Point 3 */ -+#define IX_NPEDL_REG_OFFSET_AP3 0x1C -+/* Watchpoint FIFO */ -+#define IX_NPEDL_REG_OFFSET_WFIFO 0x20 -+/* Watch Count */ -+#define IX_NPEDL_REG_OFFSET_WC 0x24 -+/* Profile Count */ -+#define IX_NPEDL_REG_OFFSET_PROFCT 0x28 -+ -+/* Messaging Status */ -+#define IX_NPEDL_REG_OFFSET_STAT 0x2C -+/* Messaging Control */ -+#define IX_NPEDL_REG_OFFSET_CTL 0x30 -+/* Mailbox Status */ -+#define IX_NPEDL_REG_OFFSET_MBST 0x34 -+/* messaging in/out FIFO */ -+#define IX_NPEDL_REG_OFFSET_FIFO 0x38 -+ -+ -+#define IX_NPEDL_MASK_ECS_DBG_REG_2_IF 0x00100000 -+#define IX_NPEDL_MASK_ECS_DBG_REG_2_IE 0x00080000 -+#define IX_NPEDL_MASK_ECS_REG_0_ACTIVE 0x80000000 -+ -+#define IX_NPEDL_EXCTL_CMD_NPE_STEP 0x01 -+#define IX_NPEDL_EXCTL_CMD_NPE_START 0x02 -+#define IX_NPEDL_EXCTL_CMD_NPE_STOP 0x03 -+#define IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE 0x04 -+#define IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT 0x0C -+#define IX_NPEDL_EXCTL_CMD_RD_INS_MEM 0x10 -+#define IX_NPEDL_EXCTL_CMD_WR_INS_MEM 0x11 -+#define IX_NPEDL_EXCTL_CMD_RD_DATA_MEM 0x12 -+#define IX_NPEDL_EXCTL_CMD_WR_DATA_MEM 0x13 -+#define IX_NPEDL_EXCTL_CMD_RD_ECS_REG 0x14 -+#define IX_NPEDL_EXCTL_CMD_WR_ECS_REG 0x15 -+ -+#define IX_NPEDL_EXCTL_STATUS_RUN 0x80000000 -+#define IX_NPEDL_EXCTL_STATUS_STOP 0x40000000 -+#define IX_NPEDL_EXCTL_STATUS_CLEAR 0x20000000 -+ -+#define IX_NPEDL_MASK_WFIFO_VALID 0x80000000 -+#define IX_NPEDL_MASK_STAT_OFNE 0x00010000 -+#define IX_NPEDL_MASK_STAT_IFNE 0x00080000 -+ -+#define IX_NPEDL_ECS_DBG_CTXT_REG_0 0x0C -+#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0 0x04 -+#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0 0x08 -+ -+/* NPE control register bit definitions */ -+#define IX_NPEMH_NPE_CTL_OFE (1 << 16) /**< OutFifoEnable */ -+#define IX_NPEMH_NPE_CTL_IFE (1 << 17) /**< InFifoEnable */ -+#define IX_NPEMH_NPE_CTL_OFEWE (1 << 24) /**< OutFifoEnableWriteEnable */ -+#define IX_NPEMH_NPE_CTL_IFEWE (1 << 25) /**< InFifoEnableWriteEnable */ -+ -+/* NPE status register bit definitions */ -+#define IX_NPEMH_NPE_STAT_OFNE (1 << 16) /**< OutFifoNotEmpty */ -+#define IX_NPEMH_NPE_STAT_IFNF (1 << 17) /**< InFifoNotFull */ -+#define IX_NPEMH_NPE_STAT_OFNF (1 << 18) /**< OutFifoNotFull */ -+#define IX_NPEMH_NPE_STAT_IFNE (1 << 19) /**< InFifoNotEmpty */ -+#define IX_NPEMH_NPE_STAT_MBINT (1 << 20) /**< Mailbox interrupt */ -+#define IX_NPEMH_NPE_STAT_IFINT (1 << 21) /**< InFifo interrupt */ -+#define IX_NPEMH_NPE_STAT_OFINT (1 << 22) /**< OutFifo interrupt */ -+#define IX_NPEMH_NPE_STAT_WFINT (1 << 23) /**< WatchFifo interrupt */ -+ -+#endif -+ -Index: linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/platform.h -=================================================================== ---- linux-2.6.21-rc1-arm.orig/include/asm-arm/arch-ixp4xx/platform.h 2007-02-21 02:24:18.000000000 -0800 -+++ linux-2.6.21-rc1-arm/include/asm-arm/arch-ixp4xx/platform.h 2007-02-21 02:24:35.000000000 -0800 -@@ -86,6 +86,25 @@ - unsigned long scl_pin; - }; - -+struct npe_plat_data { -+ const char *name; -+ int data_size; -+ int inst_size; -+ int id; /* Node ID */ -+}; -+ -+struct mac_plat_info { -+ int npe_id; /* Node ID of the NPE for this port */ -+ int port_id; /* Port ID for NPE-B @ ixp465 */ -+ int eth_id; /* Physical ID */ -+ int phy_id; /* ID of the connected PHY (PCB/platform dependent) */ -+ int rxq_id; /* Queue ID of the RX-free q */ -+ int rxdoneq_id; /* where incoming packets are returned */ -+ int txq_id; /* Where to push the outgoing packets */ -+ unsigned char hwaddr[6]; /* Desired hardware address */ -+ -+}; -+ - /* - * This structure provide a means for the board setup code - * to give information to th pata_ixp4xx driver. It is -Index: linux-2.6.21-rc1-arm/include/linux/ixp_crypto.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/include/linux/ixp_crypto.h 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,192 @@ -+ -+#ifndef IX_CRYPTO_H -+#define IX_CRYPTO_H -+ -+#define MAX_KEYLEN 64 -+#define NPE_CTX_LEN 80 -+#define AES_BLOCK128 16 -+ -+#define NPE_OP_HASH_GEN_ICV 0x50 -+#define NPE_OP_ENC_GEN_KEY 0xc9 -+ -+ -+#define NPE_OP_HASH_VERIFY 0x01 -+#define NPE_OP_CCM_ENABLE 0x04 -+#define NPE_OP_CRYPT_ENABLE 0x08 -+#define NPE_OP_HASH_ENABLE 0x10 -+#define NPE_OP_NOT_IN_PLACE 0x20 -+#define NPE_OP_HMAC_DISABLE 0x40 -+#define NPE_OP_CRYPT_ENCRYPT 0x80 -+ -+#define MOD_ECB 0x0000 -+#define MOD_CTR 0x1000 -+#define MOD_CBC_ENC 0x2000 -+#define MOD_CBC_DEC 0x3000 -+#define MOD_CCM_ENC 0x4000 -+#define MOD_CCM_DEC 0x5000 -+ -+#define ALGO_AES 0x0800 -+#define CIPH_DECR 0x0000 -+#define CIPH_ENCR 0x0400 -+ -+#define MOD_DES 0x0000 -+#define MOD_TDEA2 0x0100 -+#define MOD_TDEA3 0x0200 -+#define MOD_AES128 0x0000 -+#define MOD_AES192 0x0100 -+#define MOD_AES256 0x0200 -+ -+#define KEYLEN_128 4 -+#define KEYLEN_192 6 -+#define KEYLEN_256 8 -+ -+#define CIPHER_TYPE_NULL 0 -+#define CIPHER_TYPE_DES 1 -+#define CIPHER_TYPE_3DES 2 -+#define CIPHER_TYPE_AES 3 -+ -+#define CIPHER_MODE_ECB 1 -+#define CIPHER_MODE_CTR 2 -+#define CIPHER_MODE_CBC 3 -+#define CIPHER_MODE_CCM 4 -+ -+#define HASH_TYPE_NULL 0 -+#define HASH_TYPE_MD5 1 -+#define HASH_TYPE_SHA1 2 -+#define HASH_TYPE_CBCMAC 3 -+ -+#define OP_REG_DONE 1 -+#define OP_REGISTER 2 -+#define OP_PERFORM 3 -+ -+#define STATE_UNREGISTERED 0 -+#define STATE_REGISTERED 1 -+#define STATE_UNLOADING 2 -+ -+struct crypt_ctl { -+#ifndef CONFIG_NPE_ADDRESS_COHERENT -+ u8 mode; /* NPE operation */ -+ u8 init_len; -+ u16 reserved; -+#else -+ u16 reserved; -+ u8 init_len; -+ u8 mode; /* NPE operation */ -+#endif -+ u8 iv[16]; /* IV for CBC mode or CTR IV for CTR mode */ -+ union { -+ u32 icv; -+ u32 rev_aes; -+ } addr; -+ u32 src_buf; -+ u32 dest_buf; -+#ifndef CONFIG_NPE_ADDRESS_COHERENT -+ u16 auth_offs; /* Authentication start offset */ -+ u16 auth_len; /* Authentication data length */ -+ u16 crypt_offs; /* Cryption start offset */ -+ u16 crypt_len; /* Cryption data length */ -+#else -+ u16 auth_len; /* Authentication data length */ -+ u16 auth_offs; /* Authentication start offset */ -+ u16 crypt_len; /* Cryption data length */ -+ u16 crypt_offs; /* Cryption start offset */ -+#endif -+ u32 aadAddr; /* Additional Auth Data Addr for CCM mode */ -+ u32 crypto_ctx; /* NPE Crypto Param structure address */ -+ -+ /* Used by Host */ -+ struct ix_sa_ctx *sa_ctx; -+ int oper_type; -+}; -+ -+struct npe_crypt_cont { -+ union { -+ struct crypt_ctl crypt; -+ u8 rev_aes_key[NPE_CTX_LEN]; -+ } ctl; -+ struct npe_crypt_cont *next; -+ struct npe_crypt_cont *virt; -+ dma_addr_t phys; -+}; -+ -+struct ix_hash_algo { -+ char *name; -+ u32 cfgword; -+ int digest_len; -+ int aad_len; -+ unsigned char *icv; -+ int type; -+}; -+ -+struct ix_cipher_algo { -+ char *name; -+ u32 cfgword_enc; -+ u32 cfgword_dec; -+ int block_len; -+ int iv_len; -+ int type; -+ int mode; -+}; -+ -+struct ix_key { -+ u8 key[MAX_KEYLEN]; -+ int len; -+}; -+ -+struct ix_sa_master { -+ struct device *npe_dev; -+ struct qm_queue *sendq; -+ struct qm_queue *recvq; -+ struct dma_pool *dmapool; -+ struct npe_crypt_cont *pool; -+ int pool_size; -+ rwlock_t lock; -+}; -+ -+struct ix_sa_dir { -+ unsigned char *npe_ctx; -+ dma_addr_t npe_ctx_phys; -+ int npe_ctx_idx; -+ u8 npe_mode; -+}; -+ -+struct ix_sa_ctx { -+ struct list_head list; -+ struct ix_sa_master *master; -+ -+ const struct ix_hash_algo *h_algo; -+ const struct ix_cipher_algo *c_algo; -+ struct ix_key c_key; -+ struct ix_key h_key; -+ -+ int digest_len; -+ -+ struct ix_sa_dir encrypt; -+ struct ix_sa_dir decrypt; -+ -+ struct npe_crypt_cont *rev_aes; -+ gfp_t gfp_flags; -+ -+ int state; -+ void *priv; -+ -+ void(*reg_cb)(struct ix_sa_ctx*, int); -+ void(*perf_cb)(struct ix_sa_ctx*, void*, int); -+ atomic_t use_cnt; -+}; -+ -+const struct ix_hash_algo *ix_hash_by_id(int type); -+const struct ix_cipher_algo *ix_cipher_by_id(int type, int mode); -+ -+struct ix_sa_ctx *ix_sa_ctx_new(int priv_len, gfp_t flags); -+void ix_sa_ctx_free(struct ix_sa_ctx *sa_ctx); -+ -+int ix_sa_crypto_perform(struct ix_sa_ctx *sa_ctx, u8 *data, void *ptr, -+ int datalen, int c_offs, int c_len, int a_offs, int a_len, -+ int hmac, char *iv, int encrypt); -+ -+int ix_sa_ctx_setup_cipher_auth(struct ix_sa_ctx *sa_ctx, -+ const struct ix_cipher_algo *cipher, -+ const struct ix_hash_algo *auth, int len); -+ -+#endif -Index: linux-2.6.21-rc1-arm/include/linux/ixp_npe.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/include/linux/ixp_npe.h 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,117 @@ -+/* -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+#ifndef NPE_DEVICE_H -+#define NPE_DEVICE_H -+ -+#include <linux/miscdevice.h> -+#include <asm/hardware.h> -+ -+#ifdef __ARMEB__ -+#undef CONFIG_NPE_ADDRESS_COHERENT -+#else -+#define CONFIG_NPE_ADDRESS_COHERENT -+#endif -+ -+#if defined(__ARMEB__) || defined (CONFIG_NPE_ADDRESS_COHERENT) -+#define npe_to_cpu32(x) (x) -+#define npe_to_cpu16(x) (x) -+#define cpu_to_npe32(x) (x) -+#define cpu_to_npe16(x) (x) -+#else -+#error NPE_DATA_COHERENT -+#define NPE_DATA_COHERENT -+#define npe_to_cpu32(x) be32_to_cpu(x) -+#define npe_to_cpu16(x) be16_to_cpu(x) -+#define cpu_to_npe32(x) cpu_to_be32(x) -+#define cpu_to_npe16(x) cpu_to_be16(x) -+#endif -+ -+ -+struct npe_info { -+ struct resource *res; -+ void __iomem *addr; -+ struct npe_plat_data *plat; -+ u8 img_info[4]; -+ int usage; -+ int loaded; -+ u32 exec_count; -+ u32 ctx_reg2; -+}; -+ -+ -+static inline void npe_reg_write(struct npe_info *npe, u32 reg, u32 val) -+{ -+ *(volatile u32*)((u8*)(npe->addr) + reg) = val; -+} -+ -+static inline u32 npe_reg_read(struct npe_info *npe, u32 reg) -+{ -+ return *(volatile u32*)((u8*)(npe->addr) + reg); -+} -+ -+static inline u32 npe_status(struct npe_info *npe) -+{ -+ return npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXCTL); -+} -+ -+/* ixNpeDlNpeMgrCommandIssue */ -+static inline void npe_write_exctl(struct npe_info *npe, u32 cmd) -+{ -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd); -+} -+/* ixNpeDlNpeMgrWriteCommandIssue */ -+static inline void -+npe_write_cmd(struct npe_info *npe, u32 addr, u32 data, int cmd) -+{ -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXDATA, data); -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXAD, addr); -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd); -+} -+/* ixNpeDlNpeMgrReadCommandIssue */ -+static inline u32 -+npe_read_cmd(struct npe_info *npe, u32 addr, int cmd) -+{ -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXAD, addr); -+ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd); -+ /* Intel reads the data twice - so do we... */ -+ npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXDATA); -+ return npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXDATA); -+} -+ -+/* ixNpeDlNpeMgrExecAccRegWrite */ -+static inline void npe_write_ecs_reg(struct npe_info *npe, u32 addr, u32 data) -+{ -+ npe_write_cmd(npe, addr, data, IX_NPEDL_EXCTL_CMD_WR_ECS_REG); -+} -+/* ixNpeDlNpeMgrExecAccRegRead */ -+static inline u32 npe_read_ecs_reg(struct npe_info *npe, u32 addr) -+{ -+ return npe_read_cmd(npe, addr, IX_NPEDL_EXCTL_CMD_RD_ECS_REG); -+} -+ -+extern void npe_stop(struct npe_info *npe); -+extern void npe_start(struct npe_info *npe); -+extern void npe_reset(struct npe_info *npe); -+ -+extern struct device *get_npe_by_id(int id); -+extern void return_npe_dev(struct device *dev); -+ -+/* NPE Messages */ -+extern int -+npe_mh_status(struct npe_info *npe); -+extern int -+npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp, u8 *macaddr); -+extern int -+npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp); -+extern int -+npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid); -+extern int -+npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp, int enable); -+extern int -+npe_mh_get_stats(struct npe_info *npe, struct mac_plat_info *mp, u32 phys, int reset); -+ -+#endif -Index: linux-2.6.21-rc1-arm/include/linux/ixp_qmgr.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/include/linux/ixp_qmgr.h 2007-02-21 02:24:35.000000000 -0800 -@@ -0,0 +1,202 @@ -+/* -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+#ifndef IX_QMGR_H -+#define IX_QMGR_H -+ -+#include <linux/skbuff.h> -+#include <linux/list.h> -+#include <linux/if_ether.h> -+#include <linux/spinlock.h> -+#include <linux/platform_device.h> -+#include <linux/ixp_npe.h> -+#include <asm/atomic.h> -+ -+/* All offsets are in 32bit words */ -+#define QUE_LOW_STAT0 0x100 /* 4x Status of the 32 lower queues 0-31 */ -+#define QUE_UO_STAT0 0x104 /* 2x Underflow/Overflow status bits*/ -+#define QUE_UPP_STAT0 0x106 /* 2x Status of thew 32 upper queues 32-63 */ -+#define INT0_SRC_SELREG0 0x108 /* 4x */ -+#define QUE_IE_REG0 0x10c /* 2x */ -+#define QUE_INT_REG0 0x10e /* 2x IRQ reg, write 1 to reset IRQ */ -+ -+#define IX_QMGR_QCFG_BASE 0x800 -+#define IX_QMGR_QCFG_SIZE 0x40 -+#define IX_QMGR_SRAM_SPACE (IX_QMGR_QCFG_BASE + IX_QMGR_QCFG_SIZE) -+ -+#define MAX_QUEUES 32 /* first, we only support the lower 32 queues */ -+#define MAX_NPES 3 -+ -+enum { -+ Q_IRQ_ID_E = 0, /* Queue Empty due to last read */ -+ Q_IRQ_ID_NE, /* Queue Nearly Empty due to last read */ -+ Q_IRQ_ID_NF, /* Queue Nearly Full due to last write */ -+ Q_IRQ_ID_F, /* Queue Full due to last write */ -+ Q_IRQ_ID_NOT_E, /* Queue Not Empty due to last write */ -+ Q_IRQ_ID_NOT_NE, /* Queue Not Nearly Empty due to last write */ -+ Q_IRQ_ID_NOT_NF, /* Queue Not Nearly Full due to last read */ -+ Q_IRQ_ID_NOT_F /* Queue Not Full due to last read */ -+}; -+ -+extern struct qm_queue *request_queue(int qid, int len); -+extern void release_queue(struct qm_queue *queue); -+extern int queue_set_irq_src(struct qm_queue *queue, int flag); -+extern void queue_set_watermarks(struct qm_queue *, unsigned ne, unsigned nf); -+extern int queue_len(struct qm_queue *queue); -+ -+struct qm_qmgr; -+struct qm_queue; -+ -+typedef void(*queue_cb)(struct qm_queue *); -+ -+struct qm_queue { -+ int addr; /* word offset from IX_QMGR_SRAM_SPACE */ -+ int len; /* size in words */ -+ int id; /* Q Id */ -+ u32 __iomem *acc_reg; -+ struct device *dev; -+ atomic_t use; -+ queue_cb irq_cb; -+ void *cb_data; -+}; -+ -+#ifndef CONFIG_NPE_ADDRESS_COHERENT -+struct eth_ctl { -+ u32 next; -+ u16 buf_len; -+ u16 pkt_len; -+ u32 phys_addr; -+ u8 dest_id; -+ u8 src_id; -+ u16 flags; -+ u8 qos; -+ u8 padlen; -+ u16 vlan_tci; -+ u8 dest_mac[ETH_ALEN]; -+ u8 src_mac[ETH_ALEN]; -+}; -+ -+#else -+struct eth_ctl { -+ u32 next; -+ u16 pkt_len; -+ u16 buf_len; -+ u32 phys_addr; -+ u16 flags; -+ u8 src_id; -+ u8 dest_id; -+ u16 vlan_tci; -+ u8 padlen; -+ u8 qos; -+ u8 dest_mac[ETH_ALEN]; -+ u8 src_mac[ETH_ALEN]; -+}; -+#endif -+ -+struct npe_cont { -+ struct eth_ctl eth; -+ void *data; -+ struct npe_cont *next; -+ struct npe_cont *virt; -+ dma_addr_t phys; -+}; -+ -+struct qm_qmgr { -+ u32 __iomem *addr; -+ struct resource *res; -+ struct qm_queue *queues[MAX_QUEUES]; -+ rwlock_t lock; -+ struct npe_cont *pool; -+ struct dma_pool *dmapool; -+ int irq; -+}; -+ -+static inline void queue_write_cfg_reg(struct qm_queue *queue, u32 val) -+{ -+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); -+ *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id) = val; -+} -+static inline u32 queue_read_cfg_reg(struct qm_queue *queue) -+{ -+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); -+ return *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id); -+} -+ -+static inline void queue_ack_irq(struct qm_queue *queue) -+{ -+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); -+ *(qmgr->addr + QUE_INT_REG0) = 1 << queue->id; -+} -+ -+static inline void queue_enable_irq(struct qm_queue *queue) -+{ -+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); -+ *(qmgr->addr + QUE_IE_REG0) |= 1 << queue->id; -+} -+ -+static inline void queue_disable_irq(struct qm_queue *queue) -+{ -+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); -+ *(qmgr->addr + QUE_IE_REG0) &= ~(1 << queue->id); -+} -+ -+static inline void queue_put_entry(struct qm_queue *queue, u32 entry) -+{ -+ *(queue->acc_reg) = npe_to_cpu32(entry); -+} -+ -+static inline u32 queue_get_entry(struct qm_queue *queue) -+{ -+ return cpu_to_npe32(*queue->acc_reg); -+} -+ -+static inline struct npe_cont *qmgr_get_cont(struct qm_qmgr *qmgr) -+{ -+ unsigned long flags; -+ struct npe_cont *cont; -+ -+ if (!qmgr->pool) -+ return NULL; -+ write_lock_irqsave(&qmgr->lock, flags); -+ cont = qmgr->pool; -+ qmgr->pool = cont->next; -+ write_unlock_irqrestore(&qmgr->lock, flags); -+ return cont; -+} -+ -+static inline void qmgr_return_cont(struct qm_qmgr *qmgr,struct npe_cont *cont) -+{ -+ unsigned long flags; -+ -+ write_lock_irqsave(&qmgr->lock, flags); -+ cont->next = qmgr->pool; -+ qmgr->pool = cont; -+ write_unlock_irqrestore(&qmgr->lock, flags); -+} -+ -+static inline int queue_stat(struct qm_queue *queue) -+{ -+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); -+ u32 reg = *(qmgr->addr + QUE_UO_STAT0 + (queue->id >> 4)); -+ return (reg >> (queue->id & 0xf) << 1) & 3; -+} -+ -+/* Prints the queue state, which is very, very helpfull for debugging */ -+static inline void queue_state(struct qm_queue *queue) -+{ -+ u32 val=0, lstat=0; -+ int offs; -+ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev); -+ -+ offs = queue->id/8 + QUE_LOW_STAT0; -+ val = *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id); -+ lstat = (*(qmgr->addr + offs) >> ((queue->id % 8)*4)) & 0x0f; -+ -+ printk("Qid[%02d]: Wptr=%4x, Rptr=%4x, diff=%4x, Stat:%x\n", queue->id, -+ val&0x7f, (val>>7) &0x7f, (val - (val >> 7)) & 0x7f, lstat); -+} -+ -+#endif diff --git a/target/linux/ixp4xx-2.6/patches/110-ixp4xx_net_driver_fix_mac_handling.patch b/target/linux/ixp4xx-2.6/patches/110-ixp4xx_net_driver_fix_mac_handling.patch deleted file mode 100644 index 1050702d88..0000000000 --- a/target/linux/ixp4xx-2.6/patches/110-ixp4xx_net_driver_fix_mac_handling.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- - drivers/net/ixp4xx/mac_driver.c | 24 ++++++++++-------------- - 1 file changed, 10 insertions(+), 14 deletions(-) - -Index: linux-2.6.21-rc4-git6-arm/drivers/net/ixp4xx/mac_driver.c -=================================================================== ---- linux-2.6.21-rc4-git6-arm.orig/drivers/net/ixp4xx/mac_driver.c 2007-03-22 10:32:20.735684085 +0000 -+++ linux-2.6.21-rc4-git6-arm/drivers/net/ixp4xx/mac_driver.c 2007-03-22 10:33:29.355972584 +0000 -@@ -842,7 +842,7 @@ - } - } - --module_init(init_mac); -+late_initcall(init_mac); - module_exit(finish_mac); - - MODULE_LICENSE("GPL"); diff --git a/target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch b/target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch deleted file mode 100644 index ef53155c03..0000000000 --- a/target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch +++ /dev/null @@ -1,392 +0,0 @@ ---- - drivers/net/ixp4xx/Kconfig | 10 + - drivers/net/ixp4xx/Makefile | 1 - drivers/net/ixp4xx/npe_ucode.c | 185 +++++++++++++++++++++++++++++++++ - drivers/net/ixp4xx/ucode_dl.c | 43 ++++--- - include/asm-arm/arch-ixp4xx/platform.h | 19 +++ - include/linux/ixp_npe.h | 1 - 6 files changed, 239 insertions(+), 20 deletions(-) - -Index: linux-2.6.20-rc3/drivers/net/ixp4xx/Kconfig -=================================================================== ---- linux-2.6.20-rc3.orig/drivers/net/ixp4xx/Kconfig -+++ linux-2.6.20-rc3/drivers/net/ixp4xx/Kconfig -@@ -11,6 +11,7 @@ - tristate "IXP4xx NPE support" - depends on ARCH_IXP4XX - depends on NET_ETHERNET -+ select CRC16 - help - The IXP4XX NPE driver supports the 3 CPU co-processors called - "Network Processing Engines" (NPE). It adds support fo downloading -@@ -18,7 +19,7 @@ - More about this at: Documentation/networking/ixp4xx/README. - You can either use this OR the Intel Access Library (IAL) - --config IXP4XX_FW_LOAD -+config IXP4XX_NPE_FW_LOAD - bool "Use Firmware hotplug for Microcode download" - depends on IXP4XX_NPE - select HOTPLUG -@@ -28,6 +29,13 @@ - /usr/lib/hotplug/firmware/NPE-[ABC] - see Documentation/firmware_class/hotplug-script - -+config IXP4XX_NPE_FW_MTD -+ bool "Load firmware from an mtd partition" -+ depends on IXP4XX_NPE && MTD_IXP4XX -+ help -+ With this option, the driver will search for -+ the firmware into an MTD partition. -+ - config IXP4XX_MAC - tristate "IXP4xx MAC support" - depends on IXP4XX_NPE -Index: linux-2.6.20-rc3/drivers/net/ixp4xx/Makefile -=================================================================== ---- linux-2.6.20-rc3.orig/drivers/net/ixp4xx/Makefile -+++ linux-2.6.20-rc3/drivers/net/ixp4xx/Makefile -@@ -1,5 +1,6 @@ - obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o - obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o -+obj-$(CONFIG_IXP4XX_NPE_FW_MTD) += npe_ucode.o - obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o - obj-$(CONFIG_IXP4XX_CRYPTO) += ixp4xx_crypto.o - -Index: linux-2.6.20-rc3/drivers/net/ixp4xx/npe_ucode.c -=================================================================== ---- /dev/null -+++ linux-2.6.20-rc3/drivers/net/ixp4xx/npe_ucode.c -@@ -0,0 +1,185 @@ -+/* -+ * Provide an NPE platform device for microcode handling -+ * -+ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com> -+ * -+ * This file is released under the GPLv2 -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/firmware.h> -+#include <linux/mtd/mtd.h> -+ -+#include <linux/ixp_npe.h> -+ -+#define DL_MAGIC 0xfeedf00d -+#define DL_MAGIC_SWAP 0x0df0edfe -+ -+#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \ -+ sizeof(struct dl_image)) -+ -+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f) -+#define IMG_REV_MINOR(id) ((id) & 0x0f) -+#define IMG_FUNC(id) (((id) >> 16) & 0xff) -+#define IMG_NPE(id) (((id) >> 24) & 0x0f) -+#define IMG_IXP(id) (((id) >> 28) & 0x0f) -+ -+static struct platform_driver ixp4xx_npe_ucode_driver; -+static unsigned char *partition_name = NULL; -+ -+static void print_image_info(u32 id, u32 offset, u32 size) -+{ -+ unsigned char idx; -+ const char *names[] = { "IXP425", "IXP465", "unknown" }; -+ -+ idx = IMG_IXP(id) < 2 ? IMG_IXP(id) : 2; -+ -+ printk(KERN_INFO "npe: found at 0x%x, %s/NPE-%c func: %02x, rev: %x.%x, " -+ "size: %5d, id: %08x\n", offset, names[idx], IMG_NPE(id) + 'A', -+ IMG_FUNC(id), IMG_REV_MAJOR(id), IMG_REV_MINOR(id), size, id); -+} -+ -+void npe_swap_image(struct dl_image *image) -+{ -+ unsigned int i; -+ -+ image->magic = swab32(image->magic); -+ image->id = swab32(image->id); -+ image->size = swab32(image->size); -+ -+ for (i = 0; i < image->size; i++) -+ image->u.data[i] = swab32(image->u.data[i]); -+} -+ -+static void npe_find_microcode(struct mtd_info *mtd) -+{ -+ u32 buf; -+ u32 magic = htonl(DL_MAGIC); -+ u32 id, size; -+ size_t retlen; -+ int err; -+ unsigned int offset = 0; -+ -+ printk("npe: searching for firmware...\n"); -+ -+ while (offset < mtd->size) { -+ -+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &buf); -+ offset += retlen; -+ -+ if (buf != magic) -+ continue; -+ -+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &id); -+ offset += retlen; -+ -+ if (id == magic) -+ break; -+ -+ id = ntohl(id); -+ -+ err = mtd->read(mtd, offset, 4, &retlen, (u_char *) &size); -+ offset += retlen; -+ -+ size = (ntohl(size) * 4) + 12; -+ -+ print_image_info(id, offset - 12, size); -+ -+ if (size < 24000 && ( IMG_FUNC(id) == 0x01 || IMG_FUNC(id) == 0x00) || IMG_FUNC(id) == 0x05 ) { // XXX fix size/detection -+ -+ struct dl_image *image = kmalloc(size, GFP_KERNEL); -+ -+ /* we are going to load it, rewind offset */ -+ offset -= 12; -+ -+ if (image) { -+ err = mtd->read(mtd, offset, size, &retlen, (u_char *) image); -+ -+ if (err == 0 && retlen == size) { -+ if (image->magic == DL_MAGIC_SWAP) -+ npe_swap_image(image); -+ -+ store_npe_image(image, NULL); -+ } else { -+ printk(KERN_ERR "unable to read firmware\n"); -+ } -+ -+ kfree(image); -+ } -+ -+ offset += size; -+ } -+ } -+} -+ -+static void npe_flash_add(struct mtd_info *mtd) -+{ -+ if (partition_name == NULL) -+ return; -+ -+ if (strcmp(mtd->name, partition_name) == 0) { -+ npe_find_microcode(mtd); -+ } -+} -+ -+static void npe_flash_remove(struct mtd_info *mtd) { -+} -+ -+static struct mtd_notifier npe_flash_notifier = { -+ .add = npe_flash_add, -+ .remove = npe_flash_remove, -+}; -+ -+static int npe_ucode_probe(struct platform_device *pdev) -+{ -+ struct npe_ucode_platform_data *data = pdev->dev.platform_data; -+ -+ if (partition_name) -+ return -EEXIST; -+ -+ if (data && data->mtd_partition) { -+ partition_name = data->mtd_partition; -+ return 0; -+ } -+ -+ return -EINVAL; -+} -+ -+static int npe_ucode_remove(struct platform_device *pdev) -+{ -+ return 0; -+} -+ -+static struct platform_driver ixp4xx_npe_ucode_driver = { -+ .driver = { -+ .name = "ixp4xx_npe_ucode", -+ .owner = THIS_MODULE, -+ }, -+ .probe = npe_ucode_probe, -+ .remove = npe_ucode_remove, -+}; -+ -+static int __init npe_ucode_init(void) -+{ -+ int ret; -+ -+ ret = platform_driver_register(&ixp4xx_npe_ucode_driver); -+ register_mtd_user(&npe_flash_notifier); -+ -+ return ret; -+} -+ -+static void __exit npe_ucode_exit(void) -+{ -+ unregister_mtd_user(&npe_flash_notifier); -+ platform_driver_unregister(&ixp4xx_npe_ucode_driver); -+} -+ -+module_init(npe_ucode_init); -+module_exit(npe_ucode_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); -Index: linux-2.6.20-rc3/drivers/net/ixp4xx/ucode_dl.c -=================================================================== ---- linux-2.6.20-rc3.orig/drivers/net/ixp4xx/ucode_dl.c -+++ linux-2.6.20-rc3/drivers/net/ixp4xx/ucode_dl.c -@@ -16,6 +16,7 @@ - #include <linux/firmware.h> - #include <linux/dma-mapping.h> - #include <linux/byteorder/swab.h> -+#include <linux/crc16.h> - #include <asm/uaccess.h> - #include <asm/io.h> - -@@ -26,6 +27,12 @@ - #define DL_MAGIC 0xfeedf00d - #define DL_MAGIC_SWAP 0x0df0edfe - -+#define IMG_REV_MAJOR(id) (((id) >> 8) & 0x0f) -+#define IMG_REV_MINOR(id) ((id) & 0x0f) -+#define IMG_FUNC(id) (((id) >> 16) & 0xff) -+#define IMG_NPE(id) (((id) >> 24) & 0x0f) -+#define IMG_IXP(id) (((id) >> 28) & 0x0f) -+ - #define EOF_BLOCK 0xf - #define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \ - sizeof(struct dl_image)) -@@ -38,21 +45,6 @@ - data, - }; - --struct dl_block { -- u32 type; -- u32 offset; --}; -- --struct dl_image { -- u32 magic; -- u32 id; -- u32 size; -- union { -- u32 data[0]; -- struct dl_block block[0]; -- } u; --}; -- - struct dl_codeblock { - u32 npe_addr; - u32 size; -@@ -127,20 +119,33 @@ - return 0; - } - --static int store_npe_image(struct dl_image *image, struct device *dev) -+int store_npe_image(struct dl_image *image, struct device *dev) - { - struct dl_block *blk; - struct dl_codeblock *cb; - struct npe_info *npe; - int ret=0; -+ u16 crc; - - if (!dev) { -- dev = get_npe_by_id( (image->id >> 24) & 0xf); -+ dev = get_npe_by_id(IMG_NPE(image->id)); - return_npe_dev(dev); - } - if (!dev) - return -ENODEV; - -+ if (image->size > 24000) { // XXX fix max size -+ printk(KERN_ERR "npe: firmware too large\n"); -+ return -EFBIG; -+ } -+ -+ if (IMG_REV_MAJOR(image->id) != 2) { -+ printk(KERN_ERR "npe: only revision 2 is supported at this time\n"); -+ return -EINVAL; -+ } -+ -+ crc = crc16(0, (u8 *) image, IMG_SIZE(image)); -+ - npe = dev_get_drvdata(dev); - if (npe->loaded && (npe->usage > 0)) { - printk(KERN_INFO "Cowardly refusing to reload an Image " -@@ -267,8 +272,7 @@ - - static void npe_firmware_probe(struct device *dev) - { --#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \ -- && defined(MODULE) -+#ifdef CONFIG_IXP4XX_NPE_FW_LOADER - const struct firmware *fw_entry; - struct npe_info *npe = dev_get_drvdata(dev); - struct dl_image *image; -@@ -477,3 +481,4 @@ - - EXPORT_SYMBOL(get_npe_by_id); - EXPORT_SYMBOL(return_npe_dev); -+EXPORT_SYMBOL(store_npe_image); -Index: linux-2.6.20-rc3/include/asm-arm/arch-ixp4xx/platform.h -=================================================================== ---- linux-2.6.20-rc3.orig/include/asm-arm/arch-ixp4xx/platform.h -+++ linux-2.6.20-rc3/include/asm-arm/arch-ixp4xx/platform.h -@@ -86,6 +86,21 @@ - unsigned long scl_pin; - }; - -+struct dl_block { -+ u32 type; -+ u32 offset; -+}; -+ -+struct dl_image { -+ u32 magic; -+ u32 id; -+ u32 size; -+ union { -+ u32 data[0]; -+ struct dl_block block[0]; -+ } u; -+}; -+ - struct npe_plat_data { - const char *name; - int data_size; -@@ -105,6 +120,10 @@ - - }; - -+struct npe_ucode_platform_data { -+ unsigned char *mtd_partition; -+}; -+ - /* - * This structure provide a means for the board setup code - * to give information to th pata_ixp4xx driver. It is -Index: linux-2.6.20-rc3/include/linux/ixp_npe.h -=================================================================== ---- linux-2.6.20-rc3.orig/include/linux/ixp_npe.h -+++ linux-2.6.20-rc3/include/linux/ixp_npe.h -@@ -99,6 +99,7 @@ - - extern struct device *get_npe_by_id(int id); - extern void return_npe_dev(struct device *dev); -+extern int store_npe_image(struct dl_image *image, struct device *dev); - - /* NPE Messages */ - extern int diff --git a/target/linux/ixp4xx-2.6/patches/140-ixp4xx_net_driver_no_phy.patch b/target/linux/ixp4xx-2.6/patches/140-ixp4xx_net_driver_no_phy.patch deleted file mode 100644 index 4bd6875e9d..0000000000 --- a/target/linux/ixp4xx-2.6/patches/140-ixp4xx_net_driver_no_phy.patch +++ /dev/null @@ -1,73 +0,0 @@ -diff -Nur linux-2.6.19.2/drivers/net/ixp4xx/mac_driver.c linux-2.6.19.2-owrt/drivers/net/ixp4xx/mac_driver.c ---- linux-2.6.19.2/drivers/net/ixp4xx/mac_driver.c 2007-04-15 14:26:54.000000000 +0200 -+++ linux-2.6.19.2-owrt/drivers/net/ixp4xx/mac_driver.c 2007-04-15 14:33:44.000000000 +0200 -@@ -161,6 +161,16 @@ - { - struct mac_info *mac = netdev_priv(dev); - -+ if ( mac->mii.phy_id < 0 ) { -+ if ( init ) { -+ netif_carrier_on(mac->mii.dev); -+ mac->mii.full_duplex = 1; -+ update_duplex_mode(dev); -+ return 1; -+ } -+ return 0; -+ } -+ - if (mii_check_media(&mac->mii, netif_msg_link(mac), init)) { - update_duplex_mode(dev); - return 1; -@@ -458,7 +468,12 @@ - return -EINVAL; - if (!try_module_get(THIS_MODULE)) - return -ENODEV; -- rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed); -+ if ( mac->mii.phy_id < 0 ) { -+ duplex_changed = 0; -+ rc = -EOPNOTSUPP; -+ } else { -+ rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed); -+ } - module_put(THIS_MODULE); - if (duplex_changed) - update_duplex_mode(dev); -@@ -488,6 +503,9 @@ - static int ixmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) - { - struct mac_info *mac = netdev_priv(dev); -+ if ( mac->mii.phy_id < 0 ) { -+ return 0; -+ } - mii_ethtool_gset(&mac->mii, cmd); - return 0; - } -@@ -496,6 +514,9 @@ - { - struct mac_info *mac = netdev_priv(dev); - int rc; -+ if ( mac->mii.phy_id < 0 ) { -+ return -EOPNOTSUPP; -+ } - rc = mii_ethtool_sset(&mac->mii, cmd); - return rc; - } -@@ -503,12 +524,18 @@ - static int ixmac_nway_reset(struct net_device *dev) - { - struct mac_info *mac = netdev_priv(dev); -+ if ( mac->mii.phy_id < 0 ) { -+ return -EOPNOTSUPP; -+ } - return mii_nway_restart(&mac->mii); - } - - static u32 ixmac_get_link(struct net_device *dev) - { - struct mac_info *mac = netdev_priv(dev); -+ if ( mac->mii.phy_id < 0 ) { -+ return 1; -+ } - return mii_link_ok(&mac->mii); - } - diff --git a/target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch b/target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch deleted file mode 100644 index cada1bd544..0000000000 --- a/target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch +++ /dev/null @@ -1,42 +0,0 @@ -Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c -+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c -@@ -137,6 +137,29 @@ static struct platform_device nslu2_uart - .resource = nslu2_uart_resources, - }; - -+static struct resource res_mac0 = { -+ .start = IXP4XX_EthB_BASE_PHYS, -+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct mac_plat_info plat_mac0 = { -+ .npe_id = 1, -+ .phy_id = 1, -+ .eth_id = 0, -+ .rxq_id = 27, -+ .txq_id = 24, -+ .rxdoneq_id = 4, -+}; -+ -+static struct platform_device mac0 = { -+ .name = "ixp4xx_mac", -+ .id = 0, -+ .dev.platform_data = &plat_mac0, -+ .num_resources = 1, -+ .resource = &res_mac0, -+}; -+ - static struct platform_device *nslu2_devices[] __initdata = { - &nslu2_i2c_controller, - &nslu2_flash, -@@ -144,6 +166,7 @@ static struct platform_device *nslu2_dev - #ifdef CONFIG_LEDS_IXP4XX - &nslu2_leds, - #endif -+ &mac0 - }; - - static void nslu2_power_off(void) diff --git a/target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch b/target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch deleted file mode 100644 index 9256324b10..0000000000 --- a/target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch +++ /dev/null @@ -1,41 +0,0 @@ -Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c -+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c -@@ -123,12 +123,36 @@ static struct platform_device nas100d_ua - .resource = nas100d_uart_resources, - }; - -+static struct resource res_mac0 = { -+ .start = IXP4XX_EthB_BASE_PHYS, -+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct mac_plat_info plat_mac0 = { -+ .npe_id = 1, -+ .phy_id = 0, -+ .eth_id = 0, -+ .rxq_id = 27, -+ .txq_id = 24, -+ .rxdoneq_id = 4, -+}; -+ -+static struct platform_device mac0 = { -+ .name = "ixp4xx_mac", -+ .id = 0, -+ .dev.platform_data = &plat_mac0, -+ .num_resources = 1, -+ .resource = &res_mac0, -+}; -+ - static struct platform_device *nas100d_devices[] __initdata = { - &nas100d_i2c_controller, - &nas100d_flash, - #ifdef CONFIG_LEDS_IXP4XX - &nas100d_leds, - #endif -+ &mac0 - }; - - static void nas100d_power_off(void) diff --git a/target/linux/ixp4xx-2.6/patches/143-nslu2_mtd_microcode.patch b/target/linux/ixp4xx-2.6/patches/143-nslu2_mtd_microcode.patch deleted file mode 100644 index adf91891f8..0000000000 --- a/target/linux/ixp4xx-2.6/patches/143-nslu2_mtd_microcode.patch +++ /dev/null @@ -1,35 +0,0 @@ ---- - arch/arm/mach-ixp4xx/nslu2-setup.c | 13 ++++++++++++- - 1 file changed, 12 insertions(+), 1 deletion(-) - -Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c -+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c -@@ -159,6 +159,16 @@ static struct platform_device mac0 = { - .resource = &res_mac0, - }; - -+struct npe_ucode_platform_data nslu2_npe_ucode_data = { -+ .mtd_partition = "FIS directory", -+}; -+ -+static struct platform_device nslu2_npe_ucode = { -+ .name = "ixp4xx_npe_ucode", -+ .id = 0, -+ .dev.platform_data = &nslu2_npe_ucode_data, -+}; -+ - static struct platform_device *nslu2_devices[] __initdata = { - &nslu2_i2c_controller, - &nslu2_flash, -@@ -166,7 +176,8 @@ static struct platform_device *nslu2_dev - #ifdef CONFIG_LEDS_IXP4XX - &nslu2_leds, - #endif -- &mac0 -+ &mac0, -+ &nslu2_npe_ucode, - }; - - static void nslu2_power_off(void) diff --git a/target/linux/ixp4xx-2.6/patches/144-nas100d_mtd_microcode.patch b/target/linux/ixp4xx-2.6/patches/144-nas100d_mtd_microcode.patch deleted file mode 100644 index 0794e6fd72..0000000000 --- a/target/linux/ixp4xx-2.6/patches/144-nas100d_mtd_microcode.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- - arch/arm/mach-ixp4xx/nas100d-setup.c | 13 ++++++++++++- - 1 file changed, 12 insertions(+), 1 deletion(-) - -Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c -+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c -@@ -145,13 +145,24 @@ static struct platform_device mac0 = { - .resource = &res_mac0, - }; - -+struct npe_ucode_platform_data nas100d_npe_ucode_data = { -+ .mtd_partition = "microcode", -+}; -+ -+static struct platform_device nas100d_npe_ucode = { -+ .name = "ixp4xx_npe_ucode", -+ .id = 0, -+ .dev.platform_data = &nas100d_npe_ucode_data, -+}; -+ - static struct platform_device *nas100d_devices[] __initdata = { - &nas100d_i2c_controller, - &nas100d_flash, - #ifdef CONFIG_LEDS_IXP4XX - &nas100d_leds, - #endif -- &mac0 -+ &mac0, -+ &nas100d_npe_ucode, - }; - - static void nas100d_power_off(void) diff --git a/target/linux/ixp4xx-2.6/patches/152-nas100d_mtd_load_mac.patch b/target/linux/ixp4xx-2.6/patches/152-nas100d_mtd_load_mac.patch deleted file mode 100644 index 37368861bd..0000000000 --- a/target/linux/ixp4xx-2.6/patches/152-nas100d_mtd_load_mac.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- - arch/arm/mach-ixp4xx/nas100d-setup.c | 27 +++++++++++++++++++++++++++ - 1 file changed, 27 insertions(+) - -Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c -+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c -@@ -16,6 +16,7 @@ - #include <linux/serial.h> - #include <linux/serial_8250.h> - #include <linux/leds.h> -+#include <linux/mtd/mtd.h> - - #include <asm/mach-types.h> - #include <asm/mach/arch.h> -@@ -165,6 +166,30 @@ static struct platform_device *nas100d_d - &nas100d_npe_ucode, - }; - -+static void nas100d_flash_add(struct mtd_info *mtd) -+{ -+ if (strcmp(mtd->name, "RedBoot config") == 0) { -+ size_t retlen; -+ u_char mac[6]; -+ -+ if (mtd->read(mtd, 0x0FD8, 6, &retlen, mac) == 0 && retlen == 6) { -+ printk(KERN_INFO "nas100d mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", -+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); -+ memcpy(plat_mac0.hwaddr, mac, 6); -+ } else { -+ printk(KERN_ERR "nas100d mac: read failed\n"); -+ } -+ } -+} -+ -+static void nas100d_flash_remove(struct mtd_info *mtd) { -+} -+ -+static struct mtd_notifier nas100d_flash_notifier = { -+ .add = nas100d_flash_add, -+ .remove = nas100d_flash_remove, -+}; -+ - static void nas100d_power_off(void) - { - /* This causes the box to drop the power and go dead. */ -@@ -196,6 +221,8 @@ static void __init nas100d_init(void) - (void)platform_device_register(&nas100d_uart); - - platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); -+ -+ register_mtd_user(&nas100d_flash_notifier); - } - - MACHINE_START(NAS100D, "Iomega NAS 100d") diff --git a/target/linux/ixp4xx-2.6/patches/153-nslu2_mtd_load_mac.patch b/target/linux/ixp4xx-2.6/patches/153-nslu2_mtd_load_mac.patch deleted file mode 100644 index 21fe29a88d..0000000000 --- a/target/linux/ixp4xx-2.6/patches/153-nslu2_mtd_load_mac.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- - arch/arm/mach-ixp4xx/nslu2-setup.c | 27 +++++++++++++++++++++++++++ - 1 file changed, 27 insertions(+) - -Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c -+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c -@@ -18,6 +18,7 @@ - #include <linux/serial.h> - #include <linux/serial_8250.h> - #include <linux/leds.h> -+#include <linux/mtd/mtd.h> - - #include <asm/mach-types.h> - #include <asm/mach/arch.h> -@@ -180,6 +181,30 @@ static struct platform_device *nslu2_dev - &nslu2_npe_ucode, - }; - -+static void nslu2_flash_add(struct mtd_info *mtd) -+{ -+ if (strcmp(mtd->name, "RedBoot") == 0) { -+ size_t retlen; -+ u_char mac[6]; -+ -+ if (mtd->read(mtd, 0x3FFB0, 6, &retlen, mac) == 0 && retlen == 6) { -+ printk(KERN_INFO "nslu2 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", -+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); -+ memcpy(plat_mac0.hwaddr, mac, 6); -+ } else { -+ printk(KERN_ERR "nslu2 mac: read failed\n"); -+ } -+ } -+} -+ -+static void nslu2_flash_remove(struct mtd_info *mtd) { -+} -+ -+static struct mtd_notifier nslu2_flash_notifier = { -+ .add = nslu2_flash_add, -+ .remove = nslu2_flash_remove, -+}; -+ - static void nslu2_power_off(void) - { - /* This causes the box to drop the power and go dead. */ -@@ -210,6 +235,8 @@ static void __init nslu2_init(void) - (void)platform_device_register(&nslu2_uart); - - platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices)); -+ -+ register_mtd_user(&nslu2_flash_notifier); - } - - MACHINE_START(NSLU2, "Linksys NSLU2") diff --git a/target/linux/ixp4xx-2.6/patches/160-nas100d_artop_temp_fix.patch b/target/linux/ixp4xx-2.6/patches/160-nas100d_artop_temp_fix.patch deleted file mode 100644 index b7ac4d94c6..0000000000 --- a/target/linux/ixp4xx-2.6/patches/160-nas100d_artop_temp_fix.patch +++ /dev/null @@ -1,49 +0,0 @@ -From: Alan Cox <alan@redhat.com> -To: Alessandro Zummo <alessandro.zummo@towertech.it> -Cc: Jeff Garzik <jgarzik@redhat.com>, Alan Cox <alan@redhat.com> -Subject: Re: drivers/ata/pata_artop.c -Date: Sun, 15 Oct 2006 14:25:16 -0400 -User-Agent: Mutt/1.4.1i - -On Sun, Oct 15, 2006 at 07:18:31PM +0200, Alessandro Zummo wrote: -> In the discovery phase there's a lot of time spent in the detection -> of the second port. - -The error recovery is a bit determined right now - Tejun's been doing some -work on SRST behaviour and also for the worst cases polled detect so it -should come out ok - -> What's the correct way to inform the driver -> to avoid checking the second port? - -Set the number of ports to 1 in your own tree for now. The real fix is -not to go poking at pata ports if the ret is 0xFF - ---- - drivers/ata/pata_artop.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -Index: linux-2.6.19/drivers/ata/pata_artop.c -=================================================================== ---- linux-2.6.19.orig/drivers/ata/pata_artop.c -+++ linux-2.6.19/drivers/ata/pata_artop.c -@@ -26,6 +26,7 @@ - #include <scsi/scsi_host.h> - #include <linux/libata.h> - #include <linux/ata.h> -+#include <asm/mach-types.h> - - #define DRV_NAME "pata_artop" - #define DRV_VERSION "0.4.2" -@@ -469,6 +470,11 @@ static int artop_init_one (struct pci_de - pci_read_config_byte(pdev, 0x4a, ®); - pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80); - -+ /* NAS100D workaround */ -+#ifdef CONFIG_MACH_NAS100D -+ if (machine_is_nas100d()) -+ ports = 1; -+#endif - } - - BUG_ON(info == NULL); diff --git a/target/linux/ixp4xx-2.6/patches/178-via_velocity_bigendian.patch b/target/linux/ixp4xx-2.6/patches/178-via_velocity_bigendian.patch deleted file mode 100644 index bfff465227..0000000000 --- a/target/linux/ixp4xx-2.6/patches/178-via_velocity_bigendian.patch +++ /dev/null @@ -1,927 +0,0 @@ -Index: linux-2.6.20-rc3/drivers/net/via-velocity.c -=================================================================== ---- linux-2.6.20-rc3.orig/drivers/net/via-velocity.c 2007-01-02 10:30:25.892465963 +0000 -+++ linux-2.6.20-rc3/drivers/net/via-velocity.c 2007-01-02 10:30:36.261113964 +0000 -@@ -96,11 +96,31 @@ - MODULE_LICENSE("GPL"); - MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver"); - -+/* Valid values for vdebug (additive, this is a bitmask): -+ * 0x00 => off -+ * 0x01 => always on -+ * 0x02 => additional detail on tx (rx, too, if anyone implements same) -+ * 0x04 => detail the initialization process -+ * 0x08 => spot debug detail; to be used as developers see fit -+ */ -+static int vdebug = 0; -+ -+/* HAIL - these macros are for the normal 0x01-type tracing... */ -+#define HAIL(S) \ -+ if (vdebug&1) printk(KERN_NOTICE "%s\n", (S)); -+#define HAILS(S,T) \ -+ if (vdebug&1) printk(KERN_NOTICE "%s -> status=0x%x\n", (S), (T)); -+ - #define VELOCITY_PARAM(N,D) \ - static int N[MAX_UNITS]=OPTION_DEFAULT;\ - module_param_array(N, int, NULL, 0); \ - MODULE_PARM_DESC(N, D); - -+#define VELO_DEBUG_MIN 0 -+#define VELO_DEBUG_MAX 255 -+#define VELO_DEBUG_DEF 0 -+VELOCITY_PARAM(velo_debug, "Debug level"); -+ - #define RX_DESC_MIN 64 - #define RX_DESC_MAX 255 - #define RX_DESC_DEF 64 -@@ -385,12 +405,12 @@ - if (val == -1) - *opt = def; - else if (val < min || val > max) { -- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n", -- devname, name, min, max); -+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (%d-%d)\n", -+ name, min, max); - *opt = def; - } else { -- VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n", -- devname, name, val); -+ VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "via-velocity: set value of parameter %s to %d\n", -+ name, val); - *opt = val; - } - } -@@ -415,12 +435,12 @@ - if (val == -1) - *opt |= (def ? flag : 0); - else if (val < 0 || val > 1) { -- printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n", -- devname, name); -+ printk(KERN_NOTICE "via-velocity: the value of parameter %s is invalid, the valid range is (0-1)\n", -+ name); - *opt |= (def ? flag : 0); - } else { -- printk(KERN_INFO "%s: set parameter %s to %s\n", -- devname, name, val ? "TRUE" : "FALSE"); -+ printk(KERN_INFO "via-velocity: set parameter %s to %s\n", -+ name, val ? "TRUE" : "FALSE"); - *opt |= (val ? flag : 0); - } - } -@@ -438,6 +458,7 @@ - static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname) - { - -+ velocity_set_int_opt(&opts->velo_debug, velo_debug[index], VELO_DEBUG_MIN, VELO_DEBUG_MAX, VELO_DEBUG_DEF, "velo_debug", devname); - velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname); - velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname); - velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname); -@@ -452,6 +473,7 @@ - velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname); - velocity_set_int_opt((int *) &opts->int_works, int_works[index], INT_WORKS_MIN, INT_WORKS_MAX, INT_WORKS_DEF, "Interrupt service works", devname); - opts->numrx = (opts->numrx & ~3); -+ vdebug = opts->velo_debug; - } - - /** -@@ -466,6 +488,8 @@ - { - struct mac_regs __iomem * regs = vptr->mac_regs; - -+ HAIL("velocity_init_cam_filter"); -+ - /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */ - WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG); - WORD_REG_BITS_ON(MCFG_VIDFR, ®s->MCFG); -@@ -484,14 +508,12 @@ - WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG); - - mac_set_cam(regs, 0, (u8 *) & (vptr->options.vid), VELOCITY_VLAN_ID_CAM); -- vptr->vCAMmask[0] |= 1; -- mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM); - } else { - u16 temp = 0; - mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM); -- temp = 1; -- mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM); - } -+ vptr->vCAMmask[0] |= 1; -+ mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM); - } - - /** -@@ -508,13 +530,15 @@ - struct mac_regs __iomem * regs = vptr->mac_regs; - int i; - -+ HAIL("velocity_rx_reset"); - vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0; - - /* - * Init state, all RD entries belong to the NIC - */ - for (i = 0; i < vptr->options.numrx; ++i) -- vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC; -+ /* vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC; BE */ -+ vptr->rd_ring[i].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */ - - writew(vptr->options.numrx, ®s->RBRDU); - writel(vptr->rd_pool_dma, ®s->RDBaseLo); -@@ -537,12 +561,15 @@ - struct mac_regs __iomem * regs = vptr->mac_regs; - int i, mii_status; - -+ if (vdebug&5) printk(KERN_NOTICE "velocity_init_registers: entering\n"); -+ - mac_wol_reset(regs); - - switch (type) { - case VELOCITY_INIT_RESET: - case VELOCITY_INIT_WOL: - -+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: RESET or WOL\n"); - netif_stop_queue(vptr->dev); - - /* -@@ -570,12 +597,13 @@ - - case VELOCITY_INIT_COLD: - default: -+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: COLD or default\n"); - /* - * Do reset - */ - velocity_soft_reset(vptr); -+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: soft reset complete.\n"); - mdelay(5); -- - mac_eeprom_reload(regs); - for (i = 0; i < 6; i++) { - writeb(vptr->dev->dev_addr[i], &(regs->PAR[i])); -@@ -593,11 +621,16 @@ - */ - BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), ®s->CFGB); - -+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Initializing CAM filter\n"); - /* - * Init CAM filter - */ -+ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: about to init CAM filters\n"); -+ mdelay(5); /* MJW - ARM processors, kernel 2.6.19 - this fixes oopses and hangs */ - velocity_init_cam_filter(vptr); -+ if (vdebug&8) printk(KERN_NOTICE "velocity: spot debug: init CAM filters complete\n"); - -+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Setting packet filter\n"); - /* - * Set packet filter: Receive directed and broadcast address - */ -@@ -607,10 +640,12 @@ - * Enable MII auto-polling - */ - enable_mii_autopoll(regs); -+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: enable_mii_autopoll complete.\n"); - - vptr->int_mask = INT_MASK_DEF; - -- writel(cpu_to_le32(vptr->rd_pool_dma), ®s->RDBaseLo); -+ /* writel(cpu_to_le32(vptr->rd_pool_dma), ®s->RDBaseLo); BE */ -+ writel((vptr->rd_pool_dma), ®s->RDBaseLo); /* BE */ - writew(vptr->options.numrx - 1, ®s->RDCSize); - mac_rx_queue_run(regs); - mac_rx_queue_wake(regs); -@@ -618,10 +653,13 @@ - writew(vptr->options.numtx - 1, ®s->TDCSize); - - for (i = 0; i < vptr->num_txq; i++) { -- writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); -+ /* writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); BE */ -+ writel((vptr->td_pool_dma[i]), &(regs->TDBaseLo[i])); /* BE */ - mac_tx_queue_run(regs, i); - } - -+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: DMA settings complete.\n"); -+ - init_flow_control_register(vptr); - - writel(CR0_STOP, ®s->CR0Clr); -@@ -640,8 +678,10 @@ - - enable_flow_control_ability(vptr); - mac_hw_mibs_init(regs); -+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: Set interrupt mask\n"); - mac_write_int_mask(vptr->int_mask, regs); - mac_clear_isr(regs); -+ if (vdebug&4) printk(KERN_NOTICE "velocity_init_registers: complete.\n"); - - } - } -@@ -659,6 +699,7 @@ - struct mac_regs __iomem * regs = vptr->mac_regs; - int i = 0; - -+ HAIL("velocity_soft_reset"); - writel(CR0_SFRST, ®s->CR0Set); - - for (i = 0; i < W_MAX_TIMEOUT; i++) { -@@ -722,6 +763,7 @@ - VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION); - printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n"); - printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n"); -+ printk(KERN_INFO "BE support, misc. fixes MJW 01Jan2007 - may be unstable\n"); - first = 0; - } - -@@ -935,6 +977,7 @@ - dma_addr_t pool_dma; - u8 *pool; - -+ HAIL("velocity_init_rings"); - /* - * Allocate all RD/TD rings a single pool - */ -@@ -997,6 +1040,7 @@ - static void velocity_free_rings(struct velocity_info *vptr) - { - int size; -+ HAIL("velocity_free_rings"); - - size = vptr->options.numrx * sizeof(struct rx_desc) + - vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq; -@@ -1013,6 +1057,7 @@ - struct mac_regs __iomem *regs = vptr->mac_regs; - int avail, dirty, unusable; - -+ HAIL("velocity_give_many_rx_descs"); - /* - * RD number must be equal to 4X per hardware spec - * (programming guide rev 1.20, p.13) -@@ -1026,7 +1071,8 @@ - dirty = vptr->rd_dirty - unusable; - for (avail = vptr->rd_filled & 0xfffc; avail; avail--) { - dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1; -- vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC; -+ /* vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC; BE */ -+ vptr->rd_ring[dirty].rdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */ - } - - writew(vptr->rd_filled & 0xfffc, ®s->RBRDU); -@@ -1036,12 +1082,14 @@ - static int velocity_rx_refill(struct velocity_info *vptr) - { - int dirty = vptr->rd_dirty, done = 0, ret = 0; -+ HAIL("velocity_rx_refill"); - - do { - struct rx_desc *rd = vptr->rd_ring + dirty; - - /* Fine for an all zero Rx desc at init time as well */ -- if (rd->rdesc0.owner == OWNED_BY_NIC) -+ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */ -+ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */ - break; - - if (!vptr->rd_info[dirty].skb) { -@@ -1076,6 +1124,7 @@ - unsigned int rsize = sizeof(struct velocity_rd_info) * - vptr->options.numrx; - -+ HAIL("velocity_init_rd_ring"); - vptr->rd_info = kmalloc(rsize, GFP_KERNEL); - if(vptr->rd_info == NULL) - goto out; -@@ -1105,6 +1154,7 @@ - { - int i; - -+ HAIL("velocity_free_rd_ring"); - if (vptr->rd_info == NULL) - return; - -@@ -1146,6 +1196,7 @@ - unsigned int tsize = sizeof(struct velocity_td_info) * - vptr->options.numtx; - -+ HAIL("velocity_init_td_ring"); - /* Init the TD ring entries */ - for (j = 0; j < vptr->num_txq; j++) { - curr = vptr->td_pool_dma[j]; -@@ -1182,6 +1233,7 @@ - struct velocity_td_info * td_info = &(vptr->td_infos[q][n]); - int i; - -+ HAIL("velocity_free_td_ring_entry"); - if (td_info == NULL) - return; - -@@ -1211,6 +1263,7 @@ - { - int i, j; - -+ HAIL("velocity_free_td_ring"); - for (j = 0; j < vptr->num_txq; j++) { - if (vptr->td_infos[j] == NULL) - continue; -@@ -1238,34 +1291,42 @@ - struct net_device_stats *stats = &vptr->stats; - int rd_curr = vptr->rd_curr; - int works = 0; -+ u16 wRSR; /* BE */ - -+ HAILS("velocity_rx_srv", status); - do { - struct rx_desc *rd = vptr->rd_ring + rd_curr; - - if (!vptr->rd_info[rd_curr].skb) - break; - -- if (rd->rdesc0.owner == OWNED_BY_NIC) -+ /* if (rd->rdesc0.owner == OWNED_BY_NIC) BE */ -+ if (rd->rdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */ - break; - - rmb(); - -+ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */ - /* - * Don't drop CE or RL error frame although RXOK is off - */ -- if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) { -+ /* if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) { BE */ -+ if ((wRSR & RSR_RXOK) || (!(wRSR & RSR_RXOK) && (wRSR & (RSR_CE | RSR_RL)))) { /* BE */ - if (velocity_receive_frame(vptr, rd_curr) < 0) - stats->rx_dropped++; - } else { -- if (rd->rdesc0.RSR & RSR_CRC) -+ /* if (rd->rdesc0.RSR & RSR_CRC) BE */ -+ if (wRSR & RSR_CRC) /* BE */ - stats->rx_crc_errors++; -- if (rd->rdesc0.RSR & RSR_FAE) -+ /* if (rd->rdesc0.RSR & RSR_FAE) BE */ -+ if (wRSR & RSR_FAE) /* BE */ - stats->rx_frame_errors++; - - stats->rx_dropped++; - } - -- rd->inten = 1; -+ /* rd->inten = 1; BE */ -+ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */ - - vptr->dev->last_rx = jiffies; - -@@ -1296,13 +1357,21 @@ - - static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb) - { -+ u8 bCSM; -+ HAIL("velocity_rx_csum"); - skb->ip_summed = CHECKSUM_NONE; - -- if (rd->rdesc1.CSM & CSM_IPKT) { -- if (rd->rdesc1.CSM & CSM_IPOK) { -- if ((rd->rdesc1.CSM & CSM_TCPKT) || -- (rd->rdesc1.CSM & CSM_UDPKT)) { -- if (!(rd->rdesc1.CSM & CSM_TUPOK)) { -+// if (rd->rdesc1.CSM & CSM_IPKT) { -+// if (rd->rdesc1.CSM & CSM_IPOK) { -+// if ((rd->rdesc1.CSM & CSM_TCPKT) || -+// (rd->rdesc1.CSM & CSM_UDPKT)) { -+// if (!(rd->rdesc1.CSM & CSM_TUPOK)) { -+ bCSM = (u8)(cpu_to_le32(rd->rdesc1) >> 16); /* BE */ -+ if (bCSM & CSM_IPKT) { -+ if (bCSM & CSM_IPOK) { -+ if ((bCSM & CSM_TCPKT) || -+ (bCSM & CSM_UDPKT)) { -+ if (!(bCSM & CSM_TUPOK)) { /* BE */ - return; - } - } -@@ -1328,9 +1397,11 @@ - { - int ret = -1; - -+ HAIL("velocity_rx_copy"); - if (pkt_size < rx_copybreak) { - struct sk_buff *new_skb; - -+ HAIL("velocity_rx_copy (working...)"); - new_skb = dev_alloc_skb(pkt_size + 2); - if (new_skb) { - new_skb->dev = vptr->dev; -@@ -1360,10 +1431,12 @@ - static inline void velocity_iph_realign(struct velocity_info *vptr, - struct sk_buff *skb, int pkt_size) - { -+ HAIL("velocity_iph_realign"); - /* FIXME - memmove ? */ - if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) { - int i; - -+ HAIL("velocity_iph_realign (working...)"); - for (i = pkt_size; i >= 0; i--) - *(skb->data + i + 2) = *(skb->data + i); - skb_reserve(skb, 2); -@@ -1382,19 +1455,27 @@ - static int velocity_receive_frame(struct velocity_info *vptr, int idx) - { - void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int); -+ u16 pkt_len; /* BE */ -+ u16 wRSR; /* BE */ -+ struct sk_buff *skb; - struct net_device_stats *stats = &vptr->stats; - struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]); - struct rx_desc *rd = &(vptr->rd_ring[idx]); -- int pkt_len = rd->rdesc0.len; -- struct sk_buff *skb; -+ /* int pkt_len = rd->rdesc0.len BE */; -+ -+ pkt_len = ((cpu_to_le32(rd->rdesc0) >> 16) & 0x00003FFFUL); /* BE */ -+ wRSR = (u16)(cpu_to_le32(rd->rdesc0)); /* BE */ - -- if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { -+ HAIL("velocity_receive_frame"); -+ /* if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { BE */ -+ if (wRSR & (RSR_STP | RSR_EDP)) { /* BE */ - VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name); - stats->rx_length_errors++; - return -EINVAL; - } - -- if (rd->rdesc0.RSR & RSR_MAR) -+ /* if (rd->rdesc0.RSR & RSR_MAR) BE */ -+ if (wRSR & RSR_MAR) /* BE */ - vptr->stats.multicast++; - - skb = rd_info->skb; -@@ -1408,7 +1489,8 @@ - */ - - if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) { -- if (rd->rdesc0.RSR & RSR_RL) { -+ /* if (rd->rdesc0.RSR & RSR_RL) { BE */ -+ if (wRSR & RSR_RL) { /* BE */ - stats->rx_length_errors++; - return -EINVAL; - } -@@ -1452,6 +1534,7 @@ - struct rx_desc *rd = &(vptr->rd_ring[idx]); - struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]); - -+ HAIL("velocity_alloc_rx_buf"); - rd_info->skb = dev_alloc_skb(vptr->rx_buf_sz + 64); - if (rd_info->skb == NULL) - return -ENOMEM; -@@ -1469,10 +1552,14 @@ - */ - - *((u32 *) & (rd->rdesc0)) = 0; -- rd->len = cpu_to_le32(vptr->rx_buf_sz); -- rd->inten = 1; -+ /* rd->len = cpu_to_le32(vptr->rx_buf_sz); BE */ -+ /* rd->inten = 1; BE */ - rd->pa_low = cpu_to_le32(rd_info->skb_dma); -- rd->pa_high = 0; -+ /* rd->pa_high = 0; BE */ -+ rd->ltwo &= cpu_to_le32(0xC000FFFFUL); /* BE */ -+ rd->ltwo |= cpu_to_le32((vptr->rx_buf_sz << 16)); /* BE */ -+ rd->ltwo |= cpu_to_le32(BE_INT_ENABLE); /* BE */ -+ rd->ltwo &= cpu_to_le32(0xFFFF0000UL); /* BE */ - return 0; - } - -@@ -1493,9 +1580,11 @@ - int full = 0; - int idx; - int works = 0; -+ u16 wTSR; /* BE */ - struct velocity_td_info *tdinfo; - struct net_device_stats *stats = &vptr->stats; - -+ HAILS("velocity_tx_srv", status); - for (qnum = 0; qnum < vptr->num_txq; qnum++) { - for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0; - idx = (idx + 1) % vptr->options.numtx) { -@@ -1506,22 +1595,29 @@ - td = &(vptr->td_rings[qnum][idx]); - tdinfo = &(vptr->td_infos[qnum][idx]); - -- if (td->tdesc0.owner == OWNED_BY_NIC) -+ /* if (td->tdesc0.owner == OWNED_BY_NIC) BE */ -+ if (td->tdesc0 & cpu_to_le32(BE_OWNED_BY_NIC)) /* BE */ - break; - - if ((works++ > 15)) - break; - -- if (td->tdesc0.TSR & TSR0_TERR) { -+ wTSR = (u16)cpu_to_le32(td->tdesc0); -+ /* if (td->tdesc0.TSR & TSR0_TERR) { BE */ -+ if (wTSR & TSR0_TERR) { /* BE */ - stats->tx_errors++; - stats->tx_dropped++; -- if (td->tdesc0.TSR & TSR0_CDH) -+ /* if (td->tdesc0.TSR & TSR0_CDH) BE */ -+ if (wTSR & TSR0_CDH) /* BE */ - stats->tx_heartbeat_errors++; -- if (td->tdesc0.TSR & TSR0_CRS) -+ /* if (td->tdesc0.TSR & TSR0_CRS) BE */ -+ if (wTSR & TSR0_CRS) /* BE */ - stats->tx_carrier_errors++; -- if (td->tdesc0.TSR & TSR0_ABT) -+ /* if (td->tdesc0.TSR & TSR0_ABT) BE */ -+ if (wTSR & TSR0_ABT) /* BE */ - stats->tx_aborted_errors++; -- if (td->tdesc0.TSR & TSR0_OWC) -+ /* if (td->tdesc0.TSR & TSR0_OWC) BE */ -+ if (wTSR & TSR0_OWC) /* BE */ - stats->tx_window_errors++; - } else { - stats->tx_packets++; -@@ -1610,6 +1706,7 @@ - - static void velocity_error(struct velocity_info *vptr, int status) - { -+ HAILS("velocity_error", status); - - if (status & ISR_TXSTLI) { - struct mac_regs __iomem * regs = vptr->mac_regs; -@@ -1699,6 +1796,7 @@ - struct sk_buff *skb = tdinfo->skb; - int i; - -+ HAIL("velocity_free_tx_buf"); - /* - * Don't unmap the pre-allocated tx_bufs - */ -@@ -1902,6 +2000,7 @@ - struct velocity_td_info *tdinfo; - unsigned long flags; - int index; -+ u32 lbufsz; /* BE */ - - int pktlen = skb->len; - -@@ -1918,9 +2017,18 @@ - td_ptr = &(vptr->td_rings[qnum][index]); - tdinfo = &(vptr->td_infos[qnum][index]); - -- td_ptr->tdesc1.TCPLS = TCPLS_NORMAL; -- td_ptr->tdesc1.TCR = TCR0_TIC; -- td_ptr->td_buf[0].queue = 0; -+ td_ptr->tdesc0 = 0x00000000UL; /* BE */ -+ td_ptr->tdesc1 = 0x00000000UL; /* BE */ -+ -+ /* td_ptr->tdesc1.TCPLS = TCPLS_NORMAL; BE */ -+ td_ptr->tdesc1 &= cpu_to_le32(0xfcffffffUL); /* BE */ -+ td_ptr->tdesc1 |= cpu_to_le32(((u32)TCPLS_NORMAL) << 24); /* BE */ -+ -+ /* td_ptr->tdesc1.TCR = TCR0_TIC; BE */ -+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TIC); /* BE */ -+ -+ /* td_ptr->td_buf[0].queue = 0; BE */ -+ td_ptr->td_buf[0].ltwo &= cpu_to_le32(~BE_QUEUE_ENABLE); /* BE */ - - /* - * Pad short frames. -@@ -1932,20 +2040,35 @@ - memset(tdinfo->buf + skb->len, 0, ETH_ZLEN - skb->len); - tdinfo->skb = skb; - tdinfo->skb_dma[0] = tdinfo->buf_dma; -- td_ptr->tdesc0.pktsize = pktlen; -+ /* td_ptr->tdesc0.pktsize = pktlen; */ -+ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */ -+ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */ -+ lbufsz = lbufsz << 16; /* BE - shift over */ -+ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */ - td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); -- td_ptr->td_buf[0].pa_high = 0; -- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; -+ /* td_ptr->td_buf[0].pa_high = 0; */ -+ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; */ -+ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */ - tdinfo->nskb_dma = 1; -- td_ptr->tdesc1.CMDZ = 2; -+ /* td_ptr->tdesc1.CMDZ = 2; */ -+ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */ -+ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28); /* BE */ - } else - #ifdef VELOCITY_ZERO_COPY_SUPPORT -+ /* -+ * BE - NOTE on the VELOCITY_ZERO_COPY_SUPPORT: -+ * This block of code has NOT been patched up for BE support, as -+ * it is certainly broken -- if it compiles at all. Since the BE -+ * fixes depend on the broken code, attempts to convert to BE support -+ * would almost certainly confuse more than help. -+ */ - if (skb_shinfo(skb)->nr_frags > 0) { - int nfrags = skb_shinfo(skb)->nr_frags; - tdinfo->skb = skb; - if (nfrags > 6) { - memcpy(tdinfo->buf, skb->data, skb->len); - tdinfo->skb_dma[0] = tdinfo->buf_dma; -+ /* BE: Er, exactly what value are we assigning in this next line? */ - td_ptr->tdesc0.pktsize = - td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); - td_ptr->td_buf[0].pa_high = 0; -@@ -1962,6 +2085,7 @@ - /* FIXME: support 48bit DMA later */ - td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma); - td_ptr->td_buf[i].pa_high = 0; -+ /* BE: This next line can't be right: */ - td_ptr->td_buf[i].bufsize = skb->len->skb->data_len; - - for (i = 0; i < nfrags; i++) { -@@ -1979,7 +2103,7 @@ - } - - } else --#endif -+#endif /* (broken) VELOCITY_ZERO_COPY_SUPPORT */ - { - /* - * Map the linear network buffer into PCI space and -@@ -1987,19 +2111,30 @@ - */ - tdinfo->skb = skb; - tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE); -- td_ptr->tdesc0.pktsize = pktlen; -+ /* td_ptr->tdesc0.pktsize = pktlen; BE */ -+ td_ptr->tdesc0 &= cpu_to_le32(0xc000ffffUL); /* BE */ -+ lbufsz = pktlen; /* Assign, and make sure it's unsigned 32 bits - BE */ -+ lbufsz = lbufsz << 16; /* BE */ -+ td_ptr->tdesc0 |= cpu_to_le32(lbufsz); /* BE */ - td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); -- td_ptr->td_buf[0].pa_high = 0; -- td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; -+ /* td_ptr->td_buf[0].pa_high = 0; BE */ -+ /* td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize; BE */ -+ td_ptr->td_buf[0].ltwo = cpu_to_le32(lbufsz); /* BE */ -+ - tdinfo->nskb_dma = 1; -- td_ptr->tdesc1.CMDZ = 2; -+ /* td_ptr->tdesc1.CMDZ = 2; BE */ -+ td_ptr->tdesc1 &= cpu_to_le32(0x0fffffffUL); /* BE */ -+ td_ptr->tdesc1 |= cpu_to_le32(((u32)0x2) << 28);/* BE */ - } - - if (vptr->flags & VELOCITY_FLAGS_TAGGING) { -- td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff); -- td_ptr->tdesc1.pqinf.priority = 0; -- td_ptr->tdesc1.pqinf.CFI = 0; -- td_ptr->tdesc1.TCR |= TCR0_VETAG; -+ /* td_ptr->tdesc1.pqinf.priority = 0; BE */ -+ /* td_ptr->tdesc1.pqinf.CFI = 0; BE */ -+ td_ptr->tdesc1 &= cpu_to_le32(0xFFFF0000UL); /* BE */ -+ /* td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff); BE */ -+ td_ptr->tdesc1 |= cpu_to_le32((vptr->options.vid & 0xfff)); /* BE */ -+ /* td_ptr->tdesc1.TCR |= TCR0_VETAG; BE */ -+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_VETAG); /* BE */ - } - - /* -@@ -2009,26 +2144,34 @@ - && (skb->ip_summed == CHECKSUM_PARTIAL)) { - struct iphdr *ip = skb->nh.iph; - if (ip->protocol == IPPROTO_TCP) -- td_ptr->tdesc1.TCR |= TCR0_TCPCK; -+ /* td_ptr->tdesc1.TCR |= TCR0_TCPCK; BE */ -+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_TCPCK); /* BE */ - else if (ip->protocol == IPPROTO_UDP) -- td_ptr->tdesc1.TCR |= (TCR0_UDPCK); -- td_ptr->tdesc1.TCR |= TCR0_IPCK; -- } -+ /* td_ptr->tdesc1.TCR |= (TCR0_UDPCK); BE */ -+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_UDPCK); /* BE */ -+ /* td_ptr->tdesc1.TCR |= TCR0_IPCK; BE */ -+ td_ptr->tdesc1 |= cpu_to_le32(BE_TCR_IPCK); /* BE */ -+ } - { - - int prev = index - 1; - - if (prev < 0) - prev = vptr->options.numtx - 1; -- td_ptr->tdesc0.owner = OWNED_BY_NIC; -+ /* td_ptr->tdesc0.owner = OWNED_BY_NIC; BE */ -+ td_ptr->tdesc0 |= cpu_to_le32(BE_OWNED_BY_NIC); /* BE */ - vptr->td_used[qnum]++; - vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx; - - if (AVAIL_TD(vptr, qnum) < 1) - netif_stop_queue(dev); - -- td_ptr = &(vptr->td_rings[qnum][prev]); -- td_ptr->td_buf[0].queue = 1; -+ td_ptr = &(vptr->td_rings[qnum][prev]); -+ /* td_ptr->td_buf[0].queue = 1; BE */ -+ td_ptr->td_buf[0].ltwo |= cpu_to_le32(BE_QUEUE_ENABLE); /* BE */ -+ if (vdebug&2) printk(KERN_NOTICE "velocity_xmit: (%s) len=%d idx=%d tdesc0=0x%x tdesc1=0x%x ltwo=0x%x\n", -+ (pktlen<ETH_ZLEN) ? "short" : "normal", pktlen, index, -+ td_ptr->tdesc0, td_ptr->tdesc1, td_ptr->td_buf[0].ltwo); - mac_tx_queue_wake(vptr->mac_regs, qnum); - } - dev->trans_start = jiffies; -@@ -2054,7 +2197,7 @@ - u32 isr_status; - int max_count = 0; - -- -+ HAIL("velocity_intr"); - spin_lock(&vptr->lock); - isr_status = mac_read_isr(vptr->mac_regs); - -@@ -2073,7 +2216,10 @@ - - while (isr_status != 0) { - mac_write_isr(vptr->mac_regs, isr_status); -- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) -+ HAILS("velocity_intr",isr_status); -+ /* MJW - velocity_error is ALWAYS called; need to mask off some other flags */ -+ /* if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) */ -+ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI | ISR_PTX0I | ISR_ISR0))) - velocity_error(vptr, isr_status); - if (isr_status & (ISR_PRXI | ISR_PPRXI)) - max_count += velocity_rx_srv(vptr, isr_status); -@@ -2111,6 +2257,7 @@ - int i; - struct dev_mc_list *mclist; - -+ HAIL("velocity_set_multi"); - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - writel(0xffffffff, ®s->MARCAM[0]); - writel(0xffffffff, ®s->MARCAM[4]); -@@ -2154,6 +2301,7 @@ - { - struct velocity_info *vptr = netdev_priv(dev); - -+ HAIL("net_device_stats"); - /* If the hardware is down, don't touch MII */ - if(!netif_running(dev)) - return &vptr->stats; -@@ -2198,6 +2346,7 @@ - struct velocity_info *vptr = netdev_priv(dev); - int ret; - -+ HAIL("velocity_ioctl"); - /* If we are asked for information and the device is power - saving then we need to bring the device back up to talk to it */ - -@@ -2416,6 +2565,7 @@ - { - u16 ww; - -+ HAIL("velocity_mii_read"); - /* - * Disable MIICR_MAUTO, so that mii addr can be set normally - */ -@@ -2452,6 +2602,7 @@ - { - u16 ww; - -+ HAIL("velocity_mii_write"); - /* - * Disable MIICR_MAUTO, so that mii addr can be set normally - */ -Index: linux-2.6.20-rc3/drivers/net/via-velocity.h -=================================================================== ---- linux-2.6.20-rc3.orig/drivers/net/via-velocity.h 2006-11-29 21:57:37.000000000 +0000 -+++ linux-2.6.20-rc3/drivers/net/via-velocity.h 2007-01-02 10:30:36.265114211 +0000 -@@ -196,64 +196,70 @@ - * Receive descriptor - */ - --struct rdesc0 { -- u16 RSR; /* Receive status */ -- u16 len:14; /* Received packet length */ -- u16 reserved:1; -- u16 owner:1; /* Who owns this buffer ? */ --}; -- --struct rdesc1 { -- u16 PQTAG; -- u8 CSM; -- u8 IPKT; --}; -+//struct rdesc0 { -+// u16 RSR; /* Receive status */ -+// u16 len:14; /* Received packet length */ -+// u16 reserved:1; -+// u16 owner:1; /* Who owns this buffer ? */ -+//}; -+ -+//struct rdesc1 { -+// u16 PQTAG; -+// u8 CSM; -+// u8 IPKT; -+//}; - - struct rx_desc { -- struct rdesc0 rdesc0; -- struct rdesc1 rdesc1; -+// struct rdesc0 rdesc0; -+// struct rdesc1 rdesc1; -+ u32 rdesc0; -+ u32 rdesc1; - u32 pa_low; /* Low 32 bit PCI address */ -- u16 pa_high; /* Next 16 bit PCI address (48 total) */ -- u16 len:15; /* Frame size */ -- u16 inten:1; /* Enable interrupt */ -+// u16 pa_high; /* Next 16 bit PCI address (48 total) */ -+// u16 len:15; /* Frame size */ -+// u16 inten:1; /* Enable interrupt */ -+ u32 ltwo; - } __attribute__ ((__packed__)); - - /* - * Transmit descriptor - */ - --struct tdesc0 { -- u16 TSR; /* Transmit status register */ -- u16 pktsize:14; /* Size of frame */ -- u16 reserved:1; -- u16 owner:1; /* Who owns the buffer */ --}; -- --struct pqinf { /* Priority queue info */ -- u16 VID:12; -- u16 CFI:1; -- u16 priority:3; --} __attribute__ ((__packed__)); -- --struct tdesc1 { -- struct pqinf pqinf; -- u8 TCR; -- u8 TCPLS:2; -- u8 reserved:2; -- u8 CMDZ:4; --} __attribute__ ((__packed__)); -+//struct tdesc0 { -+// u16 TSR; /* Transmit status register */ -+// u16 pktsize:14; /* Size of frame */ -+// u16 reserved:1; -+// u16 owner:1; /* Who owns the buffer */ -+//}; -+ -+//struct pqinf { /* Priority queue info */ -+// u16 VID:12; -+// u16 CFI:1; -+// u16 priority:3; -+//} __attribute__ ((__packed__)); -+ -+//struct tdesc1 { -+// struct pqinf pqinf; -+// u8 TCR; -+// u8 TCPLS:2; -+// u8 reserved:2; -+// u8 CMDZ:4; -+//} __attribute__ ((__packed__)); - - struct td_buf { - u32 pa_low; -- u16 pa_high; -- u16 bufsize:14; -- u16 reserved:1; -- u16 queue:1; -+// u16 pa_high; -+// u16 bufsize:14; -+// u16 reserved:1; -+// u16 queue:1; -+ u32 ltwo; - } __attribute__ ((__packed__)); - - struct tx_desc { -- struct tdesc0 tdesc0; -- struct tdesc1 tdesc1; -+// struct tdesc0 tdesc0; -+// struct tdesc1 tdesc1; -+ u32 tdesc0; -+ u32 tdesc1; - struct td_buf td_buf[7]; - }; - -@@ -279,6 +285,16 @@ - OWNED_BY_NIC = 1 - }; - -+/* Constants added for the BE fixes */ -+#define BE_OWNED_BY_NIC 0x80000000UL -+#define BE_INT_ENABLE 0x80000000UL -+#define BE_QUEUE_ENABLE 0x80000000UL -+#define BE_TCR_TIC 0x00800000UL -+#define BE_TCR_VETAG 0x00200000UL -+#define BE_TCR_TCPCK 0x00040000UL -+#define BE_TCR_UDPCK 0x00080000UL -+#define BE_TCR_IPCK 0x00100000UL -+ - - /* - * MAC registers and macros. -@@ -1698,6 +1714,7 @@ - }; - - struct velocity_opt { -+ int velo_debug; /* debug flag */ - int numrx; /* Number of RX descriptors */ - int numtx; /* Number of TX descriptors */ - enum speed_opt spd_dpx; /* Media link mode */ diff --git a/target/linux/ixp4xx-2.6/patches/185-nslu2_rtc_fixup.patch b/target/linux/ixp4xx-2.6/patches/185-nslu2_rtc_fixup.patch deleted file mode 100644 index 2c379d2648..0000000000 --- a/target/linux/ixp4xx-2.6/patches/185-nslu2_rtc_fixup.patch +++ /dev/null @@ -1,54 +0,0 @@ -Index: linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nslu2-setup.c -+++ linux-2.6.19/arch/arm/mach-ixp4xx/nslu2-setup.c -@@ -20,6 +20,7 @@ - #include <linux/leds.h> - #include <linux/mtd/mtd.h> - -+#include <asm/setup.h> - #include <asm/mach-types.h> - #include <asm/mach/arch.h> - #include <asm/mach/flash.h> -@@ -239,11 +240,41 @@ static void __init nslu2_init(void) - register_mtd_user(&nslu2_flash_notifier); - } - -+static char nslu2_rtc_probe[] __initdata = "rtc-x1205.probe=0,0x6f "; -+ -+static void __init nslu2_fixup(struct machine_desc *desc, -+ struct tag *tags, char **cmdline, struct meminfo *mi) -+{ -+ struct tag *t = tags; -+ char *p = *cmdline; -+ -+ /* Find the end of the tags table, taking note of any cmdline tag. */ -+ for (; t->hdr.size; t = tag_next(t)) { -+ if (t->hdr.tag == ATAG_CMDLINE) { -+ p = t->u.cmdline.cmdline; -+ } -+ } -+ -+ /* Overwrite the end of the table with a new cmdline tag. */ -+ t->hdr.tag = ATAG_CMDLINE; -+ t->hdr.size = (sizeof (struct tag_header) + -+ strlen(nslu2_rtc_probe) + strlen(p) + 1 + 4) >> 2; -+ strlcpy(t->u.cmdline.cmdline, nslu2_rtc_probe, COMMAND_LINE_SIZE); -+ strlcpy(t->u.cmdline.cmdline + strlen(nslu2_rtc_probe), p, -+ COMMAND_LINE_SIZE - strlen(nslu2_rtc_probe)); -+ -+ /* Terminate the table. */ -+ t = tag_next(t); -+ t->hdr.tag = ATAG_NONE; -+ t->hdr.size = 0; -+} -+ - MACHINE_START(NSLU2, "Linksys NSLU2") - /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, - .boot_params = 0x00000100, -+ .fixup = nslu2_fixup, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx-2.6/patches/186-nas100d_rtc_fixup.patch b/target/linux/ixp4xx-2.6/patches/186-nas100d_rtc_fixup.patch deleted file mode 100644 index f594802d2f..0000000000 --- a/target/linux/ixp4xx-2.6/patches/186-nas100d_rtc_fixup.patch +++ /dev/null @@ -1,55 +0,0 @@ -Index: linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/nas100d-setup.c -+++ linux-2.6.19/arch/arm/mach-ixp4xx/nas100d-setup.c -@@ -18,6 +18,7 @@ - #include <linux/leds.h> - #include <linux/mtd/mtd.h> - -+#include <asm/setup.h> - #include <asm/mach-types.h> - #include <asm/mach/arch.h> - #include <asm/mach/flash.h> -@@ -225,11 +226,42 @@ static void __init nas100d_init(void) - register_mtd_user(&nas100d_flash_notifier); - } - -+static char nas100d_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 "; -+ -+static void __init nas100d_fixup(struct machine_desc *desc, -+ struct tag *tags, char **cmdline, struct meminfo *mi) -+{ -+ struct tag *t = tags; -+ char *p = *cmdline; -+ -+ /* Find the end of the tags table, taking note of any cmdline tag. */ -+ for (; t->hdr.size; t = tag_next(t)) { -+ if (t->hdr.tag == ATAG_CMDLINE) { -+ p = t->u.cmdline.cmdline; -+ } -+ } -+ -+ /* Overwrite the end of the table with a new cmdline tag. */ -+ t->hdr.tag = ATAG_CMDLINE; -+ t->hdr.size = -+ (sizeof (struct tag_header) + -+ strlen(nas100d_rtc_probe) + strlen(p) + 1 + 4) >> 2; -+ strlcpy(t->u.cmdline.cmdline, nas100d_rtc_probe, COMMAND_LINE_SIZE); -+ strlcpy(t->u.cmdline.cmdline + strlen(nas100d_rtc_probe), p, -+ COMMAND_LINE_SIZE - strlen(nas100d_rtc_probe)); -+ -+ /* Terminate the table. */ -+ t = tag_next(t); -+ t->hdr.tag = ATAG_NONE; -+ t->hdr.size = 0; -+} -+ - MACHINE_START(NAS100D, "Iomega NAS 100d") - /* Maintainer: www.nslu2-linux.org */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, - .boot_params = 0x00000100, -+ .fixup = nas100d_fixup, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx-2.6/patches/187-dsmg600_rtc_fixup.patch b/target/linux/ixp4xx-2.6/patches/187-dsmg600_rtc_fixup.patch deleted file mode 100644 index 04e51cd0c3..0000000000 --- a/target/linux/ixp4xx-2.6/patches/187-dsmg600_rtc_fixup.patch +++ /dev/null @@ -1,57 +0,0 @@ -Index: linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c -=================================================================== ---- linux-2.6.21-arm.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 11:29:44.000000000 -0700 -+++ linux-2.6.21-arm/arch/arm/mach-ixp4xx/dsmg600-setup.c 2007-05-07 11:31:15.000000000 -0700 -@@ -15,6 +15,7 @@ - #include <linux/serial.h> - #include <linux/serial_8250.h> - -+#include <asm/setup.h> - #include <asm/mach-types.h> - #include <asm/mach/arch.h> - #include <asm/mach/flash.h> -@@ -142,6 +143,36 @@ - .init = dsmg600_timer_init, - }; - -+static char dsmg600_rtc_probe[] __initdata = "rtc-pcf8563.probe=0,0x51 "; -+ -+static void __init dsmg600_fixup(struct machine_desc *desc, -+ struct tag *tags, char **cmdline, struct meminfo *mi) -+{ -+ struct tag *t = tags; -+ char *p = *cmdline; -+ -+ /* Find the end of the tags table, taking note of any cmdline tag. */ -+ for (; t->hdr.size; t = tag_next(t)) { -+ if (t->hdr.tag == ATAG_CMDLINE) { -+ p = t->u.cmdline.cmdline; -+ } -+ } -+ -+ /* Overwrite the end of the table with a new cmdline tag. */ -+ t->hdr.tag = ATAG_CMDLINE; -+ t->hdr.size = -+ (sizeof (struct tag_header) + -+ strlen(dsmg600_rtc_probe) + strlen(p) + 1 + 4) >> 2; -+ strlcpy(t->u.cmdline.cmdline, dsmg600_rtc_probe, COMMAND_LINE_SIZE); -+ strlcpy(t->u.cmdline.cmdline + strlen(dsmg600_rtc_probe), p, -+ COMMAND_LINE_SIZE - strlen(dsmg600_rtc_probe)); -+ -+ /* Terminate the table. */ -+ t = tag_next(t); -+ t->hdr.tag = ATAG_NONE; -+ t->hdr.size = 0; -+} -+ - static void __init dsmg600_init(void) - { - ixp4xx_sys_init(); -@@ -174,6 +205,7 @@ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, - .boot_params = 0x00000100, -+ .fixup = dsmg600_fixup, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &dsmg600_timer, diff --git a/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch b/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch deleted file mode 100644 index 80cf000796..0000000000 --- a/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch +++ /dev/null @@ -1,250 +0,0 @@ -diff -Nur linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S ---- linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S 2007-04-02 15:39:28.000000000 +0200 -@@ -46,6 +46,11 @@ - orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) - #endif - -+#ifdef CONFIG_MACH_GATEWAY7001 -+ mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff) -+ orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00) -+#endif -+ - #ifdef CONFIG_ARCH_IXP2000 - mov r1, #-1 - mov r0, #0xd6000000 -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2007-04-02 15:39:28.000000000 +0200 -@@ -0,0 +1,68 @@ -+/* -+ * arch/arch/mach-ixp4xx/gateway7001-pci.c -+ * -+ * PCI setup routines for Gateway 7001 -+ * -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * based on coyote-pci.c: -+ * Copyright (C) 2002 Jungo Software Technologies. -+ * Copyright (C) 2003 MontaVista Softwrae, Inc. -+ * -+ * Maintainer: Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+ -+#include <asm/mach-types.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/pci.h> -+ -+extern void ixp4xx_pci_preinit(void); -+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); -+ -+void __init gateway7001_pci_preinit(void) -+{ -+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW); -+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); -+ -+ ixp4xx_pci_preinit(); -+} -+ -+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ if (slot == 1) -+ return IRQ_IXP4XX_GPIO11; -+ else if (slot == 2) -+ return IRQ_IXP4XX_GPIO10; -+ else return -1; -+} -+ -+struct hw_pci gateway7001_pci __initdata = { -+ .nr_controllers = 1, -+ .preinit = gateway7001_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = gateway7001_map_irq, -+}; -+ -+int __init gateway7001_pci_init(void) -+{ -+ if (machine_is_gateway7001()) -+ pci_common_init(&gateway7001_pci); -+ return 0; -+} -+ -+subsys_initcall(gateway7001_pci_init); -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-04-02 15:49:28.000000000 +0200 -@@ -0,0 +1,108 @@ -+/* -+ * arch/arm/mach-ixp4xx/gateway7001-setup.c -+ * -+ * Board setup for the Gateway 7001 board -+ * -+ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org> -+ * -+ * based on coyote-setup.c: -+ * Copyright (C) 2003-2005 MontaVista Software, Inc. -+ * -+ * Author: Imre Kaloz <Kaloz@openwrt.org> -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/serial.h> -+#include <linux/tty.h> -+#include <linux/serial_8250.h> -+#include <linux/slab.h> -+ -+#include <asm/types.h> -+#include <asm/setup.h> -+#include <asm/memory.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+static struct flash_platform_data gateway7001_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource gateway7001_flash_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device gateway7001_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &gateway7001_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &gateway7001_flash_resource, -+}; -+ -+static struct resource gateway7001_uart_resource = { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct plat_serial8250_port gateway7001_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { }, -+}; -+ -+static struct platform_device gateway7001_uart = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev = { -+ .platform_data = gateway7001_uart_data, -+ }, -+ .num_resources = 1, -+ .resource = &gateway7001_uart_resource, -+}; -+ -+static struct platform_device *gateway7001_devices[] __initdata = { -+ &gateway7001_flash, -+ &gateway7001_uart -+}; -+ -+static void __init gateway7001_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; -+ -+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; -+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; -+ -+ platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices)); -+} -+ -+#ifdef CONFIG_MACH_GATEWAY7001 -+MACHINE_START(GATEWAY7001, "Gateway 7001 AP") -+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, -+ .map_io = ixp4xx_map_io, -+ .init_irq = ixp4xx_init_irq, -+ .timer = &ixp4xx_timer, -+ .boot_params = 0x0100, -+ .init_machine = gateway7001_init, -+MACHINE_END -+#endif -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 15:39:28.000000000 +0200 -@@ -33,6 +33,14 @@ - Engineering Coyote Gateway Reference Platform. For more - information on this platform, see <file:Documentation/arm/IXP4xx>. - -+config MACH_GATEWAY7001 -+ bool "Gateway 7001" -+ select PCI -+ help -+ Say 'Y' here if you want your kernel to support Gateway's -+ 7001 Access Point. For more information on this platform, -+ see http://openwrt.org -+ - config ARCH_IXDP425 - bool "IXDP425" - help -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-02 15:49:49.000000000 +0200 -@@ -11,6 +11,7 @@ - obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o - obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o - obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o -+obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o - - obj-y += common.o - -@@ -20,5 +21,6 @@ - obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o - obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o - obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o -+obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o - - obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o -diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h ---- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 15:42:04.000000000 +0200 -@@ -38,9 +38,9 @@ - static __inline__ void __arch_decomp_setup(unsigned long arch_id) - { - /* -- * Coyote and gtwx5715 only have UART2 connected -+ * Some boards are using UART2 as console - */ -- if (machine_is_adi_coyote() || machine_is_gtwx5715()) -+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001()) - uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; - else - uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff --git a/target/linux/ixp4xx-2.6/patches/210-gateway_7001_setup_mac.patch b/target/linux/ixp4xx-2.6/patches/210-gateway_7001_setup_mac.patch deleted file mode 100644 index 8b3f4b92c5..0000000000 --- a/target/linux/ixp4xx-2.6/patches/210-gateway_7001_setup_mac.patch +++ /dev/null @@ -1,62 +0,0 @@ -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-04-02 15:56:39.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-04-02 15:57:38.000000000 +0200 -@@ -76,9 +76,57 @@ - .resource = &gateway7001_uart_resource, - }; - -+static struct resource res_mac0 = { -+ .start = IXP4XX_EthB_BASE_PHYS, -+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource res_mac1 = { -+ .start = IXP4XX_EthC_BASE_PHYS, -+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct mac_plat_info plat_mac0 = { -+ .npe_id = 1, -+ .phy_id = 1, -+ .eth_id = 0, -+ .rxq_id = 27, -+ .txq_id = 24, -+ .rxdoneq_id = 4, -+}; -+ -+static struct mac_plat_info plat_mac1 = { -+ .npe_id = 2, -+ .phy_id = 2, -+ .eth_id = 1, -+ .rxq_id = 28, -+ .txq_id = 25, -+ .rxdoneq_id = 5, -+}; -+ -+static struct platform_device mac0 = { -+ .name = "ixp4xx_mac", -+ .id = 0, -+ .dev.platform_data = &plat_mac0, -+ .num_resources = 1, -+ .resource = &res_mac0, -+}; -+ -+static struct platform_device mac1 = { -+ .name = "ixp4xx_mac", -+ .id = 1, -+ .dev.platform_data = &plat_mac1, -+ .num_resources = 1, -+ .resource = &res_mac1, -+}; -+ - static struct platform_device *gateway7001_devices[] __initdata = { - &gateway7001_flash, -- &gateway7001_uart -+ &gateway7001_uart, -+ &mac0, -+ &mac1, - }; - - static void __init gateway7001_init(void) diff --git a/target/linux/ixp4xx-2.6/patches/212-gateway_7001_mtd_microcode.patch b/target/linux/ixp4xx-2.6/patches/212-gateway_7001_mtd_microcode.patch deleted file mode 100644 index c15c5f66a8..0000000000 --- a/target/linux/ixp4xx-2.6/patches/212-gateway_7001_mtd_microcode.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- linux-2.6.21.5/arch/arm/mach-ixp4xx/gateway7001-setup.c.orig 2007-06-19 18:03:37.202848276 +0100 -+++ linux-2.6.21.5/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-06-19 18:09:04.152969985 +0100 -@@ -16,6 +16,7 @@ - #include <linux/device.h> - #include <linux/serial.h> - #include <linux/tty.h> -+#include <linux/mtd/mtd.h> - #include <linux/serial_8250.h> - #include <linux/slab.h> - -@@ -122,11 +123,48 @@ - .resource = &res_mac1, - }; - -+struct npe_ucode_platform_data gateway7001_npe_ucode_data = { -+ .mtd_partition = "microcode", -+}; -+ -+static struct platform_device gateway7001_npe_ucode = { -+ .name = "ixp4xx_npe_ucode", -+ .id = 0, -+ .dev.platform_data = &gateway7001_npe_ucode_data, -+}; -+ - static struct platform_device *gateway7001_devices[] __initdata = { - &gateway7001_flash, - &gateway7001_uart, - &mac0, - &mac1, -+ &gateway7001_npe_ucode, -+}; -+ -+static void gateway7001_flash_add(struct mtd_info *mtd) -+{ -+ if (strcmp(mtd->name, "RedBoot config") == 0) { -+ size_t retlen; -+ u_char mac0[6], mac1[6]; -+ if (mtd->read(mtd, 0x0422, 6, &retlen, mac0) == 0 && retlen == 6) { -+ printk(KERN_INFO "gateway 7001 mac0: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", -+ mac0[0], mac0[1], mac0[2], mac0[3], mac0[4], mac0[5]); -+ memcpy(plat_mac0.hwaddr, mac0, 6); -+ } -+ if (mtd->read(mtd, 0x043B, 6, &retlen, mac1) == 0 && retlen == 6) { -+ printk(KERN_INFO "gateway 7001 mac1: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", -+ mac1[0], mac1[1], mac1[2], mac1[3], mac1[4], mac1[5]); -+ memcpy(plat_mac1.hwaddr, mac1, 6); -+ } -+ } -+} -+ -+static void gateway7001_flash_remove(struct mtd_info *mtd) { -+} -+ -+static struct mtd_notifier gateway7001_flash_notifier = { -+ .add = gateway7001_flash_add, -+ .remove = gateway7001_flash_remove, - }; - - static void __init gateway7001_init(void) -@@ -140,6 +178,7 @@ - *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; - - platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices)); -+ register_mtd_user(&gateway7001_flash_notifier); - } - - #ifdef CONFIG_MACH_GATEWAY7001 diff --git a/target/linux/ixp4xx-2.6/patches/300-wg302v2.patch b/target/linux/ixp4xx-2.6/patches/300-wg302v2.patch deleted file mode 100644 index 8dc1d72d9e..0000000000 --- a/target/linux/ixp4xx-2.6/patches/300-wg302v2.patch +++ /dev/null @@ -1,231 +0,0 @@ -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:09:06.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:01:25.000000000 +0200 -@@ -41,6 +41,14 @@ - 7001 Access Point. For more information on this platform, - see http://openwrt.org - -+config MACH_WG302V2 -+ bool "Netgear WG302 v2 / WAG302 v2" -+ select PCI -+ help -+ Say 'Y' here if you want your kernel to support Netgear's -+ WG302 v2 or WAG302 v2 Access Points. For more information -+ on this platform, see http://openwrt.org -+ - config ARCH_IXDP425 - bool "IXDP425" - help -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-04-02 16:09:06.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-02 16:09:25.000000000 +0200 -@@ -12,6 +12,7 @@ - obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o - obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o - obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o -+obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o - - obj-y += common.o - -@@ -22,5 +23,6 @@ - obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o - obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o - obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o -+obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o - - obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-pci.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-pci.c 2007-04-02 16:00:12.000000000 +0200 -@@ -0,0 +1,68 @@ -+/* -+ * arch/arch/mach-ixp4xx/wg302v2-pci.c -+ * -+ * PCI setup routines for the Netgear WG302 v2 and WAG302 v2 -+ * -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * based on coyote-pci.c: -+ * Copyright (C) 2002 Jungo Software Technologies. -+ * Copyright (C) 2003 MontaVista Software, Inc. -+ * -+ * Maintainer: Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+ -+#include <asm/mach-types.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/pci.h> -+ -+extern void ixp4xx_pci_preinit(void); -+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); -+ -+void __init wg302v2_pci_preinit(void) -+{ -+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW); -+ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW); -+ -+ ixp4xx_pci_preinit(); -+} -+ -+static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ if (slot == 1) -+ return IRQ_IXP4XX_GPIO8; -+ else if (slot == 2) -+ return IRQ_IXP4XX_GPIO9; -+ else return -1; -+} -+ -+struct hw_pci wg302v2_pci __initdata = { -+ .nr_controllers = 1, -+ .preinit = wg302v2_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = wg302v2_map_irq, -+}; -+ -+int __init wg302v2_pci_init(void) -+{ -+ if (machine_is_wg302v2()) -+ pci_common_init(&wg302v2_pci); -+ return 0; -+} -+ -+subsys_initcall(wg302v2_pci_init); -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-04-02 16:08:57.000000000 +0200 -@@ -0,0 +1,107 @@ -+/* -+ * arch/arm/mach-ixp4xx/wg302-setup.c -+ * -+ * Board setup for the Netgear WG302 v2 and WAG302 v2 -+ * -+ * based on coyote-setup.c: -+ * Copyright (C) 2003-2005 MontaVista Software, Inc. -+ * -+ * Maintainer: Imre Kaloz <kaloz@openwrt.org> -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/serial.h> -+#include <linux/tty.h> -+#include <linux/serial_8250.h> -+#include <linux/slab.h> -+ -+#include <asm/types.h> -+#include <asm/setup.h> -+#include <asm/memory.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+static struct flash_platform_data wg302v2_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource wg302v2_flash_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device wg302v2_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &wg302v2_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &wg302v2_flash_resource, -+}; -+ -+static struct resource wg302v2_uart_resource = { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct plat_serial8250_port wg302v2_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { }, -+}; -+ -+static struct platform_device wg302v2_uart = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev = { -+ .platform_data = wg302v2_uart_data, -+ }, -+ .num_resources = 1, -+ .resource = &wg302v2_uart_resource, -+}; -+ -+static struct platform_device *wg302v2_devices[] __initdata = { -+ &wg302v2_flash, -+ &wg302v2_uart, -+}; -+ -+static void __init wg302v2_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; -+ -+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; -+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; -+ -+ platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices)); -+} -+ -+#ifdef CONFIG_MACH_WG302V2 -+MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") -+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, -+ .map_io = ixp4xx_map_io, -+ .init_irq = ixp4xx_init_irq, -+ .timer = &ixp4xx_timer, -+ .boot_params = 0x0100, -+ .init_machine = wg302v2_init, -+MACHINE_END -+#endif -diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h ---- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 16:09:06.000000000 +0200 -+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 16:02:04.000000000 +0200 -@@ -40,7 +40,7 @@ - /* - * Some boards are using UART2 as console - */ -- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001()) -+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2()) - uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; - else - uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff --git a/target/linux/ixp4xx-2.6/patches/310-wg302v2_setup_mac.patch b/target/linux/ixp4xx-2.6/patches/310-wg302v2_setup_mac.patch deleted file mode 100644 index 27616e15b3..0000000000 --- a/target/linux/ixp4xx-2.6/patches/310-wg302v2_setup_mac.patch +++ /dev/null @@ -1,37 +0,0 @@ -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-04-02 16:06:02.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-03-05 11:57:24.000000000 +0100 -@@ -75,9 +75,33 @@ - .resource = &wg302v2_uart_resource, - }; - -+static struct resource res_mac0 = { -+ .start = IXP4XX_EthB_BASE_PHYS, -+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct mac_plat_info plat_mac0 = { -+ .npe_id = 1, -+ .phy_id = 8, -+ .eth_id = 0, -+ .rxq_id = 27, -+ .txq_id = 24, -+ .rxdoneq_id = 4, -+}; -+ -+static struct platform_device mac0 = { -+ .name = "ixp4xx_mac", -+ .id = 0, -+ .dev.platform_data = &plat_mac0, -+ .num_resources = 1, -+ .resource = &res_mac0, -+}; -+ - static struct platform_device *wg302v2_devices[] __initdata = { - &wg302v2_flash, - &wg302v2_uart, -+ &mac0, - }; - - static void __init wg302v2_init(void) diff --git a/target/linux/ixp4xx-2.6/patches/400-pronghorn_metro.patch b/target/linux/ixp4xx-2.6/patches/400-pronghorn_metro.patch deleted file mode 100644 index 8b88e106e1..0000000000 --- a/target/linux/ixp4xx-2.6/patches/400-pronghorn_metro.patch +++ /dev/null @@ -1,251 +0,0 @@ -diff -Nur linux-2.6.21.1/Documentation/arm/IXP4xx linux-2.6.21.1-owrt/Documentation/arm/IXP4xx ---- linux-2.6.21.1/Documentation/arm/IXP4xx 2007-06-10 13:54:49.000000000 +0200 -+++ linux-2.6.21.1-owrt/Documentation/arm/IXP4xx 2007-06-10 13:46:37.000000000 +0200 -@@ -111,6 +111,9 @@ - the platform has two mini-PCI slots used for 802.11[bga] cards. - Finally, there is an IDE port hanging off the expansion bus. - -+ADI Engineering Pronghorn Metro Platform -+http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85 -+ - Gateworks Avila Network Platform - http://www.gateworks.com/avila_sbc.htm - -diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/Kconfig linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.21.1/arch/arm/mach-ixp4xx/Kconfig 2007-06-10 13:54:47.000000000 +0200 -+++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-06-10 13:46:37.000000000 +0200 -@@ -57,6 +57,14 @@ - WG302 v2 or WAG302 v2 Access Points. For more information - on this platform, see http://openwrt.org - -+config MACH_PRONGHORNMETRO -+ bool "Pronghorn Metro" -+ select PCI -+ help -+ Say 'Y' here if you want your kernel to support the ADI -+ Engineering Pronghorn Metro Platform. For more -+ information on this platform, see <file:Documentation/arm/IXP4xx>. -+ - config ARCH_IXDP425 - bool "IXDP425" - help -diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/Makefile linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.21.1/arch/arm/mach-ixp4xx/Makefile 2007-06-10 13:54:47.000000000 +0200 -+++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Makefile 2007-06-10 13:46:37.000000000 +0200 -@@ -14,6 +14,7 @@ - obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o - obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o - obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o -+obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o - - obj-y += common.o - -@@ -26,5 +27,6 @@ - obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o - obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o - obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o -+obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o - - obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o -diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-pci.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c ---- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 2007-06-10 13:50:08.000000000 +0200 -@@ -0,0 +1,74 @@ -+/* -+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c -+ * -+ * PCI setup routines for ADI Engineering Pronghorn Metro -+ * -+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * based on coyote-pci.c: -+ * Copyright (C) 2002 Jungo Software Technologies. -+ * Copyright (C) 2003 MontaVista Softwrae, Inc. -+ * -+ * Maintainer: Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+ -+#include <asm/mach-types.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/pci.h> -+ -+extern void ixp4xx_pci_preinit(void); -+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); -+ -+void __init pronghornmetro_pci_preinit(void) -+{ -+ set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW); -+ set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); -+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); -+ set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW); -+ -+ ixp4xx_pci_preinit(); -+} -+ -+static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ if (slot == 13) -+ return IRQ_IXP4XX_GPIO4; -+ else if (slot == 14) -+ return IRQ_IXP4XX_GPIO6; -+ else if (slot == 15) -+ return IRQ_IXP4XX_GPIO11; -+ else if (slot == 16) -+ return IRQ_IXP4XX_GPIO1; -+ else return -1; -+} -+ -+struct hw_pci pronghornmetro_pci __initdata = { -+ .nr_controllers = 1, -+ .preinit = pronghornmetro_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = pronghornmetro_map_irq, -+}; -+ -+int __init pronghornmetro_pci_init(void) -+{ -+ if (machine_is_pronghorn_metro()) -+ pci_common_init(&pronghornmetro_pci); -+ return 0; -+} -+ -+subsys_initcall(pronghornmetro_pci_init); -diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c ---- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 13:51:51.000000000 +0200 -@@ -0,0 +1,108 @@ -+/* -+ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c -+ * -+ * Board setup for the ADI Engineering Pronghorn Metro -+ * -+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org> -+ * -+ * based on coyote-setup.c: -+ * Copyright (C) 2003-2005 MontaVista Software, Inc. -+ * -+ * Author: Imre Kaloz <Kaloz@openwrt.org> -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/serial.h> -+#include <linux/tty.h> -+#include <linux/serial_8250.h> -+#include <linux/slab.h> -+ -+#include <asm/types.h> -+#include <asm/setup.h> -+#include <asm/memory.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+static struct flash_platform_data pronghornmetro_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource pronghornmetro_flash_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device pronghornmetro_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &pronghornmetro_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &pronghornmetro_flash_resource, -+}; -+ -+static struct resource pronghornmetro_uart_resource = { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct plat_serial8250_port pronghornmetro_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { }, -+}; -+ -+static struct platform_device pronghornmetro_uart = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev = { -+ .platform_data = pronghornmetro_uart_data, -+ }, -+ .num_resources = 1, -+ .resource = &pronghornmetro_uart_resource, -+}; -+ -+static struct platform_device *pronghornmetro_devices[] __initdata = { -+ &pronghornmetro_flash, -+ &pronghornmetro_uart, -+}; -+ -+static void __init pronghornmetro_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1; -+ -+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; -+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; -+ -+ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices)); -+} -+ -+#ifdef CONFIG_MACH_PRONGHORNMETRO -+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro") -+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, -+ .map_io = ixp4xx_map_io, -+ .init_irq = ixp4xx_init_irq, -+ .timer = &ixp4xx_timer, -+ .boot_params = 0x0100, -+ .init_machine = pronghornmetro_init, -+MACHINE_END -+#endif -diff -Nur linux-2.6.21.1/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.21.1-owrt/include/asm-arm/arch-ixp4xx/uncompress.h ---- linux-2.6.21.1/include/asm-arm/arch-ixp4xx/uncompress.h 2007-06-10 13:54:52.000000000 +0200 -+++ linux-2.6.21.1-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-06-10 13:49:37.000000000 +0200 -@@ -40,7 +40,7 @@ - /* - * Some boards are using UART2 as console - */ -- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2()) -+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro()) - uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; - else - uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff --git a/target/linux/ixp4xx-2.6/patches/410-pronghorn_metro_setup_mac.patch b/target/linux/ixp4xx-2.6/patches/410-pronghorn_metro_setup_mac.patch deleted file mode 100644 index 54621d6c3e..0000000000 --- a/target/linux/ixp4xx-2.6/patches/410-pronghorn_metro_setup_mac.patch +++ /dev/null @@ -1,61 +0,0 @@ -diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c ---- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:05:47.000000000 +0200 -+++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:05:38.000000000 +0200 -@@ -76,9 +76,57 @@ - .resource = &pronghornmetro_uart_resource, - }; - -+static struct resource res_mac0 = { -+ .start = IXP4XX_EthB_BASE_PHYS, -+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource res_mac1 = { -+ .start = IXP4XX_EthC_BASE_PHYS, -+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct mac_plat_info plat_mac0 = { -+ .npe_id = 1, -+ .phy_id = 0, -+ .eth_id = 0, -+ .rxq_id = 27, -+ .txq_id = 24, -+ .rxdoneq_id = 4, -+}; -+ -+static struct mac_plat_info plat_mac1 = { -+ .npe_id = 2, -+ .phy_id = 1, -+ .eth_id = 1, -+ .rxq_id = 28, -+ .txq_id = 25, -+ .rxdoneq_id = 5, -+}; -+ -+static struct platform_device mac0 = { -+ .name = "ixp4xx_mac", -+ .id = 0, -+ .dev.platform_data = &plat_mac0, -+ .num_resources = 1, -+ .resource = &res_mac0, -+}; -+ -+static struct platform_device mac1 = { -+ .name = "ixp4xx_mac", -+ .id = 1, -+ .dev.platform_data = &plat_mac1, -+ .num_resources = 1, -+ .resource = &res_mac1, -+}; -+ - static struct platform_device *pronghornmetro_devices[] __initdata = { - &pronghornmetro_flash, - &pronghornmetro_uart, -+ &mac0, -+ &mac1, - }; - - static void __init pronghornmetro_init(void) diff --git a/target/linux/ixp4xx-2.6/patches/420-pronghorn_metro_mtd_microcode.patch b/target/linux/ixp4xx-2.6/patches/420-pronghorn_metro_mtd_microcode.patch deleted file mode 100644 index 0c304c78ff..0000000000 --- a/target/linux/ixp4xx-2.6/patches/420-pronghorn_metro_mtd_microcode.patch +++ /dev/null @@ -1,55 +0,0 @@ -diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c ---- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:10:24.000000000 +0200 -+++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:10:15.000000000 +0200 -@@ -17,6 +17,7 @@ - #include <linux/serial.h> - #include <linux/tty.h> - #include <linux/serial_8250.h> -+#include <linux/mtd/mtd.h> - #include <linux/slab.h> - - #include <asm/types.h> -@@ -122,11 +123,34 @@ - .resource = &res_mac1, - }; - -+struct npe_ucode_platform_data pronghornmetro_npe_ucode_data = { -+ .mtd_partition = "RedBoot", -+}; -+ -+static struct platform_device pronghornmetro_npe_ucode = { -+ .name = "ixp4xx_npe_ucode", -+ .id = 0, -+ .dev.platform_data = &pronghornmetro_npe_ucode_data, -+}; -+ - static struct platform_device *pronghornmetro_devices[] __initdata = { - &pronghornmetro_flash, - &pronghornmetro_uart, - &mac0, - &mac1, -+ &pronghornmetro_npe_ucode, -+}; -+ -+static void pronghornmetro_flash_add(struct mtd_info *mtd) -+{ -+} -+ -+static void pronghornmetro_flash_remove(struct mtd_info *mtd) { -+} -+ -+static struct mtd_notifier pronghornmetro_flash_notifier = { -+ .add = pronghornmetro_flash_add, -+ .remove = pronghornmetro_flash_remove, - }; - - static void __init pronghornmetro_init(void) -@@ -140,6 +164,8 @@ - *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; - - platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices)); -+ -+ register_mtd_user(&pronghornmetro_flash_notifier); - } - - #ifdef CONFIG_MACH_PRONGHORNMETRO diff --git a/target/linux/ixp4xx-2.6/patches/430-pronghorn_metro_cf.patch b/target/linux/ixp4xx-2.6/patches/430-pronghorn_metro_cf.patch deleted file mode 100644 index d2982bc954..0000000000 --- a/target/linux/ixp4xx-2.6/patches/430-pronghorn_metro_cf.patch +++ /dev/null @@ -1,57 +0,0 @@ -diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c ---- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:31:27.000000000 +0200 -+++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:36:23.000000000 +0200 -@@ -77,6 +77,35 @@ - .resource = &pronghornmetro_uart_resource, - }; - -+static struct resource pronghornmetro_pata_resources[] = { -+ { -+ .flags = IORESOURCE_MEM -+ }, -+ { -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "intrq", -+ .start = IRQ_IXP4XX_GPIO0, -+ .end = IRQ_IXP4XX_GPIO0, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct ixp4xx_pata_data pronghornmetro_pata_data = { -+ .cs0_bits = 0xbfff0043, -+ .cs1_bits = 0xbfff0043, -+}; -+ -+static struct platform_device pronghornmetro_pata = { -+ .name = "pata_ixp4xx_cf", -+ .id = 0, -+ .dev.platform_data = &pronghornmetro_pata_data, -+ .num_resources = ARRAY_SIZE(pronghornmetro_pata_resources), -+ .resource = pronghornmetro_pata_resources, -+}; -+ -+ - static struct resource res_mac0 = { - .start = IXP4XX_EthB_BASE_PHYS, - .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -@@ -165,6 +194,17 @@ - - platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices)); - -+ pronghornmetro_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1); -+ pronghornmetro_pata_resources[0].end = IXP4XX_EXP_BUS_END(1); -+ -+ pronghornmetro_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2); -+ pronghornmetro_pata_resources[1].end = IXP4XX_EXP_BUS_END(2); -+ -+ pronghornmetro_pata_data.cs0_cfg = IXP4XX_EXP_CS1; -+ pronghornmetro_pata_data.cs1_cfg = IXP4XX_EXP_CS2; -+ -+ platform_device_register(&pronghornmetro_pata); -+ - register_mtd_user(&pronghornmetro_flash_notifier); - } - diff --git a/target/linux/ixp4xx-2.6/patches/500-compex.patch b/target/linux/ixp4xx-2.6/patches/500-compex.patch deleted file mode 100644 index 854194b35f..0000000000 --- a/target/linux/ixp4xx-2.6/patches/500-compex.patch +++ /dev/null @@ -1,184 +0,0 @@ -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-10 01:56:21.000000000 +0200 -@@ -0,0 +1,120 @@ -+/* -+ * arch/arm/mach-ixp4xx/compex-setup.c -+ * -+ * Ccompex WP18 / NP18A board-setup -+ * -+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org> -+ * -+ * based on ixdp425-setup.c: -+ * Copyright (C) 2003-2005 MontaVista Software, Inc. -+ * -+ * Author: Imre Kaloz <Kaloz@openwrt.org> -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/serial.h> -+#include <linux/tty.h> -+#include <linux/serial_8250.h> -+#include <linux/slab.h> -+ -+#include <asm/types.h> -+#include <asm/setup.h> -+#include <asm/memory.h> -+#include <asm/hardware.h> -+#include <asm/mach-types.h> -+#include <asm/irq.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+static struct flash_platform_data compex_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource compex_flash_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device compex_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &compex_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &compex_flash_resource, -+}; -+ -+static struct resource compex_uart_resources[] = { -+ { -+ .start = IXP4XX_UART1_BASE_PHYS, -+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM -+ }, -+ { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM -+ } -+}; -+ -+static struct plat_serial8250_port compex_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART1_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART1, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { }, -+}; -+ -+static struct platform_device compex_uart = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev.platform_data = compex_uart_data, -+ .num_resources = 2, -+ .resource = compex_uart_resources -+}; -+ -+static struct platform_device *compex_devices[] __initdata = { -+ &compex_flash, -+ &compex_uart -+}; -+ -+static void __init compex_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ compex_flash_resource.end = -+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; -+ -+ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices)); -+} -+ -+#ifdef CONFIG_MACH_COMPEX -+MACHINE_START(COMPEX, "Compex WP18 / NP18A") -+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, -+ .map_io = ixp4xx_map_io, -+ .init_irq = ixp4xx_init_irq, -+ .timer = &ixp4xx_timer, -+ .boot_params = 0x0100, -+ .init_machine = compex_init, -+MACHINE_END -+#endif -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-04-10 00:22:16.000000000 +0200 -@@ -66,7 +66,7 @@ - int __init ixdp425_pci_init(void) - { - if (machine_is_ixdp425() || machine_is_ixcdp1100() || -- machine_is_ixdp465()) -+ machine_is_ixdp465() || machine_is_compex()) - pci_common_init(&ixdp425_pci); - return 0; - } -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-04-10 00:33:31.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-10 00:48:37.000000000 +0200 -@@ -57,6 +57,14 @@ - Engineering Pronghorn Metro Platform. For more - information on this platform, see <file:Documentation/arm/IXP4xx>. - -+config MACH_COMPEX -+ bool "Compex WP18 / NP18A" -+ select PCI -+ help -+ Say 'Y' here if you want your kernel to support Compex' -+ WP18 or NP18A boards. For more information on this -+ platform, see http://openwrt.org -+ - config ARCH_IXDP425 - bool "IXDP425" - help -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-04-10 00:33:39.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-09 20:23:06.000000000 +0200 -@@ -14,6 +14,7 @@ - obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o - obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o - obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o -+obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o - - obj-y += common.o - -@@ -26,5 +27,6 @@ - obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o - obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o - obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o -+obj-$(CONFIG_MACH_COMPEX) += compex-setup.o - - obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o -diff -Nur linux-2.6.19.2/arch/arm/tools/mach-types linux-2.6.19.2-owrt/arch/arm/tools/mach-types ---- linux-2.6.19.2/arch/arm/tools/mach-types 2007-04-10 01:27:55.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/tools/mach-types 2007-04-09 20:22:33.000000000 +0200 -@@ -1278,7 +1278,7 @@ - smdk6400 MACH_SMDK6400 SMDK6400 1270 - nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271 - greenphone MACH_GREENPHONE GREENPHONE 1272 --compex42x MACH_COMPEXWP18 COMPEXWP18 1273 -+compex MACH_COMPEX COMPEX 1273 - xmate MACH_XMATE XMATE 1274 - energizer MACH_ENERGIZER ENERGIZER 1275 - ime1 MACH_IME1 IME1 1276 diff --git a/target/linux/ixp4xx-2.6/patches/510-compex_setup_mac.patch b/target/linux/ixp4xx-2.6/patches/510-compex_setup_mac.patch deleted file mode 100644 index ed85df0818..0000000000 --- a/target/linux/ixp4xx-2.6/patches/510-compex_setup_mac.patch +++ /dev/null @@ -1,62 +0,0 @@ -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 20:30:37.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 20:36:23.000000000 +0200 -@@ -90,9 +90,57 @@ - .resource = compex_uart_resources - }; - -+static struct resource res_mac0 = { -+ .start = IXP4XX_EthB_BASE_PHYS, -+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource res_mac1 = { -+ .start = IXP4XX_EthC_BASE_PHYS, -+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct mac_plat_info plat_mac0 = { -+ .npe_id = 1, -+ .phy_id = -1, -+ .eth_id = 0, -+ .rxq_id = 27, -+ .txq_id = 24, -+ .rxdoneq_id = 4, -+}; -+ -+static struct mac_plat_info plat_mac1 = { -+ .npe_id = 2, -+ .phy_id = 3, -+ .eth_id = 1, -+ .rxq_id = 28, -+ .txq_id = 25, -+ .rxdoneq_id = 5, -+}; -+ -+static struct platform_device mac0 = { -+ .name = "ixp4xx_mac", -+ .id = 0, -+ .dev.platform_data = &plat_mac0, -+ .num_resources = 1, -+ .resource = &res_mac0, -+}; -+ -+static struct platform_device mac1 = { -+ .name = "ixp4xx_mac", -+ .id = 1, -+ .dev.platform_data = &plat_mac1, -+ .num_resources = 1, -+ .resource = &res_mac1, -+}; -+ - static struct platform_device *compex_devices[] __initdata = { - &compex_flash, -- &compex_uart -+ &compex_uart, -+ &mac0, -+ &mac1, - }; - - static void __init compex_init(void) diff --git a/target/linux/ixp4xx-2.6/patches/520-compex_mtd_microcode.patch b/target/linux/ixp4xx-2.6/patches/520-compex_mtd_microcode.patch deleted file mode 100644 index 90842239c0..0000000000 --- a/target/linux/ixp4xx-2.6/patches/520-compex_mtd_microcode.patch +++ /dev/null @@ -1,55 +0,0 @@ -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 20:51:57.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-04-09 21:48:22.000000000 +0200 -@@ -17,6 +17,7 @@ - #include <linux/serial.h> - #include <linux/tty.h> - #include <linux/serial_8250.h> -+#include <linux/mtd/mtd.h> - #include <linux/slab.h> - - #include <asm/types.h> -@@ -136,11 +137,34 @@ - .resource = &res_mac1, - }; - -+struct npe_ucode_platform_data compex_npe_ucode_data = { -+ .mtd_partition = "RedBoot", -+}; -+ -+static struct platform_device compex_npe_ucode = { -+ .name = "ixp4xx_npe_ucode", -+ .id = 0, -+ .dev.platform_data = &compex_npe_ucode_data, -+}; -+ - static struct platform_device *compex_devices[] __initdata = { - &compex_flash, - &compex_uart, - &mac0, - &mac1, -+ &compex_npe_ucode, -+}; -+ -+static void compex_flash_add(struct mtd_info *mtd) -+{ -+} -+ -+static void compex_flash_remove(struct mtd_info *mtd) { -+} -+ -+static struct mtd_notifier compex_flash_notifier = { -+ .add = compex_flash_add, -+ .remove = compex_flash_remove, - }; - - static void __init compex_init(void) -@@ -152,6 +176,8 @@ - IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; - - platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices)); -+ -+ register_mtd_user(&compex_flash_notifier); - } - - #ifdef CONFIG_ARCH_COMPEX diff --git a/target/linux/ixp4xx-2.6/patches/600-wrt300nv2.patch b/target/linux/ixp4xx-2.6/patches/600-wrt300nv2.patch deleted file mode 100644 index 9697e5d5f2..0000000000 --- a/target/linux/ixp4xx-2.6/patches/600-wrt300nv2.patch +++ /dev/null @@ -1,229 +0,0 @@ -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-05-03 23:17:47.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-24 14:25:02.000000000 +0200 -@@ -65,6 +65,14 @@ - WP18 or NP18A boards. For more information on this - platform, see http://openwrt.org - -+config MACH_WRT300NV2 -+ bool "Linksys WRT300N v2" -+ select PCI -+ help -+ Say 'Y' here if you want your kernel to support Linksys' -+ WRT300N v2 router. For more information on this -+ platform, see http://openwrt.org -+ - config ARCH_IXDP425 - bool "IXDP425" - help -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-05-03 23:17:47.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-24 14:25:02.000000000 +0200 -@@ -15,6 +15,7 @@ - obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o - obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o - obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o -+obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o - - obj-y += common.o - -@@ -28,5 +29,6 @@ - obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o - obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o - obj-$(CONFIG_MACH_COMPEX) += compex-setup.o -+obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o - - obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 2007-05-10 10:40:54.000000000 +0200 -@@ -0,0 +1,65 @@ -+/* -+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c -+ * -+ * PCI setup routines for Linksys WRT300N v2 -+ * -+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * based on coyote-pci.c: -+ * Copyright (C) 2002 Jungo Software Technologies. -+ * Copyright (C) 2003 MontaVista Softwrae, Inc. -+ * -+ * Maintainer: Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+ -+#include <asm/mach-types.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+ -+#include <asm/mach/pci.h> -+ -+extern void ixp4xx_pci_preinit(void); -+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); -+ -+void __init wrt300nv2_pci_preinit(void) -+{ -+ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW); -+ -+ ixp4xx_pci_preinit(); -+} -+ -+static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ if (slot == 1) -+ return IRQ_IXP4XX_GPIO8; -+ else return -1; -+} -+ -+struct hw_pci wrt300nv2_pci __initdata = { -+ .nr_controllers = 1, -+ .preinit = wrt300nv2_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = wrt300nv2_map_irq, -+}; -+ -+int __init wrt300nv2_pci_init(void) -+{ -+ if (machine_is_wrt300nv2()) -+ pci_common_init(&wrt300nv2_pci); -+ return 0; -+} -+ -+subsys_initcall(wrt300nv2_pci_init); -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-05-03 23:16:53.000000000 +0200 -@@ -0,0 +1,108 @@ -+/* -+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c -+ * -+ * Board setup for the Linksys WRT300N v2 -+ * -+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org> -+ * -+ * based on coyote-setup.c: -+ * Copyright (C) 2003-2005 MontaVista Software, Inc. -+ * -+ * Author: Imre Kaloz <Kaloz@openwrt.org> -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/serial.h> -+#include <linux/tty.h> -+#include <linux/serial_8250.h> -+#include <linux/slab.h> -+ -+#include <asm/types.h> -+#include <asm/setup.h> -+#include <asm/memory.h> -+#include <asm/hardware.h> -+#include <asm/irq.h> -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+static struct flash_platform_data wrt300nv2_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource wrt300nv2_flash_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device wrt300nv2_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &wrt300nv2_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &wrt300nv2_flash_resource, -+}; -+ -+static struct resource wrt300nv2_uart_resource = { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct plat_serial8250_port wrt300nv2_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { }, -+}; -+ -+static struct platform_device wrt300nv2_uart = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev = { -+ .platform_data = wrt300nv2_uart_data, -+ }, -+ .num_resources = 1, -+ .resource = &wrt300nv2_uart_resource, -+}; -+ -+static struct platform_device *wrt300nv2_devices[] __initdata = { -+ &wrt300nv2_flash, -+ &wrt300nv2_uart -+}; -+ -+static void __init wrt300nv2_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; -+ -+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; -+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; -+ -+ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices)); -+} -+ -+#ifdef CONFIG_MACH_WRT300NV2 -+MACHINE_START(WRT300NV2, "Linksys WRT300N v2") -+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, -+ .map_io = ixp4xx_map_io, -+ .init_irq = ixp4xx_init_irq, -+ .timer = &ixp4xx_timer, -+ .boot_params = 0x0100, -+ .init_machine = wrt300nv2_init, -+MACHINE_END -+#endif -diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h ---- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-05-03 23:17:48.000000000 +0200 -+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-24 14:25:02.000000000 +0200 -@@ -40,7 +40,7 @@ - /* - * Some boards are using UART2 as console - */ -- if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro()) -+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro() || machine_is_wrt300nv2()) - uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; - else - uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff --git a/target/linux/ixp4xx-2.6/patches/610-wrt300nv2_setup_mac.patch b/target/linux/ixp4xx-2.6/patches/610-wrt300nv2_setup_mac.patch deleted file mode 100644 index 145ad76ef7..0000000000 --- a/target/linux/ixp4xx-2.6/patches/610-wrt300nv2_setup_mac.patch +++ /dev/null @@ -1,62 +0,0 @@ -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-04-24 14:25:02.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-04-24 14:31:09.000000000 +0200 -@@ -76,9 +76,57 @@ - .resource = &wrt300nv2_uart_resource, - }; - -+static struct resource res_mac0 = { -+ .start = IXP4XX_EthB_BASE_PHYS, -+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource res_mac1 = { -+ .start = IXP4XX_EthC_BASE_PHYS, -+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct mac_plat_info plat_mac0 = { -+ .npe_id = 1, -+ .phy_id = -1, -+ .eth_id = 0, -+ .rxq_id = 27, -+ .txq_id = 24, -+ .rxdoneq_id = 4, -+}; -+ -+static struct mac_plat_info plat_mac1 = { -+ .npe_id = 2, -+ .phy_id = 1, -+ .eth_id = 1, -+ .rxq_id = 28, -+ .txq_id = 25, -+ .rxdoneq_id = 5, -+}; -+ -+static struct platform_device mac0 = { -+ .name = "ixp4xx_mac", -+ .id = 0, -+ .dev.platform_data = &plat_mac0, -+ .num_resources = 1, -+ .resource = &res_mac0, -+}; -+ -+static struct platform_device mac1 = { -+ .name = "ixp4xx_mac", -+ .id = 1, -+ .dev.platform_data = &plat_mac1, -+ .num_resources = 1, -+ .resource = &res_mac1, -+}; -+ - static struct platform_device *wrt300nv2_devices[] __initdata = { - &wrt300nv2_flash, -- &wrt300nv2_uart -+ &wrt300nv2_uart, -+ &mac0, -+ &mac1, - }; - - static void __init wrt300nv2_init(void) diff --git a/target/linux/ixp4xx-2.6/patches/720-avila_setup_mac.patch b/target/linux/ixp4xx-2.6/patches/720-avila_setup_mac.patch deleted file mode 100644 index 3784852e31..0000000000 --- a/target/linux/ixp4xx-2.6/patches/720-avila_setup_mac.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- - arch/arm/mach-ixp4xx/avila-setup.c | 50 ++++++++++++++++++++++++++++++++++++- - 1 file changed, 49 insertions(+), 1 deletion(-) - -Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/avila-setup.c -+++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c -@@ -104,10 +104,60 @@ static struct platform_device avila_uart - .resource = avila_uart_resources - }; - -+/* MACs */ -+static struct resource res_mac0 = { -+ .start = IXP4XX_EthB_BASE_PHYS, -+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource res_mac1 = { -+ .start = IXP4XX_EthC_BASE_PHYS, -+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct mac_plat_info plat_mac0 = { -+ .npe_id = 1, -+ .phy_id = 0, -+ .eth_id = 0, -+ .rxq_id = 27, -+ .txq_id = 24, -+ .rxdoneq_id = 4, -+}; -+ -+static struct mac_plat_info plat_mac1 = { -+ .npe_id = 2, -+ .phy_id = 1, -+ .eth_id = 1, -+ .rxq_id = 28, -+ .txq_id = 25, -+ .rxdoneq_id = 5, -+}; -+ -+static struct platform_device mac0 = { -+ .name = "ixp4xx_mac", -+ .id = 0, -+ .dev.platform_data = &plat_mac0, -+ .num_resources = 1, -+ .resource = &res_mac0, -+}; -+ -+static struct platform_device mac1 = { -+ .name = "ixp4xx_mac", -+ .id = 1, -+ .dev.platform_data = &plat_mac1, -+ .num_resources = 1, -+ .resource = &res_mac1, -+}; -+ - static struct platform_device *avila_devices[] __initdata = { - &avila_i2c_controller, - &avila_flash, -- &avila_uart -+ &avila_uart, -+ &mac0, -+ &mac1, -+ - }; - - static void __init avila_init(void) diff --git a/target/linux/ixp4xx-2.6/patches/740-avila_loft_mac_platform.patch b/target/linux/ixp4xx-2.6/patches/740-avila_loft_mac_platform.patch deleted file mode 100644 index 952a05506e..0000000000 --- a/target/linux/ixp4xx-2.6/patches/740-avila_loft_mac_platform.patch +++ /dev/null @@ -1,50 +0,0 @@ -Index: linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c -=================================================================== ---- linux-2.6.19.orig/arch/arm/mach-ixp4xx/avila-setup.c 2007-01-23 03:12:36.000000000 -0800 -+++ linux-2.6.19/arch/arm/mach-ixp4xx/avila-setup.c 2007-01-23 03:12:47.000000000 -0800 -@@ -18,6 +18,10 @@ - #include <linux/tty.h> - #include <linux/serial_8250.h> - #include <linux/slab.h> -+#ifdef CONFIG_SENSORS_EEPROM -+#include <linux/i2c.h> -+#include <linux/eeprom.h> -+#endif - - #include <asm/types.h> - #include <asm/setup.h> -@@ -198,9 +202,34 @@ - &avila_npe_ucode, - }; - -+#ifdef CONFIG_SENSORS_EEPROM -+static int loft_eeprom_do(struct notifier_block *self, unsigned long event, void *t) -+{ -+ struct eeprom_data *data = t; -+ -+ char macs[12]; -+ -+ /* The MACs are the first 12 bytes in the eeprom at address 0x51 */ -+ if (event == EEPROM_REGISTER && data->client.addr == 0x51) { -+ data->attr->read(&data->client.dev.kobj, macs, 0, 12); -+ memcpy(&plat_mac0.hwaddr, macs, 6); -+ memcpy(&plat_mac1.hwaddr, macs + 6, 6); -+ } -+ -+ return NOTIFY_DONE; -+} -+ -+static struct notifier_block loft_eeprom_notifier = { -+ .notifier_call = loft_eeprom_do -+}; -+#endif -+ - static void __init avila_init(void) - { - ixp4xx_sys_init(); -+#ifdef CONFIG_SENSORS_EEPROM -+ register_eeprom_notifier(&loft_eeprom_notifier); -+#endif - - avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); - avila_flash_resource.end = diff --git a/target/linux/ixp4xx-2.6/patches/750-avila_mtd_microcode.patch b/target/linux/ixp4xx-2.6/patches/750-avila_mtd_microcode.patch deleted file mode 100644 index 0ecd3a5617..0000000000 --- a/target/linux/ixp4xx-2.6/patches/750-avila_mtd_microcode.patch +++ /dev/null @@ -1,28 +0,0 @@ -diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/avila-setup.c ---- linux-2.6.19.2/arch/arm/mach-ixp4xx/avila-setup.c 2007-05-10 12:30:54.000000000 +0200 -+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/avila-setup.c 2007-05-10 12:33:08.000000000 +0200 -@@ -155,13 +155,23 @@ - .resource = &res_mac1, - }; - -+struct npe_ucode_platform_data avila_npe_ucode_data = { -+ .mtd_partition = "RedBoot", -+}; -+ -+static struct platform_device avila_npe_ucode = { -+ .name = "ixp4xx_npe_ucode", -+ .id = 0, -+ .dev.platform_data = &avila_npe_ucode_data, -+}; -+ - static struct platform_device *avila_devices[] __initdata = { - &avila_i2c_controller, - &avila_flash, - &avila_uart, - &mac0, - &mac1, -- -+ &avila_npe_ucode, - }; - - #ifdef CONFIG_SENSORS_EEPROM diff --git a/target/linux/ixp4xx-2.6/patches/800-eeprom_new_notifier.patch b/target/linux/ixp4xx-2.6/patches/800-eeprom_new_notifier.patch deleted file mode 100644 index 79a097128c..0000000000 --- a/target/linux/ixp4xx-2.6/patches/800-eeprom_new_notifier.patch +++ /dev/null @@ -1,201 +0,0 @@ -Add EEPROM notifiers - -These help board level code by allowing a callback when EEPROMs are -loaded, this permits system level configuration to be loaded from the -EEPROM. This is particularly useful when the ethernet MAC ids are -stored in EEPROM and when the ethernet hardware is generic (so it -has no board level knowledge), then the MACs can be loaded into -the 'maclist' code and read out by the ethernet config. - -Signed-off-by: John Bowler <jbowler@acm.org> - -Index: linux-2.6.21-rc1-arm/drivers/i2c/chips/eeprom.c -=================================================================== ---- linux-2.6.21-rc1-arm.orig/drivers/i2c/chips/eeprom.c 2007-02-21 02:24:14.000000000 -0800 -+++ linux-2.6.21-rc1-arm/drivers/i2c/chips/eeprom.c 2007-02-21 02:25:01.000000000 -0800 -@@ -33,6 +33,8 @@ - #include <linux/jiffies.h> - #include <linux/i2c.h> - #include <linux/mutex.h> -+#include <linux/notifier.h> -+#include <linux/eeprom.h> - - /* Addresses to scan */ - static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, -@@ -41,26 +43,7 @@ - /* Insmod parameters */ - I2C_CLIENT_INSMOD_1(eeprom); - -- --/* Size of EEPROM in bytes */ --#define EEPROM_SIZE 256 -- --/* possible types of eeprom devices */ --enum eeprom_nature { -- UNKNOWN, -- VAIO, --}; -- --/* Each client has this additional data */ --struct eeprom_data { -- struct i2c_client client; -- struct mutex update_lock; -- u8 valid; /* bitfield, bit!=0 if slice is valid */ -- unsigned long last_updated[8]; /* In jiffies, 8 slices */ -- u8 data[EEPROM_SIZE]; /* Register values */ -- enum eeprom_nature nature; --}; -- -+ATOMIC_NOTIFIER_HEAD(eeprom_chain); - - static int eeprom_attach_adapter(struct i2c_adapter *adapter); - static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind); -@@ -189,6 +172,7 @@ - data->valid = 0; - mutex_init(&data->update_lock); - data->nature = UNKNOWN; -+ data->attr = &eeprom_attr; - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) -@@ -212,6 +196,9 @@ - if (err) - goto exit_detach; - -+ /* call the notifier chain */ -+ atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data); -+ - return 0; - - exit_detach: -@@ -237,6 +224,41 @@ - return 0; - } - -+/** -+ * register_eeprom_notifier - register a 'user' of EEPROM devices. -+ * @nb: pointer to notifier info structure -+ * -+ * Registers a callback function to be called upon detection -+ * of an EEPROM device. Detection invokes the 'add' callback -+ * with the kobj of the mutex and a bin_attribute which allows -+ * read from the EEPROM. The intention is that the notifier -+ * will be able to read system configuration from the notifier. -+ * -+ * Only EEPROMs detected *after* the addition of the notifier -+ * are notified. I.e. EEPROMs already known to the system -+ * will not be notified - add the notifier from board level -+ * code! -+ */ -+int register_eeprom_notifier(struct notifier_block *nb) -+{ -+ return atomic_notifier_chain_register(&eeprom_chain, nb); -+} -+ -+/** -+ * unregister_eeprom_notifier - unregister a 'user' of EEPROM devices. -+ * @old: pointer to notifier info structure -+ * -+ * Removes a callback function from the list of 'users' to be -+ * notified upon detection of EEPROM devices. -+ */ -+int unregister_eeprom_notifier(struct notifier_block *nb) -+{ -+ return atomic_notifier_chain_unregister(&eeprom_chain, nb); -+} -+ -+EXPORT_SYMBOL_GPL(register_eeprom_notifier); -+EXPORT_SYMBOL_GPL(unregister_eeprom_notifier); -+ - static int __init eeprom_init(void) - { - return i2c_add_driver(&eeprom_driver); -Index: linux-2.6.21-rc1-arm/include/linux/eeprom.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.21-rc1-arm/include/linux/eeprom.h 2007-02-21 02:25:01.000000000 -0800 -@@ -0,0 +1,71 @@ -+#ifndef _LINUX_EEPROM_H -+#define _LINUX_EEPROM_H -+/* -+ * $Id: 45-eeprom-new-notifier.patch,v 1.2 2006/03/27 11:10:19 azummo Exp $ -+ * -+ * Copyright (C) 2006 John Bowler -+ */ -+ -+/* -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __KERNEL__ -+#error This is a kernel header -+#endif -+ -+#include <linux/list.h> -+#include <linux/kobject.h> -+#include <linux/sysfs.h> -+ -+/* Size of EEPROM in bytes */ -+#define EEPROM_SIZE 256 -+ -+/* possible types of eeprom devices */ -+enum eeprom_nature { -+ UNKNOWN, -+ VAIO, -+}; -+ -+/* Each client has this additional data */ -+struct eeprom_data { -+ struct i2c_client client; -+ struct mutex update_lock; -+ u8 valid; /* bitfield, bit!=0 if slice is valid */ -+ unsigned long last_updated[8]; /* In jiffies, 8 slices */ -+ u8 data[EEPROM_SIZE]; /* Register values */ -+ enum eeprom_nature nature; -+ struct bin_attribute *attr; -+}; -+ -+/* -+ * This is very basic. -+ * -+ * If an EEPROM is detected on the I2C bus (this only works for -+ * I2C EEPROMs) the notifier chain is called with -+ * both the I2C information and the kobject for the sysfs -+ * device which has been registers. It is then possible to -+ * read from the device via the bin_attribute::read method -+ * to extract configuration information. -+ * -+ * Register the notifier in the board level code, there is no -+ * need to unregister it but you can if you want (it will save -+ * a little bit or kernel memory to do so). -+ */ -+ -+extern int register_eeprom_notifier(struct notifier_block *nb); -+extern int unregister_eeprom_notifier(struct notifier_block *nb); -+ -+#endif /* _LINUX_EEPROM_H */ -Index: linux-2.6.21-rc1-arm/include/linux/notifier.h -=================================================================== ---- linux-2.6.21-rc1-arm.orig/include/linux/notifier.h 2007-02-21 02:24:14.000000000 -0800 -+++ linux-2.6.21-rc1-arm/include/linux/notifier.h 2007-02-21 02:25:01.000000000 -0800 -@@ -187,5 +187,8 @@ - #define CPU_DOWN_FAILED 0x0006 /* CPU (unsigned)v NOT going down */ - #define CPU_DEAD 0x0007 /* CPU (unsigned)v dead */ - -+/* eeprom notifier chain */ -+#define EEPROM_REGISTER 0x0001 -+ - #endif /* __KERNEL__ */ - #endif /* _LINUX_NOTIFIER_H */ diff --git a/target/linux/ixp4xx-2.6/patches/900-no_loader_workaround.patch b/target/linux/ixp4xx-2.6/patches/900-no_loader_workaround.patch deleted file mode 100644 index f84f15b09e..0000000000 --- a/target/linux/ixp4xx-2.6/patches/900-no_loader_workaround.patch +++ /dev/null @@ -1,19 +0,0 @@ -diff -Nur linux-2.6.19/arch/arm/boot/compressed/head-xscale.S linux-2.6.19-owrt/arch/arm/boot/compressed/head-xscale.S ---- linux-2.6.19/arch/arm/boot/compressed/head-xscale.S 2006-12-19 12:56:21.000000000 +0100 -+++ linux-2.6.19-owrt/arch/arm/boot/compressed/head-xscale.S 2006-12-19 12:58:15.000000000 +0100 -@@ -41,6 +41,7 @@ - mov r7, #MACH_TYPE_COTULLA_IDP - #endif - -+/* let the arm-magic.sh script do the dirty work - #ifdef CONFIG_MACH_GTWX5715 - mov r7, #(MACH_TYPE_GTWX5715 & 0xff) - orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) -@@ -50,6 +51,7 @@ - mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff) - orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00) - #endif -+ */ - - #ifdef CONFIG_ARCH_IXP2000 - mov r1, #-1 diff --git a/target/linux/ixp4xx-2.6/patches/996-fsg3_support.patch b/target/linux/ixp4xx-2.6/patches/996-fsg3_support.patch deleted file mode 100644 index ecf5d750a5..0000000000 --- a/target/linux/ixp4xx-2.6/patches/996-fsg3_support.patch +++ /dev/null @@ -1,429 +0,0 @@ -Index: linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-pci.c -=================================================================== ---- /dev/null -+++ linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-pci.c -@@ -0,0 +1,71 @@ -+/* -+ * arch/arch/mach-ixp4xx/fsg-pci.c -+ * -+ * FSG board-level PCI initialization -+ * -+ * Author: Rod Whitby <rod@whitby.id.au> -+ * Maintainer: http://www.nslu2-linux.org/ -+ * -+ * based on ixdp425-pci.c: -+ * Copyright (C) 2002 Intel Corporation. -+ * Copyright (C) 2003-2004 MontaVista Software, Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/pci.h> -+#include <linux/init.h> -+#include <linux/irq.h> -+ -+#include <asm/mach/pci.h> -+#include <asm/mach-types.h> -+ -+void __init fsg_pci_preinit(void) -+{ -+ set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW); -+ set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW); -+ set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW); -+ -+ ixp4xx_pci_preinit(); -+} -+ -+static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ static int pci_irq_table[FSG_PCI_IRQ_LINES] = { -+ IRQ_FSG_PCI_INTC, -+ IRQ_FSG_PCI_INTB, -+ IRQ_FSG_PCI_INTA, -+ }; -+ -+ int irq = -1; -+ slot = slot - 11; -+ -+ if (slot >= 1 && slot <= FSG_PCI_MAX_DEV && -+ pin >= 1 && pin <= FSG_PCI_IRQ_LINES) { -+ irq = pci_irq_table[(slot - 1)]; -+ } -+ printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, irq); -+ -+ return irq; -+} -+ -+struct hw_pci fsg_pci __initdata = { -+ .nr_controllers = 1, -+ .preinit = fsg_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = fsg_map_irq, -+}; -+ -+int __init fsg_pci_init(void) -+{ -+ if (machine_is_fsg()) -+ pci_common_init(&fsg_pci); -+ return 0; -+} -+ -+subsys_initcall(fsg_pci_init); -Index: linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-setup.c -=================================================================== ---- /dev/null -+++ linux-2.6.21.5-armeb/arch/arm/mach-ixp4xx/fsg-setup.c -@@ -0,0 +1,223 @@ -+/* -+ * arch/arm/mach-ixp4xx/fsg-setup.c -+ * -+ * FSG board-setup -+ * -+ * based ixdp425-setup.c: -+ * Copyright (C) 2003-2004 MontaVista Software, Inc. -+ * -+ * Author: Rod Whitby <rod@whitby.id.au> -+ * Maintainers: http://www.nslu2-linux.org/ -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/serial.h> -+#include <linux/serial_8250.h> -+#include <linux/leds.h> -+#include <linux/mtd/mtd.h> -+ -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+ -+static struct flash_platform_data fsg_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource fsg_flash_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device fsg_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev.platform_data = &fsg_flash_data, -+ .num_resources = 1, -+ .resource = &fsg_flash_resource, -+}; -+ -+static struct ixp4xx_i2c_pins fsg_i2c_gpio_pins = { -+ .sda_pin = FSG_SDA_PIN, -+ .scl_pin = FSG_SCL_PIN, -+}; -+ -+static struct platform_device fsg_i2c_controller = { -+ .name = "IXP4XX-I2C", -+ .id = 0, -+ .dev.platform_data = &fsg_i2c_gpio_pins, -+ .num_resources = 0, -+}; -+ -+static struct resource fsg_uart_resources[] = { -+ { -+ .start = IXP4XX_UART1_BASE_PHYS, -+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct plat_serial8250_port fsg_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART1_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART1, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { } -+}; -+ -+static struct platform_device fsg_uart = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev.platform_data = fsg_uart_data, -+ .num_resources = ARRAY_SIZE(fsg_uart_resources), -+ .resource = fsg_uart_resources, -+}; -+ -+/* Built-in 10/100 Ethernet MAC interfaces */ -+static struct resource res_mac0 = { -+ .start = IXP4XX_EthB_BASE_PHYS, -+ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource res_mac1 = { -+ .start = IXP4XX_EthC_BASE_PHYS, -+ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct mac_plat_info plat_mac0 = { -+ .npe_id = 1, -+ .phy_id = 5, -+ .eth_id = 0, -+ .rxq_id = 27, -+ .txq_id = 24, -+ .rxdoneq_id = 4, -+}; -+ -+static struct mac_plat_info plat_mac1 = { -+ .npe_id = 2, -+ .phy_id = 4, -+ .eth_id = 1, -+ .rxq_id = 28, -+ .txq_id = 25, -+ .rxdoneq_id = 5, -+}; -+ -+static struct platform_device mac0 = { -+ .name = "ixp4xx_mac", -+ .id = 0, -+ .dev.platform_data = &plat_mac0, -+ .num_resources = 1, -+ .resource = &res_mac0, -+}; -+ -+static struct platform_device mac1 = { -+ .name = "ixp4xx_mac", -+ .id = 1, -+ .dev.platform_data = &plat_mac1, -+ .num_resources = 1, -+ .resource = &res_mac1, -+}; -+ -+struct npe_ucode_platform_data fsg_npe_ucode_data = { -+ .mtd_partition = "microcode", -+}; -+ -+static struct platform_device fsg_npe_ucode = { -+ .name = "ixp4xx_npe_ucode", -+ .id = 0, -+ .dev.platform_data = &fsg_npe_ucode_data, -+}; -+ -+static struct platform_device *fsg_devices[] __initdata = { -+ &fsg_i2c_controller, -+ &fsg_flash, -+ &mac0, -+ &mac1, -+ &fsg_npe_ucode, -+}; -+ -+static void fsg_flash_add(struct mtd_info *mtd) -+{ -+ if (strcmp(mtd->name, "RedBoot config") == 0) { -+ size_t retlen; -+ u_char mac[6]; -+ -+ if (mtd->read(mtd, 0x0422, 6, &retlen, mac) == 0 && retlen == 6) { -+ printk(KERN_INFO "eth0 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", -+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); -+ memcpy(plat_mac0.hwaddr, mac, 6); -+ mac[5]++; -+ printk(KERN_INFO "eth1 mac: %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", -+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); -+ memcpy(plat_mac1.hwaddr, mac, 6); -+ } else { -+ printk(KERN_ERR "fsg mac: read failed\n"); -+ } -+ } -+} -+ -+static void fsg_flash_remove(struct mtd_info *mtd) { -+} -+ -+static struct mtd_notifier fsg_flash_notifier = { -+ .add = fsg_flash_add, -+ .remove = fsg_flash_remove, -+}; -+ -+static void __init fsg_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ fsg_flash_resource.end = -+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; -+ -+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; -+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; -+ -+ /* Configure CS2 for operation, 8bit and writable */ -+ *IXP4XX_EXP_CS2 = 0xbfff0002; -+ -+ /* This is only useful on a modified machine, but it is valuable -+ * to have it first in order to see debug messages, and so that -+ * it does *not* get removed if platform_add_devices fails! -+ */ -+ (void)platform_device_register(&fsg_uart); -+ -+ platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices)); -+ -+ register_mtd_user(&fsg_flash_notifier); -+} -+ -+MACHINE_START(FSG, "Freecom FSG-3") -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, -+ .map_io = ixp4xx_map_io, -+ .init_irq = ixp4xx_init_irq, -+ .timer = &ixp4xx_timer, -+ .boot_params = 0x0100, -+ .init_machine = fsg_init, -+MACHINE_END -+ -Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/fsg.h -=================================================================== ---- /dev/null -+++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/fsg.h -@@ -0,0 +1,58 @@ -+/* -+ * include/asm-arm/arch-ixp4xx/fsg.h -+ * -+ * Freecom FSG-3 platform specific definitions -+ * -+ * Author: Rod Whitby <rod@whitby.id.au> -+ * Author: Tomasz Chmielewski <mangoo@wpkg.org> -+ * Maintainers: http://www.nslu2-linux.org -+ * -+ * Based on coyote.h by -+ * Copyright 2004 (c) MontaVista, Software, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#ifndef __ASM_ARCH_HARDWARE_H__ -+#error "Do not include this directly, instead #include <asm/hardware.h>" -+#endif -+ -+#define FSG_SDA_PIN 12 -+#define FSG_SCL_PIN 13 -+ -+/* -+ * FSG PCI IRQs -+ */ -+#define FSG_PCI_MAX_DEV 3 -+#define FSG_PCI_IRQ_LINES 3 -+ -+ -+/* PCI controller GPIO to IRQ pin mappings */ -+#define FSG_PCI_INTA_PIN 6 -+#define FSG_PCI_INTB_PIN 7 -+#define FSG_PCI_INTC_PIN 5 -+ -+/* Buttons */ -+ -+#define FSG_SB_GPIO 4 -+#define FSG_RB_GPIO 9 -+#define FSG_UB_GPIO 10 -+ -+#define FSG_SB_IRQ IRQ_IXP4XX_GPIO4 -+#define FSG_RB_IRQ IRQ_IXP4XX_GPIO9 -+#define FSG_UB_IRQ IRQ_IXP4XX_GPIO10 -+ -+#define FSG_SB_BM (1L << FSG_SB_GPIO) -+#define FSG_RB_BM (1L << FSG_RB_GPIO) -+#define FSG_UB_BM (1L << FSG_UB_GPIO) -+ -+/* LEDs */ -+ -+#define FSG_LED_RING_BIT 0 -+#define FSG_LED_SYNC_BIT 1 -+#define FSG_LED_USB_BIT 2 -+#define FSG_LED_SATA_BIT 3 -+#define FSG_LED_WAN_BIT 4 -+#define FSG_LED_WLAN_BIT 5 -Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/hardware.h -=================================================================== ---- linux-2.6.21.5-armeb.orig/include/asm-arm/arch-ixp4xx/hardware.h -+++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/hardware.h -@@ -48,5 +48,6 @@ extern unsigned int processor_id; - #include "nslu2.h" - #include "nas100d.h" - #include "dsmg600.h" -+#include "fsg.h" - - #endif /* _ASM_ARCH_HARDWARE_H */ -Index: linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/irqs.h -=================================================================== ---- linux-2.6.21.5-armeb.orig/include/asm-arm/arch-ixp4xx/irqs.h -+++ linux-2.6.21.5-armeb/include/asm-arm/arch-ixp4xx/irqs.h -@@ -128,4 +128,11 @@ - #define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7 - #define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6 - -+/* -+ * Freecom FSG-3 board IRQs -+ */ -+#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6 -+#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7 -+#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5 -+ - #endif ---- linux-2.6.21.6/arch/arm/mach-ixp4xx/Makefile~ 2007-07-11 22:20:52.000000000 +0930 -+++ linux-2.6.21.6/arch/arm/mach-ixp4xx/Makefile 2007-07-11 22:22:02.000000000 +0930 -@@ -13,6 +13,7 @@ - obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o - obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o - obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o -+obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o - obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o - obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o - obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o -@@ -29,6 +30,7 @@ - obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o - obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o - obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o -+obj-$(CONFIG_MACH_FSG) += fsg-setup.o - obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o - obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o - obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o ---- linux-2.6.21.6/arch/arm/mach-ixp4xx/Kconfig~ 2007-07-11 22:23:24.000000000 +0930 -+++ linux-2.6.21.6/arch/arm/mach-ixp4xx/Kconfig 2007-07-11 22:23:47.000000000 +0930 -@@ -138,6 +138,14 @@ - DSM-G600 RevA device. For more information on this platform, - see http://www.nslu2-linux.org/wiki/DSMG600/HomePage - -+config MACH_FSG -+ bool -+ prompt "Freecom FSG-3" -+ help -+ Say 'Y' here if you want your kernel to support Freecom's -+ FSG-3 device. For more information on this -+ platform see http://www.openfsg.com/ -+ - # - # Avila and IXDP share the same source for now. Will change in future - # |